/* tc-mips.c -- assemble code for a MIPS chip.
- Copyright (C) 1993-2016 Free Software Foundation, Inc.
+ Copyright (C) 1993-2018 Free Software Foundation, Inc.
Contributed by the OSF and Ralph Campbell.
Written by Keith Knowles and Ralph Campbell, working independently.
Modified for ECOFF and R4000 support by Ian Lance Taylor of Cygnus
efficient expansion. */
static int mips_relax_branch;
+
+/* TRUE if checks are suppressed for invalid branches between ISA modes.
+ Needed for broken assembly produced by some GCC versions and some
+ sloppy code out there, where branches to data labels are present. */
+static bfd_boolean mips_ignore_branch_isa;
\f
/* The expansion of many macros depends on the type of symbol that
they refer to. For example, when generating position-dependent code,
can be extracted using RELAX_FIRST() and RELAX_SECOND(). In addition,
the subtype has the following flags:
+ RELAX_PIC
+ Set if generating PIC code.
+
RELAX_USE_SECOND
Set if it has been decided that we should use the second
sequence instead of the first.
The code and fixups for the unwanted alternative are discarded
by md_convert_frag. */
-#define RELAX_ENCODE(FIRST, SECOND) (((FIRST) << 8) | (SECOND))
+#define RELAX_ENCODE(FIRST, SECOND, PIC) \
+ (((FIRST) << 8) | (SECOND) | ((PIC) ? 0x10000 : 0))
#define RELAX_FIRST(X) (((X) >> 8) & 0xff)
#define RELAX_SECOND(X) ((X) & 0xff)
-#define RELAX_USE_SECOND 0x10000
-#define RELAX_SECOND_LONGER 0x20000
-#define RELAX_NOMACRO 0x40000
-#define RELAX_DELAY_SLOT 0x80000
-#define RELAX_DELAY_SLOT_16BIT 0x100000
-#define RELAX_DELAY_SLOT_SIZE_FIRST 0x200000
-#define RELAX_DELAY_SLOT_SIZE_SECOND 0x400000
+#define RELAX_PIC(X) (((X) & 0x10000) != 0)
+#define RELAX_USE_SECOND 0x20000
+#define RELAX_SECOND_LONGER 0x40000
+#define RELAX_NOMACRO 0x80000
+#define RELAX_DELAY_SLOT 0x100000
+#define RELAX_DELAY_SLOT_16BIT 0x200000
+#define RELAX_DELAY_SLOT_SIZE_FIRST 0x400000
+#define RELAX_DELAY_SLOT_SIZE_SECOND 0x800000
/* Branch without likely bit. If label is out of range, we turn:
but it's not clear that it would actually improve performance. */
-#define RELAX_BRANCH_ENCODE(at, uncond, likely, link, toofar) \
+#define RELAX_BRANCH_ENCODE(at, pic, \
+ uncond, likely, link, toofar) \
((relax_substateT) \
(0xc0000000 \
| ((at) & 0x1f) \
- | ((toofar) ? 0x20 : 0) \
- | ((link) ? 0x40 : 0) \
- | ((likely) ? 0x80 : 0) \
- | ((uncond) ? 0x100 : 0)))
+ | ((pic) ? 0x20 : 0) \
+ | ((toofar) ? 0x40 : 0) \
+ | ((link) ? 0x80 : 0) \
+ | ((likely) ? 0x100 : 0) \
+ | ((uncond) ? 0x200 : 0)))
#define RELAX_BRANCH_P(i) (((i) & 0xf0000000) == 0xc0000000)
-#define RELAX_BRANCH_UNCOND(i) (((i) & 0x100) != 0)
-#define RELAX_BRANCH_LIKELY(i) (((i) & 0x80) != 0)
-#define RELAX_BRANCH_LINK(i) (((i) & 0x40) != 0)
-#define RELAX_BRANCH_TOOFAR(i) (((i) & 0x20) != 0)
+#define RELAX_BRANCH_UNCOND(i) (((i) & 0x200) != 0)
+#define RELAX_BRANCH_LIKELY(i) (((i) & 0x100) != 0)
+#define RELAX_BRANCH_LINK(i) (((i) & 0x80) != 0)
+#define RELAX_BRANCH_TOOFAR(i) (((i) & 0x40) != 0)
+#define RELAX_BRANCH_PIC(i) (((i) & 0x20) != 0)
#define RELAX_BRANCH_AT(i) ((i) & 0x1f)
/* For mips16 code, we use an entirely different form of relaxation.
store whether this is known to be a branch to a different section,
whether we have tried to relax this frag yet, and whether we have
ever extended a PC relative fragment because of a shift count. */
-#define RELAX_MIPS16_ENCODE(type, small, ext, dslot, jal_dslot) \
+#define RELAX_MIPS16_ENCODE(type, e2, pic, sym32, nomacro, \
+ small, ext, \
+ dslot, jal_dslot) \
(0x80000000 \
| ((type) & 0xff) \
- | ((small) ? 0x100 : 0) \
- | ((ext) ? 0x200 : 0) \
- | ((dslot) ? 0x400 : 0) \
- | ((jal_dslot) ? 0x800 : 0))
+ | ((e2) ? 0x100 : 0) \
+ | ((pic) ? 0x200 : 0) \
+ | ((sym32) ? 0x400 : 0) \
+ | ((nomacro) ? 0x800 : 0) \
+ | ((small) ? 0x1000 : 0) \
+ | ((ext) ? 0x2000 : 0) \
+ | ((dslot) ? 0x4000 : 0) \
+ | ((jal_dslot) ? 0x8000 : 0))
+
#define RELAX_MIPS16_P(i) (((i) & 0xc0000000) == 0x80000000)
#define RELAX_MIPS16_TYPE(i) ((i) & 0xff)
-#define RELAX_MIPS16_USER_SMALL(i) (((i) & 0x100) != 0)
-#define RELAX_MIPS16_USER_EXT(i) (((i) & 0x200) != 0)
-#define RELAX_MIPS16_DSLOT(i) (((i) & 0x400) != 0)
-#define RELAX_MIPS16_JAL_DSLOT(i) (((i) & 0x800) != 0)
-#define RELAX_MIPS16_EXTENDED(i) (((i) & 0x1000) != 0)
-#define RELAX_MIPS16_MARK_EXTENDED(i) ((i) | 0x1000)
-#define RELAX_MIPS16_CLEAR_EXTENDED(i) ((i) &~ 0x1000)
-#define RELAX_MIPS16_LONG_BRANCH(i) (((i) & 0x2000) != 0)
-#define RELAX_MIPS16_MARK_LONG_BRANCH(i) ((i) | 0x2000)
-#define RELAX_MIPS16_CLEAR_LONG_BRANCH(i) ((i) &~ 0x2000)
+#define RELAX_MIPS16_E2(i) (((i) & 0x100) != 0)
+#define RELAX_MIPS16_PIC(i) (((i) & 0x200) != 0)
+#define RELAX_MIPS16_SYM32(i) (((i) & 0x400) != 0)
+#define RELAX_MIPS16_NOMACRO(i) (((i) & 0x800) != 0)
+#define RELAX_MIPS16_USER_SMALL(i) (((i) & 0x1000) != 0)
+#define RELAX_MIPS16_USER_EXT(i) (((i) & 0x2000) != 0)
+#define RELAX_MIPS16_DSLOT(i) (((i) & 0x4000) != 0)
+#define RELAX_MIPS16_JAL_DSLOT(i) (((i) & 0x8000) != 0)
+
+#define RELAX_MIPS16_EXTENDED(i) (((i) & 0x10000) != 0)
+#define RELAX_MIPS16_MARK_EXTENDED(i) ((i) | 0x10000)
+#define RELAX_MIPS16_CLEAR_EXTENDED(i) ((i) & ~0x10000)
+#define RELAX_MIPS16_ALWAYS_EXTENDED(i) (((i) & 0x20000) != 0)
+#define RELAX_MIPS16_MARK_ALWAYS_EXTENDED(i) ((i) | 0x20000)
+#define RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED(i) ((i) & ~0x20000)
+#define RELAX_MIPS16_MACRO(i) (((i) & 0x40000) != 0)
+#define RELAX_MIPS16_MARK_MACRO(i) ((i) | 0x40000)
+#define RELAX_MIPS16_CLEAR_MACRO(i) ((i) & ~0x40000)
/* For microMIPS code, we use relaxation similar to one we use for
MIPS16 code. Some instructions that take immediate values support
The information we store for this type of relaxation is the argument
code found in the opcode file for this relocation, the register
- selected as the assembler temporary, whether the branch is
- unconditional, whether it is compact, whether it stores the link
- address implicitly in $ra, whether relaxation of out-of-range 32-bit
- branches to a sequence of instructions is enabled, and whether the
- displacement of a branch is too large to fit as an immediate argument
- of a 16-bit and a 32-bit branch, respectively. */
-#define RELAX_MICROMIPS_ENCODE(type, at, uncond, compact, link, \
+ selected as the assembler temporary, whether in the 32-bit
+ instruction mode, whether the branch is unconditional, whether it is
+ compact, whether there is no delay-slot instruction available to fill
+ in, whether it stores the link address implicitly in $ra, whether
+ relaxation of out-of-range 32-bit branches to a sequence of
+ instructions is enabled, and whether the displacement of a branch is
+ too large to fit as an immediate argument of a 16-bit and a 32-bit
+ branch, respectively. */
+#define RELAX_MICROMIPS_ENCODE(type, at, insn32, pic, \
+ uncond, compact, link, nods, \
relax32, toofar16, toofar32) \
(0x40000000 \
| ((type) & 0xff) \
| (((at) & 0x1f) << 8) \
- | ((uncond) ? 0x2000 : 0) \
- | ((compact) ? 0x4000 : 0) \
- | ((link) ? 0x8000 : 0) \
- | ((relax32) ? 0x10000 : 0) \
- | ((toofar16) ? 0x20000 : 0) \
- | ((toofar32) ? 0x40000 : 0))
+ | ((insn32) ? 0x2000 : 0) \
+ | ((pic) ? 0x4000 : 0) \
+ | ((uncond) ? 0x8000 : 0) \
+ | ((compact) ? 0x10000 : 0) \
+ | ((link) ? 0x20000 : 0) \
+ | ((nods) ? 0x40000 : 0) \
+ | ((relax32) ? 0x80000 : 0) \
+ | ((toofar16) ? 0x100000 : 0) \
+ | ((toofar32) ? 0x200000 : 0))
#define RELAX_MICROMIPS_P(i) (((i) & 0xc0000000) == 0x40000000)
#define RELAX_MICROMIPS_TYPE(i) ((i) & 0xff)
#define RELAX_MICROMIPS_AT(i) (((i) >> 8) & 0x1f)
-#define RELAX_MICROMIPS_UNCOND(i) (((i) & 0x2000) != 0)
-#define RELAX_MICROMIPS_COMPACT(i) (((i) & 0x4000) != 0)
-#define RELAX_MICROMIPS_LINK(i) (((i) & 0x8000) != 0)
-#define RELAX_MICROMIPS_RELAX32(i) (((i) & 0x10000) != 0)
-
-#define RELAX_MICROMIPS_TOOFAR16(i) (((i) & 0x20000) != 0)
-#define RELAX_MICROMIPS_MARK_TOOFAR16(i) ((i) | 0x20000)
-#define RELAX_MICROMIPS_CLEAR_TOOFAR16(i) ((i) & ~0x20000)
-#define RELAX_MICROMIPS_TOOFAR32(i) (((i) & 0x40000) != 0)
-#define RELAX_MICROMIPS_MARK_TOOFAR32(i) ((i) | 0x40000)
-#define RELAX_MICROMIPS_CLEAR_TOOFAR32(i) ((i) & ~0x40000)
+#define RELAX_MICROMIPS_INSN32(i) (((i) & 0x2000) != 0)
+#define RELAX_MICROMIPS_PIC(i) (((i) & 0x4000) != 0)
+#define RELAX_MICROMIPS_UNCOND(i) (((i) & 0x8000) != 0)
+#define RELAX_MICROMIPS_COMPACT(i) (((i) & 0x10000) != 0)
+#define RELAX_MICROMIPS_LINK(i) (((i) & 0x20000) != 0)
+#define RELAX_MICROMIPS_NODS(i) (((i) & 0x40000) != 0)
+#define RELAX_MICROMIPS_RELAX32(i) (((i) & 0x80000) != 0)
+
+#define RELAX_MICROMIPS_TOOFAR16(i) (((i) & 0x100000) != 0)
+#define RELAX_MICROMIPS_MARK_TOOFAR16(i) ((i) | 0x100000)
+#define RELAX_MICROMIPS_CLEAR_TOOFAR16(i) ((i) & ~0x100000)
+#define RELAX_MICROMIPS_TOOFAR32(i) (((i) & 0x200000) != 0)
+#define RELAX_MICROMIPS_MARK_TOOFAR32(i) ((i) | 0x200000)
+#define RELAX_MICROMIPS_CLEAR_TOOFAR32(i) ((i) & ~0x200000)
/* Sign-extend 16-bit value X. */
#define SEXT_16BIT(X) ((((X) + 0x8000) & 0xffff) - 0x8000)
static void mips16_macro (struct mips_cl_insn * ip);
static void mips_ip (char *str, struct mips_cl_insn * ip);
static void mips16_ip (char *str, struct mips_cl_insn * ip);
+static unsigned long mips16_immed_extend (offsetT, unsigned int);
static void mips16_immed
(const char *, unsigned int, int, bfd_reloc_code_real_type, offsetT,
unsigned int, unsigned long *);
static void s_mips_weakext (int);
static void s_mips_file (int);
static void s_mips_loc (int);
-static bfd_boolean pic_need_relax (symbolS *, asection *);
+static bfd_boolean pic_need_relax (symbolS *);
static int relaxed_branch_length (fragS *, asection *, int);
static int relaxed_micromips_16bit_branch_length (fragS *, asection *, int);
static int relaxed_micromips_32bit_branch_length (fragS *, asection *, int);
OPTION_NO_MICROMIPS,
OPTION_MCU,
OPTION_NO_MCU,
- OPTION_COMPAT_ARCH_BASE,
+ OPTION_MIPS16E2,
+ OPTION_NO_MIPS16E2,
+ OPTION_CRC,
+ OPTION_NO_CRC,
OPTION_M4650,
OPTION_NO_M4650,
OPTION_M4010,
OPTION_GP64,
OPTION_RELAX_BRANCH,
OPTION_NO_RELAX_BRANCH,
+ OPTION_IGNORE_BRANCH_ISA,
+ OPTION_NO_IGNORE_BRANCH_ISA,
OPTION_INSN32,
OPTION_NO_INSN32,
OPTION_MSHARED,
OPTION_NAN,
OPTION_ODD_SPREG,
OPTION_NO_ODD_SPREG,
+ OPTION_GINV,
+ OPTION_NO_GINV,
+ OPTION_LOONGSON_MMI,
+ OPTION_NO_LOONGSON_MMI,
+ OPTION_LOONGSON_CAM,
+ OPTION_NO_LOONGSON_CAM,
OPTION_END_OF_ENUM
};
{"mno-msa", no_argument, NULL, OPTION_NO_MSA},
{"mxpa", no_argument, NULL, OPTION_XPA},
{"mno-xpa", no_argument, NULL, OPTION_NO_XPA},
+ {"mmips16e2", no_argument, NULL, OPTION_MIPS16E2},
+ {"mno-mips16e2", no_argument, NULL, OPTION_NO_MIPS16E2},
+ {"mcrc", no_argument, NULL, OPTION_CRC},
+ {"mno-crc", no_argument, NULL, OPTION_NO_CRC},
+ {"mginv", no_argument, NULL, OPTION_GINV},
+ {"mno-ginv", no_argument, NULL, OPTION_NO_GINV},
+ {"mloongson-mmi", no_argument, NULL, OPTION_LOONGSON_MMI},
+ {"mno-loongson-mmi", no_argument, NULL, OPTION_NO_LOONGSON_MMI},
+ {"mloongson-cam", no_argument, NULL, OPTION_LOONGSON_CAM},
+ {"mno-loongson-cam", no_argument, NULL, OPTION_NO_LOONGSON_CAM},
/* Old-style architecture options. Don't add more of these. */
{"m4650", no_argument, NULL, OPTION_M4650},
{"mgp64", no_argument, NULL, OPTION_GP64},
{"relax-branch", no_argument, NULL, OPTION_RELAX_BRANCH},
{"no-relax-branch", no_argument, NULL, OPTION_NO_RELAX_BRANCH},
+ {"mignore-branch-isa", no_argument, NULL, OPTION_IGNORE_BRANCH_ISA},
+ {"mno-ignore-branch-isa", no_argument, NULL, OPTION_NO_IGNORE_BRANCH_ISA},
{"minsn32", no_argument, NULL, OPTION_INSN32},
{"mno-insn32", no_argument, NULL, OPTION_NO_INSN32},
{"mshared", no_argument, NULL, OPTION_MSHARED},
{ "xpa", ASE_XPA, 0,
OPTION_XPA, OPTION_NO_XPA,
- 2, 2, -1, -1,
+ 2, 2, 2, 2,
+ -1 },
+
+ { "mips16e2", ASE_MIPS16E2, 0,
+ OPTION_MIPS16E2, OPTION_NO_MIPS16E2,
+ 2, 2, -1, -1,
+ 6 },
+
+ { "crc", ASE_CRC, ASE_CRC64,
+ OPTION_CRC, OPTION_NO_CRC,
+ 6, 6, -1, -1,
+ -1 },
+
+ { "ginv", ASE_GINV, 0,
+ OPTION_GINV, OPTION_NO_GINV,
+ 6, 6, 6, 6,
+ -1 },
+
+ { "loongson-mmi", ASE_LOONGSON_MMI, 0,
+ OPTION_LOONGSON_MMI, OPTION_NO_LOONGSON_MMI,
+ 0, 0, -1, -1,
+ -1 },
+
+ { "loongson-cam", ASE_LOONGSON_CAM, 0,
+ OPTION_LOONGSON_CAM, OPTION_NO_LOONGSON_CAM,
+ 0, 0, -1, -1,
-1 },
};
mask = mips_ase_mask (ase->flags);
opts->ase &= ~mask;
+
+ /* Clear combination ASE flags, which need to be recalculated based on
+ updated regular ASE settings. */
+ opts->ase &= ~(ASE_MIPS16E2_MT | ASE_XPA_VIRT);
+
if (enabled_p)
opts->ase |= ase->flags;
+
+ /* The Virtualization ASE has eXtended Physical Addressing (XPA)
+ instructions which are only valid when both ASEs are enabled.
