-/* tc-m68k.c All the m68020 specific stuff in one convenient, huge,
- slow to compile, easy to find file.
-
- Copyright (C) 1987, 1991, 1992, 1993 Free Software Foundation, Inc.
+/* tc-m68k.c -- Assemble for the m68k family
+ Copyright (C) 1987, 91, 92, 93, 94, 95, 96, 1997
+ Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
#include <ctype.h>
-#define NO_RELOC 0
#include "as.h"
-
-/* need TARGET_CPU */
-#include "config.h"
-
#include "obstack.h"
+#include "subsegs.h"
-/* The opcode table is too big for gcc, which (currently) requires
- exponential space at compile time for initialized arrays. */
-#ifdef __GNUC__
-#define DO_BREAK_UP_BIG_DECL
-#define BREAK_UP_BIG_DECL }; struct m68k_opcode m68k_opcodes_2[] = {
-#define AND_OTHER_PART sizeof (m68k_opcodes_2)
-#endif
-
-/* Note that this file includes real declarations and thus can only be
- included by one source file per executable. */
#include "opcode/m68k.h"
-
-/* This array holds the chars that always start a comment. If the
- pre-processor is disabled, these aren't very useful */
-CONST char comment_chars[] = "|";
+#include "m68k-parse.h"
+
+/* This string holds the chars that always start a comment. If the
+ pre-processor is disabled, these aren't very useful. The macro
+ tc_comment_chars points to this. We use this, rather than the
+ usual comment_chars, so that the --bitwise-or option will work. */
+#if (defined (OBJ_ELF) && ! defined (TE_PSOS) && ! defined (TE_LINUX)) || defined (TE_DELTA)
+const char *m68k_comment_chars = "|#";
+#else
+const char *m68k_comment_chars = "|";
+#endif
/* This array holds the chars that only start a comment at the beginning of
a line. If the line seems to have the form '# 123 filename'
first line of the input file. This is because the compiler outputs
#NO_APP at the beginning of its output. */
/* Also note that comments like this one will always work. */
-CONST char line_comment_chars[] = "#";
+const char line_comment_chars[] = "#";
-CONST char line_separator_chars[] = "";
+const char line_separator_chars[] = "";
/* Chars that can be used to separate mant from exp in floating point nums */
CONST char EXP_CHARS[] = "eE";
/* Are we trying to generate PIC code? If so, absolute references
ought to be made into linkage table references or pc-relative
- references. */
+ references. Not implemented. For ELF there are other means
+ to denote pic relocations. */
int flag_want_pic;
static int flag_short_refs; /* -l option */
int flag_reg_prefix_optional;
#endif
+/* Whether --register-prefix-optional was used on the command line. */
+static int reg_prefix_optional_seen;
+
+/* The floating point coprocessor to use by default. */
+static enum m68k_register m68k_float_copnum = COP1;
+
+/* If this is non-zero, then references to number(%pc) will be taken
+ to refer to number, rather than to %pc + number. */
+static int m68k_abspcadd;
+
+/* If this is non-zero, then the quick forms of the move, add, and sub
+ instructions are used when possible. */
+static int m68k_quick = 1;
+
+/* If this is non-zero, then if the size is not specified for a base
+ or outer displacement, the assembler assumes that the size should
+ be 32 bits. */
+static int m68k_rel32 = 1;
+
+/* This is non-zero if m68k_rel32 was set from the command line. */
+static int m68k_rel32_from_cmdline;
+
+/* The default width to use for an index register when using a base
+ displacement. */
+static enum m68k_size m68k_index_width_default = SIZE_LONG;
+
+/* We want to warn if any text labels are misaligned. In order to get
+ the right line number, we need to record the line number for each
+ label. */
+
+struct label_line
+{
+ struct label_line *next;
+ symbolS *label;
+ char *file;
+ unsigned int line;
+ int text;
+};
+
+/* The list of labels. */
+
+static struct label_line *labels;
+
+/* The current label. */
+
+static struct label_line *current_label;
+
/* Its an arbitrary name: This means I don't approve of it */
/* See flames below */
static struct obstack robyn;
#define LONG 2
#define SZ_UNDEF 3
#undef BRANCH
+/* Case `g' except when BCC68000 is applicable. */
#define ABRANCH 1
+/* Coprocessor branches. */
#define FBRANCH 2
+/* Mode 7.2 -- program counter indirect with (16-bit) displacement,
+ supported on all cpus. Widens to 32-bit absolute. */
#define PCREL 3
+/* For inserting an extra jmp instruction with long offset on 68000,
+ for expanding conditional branches. (Not bsr or bra.) Since the
+ 68000 doesn't support 32-bit displacements for conditional
+ branches, we fake it by reversing the condition and branching
+ around a jmp with an absolute long operand. */
#define BCC68000 4
+/* For the DBcc "instructions". If the displacement requires 32 bits,
+ the branch-around-a-jump game is played here too. */
#define DBCC 5
+/* Not currently used? */
#define PCLEA 6
+/* Mode AINDX (apc-relative) using PC, with variable target, might fit
+ in 16 or 8 bits. */
+#define PCINDEX 7
struct m68k_incant
{
- char *m_operands;
+ const char *m_operands;
unsigned long m_opcode;
short m_opnum;
short m_codenum;
#define getone(x) ((((x)->m_opcode)>>16)&0xffff)
#define gettwo(x) (((x)->m_opcode)&0xffff)
-/* Operands we can parse: (And associated modes)
-
- numb: 8 bit num
- numw: 16 bit num
- numl: 32 bit num
- dreg: data reg 0-7
- reg: address or data register
- areg: address register
- apc: address register, PC, ZPC or empty string
- num: 16 or 32 bit num
- num2: like num
- sz: w or l if omitted, l assumed
- scale: 1 2 4 or 8 if omitted, 1 assumed
-
- 7.4 IMMED #num --> NUM
- 0.? DREG dreg --> dreg
- 1.? AREG areg --> areg
- 2.? AINDR areg@ --> *(areg)
- 3.? AINC areg@+ --> *(areg++)
- 4.? ADEC areg@- --> *(--areg)
- 5.? AOFF apc@(numw) --> *(apc+numw) -- empty string and ZPC not allowed here
- 6.? AINDX apc@(num,reg:sz:scale) --> *(apc+num+reg*scale)
- 6.? AINDX apc@(reg:sz:scale) --> same, with num=0
- 6.? APODX apc@(num)@(num2,reg:sz:scale) --> *(*(apc+num)+num2+reg*scale)
- 6.? APODX apc@(num)@(reg:sz:scale) --> same, with num2=0
- 6.? AMIND apc@(num)@(num2) --> *(*(apc+num)+num2) (previous mode without an index reg)
- 6.? APRDX apc@(num,reg:sz:scale)@(num2) --> *(*(apc+num+reg*scale)+num2)
- 6.? APRDX apc@(reg:sz:scale)@(num2) --> same, with num=0
- 7.0 ABSL num:sz --> *(num)
- num --> *(num) (sz L assumed)
- *** MSCR otherreg --> Magic
- With -l option
- 5.? AOFF apc@(num) --> *(apc+num) -- empty string and ZPC not allowed here still
- ?.? DINDR dreg@ --> (dreg) -- cas2 only
-
- examples:
- #foo #0x35 #12
- d2
- a4
- a3@
- a5@+
- a6@-
- a2@(12) pc@(14)
- a1@(5,d2:w:1) @(45,d6:l:4)
- pc@(a2) @(d4)
- etc . . .
-
-
- #name@(numw) -->turn into PC rel mode
- apc@(num8,reg:sz:scale) --> *(apc+num8+reg*scale)
-
- */
-
-enum operand_type
- {
- IMMED = 1,
- DREG,
- AREG,
- AINDR,
- ADEC,
- AINC,
- AOFF,
- AINDX,
- APODX,
- AMIND,
- APRDX,
- ABSL,
- MSCR,
- REGLST,
- DINDR
- };
-
-
-struct m68k_exp
- {
- char *e_beg;
- char *e_end;
- segT e_seg;
- expressionS e_exp;
- short e_siz; /* 0== default 1==short/byte 2==word 3==long */
- };
-
-/* DATA and ADDR have to be contiguous, so that reg-DATA gives
- 0-7==data reg, 8-15==addr reg for operands that take both types.
-
- We don't use forms like "ADDR0 = ADDR" here because this file is
- likely to be used on an Apollo, and the broken Apollo compiler
- gives an `undefined variable' error if we do that, according to
- troy@cbme.unsw.edu.au. */
-
-#define DATA DATA0
-#define ADDR ADDR0
-#define SP ADDR7
-#define FPREG FP0
-#define COPNUM COP0
-#define BAD BAD0
-#define BAC BAC0
-
-enum _register
- {
- DATA0 = 1, /* 1- 8 == data registers 0-7 */
- DATA1,
- DATA2,
- DATA3,
- DATA4,
- DATA5,
- DATA6,
- DATA7,
-
- ADDR0,
- ADDR1,
- ADDR2,
- ADDR3,
- ADDR4,
- ADDR5,
- ADDR6,
- ADDR7,
-
- /* Note that COP0==processor #1 -- COP0+7==#8, which stores as 000 */
- /* I think. . . */
-
- FP0, /* Eight FP registers */
- FP1,
- FP2,
- FP3,
- FP4,
- FP5,
- FP6,
- FP7,
-
- COP0, /* Co-processor #1-#8 */
- COP1,
- COP2,
- COP3,
- COP4,
- COP5,
- COP6,
- COP7,
-
- PC, /* Program counter */
- ZPC, /* Hack for Program space, but 0 addressing */
- SR, /* Status Reg */
- CCR, /* Condition code Reg */
-
- /* These have to be grouped together for the movec instruction to work. */
- USP, /* User Stack Pointer */
- ISP, /* Interrupt stack pointer */
- SFC,
- DFC,
- CACR,
- VBR,
- CAAR,
- MSP,
- ITT0,
- ITT1,
- DTT0,
- DTT1,
- MMUSR,
- TC,
- SRP,
- URP,
- BUSCR, /* 68060 added these */
- PCR,
-#define last_movec_reg PCR
- /* end of movec ordering constraints */
-
- FPI,
- FPS,
- FPC,
-
- DRP, /* 68851 or 68030 MMU regs */
- CRP,
- CAL,
- VAL,
- SCC,
- AC,
- BAD0,
- BAD1,
- BAD2,
- BAD3,
- BAD4,
- BAD5,
- BAD6,
- BAD7,
- BAC0,
- BAC1,
- BAC2,
- BAC3,
- BAC4,
- BAC5,
- BAC6,
- BAC7,
- PSR, /* aka MMUSR on 68030 (but not MMUSR on 68040)
- and ACUSR on 68ec030 */
- PCSR,
-
- IC, /* instruction cache token */
- DC, /* data cache token */
- NC, /* no cache token */
- BC, /* both caches token */
-
- TT0, /* 68030 access control unit regs */
- TT1,
- };
-
-static const enum _register m68000_control_regs[] = { 0 };
-static const enum _register m68010_control_regs[] = {
+static const enum m68k_register m68000_control_regs[] = { 0 };
+static const enum m68k_register m68010_control_regs[] = {
SFC, DFC, USP, VBR,
0
};
-static const enum _register m68020_control_regs[] = {
+static const enum m68k_register m68020_control_regs[] = {
SFC, DFC, USP, VBR, CACR, CAAR, MSP, ISP,
0
};
-static const enum _register m68040_control_regs[] = {
+static const enum m68k_register m68040_control_regs[] = {
SFC, DFC, CACR, TC, ITT0, ITT1, DTT0, DTT1,
USP, VBR, MSP, ISP, MMUSR, URP, SRP,
0
};
-static const enum _register m68060_control_regs[] = {
+static const enum m68k_register m68060_control_regs[] = {
SFC, DFC, CACR, TC, ITT0, ITT1, DTT0, DTT1, BUSCR,
USP, VBR, URP, SRP, PCR,
0
};
+static const enum m68k_register mcf5200_control_regs[] = {
+ CACR, TC, ITT0, ITT1, DTT0, DTT1, VBR, ROMBAR,
+ RAMBAR0, RAMBAR1, MBAR,
+ 0
+};
+#define cpu32_control_regs m68010_control_regs
-static const enum _register *control_regs;
-
-/* Internal form of an operand. */
-struct m68k_op
- {
- char *error; /* Couldn't parse it */
- enum operand_type mode; /* What mode this instruction is in. */
- enum _register reg; /* Base register */
- struct m68k_exp *con1;
- int ireg; /* Index register */
- int isiz; /* 0==unspec 1==byte(?) 2==short 3==long */
- int imul; /* Multipy ireg by this (1,2,4,or 8) */
- struct m68k_exp *con2;
- };
+static const enum m68k_register *control_regs;
/* internal form of a 68020 instruction */
struct m68k_it
- {
- char *error;
- char *args; /* list of opcode info */
- int numargs;
+{
+ const char *error;
+ const char *args; /* list of opcode info */
+ int numargs;
- int numo; /* Number of shorts in opcode */
- short opcode[11];
+ int numo; /* Number of shorts in opcode */
+ short opcode[11];
- struct m68k_op operands[6];
+ struct m68k_op operands[6];
- int nexp; /* number of exprs in use */
- struct m68k_exp exprs[4];
+ int nexp; /* number of exprs in use */
+ struct m68k_exp exprs[4];
- int nfrag; /* Number of frags we have to produce */
- struct
- {
- int fragoff; /* Where in the current opcode[] the frag ends */
- symbolS *fadd;
- long foff;
- int fragty;
- }
- fragb[4];
+ int nfrag; /* Number of frags we have to produce */
+ struct
+ {
+ int fragoff; /* Where in the current opcode the frag ends */
+ symbolS *fadd;
+ long foff;
+ int fragty;
+ }
+ fragb[4];
- int nrel; /* Num of reloc strucs in use */
- struct
- {
- int n;
- expressionS exp;
- char wid;
- char pcrel;
- }
- reloc[5]; /* Five is enough??? */
- };
+ int nrel; /* Num of reloc strucs in use */
+ struct
+ {
+ int n;
+ expressionS exp;
+ char wid;
+ char pcrel;
+ /* In a pc relative address the difference between the address
+ of the offset and the address that the offset is relative
+ to. This depends on the addressing mode. Basically this
+ is the value to put in the offset field to address the
+ first byte of the offset, without regarding the special
+ significance of some values (in the branch instruction, for
+ example). */
+ int pcrel_fix;
+#ifdef OBJ_ELF
+ /* Whether this expression needs special pic relocation, and if
+ so, which. */
+ enum pic_relocation pic_reloc;
+#endif
+ }
+ reloc[5]; /* Five is enough??? */
+};
-#define cpu_of_arch(x) ((x) & m68000up)
+#define cpu_of_arch(x) ((x) & (m68000up|mcf5200))
#define float_of_arch(x) ((x) & mfloat)
#define mmu_of_arch(x) ((x) & mmmu)
static struct m68k_it the_ins; /* the instruction being assembled */
-#define seg(exp) ((exp)->e_seg)
-#define op(exp) ((exp)->e_exp.X_op)
-#define adds(exp) ((exp)->e_exp.X_add_symbol)
-#define subs(exp) ((exp)->e_exp.X_op_symbol)
-#define offs(exp) ((exp)->e_exp.X_add_number)
+#define op(ex) ((ex)->exp.X_op)
+#define adds(ex) ((ex)->exp.X_add_symbol)
+#define subs(ex) ((ex)->exp.X_op_symbol)
+#define offs(ex) ((ex)->exp.X_add_number)
/* Macros for adding things to the m68k_it struct */
the_ins.opcode[z]=the_ins.opcode[z-1];
for(z=0;z<the_ins.nrel;z++)
the_ins.reloc[z].n+=2;
+ for (z = 0; z < the_ins.nfrag; z++)
+ the_ins.fragb[z].fragoff++;
the_ins.opcode[opcode->m_codenum]=w;
the_ins.numo++;
}
-static struct m68k_exp *
-add_exp (beg, end)
- char *beg;
- char *end;
-{
- the_ins.exprs[the_ins.nexp].e_beg=beg;
- the_ins.exprs[the_ins.nexp].e_end=end;
- return &the_ins.exprs[the_ins.nexp++];
-}
-
-
/* The numo+1 kludge is so we can hit the low order byte of the prev word.
Blecch. */
static void
-add_fix (width, exp, pc_rel)
+add_fix (width, exp, pc_rel, pc_fix)
char width;
struct m68k_exp *exp;
int pc_rel;
+ int pc_fix;
{
- the_ins.reloc[the_ins.nrel].n = (((width)=='B')
+ the_ins.reloc[the_ins.nrel].n = ((width == 'B' || width == '3')
? (the_ins.numo*2-1)
: (((width)=='b')
- ? ((the_ins.numo-1)*2)
+ ? (the_ins.numo*2+1)
: (the_ins.numo*2)));
- the_ins.reloc[the_ins.nrel].exp = exp->e_exp;
+ the_ins.reloc[the_ins.nrel].exp = exp->exp;
the_ins.reloc[the_ins.nrel].wid = width;
+ the_ins.reloc[the_ins.nrel].pcrel_fix = pc_fix;
+#ifdef OBJ_ELF
+ the_ins.reloc[the_ins.nrel].pic_reloc = exp->pic_reloc;
+#endif
the_ins.reloc[the_ins.nrel++].pcrel = pc_rel;
}
+/* Cause an extra frag to be generated here, inserting up to 10 bytes
+ (that value is chosen in the frag_var call in md_assemble). TYPE
+ is the subtype of the frag to be generated; its primary type is
+ rs_machine_dependent.
+
+ The TYPE parameter is also used by md_convert_frag_1 and
+ md_estimate_size_before_relax. The appropriate type of fixup will
+ be emitted by md_convert_frag_1.
+
+ ADD becomes the FR_SYMBOL field of the frag, and OFF the FR_OFFSET. */
static void
add_frag(add,off,type)
symbolS *add;
the_ins.fragb[the_ins.nfrag++].fragty=type;
}
-#define isvar(exp) \
- ((exp) && op (exp) != O_constant && op (exp) != O_big)
+#define isvar(ex) \
+ (op (ex) != O_constant && op (ex) != O_big)
static char *crack_operand PARAMS ((char *str, struct m68k_op *opP));
static int get_num PARAMS ((struct m68k_exp *exp, int ok));
-static int get_regs PARAMS ((int i, char *str, struct m68k_op *opP));
static int reverse_16_bits PARAMS ((int in));
static int reverse_8_bits PARAMS ((int in));
-static int try_index PARAMS ((char **s, struct m68k_op *opP));
static void install_gen_operand PARAMS ((int mode, int val));
static void install_operand PARAMS ((int mode, int val));
static void s_bss PARAMS ((int));
static void s_data2 PARAMS ((int));
static void s_even PARAMS ((int));
static void s_proc PARAMS ((int));
+static void mri_chip PARAMS ((void));
+static void s_chip PARAMS ((int));
+static void s_fopt PARAMS ((int));
+static void s_opt PARAMS ((int));
+static void s_reg PARAMS ((int));
+static void s_restore PARAMS ((int));
+static void s_save PARAMS ((int));
+static void s_mri_if PARAMS ((int));
+static void s_mri_else PARAMS ((int));
+static void s_mri_endi PARAMS ((int));
+static void s_mri_break PARAMS ((int));
+static void s_mri_next PARAMS ((int));
+static void s_mri_for PARAMS ((int));
+static void s_mri_endf PARAMS ((int));
+static void s_mri_repeat PARAMS ((int));
+static void s_mri_until PARAMS ((int));
+static void s_mri_while PARAMS ((int));
+static void s_mri_endw PARAMS ((int));
static int current_architecture;
+struct m68k_cpu {
+ unsigned long arch;
+ const char *name;
+ int alias;
+};
+
+static const struct m68k_cpu archs[] = {
+ { m68000, "68000", 0 },
+ { m68010, "68010", 0 },
+ { m68020, "68020", 0 },
+ { m68030, "68030", 0 },
+ { m68040, "68040", 0 },
+ { m68060, "68060", 0 },
+ { cpu32, "cpu32", 0 },
+ { m68881, "68881", 0 },
+ { m68851, "68851", 0 },
+ { mcf5200, "5200", 0 },
+ /* Aliases (effectively, so far as gas is concerned) for the above
+ cpus. */
+ { m68020, "68k", 1 },
+ { m68000, "68302", 1 },
+ { m68000, "68008", 1 },
+ { m68000, "68ec000", 1 },
+ { m68000, "68hc000", 1 },
+ { m68000, "68hc001", 1 },
+ { m68020, "68ec020", 1 },
+ { m68030, "68ec030", 1 },
+ { m68040, "68ec040", 1 },
+ { m68060, "68ec060", 1 },
+ { cpu32, "68330", 1 },
+ { cpu32, "68331", 1 },
+ { cpu32, "68332", 1 },
+ { cpu32, "68333", 1 },
+ { cpu32, "68340", 1 },
+ { cpu32, "68360", 1 },
+ { m68881, "68882", 1 },
+};
+
+static const int n_archs = sizeof (archs) / sizeof (archs[0]);
+
/* BCC68000 is for patching in an extra jmp instruction for long offsets
on the 68000. The 68000 doesn't support long branches with branchs */
How many bytes this mode will add to the size of the frag
Which mode to go to if the offset won't fit in this one
*/
-CONST relax_typeS md_relax_table[] =
+relax_typeS md_relax_table[] =
{
{1, 1, 0, 0}, /* First entries aren't used */
{1, 1, 0, 0}, /* For no good reason except */
{0, 0, 6, 0},
{1, 1, 0, 0},
+ /* For, e.g., jmp pcrel indexed. */
+ {125, -130, 0, TAB (PCINDEX, SHORT)},
+ {32765, -32770, 2, TAB (PCINDEX, LONG)},
+ {0, 0, 4, 0},
+ {1, 1, 0, 0},
};
/* These are the machine dependent pseudo-ops. These are included so
function to call to execute this pseudo-op
Integer arg to pass to the function
*/
-CONST pseudo_typeS md_pseudo_table[] =
+const pseudo_typeS md_pseudo_table[] =
{
{"data1", s_data1, 0},
{"data2", s_data2, 0},
{"even", s_even, 0},
{"skip", s_space, 0},
{"proc", s_proc, 0},
-#ifdef TE_SUN3
+#if defined (TE_SUN3) || defined (OBJ_ELF)
{"align", s_align_bytes, 0},
#endif
+#ifdef OBJ_ELF
+ {"swbeg", s_ignore, 0},
+#endif
+ {"extend", float_cons, 'x'},
+ {"ldouble", float_cons, 'x'},
+
+ /* The following pseudo-ops are supported for MRI compatibility. */
+ {"chip", s_chip, 0},
+ {"comline", s_space, 1},
+ {"fopt", s_fopt, 0},
+ {"mask2", s_ignore, 0},
+ {"opt", s_opt, 0},
+ {"reg", s_reg, 0},
+ {"restore", s_restore, 0},
+ {"save", s_save, 0},
+
+ {"if", s_mri_if, 0},
+ {"if.b", s_mri_if, 'b'},
+ {"if.w", s_mri_if, 'w'},
+ {"if.l", s_mri_if, 'l'},
+ {"else", s_mri_else, 0},
+ {"else.s", s_mri_else, 's'},
+ {"else.l", s_mri_else, 'l'},
+ {"endi", s_mri_endi, 0},
+ {"break", s_mri_break, 0},
+ {"break.s", s_mri_break, 's'},
+ {"break.l", s_mri_break, 'l'},
+ {"next", s_mri_next, 0},
+ {"next.s", s_mri_next, 's'},
+ {"next.l", s_mri_next, 'l'},
+ {"for", s_mri_for, 0},
+ {"for.b", s_mri_for, 'b'},
+ {"for.w", s_mri_for, 'w'},
+ {"for.l", s_mri_for, 'l'},
+ {"endf", s_mri_endf, 0},
+ {"repeat", s_mri_repeat, 0},
+ {"until", s_mri_until, 0},
+ {"until.b", s_mri_until, 'b'},
+ {"until.w", s_mri_until, 'w'},
+ {"until.l", s_mri_until, 'l'},
+ {"while", s_mri_while, 0},
+ {"while.b", s_mri_while, 'b'},
+ {"while.w", s_mri_while, 'w'},
+ {"while.l", s_mri_while, 'l'},
+ {"endw", s_mri_endw, 0},
+
{0, 0, 0}
};
CONST pseudo_typeS mote_pseudo_table[] =
{
- {"dc.l", cons, 4},
+ {"dcl", cons, 4},
{"dc", cons, 2},
- {"dc.w", cons, 2},
- {"dc.b", cons, 1},
+ {"dcw", cons, 2},
+ {"dcb", cons, 1},
- {"ds.l", s_space, 4},
+ {"dsl", s_space, 4},
{"ds", s_space, 2},
- {"ds.w", s_space, 2},
- {"ds.b", s_space, 1},
+ {"dsw", s_space, 2},
+ {"dsb", s_space, 1},
{"xdef", s_globl, 0},
+#ifdef OBJ_ELF
+ {"align", s_align_bytes, 0},
+#else
{"align", s_align_ptwo, 0},
+#endif
#ifdef M68KCOFF
{"sect", obj_coff_section, 0},
{"section", obj_coff_section, 0},
#define isuword(x) ((x)>=0 && (x)<=65535)
#define isbyte(x) ((x)>= -255 && (x)<=255)
-#define isword(x) ((x)>=-32768 && (x)<=65535)
+#define isword(x) ((x)>=-65536 && (x)<=65535)
#define islong(x) (1)
extern char *input_line_pointer;
-enum
- {
- FAIL = 0,
- OK = 1,
- };
-
-/* JF these tables here are for speed at the expense of size */
-/* You can replace them with the #if 0 versions if you really
- need space and don't mind it running a bit slower */
-
static char mklower_table[256];
#define mklower(c) (mklower_table[(unsigned char)(c)])
static char notend_table[256];
static char alt_notend_table[256];
-#define notend(s) ( !(notend_table[(unsigned char)(*s)] || (*s==':' &&\
- alt_notend_table[(unsigned char)(s[1])])))
-
-#if 0
-#define mklower(c) (isupper(c) ? tolower(c) : c)
-#endif
-
+#define notend(s) \
+ (! (notend_table[(unsigned char) *s] \
+ || (*s == ':' \
+ && alt_notend_table[(unsigned char) s[1]])))
-/* JF modified this to handle cases where the first part of a symbol name
- looks like a register */
+#if defined (M68KCOFF) && !defined (BFD_ASSEMBLER)
-/*
- * m68k_reg_parse() := if it looks like a register, return it's token &
- * advance the pointer.
- */
+#ifdef NO_PCREL_RELOCS
-enum _register
-m68k_reg_parse (ccp)
- register char **ccp;
+int
+make_pcrel_absolute(fixP, add_number)
+ fixS *fixP;
+ long *add_number;
{
- char *start = *ccp;
- char c;
- char *p;
- symbolS *symbolP;
+ register unsigned char *opcode = fixP->fx_frag->fr_opcode;
- if (flag_reg_prefix_optional)
+ /* rewrite the PC relative instructions to absolute address ones.
+ * these are rumoured to be faster, and the apollo linker refuses
+ * to deal with the PC relative relocations.
+ */
+ if (opcode[0] == 0x60 && opcode[1] == 0xff) /* BRA -> JMP */
{
- if (*start == REGISTER_PREFIX)
- start++;
- p = start;
+ opcode[0] = 0x4e;
+ opcode[1] = 0xf9;
}
- else
+ else if (opcode[0] == 0x61 && opcode[1] == 0xff) /* BSR -> JSR */
{
- if (*start != REGISTER_PREFIX)
- return FAIL;
- p = start + 1;
+ opcode[0] = 0x4e;
+ opcode[1] = 0xb9;
}
+ else
+ as_fatal ("Unknown PC relative instruction");
+ *add_number -= 4;
+ return 0;
+}
- if (!isalpha (*p) || !is_name_beginner (*p))
- return FAIL;
-
- c = *p++;
- while (isalpha (c) || isdigit (c) || c == '_')
- {
- c = *p++;
- }
+#endif /* NO_PCREL_RELOCS */
- *--p = 0;
- symbolP = symbol_find (start);
- *p = c;
+short
+tc_coff_fix2rtype (fixP)
+ fixS *fixP;
+{
+ if (fixP->fx_tcbit && fixP->fx_size == 4)
+ return R_RELLONG_NEG;
+#ifdef NO_PCREL_RELOCS
+ know (fixP->fx_pcrel == 0);
+ return (fixP->fx_size == 1 ? R_RELBYTE
+ : fixP->fx_size == 2 ? R_DIR16
+ : R_DIR32);
+#else
+ return (fixP->fx_pcrel ?
