/* tc-m68k.c -- Assemble for the m68k family
- Copyright (C) 1987, 91, 92, 93, 94, 95, 96, 97, 98, 1999
+ Copyright 1987, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
Software Foundation, 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA. */
-#include <ctype.h>
#include "as.h"
+#include "safe-ctype.h"
#include "obstack.h"
#include "subsegs.h"
+#include "dwarf2dbg.h"
#include "opcode/m68k.h"
#include "m68k-parse.h"
.line and .file directives will appear in the pre-processed output */
/* Note that input_file.c hand checks for '#' at the beginning of the
first line of the input file. This is because the compiler outputs
- #NO_APP at the beginning of its output. */
-/* Also note that comments like this one will always work. */
+ #NO_APP at the beginning of its output. */
+/* Also note that comments like this one will always work. */
const char line_comment_chars[] = "#*";
-const char line_separator_chars[] = "";
+const char line_separator_chars[] = ";";
/* Chars that can be used to separate mant from exp in floating point nums */
-CONST char EXP_CHARS[] = "eE";
+const char EXP_CHARS[] = "eE";
/* Chars that mean this number is a floating point constant, as
in "0f12.456" or "0d1.2345e12". */
-CONST char FLT_CHARS[] = "rRsSfFdDxXeEpP";
+const char FLT_CHARS[] = "rRsSfFdDxXeEpP";
/* Also be aware that MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT may have to be
changed in read.c . Ideally it shouldn't have to know about it at all,
/* Are we trying to generate PIC code? If so, absolute references
ought to be made into linkage table references or pc-relative
- references. Not implemented. For ELF there are other means
+ references. Not implemented. For ELF there are other means
to denote pic relocations. */
int flag_want_pic;
static int flag_short_refs; /* -l option */
static int flag_long_jumps; /* -S option */
+static int flag_keep_pcrel; /* --pcrel option. */
#ifdef REGISTER_PREFIX_OPTIONAL
int flag_reg_prefix_optional = REGISTER_PREFIX_OPTIONAL;
/* See flames below */
static struct obstack robyn;
-#define TAB(x,y) (((x)<<2)+(y))
-#define TABTYPE(xy) ((xy) >> 2)
-#define BYTE 0
-#define SHORT 1
-#define LONG 2
-#define SZ_UNDEF 3
-#undef BRANCH
-/* Case `g' except when BCC68000 is applicable. */
-#define ABRANCH 1
-/* Coprocessor branches. */
-#define FBRANCH 2
-/* Mode 7.2 -- program counter indirect with (16-bit) displacement,
- supported on all cpus. Widens to 32-bit absolute. */
-#define PCREL 3
-/* For inserting an extra jmp instruction with long offset on 68000,
- for expanding conditional branches. (Not bsr or bra.) Since the
- 68000 doesn't support 32-bit displacements for conditional
- branches, we fake it by reversing the condition and branching
- around a jmp with an absolute long operand. */
-#define BCC68000 4
-/* For the DBcc "instructions". If the displacement requires 32 bits,
- the branch-around-a-jump game is played here too. */
-#define DBCC 5
-/* Not currently used? */
-#define PCLEA 6
-/* Mode AINDX (apc-relative) using PC, with variable target, might fit
- in 16 or 8 bits. */
-#define PCINDEX 7
-
struct m68k_incant
{
const char *m_operands;
0
};
static const enum m68k_register mcf_control_regs[] = {
- CACR, TC, ITT0, ITT1, DTT0, DTT1, VBR, ROMBAR,
+ CACR, TC, ITT0, ITT1, DTT0, DTT1, VBR, ROMBAR,
RAMBAR0, RAMBAR1, MBAR,
0
};
#define arch_coldfire_p(x) (((x) & mcf) != 0)
/* Macros for determining if cpu supports a specific addressing mode */
-#define HAVE_LONG_BRANCH(x) ((x) & (m68020|m68030|m68040|m68060|cpu32))
+#define HAVE_LONG_BRANCH(x) ((x) & (m68020|m68030|m68040|m68060|cpu32|mcf5407))
static struct m68k_it the_ins; /* the instruction being assembled */
const struct m68k_incant *opcode;
{
int z;
- for(z=the_ins.numo;z>opcode->m_codenum;--z)
- the_ins.opcode[z]=the_ins.opcode[z-1];
- for(z=0;z<the_ins.nrel;z++)
- the_ins.reloc[z].n+=2;
+ for (z = the_ins.numo; z > opcode->m_codenum; --z)
+ the_ins.opcode[z] = the_ins.opcode[z - 1];
+ for (z = 0; z < the_ins.nrel; z++)
+ the_ins.reloc[z].n += 2;
for (z = 0; z < the_ins.nfrag; z++)
the_ins.fragb[z].fragoff++;
- the_ins.opcode[opcode->m_codenum]=w;
+ the_ins.opcode[opcode->m_codenum] = w;
the_ins.numo++;
}
offsetT off;
int type;
{
- the_ins.fragb[the_ins.nfrag].fragoff=the_ins.numo;
- the_ins.fragb[the_ins.nfrag].fadd=add;
- the_ins.fragb[the_ins.nfrag].foff=off;
- the_ins.fragb[the_ins.nfrag++].fragty=type;
+ the_ins.fragb[the_ins.nfrag].fragoff = the_ins.numo;
+ the_ins.fragb[the_ins.nfrag].fadd = add;
+ the_ins.fragb[the_ins.nfrag].foff = off;
+ the_ins.fragb[the_ins.nfrag++].fragty = type;
}
#define isvar(ex) \
static void s_mri_until PARAMS ((int));
static void s_mri_while PARAMS ((int));
static void s_mri_endw PARAMS ((int));
-static void md_apply_fix_2 PARAMS ((fixS *, offsetT));
static void md_convert_frag_1 PARAMS ((fragS *));
static int current_architecture;
-struct m68k_cpu {
- unsigned long arch;
- const char *name;
- int alias;
-};
+struct m68k_cpu
+ {
+ unsigned long arch;
+ const char *name;
+ int alias;
+ };
-static const struct m68k_cpu archs[] = {
- { m68000, "68000", 0 },
- { m68010, "68010", 0 },
- { m68020, "68020", 0 },
- { m68030, "68030", 0 },
- { m68040, "68040", 0 },
- { m68060, "68060", 0 },
- { cpu32, "cpu32", 0 },
- { m68881, "68881", 0 },
- { m68851, "68851", 0 },
- { mcf5200, "5200", 0 },
- { mcf5206e, "5206e", 0 },
- { mcf5307, "5307", 0},
- /* Aliases (effectively, so far as gas is concerned) for the above
- cpus. */
- { m68020, "68k", 1 },
- { m68000, "68008", 1 },
- { m68000, "68302", 1 },
- { m68000, "68306", 1 },
- { m68000, "68307", 1 },
- { m68000, "68322", 1 },
- { m68000, "68356", 1 },
- { m68000, "68ec000", 1 },
- { m68000, "68hc000", 1 },
- { m68000, "68hc001", 1 },
- { m68020, "68ec020", 1 },
- { m68030, "68ec030", 1 },
- { m68040, "68ec040", 1 },
- { m68060, "68ec060", 1 },
- { cpu32, "68330", 1 },
- { cpu32, "68331", 1 },
- { cpu32, "68332", 1 },
- { cpu32, "68333", 1 },
- { cpu32, "68334", 1 },
- { cpu32, "68336", 1 },
- { cpu32, "68340", 1 },
- { cpu32, "68341", 1 },
- { cpu32, "68349", 1 },
- { cpu32, "68360", 1 },
- { m68881, "68882", 1 },
- { mcf5200, "5202", 1 },
- { mcf5200, "5204", 1 },
- { mcf5200, "5206", 1 },
-};
+static const struct m68k_cpu archs[] =
+ {
+ { m68000, "68000", 0 },
+ { m68010, "68010", 0 },
+ { m68020, "68020", 0 },
+ { m68030, "68030", 0 },
+ { m68040, "68040", 0 },
+ { m68060, "68060", 0 },
+ { cpu32, "cpu32", 0 },
+ { m68881, "68881", 0 },
+ { m68851, "68851", 0 },
+ { mcf5200, "5200", 0 },
+ { mcf5206e, "5206e", 0 },
+ { mcf5307, "5307", 0},
+ { mcf5407, "5407", 0},
+ /* Aliases (effectively, so far as gas is concerned) for the above
+ cpus. */
+ { m68020, "68k", 1 },
+ { m68000, "68008", 1 },
+ { m68000, "68302", 1 },
+ { m68000, "68306", 1 },
+ { m68000, "68307", 1 },
+ { m68000, "68322", 1 },
+ { m68000, "68356", 1 },
+ { m68000, "68ec000", 1 },
+ { m68000, "68hc000", 1 },
+ { m68000, "68hc001", 1 },
+ { m68020, "68ec020", 1 },
+ { m68030, "68ec030", 1 },
+ { m68040, "68ec040", 1 },
+ { m68060, "68ec060", 1 },
+ { cpu32, "68330", 1 },
+ { cpu32, "68331", 1 },
+ { cpu32, "68332", 1 },
+ { cpu32, "68333", 1 },
+ { cpu32, "68334", 1 },
+ { cpu32, "68336", 1 },
+ { cpu32, "68340", 1 },
+ { cpu32, "68341", 1 },
+ { cpu32, "68349", 1 },
+ { cpu32, "68360", 1 },
+ { m68881, "68882", 1 },
+ { mcf5200, "5202", 1 },
+ { mcf5200, "5204", 1 },
+ { mcf5200, "5206", 1 },
+ };
static const int n_archs = sizeof (archs) / sizeof (archs[0]);
-/* BCC68000 is for patching in an extra jmp instruction for long offsets
- on the 68000. The 68000 doesn't support long branches with branchs */
+/* This is the assembler relaxation table for m68k. m68k is a rich CISC
+ architecture and we have a lot of relaxation modes. */
+
+/* Macros used in the relaxation code. */
+#define TAB(x,y) (((x) << 2) + (y))
+#define TABTYPE(x) ((x) >> 2)
+
+/* Relaxation states. */
+#define BYTE 0
+#define SHORT 1
+#define LONG 2
+#define SZ_UNDEF 3
-/* This table desribes how you change sizes for the various types of variable
- size expressions. This version only supports two kinds. */
+/* Here are all the relaxation modes we support. First we can relax ordinary
+ branches. On 68020 and higher and on CPU32 all branch instructions take
+ three forms, so on these CPUs all branches always remain as such. When we
+ have to expand to the LONG form on a 68000, though, we substitute an
+ absolute jump instead. This is a direct replacement for unconditional
+ branches and a branch over a jump for conditional branches. However, if the
+ user requires PIC and disables this with --pcrel, we can only relax between
+ BYTE and SHORT forms, punting if that isn't enough. This gives us four
+ different relaxation modes for branches: */
+
+#define BRANCHBWL 0 /* branch byte, word, or long */
+#define BRABSJUNC 1 /* absolute jump for LONG, unconditional */
+#define BRABSJCOND 2 /* absolute jump for LONG, conditional */
+#define BRANCHBW 3 /* branch byte or word */
+
+/* We also relax coprocessor branches and DBcc's. All CPUs that support
+ coprocessor branches support them in word and long forms, so we have only
+ one relaxation mode for them. DBcc's are word only on all CPUs. We can
+ relax them to the LONG form with a branch-around sequence. This sequence
+ can use a long branch (if available) or an absolute jump (if acceptable).