+ This sets the ASE_XPA_VIRT flag when both ASEs are present. */
+ if ((opts->ase & (ASE_XPA | ASE_VIRT)) == (ASE_XPA | ASE_VIRT))
+ {
+ opts->ase |= ASE_XPA_VIRT;
+ mask |= ASE_XPA_VIRT;
+ }
+ if ((opts->ase & (ASE_MIPS16E2 | ASE_MT)) == (ASE_MIPS16E2 | ASE_MT))
+ {
+ opts->ase |= ASE_MIPS16E2_MT;
+ mask |= ASE_MIPS16E2_MT;
+ }
+
return mask;
}
static inline unsigned int
micromips_insn_length (const struct mips_opcode *mo)
{
- return (mo->mask >> 16) == 0 ? 2 : 4;
+ return mips_opcode_32bit_p (mo) ? 4 : 2;
}
/* Return the length of MIPS16 instruction OPCODE. */
insn_insert_operand (struct mips_cl_insn *insn,
const struct mips_operand *operand, unsigned int uval)
{
- insn->insn_opcode = mips_insert_operand (operand, insn->insn_opcode, uval);
+ if (mips_opts.mips16
+ && operand->type == OP_INT && operand->lsb == 0
+ && mips_opcode_32bit_p (insn->insn_mo))
+ insn->insn_opcode |= mips16_immed_extend (uval, operand->size);
+ else
+ insn->insn_opcode = mips_insert_operand (operand, insn->insn_opcode, uval);
}
/* Extract the value of OPERAND from INSN. */
int fp_s, fp_d;
unsigned int i;
- if (ISA_HAS_64BIT_REGS (mips_opts.isa))
+ if (ISA_HAS_64BIT_REGS (isa))
for (i = 0; i < ARRAY_SIZE (mips_ases); i++)
if ((ase & mips_ases[i].flags) == mips_ases[i].flags)
ase |= mips_ases[i].flags64;
static bfd_boolean
is_opcode_valid_16 (const struct mips_opcode *mo)
{
- return opcode_is_member (mo, mips_opts.isa, 0, mips_opts.arch);
+ int isa = mips_opts.isa;
+ int ase = mips_opts.ase;
+ unsigned int i;
+
+ if (ISA_HAS_64BIT_REGS (isa))
+ for (i = 0; i < ARRAY_SIZE (mips_ases); i++)
+ if ((ase & mips_ases[i].flags) == mips_ases[i].flags)
+ ase |= mips_ases[i].flags64;
+
+ return opcode_is_member (mo, isa, ase, mips_opts.arch);
}
/* Return TRUE if the size of the microMIPS opcode MO matches one
- explicitly requested. Always TRUE in the standard MIPS mode. */
+ explicitly requested. Always TRUE in the standard MIPS mode.
+ Use is_size_valid_16 for MIPS16 opcodes. */
static bfd_boolean
is_size_valid (const struct mips_opcode *mo)
return forced_insn_length == micromips_insn_length (mo);
}
+/* Return TRUE if the size of the MIPS16 opcode MO matches one
+ explicitly requested. */
+
+static bfd_boolean
+is_size_valid_16 (const struct mips_opcode *mo)
+{
+ if (!forced_insn_length)
+ return TRUE;
+ if (mo->pinfo == INSN_MACRO)
+ return FALSE;
+ if (forced_insn_length == 2 && mips_opcode_32bit_p (mo))
+ return FALSE;
+ if (forced_insn_length == 4 && (mo->pinfo2 & INSN2_SHORT_ONLY))
+ return FALSE;
+ return TRUE;
+}
+
/* Return TRUE if the microMIPS opcode MO is valid for the delay slot
of the preceding instruction. Always TRUE in the standard MIPS mode.
default:
if (!decode_operand)
- operand = decode_mips16_operand (*s, FALSE);
+ operand = decode_mips16_operand (*s, mips_opcode_32bit_p (opcode));
else
operand = decode_operand (s);
if (!operand && opcode->pinfo != INSN_MACRO)
}
gas_assert (opno < MAX_OPERANDS);
operands->operand[opno] = operand;
- if (operand && operand->type != OP_VU0_MATCH_SUFFIX)
+ if (!decode_operand && operand
+ && operand->type == OP_INT && operand->lsb == 0
+ && mips_opcode_32bit_p (opcode))
+ used_bits |= mips16_immed_extend (-1, operand->size);
+ else if (operand && operand->type != OP_VU0_MATCH_SUFFIX)
{
used_bits = mips_insert_operand (operand, used_bits, -1);
if (operand->type == OP_MDMX_IMM_REG)
used_bits &= ~(1 << (operand->lsb + 5));
if (operand->type == OP_ENTRY_EXIT_LIST)
used_bits &= ~(mask & 0x700);
+ /* interAptiv MR2 SAVE/RESTORE instructions have a discontiguous
+ operand field that cannot be fully described with LSB/SIZE. */
+ if (operand->type == OP_SAVE_RESTORE_LIST && operand->lsb == 6)
+ used_bits &= ~0x6000;
}
/* Skip prefix characters. */
if (decode_operand && (*s == '+' || *s == 'm' || *s == '-'))
validate_mips16_insn (const struct mips_opcode *opcode,
struct mips_operand_array *operands)
{
- if (opcode->args[0] == 'a' || opcode->args[0] == 'i')
- {
- /* In this case OPCODE defines the first 16 bits in a 32-bit jump
- instruction. Use TMP to describe the full instruction. */
- struct mips_opcode tmp;
+ unsigned long insn_bits = mips_opcode_32bit_p (opcode) ? 0xffffffff : 0xffff;
- tmp = *opcode;
- tmp.match <<= 16;
- tmp.mask <<= 16;
- return validate_mips_insn (&tmp, 0xffffffff, 0, operands);
- }
- return validate_mips_insn (opcode, 0xffff, 0, operands);
+ return validate_mips_insn (opcode, insn_bits, 0, operands);
}
/* The microMIPS version of validate_mips_insn. */
mips_move_labels (seg_info (now_seg)->label_list, TRUE);
}
+/* Duplicate the test for LINK_ONCE sections as in `adjust_reloc_syms'. */
+
static bfd_boolean
s_is_linkonce (symbolS *sym, segT from_seg)
{
{
mips_macro_warning.first_frag = frag_now;
frag_var (rs_machine_dependent, 0, 0,
- RELAX_ENCODE (mips_relax.sizes[0], mips_relax.sizes[1]),
+ RELAX_ENCODE (mips_relax.sizes[0], mips_relax.sizes[1],
+ mips_pic != NO_PIC),
mips_relax.symbol, 0, (char *) mips_relax.first_fixup);
memset (&mips_relax.sizes, 0, sizeof (mips_relax.sizes));
case OP_IMM_INDEX:
abort ();
+ case OP_REG28:
+ return 1 << 28;
+
case OP_REG:
case OP_OPTIONAL_REG:
{
unsigned int last_op_int;
/* If true, match routines should assume that no later instruction
- alternative matches and should therefore be as accomodating as
+ alternative matches and should therefore be as accommodating as
possible. Match routines should not report errors if something
is only invalid for !LAX_MATCH. */
bfd_boolean lax_match;
}
/* Try to get a constant expression from the next tokens in ARG. Consume
- the tokens and return return true on success, storing the constant value
- in *VALUE. Use FALLBACK as the value if the match succeeded with an
- error. */
+ the tokens and return true on success, storing the constant value
+ in *VALUE. */
static bfd_boolean
match_const_int (struct mips_arg_info *arg, offsetT *value)
*value = ex.X_add_number;
else
{
- match_not_constant (arg);
+ if (r[0] == BFD_RELOC_UNUSED && ex.X_op == O_big)
+ match_out_of_range (arg);
+ else
+ match_not_constant (arg);
return FALSE;
}
return TRUE;
if (!match_expression (arg, &offset_expr, offset_reloc))
return FALSE;
+ if (offset_expr.X_op == O_big)
+ {
+ match_out_of_range (arg);
+ return FALSE;
+ }
+
if (offset_reloc[0] != BFD_RELOC_UNUSED)
- /* Relocation operators were used. Accept the arguent and
+ /* Relocation operators were used. Accept the argument and
leave the relocation value in offset_expr and offset_relocs
for the caller to process. */
return TRUE;
/* Accept non-constant operands if no later alternative matches,
leaving it for the caller to process. */
if (!arg->lax_match)
- return FALSE;
+ {
+ match_not_constant (arg);
+ return FALSE;
+ }
offset_reloc[0] = BFD_RELOC_LO16;
return TRUE;
}
{
max_val = ((1 << operand_base->size) - 1) << operand->shift;
if (!arg->lax_match && sval <= max_val)
- return FALSE;
+ {
+ match_out_of_range (arg);
+ return FALSE;
+ }
}
}
else
return TRUE;
}
+/* Encode regular MIPS SAVE/RESTORE instruction operands according to
+ the argument register mask AMASK, the number of static registers
+ saved NSREG, the $ra, $s0 and $s1 register specifiers RA, S0 and S1
+ respectively, and the frame size FRAME_SIZE. */
+
+static unsigned int
+mips_encode_save_restore (unsigned int amask, unsigned int nsreg,
+ unsigned int ra, unsigned int s0, unsigned int s1,
+ unsigned int frame_size)
+{
+ return ((nsreg << 23) | ((frame_size & 0xf0) << 15) | (amask << 15)
+ | (ra << 12) | (s0 << 11) | (s1 << 10) | ((frame_size & 0xf) << 6));
+}
+
+/* Encode MIPS16 SAVE/RESTORE instruction operands according to the
+ argument register mask AMASK, the number of static registers saved
+ NSREG, the $ra, $s0 and $s1 register specifiers RA, S0 and S1
+ respectively, and the frame size FRAME_SIZE. */
+
+static unsigned int
+mips16_encode_save_restore (unsigned int amask, unsigned int nsreg,
+ unsigned int ra, unsigned int s0, unsigned int s1,
+ unsigned int frame_size)
+{
+ unsigned int args;
+
+ args = (ra << 6) | (s0 << 5) | (s1 << 4) | (frame_size & 0xf);
+ if (nsreg || amask || frame_size == 0 || frame_size > 16)
+ args |= (MIPS16_EXTEND | (nsreg << 24) | (amask << 16)
+ | ((frame_size & 0xf0) << 16));
+ return args;
+}
+
/* OP_SAVE_RESTORE_LIST matcher. */
static bfd_boolean
{
unsigned int opcode, args, statics, sregs;
unsigned int num_frame_sizes, num_args, num_statics, num_sregs;
+ unsigned int arg_mask, ra, s0, s1;
offsetT frame_size;
opcode = arg->insn->insn_opcode;
args = 0;
statics = 0;
sregs = 0;
+ ra = 0;
+ s0 = 0;
+ s1 = 0;
do
{
unsigned int regno1, regno2;
sregs |= 1 << 8;
else if (regno1 == 31)
/* Add $ra to insn. */
- opcode |= 0x40;
+ ra = 1;
else
return FALSE;
regno1 += 1;
return FALSE;
else if (args == 0xf)
/* All $a0-$a3 are args. */
- opcode |= MIPS16_ALL_ARGS << 16;
+ arg_mask = MIPS_SVRS_ALL_ARGS;
else if (statics == 0xf)
/* All $a0-$a3 are statics. */
- opcode |= MIPS16_ALL_STATICS << 16;
+ arg_mask = MIPS_SVRS_ALL_STATICS;
else
{
/* Count arg registers. */
return FALSE;
/* Encode args/statics. */
- opcode |= ((num_args << 2) | num_statics) << 16;
+ arg_mask = (num_args << 2) | num_statics;
}
/* Encode $s0/$s1. */
if (sregs & (1 << 0)) /* $s0 */
- opcode |= 0x20;
+ s0 = 1;
if (sregs & (1 << 1)) /* $s1 */
- opcode |= 0x10;
+ s1 = 1;
sregs >>= 2;
/* Encode $s2-$s8. */
}
if (sregs != 0)
return FALSE;
- opcode |= num_sregs << 24;
/* Encode frame size. */
if (num_frame_sizes == 0)
set_insn_error (arg->argnum, _("invalid frame size"));
return FALSE;
}
- if (frame_size != 128 || (opcode >> 16) != 0)
- {
- frame_size /= 8;
- opcode |= (((frame_size & 0xf0) << 16)
- | (frame_size & 0x0f));
- }
+ frame_size /= 8;
/* Finally build the instruction. */
- if ((opcode >> 16) != 0 || frame_size == 0)
- opcode |= MIPS16_EXTEND;
+ if (mips_opts.mips16)
+ opcode |= mips16_encode_save_restore (arg_mask, num_sregs, ra, s0, s1,
+ frame_size);
+ else if (!mips_opts.micromips)
+ opcode |= mips_encode_save_restore (arg_mask, num_sregs, ra, s0, s1,
+ frame_size);
+ else
+ abort ();
+
arg->insn->insn_opcode = opcode;
return TRUE;
}
return FALSE;
}
+/* OP_REG28 matcher. */
+
+static bfd_boolean
+match_reg28_operand (struct mips_arg_info *arg)
+{
+ unsigned int regno;
+
+ if (arg->token->type == OT_REG
+ && match_regno (arg, OP_REG_GP, arg->token->u.regno, ®no)
+ && regno == GP)
+ {
+ ++arg->token;
+ return TRUE;
+ }
+ return FALSE;
+}
+
/* OP_NON_ZERO_REG matcher. */
static bfd_boolean
return match_reg (arg, OP_REG_GP, ®no) && regno == other_regno;
}
-/* Read a floating-point constant from S for LI.S or LI.D. LENGTH is
- the length of the value in bytes (4 for float, 8 for double) and
- USING_GPRS says whether the destination is a GPR rather than an FPR.
