/* tc-mips.c -- assemble code for a MIPS chip.
- Copyright (C) 1993 Free Software Foundation, Inc.
+ Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+ Free Software Foundation, Inc.
Contributed by the OSF and Ralph Campbell.
Written by Keith Knowles and Ralph Campbell, working independently.
Modified for ECOFF and R4000 support by Ian Lance Taylor of Cygnus
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
#include "as.h"
#include "config.h"
#include <ctype.h>
-#ifndef __STDC__
-#ifndef NO_STDARG
-#define NO_STDARG
+#ifdef USE_STDARG
+#include <stdarg.h>
#endif
+#ifdef USE_VARARGS
+#include <varargs.h>
#endif
-#ifndef NO_STDARG
-#include <stdarg.h>
+#include "opcode/mips.h"
+#include "itbl-ops.h"
+
+#ifdef DEBUG
+#define DBG(x) printf x
#else
-#ifndef NO_VARARGS
-#include <varargs.h>
-#endif /* NO_VARARGS */
-#endif /* NO_STDARG */
+#define DBG(x)
+#endif
-#include "opcode/mips.h"
+#ifdef OBJ_MAYBE_ELF
+/* Clean up namespace so we can include obj-elf.h too. */
+static int mips_output_flavor PARAMS ((void));
+static int mips_output_flavor () { return OUTPUT_FLAVOR; }
+#undef OBJ_PROCESS_STAB
+#undef OUTPUT_FLAVOR
+#undef S_GET_ALIGN
+#undef S_GET_SIZE
+#undef S_SET_ALIGN
+#undef S_SET_SIZE
+#undef obj_frob_file
+#undef obj_frob_file_after_relocs
+#undef obj_frob_symbol
+#undef obj_pop_insert
+#undef obj_sec_sym_ok_for_reloc
+#undef OBJ_COPY_SYMBOL_ATTRIBUTES
+
+#include "obj-elf.h"
+/* Fix any of them that we actually care about. */
+#undef OUTPUT_FLAVOR
+#define OUTPUT_FLAVOR mips_output_flavor()
+#endif
-#ifdef OBJ_ELF
+#if defined (OBJ_ELF)
#include "elf/mips.h"
+#endif
+
+#ifndef ECOFF_DEBUGGING
+#define NO_ECOFF_DEBUGGING
+#define ECOFF_DEBUGGING 0
+#endif
+#include "ecoff.h"
+
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
static char *mips_regmask_frag;
#endif
#define AT 1
+#define TREG 24
#define PIC_CALL_REG 25
+#define KT0 26
+#define KT1 27
#define GP 28
#define SP 29
#define FP 30
#define RA 31
-/* Decide whether to do GP reference optimizations based on the object
- file format. */
-#undef GPOPT
-#ifdef OBJ_ECOFF
-#define GPOPT
-#endif
-#ifdef OBJ_ELF
-#define GPOPT
+#define ILLEGAL_REG (32)
+
+/* Allow override of standard little-endian ECOFF format. */
+
+#ifndef ECOFF_LITTLE_FORMAT
+#define ECOFF_LITTLE_FORMAT "ecoff-littlemips"
#endif
+extern int target_big_endian;
+
+/* 1 is we should use the 64 bit MIPS ELF ABI, 0 if we should use the
+ 32 bit ABI. This has no meaning for ECOFF.
+ Note that the default is always 32 bit, even if "configured" for
+ 64 bit [e.g. --target=mips64-elf]. */
+static int mips_64;
+
/* The default target format to use. */
-#ifdef OBJ_AOUT
-#ifdef TARGET_BYTES_BIG_ENDIAN
-#define DEFAULT_TARGET_FORMAT "a.out-mips-big"
-#else
-#define DEFAULT_TARGET_FORMAT "a.out-mips-little"
-#endif
-#endif /* OBJ_AOUT */
-#ifdef OBJ_ECOFF
-#ifdef TARGET_BYTES_BIG_ENDIAN
-#define DEFAULT_TARGET_FORMAT "ecoff-bigmips"
-#else
-#define DEFAULT_TARGET_FORMAT "ecoff-littlemips"
-#endif
-#endif /* OBJ_ECOFF */
-#ifdef OBJ_ELF
-#ifdef TARGET_BYTES_BIG_ENDIAN
-#define DEFAULT_TARGET_FORMAT "elf32-bigmips"
+
+const char *
+mips_target_format ()
+{
+ switch (OUTPUT_FLAVOR)
+ {
+ case bfd_target_aout_flavour:
+ return target_big_endian ? "a.out-mips-big" : "a.out-mips-little";
+ case bfd_target_ecoff_flavour:
+ return target_big_endian ? "ecoff-bigmips" : ECOFF_LITTLE_FORMAT;
+ case bfd_target_coff_flavour:
+ return "pe-mips";
+ case bfd_target_elf_flavour:
+#ifdef TE_TMIPS
+ /* This is traditional mips */
+ return (target_big_endian
+ ? "elf32-tradbigmips" : "elf32-tradlittlemips");
#else
-#define DEFAULT_TARGET_FORMAT "elf32-littlemips"
+ return (target_big_endian
+ ? (mips_64 ? "elf64-bigmips" : "elf32-bigmips")
+ : (mips_64 ? "elf64-littlemips" : "elf32-littlemips"));
#endif
-#endif /* OBJ_ELF */
-
-const char *mips_target_format = DEFAULT_TARGET_FORMAT;
+ default:
+ abort ();
+ return NULL;
+ }
+}
/* The name of the readonly data section. */
-#ifdef OBJ_AOUT
-#define RDATA_SECTION_NAME ".data"
-#endif
-#ifdef OBJ_ECOFF
-#define RDATA_SECTION_NAME ".rdata"
-#endif
-#ifdef OBJ_ELF
-#define RDATA_SECTION_NAME ".rodata"
-#endif
+#define RDATA_SECTION_NAME (OUTPUT_FLAVOR == bfd_target_aout_flavour \
+ ? ".data" \
+ : OUTPUT_FLAVOR == bfd_target_ecoff_flavour \
+ ? ".rdata" \
+ : OUTPUT_FLAVOR == bfd_target_coff_flavour \
+ ? ".rdata" \
+ : OUTPUT_FLAVOR == bfd_target_elf_flavour \
+ ? ".rodata" \
+ : (abort (), ""))
+
+/* This is the set of options which may be modified by the .set
+ pseudo-op. We use a struct so that .set push and .set pop are more
+ reliable. */
+
+struct mips_set_options
+{
+ /* MIPS ISA (Instruction Set Architecture) level. This is set to -1
+ if it has not been initialized. Changed by `.set mipsN', and the
+ -mipsN command line option, and the default CPU. */
+ int isa;
+ /* Whether we are assembling for the mips16 processor. 0 if we are
+ not, 1 if we are, and -1 if the value has not been initialized.
+ Changed by `.set mips16' and `.set nomips16', and the -mips16 and
+ -nomips16 command line options, and the default CPU. */
+ int mips16;
+ /* Non-zero if we should not reorder instructions. Changed by `.set
+ reorder' and `.set noreorder'. */
+ int noreorder;
+ /* Non-zero if we should not permit the $at ($1) register to be used
+ in instructions. Changed by `.set at' and `.set noat'. */
+ int noat;
+ /* Non-zero if we should warn when a macro instruction expands into
+ more than one machine instruction. Changed by `.set nomacro' and
+ `.set macro'. */
+ int warn_about_macros;
+ /* Non-zero if we should not move instructions. Changed by `.set
+ move', `.set volatile', `.set nomove', and `.set novolatile'. */
+ int nomove;
+ /* Non-zero if we should not optimize branches by moving the target
+ of the branch into the delay slot. Actually, we don't perform
+ this optimization anyhow. Changed by `.set bopt' and `.set
+ nobopt'. */
+ int nobopt;
+ /* Non-zero if we should not autoextend mips16 instructions.
+ Changed by `.set autoextend' and `.set noautoextend'. */
+ int noautoextend;
+};
+
+/* This is the struct we use to hold the current set of options. Note
+ that we must set the isa field to ISA_UNKNOWN and the mips16 field to
+ -1 to indicate that they have not been initialized. */
+
+static struct mips_set_options mips_opts =
+{
+ ISA_UNKNOWN, -1, 0, 0, 0, 0, 0, 0
+};
/* These variables are filled in with the masks of registers used.
The object format code reads them and puts them in the appropriate
unsigned long mips_gprmask;
unsigned long mips_cprmask[4];
-/* MIPS ISA (Instruction Set Architecture) level (may be changed
- temporarily using .set mipsN). */
-static int mips_isa = -1;
-
/* MIPS ISA we are using for this output file. */
-static int file_mips_isa;
-
-/* The CPU type as a number: 2000, 3000, 4000, 4400, etc. */
-static int mips_cpu = -1;
+static int file_mips_isa = ISA_UNKNOWN;
+
+/* The CPU type we are using for this output file. */
+static int mips_cpu = CPU_UNKNOWN;
+
+/* The argument of the -mabi= flag. */
+static char * mips_abi_string = 0;
+
+/* Wether we should mark the file EABI64 or EABI32. */
+static int mips_eabi64 = 0;
+
+/* If they asked for mips1 or mips2 and a cpu that is
+ mips3 or greater, then mark the object file 32BITMODE. */
+static int mips_32bitmode = 0;
+
+/* True if -mgp32 was passed. */
+static int mips_gp32 = 0;
+
+/* Some ISA's have delay slots for instructions which read or write
+ from a coprocessor (eg. mips1-mips3); some don't (eg mips4).
+ Return true if instructions marked INSN_LOAD_COPROC_DELAY,
+ INSN_COPROC_MOVE_DELAY, or INSN_WRITE_COND_CODE actually have a
+ delay slot in this ISA. The uses of this macro assume that any
+ ISA that has delay slots for one of these, has them for all. They
+ also assume that ISAs which don't have delays for these insns, don't
+ have delays for the INSN_LOAD_MEMORY_DELAY instructions either. */
+#define ISA_HAS_COPROC_DELAYS(ISA) ( \
+ (ISA) == ISA_MIPS1 \
+ || (ISA) == ISA_MIPS2 \
+ || (ISA) == ISA_MIPS3 \
+ )
+
+/* Return true if ISA supports 64 bit gp register instructions. */
+#define ISA_HAS_64BIT_REGS(ISA) ( \
+ (ISA) == ISA_MIPS3 \
+ || (ISA) == ISA_MIPS4 \
+ || (ISA) == ISA_MIPS5 \
+ || (ISA) == ISA_MIPS32 \
+ )
+
+/* Whether the processor uses hardware interlocks to protect
+ reads from the HI and LO registers, and thus does not
+ require nops to be inserted.
+
+ FIXME: GCC makes a distinction between -mcpu=FOO and -mFOO:
+ -mcpu=FOO schedules for FOO, but still produces code that meets the
+ requirements of MIPS ISA I. For example, it won't generate any
+ FOO-specific instructions, and it will still assume that any
+ scheduling hazards described in MIPS ISA I are there, even if FOO
+ has interlocks. -mFOO gives GCC permission to generate code that
+ will only run on a FOO; it will generate FOO-specific instructions,
+ and assume interlocks provided by a FOO.
+
+ However, GAS currently doesn't make this distinction; before Jan 28
+ 1999, GAS's -mcpu=FOO implied -mFOO, which violates GCC's
+ assumptions. The GCC driver passes these flags through to GAS, so
+ if GAS actually does anything that doesn't meet MIPS ISA I with
+ -mFOO, then GCC's -mcpu=FOO flag isn't going to work.
+
+ And furthermore, it did not assume that -mFOO implied -mcpu=FOO,
+ which seems senseless --- why generate code which will only run on
+ a FOO, but schedule for something else?
+
+ So now, at least, -mcpu=FOO and -mFOO are exactly equivalent.
+
+ -- Jim Blandy <jimb@cygnus.com> */
+
+#define hilo_interlocks (mips_cpu == CPU_R4010 \
+ )
+
+/* Whether the processor uses hardware interlocks to protect reads
+ from the GPRs, and thus does not require nops to be inserted. */
+#define gpr_interlocks \
+ (mips_opts.isa != ISA_MIPS1 \
+ || mips_cpu == CPU_R3900)
+
+/* As with other "interlocks" this is used by hardware that has FP
+ (co-processor) interlocks. */
+/* Itbl support may require additional care here. */
+#define cop_interlocks (mips_cpu == CPU_R4300 \
+ )
+
+/* Is this a mfhi or mflo instruction? */
+#define MF_HILO_INSN(PINFO) \
+ ((PINFO & INSN_READ_HI) || (PINFO & INSN_READ_LO))
/* MIPS PIC level. */
static enum mips_pic_level mips_pic;
+/* 1 if we should generate 32 bit offsets from the GP register in
+ SVR4_PIC mode. Currently has no meaning in other modes. */
+static int mips_big_got;
+
/* 1 if trap instructions should used for overflow rather than break
instructions. */
static int mips_trap;
-static int mips_warn_about_macros;
-static int mips_noreorder;
+/* 1 if double width floating point constants should not be constructed
+ by a assembling two single width halves into two single width floating
+ point registers which just happen to alias the double width destination
+ register. On some architectures this aliasing can be disabled by a bit
+ in the status register, and the setting of this bit cannot be determined
+ automatically at assemble time. */
+static int mips_disable_float_construction;
+
+/* Non-zero if any .set noreorder directives were used. */
+
static int mips_any_noreorder;
-static int mips_nomove;
-static int mips_noat;
-static int mips_nobopt;
-#ifdef GPOPT
+/* Non-zero if nops should be inserted when the register referenced in
+ an mfhi/mflo instruction is read in the next two instructions. */
+static int mips_7000_hilo_fix;
+
/* The size of the small data section. */
-static int g_switch_value = 8;
+static unsigned int g_switch_value = 8;
/* Whether the -G option was used. */
static int g_switch_seen = 0;
-#endif
#define N_RMASK 0xc4
#define N_VFP 0xd4
+/* If we can determine in advance that GP optimization won't be
+ possible, we can skip the relaxation stuff that tries to produce
+ GP-relative references. This makes delay slot optimization work
+ better.
+
+ This function can only provide a guess, but it seems to work for
+ gcc output. It needs to guess right for gcc, otherwise gcc
+ will put what it thinks is a GP-relative instruction in a branch
+ delay slot.
+
+ I don't know if a fix is needed for the SVR4_PIC mode. I've only
+ fixed it for the non-PIC mode. KR 95/04/07 */
+static int nopic_need_relax PARAMS ((symbolS *, int));
+
/* handle of the OPCODE hash table */
static struct hash_control *op_hash = NULL;
+/* The opcode hash table we use for the mips16. */
+static struct hash_control *mips16_op_hash = NULL;
+
/* This array holds the chars that always start a comment. If the
pre-processor is disabled, these aren't very useful */
const char comment_chars[] = "#";
.line and .file directives will appear in the pre-processed output */
/* Note that input_file.c hand checks for '#' at the beginning of the
first line of the input file. This is because the compiler outputs
- #NO_APP at the beginning of its output. */
+ #NO_APP at the beginning of its output. */
/* Also note that C style comments are always supported. */
const char line_comment_chars[] = "#";
-/* This array holds machine specific line separator characters. */
-const char line_separator_chars[] = "";
+/* This array holds machine specific line separator characters. */
+const char line_separator_chars[] = ";";
/* Chars that can be used to separate mant from exp in floating point nums */
const char EXP_CHARS[] = "eE";
static char *insn_error;
-static int byte_order = BYTE_ORDER;
-
static int auto_align = 1;
-/* Symbol labelling the current insn. */
-static symbolS *insn_label;
-
/* When outputting SVR4 PIC code, the assembler needs to know the
offset in the stack frame from which to restore the $gp register.
This is set by the .cprestore pseudo-op, and saved in this
insert NOPs. */
static int mips_optimize = 2;
+/* Debugging level. -g sets this to 2. -gN sets this to N. -g0 is
+ equivalent to seeing no -g option at all. */
+static int mips_debug = 0;
+
/* The previous instruction. */
static struct mips_cl_insn prev_insn;
/* If we don't want information for prev_insn or prev_prev_insn, we
point the insn_mo field at this dummy integer. */
-static const struct mips_opcode dummy_opcode = { 0 };
+static const struct mips_opcode dummy_opcode = { NULL, NULL, 0, 0, 0, 0 };
/* Non-zero if prev_insn is valid. */
static int prev_insn_valid;
/* The offset into prev_insn_frag for the previous instruction. */
static long prev_insn_where;
+/* The reloc type for the previous instruction, if any. */
+static bfd_reloc_code_real_type prev_insn_reloc_type;
+
/* The reloc for the previous instruction, if any. */
static fixS *prev_insn_fixp;
/* Non-zero if the previous instruction was in a .set noreorder. */
static int prev_insn_unreordered;
+/* Non-zero if the previous instruction uses an extend opcode (if
+ mips16). */
+static int prev_insn_extended;
+
/* Non-zero if the previous previous instruction was in a .set
noreorder. */
static int prev_prev_insn_unreordered;
+
+/* If this is set, it points to a frag holding nop instructions which
+ were inserted before the start of a noreorder section. If those
+ nops turn out to be unnecessary, the size of the frag can be
+ decreased. */
+static fragS *prev_nop_frag;
+
+/* The number of nop instructions we created in prev_nop_frag. */
+static int prev_nop_frag_holds;
+
+/* The number of nop instructions that we know we need in
+ prev_nop_frag. */
+static int prev_nop_frag_required;
+
+/* The number of instructions we've seen since prev_nop_frag. */
+static int prev_nop_frag_since;
+
+/* For ECOFF and ELF, relocations against symbols are done in two
+ parts, with a HI relocation and a LO relocation. Each relocation
+ has only 16 bits of space to store an addend. This means that in
+ order for the linker to handle carries correctly, it must be able
+ to locate both the HI and the LO relocation. This means that the
+ relocations must appear in order in the relocation table.
+
+ In order to implement this, we keep track of each unmatched HI
+ relocation. We then sort them so that they immediately precede the
+ corresponding LO relocation. */
+
+struct mips_hi_fixup
+{
+ /* Next HI fixup. */
+ struct mips_hi_fixup *next;
+ /* This fixup. */
+ fixS *fixp;
+ /* The section this fixup is in. */
+ segT seg;
+};
+
+/* The list of unmatched HI relocs. */
+
+static struct mips_hi_fixup *mips_hi_fixup_list;
+
+/* Map normal MIPS register numbers to mips16 register numbers. */
+
+#define X ILLEGAL_REG
+static const int mips32_to_16_reg_map[] =
+{
+ X, X, 2, 3, 4, 5, 6, 7,
+ X, X, X, X, X, X, X, X,
+ 0, 1, X, X, X, X, X, X,
+ X, X, X, X, X, X, X, X
+};
+#undef X
+
+/* Map mips16 register numbers to normal MIPS register numbers. */
+
+static const unsigned int mips16_to_32_reg_map[] =
+{
+ 16, 17, 2, 3, 4, 5, 6, 7
+};
\f
/* Since the MIPS does not have multiple forms of PC relative
instructions, we do not have to do relaxing as is done on other
one if needed. */
#define RELAX_ENCODE(old, new, reloc1, reloc2, reloc3, warn) \
((relax_substateT) \
- (((old) << 24) \
+ (((old) << 23) \
| ((new) << 16) \
| (((reloc1) + 64) << 9) \
| (((reloc2) + 64) << 2) \
| ((reloc3) ? (1 << 1) : 0) \
| ((warn) ? 1 : 0)))
-#define RELAX_OLD(i) (((i) >> 24) & 0xff)
-#define RELAX_NEW(i) (((i) >> 16) & 0xff)
-#define RELAX_RELOC1(i) ((((i) >> 9) & 0x7f) - 64)
-#define RELAX_RELOC2(i) ((((i) >> 2) & 0x7f) - 64)
+#define RELAX_OLD(i) (((i) >> 23) & 0x7f)
+#define RELAX_NEW(i) (((i) >> 16) & 0x7f)
+#define RELAX_RELOC1(i) ((bfd_vma) (((i) >> 9) & 0x7f) - 64)
+#define RELAX_RELOC2(i) ((bfd_vma) (((i) >> 2) & 0x7f) - 64)
#define RELAX_RELOC3(i) (((i) >> 1) & 1)
#define RELAX_WARN(i) ((i) & 1)
+
+/* For mips16 code, we use an entirely different form of relaxation.
+ mips16 supports two versions of most instructions which take
+ immediate values: a small one which takes some small value, and a
+ larger one which takes a 16 bit value. Since branches also follow
+ this pattern, relaxing these values is required.
+
+ We can assemble both mips16 and normal MIPS code in a single
+ object. Therefore, we need to support this type of relaxation at
+ the same time that we support the relaxation described above. We
+ use the high bit of the subtype field to distinguish these cases.
+
+ The information we store for this type of relaxation is the
+ argument code found in the opcode file for this relocation, whether
+ the user explicitly requested a small or extended form, and whether
+ the relocation is in a jump or jal delay slot. That tells us the
+ size of the value, and how it should be stored. We also store
+ whether the fragment is considered to be extended or not. We also
+ store whether this is known to be a branch to a different section,
+ whether we have tried to relax this frag yet, and whether we have
+ ever extended a PC relative fragment because of a shift count. */
+#define RELAX_MIPS16_ENCODE(type, small, ext, dslot, jal_dslot) \
+ (0x80000000 \
+ | ((type) & 0xff) \
+ | ((small) ? 0x100 : 0) \
+ | ((ext) ? 0x200 : 0) \
+ | ((dslot) ? 0x400 : 0) \
+ | ((jal_dslot) ? 0x800 : 0))
+#define RELAX_MIPS16_P(i) (((i) & 0x80000000) != 0)
+#define RELAX_MIPS16_TYPE(i) ((i) & 0xff)
+#define RELAX_MIPS16_USER_SMALL(i) (((i) & 0x100) != 0)
+#define RELAX_MIPS16_USER_EXT(i) (((i) & 0x200) != 0)
+#define RELAX_MIPS16_DSLOT(i) (((i) & 0x400) != 0)
+#define RELAX_MIPS16_JAL_DSLOT(i) (((i) & 0x800) != 0)
+#define RELAX_MIPS16_EXTENDED(i) (((i) & 0x1000) != 0)
+#define RELAX_MIPS16_MARK_EXTENDED(i) ((i) | 0x1000)
+#define RELAX_MIPS16_CLEAR_EXTENDED(i) ((i) &~ 0x1000)
+#define RELAX_MIPS16_LONG_BRANCH(i) (((i) & 0x2000) != 0)
+#define RELAX_MIPS16_MARK_LONG_BRANCH(i) ((i) | 0x2000)
+#define RELAX_MIPS16_CLEAR_LONG_BRANCH(i) ((i) &~ 0x2000)
\f
/* Prototypes for static functions. */
#ifdef __STDC__
#define internalError() \
- as_fatal ("internal Error, line %d, %s", __LINE__, __FILE__)
+ as_fatal (_("internal Error, line %d, %s"), __LINE__, __FILE__)
#else
-#define internalError() as_fatal ("MIPS internal Error");
+#define internalError() as_fatal (_("MIPS internal Error"));
#endif
+enum mips_regclass { MIPS_GR_REG, MIPS_FP_REG, MIPS16_REG };
+
static int insn_uses_reg PARAMS ((struct mips_cl_insn *ip,
- unsigned int reg, int fpr));
+ unsigned int reg, enum mips_regclass class));
+static int reg_needs_delay PARAMS ((unsigned int));
+static void mips16_mark_labels PARAMS ((void));
static void append_insn PARAMS ((char *place,
struct mips_cl_insn * ip,
expressionS * p,
- bfd_reloc_code_real_type r));
-static void mips_no_prev_insn PARAMS ((void));
-static void mips_emit_delays PARAMS ((void));
+ bfd_reloc_code_real_type r,
+ boolean));
+static void mips_no_prev_insn PARAMS ((int));
+static void mips_emit_delays PARAMS ((boolean));
+#ifdef USE_STDARG
static void macro_build PARAMS ((char *place, int *counter, expressionS * ep,
const char *name, const char *fmt,
...));
+#else
+static void macro_build ();
+#endif
+static void mips16_macro_build PARAMS ((char *, int *, expressionS *,
+ const char *, const char *,
+ va_list));
static void macro_build_lui PARAMS ((char *place, int *counter,
expressionS * ep, int regnum));
static void set_at PARAMS ((int *counter, int reg, int unsignedp));
static void check_absolute_expr PARAMS ((struct mips_cl_insn * ip,
expressionS *));
-static void load_register PARAMS ((int *counter, int reg, expressionS * ep));
+static void load_register PARAMS ((int *, int, expressionS *, int));
static void load_address PARAMS ((int *counter, int reg, expressionS *ep));
static void macro PARAMS ((struct mips_cl_insn * ip));
+static void mips16_macro PARAMS ((struct mips_cl_insn * ip));
#ifdef LOSING_COMPILER
static void macro2 PARAMS ((struct mips_cl_insn * ip));
#endif
static void mips_ip PARAMS ((char *str, struct mips_cl_insn * ip));
+static void mips16_ip PARAMS ((char *str, struct mips_cl_insn * ip));
+static void mips16_immed PARAMS ((char *, unsigned int, int, offsetT, boolean,
+ boolean, boolean, unsigned long *,
+ boolean *, unsigned short *));
static int my_getSmallExpression PARAMS ((expressionS * ep, char *str));
static void my_getExpression PARAMS ((expressionS * ep, char *str));
static symbolS *get_symbol PARAMS ((void));
static void mips_align PARAMS ((int to, int fill, symbolS *label));
static void s_align PARAMS ((int));
-static void s_stringer PARAMS ((int));
static void s_change_sec PARAMS ((int));
static void s_cons PARAMS ((int));
-static void s_err PARAMS ((int));
-static void s_extern PARAMS ((int));
static void s_float_cons PARAMS ((int));
static void s_mips_globl PARAMS ((int));
static void s_option PARAMS ((int));
static void s_mipsset PARAMS ((int));
-static void s_mips_space PARAMS ((int));
static void s_abicalls PARAMS ((int));
static void s_cpload PARAMS ((int));
static void s_cprestore PARAMS ((int));
static void s_gpword PARAMS ((int));
static void s_cpadd PARAMS ((int));
-#ifndef ECOFF_DEBUGGING
+static void s_insn PARAMS ((int));
static void md_obj_begin PARAMS ((void));
static void md_obj_end PARAMS ((void));
static long get_number PARAMS ((void));
-static void s_ent PARAMS ((int));
-static void s_mipsend PARAMS ((int));
+static void s_mips_ent PARAMS ((int));
+static void s_mips_end PARAMS ((int));
+static void s_mips_frame PARAMS ((int));
+static void s_mips_mask PARAMS ((int));
+static void s_mips_stab PARAMS ((int));
+static void s_mips_weakext PARAMS ((int));
static void s_file PARAMS ((int));
-#if 0
-static void s_frame PARAMS ((int));
-static void s_loc PARAMS ((int));
-static void s_mask PARAMS ((char));
-#endif
-#endif
-#ifdef OBJ_ELF
-static void s_elf_section PARAMS ((int));
-#endif
+static int mips16_extended_frag PARAMS ((fragS *, asection *, long));
+static const char *mips_isa_to_str PARAMS ((int));
+static const char *mips_cpu_to_str PARAMS ((int));
+static int validate_mips_insn PARAMS ((const struct mips_opcode *));
+
+/* Table and functions used to map between CPU/ISA names, and
+ ISA levels, and CPU numbers. */
+
+struct mips_cpu_info
+{
+ const char *name; /* CPU or ISA name. */
+ int is_isa; /* Is this an ISA? (If 0, a CPU.) */
+ int isa; /* ISA level. */
+ int cpu; /* CPU number (default CPU if ISA). */
+};
+
+static const struct mips_cpu_info *mips_cpu_info_from_name PARAMS ((const char *));
+static const struct mips_cpu_info *mips_cpu_info_from_isa PARAMS ((int));
+static const struct mips_cpu_info *mips_cpu_info_from_cpu PARAMS ((int));
\f
/* Pseudo-op table.
not MIPS CPU specific, but are also not specific to the object file
format. This file is probably the best place to define them, but
they are not currently supported: .asm0, .endr, .lab, .repeat,
- .struct, .weakext. */
+ .struct. */
-const pseudo_typeS md_pseudo_table[] =
+static const pseudo_typeS mips_pseudo_table[] =
{
- /* MIPS specific pseudo-ops. */
+ /* MIPS specific pseudo-ops. */
{"option", s_option, 0},
{"set", s_mipsset, 0},
{"rdata", s_change_sec, 'r'},
{"sdata", s_change_sec, 's'},
{"livereg", s_ignore, 0},
- { "abicalls", s_abicalls, 0},
- { "cpload", s_cpload, 0},
- { "cprestore", s_cprestore, 0},
- { "gpword", s_gpword, 0},
- { "cpadd", s_cpadd, 0},
-
- /* Relatively generic pseudo-ops that happen to be used on MIPS
+ {"abicalls", s_abicalls, 0},
+ {"cpload", s_cpload, 0},
+ {"cprestore", s_cprestore, 0},
+ {"gpword", s_gpword, 0},
+ {"cpadd", s_cpadd, 0},
+ {"insn", s_insn, 0},
+
+ /* Relatively generic pseudo-ops that happen to be used on MIPS
chips. */
- {"asciiz", s_stringer, 1},
+ {"asciiz", stringer, 1},
{"bss", s_change_sec, 'b'},
{"err", s_err, 0},
{"half", s_cons, 1},
{"dword", s_cons, 3},
+ {"weakext", s_mips_weakext, 0},
- /* These pseudo-ops are defined in read.c, but must be overridden
+ /* These pseudo-ops are defined in read.c, but must be overridden
here for one reason or another. */
{"align", s_align, 0},
- {"ascii", s_stringer, 0},
- {"asciz", s_stringer, 1},
{"byte", s_cons, 0},
{"data", s_change_sec, 'd'},
{"double", s_float_cons, 'd'},
- {"extern", s_extern, 0},
{"float", s_float_cons, 'f'},
{"globl", s_mips_globl, 0},
{"global", s_mips_globl, 0},
{"quad", s_cons, 3},
{"short", s_cons, 1},
{"single", s_float_cons, 'f'},
- {"space", s_mips_space, 0},
+ {"stabn", s_mips_stab, 'n'},
{"text", s_change_sec, 't'},
{"word", s_cons, 2},
+ { NULL, NULL, 0 },
+};
-#ifndef ECOFF_DEBUGGING
- /* These pseudo-ops should be defined by the object file format.