+ (fixP->fx_size == 1 ? R_PCRBYTE :
+ fixP->fx_size == 2 ? R_PCRWORD :
+ R_PCRLONG) :
+ (fixP->fx_size == 1 ? R_RELBYTE :
+ fixP->fx_size == 2 ? R_RELWORD :
+ R_RELLONG));
+#endif
+}
- if (symbolP && S_GET_SEGMENT (symbolP) == reg_section)
- {
- *ccp = p;
- return S_GET_VALUE (symbolP);
- }
+#endif
- return FAIL;
-}
+#ifdef OBJ_ELF
-#define SKIP_WHITE() { str++; if(*str==' ') str++;}
-#define SKIP_W() { ss++; if(*ss==' ') ss++;}
+/* Compute the relocation code for a fixup of SIZE bytes, using pc
+ relative relocation if PCREL is non-zero. PIC says whether a special
+ pic relocation was requested. */
-/* Parse an index specification using Motorola syntax. */
+static bfd_reloc_code_real_type get_reloc_code
+ PARAMS ((int, int, enum pic_relocation));
-static int
-try_moto_index (s, opP)
- char **s;
- struct m68k_op *opP;
+static bfd_reloc_code_real_type
+get_reloc_code (size, pcrel, pic)
+ int size;
+ int pcrel;
+ enum pic_relocation pic;
{
- register int i;
- char *ss;
-
- ss = *s;
- /* SKIP_W(); */
- if (*ss == ' ')
- ss++;
- i = m68k_reg_parse (&ss);
- if (!(i >= DATA + 0 && i <= ADDR + 7))
- { /* if i is not DATA or ADDR reg */
- opP->error = "Invalid index register";
- *s = ss;
- return FAIL;
- }
- opP->ireg = i;
- /* SKIP_W(); */
- if (*ss == ')')
- {
- opP->isiz = 0;
- opP->imul = 1;
- SKIP_W ();
- *s = ss;
- return OK;
- }
- if (*ss != '.')
- {
- opP->error = "Missing . in index register";
- *s = ss;
- return FAIL;
- }
- SKIP_W ();
- if (mklower (*ss) == 'w')
- opP->isiz = 2;
- else if (mklower (*ss) == 'l')
- opP->isiz = 3;
- else
- {
- opP->error = "Size spec not .W or .L";
- *s = ss;
- return FAIL;
- }
- SKIP_W ();
- if (*ss == '.' || *ss == '*')
+ switch (pic)
{
- SKIP_W ();
- switch (*ss)
+ case pic_got_pcrel:
+ switch (size)
{
- case '1':
- case '2':
- case '4':
- case '8':
- opP->imul = *ss - '0';
- break;
- default:
- opP->error = "index multiplier not 1, 2, 4 or 8";
- *s = ss;
- return FAIL;
+ case 1:
+ return BFD_RELOC_8_GOT_PCREL;
+ case 2:
+ return BFD_RELOC_16_GOT_PCREL;
+ case 4:
+ return BFD_RELOC_32_GOT_PCREL;
}
- SKIP_W ();
- }
- else
- opP->imul = 1;
- if (*ss != ')')
- {
- opP->error = "Missing )";
- *s = ss;
- return FAIL;
- }
- SKIP_W ();
- *s = ss;
- return OK;
-}
+ break;
-/*
- *
- * try_index := data_or_address_register + ')' + SKIP_W
- * | data_or_address_register + ':' + SKIP_W + size_spec + SKIP_W + multiplier + ')' + SKIP_W
- *
- * multiplier := <empty>
- * | ':' + multiplier_number
- * ;
- *
- * multiplier_number := '1' | '2' | '4' | '8' ;
- *
- * size_spec := 'l' | 'L' | 'w' | 'W' ;
- *
- * SKIP_W := <empty> | ' ' ;
- *
- */
+ case pic_got_off:
+ switch (size)
+ {
+ case 1:
+ return BFD_RELOC_8_GOTOFF;
+ case 2:
+ return BFD_RELOC_16_GOTOFF;
+ case 4:
+ return BFD_RELOC_32_GOTOFF;
+ }
+ break;
-static int
-try_index (s, opP)
- char **s;
- struct m68k_op *opP;
-{
- register int i;
- char *ss;
-
- ss = *s;
- /* SKIP_W(); */
- i = m68k_reg_parse (&ss);
- if (!(i >= DATA + 0 && i <= ADDR + 7))
- { /* if i is not DATA or ADDR reg */
- *s = ss;
- return FAIL;
- }
- opP->ireg = i;
- /* SKIP_W(); */
- if (*ss == ')')
- {
- opP->isiz = 0;
- opP->imul = 1;
- SKIP_W ();
- *s = ss;
- return OK;
- }
- if (*ss != ':')
- {
- opP->error = "Missing : in index register";
- *s = ss;
- return FAIL;
- }
- SKIP_W ();
- switch (*ss)
- {
- case 'w':
- case 'W':
- opP->isiz = 2;
+ case pic_plt_pcrel:
+ switch (size)
+ {
+ case 1:
+ return BFD_RELOC_8_PLT_PCREL;
+ case 2:
+ return BFD_RELOC_16_PLT_PCREL;
+ case 4:
+ return BFD_RELOC_32_PLT_PCREL;
+ }
break;
- case 'l':
- case 'L':
- opP->isiz = 3;
+
+ case pic_plt_off:
+ switch (size)
+ {
+ case 1:
+ return BFD_RELOC_8_PLTOFF;
+ case 2:
+ return BFD_RELOC_16_PLTOFF;
+ case 4:
+ return BFD_RELOC_32_PLTOFF;
+ }
break;
- default:
- opP->error = "Index register size spec not :w or :l";
- *s = ss;
- return FAIL;
- }
- SKIP_W ();
- if (*ss == ':')
- {
- SKIP_W ();
- switch (*ss)
+
+ case pic_none:
+ if (pcrel)
{
- case '1':
- case '2':
- case '4':
- case '8':
- if (cpu_of_arch (current_architecture) < m68020)
+ switch (size)
{
- opP->error = "no index scaling in pre-68020's";
- *s = ss;
- return FAIL;
+ case 1:
+ return BFD_RELOC_8_PCREL;
+ case 2:
+ return BFD_RELOC_16_PCREL;
+ case 4:
+ return BFD_RELOC_32_PCREL;
+ }
+ }
+ else
+ {
+ switch (size)
+ {
+ case 1:
+ return BFD_RELOC_8;
+ case 2:
+ return BFD_RELOC_16;
+ case 4:
+ return BFD_RELOC_32;
}
- opP->imul = *ss - '0';
- break;
- default:
- opP->error = "index multiplier not 1, 2, 4 or 8";
- *s = ss;
- return FAIL;
}
- SKIP_W ();
- }
- else
- opP->imul = 1;
- if (*ss != ')')
- {
- opP->error = "Missing )";
- *s = ss;
- return FAIL;
}
- SKIP_W ();
- *s = ss;
- return OK;
-} /* try_index() */
-
-/* Ian Taylor expanded this function to accept both MIT and Motorola
- syntax. I removed the old comment, since it was wrong. The syntax
- this accepted even before my changes was complex and undocumented.
- I mainly added a large case when the operand string does not
- contain an '@', since the Motorola syntax does not use the '@'
- character. */
+ as_bad ("Can not do %d byte %s%srelocation", size,
+ pcrel ? "pc-relative " : "",
+ pic == pic_none ? "" : "pic ");
+ return BFD_RELOC_NONE;
+}
+
+/* Here we decide which fixups can be adjusted to make them relative
+ to the beginning of the section instead of the symbol. Basically
+ we need to make sure that the dynamic relocations are done
+ correctly, so in some cases we force the original symbol to be
+ used. */
int
-m68k_ip_op (str, opP)
- char *str;
- register struct m68k_op *opP;
+tc_m68k_fix_adjustable (fixP)
+ fixS *fixP;
{
- char *strend;
- long i;
- char *parse_index ();
- int needp;
+ /* Prevent all adjustments to global symbols. */
+ if (S_IS_EXTERNAL (fixP->fx_addsy))
+ return 0;
- if (*str == ' ')
+ /* adjust_reloc_syms doesn't know about the GOT */
+ switch (fixP->fx_r_type)
{
- str++;
- } /* Find the beginning of the string */
+ case BFD_RELOC_8_GOT_PCREL:
+ case BFD_RELOC_16_GOT_PCREL:
+ case BFD_RELOC_32_GOT_PCREL:
+ case BFD_RELOC_8_GOTOFF:
+ case BFD_RELOC_16_GOTOFF:
+ case BFD_RELOC_32_GOTOFF:
+ case BFD_RELOC_8_PLT_PCREL:
+ case BFD_RELOC_16_PLT_PCREL:
+ case BFD_RELOC_32_PLT_PCREL:
+ case BFD_RELOC_8_PLTOFF:
+ case BFD_RELOC_16_PLTOFF:
+ case BFD_RELOC_32_PLTOFF:
+ return 0;
- if (!*str)
- {
- opP->error = "Missing operand";
- return FAIL;
- } /* Out of gas */
+ default:
+ return 1;
+ }
+}
- for (strend = str; *strend; strend++)
- ;
- --strend;
+#else /* !OBJ_ELF */
- if (*str == '#' || *str == '&')
- {
- str++;
- opP->con1 = add_exp (str, strend);
- opP->mode = IMMED;
- return OK;
- } /* Guess what: A constant. Shar and enjoy */
+#define get_reloc_code(SIZE,PCREL,OTHER) NO_RELOC
+
+#endif /* OBJ_ELF */
+
+#ifdef BFD_ASSEMBLER
+
+arelent *
+tc_gen_reloc (section, fixp)
+ asection *section;
+ fixS *fixp;
+{
+ arelent *reloc;
+ bfd_reloc_code_real_type code;
- i = m68k_reg_parse (&str);
+ if (fixp->fx_tcbit)
+ abort ();
- if (i != FAIL)
+ if (fixp->fx_r_type != BFD_RELOC_NONE)
{
- if (*str == '/' || *str == '-')
+ code = fixp->fx_r_type;
+
+ /* Since DIFF_EXPR_OK is defined in tc-m68k.h, it is possible
+ that fixup_segment converted a non-PC relative reloc into a
+ PC relative reloc. In such a case, we need to convert the
+ reloc code. */
+ if (fixp->fx_pcrel)
{
- /* "Rm-Rn/Ro-Rp" Register list for MOVEM instruction */
- opP->mode = REGLST;
- return get_regs (i, str, opP);
+ switch (code)
+ {
+ case BFD_RELOC_8:
+ code = BFD_RELOC_8_PCREL;
+ break;
+ case BFD_RELOC_16:
+ code = BFD_RELOC_16_PCREL;
+ break;
+ case BFD_RELOC_32:
+ code = BFD_RELOC_32_PCREL;
+ break;
+ case BFD_RELOC_8_PCREL:
+ case BFD_RELOC_16_PCREL:
+ case BFD_RELOC_32_PCREL:
+ case BFD_RELOC_8_GOT_PCREL:
+ case BFD_RELOC_16_GOT_PCREL:
+ case BFD_RELOC_32_GOT_PCREL:
+ case BFD_RELOC_8_GOTOFF:
+ case BFD_RELOC_16_GOTOFF:
+ case BFD_RELOC_32_GOTOFF:
+ case BFD_RELOC_8_PLT_PCREL:
+ case BFD_RELOC_16_PLT_PCREL:
+ case BFD_RELOC_32_PLT_PCREL:
+ case BFD_RELOC_8_PLTOFF:
+ case BFD_RELOC_16_PLTOFF:
+ case BFD_RELOC_32_PLTOFF:
+ break;
+ default:
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ "Cannot make %s relocation PC relative",
+ bfd_get_reloc_code_name (code));
+ }
}
- if (*str == '\0')
+ }
+ else
+ {
+#define F(SZ,PCREL) (((SZ) << 1) + (PCREL))
+ switch (F (fixp->fx_size, fixp->fx_pcrel))
{
- opP->reg = i;
- /* "Rn" Register Direct mode */
- if (i >= DATA + 0 && i <= DATA + 7)
- opP->mode = DREG;
- else if (i >= ADDR + 0 && i <= ADDR + 7)
- opP->mode = AREG;
- else
- opP->mode = MSCR;
- return OK;
+#define MAP(SZ,PCREL,TYPE) case F(SZ,PCREL): code = (TYPE); break
+ MAP (1, 0, BFD_RELOC_8);
+ MAP (2, 0, BFD_RELOC_16);
+ MAP (4, 0, BFD_RELOC_32);
+ MAP (1, 1, BFD_RELOC_8_PCREL);
+ MAP (2, 1, BFD_RELOC_16_PCREL);
+ MAP (4, 1, BFD_RELOC_32_PCREL);
+ default:
+ abort ();
}
}
+#undef F
+#undef MAP
- if (*str != '@')
- {
- char *stmp;
-
- if ((stmp = strchr (str, '@')) != 0)
- {
- opP->con1 = add_exp (str, stmp - 1);
- if (stmp == strend)
- {
- opP->mode = AINDX;
- return (OK);
- }
-
- if ((current_architecture & m68020up) == 0)
- {
- return (FAIL);
- } /* if target is not a '20 or better */
+ reloc = (arelent *) bfd_alloc_by_size_t (stdoutput, sizeof (arelent));
+ assert (reloc != 0);
+ reloc->sym_ptr_ptr = &fixp->fx_addsy->bsym;
+ reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
+#ifndef OBJ_ELF
+ if (fixp->fx_pcrel)
+ reloc->addend = fixp->fx_addnumber;
+ else
+ reloc->addend = 0;
+#else
+ if (!fixp->fx_pcrel)
+ reloc->addend = fixp->fx_addnumber;
+ else
+ reloc->addend = (section->vma
+ + (fixp->fx_pcrel_adjust == 64
+ ? -1 : fixp->fx_pcrel_adjust)
+ + fixp->fx_addnumber
+ + md_pcrel_from (fixp));
+#endif
- stmp++;
- if (*stmp++ != '(' || *strend-- != ')')
- {
- opP->error = "Malformed operand";
- return (FAIL);
- }
- i = try_index (&stmp, opP);
- opP->con2 = add_exp (stmp, strend);
+ reloc->howto = bfd_reloc_type_lookup (stdoutput, code);
+ assert (reloc->howto != 0);
- if (i == FAIL)
- {
- opP->mode = AMIND;
- }
- else
- {
- opP->mode = APODX;
- }
- return (OK);
- } /* if there's an '@' */
+ return reloc;
+}
-#ifndef MIT_SYNTAX_ONLY
- /* The operand has no '@'. Try to parse it using
- Motorola syntax. */
- /* Logic of the parsing switch(*str):
- case opP->mode =
- ---- -----------
- #anything IMMED 1
- REG AREG or DREG or MSCR 3 or 2 or 13
- REG- or REG/ REGLST 14
- (REG) AINDR 4
- (REG)+ AINC 6
- (REG,INDX) AINDX 8
- (EXPR,REG) AOFF 7
- (EXPR,REG,INDX) AINDX 8
- -(REG) ADEC 5
- EXP2(REG) AOFF 7
- EXP2(REG,INDX) AINDX 8
- EXP2 ABSL 12
-
- REG means truth(m68k_reg_parse(&str))
- INDX means truth(try_moto_index(&str,opP))
- EXPR means not REG
- EXP2 means not REG and not '(' and not '-('
- */
-
- if (*str == '(')
- {
- str++;
- i = m68k_reg_parse (&str);
- if ((i < ADDR + 0 || i > ADDR + 7)
- && (i < DATA + 0 || i > DATA + 7
- || *str != ')' || str[1] != '0')
- && i != PC && i != ZPC && i != FAIL)
- {
- /* Can't indirect off non address regs */
- opP->error = "Invalid indirect register";
- return FAIL;
- }
- if (i != FAIL)
- {
- opP->reg = i;
- if (*str == ')')
- {
- str++;
- if (*str == '\0')
- {
- /* "(An)" Address Register Indirect mode
- or "(Dn)" for cas2. */
- if (i >= DATA + 0 && i <= DATA + 7)
- opP->mode = DINDR;
- else
- opP->mode = AINDR;
- return OK;
- }
- if (*str == '+')
- {
- if (str[1] == '\0')
- {
- /* "(An)+" Register Indirect w Postincrement */
- opP->mode = AINC;
- return OK;
- }
- }
- opP->error = "Junk after indirect";
- return FAIL;
- }
- if (*str == ',')
- {
- str++;
- i = try_moto_index (&str, opP);
- if (i == FAIL)
- return FAIL;
- /* "(An,Rn)" Register Indirect with Index mode*/
- opP->mode = AINDX;
- return OK;
- }
- else
- {
- opP->error = "Bad indirect syntax";
- return FAIL;
- }
- }
- else
- {
- /* "(EXPR,..." , a displacement */
- char *stmp;
+#endif /* BFD_ASSEMBLER */
- if ((stmp = strchr (str, ',')) != NULL)
- {
- opP->con1 = add_exp (str, stmp - 1);
- str = stmp;
- SKIP_WHITE ();
- i = m68k_reg_parse (&str);
- if ((i < ADDR + 0 || i > ADDR + 7) && i != PC && i != ZPC)
- {
- /* Can't indirect off non address regs */
- opP->error = "Invalid indirect register";
- return FAIL;
- }
- if (i != FAIL)
- {
- opP->reg = i;
- if (*str == ')')
- {
- /* "(d,An)" Register Indirect w Displacement */
- opP->mode = AOFF;
- return OK;
- }
- if (*str == ',')
- {
- str++;
- i = try_moto_index (&str, opP);
- if (i == FAIL)
- return FAIL;
- /* "(d,An,Rn)" Register Indirect with Index */
- opP->mode = AINDX;
- return OK;
- }
- else
- {
- opP->error = "Bad indirect syntax";
- return FAIL;
- }
- }
- else
- {
- opP->error = "Invalid register";
- return FAIL;
- }
- }
- else
- {
- opP->mode = ABSL;
- opP->con1 = add_exp (str - 1, strend);
- return OK;
- }
- }
- }
+/* Handle of the OPCODE hash table. NULL means any use before
+ m68k_ip_begin() will crash. */
+static struct hash_control *op_hash;
+\f
+/* Assemble an m68k instruction. */
- if (*str == '-')
- {
- if (str[1] == '(')
- {
- str = str + 2;
- i = m68k_reg_parse (&str);
- if ((i < ADDR + 0 || i > ADDR + 7) && i != PC && i != ZPC && i != FAIL)
- {
- /* Can't indirect off non address regs */
- opP->error = "Invalid indirect register";
- return FAIL;
- }
- if (i != FAIL)
- {
- opP->reg = i;
- if (*str == ')')
- {
- str++;
- if (*str == '\0')
- {
- /* "-(An)" Register Indirect with Predecrement */
- opP->mode = ADEC;
- return OK;
- }
- opP->error = "Junk after indirect";
- return FAIL;
- }
- opP->error = "Bad indirect syntax";
- return FAIL;
- }
- opP->mode = ABSL;
- opP->con1 = add_exp (str - 2, strend);
- return OK;
- }
- /* if '-' but not "-(', do nothing */
- }
+void
+m68k_ip (instring)
+ char *instring;
+{
+ register char *p;
+ register struct m68k_op *opP;
+ register struct m68k_incant *opcode;
+ register const char *s;
+ register int tmpreg = 0, baseo = 0, outro = 0, nextword;
+ char *pdot, *pdotmove;
+ enum m68k_size siz1, siz2;
+ char c;
+ int losing;
+ int opsfound;
+ char *crack_operand ();
+ LITTLENUM_TYPE words[6];
+ LITTLENUM_TYPE *wordp;
+ unsigned long ok_arch = 0;
- /* whether *str=='-' or not */
- {
- /* "EXP2" or "EXP2(REG..." */
- char *stmp;
- if ((stmp = strchr (str, '(')) != NULL)
- {
- char *ostr = str;
+ if (*instring == ' ')
+ instring++; /* skip leading whitespace */
- opP->con1 = add_exp (str, stmp - 1);
- str = stmp + 1;
- i = m68k_reg_parse (&str);
- if ((i < ADDR + 0 || i > ADDR + 7) && i != PC
- && i != ZPC && i != FAIL)
- {
- /* Can't indirect off non address regs */
- opP->error = "Invalid indirect register";
- return FAIL;
- }
- if (i != FAIL)
- {
- opP->reg = i;
- if (*str == ')')
- {
- /* "d(An)" Register Indirect w Displacement */
- opP->mode = AOFF;
- return OK;
- }
- if (*str == ',')
- {
- str++;
- i = try_moto_index (&str, opP);
- if (i == FAIL)
- return FAIL;
- /* "d(An,Rn)" Register Indirect with Index */
- opP->mode = AINDX;
- return OK;
- }
- else
- {
- opP->error = "Bad indirect syntax";
- return FAIL;
- }
- }
- else
- {
- opP->mode = ABSL;
- opP->con1 = add_exp (ostr, strend);
- return OK;
- }
- }
- else
- {
- /* "EXP2" Absolute */
- opP->mode = ABSL;
- opP->isiz = 0;
- if (strend[-1] == '.' || strend[-1] == ':')
- {
- /* mode ==foo.[wl] */
- switch (*strend)
- {
- case 'w':
- case 'W':
- opP->isiz = 2;
- break;
- case 'l':
- case 'L':
- opP->isiz = 3;
- break;
- }
- }
- opP->con1 = add_exp (str, strend);
- return OK;
- }
- }
- /*NOTREACHED*/
-#else /* defined (MIT_SYNTAX_ONLY) */
- opP->mode = ABSL;
- opP->con1 = add_exp (str, strend);
- return OK;
-#endif /* defined (MIT_SYNTAX_ONLY) */
+ /* Scan up to end of operation-code, which MUST end in end-of-string
+ or exactly 1 space. */
+ pdot = 0;
+ for (p = instring; *p != '\0'; p++)
+ {
+ if (*p == ' ')
+ break;
+ if (*p == '.')
+ pdot = p;
}
- opP->reg = i;
-
- /* Can't indirect off non address regs, but Dx@ is OK for cas2 */
- if ((i < ADDR + 0 || i > ADDR + 7) && i != PC && i != ZPC && i != FAIL
- && (str[1] != '\0' || i < DATA + 0 || i > DATA + 7))
+ if (p == instring)
{
- opP->error = "Invalid indirect register";
- return FAIL;
+ the_ins.error = "No operator";
+ return;
}
- know (*str == '@');
- str++;
- switch (*str)
+ /* p now points to the end of the opcode name, probably whitespace.
+ Make sure the name is null terminated by clobbering the
+ whitespace, look it up in the hash table, then fix it back.
+ Remove a dot, first, since the opcode tables have none. */
+ if (pdot != NULL)
{
- case '\0':
- if (i < DATA + 0 || i > DATA + 7)
- opP->mode = AINDR;
- else
- opP->mode = DINDR;
- return OK;
- case '-':
- opP->mode = ADEC;
- return OK;
- case '+':
- opP->mode = AINC;
- return OK;
- case '(':
- str++;
- break;
- default:
- opP->error = "Junk after indirect";
- return FAIL;
+ for (pdotmove = pdot; pdotmove < p; pdotmove++)
+ *pdotmove = pdotmove[1];
+ p--;
}
- /* Some kind of indexing involved. Lets find out how bad it is */
- i = try_index (&str, opP);
- /* Didn't start with an index reg, maybe its offset or offset,reg */
- if (i == FAIL)
- {
- char *beg_str;
-
- beg_str = str;
- for (i = 1; i;)
- {
- switch (*str++)
- {
- case '\0':
- opP->error = "Missing )";
- return FAIL;
- case ',':
- i = 0;
- break;
- case '(':
- i++;
- break;
- case ')':
- --i;
- break;
- }
- }
-#if 0
- if (str[-3]==':')
- {
- int siz;
- switch (str[-2])
- {
- case 'b':
- case 'B':
- siz=1;
- break;
- case 'w':
- case 'W':
- siz=2;
- break;
- case 'l':
- case 'L':
- siz=3;
- break;
- default:
- opP->error="Specified size isn't :w or :l";
- return FAIL;
- }
- opP->con1=add_exp(beg_str,str-4);
- opP->con1->e_siz=siz;
- }
- else
-#endif
- opP->con1 = add_exp (beg_str, str - 2);
- /* Should be offset,reg */
- if (str[-1] == ',')
- {
- i = try_index (&str, opP);
- if (i == FAIL)
- {
- opP->error = "Malformed index reg";
- return FAIL;
- }
- }
- }
- /* We've now got offset) offset,reg) or reg) */
+ c = *p;
+ *p = '\0';
+ opcode = (struct m68k_incant *) hash_find (op_hash, instring);
+ *p = c;
- if (*str == '\0')
- {
- /* Th-the-thats all folks */
- if (opP->reg == FAIL)
- opP->mode = AINDX; /* Other form of indirect */
- else if (opP->ireg == FAIL)
- opP->mode = AOFF;
- else
- opP->mode = AINDX;
- return (OK);
- }
- /* Next thing had better be another @ */
- if (*str == '@')
+ if (pdot != NULL)
{
- if (str[1] == '(')
- {
- needp = 1;
- str += 2;
- }
- else
- {
- needp = 0;
- str++;
- }
+ for (pdotmove = p; pdotmove > pdot; pdotmove--)
+ *pdotmove = pdotmove[-1];
+ *pdot = '.';
+ ++p;
}
- if ((current_architecture & m68020up) == 0)
+ if (opcode == NULL)
{
- return (FAIL);
- } /* if target is not a '20 or better */
+ the_ins.error = "Unknown operator";
+ return;
+ }
+ /* found a legitimate opcode, start matching operands */
+ while (*p == ' ')
+ ++p;
- if (opP->ireg != FAIL)
+ if (opcode->m_operands == 0)
{
- opP->mode = APRDX;
+ char *old = input_line_pointer;
+ *old = '\n';
+ input_line_pointer = p;
+ /* Ahh - it's a motorola style psuedo op */
+ mote_pseudo_table[opcode->m_opnum].poc_handler
+ (mote_pseudo_table[opcode->m_opnum].poc_val);
+ input_line_pointer = old;
+ *old = 0;
- i = try_index (&str, opP);
- if (i != FAIL)
- {
- opP->error = "Two index registers! not allowed!";
- return (FAIL);
- }
+ return;
}
- else
+
+ if (flag_mri && opcode->m_opnum == 0)
{
- i = try_index (&str, opP);
+ /* In MRI mode, random garbage is allowed after an instruction
+ which accepts no operands. */
+ the_ins.args = opcode->m_operands;
+ the_ins.numargs = opcode->m_opnum;
+ the_ins.numo = opcode->m_codenum;
+ the_ins.opcode[0] = getone (opcode);
+ the_ins.opcode[1] = gettwo (opcode);
+ return;
}
- if (i == FAIL)
+ for (opP = &the_ins.operands[0]; *p; opP++)
{
- char *beg_str;
-
- beg_str = str;
+ p = crack_operand (p, opP);
- for (i = 1; i;)
+ if (opP->error)
{
- switch (*str++)
- {
- case '\0':
- if (needp)
- opP->error = "Missing )";
- return (FAIL);
- break;
- case ',':
- i = 0;
- break;
- case '(':
- i++;
- break;
- case ')':
- --i;
- break;
- }
+ the_ins.error = opP->error;
+ return;
}
+ }
- opP->con2 = add_exp (beg_str, str - 2);
-
- if (str[-1] == ',')
- {
- if (opP->ireg != FAIL)
- {
- opP->error = "Can't have two index regs";
- return (FAIL);
- }
+ opsfound = opP - &the_ins.operands[0];
- i = try_index (&str, opP);
+ /* This ugly hack is to support the floating pt opcodes in their
+ standard form. Essentially, we fake a first enty of type COP#1 */
+ if (opcode->m_operands[0] == 'I')
+ {
+ int n;
- if (i == FAIL)
- {
- opP->error = "malformed index reg";
- return (FAIL);
- }
+ for (n = opsfound; n > 0; --n)
+ the_ins.operands[n] = the_ins.operands[n - 1];
- opP->mode = APODX;
- }
- else if (opP->ireg != FAIL)
- {
- opP->mode = APRDX;
- }
- else
- {
- opP->mode = AMIND;
- }
- }
- else
- {
- opP->mode = APODX;
- }
-
- if (*str != '\0')
- {
- opP->error = "Junk after indirect";
- return FAIL;
- }
- return (OK);
-} /* m68k_ip_op() */
-
-
-#if defined (M68KCOFF) && !defined (BFD_ASSEMBLER)
-
-#ifdef NO_PCREL_RELOCS
-
-int
-make_pcrel_absolute(fixP, add_number)
- fixS *fixP;
- long *add_number;
-{
- register unsigned char *opcode = fixP->fx_frag->fr_opcode;
-
- /* rewrite the PC relative instructions to absolute address ones.
