/* tc-m68k.c -- Assemble for the m68k family
- Copyright (C) 1987-2016 Free Software Foundation, Inc.
+ Copyright (C) 1987-2020 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
#include "opcode/m68k.h"
#include "m68k-parse.h"
-
-#if defined (OBJ_ELF)
#include "elf/m68k.h"
-#endif
-
-#ifdef M68KCOFF
-#include "obj-coff.h"
-#endif
-#ifdef OBJ_ELF
static void m68k_elf_cons (int);
-#endif
/* This string holds the chars that always start a comment. If the
pre-processor is disabled, these aren't very useful. The macro
/* Pointer to list holding the opcodes sorted by name. */
static struct m68k_opcode const ** m68k_sorted_opcodes;
-/* Its an arbitrary name: This means I don't approve of it.
+/* It's an arbitrary name: This means I don't approve of it.
See flames below. */
static struct obstack robyn;
}
fragb[4];
- int nrel; /* Num of reloc strucs in use. */
+ int nrel; /* Num of reloc structs in use. */
struct
{
int n;
significance of some values (in the branch instruction, for
example). */
int pcrel_fix;
-#ifdef OBJ_ELF
/* Whether this expression needs special pic relocation, and if
so, which. */
enum pic_relocation pic_reloc;
-#endif
}
reloc[5]; /* Five is enough??? */
};
the_ins.reloc[the_ins.nrel].exp = exp->exp;
the_ins.reloc[the_ins.nrel].wid = width;
the_ins.reloc[the_ins.nrel].pcrel_fix = pc_fix;
-#ifdef OBJ_ELF
the_ins.reloc[the_ins.nrel].pic_reloc = exp->pic_reloc;
-#endif
the_ins.reloc[the_ins.nrel++].pcrel = pc_rel;
}
unsigned long arch; /* Architecture features. */
const enum m68k_register *control_regs; /* Control regs on chip */
const char *name; /* Name */
- int alias; /* Alias for a cannonical name. If 1, then
+ int alias; /* Alias for a canonical name. If 1, then
succeeds canonical name, if -1 then
succeeds canonical name, if <-1 ||>1 this is a
deprecated name, and the next/previous name
{"even", s_even, 0},
{"skip", s_space, 0},
{"proc", s_proc, 0},
-#if defined (TE_SUN3) || defined (OBJ_ELF)
{"align", s_align_bytes, 0},
-#endif
-#ifdef OBJ_ELF
{"swbeg", s_ignore, 0},
{"long", m68k_elf_cons, 4},
-#endif
{"extend", float_cons, 'x'},
{"ldouble", float_cons, 'x'},
{"dsb", s_space, 1},
{"xdef", s_globl, 0},
-#ifdef OBJ_ELF
{"align", s_align_bytes, 0},
-#else
- {"align", s_align_ptwo, 0},
-#endif
-#ifdef M68KCOFF
- {"sect", obj_coff_section, 0},
- {"section", obj_coff_section, 0},
-#endif
{0, 0, 0}
};
|| (*s == ':' \
&& alt_notend_table[(unsigned char) s[1]])))
-#ifdef OBJ_ELF
/* Return zero if the reference to SYMBOL from within the same segment may
be relaxed. */
}
}
-#else /* !OBJ_ELF */
-
-#define get_reloc_code(SIZE,PCREL,OTHER) NO_RELOC
-
-/* PR gas/3041 Weak symbols are not relaxable
- because they must be treated as extern. */
-#define relaxable_symbol(symbol) (!(S_IS_WEAK (symbol)))
-
-#endif /* OBJ_ELF */
-
arelent *
tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp)
{
reloc->sym_ptr_ptr = XNEW (asymbol *);
*reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
-#ifndef OBJ_ELF
- if (OUTPUT_FLAVOR == bfd_target_aout_flavour
- && fixp->fx_addsy
- && S_IS_WEAK (fixp->fx_addsy)
- && ! bfd_is_und_section (S_GET_SEGMENT (fixp->fx_addsy)))
- {
- /* PR gas/3041 References to weak symbols must be treated as extern
- in order to be overridable by the linker, even if they are defined
- in the same object file. So the original addend must be written
- "as is" into the output section without further processing.
- The addend value must be hacked here in order to force
- bfd_install_relocation() to write the original value into the
- output section.
- 1) MD_APPLY_SYM_VALUE() is set to 1 for m68k/a.out, so the symbol
- value has already been added to the addend in fixup_segment(). We
- have to remove it.