- However, a.out doesn't support them, so we have versions here. */
- {"aent", s_ent, 1},
+static const pseudo_typeS mips_nonecoff_pseudo_table[] =
+{
+ /* These pseudo-ops should be defined by the object file format.
+ However, a.out doesn't support them, so we have versions here. */
+ {"aent", s_mips_ent, 1},
{"bgnb", s_ignore, 0},
- {"end", s_mipsend, 0},
+ {"end", s_mips_end, 0},
{"endb", s_ignore, 0},
- {"ent", s_ent, 0},
+ {"ent", s_mips_ent, 0},
{"file", s_file, 0},
- {"fmask", s_ignore, 'F'},
- {"frame", s_ignore, 0},
+ {"fmask", s_mips_mask, 'F'},
+ {"frame", s_mips_frame, 0},
{"loc", s_ignore, 0},
- {"mask", s_ignore, 'R'},
+ {"mask", s_mips_mask, 'R'},
{"verstamp", s_ignore, 0},
-#endif
+ { NULL, NULL, 0 },
+};
-#ifdef OBJ_ELF
- /* We need to tweak the ELF ".section" pseudo-op a bit. */
- {"section", s_elf_section, 0},
-#endif
+extern void pop_insert PARAMS ((const pseudo_typeS *));
- /* Sentinel. */
- {NULL}
-};
+void
+mips_pop_insert ()
+{
+ pop_insert (mips_pseudo_table);
+ if (! ECOFF_DEBUGGING)
+ pop_insert (mips_nonecoff_pseudo_table);
+}
\f
-const relax_typeS md_relax_table[] =
+/* Symbols labelling the current insn. */
+
+struct insn_label_list
{
- { 0 }
+ struct insn_label_list *next;
+ symbolS *label;
};
+static struct insn_label_list *insn_labels;
+static struct insn_label_list *free_insn_labels;
+
+static void mips_clear_insn_labels PARAMS ((void));
+
+static inline void
+mips_clear_insn_labels ()
+{
+ register struct insn_label_list **pl;
+
+ for (pl = &free_insn_labels; *pl != NULL; pl = &(*pl)->next)
+ ;
+ *pl = insn_labels;
+ insn_labels = NULL;
+}
+\f
static char *expr_end;
+/* Expressions which appear in instructions. These are set by
+ mips_ip. */
+
static expressionS imm_expr;
static expressionS offset_expr;
+
+/* Relocs associated with imm_expr and offset_expr. */
+
static bfd_reloc_code_real_type imm_reloc;
static bfd_reloc_code_real_type offset_reloc;
-/* FIXME: This should be handled in a different way. */
-extern int target_big_endian;
+/* This is set by mips_ip if imm_reloc is an unmatched HI16_S reloc. */
+
+static boolean imm_unmatched_hi;
+
+/* These are set by mips16_ip if an explicit extension is used. */
+
+static boolean mips16_small, mips16_ext;
+
+#ifdef MIPS_STABS_ELF
+/* The pdr segment for per procedure frame/regmask info */
+
+static segT pdr_seg;
+#endif
+
+static const char *
+mips_isa_to_str (isa)
+ int isa;
+{
+ const struct mips_cpu_info *ci;
+ static char s[20];
+
+ ci = mips_cpu_info_from_isa (isa);
+ if (ci != NULL)
+ return (ci->name);
+
+ sprintf (s, "ISA#%d", isa);
+ return s;
+}
+
+static const char *
+mips_cpu_to_str (cpu)
+ int cpu;
+{
+ const struct mips_cpu_info *ci;
+ static char s[16];
+
+ ci = mips_cpu_info_from_cpu (cpu);
+ if (ci != NULL)
+ return (ci->name);
+
+ sprintf (s, "CPU#%d", cpu);
+ return s;
+}
+
+/* This function is called once, at assembler startup time. It should
+ set up all the tables, etc. that the MD part of the assembler will need. */
-/*
- * This function is called once, at assembler startup time. It should
- * set up all the tables, etc. that the MD part of the assembler will need.
- */
void
md_begin ()
{
- boolean ok = false;
register const char *retval = NULL;
- register unsigned int i = 0;
+ int i = 0;
+ const char *cpu;
+ char *a = NULL;
+ int broken = 0;
+ int mips_isa_from_cpu;
+ int target_cpu_had_mips16 = 0;
+ const struct mips_cpu_info *ci;
+
+ /* GP relative stuff not working for PE */
+ if (strncmp (TARGET_OS, "pe", 2) == 0
+ && g_switch_value != 0)
+ {
+ if (g_switch_seen)
+ as_bad (_("-G not supported in this configuration."));
+ g_switch_value = 0;
+ }
- if (mips_isa == -1)
+ cpu = TARGET_CPU;
+ if (strcmp (cpu + (sizeof TARGET_CPU) - 3, "el") == 0)
{
- const char *cpu;
- char *a = NULL;
+ a = xmalloc (sizeof TARGET_CPU);
+ strcpy (a, TARGET_CPU);
+ a[(sizeof TARGET_CPU) - 3] = '\0';
+ cpu = a;
+ }
- cpu = TARGET_CPU;
- if (strcmp (cpu + (sizeof TARGET_CPU) - 3, "el") == 0)
- {
- a = xmalloc (sizeof TARGET_CPU);
- strcpy (a, TARGET_CPU);
- a[(sizeof TARGET_CPU) - 3] = '\0';
- cpu = a;
- }
+ if (strncmp (cpu, "mips16", sizeof "mips16" - 1) == 0)
+ {
+ target_cpu_had_mips16 = 1;
+ cpu += sizeof "mips16" - 1;
+ }
- if (strcmp (cpu, "mips") == 0)
- {
- mips_isa = 1;
- if (mips_cpu == -1)
- mips_cpu = 3000;
- }
- else if (strcmp (cpu, "r6000") == 0
- || strcmp (cpu, "mips2") == 0)
- {
- mips_isa = 2;
- if (mips_cpu == -1)
- mips_cpu = 6000;
- }
- else if (strcmp (cpu, "mips64") == 0
- || strcmp (cpu, "r4000") == 0
- || strcmp (cpu, "mips3") == 0)
- {
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 4000;
- }
- else if (strcmp (cpu, "r4400") == 0)
- {
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 4400;
- }
- else if (strcmp (cpu, "mips64orion") == 0
- || strcmp (cpu, "r4600") == 0)
- {
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 4600;
- }
- else
- {
- mips_isa = 1;
- if (mips_cpu == -1)
- mips_cpu = 3000;
- }
+ if (mips_opts.mips16 < 0)
+ mips_opts.mips16 = target_cpu_had_mips16;
- if (a != NULL)
- free (a);
+ /* At this point, mips_cpu will either be CPU_UNKNOWN if no CPU was
+ specified on the command line, or some other value if one was.
+ Similarly, mips_opts.isa will be ISA_UNKNOWN if not specified on
+ the command line, or will be set otherwise if one was. */
+ if (mips_cpu != CPU_UNKNOWN && mips_opts.isa != ISA_UNKNOWN)
+ {
+ /* We have it all. There's nothing to do. */
+ }
+ else if (mips_cpu != CPU_UNKNOWN && mips_opts.isa == ISA_UNKNOWN)
+ {
+ /* We have CPU, we need ISA. */
+ ci = mips_cpu_info_from_cpu (mips_cpu);
+ assert (ci != NULL);
+ mips_opts.isa = ci->isa;
+ }
+ else if (mips_cpu == CPU_UNKNOWN && mips_opts.isa != ISA_UNKNOWN)
+ {
+ /* We have ISA, we need default CPU. */
+ ci = mips_cpu_info_from_isa (mips_opts.isa);
+ assert (ci != NULL);
+ mips_cpu = ci->cpu;
+ }
+ else
+ {
+ /* We need to set both ISA and CPU from target cpu. */
+ ci = mips_cpu_info_from_name (cpu);
+ if (ci == NULL)
+ ci = mips_cpu_info_from_cpu (CPU_R3000);
+ assert (ci != NULL);
+ mips_opts.isa = ci->isa;
+ mips_cpu = ci->cpu;
}
- if (mips_isa < 2 && mips_trap)
- as_bad ("trap exception not supported at ISA 1");
+ ci = mips_cpu_info_from_cpu (mips_cpu);
+ assert (ci != NULL);
+ mips_isa_from_cpu = ci->isa;
- switch (mips_isa)
+ /* End of TARGET_CPU processing, get rid of malloced memory
+ if necessary. */
+ cpu = NULL;
+ if (a != NULL)
{
- case 1:
- ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, 3000);
- break;
- case 2:
- ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, 6000);
- break;
- case 3:
- ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, 4000);
- break;
+ free (a);
+ a = NULL;
}
- if (! ok)
- as_warn ("Could not set architecture and machine");
- file_mips_isa = mips_isa;
+ if (mips_opts.isa == ISA_MIPS1 && mips_trap)
+ as_bad (_("trap exception not supported at ISA 1"));
+
+ /* Set the EABI kind based on the ISA before the user gets
+ to change the ISA with directives. This isn't really
+ the best, but then neither is basing the abi on the isa. */
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && mips_abi_string
+ && 0 == strcmp (mips_abi_string, "eabi"))
+ mips_eabi64 = 1;
+
+ /* If they asked for mips1 or mips2 and a cpu that is
+ mips3 or greater, then mark the object file 32BITMODE. */
+ if (mips_isa_from_cpu != ISA_UNKNOWN
+ && ! ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && ISA_HAS_64BIT_REGS (mips_isa_from_cpu))
+ mips_32bitmode = 1;
+
+ if (! bfd_set_arch_mach (stdoutput, bfd_arch_mips, mips_cpu))
+ as_warn (_("Could not set architecture and machine"));
+
+ file_mips_isa = mips_opts.isa;
op_hash = hash_new ();
retval = hash_insert (op_hash, name, (PTR) &mips_opcodes[i]);
if (retval != NULL)
{
- fprintf (stderr, "internal error: can't hash `%s': %s\n",
+ fprintf (stderr, _("internal error: can't hash `%s': %s\n"),
mips_opcodes[i].name, retval);
- as_fatal ("Broken assembler. No assembly attempted.");
+ /* Probably a memory allocation problem? Give up now. */
+ as_fatal (_("Broken assembler. No assembly attempted."));
}
do
{
- if (mips_opcodes[i].pinfo != INSN_MACRO
- && ((mips_opcodes[i].match & mips_opcodes[i].mask)
- != mips_opcodes[i].match))
+ if (mips_opcodes[i].pinfo != INSN_MACRO)
{
- fprintf (stderr, "internal error: bad opcode: `%s' \"%s\"\n",
- mips_opcodes[i].name, mips_opcodes[i].args);
- as_fatal ("Broken assembler. No assembly attempted.");
+ if (!validate_mips_insn (&mips_opcodes[i]))
+ broken = 1;
}
++i;
}
while ((i < NUMOPCODES) && !strcmp (mips_opcodes[i].name, name));
}
- mips_no_prev_insn ();
+ mips16_op_hash = hash_new ();
+
+ i = 0;
+ while (i < bfd_mips16_num_opcodes)
+ {
+ const char *name = mips16_opcodes[i].name;
+
+ retval = hash_insert (mips16_op_hash, name, (PTR) &mips16_opcodes[i]);
+ if (retval != NULL)
+ as_fatal (_("internal: can't hash `%s': %s"),
+ mips16_opcodes[i].name, retval);
+ do
+ {
+ if (mips16_opcodes[i].pinfo != INSN_MACRO
+ && ((mips16_opcodes[i].match & mips16_opcodes[i].mask)
+ != mips16_opcodes[i].match))
+ {
+ fprintf (stderr, _("internal error: bad mips16 opcode: %s %s\n"),
+ mips16_opcodes[i].name, mips16_opcodes[i].args);
+ broken = 1;
+ }
+ ++i;
+ }
+ while (i < bfd_mips16_num_opcodes
+ && strcmp (mips16_opcodes[i].name, name) == 0);
+ }
+
+ if (broken)
+ as_fatal (_("Broken assembler. No assembly attempted."));
+
+ /* We add all the general register names to the symbol table. This
+ helps us detect invalid uses of them. */
+ for (i = 0; i < 32; i++)
+ {
+ char buf[5];
+
+ sprintf (buf, "$%d", i);
+ symbol_table_insert (symbol_new (buf, reg_section, i,
+ &zero_address_frag));
+ }
+ symbol_table_insert (symbol_new ("$fp", reg_section, FP,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$sp", reg_section, SP,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$gp", reg_section, GP,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$at", reg_section, AT,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$kt0", reg_section, KT0,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$kt1", reg_section, KT1,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$pc", reg_section, -1,
+ &zero_address_frag));
+
+ mips_no_prev_insn (false);
mips_gprmask = 0;
mips_cprmask[0] = 0;
/* set the default alignment for the text section (2**2) */
record_alignment (text_section, 2);
- /* FIXME: This should be handled in a different way. */
- target_big_endian = byte_order == BIG_ENDIAN;
+ if (USE_GLOBAL_POINTER_OPT)
+ bfd_set_gp_size (stdoutput, g_switch_value);
-#ifdef GPOPT
- bfd_set_gp_size (stdoutput, g_switch_value);
-#endif
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ {
+ /* On a native system, sections must be aligned to 16 byte
+ boundaries. When configured for an embedded ELF target, we
+ don't bother. */
+ if (strcmp (TARGET_OS, "elf") != 0)
+ {
+ (void) bfd_set_section_alignment (stdoutput, text_section, 4);
+ (void) bfd_set_section_alignment (stdoutput, data_section, 4);
+ (void) bfd_set_section_alignment (stdoutput, bss_section, 4);
+ }
+
+ /* Create a .reginfo section for register masks and a .mdebug
+ section for debugging information. */
+ {
+ segT seg;
+ subsegT subseg;
+ flagword flags;
+ segT sec;
+
+ seg = now_seg;
+ subseg = now_subseg;
+
+ /* The ABI says this section should be loaded so that the
+ running program can access it. However, we don't load it
+ if we are configured for an embedded target */
+ flags = SEC_READONLY | SEC_DATA;
+ if (strcmp (TARGET_OS, "elf") != 0)
+ flags |= SEC_ALLOC | SEC_LOAD;
+
+ if (! mips_64)
+ {
+ sec = subseg_new (".reginfo", (subsegT) 0);
+
+ (void) bfd_set_section_flags (stdoutput, sec, flags);
+ (void) bfd_set_section_alignment (stdoutput, sec, 2);
#ifdef OBJ_ELF
- /* Sections must be aligned to 16 byte boundaries. */
- (void) bfd_set_section_alignment (stdoutput, text_section, 4);
- (void) bfd_set_section_alignment (stdoutput, data_section, 4);
- (void) bfd_set_section_alignment (stdoutput, bss_section, 4);
+ mips_regmask_frag = frag_more (sizeof (Elf32_External_RegInfo));
+#endif
+ }
+ else
+ {
+ /* The 64-bit ABI uses a .MIPS.options section rather than
+ .reginfo section. */
+ sec = subseg_new (".MIPS.options", (subsegT) 0);
+ (void) bfd_set_section_flags (stdoutput, sec, flags);
+ (void) bfd_set_section_alignment (stdoutput, sec, 3);
- /* Create a .reginfo section for register masks and a .mdebug
- section for debugging information. */
- {
- segT seg;
- subsegT subseg;
- segT sec;
-
- seg = now_seg;
- subseg = now_subseg;
- sec = subseg_new (".reginfo", (subsegT) 0);
-
- /* The ABI says this section should be loaded so that the running
- program can access it. */
- (void) bfd_set_section_flags (stdoutput, sec,
- (SEC_ALLOC | SEC_LOAD
- | SEC_READONLY | SEC_DATA));
- (void) bfd_set_section_alignment (stdoutput, sec, 2);
-
- mips_regmask_frag = frag_more (sizeof (Elf32_External_RegInfo));
-
-#ifdef ECOFF_DEBUGGING
- sec = subseg_new (".mdebug", (subsegT) 0);
- (void) bfd_set_section_flags (stdoutput, sec,
- SEC_HAS_CONTENTS | SEC_READONLY);
- (void) bfd_set_section_alignment (stdoutput, sec, 2);
+#ifdef OBJ_ELF
+ /* Set up the option header. */
+ {
+ Elf_Internal_Options opthdr;
+ char *f;
+
+ opthdr.kind = ODK_REGINFO;
+ opthdr.size = (sizeof (Elf_External_Options)
+ + sizeof (Elf64_External_RegInfo));
+ opthdr.section = 0;
+ opthdr.info = 0;
+ f = frag_more (sizeof (Elf_External_Options));
+ bfd_mips_elf_swap_options_out (stdoutput, &opthdr,
+ (Elf_External_Options *) f);
+
+ mips_regmask_frag = frag_more (sizeof (Elf64_External_RegInfo));
+ }
#endif
+ }
- subseg_set (seg, subseg);
- }
-#endif /* OBJ_ELF */
+ if (ECOFF_DEBUGGING)
+ {
+ sec = subseg_new (".mdebug", (subsegT) 0);
+ (void) bfd_set_section_flags (stdoutput, sec,
+ SEC_HAS_CONTENTS | SEC_READONLY);
+ (void) bfd_set_section_alignment (stdoutput, sec, 2);
+ }
-#ifndef ECOFF_DEBUGGING
- md_obj_begin ();
+#ifdef MIPS_STABS_ELF
+ pdr_seg = subseg_new (".pdr", (subsegT) 0);
+ (void) bfd_set_section_flags (stdoutput, pdr_seg,
+ SEC_READONLY | SEC_RELOC | SEC_DEBUGGING);
+ (void) bfd_set_section_alignment (stdoutput, pdr_seg, 2);
#endif
+
+ subseg_set (seg, subseg);
+ }
+ }
+
+ if (! ECOFF_DEBUGGING)
+ md_obj_begin ();
}
void
md_mips_end ()
{
-#ifndef ECOFF_DEBUGGING
- md_obj_end ();
-#endif
+ if (! ECOFF_DEBUGGING)
+ md_obj_end ();
}
void
struct mips_cl_insn insn;
imm_expr.X_op = O_absent;
+ imm_reloc = BFD_RELOC_UNUSED;
+ imm_unmatched_hi = false;
offset_expr.X_op = O_absent;
+ offset_reloc = BFD_RELOC_UNUSED;
+
+ if (mips_opts.mips16)
+ mips16_ip (str, &insn);
+ else
+ {
+ mips_ip (str, &insn);
+ DBG ((_("returned from mips_ip(%s) insn_opcode = 0x%x\n"),
+ str, insn.insn_opcode));
+ }
- mips_ip (str, &insn);
if (insn_error)
{
as_bad ("%s `%s'", insn_error, str);
return;
}
+
if (insn.insn_mo->pinfo == INSN_MACRO)
{
- macro (&insn);
+ if (mips_opts.mips16)
+ mips16_macro (&insn);
+ else
+ macro (&insn);
}
else
{
if (imm_expr.X_op != O_absent)
- append_insn ((char *) NULL, &insn, &imm_expr, imm_reloc);
+ append_insn ((char *) NULL, &insn, &imm_expr, imm_reloc,
+ imm_unmatched_hi);
else if (offset_expr.X_op != O_absent)
- append_insn ((char *) NULL, &insn, &offset_expr, offset_reloc);
+ append_insn ((char *) NULL, &insn, &offset_expr, offset_reloc, false);
else
- append_insn ((char *) NULL, &insn, NULL, BFD_RELOC_UNUSED);
+ append_insn ((char *) NULL, &insn, NULL, BFD_RELOC_UNUSED, false);
}
}
-/* See whether instruction IP reads register REG. If FPR is non-zero,
- REG is a floating point register. */
+/* See whether instruction IP reads register REG. CLASS is the type
+ of register. */
static int
-insn_uses_reg (ip, reg, fpr)
+insn_uses_reg (ip, reg, class)
struct mips_cl_insn *ip;
unsigned int reg;
- int fpr;
+ enum mips_regclass class;
{
+ if (class == MIPS16_REG)
+ {
+ assert (mips_opts.mips16);
+ reg = mips16_to_32_reg_map[reg];
+ class = MIPS_GR_REG;
+ }
+
/* Don't report on general register 0, since it never changes. */
- if (! fpr && reg == 0)
+ if (class == MIPS_GR_REG && reg == 0)
return 0;
- if (fpr)
+ if (class == MIPS_FP_REG)
{
+ assert (! mips_opts.mips16);
/* If we are called with either $f0 or $f1, we must check $f0.
This is not optimal, because it will introduce an unnecessary
NOP between "lwc1 $f0" and "swc1 $f1". To fix this we would
because there is no instruction that sets both $f0 and $f1
and requires a delay. */
if ((ip->insn_mo->pinfo & INSN_READ_FPR_S)
- && (((ip->insn_opcode >> OP_SH_FS) & OP_MASK_FS)
+ && ((((ip->insn_opcode >> OP_SH_FS) & OP_MASK_FS) &~(unsigned)1)
== (reg &~ (unsigned) 1)))
return 1;
if ((ip->insn_mo->pinfo & INSN_READ_FPR_T)
- && (((ip->insn_opcode >> OP_SH_FT) & OP_MASK_FT)
+ && ((((ip->insn_opcode >> OP_SH_FT) & OP_MASK_FT) &~(unsigned)1)
== (reg &~ (unsigned) 1)))
return 1;
}
- else
+ else if (! mips_opts.mips16)
{
if ((ip->insn_mo->pinfo & INSN_READ_GPR_S)
&& ((ip->insn_opcode >> OP_SH_RS) & OP_MASK_RS) == reg)
&& ((ip->insn_opcode >> OP_SH_RT) & OP_MASK_RT) == reg)
return 1;
}
+ else
+ {
+ if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_X)
+ && (mips16_to_32_reg_map[((ip->insn_opcode >> MIPS16OP_SH_RX)
+ & MIPS16OP_MASK_RX)]
+ == reg))
+ return 1;
+ if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_Y)
+ && (mips16_to_32_reg_map[((ip->insn_opcode >> MIPS16OP_SH_RY)
+ & MIPS16OP_MASK_RY)]
+ == reg))
+ return 1;
+ if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_Z)
+ && (mips16_to_32_reg_map[((ip->insn_opcode >> MIPS16OP_SH_MOVE32Z)
+ & MIPS16OP_MASK_MOVE32Z)]
+ == reg))
+ return 1;
+ if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_T) && reg == TREG)
+ return 1;
+ if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_SP) && reg == SP)
+ return 1;
+ if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_31) && reg == RA)
+ return 1;
+ if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_GPR_X)
+ && ((ip->insn_opcode >> MIPS16OP_SH_REGR32)
+ & MIPS16OP_MASK_REGR32) == reg)
+ return 1;
+ }
return 0;
}
-/* Output an instruction. PLACE is where to put the instruction; if
- it is NULL, this uses frag_more to get room. IP is the instruction
- information. ADDRESS_EXPR is an operand of the instruction to be
- used with RELOC_TYPE. */
+/* This function returns true if modifying a register requires a
+ delay. */
-static void
-append_insn (place, ip, address_expr, reloc_type)
- char *place;
- struct mips_cl_insn *ip;
- expressionS *address_expr;
- bfd_reloc_code_real_type reloc_type;
+static int
+reg_needs_delay (reg)
+ unsigned int reg;
{
- register unsigned long prev_pinfo, pinfo;
- char *f;
- fixS *fixp;
+ unsigned long prev_pinfo;
+
+ prev_pinfo = prev_insn.insn_mo->pinfo;
+ if (! mips_opts.noreorder
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ && ((prev_pinfo & INSN_LOAD_COPROC_DELAY)
+ || (! gpr_interlocks
+ && (prev_pinfo & INSN_LOAD_MEMORY_DELAY))))
+ {
+ /* A load from a coprocessor or from memory. All load
+ delays delay the use of general register rt for one
+ instruction on the r3000. The r6000 and r4000 use
+ interlocks. */
+ /* Itbl support may require additional care here. */
+ know (prev_pinfo & INSN_WRITE_GPR_T);
+ if (reg == ((prev_insn.insn_opcode >> OP_SH_RT) & OP_MASK_RT))
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Mark instruction labels in mips16 mode. This permits the linker to
+ handle them specially, such as generating jalx instructions when
+ needed. We also make them odd for the duration of the assembly, in
+ order to generate the right sort of code. We will make them even
+ in the adjust_symtab routine, while leaving them marked. This is
+ convenient for the debugger and the disassembler. The linker knows
+ to make them odd again. */
+
+static void
+mips16_mark_labels ()
+{
+ if (mips_opts.mips16)
+ {
+ struct insn_label_list *l;
+
+ for (l = insn_labels; l != NULL; l = l->next)
+ {
+#ifdef OBJ_ELF
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ S_SET_OTHER (l->label, STO_MIPS16);
+#endif
+ if ((S_GET_VALUE (l->label) & 1) == 0)
+ S_SET_VALUE (l->label, S_GET_VALUE (l->label) + 1);
+ }
+ }
+}
+
+/* Output an instruction. PLACE is where to put the instruction; if
+ it is NULL, this uses frag_more to get room. IP is the instruction
+ information. ADDRESS_EXPR is an operand of the instruction to be
+ used with RELOC_TYPE. */
+
+static void
+append_insn (place, ip, address_expr, reloc_type, unmatched_hi)
+ char *place;
+ struct mips_cl_insn *ip;
+ expressionS *address_expr;
+ bfd_reloc_code_real_type reloc_type;
+ boolean unmatched_hi;
+{
+ register unsigned long prev_pinfo, pinfo;
+ char *f;
+ fixS *fixp;
int nops = 0;
+ /* Mark instruction labels in mips16 mode. */
+ if (mips_opts.mips16)
+ mips16_mark_labels ();
+
prev_pinfo = prev_insn.insn_mo->pinfo;
pinfo = ip->insn_mo->pinfo;
- if (place == NULL && ! mips_noreorder)
+ if (place == NULL && (! mips_opts.noreorder || prev_nop_frag != NULL))
{
+ int prev_prev_nop;
+
/* If the previous insn required any delay slots, see if we need
to insert a NOP or two. There are eight kinds of possible
hazards, of which an instruction can have at most one type.
it. */
/* This is how a NOP is emitted. */
-#define emit_nop() md_number_to_chars (frag_more (4), 0, 4)
+#define emit_nop() \
+ (mips_opts.mips16 \
+ ? md_number_to_chars (frag_more (2), 0x6500, 2) \
+ : md_number_to_chars (frag_more (4), 0, 4))
/* The previous insn might require a delay slot, depending upon
the contents of the current insn. */
- if ((prev_pinfo & INSN_LOAD_COPROC_DELAY)
- || (mips_isa < 2
- && (prev_pinfo & INSN_LOAD_MEMORY_DELAY)))
+ if (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ && (((prev_pinfo & INSN_LOAD_COPROC_DELAY)
+ && ! cop_interlocks)
+ || (! gpr_interlocks
+ && (prev_pinfo & INSN_LOAD_MEMORY_DELAY))))
{
/* A load from a coprocessor or from memory. All load
delays delay the use of general register rt for one
instruction on the r3000. The r6000 and r4000 use
interlocks. */
+ /* Itbl support may require additional care here. */
know (prev_pinfo & INSN_WRITE_GPR_T);
if (mips_optimize == 0
|| insn_uses_reg (ip,
((prev_insn.insn_opcode >> OP_SH_RT)
& OP_MASK_RT),
- 0))
+ MIPS_GR_REG))
++nops;
}
- else if ((prev_pinfo & INSN_COPROC_MOVE_DELAY)
- || (mips_isa < 2
- && (prev_pinfo & INSN_COPROC_MEMORY_DELAY)))
+ else if (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ && (((prev_pinfo & INSN_COPROC_MOVE_DELAY)
+ && ! cop_interlocks)
+ || (mips_opts.isa == ISA_MIPS1
+ && (prev_pinfo & INSN_COPROC_MEMORY_DELAY))))
{
/* A generic coprocessor delay. The previous instruction
modified a coprocessor general or control register. If
knowledge of CP0 handling, and the coprocessors other
than the floating point unit are not distinguished at
all. */
+ /* Itbl support may require additional care here. FIXME!