- * these are rumoured to be faster, and the apollo linker refuses
- * to deal with the PC relative relocations.
- */
- if (opcode[0] == 0x60 && opcode[1] == 0xff) /* BRA -> JMP */
- {
- opcode[0] = 0x4e;
- opcode[1] = 0xf9;
- }
- else if (opcode[0] == 0x61 && opcode[1] == 0xff) /* BSR -> JSR */
- {
- opcode[0] = 0x4e;
- opcode[1] = 0xb9;
- }
- else
- as_fatal ("Unknown PC relative instruction");
- *add_number -= 4;
- return 0;
-}
-
-#endif /* NO_PCREL_RELOCS */
-
-short
-tc_coff_fix2rtype (fixP)
- fixS *fixP;
-{
-#ifdef NO_PCREL_RELOCS
- know (fixP->fx_pcrel == 0);
- return (fixP->fx_size == 1 ? R_RELBYTE
- : fixP->fx_size == 2 ? R_DIR16
- : R_DIR32);
-#else
- return (fixP->fx_pcrel ?
- (fixP->fx_size == 1 ? R_PCRBYTE :
- fixP->fx_size == 2 ? R_PCRWORD :
- R_PCRLONG) :
- (fixP->fx_size == 1 ? R_RELBYTE :
- fixP->fx_size == 2 ? R_RELWORD :
- R_RELLONG));
-#endif
-}
-
-#endif
-
-#ifdef BFD_ASSEMBLER
-
-arelent *
-tc_gen_reloc (section, fixp)
- asection *section;
- fixS *fixp;
-{
- arelent *reloc;
- bfd_reloc_code_real_type code;
-
-#define F(SZ,PCREL) (((SZ) << 1) + (PCREL))
- switch (F (fixp->fx_size, fixp->fx_pcrel))
- {
-#define MAP(SZ,PCREL,TYPE) case F(SZ,PCREL): code = (TYPE); break
- MAP (1, 0, BFD_RELOC_8);
- MAP (2, 0, BFD_RELOC_16);
- MAP (4, 0, BFD_RELOC_32);
- MAP (1, 1, BFD_RELOC_8_PCREL);
- MAP (2, 1, BFD_RELOC_16_PCREL);
- MAP (4, 1, BFD_RELOC_32_PCREL);
- default:
- abort ();
- }
-
- reloc = (arelent *) bfd_alloc_by_size_t (stdoutput, sizeof (arelent));
- assert (reloc != 0);
- reloc->sym_ptr_ptr = &fixp->fx_addsy->bsym;
- reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
- if (fixp->fx_pcrel)
- reloc->addend = fixp->fx_addnumber;
- else
- reloc->addend = 0;
-
- reloc->howto = bfd_reloc_type_lookup (stdoutput, code);
- assert (reloc->howto != 0);
-
- return reloc;
-}
-
-#endif /* BFD_ASSEMBLER */
-
-#ifdef TEST1 /* TEST1 tests m68k_ip_op(), which parses operands */
-main ()
-{
- char buf[128];
- struct m68k_op thark;
-
- for (;;)
- {
- if (!gets (buf))
- break;
- memset (&thark, '\0', sizeof (thark));
- if (!m68k_ip_op (buf, &thark))
- printf ("FAIL:");
- if (thark.error)
- printf ("op1 error %s in %s\n", thark.error, buf);
- printf ("mode %d, reg %d, ", thark.mode, thark.reg);
- if (thark.b_const)
- printf ("Constant: '%.*s',", 1 + thark.e_const - thark.b_const, thark.b_const);
- printf ("ireg %d, isiz %d, imul %d ", thark.ireg, thark.isiz, thark.imul);
- if (thark.b_iadd)
- printf ("Iadd: '%.*s'", 1 + thark.e_iadd - thark.b_iadd, thark.b_iadd);
- printf ("\n");
- }
- exit (EXIT_SUCCESS);
-}
-
-#endif
-
-
-/* Handle of the OPCODE hash table. NULL means any use before
- m68k_ip_begin() will crash. */
-static struct hash_control *op_hash;
-\f
-
-/*
- * m 6 8 k _ i p ( )
- *
- * This converts a string into a 68k instruction.
- * The string must be a bare single instruction in sun format
- * with RMS-style 68020 indirects
- * (example: )
- *
- * It provides some error messages: at most one fatal error message (which
- * stops the scan) and at most one warning message for each operand.
- * The 68k instruction is returned in exploded form, since we have no
- * knowledge of how you parse (or evaluate) your expressions.
- * We do however strip off and decode addressing modes and operation
- * mnemonic.
- *
- * This function's value is a string. If it is not "" then an internal
- * logic error was found: read this code to assign meaning to the string.
- * No argument string should generate such an error string:
- * it means a bug in our code, not in the user's text.
- *
- * You MUST have called m68k_ip_begin() once and m86_ip_end() never before using
- * this function.
- */
-
-/* JF this function no longer returns a useful value. Sorry */
-void
-m68k_ip (instring)
- char *instring;
-{
- register char *p;
- register struct m68k_op *opP;
- register struct m68k_incant *opcode;
- register char *s;
- register int tmpreg = 0, baseo = 0, outro = 0, nextword;
- char *pdot, *pdotmove;
- int siz1, siz2;
- char c;
- int losing;
- int opsfound;
- char *crack_operand ();
- LITTLENUM_TYPE words[6];
- LITTLENUM_TYPE *wordp;
- unsigned long ok_arch = 0;
-
- if (*instring == ' ')
- instring++; /* skip leading whitespace */
-
- /* Scan up to end of operation-code, which MUST end in end-of-string
- or exactly 1 space. */
- pdot = 0;
- for (p = instring; *p != '\0'; p++)
- {
- if (*p == ' ')
- break;
- if (*p == '.')
- pdot = p;
- }
-
- if (p == instring)
- {
- the_ins.error = "No operator";
- the_ins.opcode[0] = 0;
- /* the_ins.numo=1; */
- return;
- }
-
- /* p now points to the end of the opcode name, probably whitespace.
- make sure the name is null terminated by clobbering the whitespace,
- look it up in the hash table, then fix it back.
- Remove a dot, first, since the opcode tables have none. */
- if (pdot != NULL)
- {
- for (pdotmove = pdot; pdotmove < p; pdotmove++)
- *pdotmove = pdotmove[1];
- p--;
- }
-
- c = *p;
- *p = '\0';
- opcode = (struct m68k_incant *) hash_find (op_hash, instring);
- *p = c;
-
- if (pdot != NULL)
- {
- for (pdotmove = p; pdotmove > pdot; pdotmove--)
- *pdotmove = pdotmove[-1];
- *pdot = '.';
- ++p;
- }
-
- if (opcode == NULL)
- {
- the_ins.error = "Unknown operator";
- the_ins.opcode[0] = 0;
- /* the_ins.numo=1; */
- return;
- }
-
- /* found a legitimate opcode, start matching operands */
- while (*p == ' ')
- ++p;
-
-
- if (opcode->m_operands == 0)
- {
- char *old = input_line_pointer;
- *old = '\n';
- input_line_pointer = p;
- /* Ahh - it's a motorola style psuedo op */
- mote_pseudo_table[opcode->m_opnum].poc_handler
- (mote_pseudo_table[opcode->m_opnum].poc_val);
- input_line_pointer = old;
- *old = 0;
-
- return;
- }
-
- for (opP = &the_ins.operands[0]; *p; opP++)
- {
-
- p = crack_operand (p, opP);
-
- if (opP->error)
- {
- the_ins.error = opP->error;
- return;
- }
- }
-
- opsfound = opP - &the_ins.operands[0];
-
- /* This ugly hack is to support the floating pt opcodes in their standard form */
- /* Essentially, we fake a first enty of type COP#1 */
- if (opcode->m_operands[0] == 'I')
- {
- int n;
-
- for (n = opsfound; n > 0; --n)
- the_ins.operands[n] = the_ins.operands[n - 1];
-
- memset ((char *) (&the_ins.operands[0]), '\0', sizeof (the_ins.operands[0]));
- the_ins.operands[0].mode = MSCR;
- the_ins.operands[0].reg = COPNUM; /* COP #1 */
- opsfound++;
+ memset ((char *) (&the_ins.operands[0]), '\0',
+ sizeof (the_ins.operands[0]));
+ the_ins.operands[0].mode = CONTROL;
+ the_ins.operands[0].reg = m68k_float_copnum;
+ opsfound++;
}
/* We've got the operands. Find an opcode that'll accept them */
/* If we didn't get the right number of ops, or we have no
common model with this pattern then reject this pattern. */
+ ok_arch |= opcode->m_arch;
if (opsfound != opcode->m_opnum
|| ((opcode->m_arch & current_architecture) == 0))
- {
- ++losing;
- ok_arch |= opcode->m_arch;
- }
+ ++losing;
else
{
- for (s = opcode->m_operands, opP = &the_ins.operands[0]; *s && !losing; s += 2, opP++)
+ for (s = opcode->m_operands, opP = &the_ins.operands[0];
+ *s && !losing;
+ s += 2, opP++)
{
/* Warning: this switch is huge! */
/* I've tried to organize the cases into this order:
switch (*s)
{
case '!':
- if (opP->mode == MSCR || opP->mode == IMMED
- || opP->mode == DREG || opP->mode == AREG
- || opP->mode == AINC || opP->mode == ADEC
- || opP->mode == REGLST)
- losing++;
+ switch (opP->mode)
+ {
+ case IMMED:
+ case DREG:
+ case AREG:
+ case FPREG:
+ case CONTROL:
+ case AINC:
+ case ADEC:
+ case REGLST:
+ losing++;
+ break;
+ default:
+ break;
+ }
break;
case '`':
switch (opP->mode)
{
- case MSCR:
case IMMED:
case DREG:
case AREG:
+ case FPREG:
+ case CONTROL:
case AINC:
case REGLST:
case AINDR:
}
break;
- case '#':
- if (opP->mode != IMMED)
- losing++;
- else
+ case '<':
+ switch (opP->mode)
{
- long t;
+ case DREG:
+ case AREG:
+ case FPREG:
+ case CONTROL:
+ case IMMED:
+ case ADEC:
+ case REGLST:
+ losing++;
+ break;
+ default:
+ break;
+ }
+ break;
- t = get_num (opP->con1, 80);
- if (s[1] == 'b' && !isbyte (t))
- losing++;
- else if (s[1] == 'w' && !isword (t))
+ case '>':
+ switch (opP->mode)
+ {
+ case DREG:
+ case AREG:
+ case FPREG:
+ case CONTROL:
+ case IMMED:
+ case AINC:
+ case REGLST:
+ losing++;
+ break;
+ case ABSL:
+ break;
+ default:
+ if (opP->reg == PC
+ || opP->reg == ZPC)
losing++;
+ break;
+ }
+ break;
+
+ case 'm':
+ switch (opP->mode)
+ {
+ case DREG:
+ case AREG:
+ case AINDR:
+ case AINC:
+ case ADEC:
+ break;
+ default:
+ losing++;
+ }
+ break;
+
+ case 'n':
+ switch (opP->mode)
+ {
+ case DISP:
+ break;
+ default:
+ losing++;
}
+ break;
+
+ case 'o':
+ switch (opP->mode)
+ {
+ case BASE:
+ case ABSL:
+ case IMMED:
+ break;
+ default:
+ losing++;
+ }
+ break;
+
+ case 'p':
+ switch (opP->mode)
+ {
+ case DREG:
+ case AREG:
+ case AINDR:
+ case AINC:
+ case ADEC:
+ case DISP:
+ break;
+ default:
+ losing++;
+ }
+ break;
+
+ case '#':
+ if (opP->mode != IMMED)
+ losing++;
+ else if (s[1] == 'b'
+ && ! isvar (&opP->disp)
+ && (opP->disp.exp.X_op != O_constant
+ || ! isbyte (opP->disp.exp.X_add_number)))
+ losing++;
+ else if (s[1] == 'B'
+ && ! isvar (&opP->disp)
+ && (opP->disp.exp.X_op != O_constant
+ || ! issbyte (opP->disp.exp.X_add_number)))
+ losing++;
+ else if (s[1] == 'w'
+ && ! isvar (&opP->disp)
+ && (opP->disp.exp.X_op != O_constant
+ || ! isword (opP->disp.exp.X_add_number)))
+ losing++;
+ else if (s[1] == 'W'
+ && ! isvar (&opP->disp)
+ && (opP->disp.exp.X_op != O_constant
+ || ! issword (opP->disp.exp.X_add_number)))
+ losing++;
break;
case '^':
break;
case '$':
- if (opP->mode == MSCR || opP->mode == AREG ||
- opP->mode == IMMED || opP->reg == PC || opP->reg == ZPC || opP->mode == REGLST)
+ if (opP->mode == AREG
+ || opP->mode == CONTROL
+ || opP->mode == FPREG
+ || opP->mode == IMMED
+ || opP->mode == REGLST
+ || (opP->mode != ABSL
+ && (opP->reg == PC
+ || opP->reg == ZPC)))
losing++;
break;
case '%':
- if (opP->mode == MSCR || opP->reg == PC ||
- opP->reg == ZPC || opP->mode == REGLST)
+ if (opP->mode == CONTROL
+ || opP->mode == FPREG
+ || opP->mode == REGLST
+ || opP->mode == IMMED
+ || (opP->mode != ABSL
+ && (opP->reg == PC
+ || opP->reg == ZPC)))
losing++;
break;
-
case '&':
- if (opP->mode == MSCR || opP->mode == DREG ||
- opP->mode == AREG || opP->mode == IMMED || opP->reg == PC || opP->reg == ZPC ||
- opP->mode == AINC || opP->mode == ADEC || opP->mode == REGLST)
- losing++;
+ switch (opP->mode)
+ {
+ case DREG:
+ case AREG:
+ case FPREG:
+ case CONTROL:
+ case IMMED:
+ case AINC:
+ case ADEC:
+ case REGLST:
+ losing++;
+ break;
+ case ABSL:
+ break;
+ default:
+ if (opP->reg == PC
+ || opP->reg == ZPC)
+ losing++;
+ break;
+ }
break;
case '*':
- if (opP->mode == MSCR || opP->mode == REGLST)
+ if (opP->mode == CONTROL
+ || opP->mode == FPREG
+ || opP->mode == REGLST)
losing++;
break;
break;
case '/':
- if (opP->mode == MSCR || opP->mode == AREG ||
- opP->mode == AINC || opP->mode == ADEC || opP->mode == IMMED || opP->mode == REGLST)
- losing++;
+ switch (opP->mode)
+ {
+ case AREG:
+ case CONTROL:
+ case FPREG:
+ case AINC:
+ case ADEC:
+ case IMMED:
+ case REGLST:
+ losing++;
+ break;
+ default:
+ break;
+ }
break;
case ';':
- if (opP->mode == MSCR || opP->mode == AREG || opP->mode == REGLST)
- losing++;
+ switch (opP->mode)
+ {
+ case AREG:
+ case CONTROL:
+ case FPREG:
+ case REGLST:
+ losing++;
+ break;
+ default:
+ break;
+ }
break;
case '?':
- if (opP->mode == MSCR || opP->mode == AREG ||
- opP->mode == AINC || opP->mode == ADEC || opP->mode == IMMED || opP->reg == PC ||
- opP->reg == ZPC || opP->mode == REGLST)
- losing++;
+ switch (opP->mode)
+ {
+ case AREG:
+ case CONTROL:
+ case FPREG:
+ case AINC:
+ case ADEC:
+ case IMMED:
+ case REGLST:
+ losing++;
+ break;
+ case ABSL:
+ break;
+ default:
+ if (opP->reg == PC || opP->reg == ZPC)
+ losing++;
+ break;
+ }
break;
case '@':
- if (opP->mode == MSCR || opP->mode == AREG ||
- opP->mode == IMMED || opP->mode == REGLST)
- losing++;
+ switch (opP->mode)
+ {
+ case AREG:
+ case CONTROL:
+ case FPREG:
+ case IMMED:
+ case REGLST:
+ losing++;
+ break;
+ default:
+ break;
+ }
break;
case '~': /* For now! (JF FOO is this right?) */
- if (opP->mode == MSCR || opP->mode == DREG ||
- opP->mode == AREG || opP->mode == IMMED || opP->reg == PC || opP->reg == ZPC || opP->mode == REGLST)
- losing++;
+ switch (opP->mode)
+ {
+ case DREG:
+ case AREG:
+ case CONTROL:
+ case FPREG:
+ case IMMED:
+ case REGLST:
+ losing++;
+ break;
+ case ABSL:
+ break;
+ default:
+ if (opP->reg == PC
+ || opP->reg == ZPC)
+ losing++;
+ break;
+ }
break;
case '3':
- if (opP->mode != MSCR || (opP->reg != TT0 && opP->reg != TT1))
+ if (opP->mode != CONTROL
+ || (opP->reg != TT0 && opP->reg != TT1))
losing++;
break;
if (opP->mode != AREG)
losing++;
break;
+
case 'a':
if (opP->mode != AINDR)
- {
- ++losing;
- } /* if not address register indirect */
+ ++losing;
break;
+
case 'B': /* FOO */
- if (opP->mode != ABSL || (flag_long_jumps && instring[0] == 'j'
- && instring[1] == 'b'
- && instring[2] == 's'
- && instring[3] == 'r'))
+ if (opP->mode != ABSL
+ || (flag_long_jumps
+ && strncmp (instring, "jbsr", 4) == 0))
losing++;
break;
case 'C':
- if (opP->mode != MSCR || opP->reg != CCR)
+ if (opP->mode != CONTROL || opP->reg != CCR)
losing++;
break;
- case 'd': /* FOO This mode is a KLUDGE!! */
- if (opP->mode != AOFF && (opP->mode != ABSL ||
- opP->con1->e_beg[0] != '(' || opP->con1->e_end[0] != ')'))
+ case 'd':
+ if (opP->mode != DISP
+ || opP->reg < ADDR0
+ || opP->reg > ADDR7)
losing++;
break;
break;
case 'F':
- if (opP->mode != MSCR || opP->reg < (FPREG + 0) || opP->reg > (FPREG + 7))
+ if (opP->mode != FPREG)
losing++;
break;
case 'I':
- if (opP->mode != MSCR || opP->reg < COPNUM ||
- opP->reg >= COPNUM + 7)
+ if (opP->mode != CONTROL
+ || opP->reg < COP0
+ || opP->reg > COP7)
losing++;
break;
case 'J':
- if (opP->mode != MSCR
+ if (opP->mode != CONTROL
|| opP->reg < USP
|| opP->reg > last_movec_reg)
losing++;
else
{
- const enum _register *rp;
+ const enum m68k_register *rp;
for (rp = control_regs; *rp; rp++)
if (*rp == opP->reg)
break;
case 'l':
case 'L':
- if (opP->mode == DREG || opP->mode == AREG || opP->mode == FPREG)
+ if (opP->mode == DREG
+ || opP->mode == AREG
+ || opP->mode == FPREG)
{
if (s[1] == '8')
losing++;
else
{
+ switch (opP->mode)
+ {
+ case DREG:
+ opP->mask = 1 << (opP->reg - DATA0);
+ break;
+ case AREG:
+ opP->mask = 1 << (opP->reg - ADDR0 + 8);
+ break;
+ case FPREG:
+ opP->mask = 1 << (opP->reg - FP0 + 16);
+ break;
+ default:
+ abort ();
+ }
opP->mode = REGLST;
- opP->reg = 1 << (opP->reg - DATA);
}
}
- else if (opP->mode != REGLST)
+ else if (opP->mode == CONTROL)
{
- losing++;
+ if (s[1] != '8')
+ losing++;
+ else
+ {
+ switch (opP->reg)
+ {
+ case FPI:
+ opP->mask = 1 << 24;
+ break;
+ case FPS:
+ opP->mask = 1 << 25;
+ break;
+ case FPC:
+ opP->mask = 1 << 26;
+ break;
+ default:
+ losing++;
+ break;
+ }
+ opP->mode = REGLST;
+ }
}
- else if (s[1] == '8' && opP->reg & 0x0FFffFF)
+ else if (opP->mode == ABSL
+ && opP->disp.size == SIZE_UNSPEC
+ && opP->disp.exp.X_op == O_constant)
+ {
+ /* This is what the MRI REG pseudo-op generates. */
+ opP->mode = REGLST;
+ opP->mask = opP->disp.exp.X_add_number;
+ }
+ else if (opP->mode != REGLST)
+ losing++;
+ else if (s[1] == '8' && (opP->mask & 0x0ffffff) != 0)
losing++;
- else if (s[1] == '3' && opP->reg & 0x7000000)
+ else if (s[1] == '3' && (opP->mask & 0x7000000) != 0)
losing++;
break;
case 'M':
if (opP->mode != IMMED)
losing++;
- else
- {
- long t;
-
- t = get_num (opP->con1, 0);
- if (!issbyte (t)
- || isvar (opP->con1))
- losing++;
- }
+ else if (opP->disp.exp.X_op != O_constant
+ || ! issbyte (opP->disp.exp.X_add_number))
+ losing++;
+ else if (! m68k_quick
+ && instring[3] != 'q'
+ && instring[4] != 'q')
+ losing++;
break;
case 'O':
- if (opP->mode != DREG && opP->mode != IMMED)
+ if (opP->mode != DREG
+ && opP->mode != IMMED
+ && opP->mode != ABSL)
losing++;
break;
case 'Q':
if (opP->mode != IMMED)
losing++;
- else
- {
- long t;
-
- t = get_num (opP->con1, 80);
- if (t < 1 || t > 8 || isvar (opP->con1))
- losing++;
- }
+ else if (opP->disp.exp.X_op != O_constant
+ || opP->disp.exp.X_add_number < 1
+ || opP->disp.exp.X_add_number > 8)
+ losing++;
+ else if (! m68k_quick
+ && (strncmp (instring, "add", 3) == 0
+ || strncmp (instring, "sub", 3) == 0)
+ && instring[3] != 'q')
+ losing++;
break;
case 'R':
break;
case 'r':
- if (opP->mode != AINDR && opP->mode != DINDR)
+ if (opP->mode != AINDR
+ && (opP->mode != BASE
+ || (opP->reg != 0
+ && opP->reg != ZADDR0)
+ || opP->disp.exp.X_op != O_absent
+ || ((opP->index.reg < DATA0
+ || opP->index.reg > DATA7)
+ && (opP->index.reg < ADDR0
+ || opP->index.reg > ADDR7))
+ || opP->index.size != SIZE_UNSPEC
+ || opP->index.scale != 1))
losing++;
break;
case 's':
- if (opP->mode != MSCR || !(opP->reg == FPI || opP->reg == FPS || opP->reg == FPC))
+ if (opP->mode != CONTROL
+ || ! (opP->reg == FPI
+ || opP->reg == FPS
+ || opP->reg == FPC))
losing++;
break;
case 'S':
- if (opP->mode != MSCR || opP->reg != SR)
+ if (opP->mode != CONTROL || opP->reg != SR)
losing++;
break;
case 't':
if (opP->mode != IMMED)
losing++;
- else
- {
- long t = get_num (opP->con1, 80);
- if (t < 0 || t > 7 || isvar (opP->con1))
- losing++;
- }
+ else if (opP->disp.exp.X_op != O_constant
+ || opP->disp.exp.X_add_number < 0
+ || opP->disp.exp.X_add_number > 7)
+ losing++;
break;
case 'U':
- if (opP->mode != MSCR || opP->reg != USP)
+ if (opP->mode != CONTROL || opP->reg != USP)
losing++;
break;
#ifndef NO_68851
/* Memory addressing mode used by pflushr */
case '|':
- if (opP->mode == MSCR || opP->mode == DREG ||
- opP->mode == AREG || opP->mode == REGLST)
+ if (opP->mode == CONTROL
+ || opP->mode == FPREG
+ || opP->mode == DREG
+ || opP->mode == AREG
+ || opP->mode == REGLST)
+ losing++;
+ /* We should accept immediate operands, but they
+ supposedly have to be quad word, and we don't
+ handle that. I would like to see what a Motorola
+ assembler does before doing something here. */
+ if (opP->mode == IMMED)
losing++;
break;
case 'f':
- if (opP->mode != MSCR || (opP->reg != SFC && opP->reg != DFC))
+ if (opP->mode != CONTROL
+ || (opP->reg != SFC && opP->reg != DFC))
+ losing++;
+ break;
+
+ case '0':
+ if (opP->mode != CONTROL || opP->reg != TC)
losing++;
break;
- case 'P':
- if (opP->mode != MSCR
- || (opP->reg != TC && opP->reg != CAL
- && opP->reg != VAL && opP->reg != SCC && opP->reg != AC))
+ case '1':
+ if (opP->mode != CONTROL || opP->reg != AC)
+ losing++;
+ break;
+
+ case '2':
+ if (opP->mode != CONTROL
+ || (opP->reg != CAL
+ && opP->reg != VAL
+ && opP->reg != SCC))
losing++;
break;
case 'V':
- if (opP->reg != VAL)
+ if (opP->mode != CONTROL
+ || opP->reg != VAL)
losing++;
break;
case 'W':
- if (opP->mode != MSCR
- || (opP->reg != DRP && opP->reg != SRP
+ if (opP->mode != CONTROL
+ || (opP->reg != DRP
+ && opP->reg != SRP
&& opP->reg != CRP))
losing++;
break;
case 'X':
- if (opP->mode != MSCR ||
- (!(opP->reg >= BAD && opP->reg <= BAD + 7) &&
- !(opP->reg >= BAC && opP->reg <= BAC + 7)))
+ if (opP->mode != CONTROL
+ || (!(opP->reg >= BAD && opP->reg <= BAD + 7)
+ && !(opP->reg >= BAC && opP->reg <= BAC + 7)))
losing++;
break;
case 'Y':
- if (opP->reg != PSR)
+ if (opP->mode != CONTROL || opP->reg != PSR)
losing++;
break;
case 'Z':
- if (opP->reg != PCSR)
+ if (opP->mode != CONTROL || opP->reg != PCSR)
losing++;
break;
#endif
case 'c':
- if (opP->reg != NC
- && opP->reg != IC
- && opP->reg != DC
- && opP->reg != BC)
+ if (opP->mode != CONTROL
+ || (opP->reg != NC
+ && opP->reg != IC
+ && opP->reg != DC
+ && opP->reg != BC))
{
losing++;
} /* not a cache specifier. */
case '_':
if (opP->mode != ABSL)
- {
- ++losing;
- } /* not absolute */
+ ++losing;
break;
default:
- as_fatal ("Internal error: Operand mode %c unknown in line %d of file \"%s\"",
- *s, __LINE__, __FILE__);
+ abort ();
} /* switch on type of operand */
if (losing)
&& !(ok_arch & current_architecture))
{
char buf[200], *cp;
- int len;
- strcpy (buf, "invalid instruction for this architecture; needs ");
+
+ strcpy (buf,
+ "invalid instruction for this architecture; needs ");
cp = buf + strlen (buf);
switch (ok_arch)
{
default:
{
int got_one = 0, idx;
- static const struct
- {
- int arch;
- const char *name;
- }
- archs[] =
- {
- { m68000, "68000" },
- { m68010, "68010" },
- { m68020, "68020" },
- { m68030, "68030" },
- { m68040, "68040" },
- { m68060, "68060" },
- { cpu32, "cpu32" },
- { m68881, "68881" },
- { m68851, "68851" }
- };
- for (idx = 0; idx < sizeof (archs) / sizeof (archs[0]); idx++)
+ for (idx = 0; idx < sizeof (archs) / sizeof (archs[0]);
+ idx++)
{
- if (archs[idx].arch & ok_arch)
+ if ((archs[idx].arch & ok_arch)
+ && ! archs[idx].alias)
{
if (got_one)
{
}
}
}
- len = cp - buf + 1;
- cp = malloc (len);
+ cp = xmalloc (strlen (buf) + 1);
strcpy (cp, buf);
the_ins.error = cp;
}
case '?':
case '/':
case '`':
+ case '<':
+ case '>':
+ case 'm':
+ case 'n':
+ case 'o':
+ case 'p':
#ifndef NO_68851
case '|':
#endif
case IMMED:
tmpreg = 0x3c; /* 7.4 */
if (strchr ("bwl", s[1]))
- nextword = get_num (opP->con1, 80);
+ nextword = get_num (&opP->disp, 80);
else
- nextword = get_num (opP->con1, 0);
- if (isvar (opP->con1))
- add_fix (s[1], opP->con1, 0);
+ nextword = get_num (&opP->disp, 0);
+ if (isvar (&opP->disp))
+ add_fix (s[1], &opP->disp, 0, 0);
switch (s[1])
{
case 'b':
addword (nextword);
baseo = 0;
break;
+ case 'W':
+ if (!issword (nextword))
+ opP->error = "operand out of range";
+ addword (nextword);
+ baseo = 0;
+ break;
case 'l':
addword (nextword >> 16);
addword (nextword);
outro = -1;
break;
default:
- as_fatal ("Internal error: Can't decode %c%c in line %d of file \"%s\"",
- *s, s[1], __LINE__, __FILE__);
+ abort ();
}
if (!baseo)
break;
/* We gotta put out some float */
- if (op (opP->con1) != O_big)
+ if (op (&opP->disp) != O_big)
{
valueT val;
int gencnt;
/* Can other cases happen here? */
- if (op (opP->con1) != O_constant)
+ if (op (&opP->disp) != O_constant)
abort ();
- val = (valueT) offs (opP->con1);
+ val = (valueT) offs (&opP->disp);
gencnt = 0;
do
{
++gencnt;
}
while (val != 0);
- offs (opP->con1) = gencnt;
+ offs (&opP->disp) = gencnt;
}
- if (offs (opP->con1) > 0)
+ if (offs (&opP->disp) > 0)
{
- if (offs (opP->con1) > baseo)
+ if (offs (&opP->disp) > baseo)
{
- as_warn ("Bignum too big for %c format; truncated", s[1]);
- offs (opP->con1) = baseo;
+ as_warn ("Bignum too big for %c format; truncated",
+ s[1]);
+ offs (&opP->disp) = baseo;
}
- baseo -= offs (opP->con1);
+ baseo -= offs (&opP->disp);
while (baseo--)
addword (0);
- for (wordp = generic_bignum + offs (opP->con1) - 1; offs (opP->con1)--; --wordp)
+ for (wordp = generic_bignum + offs (&opP->disp) - 1;
+ offs (&opP->disp)--;
+ --wordp)
addword (*wordp);
break;
}
case AINC:
tmpreg = 0x18 + opP->reg - ADDR; /* 3.areg */
break;
- case AOFF:
+ case DISP:
+
+ nextword = get_num (&opP->disp, 80);
+
+ if (opP->reg == PC
+ && ! isvar (&opP->disp)
+ && m68k_abspcadd)
+ {
+ opP->disp.exp.X_op = O_symbol;
+#ifndef BFD_ASSEMBLER
+ opP->disp.exp.X_add_symbol = &abs_symbol;
+#else
+ opP->disp.exp.X_add_symbol =
+ section_symbol (absolute_section);
+#endif
+ }
- nextword = get_num (opP->con1, 80);
/* Force into index mode. Hope this works */
/* We do the first bit for 32-bit displacements, and the
inefficiency for the sake of working output. */
if (!issword (nextword)
- || (isvar (opP->con1)
- && ((opP->con1->e_siz == 0
- && flag_short_refs == 0)
- || opP->con1->e_siz == 3)))
+ || (isvar (&opP->disp)
+ && ((opP->disp.size == SIZE_UNSPEC
+ && flag_short_refs == 0
+ && cpu_of_arch (current_architecture) >= m68020)
+ || opP->disp.size == SIZE_LONG)))
{
-
+ if (cpu_of_arch (current_architecture) < m68020)
+ opP->error =
+ "displacement too large for this architecture; needs 68020 or higher";
if (opP->reg == PC)
tmpreg = 0x3B; /* 7.3 */
else
tmpreg = 0x30 + opP->reg - ADDR; /* 6.areg */
- if (isvar (opP->con1))
+ if (isvar (&opP->disp))
{
if (opP->reg == PC)
{
- addword (0x0170);
- opP->con1->e_exp.X_add_number += 6;
- add_fix ('l', opP->con1, 1);
- addword (0), addword (0);
- break;
+ if (opP->disp.size == SIZE_LONG
+#ifdef OBJ_ELF
+ /* If the displacement needs pic
+ relocation it cannot be relaxed. */
+ || opP->disp.pic_reloc != pic_none
+#endif
+ )
+ {
+ addword (0x0170);
+ add_fix ('l', &opP->disp, 1, 2);
+ }
+ else
+ {
+ add_frag (adds (&opP->disp),
+ offs (&opP->disp),
+ TAB (PCLEA, SZ_UNDEF));
+ break;
+ }
}
else
{
addword (0x0170);
- add_fix ('l', opP->con1, 0);
+ add_fix ('l', &opP->disp, 0, 0);
}
}
else
else
tmpreg = 0x28 + opP->reg - ADDR; /* 5.areg */
- if (isvar (opP->con1))
+ if (isvar (&opP->disp))
{
if (opP->reg == PC)
{
- opP->con1->e_exp.X_add_number += 2;
- add_fix ('w', opP->con1, 1);
+ add_fix ('w', &opP->disp, 1, 0);
}
else
- add_fix ('w', opP->con1, 0);
+ add_fix ('w', &opP->disp, 0, 0);
}
}
addword (nextword);
break;
- case APODX:
- case AMIND:
- case APRDX:
- know (current_architecture & m68020up);
- /* intentional fall-through */
- case AINDX:
+ case POST:
+ case PRE:
+ case BASE:
nextword = 0;
- baseo = get_num (opP->con1, 80);
- outro = get_num (opP->con2, 80);
+ baseo = get_num (&opP->disp, 80);
+ if (opP->mode == POST || opP->mode == PRE)
+ outro = get_num (&opP->odisp, 80);
/* Figure out the `addressing mode'.