+ This gives us two relaxation modes. If long branches are not available and
+ absolute jumps are not acceptable, we don't relax DBcc's. */
+
+#define FBRANCH 4 /* coprocessor branch */
+#define DBCCLBR 5 /* DBcc relaxable with a long branch */
+#define DBCCABSJ 6 /* DBcc relaxable with an absolute jump */
+
+/* That's all for instruction relaxation. However, we also relax PC-relative
+ operands. Specifically, we have three operand relaxation modes. On the
+ 68000 PC-relative operands can only be 16-bit, but on 68020 and higher and
+ on CPU32 they may be 16-bit or 32-bit. For the latter we relax between the
+ two. Also PC+displacement+index operands in their simple form (with a non-
+ suppressed index without memory indirection) are supported on all CPUs, but
+ on the 68000 the displacement can be 8-bit only, whereas on 68020 and higher
+ and on CPU32 we relax it to SHORT and LONG forms as well using the extended
+ form of the PC+displacement+index operand. Finally, some absolute operands
+ can be relaxed down to 16-bit PC-relative. */
+
+#define PCREL1632 7 /* 16-bit or 32-bit PC-relative */
+#define PCINDEX 8 /* PC+displacement+index */
+#define ABSTOPCREL 9 /* absolute relax down to 16-bit PC-relative */
/* Note that calls to frag_var need to specify the maximum expansion
needed; this is currently 10 bytes for DBCC. */
How far Backward this mode will reach:
How many bytes this mode will add to the size of the frag
Which mode to go to if the offset won't fit in this one
- */
+
+ Please check tc-m68k.h:md_prepare_relax_scan if changing this table. */
relax_typeS md_relax_table[] =
{
- {1, 1, 0, 0}, /* First entries aren't used */
- {1, 1, 0, 0}, /* For no good reason except */
- {1, 1, 0, 0}, /* that the VAX doesn't either */
- {1, 1, 0, 0},
-
- {(127), (-128), 0, TAB (ABRANCH, SHORT)},
- {(32767), (-32768), 2, TAB (ABRANCH, LONG)},
- {0, 0, 4, 0},
- {1, 1, 0, 0},
-
- {1, 1, 0, 0}, /* FBRANCH doesn't come BYTE */
- {(32767), (-32768), 2, TAB (FBRANCH, LONG)},
- {0, 0, 4, 0},
- {1, 1, 0, 0},
-
- {1, 1, 0, 0}, /* PCREL doesn't come BYTE */
- {(32767), (-32768), 2, TAB (PCREL, LONG)},
- {0, 0, 4, 0},
- {1, 1, 0, 0},
-
- {(127), (-128), 0, TAB (BCC68000, SHORT)},
- {(32767), (-32768), 2, TAB (BCC68000, LONG)},
- {0, 0, 6, 0}, /* jmp long space */
- {1, 1, 0, 0},
-
- {1, 1, 0, 0}, /* DBCC doesn't come BYTE */
- {(32767), (-32768), 2, TAB (DBCC, LONG)},
- {0, 0, 10, 0}, /* bra/jmp long space */
- {1, 1, 0, 0},
-
- {1, 1, 0, 0}, /* PCLEA doesn't come BYTE */
- {32767, -32768, 2, TAB (PCLEA, LONG)},
- {0, 0, 6, 0},
- {1, 1, 0, 0},
-
- /* For, e.g., jmp pcrel indexed. */
- {125, -130, 0, TAB (PCINDEX, SHORT)},
- {32765, -32770, 2, TAB (PCINDEX, LONG)},
- {0, 0, 4, 0},
- {1, 1, 0, 0},
+ { 127, -128, 0, TAB (BRANCHBWL, SHORT) },
+ { 32767, -32768, 2, TAB (BRANCHBWL, LONG) },
+ { 0, 0, 4, 0 },
+ { 1, 1, 0, 0 },
+
+ { 127, -128, 0, TAB (BRABSJUNC, SHORT) },
+ { 32767, -32768, 2, TAB (BRABSJUNC, LONG) },
+ { 0, 0, 4, 0 },
+ { 1, 1, 0, 0 },
+
+ { 127, -128, 0, TAB (BRABSJCOND, SHORT) },
+ { 32767, -32768, 2, TAB (BRABSJCOND, LONG) },
+ { 0, 0, 6, 0 },
+ { 1, 1, 0, 0 },
+
+ { 127, -128, 0, TAB (BRANCHBW, SHORT) },
+ { 0, 0, 2, 0 },
+ { 1, 1, 0, 0 },
+ { 1, 1, 0, 0 },
+
+ { 1, 1, 0, 0 }, /* FBRANCH doesn't come BYTE */
+ { 32767, -32768, 2, TAB (FBRANCH, LONG) },
+ { 0, 0, 4, 0 },
+ { 1, 1, 0, 0 },
+
+ { 1, 1, 0, 0 }, /* DBCC doesn't come BYTE */
+ { 32767, -32768, 2, TAB (DBCCLBR, LONG) },
+ { 0, 0, 10, 0 },
+ { 1, 1, 0, 0 },
+
+ { 1, 1, 0, 0 }, /* DBCC doesn't come BYTE */
+ { 32767, -32768, 2, TAB (DBCCABSJ, LONG) },
+ { 0, 0, 10, 0 },
+ { 1, 1, 0, 0 },
+
+ { 1, 1, 0, 0 }, /* PCREL1632 doesn't come BYTE */
+ { 32767, -32768, 2, TAB (PCREL1632, LONG) },
+ { 0, 0, 6, 0 },
+ { 1, 1, 0, 0 },
+
+ { 125, -130, 0, TAB (PCINDEX, SHORT) },
+ { 32765, -32770, 2, TAB (PCINDEX, LONG) },
+ { 0, 0, 4, 0 },
+ { 1, 1, 0, 0 },
+
+ { 1, 1, 0, 0 }, /* ABSTOPCREL doesn't come BYTE */
+ { 32767, -32768, 2, TAB (ABSTOPCREL, LONG) },
+ { 0, 0, 4, 0 },
+ { 1, 1, 0, 0 },
};
/* These are the machine dependent pseudo-ops. These are included so
{0, 0, 0}
};
-
/* The mote pseudo ops are put into the opcode table, since they
don't start with a . they look like opcodes to gas.