+ Need to modify this to include knowledge about
+ user specified delays! */
if (prev_pinfo & INSN_WRITE_FPR_T)
{
if (mips_optimize == 0
|| insn_uses_reg (ip,
((prev_insn.insn_opcode >> OP_SH_FT)
& OP_MASK_FT),
- 1))
+ MIPS_FP_REG))
++nops;
}
else if (prev_pinfo & INSN_WRITE_FPR_S)
|| insn_uses_reg (ip,
((prev_insn.insn_opcode >> OP_SH_FS)
& OP_MASK_FS),
- 1))
+ MIPS_FP_REG))
++nops;
}
else
instruction may set the condition codes, and the
current instruction uses them, we must insert two
NOPS. */
+ /* Itbl support may require additional care here. */
if (mips_optimize == 0
|| ((prev_pinfo & INSN_WRITE_COND_CODE)
&& (pinfo & INSN_READ_COND_CODE)))
++nops;
}
}
- else if (prev_pinfo & INSN_WRITE_COND_CODE)
+ else if (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ && (prev_pinfo & INSN_WRITE_COND_CODE)
+ && ! cop_interlocks)
{
/* The previous instruction sets the coprocessor condition
codes, but does not require a general coprocessor delay
(this means it is a floating point comparison
instruction). If this instruction uses the condition
codes, we need to insert a single NOP. */
+ /* Itbl support may require additional care here. */
if (mips_optimize == 0
|| (pinfo & INSN_READ_COND_CODE))
++nops;
}
+
+ /* If we're fixing up mfhi/mflo for the r7000 and the
+ previous insn was an mfhi/mflo and the current insn
+ reads the register that the mfhi/mflo wrote to, then
+ insert two nops. */
+
+ else if (mips_7000_hilo_fix
+ && MF_HILO_INSN (prev_pinfo)
+ && insn_uses_reg (ip, ((prev_insn.insn_opcode >> OP_SH_RD)
+ & OP_MASK_RD),
+ MIPS_GR_REG))
+ {
+ nops += 2;
+ }
+
+ /* If we're fixing up mfhi/mflo for the r7000 and the
+ 2nd previous insn was an mfhi/mflo and the current insn
+ reads the register that the mfhi/mflo wrote to, then
+ insert one nop. */
+
+ else if (mips_7000_hilo_fix
+ && MF_HILO_INSN (prev_prev_insn.insn_opcode)
+ && insn_uses_reg (ip, ((prev_prev_insn.insn_opcode >> OP_SH_RD)
+ & OP_MASK_RD),
+ MIPS_GR_REG))
+
+ {
+ nops += 1;
+ }
+
else if (prev_pinfo & INSN_READ_LO)
{
/* The previous instruction reads the LO register; if the
current instruction writes to the LO register, we must
- insert two NOPS. */
- if (mips_optimize == 0
- || (pinfo & INSN_WRITE_LO))
+ insert two NOPS. Some newer processors have interlocks.
+ Also the tx39's multiply instructions can be exectuted
+ immediatly after a read from HI/LO (without the delay),
+ though the tx39's divide insns still do require the
+ delay. */
+ if (! (hilo_interlocks
+ || (mips_cpu == CPU_R3900 && (pinfo & INSN_MULT)))
+ && (mips_optimize == 0
+ || (pinfo & INSN_WRITE_LO)))
nops += 2;
+ /* Most mips16 branch insns don't have a delay slot.
+ If a read from LO is immediately followed by a branch
+ to a write to LO we have a read followed by a write
+ less than 2 insns away. We assume the target of
+ a branch might be a write to LO, and insert a nop
+ between a read and an immediately following branch. */
+ else if (mips_opts.mips16
+ && (mips_optimize == 0
+ || (pinfo & MIPS16_INSN_BRANCH)))
+ nops += 1;
}
else if (prev_insn.insn_mo->pinfo & INSN_READ_HI)
{
/* The previous instruction reads the HI register; if the
current instruction writes to the HI register, we must
- insert a NOP. */
- if (mips_optimize == 0
- || (pinfo & INSN_WRITE_HI))
+ insert a NOP. Some newer processors have interlocks.
+ Also the note tx39's multiply above. */
+ if (! (hilo_interlocks
+ || (mips_cpu == CPU_R3900 && (pinfo & INSN_MULT)))
+ && (mips_optimize == 0
+ || (pinfo & INSN_WRITE_HI)))
nops += 2;
- }
+ /* Most mips16 branch insns don't have a delay slot.
+ If a read from HI is immediately followed by a branch
+ to a write to HI we have a read followed by a write
+ less than 2 insns away. We assume the target of
+ a branch might be a write to HI, and insert a nop
+ between a read and an immediately following branch. */
+ else if (mips_opts.mips16
+ && (mips_optimize == 0
+ || (pinfo & MIPS16_INSN_BRANCH)))
+ nops += 1;
+ }
+
+ /* If the previous instruction was in a noreorder section, then
+ we don't want to insert the nop after all. */
+ /* Itbl support may require additional care here. */
+ if (prev_insn_unreordered)
+ nops = 0;
/* There are two cases which require two intervening
instructions: 1) setting the condition codes using a move to
coprocessor instruction which requires a general coprocessor
delay and then reading the condition codes 2) reading the HI
- or LO register and then writing to it. If we are not already
- emitting a NOP instruction, we must check for these cases
- compared to the instruction previous to the previous
- instruction. */
- if (nops == 0
- && (((prev_prev_insn.insn_mo->pinfo & INSN_COPROC_MOVE_DELAY)
- && (prev_prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE)
- && (pinfo & INSN_READ_COND_CODE))
- || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_LO)
- && (pinfo & INSN_WRITE_LO))
- || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_HI)
- && (pinfo & INSN_WRITE_HI))))
+ or LO register and then writing to it (except on processors
+ which have interlocks). If we are not already emitting a NOP
+ instruction, we must check for these cases compared to the
+ instruction previous to the previous instruction. */
+ if ((! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ && (prev_prev_insn.insn_mo->pinfo & INSN_COPROC_MOVE_DELAY)
+ && (prev_prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE)
+ && (pinfo & INSN_READ_COND_CODE)
+ && ! cop_interlocks)
+ || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_LO)
+ && (pinfo & INSN_WRITE_LO)
+ && ! (hilo_interlocks
+ || (mips_cpu == CPU_R3900 && (pinfo & INSN_MULT))))
+ || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_HI)
+ && (pinfo & INSN_WRITE_HI)
+ && ! (hilo_interlocks
+ || (mips_cpu == CPU_R3900 && (pinfo & INSN_MULT)))))
+ prev_prev_nop = 1;
+ else
+ prev_prev_nop = 0;
+
+ if (prev_prev_insn_unreordered)
+ prev_prev_nop = 0;
+
+ if (prev_prev_nop && nops == 0)
++nops;
/* If we are being given a nop instruction, don't bother with
one of the nops we would otherwise output. This will only
happen when a nop instruction is used with mips_optimize set
to 0. */
- if (nops > 0 && ip->insn_opcode == 0)
+ if (nops > 0
+ && ! mips_opts.noreorder
+ && ip->insn_opcode == (unsigned) (mips_opts.mips16 ? 0x6500 : 0))
--nops;
/* Now emit the right number of NOP instructions. */
- if (nops > 0)
+ if (nops > 0 && ! mips_opts.noreorder)
{
+ fragS *old_frag;
+ unsigned long old_frag_offset;
int i;
+ struct insn_label_list *l;
+
+ old_frag = frag_now;
+ old_frag_offset = frag_now_fix ();
for (i = 0; i < nops; i++)
emit_nop ();
+
if (listing)
- listing_prev_line ();
- if (insn_label != NULL)
{
- assert (S_GET_SEGMENT (insn_label) == now_seg);
- insn_label->sy_frag = frag_now;
- S_SET_VALUE (insn_label, (valueT) frag_now_fix ());
+ listing_prev_line ();
+ /* We may be at the start of a variant frag. In case we
+ are, make sure there is enough space for the frag
+ after the frags created by listing_prev_line. The
+ argument to frag_grow here must be at least as large
+ as the argument to all other calls to frag_grow in
+ this file. We don't have to worry about being in the
+ middle of a variant frag, because the variants insert
+ all needed nop instructions themselves. */
+ frag_grow (40);
+ }
+
+ for (l = insn_labels; l != NULL; l = l->next)
+ {
+ assert (S_GET_SEGMENT (l->label) == now_seg);
+ symbol_set_frag (l->label, frag_now);
+ S_SET_VALUE (l->label, (valueT) frag_now_fix ());
+ /* mips16 text labels are stored as odd. */
+ if (mips_opts.mips16)
+ S_SET_VALUE (l->label, S_GET_VALUE (l->label) + 1);
+ }
+
+#ifndef NO_ECOFF_DEBUGGING
+ if (ECOFF_DEBUGGING)
+ ecoff_fix_loc (old_frag, old_frag_offset);
+#endif
+ }
+ else if (prev_nop_frag != NULL)
+ {
+ /* We have a frag holding nops we may be able to remove. If
+ we don't need any nops, we can decrease the size of
+ prev_nop_frag by the size of one instruction. If we do
+ need some nops, we count them in prev_nops_required. */
+ if (prev_nop_frag_since == 0)
+ {
+ if (nops == 0)
+ {
+ prev_nop_frag->fr_fix -= mips_opts.mips16 ? 2 : 4;
+ --prev_nop_frag_holds;
+ }
+ else
+ prev_nop_frag_required += nops;
+ }
+ else
+ {
+ if (prev_prev_nop == 0)
+ {
+ prev_nop_frag->fr_fix -= mips_opts.mips16 ? 2 : 4;
+ --prev_nop_frag_holds;
+ }
+ else
+ ++prev_nop_frag_required;
}
+
+ if (prev_nop_frag_holds <= prev_nop_frag_required)
+ prev_nop_frag = NULL;
+
+ ++prev_nop_frag_since;
+
+ /* Sanity check: by the time we reach the second instruction
+ after prev_nop_frag, we should have used up all the nops
+ one way or another. */
+ assert (prev_nop_frag_since <= 1 || prev_nop_frag == NULL);
}
}
-
- if (place == NULL)
- f = frag_more (4);
- else
+
+ if (reloc_type > BFD_RELOC_UNUSED)
+ {
+ /* We need to set up a variant frag. */
+ assert (mips_opts.mips16 && address_expr != NULL);
+ f = frag_var (rs_machine_dependent, 4, 0,
+ RELAX_MIPS16_ENCODE (reloc_type - BFD_RELOC_UNUSED,
+ mips16_small, mips16_ext,
+ (prev_pinfo
+ & INSN_UNCOND_BRANCH_DELAY),
+ (prev_insn_reloc_type
+ == BFD_RELOC_MIPS16_JMP)),
+ make_expr_symbol (address_expr), (offsetT) 0,
+ (char *) NULL);
+ }
+ else if (place != NULL)
f = place;
+ else if (mips_opts.mips16
+ && ! ip->use_extend
+ && reloc_type != BFD_RELOC_MIPS16_JMP)
+ {
+ /* Make sure there is enough room to swap this instruction with
+ a following jump instruction. */
+ frag_grow (6);
+ f = frag_more (2);
+ }
+ else
+ {
+ if (mips_opts.mips16
+ && mips_opts.noreorder
+ && (prev_pinfo & INSN_UNCOND_BRANCH_DELAY) != 0)
+ as_warn (_("extended instruction in delay slot"));
+
+ f = frag_more (4);
+ }
+
fixp = NULL;
- if (address_expr != NULL)
+ if (address_expr != NULL && reloc_type < BFD_RELOC_UNUSED)
{
if (address_expr->X_op == O_constant)
{
break;
case BFD_RELOC_MIPS_JMP:
+ if ((address_expr->X_add_number & 3) != 0)
+ as_bad (_("jump to misaligned address (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ ip->insn_opcode |= (address_expr->X_add_number >> 2) & 0x3ffffff;
+ break;
+
+ case BFD_RELOC_MIPS16_JMP:
+ if ((address_expr->X_add_number & 3) != 0)
+ as_bad (_("jump to misaligned address (0x%lx)"),
+ (unsigned long) address_expr->X_add_number);
+ ip->insn_opcode |=
+ (((address_expr->X_add_number & 0x7c0000) << 3)
+ | ((address_expr->X_add_number & 0xf800000) >> 7)
+ | ((address_expr->X_add_number & 0x3fffc) >> 2));
+ break;
+
case BFD_RELOC_16_PCREL_S2:
goto need_reloc;
}
else
{
- assert (reloc_type != BFD_RELOC_UNUSED);
need_reloc:
/* Don't generate a reloc if we are writing into a variant
frag. */
if (place == NULL)
- fixp = fix_new_exp (frag_now, f - frag_now->fr_literal, 4,
- address_expr,
- reloc_type == BFD_RELOC_16_PCREL_S2,
- reloc_type);
+ {
+ fixp = fix_new_exp (frag_now, f - frag_now->fr_literal, 4,
+ address_expr,
+ reloc_type == BFD_RELOC_16_PCREL_S2,
+ reloc_type);
+ if (unmatched_hi)
+ {
+ struct mips_hi_fixup *hi_fixup;
+
+ assert (reloc_type == BFD_RELOC_HI16_S);
+ hi_fixup = ((struct mips_hi_fixup *)
+ xmalloc (sizeof (struct mips_hi_fixup)));
+ hi_fixup->fixp = fixp;
+ hi_fixup->seg = now_seg;
+ hi_fixup->next = mips_hi_fixup_list;
+ mips_hi_fixup_list = hi_fixup;
+ }
+ }
}
}
- md_number_to_chars (f, ip->insn_opcode, 4);
+ if (! mips_opts.mips16)
+ md_number_to_chars (f, ip->insn_opcode, 4);
+ else if (reloc_type == BFD_RELOC_MIPS16_JMP)
+ {
+ md_number_to_chars (f, ip->insn_opcode >> 16, 2);
+ md_number_to_chars (f + 2, ip->insn_opcode & 0xffff, 2);
+ }
+ else
+ {
+ if (ip->use_extend)
+ {
+ md_number_to_chars (f, 0xf000 | ip->extend, 2);
+ f += 2;
+ }
+ md_number_to_chars (f, ip->insn_opcode, 2);
+ }
/* Update the register mask information. */
- if (pinfo & INSN_WRITE_GPR_D)
- mips_gprmask |= 1 << ((ip->insn_opcode >> OP_SH_RD) & OP_MASK_RD);
- if ((pinfo & (INSN_WRITE_GPR_T | INSN_READ_GPR_T)) != 0)
- mips_gprmask |= 1 << ((ip->insn_opcode >> OP_SH_RT) & OP_MASK_RT);
- if (pinfo & INSN_READ_GPR_S)
- mips_gprmask |= 1 << ((ip->insn_opcode >> OP_SH_RS) & OP_MASK_RS);
- if (pinfo & INSN_WRITE_GPR_31)
- mips_gprmask |= 1 << 31;
- if (pinfo & INSN_WRITE_FPR_D)
- mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FD) & OP_MASK_FD);
- if ((pinfo & (INSN_WRITE_FPR_S | INSN_READ_FPR_S)) != 0)
- mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FS) & OP_MASK_FS);
- if ((pinfo & (INSN_WRITE_FPR_T | INSN_READ_FPR_T)) != 0)
- mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FT) & OP_MASK_FT);
- if (pinfo & INSN_COP)
- {
- /* We don't keep enough information to sort these cases out. */
- }
- /* Never set the bit for $0, which is always zero. */
- mips_gprmask &=~ 1 << 0;
-
- if (place == NULL && ! mips_noreorder)
+ if (! mips_opts.mips16)
+ {
+ if (pinfo & INSN_WRITE_GPR_D)
+ mips_gprmask |= 1 << ((ip->insn_opcode >> OP_SH_RD) & OP_MASK_RD);
+ if ((pinfo & (INSN_WRITE_GPR_T | INSN_READ_GPR_T)) != 0)
+ mips_gprmask |= 1 << ((ip->insn_opcode >> OP_SH_RT) & OP_MASK_RT);
+ if (pinfo & INSN_READ_GPR_S)
+ mips_gprmask |= 1 << ((ip->insn_opcode >> OP_SH_RS) & OP_MASK_RS);
+ if (pinfo & INSN_WRITE_GPR_31)
+ mips_gprmask |= 1 << 31;
+ if (pinfo & INSN_WRITE_FPR_D)
+ mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FD) & OP_MASK_FD);
+ if ((pinfo & (INSN_WRITE_FPR_S | INSN_READ_FPR_S)) != 0)
+ mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FS) & OP_MASK_FS);
+ if ((pinfo & (INSN_WRITE_FPR_T | INSN_READ_FPR_T)) != 0)
+ mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FT) & OP_MASK_FT);
+ if ((pinfo & INSN_READ_FPR_R) != 0)
+ mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FR) & OP_MASK_FR);
+ if (pinfo & INSN_COP)
+ {
+ /* We don't keep enough information to sort these cases out.
+ The itbl support does keep this information however, although
+ we currently don't support itbl fprmats as part of the cop
+ instruction. May want to add this support in the future. */
+ }
+ /* Never set the bit for $0, which is always zero. */
+ mips_gprmask &= ~1 << 0;
+ }
+ else
+ {
+ if (pinfo & (MIPS16_INSN_WRITE_X | MIPS16_INSN_READ_X))
+ mips_gprmask |= 1 << ((ip->insn_opcode >> MIPS16OP_SH_RX)
+ & MIPS16OP_MASK_RX);
+ if (pinfo & (MIPS16_INSN_WRITE_Y | MIPS16_INSN_READ_Y))
+ mips_gprmask |= 1 << ((ip->insn_opcode >> MIPS16OP_SH_RY)
+ & MIPS16OP_MASK_RY);
+ if (pinfo & MIPS16_INSN_WRITE_Z)
+ mips_gprmask |= 1 << ((ip->insn_opcode >> MIPS16OP_SH_RZ)
+ & MIPS16OP_MASK_RZ);
+ if (pinfo & (MIPS16_INSN_WRITE_T | MIPS16_INSN_READ_T))
+ mips_gprmask |= 1 << TREG;
+ if (pinfo & (MIPS16_INSN_WRITE_SP | MIPS16_INSN_READ_SP))
+ mips_gprmask |= 1 << SP;
+ if (pinfo & (MIPS16_INSN_WRITE_31 | MIPS16_INSN_READ_31))
+ mips_gprmask |= 1 << RA;
+ if (pinfo & MIPS16_INSN_WRITE_GPR_Y)
+ mips_gprmask |= 1 << MIPS16OP_EXTRACT_REG32R (ip->insn_opcode);
+ if (pinfo & MIPS16_INSN_READ_Z)
+ mips_gprmask |= 1 << ((ip->insn_opcode >> MIPS16OP_SH_MOVE32Z)
+ & MIPS16OP_MASK_MOVE32Z);
+ if (pinfo & MIPS16_INSN_READ_GPR_X)
+ mips_gprmask |= 1 << ((ip->insn_opcode >> MIPS16OP_SH_REGR32)
+ & MIPS16OP_MASK_REGR32);
+ }
+
+ if (place == NULL && ! mips_opts.noreorder)
{
/* Filling the branch delay slot is more complex. We try to
switch the branch with the previous instruction, which we can
if (mips_optimize < 2
/* If we have seen .set volatile or .set nomove, don't
optimize. */
- || mips_nomove != 0
+ || mips_opts.nomove != 0
/* If we had to emit any NOP instructions, then we
already know we can not swap. */
|| nops != 0
/* If we don't even know the previous insn, we can not
- swap. */
+ swap. */
|| ! prev_insn_valid
/* If the previous insn is already in a branch delay
slot, then we can not swap. */
whether there is a label on this instruction. If
there are any branches to anything other than a
label, users must use .set noreorder. */
- || insn_label != NULL
+ || insn_labels != NULL
/* If the previous instruction is in a variant frag, we
- can not do the swap. */
- || prev_insn_frag->fr_type == rs_machine_dependent
+ can not do the swap. This does not apply to the
+ mips16, which uses variant frags for different
+ purposes. */
+ || (! mips_opts.mips16
+ && prev_insn_frag->fr_type == rs_machine_dependent)
/* If the branch reads the condition codes, we don't
even try to swap, because in the sequence
ctc1 $X,$31
bc1t LABEL
we can not swap, and I don't feel like handling that
case. */
- || (pinfo & INSN_READ_COND_CODE)
+ || (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ && (pinfo & INSN_READ_COND_CODE))
/* We can not swap with an instruction that requires a
delay slot, becase the target of the branch might
interfere with that instruction. */
- || (prev_pinfo
- & (INSN_LOAD_COPROC_DELAY
- | INSN_COPROC_MOVE_DELAY
- | INSN_WRITE_COND_CODE
- | INSN_READ_LO
- | INSN_READ_HI))
- || (mips_isa < 2
+ || (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
&& (prev_pinfo
- & (INSN_LOAD_MEMORY_DELAY
- | INSN_COPROC_MEMORY_DELAY)))
+ /* Itbl support may require additional care here. */
+ & (INSN_LOAD_COPROC_DELAY
+ | INSN_COPROC_MOVE_DELAY
+ | INSN_WRITE_COND_CODE)))
+ || (! (hilo_interlocks
+ || (mips_cpu == CPU_R3900 && (pinfo & INSN_MULT)))
+ && (prev_pinfo
+ & (INSN_READ_LO
+ | INSN_READ_HI)))
+ || (! mips_opts.mips16
+ && ! gpr_interlocks
+ && (prev_pinfo & INSN_LOAD_MEMORY_DELAY))
+ || (! mips_opts.mips16
+ && mips_opts.isa == ISA_MIPS1
+ /* Itbl support may require additional care here. */
+ && (prev_pinfo & INSN_COPROC_MEMORY_DELAY))
/* We can not swap with a branch instruction. */
|| (prev_pinfo
& (INSN_UNCOND_BRANCH_DELAY
|| (prev_pinfo & INSN_TRAP)
/* If the branch reads a register that the previous
instruction sets, we can not swap. */
- || ((prev_pinfo & INSN_WRITE_GPR_T)
+ || (! mips_opts.mips16
+ && (prev_pinfo & INSN_WRITE_GPR_T)
&& insn_uses_reg (ip,
((prev_insn.insn_opcode >> OP_SH_RT)
& OP_MASK_RT),
- 0))
- || ((prev_pinfo & INSN_WRITE_GPR_D)
+ MIPS_GR_REG))
+ || (! mips_opts.mips16
+ && (prev_pinfo & INSN_WRITE_GPR_D)
&& insn_uses_reg (ip,
((prev_insn.insn_opcode >> OP_SH_RD)
& OP_MASK_RD),
- 0))
+ MIPS_GR_REG))
+ || (mips_opts.mips16
+ && (((prev_pinfo & MIPS16_INSN_WRITE_X)
+ && insn_uses_reg (ip,
+ ((prev_insn.insn_opcode
+ >> MIPS16OP_SH_RX)
+ & MIPS16OP_MASK_RX),
+ MIPS16_REG))
+ || ((prev_pinfo & MIPS16_INSN_WRITE_Y)
+ && insn_uses_reg (ip,
+ ((prev_insn.insn_opcode
+ >> MIPS16OP_SH_RY)
+ & MIPS16OP_MASK_RY),
+ MIPS16_REG))
+ || ((prev_pinfo & MIPS16_INSN_WRITE_Z)
+ && insn_uses_reg (ip,
+ ((prev_insn.insn_opcode
+ >> MIPS16OP_SH_RZ)
+ & MIPS16OP_MASK_RZ),
+ MIPS16_REG))
+ || ((prev_pinfo & MIPS16_INSN_WRITE_T)
+ && insn_uses_reg (ip, TREG, MIPS_GR_REG))
+ || ((prev_pinfo & MIPS16_INSN_WRITE_31)
+ && insn_uses_reg (ip, RA, MIPS_GR_REG))
+ || ((prev_pinfo & MIPS16_INSN_WRITE_GPR_Y)
+ && insn_uses_reg (ip,
+ MIPS16OP_EXTRACT_REG32R (prev_insn.