- 2) bfd_install_relocation() will incorrectly treat this symbol as
- resolved, so it will write the symbol value plus its addend and
- section VMA. As a workaround we can tweak the addend value here in
- order to get the original value in the section after the call to
- bfd_install_relocation(). */
- reloc->addend = fixp->fx_addnumber
- /* Fix because of MD_APPLY_SYM_VALUE() */
- - S_GET_VALUE (fixp->fx_addsy)
- /* Fix for bfd_install_relocation() */
- - (S_GET_VALUE (fixp->fx_addsy)
- + S_GET_SEGMENT (fixp->fx_addsy)->vma);
- }
- else if (fixp->fx_pcrel)
- reloc->addend = fixp->fx_addnumber;
- else
- reloc->addend = 0;
-#else
if (!fixp->fx_pcrel)
reloc->addend = fixp->fx_addnumber;
else
+ fixp->fx_pcrel_adjust
+ fixp->fx_addnumber
+ md_pcrel_from (fixp));
-#endif
reloc->howto = bfd_reloc_type_lookup (stdoutput, code);
gas_assert (reloc->howto != 0);
char *old = input_line_pointer;
*old = '\n';
input_line_pointer = p;
- /* Ahh - it's a motorola style psuedo op. */
+ /* Ahh - it's a motorola style pseudo op. */
mote_pseudo_table[opcode->m_opnum].poc_handler
(mote_pseudo_table[opcode->m_opnum].poc_val);
input_line_pointer = old;
opsfound = opP - &the_ins.operands[0];
/* This ugly hack is to support the floating pt opcodes in their
- standard form. Essentially, we fake a first enty of type COP#1 */
+ standard form. Essentially, we fake a first entry of type COP#1 */
if (opcode->m_operands[0] == 'I')
{
int n;
int use_pl = 0;
/* This switch is a doozy.
- Watch the first step; its a big one! */
+ Watch the first step; it's a big one! */
switch (s[0])
{
if (opP->reg == PC)
{
if (opP->disp.size == SIZE_LONG
-#ifdef OBJ_ELF
/* If the displacement needs pic
relocation it cannot be relaxed. */
- || opP->disp.pic_reloc != pic_none
-#endif
- )
+ || opP->disp.pic_reloc != pic_none)
{
addword (0x0170);
add_fix ('l', &opP->disp, 1, 2);
default:
abort ();
}
- /* IF its simple,
+ /* IF it's simple,
GET US OUT OF HERE! */
/* Must be INDEX, with an index register. Address
&& opP->reg == PC
&& isvar (&opP->disp)
&& subs (&opP->disp) == NULL
-#ifdef OBJ_ELF
/* If the displacement needs pic
relocation it cannot be relaxed. */
- && opP->disp.pic_reloc == pic_none
-#endif
- )
+ && opP->disp.pic_reloc == pic_none)
{
/* The code in md_convert_frag_1 needs to be
able to adjust nextword. Call frag_grow
if (isvar (&opP->disp)
&& !subs (&opP->disp)
&& adds (&opP->disp)
-#ifdef OBJ_ELF
/* If the displacement needs pic relocation it
cannot be relaxed. */
&& opP->disp.pic_reloc == pic_none
-#endif
&& !flag_long_jumps
&& !strchr ("~%&$?", s[0]))
{
var_branch:
if (subs (&opP->disp) /* We can't relax it. */
-#ifdef OBJ_ELF
/* If the displacement needs pic relocation it cannot be
relaxed. */
- || opP->disp.pic_reloc != pic_none
-#endif
- || 0)
+ || opP->disp.pic_reloc != pic_none)
{
if (!have_disp)
as_warn (_("Can't use long branches on this architecture"));
}
}
- /* By the time whe get here (FINALLY) the_ins contains the complete
+ /* By the time when get here (FINALLY) the_ins contains the complete
instruction, ready to be emitted. . . */
}
switch (mode)
{
case '/': /* Special for mask loads for mac/msac insns with
- possible mask; trailing_ampersend set in bit 8. */
+ possible mask; trailing_ampersand set in bit 8. */
the_ins.opcode[0] |= (val & 0x3f);
the_ins.opcode[1] |= (((val & 0x100) >> 8) << 5);
break;
current_label = NULL;
}
-#ifdef OBJ_ELF
/* Tie dwarf2 debug info to the address at the start of the insn. */
dwarf2_emit_insn (0);
-#endif
if (the_ins.nfrag == 0)
{
n = 4;
break;
default:
- as_fatal (_("Don't know how to figure width of %c in md_assemble()"),
+ as_fatal (_("Don't know how to figure out width of %c in md_assemble()"),
the_ins.reloc[m].wid);
}
m68k_rel32 = 0;
}
- /* First sort the opcode table into alphabetical order to seperate
+ /* First sort the opcode table into alphabetical order to separate
the order that the assembler wants to see the opcodes from the