Also turn on the BASE_DISABLE bit, if needed. */
if (opP->reg == PC || opP->reg == ZPC)
{
- tmpreg = 0x3b;/* 7.3 */
+ tmpreg = 0x3b; /* 7.3 */
if (opP->reg == ZPC)
nextword |= 0x80;
}
- else if (opP->reg == FAIL)
+ else if (opP->reg == 0)
{
nextword |= 0x80;
- tmpreg = 0x30;/* 6.garbage */
+ tmpreg = 0x30; /* 6.garbage */
+ }
+ else if (opP->reg >= ZADDR0 && opP->reg <= ZADDR7)
+ {
+ nextword |= 0x80;
+ tmpreg = 0x30 + opP->reg - ZADDR0;
}
else
tmpreg = 0x30 + opP->reg - ADDR; /* 6.areg */
- siz1 = (opP->con1) ? opP->con1->e_siz : 0;
- siz2 = (opP->con2) ? opP->con2->e_siz : 0;
+ siz1 = opP->disp.size;
+ if (opP->mode == POST || opP->mode == PRE)
+ siz2 = opP->odisp.size;
+ else
+ siz2 = SIZE_UNSPEC;
/* Index register stuff */
- if (opP->ireg >= DATA + 0 && opP->ireg <= ADDR + 7)
+ if (opP->index.reg != 0
+ && opP->index.reg >= DATA
+ && opP->index.reg <= ADDR7)
{
- nextword |= (opP->ireg - DATA) << 12;
+ nextword |= (opP->index.reg - DATA) << 12;
- if (opP->isiz == 0 || opP->isiz == 3)
+ if (opP->index.size == SIZE_LONG
+ || (opP->index.size == SIZE_UNSPEC
+ && m68k_index_width_default == SIZE_LONG))
nextword |= 0x800;
- switch (opP->imul)
+
+ if ((opP->index.scale != 1
+ && cpu_of_arch (current_architecture) < m68020)
+ || (opP->index.scale == 8
+ && current_architecture == mcf5200))
+ {
+ opP->error =
+ "scale factor invalid on this architecture; needs cpu32 or 68020 or higher";
+ }
+
+ switch (opP->index.scale)
{
case 1:
break;
nextword |= 0x600;
break;
default:
- as_fatal ("failed sanity check.");
+ abort ();
}
/* IF its simple,
GET US OUT OF HERE! */
- /* Must be INDEX, with an index
- register. Address register
- cannot be ZERO-PC, and either
- :b was forced, or we know
- it will fit */
- if (opP->mode == AINDX
- && opP->reg != FAIL
- && opP->reg != ZPC
- && (siz1 == 1
- || (issbyte (baseo)
- && !isvar (opP->con1))))
+ /* Must be INDEX, with an index register. Address
+ register cannot be ZERO-PC, and either :b was
+ forced, or we know it will fit. For a 68000 or
+ 68010, force this mode anyways, because the
+ larger modes aren't supported. */
+ if (opP->mode == BASE
+ && ((opP->reg >= ADDR0
+ && opP->reg <= ADDR7)
+ || opP->reg == PC))
{
- nextword += baseo & 0xff;
- addword (nextword);
- if (isvar (opP->con1))
- add_fix ('B', opP->con1, 0);
- break;
+ if (siz1 == SIZE_BYTE
+ || cpu_of_arch (current_architecture) < m68020
+ || (siz1 == SIZE_UNSPEC
+ && ! isvar (&opP->disp)
+ && issbyte (baseo)))
+ {
+ nextword += baseo & 0xff;
+ addword (nextword);
+ if (isvar (&opP->disp))
+ {
+ /* Do a byte relocation. If it doesn't
+ fit (possible on m68000) let the
+ fixup processing complain later. */
+ if (opP->reg == PC)
+ add_fix ('B', &opP->disp, 1, 1);
+ else
+ add_fix ('B', &opP->disp, 0, 0);
+ }
+ else if (siz1 != SIZE_BYTE)
+ {
+ if (siz1 != SIZE_UNSPEC)
+ as_warn ("Forcing byte displacement");
+ if (! issbyte (baseo))
+ opP->error = "byte displacement out of range";
+ }
+
+ break;
+ }
+ else if (siz1 == SIZE_UNSPEC
+ && opP->reg == PC
+ && isvar (&opP->disp)
+ && subs (&opP->disp) == NULL
+#ifdef OBJ_ELF
+ /* If the displacement needs pic
+ relocation it cannot be relaxed. */
+ && opP->disp.pic_reloc == pic_none
+#endif
+ )
+ {
+ /* The code in md_convert_frag_1 needs to be
+ able to adjust nextword. Call frag_grow
+ to ensure that we have enough space in
+ the frag obstack to make all the bytes
+ contiguous. */
+ frag_grow (14);
+ nextword += baseo & 0xff;
+ addword (nextword);
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (PCINDEX, SZ_UNDEF));
+
+ break;
+ }
}
}
else
- nextword |= 0x40; /* No index reg */
+ {
+ nextword |= 0x40; /* No index reg */
+ if (opP->index.reg >= ZDATA0
+ && opP->index.reg <= ZDATA7)
+ nextword |= (opP->index.reg - ZDATA0) << 12;
+ else if (opP->index.reg >= ZADDR0
+ || opP->index.reg <= ZADDR7)
+ nextword |= (opP->index.reg - ZADDR0 + 8) << 12;
+ }
/* It isn't simple. */
+
+ if (cpu_of_arch (current_architecture) < m68020)
+ opP->error =
+ "invalid operand mode for this architecture; needs 68020 or higher";
+
nextword |= 0x100;
/* If the guy specified a width, we assume that it is
wide enough. Maybe it isn't. If so, we lose. */
switch (siz1)
{
- case 0:
- if (isvar (opP->con1) || !issword (baseo))
+ case SIZE_UNSPEC:
+ if (isvar (&opP->disp)
+ ? m68k_rel32
+ : ! issword (baseo))
{
- siz1 = 3;
+ siz1 = SIZE_LONG;
nextword |= 0x30;
}
- else if (baseo == 0)
+ else if (! isvar (&opP->disp) && baseo == 0)
nextword |= 0x10;
else
{
nextword |= 0x20;
- siz1 = 2;
+ siz1 = SIZE_WORD;
}
break;
- case 1:
- as_warn ("Byte dispacement won't work. Defaulting to :w");
- case 2:
+ case SIZE_BYTE:
+ as_warn (":b not permitted; defaulting to :w");
+ /* Fall through. */
+ case SIZE_WORD:
nextword |= 0x20;
break;
- case 3:
+ case SIZE_LONG:
nextword |= 0x30;
break;
}
/* Figure out innner displacement stuff */
- if (opP->mode != AINDX)
+ if (opP->mode == POST || opP->mode == PRE)
{
+ if (cpu_of_arch (current_architecture) & cpu32)
+ opP->error = "invalid operand mode for this architecture; needs 68020 or higher";
switch (siz2)
{
- case 0:
- if (isvar (opP->con2) || !issword (outro))
+ case SIZE_UNSPEC:
+ if (isvar (&opP->odisp)
+ ? m68k_rel32
+ : ! issword (outro))
{
- siz2 = 3;
+ siz2 = SIZE_LONG;
nextword |= 0x3;
}
- else if (outro == 0)
+ else if (! isvar (&opP->odisp) && outro == 0)
nextword |= 0x1;
else
{
nextword |= 0x2;
- siz2 = 2;
+ siz2 = SIZE_WORD;
}
break;
case 1:
- as_warn ("Byte dispacement won't work. Defaulting to :w");
+ as_warn (":b not permitted; defaulting to :w");
+ /* Fall through. */
case 2:
nextword |= 0x2;
break;
nextword |= 0x3;
break;
}
- if (opP->mode == APODX)
+ if (opP->mode == POST
+ && (nextword & 0x40) == 0)
nextword |= 0x04;
- else if (opP->mode == AMIND)
- nextword |= 0x40;
}
addword (nextword);
- if (isvar (opP->con1))
+ if (siz1 != SIZE_UNSPEC && isvar (&opP->disp))
{
if (opP->reg == PC || opP->reg == ZPC)
- {
- opP->con1->e_exp.X_add_number += 6;
- add_fix (siz1 == 3 ? 'l' : 'w', opP->con1, 1);
- }
+ add_fix (siz1 == SIZE_LONG ? 'l' : 'w', &opP->disp, 1, 2);
else
- add_fix (siz1 == 3 ? 'l' : 'w', opP->con1, 0);
+ add_fix (siz1 == SIZE_LONG ? 'l' : 'w', &opP->disp, 0, 0);
}
- if (siz1 == 3)
+ if (siz1 == SIZE_LONG)
addword (baseo >> 16);
- if (siz1)
+ if (siz1 != SIZE_UNSPEC)
addword (baseo);
- if (isvar (opP->con2))
- {
- if (opP->reg == PC || opP->reg == ZPC)
- {
- opP->con1->e_exp.X_add_number += 6;
- add_fix (siz2 == 3 ? 'l' : 'w', opP->con2, 1);
- }
- else
- add_fix (siz2 == 3 ? 'l' : 'w', opP->con2, 0);
- }
- if (siz2 == 3)
+ if (siz2 != SIZE_UNSPEC && isvar (&opP->odisp))
+ add_fix (siz2 == SIZE_LONG ? 'l' : 'w', &opP->odisp, 0, 0);
+ if (siz2 == SIZE_LONG)
addword (outro >> 16);
- if (siz2)
+ if (siz2 != SIZE_UNSPEC)
addword (outro);
break;
case ABSL:
- nextword = get_num (opP->con1, 80);
- switch (opP->con1->e_siz)
+ nextword = get_num (&opP->disp, 80);
+ switch (opP->disp.size)
{
default:
- as_warn ("Unknown size for absolute reference");
- case 0:
- if (!isvar (opP->con1) && issword (offs (opP->con1)))
+ abort ();
+ case SIZE_UNSPEC:
+ if (!isvar (&opP->disp) && issword (offs (&opP->disp)))
{
tmpreg = 0x38; /* 7.0 */
addword (nextword);
}
/* Don't generate pc relative code on 68010 and
68000. */
- if (isvar (opP->con1)
- && !subs (opP->con1)
- && seg (opP->con1) == text_section
- && now_seg == text_section
+ if (isvar (&opP->disp)
+ && !subs (&opP->disp)
+ && adds (&opP->disp)
+#ifdef OBJ_ELF
+ /* If the displacement needs pic relocation it
+ cannot be relaxed. */
+ && opP->disp.pic_reloc == pic_none
+#endif
+ && S_GET_SEGMENT (adds (&opP->disp)) == now_seg
&& cpu_of_arch (current_architecture) >= m68020
&& !flag_long_jumps
&& !strchr ("~%&$?", s[0]))
{
tmpreg = 0x3A; /* 7.2 */
- add_frag (adds (opP->con1),
- offs (opP->con1),
+ add_frag (adds (&opP->disp),
+ offs (&opP->disp),
TAB (PCREL, SZ_UNDEF));
break;
}
- case 3: /* Fall through into long */
- if (isvar (opP->con1))
- add_fix ('l', opP->con1, 0);
+ /* Fall through into long */
+ case SIZE_LONG:
+ if (isvar (&opP->disp))
+ add_fix ('l', &opP->disp, 0, 0);
tmpreg = 0x39;/* 7.1 mode */
addword (nextword >> 16);
addword (nextword);
break;
- case 2: /* Word */
- if (isvar (opP->con1))
- add_fix ('w', opP->con1, 0);
+ case SIZE_WORD: /* Word */
+ if (isvar (&opP->disp))
+ add_fix ('w', &opP->disp, 0, 0);
tmpreg = 0x38;/* 7.0 mode */
addword (nextword);
break;
}
break;
- case DINDR:
- as_bad ("invalid indirect register");
- break;
- case MSCR:
+ case CONTROL:
+ case FPREG:
default:
as_bad ("unknown/incorrect operand");
/* abort(); */
tmpreg = 80;
break;
}
- tmpreg = get_num (opP->con1, tmpreg);
- if (isvar (opP->con1))
- add_fix (s[1], opP->con1, 0);
+ tmpreg = get_num (&opP->disp, tmpreg);
+ if (isvar (&opP->disp))
+ add_fix (s[1], &opP->disp, 0, 0);
switch (s[1])
{
case 'b': /* Danger: These do no check for
if (!isbyte (tmpreg))
opP->error = "out of range";
insop (tmpreg, opcode);
- if (isvar (opP->con1))
- the_ins.reloc[the_ins.nrel - 1].n = (opcode->m_codenum) * 2;
+ if (isvar (&opP->disp))
+ the_ins.reloc[the_ins.nrel - 1].n =
+ (opcode->m_codenum) * 2 + 1;
+ break;
+ case 'B':
+ if (!issbyte (tmpreg))
+ opP->error = "out of range";
+ opcode->m_opcode |= tmpreg;
+ if (isvar (&opP->disp))
+ the_ins.reloc[the_ins.nrel - 1].n = opcode->m_codenum * 2 - 1;
break;
case 'w':
if (!isword (tmpreg))
opP->error = "out of range";
insop (tmpreg, opcode);
- if (isvar (opP->con1))
+ if (isvar (&opP->disp))
+ the_ins.reloc[the_ins.nrel - 1].n = (opcode->m_codenum) * 2;
+ break;
+ case 'W':
+ if (!issword (tmpreg))
+ opP->error = "out of range";
+ insop (tmpreg, opcode);
+ if (isvar (&opP->disp))
the_ins.reloc[the_ins.nrel - 1].n = (opcode->m_codenum) * 2;
break;
case 'l':
backwards. */
insop (tmpreg, opcode);
insop (tmpreg >> 16, opcode);
- if (isvar (opP->con1))
+ if (isvar (&opP->disp))
the_ins.reloc[the_ins.nrel - 1].n = (opcode->m_codenum) * 2;
break;
case '3':
install_operand (s[1], tmpreg);
break;
default:
- as_fatal ("Internal error: Unknown mode #%c in line %d of file \"%s\"", s[1], __LINE__, __FILE__);
+ abort ();
}
break;
break;
case 'B':
- tmpreg = get_num (opP->con1, 80);
+ tmpreg = get_num (&opP->disp, 80);
switch (s[1])
{
case 'B':
- /* Needs no offsetting */
- add_fix ('B', opP->con1, 1);
+ /* The pc_fix argument winds up in fx_pcrel_adjust,
+ which is a char, and may therefore be unsigned. We
+ want to pass -1, but we pass 64 instead, and convert
+ back in md_pcrel_from. */
+ add_fix ('B', &opP->disp, 1, 64);
break;
case 'W':
- /* Offset the displacement to be relative to byte disp location */
- opP->con1->e_exp.X_add_number += 2;
- add_fix ('w', opP->con1, 1);
+ add_fix ('w', &opP->disp, 1, 0);
addword (0);
break;
case 'L':
long_branch:
- if (cpu_of_arch (current_architecture) < m68020) /* 68000 or 010 */
+ if (cpu_of_arch (current_architecture) < m68020)
as_warn ("Can't use long branches on 68000/68010");
the_ins.opcode[the_ins.numo - 1] |= 0xff;
- /* Offset the displacement to be relative to byte disp location */
- opP->con1->e_exp.X_add_number += 4;
- add_fix ('l', opP->con1, 1);
+ add_fix ('l', &opP->disp, 1, 0);
addword (0);
addword (0);
break;
case 'g':
- if (subs (opP->con1)) /* We can't relax it */
+ if (subs (&opP->disp)) /* We can't relax it */
+ goto long_branch;
+
+#ifdef OBJ_ELF
+ /* If the displacement needs pic relocation it cannot be
+ relaxed. */
+ if (opP->disp.pic_reloc != pic_none)
goto long_branch;
+#endif
- /* This could either be a symbol, or an
- absolute address. No matter, the
- frag hacking will finger it out.
- Not quite: it can't switch from
- BRANCH to BCC68000 for the case
- where opnd is absolute (it needs
- to use the 68000 hack since no
- conditional abs jumps). */
- if (((cpu_of_arch (current_architecture) < m68020) || (0 == adds (opP->con1)))
+ /* This could either be a symbol, or an absolute
+ address. No matter, the frag hacking will finger it
+ out. Not quite: it can't switch from BRANCH to
+ BCC68000 for the case where opnd is absolute (it
+ needs to use the 68000 hack since no conditional abs
+ jumps). */
+ if (((cpu_of_arch (current_architecture) < m68020)
+ || (0 == adds (&opP->disp)))
&& (the_ins.opcode[0] >= 0x6200)
&& (the_ins.opcode[0] <= 0x6f00))
- {
- add_frag (adds (opP->con1), offs (opP->con1), TAB (BCC68000, SZ_UNDEF));
- }
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (BCC68000, SZ_UNDEF));
else
- {
- add_frag (adds (opP->con1), offs (opP->con1), TAB (ABRANCH, SZ_UNDEF));
- }
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (ABRANCH, SZ_UNDEF));
break;
case 'w':
- if (isvar (opP->con1))
+ if (isvar (&opP->disp))
{
#if 1
/* check for DBcc instruction */
{
/* size varies if patch */
/* needed for long form */
- add_frag (adds (opP->con1), offs (opP->con1), TAB (DBCC, SZ_UNDEF));
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (DBCC, SZ_UNDEF));
break;
}
#endif
- /* Don't ask! */
- opP->con1->e_exp.X_add_number += 2;
- add_fix ('w', opP->con1, 1);
+ add_fix ('w', &opP->disp, 1, 0);
}
addword (0);
break;
case 'C': /* Fixed size LONG coproc branches */
- the_ins.opcode[the_ins.numo - 1] |= 0x40;
- /* Offset the displacement to be relative to byte disp location */
- /* Coproc branches don't have a byte disp option, but they are
- compatible with the ordinary branches, which do... */
- opP->con1->e_exp.X_add_number += 4;
- add_fix ('l', opP->con1, 1);
+ add_fix ('l', &opP->disp, 1, 0);
addword (0);
addword (0);
break;
case 'c': /* Var size Coprocesssor branches */
- if (subs (opP->con1))
+ if (subs (&opP->disp))
{
- add_fix ('l', opP->con1, 1);
+ add_fix ('l', &opP->disp, 1, 0);
add_frag ((symbolS *) 0, (long) 0, TAB (FBRANCH, LONG));
}
- else if (adds (opP->con1))
- {
- add_frag (adds (opP->con1), offs (opP->con1), TAB (FBRANCH, SZ_UNDEF));
- }
+ else if (adds (&opP->disp))
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (FBRANCH, SZ_UNDEF));
else
{
- /* add_frag((symbolS *)0,offs(opP->con1),TAB(FBRANCH,SHORT)); */
+ /* add_frag((symbolS *) 0, offs(&opP->disp),
+ TAB(FBRANCH,SHORT)); */
the_ins.opcode[the_ins.numo - 1] |= 0x40;
- add_fix ('l', opP->con1, 1);
+ add_fix ('l', &opP->disp, 1, 0);
+ addword (0);
addword (0);
- addword (4);
}
break;
default:
- as_fatal ("Internal error: operand type B%c unknown in line %d of file \"%s\"",
- s[1], __LINE__, __FILE__);
+ abort ();
}
break;
break;
case 'd': /* JF this is a kludge */
- if (opP->mode == AOFF)
+ install_operand ('s', opP->reg - ADDR);
+ tmpreg = get_num (&opP->disp, 80);
+ if (!issword (tmpreg))
{
- install_operand ('s', opP->reg - ADDR);
- }
- else
- {
- char *tmpP;
-
- tmpP = opP->con1->e_end - 2;
- opP->con1->e_beg++;
- opP->con1->e_end -= 4; /* point to the , */
- baseo = m68k_reg_parse (&tmpP);
- if (baseo < ADDR + 0 || baseo > ADDR + 7)
- {
- as_bad ("Unknown address reg, using A0");
- baseo = 0;
- }
- else
- baseo -= ADDR;
- install_operand ('s', baseo);
- }
- tmpreg = get_num (opP->con1, 80);
- if (!issword (tmpreg))
- {
- as_warn ("Expression out of range, using 0");
- tmpreg = 0;
+ as_warn ("Expression out of range, using 0");
+ tmpreg = 0;
}
addword (tmpreg);
break;
break;
case 'F':
- install_operand (s[1], opP->reg - FPREG);
+ install_operand (s[1], opP->reg - FP0);
break;
case 'I':
- tmpreg = 1 + opP->reg - COPNUM;
- if (tmpreg == 8)
- tmpreg = 0;
+ tmpreg = opP->reg - COP0;
install_operand (s[1], tmpreg);
break;
case PCR:
tmpreg = 0x808;
break;
+ case ROMBAR:
+ tmpreg = 0xC00;
+ break;
+ case RAMBAR0:
+ tmpreg = 0xC04;
+ break;
+ case RAMBAR1:
+ tmpreg = 0xC05;
+ break;
+ case MBAR:
+ tmpreg = 0xC0F;
+ break;
default:
- as_fatal ("failed sanity check.");
+ abort ();
}
install_operand (s[1], tmpreg);
break;
case 'k':
- tmpreg = get_num (opP->con1, 55);
+ tmpreg = get_num (&opP->disp, 55);
install_operand (s[1], tmpreg & 0x7f);
break;
case 'l':
- tmpreg = opP->reg;
+ tmpreg = opP->mask;
if (s[1] == 'w')
{
if (tmpreg & 0x7FF0000)
break;
case 'L':
- tmpreg = opP->reg;
+ tmpreg = opP->mask;
if (s[1] == 'w')
{
if (tmpreg & 0x7FF0000)
break;
case 'M':
- install_operand (s[1], get_num (opP->con1, 60));
+ install_operand (s[1], get_num (&opP->disp, 60));
break;
case 'O':
- tmpreg = (opP->mode == DREG)
- ? 0x20 + opP->reg - DATA
- : (get_num (opP->con1, 40) & 0x1F);
+ tmpreg = ((opP->mode == DREG)
+ ? 0x20 + opP->reg - DATA
+ : (get_num (&opP->disp, 40) & 0x1F));
install_operand (s[1], tmpreg);
break;
case 'Q':
- tmpreg = get_num (opP->con1, 10);
+ tmpreg = get_num (&opP->disp, 10);
if (tmpreg == 8)
tmpreg = 0;
install_operand (s[1], tmpreg);
break;
case 'R':
- case 'r':
- /* This depends on the fact that ADDR registers are
- eight more than their corresponding DATA regs, so
- the result will have the ADDR_REG bit set */
+ /* This depends on the fact that ADDR registers are eight
+ more than their corresponding DATA regs, so the result
+ will have the ADDR_REG bit set */
install_operand (s[1], opP->reg - DATA);
break;
+ case 'r':
+ if (opP->mode == AINDR)
+ install_operand (s[1], opP->reg - DATA);
+ else
+ install_operand (s[1], opP->index.reg - DATA);
+ break;
+
case 's':
if (opP->reg == FPI)
tmpreg = 0x1;
else if (opP->reg == FPC)
tmpreg = 0x4;
else
- as_fatal ("failed sanity check.");
+ abort ();
install_operand (s[1], tmpreg);
break;
break;
case 'T':
- install_operand (s[1], get_num (opP->con1, 30));
+ install_operand (s[1], get_num (&opP->disp, 30));
break;
case 'U': /* Ignore it */
tmpreg = 1;
break;
default:
- as_fatal ("failed sanity check.");
+ abort ();
}
install_operand (s[1], tmpreg);
break;
- case 'P':
+ case '0':
+ case '1':
+ case '2':
switch (opP->reg)
{
case TC:
tmpreg = 7;
break;
default:
- as_fatal ("failed sanity check.");
+ abort ();
}
install_operand (s[1], tmpreg);
break;
case 'V':
if (opP->reg == VAL)
break;
- as_fatal ("failed sanity check.");
+ abort ();
case 'W':
switch (opP->reg)
{
-
case DRP:
tmpreg = 1;
break;
tmpreg = 3;
break;
default:
- as_fatal ("failed sanity check.");
+ abort ();
}
install_operand (s[1], tmpreg);
break;
break;
default:
- as_fatal ("failed sanity check.");
+ abort ();
}
install_operand (s[1], tmpreg);
break;
tmpreg = 3;
break;
default:
- as_fatal ("failed sanity check");
+ abort ();
}
install_operand (s[1], tmpreg);
break;
case 't':
- tmpreg = get_num (opP->con1, 20);
+ tmpreg = get_num (&opP->disp, 20);
install_operand (s[1], tmpreg);
break;
- case '_': /* used only for move16 absolute 32-bit address */
- tmpreg = get_num (opP->con1, 80);
+ case '_': /* used only for move16 absolute 32-bit address */
+ tmpreg = get_num (&opP->disp, 80);
addword (tmpreg >> 16);
addword (tmpreg & 0xFFFF);
break;
default:
- as_fatal ("Internal error: Operand type %c unknown in line %d of file \"%s\"",
- s[0], __LINE__, __FILE__);
+ abort ();
}
}
/* By the time whe get here (FINALLY) the_ins contains the complete
instruction, ready to be emitted. . . */
-} /* m68k_ip() */
-
-/*
- * get_regs := '/' + ?