+ insn_opcode),
+ MIPS_GR_REG))))
/* If the branch writes a register that the previous
instruction sets, we can not swap (we know that
branches write only to RD or to $31). */
- || ((prev_pinfo & INSN_WRITE_GPR_T)
+ || (! mips_opts.mips16
+ && (prev_pinfo & INSN_WRITE_GPR_T)
&& (((pinfo & INSN_WRITE_GPR_D)
&& (((prev_insn.insn_opcode >> OP_SH_RT) & OP_MASK_RT)
== ((ip->insn_opcode >> OP_SH_RD) & OP_MASK_RD)))
&& (((prev_insn.insn_opcode >> OP_SH_RT)
& OP_MASK_RT)
== 31))))
- || ((prev_pinfo & INSN_WRITE_GPR_D)
+ || (! mips_opts.mips16
+ && (prev_pinfo & INSN_WRITE_GPR_D)
&& (((pinfo & INSN_WRITE_GPR_D)
&& (((prev_insn.insn_opcode >> OP_SH_RD) & OP_MASK_RD)
== ((ip->insn_opcode >> OP_SH_RD) & OP_MASK_RD)))
&& (((prev_insn.insn_opcode >> OP_SH_RD)
& OP_MASK_RD)
== 31))))
+ || (mips_opts.mips16
+ && (pinfo & MIPS16_INSN_WRITE_31)
+ && ((prev_pinfo & MIPS16_INSN_WRITE_31)
+ || ((prev_pinfo & MIPS16_INSN_WRITE_GPR_Y)
+ && (MIPS16OP_EXTRACT_REG32R (prev_insn.insn_opcode)
+ == RA))))
/* If the branch writes a register that the previous
instruction reads, we can not swap (we know that
branches only write to RD or to $31). */
- || ((pinfo & INSN_WRITE_GPR_D)
+ || (! mips_opts.mips16
+ && (pinfo & INSN_WRITE_GPR_D)
&& insn_uses_reg (&prev_insn,
((ip->insn_opcode >> OP_SH_RD)
& OP_MASK_RD),
- 0))
- || ((pinfo & INSN_WRITE_GPR_31)
- && insn_uses_reg (&prev_insn, 31, 0))
+ MIPS_GR_REG))
+ || (! mips_opts.mips16
+ && (pinfo & INSN_WRITE_GPR_31)
+ && insn_uses_reg (&prev_insn, 31, MIPS_GR_REG))
+ || (mips_opts.mips16
+ && (pinfo & MIPS16_INSN_WRITE_31)
+ && insn_uses_reg (&prev_insn, RA, MIPS_GR_REG))
/* If we are generating embedded PIC code, the branch
might be expanded into a sequence which uses $at, so
we can't swap with an instruction which reads it. */
|| (mips_pic == EMBEDDED_PIC
- && insn_uses_reg (&prev_insn, AT, 0))
+ && insn_uses_reg (&prev_insn, AT, MIPS_GR_REG))
/* If the previous previous instruction has a load
delay, and sets a register that the branch reads, we
can not swap. */
- || (((prev_prev_insn.insn_mo->pinfo & INSN_LOAD_COPROC_DELAY)
- || (mips_isa < 2
- && (prev_prev_insn.insn_mo->pinfo
- & INSN_LOAD_MEMORY_DELAY)))
+ || (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ /* Itbl support may require additional care here. */
+ && ((prev_prev_insn.insn_mo->pinfo & INSN_LOAD_COPROC_DELAY)
+ || (! gpr_interlocks
+ && (prev_prev_insn.insn_mo->pinfo
+ & INSN_LOAD_MEMORY_DELAY)))
&& insn_uses_reg (ip,
((prev_prev_insn.insn_opcode >> OP_SH_RT)
& OP_MASK_RT),
- 0)))
+ MIPS_GR_REG))
+ /* If one instruction sets a condition code and the
+ other one uses a condition code, we can not swap. */
+ || ((pinfo & INSN_READ_COND_CODE)
+ && (prev_pinfo & INSN_WRITE_COND_CODE))
+ || ((pinfo & INSN_WRITE_COND_CODE)
+ && (prev_pinfo & INSN_READ_COND_CODE))
+ /* If the previous instruction uses the PC, we can not
+ swap. */
+ || (mips_opts.mips16
+ && (prev_pinfo & MIPS16_INSN_READ_PC))
+ /* If the previous instruction was extended, we can not
+ swap. */
+ || (mips_opts.mips16 && prev_insn_extended)
+ /* If the previous instruction had a fixup in mips16
+ mode, we can not swap. This normally means that the
+ previous instruction was a 4 byte branch anyhow. */
+ || (mips_opts.mips16 && prev_insn_fixp)
+ /* If the previous instruction is a sync, sync.l, or
+ sync.p, we can not swap. */
+ || (prev_pinfo & INSN_SYNC))
{
/* We could do even better for unconditional branches to
portions of this object file; we could pick up the
}
else
{
- char *prev_f;
- char temp[4];
-
/* It looks like we can actually do the swap. */
- prev_f = prev_insn_frag->fr_literal + prev_insn_where;
- memcpy (temp, prev_f, 4);
- memcpy (prev_f, f, 4);
- memcpy (f, temp, 4);
- if (prev_insn_fixp)
+ if (! mips_opts.mips16)
{
- prev_insn_fixp->fx_frag = frag_now;
- prev_insn_fixp->fx_where = f - frag_now->fr_literal;
+ char *prev_f;
+ char temp[4];
+
+ prev_f = prev_insn_frag->fr_literal + prev_insn_where;
+ memcpy (temp, prev_f, 4);
+ memcpy (prev_f, f, 4);
+ memcpy (f, temp, 4);
+ if (prev_insn_fixp)
+ {
+ prev_insn_fixp->fx_frag = frag_now;
+ prev_insn_fixp->fx_where = f - frag_now->fr_literal;
+ }
+ if (fixp)
+ {
+ fixp->fx_frag = prev_insn_frag;
+ fixp->fx_where = prev_insn_where;
+ }
}
- if (fixp)
+ else
{
- fixp->fx_frag = prev_insn_frag;
- fixp->fx_where = prev_insn_where;
+ char *prev_f;
+ char temp[2];
+
+ assert (prev_insn_fixp == NULL);
+ prev_f = prev_insn_frag->fr_literal + prev_insn_where;
+ memcpy (temp, prev_f, 2);
+ memcpy (prev_f, f, 2);
+ if (reloc_type != BFD_RELOC_MIPS16_JMP)
+ {
+ assert (reloc_type == BFD_RELOC_UNUSED);
+ memcpy (f, temp, 2);
+ }
+ else
+ {
+ memcpy (f, f + 2, 2);
+ memcpy (f + 2, temp, 2);
+ }
+ if (fixp)
+ {
+ fixp->fx_frag = prev_insn_frag;
+ fixp->fx_where = prev_insn_where;
+ }
}
+
/* Update the previous insn information; leave prev_insn
unchanged. */
prev_prev_insn = *ip;
prev_prev_insn.insn_mo = &dummy_opcode;
prev_insn.insn_mo = &dummy_opcode;
}
+
+ prev_insn_fixp = NULL;
+ prev_insn_reloc_type = BFD_RELOC_UNUSED;
+ prev_insn_extended = 0;
}
else if (pinfo & INSN_COND_BRANCH_LIKELY)
{
/* Update the previous insn information. */
prev_prev_insn = *ip;
prev_insn.insn_mo = &dummy_opcode;
+ prev_insn_fixp = NULL;
+ prev_insn_reloc_type = BFD_RELOC_UNUSED;
+ prev_insn_extended = 0;
}
else
{
immediately; since this insn is not a branch, we know it
is not in a delay slot. */
prev_insn_is_delay_slot = 0;
+
+ prev_insn_fixp = fixp;
+ prev_insn_reloc_type = reloc_type;
+ if (mips_opts.mips16)
+ prev_insn_extended = (ip->use_extend
+ || reloc_type > BFD_RELOC_UNUSED);
}
prev_prev_insn_unreordered = prev_insn_unreordered;
prev_insn_unreordered = 0;
prev_insn_frag = frag_now;
prev_insn_where = f - frag_now->fr_literal;
- prev_insn_fixp = fixp;
prev_insn_valid = 1;
}
+ else if (place == NULL)
+ {
+ /* We need to record a bit of information even when we are not
+ reordering, in order to determine the base address for mips16
+ PC relative relocs. */
+ prev_prev_insn = prev_insn;
+ prev_insn = *ip;
+ prev_insn_reloc_type = reloc_type;
+ prev_prev_insn_unreordered = prev_insn_unreordered;
+ prev_insn_unreordered = 1;
+ }
/* We just output an insn, so the next one doesn't have a label. */
- insn_label = NULL;
+ mips_clear_insn_labels ();
+
+ /* We must ensure that a fixup associated with an unmatched %hi
+ reloc does not become a variant frag. Otherwise, the
+ rearrangement of %hi relocs in frob_file may confuse
+ tc_gen_reloc. */
+ if (unmatched_hi)
+ {
+ frag_wane (frag_now);
+ frag_new (0);
+ }
}
/* This function forgets that there was any previous instruction or
- label. */
+ label. If PRESERVE is non-zero, it remembers enough information to
+ know whether nops are needed before a noreorder section. */
static void
-mips_no_prev_insn ()
+mips_no_prev_insn (preserve)
+ int preserve;
{
- prev_insn.insn_mo = &dummy_opcode;
- prev_prev_insn.insn_mo = &dummy_opcode;
+ if (! preserve)
+ {
+ prev_insn.insn_mo = &dummy_opcode;
+ prev_prev_insn.insn_mo = &dummy_opcode;
+ prev_nop_frag = NULL;
+ prev_nop_frag_holds = 0;
+ prev_nop_frag_required = 0;
+ prev_nop_frag_since = 0;
+ }
prev_insn_valid = 0;
prev_insn_is_delay_slot = 0;
prev_insn_unreordered = 0;
+ prev_insn_extended = 0;
+ prev_insn_reloc_type = BFD_RELOC_UNUSED;
prev_prev_insn_unreordered = 0;
- insn_label = NULL;
+ mips_clear_insn_labels ();
}
/* This function must be called whenever we turn on noreorder or emit
something other than instructions. It inserts any NOPS which might
be needed by the previous instruction, and clears the information
- kept for the previous instructions. */
+ kept for the previous instructions. The INSNS parameter is true if
+ instructions are to follow. */
static void
-mips_emit_delays ()
+mips_emit_delays (insns)
+ boolean insns;
{
- if (! mips_noreorder)
- {
- int nop;
-
- nop = 0;
- if ((prev_insn.insn_mo->pinfo
- & (INSN_LOAD_COPROC_DELAY
- | INSN_COPROC_MOVE_DELAY
- | INSN_WRITE_COND_CODE
- | INSN_READ_LO
- | INSN_READ_HI))
- || (mips_isa < 2
+ if (! mips_opts.noreorder)
+ {
+ int nops;
+
+ nops = 0;
+ if ((! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ && (! cop_interlocks
+ && (prev_insn.insn_mo->pinfo
+ & (INSN_LOAD_COPROC_DELAY
+ | INSN_COPROC_MOVE_DELAY
+ | INSN_WRITE_COND_CODE))))
+ || (! hilo_interlocks
&& (prev_insn.insn_mo->pinfo
- & (INSN_LOAD_MEMORY_DELAY
- | INSN_COPROC_MEMORY_DELAY))))
+ & (INSN_READ_LO
+ | INSN_READ_HI)))
+ || (! mips_opts.mips16
+ && ! gpr_interlocks
+ && (prev_insn.insn_mo->pinfo
+ & INSN_LOAD_MEMORY_DELAY))
+ || (! mips_opts.mips16
+ && mips_opts.isa == ISA_MIPS1
+ && (prev_insn.insn_mo->pinfo
+ & INSN_COPROC_MEMORY_DELAY)))
+ {
+ /* Itbl support may require additional care here. */
+ ++nops;
+ if ((! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ && (! cop_interlocks
+ && prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE))
+ || (! hilo_interlocks
+ && ((prev_insn.insn_mo->pinfo & INSN_READ_HI)
+ || (prev_insn.insn_mo->pinfo & INSN_READ_LO))))
+ ++nops;
+
+ if (prev_insn_unreordered)
+ nops = 0;
+ }
+ else if ((! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ && (! cop_interlocks
+ && prev_prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE))
+ || (! hilo_interlocks
+ && ((prev_prev_insn.insn_mo->pinfo & INSN_READ_HI)
+ || (prev_prev_insn.insn_mo->pinfo & INSN_READ_LO))))
{
- nop = 1;
- if ((prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE)
- || (prev_insn.insn_mo->pinfo & INSN_READ_HI)
- || (prev_insn.insn_mo->pinfo & INSN_READ_LO))
- emit_nop ();
+ /* Itbl support may require additional care here. */
+ if (! prev_prev_insn_unreordered)
+ ++nops;
}
- else if ((prev_prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE)
- || (prev_prev_insn.insn_mo->pinfo & INSN_READ_HI)
- || (prev_prev_insn.insn_mo->pinfo & INSN_READ_LO))
- nop = 1;
- if (nop)
+
+ if (nops > 0)
{
- emit_nop ();
- if (insn_label != NULL)
+ struct insn_label_list *l;
+
+ if (insns)
+ {
+ /* Record the frag which holds the nop instructions, so
+ that we can remove them if we don't need them. */
+ frag_grow (mips_opts.mips16 ? nops * 2 : nops * 4);
+ prev_nop_frag = frag_now;
+ prev_nop_frag_holds = nops;
+ prev_nop_frag_required = 0;
+ prev_nop_frag_since = 0;
+ }
+
+ for (; nops > 0; --nops)
+ emit_nop ();
+
+ if (insns)
+ {
+ /* Move on to a new frag, so that it is safe to simply
+ decrease the size of prev_nop_frag. */
+ frag_wane (frag_now);
+ frag_new (0);
+ }
+
+ for (l = insn_labels; l != NULL; l = l->next)
{
- assert (S_GET_SEGMENT (insn_label) == now_seg);
- insn_label->sy_frag = frag_now;
- S_SET_VALUE (insn_label, (valueT) frag_now_fix ());
+ assert (S_GET_SEGMENT (l->label) == now_seg);
+ symbol_set_frag (l->label, frag_now);
+ S_SET_VALUE (l->label, (valueT) frag_now_fix ());
+ /* mips16 text labels are stored as odd. */
+ if (mips_opts.mips16)
+ S_SET_VALUE (l->label, S_GET_VALUE (l->label) + 1);
}
}
}
- mips_no_prev_insn ();
+ /* Mark instruction labels in mips16 mode. */
+ if (mips_opts.mips16 && insns)
+ mips16_mark_labels ();
+
+ mips_no_prev_insn (insns);
}
/* Build an instruction created by a macro expansion. This is passed
expression, the name of the instruction to build, an operand format
string, and corresponding arguments. */
-#ifndef NO_STDARG
+#ifdef USE_STDARG
static void
macro_build (char *place,
int *counter,
const char *name,
const char *fmt,
...)
-#else /* ! defined (NO_STDARG) */
+#else
static void
macro_build (place, counter, ep, name, fmt, va_alist)
char *place;
const char *name;
const char *fmt;
va_dcl
-#endif /* ! defined (NO_STDARG) */
+#endif
{
struct mips_cl_insn insn;
bfd_reloc_code_real_type r;
va_list args;
-#ifndef NO_STDARG
+#ifdef USE_STDARG
va_start (args, fmt);
#else
va_start (args);
* print a warning if needed. We need to pass ip as a parameter
* to generate a better warning message here...
*/
- if (mips_warn_about_macros && place == NULL && *counter == 1)
- as_warn ("Macro instruction expanded into multiple instructions");
+ if (mips_opts.warn_about_macros && place == NULL && *counter == 1)
+ as_warn (_("Macro instruction expanded into multiple instructions"));
if (place == NULL)
*counter += 1; /* bump instruction counter */
+ if (mips_opts.mips16)
+ {
+ mips16_macro_build (place, counter, ep, name, fmt, args);
+ va_end (args);
+ return;
+ }
+
r = BFD_RELOC_UNUSED;
insn.insn_mo = (struct mips_opcode *) hash_find (op_hash, name);
assert (insn.insn_mo);
assert (strcmp (name, insn.insn_mo->name) == 0);
- while (strcmp (fmt, insn.insn_mo->args) != 0
- || insn.insn_mo->pinfo == INSN_MACRO)
+ /* Search until we get a match for NAME. */
+ while (1)
{
+ if (strcmp (fmt, insn.insn_mo->args) == 0
+ && insn.insn_mo->pinfo != INSN_MACRO
+ && OPCODE_IS_MEMBER (insn.insn_mo, mips_opts.isa, mips_cpu,
+ mips_gp32)
+ && (mips_cpu != CPU_R4650 || (insn.insn_mo->pinfo & FP_D) == 0))
+ break;
+
++insn.insn_mo;
assert (insn.insn_mo->name);
assert (strcmp (name, insn.insn_mo->name) == 0);
}
+
insn.insn_opcode = insn.insn_mo->match;
for (;;)
{
insn.insn_opcode |= va_arg (args, int) << 11;
continue;
+ case 'U':
+ {
+ int tmp = va_arg (args, int);
+
+ insn.insn_opcode |= tmp << 16;
+ insn.insn_opcode |= tmp << 11;
+ continue;
+ }
+
case 'V':
case 'S':
insn.insn_opcode |= va_arg (args, int) << 11;
insn.insn_opcode |= va_arg (args, int) << 6;
continue;
+ case 'J':
+ insn.insn_opcode |= va_arg (args, int) << 6;
+ continue;
+
+ case 'q':
+ insn.insn_opcode |= va_arg (args, int) << 6;
+ continue;
+
case 'b':
case 's':
case 'r':
|| r == BFD_RELOC_LO16
|| r == BFD_RELOC_MIPS_GOT16
|| r == BFD_RELOC_MIPS_CALL16
+ || r == BFD_RELOC_MIPS_GOT_LO16
+ || r == BFD_RELOC_MIPS_CALL_LO16
|| (ep->X_op == O_subtract
- && now_seg == text_section
&& r == BFD_RELOC_PCREL_LO16));
continue;
&& (ep->X_op == O_constant
|| (ep->X_op == O_symbol
&& (r == BFD_RELOC_HI16_S
- || r == BFD_RELOC_HI16))
+ || r == BFD_RELOC_HI16
+ || r == BFD_RELOC_MIPS_GOT_HI16
+ || r == BFD_RELOC_MIPS_CALL_HI16))
|| (ep->X_op == O_subtract
- && now_seg == text_section
&& r == BFD_RELOC_PCREL_HI16_S)));
if (ep->X_op == O_constant)
{
r = BFD_RELOC_MIPS_JMP;
continue;
+ case 'C':
+ insn.insn_opcode |= va_arg (args, unsigned long);
+ continue;
+
default:
internalError ();
}
va_end (args);
assert (r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
- append_insn (place, &insn, ep, r);
+ append_insn (place, &insn, ep, r, false);
}
-/*
- * Generate a "lui" instruction.
- */
static void
-macro_build_lui (place, counter, ep, regnum)
+mips16_macro_build (place, counter, ep, name, fmt, args)
char *place;
- int *counter;
+ int *counter ATTRIBUTE_UNUSED;
expressionS *ep;
- int regnum;
+ const char *name;
+ const char *fmt;
+ va_list args;
{
- expressionS high_expr;
struct mips_cl_insn insn;
bfd_reloc_code_real_type r;
- CONST char *name = "lui";
- CONST char *fmt = "t,u";
- if (place == NULL)
- high_expr = *ep;
- else
- {
- high_expr.X_op = O_constant;
- high_expr.X_add_number = 0;
- }
+ r = BFD_RELOC_UNUSED;
+ insn.insn_mo = (struct mips_opcode *) hash_find (mips16_op_hash, name);
+ assert (insn.insn_mo);
+ assert (strcmp (name, insn.insn_mo->name) == 0);
- if (high_expr.X_op == O_constant)
- {
- /* we can compute the instruction now without a relocation entry */
- if (high_expr.X_add_number & 0x8000)
- high_expr.X_add_number += 0x10000;
- high_expr.X_add_number =
- ((unsigned long) high_expr.X_add_number >> 16) & 0xffff;
- r = BFD_RELOC_UNUSED;
- }
- else
+ while (strcmp (fmt, insn.insn_mo->args) != 0
+ || insn.insn_mo->pinfo == INSN_MACRO)
{
- assert (ep->X_op == O_symbol);
- /* _gp_disp is a special case, used from s_cpload. */
- assert (mips_pic == NO_PIC
- || strcmp (S_GET_NAME (ep->X_add_symbol), "_gp_disp") == 0);
- r = BFD_RELOC_HI16_S;
+ ++insn.insn_mo;
+ assert (insn.insn_mo->name);
+ assert (strcmp (name, insn.insn_mo->name) == 0);
}
- /*
- * If the macro is about to expand into a second instruction,
- * print a warning if needed. We need to pass ip as a parameter
- * to generate a better warning message here...
- */
- if (mips_warn_about_macros && place == NULL && *counter == 1)
- as_warn ("Macro instruction expanded into multiple instructions");
+ insn.insn_opcode = insn.insn_mo->match;
+ insn.use_extend = false;
- if (place == NULL)
- *counter += 1; /* bump instruction counter */
+ for (;;)
+ {
+ int c;
- insn.insn_mo = (struct mips_opcode *) hash_find (op_hash, name);
- assert (insn.insn_mo);
- assert (strcmp (name, insn.insn_mo->name) == 0);
- assert (strcmp (fmt, insn.insn_mo->args) == 0);
+ c = *fmt++;
+ switch (c)
+ {
+ case '\0':
+ break;
- insn.insn_opcode = insn.insn_mo->match | (regnum << OP_SH_RT);
- if (r == BFD_RELOC_UNUSED)
- {
- insn.insn_opcode |= high_expr.X_add_number;
- append_insn (place, &insn, NULL, r);
- }
- else
- append_insn (place, &insn, &high_expr, r);
-}
+ case ',':
+ case '(':
+ case ')':
+ continue;
-/* set_at()
- * Generates code to set the $at register to true (one)
- * if reg is less than the immediate expression.
+ case 'y':
+ case 'w':
+ insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_RY;
+ continue;
+
+ case 'x':
+ case 'v':
+ insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_RX;
+ continue;
+
+ case 'z':
+ insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_RZ;
+ continue;
+
+ case 'Z':
+ insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_MOVE32Z;
+ continue;
+
+ case '0':
+ case 'S':
+ case 'P':
+ case 'R':
+ continue;
+
+ case 'X':
+ insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_REGR32;
+ continue;
+
+ case 'Y':
+ {
+ int regno;
+
+ regno = va_arg (args, int);
+ regno = ((regno & 7) << 2) | ((regno & 0x18) >> 3);
+ insn.insn_opcode |= regno << MIPS16OP_SH_REG32R;
+ }
+ continue;
+
+ case '<':
+ case '>':
+ case '4':
+ case '5':
+ case 'H':
+ case 'W':
+ case 'D':
+ case 'j':
+ case '8':
+ case 'V':
+ case 'C':
+ case 'U':
+ case 'k':
+ case 'K':
+ case 'p':
+ case 'q':
+ {
+ assert (ep != NULL);
+
+ if (ep->X_op != O_constant)
+ r = BFD_RELOC_UNUSED + c;
+ else
+ {
+ mips16_immed ((char *) NULL, 0, c, ep->X_add_number, false,
+ false, false, &insn.insn_opcode,
+ &insn.use_extend, &insn.extend);
+ ep = NULL;
+ r = BFD_RELOC_UNUSED;
+ }
+ }
+ continue;
+
+ case '6':
+ insn.insn_opcode |= va_arg (args, int) << MIPS16OP_SH_IMM6;
+ continue;
+ }
+
+ break;
+ }
+
+ assert (r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL);
+
+ append_insn (place, &insn, ep, r, false);
+}
+
+/*
+ * Generate a "lui" instruction.
+ */
+static void
+macro_build_lui (place, counter, ep, regnum)
+ char *place;
+ int *counter;
+ expressionS *ep;
+ int regnum;
+{
+ expressionS high_expr;
+ struct mips_cl_insn insn;
+ bfd_reloc_code_real_type r;
+ CONST char *name = "lui";
+ CONST char *fmt = "t,u";
+
+ assert (! mips_opts.mips16);
+
+ if (place == NULL)
+ high_expr = *ep;
+ else
+ {
+ high_expr.X_op = O_constant;
+ high_expr.X_add_number = ep->X_add_number;
+ }
+
+ if (high_expr.X_op == O_constant)
+ {
+ /* we can compute the instruction now without a relocation entry */
+ if (high_expr.X_add_number & 0x8000)
+ high_expr.X_add_number += 0x10000;
+ high_expr.X_add_number =
+ ((unsigned long) high_expr.X_add_number >> 16) & 0xffff;
+ r = BFD_RELOC_UNUSED;
+ }
+ else
+ {
+ assert (ep->X_op == O_symbol);
+ /* _gp_disp is a special case, used from s_cpload. */
+ assert (mips_pic == NO_PIC
+ || strcmp (S_GET_NAME (ep->X_add_symbol), "_gp_disp") == 0);
+ r = BFD_RELOC_HI16_S;
+ }
+
+ /*
+ * If the macro is about to expand into a second instruction,
+ * print a warning if needed. We need to pass ip as a parameter
+ * to generate a better warning message here...
+ */
+ if (mips_opts.warn_about_macros && place == NULL && *counter == 1)
+ as_warn (_("Macro instruction expanded into multiple instructions"));
+
+ if (place == NULL)
+ *counter += 1; /* bump instruction counter */
+
+ insn.insn_mo = (struct mips_opcode *) hash_find (op_hash, name);
+ assert (insn.insn_mo);
+ assert (strcmp (name, insn.insn_mo->name) == 0);
+ assert (strcmp (fmt, insn.insn_mo->args) == 0);
+
+ insn.insn_opcode = insn.insn_mo->match | (regnum << OP_SH_RT);
+ if (r == BFD_RELOC_UNUSED)
+ {
+ insn.insn_opcode |= high_expr.X_add_number;
+ append_insn (place, &insn, NULL, r, false);
+ }
+ else
+ append_insn (place, &insn, &high_expr, r, false);
+}
+
+/* set_at()
+ * Generates code to set the $at register to true (one)
+ * if reg is less than the immediate expression.
*/
static void
set_at (counter, reg, unsignedp)
int reg;
int unsignedp;
{
- if (imm_expr.X_add_number >= -0x8000 && imm_expr.X_add_number < 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
macro_build ((char *) NULL, counter, &imm_expr,
unsignedp ? "sltiu" : "slti",
"t,r,j", AT, reg, (int) BFD_RELOC_LO16);
else
{
- load_register (counter, AT, &imm_expr);
+ load_register (counter, AT, &imm_expr, 0);
macro_build ((char *) NULL, counter, NULL,
unsignedp ? "sltu" : "slt",
"d,v,t", AT, reg, AT);
struct mips_cl_insn *ip;
expressionS *ex;
{
- if (ex->X_op != O_constant)
- as_warn ("Instruction %s requires absolute expression", ip->insn_mo->name);
+ if (ex->X_op == O_big)
+ as_bad (_("unsupported large constant"));
+ else if (ex->X_op != O_constant)
+ as_bad (_("Instruction %s requires absolute expression"), ip->insn_mo->name);
}
+/* Count the leading zeroes by performing a binary chop. This is a
+ bulky bit of source, but performance is a LOT better for the
+ majority of values than a simple loop to count the bits:
+ for (lcnt = 0; (lcnt < 32); lcnt++)
+ if ((v) & (1 << (31 - lcnt)))
+ break;
+ However it is not code size friendly, and the gain will drop a bit
+ on certain cached systems.