*/
extern void obj_coff_section PARAMS ((int));
#endif
-CONST pseudo_typeS mote_pseudo_table[] =
+const pseudo_typeS mote_pseudo_table[] =
{
{"dcl", cons, 4},
extern char *input_line_pointer;
-static char mklower_table[256];
-#define mklower(c) (mklower_table[(unsigned char)(c)])
static char notend_table[256];
static char alt_notend_table[256];
#define notend(s) \
#ifdef OBJ_ELF
+/* Return zero if the reference to SYMBOL from within the same segment may
+ be relaxed. */
+
+/* On an ELF system, we can't relax an externally visible symbol,
+ because it may be overridden by a shared library. However, if
+ TARGET_OS is "elf", then we presume that we are assembling for an
+ embedded system, in which case we don't have to worry about shared
+ libraries, and we can relax any external sym. */
+
+#define relaxable_symbol(symbol) \
+ (!((S_IS_EXTERNAL (symbol) && strcmp (TARGET_OS, "elf") != 0) \
+ || S_IS_WEAK (symbol)))
+
/* Compute the relocation code for a fixup of SIZE bytes, using pc
relative relocation if PCREL is non-zero. PIC says whether a special
pic relocation was requested. */
tc_m68k_fix_adjustable (fixP)
fixS *fixP;
{
- /* Prevent all adjustments to global symbols. */
- if (S_IS_EXTERNAL (fixP->fx_addsy)
- || S_IS_WEAK (fixP->fx_addsy))
- return 0;
-
/* adjust_reloc_syms doesn't know about the GOT */
switch (fixP->fx_r_type)
{
#define get_reloc_code(SIZE,PCREL,OTHER) NO_RELOC
+#define relaxable_symbol(symbol) 1
+
#endif /* OBJ_ELF */
#ifdef BFD_ASSEMBLER
arelent *
tc_gen_reloc (section, fixp)
- asection *section;
+ asection *section ATTRIBUTE_UNUSED;
fixS *fixp;
{
arelent *reloc;
bfd_reloc_code_real_type code;
+ /* If the tcbit is set, then this was a fixup of a negative value
+ that was never resolved. We do not have a reloc to handle this,
+ so just return. We assume that other code will have detected this
+ situation and produced a helpful error message, so we just tell the
+ user that the reloc cannot be produced. */
if (fixp->fx_tcbit)
- abort ();
+ {
+ if (fixp->fx_addsy)
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("Unable to produce reloc against symbol '%s'"),
+ S_GET_NAME (fixp->fx_addsy));
+ return NULL;
+ }
if (fixp->fx_r_type != BFD_RELOC_NONE)
{
reloc->addend = fixp->fx_addnumber;
else
reloc->addend = (section->vma
- + (fixp->fx_pcrel_adjust == 64
- ? -1 : fixp->fx_pcrel_adjust)
+ /* Explicit sign extension in case char is
+ unsigned. */
+ + ((fixp->fx_pcrel_adjust & 0xff) ^ 0x80) - 0x80
+ fixp->fx_addnumber
+ md_pcrel_from (fixp));
#endif
#endif /* BFD_ASSEMBLER */
-/* Return zero if the reference to SYMBOL from within the same segment may
- be relaxed. */
-#ifdef OBJ_ELF
-
-/* On an ELF system, we can't relax an externally visible symbol,
- because it may be overridden by a shared library. However, if
- TARGET_OS is "elf", then we presume that we are assembling for an
- embedded system, in which case we don't have to worry about shared
- libraries, and we can relax anything. */
-
-#define relaxable_symbol(symbol) \
- (strcmp (TARGET_OS, "elf") == 0 \
- || (! S_IS_EXTERNAL (symbol) \
- && ! S_IS_WEAK (symbol)))
-
-#else
-
-#define relaxable_symbol(symbol) 1
-
-#endif
-
/* Handle of the OPCODE hash table. NULL means any use before
m68k_ip_begin() will crash. */
static struct hash_control *op_hash;
instring++; /* skip leading whitespace */
/* Scan up to end of operation-code, which MUST end in end-of-string
- or exactly 1 space. */
+ or exactly 1 space. */
pdot = 0;
for (p = instring; *p != '\0'; p++)
{
for (losing = 0;;)
{
/* If we didn't get the right number of ops, or we have no
- common model with this pattern then reject this pattern. */
+ common model with this pattern then reject this pattern. */
ok_arch |= opcode->m_arch;
if (opsfound != opcode->m_opnum
default:
losing++;
}
- break;
+ break;
case 'n':
switch (opP->mode)
default:
losing++;
}
- break;
+ break;
case 'o':
switch (opP->mode)
default:
losing++;
}
- break;
+ break;
case 'p':
switch (opP->mode)
break;
case DISP:
if (opP->reg == PC || opP->reg == ZPC)
- losing++;
+ losing++;
break;
default:
losing++;
}
- break;
+ break;
case 'q':
switch (opP->mode)
break;
case DISP:
if (opP->reg == PC || opP->reg == ZPC)
- losing++;
+ losing++;
break;
default:
losing++;
break;
}
- break;
+ break;
case 'v':
switch (opP->mode)
break;
case DISP:
if (opP->reg == PC || opP->reg == ZPC)
- losing++;
+ losing++;
break;
default:
losing++;
&& opP->reg != BC))
{
losing++;
- } /* not a cache specifier. */
+ } /* not a cache specifier. */
break;
case '_':
losing++;
/* FIXME: kludge instead of fixing parser:
upper/lower registers are *not* CONTROL
- registers, but ordinary ones. */
+ registers, but ordinary ones. */
if ((opP->reg >= DATA0L && opP->reg <= DATA7L)
|| (opP->reg >= DATA0U && opP->reg <= DATA7U))
opP->mode = DREG;
if (!losing)
{
break;
- } /* got it. */
+ } /* got it. */
opcode = opcode->m_next;
default:
{
int got_one = 0, idx;
- for (idx = 0; idx < sizeof (archs) / sizeof (archs[0]);
+ for (idx = 0;
+ idx < (int) (sizeof (archs) / sizeof (archs[0]));
idx++)
{
if ((archs[idx].arch & ok_arch)
{
add_frag (adds (&opP->disp),
offs (&opP->disp),
- TAB (PCLEA, SZ_UNDEF));
+ TAB (PCREL1632, SZ_UNDEF));
break;
}
}
&& m68k_index_width_default == SIZE_LONG))
nextword |= 0x800;
- if ((opP->index.scale != 1
+ if ((opP->index.scale != 1
&& cpu_of_arch (current_architecture) < m68020)
- || (opP->index.scale == 8
+ || (opP->index.scale == 8
&& arch_coldfire_p (current_architecture)))
{
opP->error =
the frag obstack to make all the bytes
contiguous. */
frag_grow (14);
- nextword += baseo & 0xff;
- addword (nextword);
- add_frag (adds (&opP->disp), offs (&opP->disp),
- TAB (PCINDEX, SZ_UNDEF));
+ nextword += baseo & 0xff;
+ addword (nextword);
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (PCINDEX, SZ_UNDEF));
break;
- }
+ }
}
}
else
addword (nextword);
break;
}
- /* Don't generate pc relative code on 68010 and
- 68000. */
if (isvar (&opP->disp)
&& !subs (&opP->disp)
&& adds (&opP->disp)
cannot be relaxed. */
&& opP->disp.pic_reloc == pic_none
#endif
- && S_GET_SEGMENT (adds (&opP->disp)) == now_seg
- && relaxable_symbol (adds (&opP->disp))
- && HAVE_LONG_BRANCH(current_architecture)
&& !flag_long_jumps
&& !strchr ("~%&$?", s[0]))
{
tmpreg = 0x3A; /* 7.2 */
add_frag (adds (&opP->disp),
offs (&opP->disp),
- TAB (PCREL, SZ_UNDEF));
+ TAB (ABSTOPCREL, SZ_UNDEF));
break;
}
/* Fall through into long */
case FPREG:
default:
as_bad (_("unknown/incorrect operand"));
- /* abort(); */
+ /* abort (); */
}
install_gen_operand (s[1], tmpreg);
break;
switch (s[1])
{
case 'B':
- /* The pc_fix argument winds up in fx_pcrel_adjust,
- which is a char, and may therefore be unsigned. We
- want to pass -1, but we pass 64 instead, and convert
- back in md_pcrel_from. */
- add_fix ('B', &opP->disp, 1, 64);
+ add_fix ('B', &opP->disp, 1, -1);
break;
case 'W':
add_fix ('w', &opP->disp, 1, 0);
break;
case 'L':
long_branch:
- if (!HAVE_LONG_BRANCH(current_architecture))
+ if (! HAVE_LONG_BRANCH (current_architecture))
as_warn (_("Can't use long branches on 68000/68010/5200"));
- the_ins.opcode[the_ins.numo - 1] |= 0xff;
+ the_ins.opcode[0] |= 0xff;
add_fix ('l', &opP->disp, 1, 0);
addword (0);
addword (0);
if (opP->disp.pic_reloc != pic_none)
goto long_branch;
#endif
-
/* This could either be a symbol, or an absolute
- address. No matter, the frag hacking will finger it
- out. Not quite: it can't switch from BRANCH to
- BCC68000 for the case where opnd is absolute (it
- needs to use the 68000 hack since no conditional abs
- jumps). */
- if (( !HAVE_LONG_BRANCH(current_architecture)
- || (0 == adds (&opP->disp)))
- && (the_ins.opcode[0] >= 0x6200)
- && (the_ins.opcode[0] <= 0x6f00))
+ address. If it's an absolute address, turn it into