order that the disassembler wants to see them. */
m68k_sorted_opcodes = XNEWVEC (const struct m68k_opcode *, m68k_numopcodes);
init_regtable ();
-#ifdef OBJ_ELF
record_alignment (text_section, 2);
record_alignment (data_section, 2);
record_alignment (bss_section, 2);
-#endif
}
\f
labels = n;
current_label = n;
-#ifdef OBJ_ELF
dwarf2_emit_label (sym);
-#endif
}
/* This is called when a value that is not an instruction is emitted. */
if (fixP->fx_addsy == NULL && fixP->fx_pcrel == 0)
fixP->fx_done = 1;
-#ifdef OBJ_ELF
if (fixP->fx_addsy)
{
memset (buf, 0, fixP->fx_size);
return;
}
-#elif defined(OBJ_AOUT)
- /* PR gas/3041 Do not fix frags referencing a weak symbol. */
- if (fixP->fx_addsy && S_IS_WEAK (fixP->fx_addsy))
- {
- memset (buf, 0, fixP->fx_size);
- fixP->fx_addnumber = val; /* Remember value for emit_reloc. */
- return;
- }
-#endif
if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
return md_relax_table[fragP->fr_subtype].rlx_length;
}
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
-/* the bit-field entries in the relocation_info struct plays hell
- with the byte-order problems of cross-assembly. So as a hack,
- I added this mach. dependent ri twiddler. Ugly, but it gets
- you there. -KWK */
-/* on m68k: first 4 bytes are normal unsigned long, next three bytes
- are symbolnum, most sig. byte first. Last byte is broken up with
- bit 7 as pcrel, bits 6 & 5 as length, bit 4 as pcrel, and the lower
- nibble as nuthin. (on Sun 3 at least) */
-/* Translate the internal relocation information into target-specific
- format. */
-#ifdef comment
-void
-md_ri_to_chars (char *the_bytes, struct reloc_info_generic *ri)
-{
- /* This is easy. */
- md_number_to_chars (the_bytes, ri->r_address, 4);
- /* Now the fun stuff. */
- the_bytes[4] = (ri->r_symbolnum >> 16) & 0x0ff;
- the_bytes[5] = (ri->r_symbolnum >> 8) & 0x0ff;
- the_bytes[6] = ri->r_symbolnum & 0x0ff;
- the_bytes[7] = (((ri->r_pcrel << 7) & 0x80)
- | ((ri->r_length << 5) & 0x60)
- | ((ri->r_extern << 4) & 0x10));
-}
-
-#endif
-
-#endif /* OBJ_AOUT or OBJ_BOUT */
-
#ifndef WORKING_DOT_WORD
int md_short_jump_size = 4;
int md_long_jump_size = 6;
#endif
-/* Different values of OK tell what its OK to return. Things that
+/* Different values of OK tell what it's OK to return. Things that
aren't OK are an error (what a shock, no?)
0: Everything is OK
Invocation line includes a switch not recognized by the base assembler.
*/
-#ifdef OBJ_ELF
const char *md_shortopts = "lSA:m:kQ:V";
-#else
-const char *md_shortopts = "lSA:m:k";
-#endif
struct option md_longopts[] = {
#define OPTION_PIC (OPTION_MD_BASE)
"), default_cpu);
for (i = 0; m68k_extensions[i].name; i++)
fprintf (stream, _("\
--m[no-]%-16s enable/disable%s architecture extension\n\
+-m[no-]%-16s enable/disable %s architecture extension\n\
"), m68k_extensions[i].name,
m68k_extensions[i].alias > 0 ? " ColdFire"
: m68k_extensions[i].alias < 0 ? " m68k" : "");
valueT
md_section_align (segT segment ATTRIBUTE_UNUSED, valueT size)
{
-#ifdef OBJ_AOUT
- /* For a.out, force the section size to be aligned. If we don't do
- this, BFD will align it for us, but it will not write out the
- final bytes of the section. This may be a bug in BFD, but it is
- easier to fix it here since that is how the other a.out targets
- work. */
- int align;
-
- align = bfd_get_section_alignment (stdoutput, segment);
- size = ((size + (1 << align) - 1) & (-((valueT) 1 << align)));
-#endif
-
return size;
}
return fixP->fx_where + fixP->fx_frag->fr_address - adjust;
}
-#ifdef OBJ_ELF
void
m68k_elf_final_processing (void)
{
if (size > nbytes)
{
- as_bad (_("%s relocations do not fit in %d bytes\n"),
+ as_bad (ngettext ("%s relocations do not fit in %u byte",
+ "%s relocations do not fit in %u bytes",
+ nbytes),
reloc_howto->name, nbytes);
}
else
input_line_pointer--;
demand_empty_rest_of_line ();
}
-#endif
int
tc_m68k_regname_to_dw2regnum (const char *regname)
projects / deliverable / binutils-gdb.git / blobdiff