-/* m68k.c All the m68020 specific stuff in one convenient, huge,
- slow to compile, easy to find file.
- Copyright (C) 1987, 1991 Free Software Foundation, Inc.
+/* tc-m68k.c -- Assemble for the m68k family
+ Copyright 1987, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001
+ Free Software Foundation, Inc.
-This file is part of GAS, the GNU Assembler.
+ This file is part of GAS, the GNU Assembler.
-GAS is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+ GAS is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
-GAS is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ GAS is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with GAS; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
#include <ctype.h>
-
#include "as.h"
-
#include "obstack.h"
+#include "subsegs.h"
- /* note that this file includes real declarations and thus can only be included by one source file per executable. */
-#include "m68k-opcode.h"
-#ifdef TE_SUN
-/* This variable contains the value to write out at the beginning of
- the a.out file. The 2<<16 means that this is a 68020 file instead
- of an old-style 68000 file */
+#include "opcode/m68k.h"
+#include "m68k-parse.h"
-long omagic = 2<<16|OMAGIC; /* Magic byte for header file */
-#else
-long omagic = OMAGIC;
+#if defined (OBJ_ELF)
+#include "elf/m68k.h"
#endif
-/* This array holds the chars that always start a comment. If the
- pre-processor is disabled, these aren't very useful */
-const char comment_chars[] = "|";
+/* This string holds the chars that always start a comment. If the
+ pre-processor is disabled, these aren't very useful. The macro
+ tc_comment_chars points to this. We use this, rather than the
+ usual comment_chars, so that the --bitwise-or option will work. */
+#if defined (TE_SVR4) || defined (TE_DELTA)
+const char *m68k_comment_chars = "|#";
+#else
+const char *m68k_comment_chars = "|";
+#endif
/* This array holds the chars that only start a comment at the beginning of
a line. If the line seems to have the form '# 123 filename'
.line and .file directives will appear in the pre-processed output */
/* Note that input_file.c hand checks for '#' at the beginning of the
first line of the input file. This is because the compiler outputs
- #NO_APP at the beginning of its output. */
-/* Also note that comments like this one will always work. */
-const char line_comment_chars[] = "#";
+ #NO_APP at the beginning of its output. */
+/* Also note that comments like this one will always work. */
+const char line_comment_chars[] = "#*";
+
+const char line_separator_chars[] = ";";
/* Chars that can be used to separate mant from exp in floating point nums */
-const char EXP_CHARS[] = "eE";
+CONST char EXP_CHARS[] = "eE";
-/* Chars that mean this number is a floating point constant */
-/* As in 0f12.456 */
-/* or 0d1.2345e12 */
+/* Chars that mean this number is a floating point constant, as
+ in "0f12.456" or "0d1.2345e12". */
-const char FLT_CHARS[] = "rRsSfFdDxXeEpP";
+CONST char FLT_CHARS[] = "rRsSfFdDxXeEpP";
/* Also be aware that MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT may have to be
changed in read.c . Ideally it shouldn't have to know about it at all,
- but nothing is ideal around here.
- */
+ but nothing is ideal around here. */
-int md_reloc_size = 8; /* Size of relocation record */
+const int md_reloc_size = 8; /* Size of relocation record */
-/* Its an arbitrary name: This means I don't approve of it */
-/* See flames below */
-static struct obstack robyn;
+/* Are we trying to generate PIC code? If so, absolute references
+ ought to be made into linkage table references or pc-relative
+ references. Not implemented. For ELF there are other means
+ to denote pic relocations. */
+int flag_want_pic;
-#define TAB(x,y) (((x)<<2)+(y))
-#define TABTYPE(xy) ((xy) >> 2)
-#define BYTE 0
-#define SHORT 1
-#define LONG 2
-#define SZ_UNDEF 3
+static int flag_short_refs; /* -l option */
+static int flag_long_jumps; /* -S option */
+static int flag_keep_pcrel; /* --pcrel option. */
-#define BRANCH 1
-#define FBRANCH 2
-#define PCREL 3
-#define BCC68000 4
-#define DBCC 5
-#define PCLEA 6
-
-/* Operands we can parse: (And associated modes)
-
-numb: 8 bit num
-numw: 16 bit num
-numl: 32 bit num
-dreg: data reg 0-7
-reg: address or data register
-areg: address register
-apc: address register, PC, ZPC or empty string
-num: 16 or 32 bit num
-num2: like num
-sz: w or l if omitted, l assumed
-scale: 1 2 4 or 8 if omitted, 1 assumed
-
-7.4 IMMED #num --> NUM
-0.? DREG dreg --> dreg
-1.? AREG areg --> areg
-2.? AINDR areg@ --> *(areg)
-3.? AINC areg@+ --> *(areg++)
-4.? ADEC areg@- --> *(--areg)
-5.? AOFF apc@(numw) --> *(apc+numw) -- empty string and ZPC not allowed here
-6.? AINDX apc@(num,reg:sz:scale) --> *(apc+num+reg*scale)
-6.? AINDX apc@(reg:sz:scale) --> same, with num=0
-6.? APODX apc@(num)@(num2,reg:sz:scale) --> *(*(apc+num)+num2+reg*scale)
-6.? APODX apc@(num)@(reg:sz:scale) --> same, with num2=0
-6.? AMIND apc@(num)@(num2) --> *(*(apc+num)+num2) (previous mode without an index reg)
-6.? APRDX apc@(num,reg:sz:scale)@(num2) --> *(*(apc+num+reg*scale)+num2)
-6.? APRDX apc@(reg:sz:scale)@(num2) --> same, with num=0
-7.0 ABSL num:sz --> *(num)
- num --> *(num) (sz L assumed)
-*** MSCR otherreg --> Magic
-With -l option
-5.? AOFF apc@(num) --> *(apc+num) -- empty string and ZPC not allowed here still
-
-examples:
- #foo #0x35 #12
- d2
- a4
- a3@
- a5@+
- a6@-
- a2@(12) pc@(14)
- a1@(5,d2:w:1) @(45,d6:l:4)
- pc@(a2) @(d4)
- etc . . .
-
-
-#name@(numw) -->turn into PC rel mode
-apc@(num8,reg:sz:scale) --> *(apc+num8+reg*scale)
-
-*/
-
-enum operand_type {
- IMMED = 1,
- DREG,
- AREG,
- AINDR,
- ADEC,
- AINC,
- AOFF,
- AINDX,
- APODX,
- AMIND,
- APRDX,
- ABSL,
- MSCR,
- REGLST,
-};
+#ifdef REGISTER_PREFIX_OPTIONAL
+int flag_reg_prefix_optional = REGISTER_PREFIX_OPTIONAL;
+#else
+int flag_reg_prefix_optional;
+#endif
+/* Whether --register-prefix-optional was used on the command line. */
+static int reg_prefix_optional_seen;
-struct m68k_exp {
- char *e_beg;
- char *e_end;
- expressionS e_exp;
- short e_siz; /* 0== default 1==short/byte 2==word 3==long */
-};
+/* The floating point coprocessor to use by default. */
+static enum m68k_register m68k_float_copnum = COP1;
-/* DATA and ADDR have to be contiguous, so that reg-DATA gives 0-7==data reg,
- 8-15==addr reg for operands that take both types */
-
-enum _register {
- DATA = 1, /* 1- 8 == data registers 0-7 */
- DATA0 = DATA,
- DATA1,
- DATA2,
- DATA3,
- DATA4,
- DATA5,
- DATA6,
- DATA7,
-
- ADDR,
- ADDR0 = ADDR,
- ADDR1,
- ADDR2,
- ADDR3,
- ADDR4,
- ADDR5,
- ADDR6,
- ADDR7,
-
-/* Note that COPNUM==processor #1 -- COPNUM+7==#8, which stores as 000 */
-/* I think. . . */
-
- SP = ADDR7,
-
- FPREG, /* Eight FP registers */
- FP0 = FPREG,
- FP1,
- FP2,
- FP3,
- FP4,
- FP5,
- FP6,
- FP7,
- COPNUM = (FPREG+8), /* Co-processor #1-#8 */
- COP0 = COPNUM,
- COP1,
- COP2,
- COP3,
- COP4,
- COP5,
- COP6,
- COP7,
- PC, /* Program counter */
- ZPC, /* Hack for Program space, but 0 addressing */
- SR, /* Status Reg */
- CCR, /* Condition code Reg */
-
-/* These have to be in order for the movec instruction to work. */
- USP, /* User Stack Pointer */
- ISP, /* Interrupt stack pointer */
- SFC,
- DFC,
- CACR,
- VBR,
- CAAR,
- MSP,
- ITT0,
- ITT1,
- DTT0,
- DTT1,
- MMUSR,
- TC,
- SRP,
- URP,
-/* end of movec ordering constraints */
-
- FPI,
- FPS,
- FPC,
-
- DRP,
- CRP,
- CAL,
- VAL,
- SCC,
- AC,
- BAD,
- BAD0 = BAD,
- BAD1,
- BAD2,
- BAD3,
- BAD4,
- BAD5,
- BAD6,
- BAD7,
- BAC,
- BAC0 = BAC,
- BAC1,
- BAC2,
- BAC3,
- BAC4,
- BAC5,
- BAC6,
- BAC7,
- PSR,
- PCSR,
-
- IC, /* instruction cache token */
- DC, /* data cache token */
- NC, /* no cache token */
- BC, /* both caches token */
+/* If this is non-zero, then references to number(%pc) will be taken
+ to refer to number, rather than to %pc + number. */
+static int m68k_abspcadd;
-};
+/* If this is non-zero, then the quick forms of the move, add, and sub
+ instructions are used when possible. */
+static int m68k_quick = 1;
-/* Internal form of an operand. */
-struct m68k_op {
- char *error; /* Couldn't parse it */
- enum operand_type mode; /* What mode this instruction is in. */
- enum _register reg; /* Base register */
- struct m68k_exp *con1;
- int ireg; /* Index register */
- int isiz; /* 0==unspec 1==byte(?) 2==short 3==long */
- int imul; /* Multipy ireg by this (1,2,4,or 8) */
- struct m68k_exp *con2;
-};
+/* If this is non-zero, then if the size is not specified for a base
+ or outer displacement, the assembler assumes that the size should
+ be 32 bits. */
+static int m68k_rel32 = 1;
-/* internal form of a 68020 instruction */
-struct m68k_it {
- char *error;
- char *args; /* list of opcode info */
- int numargs;
-
- int numo; /* Number of shorts in opcode */
- short opcode[11];
-
- struct m68k_op operands[6];
-
- int nexp; /* number of exprs in use */
- struct m68k_exp exprs[4];
-
- int nfrag; /* Number of frags we have to produce */
- struct {
- int fragoff; /* Where in the current opcode[] the frag ends */
- symbolS *fadd;
- long foff;
- int fragty;
- } fragb[4];
-
- int nrel; /* Num of reloc strucs in use */
- struct {
- int n;
- symbolS *add,
- *sub;
- long off;
- char wid;
- char pcrel;
- } reloc[5]; /* Five is enough??? */
+/* This is non-zero if m68k_rel32 was set from the command line. */
+static int m68k_rel32_from_cmdline;
+
+/* The default width to use for an index register when using a base
+ displacement. */
+static enum m68k_size m68k_index_width_default = SIZE_LONG;
+
+/* We want to warn if any text labels are misaligned. In order to get
+ the right line number, we need to record the line number for each
+ label. */
+
+struct label_line
+{
+ struct label_line *next;
+ symbolS *label;
+ char *file;
+ unsigned int line;
+ int text;
};
-#define cpu_of_arch(x) ((x) & m68000up)
-#define float_of_arch(x) ((x) & mfloat)
-#define mmu_of_arch(x) ((x) & mmmu)
+/* The list of labels. */
-static struct m68k_it the_ins; /* the instruction being assembled */
+static struct label_line *labels;
-/* Macros for adding things to the m68k_it struct */
+/* The current label. */
-#define addword(w) the_ins.opcode[the_ins.numo++]=(w)
+static struct label_line *current_label;
-/* Like addword, but goes BEFORE general operands */
-#define insop(w) {int z;\
- for(z=the_ins.numo;z>opcode->m_codenum;--z)\
- the_ins.opcode[z]=the_ins.opcode[z-1];\
- for(z=0;z<the_ins.nrel;z++)\
- the_ins.reloc[z].n+=2;\
- the_ins.opcode[opcode->m_codenum]=w;\
- the_ins.numo++;\
-}
+/* Its an arbitrary name: This means I don't approve of it */
+/* See flames below */
+static struct obstack robyn;
+struct m68k_incant
+ {
+ const char *m_operands;
+ unsigned long m_opcode;
+ short m_opnum;
+ short m_codenum;
+ int m_arch;
+ struct m68k_incant *m_next;
+ };
-#define add_exp(beg,end) (\
- the_ins.exprs[the_ins.nexp].e_beg=beg,\
- the_ins.exprs[the_ins.nexp].e_end=end,\
- &the_ins.exprs[the_ins.nexp++]\
-)
+#define getone(x) ((((x)->m_opcode)>>16)&0xffff)
+#define gettwo(x) (((x)->m_opcode)&0xffff)
+static const enum m68k_register m68000_control_regs[] = { 0 };
+static const enum m68k_register m68010_control_regs[] = {
+ SFC, DFC, USP, VBR,
+ 0
+};
+static const enum m68k_register m68020_control_regs[] = {
+ SFC, DFC, USP, VBR, CACR, CAAR, MSP, ISP,
+ 0
+};
+static const enum m68k_register m68040_control_regs[] = {
+ SFC, DFC, CACR, TC, ITT0, ITT1, DTT0, DTT1,
+ USP, VBR, MSP, ISP, MMUSR, URP, SRP,
+ 0
+};
+static const enum m68k_register m68060_control_regs[] = {
+ SFC, DFC, CACR, TC, ITT0, ITT1, DTT0, DTT1, BUSCR,
+ USP, VBR, URP, SRP, PCR,
+ 0
+};
+static const enum m68k_register mcf_control_regs[] = {
+ CACR, TC, ITT0, ITT1, DTT0, DTT1, VBR, ROMBAR,
+ RAMBAR0, RAMBAR1, MBAR,
+ 0
+};
+#define cpu32_control_regs m68010_control_regs
-/* The numo+1 kludge is so we can hit the low order byte of the prev word. Blecch*/
-#define add_fix(width,exp,pc_rel) {\
- the_ins.reloc[the_ins.nrel].n= ((width)=='B') ? (the_ins.numo*2-1) : \
- (((width)=='b') ? ((the_ins.numo-1)*2) : (the_ins.numo*2));\
- the_ins.reloc[the_ins.nrel].add=adds((exp));\
- the_ins.reloc[the_ins.nrel].sub=subs((exp));\
- the_ins.reloc[the_ins.nrel].off=offs((exp));\
- the_ins.reloc[the_ins.nrel].wid=width;\
- the_ins.reloc[the_ins.nrel++].pcrel=pc_rel;\
-}
+static const enum m68k_register *control_regs;
-#define add_frag(add,off,type) {\
- the_ins.fragb[the_ins.nfrag].fragoff=the_ins.numo;\
- the_ins.fragb[the_ins.nfrag].fadd=add;\
- the_ins.fragb[the_ins.nfrag].foff=off;\
- the_ins.fragb[the_ins.nfrag++].fragty=type;\
-}
+/* internal form of a 68020 instruction */
+struct m68k_it
+{
+ const char *error;
+ const char *args; /* list of opcode info */
+ int numargs;
-#define isvar(exp) ((exp) && (adds(exp) || subs(exp)))
+ int numo; /* Number of shorts in opcode */
+ short opcode[11];
-#define seg(exp) ((exp)->e_exp.X_seg)
-#define adds(exp) ((exp)->e_exp.X_add_symbol)
-#define subs(exp) ((exp)->e_exp.X_subtract_symbol)
-#define offs(exp) ((exp)->e_exp.X_add_number)
+ struct m68k_op operands[6];
+ int nexp; /* number of exprs in use */
+ struct m68k_exp exprs[4];
-struct m68k_incant {
- char *m_operands;
- unsigned long m_opcode;
- short m_opnum;
- short m_codenum;
- enum m68k_architecture m_arch;
- struct m68k_incant *m_next;
+ int nfrag; /* Number of frags we have to produce */
+ struct
+ {
+ int fragoff; /* Where in the current opcode the frag ends */
+ symbolS *fadd;
+ offsetT foff;
+ int fragty;
+ }
+ fragb[4];
+
+ int nrel; /* Num of reloc strucs in use */
+ struct
+ {
+ int n;
+ expressionS exp;
+ char wid;
+ char pcrel;
+ /* In a pc relative address the difference between the address
+ of the offset and the address that the offset is relative
+ to. This depends on the addressing mode. Basically this
+ is the value to put in the offset field to address the
+ first byte of the offset, without regarding the special
+ significance of some values (in the branch instruction, for
+ example). */
+ int pcrel_fix;
+#ifdef OBJ_ELF
+ /* Whether this expression needs special pic relocation, and if
+ so, which. */
+ enum pic_relocation pic_reloc;
+#endif
+ }
+ reloc[5]; /* Five is enough??? */
};
-#define getone(x) ((((x)->m_opcode)>>16)&0xffff)
-#define gettwo(x) (((x)->m_opcode)&0xffff)
+#define cpu_of_arch(x) ((x) & (m68000up|mcf))
+#define float_of_arch(x) ((x) & mfloat)
+#define mmu_of_arch(x) ((x) & mmmu)
+#define arch_coldfire_p(x) (((x) & mcf) != 0)
+/* Macros for determining if cpu supports a specific addressing mode */
+#define HAVE_LONG_BRANCH(x) ((x) & (m68020|m68030|m68040|m68060|cpu32|mcf5407))
-#ifdef __STDC__
+static struct m68k_it the_ins; /* the instruction being assembled */
-static char *crack_operand(char *str, struct m68k_op *opP);
-static int get_num(struct m68k_exp *exp, int ok);
-static int get_regs(int i, char *str, struct m68k_op *opP);
-static int reverse_16_bits(int in);
-static int reverse_8_bits(int in);
-static int try_index(char **s, struct m68k_op *opP);
-static void install_gen_operand(int mode, int val);
-static void install_operand(int mode, int val);
-static void s_bss(void);
-static void s_data1(void);
-static void s_data2(void);
-static void s_even(void);
-static void s_proc(void);
+#define op(ex) ((ex)->exp.X_op)
+#define adds(ex) ((ex)->exp.X_add_symbol)
+#define subs(ex) ((ex)->exp.X_op_symbol)
+#define offs(ex) ((ex)->exp.X_add_number)
-#else /* __STDC__ */
+/* Macros for adding things to the m68k_it struct */
-static char *crack_operand();
-static int get_num();
-static int get_regs();
-static int reverse_16_bits();
-static int reverse_8_bits();
-static int try_index();
-static void install_gen_operand();
-static void install_operand();
-static void s_bss();
-static void s_data1();
-static void s_data2();
-static void s_even();
-static void s_proc();
+#define addword(w) the_ins.opcode[the_ins.numo++]=(w)
-#endif /* __STDC__ */
+/* Static functions. */
-static enum m68k_architecture current_architecture = 0;
+static void insop PARAMS ((int, const struct m68k_incant *));
+static void add_fix PARAMS ((int, struct m68k_exp *, int, int));
+static void add_frag PARAMS ((symbolS *, offsetT, int));
-/* BCC68000 is for patching in an extra jmp instruction for long offsets
- on the 68000. The 68000 doesn't support long branches with branchs */
+/* Like addword, but goes BEFORE general operands */
+static void
+insop (w, opcode)
+ int w;
+ const struct m68k_incant *opcode;
+{
+ int z;
+ for(z=the_ins.numo;z>opcode->m_codenum;--z)
+ the_ins.opcode[z]=the_ins.opcode[z-1];
+ for(z=0;z<the_ins.nrel;z++)
+ the_ins.reloc[z].n+=2;
+ for (z = 0; z < the_ins.nfrag; z++)
+ the_ins.fragb[z].fragoff++;
+ the_ins.opcode[opcode->m_codenum]=w;
+ the_ins.numo++;
+}
-/* This table desribes how you change sizes for the various types of variable
- size expressions. This version only supports two kinds. */
+/* The numo+1 kludge is so we can hit the low order byte of the prev word.
+ Blecch. */
+static void
+add_fix (width, exp, pc_rel, pc_fix)
+ int width;
+ struct m68k_exp *exp;
+ int pc_rel;
+ int pc_fix;
+{
+ the_ins.reloc[the_ins.nrel].n = ((width == 'B' || width == '3')
+ ? (the_ins.numo*2-1)
+ : (((width)=='b')
+ ? (the_ins.numo*2+1)
+ : (the_ins.numo*2)));
+ the_ins.reloc[the_ins.nrel].exp = exp->exp;
+ the_ins.reloc[the_ins.nrel].wid = width;
+ the_ins.reloc[the_ins.nrel].pcrel_fix = pc_fix;
+#ifdef OBJ_ELF
+ the_ins.reloc[the_ins.nrel].pic_reloc = exp->pic_reloc;
+#endif
+ the_ins.reloc[the_ins.nrel++].pcrel = pc_rel;
+}
-/* Note that calls to frag_var need to specify the maximum expansion needed */
-/* This is currently 10 bytes for DBCC */
+/* Cause an extra frag to be generated here, inserting up to 10 bytes
+ (that value is chosen in the frag_var call in md_assemble). TYPE
+ is the subtype of the frag to be generated; its primary type is
+ rs_machine_dependent.
+
+ The TYPE parameter is also used by md_convert_frag_1 and
+ md_estimate_size_before_relax. The appropriate type of fixup will
+ be emitted by md_convert_frag_1.
+
+ ADD becomes the FR_SYMBOL field of the frag, and OFF the FR_OFFSET. */
+static void
+add_frag (add, off, type)
+ symbolS *add;
+ offsetT off;
+ int type;
+{
+ the_ins.fragb[the_ins.nfrag].fragoff=the_ins.numo;
+ the_ins.fragb[the_ins.nfrag].fadd=add;
+ the_ins.fragb[the_ins.nfrag].foff=off;
+ the_ins.fragb[the_ins.nfrag++].fragty=type;
+}
-/* The fields are:
- How far Forward this mode will reach:
- How far Backward this mode will reach:
- How many bytes this mode will add to the size of the frag
- Which mode to go to if the offset won't fit in this one
- */
-const relax_typeS
-md_relax_table[] = {
-{ 1, 1, 0, 0 }, /* First entries aren't used */
-{ 1, 1, 0, 0 }, /* For no good reason except */
-{ 1, 1, 0, 0 }, /* that the VAX doesn't either */
-{ 1, 1, 0, 0 },
-
-{ (127), (-128), 0, TAB(BRANCH,SHORT)},
-{ (32767), (-32768), 2, TAB(BRANCH,LONG) },
-{ 0, 0, 4, 0 },
-{ 1, 1, 0, 0 },
-
-{ 1, 1, 0, 0 }, /* FBRANCH doesn't come BYTE */
-{ (32767), (-32768), 2, TAB(FBRANCH,LONG)},
-{ 0, 0, 4, 0 },
-{ 1, 1, 0, 0 },
-
-{ 1, 1, 0, 0 }, /* PCREL doesn't come BYTE */
-{ (32767), (-32768), 2, TAB(PCREL,LONG)},
-{ 0, 0, 4, 0 },
-{ 1, 1, 0, 0 },
-
-{ (127), (-128), 0, TAB(BCC68000,SHORT)},
-{ (32767), (-32768), 2, TAB(BCC68000,LONG) },
-{ 0, 0, 6, 0 }, /* jmp long space */
-{ 1, 1, 0, 0 },
-
-{ 1, 1, 0, 0 }, /* DBCC doesn't come BYTE */
-{ (32767), (-32768), 2, TAB(DBCC,LONG) },
-{ 0, 0, 10, 0 }, /* bra/jmp long space */
-{ 1, 1, 0, 0 },
-
-{ 1, 1, 0, 0 }, /* PCLEA doesn't come BYTE */
-{ 32767, -32768, 2, TAB(PCLEA,LONG) },
-{ 0, 0, 6, 0 },
-{ 1, 1, 0, 0 },
+#define isvar(ex) \
+ (op (ex) != O_constant && op (ex) != O_big)
+
+static char *crack_operand PARAMS ((char *str, struct m68k_op *opP));
+static int get_num PARAMS ((struct m68k_exp *exp, int ok));
+static void m68k_ip PARAMS ((char *));
+static void insert_reg PARAMS ((const char *, int));
+static void select_control_regs PARAMS ((void));
+static void init_regtable PARAMS ((void));
+static int reverse_16_bits PARAMS ((int in));
+static int reverse_8_bits PARAMS ((int in));
+static void install_gen_operand PARAMS ((int mode, int val));
+static void install_operand PARAMS ((int mode, int val));
+static void s_bss PARAMS ((int));
+static void s_data1 PARAMS ((int));
+static void s_data2 PARAMS ((int));
+static void s_even PARAMS ((int));
+static void s_proc PARAMS ((int));
+static void mri_chip PARAMS ((void));
+static void s_chip PARAMS ((int));
+static void s_fopt PARAMS ((int));
+static void s_opt PARAMS ((int));
+static void s_reg PARAMS ((int));
+static void s_restore PARAMS ((int));
+static void s_save PARAMS ((int));
+static void s_mri_if PARAMS ((int));
+static void s_mri_else PARAMS ((int));
+static void s_mri_endi PARAMS ((int));
+static void s_mri_break PARAMS ((int));
+static void s_mri_next PARAMS ((int));
+static void s_mri_for PARAMS ((int));
+static void s_mri_endf PARAMS ((int));
+static void s_mri_repeat PARAMS ((int));
+static void s_mri_until PARAMS ((int));
+static void s_mri_while PARAMS ((int));
+static void s_mri_endw PARAMS ((int));
+static void md_apply_fix_2 PARAMS ((fixS *, offsetT));
+static void md_convert_frag_1 PARAMS ((fragS *));
+
+static int current_architecture;
+
+struct m68k_cpu
+ {
+ unsigned long arch;
+ const char *name;
+ int alias;
+ };
+
+static const struct m68k_cpu archs[] =
+ {
+ { m68000, "68000", 0 },
+ { m68010, "68010", 0 },
+ { m68020, "68020", 0 },
+ { m68030, "68030", 0 },
+ { m68040, "68040", 0 },
+ { m68060, "68060", 0 },
+ { cpu32, "cpu32", 0 },
+ { m68881, "68881", 0 },
+ { m68851, "68851", 0 },
+ { mcf5200, "5200", 0 },
+ { mcf5206e, "5206e", 0 },
+ { mcf5307, "5307", 0},
+ { mcf5407, "5407", 0},
+ /* Aliases (effectively, so far as gas is concerned) for the above
+ cpus. */
+ { m68020, "68k", 1 },
+ { m68000, "68008", 1 },
+ { m68000, "68302", 1 },
+ { m68000, "68306", 1 },
+ { m68000, "68307", 1 },
+ { m68000, "68322", 1 },
+ { m68000, "68356", 1 },
+ { m68000, "68ec000", 1 },
+ { m68000, "68hc000", 1 },
+ { m68000, "68hc001", 1 },
+ { m68020, "68ec020", 1 },
+ { m68030, "68ec030", 1 },
+ { m68040, "68ec040", 1 },
+ { m68060, "68ec060", 1 },
+ { cpu32, "68330", 1 },
+ { cpu32, "68331", 1 },
+ { cpu32, "68332", 1 },
+ { cpu32, "68333", 1 },
+ { cpu32, "68334", 1 },
+ { cpu32, "68336", 1 },
+ { cpu32, "68340", 1 },
+ { cpu32, "68341", 1 },
+ { cpu32, "68349", 1 },
+ { cpu32, "68360", 1 },
+ { m68881, "68882", 1 },
+ { mcf5200, "5202", 1 },
+ { mcf5200, "5204", 1 },
+ { mcf5200, "5206", 1 },
+ };
+
+static const int n_archs = sizeof (archs) / sizeof (archs[0]);
+
+/* This is the assembler relaxation table for m68k. m68k is a rich CISC
+ architecture and we have a lot of relaxation modes. */
+
+/* Macros used in the relaxation code. */
+#define TAB(x,y) (((x) << 2) + (y))
+#define TABTYPE(x) ((x) >> 2)
+
+/* Relaxation states. */
+#define BYTE 0
+#define SHORT 1
+#define LONG 2
+#define SZ_UNDEF 3
+/* Here are all the relaxation modes we support. First we can relax ordinary
+ branches. On 68020 and higher and on CPU32 all branch instructions take
+ three forms, so on these CPUs all branches always remain as such. When we
+ have to expand to the LONG form on a 68000, though, we substitute an
+ absolute jump instead. This is a direct replacement for unconditional
+ branches and a branch over a jump for conditional branches. However, if the
+ user requires PIC and disables this with --pcrel, we can only relax between
+ BYTE and SHORT forms, punting if that isn't enough. This gives us four
+ different relaxation modes for branches: */
+
+#define BRANCHBWL 1 /* branch byte, word, or long */
+#define BRABSJUNC 2 /* absolute jump for LONG, unconditional */
+#define BRABSJCOND 3 /* absolute jump for LONG, conditional */
+#define BRANCHBW 4 /* branch byte or word */
+
+/* We also relax coprocessor branches and DBcc's. All CPUs that support
+ coprocessor branches support them in word and long forms, so we have only
+ one relaxation mode for them. DBcc's are word only on all CPUs. We can
+ relax them to the LONG form with a branch-around sequence. This sequence
+ can use a long branch (if available) or an absolute jump (if acceptable).
+ This gives us two relaxation modes. If long branches are not available and
+ absolute jumps are not acceptable, we don't relax DBcc's. */
+
+#define FBRANCH 5 /* coprocessor branch */
+#define DBCCLBR 6 /* DBcc relaxable with a long branch */
+#define DBCCABSJ 7 /* DBcc relaxable with an absolute jump */
+
+/* That's all for instruction relaxation. However, we also relax PC-relative
+ operands. Specifically, we have three operand relaxation modes. On the
+ 68000 PC-relative operands can only be 16-bit, but on 68020 and higher and
+ on CPU32 they may be 16-bit or 32-bit. For the latter we relax between the
+ two. Also PC+displacement+index operands in their simple form (with a non-
+ suppressed index without memory indirection) are supported on all CPUs, but
+ on the 68000 the displacement can be 8-bit only, whereas on 68020 and higher
+ and on CPU32 we relax it to SHORT and LONG forms as well using the extended
+ form of the PC+displacement+index operand. Finally, some absolute operands
+ can be relaxed down to 16-bit PC-relative. */
+
+#define PCREL1632 8 /* 16-bit or 32-bit PC-relative */
+#define PCINDEX 9 /* PC+displacement+index */
+#define ABSTOPCREL 10 /* absolute relax down to 16-bit PC-relative */
+
+/* Note that calls to frag_var need to specify the maximum expansion
+ needed; this is currently 10 bytes for DBCC. */
+
+/* The fields are:
+ How far Forward this mode will reach:
+ How far Backward this mode will reach:
+ How many bytes this mode will add to the size of the frag
+ Which mode to go to if the offset won't fit in this one
+ */
+relax_typeS md_relax_table[] =
+{
+ {1, 1, 0, 0}, /* First entries aren't used */
+ {1, 1, 0, 0}, /* For no good reason except */
+ {1, 1, 0, 0}, /* that the VAX doesn't either */
+ {1, 1, 0, 0},
+
+ {(127), (-128), 0, TAB (BRANCHBWL, SHORT)},
+ {(32767), (-32768), 2, TAB (BRANCHBWL, LONG)},
+ {0, 0, 4, 0},
+ {1, 1, 0, 0},
+
+ {(127), (-128), 0, TAB (BRABSJUNC, SHORT)},
+ {(32767), (-32768), 2, TAB (BRABSJUNC, LONG)},
+ {0, 0, 4, 0},
+ {1, 1, 0, 0},
+
+ {(127), (-128), 0, TAB (BRABSJCOND, SHORT)},
+ {(32767), (-32768), 2, TAB (BRABSJCOND, LONG)},
+ {0, 0, 6, 0},
+ {1, 1, 0, 0},
+
+ {(127), (-128), 0, TAB (BRANCHBW, SHORT)},
+ {0, 0, 2, 0},
+ {1, 1, 0, 0},
+ {1, 1, 0, 0},
+
+ {1, 1, 0, 0}, /* FBRANCH doesn't come BYTE */
+ {(32767), (-32768), 2, TAB (FBRANCH, LONG)},
+ {0, 0, 4, 0},
+ {1, 1, 0, 0},
+
+ {1, 1, 0, 0}, /* DBCC doesn't come BYTE */
+ {(32767), (-32768), 2, TAB (DBCCLBR, LONG)},
+ {0, 0, 10, 0},
+ {1, 1, 0, 0},
+
+ {1, 1, 0, 0}, /* DBCC doesn't come BYTE */
+ {(32767), (-32768), 2, TAB (DBCCABSJ, LONG)},
+ {0, 0, 10, 0},
+ {1, 1, 0, 0},
+
+ {1, 1, 0, 0}, /* PCREL1632 doesn't come BYTE */
+ {32767, -32768, 2, TAB (PCREL1632, LONG)},
+ {0, 0, 6, 0},
+ {1, 1, 0, 0},
+
+ {125, -130, 0, TAB (PCINDEX, SHORT)},
+ {32765, -32770, 2, TAB (PCINDEX, LONG)},
+ {0, 0, 4, 0},
+ {1, 1, 0, 0},
+
+ {1, 1, 0, 0}, /* ABSTOPCREL doesn't come BYTE */
+ {(32767), (-32768), 2, TAB (ABSTOPCREL, LONG)},
+ {0, 0, 4, 0},
+ {1, 1, 0, 0},
};
/* These are the machine dependent pseudo-ops. These are included so
the assembler can work on the output from the SUN C compiler, which
generates these.
- */
+ */
/* This table describes all the machine specific pseudo-ops the assembler
has to support. The fields are:
- pseudo-op name without dot
- function to call to execute this pseudo-op
- Integer arg to pass to the function
- */
-const pseudo_typeS md_pseudo_table[] = {
- { "data1", s_data1, 0 },
- { "data2", s_data2, 0 },
- { "bss", s_bss, 0 },
- { "even", s_even, 0 },
- { "skip", s_space, 0 },
- { "proc", s_proc, 0 },
- { 0, 0, 0 }
+ pseudo-op name without dot
+ function to call to execute this pseudo-op
+ Integer arg to pass to the function
+ */
+const pseudo_typeS md_pseudo_table[] =
+{
+ {"data1", s_data1, 0},
+ {"data2", s_data2, 0},
+ {"bss", s_bss, 0},
+ {"even", s_even, 0},
+ {"skip", s_space, 0},
+ {"proc", s_proc, 0},
+#if defined (TE_SUN3) || defined (OBJ_ELF)
+ {"align", s_align_bytes, 0},
+#endif
+#ifdef OBJ_ELF
+ {"swbeg", s_ignore, 0},
+#endif
+ {"extend", float_cons, 'x'},
+ {"ldouble", float_cons, 'x'},
+
+ /* The following pseudo-ops are supported for MRI compatibility. */
+ {"chip", s_chip, 0},
+ {"comline", s_space, 1},
+ {"fopt", s_fopt, 0},
+ {"mask2", s_ignore, 0},
+ {"opt", s_opt, 0},
+ {"reg", s_reg, 0},
+ {"restore", s_restore, 0},
+ {"save", s_save, 0},
+
+ {"if", s_mri_if, 0},
+ {"if.b", s_mri_if, 'b'},
+ {"if.w", s_mri_if, 'w'},
+ {"if.l", s_mri_if, 'l'},
+ {"else", s_mri_else, 0},
+ {"else.s", s_mri_else, 's'},
+ {"else.l", s_mri_else, 'l'},
+ {"endi", s_mri_endi, 0},
+ {"break", s_mri_break, 0},
+ {"break.s", s_mri_break, 's'},
+ {"break.l", s_mri_break, 'l'},
+ {"next", s_mri_next, 0},
+ {"next.s", s_mri_next, 's'},
+ {"next.l", s_mri_next, 'l'},
+ {"for", s_mri_for, 0},
+ {"for.b", s_mri_for, 'b'},
+ {"for.w", s_mri_for, 'w'},
+ {"for.l", s_mri_for, 'l'},
+ {"endf", s_mri_endf, 0},
+ {"repeat", s_mri_repeat, 0},
+ {"until", s_mri_until, 0},
+ {"until.b", s_mri_until, 'b'},
+ {"until.w", s_mri_until, 'w'},
+ {"until.l", s_mri_until, 'l'},
+ {"while", s_mri_while, 0},
+ {"while.b", s_mri_while, 'b'},
+ {"while.w", s_mri_while, 'w'},
+ {"while.l", s_mri_while, 'l'},
+ {"endw", s_mri_endw, 0},
+
+ {0, 0, 0}
};
+/* The mote pseudo ops are put into the opcode table, since they
+ don't start with a . they look like opcodes to gas.
+ */
+
+#ifdef M68KCOFF
+extern void obj_coff_section PARAMS ((int));
+#endif
+
+CONST pseudo_typeS mote_pseudo_table[] =
+{
+
+ {"dcl", cons, 4},
+ {"dc", cons, 2},
+ {"dcw", cons, 2},
+ {"dcb", cons, 1},
+
+ {"dsl", s_space, 4},
+ {"ds", s_space, 2},
+ {"dsw", s_space, 2},
+ {"dsb", s_space, 1},
-/* #define isbyte(x) ((x)>=-128 && (x)<=127) */
-/* #define isword(x) ((x)>=-32768 && (x)<=32767) */
+ {"xdef", s_globl, 0},
+#ifdef OBJ_ELF
+ {"align", s_align_bytes, 0},
+#else
+ {"align", s_align_ptwo, 0},
+#endif
+#ifdef M68KCOFF
+ {"sect", obj_coff_section, 0},
+ {"section", obj_coff_section, 0},
+#endif
+ {0, 0, 0}
+};
#define issbyte(x) ((x)>=-128 && (x)<=127)
#define isubyte(x) ((x)>=0 && (x)<=255)
#define issword(x) ((x)>=-32768 && (x)<=32767)
#define isuword(x) ((x)>=0 && (x)<=65535)
-#define isbyte(x) ((x)>=-128 && (x)<=255)
-#define isword(x) ((x)>=-32768 && (x)<=65535)
+#define isbyte(x) ((x)>= -255 && (x)<=255)
+#define isword(x) ((x)>=-65536 && (x)<=65535)
#define islong(x) (1)
extern char *input_line_pointer;
-enum {
- FAIL = 0,
- OK = 1,
-};
-
-/* JF these tables here are for speed at the expense of size */
-/* You can replace them with the #if 0 versions if you really
- need space and don't mind it running a bit slower */
-
static char mklower_table[256];
-#define mklower(c) (mklower_table[(unsigned char)(c)])
+#define mklower(c) (mklower_table[(unsigned char) (c)])
static char notend_table[256];
static char alt_notend_table[256];
-#define notend(s) ( !(notend_table[(unsigned char)(*s)] || (*s==':' &&\
- alt_notend_table[(unsigned char)(s[1])])))
-
-#if 0
-#define mklower(c) (isupper(c) ? tolower(c) : c)
-#endif
-
+#define notend(s) \
+ (! (notend_table[(unsigned char) *s] \
+ || (*s == ':' \
+ && alt_notend_table[(unsigned char) s[1]])))
-/* JF modified this to handle cases where the first part of a symbol name
- looks like a register */
+#if defined (M68KCOFF) && !defined (BFD_ASSEMBLER)
-/*
- * m68k_reg_parse() := if it looks like a register, return it's token &
- * advance the pointer.