+/* Try to match a floating-point constant from ARG for LI.S or LI.D.
+ LENGTH is the length of the value in bytes (4 for float, 8 for double)
+ and USING_GPRS says whether the destination is a GPR rather than an FPR.
Return the constant in IMM and OFFSET as follows:
return TRUE;
}
-/* S is the text seen for ARG. Match it against OPERAND. Return the end
- of the argument text if the match is successful, otherwise return null. */
+/* Try to match a token from ARG against OPERAND. Consume the token
+ and return true on success, otherwise return false. */
static bfd_boolean
match_operand (struct mips_arg_info *arg,
case OP_PC:
return match_pc_operand (arg);
+ case OP_REG28:
+ return match_reg28_operand (arg);
+
case OP_VU0_SUFFIX:
return match_vu0_suffix_operand (arg, operand, FALSE);
break;
}
}
- if (rv == FALSE)
+ if (!rv)
{
/* Insert nop after branch to fix short loop. */
return FALSE;
&& gpr_read_mask (ip) != 0)
return APPEND_ADD_COMPACT;
+ if (mips_opts.micromips
+ && ((ip->insn_opcode & 0xffe0) == 0x4580
+ || (!forced_insn_length
+ && ((ip->insn_opcode & 0xfc00) == 0xcc00
+ || (ip->insn_opcode & 0xdc00) == 0x8c00))
+ || (ip->insn_opcode & 0xdfe00000) == 0x94000000
+ || (ip->insn_opcode & 0xdc1f0000) == 0x94000000))
+ return APPEND_ADD_COMPACT;
+
return APPEND_ADD_WITH_NOP;
}
return APPEND_ADD;
}
-/* IP is a MIPS16 instruction whose opcode we have just changed.
- Point IP->insn_mo to the new opcode's definition. */
+/* IP is an instruction whose opcode we have just changed, END points
+ to the end of the opcode table processed. Point IP->insn_mo to the
+ new opcode's definition. */
static void
-find_altered_mips16_opcode (struct mips_cl_insn *ip)
+find_altered_opcode (struct mips_cl_insn *ip, const struct mips_opcode *end)
{
- const struct mips_opcode *mo, *end;
+ const struct mips_opcode *mo;
- end = &mips16_opcodes[bfd_mips16_num_opcodes];
for (mo = ip->insn_mo; mo < end; mo++)
- if ((ip->insn_opcode & mo->mask) == mo->match)
+ if (mo->pinfo != INSN_MACRO
+ && (ip->insn_opcode & mo->mask) == mo->match)
{
ip->insn_mo = mo;
return;
abort ();
}
+/* IP is a MIPS16 instruction whose opcode we have just changed.
+ Point IP->insn_mo to the new opcode's definition. */
+
+static void
+find_altered_mips16_opcode (struct mips_cl_insn *ip)
+{
+ find_altered_opcode (ip, &mips16_opcodes[bfd_mips16_num_opcodes]);
+}
+
+/* IP is a microMIPS instruction whose opcode we have just changed.
+ Point IP->insn_mo to the new opcode's definition. */
+
+static void
+find_altered_micromips_opcode (struct mips_cl_insn *ip)
+{
+ find_altered_opcode (ip, µmips_opcodes[bfd_micromips_num_opcodes]);
+}
+
/* For microMIPS macros, we need to generate a local number label
as the target of branches. */
#define MICROMIPS_LABEL_CHAR '\037'
prev_pinfo2 = history[0].insn_mo->pinfo2;
pinfo = ip->insn_mo->pinfo;
+ /* Don't raise alarm about `nods' frags as they'll fill in the right
+ kind of nop in relaxation if required. */
if (mips_opts.micromips
&& !expansionp
+ && !(history[0].frag
+ && history[0].frag->fr_type == rs_machine_dependent
+ && RELAX_MICROMIPS_P (history[0].frag->fr_subtype)
+ && RELAX_MICROMIPS_NODS (history[0].frag->fr_subtype))
&& (((prev_pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0
&& micromips_insn_length (ip->insn_mo) != 2)
|| ((prev_pinfo2 & INSN2_BRANCH_DELAY_32BIT) != 0
: branch_likely_p (ip) ? 1
: 0)), 4,
RELAX_BRANCH_ENCODE
- (AT,
+ (AT, mips_pic != NO_PIC,
uncond_branch_p (ip),
branch_likely_p (ip),
pinfo & INSN_WRITE_GPR_31,
16-bit/32-bit instructions. */
&& !forced_insn_length)
{
- bfd_boolean relax16 = *reloc_type > BFD_RELOC_UNUSED;
+ bfd_boolean relax16 = (method != APPEND_ADD_COMPACT
+ && *reloc_type > BFD_RELOC_UNUSED);
int type = relax16 ? *reloc_type - BFD_RELOC_UNUSED : 0;
int uncond = uncond_branch_p (ip) ? -1 : 0;
- int compact = compact_branch_p (ip);
+ int compact = compact_branch_p (ip) || method == APPEND_ADD_COMPACT;
+ int nods = method == APPEND_ADD_WITH_NOP;
int al = pinfo & INSN_WRITE_GPR_31;
- int length32;
+ int length32 = nods ? 8 : 4;
gas_assert (address_expr != NULL);
gas_assert (!mips_relax.sequence);
relaxed_branch = TRUE;
- length32 = relaxed_micromips_32bit_branch_length (NULL, NULL, uncond);
- add_relaxed_insn (ip, relax32 ? length32 : 4, relax16 ? 2 : 4,
- RELAX_MICROMIPS_ENCODE (type, AT, uncond, compact, al,
+ if (nods)
+ method = APPEND_ADD;
+ if (relax32)
+ length32 = relaxed_micromips_32bit_branch_length (NULL, NULL, uncond);
+ add_relaxed_insn (ip, length32, relax16 ? 2 : 4,
+ RELAX_MICROMIPS_ENCODE (type, AT, mips_opts.insn32,
+ mips_pic != NO_PIC,
+ uncond, compact, al, nods,
relax32, 0, 0),
address_expr->X_add_symbol,
address_expr->X_add_number);
}
else if (mips_opts.mips16 && *reloc_type > BFD_RELOC_UNUSED)
{
+ bfd_boolean require_unextended;
+ bfd_boolean require_extended;
symbolS *symbol;
offsetT offset;
+ if (forced_insn_length != 0)
+ {
+ require_unextended = forced_insn_length == 2;
+ require_extended = forced_insn_length == 4;
+ }
+ else
+ {
+ require_unextended = (mips_opts.noautoextend
+ && !mips_opcode_32bit_p (ip->insn_mo));
+ require_extended = 0;
+ }
+
/* We need to set up a variant frag. */
gas_assert (address_expr != NULL);
/* Pass any `O_symbol' expression unchanged as an `expr_section'
else
{
symbol = make_expr_symbol (address_expr);
+ symbol_append (symbol, symbol_lastP, &symbol_rootP, &symbol_lastP);
offset = 0;
}
- add_relaxed_insn (ip, 4, 0,
+ add_relaxed_insn (ip, 12, 0,
RELAX_MIPS16_ENCODE
(*reloc_type - BFD_RELOC_UNUSED,
- forced_insn_length == 2, forced_insn_length == 4,
+ mips_opts.ase & ASE_MIPS16E2,
+ mips_pic != NO_PIC,
+ HAVE_32BIT_SYMBOLS,
+ mips_opts.warn_about_macros,
+ require_unextended, require_extended,
delayed_branch_p (&history[0]),
history[0].mips16_absolute_jump_p),
symbol, offset);
address_expr,
howto0 && howto0->pc_relative,
final_type[0]);
+ /* Record non-PIC mode in `fx_tcbit2' for `md_apply_fix'. */
+ ip->fixp[0]->fx_tcbit2 = mips_pic == NO_PIC;
/* Tag symbols that have a R_MIPS16_26 relocation against them. */
if (final_type[0] == BFD_RELOC_MIPS16_JMP && ip->fixp[0]->fx_addsy)
case APPEND_ADD_COMPACT:
/* Convert MIPS16 jr/jalr into a "compact" jump. */
- gas_assert (mips_opts.mips16);
- ip->insn_opcode |= 0x0080;
- find_altered_mips16_opcode (ip);
+ if (mips_opts.mips16)
+ {
+ ip->insn_opcode |= 0x0080;
+ find_altered_mips16_opcode (ip);
+ }
+ /* Convert microMIPS instructions. */
+ else if (mips_opts.micromips)
+ {
+ /* jr16->jrc */
+ if ((ip->insn_opcode & 0xffe0) == 0x4580)
+ ip->insn_opcode |= 0x0020;
+ /* b16->bc */
+ else if ((ip->insn_opcode & 0xfc00) == 0xcc00)
+ ip->insn_opcode = 0x40e00000;
+ /* beqz16->beqzc, bnez16->bnezc */
+ else if ((ip->insn_opcode & 0xdc00) == 0x8c00)
+ {
+ unsigned long regno;
+
+ regno = ip->insn_opcode >> MICROMIPSOP_SH_MD;
+ regno &= MICROMIPSOP_MASK_MD;
+ regno = micromips_to_32_reg_d_map[regno];
+ ip->insn_opcode = (((ip->insn_opcode << 9) & 0x00400000)
+ | (regno << MICROMIPSOP_SH_RS)
+ | 0x40a00000) ^ 0x00400000;
+ }
+ /* beqz->beqzc, bnez->bnezc */
+ else if ((ip->insn_opcode & 0xdfe00000) == 0x94000000)
+ ip->insn_opcode = ((ip->insn_opcode & 0x001f0000)
+ | ((ip->insn_opcode >> 7) & 0x00400000)
+ | 0x40a00000) ^ 0x00400000;
+ /* beq $0->beqzc, bne $0->bnezc */
+ else if ((ip->insn_opcode & 0xdc1f0000) == 0x94000000)
+ ip->insn_opcode = (((ip->insn_opcode >>
+ (MICROMIPSOP_SH_RT - MICROMIPSOP_SH_RS))
+ & (MICROMIPSOP_MASK_RS << MICROMIPSOP_SH_RS))
+ | ((ip->insn_opcode >> 7) & 0x00400000)
+ | 0x40a00000) ^ 0x00400000;
+ else
+ abort ();
+ find_altered_micromips_opcode (ip);
+ }
+ else
+ abort ();
install_insn (ip);
insert_into_history (0, 1, ip);
break;
const char *args;
const struct mips_operand *operand;
const struct mips_operand *ext_operand;
+ bfd_boolean pcrel = FALSE;
+ int required_insn_length;
struct mips_arg_info arg;
int relax_char;
+ if (forced_insn_length)
+ required_insn_length = forced_insn_length;
+ else if (mips_opts.noautoextend && !mips_opcode_32bit_p (opcode))
+ required_insn_length = 2;
+ else
+ required_insn_length = 0;
+
create_insn (insn, opcode);
imm_expr.X_op = O_absent;
offset_expr.X_op = O_absent;
}
else if (relax_char
&& offset_expr.X_op == O_constant
+ && !pcrel
&& calculate_reloc (*offset_reloc,
offset_expr.X_add_number,
&value))
{
mips16_immed (NULL, 0, relax_char, *offset_reloc, value,
- forced_insn_length, &insn->insn_opcode);
+ required_insn_length, &insn->insn_opcode);
offset_expr.X_op = O_absent;
*offset_reloc = BFD_RELOC_UNUSED;
}
else if (relax_char && *offset_reloc != BFD_RELOC_UNUSED)
{
- if (forced_insn_length == 2)
+ if (required_insn_length == 2)
set_insn_error (0, _("invalid unextended operand value"));
- forced_insn_length = 4;
- insn->insn_opcode |= MIPS16_EXTEND;
+ else if (!mips_opcode_32bit_p (opcode))
+ {
+ forced_insn_length = 4;
+ insn->insn_opcode |= MIPS16_EXTEND;
+ }
}
else if (relax_char)
*offset_reloc = (int) BFD_RELOC_UNUSED + relax_char;
case 'A':
case 'B':
case 'E':
+ case 'V':
+ case 'u':
relax_char = c;
break;
case 'a':
case 'i':
*offset_reloc = BFD_RELOC_MIPS16_JMP;
- insn->insn_opcode <<= 16;
break;
}
- operand = decode_mips16_operand (c, FALSE);
+ operand = decode_mips16_operand (c, mips_opcode_32bit_p (opcode));
if (!operand)
abort ();
- /* '6' is a special case. It is used for BREAK and SDBBP,
- whose operands are only meaningful to the software that decodes
- them. This means that there is no architectural reason why
- they cannot be prefixed by EXTEND, but in practice,
- exception handlers will only look at the instruction
- itself. We therefore allow '6' to be extended when
- disassembling but not when assembling. */
- if (operand->type != OP_PCREL && c != '6')
+ if (operand->type == OP_PCREL)
+ pcrel = TRUE;
+ else
{
ext_operand = decode_mips16_operand (c, TRUE);
if (operand != ext_operand)
continue;
}
- /* We need the OT_INTEGER check because some MIPS16
- immediate variants are listed before the register ones. */
- if (arg.token->type != OT_INTEGER
- || !match_expression (&arg, &offset_expr, offset_reloc))
+ if (!match_expression (&arg, &offset_expr, offset_reloc))
return FALSE;
/* '8' is used for SLTI(U) and has traditionally not
been allowed to take relocation operators. */
if (offset_reloc[0] != BFD_RELOC_UNUSED
&& (ext_operand->size != 16 || c == '8'))
- return FALSE;
+ {
+ match_not_constant (&arg);
+ return FALSE;
+ }
+
+ if (offset_expr.X_op == O_big)
+ {
+ match_out_of_range (&arg);
+ return FALSE;
+ }
relax_char = c;
continue;
{
const struct mips_opcode *opcode;
bfd_boolean seen_valid_for_isa;
+ bfd_boolean seen_valid_for_size;
/* Search for a match, ignoring alternatives that don't satisfy the
current ISA. There are no separate entries for extended forms so
we deal with forced_length later. */
seen_valid_for_isa = FALSE;
+ seen_valid_for_size = FALSE;
opcode = first;
do
{
if (is_opcode_valid_16 (opcode))
{
seen_valid_for_isa = TRUE;
- if (match_mips16_insn (insn, opcode, tokens))
- return TRUE;
+ if (is_size_valid_16 (opcode))
+ {
+ seen_valid_for_size = TRUE;
+ if (match_mips16_insn (insn, opcode, tokens))
+ return TRUE;
+ }
}
++opcode;
}
return TRUE;
}
+ /* Handle the case where we didn't try to match an instruction because
+ all the alternatives were of the wrong size. */
+ if (!seen_valid_for_size)
+ {
+ if (forced_insn_length == 2)
+ set_insn_error
+ (0, _("unrecognized unextended version of MIPS16 opcode"));
+ else
+ set_insn_error
+ (0, _("unrecognized extended version of MIPS16 opcode"));
+ return TRUE;
+ }
+
return FALSE;
}
memset (&mips_macro_warning.insns, 0, sizeof (mips_macro_warning.insns));
mips_macro_warning.delay_slot_p = (mips_opts.noreorder
&& delayed_branch_p (&history[0]));
- switch (history[0].insn_mo->pinfo2
- & (INSN2_BRANCH_DELAY_32BIT | INSN2_BRANCH_DELAY_16BIT))
- {
- case INSN2_BRANCH_DELAY_32BIT:
- mips_macro_warning.delay_slot_length = 4;
- break;
- case INSN2_BRANCH_DELAY_16BIT:
- mips_macro_warning.delay_slot_length = 2;
- break;
- default:
- mips_macro_warning.delay_slot_length = 0;
- break;
- }
+ if (history[0].frag
+ && history[0].frag->fr_type == rs_machine_dependent
+ && RELAX_MICROMIPS_P (history[0].frag->fr_subtype)
+ && RELAX_MICROMIPS_NODS (history[0].frag->fr_subtype))
+ mips_macro_warning.delay_slot_length = 0;
+ else
+ switch (history[0].insn_mo->pinfo2
+ & (INSN2_BRANCH_DELAY_32BIT | INSN2_BRANCH_DELAY_16BIT))
+ {
+ case INSN2_BRANCH_DELAY_32BIT:
+ mips_macro_warning.delay_slot_length = 4;
+ break;
+ case INSN2_BRANCH_DELAY_16BIT:
+ mips_macro_warning.delay_slot_length = 2;
+ break;
+ default:
+ mips_macro_warning.delay_slot_length = 0;
+ break;
+ }
mips_macro_warning.first_frag = NULL;
}
{
/* Search until we get a match for NAME. It is assumed here that
macros will never generate MDMX, MIPS-3D, or MT instructions.