- * | '-' + <register>
- * | '-' + <register> + ?
- * | <empty>
- * ;
- *
-
- * The idea here must be to scan in a set of registers but I don't
- * understand it. Looks awfully sloppy to me but I don't have any doc on
- * this format so...
-
- *
- *
- */
-
-static int
-get_regs (i, str, opP)
- int i;
- struct m68k_op *opP;
- char *str;
-{
- /* 26, 25, 24, 23-16, 15-8, 0-7 */
- /* Low order 24 bits encoded fpc,fps,fpi,fp7-fp0,a7-a0,d7-d0 */
- unsigned long cur_regs = 0;
- int reg1, reg2;
-
-#define ADD_REG(x) { if(x==FPI) cur_regs|=(1<<24);\
-else if(x==FPS) cur_regs|=(1<<25);\
-else if(x==FPC) cur_regs|=(1<<26);\
-else cur_regs|=(1<<(x-1)); }
-
- reg1 = i;
- for (;;)
- {
- if (*str == '/')
- {
- ADD_REG (reg1);
- str++;
- }
- else if (*str == '-')
- {
- str++;
- reg2 = m68k_reg_parse (&str);
- if (reg2 < DATA || reg2 >= FPREG + 8 || reg1 == FPI || reg1 == FPS || reg1 == FPC)
- {
- opP->error = "unknown register in register list";
- return FAIL;
- }
- while (reg1 <= reg2)
- {
- ADD_REG (reg1);
- reg1++;
- }
- if (*str == '\0')
- break;
- }
- else if (*str == '\0')
- {
- ADD_REG (reg1);
- break;
- }
- else
- {
- opP->error = "unknow character in register list";
- return FAIL;
- }
- /* DJA -- Bug Fix. Did't handle d1-d2/a1 until the following instruction was added */
- if (*str == '/')
- str++;
- reg1 = m68k_reg_parse (&str);
- if ((reg1 < DATA || reg1 >= FPREG + 8) && !(reg1 == FPI || reg1 == FPS || reg1 == FPC))
- {
- opP->error = "unknown register in register list";
- return FAIL;
- }
- }
- opP->reg = cur_regs;
- return OK;
-} /* get_regs() */
+}
static int
reverse_16_bits (in)
return out;
} /* reverse_8_bits() */
+/* Cause an extra frag to be generated here, inserting up to 10 bytes
+ (that value is chosen in the frag_var call in md_assemble). TYPE
+ is the subtype of the frag to be generated; its primary type is
+ rs_machine_dependent.
+
+ The TYPE parameter is also used by md_convert_frag_1 and
+ md_estimate_size_before_relax. The appropriate type of fixup will
+ be emitted by md_convert_frag_1.
+
+ ADD becomes the FR_SYMBOL field of the frag, and OFF the FR_OFFSET. */
static void
install_operand (mode, val)
int mode;
break;
case 'b':
case 'w':
+ case 'W':
case 'l':
break;
case 'e':
register int parens;
register int c;
register char *beg_str;
+ int inquote = 0;
if (!str)
{
return str;
}
beg_str = str;
- for (parens = 0; *str && (parens > 0 || notend (str)); str++)
+ for (parens = 0; *str && (parens > 0 || inquote || notend (str)); str++)
{
- if (*str == '(')
- parens++;
- else if (*str == ')')
+ if (! inquote)
{
- if (!parens)
- { /* ERROR */
- opP->error = "Extra )";
- return str;
+ if (*str == '(')
+ parens++;
+ else if (*str == ')')
+ {
+ if (!parens)
+ { /* ERROR */
+ opP->error = "Extra )";
+ return str;
+ }
+ --parens;
}
- --parens;
}
+ if (flag_mri && *str == '\'')
+ inquote = ! inquote;
}
if (!*str && parens)
{ /* ERROR */
}
c = *str;
*str = '\0';
- if (m68k_ip_op (beg_str, opP) == FAIL)
+ if (m68k_ip_op (beg_str, opP) != 0)
{
*str = c;
return str;
return str;
}
-/* See the comment up above where the #define notend(... is */
-#if 0
-notend (s)
- char *s;
-{
- if (*s == ',')
- return 0;
- if (*s == '{' || *s == '}')
- return 0;
- if (*s != ':')
- return 1;
- /* This kludge here is for the division cmd, which is a kludge */
- if (index ("aAdD#", s[1]))
- return 0;
- return 1;
-}
-
-#endif
-
/* This is the guts of the machine-dependent assembler. STR points to a
machine dependent instruction. This function is supposed to emit
the frags/bytes it assembles to.
{ "fp", ADDR6 },
{ "a7", ADDR7 },
{ "sp", ADDR7 },
+ { "ssp", ADDR7 },
{ "fp0", FP0 },
{ "fp1", FP1 },
{ "fp2", FP2 },
{ "fpsr", FPS },
{ "fpc", FPC },
{ "fpcr", FPC },
+ { "control", FPC },
+ { "status", FPS },
+ { "iaddr", FPI },
{ "cop0", COP0 },
{ "cop1", COP1 },
{ "ccr", CCR },
{ "cc", CCR },
- { "usp", USP },
- { "isp", ISP },
- { "sfc", SFC },
- { "dfc", DFC },
- { "cacr", CACR },
- { "caar", CAAR },
-
- { "vbr", VBR },
-
- { "msp", MSP },
- { "itt0", ITT0 },
- { "itt1", ITT1 },
- { "dtt0", DTT0 },
- { "dtt1", DTT1 },
- { "mmusr", MMUSR },
- { "tc", TC },
- { "srp", SRP },
- { "urp", URP },
+ /* control registers */
+ { "sfc", SFC }, /* Source Function Code */
+ { "sfcr", SFC },
+ { "dfc", DFC }, /* Destination Function Code */
+ { "dfcr", DFC },
+ { "cacr", CACR }, /* Cache Control Register */
+ { "caar", CAAR }, /* Cache Address Register */
+
+ { "usp", USP }, /* User Stack Pointer */
+ { "vbr", VBR }, /* Vector Base Register */
+ { "msp", MSP }, /* Master Stack Pointer */
+ { "isp", ISP }, /* Interrupt Stack Pointer */
+
+ { "itt0", ITT0 }, /* Instruction Transparent Translation Reg 0 */
+ { "itt1", ITT1 }, /* Instruction Transparent Translation Reg 1 */
+ { "dtt0", DTT0 }, /* Data Transparent Translation Register 0 */
+ { "dtt1", DTT1 }, /* Data Transparent Translation Register 1 */
+
+ /* 68ec040 versions of same */
+ { "iacr0", ITT0 }, /* Instruction Access Control Register 0 */
+ { "iacr1", ITT1 }, /* Instruction Access Control Register 0 */
+ { "dacr0", DTT0 }, /* Data Access Control Register 0 */
+ { "dacr1", DTT1 }, /* Data Access Control Register 0 */
+
+ /* mcf5200 versions of same. The ColdFire programmer's reference
+ manual indicated that the order is 2,3,0,1, but Ken Rose
+ <rose@netcom.com> says that 0,1,2,3 is the correct order. */
+ { "acr0", ITT0 }, /* Access Control Unit 0 */
+ { "acr1", ITT1 }, /* Access Control Unit 1 */
+ { "acr2", DTT0 }, /* Access Control Unit 2 */
+ { "acr3", DTT1 }, /* Access Control Unit 3 */
+
+ { "tc", TC }, /* MMU Translation Control Register */
+ { "tcr", TC },
+
+ { "mmusr", MMUSR }, /* MMU Status Register */
+ { "srp", SRP }, /* User Root Pointer */
+ { "urp", URP }, /* Supervisor Root Pointer */
+
{ "buscr", BUSCR },
{ "pcr", PCR },
+ { "rombar", ROMBAR }, /* ROM Base Address Register */
+ { "rambar0", RAMBAR0 }, /* ROM Base Address Register */
+ { "rambar1", RAMBAR1 }, /* ROM Base Address Register */
+ { "mbar", MBAR }, /* Module Base Address Register */
+ /* end of control registers */
+
{ "ac", AC },
{ "bc", BC },
{ "cal", CAL },
/* 68ec030 access control unit, identical to 030 MMU status reg */
{ "acusr", PSR },
+ /* Suppressed data and address registers. */
+ { "zd0", ZDATA0 },
+ { "zd1", ZDATA1 },
+ { "zd2", ZDATA2 },
+ { "zd3", ZDATA3 },
+ { "zd4", ZDATA4 },
+ { "zd5", ZDATA5 },
+ { "zd6", ZDATA6 },
+ { "zd7", ZDATA7 },
+ { "za0", ZADDR0 },
+ { "za1", ZADDR1 },
+ { "za2", ZADDR2 },
+ { "za3", ZADDR3 },
+ { "za4", ZADDR4 },
+ { "za5", ZADDR5 },
+ { "za6", ZADDR6 },
+ { "za7", ZADDR7 },
+
{ 0, 0 }
};
md_assemble (str)
char *str;
{
- char *er;
+ const char *er;
short *fromP;
char *toP = NULL;
int m, n = 0;
char *to_beg_P;
int shorts_this_frag;
+ fixS *fixP;
+
+ /* In MRI mode, the instruction and operands are separated by a
+ space. Anything following the operands is a comment. The label
+ has already been removed. */
+ if (flag_mri)
+ {
+ char *s;
+ int fields = 0;
+ int infield = 0;
+ int inquote = 0;
+
+ for (s = str; *s != '\0'; s++)
+ {
+ if ((*s == ' ' || *s == '\t') && ! inquote)
+ {
+ if (infield)
+ {
+ ++fields;
+ if (fields >= 2)
+ {
+ *s = '\0';
+ break;
+ }
+ infield = 0;
+ }
+ }
+ else
+ {
+ if (! infield)
+ infield = 1;
+ if (*s == '\'')
+ inquote = ! inquote;
+ }
+ }
+ }
memset ((char *) (&the_ins), '\0', sizeof (the_ins));
m68k_ip (str);
er = the_ins.error;
if (!er)
{
- for (n = the_ins.numargs; n; --n)
+ for (n = 0; n < the_ins.numargs; n++)
if (the_ins.operands[n].error)
{
er = the_ins.operands[n].error;
return;
}
+ /* If there is a current label, record that it marks an instruction. */
+ if (current_label != NULL)
+ {
+ current_label->text = 1;
+ current_label = NULL;
+ }
+
if (the_ins.nfrag == 0)
{
/* No frag hacking involved; just put it out */
n = 1;
break;
case '3':
- n = 2;
+ n = 1;
break;
case 'w':
n = 2;
the_ins.reloc[m].wid);
}
- fix_new_exp (frag_now,
- ((toP - frag_now->fr_literal)
- - the_ins.numo * 2 + the_ins.reloc[m].n),
- n,
- &the_ins.reloc[m].exp,
- the_ins.reloc[m].pcrel,
- NO_RELOC);
+ fixP = fix_new_exp (frag_now,
+ ((toP - frag_now->fr_literal)
+ - the_ins.numo * 2 + the_ins.reloc[m].n),
+ n,
+ &the_ins.reloc[m].exp,
+ the_ins.reloc[m].pcrel,
+ get_reloc_code (n, the_ins.reloc[m].pcrel,
+ the_ins.reloc[m].pic_reloc));
+ fixP->fx_pcrel_adjust = the_ins.reloc[m].pcrel_fix;
+ if (the_ins.reloc[m].wid == 'B')
+ fixP->fx_signed = 1;
}
return;
}
the_ins.reloc[m].wid = 0;
wid = (wid == 'b') ? 1 : (wid == 'w') ? 2 : (wid == 'l') ? 4 : 4000;
- fix_new_exp (frag_now,
- ((toP - frag_now->fr_literal)
- - the_ins.numo * 2 + the_ins.reloc[m].n),
- wid,
- &the_ins.reloc[m].exp,
- the_ins.reloc[m].pcrel,
- NO_RELOC);
+ fixP = fix_new_exp (frag_now,
+ ((toP - frag_now->fr_literal)
+ - the_ins.numo * 2 + the_ins.reloc[m].n),
+ wid,
+ &the_ins.reloc[m].exp,
+ the_ins.reloc[m].pcrel,
+ get_reloc_code (wid, the_ins.reloc[m].pcrel,
+ the_ins.reloc[m].pic_reloc));
+ fixP->fx_pcrel_adjust = the_ins.reloc[m].pcrel_fix;
}
(void) frag_var (rs_machine_dependent, 10, 0,
(relax_substateT) (the_ins.fragb[n].fragty),
the_ins.reloc[m].wid = 0;
wid = (wid == 'b') ? 1 : (wid == 'w') ? 2 : (wid == 'l') ? 4 : 4000;
- fix_new_exp (frag_now,
- ((the_ins.reloc[m].n + toP - frag_now->fr_literal)
- - shorts_this_frag * 2),
- wid,
- &the_ins.reloc[m].exp,
- the_ins.reloc[m].pcrel,
- NO_RELOC);
+ fixP = fix_new_exp (frag_now,
+ ((the_ins.reloc[m].n + toP - frag_now->fr_literal)
+ - shorts_this_frag * 2),
+ wid,
+ &the_ins.reloc[m].exp,
+ the_ins.reloc[m].pcrel,
+ get_reloc_code (wid, the_ins.reloc[m].pcrel,
+ the_ins.reloc[m].pic_reloc));
+ fixP->fx_pcrel_adjust = the_ins.reloc[m].pcrel_fix;
}
}
-/* See BREAK_UP_BIG_DECL definition, above. */
-static struct m68k_opcode *
-opcode_ptr (i)
- int i;
-{
-#ifdef DO_BREAK_UP_BIG_DECL
- int lim1 = sizeof (m68k_opcodes) / sizeof (m68k_opcodes[0]);
- if (i >= lim1)
- return m68k_opcodes_2 + (i - lim1);
-#endif
- return m68k_opcodes + i;
-}
-
void
md_begin ()
{
my lord ghod hath spoken, so we do it this way. Excuse the ugly var
names. */
- register CONST struct m68k_opcode *ins;
+ register const struct m68k_opcode *ins;
register struct m68k_incant *hack, *slak;
register const char *retval = 0; /* empty string, or error msg text */
register unsigned int i;
register char c;
+ if (flag_mri)
+ {
+ flag_reg_prefix_optional = 1;
+ m68k_abspcadd = 1;
+ if (! m68k_rel32_from_cmdline)
+ m68k_rel32 = 0;
+ }
+
op_hash = hash_new ();
obstack_begin (&robyn, 4000);
- for (i = 0; i < numopcodes; i++)
+ for (i = 0; i < m68k_numopcodes; i++)
{
hack = slak = (struct m68k_incant *) obstack_alloc (&robyn, sizeof (struct m68k_incant));
do
{
- ins = opcode_ptr (i);
+ ins = &m68k_opcodes[i];
/* We *could* ignore insns that don't match our arch here
but just leaving them out of the hash. */
slak->m_operands = ins->args;
slak->m_opcode = ins->opcode;
/* This is kludgey */
slak->m_codenum = ((ins->match) & 0xffffL) ? 2 : 1;
- if (i + 1 != numopcodes
- && !strcmp (ins->name, opcode_ptr (i + 1)->name))
+ if (i + 1 != m68k_numopcodes
+ && !strcmp (ins->name, m68k_opcodes[i + 1].name))
{
slak->m_next = (struct m68k_incant *) obstack_alloc (&robyn, sizeof (struct m68k_incant));
i++;
retval = hash_insert (op_hash, ins->name, (char *) hack);
if (retval)
- as_bad ("Internal Error: Can't hash %s: %s", ins->name, retval);
+ as_fatal ("Internal Error: Can't hash %s: %s", ins->name, retval);
+ }
+
+ for (i = 0; i < m68k_numaliases; i++)
+ {
+ const char *name = m68k_opcode_aliases[i].primary;
+ const char *alias = m68k_opcode_aliases[i].alias;
+ PTR val = hash_find (op_hash, name);
+ if (!val)
+ as_fatal ("Internal Error: Can't find %s in hash table", name);
+ retval = hash_insert (op_hash, alias, val);
+ if (retval)
+ as_fatal ("Internal Error: Can't hash %s: %s", alias, retval);
+ }
+
+ /* In MRI mode, all unsized branches are variable sized. Normally,
+ they are word sized. */
+ if (flag_mri)
+ {
+ static struct m68k_opcode_alias mri_aliases[] =
+ {
+ { "bhi", "jhi", },
+ { "bls", "jls", },
+ { "bcc", "jcc", },
+ { "bcs", "jcs", },
+ { "bne", "jne", },
+ { "beq", "jeq", },
+ { "bvc", "jvc", },
+ { "bvs", "jvs", },
+ { "bpl", "jpl", },
+ { "bmi", "jmi", },
+ { "bge", "jge", },
+ { "blt", "jlt", },
+ { "bgt", "jgt", },
+ { "ble", "jle", },
+ { "bra", "jra", },
+ { "bsr", "jbsr", },
+ };
+
+ for (i = 0; i < sizeof mri_aliases / sizeof mri_aliases[0]; i++)
+ {
+ const char *name = mri_aliases[i].primary;
+ const char *alias = mri_aliases[i].alias;
+ PTR val = hash_find (op_hash, name);
+ if (!val)
+ as_fatal ("Internal Error: Can't find %s in hash table", name);
+ retval = hash_jam (op_hash, alias, val);
+ if (retval)
+ as_fatal ("Internal Error: Can't hash %s: %s", alias, retval);
+ }
}
for (i = 0; i < sizeof (mklower_table); i++)
alt_notend_table['d'] = 1;
alt_notend_table['D'] = 1;
alt_notend_table['#'] = 1;
+ alt_notend_table['&'] = 1;
alt_notend_table['f'] = 1;
alt_notend_table['F'] = 1;
#ifdef REGISTER_PREFIX
alt_notend_table[REGISTER_PREFIX] = 1;
#endif
+ /* We need to put '(' in alt_notend_table to handle
+ cas2 %d0:%d2,%d3:%d4,(%a0):(%a1)
+ */
+ alt_notend_table['('] = 1;
+
+ /* We need to put '@' in alt_notend_table to handle
+ cas2 %d0:%d2,%d3:%d4,@(%d0):@(%d1)
+ */
+ alt_notend_table['@'] = 1;
+
+ /* We need to put digits in alt_notend_table to handle
+ bfextu %d0{24:1},%d0
+ */
+ alt_notend_table['0'] = 1;
+ alt_notend_table['1'] = 1;
+ alt_notend_table['2'] = 1;
+ alt_notend_table['3'] = 1;
+ alt_notend_table['4'] = 1;
+ alt_notend_table['5'] = 1;
+ alt_notend_table['6'] = 1;
+ alt_notend_table['7'] = 1;
+ alt_notend_table['8'] = 1;
+ alt_notend_table['9'] = 1;
+
#ifndef MIT_SYNTAX_ONLY
/* Insert pseudo ops, these have to go into the opcode table since
gas expects pseudo ops to start with a dot */
#endif
init_regtable ();
+
+#ifdef OBJ_ELF
+ record_alignment (text_section, 2);
+ record_alignment (data_section, 2);
+ record_alignment (bss_section, 2);
+#endif
+}
+
+static void
+select_control_regs ()
+{
+ /* Note which set of "movec" control registers is available. */
+ switch (cpu_of_arch (current_architecture))
+ {
+ case m68000:
+ control_regs = m68000_control_regs;
+ break;
+ case m68010:
+ control_regs = m68010_control_regs;
+ break;
+ case m68020:
+ case m68030:
+ control_regs = m68020_control_regs;
+ break;
+ case m68040:
+ control_regs = m68040_control_regs;
+ break;
+ case m68060:
+ control_regs = m68060_control_regs;
+ break;
+ case cpu32:
+ control_regs = cpu32_control_regs;
+ break;
+ case mcf5200:
+ control_regs = mcf5200_control_regs;
+ break;
+ default:
+ abort ();
+ }
}
void
{
if (cpu_of_arch (current_architecture) == 0)
{
- int cpu_type;
-
- if (strcmp (TARGET_CPU, "m68000") == 0
- || strcmp (TARGET_CPU, "m68302") == 0)
- cpu_type = m68000;
- else if (strcmp (TARGET_CPU, "m68010") == 0)
- cpu_type = m68010;
- else if (strcmp (TARGET_CPU, "m68020") == 0
- || strcmp (TARGET_CPU, "m68k") == 0)
- cpu_type = m68020;
- else if (strcmp (TARGET_CPU, "m68030") == 0)
- cpu_type = m68030;
- else if (strcmp (TARGET_CPU, "m68040") == 0)
- cpu_type = m68040;
- else if (strcmp (TARGET_CPU, "m68060") == 0)
- cpu_type = m68060;
- else if (strcmp (TARGET_CPU, "cpu32") == 0
- || strcmp (TARGET_CPU, "m68331") == 0
- || strcmp (TARGET_CPU, "m68332") == 0
- || strcmp (TARGET_CPU, "m68333") == 0
- || strcmp (TARGET_CPU, "m68340") == 0)
- cpu_type = cpu32;
- else
- cpu_type = m68020;
+ int i;
+ const char *default_cpu = TARGET_CPU;
- current_architecture |= cpu_type;
- }
-#if 0 /* Could be doing emulation. */
- if (current_architecture & m68881)
- {
- if (current_architecture & m68000)
- as_bad ("incompatible processors 68000 and 68881/2 specified");
- if (current_architecture & m68010)
- as_bad ("incompatible processors 68010 and 68881/2 specified");
- if (current_architecture & m68040)
- as_bad ("incompatible processors 68040 and 68881/2 specified");
+ if (*default_cpu == 'm')
+ default_cpu++;
+ for (i = 0; i < n_archs; i++)
+ if (strcasecmp (default_cpu, archs[i].name) == 0)
+ break;
+ if (i == n_archs)
+ {
+ as_bad ("unrecognized default cpu `%s' ???", TARGET_CPU);
+ current_architecture |= m68020;
+ }
+ else
+ current_architecture |= archs[i].arch;
}
-#endif
+ /* Permit m68881 specification with all cpus; those that can't work
+ with a coprocessor could be doing emulation. */
if (current_architecture & m68851)
{
if (current_architecture & m68040)
#endif
/* Note which set of "movec" control registers is available. */
- switch (cpu_of_arch (current_architecture))
+ select_control_regs ();
+
+ if (cpu_of_arch (current_architecture) < m68020)
+ md_relax_table[TAB (PCINDEX, BYTE)].rlx_more = 0;
+}
+\f
+/* This is called when a label is defined. */
+
+void
+m68k_frob_label (sym)
+ symbolS *sym;
+{
+ struct label_line *n;
+
+ n = (struct label_line *) xmalloc (sizeof *n);
+ n->next = labels;
+ n->label = sym;
+ as_where (&n->file, &n->line);
+ labels = n;
+ current_label = n;
+}
+
+/* This is called when a value that is not an instruction is emitted. */
+
+void
+m68k_flush_pending_output ()
+{
+ current_label = NULL;
+}
+
+/* This is called at the end of the assembly, when the final value of
+ the label is known. We warn if this is a text symbol aligned at an
+ odd location. */
+
+void
+m68k_frob_symbol (sym)
+ symbolS *sym;
+{
+ if ((S_GET_VALUE (sym) & 1) != 0)
{
- case m68000:
- control_regs = m68000_control_regs;
- break;
- case m68010:
- control_regs = m68010_control_regs;
- break;
- case m68020:
- case m68030:
- control_regs = m68020_control_regs;
- break;
- case m68040:
- control_regs = m68040_control_regs;
- break;
- case m68060:
- control_regs = m68060_control_regs;
- break;
- default:
- abort ();
+ struct label_line *l;
+
+ for (l = labels; l != NULL; l = l->next)
+ {
+ if (l->label == sym)
+ {
+ if (l->text)
+ as_warn_where (l->file, l->line,
+ "text label `%s' aligned to odd boundary",
+ S_GET_NAME (sym));
+ break;
+ }
+ }
}
}
+\f
+/* This is called if we go in or out of MRI mode because of the .mri
+ pseudo-op. */
-#if 0
-#define notend(s) ((*s == ',' || *s == '}' || *s == '{' \
- || (*s == ':' && strchr("aAdD#", s[1]))) \
- ? 0 : 1)
+void
+m68k_mri_mode_change (on)
+ int on;
+{
+ if (on)
+ {
+ if (! flag_reg_prefix_optional)
+ {
+ flag_reg_prefix_optional = 1;
+#ifdef REGISTER_PREFIX
+ init_regtable ();
#endif
+ }
+ m68k_abspcadd = 1;
+ if (! m68k_rel32_from_cmdline)
+ m68k_rel32 = 0;
+ }
+ else
+ {
+ if (! reg_prefix_optional_seen)
+ {
+#ifdef REGISTER_PREFIX_OPTIONAL
+ flag_reg_prefix_optional = REGISTER_PREFIX_OPTIONAL;
+#else
+ flag_reg_prefix_optional = 0;
+#endif
+#ifdef REGISTER_PREFIX
+ init_regtable ();
+#endif
+ }
+ m68k_abspcadd = 0;
+ if (! m68k_rel32_from_cmdline)
+ m68k_rel32 = 1;
+ }
+}
/* Equal to MAX_PRECISION in atof-ieee.c */
#define MAX_LITTLENUMS 6
-/* Turn a string in input_line_pointer into a floating point constant of type
- type, and store the appropriate bytes in *litP. The number of LITTLENUMS
- emitted is stored in *sizeP . An error message is returned, or NULL on OK.