- */
+#ifdef NO_PCREL_RELOCS
-enum _register m68k_reg_parse(ccp)
-register char **ccp;
+int
+make_pcrel_absolute(fixP, add_number)
+ fixS *fixP;
+ long *add_number;
{
-#ifndef MAX_REG_NAME_LEN
-#define MAX_REG_NAME_LEN (6)
-#endif /* MAX_REG_NAME_LEN */
- register char c[MAX_REG_NAME_LEN];
- char *p, *q;
- register int n = 0,
- ret = FAIL;
-
- c[0] = mklower(ccp[0][0]);
-#ifdef REGISTER_PREFIX
- if (c[0] != REGISTER_PREFIX) {
- return(FAIL);
- } /* need prefix */
-#endif
-
- for (p = c, q = ccp[0]; p < c + MAX_REG_NAME_LEN; ++p, ++q)
- {
- if (*q == 0)
- {
- *p = 0;
- break;
- }
- else
- *p = mklower(*q);
- } /* downcase */
-
- switch(c[0]) {
- case 'a':
- if(c[1]>='0' && c[1]<='7') {
- n=2;
- ret=ADDR+c[1]-'0';
- }
-#ifndef NO_68851
- else if (c[1] == 'c') {
- n = 2;
- ret = AC;
- }
-#endif
- break;
-#ifndef NO_68851
- case 'b':
- if (c[1] == 'a') {
- if (c[2] == 'd') {
- if (c[3] >= '0' && c[3] <= '7') {
- n = 4;
- ret = BAD + c[3] - '0';
- }
- } /* BAD */
- if (c[2] == 'c') {
- if (c[3] >= '0' && c[3] <= '7') {
- n = 4;
- ret = BAC + c[3] - '0';
- }
- } /* BAC */
- } else if (c[1] == 'c') {
- n = 2;
- ret = BC;
- } /* BC */
- break;
-#endif
- case 'c':
-#ifndef NO_68851
- if (c[1] == 'a' && c[2] == 'l') {
- n = 3;
- ret = CAL;
- } else
-#endif
- /* This supports both CCR and CC as the ccr reg. */
- if(c[1]=='c' && c[2]=='r') {
- n=3;
- ret = CCR;
- } else if(c[1]=='c') {
- n=2;
- ret = CCR;
- } else if(c[1]=='a' && (c[2]=='a' || c[2]=='c') && c[3]=='r') {
- n=4;
- ret = c[2]=='a' ? CAAR : CACR;
- }
-#ifndef NO_68851
- else if (c[1] == 'r' && c[2] == 'p') {
- n = 3;
- ret = (CRP);
- }
-#endif
- break;
- case 'd':
- if (c[1] >= '0' && c[1] <= '7') {
- n = 2;
- ret = DATA + c[1] - '0';
- } else if (c[1] == 'f' && c[2] == 'c') {
- n = 3;
- ret = DFC;
- } else if (c[1] == 'c') {
- n = 2;
- ret = DC;
- } else if (c[1] == 't' && c[2] == 't') {
- if ('0' <= c[3] && c[3] <= '1') {
- n = 4;
- ret = DTT0 + (c[3] - '0');
- } /* DTT[01] */
- }
-#ifndef NO_68851
- else if (c[1] == 'r' && c[2] == 'p') {
- n = 3;
- ret = (DRP);
- }
-#endif
- break;
- case 'f':
- if(c[1]=='p') {
- if(c[2]>='0' && c[2]<='7') {
- n=3;
- ret = FPREG+c[2]-'0';
- if(c[3]==':')
- ccp[0][3]=',';
- } else if(c[2]=='i') {
- n=3;
- ret = FPI;
- } else if(c[2]=='s') {
- n= (c[3] == 'r' ? 4 : 3);
- ret = FPS;
- } else if(c[2]=='c') {
- n= (c[3] == 'r' ? 4 : 3);
- ret = FPC;
- }
- }
- break;
- case 'i':
- if (c[1] == 's' && c[2] == 'p') {
- n = 3;
- ret = ISP;
- } else if (c[1] == 'c') {
- n = 2;
- ret = IC;
- } else if (c[1] == 't' && c[2] == 't') {
- if ('0' <= c[3] && c[3] <= '1') {
- n = 4;
- ret = ITT0 + (c[3] - '0');
- } /* ITT[01] */
- }
- break;
- case 'm':
- if (c[1] == 's' && c[2] == 'p') {
- n = 3;
- ret = MSP;
- } else if (c[1] == 'm' && c[2] == 'u' && c[3] == 's' && c[4] == 'r') {
- n = 5;
- ret = MMUSR;
- }
- break;
- case 'n':
- if (c[1] == 'c') {
- n = 2;
- ret = NC;
- }
- break;
- case 'p':
- if(c[1]=='c') {
-#ifndef NO_68851
- if(c[2] == 's' && c[3]=='r') {
- n=4;
- ret = (PCSR);
- } else
-#endif
- {
- n=2;
- ret = PC;
- }
- }
-#ifndef NO_68851
- else if (c[1] == 's' && c[2] == 'r') {
- n = 3;
- ret = (PSR);
- }
-#endif
- break;
- case 's':
-#ifndef NO_68851
- if (c[1] == 'c' && c[2] == 'c') {
- n = 3;
- ret = (SCC);
- } else
-#endif
- if (c[1] == 'r') {
- if (c[2] == 'p') {
- n = 3;
- ret = SRP;
- } else {
- n = 2;
- ret = SR;
- } /* srp else sr */
- } else if (c[1] == 'p') {
- n = 2;
- ret = SP;
- } else if (c[1] == 'f' && c[2] == 'c') {
- n = 3;
- ret = SFC;
- }
- break;
- case 't':
- if (c[1] == 'c') {
- n = 2;
- ret = TC;
- }
- break;
- case 'u':
- if (c[1] == 's' && c[2] == 'p') {
- n=3;
- ret = USP;
- } else if (c[1] == 'r' && c[2] == 'p') {
- n = 3;
- ret = URP;
- }
- break;
- case 'v':
-#ifndef NO_68851
- if (c[1] == 'a' && c[2] == 'l') {
- n = 3;
- ret = (VAL);
- } else
-#endif
- if(c[1]=='b' && c[2]=='r') {
- n=3;
- ret = VBR;
- }
- break;
- case 'z':
- if(c[1]=='p' && c[2]=='c') {
- n=3;
- ret = ZPC;
- }
- break;
- default:
- break;
- }
- if(n) {
-#ifdef REGISTER_PREFIX
- n++;
-#endif
- if(isalnum(ccp[0][n]) || ccp[0][n]=='_')
- ret=FAIL;
- else
- ccp[0]+=n;
- } else
- ret = FAIL;
- return ret;
+ register unsigned char *opcode = fixP->fx_frag->fr_opcode;
+
+ /* rewrite the PC relative instructions to absolute address ones.
+ * these are rumoured to be faster, and the apollo linker refuses
+ * to deal with the PC relative relocations.
+ */
+ if (opcode[0] == 0x60 && opcode[1] == 0xff) /* BRA -> JMP */
+ {
+ opcode[0] = 0x4e;
+ opcode[1] = 0xf9;
+ }
+ else if (opcode[0] == 0x61 && opcode[1] == 0xff) /* BSR -> JSR */
+ {
+ opcode[0] = 0x4e;
+ opcode[1] = 0xb9;
+ }
+ else
+ as_fatal (_("Unknown PC relative instruction"));
+ *add_number -= 4;
+ return 0;
}
-#define SKIP_WHITE() { str++; if(*str==' ') str++;}
-
-/*
- * m68k_ip_op := '#' + <anything>
- * | <register> + range_sep + get_regs
- * ;
- *
- * range_sep := '/' | '-' ;
- *
- * SKIP_WHITE := <empty> | ' ' ;
- *
- */
+#endif /* NO_PCREL_RELOCS */
-int
-m68k_ip_op(str,opP)
-char *str;
-register struct m68k_op *opP;
+short
+tc_coff_fix2rtype (fixP)
+ fixS *fixP;
{
- char *strend;
- long i;
- char *parse_index();
-
- if (*str==' ') {
- str++;
- } /* Find the beginning of the string */
-
- if(!*str) {
- opP->error="Missing operand";
- return FAIL;
- } /* Out of gas */
+ if (fixP->fx_tcbit && fixP->fx_size == 4)
+ return R_RELLONG_NEG;
+#ifdef NO_PCREL_RELOCS
+ know (fixP->fx_pcrel == 0);
+ return (fixP->fx_size == 1 ? R_RELBYTE
+ : fixP->fx_size == 2 ? R_DIR16
+ : R_DIR32);
+#else
+ return (fixP->fx_pcrel ?
+ (fixP->fx_size == 1 ? R_PCRBYTE :
+ fixP->fx_size == 2 ? R_PCRWORD :
+ R_PCRLONG) :
+ (fixP->fx_size == 1 ? R_RELBYTE :
+ fixP->fx_size == 2 ? R_RELWORD :
+ R_RELLONG));
+#endif
+}
- for(strend = str; *strend; strend++) ;;
+#endif
- --strend;
-
- if(*str=='#') {
- str++;
- opP->con1=add_exp(str,strend);
- opP->mode=IMMED;
- return OK;
- } /* Guess what: A constant. Shar and enjoy */
+#ifdef OBJ_ELF
- i = m68k_reg_parse(&str);
+/* Return zero if the reference to SYMBOL from within the same segment may
+ be relaxed. */
- /* is a register, is exactly a register, and is followed by '@' */
+/* On an ELF system, we can't relax an externally visible symbol,
+ because it may be overridden by a shared library. However, if
+ TARGET_OS is "elf", then we presume that we are assembling for an
+ embedded system, in which case we don't have to worry about shared
+ libraries, and we can relax any external sym. */
- if((i==FAIL || *str!='\0') && *str!='@') {
- char *stmp;
+#define relaxable_symbol(symbol) \
+ (!((S_IS_EXTERNAL (symbol) && strcmp (TARGET_OS, "elf") != 0) \
+ || S_IS_WEAK (symbol)))
- if(i!=FAIL && (*str=='/' || *str=='-')) {
- opP->mode=REGLST;
- return(get_regs(i,str,opP));
- }
- if ((stmp=strchr(str,'@')) != '\0') {
- opP->con1=add_exp(str,stmp-1);
- if(stmp==strend) {
- opP->mode=AINDX;
- return(OK);
- }
+/* Compute the relocation code for a fixup of SIZE bytes, using pc
+ relative relocation if PCREL is non-zero. PIC says whether a special
+ pic relocation was requested. */
- if ((current_architecture & m68020up) == 0) {
- return(FAIL);
- } /* if target is not a '20 or better */
+static bfd_reloc_code_real_type get_reloc_code
+ PARAMS ((int, int, enum pic_relocation));
- stmp++;
- if(*stmp++!='(' || *strend--!=')') {
- opP->error="Malformed operand";
- return(FAIL);
- }
- i=try_index(&stmp,opP);
- opP->con2=add_exp(stmp,strend);
-
- if (i == FAIL) {
- opP->mode=AMIND;
- } else {
- opP->mode=APODX;
- }
- return(OK);
- } /* if there's an '@' */
- opP->mode = ABSL;
- opP->con1 = add_exp(str,strend);
- return(OK);
- } /* not a register, not exactly a register, or no '@' */
-
- opP->reg=i;
-
- if (*str=='\0') {
- if(i>=DATA+0 && i<=DATA+7)
- opP->mode=DREG;
- else if(i>=ADDR+0 && i<=ADDR+7)
- opP->mode=AREG;
- else
- opP->mode=MSCR;
- return OK;
+static bfd_reloc_code_real_type
+get_reloc_code (size, pcrel, pic)
+ int size;
+ int pcrel;
+ enum pic_relocation pic;
+{
+ switch (pic)
+ {
+ case pic_got_pcrel:
+ switch (size)
+ {
+ case 1:
+ return BFD_RELOC_8_GOT_PCREL;
+ case 2:
+ return BFD_RELOC_16_GOT_PCREL;
+ case 4:
+ return BFD_RELOC_32_GOT_PCREL;
}
+ break;
- if((i<ADDR+0 || i>ADDR+7) && i!=PC && i!=ZPC && i!=FAIL) { /* Can't indirect off non address regs */
- opP->error="Invalid indirect register";
- return FAIL;
+ case pic_got_off:
+ switch (size)
+ {
+ case 1:
+ return BFD_RELOC_8_GOTOFF;
+ case 2:
+ return BFD_RELOC_16_GOTOFF;
+ case 4:
+ return BFD_RELOC_32_GOTOFF;
}
- know(*str == '@');
+ break;
- str++;
- switch(*str) {
- case '\0':
- opP->mode=AINDR;
- return OK;
- case '-':
- opP->mode=ADEC;
- return OK;
- case '+':
- opP->mode=AINC;
- return OK;
- case '(':
- str++;
- break;
- default:
- opP->error="Junk after indirect";
- return FAIL;
+ case pic_plt_pcrel:
+ switch (size)
+ {
+ case 1:
+ return BFD_RELOC_8_PLT_PCREL;
+ case 2:
+ return BFD_RELOC_16_PLT_PCREL;
+ case 4:
+ return BFD_RELOC_32_PLT_PCREL;
}
- /* Some kind of indexing involved. Lets find out how bad it is */
- i=try_index(&str,opP);
- /* Didn't start with an index reg, maybe its offset or offset,reg */
- if(i==FAIL) {
- char *beg_str;
-
- beg_str=str;
- for(i=1;i;) {
- switch(*str++) {
- case '\0':
- opP->error="Missing )";
- return FAIL;
- case ',': i=0; break;
- case '(': i++; break;
- case ')': --i; break;
- }
- }
- /* if(str[-3]==':') {
- int siz;
-
- switch(str[-2]) {
- case 'b':
- case 'B':
- siz=1;
- break;
- case 'w':
- case 'W':
- siz=2;
- break;
- case 'l':
- case 'L':
- siz=3;
- break;
- default:
- opP->error="Specified size isn't :w or :l";
- return FAIL;
- }
- opP->con1=add_exp(beg_str,str-4);
- opP->con1->e_siz=siz;
- } else */
- opP->con1=add_exp(beg_str,str-2);
- /* Should be offset,reg */
- if(str[-1]==',') {
- i=try_index(&str,opP);
- if(i==FAIL) {
- opP->error="Malformed index reg";
- return FAIL;
- }
- }
+ break;
+
+ case pic_plt_off:
+ switch (size)
+ {
+ case 1:
+ return BFD_RELOC_8_PLTOFF;
+ case 2:
+ return BFD_RELOC_16_PLTOFF;
+ case 4:
+ return BFD_RELOC_32_PLTOFF;
}
- /* We've now got offset) offset,reg) or reg) */
-
- if (*str == '\0') {
- /* Th-the-thats all folks */
- if (opP->reg == FAIL) opP->mode = AINDX; /* Other form of indirect */
- else if(opP->ireg == FAIL) opP->mode = AOFF;
- else opP->mode = AINDX;
- return(OK);
+ break;
+
+ case pic_none:
+ if (pcrel)
+ {
+ switch (size)
+ {
+ case 1:
+ return BFD_RELOC_8_PCREL;
+ case 2:
+ return BFD_RELOC_16_PCREL;
+ case 4:
+ return BFD_RELOC_32_PCREL;
+ }
}
- /* Next thing had better be another @ */
- if(*str!='@' || str[1]!='(') {
- opP->error = "junk after indirect";
- return(FAIL);
+ else
+ {
+ switch (size)
+ {
+ case 1:
+ return BFD_RELOC_8;
+ case 2:
+ return BFD_RELOC_16;
+ case 4:
+ return BFD_RELOC_32;
+ }
}
-
- if ((current_architecture & m68020up) == 0) {
- return(FAIL);
- } /* if target is not a '20 or better */
-
- str+=2;
+ }
- if(opP->ireg != FAIL) {
- opP->mode = APRDX;
+ if (pcrel)
+ {
+ if (pic == pic_none)
+ as_bad (_("Can not do %d byte pc-relative relocation"), size);
+ else
+ as_bad (_("Can not do %d byte pc-relative pic relocation"), size);
+ }
+ else
+ {
+ if (pic == pic_none)
+ as_bad (_("Can not do %d byte relocation"), size);
+ else
+ as_bad (_("Can not do %d byte pic relocation"), size);
+ }
- i = try_index(&str, opP);
- if (i != FAIL) {
- opP->error = "Two index registers! not allowed!";
- return(FAIL);
- }
- } else {
- i = try_index(&str, opP);
- }
+ return BFD_RELOC_NONE;
+}
- if (i == FAIL) {
- char *beg_str;
+/* Here we decide which fixups can be adjusted to make them relative
+ to the beginning of the section instead of the symbol. Basically
+ we need to make sure that the dynamic relocations are done
+ correctly, so in some cases we force the original symbol to be
+ used. */
+int
+tc_m68k_fix_adjustable (fixP)
+ fixS *fixP;
+{
+ /* Prevent all adjustments to global symbols. */
+ if (! relaxable_symbol (fixP->fx_addsy))
+ return 0;
+
+ /* adjust_reloc_syms doesn't know about the GOT */
+ switch (fixP->fx_r_type)
+ {
+ case BFD_RELOC_8_GOT_PCREL:
+ case BFD_RELOC_16_GOT_PCREL:
+ case BFD_RELOC_32_GOT_PCREL:
+ case BFD_RELOC_8_GOTOFF:
+ case BFD_RELOC_16_GOTOFF:
+ case BFD_RELOC_32_GOTOFF:
+ case BFD_RELOC_8_PLT_PCREL:
+ case BFD_RELOC_16_PLT_PCREL:
+ case BFD_RELOC_32_PLT_PCREL:
+ case BFD_RELOC_8_PLTOFF:
+ case BFD_RELOC_16_PLTOFF:
+ case BFD_RELOC_32_PLTOFF:
+ return 0;
+
+ case BFD_RELOC_VTABLE_INHERIT:
+ case BFD_RELOC_VTABLE_ENTRY:
+ return 0;
+
+ default:
+ return 1;
+ }
+}
- beg_str = str;
+#else /* !OBJ_ELF */
- for (i = 1; i; ) {
- switch(*str++) {
- case '\0':
- opP->error="Missing )";
- return(FAIL);
- case ',': i=0; break;
- case '(': i++; break;
- case ')': --i; break;
- }
- }
+#define get_reloc_code(SIZE,PCREL,OTHER) NO_RELOC
- opP->con2=add_exp(beg_str,str-2);
+#define relaxable_symbol(symbol) 1
- if (str[-1] == ',') {
- if (opP->ireg != FAIL) {
- opP->error = "Can't have two index regs";
- return(FAIL);
- }
+#endif /* OBJ_ELF */
- i = try_index(&str, opP);
+#ifdef BFD_ASSEMBLER
- if (i == FAIL) {
- opP->error = "malformed index reg";
- return(FAIL);
- }
+arelent *
+tc_gen_reloc (section, fixp)
+ asection *section;
+ fixS *fixp;
+{
+ arelent *reloc;
+ bfd_reloc_code_real_type code;
+
+ /* If the tcbit is set, then this was a fixup of a negative value
+ that was never resolved. We do not have a reloc to handle this,
+ so just return. We assume that other code will have detected this
+ situation and produced a helpful error message, so we just tell the
+ user that the reloc cannot be produced. */
+ if (fixp->fx_tcbit)
+ {
+ if (fixp->fx_addsy)
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("Unable to produce reloc against symbol '%s'"),
+ S_GET_NAME (fixp->fx_addsy));
+ return NULL;
+ }
- opP->mode = APODX;
- } else if (opP->ireg != FAIL) {
- opP->mode = APRDX;
- } else {
- opP->mode = AMIND;
- }
- } else {
- opP->mode = APODX;
+ if (fixp->fx_r_type != BFD_RELOC_NONE)
+ {
+ code = fixp->fx_r_type;
+
+ /* Since DIFF_EXPR_OK is defined in tc-m68k.h, it is possible
+ that fixup_segment converted a non-PC relative reloc into a
+ PC relative reloc. In such a case, we need to convert the
+ reloc code. */
+ if (fixp->fx_pcrel)
+ {
+ switch (code)
+ {
+ case BFD_RELOC_8:
+ code = BFD_RELOC_8_PCREL;
+ break;
+ case BFD_RELOC_16:
+ code = BFD_RELOC_16_PCREL;
+ break;
+ case BFD_RELOC_32:
+ code = BFD_RELOC_32_PCREL;
+ break;
+ case BFD_RELOC_8_PCREL:
+ case BFD_RELOC_16_PCREL:
+ case BFD_RELOC_32_PCREL:
+ case BFD_RELOC_8_GOT_PCREL:
+ case BFD_RELOC_16_GOT_PCREL:
+ case BFD_RELOC_32_GOT_PCREL:
+ case BFD_RELOC_8_GOTOFF:
+ case BFD_RELOC_16_GOTOFF:
+ case BFD_RELOC_32_GOTOFF:
+ case BFD_RELOC_8_PLT_PCREL:
+ case BFD_RELOC_16_PLT_PCREL:
+ case BFD_RELOC_32_PLT_PCREL:
+ case BFD_RELOC_8_PLTOFF:
+ case BFD_RELOC_16_PLTOFF:
+ case BFD_RELOC_32_PLTOFF:
+ break;
+ default:
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("Cannot make %s relocation PC relative"),
+ bfd_get_reloc_code_name (code));
+ }
}
-
- if(*str!='\0') {
- opP->error="Junk after indirect";
- return FAIL;
+ }
+ else
+ {
+#define F(SZ,PCREL) (((SZ) << 1) + (PCREL))
+ switch (F (fixp->fx_size, fixp->fx_pcrel))
+ {
+#define MAP(SZ,PCREL,TYPE) case F(SZ,PCREL): code = (TYPE); break
+ MAP (1, 0, BFD_RELOC_8);
+ MAP (2, 0, BFD_RELOC_16);
+ MAP (4, 0, BFD_RELOC_32);
+ MAP (1, 1, BFD_RELOC_8_PCREL);
+ MAP (2, 1, BFD_RELOC_16_PCREL);
+ MAP (4, 1, BFD_RELOC_32_PCREL);
+ default:
+ abort ();
}
- return(OK);
-} /* m68k_ip_op() */
+ }
+#undef F
+#undef MAP
+
+ reloc = (arelent *) xmalloc (sizeof (arelent));
+ reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
+ reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
+#ifndef OBJ_ELF
+ if (fixp->fx_pcrel)
+ reloc->addend = fixp->fx_addnumber;
+ else
+ reloc->addend = 0;
+#else
+ if (!fixp->fx_pcrel)
+ reloc->addend = fixp->fx_addnumber;
+ else
+ reloc->addend = (section->vma
+ /* Explicit sign extension in case char is
+ unsigned. */
+ + ((fixp->fx_pcrel_adjust & 0xff) ^ 0x80) - 0x80
+ + fixp->fx_addnumber
+ + md_pcrel_from (fixp));
+#endif
-/*
- *
- * try_index := data_or_address_register + ')' + SKIP_W
- * | data_or_address_register + ':' + SKIP_W + size_spec + SKIP_W + multiplier + ')' + SKIP_W
- *
- * multiplier := <empty>
- * | ':' + multiplier_number
- * ;
- *
- * multiplier_number := '1' | '2' | '4' | '8' ;
- *
- * size_spec := 'l' | 'L' | 'w' | 'W' ;
- *
- * SKIP_W := <empty> | ' ' ;
- *
- */
+ reloc->howto = bfd_reloc_type_lookup (stdoutput, code);
+ assert (reloc->howto != 0);
-static int try_index(s,opP)
-char **s;
-struct m68k_op *opP;
-{
- register int i;
- char *ss;
-#define SKIP_W() { ss++; if (*ss==' ') ss++;}
+ return reloc;
+}
- ss= *s;
- /* SKIP_W(); */
- i=m68k_reg_parse(&ss);
- if(!(i>=DATA+0 && i<=ADDR+7)) { /* if i is not DATA or ADDR reg */
- *s=ss;
- return FAIL;
- }
- opP->ireg=i;
- /* SKIP_W(); */
- if(*ss==')') {
- opP->isiz=0;
- opP->imul=1;
- SKIP_W();
- *s=ss;
- return OK;
- }
- if(*ss!=':') {
- opP->error="Missing : in index register";
- *s=ss;
- return FAIL;
- }
- SKIP_W();
- switch(*ss) {
- case 'w':
- case 'W':
- opP->isiz=2;
- break;
- case 'l':
- case 'L':
- opP->isiz=3;
- break;
- default:
- opP->error="Index register size spec not :w or :l";
- *s=ss;
- return FAIL;
- }
- SKIP_W();
- if(*ss==':') {
- SKIP_W();
- switch(*ss) {
- case '1':
- case '2':
- case '4':
- case '8':
- opP->imul= *ss-'0';
- break;
- default:
- opP->error="index multiplier not 1, 2, 4 or 8";
- *s=ss;
- return FAIL;
- }
- SKIP_W();
- } else opP->imul=1;
- if(*ss!=')') {
- opP->error="Missing )";
- *s=ss;
- return FAIL;
- }
- SKIP_W();
- *s=ss;
- return OK;
-} /* try_index() */
-
-#ifdef TEST1 /* TEST1 tests m68k_ip_op(), which parses operands */
-main()
-{
- char buf[128];
- struct m68k_op thark;
-
- for(;;) {
- if(!gets(buf))
- break;
- bzero(&thark,sizeof(thark));
- if(!m68k_ip_op(buf,&thark)) printf("FAIL:");
- if(thark.error)
- printf("op1 error %s in %s\n",thark.error,buf);
- printf("mode %d, reg %d, ",thark.mode,thark.reg);
- if(thark.b_const)
- printf("Constant: '%.*s',",1+thark.e_const-thark.b_const,thark.b_const);
- printf("ireg %d, isiz %d, imul %d ",thark.ireg,thark.isiz,thark.imul);
- if(thark.b_iadd)
- printf("Iadd: '%.*s'",1+thark.e_iadd-thark.b_iadd,thark.b_iadd);
- printf("\n");
- }
- exit(0);
-}
+#endif /* BFD_ASSEMBLER */
-#endif
+/* Handle of the OPCODE hash table. NULL means any use before
+ m68k_ip_begin() will crash. */
+static struct hash_control *op_hash;
+\f
+/* Assemble an m68k instruction. */
+static void
+m68k_ip (instring)
+ char *instring;
+{
+ register char *p;
+ register struct m68k_op *opP;
+ register const struct m68k_incant *opcode;
+ register const char *s;
+ register int tmpreg = 0, baseo = 0, outro = 0, nextword;
+ char *pdot, *pdotmove;
+ enum m68k_size siz1, siz2;
+ char c;
+ int losing;
+ int opsfound;
+ LITTLENUM_TYPE words[6];
+ LITTLENUM_TYPE *wordp;
+ unsigned long ok_arch = 0;
+
+ if (*instring == ' ')
+ instring++; /* skip leading whitespace */
+
+ /* Scan up to end of operation-code, which MUST end in end-of-string
+ or exactly 1 space. */
+ pdot = 0;
+ for (p = instring; *p != '\0'; p++)
+ {
+ if (*p == ' ')
+ break;
+ if (*p == '.')
+ pdot = p;
+ }
-static struct hash_control* op_hash = NULL; /* handle of the OPCODE hash table
- NULL means any use before m68k_ip_begin()
- will crash */
+ if (p == instring)
+ {
+ the_ins.error = _("No operator");
+ return;
+ }
-\f
-/*
- * m 6 8 k _ i p ( )
- *
- * This converts a string into a 68k instruction.
- * The string must be a bare single instruction in sun format
- * with RMS-style 68020 indirects
- * (example: )
- *
- * It provides some error messages: at most one fatal error message (which
- * stops the scan) and at most one warning message for each operand.
- * The 68k instruction is returned in exploded form, since we have no
- * knowledge of how you parse (or evaluate) your expressions.
- * We do however strip off and decode addressing modes and operation
- * mnemonic.
- *
- * This function's value is a string. If it is not "" then an internal
- * logic error was found: read this code to assign meaning to the string.
- * No argument string should generate such an error string:
- * it means a bug in our code, not in the user's text.
- *
- * You MUST have called m68k_ip_begin() once and m86_ip_end() never before using
- * this function.
- */
+ /* p now points to the end of the opcode name, probably whitespace.
+ Make sure the name is null terminated by clobbering the
+ whitespace, look it up in the hash table, then fix it back.
+ Remove a dot, first, since the opcode tables have none. */
+ if (pdot != NULL)
+ {
+ for (pdotmove = pdot; pdotmove < p; pdotmove++)
+ *pdotmove = pdotmove[1];
+ p--;
+ }
-/* JF this function no longer returns a useful value. Sorry */
-void m68k_ip (instring)
-char *instring;
-{
- register char *p;
- register struct m68k_op *opP;
- register struct m68k_incant *opcode;
- register char *s;
- register int tmpreg = 0,
- baseo = 0,
- outro = 0,
- nextword;
- int siz1,
- siz2;
- char c;
- int losing;
- int opsfound;
- char *crack_operand();
- LITTLENUM_TYPE words[6];
- LITTLENUM_TYPE *wordp;
-
- if (*instring == ' ')
- instring++; /* skip leading whitespace */
-
- /* Scan up to end of operation-code, which MUST end in end-of-string
- or exactly 1 space. */
- for (p = instring; *p != '\0'; p++)
- if (*p == ' ')
- break;
-
-
- if (p == instring) {
- the_ins.error = "No operator";
- the_ins.opcode[0] = NULL;
- /* the_ins.numo=1; */
- return;
- }
-
- /* p now points to the end of the opcode name, probably whitespace.
- make sure the name is null terminated by clobbering the whitespace,
- look it up in the hash table, then fix it back. */
- c = *p;
- *p = '\0';
- opcode = (struct m68k_incant *)hash_find (op_hash, instring);
- *p = c;
-
- if (opcode == NULL) {
- the_ins.error = "Unknown operator";
- the_ins.opcode[0] = NULL;
- /* the_ins.numo=1; */
- return;
- }
-
- /* found a legitimate opcode, start matching operands */
- while (*p == ' ') ++p;
-
- for(opP = &the_ins.operands[0]; *p; opP++) {
-
- p = crack_operand(p, opP);
-
- if (opP->error) {
- the_ins.error=opP->error;
- return;
- }
- }
-
- opsfound = opP - &the_ins.operands[0];
-
- /* This ugly hack is to support the floating pt opcodes in their standard form */
- /* Essentially, we fake a first enty of type COP#1 */
- if (opcode->m_operands[0]=='I') {
- int n;
-
- for(n=opsfound;n>0;--n)
- the_ins.operands[n]=the_ins.operands[n-1];
-
- /* bcopy((char *)(&the_ins.operands[0]),(char *)(&the_ins.operands[1]),opsfound*sizeof(the_ins.operands[0])); */
- bzero((char *)(&the_ins.operands[0]),sizeof(the_ins.operands[0]));
- the_ins.operands[0].mode=MSCR;
- the_ins.operands[0].reg=COPNUM; /* COP #1 */
- opsfound++;
- }
-
- /* We've got the operands. Find an opcode that'll accept them */
- for (losing = 0; ; ) {
- /* if we didn't get the right number of ops,
- or we have no common model with this pattern
- then reject this pattern. */
-
- if (opsfound != opcode->m_opnum
- || ((opcode->m_arch & current_architecture) == 0)) {
-
- ++losing;
-
- } else {
- for (s=opcode->m_operands, opP = &the_ins.operands[0]; *s && !losing; s += 2, opP++) {
- /* Warning: this switch is huge! */
- /* I've tried to organize the cases into this order:
- non-alpha first, then alpha by letter. lower-case goes directly
- before uppercase counterpart. */
- /* Code with multiple case ...: gets sorted by the lowest case ...
- it belongs to. I hope this makes sense. */
- switch(*s) {
- case '!':
- if (opP->mode == MSCR || opP->mode == IMMED
- || opP->mode == DREG || opP->mode == AREG
- || opP->mode == AINC || opP->mode == ADEC
- || opP->mode == REGLST)
- losing++;
- break;
-
- case '#':
- if(opP->mode!=IMMED)
- losing++;
- else {
- long t;
-
- t=get_num(opP->con1,80);
- if(s[1]=='b' && !isbyte(t))
- losing++;
- else if(s[1]=='w' && !isword(t))
- losing++;
- }
- break;
-
- case '^':
- case 'T':
- if(opP->mode!=IMMED)
- losing++;
- break;
-
- case '$':
- if(opP->mode==MSCR || opP->mode==AREG ||
- opP->mode==IMMED || opP->reg==PC || opP->reg==ZPC || opP->mode==REGLST)
- losing++;
- break;
-
- case '%':
- if(opP->mode==MSCR || opP->reg==PC ||
- opP->reg==ZPC || opP->mode==REGLST)
- losing++;
- break;
-
-
- case '&':
- if(opP->mode==MSCR || opP->mode==DREG ||
- opP->mode==AREG || opP->mode==IMMED || opP->reg==PC || opP->reg==ZPC ||
- opP->mode==AINC || opP->mode==ADEC || opP->mode==REGLST)
- losing++;
- break;
-
- case '*':
- if(opP->mode==MSCR || opP->mode==REGLST)
- losing++;
- break;
-
- case '+':
- if(opP->mode!=AINC)
- losing++;
- break;
-
- case '-':
- if(opP->mode!=ADEC)
- losing++;
- break;
-
- case '/':
- if(opP->mode==MSCR || opP->mode==AREG ||
- opP->mode==AINC || opP->mode==ADEC || opP->mode==IMMED || opP->mode==REGLST)
- losing++;
- break;
-
- case ';':
- if(opP->mode==MSCR || opP->mode==AREG || opP->mode==REGLST)
- losing++;
- break;
-
- case '?':
- if(opP->mode==MSCR || opP->mode==AREG ||
- opP->mode==AINC || opP->mode==ADEC || opP->mode==IMMED || opP->reg==PC ||
- opP->reg==ZPC || opP->mode==REGLST)
- losing++;
- break;
-
- case '@':
- if(opP->mode==MSCR || opP->mode==AREG ||
- opP->mode==IMMED || opP->mode==REGLST)
- losing++;
- break;
-
- case '~': /* For now! (JF FOO is this right?) */
- if(opP->mode==MSCR || opP->mode==DREG ||
- opP->mode==AREG || opP->mode==IMMED || opP->reg==PC || opP->reg==ZPC || opP->mode==REGLST)
- losing++;
- break;
-
- case 'A':
- if(opP->mode!=AREG)
- losing++;
- break;
- case 'a':
- if (opP->mode != AINDR) {
- ++losing;
- } /* if not address register indirect */
- break;
- case 'B': /* FOO */
- if(opP->mode!=ABSL || (flagseen['S'] && instring[0] == 'j'
- && instring[1] == 'b'
- && instring[2] == 's'
- && instring[3] == 'r'))
- losing++;
- break;
-
- case 'C':
- if(opP->mode!=MSCR || opP->reg!=CCR)
- losing++;
- break;
-
- case 'd': /* FOO This mode is a KLUDGE!! */
- if(opP->mode!=AOFF && (opP->mode!=ABSL ||
- opP->con1->e_beg[0]!='(' || opP->con1->e_end[0]!=')'))
- losing++;
- break;
-
- case 'D':
- if(opP->mode!=DREG)
- losing++;
- break;
-
- case 'F':
- if(opP->mode!=MSCR || opP->reg<(FPREG+0) || opP->reg>(FPREG+7))
- losing++;
- break;
-
- case 'I':
- if(opP->mode!=MSCR || opP->reg<COPNUM ||
- opP->reg>=COPNUM+7)
- losing++;
- break;
-
- case 'J':
- if (opP->mode != MSCR
- || opP->reg < USP
- || opP->reg > URP
- || cpu_of_arch(current_architecture) < m68010 /* before 68010 had none */
- || (cpu_of_arch(current_architecture) < m68020
- && opP->reg != SFC
- && opP->reg != DFC
- && opP->reg != USP
- && opP->reg != VBR) /* 68010's had only these */
- || (cpu_of_arch(current_architecture) < m68040
- && opP->reg != SFC
- && opP->reg != DFC
- && opP->reg != USP
- && opP->reg != VBR
- && opP->reg != CACR
- && opP->reg != CAAR
- && opP->reg != MSP
- && opP->reg != ISP) /* 680[23]0's have only these */
- || (cpu_of_arch(current_architecture) == m68040 /* 68040 has all but this */
- && opP->reg == CAAR)) {
- losing++;
- } /* doesn't cut it */
- break;
-
- case 'k':
- if(opP->mode!=IMMED)
- losing++;
- break;
-
- case 'l':
- case 'L':
- if(opP->mode==DREG || opP->mode==AREG || opP->mode==FPREG) {
- if(s[1]=='8')
- losing++;
- else {
- opP->mode=REGLST;
- opP->reg=1<<(opP->reg-DATA);
- }
- } else if(opP->mode!=REGLST) {
- losing++;
- } else if(s[1]=='8' && opP->reg&0x0FFffFF)
- losing++;
- else if(s[1]=='3' && opP->reg&0x7000000)
- losing++;
- break;
-
- case 'M':
- if(opP->mode!=IMMED)
- losing++;
- else {
- long t;
-
- t=get_num(opP->con1,80);
- if(!issbyte(t) || isvar(opP->con1))
- losing++;
- }
- break;
-
- case 'O':
- if(opP->mode!=DREG && opP->mode!=IMMED)
- losing++;
- break;
-
- case 'Q':
- if(opP->mode!=IMMED)
- losing++;
- else {
- long t;
-
- t=get_num(opP->con1,80);
- if(t<1 || t>8 || isvar(opP->con1))
- losing++;
- }
- break;
-
- case 'R':
- if(opP->mode!=DREG && opP->mode!=AREG)
- losing++;
- break;
-
- case 's':
- if(opP->mode!=MSCR || !(opP->reg==FPI || opP->reg==FPS || opP->reg==FPC))
- losing++;
- break;
-
- case 'S':
- if(opP->mode!=MSCR || opP->reg!=SR)
- losing++;
- break;
-
- case 'U':
- if(opP->mode!=MSCR || opP->reg!=USP)
- losing++;
- break;
-
- /* JF these are out of order. We could put them
- in order if we were willing to put up with
- bunches of #ifdef m68851s in the code */
-#ifndef NO_68851
- /* Memory addressing mode used by pflushr */
- case '|':
- if(opP->mode==MSCR || opP->mode==DREG ||
- opP->mode==AREG || opP->mode==REGLST)
- losing++;
- break;
-
- case 'f':
- if (opP->mode != MSCR || (opP->reg != SFC && opP->reg != DFC))
- losing++;
- break;
-
- case 'P':
- if (opP->mode != MSCR || (opP->reg != TC && opP->reg != CAL &&
- opP->reg != VAL && opP->reg != SCC && opP->reg != AC))
- losing++;
- break;
-
- case 'V':
- if (opP->reg != VAL)
- losing++;
- break;
-
- case 'W':
- if (opP->mode != MSCR || (opP->reg != DRP && opP->reg != SRP &&
- opP->reg != CRP))
- losing++;
- break;
-
- case 'X':
- if (opP->mode != MSCR ||
- (!(opP->reg >= BAD && opP->reg <= BAD+7) &&
- !(opP->reg >= BAC && opP->reg <= BAC+7)))
- losing++;
- break;
-
- case 'Y':
- if (opP->reg != PSR)
- losing++;
- break;
-
- case 'Z':
- if (opP->reg != PCSR)
- losing++;
- break;
-#endif
- case 'c':
- if (opP->reg != NC
- && opP->reg != IC
- && opP->reg != DC
- && opP->reg != BC) {
- losing++;
- } /* not a cache specifier. */
- break;
-
- case '_':
- if (opP->mode != ABSL) {
- ++losing;
- } /* not absolute */
- break;
-
- default:
- as_fatal("Internal error: Operand mode %c unknown in line %s of file \"%s\"",
- *s, __LINE__, __FILE__);
- } /* switch on type of operand */
-
- if (losing) break;
- } /* for each operand */
- } /* if immediately wrong */
-
- if (!losing) {
- break;
- } /* got it. */
-
- opcode = opcode->m_next;
-
- if (!opcode) {
- the_ins.error = "instruction/operands mismatch";
- return;
- } /* Fell off the end */
-
- losing = 0;
+ c = *p;
+ *p = '\0';
+ opcode = (const struct m68k_incant *) hash_find (op_hash, instring);
+ *p = c;
+
+ if (pdot != NULL)
+ {
+ for (pdotmove = p; pdotmove > pdot; pdotmove--)
+ *pdotmove = pdotmove[-1];
+ *pdot = '.';
+ ++p;
+ }
+
+ if (opcode == NULL)
+ {
+ the_ins.error = _("Unknown operator");
+ return;
+ }
+
+ /* found a legitimate opcode, start matching operands */
+ while (*p == ' ')
+ ++p;
+
+ if (opcode->m_operands == 0)
+ {
+ char *old = input_line_pointer;
+ *old = '\n';
+ input_line_pointer = p;
+ /* Ahh - it's a motorola style psuedo op */
+ mote_pseudo_table[opcode->m_opnum].poc_handler
+ (mote_pseudo_table[opcode->m_opnum].poc_val);
+ input_line_pointer = old;
+ *old = 0;
+
+ return;
+ }
+
+ if (flag_mri && opcode->m_opnum == 0)
+ {
+ /* In MRI mode, random garbage is allowed after an instruction
+ which accepts no operands. */
+ the_ins.args = opcode->m_operands;
+ the_ins.numargs = opcode->m_opnum;
+ the_ins.numo = opcode->m_codenum;
+ the_ins.opcode[0] = getone (opcode);
+ the_ins.opcode[1] = gettwo (opcode);
+ return;
+ }
+
+ for (opP = &the_ins.operands[0]; *p; opP++)
+ {
+ p = crack_operand (p, opP);
+
+ if (opP->error)
+ {
+ the_ins.error = opP->error;
+ return;
}
-
- /* now assemble it */
-
- the_ins.args=opcode->m_operands;
- the_ins.numargs=opcode->m_opnum;
- the_ins.numo=opcode->m_codenum;
- the_ins.opcode[0]=getone(opcode);
- the_ins.opcode[1]=gettwo(opcode);
-
- for (s = the_ins.args, opP = &the_ins.operands[0]; *s; s += 2, opP++) {
- /* This switch is a doozy.