- We try to match an instruction that fulfils the branch delay
+ We try to match an instruction that fulfills the branch delay
slot instruction length requirement (if any) of the previous
instruction. While doing this we record the first instruction
seen that matches all the other conditions and use it anyway
|| *r == BFD_RELOC_MIPS_HIGHER
|| *r == BFD_RELOC_HI16_S
|| *r == BFD_RELOC_LO16
- || *r == BFD_RELOC_MIPS_GOT_OFST);
+ || *r == BFD_RELOC_MIPS_GOT_OFST
+ || (mips_opts.micromips
+ && (*r == BFD_RELOC_16
+ || *r == BFD_RELOC_MIPS_GOT16
+ || *r == BFD_RELOC_MIPS_CALL16
+ || *r == BFD_RELOC_MIPS_GOT_HI16
+ || *r == BFD_RELOC_MIPS_GOT_LO16
+ || *r == BFD_RELOC_MIPS_CALL_HI16
+ || *r == BFD_RELOC_MIPS_CALL_LO16
+ || *r == BFD_RELOC_MIPS_SUB
+ || *r == BFD_RELOC_MIPS_GOT_PAGE
+ || *r == BFD_RELOC_MIPS_HIGHEST
+ || *r == BFD_RELOC_MIPS_GOT_DISP
+ || *r == BFD_RELOC_MIPS_TLS_GD
+ || *r == BFD_RELOC_MIPS_TLS_LDM
+ || *r == BFD_RELOC_MIPS_TLS_DTPREL_HI16
+ || *r == BFD_RELOC_MIPS_TLS_DTPREL_LO16
+ || *r == BFD_RELOC_MIPS_TLS_GOTTPREL
+ || *r == BFD_RELOC_MIPS_TLS_TPREL_HI16
+ || *r == BFD_RELOC_MIPS_TLS_TPREL_LO16)));
break;
case 'o':
case ')':
break;
- case '0':
+ case '.':
case 'S':
case 'P':
case 'R':
break;
case '<':
- case '>':
- case '4':
case '5':
+ case 'F':
case 'H':
case 'W':
case 'D':
LOCAL is the sum of a symbol and a 16-bit or 32-bit displacement.
The two alternatives are:
- Global symbol Local sybmol
+ Global symbol Local symbol
------------- ------------
lw DEST,%got(SYMBOL) lw DEST,%got(SYMBOL + OFFSET)
... ...
* optimizing code generation.
* One interesting optimization is when several store macros appear
* consecutively that would load AT with the upper half of the same address.
- * The ensuing load upper instructions are ommited. This implies some kind
+ * The ensuing load upper instructions are omitted. This implies some kind
* of global optimization. We currently only optimize within a single macro.
* For many of the load and store macros if the address is specified as a
* constant expression in the first 64k of memory (ie ld $2,0x4000c) we
{
case M_DABS:
dbl = 1;
+ /* Fall through. */
case M_ABS:
/* bgez $a0,1f
move v0,$a0
case M_BGEL:
likely = 1;
+ /* Fall through. */
case M_BGE:
if (op[1] == 0)
macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, op[0]);
case M_BGTL_I:
likely = 1;
+ /* Fall through. */
case M_BGT_I:
/* Check for > max integer. */
if (imm_expr.X_add_number >= GPR_SMAX)
case M_BGEUL:
likely = 1;
+ /* Fall through. */
case M_BGEU:
if (op[1] == 0)
goto do_true;
case M_BGTUL_I:
likely = 1;
+ /* Fall through. */
case M_BGTU_I:
if (op[0] == 0
|| (GPR_SIZE == 32
case M_BGTL:
likely = 1;
+ /* Fall through. */
case M_BGT:
if (op[1] == 0)
macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, op[0]);
case M_BGTUL:
likely = 1;
+ /* Fall through. */
case M_BGTU:
if (op[1] == 0)
macro_build_branch_rsrt (likely ? M_BNEL : M_BNE,
case M_BLEL:
likely = 1;
+ /* Fall through. */
case M_BLE:
if (op[1] == 0)
macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, op[0]);
case M_BLEL_I:
likely = 1;
+ /* Fall through. */
case M_BLE_I:
if (imm_expr.X_add_number >= GPR_SMAX)
goto do_true;
case M_BLEUL:
likely = 1;
+ /* Fall through. */
case M_BLEU:
if (op[1] == 0)
macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ,
case M_BLEUL_I:
likely = 1;
+ /* Fall through. */
case M_BLEU_I:
if (op[0] == 0
|| (GPR_SIZE == 32
case M_BLTL:
likely = 1;
+ /* Fall through. */
case M_BLT:
if (op[1] == 0)
macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, op[0]);
case M_BLTUL:
likely = 1;
+ /* Fall through. */
case M_BLTU:
if (op[1] == 0)
goto do_false;
case M_DDIV_3:
dbl = 1;
+ /* Fall through. */
case M_DIV_3:
s = "mflo";
goto do_div3;
case M_DREM_3:
dbl = 1;
+ /* Fall through. */
case M_REM_3:
s = "mfhi";
do_div3:
case M_DLCA_AB:
dbl = 1;
+ /* Fall through. */
case M_LCA_AB:
call = 1;
goto do_la;
case M_DLA_AB:
dbl = 1;
+ /* Fall through. */
case M_LA_AB:
do_la:
/* Load the address of a symbol into a register. If breg is not
else if (offbits != 16)
{
/* The offset field is too narrow to be used for a low-part
- relocation, so load the whole address into the auxillary
+ relocation, so load the whole address into the auxiliary
register. */
load_address (tempreg, &offset_expr, &used_at);
if (breg != 0)
case M_DMUL:
dbl = 1;
+ /* Fall through. */
case M_MUL:
if (mips_opts.arch == CPU_R5900)
macro_build (NULL, dbl ? "dmultu" : "multu", "d,s,t", op[0], op[1],
case M_DMUL_I:
dbl = 1;
+ /* Fall through. */
case M_MUL_I:
/* The MIPS assembler some times generates shifts and adds. I'm
not trying to be that fancy. GCC should do this for us
case M_DMULO_I:
dbl = 1;
+ /* Fall through. */
case M_MULO_I:
imm = 1;
goto do_mulo;
case M_DMULO:
dbl = 1;
+ /* Fall through. */
case M_MULO:
do_mulo:
start_noreorder ();
case M_DMULOU_I:
dbl = 1;
+ /* Fall through. */
case M_MULOU_I:
imm = 1;
goto do_mulou;
case M_DMULOU:
dbl = 1;
+ /* Fall through. */
case M_MULOU:
do_mulou:
start_noreorder ();
case M_DDIV_3:
dbl = 1;
+ /* Fall through. */
case M_DIV_3:
s = "mflo";
goto do_div3;
case M_DREM_3:
dbl = 1;
+ /* Fall through. */
case M_REM_3:
s = "mfhi";
do_div3:
start_noreorder ();
- macro_build (NULL, dbl ? "ddiv" : "div", "0,x,y", op[1], op[2]);
+ macro_build (NULL, dbl ? "ddiv" : "div", ".,x,y", op[1], op[2]);
expr1.X_add_number = 2;
macro_build (&expr1, "bnez", "x,p", op[2]);
macro_build (NULL, "break", "6", 7);
s2 = "mfhi";
do_divu3:
start_noreorder ();
- macro_build (NULL, s, "0,x,y", op[1], op[2]);
+ macro_build (NULL, s, ".,x,y", op[1], op[2]);
expr1.X_add_number = 2;
macro_build (&expr1, "bnez", "x,p", op[2]);
macro_build (NULL, "break", "6", 7);
case M_DMUL:
dbl = 1;
+ /* Fall through. */
case M_MUL:
macro_build (NULL, dbl ? "dmultu" : "multu", "x,y", op[1], op[2]);
macro_build (NULL, "mflo", "x", op[0]);
case M_SUBU_I:
do_subu:
imm_expr.X_add_number = -imm_expr.X_add_number;
- macro_build (&imm_expr, dbl ? "daddiu" : "addiu", "y,x,4", op[0], op[1]);
+ macro_build (&imm_expr, dbl ? "daddiu" : "addiu", "y,x,F", op[0], op[1]);
break;
case M_SUBU_I_2:
suffix = 0;
if (suffix)
{
- memcpy (name + opend - 2, name + opend, length - opend + 1);
+ memmove (name + opend - 2, name + opend, length - opend + 1);
insn = (struct mips_opcode *) hash_find (hash, name);
if (insn)
{
char *end, *s, c;
struct mips_opcode *first;
struct mips_operand_token *tokens;
+ unsigned int l;
- forced_insn_length = 0;
-
- for (s = str; ISLOWER (*s); ++s)
+ for (s = str; *s != '\0' && *s != '.' && *s != ' '; ++s)
;
end = s;
c = *end;
+
+ l = 0;
switch (c)
{
case '\0':
break;
case '.':
- if (s[1] == 't' && s[2] == ' ')
+ s++;
+ if (*s == 't')
{
- forced_insn_length = 2;
- s += 3;
- break;
+ l = 2;
+ s++;
}
- else if (s[1] == 'e' && s[2] == ' ')
+ else if (*s == 'e')
{
- forced_insn_length = 4;
- s += 3;
- break;
+ l = 4;
+ s++;
}
- /* Fall through. */
- default:
+ if (*s == '\0')
+ break;
+ else if (*s++ == ' ')
+ break;
set_insn_error (0, _("unrecognized opcode"));
return;
}
-
- if (mips_opts.noautoextend && !forced_insn_length)
- forced_insn_length = 2;
+ forced_insn_length = l;
*end = 0;
first = (struct mips_opcode *) hash_find (mips16_op_hash, str);
mips16_immed_extend (offsetT val, unsigned int nbits)
{
int extval;
- if (nbits == 16)
+
+ extval = 0;
+ val &= (1U << nbits) - 1;
+ if (nbits == 16 || nbits == 9)
{
extval = ((val >> 11) & 0x1f) | (val & 0x7e0);
val &= 0x1f;
extval = ((val >> 11) & 0xf) | (val & 0x7f0);
val &= 0xf;
}
- else
+ else if (nbits == 6)
{
extval = ((val & 0x1f) << 6) | (val & 0x20);
val = 0;
_("operand value out of range for instruction"));
}
uval = ((unsigned int) val >> operand->shift) - operand->bias;
- if (length == 2)
+ if (length == 2 || operand->root.lsb != 0)
*insn = mips_insert_operand (&operand->root, *insn, uval);
else
*insn |= mips16_immed_extend (uval, operand->root.size);
{"%got_lo", BFD_RELOC_MIPS_GOT_LO16},
{"%got", BFD_RELOC_MIPS_GOT16},
{"%gp_rel", BFD_RELOC_GPREL16},
+ {"%gprel", BFD_RELOC_GPREL16},
{"%half", BFD_RELOC_16},
{"%highest", BFD_RELOC_MIPS_HIGHEST},
{"%higher", BFD_RELOC_MIPS_HIGHER},
static const struct percent_op_match mips16_percent_op[] =
{
{"%lo", BFD_RELOC_MIPS16_LO16},
+ {"%gp_rel", BFD_RELOC_MIPS16_GPREL},
{"%gprel", BFD_RELOC_MIPS16_GPREL},
{"%got", BFD_RELOC_MIPS16_GOT16},
{"%call16", BFD_RELOC_MIPS16_CALL16},
mips_relax_branch = 0;
break;
+ case OPTION_IGNORE_BRANCH_ISA:
+ mips_ignore_branch_isa = TRUE;
+ break;
+
+ case OPTION_NO_IGNORE_BRANCH_ISA:
+ mips_ignore_branch_isa = FALSE;
+ break;
+
case OPTION_INSN32:
file_mips_opts.insn32 = TRUE;
break;
constants; we'll report an error for those later. */
if (got16_reloc_p (l->fixp->fx_r_type)
&& !(l->fixp->fx_addsy
- && pic_need_relax (l->fixp->fx_addsy, l->seg)))
+ && pic_need_relax (l->fixp->fx_addsy)))
continue;
/* Check quickly whether the next fixup happens to be a matching %lo. */
|| fixp->fx_r_type == BFD_RELOC_MICROMIPS_16_PCREL_S1)
return 1;
+ /* We want to keep BFD_RELOC_16_PCREL_S2 BFD_RELOC_MIPS_21_PCREL_S2
+ and BFD_RELOC_MIPS_26_PCREL_S2 relocations against MIPS16 and
+ microMIPS symbols so that we can do cross-mode branch diagnostics
+ and BAL to JALX conversion by the linker. */
+ if ((fixp->fx_r_type == BFD_RELOC_16_PCREL_S2
+ || fixp->fx_r_type == BFD_RELOC_MIPS_21_PCREL_S2
+ || fixp->fx_r_type == BFD_RELOC_MIPS_26_PCREL_S2)
+ && fixp->fx_addsy
+ && ELF_ST_IS_COMPRESSED (S_GET_OTHER (fixp->fx_addsy)))
+ return 1;
+
/* We want all PC-relative relocations to be kept for R6 relaxation. */
if (ISA_IS_R6 (file_mips_opts.isa)
&& (fixp->fx_r_type == BFD_RELOC_16_PCREL_S2
write_insn (buf, insn);
}
-/* Apply a fixup to the object file. */
+/* Return TRUE if the instruction pointed to by FIXP is an invalid jump
+ to a symbol in another ISA mode, which cannot be converted to JALX. */
-void
-md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED)
+static bfd_boolean
+fix_bad_cross_mode_jump_p (fixS *fixP)
{
+ unsigned long opcode;
+ int other;
char *buf;
- unsigned long insn;
- reloc_howto_type *howto;
- if (fixP->fx_pcrel)
- switch (fixP->fx_r_type)
- {
- case BFD_RELOC_16_PCREL_S2:
- case BFD_RELOC_MIPS16_16_PCREL_S1:
- case BFD_RELOC_MICROMIPS_7_PCREL_S1:
- case BFD_RELOC_MICROMIPS_10_PCREL_S1:
- case BFD_RELOC_MICROMIPS_16_PCREL_S1:
- case BFD_RELOC_32_PCREL:
- case BFD_RELOC_MIPS_21_PCREL_S2:
- case BFD_RELOC_MIPS_26_PCREL_S2:
- case BFD_RELOC_MIPS_18_PCREL_S3:
- case BFD_RELOC_MIPS_19_PCREL_S2:
- case BFD_RELOC_HI16_S_PCREL:
- case BFD_RELOC_LO16_PCREL:
- break;
+ if (!fixP->fx_addsy || S_FORCE_RELOC (fixP->fx_addsy, TRUE))
+ return FALSE;
- case BFD_RELOC_32:
- fixP->fx_r_type = BFD_RELOC_32_PCREL;
- break;
+ other = S_GET_OTHER (fixP->fx_addsy);
+ buf = fixP->fx_frag->fr_literal + fixP->fx_where;
+ opcode = read_reloc_insn (buf, fixP->fx_r_type) >> 26;
+ switch (fixP->fx_r_type)
+ {
+ case BFD_RELOC_MIPS_JMP:
+ return opcode != 0x1d && opcode != 0x03 && ELF_ST_IS_COMPRESSED (other);
+ case BFD_RELOC_MICROMIPS_JMP:
+ return opcode != 0x3c && opcode != 0x3d && !ELF_ST_IS_MICROMIPS (other);
+ default:
+ return FALSE;
+ }
+}
- default:
- as_bad_where (fixP->fx_file, fixP->fx_line,
+/* Return TRUE if the instruction pointed to by FIXP is an invalid JALX
+ jump to a symbol in the same ISA mode. */
+
+static bfd_boolean
+fix_bad_same_mode_jalx_p (fixS *fixP)
+{
+ unsigned long opcode;
+ int other;
+ char *buf;
+
+ if (!fixP->fx_addsy || S_FORCE_RELOC (fixP->fx_addsy, TRUE))
+ return FALSE;
+
+ other = S_GET_OTHER (fixP->fx_addsy);
+ buf = fixP->fx_frag->fr_literal + fixP->fx_where;
+ opcode = read_reloc_insn (buf, fixP->fx_r_type) >> 26;
+ switch (fixP->fx_r_type)
+ {
+ case BFD_RELOC_MIPS_JMP:
+ return opcode == 0x1d && !ELF_ST_IS_COMPRESSED (other);
+ case BFD_RELOC_MIPS16_JMP:
+ return opcode == 0x07 && ELF_ST_IS_COMPRESSED (other);
+ case BFD_RELOC_MICROMIPS_JMP:
+ return opcode == 0x3c && ELF_ST_IS_COMPRESSED (other);
+ default:
+ return FALSE;
+ }
+}
+
+/* Return TRUE if the instruction pointed to by FIXP is an invalid jump
+ to a symbol whose value plus addend is not aligned according to the
+ ultimate (after linker relaxation) jump instruction's immediate field
+ requirement, either to (1 << SHIFT), or, for jumps from microMIPS to
+ regular MIPS code, to (1 << 2). */
+
+static bfd_boolean
+fix_bad_misaligned_jump_p (fixS *fixP, int shift)
+{
+ bfd_boolean micro_to_mips_p;
+ valueT val;
+ int other;
+
+ if (!fixP->fx_addsy || S_FORCE_RELOC (fixP->fx_addsy, TRUE))
+ return FALSE;
+
+ other = S_GET_OTHER (fixP->fx_addsy);
+ val = S_GET_VALUE (fixP->fx_addsy) | ELF_ST_IS_COMPRESSED (other);
+ val += fixP->fx_offset;
+ micro_to_mips_p = (fixP->fx_r_type == BFD_RELOC_MICROMIPS_JMP
+ && !ELF_ST_IS_MICROMIPS (other));
+ return ((val & ((1 << (micro_to_mips_p ? 2 : shift)) - 1))
+ != ELF_ST_IS_COMPRESSED (other));
+}
+
+/* Return TRUE if the instruction pointed to by FIXP is an invalid branch
+ to a symbol whose annotation indicates another ISA mode. For absolute
+ symbols check the ISA bit instead.
+
+ We accept BFD_RELOC_16_PCREL_S2 relocations against MIPS16 and microMIPS
+ symbols or BFD_RELOC_MICROMIPS_16_PCREL_S1 relocations against regular
+ MIPS symbols and associated with BAL instructions as these instructions
+ may be converted to JALX by the linker. */
+
+static bfd_boolean
+fix_bad_cross_mode_branch_p (fixS *fixP)
+{
+ bfd_boolean absolute_p;
+ unsigned long opcode;
+ asection *symsec;
+ valueT val;
+ int other;
+ char *buf;
+
+ if (mips_ignore_branch_isa)
+ return FALSE;
+
+ if (!fixP->fx_addsy || S_FORCE_RELOC (fixP->fx_addsy, TRUE))
+ return FALSE;
+
+ symsec = S_GET_SEGMENT (fixP->fx_addsy);
+ absolute_p = bfd_is_abs_section (symsec);
+
+ val = S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset;
+ other = S_GET_OTHER (fixP->fx_addsy);
+
+ buf = fixP->fx_frag->fr_literal + fixP->fx_where;
+ opcode = read_reloc_insn (buf, fixP->fx_r_type) >> 16;
+ switch (fixP->fx_r_type)
+ {
+ case BFD_RELOC_16_PCREL_S2:
+ return ((absolute_p ? val & 1 : ELF_ST_IS_COMPRESSED (other))
+ && opcode != 0x0411);
+ case BFD_RELOC_MICROMIPS_16_PCREL_S1:
+ return ((absolute_p ? !(val & 1) : !ELF_ST_IS_MICROMIPS (other))
+ && opcode != 0x4060);
+ case BFD_RELOC_MIPS_21_PCREL_S2:
+ case BFD_RELOC_MIPS_26_PCREL_S2:
+ return absolute_p ? val & 1 : ELF_ST_IS_COMPRESSED (other);
+ case BFD_RELOC_MIPS16_16_PCREL_S1:
+ return absolute_p ? !(val & 1) : !ELF_ST_IS_MIPS16 (other);
+ case BFD_RELOC_MICROMIPS_7_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_10_PCREL_S1:
+ return absolute_p ? !(val & 1) : !ELF_ST_IS_MICROMIPS (other);
+ default:
+ abort ();
+ }
+}
+
+/* Return TRUE if the symbol plus addend associated with a regular MIPS
+ branch instruction pointed to by FIXP is not aligned according to the
+ branch instruction's immediate field requirement. We need the addend
+ to preserve the ISA bit and also the sum must not have bit 2 set. We
+ must explicitly OR in the ISA bit from symbol annotation as the bit
+ won't be set in the symbol's value then. */
+
+static bfd_boolean
+fix_bad_misaligned_branch_p (fixS *fixP)
+{
+ bfd_boolean absolute_p;
+ asection *symsec;
+ valueT isa_bit;
+ valueT val;
+ valueT off;
+ int other;
+
+ if (!fixP->fx_addsy || S_FORCE_RELOC (fixP->fx_addsy, TRUE))
+ return FALSE;
+
+ symsec = S_GET_SEGMENT (fixP->fx_addsy);
+ absolute_p = bfd_is_abs_section (symsec);
+
+ val = S_GET_VALUE (fixP->fx_addsy);
+ other = S_GET_OTHER (fixP->fx_addsy);
+ off = fixP->fx_offset;
+
+ isa_bit = absolute_p ? (val + off) & 1 : ELF_ST_IS_COMPRESSED (other);
+ val |= ELF_ST_IS_COMPRESSED (other);
+ val += off;
+ return (val & 0x3) != isa_bit;
+}
+
+/* Make the necessary checks on a regular MIPS branch pointed to by FIXP
+ and its calculated value VAL. */
+
+static void
+fix_validate_branch (fixS *fixP, valueT val)
+{
+ if (fixP->fx_done && (val & 0x3) != 0)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch to misaligned address (0x%lx)"),
+ (long) (val + md_pcrel_from (fixP)));
+ else if (fix_bad_cross_mode_branch_p (fixP))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch to a symbol in another ISA mode"));
+ else if (fix_bad_misaligned_branch_p (fixP))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch to misaligned address (0x%lx)"),
+ (long) (S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset));
+ else if (HAVE_IN_PLACE_ADDENDS && (fixP->fx_offset & 0x3) != 0)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("cannot encode misaligned addend "
+ "in the relocatable field (0x%lx)"),
+ (long) fixP->fx_offset);
+}
+
+/* Apply a fixup to the object file. */
+
+void
+md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED)
+{
+ char *buf;
+ unsigned long insn;
+ reloc_howto_type *howto;
+
+ if (fixP->fx_pcrel)
+ switch (fixP->fx_r_type)
+ {
+ case BFD_RELOC_16_PCREL_S2:
+ case BFD_RELOC_MIPS16_16_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_7_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_10_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_16_PCREL_S1:
+ case BFD_RELOC_32_PCREL:
+ case BFD_RELOC_MIPS_21_PCREL_S2:
+ case BFD_RELOC_MIPS_26_PCREL_S2:
+ case BFD_RELOC_MIPS_18_PCREL_S3:
+ case BFD_RELOC_MIPS_19_PCREL_S2:
+ case BFD_RELOC_HI16_S_PCREL:
+ case BFD_RELOC_LO16_PCREL:
+ break;
+
+ case BFD_RELOC_32:
+ fixP->fx_r_type = BFD_RELOC_32_PCREL;
+ break;
+
+ default:
+ as_bad_where (fixP->fx_file, fixP->fx_line,
_("PC-relative reference to a different section"));
break;
}
break;
case BFD_RELOC_MIPS_JMP:
+ case BFD_RELOC_MIPS16_JMP:
+ case BFD_RELOC_MICROMIPS_JMP:
+ {
+ int shift;
+
+ gas_assert (!fixP->fx_done);
+
+ /* Shift is 2, unusually, for microMIPS JALX. */
+ if (fixP->fx_r_type == BFD_RELOC_MICROMIPS_JMP
+ && (read_compressed_insn (buf, 4) >> 26) != 0x3c)
+ shift = 1;
+ else
+ shift = 2;
+
+ if (fix_bad_cross_mode_jump_p (fixP))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("jump to a symbol in another ISA mode"));
+ else if (fix_bad_same_mode_jalx_p (fixP))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("JALX to a symbol in the same ISA mode"));
+ else if (fix_bad_misaligned_jump_p (fixP, shift))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("jump to misaligned address (0x%lx)"),
+ (long) (S_GET_VALUE (fixP->fx_addsy)
+ + fixP->fx_offset));
+ else if (HAVE_IN_PLACE_ADDENDS
+ && (fixP->fx_offset & ((1 << shift) - 1)) != 0)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("cannot encode misaligned addend "
+ "in the relocatable field (0x%lx)"),
+ (long) fixP->fx_offset);
+ }
+ /* Fall through. */
+
case BFD_RELOC_MIPS_SHIFT5:
case BFD_RELOC_MIPS_SHIFT6:
case BFD_RELOC_MIPS_GOT_DISP:
case BFD_RELOC_MIPS16_HI16:
case BFD_RELOC_MIPS16_HI16_S:
case BFD_RELOC_MIPS16_LO16:
- case BFD_RELOC_MIPS16_JMP:
- case BFD_RELOC_MICROMIPS_JMP:
case BFD_RELOC_MICROMIPS_GOT_DISP:
case BFD_RELOC_MICROMIPS_GOT_PAGE:
case BFD_RELOC_MICROMIPS_GOT_OFST:
break;
case BFD_RELOC_MIPS_21_PCREL_S2:
- if ((*valP & 0x3) != 0)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("branch to misaligned address (%lx)"), (long) *valP);
+ fix_validate_branch (fixP, *valP);
if (!fixP->fx_done)
break;
break;
case BFD_RELOC_MIPS_26_PCREL_S2:
- if ((*valP & 0x3) != 0)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("branch to misaligned address (%lx)"), (long) *valP);
+ fix_validate_branch (fixP, *valP);
if (!fixP->fx_done)
break;
break;
case BFD_RELOC_16_PCREL_S2:
- if ((*valP & 0x3) != 0)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("branch to misaligned address (%lx)"), (long) *valP);
+ fix_validate_branch (fixP, *valP);
/* We need to save the bits in the instruction since fixup_segment()
might be deleting the relocation entry (i.e., a branch within
insn |= (*valP >> 2) & 0xffff;
write_insn (buf, insn);
}
- else if (mips_pic == NO_PIC
+ else if (fixP->fx_tcbit2
&& fixP->fx_done
&& fixP->fx_frag->fr_address >= text_section->vma
&& (fixP->fx_frag->fr_address
case BFD_RELOC_MICROMIPS_10_PCREL_S1:
case BFD_RELOC_MICROMIPS_16_PCREL_S1:
gas_assert (!fixP->fx_done);
+ if (fix_bad_cross_mode_branch_p (fixP))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch to a symbol in another ISA mode"));
+ else if (fixP->fx_addsy
+ && !S_FORCE_RELOC (fixP->fx_addsy, TRUE)
+ && !bfd_is_abs_section (S_GET_SEGMENT (fixP->fx_addsy))
+ && (fixP->fx_offset & 0x1) != 0)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch to misaligned address (0x%lx)"),
+ (long) (S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset));
+ else if (HAVE_IN_PLACE_ADDENDS && (fixP->fx_offset & 0x1) != 0)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("cannot encode misaligned addend "
+ "in the relocatable field (0x%lx)"),
+ (long) fixP->fx_offset);
break;
case BFD_RELOC_VTABLE_INHERIT:
if (section_type == SHT_MIPS_DWARF)
section_type = SHT_PROGBITS;
- obj_elf_change_section (section_name, section_type, section_flag,
+ obj_elf_change_section (section_name, section_type, 0, section_flag,
section_entry_size, 0, 0, 0);
if (now_seg->name != section_name)
static void
s_mips_stab (int type)
{
+ file_mips_check_options ();
mips_mark_labels ();
s_stab (type);
}
/* Return true if the given symbol should be considered local for SVR4 PIC. */
static bfd_boolean
-pic_need_relax (symbolS *sym, asection *segtype)
+pic_need_relax (symbolS *sym)
{
asection *symsec;
return (!bfd_is_und_section (symsec)
&& !bfd_is_abs_section (symsec)
&& !bfd_is_com_section (symsec)
- && !s_is_linkonce (sym, segtype)
/* A global or weak symbol is treated as external. */
&& (!S_IS_WEAK (sym) && !S_IS_EXTERNAL (sym)));
}
+\f
+/* Given a MIPS16 variant frag FRAGP and PC-relative operand PCREL_OP
+ convert a section-relative value VAL to the equivalent PC-relative
+ value. */
+static offsetT
+mips16_pcrel_val (fragS *fragp, const struct mips_pcrel_operand *pcrel_op,
+ offsetT val, long stretch)
+{
+ fragS *sym_frag;
+ addressT addr;
+
+ gas_assert (pcrel_op->root.root.type == OP_PCREL);
+
+ sym_frag = symbol_get_frag (fragp->fr_symbol);
+
+ /* If the relax_marker of the symbol fragment differs from the
+ relax_marker of this fragment, we have not yet adjusted the
+ symbol fragment fr_address. We want to add in STRETCH in
+ order to get a better estimate of the address. This