+ an absolute jump right here and keep it out of the
+ relaxer. */
+ if (adds (&opP->disp) == 0)
+ {
+ if (the_ins.opcode[0] == 0x6000) /* jbra */
+ the_ins.opcode[0] = 0x4EF9;
+ else if (the_ins.opcode[0] == 0x6100) /* jbsr */
+ the_ins.opcode[0] = 0x4EB9;
+ else /* jCC */
+ {
+ the_ins.opcode[0] ^= 0x0100;
+ the_ins.opcode[0] |= 0x0006;
+ addword (0x4EF9);
+ }
+ add_fix ('l', &opP->disp, 0, 0);
+ addword (0);
+ addword (0);
+ break;
+ }
+
+ /* Now we know it's going into the relaxer. Now figure
+ out which mode. We try in this order of preference:
+ long branch, absolute jump, byte/word branches only. */
+ if (HAVE_LONG_BRANCH (current_architecture))
add_frag (adds (&opP->disp), offs (&opP->disp),
- TAB (BCC68000, SZ_UNDEF));
+ TAB (BRANCHBWL, SZ_UNDEF));
+ else if (! flag_keep_pcrel)
+ {
+ if ((the_ins.opcode[0] == 0x6000)
+ || (the_ins.opcode[0] == 0x6100))
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (BRABSJUNC, SZ_UNDEF));
+ else
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (BRABSJCOND, SZ_UNDEF));
+ }
else
add_frag (adds (&opP->disp), offs (&opP->disp),
- TAB (ABRANCH, SZ_UNDEF));
+ TAB (BRANCHBW, SZ_UNDEF));
break;
case 'w':
if (isvar (&opP->disp))
{
-#if 1
- /* check for DBcc instruction */
- if ((the_ins.opcode[0] & 0xf0f8) == 0x50c8)
+ /* Check for DBcc instructions. We can relax them,
+ but only if we have long branches and/or absolute
+ jumps. */
+ if (((the_ins.opcode[0] & 0xf0f8) == 0x50c8)
+ && (HAVE_LONG_BRANCH (current_architecture)
+ || (! flag_keep_pcrel)))
{
- /* size varies if patch */
- /* needed for long form */
- add_frag (adds (&opP->disp), offs (&opP->disp),
- TAB (DBCC, SZ_UNDEF));
+ if (HAVE_LONG_BRANCH (current_architecture))
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (DBCCLBR, SZ_UNDEF));
+ else
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (DBCCABSJ, SZ_UNDEF));
break;
}
-#endif
add_fix ('w', &opP->disp, 1, 0);
}
addword (0);
addword (0);
break;
case 'c': /* Var size Coprocesssor branches */
- if (subs (&opP->disp))
- {
- add_fix ('l', &opP->disp, 1, 0);
- add_frag ((symbolS *) 0, (offsetT) 0, TAB (FBRANCH, LONG));
- }
- else if (adds (&opP->disp))
- add_frag (adds (&opP->disp), offs (&opP->disp),
- TAB (FBRANCH, SZ_UNDEF));
- else
+ if (subs (&opP->disp) || (adds (&opP->disp) == 0))
{
- /* add_frag ((symbolS *) 0, offs (&opP->disp),
- TAB(FBRANCH,SHORT)); */
the_ins.opcode[the_ins.numo - 1] |= 0x40;
add_fix ('l', &opP->disp, 1, 0);
addword (0);
addword (0);
}
+ else
+ add_frag (adds (&opP->disp), offs (&opP->disp),
+ TAB (FBRANCH, SZ_UNDEF));
break;
default:
abort ();
case 'O':
tmpreg = ((opP->mode == DREG)
- ? 0x20 + opP->reg - DATA
+ ? 0x20 + (int) (opP->reg - DATA)
: (get_num (&opP->disp, 40) & 0x1F));
install_operand (s[1], tmpreg);
break;
install_operand (s[1], tmpreg);
break;
#ifndef NO_68851
- /* JF: These are out of order, I fear. */
+ /* JF: These are out of order, I fear. */
case 'f':
switch (opP->reg)
{
}
/* By the time whe get here (FINALLY) the_ins contains the complete
- instruction, ready to be emitted. . . */
+ instruction, ready to be emitted. . . */
}
static int
&zero_address_frag));
for (i = 0; regname[i]; i++)
- buf[i] = islower (regname[i]) ? toupper (regname[i]) : regname[i];
+ buf[i] = TOUPPER (regname[i]);
buf[i] = '\0';
symbol_table_insert (symbol_new (buf, reg_section, regnum,
{ "za6", ZADDR6 },
{ "za7", ZADDR7 },
- /* Upper and lower data and address registers, used by macw and msacw. */
+ /* Upper and lower data and address registers, used by macw and msacw. */
{ "d0l", DATA0L },
{ "d1l", DATA1L },
{ "d2l", DATA2L },
current_label = NULL;
}
+#ifdef OBJ_ELF
+ /* Tie dwarf2 debug info to the address at the start of the insn. */
+ dwarf2_emit_insn (0);
+#endif
+
if (the_ins.nfrag == 0)
{
/* No frag hacking involved; just put it out */
}
/* There's some frag hacking */
+ {
+ /* Calculate the max frag size. */
+ int wid;
+
+ wid = 2 * the_ins.fragb[0].fragoff;
+ for (n = 1; n < the_ins.nfrag; n++)
+ wid += 2 * (the_ins.numo - the_ins.fragb[n - 1].fragoff);
+ /* frag_var part. */
+ wid += 10;
+ /* Make sure the whole insn fits in one chunk, in particular that
+ the var part is attached, as we access one byte before the
+ variable frag for byte branches. */
+ frag_grow (wid);
+ }
+
for (n = 0, fromP = &the_ins.opcode[0]; n < the_ins.nfrag; n++)
{
int wid;
my lord ghod hath spoken, so we do it this way. Excuse the ugly var
names. */
- register const struct m68k_opcode *ins;
- register struct m68k_incant *hack, *slak;
- register const char *retval = 0; /* empty string, or error msg text */
- register unsigned int i;
- register char c;
+ const struct m68k_opcode *ins;
+ struct m68k_incant *hack, *slak;
+ const char *retval = 0; /* empty string, or error msg text */
+ int i;
if (flag_mri)
{
{
ins = &m68k_opcodes[i];
/* We *could* ignore insns that don't match our arch here
- but just leaving them out of the hash. */
+ but just leaving them out of the hash. */
slak->m_operands = ins->args;
slak->m_opnum = strlen (slak->m_operands) / 2;
slak->m_arch = ins->arch;
{ "bsr", "jbsr", },
};
- for (i = 0; i < sizeof mri_aliases / sizeof mri_aliases[0]; i++)
+ for (i = 0;
+ i < (int) (sizeof mri_aliases / sizeof mri_aliases[0]);
+ i++)
{
const char *name = mri_aliases[i].primary;
const char *alias = mri_aliases[i].alias;
}
}
- for (i = 0; i < sizeof (mklower_table); i++)
- mklower_table[i] = (isupper (c = (char) i)) ? tolower (c) : c;
-
- for (i = 0; i < sizeof (notend_table); i++)
+ for (i = 0; i < (int) sizeof (notend_table); i++)
{
notend_table[i] = 0;
alt_notend_table[i] = 0;
/* Note which set of "movec" control registers is available. */
switch (cpu_of_arch (current_architecture))
{
+ case 0:
+ as_warn (_("architecture not yet selected: defaulting to 68020"));
+ control_regs = m68020_control_regs;
+ break;
+
case m68000:
control_regs = m68000_control_regs;
break;
case mcf5200:
case mcf5206e:
case mcf5307:
+ case mcf5407:
control_regs = mcf_control_regs;
break;
default:
#define MAX_LITTLENUMS 6
/* Turn a string in input_line_pointer into a floating point constant
- of type type, and store the appropriate bytes in *litP. The number
- of LITTLENUMS emitted is stored in *sizeP . An error message is
+ of type TYPE, and store the appropriate bytes in *LITP. The number
+ of LITTLENUMS emitted is stored in *SIZEP. An error message is
returned, or NULL on OK. */
char *
number_to_chars_bigendian (buf, val, n);
}
-static void
-md_apply_fix_2 (fixP, val)
+void
+md_apply_fix3 (fixP, valP, seg)
fixS *fixP;
- offsetT val;
+ valueT *valP;
+ segT seg ATTRIBUTE_UNUSED;
{
+ offsetT val = *valP;
addressT upper_limit;
offsetT lower_limit;
buf += fixP->fx_where;
/* end ibm compiler workaround */
- if (val & 0x80000000)
- val |= ~(addressT)0x7fffffff;
- else
- val &= 0x7fffffff;
+ val = ((val & 0xffffffff) ^ 0x80000000) - 0x80000000;
+
+ if (fixP->fx_addsy == NULL && fixP->fx_pcrel == 0)
+ fixP->fx_done = 1;
#ifdef OBJ_ELF
if (fixP->fx_addsy)
switch (fixP->fx_size)
{
- /* The cast to offsetT below are necessary to make code correct for
- machines where ints are smaller than offsetT */
+ /* The cast to offsetT below are necessary to make code
+ correct for machines where ints are smaller than offsetT. */
case 1:
*buf++ = val;
upper_limit = 0x7f;
as_bad_where (fixP->fx_file, fixP->fx_line, _("invalid byte branch offset"));
}
-#ifdef BFD_ASSEMBLER
-int
-md_apply_fix (fixP, valp)
- fixS *fixP;
- valueT *valp;
-{
- md_apply_fix_2 (fixP, (addressT) *valp);
- return 1;
-}
-#else
-void md_apply_fix (fixP, val)
- fixS *fixP;
- long val;
-{
- md_apply_fix_2 (fixP, (addressT) val);
-}
-#endif
-
/* *fragP has been relaxed to its final size, and now needs to have
the bytes inside it modified to conform to the new size There is UGLY
MAGIC here. ..