- */
+/* Turn a string in input_line_pointer into a floating point constant
+ of type type, and store the appropriate bytes in *litP. The number
+ of LITTLENUMS emitted is stored in *sizeP . An error message is
+ returned, or NULL on OK. */
+
char *
md_atof (type, litP, sizeP)
char type;
else
val &= 0x7fffffff;
+#ifdef OBJ_ELF
+ if (fixP->fx_addsy)
+ {
+ memset (buf, 0, fixP->fx_size);
+ fixP->fx_addnumber = val; /* Remember value for emit_reloc */
+ return;
+ }
+#endif
+
switch (fixP->fx_size)
{
+ /* The cast to offsetT below are necessary to make code correct for
+ machines where ints are smaller than offsetT */
case 1:
*buf++ = val;
upper_limit = 0x7f;
- lower_limit = -0x80;
+ lower_limit = - (offsetT) 0x80;
break;
case 2:
*buf++ = (val >> 8);
*buf++ = val;
upper_limit = 0x7fff;
- lower_limit = -0x8000;
+ lower_limit = - (offsetT) 0x8000;
break;
case 4:
*buf++ = (val >> 24);
*buf++ = (val >> 8);
*buf++ = val;
upper_limit = 0x7fffffff;
- lower_limit = -(offsetT)0x80000000;
+ lower_limit = - (offsetT) 0x7fffffff - 1; /* avoid constant overflow */
break;
default:
BAD_CASE (fixP->fx_size);
}
+ /* Fix up a negative reloc. */
+ if (fixP->fx_addsy == NULL && fixP->fx_subsy != NULL)
+ {
+ fixP->fx_addsy = fixP->fx_subsy;
+ fixP->fx_subsy = NULL;
+ fixP->fx_tcbit = 1;
+ }
+
/* For non-pc-relative values, it's conceivable we might get something
like "0xff" for a byte field. So extend the upper part of the range
to accept such numbers. We arbitrarily disallow "-0xff" or "0xff+0xff",
so that we can do any range checking at all. */
- if (!fixP->fx_pcrel)
+ if (! fixP->fx_pcrel && ! fixP->fx_signed)
upper_limit = upper_limit * 2 + 1;
if ((addressT) val > upper_limit
int
md_apply_fix (fixP, valp)
fixS *fixP;
- long *valp;
+ valueT *valp;
{
md_apply_fix_2 (fixP, (addressT) *valp);
return 1;
{
long disp;
long ext = 0;
+ fixS *fixP;
/* Address in object code of the displacement. */
register int object_address = fragP->fr_fix + fragP->fr_address;
disp = fragP->fr_symbol ? S_GET_VALUE (fragP->fr_symbol) : 0;
disp = (disp + fragP->fr_offset) - object_address;
+#ifdef BFD_ASSEMBLER
+ disp += fragP->fr_symbol->sy_frag->fr_address;
+#endif
+
switch (fragP->fr_subtype)
{
case TAB (BCC68000, BYTE):
if (cpu_of_arch (current_architecture) < m68020)
{
if (fragP->fr_opcode[0] == 0x61)
+ /* BSR */
{
fragP->fr_opcode[0] = 0x4E;
fragP->fr_opcode[1] = (char) 0xB9; /* JBSR with ABSL LONG offset */
- subseg_change (text_section, 0); /* @@ */
fix_new (fragP,
fragP->fr_fix,
fragP->fr_fix += 4;
ext = 0;
}
+ /* BRA */
else if (fragP->fr_opcode[0] == 0x60)
{
fragP->fr_opcode[0] = 0x4E;
fragP->fr_opcode[1] = (char) 0xF9; /* JMP with ABSL LONG offset */
- subseg_change (text_section, 0); /* @@ */
fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol,
fragP->fr_offset, 0, NO_RELOC);
fragP->fr_fix += 4;
*buffer_address++ = 0x4e; /* put in jmp long (0x4ef9) */
*buffer_address++ = (char) 0xf9;
fragP->fr_fix += 2; /* account for jmp instruction */
- subseg_change (text_section, 0);
fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol,
fragP->fr_offset, 0, NO_RELOC);
fragP->fr_fix += 4;
*buffer_address++ = (char) 0xf9;
fragP->fr_fix += 6; /* account for bra/jmp instructions */
- subseg_change (text_section, 0);
fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol,
fragP->fr_offset, 0, NO_RELOC);
fragP->fr_fix += 4;
/* The thing to do here is force it to ABSOLUTE LONG, since
PCREL is really trying to shorten an ABSOLUTE address anyway */
/* JF FOO This code has not been tested */
- subseg_change (text_section, 0);
fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
0, NO_RELOC);
if ((fragP->fr_opcode[1] & 0x3F) != 0x3A)
ext = 0;
break;
case TAB (PCLEA, SHORT):
- subseg_change (text_section, 0);
fix_new (fragP, (int) (fragP->fr_fix), 2, fragP->fr_symbol,
fragP->fr_offset, 1, NO_RELOC);
fragP->fr_opcode[1] &= ~0x3F;
- fragP->fr_opcode[1] |= 0x3A;
+ fragP->fr_opcode[1] |= 0x3A; /* 072 - mode 7.2 */
ext = 2;
break;
case TAB (PCLEA, LONG):
- subseg_change (text_section, 0);
- fix_new (fragP, (int) (fragP->fr_fix) + 2, 4, fragP->fr_symbol,
- fragP->fr_offset + 2, 1, NO_RELOC);
+ fixP = fix_new (fragP, (int) (fragP->fr_fix) + 2, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
+ fixP->fx_pcrel_adjust = 2;
+ /* Already set to mode 7.3; this indicates: PC indirect with
+ suppressed index, 32-bit displacement. */
*buffer_address++ = 0x01;
*buffer_address++ = 0x70;
fragP->fr_fix += 2;
ext = 4;
break;
+
+ case TAB (PCINDEX, BYTE):
+ disp += 2;
+ if (!issbyte (disp))
+ {
+ as_bad ("displacement doesn't fit in one byte");
+ disp = 0;
+ }
+ assert (fragP->fr_fix >= 2);
+ buffer_address[-2] &= ~1;
+ buffer_address[-1] = disp;
+ ext = 0;
+ break;
+ case TAB (PCINDEX, SHORT):
+ disp += 2;
+ assert (issword (disp));
+ assert (fragP->fr_fix >= 2);
+ buffer_address[-2] |= 0x1;
+ buffer_address[-1] = 0x20;
+ fixP = fix_new (fragP, (int) (fragP->fr_fix), 2, fragP->fr_symbol,
+ fragP->fr_offset, (fragP->fr_opcode[1] & 077) == 073,
+ NO_RELOC);
+ fixP->fx_pcrel_adjust = 2;
+ ext = 2;
+ break;
+ case TAB (PCINDEX, LONG):
+ disp += 2;
+ fixP = fix_new (fragP, (int) (fragP->fr_fix), 4, fragP->fr_symbol,
+ fragP->fr_offset, (fragP->fr_opcode[1] & 077) == 073,
+ NO_RELOC);
+ fixP->fx_pcrel_adjust = 2;
+ assert (fragP->fr_fix >= 2);
+ buffer_address[-2] |= 0x1;
+ buffer_address[-1] = 0x30;
+ ext = 4;
+ break;
}
if (ext)
#ifndef BFD_ASSEMBLER
void
-md_convert_frag (headers, fragP)
+md_convert_frag (headers, sec, fragP)
object_headers *headers;
+ segT sec;
fragS *fragP;
{
md_convert_frag_1 (fragP);
void
md_convert_frag (abfd, sec, fragP)
bfd *abfd;
- asection sec;
+ segT sec;
fragS *fragP;
{
md_convert_frag_1 (fragP);
{
fragP->fr_opcode[0] = 0x4E;
fragP->fr_opcode[1] = (char) 0xB9; /* JBSR with ABSL LONG offset */
- subseg_change (text_section, 0);
fix_new (fragP, fragP->fr_fix, 4,
fragP->fr_symbol, fragP->fr_offset, 0, NO_RELOC);
fragP->fr_fix += 4;
{
fragP->fr_opcode[0] = 0x4E;
fragP->fr_opcode[1] = (char) 0xF9; /* JMP with ABSL LONG offset */
- subseg_change (text_section, 0);
fix_new (fragP, fragP->fr_fix, 4,
fragP->fr_symbol, fragP->fr_offset, 0, NO_RELOC);
fragP->fr_fix += 4;
else
{ /* Symbol is still undefined. Make it simple */
fix_new (fragP, (int) (fragP->fr_fix), 4, fragP->fr_symbol,
- fragP->fr_offset + 4, 1, NO_RELOC);
+ fragP->fr_offset, 1, NO_RELOC);
fragP->fr_fix += 4;
fragP->fr_opcode[1] = (char) 0xff;
frag_wane (fragP);
}
else
{
- fragP->fr_subtype = TAB (FBRANCH, LONG);
- fragP->fr_var += 4;
+ fix_new (fragP, (int) fragP->fr_fix, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
+ fragP->fr_fix += 4;
+ fragP->fr_opcode[1] |= 0x40; /* Turn on LONG bit */
+ frag_wane (fragP);
}
break;
} /* TAB(FBRANCH,SZ_UNDEF) */
case TAB (PCREL, SZ_UNDEF):
{
- if (S_GET_SEGMENT (fragP->fr_symbol) == segment || flag_short_refs)
+ if (S_GET_SEGMENT (fragP->fr_symbol) == segment
+ || flag_short_refs
+ || cpu_of_arch (current_architecture) < m68020)
{
fragP->fr_subtype = TAB (PCREL, SHORT);
fragP->fr_var += 2;
buffer_address[0] = 0x4e; /* put in jmp long (0x4ef9) */
buffer_address[1] = (char) 0xf8;
fragP->fr_fix += 2; /* account for jmp instruction */
- subseg_change (text_section, 0);
fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol,
fragP->fr_offset, 0, NO_RELOC);
fragP->fr_fix += 2;
buffer_address[0] = 0x4e; /* put in jmp long (0x4ef9) */
buffer_address[1] = (char) 0xf9;
fragP->fr_fix += 2; /* account for jmp instruction */
- subseg_change (text_section, 0);
fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol,
fragP->fr_offset, 0, NO_RELOC);
fragP->fr_fix += 4;
buffer_address[4] = 0x4e; /* Put in Jump Word */
buffer_address[5] = (char) 0xf8;
fragP->fr_fix += 6; /* account for bra/jmp instruction */
- subseg_change (text_section, 0);
fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol,
fragP->fr_offset, 0, NO_RELOC);
fragP->fr_fix += 2;
buffer_address[4] = 0x4e; /* put in jmp long (0x4ef9) */
buffer_address[5] = (char) 0xf9;
fragP->fr_fix += 6; /* account for bra/jmp instruction */
- subseg_change (text_section, 0);
fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol,
fragP->fr_offset, 0, NO_RELOC);
fragP->fr_fix += 4;
case TAB (PCLEA, SZ_UNDEF):
{
- if ((S_GET_SEGMENT (fragP->fr_symbol)) == segment || flag_short_refs)
+ if ((S_GET_SEGMENT (fragP->fr_symbol)) == segment
+ || flag_short_refs
+ || cpu_of_arch (current_architecture) < m68020)
{
fragP->fr_subtype = TAB (PCLEA, SHORT);
fragP->fr_var += 2;
break;
} /* TAB(PCLEA,SZ_UNDEF) */
- default:
- break;
+ case TAB (PCINDEX, SZ_UNDEF):
+ if (S_GET_SEGMENT (fragP->fr_symbol) == segment
+ || cpu_of_arch (current_architecture) < m68020)
+ {
+ fragP->fr_subtype = TAB (PCINDEX, BYTE);
+ }
+ else
+ {
+ fragP->fr_subtype = TAB (PCINDEX, LONG);
+ fragP->fr_var += 4;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* now that SZ_UNDEF are taken care of, check others */
+ switch (fragP->fr_subtype)
+ {
+ case TAB (BCC68000, BYTE):
+ case TAB (ABRANCH, BYTE):
+ /* We can't do a short jump to the next instruction, so in that
+ case we force word mode. At this point S_GET_VALUE should
+ return the offset of the symbol within its frag. If the
+ symbol is at the start of a frag, and it is the next frag
+ with any data in it (usually this is just the next frag, but
+ assembler listings may introduce empty frags), we must use
+ word mode. */
+ if (fragP->fr_symbol && S_GET_VALUE (fragP->fr_symbol) == 0)
+ {
+ fragS *l;
+
+ for (l = fragP->fr_next;
+ l != fragP->fr_symbol->sy_frag;
+ l = l->fr_next)
+ if (l->fr_fix + l->fr_var != 0)
+ break;
+ if (l == fragP->fr_symbol->sy_frag)
+ {
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), SHORT);
+ fragP->fr_var += 2;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ return fragP->fr_var + fragP->fr_fix - old_fix;
+}
+
+#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
+/* the bit-field entries in the relocation_info struct plays hell
+ with the byte-order problems of cross-assembly. So as a hack,
+ I added this mach. dependent ri twiddler. Ugly, but it gets
+ you there. -KWK */
+/* on m68k: first 4 bytes are normal unsigned long, next three bytes
+ are symbolnum, most sig. byte first. Last byte is broken up with
+ bit 7 as pcrel, bits 6 & 5 as length, bit 4 as pcrel, and the lower
+ nibble as nuthin. (on Sun 3 at least) */
+/* Translate the internal relocation information into target-specific
+ format. */
+#ifdef comment
+void
+md_ri_to_chars (the_bytes, ri)
+ char *the_bytes;
+ struct reloc_info_generic *ri;
+{
+ /* this is easy */
+ md_number_to_chars (the_bytes, ri->r_address, 4);
+ /* now the fun stuff */
+ the_bytes[4] = (ri->r_symbolnum >> 16) & 0x0ff;
+ the_bytes[5] = (ri->r_symbolnum >> 8) & 0x0ff;
+ the_bytes[6] = ri->r_symbolnum & 0x0ff;
+ the_bytes[7] = (((ri->r_pcrel << 7) & 0x80) | ((ri->r_length << 5) & 0x60) |
+ ((ri->r_extern << 4) & 0x10));
+}
+
+#endif /* comment */
+
+#ifndef BFD_ASSEMBLER
+void
+tc_aout_fix_to_chars (where, fixP, segment_address_in_file)
+ char *where;
+ fixS *fixP;
+ relax_addressT segment_address_in_file;
+{
+ /*
+ * In: length of relocation (or of address) in chars: 1, 2 or 4.
+ * Out: GNU LD relocation length code: 0, 1, or 2.
+ */
+
+ static CONST unsigned char nbytes_r_length[] = {42, 0, 1, 42, 2};
+ long r_symbolnum;
+
+ know (fixP->fx_addsy != NULL);
+
+ md_number_to_chars (where,
+ fixP->fx_frag->fr_address + fixP->fx_where - segment_address_in_file,
+ 4);
+
+ r_symbolnum = (S_IS_DEFINED (fixP->fx_addsy)
+ ? S_GET_TYPE (fixP->fx_addsy)
+ : fixP->fx_addsy->sy_number);
+
+ where[4] = (r_symbolnum >> 16) & 0x0ff;
+ where[5] = (r_symbolnum >> 8) & 0x0ff;
+ where[6] = r_symbolnum & 0x0ff;
+ where[7] = (((fixP->fx_pcrel << 7) & 0x80) | ((nbytes_r_length[fixP->fx_size] << 5) & 0x60) |
+ (((!S_IS_DEFINED (fixP->fx_addsy)) << 4) & 0x10));
+}
+#endif
+
+#endif /* OBJ_AOUT or OBJ_BOUT */
+
+#ifndef WORKING_DOT_WORD
+CONST int md_short_jump_size = 4;
+CONST int md_long_jump_size = 6;
+
+void
+md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol)
+ char *ptr;
+ addressT from_addr, to_addr;
+ fragS *frag;
+ symbolS *to_symbol;
+{
+ valueT offset;
+
+ offset = to_addr - (from_addr + 2);
+
+ md_number_to_chars (ptr, (valueT) 0x6000, 2);
+ md_number_to_chars (ptr + 2, (valueT) offset, 2);
+}
+
+void
+md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol)
+ char *ptr;
+ addressT from_addr, to_addr;
+ fragS *frag;
+ symbolS *to_symbol;
+{
+ valueT offset;
+
+ if (cpu_of_arch (current_architecture) < m68020)
+ {
+ offset = to_addr - S_GET_VALUE (to_symbol);
+ md_number_to_chars (ptr, (valueT) 0x4EF9, 2);
+ md_number_to_chars (ptr + 2, (valueT) offset, 4);
+ fix_new (frag, (ptr + 2) - frag->fr_literal, 4, to_symbol, (offsetT) 0,
+ 0, NO_RELOC);
+ }
+ else
+ {
+ offset = to_addr - (from_addr + 2);
+ md_number_to_chars (ptr, (valueT) 0x60ff, 2);
+ md_number_to_chars (ptr + 2, (valueT) offset, 4);
+ }
+}
+
+#endif
+
+/* Different values of OK tell what its OK to return. Things that
+ aren't OK are an error (what a shock, no?)
+
+ 0: Everything is OK
+ 10: Absolute 1:8 only
+ 20: Absolute 0:7 only
+ 30: absolute 0:15 only
+ 40: Absolute 0:31 only
+ 50: absolute 0:127 only
+ 55: absolute -64:63 only
+ 60: absolute -128:127 only
+ 70: absolute 0:4095 only
+ 80: No bignums
+
+ */
+
+static int
+get_num (exp, ok)
+ struct m68k_exp *exp;
+ int ok;
+{
+ if (exp->exp.X_op == O_absent)
+ {
+ /* Do the same thing the VAX asm does */
+ op (exp) = O_constant;
+ adds (exp) = 0;
+ subs (exp) = 0;
+ offs (exp) = 0;
+ if (ok == 10)
+ {
+ as_warn ("expression out of range: defaulting to 1");
+ offs (exp) = 1;
+ }
+ }
+ else if (exp->exp.X_op == O_constant)
+ {
+ switch (ok)
+ {
+ case 10:
+ if (offs (exp) < 1 || offs (exp) > 8)
+ {
+ as_warn ("expression out of range: defaulting to 1");
+ offs (exp) = 1;
+ }
+ break;
+ case 20:
+ if (offs (exp) < 0 || offs (exp) > 7)
+ goto outrange;
+ break;
+ case 30:
+ if (offs (exp) < 0 || offs (exp) > 15)
+ goto outrange;
+ break;
+ case 40:
+ if (offs (exp) < 0 || offs (exp) > 32)
+ goto outrange;
+ break;
+ case 50:
+ if (offs (exp) < 0 || offs (exp) > 127)
+ goto outrange;
+ break;
+ case 55:
+ if (offs (exp) < -64 || offs (exp) > 63)
+ goto outrange;
+ break;
+ case 60:
+ if (offs (exp) < -128 || offs (exp) > 127)
+ goto outrange;
+ break;
+ case 70:
+ if (offs (exp) < 0 || offs (exp) > 4095)
+ {
+ outrange:
+ as_warn ("expression out of range: defaulting to 0");
+ offs (exp) = 0;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ else if (exp->exp.X_op == O_big)
+ {
+ if (offs (exp) <= 0 /* flonum */
+ && (ok == 80 /* no bignums */
+ || (ok > 10 /* small-int ranges including 0 ok */
+ /* If we have a flonum zero, a zero integer should
+ do as well (e.g., in moveq). */
+ && generic_floating_point_number.exponent == 0
+ && generic_floating_point_number.low[0] == 0)))
+ {
+ /* HACK! Turn it into a long */
+ LITTLENUM_TYPE words[6];
+
+ gen_to_words (words, 2, 8L); /* These numbers are magic! */
+ op (exp) = O_constant;
+ adds (exp) = 0;
+ subs (exp) = 0;
+ offs (exp) = words[1] | (words[0] << 16);
+ }
+ else if (ok != 0)
+ {
+ op (exp) = O_constant;
+ adds (exp) = 0;
+ subs (exp) = 0;
+ offs (exp) = (ok == 10) ? 1 : 0;
+ as_warn ("Can't deal with expression; defaulting to %ld",
+ offs (exp));
+ }
+ }
+ else
+ {
+ if (ok >= 10 && ok <= 70)
+ {
+ op (exp) = O_constant;
+ adds (exp) = 0;
+ subs (exp) = 0;
+ offs (exp) = (ok == 10) ? 1 : 0;
+ as_warn ("Can't deal with expression; defaulting to %ld",
+ offs (exp));
+ }
+ }
+
+ if (exp->size != SIZE_UNSPEC)
+ {
+ switch (exp->size)
+ {
+ case SIZE_UNSPEC:
+ case SIZE_LONG:
+ break;
+ case SIZE_BYTE:
+ if (!isbyte (offs (exp)))
+ as_warn ("expression doesn't fit in BYTE");
+ break;
+ case SIZE_WORD:
+ if (!isword (offs (exp)))
+ as_warn ("expression doesn't fit in WORD");
+ break;
+ }
+ }
+
+ return offs (exp);
+}
+
+/* These are the back-ends for the various machine dependent pseudo-ops. */
+void demand_empty_rest_of_line (); /* Hate those extra verbose names */
+
+static void
+s_data1 (ignore)
+ int ignore;
+{
+ subseg_set (data_section, 1);
+ demand_empty_rest_of_line ();
+}
+
+static void
+s_data2 (ignore)
+ int ignore;
+{
+ subseg_set (data_section, 2);
+ demand_empty_rest_of_line ();
+}
+
+static void
+s_bss (ignore)
+ int ignore;
+{
+ /* We don't support putting frags in the BSS segment, we fake it
+ by marking in_bss, then looking at s_skip for clues. */
+
+ subseg_set (bss_section, 0);
+ demand_empty_rest_of_line ();
+}
+
+static void
+s_even (ignore)
+ int ignore;
+{
+ register int temp;
+ register long temp_fill;
+
+ temp = 1; /* JF should be 2? */
+ temp_fill = get_absolute_expression ();
+ if (!need_pass_2) /* Never make frag if expect extra pass. */
+ frag_align (temp, (int) temp_fill);
+ demand_empty_rest_of_line ();
+ record_alignment (now_seg, temp);
+}
+
+static void
+s_proc (ignore)
+ int ignore;
+{
+ demand_empty_rest_of_line ();
+}
+\f
+/* Pseudo-ops handled for MRI compatibility. */
+
+/* This function returns non-zero if the argument is a conditional
+ pseudo-op. This is called when checking whether a pending
+ alignment is needed. */
+
+int
+m68k_conditional_pseudoop (pop)
+ pseudo_typeS *pop;
+{
+ return (pop->poc_handler == s_mri_if
+ || pop->poc_handler == s_mri_else);
+}
+
+/* Handle an MRI style chip specification. */
+
+static void
+mri_chip ()
+{
+ char *s;
+ char c;
+ int i;
+
+ s = input_line_pointer;
+ c = get_symbol_end ();
+ for (i = 0; i < n_archs; i++)
+ if (strcasecmp (s, archs[i].name) == 0)
+ break;
+ if (i >= n_archs)
+ {
+ as_bad ("%s: unrecognized processor name", s);
+ *input_line_pointer = c;
+ ignore_rest_of_line ();
+ return;
+ }
+ *input_line_pointer = c;
+
+ if (*input_line_pointer == '/')
+ current_architecture = 0;
+ else
+ current_architecture &= m68881 | m68851;
+ current_architecture |= archs[i].arch;
+
+ while (*input_line_pointer == '/')
+ {
+ ++input_line_pointer;
+ s = input_line_pointer;
+ c = get_symbol_end ();
+ if (strcmp (s, "68881") == 0)
+ current_architecture |= m68881;
+ else if (strcmp (s, "68851") == 0)
+ current_architecture |= m68851;
+ *input_line_pointer = c;
+ }
+
+ /* Update info about available control registers. */
+ select_control_regs ();
+}
+
+/* The MRI CHIP pseudo-op. */
+
+static void
+s_chip (ignore)
+ int ignore;
+{
+ char *stop = NULL;
+ char stopc;
+
+ if (flag_mri)
+ stop = mri_comment_field (&stopc);
+ mri_chip ();
+ if (flag_mri)
+ mri_comment_end (stop, stopc);
+ demand_empty_rest_of_line ();
+}
+
+/* The MRI FOPT pseudo-op. */
+
+static void
+s_fopt (ignore)
+ int ignore;
+{
+ SKIP_WHITESPACE ();
+
+ if (strncasecmp (input_line_pointer, "ID=", 3) == 0)
+ {
+ int temp;
+
+ input_line_pointer += 3;
+ temp = get_absolute_expression ();
+ if (temp < 0 || temp > 7)
+ as_bad ("bad coprocessor id");
+ else
+ m68k_float_copnum = COP0 + temp;
+ }
+ else
+ {
+ as_bad ("unrecognized fopt option");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ demand_empty_rest_of_line ();
+}
+
+/* The structure used to handle the MRI OPT pseudo-op. */
+
+struct opt_action
+{
+ /* The name of the option. */
+ const char *name;
+
+ /* If this is not NULL, just call this function. The first argument
+ is the ARG field of this structure, the second argument is
+ whether the option was negated. */
+ void (*pfn) PARAMS ((int arg, int on));
+
+ /* If this is not NULL, and the PFN field is NULL, set the variable
+ this points to. Set it to the ARG field if the option was not
+ negated, and the NOTARG field otherwise. */
+ int *pvar;
+
+ /* The value to pass to PFN or to assign to *PVAR. */
+ int arg;
+
+ /* The value to assign to *PVAR if the option is negated. If PFN is
+ NULL, and PVAR is not NULL, and ARG and NOTARG are the same, then
+ the option may not be negated. */
+ int notarg;
+};
+
+/* The table used to handle the MRI OPT pseudo-op. */
+
+static void skip_to_comma PARAMS ((int, int));
+static void opt_nest PARAMS ((int, int));
+static void opt_chip PARAMS ((int, int));
+static void opt_list PARAMS ((int, int));
+static void opt_list_symbols PARAMS ((int, int));
+
+static const struct opt_action opt_table[] =
+{
+ { "abspcadd", 0, &m68k_abspcadd, 1, 0 },
+
+ /* We do relaxing, so there is little use for these options. */
+ { "b", 0, 0, 0, 0 },
+ { "brs", 0, 0, 0, 0 },
+ { "brb", 0, 0, 0, 0 },
+ { "brl", 0, 0, 0, 0 },
+ { "brw", 0, 0, 0, 0 },
+
+ { "c", 0, 0, 0, 0 },
+ { "cex", 0, 0, 0, 0 },
+ { "case", 0, &symbols_case_sensitive, 1, 0 },
+ { "cl", 0, 0, 0, 0 },
+ { "cre", 0, 0, 0, 0 },
+ { "d", 0, &flag_keep_locals, 1, 0 },
+ { "e", 0, 0, 0, 0 },
+ { "f", 0, &flag_short_refs, 1, 0 },
+ { "frs", 0, &flag_short_refs, 1, 0 },
+ { "frl", 0, &flag_short_refs, 0, 1 },
+ { "g", 0, 0, 0, 0 },
+ { "i", 0, 0, 0, 0 },
+ { "m", 0, 0, 0, 0 },
+ { "mex", 0, 0, 0, 0 },
+ { "mc", 0, 0, 0, 0 },
+ { "md", 0, 0, 0, 0 },
+ { "nest", opt_nest, 0, 0, 0 },
+ { "next", skip_to_comma, 0, 0, 0 },
+ { "o", 0, 0, 0, 0 },
+ { "old", 0, 0, 0, 0 },
+ { "op", skip_to_comma, 0, 0, 0 },
+ { "pco", 0, 0, 0, 0 },
+ { "p", opt_chip, 0, 0, 0 },
+ { "pcr", 0, 0, 0, 0 },
+ { "pcs", 0, 0, 0, 0 },
+ { "r", 0, 0, 0, 0 },
+ { "quick", 0, &m68k_quick, 1, 0 },
+ { "rel32", 0, &m68k_rel32, 1, 0 },
+ { "s", opt_list, 0, 0, 0 },
+ { "t", opt_list_symbols, 0, 0, 0 },
+ { "w", 0, &flag_no_warnings, 0, 1 },
+ { "x", 0, 0, 0, 0 }
+};
+
+#define OPTCOUNT (sizeof opt_table / sizeof opt_table[0])
+
+/* The MRI OPT pseudo-op. */
+
+static void
+s_opt (ignore)
+ int ignore;
+{
+ do
+ {
+ int t;
+ char *s;
+ char c;
+ int i;
+ const struct opt_action *o;
+
+ SKIP_WHITESPACE ();
+
+ t = 1;
+ if (*input_line_pointer == '-')
+ {
+ ++input_line_pointer;
+ t = 0;
+ }
+ else if (strncasecmp (input_line_pointer, "NO", 2) == 0)
+ {
+ input_line_pointer += 2;
+ t = 0;
+ }
+