- Watch the first step; its a big one! */
- switch(s[0]) {
-
- case '*':
- case '~':
- case '%':
- case ';':
- case '@':
+ }
+
+ opsfound = opP - &the_ins.operands[0];
+
+ /* This ugly hack is to support the floating pt opcodes in their
+ standard form. Essentially, we fake a first enty of type COP#1 */
+ if (opcode->m_operands[0] == 'I')
+ {
+ int n;
+
+ for (n = opsfound; n > 0; --n)
+ the_ins.operands[n] = the_ins.operands[n - 1];
+
+ memset ((char *) (&the_ins.operands[0]), '\0',
+ sizeof (the_ins.operands[0]));
+ the_ins.operands[0].mode = CONTROL;
+ the_ins.operands[0].reg = m68k_float_copnum;
+ opsfound++;
+ }
+
+ /* We've got the operands. Find an opcode that'll accept them */
+ for (losing = 0;;)
+ {
+ /* If we didn't get the right number of ops, or we have no
+ common model with this pattern then reject this pattern. */
+
+ ok_arch |= opcode->m_arch;
+ if (opsfound != opcode->m_opnum
+ || ((opcode->m_arch & current_architecture) == 0))
+ ++losing;
+ else
+ {
+ for (s = opcode->m_operands, opP = &the_ins.operands[0];
+ *s && !losing;
+ s += 2, opP++)
+ {
+ /* Warning: this switch is huge! */
+ /* I've tried to organize the cases into this order:
+ non-alpha first, then alpha by letter. Lower-case
+ goes directly before uppercase counterpart. */
+ /* Code with multiple case ...: gets sorted by the lowest
+ case ... it belongs to. I hope this makes sense. */
+ switch (*s)
+ {
case '!':
- case '&':
- case '$':
- case '?':
- case '/':
-#ifndef NO_68851
- case '|':
-#endif
- switch(opP->mode) {
- case IMMED:
- tmpreg=0x3c; /* 7.4 */
- if (strchr("bwl",s[1])) nextword=get_num(opP->con1,80);
- else nextword=nextword=get_num(opP->con1,0);
- if(isvar(opP->con1))
- add_fix(s[1],opP->con1,0);
- switch(s[1]) {
- case 'b':
- if(!isbyte(nextword))
- opP->error="operand out of range";
- addword(nextword);
- baseo=0;
- break;
- case 'w':
- if(!isword(nextword))
- opP->error="operand out of range";
- addword(nextword);
- baseo=0;
- break;
- case 'l':
- addword(nextword>>16);
- addword(nextword);
- baseo=0;
- break;
-
- case 'f':
- baseo=2;
- outro=8;
- break;
- case 'F':
- baseo=4;
- outro=11;
- break;
- case 'x':
- baseo=6;
- outro=15;
- break;
- case 'p':
- baseo=6;
- outro= -1;
- break;
- default:
- as_fatal("Internal error: Can't decode %c%c in line %s of file \"%s\"",
- *s, s[1], __LINE__, __FILE__);
- }
- if(!baseo)
- break;
-
- /* We gotta put out some float */
- if(seg(opP->con1)!=SEG_BIG) {
- int_to_gen(nextword);
- gen_to_words(words,baseo,(long int)outro);
- for(wordp=words;baseo--;wordp++)
- addword(*wordp);
- break;
- } /* Its BIG */
- if(offs(opP->con1)>0) {
- as_warn("Bignum assumed to be binary bit-pattern");
- if(offs(opP->con1)>baseo) {
- as_warn("Bignum too big for %c format; truncated",s[1]);
- offs(opP->con1)=baseo;
- }
- baseo-=offs(opP->con1);
- for(wordp=generic_bignum+offs(opP->con1)-1;offs(opP->con1)--;--wordp)
- addword(*wordp);
- while(baseo--)
- addword(0);
- break;
- }
- gen_to_words(words,baseo,(long)outro);
- for (wordp=words;baseo--;wordp++)
- addword(*wordp);
- break;
- case DREG:
- tmpreg=opP->reg-DATA; /* 0.dreg */
- break;
- case AREG:
- tmpreg=0x08+opP->reg-ADDR; /* 1.areg */
- break;
- case AINDR:
- tmpreg=0x10+opP->reg-ADDR; /* 2.areg */
- break;
- case ADEC:
- tmpreg=0x20+opP->reg-ADDR; /* 4.areg */
- break;
- case AINC:
- tmpreg=0x18+opP->reg-ADDR; /* 3.areg */
- break;
- case AOFF:
-
- nextword=get_num(opP->con1,80);
- /* Force into index mode. Hope this works */
-
- /* We do the first bit for 32-bit displacements,
- and the second bit for 16 bit ones. It is
- possible that we should make the default be
- WORD instead of LONG, but I think that'd
- break GCC, so we put up with a little
- inefficiency for the sake of working output.
- */
-
- if( !issword(nextword)
- || ( isvar(opP->con1)
- && ( ( opP->con1->e_siz==0
- && flagseen['l']==0)
- || opP->con1->e_siz==3))) {
-
- if(opP->reg==PC)
- tmpreg=0x3B; /* 7.3 */
- else
- tmpreg=0x30+opP->reg-ADDR; /* 6.areg */
- if(isvar(opP->con1)) {
- if(opP->reg==PC) {
- add_frag(adds(opP->con1),
- offs(opP->con1),
- TAB(PCLEA,SZ_UNDEF));
- break;
- } else {
- addword(0x0170);
- add_fix('l',opP->con1,1);
- }
- } else
- addword(0x0170);
- addword(nextword>>16);
- } else {
- if(opP->reg==PC)
- tmpreg=0x3A; /* 7.2 */
- else
- tmpreg=0x28+opP->reg-ADDR; /* 5.areg */
-
- if(isvar(opP->con1)) {
- if(opP->reg==PC) {
- add_fix('w',opP->con1,1);
- } else
- add_fix('w',opP->con1,0);
- }
- }
- addword(nextword);
- break;
-
- case APODX:
- case AMIND:
- case APRDX:
- know(current_architecture & m68020up);
- /* intentional fall-through */
- case AINDX:
- nextword=0;
- baseo=get_num(opP->con1,80);
- outro=get_num(opP->con2,80);
- /* Figure out the 'addressing mode' */
- /* Also turn on the BASE_DISABLE bit, if needed */
- if(opP->reg==PC || opP->reg==ZPC) {
- tmpreg=0x3b; /* 7.3 */
- if(opP->reg==ZPC)
- nextword|=0x80;
- } else if(opP->reg==FAIL) {
- nextword|=0x80;
- tmpreg=0x30; /* 6.garbage */
- } else tmpreg=0x30+opP->reg-ADDR; /* 6.areg */
-
- siz1= (opP->con1) ? opP->con1->e_siz : 0;
- siz2= (opP->con2) ? opP->con2->e_siz : 0;
-
- /* Index register stuff */
- if(opP->ireg>=DATA+0 && opP->ireg<=ADDR+7) {
- nextword|=(opP->ireg-DATA)<<12;
-
- if(opP->isiz==0 || opP->isiz==3)
- nextword|=0x800;
- switch(opP->imul) {
- case 1: break;
- case 2: nextword|=0x200; break;
- case 4: nextword|=0x400; break;
- case 8: nextword|=0x600; break;
- default: as_fatal("failed sanity check.");
- }
- /* IF its simple,
- GET US OUT OF HERE! */
-
- /* Must be INDEX, with an index
- register. Address register
- cannot be ZERO-PC, and either
- :b was forced, or we know
- it will fit */
- if( opP->mode==AINDX
- && opP->reg!=FAIL
- && opP->reg!=ZPC
- && ( siz1==1
- || ( issbyte(baseo)
- && !isvar(opP->con1)))) {
- nextword +=baseo&0xff;
- addword(nextword);
- if(isvar(opP->con1))
- add_fix('B',opP->con1,0);
- break;
- }
- } else
- nextword|=0x40; /* No index reg */
-
- /* It aint simple */
- nextword|=0x100;
- /* If the guy specified a width, we assume that
- it is wide enough. Maybe it isn't. If so, we lose
- */
- switch(siz1) {
- case 0:
- if(isvar(opP->con1) || !issword(baseo)) {
- siz1=3;
- nextword|=0x30;
- } else if(baseo==0)
- nextword|=0x10;
- else {
- nextword|=0x20;
- siz1=2;
- }
- break;
- case 1:
- as_warn("Byte dispacement won't work. Defaulting to :w");
- case 2:
- nextword|=0x20;
- break;
- case 3:
- nextword|=0x30;
- break;
- }
-
- /* Figure out innner displacement stuff */
- if(opP->mode!=AINDX) {
- switch(siz2) {
- case 0:
- if(isvar(opP->con2) || !issword(outro)) {
- siz2=3;
- nextword|=0x3;
- } else if(outro==0)
- nextword|=0x1;
- else {
- nextword|=0x2;
- siz2=2;
- }
- break;
- case 1:
- as_warn("Byte dispacement won't work. Defaulting to :w");
- case 2:
- nextword|=0x2;
- break;
- case 3:
- nextword|=0x3;
- break;
- }
- if(opP->mode==APODX) nextword|=0x04;
- else if(opP->mode==AMIND) nextword|=0x40;
- }
- addword(nextword);
-
- if(isvar(opP->con1)) {
- if(opP->reg==PC || opP->reg==ZPC) {
- add_fix(siz1==3 ? 'l' : 'w',opP->con1,1);
- opP->con1->e_exp.X_add_number+=6;
- } else
- add_fix(siz1==3 ? 'l' : 'w',opP->con1,0);
- }
- if(siz1==3)
- addword(baseo>>16);
- if(siz1)
- addword(baseo);
-
- if(isvar(opP->con2)) {
- if(opP->reg==PC || opP->reg==ZPC) {
- add_fix(siz2==3 ? 'l' : 'w',opP->con2,1);
- opP->con1->e_exp.X_add_number+=6;
- } else
- add_fix(siz2==3 ? 'l' : 'w',opP->con2,0);
- }
- if(siz2==3)
- addword(outro>>16);
- if(siz2)
- addword(outro);
-
- break;
-
- case ABSL:
- nextword=get_num(opP->con1,80);
- switch(opP->con1->e_siz) {
- default:
- as_warn("Unknown size for absolute reference");
- case 0:
- if(!isvar(opP->con1) && issword(offs(opP->con1))) {
- tmpreg=0x38; /* 7.0 */
- addword(nextword);
- break;
- }
- /* Don't generate pc relative code
- on 68010 and 68000 */
- if(isvar(opP->con1)
- && !subs(opP->con1)
- && seg(opP->con1) == SEG_TEXT
- && now_seg == SEG_TEXT
- && cpu_of_arch(current_architecture) < m68020
- && !flagseen['S']
- && !strchr("~%&$?", s[0])) {
- tmpreg=0x3A; /* 7.2 */
- add_frag(adds(opP->con1),
- offs(opP->con1),
- TAB(PCREL,SZ_UNDEF));
- break;
- }
- case 3: /* Fall through into long */
- if(isvar(opP->con1))
- add_fix('l',opP->con1,0);
-
- tmpreg=0x39; /* 7.1 mode */
- addword(nextword>>16);
- addword(nextword);
- break;
-
- case 2: /* Word */
- if(isvar(opP->con1))
- add_fix('w',opP->con1,0);
-
- tmpreg=0x38; /* 7.0 mode */
- addword(nextword);
- break;
- }
- break;
- case MSCR:
- default:
- as_bad("unknown/incorrect operand");
- /* abort(); */
- }
- install_gen_operand(s[1],tmpreg);
- break;
-
+ switch (opP->mode)
+ {
+ case IMMED:
+ case DREG:
+ case AREG:
+ case FPREG:
+ case CONTROL:
+ case AINC:
+ case ADEC:
+ case REGLST:
+ losing++;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case '<':
+ switch (opP->mode)
+ {
+ case DREG:
+ case AREG:
+ case FPREG:
+ case CONTROL:
+ case IMMED:
+ case ADEC:
+ case REGLST:
+ losing++;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case '>':
+ switch (opP->mode)
+ {
+ case DREG:
+ case AREG:
+ case FPREG:
+ case CONTROL:
+ case IMMED:
+ case AINC:
+ case REGLST:
+ losing++;
+ break;
+ case ABSL:
+ break;
+ default:
+ if (opP->reg == PC
+ || opP->reg == ZPC)
+ losing++;
+ break;
+ }
+ break;
+
+ case 'm':
+ switch (opP->mode)
+ {
+ case DREG:
+ case AREG:
+ case AINDR:
+ case AINC:
+ case ADEC:
+ break;
+ default:
+ losing++;
+ }
+ break;
+
+ case 'n':
+ switch (opP->mode)
+ {
+ case DISP:
+ break;
+ default:
+ losing++;
+ }
+ break;
+
+ case 'o':
+ switch (opP->mode)
+ {
+ case BASE:
+ case ABSL:
+ case IMMED:
+ break;
+ default:
+ losing++;
+ }
+ break;
+
+ case 'p':
+ switch (opP->mode)
+ {
+ case DREG:
+ case AREG:
+ case AINDR:
+ case AINC:
+ case ADEC:
+ break;
+ case DISP:
+ if (opP->reg == PC || opP->reg == ZPC)
+ losing++;
+ break;
+ default:
+ losing++;
+ }
+ break;
+
+ case 'q':
+ switch (opP->mode)
+ {
+ case DREG:
+ case AINDR:
+ case AINC:
+ case ADEC:
+ break;
+ case DISP:
+ if (opP->reg == PC || opP->reg == ZPC)
+ losing++;
+ break;
+ default:
+ losing++;
+ break;
+ }
+ break;
+
+ case 'v':
+ switch (opP->mode)
+ {
+ case DREG:
+ case AINDR:
+ case AINC:
+ case ADEC:
+ case ABSL:
+ break;
+ case DISP:
+ if (opP->reg == PC || opP->reg == ZPC)
+ losing++;
+ break;
+ default:
+ losing++;
+ break;
+ }
+ break;
+
case '#':
+ if (opP->mode != IMMED)
+ losing++;
+ else if (s[1] == 'b'
+ && ! isvar (&opP->disp)
+ && (opP->disp.exp.X_op != O_constant
+ || ! isbyte (opP->disp.exp.X_add_number)))
+ losing++;
+ else if (s[1] == 'B'
+ && ! isvar (&opP->disp)
+ && (opP->disp.exp.X_op != O_constant
+ || ! issbyte (opP->disp.exp.X_add_number)))
+ losing++;
+ else if (s[1] == 'w'
+ && ! isvar (&opP->disp)
+ && (opP->disp.exp.X_op != O_constant
+ || ! isword (opP->disp.exp.X_add_number)))
+ losing++;
+ else if (s[1] == 'W'
+ && ! isvar (&opP->disp)
+ && (opP->disp.exp.X_op != O_constant
+ || ! issword (opP->disp.exp.X_add_number)))
+ losing++;
+ break;
+
case '^':
- switch(s[1]) { /* JF: I hate floating point! */
- case 'j':
- tmpreg=70;
- break;
- case '8':
- tmpreg=20;
- break;
- case 'C':
- tmpreg=50;
- break;
- case '3':
- default:
- tmpreg=80;
- break;
- }
- tmpreg=get_num(opP->con1,tmpreg);
- if(isvar(opP->con1))
- add_fix(s[1],opP->con1,0);
- switch(s[1]) {
- case 'b': /* Danger: These do no check for
- certain types of overflow.
- user beware! */
- if(!isbyte(tmpreg))
- opP->error="out of range";
- insop(tmpreg);
- if(isvar(opP->con1))
- the_ins.reloc[the_ins.nrel-1].n=(opcode->m_codenum)*2;
- break;
- case 'w':
- if(!isword(tmpreg))
- opP->error="out of range";
- insop(tmpreg);
- if(isvar(opP->con1))
- the_ins.reloc[the_ins.nrel-1].n=(opcode->m_codenum)*2;
- break;
- case 'l':
- insop(tmpreg); /* Because of the way insop works, we put these two out backwards */
- insop(tmpreg>>16);
- if(isvar(opP->con1))
- the_ins.reloc[the_ins.nrel-1].n=(opcode->m_codenum)*2;
- break;
- case '3':
- tmpreg&=0xFF;
- case '8':
- case 'C':
- install_operand(s[1],tmpreg);
- break;
- default:
- as_fatal("Internal error: Unknown mode #%c in line %s of file \"%s\"", s[1], __LINE__, __FILE__);
- }
- break;
-
+ case 'T':
+ if (opP->mode != IMMED)
+ losing++;
+ break;
+
+ case '$':
+ if (opP->mode == AREG
+ || opP->mode == CONTROL
+ || opP->mode == FPREG
+ || opP->mode == IMMED
+ || opP->mode == REGLST
+ || (opP->mode != ABSL
+ && (opP->reg == PC
+ || opP->reg == ZPC)))
+ losing++;
+ break;
+
+ case '%':
+ if (opP->mode == CONTROL
+ || opP->mode == FPREG
+ || opP->mode == REGLST
+ || opP->mode == IMMED
+ || (opP->mode != ABSL
+ && (opP->reg == PC
+ || opP->reg == ZPC)))
+ losing++;
+ break;
+
+ case '&':
+ switch (opP->mode)
+ {
+ case DREG:
+ case AREG:
+ case FPREG:
+ case CONTROL:
+ case IMMED:
+ case AINC:
+ case ADEC:
+ case REGLST:
+ losing++;
+ break;
+ case ABSL:
+ break;
+ default:
+ if (opP->reg == PC
+ || opP->reg == ZPC)
+ losing++;
+ break;
+ }
+ break;
+
+ case '*':
+ if (opP->mode == CONTROL
+ || opP->mode == FPREG
+ || opP->mode == REGLST)
+ losing++;
+ break;
+
case '+':
+ if (opP->mode != AINC)
+ losing++;
+ break;
+
case '-':
+ if (opP->mode != ADEC)
+ losing++;
+ break;
+
+ case '/':
+ switch (opP->mode)
+ {
+ case AREG:
+ case CONTROL:
+ case FPREG:
+ case AINC:
+ case ADEC:
+ case IMMED:
+ case REGLST:
+ losing++;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case ';':
+ switch (opP->mode)
+ {
+ case AREG:
+ case CONTROL:
+ case FPREG:
+ case REGLST:
+ losing++;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case '?':
+ switch (opP->mode)
+ {
+ case AREG:
+ case CONTROL:
+ case FPREG:
+ case AINC:
+ case ADEC:
+ case IMMED:
+ case REGLST:
+ losing++;
+ break;
+ case ABSL:
+ break;
+ default:
+ if (opP->reg == PC || opP->reg == ZPC)
+ losing++;
+ break;
+ }
+ break;
+
+ case '@':
+ switch (opP->mode)
+ {
+ case AREG:
+ case CONTROL:
+ case FPREG:
+ case IMMED:
+ case REGLST:
+ losing++;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case '~': /* For now! (JF FOO is this right?) */
+ switch (opP->mode)
+ {
+ case DREG:
+ case AREG:
+ case CONTROL:
+ case FPREG:
+ case IMMED:
+ case REGLST:
+ losing++;
+ break;
+ case ABSL:
+ break;
+ default:
+ if (opP->reg == PC
+ || opP->reg == ZPC)
+ losing++;
+ break;
+ }
+ break;
+
+ case '3':
+ if (opP->mode != CONTROL
+ || (opP->reg != TT0 && opP->reg != TT1))
+ losing++;
+ break;
+
case 'A':
+ if (opP->mode != AREG)
+ losing++;
+ break;
+
case 'a':
- install_operand(s[1],opP->reg-ADDR);
- break;
-
- case 'B':
- tmpreg=get_num(opP->con1,80);
- switch(s[1]) {
- case 'B':
- /* Needs no offsetting */
- add_fix('B',opP->con1,1);
- break;
- case 'W':
- /* Offset the displacement to be relative to byte disp location */
- opP->con1->e_exp.X_add_number+=2;
- add_fix('w',opP->con1,1);
- addword(0);
- break;
- case 'L':
- long_branch:
- if (cpu_of_arch(current_architecture) < m68020) /* 68000 or 010 */
- as_warn("Can't use long branches on 68000/68010");
- the_ins.opcode[the_ins.numo-1]|=0xff;
- /* Offset the displacement to be relative to byte disp location */
- opP->con1->e_exp.X_add_number+=4;
- add_fix('l',opP->con1,1);
- addword(0);
- addword(0);
- break;
- case 'g':
- if(subs(opP->con1)) /* We can't relax it */
- goto long_branch;
-
- /* This could either be a symbol, or an
- absolute address. No matter, the
- frag hacking will finger it out.
- Not quite: it can't switch from
- BRANCH to BCC68000 for the case
- where opnd is absolute (it needs
- to use the 68000 hack since no
- conditional abs jumps). */
- if (((cpu_of_arch(current_architecture) < m68020) || (0==adds(opP->con1)))
- && (the_ins.opcode[0] >= 0x6200)
- && (the_ins.opcode[0] <= 0x6f00)) {
- add_frag(adds(opP->con1),offs(opP->con1),TAB(BCC68000,SZ_UNDEF));
- } else {
- add_frag(adds(opP->con1),offs(opP->con1),TAB(BRANCH,SZ_UNDEF));
- }
- break;
- case 'w':
- if(isvar(opP->con1)) {
- /* check for DBcc instruction */
- if ((the_ins.opcode[0] & 0xf0f8) ==0x50c8) {
- /* size varies if patch */
- /* needed for long form */
- add_frag(adds(opP->con1),offs(opP->con1),TAB(DBCC,SZ_UNDEF));
- break;
- }
-
- /* Don't ask! */
- opP->con1->e_exp.X_add_number+=2;
- add_fix('w',opP->con1,1);
- }
- addword(0);
- break;
- case 'C': /* Fixed size LONG coproc branches */
- the_ins.opcode[the_ins.numo-1]|=0x40;
- /* Offset the displacement to be relative to byte disp location */
- /* Coproc branches don't have a byte disp option, but they are
- compatible with the ordinary branches, which do... */
- opP->con1->e_exp.X_add_number+=4;
- add_fix('l',opP->con1,1);
- addword(0);
- addword(0);
- break;
- case 'c': /* Var size Coprocesssor branches */
- if(subs(opP->con1)) {
- add_fix('l',opP->con1,1);
- add_frag((symbolS *)0,(long)0,TAB(FBRANCH,LONG));
- } else if(adds(opP->con1)) {
- add_frag(adds(opP->con1),offs(opP->con1),TAB(FBRANCH,SZ_UNDEF));
- } else {
- /* add_frag((symbolS *)0,offs(opP->con1),TAB(FBRANCH,SHORT)); */
- the_ins.opcode[the_ins.numo-1]|=0x40;
- add_fix('l',opP->con1,1);
- addword(0);
- addword(4);
- }
- break;
- default:
- as_fatal("Internal error: operand type B%c unknown in line %s of file \"%s\"",
- s[1], __LINE__, __FILE__);
- }
- break;
-
- case 'C': /* Ignore it */
- break;
-
- case 'd': /* JF this is a kludge */
- if(opP->mode==AOFF) {
- install_operand('s',opP->reg-ADDR);
- } else {
- char *tmpP;
-
- tmpP=opP->con1->e_end-2;
- opP->con1->e_beg++;
- opP->con1->e_end-=4; /* point to the , */
- baseo=m68k_reg_parse(&tmpP);
- if(baseo<ADDR+0 || baseo>ADDR+7) {
- as_bad("Unknown address reg, using A0");
- baseo=0;
- } else baseo-=ADDR;
- install_operand('s',baseo);
- }
- tmpreg=get_num(opP->con1,80);
- if(!issword(tmpreg)) {
- as_warn("Expression out of range, using 0");
- tmpreg=0;
- }
- addword(tmpreg);
- break;
-
+ if (opP->mode != AINDR)
+ ++losing;
+ break;
+
+ case 'B': /* FOO */
+ if (opP->mode != ABSL
+ || (flag_long_jumps
+ && strncmp (instring, "jbsr", 4) == 0))
+ losing++;
+ break;
+
+ case 'C':
+ if (opP->mode != CONTROL || opP->reg != CCR)
+ losing++;
+ break;
+
+ case 'd':
+ if (opP->mode != DISP
+ || opP->reg < ADDR0
+ || opP->reg > ADDR7)
+ losing++;
+ break;
+
case 'D':
- install_operand(s[1],opP->reg-DATA);
- break;
-
+ if (opP->mode != DREG)
+ losing++;
+ break;
+
+ case 'E':
+ if (opP->reg != ACC)
+ losing++;
+ break;
+
case 'F':
- install_operand(s[1],opP->reg-FPREG);
- break;
-
+ if (opP->mode != FPREG)
+ losing++;
+ break;
+
+ case 'G':
+ if (opP->reg != MACSR)
+ losing++;
+ break;
+
+ case 'H':
+ if (opP->reg != MASK)
+ losing++;
+ break;
+
case 'I':
- tmpreg=1+opP->reg-COPNUM;
- if(tmpreg==8)
- tmpreg=0;
- install_operand(s[1],tmpreg);
- break;
-
- case 'J': /* JF foo */
- switch(opP->reg) {
- case SFC: tmpreg=0x000; break;
- case DFC: tmpreg=0x001; break;
- case CACR: tmpreg=0x002; break;
- case TC: tmpreg=0x003; break;
- case ITT0: tmpreg=0x004; break;
- case ITT1: tmpreg=0x005; break;
- case DTT0: tmpreg=0x006; break;
- case DTT1: tmpreg=0x007; break;
-
- case USP: tmpreg=0x800; break;
- case VBR: tmpreg=0x801; break;
- case CAAR: tmpreg=0x802; break;
- case MSP: tmpreg=0x803; break;
- case ISP: tmpreg=0x804; break;
- case MMUSR: tmpreg=0x805; break;
- case URP: tmpreg=0x806; break;
- case SRP: tmpreg=0x807; break;
- default:
- as_fatal("failed sanity check.");
- }
- install_operand(s[1],tmpreg);
- break;
-
+ if (opP->mode != CONTROL
+ || opP->reg < COP0
+ || opP->reg > COP7)
+ losing++;
+ break;
+
+ case 'J':
+ if (opP->mode != CONTROL
+ || opP->reg < USP
+ || opP->reg > last_movec_reg)
+ losing++;
+ else
+ {
+ const enum m68k_register *rp;
+ for (rp = control_regs; *rp; rp++)
+ if (*rp == opP->reg)
+ break;
+ if (*rp == 0)
+ losing++;
+ }
+ break;
+
case 'k':
- tmpreg=get_num(opP->con1,55);
- install_operand(s[1],tmpreg&0x7f);
- break;
-
+ if (opP->mode != IMMED)
+ losing++;
+ break;
+
case 'l':
- tmpreg=opP->reg;
- if(s[1]=='w') {
- if(tmpreg&0x7FF0000)
- as_bad("Floating point register in register list");
- insop(reverse_16_bits(tmpreg));
- } else {
- if(tmpreg&0x700FFFF)
- as_bad("Wrong register in floating-point reglist");
- install_operand(s[1],reverse_8_bits(tmpreg>>16));
- }
- break;
-
case 'L':
- tmpreg=opP->reg;
- if(s[1]=='w') {
- if(tmpreg&0x7FF0000)
- as_bad("Floating point register in register list");
- insop(tmpreg);
- } else if(s[1]=='8') {
- if(tmpreg&0x0FFFFFF)
- as_bad("incorrect register in reglist");
- install_operand(s[1],tmpreg>>24);
- } else {
- if(tmpreg&0x700FFFF)
- as_bad("wrong register in floating-point reglist");
- else
- install_operand(s[1],tmpreg>>16);
+ if (opP->mode == DREG
+ || opP->mode == AREG
+ || opP->mode == FPREG)
+ {
+ if (s[1] == '8')
+ losing++;
+ else
+ {
+ switch (opP->mode)
+ {
+ case DREG:
+ opP->mask = 1 << (opP->reg - DATA0);
+ break;
+ case AREG:
+ opP->mask = 1 << (opP->reg - ADDR0 + 8);
+ break;
+ case FPREG:
+ opP->mask = 1 << (opP->reg - FP0 + 16);
+ break;
+ default:
+ abort ();
+ }
+ opP->mode = REGLST;
+ }
+ }
+ else if (opP->mode == CONTROL)
+ {
+ if (s[1] != '8')
+ losing++;
+ else
+ {
+ switch (opP->reg)
+ {
+ case FPI:
+ opP->mask = 1 << 24;
+ break;
+ case FPS:
+ opP->mask = 1 << 25;
+ break;
+ case FPC:
+ opP->mask = 1 << 26;
+ break;
+ default:
+ losing++;
+ break;
+ }
+ opP->mode = REGLST;
}
- break;
-
+ }
+ else if (opP->mode != REGLST)
+ losing++;
+ else if (s[1] == '8' && (opP->mask & 0x0ffffff) != 0)
+ losing++;
+ else if (s[1] == '3' && (opP->mask & 0x7000000) != 0)
+ losing++;
+ break;
+
case 'M':
- install_operand(s[1],get_num(opP->con1,60));
- break;
-
+ if (opP->mode != IMMED)
+ losing++;
+ else if (opP->disp.exp.X_op != O_constant
+ || ! issbyte (opP->disp.exp.X_add_number))
+ losing++;
+ else if (! m68k_quick
+ && instring[3] != 'q'
+ && instring[4] != 'q')
+ losing++;
+ break;
+
case 'O':
- tmpreg= (opP->mode==DREG)
- ? 0x20+opP->reg-DATA
- : (get_num(opP->con1,40)&0x1F);
- install_operand(s[1],tmpreg);
- break;
-
+ if (opP->mode != DREG
+ && opP->mode != IMMED
+ && opP->mode != ABSL)
+ losing++;
+ break;
+
case 'Q':
- tmpreg=get_num(opP->con1,10);
- if(tmpreg==8)
- tmpreg=0;
- install_operand(s[1],tmpreg);
- break;
-
+ if (opP->mode != IMMED)
+ losing++;
+ else if (opP->disp.exp.X_op != O_constant
+ || opP->disp.exp.X_add_number < 1
+ || opP->disp.exp.X_add_number > 8)
+ losing++;
+ else if (! m68k_quick
+ && (strncmp (instring, "add", 3) == 0
+ || strncmp (instring, "sub", 3) == 0)
+ && instring[3] != 'q')
+ losing++;
+ break;
+
case 'R':
- /* This depends on the fact that ADDR registers are
- eight more than their corresponding DATA regs, so
- the result will have the ADDR_REG bit set */
- install_operand(s[1],opP->reg-DATA);
- break;
-
+ if (opP->mode != DREG && opP->mode != AREG)
+ losing++;
+ break;
+
+ case 'r':
+ if (opP->mode != AINDR
+ && (opP->mode != BASE
+ || (opP->reg != 0
+ && opP->reg != ZADDR0)
+ || opP->disp.exp.X_op != O_absent
+ || ((opP->index.reg < DATA0
+ || opP->index.reg > DATA7)
+ && (opP->index.reg < ADDR0
+ || opP->index.reg > ADDR7))
+ || opP->index.size != SIZE_UNSPEC
+ || opP->index.scale != 1))
+ losing++;
+ break;
+
case 's':
- if(opP->reg==FPI) tmpreg=0x1;
- else if(opP->reg==FPS) tmpreg=0x2;
- else if(opP->reg==FPC) tmpreg=0x4;
- else as_fatal("failed sanity check.");
- install_operand(s[1],tmpreg);
- break;
-
- case 'S': /* Ignore it */
- break;
-
- case 'T':
- install_operand(s[1],get_num(opP->con1,30));
- break;
-
- case 'U': /* Ignore it */
- break;
-
- case 'c':
- switch (opP->reg) {
- case NC: tmpreg = 0; break;
- case DC: tmpreg = 1; break;
- case IC: tmpreg = 2; break;
- case BC: tmpreg = 3; break;
- default:
- as_fatal("failed sanity check");
- } /* switch on cache token */
- install_operand(s[1], tmpreg);
- break;
+ if (opP->mode != CONTROL
+ || ! (opP->reg == FPI
+ || opP->reg == FPS
+ || opP->reg == FPC))
+ losing++;
+ break;
+
+ case 'S':
+ if (opP->mode != CONTROL || opP->reg != SR)
+ losing++;
+ break;
+
+ case 't':
+ if (opP->mode != IMMED)
+ losing++;
+ else if (opP->disp.exp.X_op != O_constant
+ || opP->disp.exp.X_add_number < 0
+ || opP->disp.exp.X_add_number > 7)
+ losing++;
+ break;
+
+ case 'U':
+ if (opP->mode != CONTROL || opP->reg != USP)
+ losing++;
+ break;
+
+ /* JF these are out of order. We could put them
+ in order if we were willing to put up with
+ bunches of #ifdef m68851s in the code.
+
+ Don't forget that you need these operands
+ to use 68030 MMU instructions. */
#ifndef NO_68851
- /* JF: These are out of order, I fear. */
+ /* Memory addressing mode used by pflushr */
+ case '|':
+ if (opP->mode == CONTROL
+ || opP->mode == FPREG
+ || opP->mode == DREG
+ || opP->mode == AREG
+ || opP->mode == REGLST)
+ losing++;
+ /* We should accept immediate operands, but they
+ supposedly have to be quad word, and we don't
+ handle that. I would like to see what a Motorola
+ assembler does before doing something here. */
+ if (opP->mode == IMMED)
+ losing++;
+ break;
+
case 'f':
- switch (opP->reg) {
- case SFC:
- tmpreg=0;
- break;
- case DFC:
- tmpreg=1;
- break;
- default:
- as_fatal("failed sanity check.");
- }
- install_operand(s[1],tmpreg);
- break;
-
- case 'P':
- switch(opP->reg) {
- case TC:
- tmpreg=0;
- break;
- case CAL:
- tmpreg=4;
- break;
- case VAL:
- tmpreg=5;
- break;
- case SCC:
- tmpreg=6;
- break;
- case AC:
- tmpreg=7;
- break;
- default:
- as_fatal("failed sanity check.");
- }
- install_operand(s[1],tmpreg);
- break;
-
+ if (opP->mode != CONTROL
+ || (opP->reg != SFC && opP->reg != DFC))
+ losing++;
+ break;
+
+ case '0':
+ if (opP->mode != CONTROL || opP->reg != TC)
+ losing++;
+ break;
+
+ case '1':
+ if (opP->mode != CONTROL || opP->reg != AC)
+ losing++;
+ break;
+
+ case '2':
+ if (opP->mode != CONTROL
+ || (opP->reg != CAL
+ && opP->reg != VAL
+ && opP->reg != SCC))
+ losing++;
+ break;
+
case 'V':
- if (opP->reg == VAL)
- break;
- as_fatal("failed sanity check.");
-
+ if (opP->mode != CONTROL
+ || opP->reg != VAL)
+ losing++;
+ break;
+
case 'W':
- switch(opP->reg) {
-
- case DRP:
- tmpreg=1;
- break;
- case SRP:
- tmpreg=2;
- break;
- case CRP:
- tmpreg=3;
- break;
- default:
- as_fatal("failed sanity check.");
- }
- install_operand(s[1],tmpreg);
- break;
-
+ if (opP->mode != CONTROL
+ || (opP->reg != DRP
+ && opP->reg != SRP
+ && opP->reg != CRP))
+ losing++;
+ break;
+
case 'X':
- switch (opP->reg) {
- case BAD: case BAD+1: case BAD+2: case BAD+3:
- case BAD+4: case BAD+5: case BAD+6: case BAD+7:
- tmpreg = (4 << 10) | ((opP->reg - BAD) << 2);
- break;
-
- case BAC: case BAC+1: case BAC+2: case BAC+3:
- case BAC+4: case BAC+5: case BAC+6: case BAC+7:
- tmpreg = (5 << 10) | ((opP->reg - BAC) << 2);
- break;
-
- default:
- as_fatal("failed sanity check.");
- }
- install_operand(s[1], tmpreg);
- break;
+ if (opP->mode != CONTROL
+ || (!(opP->reg >= BAD && opP->reg <= BAD + 7)
+ && !(opP->reg >= BAC && opP->reg <= BAC + 7)))
+ losing++;
+ break;
+
case 'Y':
- know(opP->reg == PSR);
- break;
+ if (opP->mode != CONTROL || opP->reg != PSR)
+ losing++;
+ break;
+
case 'Z':
- know(opP->reg == PCSR);
- break;
-#endif /* m68851 */
+ if (opP->mode != CONTROL || opP->reg != PCSR)
+ losing++;
+ break;
+#endif
+ case 'c':
+ if (opP->mode != CONTROL
+ || (opP->reg != NC
+ && opP->reg != IC
+ && opP->reg != DC
+ && opP->reg != BC))
+ {
+ losing++;
+ } /* not a cache specifier. */
+ break;
+
case '_':
- tmpreg=get_num(opP->con1,80);
- install_operand(s[1], tmpreg);
- break;
+ if (opP->mode != ABSL)
+ ++losing;
+ break;
+
+ case 'u':
+ if (opP->reg < DATA0L || opP->reg > ADDR7U)
+ losing++;
+ /* FIXME: kludge instead of fixing parser:
+ upper/lower registers are *not* CONTROL
+ registers, but ordinary ones. */
+ if ((opP->reg >= DATA0L && opP->reg <= DATA7L)
+ || (opP->reg >= DATA0U && opP->reg <= DATA7U))
+ opP->mode = DREG;
+ else
+ opP->mode = AREG;
+ break;
+
+ default:
+ abort ();
+ } /* switch on type of operand */
+
+ if (losing)
+ break;
+ } /* for each operand */
+ } /* if immediately wrong */
+
+ if (!losing)
+ {
+ break;
+ } /* got it. */
+
+ opcode = opcode->m_next;
+
+ if (!opcode)
+ {
+ if (ok_arch
+ && !(ok_arch & current_architecture))
+ {
+ char buf[200], *cp;
+
+ strcpy (buf,
+ _("invalid instruction for this architecture; needs "));
+ cp = buf + strlen (buf);
+ switch (ok_arch)
+ {
+ case mfloat:
+ strcpy (cp, _("fpu (68040, 68060 or 68881/68882)"));
+ break;
+ case mmmu:
+ strcpy (cp, _("mmu (68030 or 68851)"));
+ break;
+ case m68020up:
+ strcpy (cp, _("68020 or higher"));
+ break;
+ case m68000up:
+ strcpy (cp, _("68000 or higher"));
+ break;
+ case m68010up:
+ strcpy (cp, _("68010 or higher"));
+ break;
default:
- as_fatal("Internal error: Operand type %c unknown in line %s of file \"%s\"", s[0], __LINE__, __FILE__);
+ {
+ int got_one = 0, idx;
+ for (idx = 0;
+ idx < (int) (sizeof (archs) / sizeof (archs[0]));
+ idx++)
+ {
+ if ((archs[idx].arch & ok_arch)
+ && ! archs[idx].alias)
+ {
+ if (got_one)
+ {
+ strcpy (cp, " or ");
+ cp += strlen (cp);
+ }
+ got_one = 1;
+ strcpy (cp, archs[idx].name);
+ cp += strlen (cp);
+ }
+ }
+ }
}
- }
- /* By the time whe get here (FINALLY) the_ins contains the complete
- instruction, ready to be emitted. . . */
-} /* m68k_ip() */
+ cp = xmalloc (strlen (buf) + 1);
+ strcpy (cp, buf);
+ the_ins.error = cp;
+ }
+ else
+ the_ins.error = _("operands mismatch");
+ return;
+ } /* Fell off the end */
+
+ losing = 0;
+ }
-/*
- * get_regs := '/' + ?