+*/
+#define COUNT_TOP_ZEROES(v) \
+ (((v) & ~0xffff) == 0 \
+ ? ((v) & ~0xff) == 0 \
+ ? ((v) & ~0xf) == 0 \
+ ? ((v) & ~0x3) == 0 \
+ ? ((v) & ~0x1) == 0 \
+ ? !(v) \
+ ? 32 \
+ : 31 \
+ : 30 \
+ : ((v) & ~0x7) == 0 \
+ ? 29 \
+ : 28 \
+ : ((v) & ~0x3f) == 0 \
+ ? ((v) & ~0x1f) == 0 \
+ ? 27 \
+ : 26 \
+ : ((v) & ~0x7f) == 0 \
+ ? 25 \
+ : 24 \
+ : ((v) & ~0xfff) == 0 \
+ ? ((v) & ~0x3ff) == 0 \
+ ? ((v) & ~0x1ff) == 0 \
+ ? 23 \
+ : 22 \
+ : ((v) & ~0x7ff) == 0 \
+ ? 21 \
+ : 20 \
+ : ((v) & ~0x3fff) == 0 \
+ ? ((v) & ~0x1fff) == 0 \
+ ? 19 \
+ : 18 \
+ : ((v) & ~0x7fff) == 0 \
+ ? 17 \
+ : 16 \
+ : ((v) & ~0xffffff) == 0 \
+ ? ((v) & ~0xfffff) == 0 \
+ ? ((v) & ~0x3ffff) == 0 \
+ ? ((v) & ~0x1ffff) == 0 \
+ ? 15 \
+ : 14 \
+ : ((v) & ~0x7ffff) == 0 \
+ ? 13 \
+ : 12 \
+ : ((v) & ~0x3fffff) == 0 \
+ ? ((v) & ~0x1fffff) == 0 \
+ ? 11 \
+ : 10 \
+ : ((v) & ~0x7fffff) == 0 \
+ ? 9 \
+ : 8 \
+ : ((v) & ~0xfffffff) == 0 \
+ ? ((v) & ~0x3ffffff) == 0 \
+ ? ((v) & ~0x1ffffff) == 0 \
+ ? 7 \
+ : 6 \
+ : ((v) & ~0x7ffffff) == 0 \
+ ? 5 \
+ : 4 \
+ : ((v) & ~0x3fffffff) == 0 \
+ ? ((v) & ~0x1fffffff) == 0 \
+ ? 3 \
+ : 2 \
+ : ((v) & ~0x7fffffff) == 0 \
+ ? 1 \
+ : 0)
+
/* load_register()
* This routine generates the least number of instructions neccessary to load
* an absolute expression value into a register.
*/
static void
-load_register (counter, reg, ep)
+load_register (counter, reg, ep, dbl)
int *counter;
int reg;
expressionS *ep;
+ int dbl;
{
- int shift;
+ int freg;
expressionS hi32, lo32;
if (ep->X_op != O_big)
{
assert (ep->X_op == O_constant);
- if (ep->X_add_number >= -0x8000 && ep->X_add_number < 0x8000)
+ if (ep->X_add_number < 0x8000
+ && (ep->X_add_number >= 0
+ || (ep->X_add_number >= -0x8000
+ && (! dbl
+ || ! ep->X_unsigned
+ || sizeof (ep->X_add_number) > 4))))
{
/* We can handle 16 bit signed values with an addiu to
$zero. No need to ever use daddiu here, since $zero and
(int) BFD_RELOC_LO16);
return;
}
- else if ((ep->X_add_number &~ (offsetT) 0x7fffffff) == 0
- || ((ep->X_add_number &~ (offsetT) 0x7fffffff)
- == ~ (offsetT) 0x7fffffff))
+ else if ((((ep->X_add_number &~ (offsetT) 0x7fffffff) == 0
+ || ((ep->X_add_number &~ (offsetT) 0x7fffffff)
+ == ~ (offsetT) 0x7fffffff))
+ && (! dbl
+ || ! ep->X_unsigned
+ || sizeof (ep->X_add_number) > 4
+ || (ep->X_add_number & 0x80000000) == 0))
+ || ((! ISA_HAS_64BIT_REGS (mips_opts.isa) || ! dbl)
+ && (ep->X_add_number &~ (offsetT) 0xffffffff) == 0)
+ || (! ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && ! dbl
+ && ((ep->X_add_number &~ (offsetT) 0xffffffff)
+ == ~ (offsetT) 0xffffffff)))
{
/* 32 bit values require an lui. */
macro_build ((char *) NULL, counter, ep, "lui", "t,u", reg,
/* The value is larger than 32 bits. */
- if (mips_isa < 3)
+ if (! ISA_HAS_64BIT_REGS (mips_opts.isa))
{
- as_bad ("Number larger than 32 bits");
+ as_bad (_("Number larger than 32 bits"));
macro_build ((char *) NULL, counter, ep, "addiu", "t,r,j", reg, 0,
(int) BFD_RELOC_LO16);
return;
if (ep->X_op != O_big)
{
hi32 = *ep;
- shift = 32;
- hi32.X_add_number >>= shift;
+ hi32.X_add_number = (valueT) hi32.X_add_number >> 16;
+ hi32.X_add_number = (valueT) hi32.X_add_number >> 16;
hi32.X_add_number &= 0xffffffff;
- if ((hi32.X_add_number & 0x80000000) != 0)
- hi32.X_add_number |= ~ (offsetT) 0xffffffff;
lo32 = *ep;
lo32.X_add_number &= 0xffffffff;
}
if (ep->X_add_number == 3)
generic_bignum[3] = 0;
else if (ep->X_add_number > 4)
- as_bad ("Number larger than 64 bits");
+ as_bad (_("Number larger than 64 bits"));
lo32.X_op = O_constant;
lo32.X_add_number = generic_bignum[0] + (generic_bignum[1] << 16);
hi32.X_op = O_constant;
hi32.X_add_number = generic_bignum[2] + (generic_bignum[3] << 16);
}
- load_register (counter, reg, &hi32);
+ if (hi32.X_add_number == 0)
+ freg = 0;
+ else
+ {
+ int shift, bit;
+ unsigned long hi, lo;
+
+ if (hi32.X_add_number == 0xffffffff)
+ {
+ if ((lo32.X_add_number & 0xffff8000) == 0xffff8000)
+ {
+ macro_build ((char *) NULL, counter, &lo32, "addiu", "t,r,j",
+ reg, 0, (int) BFD_RELOC_LO16);
+ return;
+ }
+ if (lo32.X_add_number & 0x80000000)
+ {
+ macro_build ((char *) NULL, counter, &lo32, "lui", "t,u", reg,
+ (int) BFD_RELOC_HI16);
+ if (lo32.X_add_number & 0xffff)
+ macro_build ((char *) NULL, counter, &lo32, "ori", "t,r,i",
+ reg, reg, (int) BFD_RELOC_LO16);
+ return;
+ }
+ }
+
+ /* Check for 16bit shifted constant. We know that hi32 is
+ non-zero, so start the mask on the first bit of the hi32
+ value. */
+ shift = 17;
+ do
+ {
+ unsigned long himask, lomask;
+
+ if (shift < 32)
+ {
+ himask = 0xffff >> (32 - shift);
+ lomask = (0xffff << shift) & 0xffffffff;
+ }
+ else
+ {
+ himask = 0xffff << (shift - 32);
+ lomask = 0;
+ }
+ if ((hi32.X_add_number & ~(offsetT) himask) == 0
+ && (lo32.X_add_number & ~(offsetT) lomask) == 0)
+ {
+ expressionS tmp;
+
+ tmp.X_op = O_constant;
+ if (shift < 32)
+ tmp.X_add_number = ((hi32.X_add_number << (32 - shift))
+ | (lo32.X_add_number >> shift));
+ else
+ tmp.X_add_number = hi32.X_add_number >> (shift - 32);
+ macro_build ((char *) NULL, counter, &tmp,
+ "ori", "t,r,i", reg, 0,
+ (int) BFD_RELOC_LO16);
+ macro_build ((char *) NULL, counter, NULL,
+ (shift >= 32) ? "dsll32" : "dsll",
+ "d,w,<", reg, reg,
+ (shift >= 32) ? shift - 32 : shift);
+ return;
+ }
+ shift++;
+ }
+ while (shift <= (64 - 16));
+
+ /* Find the bit number of the lowest one bit, and store the
+ shifted value in hi/lo. */
+ hi = (unsigned long) (hi32.X_add_number & 0xffffffff);
+ lo = (unsigned long) (lo32.X_add_number & 0xffffffff);
+ if (lo != 0)
+ {
+ bit = 0;
+ while ((lo & 1) == 0)
+ {
+ lo >>= 1;
+ ++bit;
+ }
+ lo |= (hi & (((unsigned long) 1 << bit) - 1)) << (32 - bit);
+ hi >>= bit;
+ }
+ else
+ {
+ bit = 32;
+ while ((hi & 1) == 0)
+ {
+ hi >>= 1;
+ ++bit;
+ }
+ lo = hi;
+ hi = 0;
+ }
+
+ /* Optimize if the shifted value is a (power of 2) - 1. */
+ if ((hi == 0 && ((lo + 1) & lo) == 0)
+ || (lo == 0xffffffff && ((hi + 1) & hi) == 0))
+ {
+ shift = COUNT_TOP_ZEROES ((unsigned int) hi32.X_add_number);
+ if (shift != 0)
+ {
+ expressionS tmp;
+
+ /* This instruction will set the register to be all
+ ones. */
+ tmp.X_op = O_constant;
+ tmp.X_add_number = (offsetT) -1;
+ macro_build ((char *) NULL, counter, &tmp, "addiu", "t,r,j",
+ reg, 0, (int) BFD_RELOC_LO16);
+ if (bit != 0)
+ {
+ bit += shift;
+ macro_build ((char *) NULL, counter, NULL,
+ (bit >= 32) ? "dsll32" : "dsll",
+ "d,w,<", reg, reg,
+ (bit >= 32) ? bit - 32 : bit);
+ }
+ macro_build ((char *) NULL, counter, NULL,
+ (shift >= 32) ? "dsrl32" : "dsrl",
+ "d,w,<", reg, reg,
+ (shift >= 32) ? shift - 32 : shift);
+ return;
+ }
+ }
+
+ /* Sign extend hi32 before calling load_register, because we can
+ generally get better code when we load a sign extended value. */
+ if ((hi32.X_add_number & 0x80000000) != 0)
+ hi32.X_add_number |= ~(offsetT) 0xffffffff;
+ load_register (counter, reg, &hi32, 0);
+ freg = reg;
+ }
if ((lo32.X_add_number & 0xffff0000) == 0)
- macro_build ((char *) NULL, counter, NULL, "dsll32", "d,w,<", reg,
- reg, 0);
+ {
+ if (freg != 0)
+ {
+ macro_build ((char *) NULL, counter, NULL, "dsll32", "d,w,<", reg,
+ freg, 0);
+ freg = reg;
+ }
+ }
else
{
expressionS mid16;
- macro_build ((char *) NULL, counter, NULL, "dsll", "d,w,<", reg,
- reg, 16);
+ if ((freg == 0) && (lo32.X_add_number == 0xffffffff))
+ {
+ macro_build ((char *) NULL, counter, &lo32, "lui", "t,u", reg,
+ (int) BFD_RELOC_HI16);
+ macro_build ((char *) NULL, counter, NULL, "dsrl32", "d,w,<", reg,
+ reg, 0);
+ return;
+ }
+
+ if (freg != 0)
+ {
+ macro_build ((char *) NULL, counter, NULL, "dsll", "d,w,<", reg,
+ freg, 16);
+ freg = reg;
+ }
mid16 = lo32;
mid16.X_add_number >>= 16;
macro_build ((char *) NULL, counter, &mid16, "ori", "t,r,i", reg,
- reg, (int) BFD_RELOC_LO16);
+ freg, (int) BFD_RELOC_LO16);
macro_build ((char *) NULL, counter, NULL, "dsll", "d,w,<", reg,
reg, 16);
+ freg = reg;
}
if ((lo32.X_add_number & 0xffff) != 0)
- macro_build ((char *) NULL, counter, &lo32, "ori", "t,r,i", reg, reg,
+ macro_build ((char *) NULL, counter, &lo32, "ori", "t,r,i", reg, freg,
(int) BFD_RELOC_LO16);
}
if (ep->X_op != O_constant
&& ep->X_op != O_symbol)
{
- as_bad ("expression too complex");
+ as_bad (_("expression too complex"));
ep->X_op = O_constant;
}
if (ep->X_op == O_constant)
{
- load_register (counter, reg, ep);
+ load_register (counter, reg, ep, 0);
return;
}
lui $reg,<sym> (BFD_RELOC_HI16_S)
addiu $reg,$reg,<sym> (BFD_RELOC_LO16)
If we have an addend, we always use the latter form. */
- if (ep->X_add_number != 0)
+ if ((valueT) ep->X_add_number >= MAX_GPREL_OFFSET
+ || nopic_need_relax (ep->X_add_symbol, 1))
p = NULL;
else
{
frag_grow (20);
macro_build ((char *) NULL, counter, ep,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, GP, (int) BFD_RELOC_MIPS_GPREL);
p = frag_var (rs_machine_dependent, 8, 0,
- RELAX_ENCODE (4, 8, 0, 4, 0, mips_warn_about_macros),
- ep->X_add_symbol, (long) 0, (char *) NULL);
+ RELAX_ENCODE (4, 8, 0, 4, 0,
+ mips_opts.warn_about_macros),
+ ep->X_add_symbol, (offsetT) 0, (char *) NULL);
}
macro_build_lui (p, counter, ep, reg);
if (p != NULL)
p += 4;
macro_build (p, counter, ep,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, reg, (int) BFD_RELOC_LO16);
}
- else if (mips_pic == SVR4_PIC)
+ else if (mips_pic == SVR4_PIC && ! mips_big_got)
{
expressionS ex;
ep->X_add_number = 0;
frag_grow (20);
macro_build ((char *) NULL, counter, ep,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", reg, (int) BFD_RELOC_MIPS_GOT16, GP);
macro_build ((char *) NULL, counter, (expressionS *) NULL, "nop", "");
p = frag_var (rs_machine_dependent, 4, 0,
- RELAX_ENCODE (0, 4, -8, 0, 0, mips_warn_about_macros),
- ep->X_add_symbol, (long) 0, (char *) NULL);
+ RELAX_ENCODE (0, 4, -8, 0, 0, mips_opts.warn_about_macros),
+ ep->X_add_symbol, (offsetT) 0, (char *) NULL);
+ macro_build (p, counter, ep,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
+ "t,r,j", reg, reg, (int) BFD_RELOC_LO16);
+ if (ex.X_add_number != 0)
+ {
+ if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ ex.X_op = O_constant;
+ macro_build ((char *) NULL, counter, &ex,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
+ "t,r,j", reg, reg, (int) BFD_RELOC_LO16);
+ }
+ }
+ else if (mips_pic == SVR4_PIC)
+ {
+ expressionS ex;
+ int off;
+
+ /* This is the large GOT case. If this is a reference to an
+ external symbol, we want
+ lui $reg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $reg,$reg,$gp
+ lw $reg,<sym>($reg) (BFD_RELOC_MIPS_GOT_LO16)
+ Otherwise, for a reference to a local symbol, we want
+ lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $reg,$reg,<sym> (BFD_RELOC_LO16)
+ If there is a constant, it must be added in after. */
+ ex.X_add_number = ep->X_add_number;
+ ep->X_add_number = 0;
+ if (reg_needs_delay (GP))
+ off = 4;
+ else
+ off = 0;
+ frag_grow (32);
+ macro_build ((char *) NULL, counter, ep, "lui", "t,u", reg,
+ (int) BFD_RELOC_MIPS_GOT_HI16);
+ macro_build ((char *) NULL, counter, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", reg, reg, GP);
+ macro_build ((char *) NULL, counter, ep,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
+ "t,o(b)", reg, (int) BFD_RELOC_MIPS_GOT_LO16, reg);
+ p = frag_var (rs_machine_dependent, 12 + off, 0,
+ RELAX_ENCODE (12, 12 + off, off, 8 + off, 0,
+ mips_opts.warn_about_macros),
+ ep->X_add_symbol, (offsetT) 0, (char *) NULL);
+ if (off > 0)
+ {
+ /* We need a nop before loading from $gp. This special
+ check is required because the lui which starts the main
+ instruction stream does not refer to $gp, and so will not
+ insert the nop which may be required. */
+ macro_build (p, counter, (expressionS *) NULL, "nop", "");
+ p += 4;
+ }
+ macro_build (p, counter, ep,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
+ "t,o(b)", reg, (int) BFD_RELOC_MIPS_GOT16, GP);
+ p += 4;
+ macro_build (p, counter, (expressionS *) NULL, "nop", "");
+ p += 4;
macro_build (p, counter, ep,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, reg, (int) BFD_RELOC_LO16);
if (ex.X_add_number != 0)
{
if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
- as_bad ("PIC code offset overflow (max 16 signed bits)");
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
ex.X_op = O_constant;
- macro_build (p, counter, &ex,
- mips_isa < 3 ? "addiu" : "daddiu",
+ macro_build ((char *) NULL, counter, &ex,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, reg, (int) BFD_RELOC_LO16);
}
}
addiu $reg,$gp,<sym> (BFD_RELOC_MIPS_GPREL)
*/
macro_build ((char *) NULL, counter, ep,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, GP, (int) BFD_RELOC_MIPS_GPREL);
}
else
int tempreg;
int mask;
int icnt = 0;
- int used_at;
+ int used_at = 0;
expressionS expr1;
const char *s;
const char *s2;
int likely = 0;
int dbl = 0;
int coproc = 0;
+ int lr = 0;
+ int imm = 0;
offsetT maxnum;
+ int off;
bfd_reloc_code_real_type r;
char *p;
int hold_mips_optimize;
+ assert (! mips_opts.mips16);
+
treg = (ip->insn_opcode >> 16) & 0x1f;
dreg = (ip->insn_opcode >> 11) & 0x1f;
sreg = breg = (ip->insn_opcode >> 21) & 0x1f;
sub v0,$zero,$a0
*/
- mips_emit_delays ();
- ++mips_noreorder;
+ mips_emit_delays (true);
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
expr1.X_add_number = 8;
dbl ? "dsub" : "sub",
"d,v,t", dreg, 0, sreg);
- --mips_noreorder;
+ --mips_opts.noreorder;
return;
case M_ADD_I:
s = "daddiu";
s2 = "daddu";
do_addi:
- if (imm_expr.X_add_number >= -0x8000 && imm_expr.X_add_number < 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
{
macro_build ((char *) NULL, &icnt, &imm_expr, s, "t,r,j", treg, sreg,
(int) BFD_RELOC_LO16);
return;
}
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, dbl);
macro_build ((char *) NULL, &icnt, NULL, s2, "d,v,t", treg, sreg, AT);
break;
s = "xori";
s2 = "xor";
do_bit:
- if (imm_expr.X_add_number >= 0 && imm_expr.X_add_number < 0x10000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= 0
+ && imm_expr.X_add_number < 0x10000)
{
if (mask != M_NOR_I)
macro_build ((char *) NULL, &icnt, &imm_expr, s, "t,r,i", treg,
return;
}
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, 0);
macro_build ((char *) NULL, &icnt, NULL, s2, "d,v,t", treg, sreg, AT);
break;
s = "bnel";
likely = 1;
beq_i:
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
macro_build ((char *) NULL, &icnt, &offset_expr, s, "s,t,p", sreg,
0);
return;
}
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, 0);
macro_build ((char *) NULL, &icnt, &offset_expr, s, "s,t,p", sreg, AT);
break;
case M_BGT_I:
/* check for > max integer */
maxnum = 0x7fffffff;
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa) && sizeof (maxnum) > 4)
{
maxnum <<= 16;
maxnum |= 0xffff;
maxnum <<= 16;
maxnum |= 0xffff;
}
- if (imm_expr.X_add_number >= maxnum
- && (mips_isa < 3 || sizeof (maxnum) > 4))
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= maxnum
+ && (! ISA_HAS_64BIT_REGS (mips_opts.isa) || sizeof (maxnum) > 4))
{
do_false:
/* result is always false */
if (! likely)
{
- as_warn ("Branch %s is always false (nop)", ip->insn_mo->name);
+ as_warn (_("Branch %s is always false (nop)"), ip->insn_mo->name);
macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
}
else
{
- as_warn ("Branch likely %s is always false", ip->insn_mo->name);
+ as_warn (_("Branch likely %s is always false"), ip->insn_mo->name);
macro_build ((char *) NULL, &icnt, &offset_expr, "bnel",
"s,t,p", 0, 0);
}
return;
}
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
imm_expr.X_add_number++;
/* FALLTHROUGH */
case M_BGE_I:
case M_BGEL_I:
if (mask == M_BGEL_I)
likely = 1;
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "bgezl" : "bgez",
"s,p", sreg);
return;
}
- if (imm_expr.X_add_number == 1)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "bgtzl" : "bgtz",
return;
}
maxnum = 0x7fffffff;
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa) && sizeof (maxnum) > 4)
{
maxnum <<= 16;
maxnum |= 0xffff;
maxnum |= 0xffff;
}
maxnum = - maxnum - 1;
- if (imm_expr.X_add_number <= maxnum
- && (mips_isa < 3 || sizeof (maxnum) > 4))
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number <= maxnum
+ && (! ISA_HAS_64BIT_REGS (mips_opts.isa) || sizeof (maxnum) > 4))
{
do_true:
/* result is always true */
- as_warn ("Branch %s is always true", ip->insn_mo->name);
+ as_warn (_("Branch %s is always true"), ip->insn_mo->name);
macro_build ((char *) NULL, &icnt, &offset_expr, "b", "p");
return;
}
case M_BGTUL_I:
likely = 1;
case M_BGTU_I:
- if (sreg == 0 || imm_expr.X_add_number == -1)
+ if (sreg == 0
+ || (! ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && imm_expr.X_op == O_constant
+ && imm_expr.X_add_number == 0xffffffff))
goto do_false;
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
imm_expr.X_add_number++;
/* FALLTHROUGH */
case M_BGEU_I:
case M_BGEUL_I:
if (mask == M_BGEUL_I)
likely = 1;
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
goto do_true;
- if (imm_expr.X_add_number == 1)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "bnel" : "bne",
likely = 1;
case M_BLE_I:
maxnum = 0x7fffffff;
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa) && sizeof (maxnum) > 4)
{
maxnum <<= 16;
maxnum |= 0xffff;
maxnum <<= 16;
maxnum |= 0xffff;
}
- if (imm_expr.X_add_number >= maxnum
- && (mips_isa < 3 || sizeof (maxnum) > 4))
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= maxnum
+ && (! ISA_HAS_64BIT_REGS (mips_opts.isa) || sizeof (maxnum) > 4))
goto do_true;
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
imm_expr.X_add_number++;
/* FALLTHROUGH */
case M_BLT_I:
case M_BLTL_I:
if (mask == M_BLTL_I)
likely = 1;
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "bltzl" : "bltz",
"s,p", sreg);
return;
}
- if (imm_expr.X_add_number == 1)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "blezl" : "blez",
case M_BLEUL_I:
likely = 1;
case M_BLEU_I:
- if (sreg == 0 || imm_expr.X_add_number == -1)
+ if (sreg == 0
+ || (! ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && imm_expr.X_op == O_constant
+ && imm_expr.X_add_number == 0xffffffff))
goto do_true;
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
imm_expr.X_add_number++;
/* FALLTHROUGH */
case M_BLTU_I:
case M_BLTUL_I:
if (mask == M_BLTUL_I)
likely = 1;
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
goto do_false;
- if (imm_expr.X_add_number == 1)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "beql" : "beq",
do_div3:
if (treg == 0)
{
- as_warn ("Divide by zero.");
+ as_warn (_("Divide by zero."));
if (mips_trap)
macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", 0, 0);
else
return;
}
- mips_emit_delays ();
- ++mips_noreorder;
+ mips_emit_delays (true);
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
- macro_build ((char *) NULL, &icnt, NULL,
- dbl ? "ddiv" : "div",
- "z,s,t", sreg, treg);
if (mips_trap)
- macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", treg, 0);
+ {
+ macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", treg, 0);
+ macro_build ((char *) NULL, &icnt, NULL,
+ dbl ? "ddiv" : "div",
+ "z,s,t", sreg, treg);
+ }
else
{
expr1.X_add_number = 8;
macro_build ((char *) NULL, &icnt, &expr1, "bne", "s,t,p", treg, 0);
- macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
+ macro_build ((char *) NULL, &icnt, NULL,
+ dbl ? "ddiv" : "div",
+ "z,s,t", sreg, treg);
macro_build ((char *) NULL, &icnt, NULL, "break", "c", 7);
}
expr1.X_add_number = -1;
(int) BFD_RELOC_HI16);
}
if (mips_trap)
- macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", sreg, AT);
+ {
+ macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", sreg, AT);
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ --mips_opts.noreorder;
+ }
else
{
expr1.X_add_number = 8;
macro_build ((char *) NULL, &icnt, &expr1, "bne", "s,t,p", sreg, AT);
macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
+
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ --mips_opts.noreorder;
+
macro_build ((char *) NULL, &icnt, NULL, "break", "c", 6);
}
- --mips_noreorder;
macro_build ((char *) NULL, &icnt, NULL, s, "d", dreg);
break;
s = "ddivu";
s2 = "mfhi";
do_divi:
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
- as_warn ("Divide by zero.");
+ as_warn (_("Divide by zero."));
if (mips_trap)
macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", 0, 0);
else
macro_build ((char *) NULL, &icnt, NULL, "break", "c", 7);
return;
}
- if (imm_expr.X_add_number == 1)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
{
if (strcmp (s2, "mflo") == 0)
macro_build ((char *) NULL, &icnt, NULL, "move", "d,s", dreg,
macro_build ((char *) NULL, &icnt, NULL, "move", "d,s", dreg, 0);
return;
}
- if (imm_expr.X_add_number == -1
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number == -1
&& s[strlen (s) - 1] != 'u')
{
if (strcmp (s2, "mflo") == 0)
return;
}
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, dbl);
macro_build ((char *) NULL, &icnt, NULL, s, "z,s,t", sreg, AT);
macro_build ((char *) NULL, &icnt, NULL, s2, "d", dreg);
break;
s = "ddivu";
s2 = "mfhi";
do_divu3:
- mips_emit_delays ();
- ++mips_noreorder;
+ mips_emit_delays (true);
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
- macro_build ((char *) NULL, &icnt, NULL, s, "z,s,t", sreg, treg);
if (mips_trap)
- macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", treg, 0);
+ {
+ macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", treg, 0);
+ macro_build ((char *) NULL, &icnt, NULL, s, "z,s,t", sreg, treg);
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ --mips_opts.noreorder;
+ }
else
{
expr1.X_add_number = 8;
macro_build ((char *) NULL, &icnt, &expr1, "bne", "s,t,p", treg, 0);
- macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
+ macro_build ((char *) NULL, &icnt, NULL, s, "z,s,t", sreg, treg);
+
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ --mips_opts.noreorder;
macro_build ((char *) NULL, &icnt, NULL, "break", "c", 7);
}
- --mips_noreorder;
macro_build ((char *) NULL, &icnt, NULL, s2, "d", dreg);
return;
+ case M_DLA_AB:
+ dbl = 1;
case M_LA_AB:
/* Load the address of a symbol into a register. If breg is not
zero, we then add a base register to it. */
/* When generating embedded PIC code, we permit expressions of
the form
la $4,foo-bar
- where bar is an address in the .text section. These are used
+ where bar is an address in the current section. These are used
when getting the addresses of functions. We don't permit
X_add_number to be non-zero, because if the symbol is
external the relaxing code needs to know that any addend is
purely the offset to X_op_symbol. */
if (mips_pic == EMBEDDED_PIC
&& offset_expr.X_op == O_subtract
- && now_seg == text_section
- && (offset_expr.X_op_symbol->sy_value.X_op == O_constant
- ? S_GET_SEGMENT (offset_expr.X_op_symbol) == text_section
- : (offset_expr.X_op_symbol->sy_value.X_op == O_symbol
- && (S_GET_SEGMENT (offset_expr.X_op_symbol
- ->sy_value.X_add_symbol)
- == text_section)))
+ && (symbol_constant_p (offset_expr.X_op_symbol)
+ ? S_GET_SEGMENT (offset_expr.X_op_symbol) == now_seg
+ : (symbol_equated_p (offset_expr.X_op_symbol)
+ && (S_GET_SEGMENT
+ (symbol_get_value_expression (offset_expr.X_op_symbol)
+ ->X_add_symbol)
+ == now_seg)))
&& breg == 0
- && offset_expr.X_add_number == 0)
+ && (offset_expr.X_add_number == 0
+ || OUTPUT_FLAVOR == bfd_target_elf_flavour))
{
macro_build ((char *) NULL, &icnt, &offset_expr, "lui", "t,u",
treg, (int) BFD_RELOC_PCREL_HI16_S);
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", treg, treg, (int) BFD_RELOC_PCREL_LO16);
return;
}
if (offset_expr.X_op != O_symbol
&& offset_expr.X_op != O_constant)
{
- as_bad ("expression too complex");
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
}
if (offset_expr.X_op == O_constant)
- load_register (&icnt, tempreg, &offset_expr);
+ load_register (&icnt, tempreg, &offset_expr, dbl);
else if (mips_pic == NO_PIC)
{
/* If this is a reference to an GP relative symbol, we want
addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
If we have a constant, we need two instructions anyhow,
so we may as well always use the latter form. */
- if (offset_expr.X_add_number != 0)
+ if ((valueT) offset_expr.X_add_number >= MAX_GPREL_OFFSET
+ || nopic_need_relax (offset_expr.X_add_symbol, 1))
p = NULL;
else
{
frag_grow (20);
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, GP, (int) BFD_RELOC_MIPS_GPREL);
p = frag_var (rs_machine_dependent, 8, 0,
RELAX_ENCODE (4, 8, 0, 4, 0,
- mips_warn_about_macros),
- offset_expr.X_add_symbol, (long) 0,
+ mips_opts.warn_about_macros),