+ particularly matters because of the shift bits. */
+ if (stretch != 0 && sym_frag->relax_marker != fragp->relax_marker)
+ {
+ fragS *f;
+
+ /* Adjust stretch for any alignment frag. Note that if have
+ been expanding the earlier code, the symbol may be
+ defined in what appears to be an earlier frag. FIXME:
+ This doesn't handle the fr_subtype field, which specifies
+ a maximum number of bytes to skip when doing an
+ alignment. */
+ for (f = fragp; f != NULL && f != sym_frag; f = f->fr_next)
+ {
+ if (f->fr_type == rs_align || f->fr_type == rs_align_code)
+ {
+ if (stretch < 0)
+ stretch = -(-stretch & ~((1 << (int) f->fr_offset) - 1));
+ else
+ stretch &= ~((1 << (int) f->fr_offset) - 1);
+ if (stretch == 0)
+ break;
+ }
+ }
+ if (f != NULL)
+ val += stretch;
+ }
+
+ addr = fragp->fr_address + fragp->fr_fix;
+
+ /* The base address rules are complicated. The base address of
+ a branch is the following instruction. The base address of a
+ PC relative load or add is the instruction itself, but if it
+ is in a delay slot (in which case it can not be extended) use
+ the address of the instruction whose delay slot it is in. */
+ if (pcrel_op->include_isa_bit)
+ {
+ addr += 2;
+
+ /* If we are currently assuming that this frag should be
+ extended, then the current address is two bytes higher. */
+ if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ addr += 2;
+
+ /* Ignore the low bit in the target, since it will be set
+ for a text label. */
+ val &= -2;
+ }
+ else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
+ addr -= 4;
+ else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
+ addr -= 2;
+
+ val -= addr & -(1 << pcrel_op->align_log2);
+
+ return val;
+}
/* Given a mips16 variant frag FRAGP, return non-zero if it needs an
extended opcode. SEC is the section the frag is in. */
static int
mips16_extended_frag (fragS *fragp, asection *sec, long stretch)
{
- int type;
const struct mips_int_operand *operand;
offsetT val;
segT symsec;
- fragS *sym_frag;
+ int type;
if (RELAX_MIPS16_USER_SMALL (fragp->fr_subtype))
return 0;
: !bfd_is_abs_section (symsec)))
return 1;
- sym_frag = symbol_get_frag (fragp->fr_symbol);
val = S_GET_VALUE (fragp->fr_symbol) + fragp->fr_offset;
if (operand->root.type == OP_PCREL)
{
const struct mips_pcrel_operand *pcrel_op;
- addressT addr;
offsetT maxtiny;
- if (RELAX_MIPS16_LONG_BRANCH (fragp->fr_subtype))
+ if (RELAX_MIPS16_ALWAYS_EXTENDED (fragp->fr_subtype))
return 1;
pcrel_op = (const struct mips_pcrel_operand *) operand;
-
- /* If the relax_marker of the symbol fragment differs from the
- relax_marker of this fragment, we have not yet adjusted the
- symbol fragment fr_address. We want to add in STRETCH in
- order to get a better estimate of the address. This
- particularly matters because of the shift bits. */
- if (stretch != 0
- && sym_frag->relax_marker != fragp->relax_marker)
- {
- fragS *f;
-
- /* Adjust stretch for any alignment frag. Note that if have
- been expanding the earlier code, the symbol may be
- defined in what appears to be an earlier frag. FIXME:
- This doesn't handle the fr_subtype field, which specifies
- a maximum number of bytes to skip when doing an
- alignment. */
- for (f = fragp; f != NULL && f != sym_frag; f = f->fr_next)
- {
- if (f->fr_type == rs_align || f->fr_type == rs_align_code)
- {
- if (stretch < 0)
- stretch = - ((- stretch)
- & ~ ((1 << (int) f->fr_offset) - 1));
- else
- stretch &= ~ ((1 << (int) f->fr_offset) - 1);
- if (stretch == 0)
- break;
- }
- }
- if (f != NULL)
- val += stretch;
- }
-
- addr = fragp->fr_address + fragp->fr_fix;
-
- /* The base address rules are complicated. The base address of
- a branch is the following instruction. The base address of a
- PC relative load or add is the instruction itself, but if it
- is in a delay slot (in which case it can not be extended) use
- the address of the instruction whose delay slot it is in. */
- if (pcrel_op->include_isa_bit)
- {
- addr += 2;
-
- /* If we are currently assuming that this frag should be
- extended, then, the current address is two bytes
- higher. */
- if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
- addr += 2;
-
- /* Ignore the low bit in the target, since it will be set
- for a text label. */
- val &= -2;
- }
- else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
- addr -= 4;
- else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
- addr -= 2;
-
- val -= addr & -(1 << pcrel_op->align_log2);
+ val = mips16_pcrel_val (fragp, pcrel_op, val, stretch);
/* If any of the shifted bits are set, we must use an extended
opcode. If the address depends on the size of this
if ((val & ((1 << operand->shift) - 1)) != 0)
{
fragp->fr_subtype =
- RELAX_MIPS16_MARK_LONG_BRANCH (fragp->fr_subtype);
+ RELAX_MIPS16_MARK_ALWAYS_EXTENDED (fragp->fr_subtype);
return 1;
}
&& ! RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
{
fragp->fr_subtype =
- RELAX_MIPS16_MARK_LONG_BRANCH (fragp->fr_subtype);
+ RELAX_MIPS16_MARK_ALWAYS_EXTENDED (fragp->fr_subtype);
return 1;
}
}
return !mips16_immed_in_range_p (operand, BFD_RELOC_UNUSED, val);
}
+/* Given a MIPS16 variant frag FRAGP, return non-zero if it needs
+ macro expansion. SEC is the section the frag is in. We only
+ support PC-relative instructions (LA, DLA, LW, LD) here, in
+ non-PIC code using 32-bit addressing. */
+
+static int
+mips16_macro_frag (fragS *fragp, asection *sec, long stretch)
+{
+ const struct mips_pcrel_operand *pcrel_op;
+ const struct mips_int_operand *operand;
+ offsetT val;
+ segT symsec;
+ int type;
+
+ gas_assert (!RELAX_MIPS16_USER_SMALL (fragp->fr_subtype));
+
+ if (RELAX_MIPS16_USER_EXT (fragp->fr_subtype))
+ return 0;
+ if (!RELAX_MIPS16_SYM32 (fragp->fr_subtype))
+ return 0;
+
+ type = RELAX_MIPS16_TYPE (fragp->fr_subtype);
+ switch (type)
+ {
+ case 'A':
+ case 'B':
+ case 'E':
+ symsec = S_GET_SEGMENT (fragp->fr_symbol);
+ if (bfd_is_abs_section (symsec))
+ return 1;
+ if (RELAX_MIPS16_PIC (fragp->fr_subtype))
+ return 0;
+ if (S_FORCE_RELOC (fragp->fr_symbol, TRUE) || sec != symsec)
+ return 1;
+
+ operand = mips16_immed_operand (type, TRUE);
+ val = S_GET_VALUE (fragp->fr_symbol) + fragp->fr_offset;
+ pcrel_op = (const struct mips_pcrel_operand *) operand;
+ val = mips16_pcrel_val (fragp, pcrel_op, val, stretch);
+
+ return !mips16_immed_in_range_p (operand, BFD_RELOC_UNUSED, val);
+
+ default:
+ return 0;
+ }
+}
+
/* Compute the length of a branch sequence, and adjust the
RELAX_BRANCH_TOOFAR bit accordingly. If FRAGP is NULL, the
worst-case length is computed, with UPDATE being used to indicate
if (fragp && update && toofar != RELAX_BRANCH_TOOFAR (fragp->fr_subtype))
fragp->fr_subtype
= RELAX_BRANCH_ENCODE (RELAX_BRANCH_AT (fragp->fr_subtype),
+ RELAX_BRANCH_PIC (fragp->fr_subtype),
RELAX_BRANCH_UNCOND (fragp->fr_subtype),
RELAX_BRANCH_LIKELY (fragp->fr_subtype),
RELAX_BRANCH_LINK (fragp->fr_subtype),
if (fragp ? RELAX_BRANCH_LIKELY (fragp->fr_subtype) : (update > 0))
length += 8;
- if (mips_pic != NO_PIC)
+ if (!fragp || RELAX_BRANCH_PIC (fragp->fr_subtype))
{
/* Additional space for PIC loading of target address. */
length += 8;
return length;
}
+/* Get a FRAG's branch instruction delay slot size, either from the
+ short-delay-slot bit of a branch-and-link instruction if AL is TRUE,
+ or SHORT_INSN_SIZE otherwise. */
+
+static int
+frag_branch_delay_slot_size (fragS *fragp, bfd_boolean al, int short_insn_size)
+{
+ char *buf = fragp->fr_literal + fragp->fr_fix;
+
+ if (al)
+ return (read_compressed_insn (buf, 4) & 0x02000000) ? 2 : 4;
+ else
+ return short_insn_size;
+}
+
/* Compute the length of a branch sequence, and adjust the
RELAX_MICROMIPS_TOOFAR32 bit accordingly. If FRAGP is NULL, the
worst-case length is computed, with UPDATE being used to indicate
static int
relaxed_micromips_32bit_branch_length (fragS *fragp, asection *sec, int update)
{
+ bfd_boolean insn32 = TRUE;
+ bfd_boolean nods = TRUE;
+ bfd_boolean pic = TRUE;
+ bfd_boolean al = TRUE;
+ int short_insn_size;
bfd_boolean toofar;
int length;
+ if (fragp)
+ {
+ insn32 = RELAX_MICROMIPS_INSN32 (fragp->fr_subtype);
+ nods = RELAX_MICROMIPS_NODS (fragp->fr_subtype);
+ pic = RELAX_MICROMIPS_PIC (fragp->fr_subtype);
+ al = RELAX_MICROMIPS_LINK (fragp->fr_subtype);
+ }
+ short_insn_size = insn32 ? 4 : 2;
+
if (fragp
&& S_IS_DEFINED (fragp->fr_symbol)
&& !S_IS_WEAK (fragp->fr_symbol)
bfd_boolean compact = FALSE;
bfd_boolean uncond;
- if (compact_known)
- compact = RELAX_MICROMIPS_COMPACT (fragp->fr_subtype);
if (fragp)
- uncond = RELAX_MICROMIPS_UNCOND (fragp->fr_subtype);
+ {
+ compact = RELAX_MICROMIPS_COMPACT (fragp->fr_subtype);
+ uncond = RELAX_MICROMIPS_UNCOND (fragp->fr_subtype);
+ }
else
uncond = update < 0;
into:
j label # 4 bytes
- nop # 2 bytes if compact && !PIC
+ nop # 2/4 bytes if
+ # compact && (!PIC || insn32)
0:
*/
- if (mips_pic == NO_PIC && (!compact_known || compact))
- length += 2;
+ if ((!pic || insn32) && (!compact_known || compact))
+ length += short_insn_size;
/* If assembling PIC code, we further turn:
lw/ld at, %got(label)(gp) # 4 bytes
d/addiu at, %lo(label) # 4 bytes
- jr/c at # 2 bytes
+ jr/c at # 2/4 bytes
*/
- if (mips_pic != NO_PIC)
- length += 6;
+ if (pic)
+ length += 4 + short_insn_size;
+
+ /* Add an extra nop if the jump has no compact form and we need
+ to fill the delay slot. */
+ if ((!pic || al) && nods)
+ length += (fragp
+ ? frag_branch_delay_slot_size (fragp, al, short_insn_size)
+ : short_insn_size);
/* If branch <br> is conditional, we prepend negated branch <brneg>:
<brneg> 0f # 4 bytes
- nop # 2 bytes if !compact
+ nop # 2/4 bytes if !compact
*/
if (!uncond)
- length += (compact_known && compact) ? 4 : 6;
+ length += (compact_known && compact) ? 4 : 4 + short_insn_size;
+ }
+ else if (nods)
+ {
+ /* Add an extra nop to fill the delay slot. */
+ gas_assert (fragp);
+ length += frag_branch_delay_slot_size (fragp, al, short_insn_size);
}
return length;
}
if (RELAX_MIPS16_P (fragp->fr_subtype))
- /* We don't want to modify the EXTENDED bit here; it might get us
- into infinite loops. We change it only in mips_relax_frag(). */
- return (RELAX_MIPS16_EXTENDED (fragp->fr_subtype) ? 4 : 2);
+ {
+ /* We don't want to modify the EXTENDED bit here; it might get us
+ into infinite loops. We change it only in mips_relax_frag(). */
+ if (RELAX_MIPS16_MACRO (fragp->fr_subtype))
+ return RELAX_MIPS16_E2 (fragp->fr_subtype) ? 8 : 12;
+ else
+ return RELAX_MIPS16_EXTENDED (fragp->fr_subtype) ? 4 : 2;
+ }
if (RELAX_MICROMIPS_P (fragp->fr_subtype))
{
return length;
}
- if (mips_pic == NO_PIC)
- change = nopic_need_relax (fragp->fr_symbol, 0);
- else if (mips_pic == SVR4_PIC)
- change = pic_need_relax (fragp->fr_symbol, segtype);
- else if (mips_pic == VXWORKS_PIC)
+ if (mips_pic == VXWORKS_PIC)
/* For vxworks, GOT16 relocations never have a corresponding LO16. */
change = 0;
+ else if (RELAX_PIC (fragp->fr_subtype))
+ change = pic_need_relax (fragp->fr_symbol);
else
- abort ();
+ change = nopic_need_relax (fragp->fr_symbol, 0);
if (change)
{
is then identified by the section offset rather than by the symbol.