- * | '-' + <register>
- * | '-' + <register> + ?
- * | <empty>
- * ;
- *
+ /* now assemble it */
+
+ the_ins.args = opcode->m_operands;
+ the_ins.numargs = opcode->m_opnum;
+ the_ins.numo = opcode->m_codenum;
+ the_ins.opcode[0] = getone (opcode);
+ the_ins.opcode[1] = gettwo (opcode);
+
+ for (s = the_ins.args, opP = &the_ins.operands[0]; *s; s += 2, opP++)
+ {
+ /* This switch is a doozy.
+ Watch the first step; its a big one! */
+ switch (s[0])
+ {
+
+ case '*':
+ case '~':
+ case '%':
+ case ';':
+ case '@':
+ case '!':
+ case '&':
+ case '$':
+ case '?':
+ case '/':
+ case '<':
+ case '>':
+ case 'm':
+ case 'n':
+ case 'o':
+ case 'p':
+ case 'q':
+ case 'v':
+#ifndef NO_68851
+ case '|':
+#endif
+ switch (opP->mode)
+ {
+ case IMMED:
+ tmpreg = 0x3c; /* 7.4 */
+ if (strchr ("bwl", s[1]))
+ nextword = get_num (&opP->disp, 80);
+ else
+ nextword = get_num (&opP->disp, 0);
+ if (isvar (&opP->disp))
+ add_fix (s[1], &opP->disp, 0, 0);
+ switch (s[1])
+ {
+ case 'b':
+ if (!isbyte (nextword))
+ opP->error = _("operand out of range");
+ addword (nextword);
+ baseo = 0;
+ break;
+ case 'w':
+ if (!isword (nextword))
+ opP->error = _("operand out of range");
+ addword (nextword);
+ baseo = 0;
+ break;
+ case 'W':
+ if (!issword (nextword))
+ opP->error = _("operand out of range");
+ addword (nextword);
+ baseo = 0;
+ break;
+ case 'l':
+ addword (nextword >> 16);
+ addword (nextword);
+ baseo = 0;
+ break;
- * The idea here must be to scan in a set of registers but I don't
- * understand it. Looks awfully sloppy to me but I don't have any doc on
- * this format so...
+ case 'f':
+ baseo = 2;
+ outro = 8;
+ break;
+ case 'F':
+ baseo = 4;
+ outro = 11;
+ break;
+ case 'x':
+ baseo = 6;
+ outro = 15;
+ break;
+ case 'p':
+ baseo = 6;
+ outro = -1;
+ break;
+ default:
+ abort ();
+ }
+ if (!baseo)
+ break;
- *
- *
- */
+ /* We gotta put out some float */
+ if (op (&opP->disp) != O_big)
+ {
+ valueT val;
+ int gencnt;
+
+ /* Can other cases happen here? */
+ if (op (&opP->disp) != O_constant)
+ abort ();
+
+ val = (valueT) offs (&opP->disp);
+ gencnt = 0;
+ do
+ {
+ generic_bignum[gencnt] = (LITTLENUM_TYPE) val;
+ val >>= LITTLENUM_NUMBER_OF_BITS;
+ ++gencnt;
+ }
+ while (val != 0);
+ offs (&opP->disp) = gencnt;
+ }
+ if (offs (&opP->disp) > 0)
+ {
+ if (offs (&opP->disp) > baseo)
+ {
+ as_warn (_("Bignum too big for %c format; truncated"),
+ s[1]);
+ offs (&opP->disp) = baseo;
+ }
+ baseo -= offs (&opP->disp);
+ while (baseo--)
+ addword (0);
+ for (wordp = generic_bignum + offs (&opP->disp) - 1;
+ offs (&opP->disp)--;
+ --wordp)
+ addword (*wordp);
+ break;
+ }
+ gen_to_words (words, baseo, (long) outro);
+ for (wordp = words; baseo--; wordp++)
+ addword (*wordp);
+ break;
+ case DREG:
+ tmpreg = opP->reg - DATA; /* 0.dreg */
+ break;
+ case AREG:
+ tmpreg = 0x08 + opP->reg - ADDR; /* 1.areg */
+ break;
+ case AINDR:
+ tmpreg = 0x10 + opP->reg - ADDR; /* 2.areg */
+ break;
+ case ADEC:
+ tmpreg = 0x20 + opP->reg - ADDR; /* 4.areg */
+ break;
+ case AINC:
+ tmpreg = 0x18 + opP->reg - ADDR; /* 3.areg */
+ break;
+ case DISP:
+
+ nextword = get_num (&opP->disp, 80);
+
+ if (opP->reg == PC
+ && ! isvar (&opP->disp)
+ && m68k_abspcadd)
+ {
+ opP->disp.exp.X_op = O_symbol;
+#ifndef BFD_ASSEMBLER
+ opP->disp.exp.X_add_symbol = &abs_symbol;
+#else
+ opP->disp.exp.X_add_symbol =
+ section_symbol (absolute_section);
+#endif
+ }
-static int get_regs(i,str,opP)
-int i;
-struct m68k_op *opP;
-char *str;
-{
- /* 26, 25, 24, 23-16, 15-8, 0-7 */
- /* Low order 24 bits encoded fpc,fps,fpi,fp7-fp0,a7-a0,d7-d0 */
- unsigned long cur_regs = 0;
- int reg1,
- reg2;
-
-#define ADD_REG(x) { if(x==FPI) cur_regs|=(1<<24);\
- else if(x==FPS) cur_regs|=(1<<25);\
- else if(x==FPC) cur_regs|=(1<<26);\
- else cur_regs|=(1<<(x-1)); }
-
- reg1=i;
- for(;;) {
- if(*str=='/') {
- ADD_REG(reg1);
- str++;
- } else if(*str=='-') {
- str++;
- reg2=m68k_reg_parse(&str);
- if(reg2<DATA || reg2>=FPREG+8 || reg1==FPI || reg1==FPS || reg1==FPC) {
- opP->error="unknown register in register list";
- return FAIL;
+ /* Force into index mode. Hope this works */
+
+ /* We do the first bit for 32-bit displacements, and the
+ second bit for 16 bit ones. It is possible that we
+ should make the default be WORD instead of LONG, but
+ I think that'd break GCC, so we put up with a little
+ inefficiency for the sake of working output. */
+
+ if (!issword (nextword)
+ || (isvar (&opP->disp)
+ && ((opP->disp.size == SIZE_UNSPEC
+ && flag_short_refs == 0
+ && cpu_of_arch (current_architecture) >= m68020
+ && ! arch_coldfire_p (current_architecture))
+ || opP->disp.size == SIZE_LONG)))
+ {
+ if (cpu_of_arch (current_architecture) < m68020
+ || arch_coldfire_p (current_architecture))
+ opP->error =
+ _("displacement too large for this architecture; needs 68020 or higher");
+ if (opP->reg == PC)
+ tmpreg = 0x3B; /* 7.3 */
+ else
+ tmpreg = 0x30 + opP->reg - ADDR; /* 6.areg */
+ if (isvar (&opP->disp))
+ {
+ if (opP->reg == PC)
+ {
+ if (opP->disp.size == SIZE_LONG
+#ifdef OBJ_ELF
+ /* If the displacement needs pic
+ relocation it cannot be relaxed. */
+ || opP->disp.pic_reloc != pic_none
+#endif
+ )
+ {
+ addword (0x0170);
+ add_fix ('l', &opP->disp, 1, 2);
+ }
+ else
+ {
+ add_frag (adds (&opP->disp),
+ offs (&opP->disp),
+ TAB (PCREL1632, SZ_UNDEF));
+ break;
+ }
+ }
+ else
+ {
+ addword (0x0170);
+ add_fix ('l', &opP->disp, 0, 0);
}
- while(reg1<=reg2) {
- ADD_REG(reg1);
- reg1++;
+ }
+ else
+ addword (0x0170);
+ addword (nextword >> 16);
+ }
+ else
+ {
+ if (opP->reg == PC)
+ tmpreg = 0x3A; /* 7.2 */
+ else
+ tmpreg = 0x28 + opP->reg - ADDR; /* 5.areg */
+
+ if (isvar (&opP->disp))
+ {
+ if (opP->reg == PC)
+ {
+ add_fix ('w', &opP->disp, 1, 0);
}
- if(*str=='\0')
- break;
- } else if(*str=='\0') {
- ADD_REG(reg1);
- break;
- } else {
- opP->error="unknow character in register list";
- return FAIL;
+ else
+ add_fix ('w', &opP->disp, 0, 0);
+ }
}
-/* DJA -- Bug Fix. Did't handle d1-d2/a1 until the following instruction was added */
- if (*str=='/')
- str ++;
- reg1=m68k_reg_parse(&str);
- if((reg1<DATA || reg1>=FPREG+8) && !(reg1==FPI || reg1==FPS || reg1==FPC)) {
- opP->error="unknown register in register list";
- return FAIL;
+ addword (nextword);
+ break;
+
+ case POST:
+ case PRE:
+ case BASE:
+ nextword = 0;
+ baseo = get_num (&opP->disp, 80);
+ if (opP->mode == POST || opP->mode == PRE)
+ outro = get_num (&opP->odisp, 80);
+ /* Figure out the `addressing mode'.
+ Also turn on the BASE_DISABLE bit, if needed. */
+ if (opP->reg == PC || opP->reg == ZPC)
+ {
+ tmpreg = 0x3b; /* 7.3 */
+ if (opP->reg == ZPC)
+ nextword |= 0x80;
+ }
+ else if (opP->reg == 0)
+ {
+ nextword |= 0x80;
+ tmpreg = 0x30; /* 6.garbage */
+ }
+ else if (opP->reg >= ZADDR0 && opP->reg <= ZADDR7)
+ {
+ nextword |= 0x80;
+ tmpreg = 0x30 + opP->reg - ZADDR0;
+ }
+ else
+ tmpreg = 0x30 + opP->reg - ADDR; /* 6.areg */
+
+ siz1 = opP->disp.size;
+ if (opP->mode == POST || opP->mode == PRE)
+ siz2 = opP->odisp.size;
+ else
+ siz2 = SIZE_UNSPEC;
+
+ /* Index register stuff */
+ if (opP->index.reg != 0
+ && opP->index.reg >= DATA
+ && opP->index.reg <= ADDR7)
+ {
+ nextword |= (opP->index.reg - DATA) << 12;
+
+ if (opP->index.size == SIZE_LONG
+ || (opP->index.size == SIZE_UNSPEC
+ && m68k_index_width_default == SIZE_LONG))
+ nextword |= 0x800;
+
+ if ((opP->index.scale != 1
+ && cpu_of_arch (current_architecture) < m68020)
+ || (opP->index.scale == 8
+ && arch_coldfire_p (current_architecture)))
+ {
+ opP->error =
+ _("scale factor invalid on this architecture; needs cpu32 or 68020 or higher");
+ }
+
+ if (arch_coldfire_p (current_architecture)
+ && opP->index.size == SIZE_WORD)
+ opP->error = _("invalid index size for coldfire");
+
+ switch (opP->index.scale)
+ {
+ case 1:
+ break;
+ case 2:
+ nextword |= 0x200;
+ break;
+ case 4:
+ nextword |= 0x400;
+ break;
+ case 8:
+ nextword |= 0x600;
+ break;
+ default:
+ abort ();
+ }
+ /* IF its simple,
+ GET US OUT OF HERE! */
+
+ /* Must be INDEX, with an index register. Address
+ register cannot be ZERO-PC, and either :b was
+ forced, or we know it will fit. For a 68000 or
+ 68010, force this mode anyways, because the
+ larger modes aren't supported. */
+ if (opP->mode == BASE
+ && ((opP->reg >= ADDR0
+ && opP->reg <= ADDR7)
+ || opP->reg == PC))
+ {
+ if (siz1 == SIZE_BYTE
+ || cpu_of_arch (current_architecture) < m68020
+ || arch_coldfire_p (current_architecture)
+ || (siz1 == SIZE_UNSPEC
+ && ! isvar (&opP->disp)
+ && issbyte (baseo)))
+ {
+ nextword += baseo & 0xff;
+ addword (nextword);
+ if (isvar (&opP->disp))
+ {
+ /* Do a byte relocation. If it doesn't
+ fit (possible on m68000) let the
+ fixup processing complain later. */
+ if (opP->reg == PC)
+ add_fix ('B', &opP->disp, 1, 1);
+ else
+ add_fix ('B', &opP->disp, 0, 0);
+ }
+ else if (siz1 != SIZE_BYTE)
+ {
+ if (siz1 != SIZE_UNSPEC)
+ as_warn (_("Forcing byte displacement"));
+ if (! issbyte (baseo))
+ opP->error = _("byte displacement out of range");
+ }
+
+ break;
+ }
+ else if (siz1 == SIZE_UNSPEC
+ && opP->reg == PC
+ && isvar (&opP->disp)
+ && subs (&opP->disp) == NULL
+#ifdef OBJ_ELF
+ /* If the displacement needs pic
+ relocation it cannot be relaxed. */
+ && opP->disp.pic_reloc == pic_none
+#endif
+ )
+ {
+ /* The code in md_convert_frag_1 needs to be
+ able to adjust nextword. Call frag_grow
+ to ensure that we have enough space in
+ the frag obstack to make all the bytes
+ contiguous. */
+ frag_grow (14);
+ nextword += baseo & 0xff;
+ addword (nextword);
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (PCINDEX, SZ_UNDEF));
+
+ break;
+ }
+ }
+ }
+ else
+ {
+ nextword |= 0x40; /* No index reg */
+ if (opP->index.reg >= ZDATA0
+ && opP->index.reg <= ZDATA7)
+ nextword |= (opP->index.reg - ZDATA0) << 12;
+ else if (opP->index.reg >= ZADDR0
+ || opP->index.reg <= ZADDR7)
+ nextword |= (opP->index.reg - ZADDR0 + 8) << 12;
}
- }
- opP->reg=cur_regs;
- return OK;
-} /* get_regs() */
-static int reverse_16_bits(in)
-int in;
-{
- int out=0;
- int n;
+ /* It isn't simple. */
+
+ if (cpu_of_arch (current_architecture) < m68020
+ || arch_coldfire_p (current_architecture))
+ opP->error =
+ _("invalid operand mode for this architecture; needs 68020 or higher");
+
+ nextword |= 0x100;
+ /* If the guy specified a width, we assume that it is
+ wide enough. Maybe it isn't. If so, we lose. */
+ switch (siz1)
+ {
+ case SIZE_UNSPEC:
+ if (isvar (&opP->disp)
+ ? m68k_rel32
+ : ! issword (baseo))
+ {
+ siz1 = SIZE_LONG;
+ nextword |= 0x30;
+ }
+ else if (! isvar (&opP->disp) && baseo == 0)
+ nextword |= 0x10;
+ else
+ {
+ nextword |= 0x20;
+ siz1 = SIZE_WORD;
+ }
+ break;
+ case SIZE_BYTE:
+ as_warn (_(":b not permitted; defaulting to :w"));
+ /* Fall through. */
+ case SIZE_WORD:
+ nextword |= 0x20;
+ break;
+ case SIZE_LONG:
+ nextword |= 0x30;
+ break;
+ }
- static int mask[16] = {
-0x0001,0x0002,0x0004,0x0008,0x0010,0x0020,0x0040,0x0080,
-0x0100,0x0200,0x0400,0x0800,0x1000,0x2000,0x4000,0x8000
- };
- for(n=0;n<16;n++) {
- if(in&mask[n])
- out|=mask[15-n];
- }
- return out;
-} /* reverse_16_bits() */
+ /* Figure out innner displacement stuff */
+ if (opP->mode == POST || opP->mode == PRE)
+ {
+ if (cpu_of_arch (current_architecture) & cpu32)
+ opP->error = _("invalid operand mode for this architecture; needs 68020 or higher");
+ switch (siz2)
+ {
+ case SIZE_UNSPEC:
+ if (isvar (&opP->odisp)
+ ? m68k_rel32
+ : ! issword (outro))
+ {
+ siz2 = SIZE_LONG;
+ nextword |= 0x3;
+ }
+ else if (! isvar (&opP->odisp) && outro == 0)
+ nextword |= 0x1;
+ else
+ {
+ nextword |= 0x2;
+ siz2 = SIZE_WORD;
+ }
+ break;
+ case 1:
+ as_warn (_(":b not permitted; defaulting to :w"));
+ /* Fall through. */
+ case 2:
+ nextword |= 0x2;
+ break;
+ case 3:
+ nextword |= 0x3;
+ break;
+ }
+ if (opP->mode == POST
+ && (nextword & 0x40) == 0)
+ nextword |= 0x04;
+ }
+ addword (nextword);
+
+ if (siz1 != SIZE_UNSPEC && isvar (&opP->disp))
+ {
+ if (opP->reg == PC || opP->reg == ZPC)
+ add_fix (siz1 == SIZE_LONG ? 'l' : 'w', &opP->disp, 1, 2);
+ else
+ add_fix (siz1 == SIZE_LONG ? 'l' : 'w', &opP->disp, 0, 0);
+ }
+ if (siz1 == SIZE_LONG)
+ addword (baseo >> 16);
+ if (siz1 != SIZE_UNSPEC)
+ addword (baseo);
+
+ if (siz2 != SIZE_UNSPEC && isvar (&opP->odisp))
+ add_fix (siz2 == SIZE_LONG ? 'l' : 'w', &opP->odisp, 0, 0);
+ if (siz2 == SIZE_LONG)
+ addword (outro >> 16);
+ if (siz2 != SIZE_UNSPEC)
+ addword (outro);
+
+ break;
+
+ case ABSL:
+ nextword = get_num (&opP->disp, 80);
+ switch (opP->disp.size)
+ {
+ default:
+ abort ();
+ case SIZE_UNSPEC:
+ if (!isvar (&opP->disp) && issword (offs (&opP->disp)))
+ {
+ tmpreg = 0x38; /* 7.0 */
+ addword (nextword);
+ break;
+ }
+ if (isvar (&opP->disp)
+ && !subs (&opP->disp)
+ && adds (&opP->disp)
+#ifdef OBJ_ELF
+ /* If the displacement needs pic relocation it
+ cannot be relaxed. */
+ && opP->disp.pic_reloc == pic_none
+#endif
+ && !flag_long_jumps
+ && !strchr ("~%&$?", s[0]))
+ {
+ tmpreg = 0x3A; /* 7.2 */
+ add_frag (adds (&opP->disp),
+ offs (&opP->disp),
+ TAB (ABSTOPCREL, SZ_UNDEF));
+ break;
+ }
+ /* Fall through into long */
+ case SIZE_LONG:
+ if (isvar (&opP->disp))
+ add_fix ('l', &opP->disp, 0, 0);
+
+ tmpreg = 0x39;/* 7.1 mode */
+ addword (nextword >> 16);
+ addword (nextword);
+ break;
+
+ case SIZE_BYTE:
+ as_bad (_("unsupported byte value; use a different suffix"));
+ /* Fall through. */
+ case SIZE_WORD: /* Word */
+ if (isvar (&opP->disp))
+ add_fix ('w', &opP->disp, 0, 0);
+
+ tmpreg = 0x38;/* 7.0 mode */
+ addword (nextword);
+ break;
+ }
+ break;
+ case CONTROL:
+ case FPREG:
+ default:
+ as_bad (_("unknown/incorrect operand"));
+ /* abort (); */
+ }
+ install_gen_operand (s[1], tmpreg);
+ break;
+
+ case '#':
+ case '^':
+ switch (s[1])
+ { /* JF: I hate floating point! */
+ case 'j':
+ tmpreg = 70;
+ break;
+ case '8':
+ tmpreg = 20;
+ break;
+ case 'C':
+ tmpreg = 50;
+ break;
+ case '3':
+ default:
+ tmpreg = 80;
+ break;
+ }
+ tmpreg = get_num (&opP->disp, tmpreg);
+ if (isvar (&opP->disp))
+ add_fix (s[1], &opP->disp, 0, 0);
+ switch (s[1])
+ {
+ case 'b': /* Danger: These do no check for
+ certain types of overflow.
+ user beware! */
+ if (!isbyte (tmpreg))
+ opP->error = _("out of range");
+ insop (tmpreg, opcode);
+ if (isvar (&opP->disp))
+ the_ins.reloc[the_ins.nrel - 1].n =
+ (opcode->m_codenum) * 2 + 1;
+ break;
+ case 'B':
+ if (!issbyte (tmpreg))
+ opP->error = _("out of range");
+ the_ins.opcode[the_ins.numo - 1] |= tmpreg & 0xff;
+ if (isvar (&opP->disp))
+ the_ins.reloc[the_ins.nrel - 1].n = opcode->m_codenum * 2 - 1;
+ break;
+ case 'w':
+ if (!isword (tmpreg))
+ opP->error = _("out of range");
+ insop (tmpreg, opcode);
+ if (isvar (&opP->disp))
+ the_ins.reloc[the_ins.nrel - 1].n = (opcode->m_codenum) * 2;
+ break;
+ case 'W':
+ if (!issword (tmpreg))
+ opP->error = _("out of range");
+ insop (tmpreg, opcode);
+ if (isvar (&opP->disp))
+ the_ins.reloc[the_ins.nrel - 1].n = (opcode->m_codenum) * 2;
+ break;
+ case 'l':
+ /* Because of the way insop works, we put these two out
+ backwards. */
+ insop (tmpreg, opcode);
+ insop (tmpreg >> 16, opcode);
+ if (isvar (&opP->disp))
+ the_ins.reloc[the_ins.nrel - 1].n = (opcode->m_codenum) * 2;
+ break;
+ case '3':
+ tmpreg &= 0xFF;
+ case '8':
+ case 'C':
+ case 'j':
+ install_operand (s[1], tmpreg);
+ break;
+ default:
+ abort ();
+ }
+ break;
-static int reverse_8_bits(in)
-int in;
-{
- int out=0;
- int n;
+ case '+':
+ case '-':
+ case 'A':
+ case 'a':
+ install_operand (s[1], opP->reg - ADDR);
+ break;
+
+ case 'B':
+ tmpreg = get_num (&opP->disp, 80);
+ switch (s[1])
+ {
+ case 'B':
+ add_fix ('B', &opP->disp, 1, -1);
+ break;
+ case 'W':
+ add_fix ('w', &opP->disp, 1, 0);
+ addword (0);
+ break;
+ case 'L':
+ long_branch:
+ if (! HAVE_LONG_BRANCH (current_architecture))
+ as_warn (_("Can't use long branches on 68000/68010/5200"));
+ the_ins.opcode[0] |= 0xff;
+ add_fix ('l', &opP->disp, 1, 0);
+ addword (0);
+ addword (0);
+ break;
+ case 'g':
+ if (subs (&opP->disp)) /* We can't relax it */
+ goto long_branch;
+
+#ifdef OBJ_ELF
+ /* If the displacement needs pic relocation it cannot be
+ relaxed. */
+ if (opP->disp.pic_reloc != pic_none)
+ goto long_branch;
+#endif
+ /* This could either be a symbol, or an absolute
+ address. If it's an absolute address, turn it into
+ an absolute jump right here and keep it out of the
+ relaxer. */
+ if (adds (&opP->disp) == 0)
+ {
+ if (the_ins.opcode[0] == 0x6000) /* jbra */
+ the_ins.opcode[0] = 0x4EF1;
+ else if (the_ins.opcode[0] == 0x6100) /* jbsr */
+ the_ins.opcode[0] = 0x4EB1;
+ else /* jCC */
+ {
+ the_ins.opcode[0] ^= 0x0100;
+ the_ins.opcode[0] |= 0x0006;
+ addword (0x4EF1);
+ }
+ add_fix ('l', &opP->disp, 0, 0);
+ addword (0);
+ addword (0);
+ break;
+ }
- static int mask[8] = {
-0x0001,0x0002,0x0004,0x0008,0x0010,0x0020,0x0040,0x0080,
- };
+ /* Now we know it's going into the relaxer. Now figure
+ out which mode. We try in this order of preference:
+ long branch, absolute jump, byte/word branches only. */
+ if (HAVE_LONG_BRANCH (current_architecture))
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (BRANCHBWL, SZ_UNDEF));
+ else if (! flag_keep_pcrel)
+ {
+ if ((the_ins.opcode[0] == 0x6000)
+ || (the_ins.opcode[0] == 0x6100))
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (BRABSJUNC, SZ_UNDEF));
+ else
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (BRABSJCOND, SZ_UNDEF));
+ }
+ else
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (BRANCHBW, SZ_UNDEF));
+ break;
+ case 'w':
+ if (isvar (&opP->disp))
+ {
+ /* Check for DBcc instructions. We can relax them,
+ but only if we have long branches and/or absolute
+ jumps. */
+ if (((the_ins.opcode[0] & 0xf0f8) == 0x50c8)
+ && (HAVE_LONG_BRANCH (current_architecture)
+ || (! flag_keep_pcrel)))
+ {
+ if (HAVE_LONG_BRANCH (current_architecture))
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (DBCCLBR, SZ_UNDEF));
+ else
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (DBCCABSJ, SZ_UNDEF));
+ break;
+ }
+ add_fix ('w', &opP->disp, 1, 0);
+ }
+ addword (0);
+ break;
+ case 'C': /* Fixed size LONG coproc branches */
+ add_fix ('l', &opP->disp, 1, 0);
+ addword (0);
+ addword (0);
+ break;
+ case 'c': /* Var size Coprocesssor branches */
+ if (subs (&opP->disp) || (adds (&opP->disp) == 0))
+ {
+ the_ins.opcode[the_ins.numo - 1] |= 0x40;
+ add_fix ('l', &opP->disp, 1, 0);
+ addword (0);
+ addword (0);
+ }
+ else
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (FBRANCH, SZ_UNDEF));
+ break;
+ default:
+ abort ();
+ }
+ break;
+
+ case 'C': /* Ignore it */
+ break;
+
+ case 'd': /* JF this is a kludge */
+ install_operand ('s', opP->reg - ADDR);
+ tmpreg = get_num (&opP->disp, 80);
+ if (!issword (tmpreg))
+ {
+ as_warn (_("Expression out of range, using 0"));
+ tmpreg = 0;
+ }
+ addword (tmpreg);
+ break;
- for(n=0;n<8;n++) {
- if(in&mask[n])
- out|=mask[7-n];
- }
- return out;
-} /* reverse_8_bits() */
+ case 'D':
+ install_operand (s[1], opP->reg - DATA);
+ break;
-static void install_operand(mode,val)
-int mode;
-int val;
-{
- switch(mode) {
- case 's':
- the_ins.opcode[0]|=val & 0xFF; /* JF FF is for M kludge */
- break;
- case 'd':
- the_ins.opcode[0]|=val<<9;
- break;
- case '1':
- the_ins.opcode[1]|=val<<12;
- break;
- case '2':
- the_ins.opcode[1]|=val<<6;
- break;
- case '3':
- the_ins.opcode[1]|=val;
- break;
- case '4':
- the_ins.opcode[2]|=val<<12;
- break;
- case '5':
- the_ins.opcode[2]|=val<<6;
- break;
- case '6':
- /* DANGER! This is a hack to force cas2l and cas2w cmds
- to be three words long! */
- the_ins.numo++;
- the_ins.opcode[2]|=val;
- break;
- case '7':
- the_ins.opcode[1]|=val<<7;
- break;
- case '8':
- the_ins.opcode[1]|=val<<10;
- break;
-#ifndef NO_68851
- case '9':
- the_ins.opcode[1]|=val<<5;
- break;
-#endif
+ case 'E': /* Ignore it */
+ break;
+
+ case 'F':
+ install_operand (s[1], opP->reg - FP0);
+ break;
+
+ case 'G': /* Ignore it */
+ case 'H':
+ break;
+
+ case 'I':
+ tmpreg = opP->reg - COP0;
+ install_operand (s[1], tmpreg);
+ break;
+
+ case 'J': /* JF foo */
+ switch (opP->reg)
+ {
+ case SFC:
+ tmpreg = 0x000;
+ break;
+ case DFC:
+ tmpreg = 0x001;
+ break;
+ case CACR:
+ tmpreg = 0x002;
+ break;
+ case TC:
+ tmpreg = 0x003;
+ break;
+ case ITT0:
+ tmpreg = 0x004;
+ break;
+ case ITT1:
+ tmpreg = 0x005;
+ break;
+ case DTT0:
+ tmpreg = 0x006;
+ break;
+ case DTT1:
+ tmpreg = 0x007;
+ break;
+ case BUSCR:
+ tmpreg = 0x008;
+ break;
+
+ case USP:
+ tmpreg = 0x800;
+ break;
+ case VBR:
+ tmpreg = 0x801;
+ break;
+ case CAAR:
+ tmpreg = 0x802;
+ break;
+ case MSP:
+ tmpreg = 0x803;
+ break;
+ case ISP:
+ tmpreg = 0x804;
+ break;
+ case MMUSR:
+ tmpreg = 0x805;
+ break;
+ case URP:
+ tmpreg = 0x806;
+ break;
+ case SRP:
+ tmpreg = 0x807;
+ break;
+ case PCR:
+ tmpreg = 0x808;
+ break;
+ case ROMBAR:
+ tmpreg = 0xC00;
+ break;
+ case RAMBAR0:
+ tmpreg = 0xC04;
+ break;
+ case RAMBAR1:
+ tmpreg = 0xC05;
+ break;
+ case MBAR:
+ tmpreg = 0xC0F;
+ break;
+ default:
+ abort ();
+ }
+ install_operand (s[1], tmpreg);
+ break;
- case 't':
- the_ins.opcode[1]|=(val<<10)|(val<<7);
- break;
- case 'D':
- the_ins.opcode[1]|=(val<<12)|val;
- break;
- case 'g':
- the_ins.opcode[0]|=val=0xff;
- break;
- case 'i':
- the_ins.opcode[0]|=val<<9;
- break;
- case 'C':
- the_ins.opcode[1]|=val;
- break;
- case 'j':
- the_ins.opcode[1]|=val;
- the_ins.numo++; /* What a hack */
- break;
case 'k':
- the_ins.opcode[1]|=val<<4;
- break;
- case 'b':
- case 'w':
+ tmpreg = get_num (&opP->disp, 55);
+ install_operand (s[1], tmpreg & 0x7f);
+ break;
+
case 'l':
- break;
- case 'e':
- the_ins.opcode[0] |= (val << 6);
- break;
+ tmpreg = opP->mask;
+ if (s[1] == 'w')
+ {
+ if (tmpreg & 0x7FF0000)
+ as_bad (_("Floating point register in register list"));
+ insop (reverse_16_bits (tmpreg), opcode);
+ }
+ else
+ {
+ if (tmpreg & 0x700FFFF)
+ as_bad (_("Wrong register in floating-point reglist"));
+ install_operand (s[1], reverse_8_bits (tmpreg >> 16));
+ }
+ break;
+
case 'L':
- the_ins.opcode[1] = (val >> 16);
- the_ins.opcode[2] = val & 0xffff;
- break;
- case 'c':
- default:
- as_fatal("failed sanity check.");
- }
-} /* install_operand() */
+ tmpreg = opP->mask;
+ if (s[1] == 'w')
+ {
+ if (tmpreg & 0x7FF0000)
+ as_bad (_("Floating point register in register list"));
+ insop (tmpreg, opcode);
+ }
+ else if (s[1] == '8')
+ {
+ if (tmpreg & 0x0FFFFFF)
+ as_bad (_("incorrect register in reglist"));
+ install_operand (s[1], tmpreg >> 24);
+ }
+ else
+ {
+ if (tmpreg & 0x700FFFF)
+ as_bad (_("wrong register in floating-point reglist"));
+ else
+ install_operand (s[1], tmpreg >> 16);
+ }
+ break;
+
+ case 'M':
+ install_operand (s[1], get_num (&opP->disp, 60));
+ break;
+
+ case 'O':
+ tmpreg = ((opP->mode == DREG)
+ ? 0x20 + (int) (opP->reg - DATA)
+ : (get_num (&opP->disp, 40) & 0x1F));
+ install_operand (s[1], tmpreg);
+ break;
+
+ case 'Q':
+ tmpreg = get_num (&opP->disp, 10);
+ if (tmpreg == 8)
+ tmpreg = 0;
+ install_operand (s[1], tmpreg);
+ break;
+
+ case 'R':
+ /* This depends on the fact that ADDR registers are eight
+ more than their corresponding DATA regs, so the result
+ will have the ADDR_REG bit set */
+ install_operand (s[1], opP->reg - DATA);
+ break;
+
+ case 'r':
+ if (opP->mode == AINDR)
+ install_operand (s[1], opP->reg - DATA);
+ else
+ install_operand (s[1], opP->index.reg - DATA);
+ break;
-static void install_gen_operand(mode,val)
-int mode;
-int val;
-{
- switch(mode) {
case 's':
- the_ins.opcode[0]|=val;
- break;
- case 'd':
- /* This is a kludge!!! */
- the_ins.opcode[0]|=(val&0x07)<<9|(val&0x38)<<3;
- break;
- case 'b':
- case 'w':
- case 'l':
- case 'f':
- case 'F':
- case 'x':
- case 'p':
- the_ins.opcode[0]|=val;
- break;
- /* more stuff goes here */
- default:
- as_fatal("failed sanity check.");
- }
-} /* install_gen_operand() */
+ if (opP->reg == FPI)
+ tmpreg = 0x1;
+ else if (opP->reg == FPS)
+ tmpreg = 0x2;
+ else if (opP->reg == FPC)
+ tmpreg = 0x4;
+ else
+ abort ();
+ install_operand (s[1], tmpreg);
+ break;
+
+ case 'S': /* Ignore it */
+ break;
+
+ case 'T':
+ install_operand (s[1], get_num (&opP->disp, 30));
+ break;
+
+ case 'U': /* Ignore it */
+ break;
-/*
+ case 'c':
+ switch (opP->reg)
+ {
+ case NC:
+ tmpreg = 0;
+ break;
+ case DC:
+ tmpreg = 1;
+ break;
+ case IC:
+ tmpreg = 2;
+ break;
+ case BC:
+ tmpreg = 3;
+ break;
+ default:
+ as_fatal (_("failed sanity check"));
+ } /* switch on cache token */
+ install_operand (s[1], tmpreg);
+ break;
+#ifndef NO_68851
+ /* JF: These are out of order, I fear. */
+ case 'f':
+ switch (opP->reg)
+ {
+ case SFC:
+ tmpreg = 0;
+ break;
+ case DFC:
+ tmpreg = 1;
+ break;
+ default:
+ abort ();
+ }
+ install_operand (s[1], tmpreg);
+ break;
+
+ case '0':
+ case '1':
+ case '2':
+ switch (opP->reg)
+ {
+ case TC:
+ tmpreg = 0;
+ break;
+ case CAL:
+ tmpreg = 4;
+ break;
+ case VAL:
+ tmpreg = 5;
+ break;
+ case SCC:
+ tmpreg = 6;
+ break;
+ case AC:
+ tmpreg = 7;
+ break;
+ default:
+ abort ();
+ }
+ install_operand (s[1], tmpreg);
+ break;
+
+ case 'V':
+ if (opP->reg == VAL)
+ break;
+ abort ();
+
+ case 'W':
+ switch (opP->reg)
+ {
+ case DRP:
+ tmpreg = 1;
+ break;
+ case SRP:
+ tmpreg = 2;
+ break;
+ case CRP:
+ tmpreg = 3;
+ break;
+ default:
+ abort ();
+ }
+ install_operand (s[1], tmpreg);
+ break;
+
+ case 'X':
+ switch (opP->reg)
+ {
+ case BAD:
+ case BAD + 1:
+ case BAD + 2:
+ case BAD + 3:
+ case BAD + 4:
+ case BAD + 5:
+ case BAD + 6:
+ case BAD + 7:
+ tmpreg = (4 << 10) | ((opP->reg - BAD) << 2);
+ break;
+
+ case BAC:
+ case BAC + 1:
+ case BAC + 2:
+ case BAC + 3:
+ case BAC + 4:
+ case BAC + 5:
+ case BAC + 6:
+ case BAC + 7:
+ tmpreg = (5 << 10) | ((opP->reg - BAC) << 2);
+ break;
+
+ default:
+ abort ();
+ }
+ install_operand (s[1], tmpreg);
+ break;
+ case 'Y':
+ know (opP->reg == PSR);
+ break;
+ case 'Z':
+ know (opP->reg == PCSR);
+ break;
+#endif /* m68851 */
+ case '3':
+ switch (opP->reg)
+ {
+ case TT0:
+ tmpreg = 2;
+ break;
+ case TT1:
+ tmpreg = 3;
+ break;
+ default:
+ abort ();
+ }
+ install_operand (s[1], tmpreg);
+ break;
+ case 't':
+ tmpreg = get_num (&opP->disp, 20);
+ install_operand (s[1], tmpreg);
+ break;
+ case '_': /* used only for move16 absolute 32-bit address */
+ if (isvar (&opP->disp))
+ add_fix ('l', &opP->disp, 0, 0);
+ tmpreg = get_num (&opP->disp, 80);
+ addword (tmpreg >> 16);
+ addword (tmpreg & 0xFFFF);
+ break;
+ case 'u':
+ install_operand (s[1], opP->reg - DATA0L);
+ opP->reg -= (DATA0L);
+ opP->reg &= 0x0F; /* remove upper/lower bit */
+ break;
+ default:
+ abort ();
+ }
+ }
+
+ /* By the time whe get here (FINALLY) the_ins contains the complete
+ instruction, ready to be emitted. . . */
+}
+
+static int
+reverse_16_bits (in)
+ int in;
+{
+ int out = 0;
+ int n;
+
+ static int mask[16] =
+ {
+ 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
+ 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000, 0x8000
+ };
+ for (n = 0; n < 16; n++)
+ {
+ if (in & mask[n])
+ out |= mask[15 - n];
+ }
+ return out;
+} /* reverse_16_bits() */
+
+static int
+reverse_8_bits (in)
+ int in;
+{
+ int out = 0;
+ int n;
+
+ static int mask[8] =
+ {
+ 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
+ };
+
+ for (n = 0; n < 8; n++)
+ {
+ if (in & mask[n])
+ out |= mask[7 - n];
+ }
+ return out;
+} /* reverse_8_bits() */
+
+/* Cause an extra frag to be generated here, inserting up to 10 bytes
+ (that value is chosen in the frag_var call in md_assemble). TYPE
+ is the subtype of the frag to be generated; its primary type is
+ rs_machine_dependent.
+
+ The TYPE parameter is also used by md_convert_frag_1 and
+ md_estimate_size_before_relax. The appropriate type of fixup will
+ be emitted by md_convert_frag_1.