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
}
macro_build_lui (p, &icnt, &offset_expr, tempreg);
if (p != NULL)
p += 4;
macro_build (p, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
}
- else if (mips_pic == SVR4_PIC)
+ else if (mips_pic == SVR4_PIC && ! mips_big_got)
{
+ int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT16;
+
/* If this is a reference to an external symbol, and there
is no constant, we want
lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ or if tempreg is PIC_CALL_REG
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_CALL16)
For a local symbol, we want
lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
nop
expr1.X_add_number = offset_expr.X_add_number;
offset_expr.X_add_number = 0;
frag_grow (32);
+ if (expr1.X_add_number == 0 && tempreg == PIC_CALL_REG)
+ lw_reloc_type = (int) BFD_RELOC_MIPS_CALL16;
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
- "t,o(b)", tempreg, (int) BFD_RELOC_MIPS_GOT16, GP);
+ dbl ? "ld" : "lw",
+ "t,o(b)", tempreg, lw_reloc_type, GP);
if (expr1.X_add_number == 0)
{
int off;
p = frag_var (rs_machine_dependent, 8 - off, 0,
RELAX_ENCODE (0, 8 - off, -4 - off, 4 - off, 0,
(breg == 0
- ? mips_warn_about_macros
+ ? mips_opts.warn_about_macros
: 0)),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
if (breg == 0)
{
p += 4;
}
macro_build (p, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
/* FIXME: If breg == 0, and the next instruction uses
$tempreg, then if this variant case is used an extra
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"nop", "");
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
(void) frag_var (rs_machine_dependent, 0, 0,
RELAX_ENCODE (0, 0, -12, -4, 0, 0),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
}
else
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"nop", "");
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", treg, AT, breg);
breg = 0;
tempreg = treg;
mips_optimize = hold_mips_optimize;
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", AT, AT, (int) BFD_RELOC_LO16);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, tempreg, AT);
(void) frag_var (rs_machine_dependent, 0, 0,
RELAX_ENCODE (0, 0, -16 + off1, -8, 0, 0),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
used_at = 1;
}
}
- else if (mips_pic == EMBEDDED_PIC)
+ else if (mips_pic == SVR4_PIC)
{
- /* We use
- addiu $tempreg,$gp,<sym> (BFD_RELOC_MIPS_GPREL)
- */
- macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
- "t,r,j", tempreg, GP, (int) BFD_RELOC_MIPS_GPREL);
- }
- else
- abort ();
-
- if (breg != 0)
- macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
- "d,v,t", treg, tempreg, breg);
-
- if (! used_at)
- return;
+ int gpdel;
+ int lui_reloc_type = (int) BFD_RELOC_MIPS_GOT_HI16;
+ int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT_LO16;
+
+ /* This is the large GOT case. If this is a reference to an
+ external symbol, and there is no constant, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ or if tempreg is PIC_CALL_REG
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_CALL_HI16)
+ addu $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_CALL_LO16)
+ For a local symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
- break;
+ If we have a small constant, and this is a reference to
+ an external symbol, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ nop
+ addiu $tempreg,$tempreg,<constant>
+ For a local symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $tempreg,$tempreg,<constant> (BFD_RELOC_LO16)
- case M_J_A:
- /* The j instruction may not be used in PIC code, since it
- requires an absolute address. We convert it to a b
- instruction. */
- if (mips_pic == NO_PIC)
- macro_build ((char *) NULL, &icnt, &offset_expr, "j", "a");
+ If we have a large constant, and this is a reference to
+ an external symbol, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ lui $at,<hiconstant>
+ addiu $at,$at,<loconstant>
+ addu $tempreg,$tempreg,$at
+ For a local symbol, we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ lui $at,<hiconstant>
+ addiu $at,$at,<loconstant> (BFD_RELOC_LO16)
+ addu $tempreg,$tempreg,$at
+ */
+ expr1.X_add_number = offset_expr.X_add_number;
+ offset_expr.X_add_number = 0;
+ frag_grow (52);
+ if (reg_needs_delay (GP))
+ gpdel = 4;
+ else
+ gpdel = 0;
+ if (expr1.X_add_number == 0 && tempreg == PIC_CALL_REG)
+ {
+ lui_reloc_type = (int) BFD_RELOC_MIPS_CALL_HI16;
+ lw_reloc_type = (int) BFD_RELOC_MIPS_CALL_LO16;
+ }
+ macro_build ((char *) NULL, &icnt, &offset_expr, "lui", "t,u",
+ tempreg, lui_reloc_type);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", tempreg, tempreg, GP);
+ macro_build ((char *) NULL, &icnt, &offset_expr,
+ dbl ? "ld" : "lw",
+ "t,o(b)", tempreg, lw_reloc_type, tempreg);
+ if (expr1.X_add_number == 0)
+ {
+ int off;
+
+ if (breg == 0)
+ off = 0;
+ else
+ {
+ /* We're going to put in an addu instruction using
+ tempreg, so we may as well insert the nop right
+ now. */
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "nop", "");
+ off = 4;
+ }
+
+ p = frag_var (rs_machine_dependent, 12 + gpdel, 0,
+ RELAX_ENCODE (12 + off, 12 + gpdel, gpdel,
+ 8 + gpdel, 0,
+ (breg == 0
+ ? mips_opts.warn_about_macros
+ : 0)),
+ offset_expr.X_add_symbol, (offsetT) 0,
+ (char *) NULL);
+ }
+ else if (expr1.X_add_number >= -0x8000
+ && expr1.X_add_number < 0x8000)
+ {
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "nop", "");
+ macro_build ((char *) NULL, &icnt, &expr1,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
+ "t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
+
+ p = frag_var (rs_machine_dependent, 12 + gpdel, 0,
+ RELAX_ENCODE (20, 12 + gpdel, gpdel, 8 + gpdel, 0,
+ (breg == 0
+ ? mips_opts.warn_about_macros
+ : 0)),
+ offset_expr.X_add_symbol, (offsetT) 0,
+ (char *) NULL);
+ }
+ else
+ {
+ int adj, dreg;
+
+ /* If we are going to add in a base register, and the
+ target register and the base register are the same,
+ then we are using AT as a temporary register. Since
+ we want to load the constant into AT, we add our
+ current AT (from the global offset table) and the
+ register into the register now, and pretend we were
+ not using a base register. */
+ if (breg != treg)
+ {
+ adj = 0;
+ dreg = tempreg;
+ }
+ else
+ {
+ assert (tempreg == AT);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "nop", "");
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", treg, AT, breg);
+ dreg = treg;
+ adj = 8;
+ }
+
+ /* Set mips_optimize around the lui instruction to avoid
+ inserting an unnecessary nop after the lw. */
+ hold_mips_optimize = mips_optimize;
+ mips_optimize = 2;
+ macro_build_lui ((char *) NULL, &icnt, &expr1, AT);
+ mips_optimize = hold_mips_optimize;
+
+ macro_build ((char *) NULL, &icnt, &expr1,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
+ "t,r,j", AT, AT, (int) BFD_RELOC_LO16);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", dreg, dreg, AT);
+
+ p = frag_var (rs_machine_dependent, 16 + gpdel + adj, 0,
+ RELAX_ENCODE (24 + adj, 16 + gpdel + adj, gpdel,
+ 8 + gpdel, 0,
+ (breg == 0
+ ? mips_opts.warn_about_macros
+ : 0)),
+ offset_expr.X_add_symbol, (offsetT) 0,
+ (char *) NULL);
+
+ used_at = 1;
+ }
+
+ if (gpdel > 0)
+ {
+ /* This is needed because this instruction uses $gp, but
+ the first instruction on the main stream does not. */
+ macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
+ p += 4;
+ }
+ macro_build (p, &icnt, &offset_expr,
+ dbl ? "ld" : "lw",
+ "t,o(b)", tempreg, (int) BFD_RELOC_MIPS_GOT16, GP);
+ p += 4;
+ if (expr1.X_add_number >= -0x8000
+ && expr1.X_add_number < 0x8000)
+ {
+ macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
+ p += 4;
+ macro_build (p, &icnt, &expr1,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
+ "t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
+ /* FIXME: If add_number is 0, and there was no base
+ register, the external symbol case ended with a load,
+ so if the symbol turns out to not be external, and
+ the next instruction uses tempreg, an unnecessary nop
+ will be inserted. */
+ }
+ else
+ {
+ if (breg == treg)
+ {
+ /* We must add in the base register now, as in the
+ external symbol case. */
+ assert (tempreg == AT);
+ macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
+ p += 4;
+ macro_build (p, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", treg, AT, breg);
+ p += 4;
+ tempreg = treg;
+ /* We set breg to 0 because we have arranged to add
+ it in in both cases. */
+ breg = 0;
+ }
+
+ macro_build_lui (p, &icnt, &expr1, AT);
+ p += 4;
+ macro_build (p, &icnt, &expr1,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
+ "t,r,j", AT, AT, (int) BFD_RELOC_LO16);
+ p += 4;
+ macro_build (p, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", tempreg, tempreg, AT);
+ p += 4;
+ }
+ }
+ else if (mips_pic == EMBEDDED_PIC)
+ {
+ /* We use
+ addiu $tempreg,$gp,<sym> (BFD_RELOC_MIPS_GPREL)
+ */
+ macro_build ((char *) NULL, &icnt, &offset_expr,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
+ "t,r,j", tempreg, GP, (int) BFD_RELOC_MIPS_GPREL);
+ }
+ else
+ abort ();
+
+ if (breg != 0)
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", treg, tempreg, breg);
+
+ if (! used_at)
+ return;
+
+ break;
+
+ case M_J_A:
+ /* The j instruction may not be used in PIC code, since it
+ requires an absolute address. We convert it to a b
+ instruction. */
+ if (mips_pic == NO_PIC)
+ macro_build ((char *) NULL, &icnt, &offset_expr, "j", "a");
else
macro_build ((char *) NULL, &icnt, &offset_expr, "b", "p");
return;
else if (mips_pic == SVR4_PIC)
{
if (sreg != PIC_CALL_REG)
- as_warn ("MIPS PIC call to register other than $25");
-
+ as_warn (_("MIPS PIC call to register other than $25"));
+
macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "jalr",
"d,s", dreg, sreg);
if (mips_cprestore_offset < 0)
- as_warn ("No .cprestore pseudo-op used in PIC code");
+ as_warn (_("No .cprestore pseudo-op used in PIC code"));
else
{
expr1.X_add_number = mips_cprestore_offset;
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", GP, (int) BFD_RELOC_LO16, mips_frame_reg);
}
}
macro_build ((char *) NULL, &icnt, &offset_expr, "jal", "a");
else if (mips_pic == SVR4_PIC)
{
- /* If this is a reference to an external symbol, we want
+ /* If this is a reference to an external symbol, and we are
+ using a small GOT, we want
lw $25,<sym>($gp) (BFD_RELOC_MIPS_CALL16)
nop
jalr $25
nop
lw $gp,cprestore($sp)
The cprestore value is set using the .cprestore
- pseudo-op. If the symbol is not external, we want
+ pseudo-op. If we are using a big GOT, we want
+ lui $25,<sym> (BFD_RELOC_MIPS_CALL_HI16)
+ addu $25,$25,$gp
+ lw $25,<sym>($25) (BFD_RELOC_MIPS_CALL_LO16)
+ nop
+ jalr $25
+ nop
+ lw $gp,cprestore($sp)
+ If the symbol is not external, we want
lw $25,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
nop
addiu $25,$25,<sym> (BFD_RELOC_LO16)
jalr $25
nop
- lw $gp,cprestore($sp)
- */
- frag_grow (20);
- macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
- "t,o(b)", PIC_CALL_REG,
- (int) BFD_RELOC_MIPS_CALL16, GP);
- macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "nop", "");
- p = frag_var (rs_machine_dependent, 4, 0,
- RELAX_ENCODE (0, 4, -8, 0, 0, 0),
- offset_expr.X_add_symbol, (long) 0, (char *) NULL);
+ lw $gp,cprestore($sp) */
+ frag_grow (40);
+ if (! mips_big_got)
+ {
+ macro_build ((char *) NULL, &icnt, &offset_expr,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
+ "t,o(b)", PIC_CALL_REG,
+ (int) BFD_RELOC_MIPS_CALL16, GP);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "nop", "");
+ p = frag_var (rs_machine_dependent, 4, 0,
+ RELAX_ENCODE (0, 4, -8, 0, 0, 0),
+ offset_expr.X_add_symbol, (offsetT) 0,
+ (char *) NULL);
+ }
+ else
+ {
+ int gpdel;
+
+ if (reg_needs_delay (GP))
+ gpdel = 4;
+ else
+ gpdel = 0;
+ macro_build ((char *) NULL, &icnt, &offset_expr, "lui", "t,u",
+ PIC_CALL_REG, (int) BFD_RELOC_MIPS_CALL_HI16);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", PIC_CALL_REG, PIC_CALL_REG, GP);
+ macro_build ((char *) NULL, &icnt, &offset_expr,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
+ "t,o(b)", PIC_CALL_REG,
+ (int) BFD_RELOC_MIPS_CALL_LO16, PIC_CALL_REG);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "nop", "");
+ p = frag_var (rs_machine_dependent, 12 + gpdel, 0,
+ RELAX_ENCODE (16, 12 + gpdel, gpdel, 8 + gpdel,
+ 0, 0),
+ offset_expr.X_add_symbol, (offsetT) 0,
+ (char *) NULL);
+ if (gpdel > 0)
+ {
+ macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
+ p += 4;
+ }
+ macro_build (p, &icnt, &offset_expr,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
+ "t,o(b)", PIC_CALL_REG,
+ (int) BFD_RELOC_MIPS_GOT16, GP);
+ p += 4;
+ macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
+ p += 4;
+ }
macro_build (p, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", PIC_CALL_REG, PIC_CALL_REG,
(int) BFD_RELOC_LO16);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"jalr", "s", PIC_CALL_REG);
if (mips_cprestore_offset < 0)
- as_warn ("No .cprestore pseudo-op used in PIC code");
+ as_warn (_("No .cprestore pseudo-op used in PIC code"));
else
{
- if (mips_noreorder)
+ if (mips_opts.noreorder)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"nop", "");
expr1.X_add_number = mips_cprestore_offset;
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", GP, (int) BFD_RELOC_LO16,
mips_frame_reg);
}
goto ld;
case M_LWC0_AB:
s = "lwc0";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LWC1_AB:
s = "lwc1";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LWC2_AB:
s = "lwc2";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LWC3_AB:
s = "lwc3";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LWL_AB:
s = "lwl";
+ lr = 1;
goto ld;
case M_LWR_AB:
s = "lwr";
+ lr = 1;
goto ld;
case M_LDC1_AB:
+ if (mips_cpu == CPU_R4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
s = "ldc1";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LDC2_AB:
s = "ldc2";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LDC3_AB:
s = "ldc3";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LDL_AB:
s = "ldl";
+ lr = 1;
goto ld;
case M_LDR_AB:
s = "ldr";
+ lr = 1;
goto ld;
case M_LL_AB:
s = "ll";
case M_LWU_AB:
s = "lwu";
ld:
- if (breg == treg || coproc)
+ if (breg == treg || coproc || lr)
{
tempreg = AT;
used_at = 1;
goto st;
case M_SWC0_AB:
s = "swc0";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SWC1_AB:
s = "swc1";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SWC2_AB:
s = "swc2";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SWC3_AB:
s = "swc3";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SWL_AB:
s = "scd";
goto st;
case M_SDC1_AB:
+ if (mips_cpu == CPU_R4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
s = "sdc1";
coproc = 1;
+ /* Itbl support may require additional care here. */
goto st;
case M_SDC2_AB:
s = "sdc2";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SDC3_AB:
s = "sdc3";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SDL_AB:
tempreg = AT;
used_at = 1;
ld_st:
+ /* Itbl support may require additional care here. */
if (mask == M_LWC1_AB
|| mask == M_SWC1_AB
|| mask == M_LDC1_AB
if (offset_expr.X_op != O_constant
&& offset_expr.X_op != O_symbol)
{
- as_bad ("expression too complex");
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
With a constant we always use the latter case. */
if (breg == 0)
{
- if (offset_expr.X_add_number != 0)
+ if ((valueT) offset_expr.X_add_number >= MAX_GPREL_OFFSET
+ || nopic_need_relax (offset_expr.X_add_symbol, 1))
p = NULL;
else
{
treg, (int) BFD_RELOC_MIPS_GPREL, GP);
p = frag_var (rs_machine_dependent, 8, 0,
RELAX_ENCODE (4, 8, 0, 4, 0,
- (mips_warn_about_macros
- || (used_at && mips_noat))),
- offset_expr.X_add_symbol, (long) 0,
+ (mips_opts.warn_about_macros
+ || (used_at
+ && mips_opts.noat))),
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
used_at = 0;
}
}
else
{
- if (offset_expr.X_add_number != 0)
+ if ((valueT) offset_expr.X_add_number >= MAX_GPREL_OFFSET
+ || nopic_need_relax (offset_expr.X_add_symbol, 1))
p = NULL;
else
{
frag_grow (28);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, breg, GP);
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
treg, (int) BFD_RELOC_MIPS_GPREL, tempreg);
p = frag_var (rs_machine_dependent, 12, 0,
RELAX_ENCODE (8, 12, 0, 8, 0, 0),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
}
macro_build_lui (p, &icnt, &offset_expr, tempreg);
if (p != NULL)
p += 4;
macro_build (p, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, tempreg, breg);
if (p != NULL)
p += 4;
(int) BFD_RELOC_LO16, tempreg);
}
}
- else if (mips_pic == SVR4_PIC)
+ else if (mips_pic == SVR4_PIC && ! mips_big_got)
{
/* If this is a reference to an external symbol, we want
lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
offset_expr.X_add_number = 0;
if (expr1.X_add_number < -0x8000
|| expr1.X_add_number >= 0x8000)
- as_bad ("PIC code offset overflow (max 16 signed bits)");
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
frag_grow (20);
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", tempreg, (int) BFD_RELOC_MIPS_GOT16, GP);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "nop", "");
- p = frag_var (rs_machine_dependent, 4, 0,
+ p = frag_var (rs_machine_dependent, 4, 0,
RELAX_ENCODE (0, 4, -8, 0, 0, 0),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
macro_build (p, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
+ "t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
+ if (breg != 0)
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", tempreg, tempreg, breg);
+ macro_build ((char *) NULL, &icnt, &expr1, s, fmt, treg,
+ (int) BFD_RELOC_LO16, tempreg);
+ }
+ else if (mips_pic == SVR4_PIC)
+ {
+ int gpdel;
+
+ /* If this is a reference to an external symbol, we want
+ lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $tempreg,$tempreg,$gp
+ lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16)
+ <op> $treg,0($tempreg)
+ Otherwise we want
+ lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16)
+ <op> $treg,0($tempreg)
+ If there is a base register, we add it to $tempreg before
+ the <op>. If there is a constant, we stick it in the
+ <op> instruction. We don't handle constants larger than
+ 16 bits, because we have no way to load the upper 16 bits
+ (actually, we could handle them for the subset of cases
+ in which we are not using $at). */
+ assert (offset_expr.X_op == O_symbol);
+ expr1.X_add_number = offset_expr.X_add_number;
+ offset_expr.X_add_number = 0;
+ if (expr1.X_add_number < -0x8000
+ || expr1.X_add_number >= 0x8000)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ if (reg_needs_delay (GP))
+ gpdel = 4;
+ else
+ gpdel = 0;
+ frag_grow (36);
+ macro_build ((char *) NULL, &icnt, &offset_expr, "lui", "t,u",
+ tempreg, (int) BFD_RELOC_MIPS_GOT_HI16);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", tempreg, tempreg, GP);
+ macro_build ((char *) NULL, &icnt, &offset_expr,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
+ "t,o(b)", tempreg, (int) BFD_RELOC_MIPS_GOT_LO16,
+ tempreg);
+ p = frag_var (rs_machine_dependent, 12 + gpdel, 0,
+ RELAX_ENCODE (12, 12 + gpdel, gpdel, 8 + gpdel, 0, 0),
+ offset_expr.X_add_symbol, (offsetT) 0, (char *) NULL);
+ if (gpdel > 0)
+ {
+ macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
+ p += 4;
+ }
+ macro_build (p, &icnt, &offset_expr,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
+ "t,o(b)", tempreg, (int) BFD_RELOC_MIPS_GOT16, GP);
+ p += 4;
+ macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
+ p += 4;
+ macro_build (p, &icnt, &offset_expr,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
if (breg != 0)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, tempreg, breg);
macro_build ((char *) NULL, &icnt, &expr1, s, fmt, treg,
(int) BFD_RELOC_LO16, tempreg);
else
{
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, breg, GP);
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
treg, (int) BFD_RELOC_MIPS_GPREL, tempreg);
case M_LI:
case M_LI_S:
- load_register (&icnt, treg, &imm_expr);
+ load_register (&icnt, treg, &imm_expr, 0);
+ return;
+
+ case M_DLI:
+ load_register (&icnt, treg, &imm_expr, 1);
return;
case M_LI_SS:
if (imm_expr.X_op == O_constant)
{
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, 0);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"mtc1", "t,G", AT, treg);
break;
}
case M_LI_D:
+ /* If we have a constant in IMM_EXPR, then in mips3 mode it is
+ the entire value, and in mips1 mode it is the high order 32
+ bits of the value and the low order 32 bits are either zero
+ or in offset_expr. */
+ if (imm_expr.X_op == O_constant || imm_expr.X_op == O_big)
+ {
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
+ load_register (&icnt, treg, &imm_expr, 1);
+ else
+ {
+ int hreg, lreg;
+
+ if (target_big_endian)
+ {
+ hreg = treg;
+ lreg = treg + 1;
+ }
+ else
+ {
+ hreg = treg + 1;
+ lreg = treg;
+ }
+
+ if (hreg <= 31)
+ load_register (&icnt, hreg, &imm_expr, 0);
+ if (lreg <= 31)
+ {
+ if (offset_expr.X_op == O_absent)
+ macro_build ((char *) NULL, &icnt, NULL, "move", "d,s",
+ lreg, 0);
+ else
+ {
+ assert (offset_expr.X_op == O_constant);
+ load_register (&icnt, lreg, &offset_expr, 0);
+ }
+ }
+ }
+ return;
+ }
+
/* We know that sym is in the .rdata section. First we get the
upper 16 bits of the address. */
if (mips_pic == NO_PIC)
else if (mips_pic == SVR4_PIC)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", AT, (int) BFD_RELOC_MIPS_GOT16, GP);
}
else if (mips_pic == EMBEDDED_PIC)
/* For embedded PIC we pick up the entire address off $gp in
a single instruction. */
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", AT, GP, (int) BFD_RELOC_MIPS_GPREL);
offset_expr.X_op = O_constant;
offset_expr.X_add_number = 0;
}
else
abort ();
-
+
/* Now we load the register(s). */
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
macro_build ((char *) NULL, &icnt, &offset_expr, "ld", "t,o(b)",
treg, (int) BFD_RELOC_LO16, AT);
else
break;
case M_LI_DD:
+ /* If we have a constant in IMM_EXPR, then in mips3 mode it is
+ the entire value, and in mips1 mode it is the high order 32
+ bits of the value and the low order 32 bits are either zero
+ or in offset_expr. */
+ if (imm_expr.X_op == O_constant || imm_expr.X_op == O_big)
+ {
+ load_register (&icnt, AT, &imm_expr, ISA_HAS_64BIT_REGS (mips_opts.isa));
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "dmtc1", "t,S", AT, treg);
+ else
+ {
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "mtc1", "t,G", AT, treg + 1);
+ if (offset_expr.X_op == O_absent)
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "mtc1", "t,G", 0, treg);
+ else
+ {
+ assert (offset_expr.X_op == O_constant);
+ load_register (&icnt, AT, &offset_expr, 0);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "mtc1", "t,G", AT, treg);
+ }
+ }
+ break;
+ }
+
assert (offset_expr.X_op == O_symbol
&& offset_expr.X_add_number == 0);
s = segment_name (S_GET_SEGMENT (offset_expr.X_add_symbol));
if (strcmp (s, ".lit8") == 0)
{
- if (mips_isa >= 2)
+ if (mips_opts.isa != ISA_MIPS1)
{
macro_build ((char *) NULL, &icnt, &offset_expr, "ldc1",
"T,o(b)", treg, (int) BFD_RELOC_MIPS_LITERAL, GP);
assert (strcmp (s, RDATA_SECTION_NAME) == 0);
if (mips_pic == SVR4_PIC)
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", AT, (int) BFD_RELOC_MIPS_GOT16, GP);
else
{
/* FIXME: This won't work for a 64 bit address. */
macro_build_lui ((char *) NULL, &icnt, &offset_expr, AT);
}
-
- if (mips_isa >= 2)
+
+ if (mips_opts.isa != ISA_MIPS1)
{
macro_build ((char *) NULL, &icnt, &offset_expr, "ldc1",
"T,o(b)", treg, (int) BFD_RELOC_LO16, AT);
}
case M_L_DOB:
+ if (mips_cpu == CPU_R4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
/* Even on a big endian machine $fn comes before $fn+1. We have
to adjust when loading from memory. */
r = BFD_RELOC_LO16;
dob:
- assert (mips_isa < 2);
+ assert (mips_opts.isa == ISA_MIPS1);
macro_build ((char *) NULL, &icnt, &offset_expr, "lwc1", "T,o(b)",
- byte_order == LITTLE_ENDIAN ? treg : treg + 1,
+ target_big_endian ? treg + 1 : treg,
(int) r, breg);
/* FIXME: A possible overflow which I don't know how to deal
with. */
offset_expr.X_add_number += 4;
macro_build ((char *) NULL, &icnt, &offset_expr, "lwc1", "T,o(b)",
- byte_order == LITTLE_ENDIAN ? treg + 1 : treg,
+ target_big_endian ? treg : treg + 1,
(int) r, breg);
/* To avoid confusion in tc_gen_reloc, we must ensure that this
* But, the resulting address is the same after relocation so why
* generate the extra instruction?