register fragS *fragP;
{
long disp;
- long ext = 0;
fixS *fixP;
/* Address in object code of the displacement. */
/* Address in gas core of the place to store the displacement. */
/* This convinces the native rs6000 compiler to generate the code we
- want. */
+ want. */
register char *buffer_address = fragP->fr_literal;
buffer_address += fragP->fr_fix;
/* end ibm compiler workaround */
disp = fragP->fr_symbol ? S_GET_VALUE (fragP->fr_symbol) : 0;
disp = (disp + fragP->fr_offset) - object_address;
-#ifdef BFD_ASSEMBLER
- disp += symbol_get_frag (fragP->fr_symbol)->fr_address;
-#endif
-
switch (fragP->fr_subtype)
{
- case TAB (BCC68000, BYTE):
- case TAB (ABRANCH, BYTE):
+ case TAB (BRANCHBWL, BYTE):
+ case TAB (BRABSJUNC, BYTE):
+ case TAB (BRABSJCOND, BYTE):
+ case TAB (BRANCHBW, BYTE):
know (issbyte (disp));
if (disp == 0)
- as_bad (_("short branch with zero offset: use :w"));
- fragP->fr_opcode[1] = disp;
- ext = 0;
- break;
- case TAB (DBCC, SHORT):
- know (issword (disp));
- ext = 2;
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("short branch with zero offset: use :w"));
+ fixP = fix_new (fragP, fragP->fr_fix - 1, 1, fragP->fr_symbol,
+ fragP->fr_offset, 1, RELAX_RELOC_PC8);
+ fixP->fx_pcrel_adjust = -1;
break;
- case TAB (BCC68000, SHORT):
- case TAB (ABRANCH, SHORT):
- know (issword (disp));
+ case TAB (BRANCHBWL, SHORT):
+ case TAB (BRABSJUNC, SHORT):
+ case TAB (BRABSJCOND, SHORT):
+ case TAB (BRANCHBW, SHORT):
fragP->fr_opcode[1] = 0x00;
- ext = 2;
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC16);
+ fragP->fr_fix += 2;
+ break;
+ case TAB (BRANCHBWL, LONG):
+ fragP->fr_opcode[1] = (char) 0xFF;
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC32);
+ fragP->fr_fix += 4;
break;
- case TAB (ABRANCH, LONG):
- if (!HAVE_LONG_BRANCH(current_architecture))
+ case TAB (BRABSJUNC, LONG):
+ if (fragP->fr_opcode[0] == 0x61) /* jbsr */
{
- if (fragP->fr_opcode[0] == 0x61)
- /* BSR */
- {
- fragP->fr_opcode[0] = 0x4E;
- fragP->fr_opcode[1] = (char) 0xB9; /* JBSR with ABSL LONG offset */
-
- fix_new (fragP,
- fragP->fr_fix,
- 4,
- fragP->fr_symbol,
- fragP->fr_offset,
- 0,
- NO_RELOC);
-
- fragP->fr_fix += 4;
- ext = 0;
- }
- /* BRA */
- else if (fragP->fr_opcode[0] == 0x60)
- {
- fragP->fr_opcode[0] = 0x4E;
- fragP->fr_opcode[1] = (char) 0xF9; /* JMP with ABSL LONG offset */
- fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol,
- fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix += 4;
- ext = 0;
- }
- else
- {
- as_bad (_("Long branch offset not supported."));
- }
+ fragP->fr_opcode[0] = 0x4E;
+ fragP->fr_opcode[1] = (char) 0xB9; /* JSR with ABSL LONG operand */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
+ 0, RELAX_RELOC_ABS32);
+ fragP->fr_fix += 4;
+ }
+ else if (fragP->fr_opcode[0] == 0x60) /* jbra */
+ {
+ fragP->fr_opcode[0] = 0x4E;
+ fragP->fr_opcode[1] = (char) 0xF9; /* JMP with ABSL LONG operand */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
+ 0, RELAX_RELOC_ABS32);
+ fragP->fr_fix += 4;
}
else
{
- fragP->fr_opcode[1] = (char) 0xff;
- ext = 4;
+ /* This cannot happen, because jbsr and jbra are the only two
+ unconditional branches. */
+ abort ();
}
break;
- case TAB (BCC68000, LONG):
- /* only Bcc 68000 instructions can come here */
- /* change bcc into b!cc/jmp absl long */
+ case TAB (BRABSJCOND, LONG):
+ /* Only Bcc 68000 instructions can come here. */
+ /* Change bcc into b!cc/jmp absl long. */
+
fragP->fr_opcode[0] ^= 0x01; /* invert bcc */
fragP->fr_opcode[1] = 0x6;/* branch offset = 6 */
/* JF: these used to be fr_opcode[2,3], but they may be in a
different frag, in which case refering to them is a no-no.
- Only fr_opcode[0,1] are guaranteed to work. */
+ Only fr_opcode[0,1] are guaranteed to work. */
*buffer_address++ = 0x4e; /* put in jmp long (0x4ef9) */
*buffer_address++ = (char) 0xf9;
fragP->fr_fix += 2; /* account for jmp instruction */
fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol,
- fragP->fr_offset, 0, NO_RELOC);
+ fragP->fr_offset, 0, RELAX_RELOC_ABS32);
fragP->fr_fix += 4;
- ext = 0;
break;
- case TAB (DBCC, LONG):
- /* only DBcc 68000 instructions can come here */
- /* change dbcc into dbcc/jmp absl long */
+ case TAB (FBRANCH, SHORT):
+ know ((fragP->fr_opcode[1] & 0x40) == 0);
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC16);
+ fragP->fr_fix += 2;
+ break;
+ case TAB (FBRANCH, LONG):
+ fragP->fr_opcode[1] |= 0x40; /* Turn on LONG bit */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC32);
+ fragP->fr_fix += 4;
+ break;
+ case TAB (DBCCLBR, SHORT):
+ case TAB (DBCCABSJ, SHORT):
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC16);
+ fragP->fr_fix += 2;
+ break;
+ case TAB (DBCCLBR, LONG):
+ /* only DBcc instructions can come here */
+ /* Change dbcc into dbcc/bral. */
+
/* JF: these used to be fr_opcode[2-7], but that's wrong */
*buffer_address++ = 0x00; /* branch offset = 4 */
*buffer_address++ = 0x04;
*buffer_address++ = 0x60; /* put in bra pc+6 */
*buffer_address++ = 0x06;
- *buffer_address++ = 0x4e; /* put in jmp long (0x4ef9) */
- *buffer_address++ = (char) 0xf9;
+ *buffer_address++ = 0x60; /* Put in bral (0x60ff). */
+ *buffer_address++ = (char) 0xff;
fragP->fr_fix += 6; /* account for bra/jmp instructions */
- fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol,
- fragP->fr_offset, 0, NO_RELOC);
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset, 1,
+ RELAX_RELOC_PC32);
fragP->fr_fix += 4;
- ext = 0;
break;
- case TAB (FBRANCH, SHORT):
- know ((fragP->fr_opcode[1] & 0x40) == 0);
- ext = 2;
- break;
- case TAB (FBRANCH, LONG):
- fragP->fr_opcode[1] |= 0x40; /* Turn on LONG bit */
- ext = 4;
- break;
- case TAB (PCREL, SHORT):
- ext = 2;
- break;
- case TAB (PCREL, LONG):
- /* The thing to do here is force it to ABSOLUTE LONG, since
- PCREL is really trying to shorten an ABSOLUTE address anyway */
- /* JF FOO This code has not been tested */
- fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
- 0, NO_RELOC);
- if ((fragP->fr_opcode[1] & 0x3F) != 0x3A)
- as_bad (_("Internal error (long PC-relative operand) for insn 0x%04x at 0x%lx"),
- (unsigned) fragP->fr_opcode[0],
- (unsigned long) fragP->fr_address);
- fragP->fr_opcode[1] &= ~0x3F;
- fragP->fr_opcode[1] |= 0x39; /* Mode 7.1 */
+ case TAB (DBCCABSJ, LONG):
+ /* only DBcc instructions can come here */
+ /* Change dbcc into dbcc/jmp. */
+
+ /* JF: these used to be fr_opcode[2-7], but that's wrong */
+ *buffer_address++ = 0x00; /* branch offset = 4 */
+ *buffer_address++ = 0x04;
+ *buffer_address++ = 0x60; /* put in bra pc+6 */
+ *buffer_address++ = 0x06;
+ *buffer_address++ = 0x4e; /* Put in jmp long (0x4ef9). */
+ *buffer_address++ = (char) 0xf9;
+
+ fragP->fr_fix += 6; /* account for bra/jmp instructions */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset, 0,
+ RELAX_RELOC_ABS32);
fragP->fr_fix += 4;
- ext = 0;
break;
- case TAB (PCLEA, SHORT):
- fix_new (fragP, (int) (fragP->fr_fix), 2, fragP->fr_symbol,
- fragP->fr_offset, 1, NO_RELOC);
+ case TAB (PCREL1632, SHORT):
fragP->fr_opcode[1] &= ~0x3F;
fragP->fr_opcode[1] |= 0x3A; /* 072 - mode 7.2 */
- ext = 2;
+ fix_new (fragP, (int) (fragP->fr_fix), 2, fragP->fr_symbol,
+ fragP->fr_offset, 1, RELAX_RELOC_PC16);
+ fragP->fr_fix += 2;
break;
- case TAB (PCLEA, LONG):
- fixP = fix_new (fragP, (int) (fragP->fr_fix) + 2, 4, fragP->fr_symbol,
- fragP->fr_offset, 1, NO_RELOC);
- fixP->fx_pcrel_adjust = 2;
+ case TAB (PCREL1632, LONG):
/* Already set to mode 7.3; this indicates: PC indirect with
suppressed index, 32-bit displacement. */
*buffer_address++ = 0x01;
*buffer_address++ = 0x70;
fragP->fr_fix += 2;
- ext = 4;
+ fixP = fix_new (fragP, (int) (fragP->fr_fix), 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, RELAX_RELOC_PC32);
+ fixP->fx_pcrel_adjust = 2;
+ fragP->fr_fix += 4;