+ s = input_line_pointer;
+ c = get_symbol_end ();
+
+ for (i = 0, o = opt_table; i < OPTCOUNT; i++, o++)
+ {
+ if (strcasecmp (s, o->name) == 0)
+ {
+ if (o->pfn)
+ {
+ /* Restore input_line_pointer now in case the option
+ takes arguments. */
+ *input_line_pointer = c;
+ (*o->pfn) (o->arg, t);
+ }
+ else if (o->pvar != NULL)
+ {
+ if (! t && o->arg == o->notarg)
+ as_bad ("option `%s' may not be negated", s);
+ *input_line_pointer = c;
+ *o->pvar = t ? o->arg : o->notarg;
+ }
+ else
+ *input_line_pointer = c;
+ break;
+ }
+ }
+ if (i >= OPTCOUNT)
+ {
+ as_bad ("option `%s' not recognized", s);
+ *input_line_pointer = c;
+ }
+ }
+ while (*input_line_pointer++ == ',');
+
+ /* Move back to terminating character. */
+ --input_line_pointer;
+ demand_empty_rest_of_line ();
+}
+
+/* Skip ahead to a comma. This is used for OPT options which we do
+ not suppor tand which take arguments. */
+
+static void
+skip_to_comma (arg, on)
+ int arg;
+ int on;
+{
+ while (*input_line_pointer != ','
+ && ! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+}
+
+/* Handle the OPT NEST=depth option. */
+
+static void
+opt_nest (arg, on)
+ int arg;
+ int on;
+{
+ if (*input_line_pointer != '=')
+ {
+ as_bad ("bad format of OPT NEST=depth");
+ return;
+ }
+
+ ++input_line_pointer;
+ max_macro_nest = get_absolute_expression ();
+}
+
+/* Handle the OPT P=chip option. */
+
+static void
+opt_chip (arg, on)
+ int arg;
+ int on;
+{
+ if (*input_line_pointer != '=')
+ {
+ /* This is just OPT P, which we do not support. */
+ return;
+ }
+
+ ++input_line_pointer;
+ mri_chip ();
+}
+
+/* Handle the OPT S option. */
+
+static void
+opt_list (arg, on)
+ int arg;
+ int on;
+{
+ listing_list (on);
+}
+
+/* Handle the OPT T option. */
+
+static void
+opt_list_symbols (arg, on)
+ int arg;
+ int on;
+{
+ if (on)
+ listing |= LISTING_SYMBOLS;
+ else
+ listing &=~ LISTING_SYMBOLS;
+}
+
+/* Handle the MRI REG pseudo-op. */
+
+static void
+s_reg (ignore)
+ int ignore;
+{
+ char *s;
+ int c;
+ struct m68k_op rop;
+ unsigned long mask;
+ char *stop = NULL;
+ char stopc;
+
+ if (line_label == NULL)
+ {
+ as_bad ("missing label");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ if (flag_mri)
+ stop = mri_comment_field (&stopc);
+
+ SKIP_WHITESPACE ();
+
+ s = input_line_pointer;
+ while (isalnum ((unsigned char) *input_line_pointer)
+#ifdef REGISTER_PREFIX
+ || *input_line_pointer == REGISTER_PREFIX
+#endif
+ || *input_line_pointer == '/'
+ || *input_line_pointer == '-')
+ ++input_line_pointer;
+ c = *input_line_pointer;
+ *input_line_pointer = '\0';
+
+ if (m68k_ip_op (s, &rop) != 0)
+ {
+ if (rop.error == NULL)
+ as_bad ("bad register list");
+ else
+ as_bad ("bad register list: %s", rop.error);
+ *input_line_pointer = c;
+ ignore_rest_of_line ();
+ return;
+ }
+
+ *input_line_pointer = c;
+
+ if (rop.mode == REGLST)
+ mask = rop.mask;
+ else if (rop.mode == DREG)
+ mask = 1 << (rop.reg - DATA0);
+ else if (rop.mode == AREG)
+ mask = 1 << (rop.reg - ADDR0 + 8);
+ else if (rop.mode == FPREG)
+ mask = 1 << (rop.reg - FP0 + 16);
+ else if (rop.mode == CONTROL
+ && rop.reg == FPI)
+ mask = 1 << 24;
+ else if (rop.mode == CONTROL
+ && rop.reg == FPS)
+ mask = 1 << 25;
+ else if (rop.mode == CONTROL
+ && rop.reg == FPC)
+ mask = 1 << 26;
+ else
+ {
+ as_bad ("bad register list");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ S_SET_SEGMENT (line_label, absolute_section);
+ S_SET_VALUE (line_label, mask);
+ line_label->sy_frag = &zero_address_frag;
+
+ if (flag_mri)
+ mri_comment_end (stop, stopc);
+
+ demand_empty_rest_of_line ();
+}
+
+/* This structure is used for the MRI SAVE and RESTORE pseudo-ops. */
+
+struct save_opts
+{
+ struct save_opts *next;
+ int abspcadd;
+ int symbols_case_sensitive;
+ int keep_locals;
+ int short_refs;
+ int architecture;
+ int quick;
+ int rel32;
+ int listing;
+ int no_warnings;
+ /* FIXME: We don't save OPT S. */
+};
+
+/* This variable holds the stack of saved options. */
+
+static struct save_opts *save_stack;
+
+/* The MRI SAVE pseudo-op. */
+
+static void
+s_save (ignore)
+ int ignore;
+{
+ struct save_opts *s;
+
+ s = (struct save_opts *) xmalloc (sizeof (struct save_opts));
+ s->abspcadd = m68k_abspcadd;
+ s->symbols_case_sensitive = symbols_case_sensitive;
+ s->keep_locals = flag_keep_locals;
+ s->short_refs = flag_short_refs;
+ s->architecture = current_architecture;
+ s->quick = m68k_quick;
+ s->rel32 = m68k_rel32;
+ s->listing = listing;
+ s->no_warnings = flag_no_warnings;
+
+ s->next = save_stack;
+ save_stack = s;
+
+ demand_empty_rest_of_line ();
+}
+
+/* The MRI RESTORE pseudo-op. */
+
+static void
+s_restore (ignore)
+ int ignore;
+{
+ struct save_opts *s;
+
+ if (save_stack == NULL)
+ {
+ as_bad ("restore without save");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ s = save_stack;
+ save_stack = s->next;
+
+ m68k_abspcadd = s->abspcadd;
+ symbols_case_sensitive = s->symbols_case_sensitive;
+ flag_keep_locals = s->keep_locals;
+ flag_short_refs = s->short_refs;
+ current_architecture = s->architecture;
+ m68k_quick = s->quick;
+ m68k_rel32 = s->rel32;
+ listing = s->listing;
+ flag_no_warnings = s->no_warnings;
+
+ free (s);
+
+ demand_empty_rest_of_line ();
+}
+
+/* Types of MRI structured control directives. */
+
+enum mri_control_type
+{
+ mri_for,
+ mri_if,
+ mri_repeat,
+ mri_while
+};
+
+/* This structure is used to stack the MRI structured control
+ directives. */
+
+struct mri_control_info
+{
+ /* The directive within which this one is enclosed. */
+ struct mri_control_info *outer;
+
+ /* The type of directive. */
+ enum mri_control_type type;
+
+ /* Whether an ELSE has been in an IF. */
+ int else_seen;
+
+ /* The add or sub statement at the end of a FOR. */
+ char *incr;
+
+ /* The label of the top of a FOR or REPEAT loop. */
+ char *top;
+
+ /* The label to jump to for the next iteration, or the else
+ expression of a conditional. */
+ char *next;
+
+ /* The label to jump to to break out of the loop, or the label past
+ the end of a conditional. */
+ char *bottom;
+};
+
+/* The stack of MRI structured control directives. */
+
+static struct mri_control_info *mri_control_stack;
+
+/* The current MRI structured control directive index number, used to
+ generate label names. */
+
+static int mri_control_index;
+
+/* Some function prototypes. */
+
+static char *mri_control_label PARAMS ((void));
+static struct mri_control_info *push_mri_control
+ PARAMS ((enum mri_control_type));
+static void pop_mri_control PARAMS ((void));
+static int parse_mri_condition PARAMS ((int *));
+static int parse_mri_control_operand
+ PARAMS ((int *, char **, char **, char **, char **));
+static int swap_mri_condition PARAMS ((int));
+static int reverse_mri_condition PARAMS ((int));
+static void build_mri_control_operand
+ PARAMS ((int, int, char *, char *, char *, char *, const char *,
+ const char *, int));
+static void parse_mri_control_expression
+ PARAMS ((char *, int, const char *, const char *, int));
+
+/* Generate a new MRI label structured control directive label name. */
+
+static char *
+mri_control_label ()
+{
+ char *n;
+
+ n = (char *) xmalloc (20);
+ sprintf (n, "%smc%d", FAKE_LABEL_NAME, mri_control_index);
+ ++mri_control_index;
+ return n;
+}
+
+/* Create a new MRI structured control directive. */
+
+static struct mri_control_info *
+push_mri_control (type)
+ enum mri_control_type type;
+{
+ struct mri_control_info *n;
+
+ n = (struct mri_control_info *) xmalloc (sizeof (struct mri_control_info));
+
+ n->type = type;
+ n->else_seen = 0;
+ if (type == mri_if || type == mri_while)
+ n->top = NULL;
+ else
+ n->top = mri_control_label ();
+ n->next = mri_control_label ();
+ n->bottom = mri_control_label ();
+
+ n->outer = mri_control_stack;
+ mri_control_stack = n;
+
+ return n;
+}
+
+/* Pop off the stack of MRI structured control directives. */
+
+static void
+pop_mri_control ()
+{
+ struct mri_control_info *n;
+
+ n = mri_control_stack;
+ mri_control_stack = n->outer;
+ if (n->top != NULL)
+ free (n->top);
+ free (n->next);
+ free (n->bottom);
+ free (n);
+}
+
+/* Recognize a condition code in an MRI structured control expression. */
+
+static int
+parse_mri_condition (pcc)
+ int *pcc;
+{
+ char c1, c2;
+
+ know (*input_line_pointer == '<');
+
+ ++input_line_pointer;
+ c1 = *input_line_pointer++;
+ c2 = *input_line_pointer++;
+
+ if (*input_line_pointer != '>')
+ {
+ as_bad ("syntax error in structured control directive");
+ return 0;
+ }
+
+ ++input_line_pointer;
+ SKIP_WHITESPACE ();
+
+ if (isupper (c1))
+ c1 = tolower (c1);
+ if (isupper (c2))
+ c2 = tolower (c2);
+
+ *pcc = (c1 << 8) | c2;
+
+ return 1;
+}
+
+/* Parse a single operand in an MRI structured control expression. */
+
+static int
+parse_mri_control_operand (pcc, leftstart, leftstop, rightstart, rightstop)
+ int *pcc;
+ char **leftstart;
+ char **leftstop;
+ char **rightstart;
+ char **rightstop;
+{
+ char *s;
+
+ SKIP_WHITESPACE ();
+
+ *pcc = -1;
+ *leftstart = NULL;
+ *leftstop = NULL;
+ *rightstart = NULL;
+ *rightstop = NULL;
+
+ if (*input_line_pointer == '<')
+ {
+ /* It's just a condition code. */
+ return parse_mri_condition (pcc);
+ }
+
+ /* Look ahead for the condition code. */
+ for (s = input_line_pointer; *s != '\0'; ++s)
+ {
+ if (*s == '<' && s[1] != '\0' && s[2] != '\0' && s[3] == '>')
+ break;
+ }
+ if (*s == '\0')
+ {
+ as_bad ("missing condition code in structured control directive");
+ return 0;
+ }
+
+ *leftstart = input_line_pointer;
+ *leftstop = s;
+ if (*leftstop > *leftstart
+ && ((*leftstop)[-1] == ' ' || (*leftstop)[-1] == '\t'))
+ --*leftstop;
+
+ input_line_pointer = s;
+ if (! parse_mri_condition (pcc))
+ return 0;
+
+ /* Look ahead for AND or OR or end of line. */
+ for (s = input_line_pointer; *s != '\0'; ++s)
+ {
+ if ((strncasecmp (s, "AND", 3) == 0
+ && (s[3] == '.' || ! is_part_of_name (s[3])))
+ || (strncasecmp (s, "OR", 2) == 0
+ && (s[2] == '.' || ! is_part_of_name (s[2]))))
+ break;
+ }
+
+ *rightstart = input_line_pointer;
+ *rightstop = s;
+ if (*rightstop > *rightstart
+ && ((*rightstop)[-1] == ' ' || (*rightstop)[-1] == '\t'))
+ --*rightstop;
+
+ input_line_pointer = s;
+
+ return 1;
+}
+
+#define MCC(b1, b2) (((b1) << 8) | (b2))
+
+/* Swap the sense of a condition. This changes the condition so that
+ it generates the same result when the operands are swapped. */
+
+static int
+swap_mri_condition (cc)
+ int cc;
+{
+ switch (cc)
+ {
+ case MCC ('h', 'i'): return MCC ('c', 's');
+ case MCC ('l', 's'): return MCC ('c', 'c');
+ case MCC ('c', 'c'): return MCC ('l', 's');
+ case MCC ('c', 's'): return MCC ('h', 'i');
+ case MCC ('p', 'l'): return MCC ('m', 'i');
+ case MCC ('m', 'i'): return MCC ('p', 'l');
+ case MCC ('g', 'e'): return MCC ('l', 'e');
+ case MCC ('l', 't'): return MCC ('g', 't');
+ case MCC ('g', 't'): return MCC ('l', 't');
+ case MCC ('l', 'e'): return MCC ('g', 'e');
+ }
+ return cc;
+}
+
+/* Reverse the sense of a condition. */
+
+static int
+reverse_mri_condition (cc)
+ int cc;
+{
+ switch (cc)
+ {
+ case MCC ('h', 'i'): return MCC ('l', 's');
+ case MCC ('l', 's'): return MCC ('h', 'i');
+ case MCC ('c', 'c'): return MCC ('c', 's');
+ case MCC ('c', 's'): return MCC ('c', 'c');
+ case MCC ('n', 'e'): return MCC ('e', 'q');
+ case MCC ('e', 'q'): return MCC ('n', 'e');
+ case MCC ('v', 'c'): return MCC ('v', 's');
+ case MCC ('v', 's'): return MCC ('v', 'c');
+ case MCC ('p', 'l'): return MCC ('m', 'i');
+ case MCC ('m', 'i'): return MCC ('p', 'l');
+ case MCC ('g', 'e'): return MCC ('l', 't');
+ case MCC ('l', 't'): return MCC ('g', 'e');
+ case MCC ('g', 't'): return MCC ('l', 'e');
+ case MCC ('l', 'e'): return MCC ('g', 't');
+ }
+ return cc;
+}
+
+/* Build an MRI structured control expression. This generates test
+ and branch instructions. It goes to TRUELAB if the condition is
+ true, and to FALSELAB if the condition is false. Exactly one of
+ TRUELAB and FALSELAB will be NULL, meaning to fall through. QUAL
+ is the size qualifier for the expression. EXTENT is the size to
+ use for the branch. */
- } /* switch on subtype looking for SZ_UNDEF's. */
+static void
+build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, truelab, falselab, extent)
+ int qual;
+ int cc;
+ char *leftstart;
+ char *leftstop;
+ char *rightstart;
+ char *rightstop;
+ const char *truelab;
+ const char *falselab;
+ int extent;
+{
+ char *buf;
+ char *s;
- /* now that SZ_UNDEF are taken care of, check others */
- switch (fragP->fr_subtype)
+ if (leftstart != NULL)
{
- case TAB (BCC68000, BYTE):
- case TAB (ABRANCH, BYTE):
- /* We can't do a short jump to the next instruction,
- so we force word mode. */
- if (fragP->fr_symbol && S_GET_VALUE (fragP->fr_symbol) == 0 &&
- fragP->fr_symbol->sy_frag == fragP->fr_next)
+ struct m68k_op leftop, rightop;
+ char c;
+
+ /* Swap the compare operands, if necessary, to produce a legal
+ m68k compare instruction. Comparing a register operand with
+ a non-register operand requires the register to be on the
+ right (cmp, cmpa). Comparing an immediate value with
+ anything requires the immediate value to be on the left
+ (cmpi). */
+
+ c = *leftstop;
+ *leftstop = '\0';
+ (void) m68k_ip_op (leftstart, &leftop);
+ *leftstop = c;
+
+ c = *rightstop;
+ *rightstop = '\0';
+ (void) m68k_ip_op (rightstart, &rightop);
+ *rightstop = c;
+
+ if (rightop.mode == IMMED
+ || ((leftop.mode == DREG || leftop.mode == AREG)
+ && (rightop.mode != DREG && rightop.mode != AREG)))
{
- fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), SHORT);
- fragP->fr_var += 2;
+ char *temp;
+
+ cc = swap_mri_condition (cc);
+ temp = leftstart;
+ leftstart = rightstart;
+ rightstart = temp;
+ temp = leftstop;
+ leftstop = rightstop;
+ rightstop = temp;
}
- break;
- default:
- break;
}
- return fragP->fr_var + fragP->fr_fix - old_fix;
-}
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
-/* the bit-field entries in the relocation_info struct plays hell
- with the byte-order problems of cross-assembly. So as a hack,
- I added this mach. dependent ri twiddler. Ugly, but it gets
- you there. -KWK */
-/* on m68k: first 4 bytes are normal unsigned long, next three bytes
- are symbolnum, most sig. byte first. Last byte is broken up with
- bit 7 as pcrel, bits 6 & 5 as length, bit 4 as pcrel, and the lower
- nibble as nuthin. (on Sun 3 at least) */
-/* Translate the internal relocation information into target-specific
- format. */
-#ifdef comment
-void
-md_ri_to_chars (the_bytes, ri)
- char *the_bytes;
- struct reloc_info_generic *ri;
-{
- /* this is easy */
- md_number_to_chars (the_bytes, ri->r_address, 4);
- /* now the fun stuff */
- the_bytes[4] = (ri->r_symbolnum >> 16) & 0x0ff;
- the_bytes[5] = (ri->r_symbolnum >> 8) & 0x0ff;
- the_bytes[6] = ri->r_symbolnum & 0x0ff;
- the_bytes[7] = (((ri->r_pcrel << 7) & 0x80) | ((ri->r_length << 5) & 0x60) |
- ((ri->r_extern << 4) & 0x10));
+ if (truelab == NULL)
+ {
+ cc = reverse_mri_condition (cc);
+ truelab = falselab;
+ }
+
+ if (leftstart != NULL)
+ {
+ buf = (char *) xmalloc (20
+ + (leftstop - leftstart)
+ + (rightstop - rightstart));
+ s = buf;
+ *s++ = 'c';
+ *s++ = 'm';
+ *s++ = 'p';
+ if (qual != '\0')
+ *s++ = qual;
+ *s++ = ' ';
+ memcpy (s, leftstart, leftstop - leftstart);
+ s += leftstop - leftstart;
+ *s++ = ',';
+ memcpy (s, rightstart, rightstop - rightstart);
+ s += rightstop - rightstart;
+ *s = '\0';
+ md_assemble (buf);
+ free (buf);
+ }
+
+ buf = (char *) xmalloc (20 + strlen (truelab));
+ s = buf;
+ *s++ = 'b';
+ *s++ = cc >> 8;
+ *s++ = cc & 0xff;
+ if (extent != '\0')
+ *s++ = extent;
+ *s++ = ' ';
+ strcpy (s, truelab);
+ md_assemble (buf);
+ free (buf);
}
-#endif /* comment */
+/* Parse an MRI structured control expression. This generates test
+ and branch instructions. STOP is where the expression ends. It
+ goes to TRUELAB if the condition is true, and to FALSELAB if the
+ condition is false. Exactly one of TRUELAB and FALSELAB will be
+ NULL, meaning to fall through. QUAL is the size qualifier for the
+ expression. EXTENT is the size to use for the branch. */
-#ifndef BFD_ASSEMBLER
-void
-tc_aout_fix_to_chars (where, fixP, segment_address_in_file)
- char *where;
- fixS *fixP;
- relax_addressT segment_address_in_file;
+static void
+parse_mri_control_expression (stop, qual, truelab, falselab, extent)
+ char *stop;
+ int qual;
+ const char *truelab;
+ const char *falselab;
+ int extent;
{
- /*
- * In: length of relocation (or of address) in chars: 1, 2 or 4.
- * Out: GNU LD relocation length code: 0, 1, or 2.
- */
+ int c;
+ int cc;
+ char *leftstart;
+ char *leftstop;
+ char *rightstart;
+ char *rightstop;
+
+ c = *stop;
+ *stop = '\0';
+
+ if (! parse_mri_control_operand (&cc, &leftstart, &leftstop,
+ &rightstart, &rightstop))
+ {
+ *stop = c;
+ return;
+ }
- static CONST unsigned char nbytes_r_length[] = {42, 0, 1, 42, 2};
- long r_symbolnum;
+ if (strncasecmp (input_line_pointer, "AND", 3) == 0)
+ {
+ const char *flab;
- know (fixP->fx_addsy != NULL);
+ if (falselab != NULL)
+ flab = falselab;
+ else
+ flab = mri_control_label ();
- md_number_to_chars (where,
- fixP->fx_frag->fr_address + fixP->fx_where - segment_address_in_file,
- 4);
+ build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, (const char *) NULL, flab, extent);
- r_symbolnum = (S_IS_DEFINED (fixP->fx_addsy)
- ? S_GET_TYPE (fixP->fx_addsy)
- : fixP->fx_addsy->sy_number);
+ input_line_pointer += 3;
+ if (*input_line_pointer != '.'
+ || input_line_pointer[1] == '\0')
+ qual = '\0';
+ else
+ {
+ qual = input_line_pointer[1];
+ input_line_pointer += 2;
+ }
- where[4] = (r_symbolnum >> 16) & 0x0ff;
- where[5] = (r_symbolnum >> 8) & 0x0ff;
- where[6] = r_symbolnum & 0x0ff;
- where[7] = (((fixP->fx_pcrel << 7) & 0x80) | ((nbytes_r_length[fixP->fx_size] << 5) & 0x60) |
- (((!S_IS_DEFINED (fixP->fx_addsy)) << 4) & 0x10));
-}
-#endif
+ if (! parse_mri_control_operand (&cc, &leftstart, &leftstop,
+ &rightstart, &rightstop))
+ {
+ *stop = c;
+ return;
+ }
-#endif /* OBJ_AOUT or OBJ_BOUT */
+ build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, truelab, falselab, extent);
-#ifndef WORKING_DOT_WORD
-CONST int md_short_jump_size = 4;
-CONST int md_long_jump_size = 6;
+ if (falselab == NULL)
+ colon (flab);
+ }
+ else if (strncasecmp (input_line_pointer, "OR", 2) == 0)
+ {
+ const char *tlab;
-void
-md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- addressT from_addr, to_addr;
- fragS *frag;
- symbolS *to_symbol;
-{
- valueT offset;
+ if (truelab != NULL)
+ tlab = truelab;
+ else
+ tlab = mri_control_label ();
- offset = to_addr - (from_addr + 2);
+ build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, tlab, (const char *) NULL, extent);
- md_number_to_chars (ptr, (valueT) 0x6000, 2);
- md_number_to_chars (ptr + 2, (valueT) offset, 2);
+ input_line_pointer += 2;
+ if (*input_line_pointer != '.'
+ || input_line_pointer[1] == '\0')
+ qual = '\0';
+ else
+ {
+ qual = input_line_pointer[1];
+ input_line_pointer += 2;
+ }
+
+ if (! parse_mri_control_operand (&cc, &leftstart, &leftstop,
+ &rightstart, &rightstop))
+ {
+ *stop = c;
+ return;
+ }
+
+ build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, truelab, falselab, extent);
+
+ if (truelab == NULL)
+ colon (tlab);
+ }
+ else
+ {
+ build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, truelab, falselab, extent);
+ }
+
+ *stop = c;
+ if (input_line_pointer != stop)
+ as_bad ("syntax error in structured control directive");
}
-void
-md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- addressT from_addr, to_addr;
- fragS *frag;
- symbolS *to_symbol;
+/* Handle the MRI IF pseudo-op. This may be a structured control
+ directive, or it may be a regular assembler conditional, depending
+ on its operands. */
+
+static void
+s_mri_if (qual)
+ int qual;
{
- valueT offset;
+ char *s;
+ int c;
+ struct mri_control_info *n;
+
+ /* A structured control directive must end with THEN with an
+ optional qualifier. */
+ s = input_line_pointer;
+ while (! is_end_of_line[(unsigned char) *s]
+ && (! flag_mri || *s != '*'))
+ ++s;
+ --s;
+ while (s > input_line_pointer && (*s == ' ' || *s == '\t'))
+ --s;
+
+ if (s - input_line_pointer > 1
+ && s[-1] == '.')
+ s -= 2;
+
+ if (s - input_line_pointer < 3
+ || strncasecmp (s - 3, "THEN", 4) != 0)
+ {
+ if (qual != '\0')
+ {
+ as_bad ("missing then");
+ ignore_rest_of_line ();
+ return;
+ }
- if (cpu_of_arch (current_architecture) < m68020)
+ /* It's a conditional. */
+ s_if (O_ne);
+ return;
+ }
+
+ /* Since this might be a conditional if, this pseudo-op will be
+ called even if we are supported to be ignoring input. Double
+ check now. Clobber *input_line_pointer so that ignore_input
+ thinks that this is not a special pseudo-op. */
+ c = *input_line_pointer;
+ *input_line_pointer = 0;
+ if (ignore_input ())
{
- offset = to_addr - S_GET_VALUE (to_symbol);
- md_number_to_chars (ptr, (valueT) 0x4EF9, 2);
- md_number_to_chars (ptr + 2, (valueT) offset, 4);
- fix_new (frag, (ptr + 2) - frag->fr_literal, 4, to_symbol, (offsetT) 0,
- 0, NO_RELOC);
+ *input_line_pointer = c;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ demand_empty_rest_of_line ();
+ return;
}
+ *input_line_pointer = c;
+
+ n = push_mri_control (mri_if);
+
+ parse_mri_control_expression (s - 3, qual, (const char *) NULL,
+ n->next, s[1] == '.' ? s[2] : '\0');
+
+ if (s[1] == '.')
+ input_line_pointer = s + 3;
else
+ input_line_pointer = s + 1;
+
+ if (flag_mri)
{
- offset = to_addr - (from_addr + 2);
- md_number_to_chars (ptr, (valueT) 0x60ff, 2);
- md_number_to_chars (ptr + 2, (valueT) offset, 4);
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
}
+
+ demand_empty_rest_of_line ();
}
-#endif
-/* Different values of OK tell what its OK to return. Things that aren't OK are an error (what a shock, no?)