+
+ ADD becomes the FR_SYMBOL field of the frag, and OFF the FR_OFFSET. */
+static void
+install_operand (mode, val)
+ int mode;
+ int val;
+{
+ switch (mode)
+ {
+ case 's':
+ the_ins.opcode[0] |= val & 0xFF; /* JF FF is for M kludge */
+ break;
+ case 'd':
+ the_ins.opcode[0] |= val << 9;
+ break;
+ case '1':
+ the_ins.opcode[1] |= val << 12;
+ break;
+ case '2':
+ the_ins.opcode[1] |= val << 6;
+ break;
+ case '3':
+ the_ins.opcode[1] |= val;
+ break;
+ case '4':
+ the_ins.opcode[2] |= val << 12;
+ break;
+ case '5':
+ the_ins.opcode[2] |= val << 6;
+ break;
+ case '6':
+ /* DANGER! This is a hack to force cas2l and cas2w cmds to be
+ three words long! */
+ the_ins.numo++;
+ the_ins.opcode[2] |= val;
+ break;
+ case '7':
+ the_ins.opcode[1] |= val << 7;
+ break;
+ case '8':
+ the_ins.opcode[1] |= val << 10;
+ break;
+#ifndef NO_68851
+ case '9':
+ the_ins.opcode[1] |= val << 5;
+ break;
+#endif
+
+ case 't':
+ the_ins.opcode[1] |= (val << 10) | (val << 7);
+ break;
+ case 'D':
+ the_ins.opcode[1] |= (val << 12) | val;
+ break;
+ case 'g':
+ the_ins.opcode[0] |= val = 0xff;
+ break;
+ case 'i':
+ the_ins.opcode[0] |= val << 9;
+ break;
+ case 'C':
+ the_ins.opcode[1] |= val;
+ break;
+ case 'j':
+ the_ins.opcode[1] |= val;
+ the_ins.numo++; /* What a hack */
+ break;
+ case 'k':
+ the_ins.opcode[1] |= val << 4;
+ break;
+ case 'b':
+ case 'w':
+ case 'W':
+ case 'l':
+ break;
+ case 'e':
+ the_ins.opcode[0] |= (val << 6);
+ break;
+ case 'L':
+ the_ins.opcode[1] = (val >> 16);
+ the_ins.opcode[2] = val & 0xffff;
+ break;
+ case 'm':
+ the_ins.opcode[0] |= ((val & 0x8) << (6 - 3));
+ the_ins.opcode[0] |= ((val & 0x7) << 9);
+ the_ins.opcode[1] |= ((val & 0x10) << (7 - 4));
+ break;
+ case 'n':
+ the_ins.opcode[0] |= ((val & 0x8) << (6 - 3));
+ the_ins.opcode[0] |= ((val & 0x7) << 9);
+ break;
+ case 'o':
+ the_ins.opcode[1] |= val << 12;
+ the_ins.opcode[1] |= ((val & 0x10) << (7 - 4));
+ break;
+ case 'M':
+ the_ins.opcode[0] |= (val & 0xF);
+ the_ins.opcode[1] |= ((val & 0x10) << (6 - 4));
+ break;
+ case 'N':
+ the_ins.opcode[1] |= (val & 0xF);
+ the_ins.opcode[1] |= ((val & 0x10) << (6 - 4));
+ break;
+ case 'h':
+ the_ins.opcode[1] |= ((val != 1) << 10);
+ break;
+ case 'c':
+ default:
+ as_fatal (_("failed sanity check."));
+ }
+} /* install_operand() */
+
+static void
+install_gen_operand (mode, val)
+ int mode;
+ int val;
+{
+ switch (mode)
+ {
+ case 's':
+ the_ins.opcode[0] |= val;
+ break;
+ case 'd':
+ /* This is a kludge!!! */
+ the_ins.opcode[0] |= (val & 0x07) << 9 | (val & 0x38) << 3;
+ break;
+ case 'b':
+ case 'w':
+ case 'l':
+ case 'f':
+ case 'F':
+ case 'x':
+ case 'p':
+ the_ins.opcode[0] |= val;
+ break;
+ /* more stuff goes here */
+ default:
+ as_fatal (_("failed sanity check."));
+ }
+} /* install_gen_operand() */
+
+/*
* verify that we have some number of paren pairs, do m68k_ip_op(), and
* then deal with the bitfield hack.
*/
-static char *crack_operand(str,opP)
-register char *str;
-register struct m68k_op *opP;
+static char *
+crack_operand (str, opP)
+ register char *str;
+ register struct m68k_op *opP;
{
- register int parens;
- register int c;
- register char *beg_str;
-
- if(!str) {
- return str;
- }
- beg_str=str;
- for(parens=0;*str && (parens>0 || notend(str));str++) {
- if(*str=='(') parens++;
- else if(*str==')') {
- if(!parens) { /* ERROR */
- opP->error="Extra )";
- return str;
- }
- --parens;
+ register int parens;
+ register int c;
+ register char *beg_str;
+ int inquote = 0;
+
+ if (!str)
+ {
+ return str;
+ }
+ beg_str = str;
+ for (parens = 0; *str && (parens > 0 || inquote || notend (str)); str++)
+ {
+ if (! inquote)
+ {
+ if (*str == '(')
+ parens++;
+ else if (*str == ')')
+ {
+ if (!parens)
+ { /* ERROR */
+ opP->error = _("Extra )");
+ return str;
}
+ --parens;
+ }
}
- if(!*str && parens) { /* ERROR */
- opP->error="Missing )";
- return str;
- }
- c= *str;
- *str='\0';
- if(m68k_ip_op(beg_str,opP)==FAIL) {
- *str=c;
- return str;
- }
- *str=c;
- if(c=='}')
- c= *++str; /* JF bitfield hack */
- if(c) {
- c= *++str;
- if(!c)
- as_bad("Missing operand");
- }
- return str;
-}
+ if (flag_mri && *str == '\'')
+ inquote = ! inquote;
+ }
+ if (!*str && parens)
+ { /* ERROR */
+ opP->error = _("Missing )");
+ return str;
+ }
+ c = *str;
+ *str = '\0';
+ if (m68k_ip_op (beg_str, opP) != 0)
+ {
+ *str = c;
+ return str;
+ }
+ *str = c;
+ if (c == '}')
+ c = *++str; /* JF bitfield hack */
+ if (c)
+ {
+ c = *++str;
+ if (!c)
+ as_bad (_("Missing operand"));
+ }
-/* See the comment up above where the #define notend(... is */
-#if 0
-notend(s)
-char *s;
-{
- if(*s==',') return 0;
- if(*s=='{' || *s=='}')
- return 0;
- if(*s!=':') return 1;
- /* This kludge here is for the division cmd, which is a kludge */
- if(index("aAdD#",s[1])) return 0;
- return 1;
+ /* Detect MRI REG symbols and convert them to REGLSTs. */
+ if (opP->mode == CONTROL && (int)opP->reg < 0)
+ {
+ opP->mode = REGLST;
+ opP->mask = ~(int)opP->reg;
+ opP->reg = 0;
+ }
+
+ return str;
}
-#endif
/* This is the guts of the machine-dependent assembler. STR points to a
machine dependent instruction. This function is supposed to emit
the frags/bytes it assembles to.
- */
-void
-md_assemble(str)
-char *str;
-{
- char *er;
- short *fromP;
- char *toP = NULL;
- int m,n = 0;
- char *to_beg_P;
- int shorts_this_frag;
+ */
+static void
+insert_reg (regname, regnum)
+ const char *regname;
+ int regnum;
+{
+ char buf[100];
+ int i;
- if (current_architecture == 0) {
- current_architecture = (m68020
-#ifndef NO_68881
- | m68881
+#ifdef REGISTER_PREFIX
+ if (!flag_reg_prefix_optional)
+ {
+ buf[0] = REGISTER_PREFIX;
+ strcpy (buf + 1, regname);
+ regname = buf;
+ }
#endif
-#ifndef NO_68851
- | m68851
+
+ symbol_table_insert (symbol_new (regname, reg_section, regnum,
+ &zero_address_frag));
+
+ for (i = 0; regname[i]; i++)
+ buf[i] = islower (regname[i]) ? toupper (regname[i]) : regname[i];
+ buf[i] = '\0';
+
+ symbol_table_insert (symbol_new (buf, reg_section, regnum,
+ &zero_address_frag));
+}
+
+struct init_entry
+ {
+ const char *name;
+ int number;
+ };
+
+static const struct init_entry init_table[] =
+{
+ { "d0", DATA0 },
+ { "d1", DATA1 },
+ { "d2", DATA2 },
+ { "d3", DATA3 },
+ { "d4", DATA4 },
+ { "d5", DATA5 },
+ { "d6", DATA6 },
+ { "d7", DATA7 },
+ { "a0", ADDR0 },
+ { "a1", ADDR1 },
+ { "a2", ADDR2 },
+ { "a3", ADDR3 },
+ { "a4", ADDR4 },
+ { "a5", ADDR5 },
+ { "a6", ADDR6 },
+ { "fp", ADDR6 },
+ { "a7", ADDR7 },
+ { "sp", ADDR7 },
+ { "ssp", ADDR7 },
+ { "fp0", FP0 },
+ { "fp1", FP1 },
+ { "fp2", FP2 },
+ { "fp3", FP3 },
+ { "fp4", FP4 },
+ { "fp5", FP5 },
+ { "fp6", FP6 },
+ { "fp7", FP7 },
+ { "fpi", FPI },
+ { "fpiar", FPI },
+ { "fpc", FPI },
+ { "fps", FPS },
+ { "fpsr", FPS },
+ { "fpc", FPC },
+ { "fpcr", FPC },
+ { "control", FPC },
+ { "status", FPS },
+ { "iaddr", FPI },
+
+ { "cop0", COP0 },
+ { "cop1", COP1 },
+ { "cop2", COP2 },
+ { "cop3", COP3 },
+ { "cop4", COP4 },
+ { "cop5", COP5 },
+ { "cop6", COP6 },
+ { "cop7", COP7 },
+ { "pc", PC },
+ { "zpc", ZPC },
+ { "sr", SR },
+
+ { "ccr", CCR },
+ { "cc", CCR },
+
+ { "acc", ACC },
+ { "macsr", MACSR },
+ { "mask", MASK },
+
+ /* control registers */
+ { "sfc", SFC }, /* Source Function Code */
+ { "sfcr", SFC },
+ { "dfc", DFC }, /* Destination Function Code */
+ { "dfcr", DFC },
+ { "cacr", CACR }, /* Cache Control Register */
+ { "caar", CAAR }, /* Cache Address Register */
+
+ { "usp", USP }, /* User Stack Pointer */
+ { "vbr", VBR }, /* Vector Base Register */
+ { "msp", MSP }, /* Master Stack Pointer */
+ { "isp", ISP }, /* Interrupt Stack Pointer */
+
+ { "itt0", ITT0 }, /* Instruction Transparent Translation Reg 0 */
+ { "itt1", ITT1 }, /* Instruction Transparent Translation Reg 1 */
+ { "dtt0", DTT0 }, /* Data Transparent Translation Register 0 */
+ { "dtt1", DTT1 }, /* Data Transparent Translation Register 1 */
+
+ /* 68ec040 versions of same */
+ { "iacr0", ITT0 }, /* Instruction Access Control Register 0 */
+ { "iacr1", ITT1 }, /* Instruction Access Control Register 0 */
+ { "dacr0", DTT0 }, /* Data Access Control Register 0 */
+ { "dacr1", DTT1 }, /* Data Access Control Register 0 */
+
+ /* mcf5200 versions of same. The ColdFire programmer's reference
+ manual indicated that the order is 2,3,0,1, but Ken Rose
+ <rose@netcom.com> says that 0,1,2,3 is the correct order. */
+ { "acr0", ITT0 }, /* Access Control Unit 0 */
+ { "acr1", ITT1 }, /* Access Control Unit 1 */
+ { "acr2", DTT0 }, /* Access Control Unit 2 */
+ { "acr3", DTT1 }, /* Access Control Unit 3 */
+
+ { "tc", TC }, /* MMU Translation Control Register */
+ { "tcr", TC },
+
+ { "mmusr", MMUSR }, /* MMU Status Register */
+ { "srp", SRP }, /* User Root Pointer */
+ { "urp", URP }, /* Supervisor Root Pointer */
+
+ { "buscr", BUSCR },
+ { "pcr", PCR },
+
+ { "rombar", ROMBAR }, /* ROM Base Address Register */
+ { "rambar0", RAMBAR0 }, /* ROM Base Address Register */
+ { "rambar1", RAMBAR1 }, /* ROM Base Address Register */
+ { "mbar", MBAR }, /* Module Base Address Register */
+ /* end of control registers */
+
+ { "ac", AC },
+ { "bc", BC },
+ { "cal", CAL },
+ { "crp", CRP },
+ { "drp", DRP },
+ { "pcsr", PCSR },
+ { "psr", PSR },
+ { "scc", SCC },
+ { "val", VAL },
+ { "bad0", BAD0 },
+ { "bad1", BAD1 },
+ { "bad2", BAD2 },
+ { "bad3", BAD3 },
+ { "bad4", BAD4 },
+ { "bad5", BAD5 },
+ { "bad6", BAD6 },
+ { "bad7", BAD7 },
+ { "bac0", BAC0 },
+ { "bac1", BAC1 },
+ { "bac2", BAC2 },
+ { "bac3", BAC3 },
+ { "bac4", BAC4 },
+ { "bac5", BAC5 },
+ { "bac6", BAC6 },
+ { "bac7", BAC7 },
+
+ { "ic", IC },
+ { "dc", DC },
+ { "nc", NC },
+
+ { "tt0", TT0 },
+ { "tt1", TT1 },
+ /* 68ec030 versions of same */
+ { "ac0", TT0 },
+ { "ac1", TT1 },
+ /* 68ec030 access control unit, identical to 030 MMU status reg */
+ { "acusr", PSR },
+
+ /* Suppressed data and address registers. */
+ { "zd0", ZDATA0 },
+ { "zd1", ZDATA1 },
+ { "zd2", ZDATA2 },
+ { "zd3", ZDATA3 },
+ { "zd4", ZDATA4 },
+ { "zd5", ZDATA5 },
+ { "zd6", ZDATA6 },
+ { "zd7", ZDATA7 },
+ { "za0", ZADDR0 },
+ { "za1", ZADDR1 },
+ { "za2", ZADDR2 },
+ { "za3", ZADDR3 },
+ { "za4", ZADDR4 },
+ { "za5", ZADDR5 },
+ { "za6", ZADDR6 },
+ { "za7", ZADDR7 },
+
+ /* Upper and lower data and address registers, used by macw and msacw. */
+ { "d0l", DATA0L },
+ { "d1l", DATA1L },
+ { "d2l", DATA2L },
+ { "d3l", DATA3L },
+ { "d4l", DATA4L },
+ { "d5l", DATA5L },
+ { "d6l", DATA6L },
+ { "d7l", DATA7L },
+
+ { "a0l", ADDR0L },
+ { "a1l", ADDR1L },
+ { "a2l", ADDR2L },
+ { "a3l", ADDR3L },
+ { "a4l", ADDR4L },
+ { "a5l", ADDR5L },
+ { "a6l", ADDR6L },
+ { "a7l", ADDR7L },
+
+ { "d0u", DATA0U },
+ { "d1u", DATA1U },
+ { "d2u", DATA2U },
+ { "d3u", DATA3U },
+ { "d4u", DATA4U },
+ { "d5u", DATA5U },
+ { "d6u", DATA6U },
+ { "d7u", DATA7U },
+
+ { "a0u", ADDR0U },
+ { "a1u", ADDR1U },
+ { "a2u", ADDR2U },
+ { "a3u", ADDR3U },
+ { "a4u", ADDR4U },
+ { "a5u", ADDR5U },
+ { "a6u", ADDR6U },
+ { "a7u", ADDR7U },
+
+ { 0, 0 }
+};
+
+static void
+init_regtable ()
+{
+ int i;
+ for (i = 0; init_table[i].name; i++)
+ insert_reg (init_table[i].name, init_table[i].number);
+}
+
+static int no_68851, no_68881;
+
+#ifdef OBJ_AOUT
+/* a.out machine type. Default to 68020. */
+int m68k_aout_machtype = 2;
#endif
- );
- } /* default current_architecture */
-
- bzero((char *)(&the_ins),sizeof(the_ins)); /* JF for paranoia sake */
- m68k_ip(str);
- er=the_ins.error;
- if(!er) {
- for(n=the_ins.numargs;n;--n)
- if(the_ins.operands[n].error) {
- er=the_ins.operands[n].error;
- break;
- }
- }
- if(er) {
- as_bad("\"%s\" -- Statement '%s' ignored",er,str);
- return;
- }
- if(the_ins.nfrag==0) { /* No frag hacking involved; just put it out */
- toP=frag_more(2*the_ins.numo);
- fromP= &the_ins.opcode[0];
- for(m=the_ins.numo;m;--m) {
- md_number_to_chars(toP,(long)(*fromP),2);
- toP+=2;
- fromP++;
+void
+md_assemble (str)
+ char *str;
+{
+ const char *er;
+ short *fromP;
+ char *toP = NULL;
+ int m, n = 0;
+ char *to_beg_P;
+ int shorts_this_frag;
+ fixS *fixP;
+
+ /* In MRI mode, the instruction and operands are separated by a
+ space. Anything following the operands is a comment. The label
+ has already been removed. */
+ if (flag_mri)
+ {
+ char *s;
+ int fields = 0;
+ int infield = 0;
+ int inquote = 0;
+
+ for (s = str; *s != '\0'; s++)
+ {
+ if ((*s == ' ' || *s == '\t') && ! inquote)
+ {
+ if (infield)
+ {
+ ++fields;
+ if (fields >= 2)
+ {
+ *s = '\0';
+ break;
+ }
+ infield = 0;
}
- /* put out symbol-dependent info */
- for(m=0;m<the_ins.nrel;m++) {
- switch(the_ins.reloc[m].wid) {
- case 'B':
- n=1;
- break;
- case 'b':
- n=1;
- break;
- case '3':
- n=2;
- break;
- case 'w':
- n=2;
- break;
- case 'l':
- n=4;
- break;
- default:
- as_fatal("Don't know how to figure width of %c in md_assemble()",the_ins.reloc[m].wid);
- }
+ }
+ else
+ {
+ if (! infield)
+ infield = 1;
+ if (*s == '\'')
+ inquote = ! inquote;
+ }
+ }
+ }
- fix_new(frag_now,
- (toP-frag_now->fr_literal)-the_ins.numo*2+the_ins.reloc[m].n,
- n,
- the_ins.reloc[m].add,
- the_ins.reloc[m].sub,
- the_ins.reloc[m].off,
- the_ins.reloc[m].pcrel,
- NO_RELOC);
- }
- return;
+ memset ((char *) (&the_ins), '\0', sizeof (the_ins));
+ m68k_ip (str);
+ er = the_ins.error;
+ if (!er)
+ {
+ for (n = 0; n < the_ins.numargs; n++)
+ if (the_ins.operands[n].error)
+ {
+ er = the_ins.operands[n].error;
+ break;
+ }
+ }
+ if (er)
+ {
+ as_bad (_("%s -- statement `%s' ignored"), er, str);
+ return;
+ }
+
+ /* If there is a current label, record that it marks an instruction. */
+ if (current_label != NULL)
+ {
+ current_label->text = 1;
+ current_label = NULL;
+ }
+
+ if (the_ins.nfrag == 0)
+ {
+ /* No frag hacking involved; just put it out */
+ toP = frag_more (2 * the_ins.numo);
+ fromP = &the_ins.opcode[0];
+ for (m = the_ins.numo; m; --m)
+ {
+ md_number_to_chars (toP, (long) (*fromP), 2);
+ toP += 2;
+ fromP++;
+ }
+ /* put out symbol-dependent info */
+ for (m = 0; m < the_ins.nrel; m++)
+ {
+ switch (the_ins.reloc[m].wid)
+ {
+ case 'B':
+ n = 1;
+ break;
+ case 'b':
+ n = 1;
+ break;
+ case '3':
+ n = 1;
+ break;
+ case 'w':
+ case 'W':
+ n = 2;
+ break;
+ case 'l':
+ n = 4;
+ break;
+ default:
+ as_fatal (_("Don't know how to figure width of %c in md_assemble()"),
+ the_ins.reloc[m].wid);
+ }
+
+ fixP = fix_new_exp (frag_now,
+ ((toP - frag_now->fr_literal)
+ - the_ins.numo * 2 + the_ins.reloc[m].n),
+ n,
+ &the_ins.reloc[m].exp,
+ the_ins.reloc[m].pcrel,
+ get_reloc_code (n, the_ins.reloc[m].pcrel,
+ the_ins.reloc[m].pic_reloc));
+ fixP->fx_pcrel_adjust = the_ins.reloc[m].pcrel_fix;
+ if (the_ins.reloc[m].wid == 'B')
+ fixP->fx_signed = 1;
}
+ return;
+ }
- /* There's some frag hacking */
- for(n=0,fromP= &the_ins.opcode[0];n<the_ins.nfrag;n++) {
- int wid;
-
- if(n==0) wid=2*the_ins.fragb[n].fragoff;
- else wid=2*(the_ins.numo-the_ins.fragb[n-1].fragoff);
- toP=frag_more(wid);
- to_beg_P=toP;
- shorts_this_frag=0;
- for(m=wid/2;m;--m) {
- md_number_to_chars(toP,(long)(*fromP),2);
- toP+=2;
- fromP++;
- shorts_this_frag++;
- }
- for(m=0;m<the_ins.nrel;m++) {
- if((the_ins.reloc[m].n)>= 2*shorts_this_frag /* 2*the_ins.fragb[n].fragoff */) {
- the_ins.reloc[m].n-= 2*shorts_this_frag /* 2*the_ins.fragb[n].fragoff */;
- break;
- }
- wid=the_ins.reloc[m].wid;
- if(wid==0)
- continue;
- the_ins.reloc[m].wid=0;
- wid = (wid=='b') ? 1 : (wid=='w') ? 2 : (wid=='l') ? 4 : 4000;
-
- fix_new(frag_now,
- (toP-frag_now->fr_literal)-the_ins.numo*2+the_ins.reloc[m].n,
- wid,
- the_ins.reloc[m].add,
- the_ins.reloc[m].sub,
- the_ins.reloc[m].off,
- the_ins.reloc[m].pcrel,
- NO_RELOC);
- }
- /* know(the_ins.fragb[n].fadd); */
- (void)frag_var(rs_machine_dependent,10,0,(relax_substateT)(the_ins.fragb[n].fragty),
- the_ins.fragb[n].fadd,the_ins.fragb[n].foff,to_beg_P);
+ /* There's some frag hacking */
+ {
+ /* Calculate the max frag size. */
+ int wid;
+
+ wid = 2 * the_ins.fragb[0].fragoff;
+ for (n = 1; n < the_ins.nfrag; n++)
+ wid += 2 * (the_ins.numo - the_ins.fragb[n - 1].fragoff);
+ /* frag_var part. */
+ wid += 10;
+ /* Make sure the whole insn fits in one chunk, in particular that
+ the var part is attached, as we access one byte before the
+ variable frag for byte branches. */
+ frag_grow (wid);
+ }
+
+ for (n = 0, fromP = &the_ins.opcode[0]; n < the_ins.nfrag; n++)
+ {
+ int wid;
+
+ if (n == 0)
+ wid = 2 * the_ins.fragb[n].fragoff;
+ else
+ wid = 2 * (the_ins.numo - the_ins.fragb[n - 1].fragoff);
+ toP = frag_more (wid);
+ to_beg_P = toP;
+ shorts_this_frag = 0;
+ for (m = wid / 2; m; --m)
+ {
+ md_number_to_chars (toP, (long) (*fromP), 2);
+ toP += 2;
+ fromP++;
+ shorts_this_frag++;
}
- n=(the_ins.numo-the_ins.fragb[n-1].fragoff);
- shorts_this_frag=0;
- if(n) {
- toP=frag_more(n*sizeof(short));
- while(n--) {
- md_number_to_chars(toP,(long)(*fromP),2);
- toP+=2;
- fromP++;
- shorts_this_frag++;
- }
+ for (m = 0; m < the_ins.nrel; m++)
+ {
+ if ((the_ins.reloc[m].n) >= 2 * shorts_this_frag)
+ {
+ the_ins.reloc[m].n -= 2 * shorts_this_frag;
+ break;
+ }
+ wid = the_ins.reloc[m].wid;
+ if (wid == 0)
+ continue;
+ the_ins.reloc[m].wid = 0;
+ wid = (wid == 'b') ? 1 : (wid == 'w') ? 2 : (wid == 'l') ? 4 : 4000;
+
+ fixP = fix_new_exp (frag_now,
+ ((toP - frag_now->fr_literal)
+ - the_ins.numo * 2 + the_ins.reloc[m].n),
+ wid,
+ &the_ins.reloc[m].exp,
+ the_ins.reloc[m].pcrel,
+ get_reloc_code (wid, the_ins.reloc[m].pcrel,
+ the_ins.reloc[m].pic_reloc));
+ fixP->fx_pcrel_adjust = the_ins.reloc[m].pcrel_fix;
}
- for(m=0;m<the_ins.nrel;m++) {
- int wid;
-
- wid=the_ins.reloc[m].wid;
- if(wid==0)
- continue;
- the_ins.reloc[m].wid=0;
- wid = (wid=='b') ? 1 : (wid=='w') ? 2 : (wid=='l') ? 4 : 4000;
-
- fix_new(frag_now,
- (the_ins.reloc[m].n + toP-frag_now->fr_literal)-/* the_ins.numo */ shorts_this_frag*2,
- wid,
- the_ins.reloc[m].add,
- the_ins.reloc[m].sub,
- the_ins.reloc[m].off,
- the_ins.reloc[m].pcrel,
- NO_RELOC);
+ (void) frag_var (rs_machine_dependent, 10, 0,
+ (relax_substateT) (the_ins.fragb[n].fragty),
+ the_ins.fragb[n].fadd, the_ins.fragb[n].foff, to_beg_P);
+ }
+ n = (the_ins.numo - the_ins.fragb[n - 1].fragoff);
+ shorts_this_frag = 0;
+ if (n)
+ {
+ toP = frag_more (n * sizeof (short));
+ while (n--)
+ {
+ md_number_to_chars (toP, (long) (*fromP), 2);
+ toP += 2;
+ fromP++;
+ shorts_this_frag++;
}
+ }
+ for (m = 0; m < the_ins.nrel; m++)
+ {
+ int wid;
+
+ wid = the_ins.reloc[m].wid;
+ if (wid == 0)
+ continue;
+ the_ins.reloc[m].wid = 0;
+ wid = (wid == 'b') ? 1 : (wid == 'w') ? 2 : (wid == 'l') ? 4 : 4000;
+
+ fixP = fix_new_exp (frag_now,
+ ((the_ins.reloc[m].n + toP - frag_now->fr_literal)
+ - shorts_this_frag * 2),
+ wid,
+ &the_ins.reloc[m].exp,
+ the_ins.reloc[m].pcrel,
+ get_reloc_code (wid, the_ins.reloc[m].pcrel,
+ the_ins.reloc[m].pic_reloc));
+ fixP->fx_pcrel_adjust = the_ins.reloc[m].pcrel_fix;
+ }
}
-/* This function is called once, at assembler startup time. This should
- set up all the tables, etc that the MD part of the assembler needs
- */
void
-md_begin()
+md_begin ()
{
-/*
- * md_begin -- set up hash tables with 68000 instructions.
- * similar to what the vax assembler does. ---phr
- */
- /* RMS claims the thing to do is take the m68k-opcode.h table, and make
- a copy of it at runtime, adding in the information we want but isn't
- there. I think it'd be better to have an awk script hack the table
- at compile time. Or even just xstr the table and use it as-is. But
- my lord ghod hath spoken, so we do it this way. Excuse the ugly var
- names. */
-
- register const struct m68k_opcode *ins;
- register struct m68k_incant *hack,
- *slak;
- register char *retval = 0; /* empty string, or error msg text */
- register unsigned int i;
- register char c;
-
- if ((op_hash = hash_new()) == NULL)
- as_fatal("Virtual memory exhausted");
-
- obstack_begin(&robyn,4000);
- for (ins = m68k_opcodes; ins < endop; ins++) {
- hack=slak=(struct m68k_incant *)obstack_alloc(&robyn,sizeof(struct m68k_incant));
- do {
- /* we *could* ignore insns that don't match our
- arch here but just leaving them out of the
- hash. */
- slak->m_operands=ins->args;
- slak->m_opnum=strlen(slak->m_operands)/2;
- slak->m_arch = ins->arch;
- slak->m_opcode=ins->opcode;
- /* This is kludgey */
- slak->m_codenum=((ins->match)&0xffffL) ? 2 : 1;
- if((ins+1)!=endop && !strcmp(ins->name,(ins+1)->name)) {
- slak->m_next=(struct m68k_incant *) obstack_alloc(&robyn,sizeof(struct m68k_incant));
- ins++;
- } else
- slak->m_next=0;
- slak=slak->m_next;
- } while(slak);
-
- retval = hash_insert (op_hash, ins->name,(char *)hack);
- /* Didn't his mommy tell him about null pointers? */
- if(retval && *retval)
- as_fatal("Internal Error: Can't hash %s: %s",ins->name,retval);
+ /*
+ * md_begin -- set up hash tables with 68000 instructions.
+ * similar to what the vax assembler does. ---phr
+ */
+ /* RMS claims the thing to do is take the m68k-opcode.h table, and make
+ a copy of it at runtime, adding in the information we want but isn't
+ there. I think it'd be better to have an awk script hack the table
+ at compile time. Or even just xstr the table and use it as-is. But
+ my lord ghod hath spoken, so we do it this way. Excuse the ugly var
+ names. */
+
+ register const struct m68k_opcode *ins;
+ register struct m68k_incant *hack, *slak;
+ register const char *retval = 0; /* empty string, or error msg text */
+ register int i;
+ register char c;
+
+ if (flag_mri)
+ {
+ flag_reg_prefix_optional = 1;
+ m68k_abspcadd = 1;
+ if (! m68k_rel32_from_cmdline)
+ m68k_rel32 = 0;
+ }
+
+ op_hash = hash_new ();
+
+ obstack_begin (&robyn, 4000);
+ for (i = 0; i < m68k_numopcodes; i++)
+ {
+ hack = slak = (struct m68k_incant *) obstack_alloc (&robyn, sizeof (struct m68k_incant));
+ do
+ {
+ ins = &m68k_opcodes[i];
+ /* We *could* ignore insns that don't match our arch here
+ but just leaving them out of the hash. */
+ slak->m_operands = ins->args;
+ slak->m_opnum = strlen (slak->m_operands) / 2;
+ slak->m_arch = ins->arch;
+ slak->m_opcode = ins->opcode;
+ /* This is kludgey */
+ slak->m_codenum = ((ins->match) & 0xffffL) ? 2 : 1;
+ if (i + 1 != m68k_numopcodes
+ && !strcmp (ins->name, m68k_opcodes[i + 1].name))
+ {
+ slak->m_next = (struct m68k_incant *) obstack_alloc (&robyn, sizeof (struct m68k_incant));
+ i++;
+ }
+ else
+ slak->m_next = 0;
+ slak = slak->m_next;
}
+ while (slak);
+
+ retval = hash_insert (op_hash, ins->name, (char *) hack);
+ if (retval)
+ as_fatal (_("Internal Error: Can't hash %s: %s"), ins->name, retval);
+ }
+
+ for (i = 0; i < m68k_numaliases; i++)
+ {
+ const char *name = m68k_opcode_aliases[i].primary;
+ const char *alias = m68k_opcode_aliases[i].alias;
+ PTR val = hash_find (op_hash, name);
+ if (!val)
+ as_fatal (_("Internal Error: Can't find %s in hash table"), name);
+ retval = hash_insert (op_hash, alias, val);
+ if (retval)
+ as_fatal (_("Internal Error: Can't hash %s: %s"), alias, retval);
+ }
- for (i = 0; i < sizeof(mklower_table) ; i++)
- mklower_table[i] = (isupper(c = (char) i)) ? tolower(c) : c;
+ /* In MRI mode, all unsized branches are variable sized. Normally,
+ they are word sized. */
+ if (flag_mri)
+ {
+ static struct m68k_opcode_alias mri_aliases[] =
+ {
+ { "bhi", "jhi", },
+ { "bls", "jls", },
+ { "bcc", "jcc", },
+ { "bcs", "jcs", },
+ { "bne", "jne", },
+ { "beq", "jeq", },
+ { "bvc", "jvc", },
+ { "bvs", "jvs", },
+ { "bpl", "jpl", },
+ { "bmi", "jmi", },
+ { "bge", "jge", },
+ { "blt", "jlt", },
+ { "bgt", "jgt", },
+ { "ble", "jle", },
+ { "bra", "jra", },
+ { "bsr", "jbsr", },
+ };
- for (i = 0 ; i < sizeof(notend_table) ; i++) {
- notend_table[i] = 0;
- alt_notend_table[i] = 0;
+ for (i = 0;
+ i < (int) (sizeof mri_aliases / sizeof mri_aliases[0]);
+ i++)
+ {
+ const char *name = mri_aliases[i].primary;
+ const char *alias = mri_aliases[i].alias;
+ PTR val = hash_find (op_hash, name);
+ if (!val)
+ as_fatal (_("Internal Error: Can't find %s in hash table"), name);
+ retval = hash_jam (op_hash, alias, val);
+ if (retval)
+ as_fatal (_("Internal Error: Can't hash %s: %s"), alias, retval);
}
- notend_table[','] = 1;
- notend_table['{'] = 1;
- notend_table['}'] = 1;
- alt_notend_table['a'] = 1;
- alt_notend_table['A'] = 1;
- alt_notend_table['d'] = 1;
- alt_notend_table['D'] = 1;
- alt_notend_table['#'] = 1;
- alt_notend_table['f'] = 1;
- alt_notend_table['F'] = 1;
+ }
+
+ for (i = 0; i < (int) sizeof (mklower_table); i++)
+ mklower_table[i] = (isupper (c = (char) i)) ? tolower (c) : c;
+
+ for (i = 0; i < (int) sizeof (notend_table); i++)
+ {
+ notend_table[i] = 0;
+ alt_notend_table[i] = 0;
+ }
+ notend_table[','] = 1;
+ notend_table['{'] = 1;
+ notend_table['}'] = 1;
+ alt_notend_table['a'] = 1;
+ alt_notend_table['A'] = 1;
+ alt_notend_table['d'] = 1;
+ alt_notend_table['D'] = 1;
+ alt_notend_table['#'] = 1;
+ alt_notend_table['&'] = 1;
+ alt_notend_table['f'] = 1;
+ alt_notend_table['F'] = 1;
#ifdef REGISTER_PREFIX
- alt_notend_table[REGISTER_PREFIX] = 1;
+ alt_notend_table[REGISTER_PREFIX] = 1;
+#endif
+
+ /* We need to put '(' in alt_notend_table to handle
+ cas2 %d0:%d2,%d3:%d4,(%a0):(%a1)
+ */
+ alt_notend_table['('] = 1;
+
+ /* We need to put '@' in alt_notend_table to handle
+ cas2 %d0:%d2,%d3:%d4,@(%d0):@(%d1)
+ */
+ alt_notend_table['@'] = 1;
+
+ /* We need to put digits in alt_notend_table to handle
+ bfextu %d0{24:1},%d0
+ */
+ alt_notend_table['0'] = 1;
+ alt_notend_table['1'] = 1;
+ alt_notend_table['2'] = 1;
+ alt_notend_table['3'] = 1;
+ alt_notend_table['4'] = 1;
+ alt_notend_table['5'] = 1;
+ alt_notend_table['6'] = 1;
+ alt_notend_table['7'] = 1;
+ alt_notend_table['8'] = 1;
+ alt_notend_table['9'] = 1;
+
+#ifndef MIT_SYNTAX_ONLY
+ /* Insert pseudo ops, these have to go into the opcode table since
+ gas expects pseudo ops to start with a dot */
+ {
+ int n = 0;
+ while (mote_pseudo_table[n].poc_name)
+ {
+ hack = (struct m68k_incant *)
+ obstack_alloc (&robyn, sizeof (struct m68k_incant));
+ hash_insert (op_hash,
+ mote_pseudo_table[n].poc_name, (char *) hack);
+ hack->m_operands = 0;
+ hack->m_opnum = n;
+ n++;
+ }
+ }
+#endif
+
+ init_regtable ();
+
+#ifdef OBJ_ELF
+ record_alignment (text_section, 2);
+ record_alignment (data_section, 2);
+ record_alignment (bss_section, 2);
#endif
}
-#if 0
-#define notend(s) ((*s == ',' || *s == '}' || *s == '{' \
- || (*s == ':' && strchr("aAdD#", s[1]))) \
- ? 0 : 1)
+static void
+select_control_regs ()
+{
+ /* Note which set of "movec" control registers is available. */
+ switch (cpu_of_arch (current_architecture))
+ {
+ case m68000:
+ control_regs = m68000_control_regs;
+ break;
+ case m68010:
+ control_regs = m68010_control_regs;
+ break;
+ case m68020:
+ case m68030:
+ control_regs = m68020_control_regs;
+ break;
+ case m68040:
+ control_regs = m68040_control_regs;
+ break;
+ case m68060:
+ control_regs = m68060_control_regs;
+ break;
+ case cpu32:
+ control_regs = cpu32_control_regs;
+ break;
+ case mcf5200:
+ case mcf5206e:
+ case mcf5307:
+ case mcf5407:
+ control_regs = mcf_control_regs;
+ break;
+ default:
+ abort ();
+ }
+}
+
+void
+m68k_init_after_args ()
+{
+ if (cpu_of_arch (current_architecture) == 0)
+ {
+ int i;
+ const char *default_cpu = TARGET_CPU;
+
+ if (*default_cpu == 'm')
+ default_cpu++;
+ for (i = 0; i < n_archs; i++)
+ if (strcasecmp (default_cpu, archs[i].name) == 0)
+ break;
+ if (i == n_archs)
+ {
+ as_bad (_("unrecognized default cpu `%s' ???"), TARGET_CPU);
+ current_architecture |= m68020;
+ }
+ else
+ current_architecture |= archs[i].arch;
+ }
+ /* Permit m68881 specification with all cpus; those that can't work
+ with a coprocessor could be doing emulation. */
+ if (current_architecture & m68851)
+ {
+ if (current_architecture & m68040)
+ {
+ as_warn (_("68040 and 68851 specified; mmu instructions may assemble incorrectly"));
+ }
+ }
+ /* What other incompatibilities could we check for? */
+
+ /* Toss in some default assumptions about coprocessors. */
+ if (!no_68881
+ && (cpu_of_arch (current_architecture)
+ /* Can CPU32 have a 68881 coprocessor?? */
+ & (m68020 | m68030 | cpu32)))
+ {
+ current_architecture |= m68881;
+ }
+ if (!no_68851
+ && (cpu_of_arch (current_architecture) & m68020up) != 0
+ && (cpu_of_arch (current_architecture) & m68040up) == 0)
+ {
+ current_architecture |= m68851;
+ }
+ if (no_68881 && (current_architecture & m68881))
+ as_bad (_("options for 68881 and no-68881 both given"));
+ if (no_68851 && (current_architecture & m68851))
+ as_bad (_("options for 68851 and no-68851 both given"));
+
+#ifdef OBJ_AOUT
+ /* Work out the magic number. This isn't very general. */
+ if (current_architecture & m68000)
+ m68k_aout_machtype = 0;
+ else if (current_architecture & m68010)
+ m68k_aout_machtype = 1;
+ else if (current_architecture & m68020)
+ m68k_aout_machtype = 2;
+ else
+ m68k_aout_machtype = 2;
#endif
-/* This funciton is called once, before the assembler exits. It is
- supposed to do any final cleanup for this part of the assembler.
- */
+ /* Note which set of "movec" control registers is available. */
+ select_control_regs ();
+
+ if (cpu_of_arch (current_architecture) < m68020
+ || arch_coldfire_p (current_architecture))
+ md_relax_table[TAB (PCINDEX, BYTE)].rlx_more = 0;
+}
+\f
+/* This is called when a label is defined. */
+
+void
+m68k_frob_label (sym)
+ symbolS *sym;
+{
+ struct label_line *n;
+
+ n = (struct label_line *) xmalloc (sizeof *n);
+ n->next = labels;
+ n->label = sym;
+ as_where (&n->file, &n->line);
+ n->text = 0;
+ labels = n;
+ current_label = n;
+}
+
+/* This is called when a value that is not an instruction is emitted. */
+
+void
+m68k_flush_pending_output ()
+{
+ current_label = NULL;
+}
+
+/* This is called at the end of the assembly, when the final value of
+ the label is known. We warn if this is a text symbol aligned at an
+ odd location. */
+
+void
+m68k_frob_symbol (sym)
+ symbolS *sym;
+{
+ if (S_GET_SEGMENT (sym) == reg_section
+ && (int) S_GET_VALUE (sym) < 0)
+ {
+ S_SET_SEGMENT (sym, absolute_section);
+ S_SET_VALUE (sym, ~(int)S_GET_VALUE (sym));
+ }
+ else if ((S_GET_VALUE (sym) & 1) != 0)
+ {
+ struct label_line *l;
+
+ for (l = labels; l != NULL; l = l->next)
+ {
+ if (l->label == sym)
+ {
+ if (l->text)
+ as_warn_where (l->file, l->line,
+ _("text label `%s' aligned to odd boundary"),
+ S_GET_NAME (sym));
+ break;
+ }
+ }
+ }
+}
+\f
+/* This is called if we go in or out of MRI mode because of the .mri
+ pseudo-op. */
+
void
-md_end()
+m68k_mri_mode_change (on)
+ int on;
{
+ if (on)
+ {
+ if (! flag_reg_prefix_optional)
+ {
+ flag_reg_prefix_optional = 1;
+#ifdef REGISTER_PREFIX
+ init_regtable ();
+#endif
+ }
+ m68k_abspcadd = 1;
+ if (! m68k_rel32_from_cmdline)
+ m68k_rel32 = 0;
+ }
+ else
+ {
+ if (! reg_prefix_optional_seen)
+ {
+#ifdef REGISTER_PREFIX_OPTIONAL
+ flag_reg_prefix_optional = REGISTER_PREFIX_OPTIONAL;
+#else
+ flag_reg_prefix_optional = 0;
+#endif
+#ifdef REGISTER_PREFIX
+ init_regtable ();
+#endif
+ }
+ m68k_abspcadd = 0;
+ if (! m68k_rel32_from_cmdline)
+ m68k_rel32 = 1;
+ }
}
/* Equal to MAX_PRECISION in atof-ieee.c */
#define MAX_LITTLENUMS 6
-/* Turn a string in input_line_pointer into a floating point constant of type
- type, and store the appropriate bytes in *litP. The number of LITTLENUMS
- emitted is stored in *sizeP . An error message is returned, or NULL on OK.