However, if we're generating REL LO16 relocations, the offset is split
- between the LO16 and parterning high part relocation. The linker will
+ between the LO16 and partnering high part relocation. The linker will
need to recalculate the complete offset in order to correctly identify
the merge data.
- The linker has traditionally not looked for the parterning high part
+ The linker has traditionally not looked for the partnering high part
relocation, and has thus allowed orphaned R_MIPS_LO16 relocations to be
placed anywhere. Rather than break backwards compatibility by changing
this, it seems better not to force the issue, and instead keep the
R_MICROMIPS_PC16_S1, R_MICROMIPS_PC10_S1 or R_MICROMIPS_PC7_S1)
against MIPS16 or microMIPS symbols because we need to keep the
MIPS16 or microMIPS symbol for the purpose of mode mismatch
- detection and JAL to JALX instruction conversion in the linker.
+ detection and JAL or BAL to JALX instruction conversion in the
+ linker.
For simplicity, we deal with (3)-(4) by not reducing _any_ relocation
against a MIPS16 symbol. We deal with (5) by additionally leaving
if (! RELAX_MIPS16_P (fragp->fr_subtype))
return 0;
- if (mips16_extended_frag (fragp, sec, stretch))
+ if (!mips16_extended_frag (fragp, sec, stretch))
{
- if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ if (RELAX_MIPS16_MACRO (fragp->fr_subtype))
+ {
+ fragp->fr_subtype = RELAX_MIPS16_CLEAR_MACRO (fragp->fr_subtype);
+ return RELAX_MIPS16_E2 (fragp->fr_subtype) ? -6 : -10;
+ }
+ else if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ {
+ fragp->fr_subtype = RELAX_MIPS16_CLEAR_EXTENDED (fragp->fr_subtype);
+ return -2;
+ }
+ else
+ return 0;
+ }
+ else if (!mips16_macro_frag (fragp, sec, stretch))
+ {
+ if (RELAX_MIPS16_MACRO (fragp->fr_subtype))
+ {
+ fragp->fr_subtype = RELAX_MIPS16_CLEAR_MACRO (fragp->fr_subtype);
+ fragp->fr_subtype = RELAX_MIPS16_MARK_EXTENDED (fragp->fr_subtype);
+ return RELAX_MIPS16_E2 (fragp->fr_subtype) ? -4 : -8;
+ }
+ else if (!RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ {
+ fragp->fr_subtype = RELAX_MIPS16_MARK_EXTENDED (fragp->fr_subtype);
+ return 2;
+ }
+ else
return 0;
- fragp->fr_subtype = RELAX_MIPS16_MARK_EXTENDED (fragp->fr_subtype);
- return 2;
}
else
{
- if (! RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ if (RELAX_MIPS16_MACRO (fragp->fr_subtype))
return 0;
- fragp->fr_subtype = RELAX_MIPS16_CLEAR_EXTENDED (fragp->fr_subtype);
- return -2;
+ else if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ {
+ fragp->fr_subtype = RELAX_MIPS16_CLEAR_EXTENDED (fragp->fr_subtype);
+ fragp->fr_subtype = RELAX_MIPS16_MARK_MACRO (fragp->fr_subtype);
+ return RELAX_MIPS16_E2 (fragp->fr_subtype) ? 4 : 8;
+ }
+ else
+ {
+ fragp->fr_subtype = RELAX_MIPS16_MARK_MACRO (fragp->fr_subtype);
+ return RELAX_MIPS16_E2 (fragp->fr_subtype) ? 6 : 10;
+ }
}
return 0;
{
char *buf;
unsigned long insn;
- expressionS exp;
fixS *fixp;
buf = fragp->fr_literal + fragp->fr_fix;
/* We generate a fixup instead of applying it right now
because, if there are linker relaxations, we're going to
need the relocations. */
- exp.X_op = O_symbol;
- exp.X_add_symbol = fragp->fr_symbol;
- exp.X_add_number = fragp->fr_offset;
-
- fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, TRUE,
- BFD_RELOC_16_PCREL_S2);
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 4,
+ fragp->fr_symbol, fragp->fr_offset,
+ TRUE, BFD_RELOC_16_PCREL_S2);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
}
uncond:
- if (mips_pic == NO_PIC)
+ if (!RELAX_BRANCH_PIC (fragp->fr_subtype))
{
/* j or jal. */
insn = (RELAX_BRANCH_LINK (fragp->fr_subtype)
? 0x0c000000 : 0x08000000);
- exp.X_op = O_symbol;
- exp.X_add_symbol = fragp->fr_symbol;
- exp.X_add_number = fragp->fr_offset;
- fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp,
- FALSE, BFD_RELOC_MIPS_JMP);
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 4,
+ fragp->fr_symbol, fragp->fr_offset,
+ FALSE, BFD_RELOC_MIPS_JMP);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
/* lw/ld $at, <sym>($gp) R_MIPS_GOT16 */
insn = HAVE_64BIT_ADDRESSES ? 0xdf800000 : 0x8f800000;
insn |= at << OP_SH_RT;
- exp.X_op = O_symbol;
- exp.X_add_symbol = fragp->fr_symbol;
- exp.X_add_number = fragp->fr_offset;
- if (fragp->fr_offset)
- {
- exp.X_add_symbol = make_expr_symbol (&exp);
- exp.X_add_number = 0;
- }
-
- fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp,
- FALSE, BFD_RELOC_MIPS_GOT16);
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 4,
+ fragp->fr_symbol, fragp->fr_offset,
+ FALSE, BFD_RELOC_MIPS_GOT16);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
insn = HAVE_64BIT_ADDRESSES ? 0x64000000 : 0x24000000;
insn |= at << OP_SH_RS | at << OP_SH_RT;
- fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp,
- FALSE, BFD_RELOC_LO16);
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 4,
+ fragp->fr_symbol, fragp->fr_offset,
+ FALSE, BFD_RELOC_LO16);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
{
char *buf = fragp->fr_literal + fragp->fr_fix;
bfd_boolean compact = RELAX_MICROMIPS_COMPACT (fragp->fr_subtype);
+ bfd_boolean insn32 = RELAX_MICROMIPS_INSN32 (fragp->fr_subtype);
+ bfd_boolean nods = RELAX_MICROMIPS_NODS (fragp->fr_subtype);
+ bfd_boolean pic = RELAX_MICROMIPS_PIC (fragp->fr_subtype);
bfd_boolean al = RELAX_MICROMIPS_LINK (fragp->fr_subtype);
int type = RELAX_MICROMIPS_TYPE (fragp->fr_subtype);
bfd_boolean short_ds;
unsigned long insn;
- expressionS exp;
fixS *fixp;
- exp.X_op = O_symbol;
- exp.X_add_symbol = fragp->fr_symbol;
- exp.X_add_number = fragp->fr_offset;
-
fragp->fr_fix += fragp->fr_var;
/* Handle 16-bit branches that fit or are forced to fit. */
/* We generate a fixup instead of applying it right now,
because if there is linker relaxation, we're going to
need the relocations. */
- if (type == 'D')
- fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 2, &exp, TRUE,
- BFD_RELOC_MICROMIPS_10_PCREL_S1);
- else if (type == 'E')
- fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 2, &exp, TRUE,
- BFD_RELOC_MICROMIPS_7_PCREL_S1);
- else
- abort ();
+ switch (type)
+ {
+ case 'D':
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 2,
+ fragp->fr_symbol, fragp->fr_offset,
+ TRUE, BFD_RELOC_MICROMIPS_10_PCREL_S1);
+ break;
+ case 'E':
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 2,
+ fragp->fr_symbol, fragp->fr_offset,
+ TRUE, BFD_RELOC_MICROMIPS_7_PCREL_S1);
+ break;
+ default:
+ abort ();
+ }
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
/* We generate a fixup instead of applying it right now,
because if there is linker relaxation, we're going to
need the relocations. */
- fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, TRUE,
- BFD_RELOC_MICROMIPS_16_PCREL_S1);
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 4,
+ fragp->fr_symbol, fragp->fr_offset,
+ TRUE, BFD_RELOC_MICROMIPS_16_PCREL_S1);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
if (type == 0)
- return;
+ {
+ insn = read_compressed_insn (buf, 4);
+ buf += 4;
+
+ if (nods)
+ {
+ /* Check the short-delay-slot bit. */
+ if (!al || (insn & 0x02000000) != 0)
+ buf = write_compressed_insn (buf, 0x0c00, 2);
+ else
+ buf = write_compressed_insn (buf, 0x00000000, 4);
+ }
+
+ gas_assert (buf == fragp->fr_literal + fragp->fr_fix);
+ return;
+ }
}
/* Relax 16-bit branches to 32-bit branches. */
|| !RELAX_MICROMIPS_TOOFAR32 (fragp->fr_subtype))
{
buf = write_compressed_insn (buf, insn, 4);
+ if (nods)
+ buf = write_compressed_insn (buf, 0x0c00, 2);
gas_assert (buf == fragp->fr_literal + fragp->fr_fix);
return;
}
_("relaxed out-of-range branch into a jump"));
/* Set the short-delay-slot bit. */
- short_ds = al && (insn & 0x02000000) != 0;
+ short_ds = !al || (insn & 0x02000000) != 0;
if (!RELAX_MICROMIPS_UNCOND (fragp->fr_subtype))
{
/* Branch over the jump. */
buf = write_compressed_insn (buf, insn, 4);
+
if (!compact)
- /* nop */
- buf = write_compressed_insn (buf, 0x0c00, 2);
+ {
+ /* nop */
+ if (insn32)
+ buf = write_compressed_insn (buf, 0x00000000, 4);
+ else
+ buf = write_compressed_insn (buf, 0x0c00, 2);
+ }
}
- if (mips_pic == NO_PIC)
+ if (!pic)
{
- unsigned long jal = short_ds ? 0x74000000 : 0xf4000000; /* jal/s */
+ unsigned long jal = (short_ds || nods
+ ? 0x74000000 : 0xf4000000); /* jal/s */
/* j/jal/jals <sym> R_MICROMIPS_26_S1 */
insn = al ? jal : 0xd4000000;
- fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, FALSE,
- BFD_RELOC_MICROMIPS_JMP);
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 4,
+ fragp->fr_symbol, fragp->fr_offset,
+ FALSE, BFD_RELOC_MICROMIPS_JMP);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
buf = write_compressed_insn (buf, insn, 4);
- if (compact)
- /* nop */
- buf = write_compressed_insn (buf, 0x0c00, 2);
+
+ if (compact || nods)
+ {
+ /* nop */
+ if (insn32)
+ buf = write_compressed_insn (buf, 0x00000000, 4);
+ else
+ buf = write_compressed_insn (buf, 0x0c00, 2);
+ }
}
else
{
unsigned long at = RELAX_MICROMIPS_AT (fragp->fr_subtype);
- unsigned long jalr = short_ds ? 0x45e0 : 0x45c0; /* jalr/s */
- unsigned long jr = compact ? 0x45a0 : 0x4580; /* jr/c */
/* lw/ld $at, <sym>($gp) R_MICROMIPS_GOT16 */
insn = HAVE_64BIT_ADDRESSES ? 0xdc1c0000 : 0xfc1c0000;
insn |= at << MICROMIPSOP_SH_RT;
- if (exp.X_add_number)
- {
- exp.X_add_symbol = make_expr_symbol (&exp);
- exp.X_add_number = 0;
- }
-
- fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, FALSE,
- BFD_RELOC_MICROMIPS_GOT16);
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 4,
+ fragp->fr_symbol, fragp->fr_offset,
+ FALSE, BFD_RELOC_MICROMIPS_GOT16);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
insn = HAVE_64BIT_ADDRESSES ? 0x5c000000 : 0x30000000;
insn |= at << MICROMIPSOP_SH_RT | at << MICROMIPSOP_SH_RS;
- fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, FALSE,
- BFD_RELOC_MICROMIPS_LO16);
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 4,
+ fragp->fr_symbol, fragp->fr_offset,
+ FALSE, BFD_RELOC_MICROMIPS_LO16);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
buf = write_compressed_insn (buf, insn, 4);
- /* jr/jrc/jalr/jalrs $at */
- insn = al ? jalr : jr;
- insn |= at << MICROMIPSOP_SH_MJ;
+ if (insn32)
+ {
+ /* jr/jalr $at */
+ insn = 0x00000f3c | (al ? RA : ZERO) << MICROMIPSOP_SH_RT;
+ insn |= at << MICROMIPSOP_SH_RS;
+
+ buf = write_compressed_insn (buf, insn, 4);
+
+ if (compact || nods)
+ /* nop */
+ buf = write_compressed_insn (buf, 0x00000000, 4);
+ }
+ else
+ {
+ /* jr/jrc/jalr/jalrs $at */
+ unsigned long jalr = short_ds ? 0x45e0 : 0x45c0; /* jalr/s */
+ unsigned long jr = compact || nods ? 0x45a0 : 0x4580; /* jr/c */
+
+ insn = al ? jalr : jr;
+ insn |= at << MICROMIPSOP_SH_MJ;
- buf = write_compressed_insn (buf, insn, 2);
+ buf = write_compressed_insn (buf, insn, 2);
+ if (al && nods)
+ {
+ /* nop */
+ if (short_ds)
+ buf = write_compressed_insn (buf, 0x0c00, 2);
+ else
+ buf = write_compressed_insn (buf, 0x00000000, 4);
+ }
+ }
}
gas_assert (buf == fragp->fr_literal + fragp->fr_fix);
const struct mips_int_operand *operand;
offsetT val;
char *buf;
- unsigned int user_length, length;
+ unsigned int user_length;
+ bfd_boolean need_reloc;
unsigned long insn;
+ bfd_boolean mac;
bfd_boolean ext;
segT symsec;
type = RELAX_MIPS16_TYPE (fragp->fr_subtype);
operand = mips16_immed_operand (type, FALSE);
+ mac = RELAX_MIPS16_MACRO (fragp->fr_subtype);