break;
-
case TAB (PCINDEX, BYTE):
- disp += 2;
- if (!issbyte (disp))
- {
- as_bad (_("displacement doesn't fit in one byte"));
- disp = 0;
- }
assert (fragP->fr_fix >= 2);
buffer_address[-2] &= ~1;
- buffer_address[-1] = disp;
- ext = 0;
+ fixP = fix_new (fragP, fragP->fr_fix - 1, 1, fragP->fr_symbol,
+ fragP->fr_offset, 1, RELAX_RELOC_PC8);
+ fixP->fx_pcrel_adjust = 1;
break;
case TAB (PCINDEX, SHORT):
- disp += 2;
- assert (issword (disp));
assert (fragP->fr_fix >= 2);
buffer_address[-2] |= 0x1;
buffer_address[-1] = 0x20;
fixP = fix_new (fragP, (int) (fragP->fr_fix), 2, fragP->fr_symbol,
- fragP->fr_offset, (fragP->fr_opcode[1] & 077) == 073,
- NO_RELOC);
+ fragP->fr_offset, 1, RELAX_RELOC_PC16);
fixP->fx_pcrel_adjust = 2;
- ext = 2;
+ fragP->fr_fix += 2;
break;
case TAB (PCINDEX, LONG):
- disp += 2;
- fixP = fix_new (fragP, (int) (fragP->fr_fix), 4, fragP->fr_symbol,
- fragP->fr_offset, (fragP->fr_opcode[1] & 077) == 073,
- NO_RELOC);
- fixP->fx_pcrel_adjust = 2;
assert (fragP->fr_fix >= 2);
buffer_address[-2] |= 0x1;
buffer_address[-1] = 0x30;
- ext = 4;
+ fixP = fix_new (fragP, (int) (fragP->fr_fix), 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, RELAX_RELOC_PC32);
+ fixP->fx_pcrel_adjust = 2;
+ fragP->fr_fix += 4;
+ break;
+ case TAB (ABSTOPCREL, SHORT):
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset,
+ 1, RELAX_RELOC_PC16);
+ fragP->fr_fix += 2;
+ break;
+ case TAB (ABSTOPCREL, LONG):
+ /* The thing to do here is force it to ABSOLUTE LONG, since
+ ABSTOPCREL is really trying to shorten an ABSOLUTE address anyway */
+ if ((fragP->fr_opcode[1] & 0x3F) != 0x3A)
+ abort ();
+ fragP->fr_opcode[1] &= ~0x3F;
+ fragP->fr_opcode[1] |= 0x39; /* Mode 7.1 */
+ fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol, fragP->fr_offset,
+ 0, RELAX_RELOC_ABS32);
+ fragP->fr_fix += 4;
break;
- }
-
- if (ext)
- {
- md_number_to_chars (buffer_address, (long) disp, (int) ext);
- fragP->fr_fix += ext;
}
}
void
md_convert_frag (headers, sec, fragP)
- object_headers *headers;
- segT sec;
+ object_headers *headers ATTRIBUTE_UNUSED;
+ segT sec ATTRIBUTE_UNUSED;
fragS *fragP;
{
md_convert_frag_1 (fragP);
register fragS *fragP;
segT segment;
{
- int old_fix;
- register char *buffer_address = fragP->fr_fix + fragP->fr_literal;
-
- old_fix = fragP->fr_fix;
-
- /* handle SZ_UNDEF first, it can be changed to BYTE or SHORT */
+ /* Handle SZ_UNDEF first, it can be changed to BYTE or SHORT. */
switch (fragP->fr_subtype)
{
-
- case TAB (ABRANCH, SZ_UNDEF):
+ case TAB (BRANCHBWL, SZ_UNDEF):
+ case TAB (BRABSJUNC, SZ_UNDEF):
+ case TAB (BRABSJCOND, SZ_UNDEF):
{
- if ((fragP->fr_symbol != NULL) /* Not absolute */
- && S_GET_SEGMENT (fragP->fr_symbol) == segment
+ if (S_GET_SEGMENT (fragP->fr_symbol) == segment
&& relaxable_symbol (fragP->fr_symbol))
{
fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), BYTE);
- break;
- }
- else if ((fragP->fr_symbol == 0) || !HAVE_LONG_BRANCH(current_architecture))
- {
- /* On 68000, or for absolute value, switch to abs long */
- /* FIXME, we should check abs val, pick short or long */
- if (fragP->fr_opcode[0] == 0x61)
- {
- fragP->fr_opcode[0] = 0x4E;
- fragP->fr_opcode[1] = (char) 0xB9; /* JBSR with ABSL LONG offset */
- fix_new (fragP, fragP->fr_fix, 4,
- fragP->fr_symbol, fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix += 4;
- frag_wane (fragP);
- }
- else if (fragP->fr_opcode[0] == 0x60)
- {
- fragP->fr_opcode[0] = 0x4E;
- fragP->fr_opcode[1] = (char) 0xF9; /* JMP with ABSL LONG offset */
- fix_new (fragP, fragP->fr_fix, 4,
- fragP->fr_symbol, fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix += 4;
- frag_wane (fragP);
- }
- else
- {
- as_warn (_("Long branch offset to extern symbol not supported."));
- }
- }
- else
- { /* Symbol is still undefined. Make it simple */
- fix_new (fragP, (int) (fragP->fr_fix), 4, fragP->fr_symbol,
- fragP->fr_offset, 1, NO_RELOC);
- fragP->fr_fix += 4;
- fragP->fr_opcode[1] = (char) 0xff;
- frag_wane (fragP);
- break;
- }
-
- break;
- } /* case TAB(ABRANCH,SZ_UNDEF) */
-
- case TAB (FBRANCH, SZ_UNDEF):
- {
- if ((S_GET_SEGMENT (fragP->fr_symbol) == segment
- && relaxable_symbol (fragP->fr_symbol))
- || flag_short_refs)
- {
- fragP->fr_subtype = TAB (FBRANCH, SHORT);
- fragP->fr_var += 2;
- }
- else
- {
- fix_new (fragP, (int) fragP->fr_fix, 4, fragP->fr_symbol,
- fragP->fr_offset, 1, NO_RELOC);
- fragP->fr_fix += 4;
- fragP->fr_opcode[1] |= 0x40; /* Turn on LONG bit */
- frag_wane (fragP);
}
- break;
- } /* TAB(FBRANCH,SZ_UNDEF) */
-
- case TAB (PCREL, SZ_UNDEF):
- {
- if ((S_GET_SEGMENT (fragP->fr_symbol) == segment
- && relaxable_symbol (fragP->fr_symbol))
- || flag_short_refs
- || cpu_of_arch (current_architecture) < m68020
- || cpu_of_arch (current_architecture) == mcf5200)
+ else if (flag_short_refs)
{
- fragP->fr_subtype = TAB (PCREL, SHORT);
- fragP->fr_var += 2;
+ /* Symbol is undefined and we want short ref. */
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), SHORT);
}
else
{
- fragP->fr_subtype = TAB (PCREL, LONG);
- fragP->fr_var += 4;
+ /* Symbol is still undefined. Make it LONG. */
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), LONG);
}
break;
- } /* TAB(PCREL,SZ_UNDEF) */
-
- case TAB (BCC68000, SZ_UNDEF):
- {
- if ((fragP->fr_symbol != NULL)
- && S_GET_SEGMENT (fragP->fr_symbol) == segment
- && relaxable_symbol (fragP->fr_symbol))
- {
- fragP->fr_subtype = TAB (BCC68000, BYTE);
- break;
- }
- /* only Bcc 68000 instructions can come here */
- /* change bcc into b!cc/jmp absl long */
- fragP->fr_opcode[0] ^= 0x01; /* invert bcc */
- if (flag_short_refs)
- {
- fragP->fr_opcode[1] = 0x04; /* branch offset = 6 */
- /* JF: these were fr_opcode[2,3] */
- buffer_address[0] = 0x4e; /* put in jmp long (0x4ef9) */
- buffer_address[1] = (char) 0xf8;
- fragP->fr_fix += 2; /* account for jmp instruction */
- fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol,
- fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix += 2;
- }
- else
- {
- fragP->fr_opcode[1] = 0x06; /* branch offset = 6 */
- /* JF: these were fr_opcode[2,3] */
- buffer_address[0] = 0x4e; /* put in jmp long (0x4ef9) */
- buffer_address[1] = (char) 0xf9;
- fragP->fr_fix += 2; /* account for jmp instruction */
- fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol,
- fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix += 4;
- }
- frag_wane (fragP);
- break;
- } /* case TAB(BCC68000,SZ_UNDEF) */
+ }
- case TAB (DBCC, SZ_UNDEF):
+ case TAB (BRANCHBW, SZ_UNDEF):
{
- if (fragP->fr_symbol != NULL
- && S_GET_SEGMENT (fragP->fr_symbol) == segment
+ if (S_GET_SEGMENT (fragP->fr_symbol) == segment
&& relaxable_symbol (fragP->fr_symbol))
{
- fragP->fr_subtype = TAB (DBCC, SHORT);
- fragP->fr_var += 2;
- break;
- }
- /* only DBcc 68000 instructions can come here */
- /* change dbcc into dbcc/jmp absl long */
- /* JF: these used to be fr_opcode[2-4], which is wrong. */
- buffer_address[0] = 0x00; /* branch offset = 4 */
- buffer_address[1] = 0x04;
- buffer_address[2] = 0x60; /* put in bra pc + ... */
-
- if (flag_short_refs)
- {
- /* JF: these were fr_opcode[5-7] */
- buffer_address[3] = 0x04; /* plus 4 */
- buffer_address[4] = 0x4e; /* Put in Jump Word */
- buffer_address[5] = (char) 0xf8;
- fragP->fr_fix += 6; /* account for bra/jmp instruction */
- fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol,
- fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix += 2;
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), BYTE);
}
else
{
- /* JF: these were fr_opcode[5-7] */
- buffer_address[3] = 0x06; /* Plus 6 */
- buffer_address[4] = 0x4e; /* put in jmp long (0x4ef9) */
- buffer_address[5] = (char) 0xf9;
- fragP->fr_fix += 6; /* account for bra/jmp instruction */
- fix_new (fragP, fragP->fr_fix, 4, fragP->fr_symbol,