- */
+/* Turn a string in input_line_pointer into a floating point constant
+ of type TYPE, and store the appropriate bytes in *LITP. The number
+ of LITTLENUMS emitted is stored in *SIZEP. An error message is
+ returned, or NULL on OK. */
+
char *
-md_atof(type,litP,sizeP)
-char type;
-char *litP;
-int *sizeP;
-{
- int prec;
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- LITTLENUM_TYPE *wordP;
- char *t;
- char *atof_ieee();
-
- switch(type) {
- case 'f':
- case 'F':
- case 's':
- case 'S':
- prec = 2;
- break;
+md_atof (type, litP, sizeP)
+ char type;
+ char *litP;
+ int *sizeP;
+{
+ int prec;
+ LITTLENUM_TYPE words[MAX_LITTLENUMS];
+ LITTLENUM_TYPE *wordP;
+ char *t;
+
+ switch (type)
+ {
+ case 'f':
+ case 'F':
+ case 's':
+ case 'S':
+ prec = 2;
+ break;
+
+ case 'd':
+ case 'D':
+ case 'r':
+ case 'R':
+ prec = 4;
+ break;
+
+ case 'x':
+ case 'X':
+ prec = 6;
+ break;
+
+ case 'p':
+ case 'P':
+ prec = 6;
+ break;
+
+ default:
+ *sizeP = 0;
+ return _("Bad call to MD_ATOF()");
+ }
+ t = atof_ieee (input_line_pointer, type, words);
+ if (t)
+ input_line_pointer = t;
+
+ *sizeP = prec * sizeof (LITTLENUM_TYPE);
+ for (wordP = words; prec--;)
+ {
+ md_number_to_chars (litP, (long) (*wordP++), sizeof (LITTLENUM_TYPE));
+ litP += sizeof (LITTLENUM_TYPE);
+ }
+ return 0;
+}
- case 'd':
- case 'D':
- case 'r':
- case 'R':
- prec = 4;
- break;
+void
+md_number_to_chars (buf, val, n)
+ char *buf;
+ valueT val;
+ int n;
+{
+ number_to_chars_bigendian (buf, val, n);
+}
- case 'x':
- case 'X':
- prec = 6;
- break;
+static void
+md_apply_fix_2 (fixP, val)
+ fixS *fixP;
+ offsetT val;
+{
+ addressT upper_limit;
+ offsetT lower_limit;
+
+ /* This is unnecessary but it convinces the native rs6000 compiler
+ to generate the code we want. */
+ char *buf = fixP->fx_frag->fr_literal;
+ buf += fixP->fx_where;
+ /* end ibm compiler workaround */
+
+ val = ((val & 0xffffffff) ^ 0x80000000) - 0x80000000;
+
+#ifdef OBJ_ELF
+ if (fixP->fx_addsy)
+ {
+ memset (buf, 0, fixP->fx_size);
+ fixP->fx_addnumber = val; /* Remember value for emit_reloc */
+
+ if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ && !S_IS_DEFINED (fixP->fx_addsy)
+ && !S_IS_WEAK (fixP->fx_addsy))
+ S_SET_WEAK (fixP->fx_addsy);
+ return;
+ }
+#endif
- case 'p':
- case 'P':
- prec = 6;
- break;
+#ifdef BFD_ASSEMBLER
+ if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ return;
+#endif
- default:
- *sizeP=0;
- return "Bad call to MD_ATOF()";
+ switch (fixP->fx_size)
+ {
+ /* The cast to offsetT below are necessary to make code correct for
+ machines where ints are smaller than offsetT */
+ case 1:
+ *buf++ = val;
+ upper_limit = 0x7f;
+ lower_limit = - (offsetT) 0x80;
+ break;
+ case 2:
+ *buf++ = (val >> 8);
+ *buf++ = val;
+ upper_limit = 0x7fff;
+ lower_limit = - (offsetT) 0x8000;
+ break;
+ case 4:
+ *buf++ = (val >> 24);
+ *buf++ = (val >> 16);
+ *buf++ = (val >> 8);
+ *buf++ = val;
+ upper_limit = 0x7fffffff;
+ lower_limit = - (offsetT) 0x7fffffff - 1; /* avoid constant overflow */
+ break;
+ default:
+ BAD_CASE (fixP->fx_size);
+ }
+
+ /* Fix up a negative reloc. */
+ if (fixP->fx_addsy == NULL && fixP->fx_subsy != NULL)
+ {
+ fixP->fx_addsy = fixP->fx_subsy;
+ fixP->fx_subsy = NULL;
+ fixP->fx_tcbit = 1;
+ }
+
+ /* For non-pc-relative values, it's conceivable we might get something
+ like "0xff" for a byte field. So extend the upper part of the range
+ to accept such numbers. We arbitrarily disallow "-0xff" or "0xff+0xff",
+ so that we can do any range checking at all. */
+ if (! fixP->fx_pcrel && ! fixP->fx_signed)
+ upper_limit = upper_limit * 2 + 1;
+
+ if ((addressT) val > upper_limit
+ && (val > 0 || val < lower_limit))
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("value out of range"));
+
+ /* A one byte PC-relative reloc means a short branch. We can't use
+ a short branch with a value of 0 or -1, because those indicate
+ different opcodes (branches with longer offsets). fixup_segment
+ in write.c may have clobbered fx_pcrel, so we need to examine the
+ reloc type. */
+ if ((fixP->fx_pcrel
+#ifdef BFD_ASSEMBLER
+ || fixP->fx_r_type == BFD_RELOC_8_PCREL
+#endif
+ )
+ && fixP->fx_size == 1
+ && (fixP->fx_addsy == NULL
+ || S_IS_DEFINED (fixP->fx_addsy))
+ && (val == 0 || val == -1))
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("invalid byte branch offset"));
+}
+
+#ifdef BFD_ASSEMBLER
+int
+md_apply_fix (fixP, valp)
+ fixS *fixP;
+ valueT *valp;
+{
+ md_apply_fix_2 (fixP, (addressT) *valp);
+ return 1;
+}
+#else
+void md_apply_fix (fixP, val)
+ fixS *fixP;
+ long val;
+{
+ md_apply_fix_2 (fixP, (addressT) val);
+}
+#endif
+
+/* *fragP has been relaxed to its final size, and now needs to have
+ the bytes inside it modified to conform to the new size There is UGLY
+ MAGIC here. ..
+ */
+static void
+md_convert_frag_1 (fragP)
+ register fragS *fragP;
+{
+ long disp;
+ fixS *fixP;
+
+ /* Address in object code of the displacement. */
+ register int object_address = fragP->fr_fix + fragP->fr_address;
+
+ /* Address in gas core of the place to store the displacement. */
+ /* This convinces the native rs6000 compiler to generate the code we
+ want. */
+ register char *buffer_address = fragP->fr_literal;
+ buffer_address += fragP->fr_fix;
+ /* end ibm compiler workaround */
+
+ /* The displacement of the address, from current location. */
+ disp = fragP->fr_symbol ? S_GET_VALUE (fragP->fr_symbol) : 0;
+ disp = (disp + fragP->fr_offset) - object_address;
+
+#ifdef BFD_ASSEMBLER
+ disp += symbol_get_frag (fragP->fr_symbol)->fr_address;
+#endif
+
+ switch (fragP->fr_subtype)
+ {
+ case TAB (BRANCHBWL, BYTE):
+ case TAB (BRABSJUNC, BYTE):
+ case TAB (BRABSJCOND, BYTE):
+ case TAB (BRANCHBW, BYTE):
+ know (issbyte (disp));
+ if (disp == 0)
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("short branch with zero offset: use :w"));
+ fixP = fix_new (fragP, fragP->fr_fix - 1, 1, fragP->fr_symbol,
+ fragP->fr_offset, 1, RELAX_RELOC_PC8);
+ fixP->fx_pcrel_adjust = -1;
+ break;
+ case TAB (BRANCHBWL, SHORT):
+ case TAB (BRABSJUNC, SHORT):
+ case TAB (BRABSJCOND, SHORT):
+ case TAB (BRANCHBW, SHORT):
+ fragP->fr_opcode[1] = 0x00;
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC16);
+ fragP->fr_fix += 2;
+ break;
+ case TAB (BRANCHBWL, LONG):
+ fragP->fr_opcode[1] = (char) 0xFF;
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC32);
+ fragP->fr_fix += 4;
+ break;
+ case TAB (BRABSJUNC, LONG):
+ if (fragP->fr_opcode[0] == 0x61) /* jbsr */
+ {
+ fragP->fr_opcode[0] = 0x4E;
+ fragP->fr_opcode[1] = (char) 0xB9; /* JSR with ABSL LONG operand */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
+ 0, RELAX_RELOC_ABS32);
+ fragP->fr_fix += 4;
+ }
+ else if (fragP->fr_opcode[0] == 0x60) /* jbra */
+ {
+ fragP->fr_opcode[0] = 0x4E;
+ fragP->fr_opcode[1] = (char) 0xF9; /* JMP with ABSL LONG operand */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
+ 0, RELAX_RELOC_ABS32);
+ fragP->fr_fix += 4;
}
- t=atof_ieee(input_line_pointer,type,words);
- if(t)
- input_line_pointer=t;
-
- *sizeP=prec * sizeof(LITTLENUM_TYPE);
- for(wordP=words;prec--;) {
- md_number_to_chars(litP,(long)(*wordP++),sizeof(LITTLENUM_TYPE));
- litP+=sizeof(LITTLENUM_TYPE);
+ else
+ {
+ /* This cannot happen, because jbsr and jbra are the only two
+ unconditional branches. */
+ abort ();
}
- return ""; /* Someone should teach Dean about null pointers */
+ break;
+ case TAB (BRABSJCOND, LONG):
+ /* Only Bcc 68000 instructions can come here. */
+ /* Change bcc into b!cc/jmp absl long. */
+
+ fragP->fr_opcode[0] ^= 0x01; /* invert bcc */
+ fragP->fr_opcode[1] = 0x6;/* branch offset = 6 */
+
+ /* JF: these used to be fr_opcode[2,3], but they may be in a
+ different frag, in which case refering to them is a no-no.
+ Only fr_opcode[0,1] are guaranteed to work. */
+ *buffer_address++ = 0x4e; /* put in jmp long (0x4ef9) */
+ *buffer_address++ = (char) 0xf9;
+ fragP->fr_fix += 2; /* account for jmp instruction */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol,
+ fragP->fr_offset, 0, RELAX_RELOC_ABS32);
+ fragP->fr_fix += 4;
+ break;
+ case TAB (FBRANCH, SHORT):
+ know ((fragP->fr_opcode[1] & 0x40) == 0);
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC16);
+ fragP->fr_fix += 2;
+ break;
+ case TAB (FBRANCH, LONG):
+ fragP->fr_opcode[1] |= 0x40; /* Turn on LONG bit */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC32);
+ fragP->fr_fix += 4;
+ break;
+ case TAB (DBCCLBR, SHORT):
+ case TAB (DBCCABSJ, SHORT):
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC16);
+ fragP->fr_fix += 2;
+ break;
+ case TAB (DBCCLBR, LONG):
+ /* only DBcc instructions can come here */
+ /* Change dbcc into dbcc/bral. */
+
+ /* JF: these used to be fr_opcode[2-7], but that's wrong */
+ *buffer_address++ = 0x00; /* branch offset = 4 */
+ *buffer_address++ = 0x04;
+ *buffer_address++ = 0x60; /* put in bra pc+6 */
+ *buffer_address++ = 0x06;
+ *buffer_address++ = 0x60; /* Put in bral (0x60ff). */
+ *buffer_address++ = (char) 0xff;
+
+ fragP->fr_fix += 6; /* account for bra/jmp instructions */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset, 1,
+ RELAX_RELOC_PC32);
+ fragP->fr_fix += 4;
+ break;
+ case TAB (DBCCABSJ, LONG):
+ /* only DBcc instructions can come here */
+ /* Change dbcc into dbcc/jmp. */
+
+ /* JF: these used to be fr_opcode[2-7], but that's wrong */
+ *buffer_address++ = 0x00; /* branch offset = 4 */
+ *buffer_address++ = 0x04;
+ *buffer_address++ = 0x60; /* put in bra pc+6 */
+ *buffer_address++ = 0x06;
+ *buffer_address++ = 0x4e; /* Put in jmp long (0x4ef9). */
+ *buffer_address++ = (char) 0xf9;
+
+ fragP->fr_fix += 6; /* account for bra/jmp instructions */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset, 0,
+ RELAX_RELOC_ABS32);
+ fragP->fr_fix += 4;
+ break;
+ case TAB (PCREL1632, SHORT):
+ fragP->fr_opcode[1] &= ~0x3F;
+ fragP->fr_opcode[1] |= 0x3A; /* 072 - mode 7.2 */
+ fix_new (fragP, (int) (fragP->fr_fix), 2, fragP->fr_symbol,
+ fragP->fr_offset, 1, RELAX_RELOC_PC16);
+ fragP->fr_fix += 2;
+ break;
+ case TAB (PCREL1632, LONG):
+ /* Already set to mode 7.3; this indicates: PC indirect with
+ suppressed index, 32-bit displacement. */
+ *buffer_address++ = 0x01;
+ *buffer_address++ = 0x70;
+ fragP->fr_fix += 2;
+ fixP = fix_new (fragP, (int) (fragP->fr_fix), 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, RELAX_RELOC_PC32);
+ fixP->fx_pcrel_adjust = 2;
+ fragP->fr_fix += 4;
+ break;
+ case TAB (PCINDEX, BYTE):
+ assert (fragP->fr_fix >= 2);
+ buffer_address[-2] &= ~1;
+ fixP = fix_new (fragP, fragP->fr_fix - 1, 1, fragP->fr_symbol,
+ fragP->fr_offset, 1, RELAX_RELOC_PC8);
+ fixP->fx_pcrel_adjust = 1;
+ break;
+ case TAB (PCINDEX, SHORT):
+ assert (fragP->fr_fix >= 2);
+ buffer_address[-2] |= 0x1;
+ buffer_address[-1] = 0x20;
+ fixP = fix_new (fragP, (int) (fragP->fr_fix), 2, fragP->fr_symbol,
+ fragP->fr_offset, 1, RELAX_RELOC_PC16);
+ fixP->fx_pcrel_adjust = 2;
+ fragP->fr_fix += 2;
+ break;
+ case TAB (PCINDEX, LONG):
+ assert (fragP->fr_fix >= 2);
+ buffer_address[-2] |= 0x1;
+ buffer_address[-1] = 0x30;
+ fixP = fix_new (fragP, (int) (fragP->fr_fix), 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, RELAX_RELOC_PC32);
+ fixP->fx_pcrel_adjust = 2;
+ fragP->fr_fix += 4;
+ break;
+ case TAB (ABSTOPCREL, SHORT):
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC16);
+ fragP->fr_fix += 2;
+ break;
+ case TAB (ABSTOPCREL, LONG):
+ /* The thing to do here is force it to ABSOLUTE LONG, since
+ ABSTOPCREL is really trying to shorten an ABSOLUTE address anyway */
+ if ((fragP->fr_opcode[1] & 0x3F) != 0x3A)
+ abort ();
+ fragP->fr_opcode[1] &= ~0x3F;
+ fragP->fr_opcode[1] |= 0x39; /* Mode 7.1 */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
+ 0, RELAX_RELOC_ABS32);
+ fragP->fr_fix += 4;
+ break;
+ }
+}
+
+#ifndef BFD_ASSEMBLER
+
+void
+md_convert_frag (headers, sec, fragP)
+ object_headers *headers ATTRIBUTE_UNUSED;
+ segT sec ATTRIBUTE_UNUSED;
+ fragS *fragP;
+{
+ md_convert_frag_1 (fragP);
+}
+
+#else
+
+void
+md_convert_frag (abfd, sec, fragP)
+ bfd *abfd ATTRIBUTE_UNUSED;
+ segT sec ATTRIBUTE_UNUSED;
+ fragS *fragP;
+{
+ md_convert_frag_1 (fragP);
+}
+#endif
+
+/* Force truly undefined symbols to their maximum size, and generally set up
+ the frag list to be relaxed
+ */
+int
+md_estimate_size_before_relax (fragP, segment)
+ register fragS *fragP;
+ segT segment;
+{
+ int old_fix;
+
+ old_fix = fragP->fr_fix;
+
+ /* Handle SZ_UNDEF first, it can be changed to BYTE or SHORT. */
+ switch (fragP->fr_subtype)
+ {
+ case TAB (BRANCHBWL, SZ_UNDEF):
+ case TAB (BRABSJUNC, SZ_UNDEF):
+ case TAB (BRABSJCOND, SZ_UNDEF):
+ {
+ if (S_GET_SEGMENT (fragP->fr_symbol) == segment
+ && relaxable_symbol (fragP->fr_symbol))
+ {
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), BYTE);
+ }
+ else if (flag_short_refs)
+ {
+ /* Symbol is undefined and we want short ref. */
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), SHORT);
+ }
+ else
+ {
+ /* Symbol is still undefined. Make it LONG. */
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), LONG);
+ }
+ break;
+ }
+
+ case TAB (BRANCHBW, SZ_UNDEF):
+ {
+ if (S_GET_SEGMENT (fragP->fr_symbol) == segment
+ && relaxable_symbol (fragP->fr_symbol))
+ {
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), BYTE);
+ }
+ else
+ {
+ /* Symbol is undefined and we don't have long branches. */
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), SHORT);
+ }
+ break;
+ }
+
+ case TAB (FBRANCH, SZ_UNDEF):
+ case TAB (DBCCLBR, SZ_UNDEF):
+ case TAB (DBCCABSJ, SZ_UNDEF):
+ case TAB (PCREL1632, SZ_UNDEF):
+ {
+ if ((S_GET_SEGMENT (fragP->fr_symbol) == segment
+ && relaxable_symbol (fragP->fr_symbol))
+ || flag_short_refs)
+ {
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), SHORT);
+ }
+ else
+ {
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), LONG);
+ }
+ break;
+ }
+
+ case TAB (PCINDEX, SZ_UNDEF):
+ if ((S_GET_SEGMENT (fragP->fr_symbol) == segment
+ && relaxable_symbol (fragP->fr_symbol)))
+ {
+ fragP->fr_subtype = TAB (PCINDEX, BYTE);
+ }
+ else
+ {
+ fragP->fr_subtype = TAB (PCINDEX, LONG);
+ }
+ break;
+
+ case TAB (ABSTOPCREL, SZ_UNDEF):
+ {
+ if ((S_GET_SEGMENT (fragP->fr_symbol) == segment
+ && relaxable_symbol (fragP->fr_symbol)))
+ {
+ fragP->fr_subtype = TAB (ABSTOPCREL, SHORT);
+ }
+ else
+ {
+ fragP->fr_subtype = TAB (ABSTOPCREL, LONG);
+ }
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ /* Now that SZ_UNDEF are taken care of, check others. */
+ switch (fragP->fr_subtype)
+ {
+ case TAB (BRANCHBWL, BYTE):
+ case TAB (BRABSJUNC, BYTE):
+ case TAB (BRABSJCOND, BYTE):
+ case TAB (BRANCHBW, BYTE):
+ /* We can't do a short jump to the next instruction, so in that
+ case we force word mode. At this point S_GET_VALUE should
+ return the offset of the symbol within its frag. If the
+ symbol is at the start of a frag, and it is the next frag
+ with any data in it (usually this is just the next frag, but
+ assembler listings may introduce empty frags), we must use
+ word mode. */
+ if (fragP->fr_symbol && S_GET_VALUE (fragP->fr_symbol) == 0)
+ {
+ fragS *stop;
+ fragS *l;
+
+ stop = symbol_get_frag (fragP->fr_symbol);
+ for (l = fragP->fr_next; l != stop; l = l->fr_next)
+ if (l->fr_fix + l->fr_var != 0)
+ break;
+ if (l == stop)
+ {
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), SHORT);
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length;
+ return fragP->fr_var + fragP->fr_fix - old_fix;
+}
+
+#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
+/* the bit-field entries in the relocation_info struct plays hell
+ with the byte-order problems of cross-assembly. So as a hack,
+ I added this mach. dependent ri twiddler. Ugly, but it gets
+ you there. -KWK */
+/* on m68k: first 4 bytes are normal unsigned long, next three bytes
+ are symbolnum, most sig. byte first. Last byte is broken up with
+ bit 7 as pcrel, bits 6 & 5 as length, bit 4 as pcrel, and the lower
+ nibble as nuthin. (on Sun 3 at least) */
+/* Translate the internal relocation information into target-specific
+ format. */
+#ifdef comment
+void
+md_ri_to_chars (the_bytes, ri)
+ char *the_bytes;
+ struct reloc_info_generic *ri;
+{
+ /* this is easy */
+ md_number_to_chars (the_bytes, ri->r_address, 4);
+ /* now the fun stuff */
+ the_bytes[4] = (ri->r_symbolnum >> 16) & 0x0ff;
+ the_bytes[5] = (ri->r_symbolnum >> 8) & 0x0ff;
+ the_bytes[6] = ri->r_symbolnum & 0x0ff;
+ the_bytes[7] = (((ri->r_pcrel << 7) & 0x80) | ((ri->r_length << 5) & 0x60) |
+ ((ri->r_extern << 4) & 0x10));
+}
+
+#endif /* comment */
+
+#ifndef BFD_ASSEMBLER
+void
+tc_aout_fix_to_chars (where, fixP, segment_address_in_file)
+ char *where;
+ fixS *fixP;
+ relax_addressT segment_address_in_file;
+{
+ /*
+ * In: length of relocation (or of address) in chars: 1, 2 or 4.
+ * Out: GNU LD relocation length code: 0, 1, or 2.
+ */
+
+ static CONST unsigned char nbytes_r_length[] = {42, 0, 1, 42, 2};
+ long r_symbolnum;
+
+ know (fixP->fx_addsy != NULL);
+
+ md_number_to_chars (where,
+ fixP->fx_frag->fr_address + fixP->fx_where - segment_address_in_file,
+ 4);
+
+ r_symbolnum = (S_IS_DEFINED (fixP->fx_addsy)
+ ? S_GET_TYPE (fixP->fx_addsy)
+ : fixP->fx_addsy->sy_number);
+
+ where[4] = (r_symbolnum >> 16) & 0x0ff;
+ where[5] = (r_symbolnum >> 8) & 0x0ff;
+ where[6] = r_symbolnum & 0x0ff;
+ where[7] = (((fixP->fx_pcrel << 7) & 0x80) | ((nbytes_r_length[fixP->fx_size] << 5) & 0x60) |
+ (((!S_IS_DEFINED (fixP->fx_addsy)) << 4) & 0x10));
+}
+#endif
+
+#endif /* OBJ_AOUT or OBJ_BOUT */
+
+#ifndef WORKING_DOT_WORD
+CONST int md_short_jump_size = 4;
+CONST int md_long_jump_size = 6;
+
+void
+md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol)
+ char *ptr;
+ addressT from_addr, to_addr;
+ fragS *frag ATTRIBUTE_UNUSED;
+ symbolS *to_symbol ATTRIBUTE_UNUSED;
+{
+ valueT offset;
+
+ offset = to_addr - (from_addr + 2);
+
+ md_number_to_chars (ptr, (valueT) 0x6000, 2);
+ md_number_to_chars (ptr + 2, (valueT) offset, 2);
+}
+
+void
+md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol)
+ char *ptr;
+ addressT from_addr, to_addr;
+ fragS *frag;
+ symbolS *to_symbol;
+{
+ valueT offset;
+
+ if (!HAVE_LONG_BRANCH(current_architecture))
+ {
+ offset = to_addr - S_GET_VALUE (to_symbol);
+ md_number_to_chars (ptr, (valueT) 0x4EF9, 2);
+ md_number_to_chars (ptr + 2, (valueT) offset, 4);
+ fix_new (frag, (ptr + 2) - frag->fr_literal, 4, to_symbol, (offsetT) 0,
+ 0, NO_RELOC);
+ }
+ else
+ {
+ offset = to_addr - (from_addr + 2);
+ md_number_to_chars (ptr, (valueT) 0x60ff, 2);
+ md_number_to_chars (ptr + 2, (valueT) offset, 4);
+ }
+}
+
+#endif
+
+/* Different values of OK tell what its OK to return. Things that
+ aren't OK are an error (what a shock, no?)
+
+ 0: Everything is OK
+ 10: Absolute 1:8 only
+ 20: Absolute 0:7 only
+ 30: absolute 0:15 only
+ 40: Absolute 0:31 only
+ 50: absolute 0:127 only
+ 55: absolute -64:63 only
+ 60: absolute -128:127 only
+ 70: absolute 0:4095 only
+ 80: No bignums
+
+ */
+
+static int
+get_num (exp, ok)
+ struct m68k_exp *exp;
+ int ok;
+{
+ if (exp->exp.X_op == O_absent)
+ {
+ /* Do the same thing the VAX asm does */
+ op (exp) = O_constant;
+ adds (exp) = 0;
+ subs (exp) = 0;
+ offs (exp) = 0;
+ if (ok == 10)
+ {
+ as_warn (_("expression out of range: defaulting to 1"));
+ offs (exp) = 1;
+ }
+ }
+ else if (exp->exp.X_op == O_constant)
+ {
+ switch (ok)
+ {
+ case 10:
+ if (offs (exp) < 1 || offs (exp) > 8)
+ {
+ as_warn (_("expression out of range: defaulting to 1"));
+ offs (exp) = 1;
+ }
+ break;
+ case 20:
+ if (offs (exp) < 0 || offs (exp) > 7)
+ goto outrange;
+ break;
+ case 30:
+ if (offs (exp) < 0 || offs (exp) > 15)
+ goto outrange;
+ break;
+ case 40:
+ if (offs (exp) < 0 || offs (exp) > 32)
+ goto outrange;
+ break;
+ case 50:
+ if (offs (exp) < 0 || offs (exp) > 127)
+ goto outrange;
+ break;
+ case 55:
+ if (offs (exp) < -64 || offs (exp) > 63)
+ goto outrange;
+ break;
+ case 60:
+ if (offs (exp) < -128 || offs (exp) > 127)
+ goto outrange;
+ break;
+ case 70:
+ if (offs (exp) < 0 || offs (exp) > 4095)
+ {
+ outrange:
+ as_warn (_("expression out of range: defaulting to 0"));
+ offs (exp) = 0;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ else if (exp->exp.X_op == O_big)
+ {
+ if (offs (exp) <= 0 /* flonum */
+ && (ok == 80 /* no bignums */
+ || (ok > 10 /* small-int ranges including 0 ok */
+ /* If we have a flonum zero, a zero integer should
+ do as well (e.g., in moveq). */
+ && generic_floating_point_number.exponent == 0
+ && generic_floating_point_number.low[0] == 0)))
+ {
+ /* HACK! Turn it into a long */
+ LITTLENUM_TYPE words[6];
+
+ gen_to_words (words, 2, 8L); /* These numbers are magic! */
+ op (exp) = O_constant;
+ adds (exp) = 0;
+ subs (exp) = 0;
+ offs (exp) = words[1] | (words[0] << 16);
+ }
+ else if (ok != 0)
+ {
+ op (exp) = O_constant;
+ adds (exp) = 0;
+ subs (exp) = 0;
+ offs (exp) = (ok == 10) ? 1 : 0;
+ as_warn (_("Can't deal with expression; defaulting to %ld"),
+ offs (exp));
+ }
+ }
+ else
+ {
+ if (ok >= 10 && ok <= 70)
+ {
+ op (exp) = O_constant;
+ adds (exp) = 0;
+ subs (exp) = 0;
+ offs (exp) = (ok == 10) ? 1 : 0;
+ as_warn (_("Can't deal with expression; defaulting to %ld"),
+ offs (exp));
+ }
+ }
+
+ if (exp->size != SIZE_UNSPEC)
+ {
+ switch (exp->size)
+ {
+ case SIZE_UNSPEC:
+ case SIZE_LONG:
+ break;
+ case SIZE_BYTE:
+ if (!isbyte (offs (exp)))
+ as_warn (_("expression doesn't fit in BYTE"));
+ break;
+ case SIZE_WORD:
+ if (!isword (offs (exp)))
+ as_warn (_("expression doesn't fit in WORD"));
+ break;
+ }
+ }
+
+ return offs (exp);
+}
+
+/* These are the back-ends for the various machine dependent pseudo-ops. */
+
+static void
+s_data1 (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ subseg_set (data_section, 1);
+ demand_empty_rest_of_line ();
+}
+
+static void
+s_data2 (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ subseg_set (data_section, 2);
+ demand_empty_rest_of_line ();
+}
+
+static void
+s_bss (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ /* We don't support putting frags in the BSS segment, we fake it
+ by marking in_bss, then looking at s_skip for clues. */
+
+ subseg_set (bss_section, 0);
+ demand_empty_rest_of_line ();
+}
+
+static void
+s_even (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ register int temp;
+ register long temp_fill;
+
+ temp = 1; /* JF should be 2? */
+ temp_fill = get_absolute_expression ();
+ if (!need_pass_2) /* Never make frag if expect extra pass. */
+ frag_align (temp, (int) temp_fill, 0);
+ demand_empty_rest_of_line ();
+ record_alignment (now_seg, temp);
+}
+
+static void
+s_proc (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ demand_empty_rest_of_line ();
+}
+\f
+/* Pseudo-ops handled for MRI compatibility. */
+
+/* This function returns non-zero if the argument is a conditional
+ pseudo-op. This is called when checking whether a pending
+ alignment is needed. */
+
+int
+m68k_conditional_pseudoop (pop)
+ pseudo_typeS *pop;
+{
+ return (pop->poc_handler == s_mri_if
+ || pop->poc_handler == s_mri_else);
+}
+
+/* Handle an MRI style chip specification. */
+
+static void
+mri_chip ()
+{
+ char *s;
+ char c;
+ int i;
+
+ s = input_line_pointer;
+ /* We can't use get_symbol_end since the processor names are not proper
+ symbols. */
+ while (is_part_of_name (c = *input_line_pointer++))
+ ;
+ *--input_line_pointer = 0;
+ for (i = 0; i < n_archs; i++)
+ if (strcasecmp (s, archs[i].name) == 0)
+ break;
+ if (i >= n_archs)
+ {
+ as_bad (_("%s: unrecognized processor name"), s);
+ *input_line_pointer = c;
+ ignore_rest_of_line ();
+ return;
+ }
+ *input_line_pointer = c;
+
+ if (*input_line_pointer == '/')
+ current_architecture = 0;
+ else
+ current_architecture &= m68881 | m68851;
+ current_architecture |= archs[i].arch;
+
+ while (*input_line_pointer == '/')
+ {
+ ++input_line_pointer;
+ s = input_line_pointer;
+ /* We can't use get_symbol_end since the processor names are not
+ proper symbols. */
+ while (is_part_of_name (c = *input_line_pointer++))
+ ;
+ *--input_line_pointer = 0;
+ if (strcmp (s, "68881") == 0)
+ current_architecture |= m68881;
+ else if (strcmp (s, "68851") == 0)
+ current_architecture |= m68851;
+ *input_line_pointer = c;
+ }
+
+ /* Update info about available control registers. */
+ select_control_regs ();
+}
+
+/* The MRI CHIP pseudo-op. */
+
+static void
+s_chip (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ char *stop = NULL;
+ char stopc;
+
+ if (flag_mri)
+ stop = mri_comment_field (&stopc);
+ mri_chip ();
+ if (flag_mri)
+ mri_comment_end (stop, stopc);
+ demand_empty_rest_of_line ();
+}
+
+/* The MRI FOPT pseudo-op. */
+
+static void
+s_fopt (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ SKIP_WHITESPACE ();
+
+ if (strncasecmp (input_line_pointer, "ID=", 3) == 0)
+ {
+ int temp;
+
+ input_line_pointer += 3;
+ temp = get_absolute_expression ();
+ if (temp < 0 || temp > 7)
+ as_bad (_("bad coprocessor id"));
+ else
+ m68k_float_copnum = COP0 + temp;
+ }
+ else
+ {
+ as_bad (_("unrecognized fopt option"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ demand_empty_rest_of_line ();
+}
+
+/* The structure used to handle the MRI OPT pseudo-op. */
+
+struct opt_action
+{
+ /* The name of the option. */
+ const char *name;
+
+ /* If this is not NULL, just call this function. The first argument
+ is the ARG field of this structure, the second argument is
+ whether the option was negated. */
+ void (*pfn) PARAMS ((int arg, int on));
+
+ /* If this is not NULL, and the PFN field is NULL, set the variable
+ this points to. Set it to the ARG field if the option was not
+ negated, and the NOTARG field otherwise. */
+ int *pvar;
+
+ /* The value to pass to PFN or to assign to *PVAR. */
+ int arg;
+
+ /* The value to assign to *PVAR if the option is negated. If PFN is
+ NULL, and PVAR is not NULL, and ARG and NOTARG are the same, then
+ the option may not be negated. */
+ int notarg;
+};
+
+/* The table used to handle the MRI OPT pseudo-op. */
+
+static void skip_to_comma PARAMS ((int, int));
+static void opt_nest PARAMS ((int, int));
+static void opt_chip PARAMS ((int, int));
+static void opt_list PARAMS ((int, int));
+static void opt_list_symbols PARAMS ((int, int));
+
+static const struct opt_action opt_table[] =
+{
+ { "abspcadd", 0, &m68k_abspcadd, 1, 0 },
+
+ /* We do relaxing, so there is little use for these options. */
+ { "b", 0, 0, 0, 0 },
+ { "brs", 0, 0, 0, 0 },
+ { "brb", 0, 0, 0, 0 },
+ { "brl", 0, 0, 0, 0 },
+ { "brw", 0, 0, 0, 0 },
+
+ { "c", 0, 0, 0, 0 },
+ { "cex", 0, 0, 0, 0 },
+ { "case", 0, &symbols_case_sensitive, 1, 0 },
+ { "cl", 0, 0, 0, 0 },
+ { "cre", 0, 0, 0, 0 },
+ { "d", 0, &flag_keep_locals, 1, 0 },
+ { "e", 0, 0, 0, 0 },
+ { "f", 0, &flag_short_refs, 1, 0 },
+ { "frs", 0, &flag_short_refs, 1, 0 },
+ { "frl", 0, &flag_short_refs, 0, 1 },
+ { "g", 0, 0, 0, 0 },
+ { "i", 0, 0, 0, 0 },
+ { "m", 0, 0, 0, 0 },
+ { "mex", 0, 0, 0, 0 },
+ { "mc", 0, 0, 0, 0 },
+ { "md", 0, 0, 0, 0 },
+ { "nest", opt_nest, 0, 0, 0 },
+ { "next", skip_to_comma, 0, 0, 0 },
+ { "o", 0, 0, 0, 0 },
+ { "old", 0, 0, 0, 0 },
+ { "op", skip_to_comma, 0, 0, 0 },
+ { "pco", 0, 0, 0, 0 },
+ { "p", opt_chip, 0, 0, 0 },
+ { "pcr", 0, 0, 0, 0 },
+ { "pcs", 0, 0, 0, 0 },
+ { "r", 0, 0, 0, 0 },
+ { "quick", 0, &m68k_quick, 1, 0 },
+ { "rel32", 0, &m68k_rel32, 1, 0 },
+ { "s", opt_list, 0, 0, 0 },
+ { "t", opt_list_symbols, 0, 0, 0 },
+ { "w", 0, &flag_no_warnings, 0, 1 },
+ { "x", 0, 0, 0, 0 }
+};
+
+#define OPTCOUNT ((int) (sizeof opt_table / sizeof opt_table[0]))
+
+/* The MRI OPT pseudo-op. */
+
+static void
+s_opt (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ do
+ {
+ int t;
+ char *s;
+ char c;
+ int i;
+ const struct opt_action *o;
+
+ SKIP_WHITESPACE ();
+
+ t = 1;
+ if (*input_line_pointer == '-')
+ {
+ ++input_line_pointer;
+ t = 0;
+ }
+ else if (strncasecmp (input_line_pointer, "NO", 2) == 0)
+ {
+ input_line_pointer += 2;
+ t = 0;
+ }
+
+ s = input_line_pointer;
+ c = get_symbol_end ();
+
+ for (i = 0, o = opt_table; i < OPTCOUNT; i++, o++)
+ {
+ if (strcasecmp (s, o->name) == 0)
+ {
+ if (o->pfn)
+ {
+ /* Restore input_line_pointer now in case the option
+ takes arguments. */
+ *input_line_pointer = c;
+ (*o->pfn) (o->arg, t);
+ }
+ else if (o->pvar != NULL)
+ {
+ if (! t && o->arg == o->notarg)
+ as_bad (_("option `%s' may not be negated"), s);
+ *input_line_pointer = c;
+ *o->pvar = t ? o->arg : o->notarg;
+ }
+ else
+ *input_line_pointer = c;
+ break;
+ }
+ }
+ if (i >= OPTCOUNT)
+ {
+ as_bad (_("option `%s' not recognized"), s);
+ *input_line_pointer = c;
+ }
+ }
+ while (*input_line_pointer++ == ',');
+
+ /* Move back to terminating character. */
+ --input_line_pointer;
+ demand_empty_rest_of_line ();
+}
+
+/* Skip ahead to a comma. This is used for OPT options which we do
+ not suppor tand which take arguments. */
+
+static void
+skip_to_comma (arg, on)
+ int arg ATTRIBUTE_UNUSED;
+ int on ATTRIBUTE_UNUSED;
+{
+ while (*input_line_pointer != ','
+ && ! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+}
+
+/* Handle the OPT NEST=depth option. */
+
+static void
+opt_nest (arg, on)
+ int arg ATTRIBUTE_UNUSED;
+ int on ATTRIBUTE_UNUSED;
+{
+ if (*input_line_pointer != '=')
+ {
+ as_bad (_("bad format of OPT NEST=depth"));
+ return;
+ }
+
+ ++input_line_pointer;
+ max_macro_nest = get_absolute_expression ();
+}
+
+/* Handle the OPT P=chip option. */
+
+static void
+opt_chip (arg, on)
+ int arg ATTRIBUTE_UNUSED;
+ int on ATTRIBUTE_UNUSED;
+{
+ if (*input_line_pointer != '=')
+ {
+ /* This is just OPT P, which we do not support. */
+ return;
+ }
+
+ ++input_line_pointer;
+ mri_chip ();
+}
+
+/* Handle the OPT S option. */
+
+static void
+opt_list (arg, on)
+ int arg ATTRIBUTE_UNUSED;
+ int on;
+{
+ listing_list (on);
+}
+
+/* Handle the OPT T option. */
+
+static void
+opt_list_symbols (arg, on)
+ int arg ATTRIBUTE_UNUSED;
+ int on;
+{
+ if (on)
+ listing |= LISTING_SYMBOLS;
+ else
+ listing &=~ LISTING_SYMBOLS;
+}
+
+/* Handle the MRI REG pseudo-op. */
+
+static void
+s_reg (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ char *s;
+ int c;
+ struct m68k_op rop;
+ int mask;
+ char *stop = NULL;
+ char stopc;
+
+ if (line_label == NULL)
+ {
+ as_bad (_("missing label"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ if (flag_mri)
+ stop = mri_comment_field (&stopc);
+
+ SKIP_WHITESPACE ();
+
+ s = input_line_pointer;
+ while (isalnum ((unsigned char) *input_line_pointer)
+#ifdef REGISTER_PREFIX
+ || *input_line_pointer == REGISTER_PREFIX
+#endif
+ || *input_line_pointer == '/'
+ || *input_line_pointer == '-')
+ ++input_line_pointer;
+ c = *input_line_pointer;
+ *input_line_pointer = '\0';
+
+ if (m68k_ip_op (s, &rop) != 0)
+ {
+ if (rop.error == NULL)
+ as_bad (_("bad register list"));
+ else
+ as_bad (_("bad register list: %s"), rop.error);
+ *input_line_pointer = c;
+ ignore_rest_of_line ();
+ return;
+ }
+
+ *input_line_pointer = c;
+
+ if (rop.mode == REGLST)
+ mask = rop.mask;
+ else if (rop.mode == DREG)
+ mask = 1 << (rop.reg - DATA0);
+ else if (rop.mode == AREG)
+ mask = 1 << (rop.reg - ADDR0 + 8);
+ else if (rop.mode == FPREG)
+ mask = 1 << (rop.reg - FP0 + 16);
+ else if (rop.mode == CONTROL
+ && rop.reg == FPI)
+ mask = 1 << 24;
+ else if (rop.mode == CONTROL
+ && rop.reg == FPS)
+ mask = 1 << 25;
+ else if (rop.mode == CONTROL
+ && rop.reg == FPC)
+ mask = 1 << 26;
+ else
+ {
+ as_bad (_("bad register list"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ S_SET_SEGMENT (line_label, reg_section);
+ S_SET_VALUE (line_label, ~mask);
+ symbol_set_frag (line_label, &zero_address_frag);
+
+ if (flag_mri)
+ mri_comment_end (stop, stopc);
+
+ demand_empty_rest_of_line ();
+}
+
+/* This structure is used for the MRI SAVE and RESTORE pseudo-ops. */
+
+struct save_opts
+{
+ struct save_opts *next;
+ int abspcadd;
+ int symbols_case_sensitive;
+ int keep_locals;
+ int short_refs;
+ int architecture;
+ int quick;
+ int rel32;
+ int listing;
+ int no_warnings;
+ /* FIXME: We don't save OPT S. */
+};
+
+/* This variable holds the stack of saved options. */
+
+static struct save_opts *save_stack;
+
+/* The MRI SAVE pseudo-op. */
+
+static void
+s_save (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ struct save_opts *s;
+
+ s = (struct save_opts *) xmalloc (sizeof (struct save_opts));
+ s->abspcadd = m68k_abspcadd;
+ s->symbols_case_sensitive = symbols_case_sensitive;
+ s->keep_locals = flag_keep_locals;
+ s->short_refs = flag_short_refs;
+ s->architecture = current_architecture;
+ s->quick = m68k_quick;
+ s->rel32 = m68k_rel32;
+ s->listing = listing;
+ s->no_warnings = flag_no_warnings;
+
+ s->next = save_stack;
+ save_stack = s;
+
+ demand_empty_rest_of_line ();
+}
+
+/* The MRI RESTORE pseudo-op. */
+
+static void
+s_restore (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ struct save_opts *s;
+
+ if (save_stack == NULL)
+ {
+ as_bad (_("restore without save"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ s = save_stack;
+ save_stack = s->next;
+
+ m68k_abspcadd = s->abspcadd;
+ symbols_case_sensitive = s->symbols_case_sensitive;
+ flag_keep_locals = s->keep_locals;
+ flag_short_refs = s->short_refs;
+ current_architecture = s->architecture;
+ m68k_quick = s->quick;
+ m68k_rel32 = s->rel32;
+ listing = s->listing;
+ flag_no_warnings = s->no_warnings;
+
+ free (s);
+
+ demand_empty_rest_of_line ();
+}
+
+/* Types of MRI structured control directives. */
+
+enum mri_control_type
+{
+ mri_for,
+ mri_if,
+ mri_repeat,
+ mri_while
+};
+
+/* This structure is used to stack the MRI structured control
+ directives. */
+
+struct mri_control_info
+{
+ /* The directive within which this one is enclosed. */
+ struct mri_control_info *outer;
+
+ /* The type of directive. */
+ enum mri_control_type type;
+
+ /* Whether an ELSE has been in an IF. */
+ int else_seen;
+
+ /* The add or sub statement at the end of a FOR. */
+ char *incr;
+
+ /* The label of the top of a FOR or REPEAT loop. */
+ char *top;
+
+ /* The label to jump to for the next iteration, or the else
+ expression of a conditional. */
+ char *next;
+
+ /* The label to jump to to break out of the loop, or the label past
+ the end of a conditional. */
+ char *bottom;
+};
+
+/* The stack of MRI structured control directives. */
+
+static struct mri_control_info *mri_control_stack;
+
+/* The current MRI structured control directive index number, used to
+ generate label names. */
+
+static int mri_control_index;
+
+/* Some function prototypes. */
+
+static void mri_assemble PARAMS ((char *));
+static char *mri_control_label PARAMS ((void));
+static struct mri_control_info *push_mri_control
+ PARAMS ((enum mri_control_type));
+static void pop_mri_control PARAMS ((void));
+static int parse_mri_condition PARAMS ((int *));
+static int parse_mri_control_operand
+ PARAMS ((int *, char **, char **, char **, char **));
+static int swap_mri_condition PARAMS ((int));
+static int reverse_mri_condition PARAMS ((int));
+static void build_mri_control_operand
+ PARAMS ((int, int, char *, char *, char *, char *, const char *,
+ const char *, int));
+static void parse_mri_control_expression
+ PARAMS ((char *, int, const char *, const char *, int));
+
+/* Assemble an instruction for an MRI structured control directive. */
+
+static void
+mri_assemble (str)
+ char *str;
+{
+ char *s;
+
+ /* md_assemble expects the opcode to be in lower case. */
+ for (s = str; *s != ' ' && *s != '\0'; s++)
+ {
+ if (isupper ((unsigned char) *s))
+ *s = tolower ((unsigned char) *s);
+ }
+
+ md_assemble (str);
+}
+
+/* Generate a new MRI label structured control directive label name. */
+
+static char *
+mri_control_label ()
+{
+ char *n;
+
+ n = (char *) xmalloc (20);
+ sprintf (n, "%smc%d", FAKE_LABEL_NAME, mri_control_index);
+ ++mri_control_index;
+ return n;
+}
+
+/* Create a new MRI structured control directive. */
+
+static struct mri_control_info *
+push_mri_control (type)
+ enum mri_control_type type;
+{
+ struct mri_control_info *n;
+
+ n = (struct mri_control_info *) xmalloc (sizeof (struct mri_control_info));
+
+ n->type = type;
+ n->else_seen = 0;
+ if (type == mri_if || type == mri_while)
+ n->top = NULL;
+ else
+ n->top = mri_control_label ();
+ n->next = mri_control_label ();
+ n->bottom = mri_control_label ();
+
+ n->outer = mri_control_stack;
+ mri_control_stack = n;
+
+ return n;
+}
+
+/* Pop off the stack of MRI structured control directives. */
+
+static void
+pop_mri_control ()
+{
+ struct mri_control_info *n;
+
+ n = mri_control_stack;
+ mri_control_stack = n->outer;
+ if (n->top != NULL)
+ free (n->top);
+ free (n->next);
+ free (n->bottom);
+ free (n);
+}
+
+/* Recognize a condition code in an MRI structured control expression. */
+
+static int
+parse_mri_condition (pcc)
+ int *pcc;
+{
+ char c1, c2;
+
+ know (*input_line_pointer == '<');
+
+ ++input_line_pointer;
+ c1 = *input_line_pointer++;
+ c2 = *input_line_pointer++;
+
+ if (*input_line_pointer != '>')
+ {
+ as_bad (_("syntax error in structured control directive"));
+ return 0;
+ }
+
+ ++input_line_pointer;
+ SKIP_WHITESPACE ();
+
+ if (isupper (c1))
+ c1 = tolower (c1);
+ if (isupper (c2))
+ c2 = tolower (c2);
+
+ *pcc = (c1 << 8) | c2;
+
+ return 1;
+}
+
+/* Parse a single operand in an MRI structured control expression. */
+
+static int
+parse_mri_control_operand (pcc, leftstart, leftstop, rightstart, rightstop)
+ int *pcc;
+ char **leftstart;
+ char **leftstop;
+ char **rightstart;
+ char **rightstop;
+{
+ char *s;
+
+ SKIP_WHITESPACE ();
+
+ *pcc = -1;
+ *leftstart = NULL;
+ *leftstop = NULL;
+ *rightstart = NULL;
+ *rightstop = NULL;
+
+ if (*input_line_pointer == '<')
+ {
+ /* It's just a condition code. */
+ return parse_mri_condition (pcc);
+ }
+
+ /* Look ahead for the condition code. */
+ for (s = input_line_pointer; *s != '\0'; ++s)
+ {
+ if (*s == '<' && s[1] != '\0' && s[2] != '\0' && s[3] == '>')
+ break;
+ }
+ if (*s == '\0')
+ {
+ as_bad (_("missing condition code in structured control directive"));
+ return 0;
+ }
+
+ *leftstart = input_line_pointer;
+ *leftstop = s;
+ if (*leftstop > *leftstart
+ && ((*leftstop)[-1] == ' ' || (*leftstop)[-1] == '\t'))
+ --*leftstop;
+
+ input_line_pointer = s;
+ if (! parse_mri_condition (pcc))
+ return 0;
+
+ /* Look ahead for AND or OR or end of line. */
+ for (s = input_line_pointer; *s != '\0'; ++s)
+ {
+ /* We must make sure we don't misinterpret AND/OR at the end of labels!