*/
+ if (mips_cpu == CPU_R4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
+ /* Itbl support may require additional care here. */
coproc = 1;
- if (mips_isa >= 2)
+ if (mips_opts.isa != ISA_MIPS1)
{
s = "ldc1";
goto ld;
goto ldd_std;
case M_S_DAB:
- if (mips_isa >= 2)
+ if (mips_cpu == CPU_R4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
+
+ if (mips_opts.isa != ISA_MIPS1)
{
s = "sdc1";
goto st;
s = "swc1";
fmt = "T,o(b)";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ldd_std;
case M_LD_AB:
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
{
s = "ld";
goto ld;
goto ldd_std;
case M_SD_AB:
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
{
s = "sd";
goto st;
if (offset_expr.X_op != O_symbol
&& offset_expr.X_op != O_constant)
{
- as_bad ("expression too complex");
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
/* Even on a big endian machine $fn comes before $fn+1. We have
to adjust when loading from memory. We set coproc if we must
load $fn+1 first. */
- if (byte_order == LITTLE_ENDIAN)
+ /* Itbl support may require additional care here. */
+ if (! target_big_endian)
coproc = 0;
if (mips_pic == NO_PIC
If there is a base register, we add it to $at after the
lui instruction. If there is a constant, we always use
the last case. */
- if (offset_expr.X_add_number != 0)
+ if ((valueT) offset_expr.X_add_number >= MAX_GPREL_OFFSET
+ || nopic_need_relax (offset_expr.X_add_symbol, 1))
{
p = NULL;
used_at = 1;
{
frag_grow (36);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, breg, GP);
tempreg = AT;
off = 4;
used_at = 1;
}
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
coproc ? treg + 1 : treg,
(int) BFD_RELOC_MIPS_GPREL, tempreg);
undesired nop. */
hold_mips_optimize = mips_optimize;
mips_optimize = 2;
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
coproc ? treg : treg + 1,
(int) BFD_RELOC_MIPS_GPREL, tempreg);
p = frag_var (rs_machine_dependent, 12 + off, 0,
RELAX_ENCODE (8 + off, 12 + off, 0, 4 + off, 1,
- used_at && mips_noat),
- offset_expr.X_add_symbol, (long) 0,
+ used_at && mips_opts.noat),
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
/* We just generated two relocs. When tc_gen_reloc
subtract it out, and then subtract another 4 to make
the first reloc come out right. The second reloc
will come out right because we are going to add 4 to
- offset_expr when we build its instruction below. */
- offset_expr.X_add_number -= 8;
- offset_expr.X_op = O_constant;
+ offset_expr when we build its instruction below.
+
+ If we have a symbol, then we don't want to include
+ the offset, because it will wind up being included
+ when we generate the reloc. */
+
+ if (offset_expr.X_op == O_constant)
+ offset_expr.X_add_number -= 8;
+ else
+ {
+ offset_expr.X_add_number = -4;
+ offset_expr.X_op = O_constant;
+ }
}
macro_build_lui (p, &icnt, &offset_expr, AT);
if (p != NULL)
if (breg != 0)
{
macro_build (p, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, breg, AT);
if (p != NULL)
p += 4;
}
+ /* Itbl support may require additional care here. */
macro_build (p, &icnt, &offset_expr, s, fmt,
coproc ? treg + 1 : treg,
(int) BFD_RELOC_LO16, AT);
p += 4;
/* FIXME: How do we handle overflow here? */
offset_expr.X_add_number += 4;
+ /* Itbl support may require additional care here. */
macro_build (p, &icnt, &offset_expr, s, fmt,
coproc ? treg : treg + 1,
(int) BFD_RELOC_LO16, AT);
- }
- else if (mips_pic == SVR4_PIC)
+ }
+ else if (mips_pic == SVR4_PIC && ! mips_big_got)
{
int off;
offset_expr.X_add_number = 0;
if (expr1.X_add_number < -0x8000
|| expr1.X_add_number >= 0x8000 - 4)
- as_bad ("PIC code offset overflow (max 16 signed bits)");
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
if (breg == 0)
off = 0;
else
off = 4;
frag_grow (24 + off);
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", AT, (int) BFD_RELOC_MIPS_GOT16, GP);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "nop", "");
if (breg != 0)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, breg, AT);
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &expr1, s, fmt,
coproc ? treg + 1 : treg,
(int) BFD_RELOC_LO16, AT);
nop. */
hold_mips_optimize = mips_optimize;
mips_optimize = 2;
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &expr1, s, fmt,
coproc ? treg : treg + 1,
(int) BFD_RELOC_LO16, AT);
(void) frag_var (rs_machine_dependent, 0, 0,
RELAX_ENCODE (0, 0, -16 - off, -8, 1, 0),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
}
+ else if (mips_pic == SVR4_PIC)
+ {
+ int gpdel, off;
+
+ /* If this is a reference to an external symbol, we want
+ lui $at,<sym> (BFD_RELOC_MIPS_GOT_HI16)
+ addu $at,$at,$gp
+ lw $at,<sym>($at) (BFD_RELOC_MIPS_GOT_LO16)
+ nop
+ <op> $treg,0($at)
+ <op> $treg+1,4($at)
+ Otherwise we want
+ lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16)
+ nop
+ <op> $treg,<sym>($at) (BFD_RELOC_LO16)
+ <op> $treg+1,<sym>+4($at) (BFD_RELOC_LO16)
+ If there is a base register we add it to $at before the
+ lwc1 instructions. If there is a constant we include it
+ in the lwc1 instructions. */
+ used_at = 1;
+ expr1.X_add_number = offset_expr.X_add_number;
+ offset_expr.X_add_number = 0;
+ if (expr1.X_add_number < -0x8000
+ || expr1.X_add_number >= 0x8000 - 4)
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
+ if (reg_needs_delay (GP))
+ gpdel = 4;
+ else
+ gpdel = 0;
+ if (breg == 0)
+ off = 0;
+ else
+ off = 4;
+ frag_grow (56);
+ macro_build ((char *) NULL, &icnt, &offset_expr, "lui", "t,u",
+ AT, (int) BFD_RELOC_MIPS_GOT_HI16);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", AT, AT, GP);
+ macro_build ((char *) NULL, &icnt, &offset_expr,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
+ "t,o(b)", AT, (int) BFD_RELOC_MIPS_GOT_LO16, AT);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "nop", "");
+ if (breg != 0)
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", AT, breg, AT);
+ /* Itbl support may require additional care here. */
+ macro_build ((char *) NULL, &icnt, &expr1, s, fmt,
+ coproc ? treg + 1 : treg,
+ (int) BFD_RELOC_LO16, AT);
+ expr1.X_add_number += 4;
+
+ /* Set mips_optimize to 2 to avoid inserting an undesired
+ nop. */
+ hold_mips_optimize = mips_optimize;
+ mips_optimize = 2;
+ /* Itbl support may require additional care here. */
+ macro_build ((char *) NULL, &icnt, &expr1, s, fmt,
+ coproc ? treg : treg + 1,
+ (int) BFD_RELOC_LO16, AT);
+ mips_optimize = hold_mips_optimize;
+ expr1.X_add_number -= 4;
+
+ p = frag_var (rs_machine_dependent, 16 + gpdel + off, 0,
+ RELAX_ENCODE (24 + off, 16 + gpdel + off, gpdel,
+ 8 + gpdel + off, 1, 0),
+ offset_expr.X_add_symbol, (offsetT) 0,
+ (char *) NULL);
+ if (gpdel > 0)
+ {
+ macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
+ p += 4;
+ }
+ macro_build (p, &icnt, &offset_expr,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
+ "t,o(b)", AT, (int) BFD_RELOC_MIPS_GOT16, GP);
+ p += 4;
+ macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
+ p += 4;
+ if (breg != 0)
+ {
+ macro_build (p, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", AT, breg, AT);
+ p += 4;
+ }
+ /* Itbl support may require additional care here. */
+ macro_build (p, &icnt, &expr1, s, fmt,
+ coproc ? treg + 1 : treg,
+ (int) BFD_RELOC_LO16, AT);
+ p += 4;
+ expr1.X_add_number += 4;
+
+ /* Set mips_optimize to 2 to avoid inserting an undesired
+ nop. */
+ hold_mips_optimize = mips_optimize;
+ mips_optimize = 2;
+ /* Itbl support may require additional care here. */
+ macro_build (p, &icnt, &expr1, s, fmt,
+ coproc ? treg : treg + 1,
+ (int) BFD_RELOC_LO16, AT);
+ mips_optimize = hold_mips_optimize;
+ }
else if (mips_pic == EMBEDDED_PIC)
{
/* If there is no base register, we use
else
{
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, breg, GP);
tempreg = AT;
used_at = 1;
}
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
coproc ? treg + 1 : treg,
(int) BFD_RELOC_MIPS_GPREL, tempreg);
offset_expr.X_add_number += 4;
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
coproc ? treg : treg + 1,
(int) BFD_RELOC_MIPS_GPREL, tempreg);
case M_SD_OB:
s = "sw";
sd_ob:
- assert (mips_isa < 3);
+ assert (bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa));
macro_build ((char *) NULL, &icnt, &offset_expr, s, "t,o(b)", treg,
(int) BFD_RELOC_LO16, breg);
offset_expr.X_add_number += 4;
macro_build ((char *) NULL, &icnt, &offset_expr, s, "t,o(b)", treg + 1,
(int) BFD_RELOC_LO16, breg);
return;
+
+ /* New code added to support COPZ instructions.
+ This code builds table entries out of the macros in mip_opcodes.
+ R4000 uses interlocks to handle coproc delays.
+ Other chips (like the R3000) require nops to be inserted for delays.
+
+ FIXME: Currently, we require that the user handle delays.
+ In order to fill delay slots for non-interlocked chips,
+ we must have a way to specify delays based on the coprocessor.
+ Eg. 4 cycles if load coproc reg from memory, 1 if in cache, etc.
+ What are the side-effects of the cop instruction?
+ What cache support might we have and what are its effects?
+ Both coprocessor & memory require delays. how long???
+ What registers are read/set/modified?
+
+ If an itbl is provided to interpret cop instructions,
+ this knowledge can be encoded in the itbl spec. */
+
+ case M_COP0:
+ s = "c0";
+ goto copz;
+ case M_COP1:
+ s = "c1";
+ goto copz;
+ case M_COP2:
+ s = "c2";
+ goto copz;
+ case M_COP3:
+ s = "c3";
+ copz:
+ /* For now we just do C (same as Cz). The parameter will be
+ stored in insn_opcode by mips_ip. */
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, s, "C",
+ ip->insn_opcode);
+ return;
+
#ifdef LOSING_COMPILER
default:
+ /* Try and see if this is a new itbl instruction.
+ This code builds table entries out of the macros in mip_opcodes.
+ FIXME: For now we just assemble the expression and pass it's
+ value along as a 32-bit immediate.
+ We may want to have the assembler assemble this value,
+ so that we gain the assembler's knowledge of delay slots,
+ symbols, etc.
+ Would it be more efficient to use mask (id) here? */
+ if (itbl_have_entries
+ && (immed_expr = itbl_assemble (ip->insn_mo->name, "")))
+ {
+ s = ip->insn_mo->name;
+ s2 = "cop3";
+ coproc = ITBL_DECODE_PNUM (immed_expr);;
+ macro_build ((char *) NULL, &icnt, &immed_expr, s, "C");
+ return;
+ }
macro2 (ip);
return;
}
- if (mips_noat)
- as_warn ("Macro used $at after \".set noat\"");
+ if (mips_opts.noat)
+ as_warn (_("Macro used $at after \".set noat\""));
}
-
+
static void
macro2 (ip)
struct mips_cl_insn *ip;
int likely = 0;
int dbl = 0;
int coproc = 0;
+ int lr = 0;
+ int imm = 0;
+ int off;
offsetT maxnum;
bfd_reloc_code_real_type r;
char *p;
-
+
treg = (ip->insn_opcode >> 16) & 0x1f;
dreg = (ip->insn_opcode >> 11) & 0x1f;
sreg = breg = (ip->insn_opcode >> 21) & 0x1f;
mask = ip->insn_mo->mask;
-
+
expr1.X_op = O_constant;
expr1.X_op_symbol = NULL;
expr1.X_add_symbol = NULL;
expr1.X_add_number = 1;
-
+
switch (mask)
{
#endif /* LOSING_COMPILER */
/* The MIPS assembler some times generates shifts and adds. I'm
not trying to be that fancy. GCC should do this for us
anyway. */
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, dbl);
macro_build ((char *) NULL, &icnt, NULL,
dbl ? "dmult" : "mult",
"s,t", sreg, AT);
macro_build ((char *) NULL, &icnt, NULL, "mflo", "d", dreg);
break;
+ case M_DMULO_I:
+ dbl = 1;
+ case M_MULO_I:
+ imm = 1;
+ goto do_mulo;
+
case M_DMULO:
dbl = 1;
case M_MULO:
- mips_emit_delays ();
- ++mips_noreorder;
+ do_mulo:
+ mips_emit_delays (true);
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
+ if (imm)
+ load_register (&icnt, AT, &imm_expr, dbl);
macro_build ((char *) NULL, &icnt, NULL,
dbl ? "dmult" : "mult",
- "s,t", sreg, treg);
+ "s,t", sreg, imm ? AT : treg);
macro_build ((char *) NULL, &icnt, NULL, "mflo", "d", dreg);
macro_build ((char *) NULL, &icnt, NULL,
dbl ? "dsra32" : "sra",
macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
macro_build ((char *) NULL, &icnt, NULL, "break", "c", 6);
}
- --mips_noreorder;
+ --mips_opts.noreorder;
macro_build ((char *) NULL, &icnt, NULL, "mflo", "d", dreg);
break;
+ case M_DMULOU_I:
+ dbl = 1;
+ case M_MULOU_I:
+ imm = 1;
+ goto do_mulou;
+
case M_DMULOU:
dbl = 1;
case M_MULOU:
- mips_emit_delays ();
- ++mips_noreorder;
+ do_mulou:
+ mips_emit_delays (true);
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
+ if (imm)
+ load_register (&icnt, AT, &imm_expr, dbl);
macro_build ((char *) NULL, &icnt, NULL,
dbl ? "dmultu" : "multu",
- "s,t", sreg, treg);
+ "s,t", sreg, imm ? AT : treg);
macro_build ((char *) NULL, &icnt, NULL, "mfhi", "d", AT);
macro_build ((char *) NULL, &icnt, NULL, "mflo", "d", dreg);
if (mips_trap)
macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
macro_build ((char *) NULL, &icnt, NULL, "break", "c", 6);
}
- --mips_noreorder;
+ --mips_opts.noreorder;
break;
case M_ROL:
break;
case M_ROL_I:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("rotate count too large"));
macro_build ((char *) NULL, &icnt, NULL, "sll", "d,w,<", AT, sreg,
- imm_expr.X_add_number & 0x1f);
+ (int) (imm_expr.X_add_number & 0x1f));
macro_build ((char *) NULL, &icnt, NULL, "srl", "d,w,<", dreg, sreg,
- (0 - imm_expr.X_add_number) & 0x1f);
+ (int) ((0 - imm_expr.X_add_number) & 0x1f));
macro_build ((char *) NULL, &icnt, NULL, "or", "d,v,t", dreg, dreg, AT);
break;
break;
case M_ROR_I:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("rotate count too large"));
macro_build ((char *) NULL, &icnt, NULL, "srl", "d,w,<", AT, sreg,
- imm_expr.X_add_number & 0x1f);
+ (int) (imm_expr.X_add_number & 0x1f));
macro_build ((char *) NULL, &icnt, NULL, "sll", "d,w,<", dreg, sreg,
- (0 - imm_expr.X_add_number) & 0x1f);
+ (int) ((0 - imm_expr.X_add_number) & 0x1f));
macro_build ((char *) NULL, &icnt, NULL, "or", "d,v,t", dreg, dreg, AT);
break;
case M_S_DOB:
- assert (mips_isa < 2);
+ if (mips_cpu == CPU_R4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
+ assert (mips_opts.isa == ISA_MIPS1);
/* Even on a big endian machine $fn comes before $fn+1. We have
to adjust when storing to memory. */
macro_build ((char *) NULL, &icnt, &offset_expr, "swc1", "T,o(b)",
- byte_order == LITTLE_ENDIAN ? treg : treg + 1,
+ target_big_endian ? treg + 1 : treg,
(int) BFD_RELOC_LO16, breg);
offset_expr.X_add_number += 4;
macro_build ((char *) NULL, &icnt, &offset_expr, "swc1", "T,o(b)",
- byte_order == LITTLE_ENDIAN ? treg + 1 : treg,
+ target_big_endian ? treg : treg + 1,
(int) BFD_RELOC_LO16, breg);
return;
return;
case M_SEQ_I:
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
macro_build ((char *) NULL, &icnt, &expr1, "sltiu", "t,r,j", dreg,
sreg, (int) BFD_RELOC_LO16);
}
if (sreg == 0)
{
- as_warn ("Instruction %s: result is always false",
+ as_warn (_("Instruction %s: result is always false"),
ip->insn_mo->name);
macro_build ((char *) NULL, &icnt, NULL, "move", "d,s", dreg, 0);
return;
}
- if (imm_expr.X_add_number >= 0 && imm_expr.X_add_number < 0x10000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= 0
+ && imm_expr.X_add_number < 0x10000)
{
macro_build ((char *) NULL, &icnt, &imm_expr, "xori", "t,r,i", dreg,
sreg, (int) BFD_RELOC_LO16);
used_at = 0;
}
- else if (imm_expr.X_add_number > -0x8000 && imm_expr.X_add_number < 0)
+ else if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number > -0x8000
+ && imm_expr.X_add_number < 0)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build ((char *) NULL, &icnt, &imm_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", dreg, sreg,
(int) BFD_RELOC_LO16);
used_at = 0;
}
else
{
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, 0);
macro_build ((char *) NULL, &icnt, NULL, "xor", "d,v,t", dreg,
sreg, AT);
used_at = 1;
case M_SGE_I: /* sreg >= I <==> not (sreg < I) */
case M_SGEU_I:
- if (imm_expr.X_add_number >= -0x8000 && imm_expr.X_add_number < 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
{
- macro_build ((char *) NULL, &icnt, &expr1,
+ macro_build ((char *) NULL, &icnt, &imm_expr,
mask == M_SGE_I ? "slti" : "sltiu",
"t,r,j", dreg, sreg, (int) BFD_RELOC_LO16);
used_at = 0;
}
else
{
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, 0);
macro_build ((char *) NULL, &icnt, NULL,
mask == M_SGE_I ? "slt" : "sltu",
"d,v,t", dreg, sreg, AT);
case M_SGTU_I:
s = "sltu";
sgti:
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, 0);
macro_build ((char *) NULL, &icnt, NULL, s, "d,v,t", dreg, AT, sreg);
break;
case M_SLEU_I:
s = "sltu";
slei:
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, 0);
macro_build ((char *) NULL, &icnt, NULL, s, "d,v,t", dreg, AT, sreg);
macro_build ((char *) NULL, &icnt, &expr1, "xori", "t,r,i", dreg, dreg,
(int) BFD_RELOC_LO16);
break;
case M_SLT_I:
- if (imm_expr.X_add_number >= -0x8000 && imm_expr.X_add_number < 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
{
macro_build ((char *) NULL, &icnt, &imm_expr, "slti", "t,r,j",
dreg, sreg, (int) BFD_RELOC_LO16);
return;
}
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, 0);
macro_build ((char *) NULL, &icnt, NULL, "slt", "d,v,t", dreg, sreg, AT);
break;
case M_SLTU_I:
- if (imm_expr.X_add_number >= -0x8000 && imm_expr.X_add_number < 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
{
macro_build ((char *) NULL, &icnt, &imm_expr, "sltiu", "t,r,j",
dreg, sreg, (int) BFD_RELOC_LO16);
return;
}
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, 0);
macro_build ((char *) NULL, &icnt, NULL, "sltu", "d,v,t", dreg, sreg,
AT);
break;
return;
case M_SNE_I:
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
macro_build ((char *) NULL, &icnt, NULL, "sltu", "d,v,t", dreg, 0,
sreg);
}
if (sreg == 0)
{
- as_warn ("Instruction %s: result is always true",
+ as_warn (_("Instruction %s: result is always true"),
ip->insn_mo->name);
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", dreg, 0, (int) BFD_RELOC_LO16);
return;
}
- if (imm_expr.X_add_number >= 0 && imm_expr.X_add_number < 0x10000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= 0
+ && imm_expr.X_add_number < 0x10000)
{
macro_build ((char *) NULL, &icnt, &imm_expr, "xori", "t,r,i",
dreg, sreg, (int) BFD_RELOC_LO16);
used_at = 0;
}
- else if (imm_expr.X_add_number > -0x8000 && imm_expr.X_add_number < 0)
+ else if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number > -0x8000
+ && imm_expr.X_add_number < 0)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build ((char *) NULL, &icnt, &imm_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", dreg, sreg, (int) BFD_RELOC_LO16);
used_at = 0;
}
else
{
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, 0);
macro_build ((char *) NULL, &icnt, NULL, "xor", "d,v,t", dreg,
sreg, AT);
used_at = 1;
case M_DSUB_I:
dbl = 1;
case M_SUB_I:
- if (imm_expr.X_add_number > -0x8000 && imm_expr.X_add_number <= 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number > -0x8000
+ && imm_expr.X_add_number <= 0x8000)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build ((char *) NULL, &icnt, &imm_expr,
"t,r,j", dreg, sreg, (int) BFD_RELOC_LO16);
return;
}
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, dbl);
macro_build ((char *) NULL, &icnt, NULL,
dbl ? "dsub" : "sub",
"d,v,t", dreg, sreg, AT);
case M_DSUBU_I:
dbl = 1;
case M_SUBU_I:
- if (imm_expr.X_add_number > -0x8000 && imm_expr.X_add_number <= 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number > -0x8000
+ && imm_expr.X_add_number <= 0x8000)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build ((char *) NULL, &icnt, &imm_expr,
"t,r,j", dreg, sreg, (int) BFD_RELOC_LO16);
return;
}
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, dbl);
macro_build ((char *) NULL, &icnt, NULL,
dbl ? "dsubu" : "subu",
"d,v,t", dreg, sreg, AT);
case M_TNE_I:
s = "tne";
trap:
- load_register (&icnt, AT, &imm_expr);
+ load_register (&icnt, AT, &imm_expr, 0);
macro_build ((char *) NULL, &icnt, NULL, s, "s,t", sreg, AT);
break;
- case M_TRUNCWD:
case M_TRUNCWS:
- assert (mips_isa < 2);
+ case M_TRUNCWD:
+ assert (mips_opts.isa == ISA_MIPS1);
sreg = (ip->insn_opcode >> 11) & 0x1f; /* floating reg */
dreg = (ip->insn_opcode >> 06) & 0x1f; /* floating reg */
* Is the double cfc1 instruction a bug in the mips assembler;
* or is there a reason for it?