- fragP->fr_offset, 0, NO_RELOC);
- fragP->fr_fix += 4;
+ /* Symbol is undefined and we don't have long branches. */
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), SHORT);
}
-
- frag_wane (fragP);
break;
- } /* case TAB(DBCC,SZ_UNDEF) */
+ }
- case TAB (PCLEA, SZ_UNDEF):
+ case TAB (FBRANCH, SZ_UNDEF):
+ case TAB (DBCCLBR, SZ_UNDEF):
+ case TAB (DBCCABSJ, SZ_UNDEF):
+ case TAB (PCREL1632, SZ_UNDEF):
{
- if (((S_GET_SEGMENT (fragP->fr_symbol)) == segment
+ if ((S_GET_SEGMENT (fragP->fr_symbol) == segment
&& relaxable_symbol (fragP->fr_symbol))
- || flag_short_refs
- || cpu_of_arch (current_architecture) < m68020
- || cpu_of_arch (current_architecture) == mcf5200)
+ || flag_short_refs)
{
- fragP->fr_subtype = TAB (PCLEA, SHORT);
- fragP->fr_var += 2;
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), SHORT);
}
else
{
- fragP->fr_subtype = TAB (PCLEA, LONG);
- fragP->fr_var += 6;
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), LONG);
}
break;
- } /* TAB(PCLEA,SZ_UNDEF) */
+ }
case TAB (PCINDEX, SZ_UNDEF):
if ((S_GET_SEGMENT (fragP->fr_symbol) == segment
- && relaxable_symbol (fragP->fr_symbol))
- || cpu_of_arch (current_architecture) < m68020
- || cpu_of_arch (current_architecture) == mcf5200)
+ && relaxable_symbol (fragP->fr_symbol)))
{
fragP->fr_subtype = TAB (PCINDEX, BYTE);
}
else
{
fragP->fr_subtype = TAB (PCINDEX, LONG);
- fragP->fr_var += 4;
}
break;
+ case TAB (ABSTOPCREL, SZ_UNDEF):
+ {
+ if ((S_GET_SEGMENT (fragP->fr_symbol) == segment
+ && relaxable_symbol (fragP->fr_symbol)))
+ {
+ fragP->fr_subtype = TAB (ABSTOPCREL, SHORT);
+ }
+ else
+ {
+ fragP->fr_subtype = TAB (ABSTOPCREL, LONG);
+ }
+ break;
+ }
+
default:
break;
}
- /* now that SZ_UNDEF are taken care of, check others */
+ /* Now that SZ_UNDEF are taken care of, check others. */
switch (fragP->fr_subtype)
{
- case TAB (BCC68000, BYTE):
- case TAB (ABRANCH, BYTE):
+ case TAB (BRANCHBWL, BYTE):
+ case TAB (BRABSJUNC, BYTE):
+ case TAB (BRABSJCOND, BYTE):
+ case TAB (BRANCHBW, BYTE):
/* We can't do a short jump to the next instruction, so in that
- case we force word mode. At this point S_GET_VALUE should
- return the offset of the symbol within its frag. If the
- symbol is at the start of a frag, and it is the next frag
- with any data in it (usually this is just the next frag, but
- assembler listings may introduce empty frags), we must use
- word mode. */
- if (fragP->fr_symbol && S_GET_VALUE (fragP->fr_symbol) == 0)
+ case we force word mode. If the symbol is at the start of a
+ frag, and it is the next frag with any data in it (usually
+ this is just the next frag, but assembler listings may
+ introduce empty frags), we must use word mode. */
+ if (fragP->fr_symbol)
{
- fragS *stop;
- fragS *l;
+ fragS *sym_frag;
- stop = symbol_get_frag (fragP->fr_symbol);
- for (l = fragP->fr_next; l != stop; l = l->fr_next)
- if (l->fr_fix + l->fr_var != 0)
- break;
- if (l == stop)
+ sym_frag = symbol_get_frag (fragP->fr_symbol);
+ if (S_GET_VALUE (fragP->fr_symbol) == sym_frag->fr_address)
{
- fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), SHORT);
- fragP->fr_var += 2;
+ fragS *l;
+
+ for (l = fragP->fr_next; l && l != sym_frag; l = l->fr_next)
+ if (l->fr_fix != 0)
+ break;
+ if (l == sym_frag)
+ fragP->fr_subtype = TAB (TABTYPE (fragP->fr_subtype), SHORT);
}
}
break;
default:
break;
}
- return fragP->fr_var + fragP->fr_fix - old_fix;
+ return md_relax_table[fragP->fr_subtype].rlx_length;
}
#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
bit 7 as pcrel, bits 6 & 5 as length, bit 4 as pcrel, and the lower
nibble as nuthin. (on Sun 3 at least) */
/* Translate the internal relocation information into target-specific
- format. */
+ format. */
#ifdef comment
void
md_ri_to_chars (the_bytes, ri)
* Out: GNU LD relocation length code: 0, 1, or 2.
*/
- static CONST unsigned char nbytes_r_length[] = {42, 0, 1, 42, 2};
+ static const unsigned char nbytes_r_length[] = {42, 0, 1, 42, 2};
long r_symbolnum;
know (fixP->fx_addsy != NULL);
#endif /* OBJ_AOUT or OBJ_BOUT */
#ifndef WORKING_DOT_WORD
-CONST int md_short_jump_size = 4;
-CONST int md_long_jump_size = 6;
+const int md_short_jump_size = 4;
+const int md_long_jump_size = 6;
void
md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol)
temp = 1; /* JF should be 2? */
temp_fill = get_absolute_expression ();
- if (!need_pass_2) /* Never make frag if expect extra pass. */
+ if (!need_pass_2) /* Never make frag if expect extra pass. */
frag_align (temp, (int) temp_fill, 0);
demand_empty_rest_of_line ();
record_alignment (now_seg, temp);
{ "x", 0, 0, 0, 0 }
};
-#define OPTCOUNT (sizeof opt_table / sizeof opt_table[0])
+#define OPTCOUNT ((int) (sizeof opt_table / sizeof opt_table[0]))
/* The MRI OPT pseudo-op. */
if (on)
listing |= LISTING_SYMBOLS;
else
- listing &=~ LISTING_SYMBOLS;
+ listing &= ~LISTING_SYMBOLS;
}
/* Handle the MRI REG pseudo-op. */
SKIP_WHITESPACE ();
s = input_line_pointer;
- while (isalnum ((unsigned char) *input_line_pointer)
+ while (ISALNUM (*input_line_pointer)
#ifdef REGISTER_PREFIX
|| *input_line_pointer == REGISTER_PREFIX
#endif
/* md_assemble expects the opcode to be in lower case. */
for (s = str; *s != ' ' && *s != '\0'; s++)
- {
- if (isupper ((unsigned char) *s))
- *s = tolower ((unsigned char) *s);
- }
+ *s = TOLOWER (*s);
md_assemble (str);
}
++input_line_pointer;
SKIP_WHITESPACE ();
- if (isupper (c1))
- c1 = tolower (c1);
- if (isupper (c2))
- c2 = tolower (c2);
+ c1 = TOLOWER (c1);
+ c2 = TOLOWER (c2);
*pcc = (c1 << 8) | c2;
/* Look ahead for AND or OR or end of line. */
for (s = input_line_pointer; *s != '\0'; ++s)
{
- if ((strncasecmp (s, "AND", 3) == 0
- && (s[3] == '.' || ! is_part_of_name (s[3])))
- || (strncasecmp (s, "OR", 2) == 0
- && (s[2] == '.' || ! is_part_of_name (s[2]))))
+ /* We must make sure we don't misinterpret AND/OR at the end of labels!
+ if d0 <eq> #FOOAND and d1 <ne> #BAROR then
+ ^^^ ^^ */
+ if ((s == input_line_pointer
+ || *(s-1) == ' '
+ || *(s-1) == '\t')
+ && ((strncasecmp (s, "AND", 3) == 0
+ && (s[3] == '.' || ! is_part_of_name (s[3])))
+ || (strncasecmp (s, "OR", 2) == 0
+ && (s[2] == '.' || ! is_part_of_name (s[2])))))
break;
}
{
case MCC ('h', 'i'): return MCC ('c', 's');
case MCC ('l', 's'): return MCC ('c', 'c');
+ /* <HS> is an alias for <CC> */
+ case MCC ('h', 's'):
case MCC ('c', 'c'): return MCC ('l', 's');
+ /* <LO> is an alias for <CS> */
+ case MCC ('l', 'o'):
case MCC ('c', 's'): return MCC ('h', 'i');
case MCC ('p', 'l'): return MCC ('m', 'i');
case MCC ('m', 'i'): return MCC ('p', 'l');
case MCC ('l', 't'): return MCC ('g', 't');
case MCC ('g', 't'): return MCC ('l', 't');
case MCC ('l', 'e'): return MCC ('g', 'e');
+ /* issue a warning for conditions we can not swap */
+ case MCC ('n', 'e'): return MCC ('n', 'e'); // no problem here
+ case MCC ('e', 'q'): return MCC ('e', 'q'); // also no problem
+ case MCC ('v', 'c'):
+ case MCC ('v', 's'):
+ default :
+ as_warn (_("Condition <%c%c> in structured control directive can not be encoded correctly"),
+ (char) (cc >> 8), (char) (cc));
+ break;
}
return cc;
}
{
case MCC ('h', 'i'): return MCC ('l', 's');
case MCC ('l', 's'): return MCC ('h', 'i');
+ /* <HS> is an alias for <CC> */
+ case MCC ('h', 's'): return MCC ('l', 'o');
case MCC ('c', 'c'): return MCC ('c', 's');
+ /* <LO> is an alias for <CS> */
+ case MCC ('l', 'o'): return MCC ('h', 's');
case MCC ('c', 's'): return MCC ('c', 'c');
case MCC ('n', 'e'): return MCC ('e', 'q');
case MCC ('e', 'q'): return MCC ('n', 'e');
{
char *temp;
- cc = swap_mri_condition (cc);
+ /* Correct conditional handling:
+ if #1 <lt> d0 then ;means if (1 < d0)
+ ...
+ endi
+
+ should assemble to:
+
+ cmp #1,d0 if we do *not* swap the operands
+ bgt true we need the swapped condition!
+ ble false
+ true:
+ ...