+ if d0 <eq> #FOOAND and d1 <ne> #BAROR then
+ ^^^ ^^ */
+ if ( ( s == input_line_pointer
+ || *(s-1) == ' '
+ || *(s-1) == '\t')
+ && ( ( strncasecmp (s, "AND", 3) == 0
+ && (s[3] == '.' || ! is_part_of_name (s[3])))
+ || ( strncasecmp (s, "OR", 2) == 0
+ && (s[2] == '.' || ! is_part_of_name (s[2])))))
+ break;
+ }
+
+ *rightstart = input_line_pointer;
+ *rightstop = s;
+ if (*rightstop > *rightstart
+ && ((*rightstop)[-1] == ' ' || (*rightstop)[-1] == '\t'))
+ --*rightstop;
+
+ input_line_pointer = s;
+
+ return 1;
+}
+
+#define MCC(b1, b2) (((b1) << 8) | (b2))
+
+/* Swap the sense of a condition. This changes the condition so that
+ it generates the same result when the operands are swapped. */
+
+static int
+swap_mri_condition (cc)
+ int cc;
+{
+ switch (cc)
+ {
+ case MCC ('h', 'i'): return MCC ('c', 's');
+ case MCC ('l', 's'): return MCC ('c', 'c');
+ /* <HS> is an alias for <CC> */
+ case MCC ('h', 's'):
+ case MCC ('c', 'c'): return MCC ('l', 's');
+ /* <LO> is an alias for <CS> */
+ case MCC ('l', 'o'):
+ case MCC ('c', 's'): return MCC ('h', 'i');
+ case MCC ('p', 'l'): return MCC ('m', 'i');
+ case MCC ('m', 'i'): return MCC ('p', 'l');
+ case MCC ('g', 'e'): return MCC ('l', 'e');
+ case MCC ('l', 't'): return MCC ('g', 't');
+ case MCC ('g', 't'): return MCC ('l', 't');
+ case MCC ('l', 'e'): return MCC ('g', 'e');
+ /* issue a warning for conditions we can not swap */
+ case MCC ('n', 'e'): return MCC ('n', 'e'); // no problem here
+ case MCC ('e', 'q'): return MCC ('e', 'q'); // also no problem
+ case MCC ('v', 'c'):
+ case MCC ('v', 's'):
+ default :
+ as_warn (_("Condition <%c%c> in structured control directive can not be encoded correctly"),
+ (char) (cc >> 8), (char) (cc));
+ break;
+ }
+ return cc;
+}
+
+/* Reverse the sense of a condition. */
+
+static int
+reverse_mri_condition (cc)
+ int cc;
+{
+ switch (cc)
+ {
+ case MCC ('h', 'i'): return MCC ('l', 's');
+ case MCC ('l', 's'): return MCC ('h', 'i');
+ /* <HS> is an alias for <CC> */
+ case MCC ('h', 's'): return MCC ('l', 'o');
+ case MCC ('c', 'c'): return MCC ('c', 's');
+ /* <LO> is an alias for <CS> */
+ case MCC ('l', 'o'): return MCC ('h', 's');
+ case MCC ('c', 's'): return MCC ('c', 'c');
+ case MCC ('n', 'e'): return MCC ('e', 'q');
+ case MCC ('e', 'q'): return MCC ('n', 'e');
+ case MCC ('v', 'c'): return MCC ('v', 's');
+ case MCC ('v', 's'): return MCC ('v', 'c');
+ case MCC ('p', 'l'): return MCC ('m', 'i');
+ case MCC ('m', 'i'): return MCC ('p', 'l');
+ case MCC ('g', 'e'): return MCC ('l', 't');
+ case MCC ('l', 't'): return MCC ('g', 'e');
+ case MCC ('g', 't'): return MCC ('l', 'e');
+ case MCC ('l', 'e'): return MCC ('g', 't');
+ }
+ return cc;
+}
+
+/* Build an MRI structured control expression. This generates test
+ and branch instructions. It goes to TRUELAB if the condition is
+ true, and to FALSELAB if the condition is false. Exactly one of
+ TRUELAB and FALSELAB will be NULL, meaning to fall through. QUAL
+ is the size qualifier for the expression. EXTENT is the size to
+ use for the branch. */
+
+static void
+build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, truelab, falselab, extent)
+ int qual;
+ int cc;
+ char *leftstart;
+ char *leftstop;
+ char *rightstart;
+ char *rightstop;
+ const char *truelab;
+ const char *falselab;
+ int extent;
+{
+ char *buf;
+ char *s;
+
+ if (leftstart != NULL)
+ {
+ struct m68k_op leftop, rightop;
+ char c;
+
+ /* Swap the compare operands, if necessary, to produce a legal
+ m68k compare instruction. Comparing a register operand with
+ a non-register operand requires the register to be on the
+ right (cmp, cmpa). Comparing an immediate value with
+ anything requires the immediate value to be on the left
+ (cmpi). */
+
+ c = *leftstop;
+ *leftstop = '\0';
+ (void) m68k_ip_op (leftstart, &leftop);
+ *leftstop = c;
+
+ c = *rightstop;
+ *rightstop = '\0';
+ (void) m68k_ip_op (rightstart, &rightop);
+ *rightstop = c;
+
+ if (rightop.mode == IMMED
+ || ((leftop.mode == DREG || leftop.mode == AREG)
+ && (rightop.mode != DREG && rightop.mode != AREG)))
+ {
+ char *temp;
+
+ /* Correct conditional handling:
+ if #1 <lt> d0 then ;means if (1 < d0)
+ ...
+ endi
+
+ should assemble to:
+
+ cmp #1,d0 if we do *not* swap the operands
+ bgt true we need the swapped condition!
+ ble false
+ true:
+ ...
+ false:
+ */
+ temp = leftstart;
+ leftstart = rightstart;
+ rightstart = temp;
+ temp = leftstop;
+ leftstop = rightstop;
+ rightstop = temp;
+ } else {
+ cc = swap_mri_condition (cc);
+ }
+ }
+
+ if (truelab == NULL)
+ {
+ cc = reverse_mri_condition (cc);
+ truelab = falselab;
+ }
+
+ if (leftstart != NULL)
+ {
+ buf = (char *) xmalloc (20
+ + (leftstop - leftstart)
+ + (rightstop - rightstart));
+ s = buf;
+ *s++ = 'c';
+ *s++ = 'm';
+ *s++ = 'p';
+ if (qual != '\0')
+ *s++ = tolower(qual);
+ *s++ = ' ';
+ memcpy (s, leftstart, leftstop - leftstart);
+ s += leftstop - leftstart;
+ *s++ = ',';
+ memcpy (s, rightstart, rightstop - rightstart);
+ s += rightstop - rightstart;
+ *s = '\0';
+ mri_assemble (buf);
+ free (buf);
+ }
+
+ buf = (char *) xmalloc (20 + strlen (truelab));
+ s = buf;
+ *s++ = 'b';
+ *s++ = cc >> 8;
+ *s++ = cc & 0xff;
+ if (extent != '\0')
+ *s++ = tolower(extent);
+ *s++ = ' ';
+ strcpy (s, truelab);
+ mri_assemble (buf);
+ free (buf);
+}
+
+/* Parse an MRI structured control expression. This generates test
+ and branch instructions. STOP is where the expression ends. It
+ goes to TRUELAB if the condition is true, and to FALSELAB if the
+ condition is false. Exactly one of TRUELAB and FALSELAB will be
+ NULL, meaning to fall through. QUAL is the size qualifier for the
+ expression. EXTENT is the size to use for the branch. */
+
+static void
+parse_mri_control_expression (stop, qual, truelab, falselab, extent)
+ char *stop;
+ int qual;
+ const char *truelab;
+ const char *falselab;
+ int extent;
+{
+ int c;
+ int cc;
+ char *leftstart;
+ char *leftstop;
+ char *rightstart;
+ char *rightstop;
+
+ c = *stop;
+ *stop = '\0';
+
+ if (! parse_mri_control_operand (&cc, &leftstart, &leftstop,
+ &rightstart, &rightstop))
+ {
+ *stop = c;
+ return;
+ }
+
+ if (strncasecmp (input_line_pointer, "AND", 3) == 0)
+ {
+ const char *flab;
+
+ if (falselab != NULL)
+ flab = falselab;
+ else
+ flab = mri_control_label ();
+
+ build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, (const char *) NULL, flab, extent);
+
+ input_line_pointer += 3;
+ if (*input_line_pointer != '.'
+ || input_line_pointer[1] == '\0')
+ qual = '\0';
+ else
+ {
+ qual = input_line_pointer[1];
+ input_line_pointer += 2;
+ }
+
+ if (! parse_mri_control_operand (&cc, &leftstart, &leftstop,
+ &rightstart, &rightstop))
+ {
+ *stop = c;
+ return;
+ }
+
+ build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, truelab, falselab, extent);
+
+ if (falselab == NULL)
+ colon (flab);
+ }
+ else if (strncasecmp (input_line_pointer, "OR", 2) == 0)
+ {
+ const char *tlab;
+
+ if (truelab != NULL)
+ tlab = truelab;
+ else
+ tlab = mri_control_label ();
+
+ build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, tlab, (const char *) NULL, extent);
+
+ input_line_pointer += 2;
+ if (*input_line_pointer != '.'
+ || input_line_pointer[1] == '\0')
+ qual = '\0';
+ else
+ {
+ qual = input_line_pointer[1];
+ input_line_pointer += 2;
+ }
+
+ if (! parse_mri_control_operand (&cc, &leftstart, &leftstop,
+ &rightstart, &rightstop))
+ {
+ *stop = c;
+ return;
+ }
+
+ build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, truelab, falselab, extent);
+
+ if (truelab == NULL)
+ colon (tlab);
+ }
+ else
+ {
+ build_mri_control_operand (qual, cc, leftstart, leftstop, rightstart,
+ rightstop, truelab, falselab, extent);
+ }
+
+ *stop = c;
+ if (input_line_pointer != stop)
+ as_bad (_("syntax error in structured control directive"));
+}
+
+/* Handle the MRI IF pseudo-op. This may be a structured control
+ directive, or it may be a regular assembler conditional, depending
+ on its operands. */
+
+static void
+s_mri_if (qual)
+ int qual;
+{
+ char *s;
+ int c;
+ struct mri_control_info *n;
+
+ /* A structured control directive must end with THEN with an
+ optional qualifier. */
+ s = input_line_pointer;
+ /* We only accept '*' as introduction of comments if preceded by white space
+ or at first column of a line (I think this can't actually happen here?)
+ This is important when assembling:
+ if d0 <ne> 12(a0,d0*2) then
+ if d0 <ne> #CONST*20 then */
+ while ( ! ( is_end_of_line[(unsigned char) *s]
+ || ( flag_mri
+ && *s == '*'
+ && ( s == input_line_pointer
+ || *(s-1) == ' '
+ || *(s-1) == '\t'))))
+ ++s;
+ --s;
+ while (s > input_line_pointer && (*s == ' ' || *s == '\t'))
+ --s;
+
+ if (s - input_line_pointer > 1
+ && s[-1] == '.')
+ s -= 2;
+
+ if (s - input_line_pointer < 3
+ || strncasecmp (s - 3, "THEN", 4) != 0)
+ {
+ if (qual != '\0')
+ {
+ as_bad (_("missing then"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ /* It's a conditional. */
+ s_if (O_ne);
+ return;
+ }
+
+ /* Since this might be a conditional if, this pseudo-op will be
+ called even if we are supported to be ignoring input. Double
+ check now. Clobber *input_line_pointer so that ignore_input
+ thinks that this is not a special pseudo-op. */
+ c = *input_line_pointer;
+ *input_line_pointer = 0;
+ if (ignore_input ())
+ {
+ *input_line_pointer = c;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ demand_empty_rest_of_line ();
+ return;
+ }
+ *input_line_pointer = c;
+
+ n = push_mri_control (mri_if);
+
+ parse_mri_control_expression (s - 3, qual, (const char *) NULL,
+ n->next, s[1] == '.' ? s[2] : '\0');
+
+ if (s[1] == '.')
+ input_line_pointer = s + 3;
+ else
+ input_line_pointer = s + 1;
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
+ demand_empty_rest_of_line ();
+}
+
+/* Handle the MRI else pseudo-op. If we are currently doing an MRI
+ structured IF, associate the ELSE with the IF. Otherwise, assume
+ it is a conditional else. */
+
+static void
+s_mri_else (qual)
+ int qual;
+{
+ int c;
+ char *buf;
+ char q[2];
+
+ if (qual == '\0'
+ && (mri_control_stack == NULL
+ || mri_control_stack->type != mri_if
+ || mri_control_stack->else_seen))
+ {
+ s_else (0);
+ return;
+ }
+
+ c = *input_line_pointer;
+ *input_line_pointer = 0;
+ if (ignore_input ())
+ {
+ *input_line_pointer = c;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ demand_empty_rest_of_line ();
+ return;
+ }
+ *input_line_pointer = c;
+
+ if (mri_control_stack == NULL
+ || mri_control_stack->type != mri_if
+ || mri_control_stack->else_seen)
+ {
+ as_bad (_("else without matching if"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ mri_control_stack->else_seen = 1;
+
+ buf = (char *) xmalloc (20 + strlen (mri_control_stack->bottom));
+ q[0] = tolower(qual);
+ q[1] = '\0';
+ sprintf (buf, "bra%s %s", q, mri_control_stack->bottom);
+ mri_assemble (buf);
+ free (buf);
+
+ colon (mri_control_stack->next);
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
+ demand_empty_rest_of_line ();
+}
+
+/* Handle the MRI ENDI pseudo-op. */
+
+static void
+s_mri_endi (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ if (mri_control_stack == NULL
+ || mri_control_stack->type != mri_if)
+ {
+ as_bad (_("endi without matching if"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ /* ignore_input will not return true for ENDI, so we don't need to
+ worry about checking it again here. */
+
+ if (! mri_control_stack->else_seen)
+ colon (mri_control_stack->next);
+ colon (mri_control_stack->bottom);
+
+ pop_mri_control ();
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
+ demand_empty_rest_of_line ();
}
-/* Turn an integer of n bytes (in val) into a stream of bytes appropriate
- for use in the a.out file, and stores them in the array pointed to by buf.
- This knows about the endian-ness of the target machine and does
- THE RIGHT THING, whatever it is. Possible values for n are 1 (byte)
- 2 (short) and 4 (long) Floating numbers are put out as a series of
- LITTLENUMS (shorts, here at least)
- */
-void
-md_number_to_chars(buf,val,n)
-char *buf;
-long val;
-int n;
+/* Handle the MRI BREAK pseudo-op. */
+
+static void
+s_mri_break (extent)
+ int extent;
{
- switch(n) {
- case 1:
- *buf++=val;
- break;
- case 2:
- *buf++=(val>>8);
- *buf++=val;
- break;
- case 4:
- *buf++=(val>>24);
- *buf++=(val>>16);
- *buf++=(val>>8);
- *buf++=val;
- break;
- default:
- as_fatal("failed sanity check.");
- }
+ struct mri_control_info *n;
+ char *buf;
+ char ex[2];
+
+ n = mri_control_stack;
+ while (n != NULL
+ && n->type != mri_for
+ && n->type != mri_repeat
+ && n->type != mri_while)
+ n = n->outer;
+ if (n == NULL)
+ {
+ as_bad (_("break outside of structured loop"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ buf = (char *) xmalloc (20 + strlen (n->bottom));
+ ex[0] = tolower(extent);
+ ex[1] = '\0';
+ sprintf (buf, "bra%s %s", ex, n->bottom);
+ mri_assemble (buf);
+ free (buf);
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
+ demand_empty_rest_of_line ();
}
-void
-md_apply_fix(fixP, val)
- fixS *fixP;
- long val;
+/* Handle the MRI NEXT pseudo-op. */
+
+static void
+s_mri_next (extent)
+ int extent;
{
- char *buf = fixP->fx_where + fixP->fx_frag->fr_literal;
+ struct mri_control_info *n;
+ char *buf;
+ char ex[2];
+
+ n = mri_control_stack;
+ while (n != NULL
+ && n->type != mri_for
+ && n->type != mri_repeat
+ && n->type != mri_while)
+ n = n->outer;
+ if (n == NULL)
+ {
+ as_bad (_("next outside of structured loop"));
+ ignore_rest_of_line ();
+ return;
+ }
- switch(fixP->fx_size) {
- case 1:
- *buf++=val;
- break;
- case 2:
- *buf++=(val>>8);
- *buf++=val;
- break;
- case 4:
- *buf++=(val>>24);
- *buf++=(val>>16);
- *buf++=(val>>8);
- *buf++=val;
- break;
- default:
- BAD_CASE (fixP->fx_size);
- }
+ buf = (char *) xmalloc (20 + strlen (n->next));
+ ex[0] = tolower(extent);
+ ex[1] = '\0';
+ sprintf (buf, "bra%s %s", ex, n->next);
+ mri_assemble (buf);
+ free (buf);
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
+ demand_empty_rest_of_line ();
}
+/* Handle the MRI FOR pseudo-op. */
-/* *fragP has been relaxed to its final size, and now needs to have
- the bytes inside it modified to conform to the new size There is UGLY
- MAGIC here. ..
- */
-void
-md_convert_frag(headers, fragP)
-object_headers *headers;
-register fragS *fragP;
+static void
+s_mri_for (qual)
+ int qual;
{
- long disp;
- long ext = 0;
+ const char *varstart, *varstop;
+ const char *initstart, *initstop;
+ const char *endstart, *endstop;
+ const char *bystart, *bystop;
+ int up;
+ int by;
+ int extent;
+ struct mri_control_info *n;
+ char *buf;
+ char *s;
+ char ex[2];
+
+ /* The syntax is
+ FOR.q var = init { TO | DOWNTO } end [ BY by ] DO.e
+ */
+
+ SKIP_WHITESPACE ();
+ varstart = input_line_pointer;
+
+ /* Look for the '='. */
+ while (! is_end_of_line[(unsigned char) *input_line_pointer]
+ && *input_line_pointer != '=')
+ ++input_line_pointer;
+ if (*input_line_pointer != '=')
+ {
+ as_bad (_("missing ="));
+ ignore_rest_of_line ();
+ return;
+ }
- /* Address in object code of the displacement. */
- register int object_address = fragP -> fr_fix + fragP -> fr_address;
-
-#ifdef IBM_COMPILER_SUX
- /* This is wrong but it convinces the native rs6000 compiler to
- generate the code we want. */
- register char *buffer_address = fragP -> fr_literal;
- buffer_address += fragP -> fr_fix;
-#else /* IBM_COMPILER_SUX */
- /* Address in gas core of the place to store the displacement. */
- register char *buffer_address = fragP->fr_fix + fragP->fr_literal;
-#endif /* IBM_COMPILER_SUX */
+ varstop = input_line_pointer;
+ if (varstop > varstart
+ && (varstop[-1] == ' ' || varstop[-1] == '\t'))
+ --varstop;
+
+ ++input_line_pointer;
+
+ initstart = input_line_pointer;
+
+ /* Look for TO or DOWNTO. */
+ up = 1;
+ initstop = NULL;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ if (strncasecmp (input_line_pointer, "TO", 2) == 0
+ && ! is_part_of_name (input_line_pointer[2]))
+ {
+ initstop = input_line_pointer;
+ input_line_pointer += 2;
+ break;
+ }
+ if (strncasecmp (input_line_pointer, "DOWNTO", 6) == 0
+ && ! is_part_of_name (input_line_pointer[6]))
+ {
+ initstop = input_line_pointer;
+ up = 0;
+ input_line_pointer += 6;
+ break;
+ }
+ ++input_line_pointer;
+ }
+ if (initstop == NULL)
+ {
+ as_bad (_("missing to or downto"));
+ ignore_rest_of_line ();
+ return;
+ }
+ if (initstop > initstart
+ && (initstop[-1] == ' ' || initstop[-1] == '\t'))
+ --initstop;
+
+ SKIP_WHITESPACE ();
+ endstart = input_line_pointer;
+
+ /* Look for BY or DO. */
+ by = 0;
+ endstop = NULL;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ if (strncasecmp (input_line_pointer, "BY", 2) == 0
+ && ! is_part_of_name (input_line_pointer[2]))
+ {
+ endstop = input_line_pointer;
+ by = 1;
+ input_line_pointer += 2;
+ break;
+ }
+ if (strncasecmp (input_line_pointer, "DO", 2) == 0
+ && (input_line_pointer[2] == '.'
+ || ! is_part_of_name (input_line_pointer[2])))
+ {
+ endstop = input_line_pointer;
+ input_line_pointer += 2;
+ break;
+ }
+ ++input_line_pointer;
+ }
+ if (endstop == NULL)
+ {
+ as_bad (_("missing do"));
+ ignore_rest_of_line ();
+ return;
+ }
+ if (endstop > endstart
+ && (endstop[-1] == ' ' || endstop[-1] == '\t'))
+ --endstop;
+
+ if (! by)
+ {
+ bystart = "#1";
+ bystop = bystart + 2;
+ }
+ else
+ {
+ SKIP_WHITESPACE ();
+ bystart = input_line_pointer;
+
+ /* Look for DO. */
+ bystop = NULL;
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ if (strncasecmp (input_line_pointer, "DO", 2) == 0
+ && (input_line_pointer[2] == '.'
+ || ! is_part_of_name (input_line_pointer[2])))
+ {
+ bystop = input_line_pointer;
+ input_line_pointer += 2;
+ break;
+ }
+ ++input_line_pointer;
+ }
+ if (bystop == NULL)
+ {
+ as_bad (_("missing do"));
+ ignore_rest_of_line ();
+ return;
+ }
+ if (bystop > bystart
+ && (bystop[-1] == ' ' || bystop[-1] == '\t'))
+ --bystop;
+ }
- /* No longer true: know(fragP->fr_symbol); */
+ if (*input_line_pointer != '.')
+ extent = '\0';
+ else
+ {
+ extent = input_line_pointer[1];
+ input_line_pointer += 2;
+ }
- /* The displacement of the address, from current location. */
- disp = fragP->fr_symbol ? S_GET_VALUE(fragP->fr_symbol) : 0;
- disp = (disp + fragP->fr_offset) - object_address;
+ /* We have fully parsed the FOR operands. Now build the loop. */
+
+ n = push_mri_control (mri_for);
+
+ buf = (char *) xmalloc (50 + (input_line_pointer - varstart));
+
+ /* move init,var */
+ s = buf;
+ *s++ = 'm';
+ *s++ = 'o';
+ *s++ = 'v';
+ *s++ = 'e';
+ if (qual != '\0')
+ *s++ = tolower(qual);
+ *s++ = ' ';
+ memcpy (s, initstart, initstop - initstart);
+ s += initstop - initstart;
+ *s++ = ',';
+ memcpy (s, varstart, varstop - varstart);
+ s += varstop - varstart;
+ *s = '\0';
+ mri_assemble (buf);
+
+ colon (n->top);
+
+ /* cmp end,var */
+ s = buf;
+ *s++ = 'c';
+ *s++ = 'm';
+ *s++ = 'p';
+ if (qual != '\0')
+ *s++ = tolower(qual);
+ *s++ = ' ';
+ memcpy (s, endstart, endstop - endstart);
+ s += endstop - endstart;
+ *s++ = ',';
+ memcpy (s, varstart, varstop - varstart);
+ s += varstop - varstart;
+ *s = '\0';
+ mri_assemble (buf);
+
+ /* bcc bottom */
+ ex[0] = tolower(extent);
+ ex[1] = '\0';
+ if (up)
+ sprintf (buf, "blt%s %s", ex, n->bottom);
+ else
+ sprintf (buf, "bgt%s %s", ex, n->bottom);
+ mri_assemble (buf);
+
+ /* Put together the add or sub instruction used by ENDF. */
+ s = buf;
+ if (up)
+ strcpy (s, "add");
+ else
+ strcpy (s, "sub");
+ s += 3;
+ if (qual != '\0')
+ *s++ = tolower(qual);
+ *s++ = ' ';
+ memcpy (s, bystart, bystop - bystart);
+ s += bystop - bystart;
+ *s++ = ',';
+ memcpy (s, varstart, varstop - varstart);
+ s += varstop - varstart;
+ *s = '\0';
+ n->incr = buf;
+
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
- switch(fragP->fr_subtype) {
- case TAB(BCC68000,BYTE):
- case TAB(BRANCH,BYTE):
- know(issbyte(disp));
- if(disp==0)
- as_bad("short branch with zero offset: use :w");
- fragP->fr_opcode[1]=disp;
- ext=0;
- break;
- case TAB(DBCC,SHORT):
- know(issword(disp));
- ext=2;
- break;
- case TAB(BCC68000,SHORT):
- case TAB(BRANCH,SHORT):
- know(issword(disp));
- fragP->fr_opcode[1]=0x00;
- ext=2;
- break;
- case TAB(BRANCH,LONG):
- if (cpu_of_arch(current_architecture) < m68020) {
- if (fragP->fr_opcode[0]==0x61) {
- fragP->fr_opcode[0]= 0x4E;
- fragP->fr_opcode[1]= 0xB9; /* JBSR with ABSL LONG offset */
- subseg_change(SEG_TEXT, 0);
-
- fix_new(fragP,
- fragP->fr_fix,
- 4,
- fragP->fr_symbol,
- 0,
- fragP->fr_offset,
- 0,
- NO_RELOC);
-
- fragP->fr_fix+=4;
- ext=0;
- } else if (fragP->fr_opcode[0]==0x60) {
- fragP->fr_opcode[0]= 0x4E;
- fragP->fr_opcode[1]= 0xF9; /* JMP with ABSL LONG offset */
- subseg_change(SEG_TEXT, 0);
- fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0, fragP->fr_offset,0,
- NO_RELOC);
- fragP->fr_fix+=4;
- ext=0;
- } else {
- as_bad("Long branch offset not supported.");
- }
- } else {
- fragP->fr_opcode[1]=0xff;
- ext=4;
- }
- break;
- case TAB(BCC68000,LONG):
- /* only Bcc 68000 instructions can come here */
- /* change bcc into b!cc/jmp absl long */
- fragP->fr_opcode[0] ^= 0x01; /* invert bcc */
- fragP->fr_opcode[1] = 0x6; /* branch offset = 6 */
-
- /* JF: these used to be fr_opcode[2,3], but they may be in a
- different frag, in which case refering to them is a no-no.