+/* Handle the MRI else pseudo-op. If we are currently doing an MRI
+ structured IF, associate the ELSE with the IF. Otherwise, assume
+ it is a conditional else. */
- 0: Everything is OK
- 10: Absolute 1:8 only
- 20: Absolute 0:7 only
- 30: absolute 0:15 only
- 40: Absolute 0:31 only
- 50: absolute 0:127 only
- 55: absolute -64:63 only
- 60: absolute -128:127 only
- 70: absolute 0:4095 only
- 80: No bignums
+static void
+s_mri_else (qual)
+ int qual;
+{
+ int c;
+ char *buf;
+ char q[2];
+
+ if (qual == '\0'
+ && (mri_control_stack == NULL
+ || mri_control_stack->type != mri_if
+ || mri_control_stack->else_seen))
+ {
+ s_else (0);
+ return;
+ }
- */
+ c = *input_line_pointer;
+ *input_line_pointer = 0;
+ if (ignore_input ())
+ {
+ *input_line_pointer = c;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ demand_empty_rest_of_line ();
+ return;
+ }
+ *input_line_pointer = c;
-static int
-get_num (exp, ok)
- struct m68k_exp *exp;
- int ok;
+ if (mri_control_stack == NULL
+ || mri_control_stack->type != mri_if
+ || mri_control_stack->else_seen)
+ {
+ as_bad ("else without matching if");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ mri_control_stack->else_seen = 1;
+
+ buf = (char *) xmalloc (20 + strlen (mri_control_stack->bottom));
+ q[0] = qual;
+ q[1] = '\0';
+ sprintf (buf, "bra%s %s", q, mri_control_stack->bottom);
+ md_assemble (buf);
+ free (buf);
+
+ colon (mri_control_stack->next);
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
+ demand_empty_rest_of_line ();
+}
+
+/* Handle the MRI ENDI pseudo-op. */
+
+static void
+s_mri_endi (ignore)
+ int ignore;
{
-#ifdef TEST2
- long l = 0;
+ if (mri_control_stack == NULL
+ || mri_control_stack->type != mri_if)
+ {
+ as_bad ("endi without matching if");
+ ignore_rest_of_line ();
+ return;
+ }
- if (!exp->e_beg)
- return 0;
- if (*exp->e_beg == '0')
+ /* ignore_input will not return true for ENDI, so we don't need to
+ worry about checking it again here. */
+
+ if (! mri_control_stack->else_seen)
+ colon (mri_control_stack->next);
+ colon (mri_control_stack->bottom);
+
+ pop_mri_control ();
+
+ if (flag_mri)
{
- if (exp->e_beg[1] == 'x')
- sscanf (exp->e_beg + 2, "%x", &l);
- else
- sscanf (exp->e_beg + 1, "%O", &l);
- return l;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
}
- return atol (exp->e_beg);
-#else
- char *save_in;
- char c_save;
- segT section;
- if (!exp)
+ demand_empty_rest_of_line ();
+}
+
+/* Handle the MRI BREAK pseudo-op. */
+
+static void
+s_mri_break (extent)
+ int extent;
+{
+ struct mri_control_info *n;
+ char *buf;
+ char ex[2];
+
+ n = mri_control_stack;
+ while (n != NULL
+ && n->type != mri_for
+ && n->type != mri_repeat
+ && n->type != mri_while)
+ n = n->outer;
+ if (n == NULL)
{
- /* Can't do anything */
- return 0;
+ as_bad ("break outside of structured loop");
+ ignore_rest_of_line ();
+ return;
}
- if (!exp->e_beg || !exp->e_end)
+
+ buf = (char *) xmalloc (20 + strlen (n->bottom));
+ ex[0] = extent;
+ ex[1] = '\0';
+ sprintf (buf, "bra%s %s", ex, n->bottom);
+ md_assemble (buf);
+ free (buf);
+
+ if (flag_mri)
{
- seg (exp) = absolute_section;
- adds (exp) = 0;
- subs (exp) = 0;
- offs (exp) = (ok == 10) ? 1 : 0;
- as_warn ("Null expression defaults to %ld", offs (exp));
- return 0;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
+ demand_empty_rest_of_line ();
+}
+
+/* Handle the MRI NEXT pseudo-op. */
+
+static void
+s_mri_next (extent)
+ int extent;
+{
+ struct mri_control_info *n;
+ char *buf;
+ char ex[2];
+
+ n = mri_control_stack;
+ while (n != NULL
+ && n->type != mri_for
+ && n->type != mri_repeat
+ && n->type != mri_while)
+ n = n->outer;
+ if (n == NULL)
+ {
+ as_bad ("next outside of structured loop");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ buf = (char *) xmalloc (20 + strlen (n->next));
+ ex[0] = extent;
+ ex[1] = '\0';
+ sprintf (buf, "bra%s %s", ex, n->next);
+ md_assemble (buf);
+ free (buf);
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
}
- exp->e_siz = 0;
- if ( /* ok!=80 && */ (exp->e_end[-1] == ':' || exp->e_end[-1] == '.')
- && (exp->e_end - exp->e_beg) >= 2)
+ demand_empty_rest_of_line ();
+}
+
+/* Handle the MRI FOR pseudo-op. */
+
+static void
+s_mri_for (qual)
+ int qual;
+{
+ const char *varstart, *varstop;
+ const char *initstart, *initstop;
+ const char *endstart, *endstop;
+ const char *bystart, *bystop;
+ int up;
+ int by;
+ int extent;
+ struct mri_control_info *n;
+ char *buf;
+ char *s;
+ char ex[2];
+
+ /* The syntax is
+ FOR.q var = init { TO | DOWNTO } end [ BY by ] DO.e
+ */
+
+ SKIP_WHITESPACE ();
+ varstart = input_line_pointer;
+
+ /* Look for the '='. */
+ while (! is_end_of_line[(unsigned char) *input_line_pointer]
+ && *input_line_pointer != '=')
+ ++input_line_pointer;
+ if (*input_line_pointer != '=')
+ {
+ as_bad ("missing =");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ varstop = input_line_pointer;
+ if (varstop > varstart
+ && (varstop[-1] == ' ' || varstop[-1] == '\t'))
+ --varstop;
+
+ ++input_line_pointer;
+
+ initstart = input_line_pointer;
+
+ /* Look for TO or DOWNTO. */
+ up = 1;
+ initstop = NULL;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
{
- switch (exp->e_end[0])
+ if (strncasecmp (input_line_pointer, "TO", 2) == 0
+ && ! is_part_of_name (input_line_pointer[2]))
{
- case 's':
- case 'S':
- case 'b':
- case 'B':
- exp->e_siz = 1;
- exp->e_end -= 2;
- break;
- case 'w':
- case 'W':
- exp->e_siz = 2;
- exp->e_end -= 2;
- break;
- case 'l':
- case 'L':
- exp->e_siz = 3;
- exp->e_end -= 2;
- break;
- default:
- if (exp->e_end[-1] == ':')
- as_bad ("Unknown size for expression \"%c\"", exp->e_end[0]);
+ initstop = input_line_pointer;
+ input_line_pointer += 2;
break;
}
- }
- c_save = exp->e_end[1];
- exp->e_end[1] = '\0';
- save_in = input_line_pointer;
- input_line_pointer = exp->e_beg;
- section = expression (&exp->e_exp);
- seg (exp) = section;
- if (exp->e_exp.X_op == O_absent)
- {
- /* Do the same thing the VAX asm does */
- seg (exp) = absolute_section;
- op (exp) = O_constant;
- adds (exp) = 0;
- subs (exp) = 0;
- offs (exp) = 0;
- if (ok == 10)
+ if (strncasecmp (input_line_pointer, "DOWNTO", 6) == 0
+ && ! is_part_of_name (input_line_pointer[6]))
{
- as_warn ("expression out of range: defaulting to 1");
- offs (exp) = 1;
+ initstop = input_line_pointer;
+ up = 0;
+ input_line_pointer += 6;
+ break;
}
+ ++input_line_pointer;
}
- else if (exp->e_exp.X_op == O_constant)
+ if (initstop == NULL)
{
- switch (ok)
+ as_bad ("missing to or downto");
+ ignore_rest_of_line ();
+ return;
+ }
+ if (initstop > initstart
+ && (initstop[-1] == ' ' || initstop[-1] == '\t'))
+ --initstop;
+
+ SKIP_WHITESPACE ();
+ endstart = input_line_pointer;
+
+ /* Look for BY or DO. */
+ by = 0;
+ endstop = NULL;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ if (strncasecmp (input_line_pointer, "BY", 2) == 0
+ && ! is_part_of_name (input_line_pointer[2]))
{
- case 10:
- if (offs (exp) < 1 || offs (exp) > 8)
- {
- as_warn ("expression out of range: defaulting to 1");
- offs (exp) = 1;
- }
- break;
- case 20:
- if (offs (exp) < 0 || offs (exp) > 7)
- goto outrange;
- break;
- case 30:
- if (offs (exp) < 0 || offs (exp) > 15)
- goto outrange;
- break;
- case 40:
- if (offs (exp) < 0 || offs (exp) > 32)
- goto outrange;
- break;
- case 50:
- if (offs (exp) < 0 || offs (exp) > 127)
- goto outrange;
- break;
- case 55:
- if (offs (exp) < -64 || offs (exp) > 63)
- goto outrange;
- break;
- case 60:
- if (offs (exp) < -128 || offs (exp) > 127)
- goto outrange;
- break;
- case 70:
- if (offs (exp) < 0 || offs (exp) > 4095)
- {
- outrange:
- as_warn ("expression out of range: defaulting to 0");
- offs (exp) = 0;
- }
+ endstop = input_line_pointer;
+ by = 1;
+ input_line_pointer += 2;
break;
- default:
+ }
+ if (strncasecmp (input_line_pointer, "DO", 2) == 0
+ && (input_line_pointer[2] == '.'
+ || ! is_part_of_name (input_line_pointer[2])))
+ {
+ endstop = input_line_pointer;
+ input_line_pointer += 2;
break;
}
+ ++input_line_pointer;
}
- else if (exp->e_exp.X_op == O_big)
+ if (endstop == NULL)
{
- if (offs (exp) <= 0 /* flonum */
- && (ok == 80 /* no bignums */
- || (ok > 10 /* small-int ranges including 0 ok */
- /* If we have a flonum zero, a zero integer should
- do as well (e.g., in moveq). */
- && generic_floating_point_number.exponent == 0
- && generic_floating_point_number.low[0] == 0)))
- {
- /* HACK! Turn it into a long */
- LITTLENUM_TYPE words[6];
+ as_bad ("missing do");
+ ignore_rest_of_line ();
+ return;
+ }
+ if (endstop > endstart
+ && (endstop[-1] == ' ' || endstop[-1] == '\t'))
+ --endstop;
- gen_to_words (words, 2, 8L); /* These numbers are magic! */
- seg (exp) = absolute_section;
- op (exp) = O_constant;
- adds (exp) = 0;
- subs (exp) = 0;
- offs (exp) = words[1] | (words[0] << 16);
+ if (! by)
+ {
+ bystart = "#1";
+ bystop = bystart + 2;
+ }
+ else
+ {
+ SKIP_WHITESPACE ();
+ bystart = input_line_pointer;
+
+ /* Look for DO. */
+ bystop = NULL;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ if (strncasecmp (input_line_pointer, "DO", 2) == 0
+ && (input_line_pointer[2] == '.'
+ || ! is_part_of_name (input_line_pointer[2])))
+ {
+ bystop = input_line_pointer;
+ input_line_pointer += 2;
+ break;
+ }
+ ++input_line_pointer;
}
- else if (ok != 0)
+ if (bystop == NULL)
{
- seg (exp) = absolute_section;
- op (exp) = O_constant;
- adds (exp) = 0;
- subs (exp) = 0;
- offs (exp) = (ok == 10) ? 1 : 0;
- as_warn ("Can't deal with expression \"%s\": defaulting to %ld", exp->e_beg, offs (exp));
+ as_bad ("missing do");
+ ignore_rest_of_line ();
+ return;
}
+ if (bystop > bystart
+ && (bystop[-1] == ' ' || bystop[-1] == '\t'))
+ --bystop;
}
+
+ if (*input_line_pointer != '.')
+ extent = '\0';
else
{
- if (ok >= 10 && ok <= 70)
- {
- seg (exp) = absolute_section;
- op (exp) = O_constant;
- adds (exp) = 0;
- subs (exp) = 0;
- offs (exp) = (ok == 10) ? 1 : 0;
- as_warn ("Can't deal with expression \"%s\": defaulting to %ld", exp->e_beg, offs (exp));
- }
+ extent = input_line_pointer[1];
+ input_line_pointer += 2;
}
- if (input_line_pointer != exp->e_end + 1)
- as_bad ("Ignoring junk after expression");
- exp->e_end[1] = c_save;
- input_line_pointer = save_in;
- if (exp->e_siz)
+ /* We have fully parsed the FOR operands. Now build the loop. */
+
+ n = push_mri_control (mri_for);
+
+ buf = (char *) xmalloc (50 + (input_line_pointer - varstart));
+
+ /* move init,var */
+ s = buf;
+ *s++ = 'm';
+ *s++ = 'o';
+ *s++ = 'v';
+ *s++ = 'e';
+ if (qual != '\0')
+ *s++ = qual;
+ *s++ = ' ';
+ memcpy (s, initstart, initstop - initstart);
+ s += initstop - initstart;
+ *s++ = ',';
+ memcpy (s, varstart, varstop - varstart);
+ s += varstop - varstart;
+ *s = '\0';
+ md_assemble (buf);
+
+ colon (n->top);
+
+ /* cmp end,var */
+ s = buf;
+ *s++ = 'c';
+ *s++ = 'm';
+ *s++ = 'p';
+ if (qual != '\0')
+ *s++ = qual;
+ *s++ = ' ';
+ memcpy (s, endstart, endstop - endstart);
+ s += endstop - endstart;
+ *s++ = ',';
+ memcpy (s, varstart, varstop - varstart);
+ s += varstop - varstart;
+ *s = '\0';
+ md_assemble (buf);
+
+ /* bcc bottom */
+ ex[0] = extent;
+ ex[1] = '\0';
+ if (up)
+ sprintf (buf, "blt%s %s", ex, n->bottom);
+ else
+ sprintf (buf, "bgt%s %s", ex, n->bottom);
+ md_assemble (buf);
+
+ /* Put together the add or sub instruction used by ENDF. */
+ s = buf;
+ if (up)
+ strcpy (s, "add");
+ else
+ strcpy (s, "sub");
+ s += 3;
+ if (qual != '\0')
+ *s++ = qual;
+ *s++ = ' ';
+ memcpy (s, bystart, bystop - bystart);
+ s += bystop - bystart;
+ *s++ = ',';
+ memcpy (s, varstart, varstop - varstart);
+ s += varstop - varstart;
+ *s = '\0';
+ n->incr = buf;
+
+ if (flag_mri)
{
- switch (exp->e_siz)
- {
- case 1:
- if (!isbyte (offs (exp)))
- as_warn ("expression doesn't fit in BYTE");
- break;
- case 2:
- if (!isword (offs (exp)))
- as_warn ("expression doesn't fit in WORD");
- break;
- }
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
}
- return offs (exp);
-#endif
+
+ demand_empty_rest_of_line ();
}
-/* These are the back-ends for the various machine dependent pseudo-ops. */
-void demand_empty_rest_of_line (); /* Hate those extra verbose names */
+/* Handle the MRI ENDF pseudo-op. */
static void
-s_data1 (ignore)
+s_mri_endf (ignore)
int ignore;
{
- subseg_set (data_section, 1);
+ if (mri_control_stack == NULL
+ || mri_control_stack->type != mri_for)
+ {
+ as_bad ("endf without for");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ colon (mri_control_stack->next);
+
+ md_assemble (mri_control_stack->incr);
+
+ sprintf (mri_control_stack->incr, "bra %s", mri_control_stack->top);
+ md_assemble (mri_control_stack->incr);
+
+ free (mri_control_stack->incr);
+
+ colon (mri_control_stack->bottom);
+
+ pop_mri_control ();
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
demand_empty_rest_of_line ();
}
+/* Handle the MRI REPEAT pseudo-op. */
+
static void
-s_data2 (ignore)
+s_mri_repeat (ignore)
int ignore;
{
- subseg_set (data_section, 2);
+ struct mri_control_info *n;
+
+ n = push_mri_control (mri_repeat);
+ colon (n->top);
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
demand_empty_rest_of_line ();
}
+/* Handle the MRI UNTIL pseudo-op. */
+
static void
-s_bss (ignore)
- int ignore;
+s_mri_until (qual)
+ int qual;
{
- /* We don't support putting frags in the BSS segment, we fake it
- by marking in_bss, then looking at s_skip for clues. */
+ char *s;
+
+ if (mri_control_stack == NULL
+ || mri_control_stack->type != mri_repeat)
+ {
+ as_bad ("until without repeat");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ colon (mri_control_stack->next);
+
+ for (s = input_line_pointer; ! is_end_of_line[(unsigned char) *s]; s++)
+ ;
+
+ parse_mri_control_expression (s, qual, (const char *) NULL,
+ mri_control_stack->top, '\0');
+
+ colon (mri_control_stack->bottom);
+
+ input_line_pointer = s;
+
+ pop_mri_control ();
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
- subseg_set (bss_section, 0);
demand_empty_rest_of_line ();
}
+/* Handle the MRI WHILE pseudo-op. */
+
static void
-s_even (ignore)
- int ignore;
+s_mri_while (qual)
+ int qual;
{
- register int temp;
- register long temp_fill;
+ char *s;
+
+ struct mri_control_info *n;
+
+ s = input_line_pointer;
+ while (! is_end_of_line[(unsigned char) *s]
+ && (! flag_mri || *s != '*'))
+ s++;
+ --s;
+ while (*s == ' ' || *s == '\t')
+ --s;
+ if (s - input_line_pointer > 1
+ && s[-1] == '.')
+ s -= 2;
+ if (s - input_line_pointer < 2
+ || strncasecmp (s - 1, "DO", 2) != 0)
+ {
+ as_bad ("missing do");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ n = push_mri_control (mri_while);
+
+ colon (n->next);
+
+ parse_mri_control_expression (s - 1, qual, (const char *) NULL, n->bottom,
+ s[1] == '.' ? s[2] : '\0');
+
+ input_line_pointer = s + 1;
+ if (*input_line_pointer == '.')
+ input_line_pointer += 2;
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
- temp = 1; /* JF should be 2? */
- temp_fill = get_absolute_expression ();
- if (!need_pass_2) /* Never make frag if expect extra pass. */
- frag_align (temp, (int) temp_fill);
demand_empty_rest_of_line ();
}
+/* Handle the MRI ENDW pseudo-op. */
+
static void
-s_proc (ignore)
+s_mri_endw (ignore)
int ignore;
{
- demand_empty_rest_of_line ();
-}
+ char *buf;
+
+ if (mri_control_stack == NULL
+ || mri_control_stack->type != mri_while)
+ {
+ as_bad ("endw without while");
+ ignore_rest_of_line ();
+ return;
+ }
+
+ buf = (char *) xmalloc (20 + strlen (mri_control_stack->next));
+ sprintf (buf, "bra %s", mri_control_stack->next);
+ md_assemble (buf);
+ free (buf);
-/* s_space is defined in read.c .skip is simply an alias to it. */
+ colon (mri_control_stack->bottom);
+ pop_mri_control ();
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
+ demand_empty_rest_of_line ();
+}
\f
/*
* md_parse_option
* -pic Indicates PIC.
* -k Indicates PIC. (Sun 3 only.)
*
- * MAYBE_FLOAT_TOO is defined below so that specifying a processor type
- * (e.g. m68020) also requests that float instructions be included. This
- * is the default setup, mostly to avoid hassling users. A better
- * rearrangement of this structure would be to add an option to DENY
- * floating point opcodes, for people who want to really know there's none
- * of that funny floaty stuff going on. FIXME-later.
+ * --bitwise-or
+ * Permit `|' to be used in expressions.
+ *
*/
-#ifndef MAYBE_FLOAT_TOO
-#define MAYBE_FLOAT_TOO /* m68881 */ 0 /* this is handled later */
-#endif
+#ifdef OBJ_ELF
+CONST char *md_shortopts = "lSA:m:kQ:V";
+#else
CONST char *md_shortopts = "lSA:m:k";
+#endif
+
struct option md_longopts[] = {
#define OPTION_PIC (OPTION_MD_BASE)
{"pic", no_argument, NULL, OPTION_PIC},
#define OPTION_REGISTER_PREFIX_OPTIONAL (OPTION_MD_BASE + 1)
{"register-prefix-optional", no_argument, NULL,
OPTION_REGISTER_PREFIX_OPTIONAL},
+#define OPTION_BITWISE_OR (OPTION_MD_BASE + 2)
+ {"bitwise-or", no_argument, NULL, OPTION_BITWISE_OR},
+#define OPTION_BASE_SIZE_DEFAULT_16 (OPTION_MD_BASE + 3)
+ {"base-size-default-16", no_argument, NULL, OPTION_BASE_SIZE_DEFAULT_16},
+#define OPTION_BASE_SIZE_DEFAULT_32 (OPTION_MD_BASE + 4)
+ {"base-size-default-32", no_argument, NULL, OPTION_BASE_SIZE_DEFAULT_32},
+#define OPTION_DISP_SIZE_DEFAULT_16 (OPTION_MD_BASE + 5)
+ {"disp-size-default-16", no_argument, NULL, OPTION_DISP_SIZE_DEFAULT_16},
+#define OPTION_DISP_SIZE_DEFAULT_32 (OPTION_MD_BASE + 6)
+ {"disp-size-default-32", no_argument, NULL, OPTION_DISP_SIZE_DEFAULT_32},
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof(md_longopts);
arg++;
/* intentional fall-through */
case 'm':
- if (*arg == 'c')
- arg++;
- if (!strcmp (arg, "68000")
- || !strcmp (arg, "68008")
- || !strcmp (arg, "68302"))
- {
- current_architecture &=~ m68000up;
- current_architecture |= m68000;
- }
- else if (!strcmp (arg, "68010"))
- {
- current_architecture &=~ m68000up;
- current_architecture |= m68010;
- }
- else if (!strcmp (arg, "68020"))
+ if (arg[0] == 'n' && arg[1] == 'o' && arg[2] == '-')
{
- current_architecture &=~ m68000up;
- current_architecture |= m68020 | MAYBE_FLOAT_TOO;
- }
- else if (!strcmp (arg, "68030"))
- {
- current_architecture &=~ m68000up;
- current_architecture |= m68030 | MAYBE_FLOAT_TOO;
- }
- else if (!strcmp (arg, "68040"))
- {
- current_architecture &=~ m68000up;
- current_architecture |= m68040 | MAYBE_FLOAT_TOO;
- }
- else if (!strcmp (arg, "68060"))
- {
- current_architecture &=~ m68000up;
- current_architecture |= m68060 | MAYBE_FLOAT_TOO;
- }
-#ifndef NO_68881
- else if (!strcmp (arg, "68881"))
- {
- current_architecture |= m68881;
- no_68881 = 0;
- }
- else if (!strcmp (arg, "68882"))
- {
- current_architecture |= m68882;
- no_68881 = 0;
- }
-#endif /* NO_68881 */
- /* Even if we aren't configured to support the processor,
- it should still be possible to assert that the user
- doesn't have it... */
- else if (!strcmp (arg, "no-68881")
- || !strcmp (arg, "no-68882"))
- {
- no_68881 = 1;
- }
-#ifndef NO_68851
- else if (!strcmp (arg, "68851"))
- {
- current_architecture |= m68851;
- no_68851 = 0;
- }
-#endif /* NO_68851 */
- else if (!strcmp (arg, "no-68851"))
- {
- no_68851 = 1;
- }
- else if (!strcmp (arg, "pu32") /* "cpu32" minus 'c' */
- || !strcmp (arg, "68331")
- || !strcmp (arg, "68332")
- || !strcmp (arg, "68333")
- || !strcmp (arg, "68340"))
- {
- current_architecture &=~ m68000up;
- current_architecture |= cpu32;
+ int i;
+ unsigned long arch;
+ const char *oarg = arg;
+
+ arg += 3;
+ if (*arg == 'm')
+ {
+ arg++;
+ if (arg[0] == 'c' && arg[1] == '6')
+ arg++;
+ }
+ for (i = 0; i < n_archs; i++)
+ if (!strcmp (arg, archs[i].name))
+ break;
+ if (i == n_archs)
+ {
+ unknown:
+ as_bad ("unrecognized option `%s'", oarg);
+ return 0;
+ }
+ arch = archs[i].arch;
+ if (arch == m68881)
+ no_68881 = 1;
+ else if (arch == m68851)
+ no_68851 = 1;
+ else
+ goto unknown;
}
else
{
- as_bad ("invalid architecture %s", arg);
- return 0;
+ int i;
+
+ if (arg[0] == 'c' && arg[1] == '6')
+ arg++;
+
+ for (i = 0; i < n_archs; i++)
+ if (!strcmp (arg, archs[i].name))
+ {
+ unsigned long arch = archs[i].arch;
+ if (cpu_of_arch (arch))
+ /* It's a cpu spec. */
+ {
+ current_architecture &= ~m68000up;
+ current_architecture |= arch;
+ }
+ else if (arch == m68881)
+ {
+ current_architecture |= m68881;
+ no_68881 = 0;
+ }
+ else if (arch == m68851)
+ {
+ current_architecture |= m68851;
+ no_68851 = 0;
+ }
+ else
+ /* ??? */
+ abort ();
+ break;
+ }
+ if (i == n_archs)
+ {
+ as_bad ("unrecognized architecture specification `%s'", arg);
+ return 0;
+ }
}
break;
case OPTION_REGISTER_PREFIX_OPTIONAL:
flag_reg_prefix_optional = 1;
+ reg_prefix_optional_seen = 1;
+ break;
+
+ /* -V: SVR4 argument to print version ID. */
+ case 'V':
+ print_version_id ();
+ break;
+
+ /* -Qy, -Qn: SVR4 arguments controlling whether a .comment section
+ should be emitted or not. FIXME: Not implemented. */
+ case 'Q':
+ break;
+
+ case OPTION_BITWISE_OR:
+ {
+ char *n, *t;
+ const char *s;
+
+ n = (char *) xmalloc (strlen (m68k_comment_chars) + 1);
+ t = n;
+ for (s = m68k_comment_chars; *s != '\0'; s++)
+ if (*s != '|')
+ *t++ = *s;
+ *t = '\0';
+ m68k_comment_chars = n;
+ }
+ break;
+
+ case OPTION_BASE_SIZE_DEFAULT_16:
+ m68k_index_width_default = SIZE_WORD;
+ break;
+
+ case OPTION_BASE_SIZE_DEFAULT_32:
+ m68k_index_width_default = SIZE_LONG;
+ break;
+
+ case OPTION_DISP_SIZE_DEFAULT_16:
+ m68k_rel32 = 0;
+ m68k_rel32_from_cmdline = 1;
+ break;
+
+ case OPTION_DISP_SIZE_DEFAULT_32:
+ m68k_rel32 = 1;
+ m68k_rel32_from_cmdline = 1;
break;
default:
fprintf(stream, "\
680X0 options:\n\
-l use 1 word for refs to undefined symbols [default 2]\n\
--m68000 | -m68008 | -m68010 | -m68020 | -m68030 | -m68040\n\
- | -m68302 | -m68331 | -m68332 | -m68333 | -m68340 | -mcpu32\n\
+-m68000 | -m68008 | -m68010 | -m68020 | -m68030 | -m68040 | -m68060\n\
+ | -m68302 | -m68331 | -m68332 | -m68333 | -m68340 | -m68360\n\
+ | -mcpu32 | -m5200\n\
specify variant of 680X0 architecture [default 68020]\n\
-m68881 | -m68882 | -mno-68881 | -mno-68882\n\
target has/lacks floating-point coprocessor\n\
- [default yes for 68020, 68030, and cpu32]\n\
+ [default yes for 68020, 68030, and cpu32]\n");
+ fprintf(stream, "\
-m68851 | -mno-68851\n\
target has/lacks memory-management unit coprocessor\n\
[default yes for 68020 and up]\n\
-pic, -k generate position independent code\n\
-S turn jbsr into jsr\n\
--register-prefix-optional\n\
- recognize register names without prefix character\n");
+ recognize register names without prefix character\n\
+--bitwise-or do not treat `|' as a comment character\n");
+ fprintf (stream, "\
+--base-size-default-16 base reg without size is 16 bits\n\
+--base-size-default-32 base reg without size is 32 bits (default)\n\
+--disp-size-default-16 displacement with unknown size is 16 bits\n\
+--disp-size-default-32 displacement with unknown size is 32 bits (default)\n");
}
\f
#ifdef TEST2
return 0;
}
-/* Parse an operand that is machine-specific.
- We just return without modifying the expression if we have nothing
- to do. */
-
-/* ARGSUSED */
-void
-md_operand (expressionP)
- expressionS *expressionP;
-{
-}
-
/* Round up a section size to the appropriate boundary. */
valueT
md_section_align (segment, size)
}
/* Exactly what point is a PC-relative offset relative TO?
- On the 68k, they're relative to the address of the offset, plus
- its size. (??? Is this right? FIXME-SOON!) */
+ On the 68k, it is relative to the address of the first extension
+ word. The difference between the addresses of the offset and the
+ first extension word is stored in fx_pcrel_adjust. */
long
md_pcrel_from (fixP)
fixS *fixP;
{
- return (fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address);
+ int adjust;
+
+ /* Because fx_pcrel_adjust is a char, and may be unsigned, we store
+ -1 as 64. */
+ adjust = fixP->fx_pcrel_adjust;
+ if (adjust == 64)
+ adjust = -1;
+ return fixP->fx_where + fixP->fx_frag->fr_address - adjust;
}
#ifndef BFD_ASSEMBLER
return 4;
default:
abort ();
+ return 0;
}
}
#endif