ext = RELAX_MIPS16_EXTENDED (fragp->fr_subtype);
val = resolve_symbol_value (fragp->fr_symbol) + fragp->fr_offset;
- if (operand->root.type == OP_PCREL)
+
+ symsec = S_GET_SEGMENT (fragp->fr_symbol);
+ need_reloc = (S_FORCE_RELOC (fragp->fr_symbol, TRUE)
+ || (operand->root.type == OP_PCREL && !mac
+ ? asec != symsec
+ : !bfd_is_abs_section (symsec)));
+
+ if (operand->root.type == OP_PCREL && !mac)
{
const struct mips_pcrel_operand *pcrel_op;
- addressT addr;
pcrel_op = (const struct mips_pcrel_operand *) operand;
- addr = fragp->fr_address + fragp->fr_fix;
- /* The rules for the base address of a PC relative reloc are
- complicated; see mips16_extended_frag. */
- if (pcrel_op->include_isa_bit)
+ if (pcrel_op->include_isa_bit && !need_reloc)
{
- addr += 2;
- if (ext)
- addr += 2;
- /* Ignore the low bit in the target, since it will be
- set for a text label. */
- val &= -2;
+ if (!mips_ignore_branch_isa
+ && !ELF_ST_IS_MIPS16 (S_GET_OTHER (fragp->fr_symbol)))
+ as_bad_where (fragp->fr_file, fragp->fr_line,
+ _("branch to a symbol in another ISA mode"));
+ else if ((fragp->fr_offset & 0x1) != 0)
+ as_bad_where (fragp->fr_file, fragp->fr_line,
+ _("branch to misaligned address (0x%lx)"),
+ (long) val);
}
- else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
- addr -= 4;
- else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
- addr -= 2;
- addr &= -(1 << pcrel_op->align_log2);
- val -= addr;
+ val = mips16_pcrel_val (fragp, pcrel_op, val, 0);
/* Make sure the section winds up with the alignment we have
assumed. */
record_alignment (asec, operand->shift);
}
- if (ext
- && (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype)
- || RELAX_MIPS16_DSLOT (fragp->fr_subtype)))
+ if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype)
+ || RELAX_MIPS16_DSLOT (fragp->fr_subtype))
+ {
+ if (mac)
+ as_warn_where (fragp->fr_file, fragp->fr_line,
+ _("macro instruction expanded into multiple "
+ "instructions in a branch delay slot"));
+ else if (ext)
+ as_warn_where (fragp->fr_file, fragp->fr_line,
+ _("extended instruction in a branch delay slot"));
+ }
+ else if (RELAX_MIPS16_NOMACRO (fragp->fr_subtype) && mac)
as_warn_where (fragp->fr_file, fragp->fr_line,
- _("extended instruction in delay slot"));
+ _("macro instruction expanded into multiple "
+ "instructions"));
buf = fragp->fr_literal + fragp->fr_fix;
else
user_length = 0;
- symsec = S_GET_SEGMENT (fragp->fr_symbol);
- if (S_FORCE_RELOC (fragp->fr_symbol, TRUE)
- || (operand->root.type == OP_PCREL
- ? asec != symsec
- : !bfd_is_abs_section (symsec)))
+ if (mac)
{
- bfd_reloc_code_real_type reloc = BFD_RELOC_NONE;
- expressionS exp;
- fixS *fixp;
+ unsigned long reg;
+ unsigned long new;
+ unsigned long op;
+ bfd_boolean e2;
- switch (type)
- {
- case 'p':
- case 'q':
- reloc = BFD_RELOC_MIPS16_16_PCREL_S1;
- break;
- default:
- as_bad_where (fragp->fr_file, fragp->fr_line,
- _("unsupported relocation"));
- break;
- }
- if (reloc != BFD_RELOC_NONE)
+ gas_assert (type == 'A' || type == 'B' || type == 'E');
+ gas_assert (RELAX_MIPS16_SYM32 (fragp->fr_subtype));
+
+ e2 = RELAX_MIPS16_E2 (fragp->fr_subtype);
+
+ if (need_reloc)
{
- gas_assert (ext);
+ fixS *fixp;
- exp.X_op = O_symbol;
- exp.X_add_symbol = fragp->fr_symbol;
- exp.X_add_number = fragp->fr_offset;
+ gas_assert (!RELAX_MIPS16_PIC (fragp->fr_subtype));
- fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 2, &exp,
- TRUE, reloc);
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 4,
+ fragp->fr_symbol, fragp->fr_offset,
+ FALSE, BFD_RELOC_MIPS16_HI16_S);
+ fixp->fx_file = fragp->fr_file;
+ fixp->fx_line = fragp->fr_line;
+ fixp = fix_new (fragp, buf - fragp->fr_literal + (e2 ? 4 : 8), 4,
+ fragp->fr_symbol, fragp->fr_offset,
+ FALSE, BFD_RELOC_MIPS16_LO16);
fixp->fx_file = fragp->fr_file;
fixp->fx_line = fragp->fr_line;
- /* These relocations can have an addend that won't fit
- in 2 octets. */
- fixp->fx_no_overflow = 1;
+ val = 0;
}
+
+ switch (insn & 0xf800)
+ {
+ case 0x0800: /* ADDIU */
+ reg = (insn >> 8) & 0x7;
+ op = 0xf0004800 | (reg << 8);
+ break;
+ case 0xb000: /* LW */
+ reg = (insn >> 8) & 0x7;
+ op = 0xf0009800 | (reg << 8) | (reg << 5);
+ break;
+ case 0xf800: /* I64 */
+ reg = (insn >> 5) & 0x7;
+ switch (insn & 0x0700)
+ {
+ case 0x0400: /* LD */
+ op = 0xf0003800 | (reg << 8) | (reg << 5);
+ break;
+ case 0x0600: /* DADDIU */
+ op = 0xf000fd00 | (reg << 5);
+ break;
+ default:
+ abort ();
+ }
+ break;
+ default:
+ abort ();
+ }
+
+ new = (e2 ? 0xf0006820 : 0xf0006800) | (reg << 8); /* LUI/LI */
+ new |= mips16_immed_extend ((val + 0x8000) >> 16, 16);
+ buf = write_compressed_insn (buf, new, 4);
+ if (!e2)
+ {
+ new = 0xf4003000 | (reg << 8) | (reg << 5); /* SLL */
+ buf = write_compressed_insn (buf, new, 4);
+ }
+ op |= mips16_immed_extend (val, 16);
+ buf = write_compressed_insn (buf, op, 4);
+
+ fragp->fr_fix += e2 ? 8 : 12;
}
else
- mips16_immed (fragp->fr_file, fragp->fr_line, type,
- BFD_RELOC_UNUSED, val, user_length, &insn);
+ {
+ unsigned int length = ext ? 4 : 2;
+
+ if (need_reloc)
+ {
+ bfd_reloc_code_real_type reloc = BFD_RELOC_NONE;
+ fixS *fixp;
- length = (ext ? 4 : 2);
- gas_assert (mips16_opcode_length (insn) == length);
- write_compressed_insn (buf, insn, length);
- fragp->fr_fix += length;
+ switch (type)
+ {
+ case 'p':
+ case 'q':
+ reloc = BFD_RELOC_MIPS16_16_PCREL_S1;
+ break;
+ default:
+ break;
+ }
+ if (mac || reloc == BFD_RELOC_NONE)
+ as_bad_where (fragp->fr_file, fragp->fr_line,
+ _("unsupported relocation"));
+ else if (ext)
+ {
+ fixp = fix_new (fragp, buf - fragp->fr_literal, 4,
+ fragp->fr_symbol, fragp->fr_offset,
+ TRUE, reloc);
+ fixp->fx_file = fragp->fr_file;
+ fixp->fx_line = fragp->fr_line;
+ }
+ else
+ as_bad_where (fragp->fr_file, fragp->fr_line,
+ _("invalid unextended operand value"));
+ }
+ else
+ mips16_immed (fragp->fr_file, fragp->fr_line, type,
+ BFD_RELOC_UNUSED, val, user_length, &insn);
+
+ gas_assert (mips16_opcode_length (insn) == length);
+ write_compressed_insn (buf, insn, length);
+ fragp->fr_fix += length;
+ }
}
else
{
ext_ases |= AFL_ASE_MSA;
if (ase & ASE_XPA)
ext_ases |= AFL_ASE_XPA;
+ if (ase & ASE_MIPS16E2)
+ ext_ases |= file_ase_mips16 ? AFL_ASE_MIPS16E2 : 0;
+ if (ase & ASE_CRC)
+ ext_ases |= AFL_ASE_CRC;
+ if (ase & ASE_GINV)
+ ext_ases |= AFL_ASE_GINV;
+ if (ase & ASE_LOONGSON_MMI)
+ ext_ases |= AFL_ASE_LOONGSON_MMI;
+ if (ase & ASE_LOONGSON_CAM)
+ ext_ases |= AFL_ASE_LOONGSON_CAM;
return ext_ases;
}
else
elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_EABI32;
}
- else if (mips_abi == N32_ABI)
- elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ABI2;
- /* Nothing to do for N64_ABI. */
+ /* Nothing to do for N32_ABI or N64_ABI. */
if (mips_32bitmode)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_32BITMODE;
{
char *filename;
- filename = dwarf2_directive_file (0);
+ filename = dwarf2_directive_filename ();
/* Versions of GCC up to 3.1 start files with a ".file"
directive even for stabs output. Make sure that this
cur_proc_ptr->func_end_sym = exp->X_add_symbol;
}
+#ifdef md_flush_pending_output
+ md_flush_pending_output ();
+#endif
+
/* Generate a .pdr section. */
if (!ECOFF_DEBUGGING && mips_flag_pdr)
{
expressionS exp;
char *fragp;
-#ifdef md_flush_pending_output
- md_flush_pending_output ();
-#endif
-
gas_assert (pdr_seg);
subseg_set (pdr_seg, 0);
{ "r5900", 0, 0, ISA_MIPS3, CPU_R5900 },
/* ST Microelectronics Loongson 2E and 2F cores */
{ "loongson2e", 0, 0, ISA_MIPS3, CPU_LOONGSON_2E },
- { "loongson2f", 0, 0, ISA_MIPS3, CPU_LOONGSON_2F },
+ { "loongson2f", 0, ASE_LOONGSON_MMI, ISA_MIPS3, CPU_LOONGSON_2F },
/* MIPS IV */
{ "r8000", 0, 0, ISA_MIPS4, CPU_R8000 },
{ "1004kf1_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
/* interaptiv is the new name for 1004kf */
{ "interaptiv", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "interaptiv-mr2", 0,
+ ASE_DSP | ASE_EVA | ASE_MT | ASE_MIPS16E2 | ASE_MIPS16E2_MT,
+ ISA_MIPS32R3, CPU_INTERAPTIV_MR2 },
/* M5100 family */
{ "m5100", 0, ASE_MCU, ISA_MIPS32R5, CPU_MIPS32R5 },
{ "m5101", 0, ASE_MCU, ISA_MIPS32R5, CPU_MIPS32R5 },
/* Broadcom SB-1A CPU core */
{ "sb1a", 0, ASE_MIPS3D | ASE_MDMX, ISA_MIPS64, CPU_SB1 },
- { "loongson3a", 0, 0, ISA_MIPS64R2, CPU_LOONGSON_3A },
-
/* MIPS 64 Release 2 */
+ /* Loongson CPU core */
+ { "loongson3a", 0, ASE_LOONGSON_MMI | ASE_LOONGSON_CAM, ISA_MIPS64R2,
+ CPU_LOONGSON_3A },
/* Cavium Networks Octeon CPU core */
{ "octeon", 0, 0, ISA_MIPS64R2, CPU_OCTEON },
-mips16 generate mips16 instructions\n\
-no-mips16 do not generate mips16 instructions\n"));
fprintf (stream, _("\
+-mmips16e2 generate MIPS16e2 instructions\n\
+-mno-mips16e2 do not generate MIPS16e2 instructions\n"));
+ fprintf (stream, _("\
-mmicromips generate microMIPS instructions\n\
-mno-micromips do not generate microMIPS instructions\n"));
fprintf (stream, _("\
-mvirt generate Virtualization instructions\n\
-mno-virt do not generate Virtualization instructions\n"));
fprintf (stream, _("\
+-mcrc generate CRC instructions\n\
+-mno-crc do not generate CRC instructions\n"));
+ fprintf (stream, _("\
+-mginv generate Global INValidate (GINV) instructions\n\
+-mno-ginv do not generate Global INValidate instructions\n"));
+ fprintf (stream, _("\
+-mloongson-mmi generate Loongson MultiMedia extensions Instructions (MMI) instructions\n\
+-mno-loongson-mmi do not generate Loongson MultiMedia extensions Instructions\n"));
+ fprintf (stream, _("\
+-mloongson-cam generate Loongson Content Address Memory (CAM) instructions\n\
+-mno-loongson-cam do not generate Loongson Content Address Memory Instructions\n"));
+ fprintf (stream, _("\
-minsn32 only generate 32-bit microMIPS instructions\n\
-mno-insn32 generate all microMIPS instructions\n"));
fprintf (stream, _("\
-mgp32 use 32-bit GPRs, regardless of the chosen ISA\n\
-mfp32 use 32-bit FPRs, regardless of the chosen ISA\n\
-msym32 assume all symbols have 32-bit values\n\
--O0 remove unneeded NOPs, do not swap branches\n\
--O remove unneeded NOPs and swap branches\n\
+-O0 do not remove unneeded NOPs, do not swap branches\n\
+-O, -O1 remove unneeded NOPs, do not swap branches\n\
+-O2 remove unneeded NOPs and swap branches\n\
--trap, --no-break trap exception on div by 0 and mult overflow\n\
--break, --no-trap break exception on div by 0 and mult overflow\n"));
fprintf (stream, _("\
-mdouble-float allow 32-bit and 64-bit floating-point operations\n\
--[no-]construct-floats [dis]allow floating point values to be constructed\n\
--[no-]relax-branch [dis]allow out-of-range branches to be relaxed\n\
+-mignore-branch-isa accept invalid branches requiring an ISA mode switch\n\
+-mno-ignore-branch-isa reject invalid branches requiring an ISA mode switch\n\
-mnan=ENCODING select an IEEE 754 NaN encoding convention, either of:\n"));
first = 1;
fputc ('\n', stream);
fprintf (stream, _("\
--32 create o32 ABI object file (default)\n\
--n32 create n32 ABI object file\n\
--64 create 64 ABI object file\n"));
+-32 create o32 ABI object file%s\n"),
+ MIPS_DEFAULT_ABI == O32_ABI ? _(" (default)") : "");
+ fprintf (stream, _("\
+-n32 create n32 ABI object file%s\n"),
+ MIPS_DEFAULT_ABI == N32_ABI ? _(" (default)") : "");
+ fprintf (stream, _("\
+-64 create 64 ABI object file%s\n"),
+ MIPS_DEFAULT_ABI == N64_ABI ? _(" (default)") : "");
}
#ifdef TE_IRIX