- Only fr_opcode[0,1] are guaranteed to work. */
- *buffer_address++ = 0x4e; /* put in jmp long (0x4ef9) */
- *buffer_address++ = 0xf9;
- fragP->fr_fix += 2; /* account for jmp instruction */
- subseg_change(SEG_TEXT,0);
- fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0,
- fragP->fr_offset,0,
- NO_RELOC);
- fragP->fr_fix += 4;
- ext=0;
- break;
- case TAB(DBCC,LONG):
- /* only DBcc 68000 instructions can come here */
- /* change dbcc into dbcc/jmp absl long */
- /* JF: these used to be fr_opcode[2-7], but that's wrong */
- *buffer_address++ = 0x00; /* branch offset = 4 */
- *buffer_address++ = 0x04;
- *buffer_address++ = 0x60; /* put in bra pc+6 */
- *buffer_address++ = 0x06;
- *buffer_address++ = 0x4e; /* put in jmp long (0x4ef9) */
- *buffer_address++ = 0xf9;
-
- fragP->fr_fix += 6; /* account for bra/jmp instructions */
- subseg_change(SEG_TEXT,0);
- fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0,
- fragP->fr_offset,0,
- NO_RELOC);
- fragP->fr_fix += 4;
- ext=0;
- break;
- case TAB(FBRANCH,SHORT):
- know((fragP->fr_opcode[1]&0x40)==0);
- ext=2;
- break;
- case TAB(FBRANCH,LONG):
- fragP->fr_opcode[1]|=0x40; /* Turn on LONG bit */
- ext=4;
- break;
- case TAB(PCREL,SHORT):
- ext=2;
- break;
- case TAB(PCREL,LONG):
- /* The thing to do here is force it to ABSOLUTE LONG, since
- PCREL is really trying to shorten an ABSOLUTE address anyway */
- /* JF FOO This code has not been tested */
- subseg_change(SEG_TEXT,0);
- fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0, fragP->fr_offset, 0, NO_RELOC);
- if((fragP->fr_opcode[1] & 0x3F) != 0x3A)
- as_bad("Internal error (long PC-relative operand) for insn 0x%04lx at 0x%lx",
- fragP->fr_opcode[0],fragP->fr_address);
- fragP->fr_opcode[1]&= ~0x3F;
- fragP->fr_opcode[1]|=0x39; /* Mode 7.1 */
- fragP->fr_fix+=4;
- /* md_number_to_chars(buffer_address,
- (long)(fragP->fr_symbol->sy_value + fragP->fr_offset),
- 4); */
- ext=0;
- break;
- case TAB(PCLEA,SHORT):
- subseg_change(SEG_TEXT,0);
- fix_new(fragP,(int)(fragP->fr_fix),2,fragP->fr_symbol,(symbolS *)0,fragP->fr_offset,1,
- NO_RELOC);
- fragP->fr_opcode[1] &= ~0x3F;
- fragP->fr_opcode[1] |= 0x3A;
- ext=2;
- break;
- case TAB(PCLEA,LONG):
- subseg_change(SEG_TEXT,0);
- fix_new(fragP,(int)(fragP->fr_fix)+2,4,fragP->fr_symbol,(symbolS *)0,fragP->fr_offset+2,1,
- NO_RELOC);
- *buffer_address++ = 0x01;
- *buffer_address++ = 0x70;
- fragP->fr_fix+=2;
- /* buffer_address+=2; */
- ext=4;
- break;
-
- } /* switch on subtype */
-
- if (ext) {
- md_number_to_chars(buffer_address, (long) disp, (int) ext);
- fragP->fr_fix += ext;
-/* H_SET_TEXT_SIZE(headers, H_GET_TEXT_SIZE(headers) + ext); */
- } /* if extending */
-
- return;
-} /* md_convert_frag() */
+ demand_empty_rest_of_line ();
+}
-/* Force truly undefined symbols to their maximum size, and generally set up
- the frag list to be relaxed
- */
-int md_estimate_size_before_relax(fragP, segment)
-register fragS *fragP;
-segT segment;
+/* Handle the MRI ENDF pseudo-op. */
+
+static void
+s_mri_endf (ignore)
+ int ignore ATTRIBUTE_UNUSED;
{
- int old_fix;
- register char *buffer_address = fragP->fr_fix + fragP->fr_literal;
+ if (mri_control_stack == NULL
+ || mri_control_stack->type != mri_for)
+ {
+ as_bad (_("endf without for"));
+ ignore_rest_of_line ();
+ return;
+ }
- old_fix = fragP->fr_fix;
+ colon (mri_control_stack->next);
- /* handle SZ_UNDEF first, it can be changed to BYTE or SHORT */
- switch(fragP->fr_subtype) {
+ mri_assemble (mri_control_stack->incr);
- case TAB(BCC68000,SZ_UNDEF): {
- if((fragP->fr_symbol != NULL)
- && S_GET_SEGMENT(fragP->fr_symbol) == segment) {
- fragP->fr_subtype=TAB(BCC68000,BYTE);
- break;
- }
- /* only Bcc 68000 instructions can come here */
- /* change bcc into b!cc/jmp absl long */
- fragP->fr_opcode[0] ^= 0x01; /* invert bcc */
- if(flagseen['l']) {
- fragP->fr_opcode[1] = 0x04; /* branch offset = 6 */
- /* JF: these were fr_opcode[2,3] */
- buffer_address[0] = 0x4e; /* put in jmp long (0x4ef9) */
- buffer_address[1] = 0xf8;
- fragP->fr_fix += 2; /* account for jmp instruction */
- subseg_change(SEG_TEXT,0);
- fix_new(fragP, fragP->fr_fix, 2, fragP->fr_symbol, 0,
- fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix += 2;
- } else {
- fragP->fr_opcode[1] = 0x06; /* branch offset = 6 */
- /* JF: these were fr_opcode[2,3] */
- buffer_address[2] = 0x4e; /* put in jmp long (0x4ef9) */
- buffer_address[3] = 0xf9;
- fragP->fr_fix += 2; /* account for jmp instruction */
- subseg_change(SEG_TEXT,0);
- fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0,
- fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix += 4;
- }
- frag_wane(fragP);
- break;
- } /* case TAB(BCC68000,SZ_UNDEF) */
+ sprintf (mri_control_stack->incr, "bra %s", mri_control_stack->top);
+ mri_assemble (mri_control_stack->incr);
- case TAB(DBCC,SZ_UNDEF): {
- if (fragP->fr_symbol != NULL && S_GET_SEGMENT(fragP->fr_symbol) == segment) {
- fragP->fr_subtype=TAB(DBCC,SHORT);
- fragP->fr_var+=2;
- break;
- }
- /* only DBcc 68000 instructions can come here */
- /* change dbcc into dbcc/jmp absl long */
- /* JF: these used to be fr_opcode[2-4], which is wrong. */
- buffer_address[0] = 0x00; /* branch offset = 4 */
- buffer_address[1] = 0x04;
- buffer_address[2] = 0x60; /* put in bra pc + ... */
-
- if(flagseen['l']) {
- /* JF: these were fr_opcode[5-7] */
- buffer_address[3] = 0x04; /* plus 4 */
- buffer_address[4] = 0x4e;/* Put in Jump Word */
- buffer_address[5] = 0xf8;
- fragP->fr_fix += 6; /* account for bra/jmp instruction */
- subseg_change(SEG_TEXT,0);
- fix_new(fragP, fragP->fr_fix, 2, fragP->fr_symbol, 0,
- fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix += 2;
- } else {
- /* JF: these were fr_opcode[5-7] */
- buffer_address[3] = 0x06; /* Plus 6 */
- buffer_address[4] = 0x4e; /* put in jmp long (0x4ef9) */
- buffer_address[5] = 0xf9;
- fragP->fr_fix += 6; /* account for bra/jmp instruction */
- subseg_change(SEG_TEXT,0);
- fix_new(fragP, fragP->fr_fix, 4, fragP->fr_symbol, 0,
- fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix += 4;
- }
+ free (mri_control_stack->incr);
- frag_wane(fragP);
- break;
- } /* case TAB(DBCC,SZ_UNDEF) */
-
- case TAB(BRANCH,SZ_UNDEF): {
- if((fragP->fr_symbol != NULL) /* Not absolute */
- && S_GET_SEGMENT(fragP->fr_symbol) == segment) {
- fragP->fr_subtype=TAB(TABTYPE(fragP->fr_subtype),BYTE);
- break;
- } else if((fragP->fr_symbol == 0) || (cpu_of_arch(current_architecture) < m68020)) {
- /* On 68000, or for absolute value, switch to abs long */
- /* FIXME, we should check abs val, pick short or long */
- if(fragP->fr_opcode[0]==0x61) {
- fragP->fr_opcode[0]= 0x4E;
- fragP->fr_opcode[1]= 0xB9; /* JBSR with ABSL LONG offset */
- subseg_change(SEG_TEXT, 0);
- fix_new(fragP, fragP->fr_fix, 4,
- fragP->fr_symbol, 0, fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix+=4;
- frag_wane(fragP);
- } else if(fragP->fr_opcode[0]==0x60) {
- fragP->fr_opcode[0]= 0x4E;
- fragP->fr_opcode[1]= 0xF9; /* JMP with ABSL LONG offset */
- subseg_change(SEG_TEXT, 0);
- fix_new(fragP, fragP->fr_fix, 4,
- fragP->fr_symbol, 0, fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix+=4;
- frag_wane(fragP);
- } else {
- as_warn("Long branch offset to extern symbol not supported.");
- }
- } else { /* Symbol is still undefined. Make it simple */
- fix_new(fragP, (int)(fragP->fr_fix), 4, fragP->fr_symbol,
- (symbolS *)0, fragP->fr_offset+4, 1, NO_RELOC);
- fragP->fr_fix+=4;
- fragP->fr_opcode[1]=0xff;
- frag_wane(fragP);
- break;
- }
+ colon (mri_control_stack->bottom);
- break;
- } /* case TAB(BRANCH,SZ_UNDEF) */
-
- case TAB(PCLEA,SZ_UNDEF): {
- if ((S_GET_SEGMENT(fragP->fr_symbol))==segment || flagseen['l']) {
- fragP->fr_subtype=TAB(PCLEA,SHORT);
- fragP->fr_var+=2;
- } else {
- fragP->fr_subtype=TAB(PCLEA,LONG);
- fragP->fr_var+=6;
- }
- break;
- } /* TAB(PCLEA,SZ_UNDEF) */
-
- case TAB(PCREL,SZ_UNDEF): {
- if(S_GET_SEGMENT(fragP->fr_symbol) == segment || flagseen['l']) {
- fragP->fr_subtype = TAB(PCREL,SHORT);
- fragP->fr_var += 2;
- } else {
- fragP->fr_subtype = TAB(PCREL,LONG);
- fragP->fr_var += 4;
- }
- break;
- } /* TAB(PCREL,SZ_UNDEF) */
+ pop_mri_control ();
- default:
- break;
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
- } /* switch on subtype looking for SZ_UNDEF's. */
-
- /* now that SZ_UNDEF are taken care of, check others */
- switch(fragP->fr_subtype) {
- case TAB(BCC68000,BYTE):
- case TAB(BRANCH,BYTE):
- /* We can't do a short jump to the next instruction,
- so we force word mode. */
- if (fragP->fr_symbol && S_GET_VALUE(fragP->fr_symbol)==0 &&
- fragP->fr_symbol->sy_frag==fragP->fr_next) {
- fragP->fr_subtype=TAB(TABTYPE(fragP->fr_subtype),SHORT);
- fragP->fr_var+=2;
- }
- break;
- default:
- break;
- }
- return fragP->fr_var + fragP->fr_fix - old_fix;
+ demand_empty_rest_of_line ();
}
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
-/* the bit-field entries in the relocation_info struct plays hell
- with the byte-order problems of cross-assembly. So as a hack,
- I added this mach. dependent ri twiddler. Ugly, but it gets
- you there. -KWK */
-/* on m68k: first 4 bytes are normal unsigned long, next three bytes
-are symbolnum, most sig. byte first. Last byte is broken up with
-bit 7 as pcrel, bits 6 & 5 as length, bit 4 as pcrel, and the lower
-nibble as nuthin. (on Sun 3 at least) */
-/* Translate the internal relocation information into target-specific
- format. */
-#ifdef comment
-void
-md_ri_to_chars(the_bytes, ri)
- char *the_bytes;
- struct reloc_info_generic *ri;
+/* Handle the MRI REPEAT pseudo-op. */
+
+static void
+s_mri_repeat (ignore)
+ int ignore ATTRIBUTE_UNUSED;
{
- /* this is easy */
- md_number_to_chars(the_bytes, ri->r_address, 4);
- /* now the fun stuff */
- the_bytes[4] = (ri->r_symbolnum >> 16) & 0x0ff;
- the_bytes[5] = (ri->r_symbolnum >> 8) & 0x0ff;
- the_bytes[6] = ri->r_symbolnum & 0x0ff;
- the_bytes[7] = (((ri->r_pcrel << 7) & 0x80) | ((ri->r_length << 5) & 0x60) |
- ((ri->r_extern << 4) & 0x10));
+ struct mri_control_info *n;
+
+ n = push_mri_control (mri_repeat);
+ colon (n->top);
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+ demand_empty_rest_of_line ();
}
-#endif /* comment */
-void tc_aout_fix_to_chars(where, fixP, segment_address_in_file)
-char *where;
-fixS *fixP;
-relax_addressT segment_address_in_file;
-{
- /*
- * In: length of relocation (or of address) in chars: 1, 2 or 4.
- * Out: GNU LD relocation length code: 0, 1, or 2.
- */
-
- static unsigned char nbytes_r_length [] = { 42, 0, 1, 42, 2 };
-
- long r_extern;
- long r_symbolnum;
-
- /* this is easy */
- md_number_to_chars(where,
- fixP->fx_frag->fr_address + fixP->fx_where - segment_address_in_file,
- 4);
-
- /* now the fun stuff */
- if (S_GET_TYPE(fixP->fx_addsy) == N_UNDF) {
- r_extern = 1;
- r_symbolnum = fixP->fx_addsy->sy_number;
- } else {
- r_extern = 0;
- r_symbolnum = S_GET_TYPE(fixP->fx_addsy);
- }
-
- where[4] = (r_symbolnum >> 16) & 0x0ff;
- where[5] = (r_symbolnum >> 8) & 0x0ff;
- where[6] = r_symbolnum & 0x0ff;
- where[7] = (((fixP->fx_pcrel << 7) & 0x80) | ((nbytes_r_length[fixP->fx_size] << 5) & 0x60) |
- ((r_extern << 4) & 0x10));
-
- return;
-} /* tc_aout_fix_to_chars() */
+/* Handle the MRI UNTIL pseudo-op. */
-#endif /* OBJ_AOUT or OBJ_BOUT */
+static void
+s_mri_until (qual)
+ int qual;
+{
+ char *s;
+
+ if (mri_control_stack == NULL
+ || mri_control_stack->type != mri_repeat)
+ {
+ as_bad (_("until without repeat"));
+ ignore_rest_of_line ();
+ return;
+ }
-#ifndef WORKING_DOT_WORD
-const int md_short_jump_size = 4;
-const int md_long_jump_size = 6;
+ colon (mri_control_stack->next);
-void
-md_create_short_jump(ptr,from_addr,to_addr,frag,to_symbol)
-char *ptr;
-long from_addr,
- to_addr;
-fragS *frag;
-symbolS *to_symbol;
-{
- long offset;
+ for (s = input_line_pointer; ! is_end_of_line[(unsigned char) *s]; s++)
+ ;
- offset = to_addr - (from_addr+2);
+ parse_mri_control_expression (s, qual, (const char *) NULL,
+ mri_control_stack->top, '\0');
- md_number_to_chars(ptr ,(long)0x6000,2);
- md_number_to_chars(ptr+2,(long)offset,2);
-}
+ colon (mri_control_stack->bottom);
-void
-md_create_long_jump(ptr,from_addr,to_addr,frag,to_symbol)
-char *ptr;
-long from_addr,
- to_addr;
-fragS *frag;
-symbolS *to_symbol;
-{
- long offset;
-
- if (cpu_of_arch(current_architecture) < m68020) {
- offset=to_addr-S_GET_VALUE(to_symbol);
- md_number_to_chars(ptr ,(long)0x4EF9,2);
- md_number_to_chars(ptr+2,(long)offset,4);
- fix_new(frag,(ptr+2)-frag->fr_literal,4,to_symbol,(symbolS *)0,(long)0,0,
- NO_RELOC);
- } else {
- offset=to_addr - (from_addr+2);
- md_number_to_chars(ptr ,(long)0x60ff,2);
- md_number_to_chars(ptr+2,(long)offset,4);
- }
-}
+ input_line_pointer = s;
-#endif
-/* Different values of OK tell what its OK to return. Things that aren't OK are an error (what a shock, no?)
+ pop_mri_control ();
- 0: Everything is OK
- 10: Absolute 1:8 only
- 20: Absolute 0:7 only
- 30: absolute 0:15 only
- 40: Absolute 0:31 only
- 50: absolute 0:127 only
- 55: absolute -64:63 only
- 60: absolute -128:127 only
- 70: absolute 0:4095 only
- 80: No bignums
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
+ demand_empty_rest_of_line ();
+}
-*/
+/* Handle the MRI WHILE pseudo-op. */
-static int get_num(exp,ok)
-struct m68k_exp *exp;
-int ok;
+static void
+s_mri_while (qual)
+ int qual;
{
-#ifdef TEST2
- long l = 0;
+ char *s;
+
+ struct mri_control_info *n;
+
+ s = input_line_pointer;
+ /* We only accept '*' as introduction of comments if preceded by white space
+ or at first column of a line (I think this can't actually happen here?)
+ This is important when assembling:
+ while d0 <ne> 12(a0,d0*2) do
+ while d0 <ne> #CONST*20 do */
+ while ( ! ( is_end_of_line[(unsigned char) *s]
+ || ( flag_mri
+ && *s == '*'
+ && ( s == input_line_pointer
+ || *(s-1) == ' '
+ || *(s-1) == '\t'))))
+ s++;
+ --s;
+ while (*s == ' ' || *s == '\t')
+ --s;
+ if (s - input_line_pointer > 1
+ && s[-1] == '.')
+ s -= 2;
+ if (s - input_line_pointer < 2
+ || strncasecmp (s - 1, "DO", 2) != 0)
+ {
+ as_bad (_("missing do"));
+ ignore_rest_of_line ();
+ return;
+ }
- if(!exp->e_beg)
- return 0;
- if(*exp->e_beg=='0') {
- if(exp->e_beg[1]=='x')
- sscanf(exp->e_beg+2,"%x",&l);
- else
- sscanf(exp->e_beg+1,"%O",&l);
- return l;
- }
- return atol(exp->e_beg);
-#else
- char *save_in;
- char c_save;
+ n = push_mri_control (mri_while);
- if(!exp) {
- /* Can't do anything */
- return 0;
- }
- if(!exp->e_beg || !exp->e_end) {
- seg(exp)=SEG_ABSOLUTE;
- adds(exp)=0;
- subs(exp)=0;
- offs(exp)= (ok==10) ? 1 : 0;
- as_warn("Null expression defaults to %ld",offs(exp));
- return 0;
- }
+ colon (n->next);
- exp->e_siz=0;
- if(/* ok!=80 && */exp->e_end[-1]==':' && (exp->e_end-exp->e_beg)>=2) {
- switch(exp->e_end[0]) {
- case 's':
- case 'S':
- case 'b':
- case 'B':
- exp->e_siz=1;
- break;
- case 'w':
- case 'W':
- exp->e_siz=2;
- break;
- case 'l':
- case 'L':
- exp->e_siz=3;
- break;
- default:
- as_bad("Unknown size for expression \"%c\"",exp->e_end[0]);
- }
- exp->e_end-=2;
- }
- c_save=exp->e_end[1];
- exp->e_end[1]='\0';
- save_in=input_line_pointer;
- input_line_pointer=exp->e_beg;
- switch(expression(&(exp->e_exp))) {
- case SEG_PASS1:
- seg(exp)=SEG_ABSOLUTE;
- adds(exp)=0;
- subs(exp)=0;
- offs(exp)= (ok==10) ? 1 : 0;
- as_warn("Unknown expression: '%s' defaulting to %d",exp->e_beg,offs(exp));
- break;
+ parse_mri_control_expression (s - 1, qual, (const char *) NULL, n->bottom,
+ s[1] == '.' ? s[2] : '\0');
- case SEG_ABSENT:
- /* Do the same thing the VAX asm does */
- seg(exp)=SEG_ABSOLUTE;
- adds(exp)=0;
- subs(exp)=0;
- offs(exp)=0;
- if(ok==10) {
- as_warn("expression out of range: defaulting to 1");
- offs(exp)=1;
- }
- break;
- case SEG_ABSOLUTE:
- switch(ok) {
- case 10:
- if(offs(exp)<1 || offs(exp)>8) {
- as_warn("expression out of range: defaulting to 1");
- offs(exp)=1;
- }
- break;
- case 20:
- if(offs(exp)<0 || offs(exp)>7)
- goto outrange;
- break;
- case 30:
- if(offs(exp)<0 || offs(exp)>15)
- goto outrange;
- break;
- case 40:
- if(offs(exp)<0 || offs(exp)>32)
- goto outrange;
- break;
- case 50:
- if(offs(exp)<0 || offs(exp)>127)
- goto outrange;
- break;
- case 55:
- if(offs(exp)<-64 || offs(exp)>63)
- goto outrange;
- break;
- case 60:
- if(offs(exp)<-128 || offs(exp)>127)
- goto outrange;
- break;
- case 70:
- if(offs(exp)<0 || offs(exp)>4095) {
- outrange:
- as_warn("expression out of range: defaulting to 0");
- offs(exp)=0;
- }
- break;
- default:
- break;
- }
- break;
- case SEG_TEXT:
- case SEG_DATA:
- case SEG_BSS:
- case SEG_UNKNOWN:
- case SEG_DIFFERENCE:
- if(ok>=10 && ok<=70) {
- seg(exp)=SEG_ABSOLUTE;
- adds(exp)=0;
- subs(exp)=0;
- offs(exp)= (ok==10) ? 1 : 0;
- as_warn("Can't deal with expression \"%s\": defaulting to %ld",exp->e_beg,offs(exp));
- }
- break;
- case SEG_BIG:
- if(ok==80 && offs(exp)<0) { /* HACK! Turn it into a long */
- LITTLENUM_TYPE words[6];
-
- gen_to_words(words,2,8L);/* These numbers are magic! */
- seg(exp)=SEG_ABSOLUTE;
- adds(exp)=0;
- subs(exp)=0;
- offs(exp)=words[1]|(words[0]<<16);
- } else if(ok!=0) {
- seg(exp)=SEG_ABSOLUTE;
- adds(exp)=0;
- subs(exp)=0;
- offs(exp)= (ok==10) ? 1 : 0;
- as_warn("Can't deal with expression \"%s\": defaulting to %ld",exp->e_beg,offs(exp));
- }
- break;
- default:
- as_fatal("failed sanity check.");
- }
- if(input_line_pointer!=exp->e_end+1)
- as_bad("Ignoring junk after expression");
- exp->e_end[1]=c_save;
- input_line_pointer=save_in;
- if(exp->e_siz) {
- switch(exp->e_siz) {
- case 1:
- if(!isbyte(offs(exp)))
- as_warn("expression doesn't fit in BYTE");
- break;
- case 2:
- if(!isword(offs(exp)))
- as_warn("expression doesn't fit in WORD");
- break;
- }
- }
- return offs(exp);
-#endif
-} /* get_num() */
+ input_line_pointer = s + 1;
+ if (*input_line_pointer == '.')
+ input_line_pointer += 2;
-/* These are the back-ends for the various machine dependent pseudo-ops. */
-void demand_empty_rest_of_line(); /* Hate those extra verbose names */
-
-static void s_data1() {
- subseg_new(SEG_DATA,1);
- demand_empty_rest_of_line();
-} /* s_data1() */
-
-static void s_data2() {
- subseg_new(SEG_DATA,2);
- demand_empty_rest_of_line();
-} /* s_data2() */
-
-static void s_bss() {
- /* We don't support putting frags in the BSS segment, but we
- can put them into initialized data for now... */
- subseg_new(SEG_DATA,255); /* FIXME-SOON */
- demand_empty_rest_of_line();
-} /* s_bss() */
-
-static void s_even() {
- register int temp;
- register long temp_fill;
-
- temp = 1; /* JF should be 2? */
- temp_fill = get_absolute_expression ();
- if ( ! need_pass_2 ) /* Never make frag if expect extra pass. */
- frag_align (temp, (int)temp_fill);
- demand_empty_rest_of_line();
-} /* s_even() */
-
-static void s_proc() {
- demand_empty_rest_of_line();
-} /* s_proc() */
-
-/* s_space is defined in read.c .skip is simply an alias to it. */
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
+ demand_empty_rest_of_line ();
+}
+
+/* Handle the MRI ENDW pseudo-op. */
+
+static void
+s_mri_endw (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ char *buf;
+
+ if (mri_control_stack == NULL
+ || mri_control_stack->type != mri_while)
+ {
+ as_bad (_("endw without while"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ buf = (char *) xmalloc (20 + strlen (mri_control_stack->next));
+ sprintf (buf, "bra %s", mri_control_stack->next);
+ mri_assemble (buf);
+ free (buf);
+
+ colon (mri_control_stack->bottom);
+
+ pop_mri_control ();
+ if (flag_mri)
+ {
+ while (! is_end_of_line[(unsigned char) *input_line_pointer])
+ ++input_line_pointer;
+ }
+
+ demand_empty_rest_of_line ();
+}
+\f
/*
* md_parse_option
* Invocation line includes a switch not recognized by the base assembler.
* errors. More than one may be specified. The default is
* -m68020 -m68851 -m68881. Note that -m68008 is a synonym
* for -m68000, and -m68882 is a synonym for -m68881.
+ * -[A]m[c]no-68851, -[A]m[c]no-68881
+ * Don't accept 688?1 instructions. (The "c" is kind of silly,
+ * so don't use or document it, but that's the way the parsing
+ * works).
+ *
+ * -pic Indicates PIC.
+ * -k Indicates PIC. (Sun 3 only.)
+ * --pcrel Never turn PC-relative branches into absolute jumps.
+ *
+ * --bitwise-or
+ * Permit `|' to be used in expressions.
*
*/
-int md_parse_option(argP,cntP,vecP)
-char **argP;
-int *cntP;
-char ***vecP;
-{
- switch(**argP) {
- case 'l': /* -l means keep external to 2 bit offset
- rather than 16 bit one */
- break;
-
- case 'S': /* -S means that jbsr's always turn into jsr's. */
- break;
-
- case 'A':
- (*argP)++;
- /* intentional fall-through */
- case 'm':
- (*argP)++;
-
- if (**argP=='c') {
- (*argP)++;
- } /* allow an optional "c" */
-
- if (!strcmp(*argP, "68000")
- || !strcmp(*argP, "68008")) {
- current_architecture |= m68000;
- } else if (!strcmp(*argP, "68010")) {
-#ifdef TE_SUN
- omagic= 1<<16|OMAGIC;
+#ifdef OBJ_ELF
+CONST char *md_shortopts = "lSA:m:kQ:V";
+#else
+CONST char *md_shortopts = "lSA:m:k";
#endif
- current_architecture |= m68010;
- } else if (!strcmp(*argP, "68020")) {
- current_architecture |= m68020;
-
- } else if (!strcmp(*argP, "68030")) {
- current_architecture |= m68030;
+struct option md_longopts[] = {
+#define OPTION_PIC (OPTION_MD_BASE)
+ {"pic", no_argument, NULL, OPTION_PIC},
+#define OPTION_REGISTER_PREFIX_OPTIONAL (OPTION_MD_BASE + 1)
+ {"register-prefix-optional", no_argument, NULL,
+ OPTION_REGISTER_PREFIX_OPTIONAL},
+#define OPTION_BITWISE_OR (OPTION_MD_BASE + 2)
+ {"bitwise-or", no_argument, NULL, OPTION_BITWISE_OR},
+#define OPTION_BASE_SIZE_DEFAULT_16 (OPTION_MD_BASE + 3)
+ {"base-size-default-16", no_argument, NULL, OPTION_BASE_SIZE_DEFAULT_16},
+#define OPTION_BASE_SIZE_DEFAULT_32 (OPTION_MD_BASE + 4)
+ {"base-size-default-32", no_argument, NULL, OPTION_BASE_SIZE_DEFAULT_32},
+#define OPTION_DISP_SIZE_DEFAULT_16 (OPTION_MD_BASE + 5)
+ {"disp-size-default-16", no_argument, NULL, OPTION_DISP_SIZE_DEFAULT_16},
+#define OPTION_DISP_SIZE_DEFAULT_32 (OPTION_MD_BASE + 6)
+ {"disp-size-default-32", no_argument, NULL, OPTION_DISP_SIZE_DEFAULT_32},
+#define OPTION_PCREL (OPTION_MD_BASE + 7)
+ {"pcrel", no_argument, NULL, OPTION_PCREL},
+ {NULL, no_argument, NULL, 0}
+};
+size_t md_longopts_size = sizeof (md_longopts);
- } else if (!strcmp(*argP, "68040")) {
- current_architecture |= m68040;
+int
+md_parse_option (c, arg)
+ int c;
+ char *arg;
+{
+ switch (c)
+ {
+ case 'l': /* -l means keep external to 2 bit offset
+ rather than 16 bit one */
+ flag_short_refs = 1;
+ break;
+
+ case 'S': /* -S means that jbsr's always turn into
+ jsr's. */
+ flag_long_jumps = 1;
+ break;
+
+ case OPTION_PCREL: /* --pcrel means never turn PC-relative
+ branches into absolute jumps. */
+ flag_keep_pcrel = 1;
+ break;
+
+ case 'A':
+ if (*arg == 'm')
+ arg++;
+ /* intentional fall-through */
+ case 'm':
+
+ if (arg[0] == 'n' && arg[1] == 'o' && arg[2] == '-')
+ {
+ int i;
+ unsigned long arch;
+ const char *oarg = arg;
+
+ arg += 3;
+ if (*arg == 'm')
+ {
+ arg++;
+ if (arg[0] == 'c' && arg[1] == '6')
+ arg++;
+ }
+ for (i = 0; i < n_archs; i++)
+ if (!strcmp (arg, archs[i].name))
+ break;
+ if (i == n_archs)
+ {
+ unknown:
+ as_bad (_("unrecognized option `%s'"), oarg);
+ return 0;
+ }
+ arch = archs[i].arch;
+ if (arch == m68881)
+ no_68881 = 1;
+ else if (arch == m68851)
+ no_68851 = 1;
+ else
+ goto unknown;
+ }
+ else
+ {
+ int i;
-#ifndef NO_68881
- } else if (!strcmp(*argP, "68881")) {
- current_architecture |= m68881;
+ if (arg[0] == 'c' && arg[1] == '6')
+ arg++;
- } else if (!strcmp(*argP, "68882")) {
- current_architecture |= m68882;
+ for (i = 0; i < n_archs; i++)
+ if (!strcmp (arg, archs[i].name))
+ {
+ unsigned long arch = archs[i].arch;
+ if (cpu_of_arch (arch))
+ /* It's a cpu spec. */
+ {
+ current_architecture &= ~m68000up;
+ current_architecture |= arch;
+ }
+ else if (arch == m68881)
+ {
+ current_architecture |= m68881;
+ no_68881 = 0;
+ }
+ else if (arch == m68851)
+ {
+ current_architecture |= m68851;
+ no_68851 = 0;
+ }
+ else
+ /* ??? */
+ abort ();
+ break;
+ }
+ if (i == n_archs)
+ {
+ as_bad (_("unrecognized architecture specification `%s'"), arg);
+ return 0;
+ }
+ }
+ break;
+
+ case OPTION_PIC:
+ case 'k':
+ flag_want_pic = 1;
+ break; /* -pic, Position Independent Code */
+
+ case OPTION_REGISTER_PREFIX_OPTIONAL:
+ flag_reg_prefix_optional = 1;
+ reg_prefix_optional_seen = 1;
+ break;
+
+ /* -V: SVR4 argument to print version ID. */
+ case 'V':
+ print_version_id ();
+ break;
+
+ /* -Qy, -Qn: SVR4 arguments controlling whether a .comment section
+ should be emitted or not. FIXME: Not implemented. */
+ case 'Q':
+ break;
+
+ case OPTION_BITWISE_OR:
+ {
+ char *n, *t;
+ const char *s;
+
+ n = (char *) xmalloc (strlen (m68k_comment_chars) + 1);
+ t = n;
+ for (s = m68k_comment_chars; *s != '\0'; s++)
+ if (*s != '|')
+ *t++ = *s;
+ *t = '\0';
+ m68k_comment_chars = n;
+ }
+ break;
-#endif /* NO_68881 */
-#ifndef NO_68851
- } else if (!strcmp(*argP,"68851")) {
- current_architecture |= m68851;
+ case OPTION_BASE_SIZE_DEFAULT_16:
+ m68k_index_width_default = SIZE_WORD;
+ break;
-#endif /* NO_68851 */
- } else {
- as_warn("Unknown architecture, \"%s\". option ignored", *argP);
- } /* switch on architecture */
+ case OPTION_BASE_SIZE_DEFAULT_32:
+ m68k_index_width_default = SIZE_LONG;
+ break;
- while(**argP) (*argP)++;
+ case OPTION_DISP_SIZE_DEFAULT_16:
+ m68k_rel32 = 0;
+ m68k_rel32_from_cmdline = 1;
+ break;
- break;
+ case OPTION_DISP_SIZE_DEFAULT_32:
+ m68k_rel32 = 1;
+ m68k_rel32_from_cmdline = 1;
+ break;
- case 'p':
- if (!strcmp(*argP,"pic")) {
- (*argP) += 3;
- break; /* -pic, Position Independent Code */
- } else {
- return(0);
- } /* pic or not */
+ default:
+ return 0;
+ }
- default:
- return 0;
- }
- return 1;
+ return 1;
}
-
+void
+md_show_usage (stream)
+ FILE *stream;
+{
+ fprintf (stream, _("\
+680X0 options:\n\
+-l use 1 word for refs to undefined symbols [default 2]\n\
+-m68000 | -m68008 | -m68010 | -m68020 | -m68030 | -m68040 | -m68060 |\n\
+-m68302 | -m68331 | -m68332 | -m68333 | -m68340 | -m68360 | -mcpu32 |\n\
+-m5200 | -m5202 | -m5204 | -m5206 | -m5206e | -m5307 | -m5407\n\
+ specify variant of 680X0 architecture [default 68020]\n\
+-m68881 | -m68882 | -mno-68881 | -mno-68882\n\
+ target has/lacks floating-point coprocessor\n\
+ [default yes for 68020, 68030, and cpu32]\n"));
+ fprintf (stream, _("\
+-m68851 | -mno-68851\n\
+ target has/lacks memory-management unit coprocessor\n\
+ [default yes for 68020 and up]\n\
+-pic, -k generate position independent code\n\
+-S turn jbsr into jsr\n\
+--pcrel never turn PC-relative branches into absolute jumps\n\
+--register-prefix-optional\n\
+ recognize register names without prefix character\n\
+--bitwise-or do not treat `|' as a comment character\n"));
+ fprintf (stream, _("\
+--base-size-default-16 base reg without size is 16 bits\n\
+--base-size-default-32 base reg without size is 32 bits (default)\n\
+--disp-size-default-16 displacement with unknown size is 16 bits\n\
+--disp-size-default-32 displacement with unknown size is 32 bits (default)\n"));
+}
+\f
#ifdef TEST2
/* TEST2: Test md_assemble() */
/* Warning, this routine probably doesn't work anymore */
-main()
-{
- struct m68k_it the_ins;
- char buf[120];
- char *cp;
- int n;
-
- m68k_ip_begin();
- for(;;) {
- if(!gets(buf) || !*buf)
- break;
- if(buf[0]=='|' || buf[1]=='.')
- continue;
- for(cp=buf;*cp;cp++)
- if(*cp=='\t')
- *cp=' ';
- if(is_label(buf))
- continue;
- bzero(&the_ins,sizeof(the_ins));
- m68k_ip(&the_ins,buf);
- if(the_ins.error) {
- printf("Error %s in %s\n",the_ins.error,buf);
- } else {
- printf("Opcode(%d.%s): ",the_ins.numo,the_ins.args);
- for(n=0;n<the_ins.numo;n++)
- printf(" 0x%x",the_ins.opcode[n]&0xffff);
- printf(" ");
- print_the_insn(&the_ins.opcode[0],stdout);
- (void)putchar('\n');
- }
- for(n=0;n<strlen(the_ins.args)/2;n++) {
- if(the_ins.operands[n].error) {
- printf("op%d Error %s in %s\n",n,the_ins.operands[n].error,buf);
- continue;
- }
- printf("mode %d, reg %d, ",the_ins.operands[n].mode,the_ins.operands[n].reg);
- if(the_ins.operands[n].b_const)
- printf("Constant: '%.*s', ",1+the_ins.operands[n].e_const-the_ins.operands[n].b_const,the_ins.operands[n].b_const);
- printf("ireg %d, isiz %d, imul %d, ",the_ins.operands[n].ireg,the_ins.operands[n].isiz,the_ins.operands[n].imul);
- if(the_ins.operands[n].b_iadd)
- printf("Iadd: '%.*s',",1+the_ins.operands[n].e_iadd-the_ins.operands[n].b_iadd,the_ins.operands[n].b_iadd);
- (void)putchar('\n');
- }
+main ()
+{
+ struct m68k_it the_ins;
+ char buf[120];
+ char *cp;
+ int n;
+
+ m68k_ip_begin ();
+ for (;;)
+ {
+ if (!gets (buf) || !*buf)
+ break;
+ if (buf[0] == '|' || buf[1] == '.')
+ continue;
+ for (cp = buf; *cp; cp++)
+ if (*cp == '\t')
+ *cp = ' ';
+ if (is_label (buf))
+ continue;
+ memset (&the_ins, '\0', sizeof (the_ins));
+ m68k_ip (&the_ins, buf);
+ if (the_ins.error)
+ {
+ printf (_("Error %s in %s\n"), the_ins.error, buf);
+ }
+ else
+ {
+ printf (_("Opcode(%d.%s): "), the_ins.numo, the_ins.args);
+ for (n = 0; n < the_ins.numo; n++)
+ printf (" 0x%x", the_ins.opcode[n] & 0xffff);
+ printf (" ");
+ print_the_insn (&the_ins.opcode[0], stdout);
+ (void) putchar ('\n');
}
- m68k_ip_end();
- return 0;
+ for (n = 0; n < strlen (the_ins.args) / 2; n++)
+ {
+ if (the_ins.operands[n].error)
+ {
+ printf ("op%d Error %s in %s\n", n, the_ins.operands[n].error, buf);
+ continue;
+ }
+ printf ("mode %d, reg %d, ", the_ins.operands[n].mode, the_ins.operands[n].reg);
+ if (the_ins.operands[n].b_const)
+ printf ("Constant: '%.*s', ", 1 + the_ins.operands[n].e_const - the_ins.operands[n].b_const, the_ins.operands[n].b_const);
+ printf ("ireg %d, isiz %d, imul %d, ", the_ins.operands[n].ireg, the_ins.operands[n].isiz, the_ins.operands[n].imul);
+ if (the_ins.operands[n].b_iadd)
+ printf ("Iadd: '%.*s',", 1 + the_ins.operands[n].e_iadd - the_ins.operands[n].b_iadd, the_ins.operands[n].b_iadd);
+ (void) putchar ('\n');
+ }
+ }
+ m68k_ip_end ();
+ return 0;
}
-is_label(str)
-char *str;
+is_label (str)
+ char *str;
{
- while(*str==' ')
- str++;
- while(*str && *str!=' ')
- str++;
- if(str[-1]==':' || str[1]=='=')
- return 1;
- return 0;
+ while (*str == ' ')
+ str++;
+ while (*str && *str != ' ')
+ str++;
+ if (str[-1] == ':' || str[1] == '=')
+ return 1;
+ return 0;
}
#endif
/* Possible states for relaxation:
-0 0 branch offset byte (bra, etc)
-0 1 word
-0 2 long
-
-1 0 indexed offsets byte a0@(32,d4:w:1) etc
-1 1 word
-1 2 long
-
-2 0 two-offset index word-word a0@(32,d4)@(45) etc
-2 1 word-long
-2 2 long-word
-2 3 long-long
+ 0 0 branch offset byte (bra, etc)
+ 0 1 word
+ 0 2 long
-*/
+ 1 0 indexed offsets byte a0@(32,d4:w:1) etc
+ 1 1 word
+ 1 2 long
+ 2 0 two-offset index word-word a0@(32,d4)@(45) etc
+ 2 1 word-long
+ 2 2 long-word
+ 2 3 long-long
+ */
-#ifdef DONTDEF
-abort()
-{
- printf("ABORT!\n");
- exit(12);
-}
-
-char *index(s,c)
-char *s;
-{
- while(*s!=c) {
- if(!*s) return 0;
- s++;
- }
- return s;
-}
+/* We have no need to default values of symbols. */
-bzero(s,n)
-char *s;
+symbolS *
+md_undefined_symbol (name)
+ char *name ATTRIBUTE_UNUSED;
{
- while(n--)
- *s++=0;
+ return 0;
}
-print_frags()
+/* Round up a section size to the appropriate boundary. */
+valueT
+md_section_align (segment, size)
+ segT segment ATTRIBUTE_UNUSED;
+ valueT size;
{
- fragS *fragP;
- extern fragS *text_frag_root;
-
- for(fragP=text_frag_root;fragP;fragP=fragP->fr_next) {
- printf("addr %lu next 0x%x fix %ld var %ld symbol 0x%x offset %ld\n",
- fragP->fr_address,fragP->fr_next,fragP->fr_fix,fragP->fr_var,fragP->fr_symbol,fragP->fr_offset);
- printf("opcode 0x%x type %d subtype %d\n\n",fragP->fr_opcode,fragP->fr_type,fragP->fr_subtype);
- }
- fflush(stdout);
- return 0;
-}
+#ifdef OBJ_AOUT
+#ifdef BFD_ASSEMBLER
+ /* For a.out, force the section size to be aligned. If we don't do
+ this, BFD will align it for us, but it will not write out the
+ final bytes of the section. This may be a bug in BFD, but it is
+ easier to fix it here since that is how the other a.out targets
+ work. */
+ int align;
+
+ align = bfd_get_section_alignment (stdoutput, segment);
+ size = ((size + (1 << align) - 1) & ((valueT) -1 << align));
#endif
-
-#ifdef DONTDEF
-/*VARARGS1*/
-panic(format,args)
-char *format;
-{
- fputs("Internal error:",stderr);
- _doprnt(format,&args,stderr);
- (void)putc('\n',stderr);
- as_where();
- abort();
-}
#endif
-/* We have no need to default values of symbols. */
+ return size;
+}
-/* ARGSUSED */
-symbolS *
-md_undefined_symbol (name)
- char *name;
+/* Exactly what point is a PC-relative offset relative TO?
+ On the 68k, it is relative to the address of the first extension
+ word. The difference between the addresses of the offset and the
+ first extension word is stored in fx_pcrel_adjust. */
+long
+md_pcrel_from (fixP)
+ fixS *fixP;
{
- return 0;
+ int adjust;
+
+ /* Because fx_pcrel_adjust is a char, and may be unsigned, we explicitly
+ sign extend the value here. */
+ adjust = ((fixP->fx_pcrel_adjust & 0xff) ^ 0x80) - 0x80;
+ if (adjust == 64)
+ adjust = -1;
+ return fixP->fx_where + fixP->fx_frag->fr_address - adjust;
}
-/* Parse an operand that is machine-specific.
- We just return without modifying the expression if we have nothing
- to do. */
+#ifndef BFD_ASSEMBLER
+#ifdef OBJ_COFF
-/* ARGSUSED */
void
-md_operand (expressionP)
- expressionS *expressionP;
+tc_coff_symbol_emit_hook (ignore)
+ symbolS *ignore ATTRIBUTE_UNUSED;
{
}
-/* Round up a section size to the appropriate boundary. */
-long
-md_section_align (segment, size)
- segT segment;
- long size;
+int
+tc_coff_sizemachdep (frag)
+ fragS *frag;
{
- return size; /* Byte alignment is fine */
+ switch (frag->fr_subtype & 0x3)
+ {
+ case BYTE:
+ return 1;
+ case SHORT:
+ return 2;
+ case LONG:
+ return 4;
+ default:
+ abort ();
+ return 0;
+ }
}
-/* Exactly what point is a PC-relative offset relative TO?
- On the 68k, they're relative to the address of the offset, plus
- its size. (??? Is this right? FIXME-SOON!) */
-long
-md_pcrel_from (fixP)
- fixS *fixP;
+#endif
+#endif
+#ifdef OBJ_ELF
+void m68k_elf_final_processing()
{
- return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
+ /* Set file-specific flags if this is a cpu32 processor */
+ if (cpu_of_arch (current_architecture) & cpu32)
+ elf_elfheader (stdoutput)->e_flags |= EF_CPU32;
}
-
-/*
- * Local Variables:
- * comment-column: 0
- * fill-column: 131
- * End:
- */
-
-/* end of tc-m68k.c */
+#endif
projects / deliverable / binutils-gdb.git / blobdiff