+ false:
+ */
temp = leftstart;
leftstart = rightstart;
rightstart = temp;
leftstop = rightstop;
rightstop = temp;
}
+ else
+ {
+ cc = swap_mri_condition (cc);
+ }
}
if (truelab == NULL)
cc = reverse_mri_condition (cc);
truelab = falselab;
}
-
+
if (leftstart != NULL)
{
buf = (char *) xmalloc (20
*s++ = 'm';
*s++ = 'p';
if (qual != '\0')
- *s++ = qual;
+ *s++ = TOLOWER (qual);
*s++ = ' ';
memcpy (s, leftstart, leftstop - leftstart);
s += leftstop - leftstart;
mri_assemble (buf);
free (buf);
}
-
+
buf = (char *) xmalloc (20 + strlen (truelab));
s = buf;
*s++ = 'b';
*s++ = cc >> 8;
*s++ = cc & 0xff;
if (extent != '\0')
- *s++ = extent;
+ *s++ = TOLOWER (extent);
*s++ = ' ';
strcpy (s, truelab);
mri_assemble (buf);
/* A structured control directive must end with THEN with an
optional qualifier. */
s = input_line_pointer;
- while (! is_end_of_line[(unsigned char) *s]
- && (! flag_mri || *s != '*'))
+ /* We only accept '*' as introduction of comments if preceded by white space
+ or at first column of a line (I think this can't actually happen here?)
+ This is important when assembling:
+ if d0 <ne> 12(a0,d0*2) then
+ if d0 <ne> #CONST*20 then */
+ while ( ! ( is_end_of_line[(unsigned char) *s]
+ || ( flag_mri
+ && *s == '*'
+ && ( s == input_line_pointer
+ || *(s-1) == ' '
+ || *(s-1) == '\t'))))
++s;
--s;
while (s > input_line_pointer && (*s == ' ' || *s == '\t'))
mri_control_stack->else_seen = 1;
buf = (char *) xmalloc (20 + strlen (mri_control_stack->bottom));
- q[0] = qual;
+ q[0] = TOLOWER (qual);
q[1] = '\0';
sprintf (buf, "bra%s %s", q, mri_control_stack->bottom);
mri_assemble (buf);
}
buf = (char *) xmalloc (20 + strlen (n->bottom));
- ex[0] = extent;
+ ex[0] = TOLOWER (extent);
ex[1] = '\0';
sprintf (buf, "bra%s %s", ex, n->bottom);
mri_assemble (buf);
}
buf = (char *) xmalloc (20 + strlen (n->next));
- ex[0] = extent;
+ ex[0] = TOLOWER (extent);
ex[1] = '\0';
sprintf (buf, "bra%s %s", ex, n->next);
mri_assemble (buf);
*s++ = 'v';
*s++ = 'e';
if (qual != '\0')
- *s++ = qual;
+ *s++ = TOLOWER (qual);
*s++ = ' ';
memcpy (s, initstart, initstop - initstart);
s += initstop - initstart;
*s++ = 'm';
*s++ = 'p';
if (qual != '\0')
- *s++ = qual;
+ *s++ = TOLOWER (qual);
*s++ = ' ';
memcpy (s, endstart, endstop - endstart);
s += endstop - endstart;
mri_assemble (buf);
/* bcc bottom */
- ex[0] = extent;
+ ex[0] = TOLOWER (extent);
ex[1] = '\0';
if (up)
sprintf (buf, "blt%s %s", ex, n->bottom);
strcpy (s, "sub");
s += 3;
if (qual != '\0')
- *s++ = qual;
+ *s++ = TOLOWER (qual);
*s++ = ' ';
memcpy (s, bystart, bystop - bystart);
s += bystop - bystart;
struct mri_control_info *n;
s = input_line_pointer;
- while (! is_end_of_line[(unsigned char) *s]
- && (! flag_mri || *s != '*'))
+ /* We only accept '*' as introduction of comments if preceded by white space
+ or at first column of a line (I think this can't actually happen here?)
+ This is important when assembling:
+ while d0 <ne> 12(a0,d0*2) do
+ while d0 <ne> #CONST*20 do */
+ while (! (is_end_of_line[(unsigned char) *s]
+ || (flag_mri
+ && *s == '*'
+ && (s == input_line_pointer
+ || *(s-1) == ' '
+ || *(s-1) == '\t'))))
s++;
--s;
while (*s == ' ' || *s == '\t')
*
* -pic Indicates PIC.
* -k Indicates PIC. (Sun 3 only.)
+ * --pcrel Never turn PC-relative branches into absolute jumps.
*
* --bitwise-or
* Permit `|' to be used in expressions.
*/
#ifdef OBJ_ELF
-CONST char *md_shortopts = "lSA:m:kQ:V";
+const char *md_shortopts = "lSA:m:kQ:V";
#else
-CONST char *md_shortopts = "lSA:m:k";
+const char *md_shortopts = "lSA:m:k";
#endif
struct option md_longopts[] = {
{"disp-size-default-16", no_argument, NULL, OPTION_DISP_SIZE_DEFAULT_16},
#define OPTION_DISP_SIZE_DEFAULT_32 (OPTION_MD_BASE + 6)
{"disp-size-default-32", no_argument, NULL, OPTION_DISP_SIZE_DEFAULT_32},
+#define OPTION_PCREL (OPTION_MD_BASE + 7)
+ {"pcrel", no_argument, NULL, OPTION_PCREL},
{NULL, no_argument, NULL, 0}
};
-size_t md_longopts_size = sizeof(md_longopts);
+size_t md_longopts_size = sizeof (md_longopts);
int
md_parse_option (c, arg)
flag_long_jumps = 1;
break;
+ case OPTION_PCREL: /* --pcrel means never turn PC-relative
+ branches into absolute jumps. */
+ flag_keep_pcrel = 1;
+ break;
+
case 'A':
if (*arg == 'm')
- arg++;
+ arg++;
/* intentional fall-through */
case 'm':
md_show_usage (stream)
FILE *stream;
{
- fprintf(stream, _("\
+ const char *default_cpu = TARGET_CPU;
+ int i;
+ unsigned int default_arch;
+
+ /* Get the canonical name for the default target CPU. */
+ if (*default_cpu == 'm')
+ default_cpu++;
+ for (i = 0; i < n_archs; i++)
+ {
+ if (strcasecmp (default_cpu, archs[i].name) == 0)
+ {
+ default_arch = archs[i].arch;
+ for (i = 0; i < n_archs; i++)
+ {
+ if (archs[i].arch == default_arch
+ && !archs[i].alias)
+ {
+ default_cpu = archs[i].name;
+ break;
+ }
+ }
+ }
+ }
+
+ fprintf (stream, _("\
680X0 options:\n\
-l use 1 word for refs to undefined symbols [default 2]\n\
--m68000 | -m68008 | -m68010 | -m68020 | -m68030 | -m68040 | -m68060\n\
- | -m68302 | -m68331 | -m68332 | -m68333 | -m68340 | -m68360\n\
- | -mcpu32 | -m5200\n\
- specify variant of 680X0 architecture [default 68020]\n\
+-m68000 | -m68008 | -m68010 | -m68020 | -m68030 | -m68040 | -m68060 |\n\
+-m68302 | -m68331 | -m68332 | -m68333 | -m68340 | -m68360 | -mcpu32 |\n\
+-m5200 | -m5202 | -m5204 | -m5206 | -m5206e | -m5307 | -m5407\n\
+ specify variant of 680X0 architecture [default %s]\n\
-m68881 | -m68882 | -mno-68881 | -mno-68882\n\
target has/lacks floating-point coprocessor\n\
- [default yes for 68020, 68030, and cpu32]\n"));
- fprintf(stream, _("\
+ [default yes for 68020, 68030, and cpu32]\n"),
+ default_cpu);
+ fprintf (stream, _("\
-m68851 | -mno-68851\n\
target has/lacks memory-management unit coprocessor\n\
[default yes for 68020 and up]\n\
-pic, -k generate position independent code\n\
-S turn jbsr into jsr\n\
+--pcrel never turn PC-relative branches into absolute jumps\n\
--register-prefix-optional\n\
recognize register names without prefix character\n\
--bitwise-or do not treat `|' as a comment character\n"));
/* We have no need to default values of symbols. */
-/* ARGSUSED */
symbolS *
md_undefined_symbol (name)
char *name ATTRIBUTE_UNUSED;
/* Exactly what point is a PC-relative offset relative TO?
On the 68k, it is relative to the address of the first extension
word. The difference between the addresses of the offset and the
- first extension word is stored in fx_pcrel_adjust. */
+ first extension word is stored in fx_pcrel_adjust. */
long
md_pcrel_from (fixP)
fixS *fixP;
{
int adjust;
- /* Because fx_pcrel_adjust is a char, and may be unsigned, we store
- -1 as 64. */
- adjust = fixP->fx_pcrel_adjust;
+ /* Because fx_pcrel_adjust is a char, and may be unsigned, we explicitly
+ sign extend the value here. */
+ adjust = ((fixP->fx_pcrel_adjust & 0xff) ^ 0x80) - 0x80;
if (adjust == 64)
adjust = -1;
return fixP->fx_where + fixP->fx_frag->fr_address - adjust;
#ifndef BFD_ASSEMBLER
#ifdef OBJ_COFF
-/*ARGSUSED*/
void
tc_coff_symbol_emit_hook (ignore)
- symbolS *ignore;
+ symbolS *ignore ATTRIBUTE_UNUSED;
{
}
#endif
#endif
#ifdef OBJ_ELF
-void m68k_elf_final_processing()
+void
+m68k_elf_final_processing ()
{
- /* Set file-specific flags if this is a cpu32 processor */
- if (cpu_of_arch (current_architecture) & cpu32)
- elf_elfheader (stdoutput)->e_flags |= EF_CPU32;
+ /* Set file-specific flags if this is a cpu32 processor */
+ if (cpu_of_arch (current_architecture) & cpu32)
+ elf_elfheader (stdoutput)->e_flags |= EF_CPU32;
+ else if ((cpu_of_arch (current_architecture) & m68000up)
+ && !(cpu_of_arch (current_architecture) & m68020up))
+ elf_elfheader (stdoutput)->e_flags |= EF_M68000;
}
#endif
-/* end of tc-m68k.c */
projects / deliverable / binutils-gdb.git / blobdiff