*/
- mips_emit_delays ();
- ++mips_noreorder;
+ mips_emit_delays (true);
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
macro_build ((char *) NULL, &icnt, NULL, "cfc1", "t,G", treg, 31);
macro_build ((char *) NULL, &icnt, NULL, "cfc1", "t,G", treg, 31);
mask == M_TRUNCWD ? "cvt.w.d" : "cvt.w.s", "D,S", dreg, sreg);
macro_build ((char *) NULL, &icnt, NULL, "ctc1", "t,G", treg, 31);
macro_build ((char *) NULL, &icnt, NULL, "nop", "");
- --mips_noreorder;
+ --mips_opts.noreorder;
break;
case M_ULH:
s = "lbu";
ulh:
if (offset_expr.X_add_number >= 0x7fff)
- as_bad ("operand overflow");
+ as_bad (_("operand overflow"));
/* avoid load delay */
- if (byte_order == LITTLE_ENDIAN)
+ if (! target_big_endian)
offset_expr.X_add_number += 1;
macro_build ((char *) NULL, &icnt, &offset_expr, s, "t,o(b)", treg,
(int) BFD_RELOC_LO16, breg);
- if (byte_order == LITTLE_ENDIAN)
+ if (! target_big_endian)
offset_expr.X_add_number -= 1;
else
offset_expr.X_add_number += 1;
macro_build ((char *) NULL, &icnt, NULL, "or", "d,v,t", treg, treg, AT);
break;
+ case M_ULD:
+ s = "ldl";
+ s2 = "ldr";
+ off = 7;
+ goto ulw;
case M_ULW:
- if (offset_expr.X_add_number >= 0x7ffd)
- as_bad ("operand overflow");
- if (byte_order == LITTLE_ENDIAN)
- offset_expr.X_add_number += 3;
- macro_build ((char *) NULL, &icnt, &offset_expr, "lwl", "t,o(b)", treg,
+ s = "lwl";
+ s2 = "lwr";
+ off = 3;
+ ulw:
+ if (offset_expr.X_add_number >= 0x8000 - off)
+ as_bad (_("operand overflow"));
+ if (! target_big_endian)
+ offset_expr.X_add_number += off;
+ macro_build ((char *) NULL, &icnt, &offset_expr, s, "t,o(b)", treg,
(int) BFD_RELOC_LO16, breg);
- if (byte_order == LITTLE_ENDIAN)
- offset_expr.X_add_number -= 3;
+ if (! target_big_endian)
+ offset_expr.X_add_number -= off;
else
- offset_expr.X_add_number += 3;
- macro_build ((char *) NULL, &icnt, &offset_expr, "lwr", "t,o(b)", treg,
+ offset_expr.X_add_number += off;
+ macro_build ((char *) NULL, &icnt, &offset_expr, s2, "t,o(b)", treg,
(int) BFD_RELOC_LO16, breg);
return;
+ case M_ULD_A:
+ s = "ldl";
+ s2 = "ldr";
+ off = 7;
+ goto ulwa;
+ case M_ULW_A:
+ s = "lwl";
+ s2 = "lwr";
+ off = 3;
+ ulwa:
+ load_address (&icnt, AT, &offset_expr);
+ if (breg != 0)
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", AT, AT, breg);
+ if (! target_big_endian)
+ expr1.X_add_number = off;
+ else
+ expr1.X_add_number = 0;
+ macro_build ((char *) NULL, &icnt, &expr1, s, "t,o(b)", treg,
+ (int) BFD_RELOC_LO16, AT);
+ if (! target_big_endian)
+ expr1.X_add_number = 0;
+ else
+ expr1.X_add_number = off;
+ macro_build ((char *) NULL, &icnt, &expr1, s2, "t,o(b)", treg,
+ (int) BFD_RELOC_LO16, AT);
+ break;
+
case M_ULH_A:
case M_ULHU_A:
- case M_ULW_A:
load_address (&icnt, AT, &offset_expr);
- if (mask == M_ULW_A)
- {
- if (byte_order == LITTLE_ENDIAN)
- expr1.X_add_number = 3;
- else
- expr1.X_add_number = 0;
- macro_build ((char *) NULL, &icnt, &expr1, "lwl", "t,o(b)", treg,
- (int) BFD_RELOC_LO16, AT);
- if (byte_order == LITTLE_ENDIAN)
- expr1.X_add_number = 0;
- else
- expr1.X_add_number = 3;
- macro_build ((char *) NULL, &icnt, &expr1, "lwr", "t,o(b)", treg,
- (int) BFD_RELOC_LO16, AT);
- }
+ if (breg != 0)
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", AT, AT, breg);
+ if (target_big_endian)
+ expr1.X_add_number = 0;
+ macro_build ((char *) NULL, &icnt, &expr1,
+ mask == M_ULH_A ? "lb" : "lbu", "t,o(b)", treg,
+ (int) BFD_RELOC_LO16, AT);
+ if (target_big_endian)
+ expr1.X_add_number = 1;
else
- {
- if (byte_order == BIG_ENDIAN)
- expr1.X_add_number = 0;
- macro_build ((char *) NULL, &icnt, &expr1,
- mask == M_ULH_A ? "lb" : "lbu", "t,o(b)", treg,
- (int) BFD_RELOC_LO16, AT);
- if (byte_order == BIG_ENDIAN)
- expr1.X_add_number = 1;
- else
- expr1.X_add_number = 0;
- macro_build ((char *) NULL, &icnt, &expr1, "lbu", "t,o(b)", AT,
- (int) BFD_RELOC_LO16, AT);
- macro_build ((char *) NULL, &icnt, NULL, "sll", "d,w,<", treg,
- treg, 8);
- macro_build ((char *) NULL, &icnt, NULL, "or", "d,v,t", treg,
- treg, AT);
- }
+ expr1.X_add_number = 0;
+ macro_build ((char *) NULL, &icnt, &expr1, "lbu", "t,o(b)", AT,
+ (int) BFD_RELOC_LO16, AT);
+ macro_build ((char *) NULL, &icnt, NULL, "sll", "d,w,<", treg,
+ treg, 8);
+ macro_build ((char *) NULL, &icnt, NULL, "or", "d,v,t", treg,
+ treg, AT);
break;
case M_USH:
if (offset_expr.X_add_number >= 0x7fff)
- as_bad ("operand overflow");
- if (byte_order == BIG_ENDIAN)
+ as_bad (_("operand overflow"));
+ if (target_big_endian)
offset_expr.X_add_number += 1;
macro_build ((char *) NULL, &icnt, &offset_expr, "sb", "t,o(b)", treg,
(int) BFD_RELOC_LO16, breg);
macro_build ((char *) NULL, &icnt, NULL, "srl", "d,w,<", AT, treg, 8);
- if (byte_order == BIG_ENDIAN)
+ if (target_big_endian)
offset_expr.X_add_number -= 1;
else
offset_expr.X_add_number += 1;
(int) BFD_RELOC_LO16, breg);
break;
+ case M_USD:
+ s = "sdl";
+ s2 = "sdr";
+ off = 7;
+ goto usw;
case M_USW:
- if (offset_expr.X_add_number >= 0x7ffd)
- as_bad ("operand overflow");
- if (byte_order == LITTLE_ENDIAN)
- offset_expr.X_add_number += 3;
- macro_build ((char *) NULL, &icnt, &offset_expr, "swl", "t,o(b)", treg,
+ s = "swl";
+ s2 = "swr";
+ off = 3;
+ usw:
+ if (offset_expr.X_add_number >= 0x8000 - off)
+ as_bad (_("operand overflow"));
+ if (! target_big_endian)
+ offset_expr.X_add_number += off;
+ macro_build ((char *) NULL, &icnt, &offset_expr, s, "t,o(b)", treg,
(int) BFD_RELOC_LO16, breg);
- if (byte_order == LITTLE_ENDIAN)
- offset_expr.X_add_number -= 3;
+ if (! target_big_endian)
+ offset_expr.X_add_number -= off;
else
- offset_expr.X_add_number += 3;
- macro_build ((char *) NULL, &icnt, &offset_expr, "swr", "t,o(b)", treg,
+ offset_expr.X_add_number += off;
+ macro_build ((char *) NULL, &icnt, &offset_expr, s2, "t,o(b)", treg,
(int) BFD_RELOC_LO16, breg);
return;
- case M_USH_A:
+ case M_USD_A:
+ s = "sdl";
+ s2 = "sdr";
+ off = 7;
+ goto uswa;
case M_USW_A:
+ s = "swl";
+ s2 = "swr";
+ off = 3;
+ uswa:
load_address (&icnt, AT, &offset_expr);
- if (mask == M_USW_A)
- {
- if (byte_order == LITTLE_ENDIAN)
- expr1.X_add_number = 3;
- else
- expr1.X_add_number = 0;
- macro_build ((char *) NULL, &icnt, &expr1, "swl", "t,o(b)", treg,
- (int) BFD_RELOC_LO16, AT);
- if (byte_order == LITTLE_ENDIAN)
- expr1.X_add_number = 0;
- else
- expr1.X_add_number = 3;
- macro_build ((char *) NULL, &icnt, &expr1, "swr", "t,o(b)", treg,
- (int) BFD_RELOC_LO16, AT);
- }
+ if (breg != 0)
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", AT, AT, breg);
+ if (! target_big_endian)
+ expr1.X_add_number = off;
else
- {
- if (byte_order == LITTLE_ENDIAN)
- expr1.X_add_number = 0;
- macro_build ((char *) NULL, &icnt, &expr1, "sb", "t,o(b)", treg,
- (int) BFD_RELOC_LO16, AT);
- macro_build ((char *) NULL, &icnt, NULL, "srl", "d,w,<", treg,
- treg, 8);
- if (byte_order == LITTLE_ENDIAN)
- expr1.X_add_number = 1;
- else
- expr1.X_add_number = 0;
- macro_build ((char *) NULL, &icnt, &expr1, "sb", "t,o(b)", treg,
- (int) BFD_RELOC_LO16, AT);
- if (byte_order == LITTLE_ENDIAN)
- expr1.X_add_number = 0;
- else
- expr1.X_add_number = 1;
- macro_build ((char *) NULL, &icnt, &expr1, "lbu", "t,o(b)", AT,
- (int) BFD_RELOC_LO16, AT);
- macro_build ((char *) NULL, &icnt, NULL, "sll", "d,w,<", treg,
- treg, 8);
- macro_build ((char *) NULL, &icnt, NULL, "or", "d,v,t", treg,
- treg, AT);
- }
+ expr1.X_add_number = 0;
+ macro_build ((char *) NULL, &icnt, &expr1, s, "t,o(b)", treg,
+ (int) BFD_RELOC_LO16, AT);
+ if (! target_big_endian)
+ expr1.X_add_number = 0;
+ else
+ expr1.X_add_number = off;
+ macro_build ((char *) NULL, &icnt, &expr1, s2, "t,o(b)", treg,
+ (int) BFD_RELOC_LO16, AT);
+ break;
+
+ case M_USH_A:
+ load_address (&icnt, AT, &offset_expr);
+ if (breg != 0)
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
+ "d,v,t", AT, AT, breg);
+ if (! target_big_endian)
+ expr1.X_add_number = 0;
+ macro_build ((char *) NULL, &icnt, &expr1, "sb", "t,o(b)", treg,
+ (int) BFD_RELOC_LO16, AT);
+ macro_build ((char *) NULL, &icnt, NULL, "srl", "d,w,<", treg,
+ treg, 8);
+ if (! target_big_endian)
+ expr1.X_add_number = 1;
+ else
+ expr1.X_add_number = 0;
+ macro_build ((char *) NULL, &icnt, &expr1, "sb", "t,o(b)", treg,
+ (int) BFD_RELOC_LO16, AT);
+ if (! target_big_endian)
+ expr1.X_add_number = 0;
+ else
+ expr1.X_add_number = 1;
+ macro_build ((char *) NULL, &icnt, &expr1, "lbu", "t,o(b)", AT,
+ (int) BFD_RELOC_LO16, AT);
+ macro_build ((char *) NULL, &icnt, NULL, "sll", "d,w,<", treg,
+ treg, 8);
+ macro_build ((char *) NULL, &icnt, NULL, "or", "d,v,t", treg,
+ treg, AT);
break;
default:
- as_bad ("Macro %s not implemented yet", ip->insn_mo->name);
+ /* FIXME: Check if this is one of the itbl macros, since they
+ are added dynamically. */
+ as_bad (_("Macro %s not implemented yet"), ip->insn_mo->name);
break;
}
- if (mips_noat)
- as_warn ("Macro used $at after \".set noat\"");
+ if (mips_opts.noat)
+ as_warn (_("Macro used $at after \".set noat\""));
}
+/* Implement macros in mips16 mode. */
-/*
-This routine assembles an instruction into its binary format. As a side
-effect it sets one of the global variables imm_reloc or offset_reloc to the
-type of relocation to do if one of the operands is an address expression.
-*/
static void
-mips_ip (str, ip)
- char *str;
+mips16_macro (ip)
struct mips_cl_insn *ip;
{
- char *s;
- const char *args;
- char c;
- struct mips_opcode *insn;
- char *argsStart;
- unsigned int regno;
- unsigned int lastregno = 0;
- char *s_reset;
+ int mask;
+ int xreg, yreg, zreg, tmp;
+ int icnt;
+ expressionS expr1;
+ int dbl;
+ const char *s, *s2, *s3;
- insn_error = NULL;
+ mask = ip->insn_mo->mask;
- for (s = str; islower (*s) || (*s >= '0' && *s <= '3') || *s == '.'; ++s)
- continue;
- switch (*s)
+ xreg = (ip->insn_opcode >> MIPS16OP_SH_RX) & MIPS16OP_MASK_RX;
+ yreg = (ip->insn_opcode >> MIPS16OP_SH_RY) & MIPS16OP_MASK_RY;
+ zreg = (ip->insn_opcode >> MIPS16OP_SH_RZ) & MIPS16OP_MASK_RZ;
+
+ icnt = 0;
+
+ expr1.X_op = O_constant;
+ expr1.X_op_symbol = NULL;
+ expr1.X_add_symbol = NULL;
+ expr1.X_add_number = 1;
+
+ dbl = 0;
+
+ switch (mask)
{
- case '\0':
+ default:
+ internalError ();
+
+ case M_DDIV_3:
+ dbl = 1;
+ case M_DIV_3:
+ s = "mflo";
+ goto do_div3;
+ case M_DREM_3:
+ dbl = 1;
+ case M_REM_3:
+ s = "mfhi";
+ do_div3:
+ mips_emit_delays (true);
+ ++mips_opts.noreorder;
+ mips_any_noreorder = 1;
+ macro_build ((char *) NULL, &icnt, NULL,
+ dbl ? "ddiv" : "div",
+ "0,x,y", xreg, yreg);
+ expr1.X_add_number = 2;
+ macro_build ((char *) NULL, &icnt, &expr1, "bnez", "x,p", yreg);
+ macro_build ((char *) NULL, &icnt, NULL, "break", "6", 7);
+
+ /* FIXME: The normal code checks for of -1 / -0x80000000 here,
+ since that causes an overflow. We should do that as well,
+ but I don't see how to do the comparisons without a temporary
+ register. */
+ --mips_opts.noreorder;
+ macro_build ((char *) NULL, &icnt, NULL, s, "x", zreg);
break;
- case ' ':
- *s++ = '\0';
+ case M_DIVU_3:
+ s = "divu";
+ s2 = "mflo";
+ goto do_divu3;
+ case M_REMU_3:
+ s = "divu";
+ s2 = "mfhi";
+ goto do_divu3;
+ case M_DDIVU_3:
+ s = "ddivu";
+ s2 = "mflo";
+ goto do_divu3;
+ case M_DREMU_3:
+ s = "ddivu";
+ s2 = "mfhi";
+ do_divu3:
+ mips_emit_delays (true);
+ ++mips_opts.noreorder;
+ mips_any_noreorder = 1;
+ macro_build ((char *) NULL, &icnt, NULL, s, "0,x,y", xreg, yreg);
+ expr1.X_add_number = 2;
+ macro_build ((char *) NULL, &icnt, &expr1, "bnez", "x,p", yreg);
+ macro_build ((char *) NULL, &icnt, NULL, "break", "6", 7);
+ --mips_opts.noreorder;
+ macro_build ((char *) NULL, &icnt, NULL, s2, "x", zreg);
break;
- default:
- as_fatal ("Unknown opcode: `%s'", str);
- }
- if ((insn = (struct mips_opcode *) hash_find (op_hash, str)) == NULL)
- {
- as_warn ("`%s' not in hash table.", str);
- insn_error = "ERROR: Unrecognized opcode";
+ case M_DMUL:
+ dbl = 1;
+ case M_MUL:
+ macro_build ((char *) NULL, &icnt, NULL,
+ dbl ? "dmultu" : "multu",
+ "x,y", xreg, yreg);
+ macro_build ((char *) NULL, &icnt, NULL, "mflo", "x", zreg);
return;
- }
- argsStart = s;
- for (;;)
- {
- int insn_isa;
- assert (strcmp (insn->name, str) == 0);
+ case M_DSUBU_I:
+ dbl = 1;
+ goto do_subu;
+ case M_SUBU_I:
+ do_subu:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
+ imm_expr.X_add_number = -imm_expr.X_add_number;
+ macro_build ((char *) NULL, &icnt, &imm_expr,
+ dbl ? "daddiu" : "addiu",
+ "y,x,4", yreg, xreg);
+ break;
- if (insn->pinfo == INSN_MACRO)
- insn_isa = insn->match;
- else if (insn->pinfo & INSN_ISA2)
- insn_isa = 2;
- else if (insn->pinfo & INSN_ISA3)
- insn_isa = 3;
- else
- insn_isa = 1;
+ case M_SUBU_I_2:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
+ imm_expr.X_add_number = -imm_expr.X_add_number;
+ macro_build ((char *) NULL, &icnt, &imm_expr, "addiu",
+ "x,k", xreg);
+ break;
- if (insn_isa > mips_isa)
- {
- if (insn + 1 < &mips_opcodes[NUMOPCODES]
- && strcmp (insn->name, insn[1].name) == 0)
- {
- ++insn;
- continue;
- }
- as_warn ("Instruction not supported on this processor");
+ case M_DSUBU_I_2:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
+ imm_expr.X_add_number = -imm_expr.X_add_number;
+ macro_build ((char *) NULL, &icnt, &imm_expr, "daddiu",
+ "y,j", yreg);
+ break;
+
+ case M_BEQ:
+ s = "cmp";
+ s2 = "bteqz";
+ goto do_branch;
+ case M_BNE:
+ s = "cmp";
+ s2 = "btnez";
+ goto do_branch;
+ case M_BLT:
+ s = "slt";
+ s2 = "btnez";
+ goto do_branch;
+ case M_BLTU:
+ s = "sltu";
+ s2 = "btnez";
+ goto do_branch;
+ case M_BLE:
+ s = "slt";
+ s2 = "bteqz";
+ goto do_reverse_branch;
+ case M_BLEU:
+ s = "sltu";
+ s2 = "bteqz";
+ goto do_reverse_branch;
+ case M_BGE:
+ s = "slt";
+ s2 = "bteqz";
+ goto do_branch;
+ case M_BGEU:
+ s = "sltu";
+ s2 = "bteqz";
+ goto do_branch;
+ case M_BGT:
+ s = "slt";
+ s2 = "btnez";
+ goto do_reverse_branch;
+ case M_BGTU:
+ s = "sltu";
+ s2 = "btnez";
+
+ do_reverse_branch:
+ tmp = xreg;
+ xreg = yreg;
+ yreg = tmp;
+
+ do_branch:
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, s, "x,y",
+ xreg, yreg);
+ macro_build ((char *) NULL, &icnt, &offset_expr, s2, "p");
+ break;
+
+ case M_BEQ_I:
+ s = "cmpi";
+ s2 = "bteqz";
+ s3 = "x,U";
+ goto do_branch_i;
+ case M_BNE_I:
+ s = "cmpi";
+ s2 = "btnez";
+ s3 = "x,U";
+ goto do_branch_i;
+ case M_BLT_I:
+ s = "slti";
+ s2 = "btnez";
+ s3 = "x,8";
+ goto do_branch_i;
+ case M_BLTU_I:
+ s = "sltiu";
+ s2 = "btnez";
+ s3 = "x,8";
+ goto do_branch_i;
+ case M_BLE_I:
+ s = "slti";
+ s2 = "btnez";
+ s3 = "x,8";
+ goto do_addone_branch_i;
+ case M_BLEU_I:
+ s = "sltiu";
+ s2 = "btnez";
+ s3 = "x,8";
+ goto do_addone_branch_i;
+ case M_BGE_I:
+ s = "slti";
+ s2 = "bteqz";
+ s3 = "x,8";
+ goto do_branch_i;
+ case M_BGEU_I:
+ s = "sltiu";
+ s2 = "bteqz";
+ s3 = "x,8";
+ goto do_branch_i;
+ case M_BGT_I:
+ s = "slti";
+ s2 = "bteqz";
+ s3 = "x,8";
+ goto do_addone_branch_i;
+ case M_BGTU_I:
+ s = "sltiu";
+ s2 = "bteqz";
+ s3 = "x,8";
+
+ do_addone_branch_i:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
+ ++imm_expr.X_add_number;
+
+ do_branch_i:
+ macro_build ((char *) NULL, &icnt, &imm_expr, s, s3, xreg);
+ macro_build ((char *) NULL, &icnt, &offset_expr, s2, "p");
+ break;
+
+ case M_ABS:
+ expr1.X_add_number = 0;
+ macro_build ((char *) NULL, &icnt, &expr1, "slti", "x,8", yreg);
+ if (xreg != yreg)
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "move", "y,X", xreg, yreg);
+ expr1.X_add_number = 2;
+ macro_build ((char *) NULL, &icnt, &expr1, "bteqz", "p");
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "neg", "x,w", xreg, xreg);
+ }
+}
+
+/* For consistency checking, verify that all bits are specified either
+ by the match/mask part of the instruction definition, or by the
+ operand list. */
+static int
+validate_mips_insn (opc)
+ const struct mips_opcode *opc;
+{
+ const char *p = opc->args;
+ char c;
+ unsigned long used_bits = opc->mask;
+
+ if ((used_bits & opc->match) != opc->match)
+ {
+ as_bad (_("internal: bad mips opcode (mask error): %s %s"),
+ opc->name, opc->args);
+ return 0;
+ }
+#define USE_BITS(mask,shift) (used_bits |= ((mask) << (shift)))
+ while (*p)
+ switch (c = *p++)
+ {
+ case ',': break;
+ case '(': break;
+ case ')': break;
+ case '<': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
+ case '>': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
+ case 'A': break;
+ case 'B': USE_BITS (OP_MASK_CODE20, OP_SH_CODE20); break;
+ case 'C': USE_BITS (OP_MASK_COPZ, OP_SH_COPZ); break;
+ case 'D': USE_BITS (OP_MASK_FD, OP_SH_FD); break;
+ case 'E': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
+ case 'F': break;
+ case 'G': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
+ case 'H': USE_BITS (OP_MASK_SEL, OP_SH_SEL); break;
+ case 'I': break;
+ case 'J': USE_BITS (OP_MASK_CODE19, OP_SH_CODE19); break;
+ case 'L': break;
+ case 'M': USE_BITS (OP_MASK_CCC, OP_SH_CCC); break;
+ case 'N': USE_BITS (OP_MASK_BCC, OP_SH_BCC); break;
+ case 'R': USE_BITS (OP_MASK_FR, OP_SH_FR); break;
+ case 'S': USE_BITS (OP_MASK_FS, OP_SH_FS); break;
+ case 'T': USE_BITS (OP_MASK_FT, OP_SH_FT); break;
+ case 'V': USE_BITS (OP_MASK_FS, OP_SH_FS); break;
+ case 'W': USE_BITS (OP_MASK_FT, OP_SH_FT); break;
+ case 'a': USE_BITS (OP_MASK_TARGET, OP_SH_TARGET); break;
+ case 'b': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
+ case 'c': USE_BITS (OP_MASK_CODE, OP_SH_CODE); break;
+ case 'd': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
+ case 'f': break;
+ case 'h': USE_BITS (OP_MASK_PREFX, OP_SH_PREFX); break;
+ case 'i': USE_BITS (OP_MASK_IMMEDIATE, OP_SH_IMMEDIATE); break;
+ case 'j': USE_BITS (OP_MASK_DELTA, OP_SH_DELTA); break;
+ case 'k': USE_BITS (OP_MASK_CACHE, OP_SH_CACHE); break;
+ case 'l': break;
+ case 'o': USE_BITS (OP_MASK_DELTA, OP_SH_DELTA); break;
+ case 'p': USE_BITS (OP_MASK_DELTA, OP_SH_DELTA); break;
+ case 'q': USE_BITS (OP_MASK_CODE2, OP_SH_CODE2); break;
+ case 'r': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
+ case 's': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
+ case 't': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
+ case 'u': USE_BITS (OP_MASK_IMMEDIATE, OP_SH_IMMEDIATE); break;
+ case 'v': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
+ case 'w': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
+ case 'x': break;
+ case 'z': break;
+ case 'P': USE_BITS (OP_MASK_PERFREG, OP_SH_PERFREG); break;
+ case 'U': USE_BITS (OP_MASK_RD, OP_SH_RD);
+ USE_BITS (OP_MASK_RT, OP_SH_RT); break;
+ default:
+ as_bad (_("internal: bad mips opcode (unknown operand type `%c'): %s %s"),
+ c, opc->name, opc->args);
+ return 0;
+ }
+#undef USE_BITS
+ if (used_bits != 0xffffffff)
+ {
+ as_bad (_("internal: bad mips opcode (bits 0x%lx undefined): %s %s"),
+ ~used_bits & 0xffffffff, opc->name, opc->args);
+ return 0;
+ }
+ return 1;
+}
+
+/* This routine assembles an instruction into its binary format. As a
+ side effect, it sets one of the global variables imm_reloc or
+ offset_reloc to the type of relocation to do if one of the operands
+ is an address expression. */
+
+static void
+mips_ip (str, ip)
+ char *str;
+ struct mips_cl_insn *ip;
+{
+ char *s;
+ const char *args;
+ char c = 0;
+ struct mips_opcode *insn;
+ char *argsStart;
+ unsigned int regno;
+ unsigned int lastregno = 0;
+ char *s_reset;
+ char save_c = 0;
+ int full_opcode_match = 1;
+
+ insn_error = NULL;
+
+ /* If the instruction contains a '.', we first try to match an instruction
+ including the '.'. Then we try again without the '.'. */
+ insn = NULL;
+ for (s = str; *s != '\0' && !isspace ((unsigned char) *s); ++s)
+ continue;
+
+ /* If we stopped on whitespace, then replace the whitespace with null for
+ the call to hash_find. Save the character we replaced just in case we
+ have to re-parse the instruction. */
+ if (isspace ((unsigned char) *s))
+ {
+ save_c = *s;
+ *s++ = '\0';
+ }
+
+ insn = (struct mips_opcode *) hash_find (op_hash, str);
+
+ /* If we didn't find the instruction in the opcode table, try again, but
+ this time with just the instruction up to, but not including the
+ first '.'. */
+ if (insn == NULL)
+ {
+ /* Restore the character we overwrite above (if any). */
+ if (save_c)
+ *(--s) = save_c;
+
+ /* Scan up to the first '.' or whitespace. */
+ for (s = str; *s != '\0' && *s != '.' && !isspace ((unsigned char) *s); ++s)
+ continue;
+
+ /* If we did not find a '.', then we can quit now. */
+ if (*s != '.')
+ {
+ insn_error = "unrecognized opcode";
+ return;
+ }
+
+ /* Lookup the instruction in the hash table. */
+ *s++ = '\0';
+ if ((insn = (struct mips_opcode *) hash_find (op_hash, str)) == NULL)
+ {
+ insn_error = "unrecognized opcode";
+ return;
+ }
+
+ full_opcode_match = 0;
+ }
+
+ argsStart = s;
+ for (;;)
+ {
+ boolean ok;
+
+ assert (strcmp (insn->name, str) == 0);
+
+ if (OPCODE_IS_MEMBER (insn, mips_opts.isa, mips_cpu, mips_gp32))
+ ok = true;
+ else
+ ok = false;
+
+ if (insn->pinfo != INSN_MACRO)
+ {
+ if (mips_cpu == CPU_R4650 && (insn->pinfo & FP_D) != 0)
+ ok = false;
+ }
+
+ if (! ok)
+ {
+ if (insn + 1 < &mips_opcodes[NUMOPCODES]
+ && strcmp (insn->name, insn[1].name) == 0)
+ {
+ ++insn;
+ continue;
+ }
+ else
+ {
+ static char buf[100];
+ sprintf (buf,
+ _("opcode not supported on this processor: %s (%s)"),
+ mips_cpu_to_str (mips_cpu),
+ mips_isa_to_str (mips_opts.isa));
+
+ insn_error = buf;
+ return;
+ }
}
ip->insn_mo = insn;
break;
case '(':
- /* handle optional base register.
+ /* Handle optional base register.
Either the base register is omitted or
- we must have a left paren. */
- /* this is dependent on the next operand specifier
- is a 'b' for base register */
- assert (args[1] == 'b');
+ we must have a left paren. */
+ /* This is dependent on the next operand specifier
+ is a base register specification. */
+ assert (args[1] == 'b' || args[1] == '5'
+ || args[1] == '-' || args[1] == '4');
if (*s == '\0')
return;
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 31)
{
- as_warn ("Improper shift amount (%ld)",
+ as_warn (_("Improper shift amount (%ld)"),
(long) imm_expr.X_add_number);
imm_expr.X_add_number = imm_expr.X_add_number & 0x1f;
}
continue;
case 'k': /* cache code */
+ case 'h': /* prefx code */
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 31)
{
- as_warn ("Invalid cahce opcode (%lu)",
+ as_warn (_("Invalid value for `%s' (%lu)"),
+ ip->insn_mo->name,
(unsigned long) imm_expr.X_add_number);
imm_expr.X_add_number &= 0x1f;
}
- ip->insn_opcode |= imm_expr.X_add_number << OP_SH_CACHE;
+ if (*args == 'k')
+ ip->insn_opcode |= imm_expr.X_add_number << OP_SH_CACHE;
+ else
+ ip->insn_opcode |= imm_expr.X_add_number << OP_SH_PREFX;
imm_expr.X_op = O_absent;
s = expr_end;
continue;
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned) imm_expr.X_add_number > 1023)
- as_warn ("Illegal break code (%ld)",
- (long) imm_expr.X_add_number);
+ {
+ as_warn (_("Illegal break code (%ld)"),
+ (long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= 0x3ff;
+ }
ip->insn_opcode |= imm_expr.X_add_number << 16;
imm_expr.X_op = O_absent;
s = expr_end;
continue;
- case 'B': /* syscall code */
+ case 'q': /* lower break code */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned) imm_expr.X_add_number > 1023)
+ {
+ as_warn (_("Illegal lower break code (%ld)"),
+ (long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= 0x3ff;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number << 6;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case 'B': /* 20-bit syscall/break code. */
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned) imm_expr.X_add_number > 0xfffff)
- as_warn ("Illegal syscall code (%ld)",
+ as_warn (_("Illegal 20-bit code (%ld)"),
(long) imm_expr.X_add_number);
ip->insn_opcode |= imm_expr.X_add_number << 6;
imm_expr.X_op = O_absent;
continue;
case 'C': /* Coprocessor code */
- my_getExpression (&imm_expr, s);
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number >= (1<<25))
+ {
+ as_warn (_("Coproccesor code > 25 bits (%ld)"),
+ (long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= ((1<<25) - 1);
+ }
+ ip->insn_opcode |= imm_expr.X_add_number;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case 'J': /* 19-bit wait code. */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned) imm_expr.X_add_number > 0x7ffff)
+ as_warn (_("Illegal 19-bit code (%ld)"),
+ (long) imm_expr.X_add_number);
+ ip->insn_opcode |= imm_expr.X_add_number << 6;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case 'P': /* Performance register */
+ my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
- if ((unsigned long) imm_expr.X_add_number >= (1<<25))
+ if (imm_expr.X_add_number != 0 && imm_expr.X_add_number != 1)
{
- as_warn ("Coproccesor code > 25 bits (%ld)",
+ as_warn (_("Invalidate performance regster (%ld)"),
(long) imm_expr.X_add_number);
- imm_expr.X_add_number &= ((1<<25) - 1);
+ imm_expr.X_add_number &= 1;
}
- ip->insn_opcode |= imm_expr.X_add_number;
- imm_expr.X_op = O_absent;
- s = expr_end;
- continue;
+ ip->insn_opcode |= (imm_expr.X_add_number << 1);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
case 'b': /* base register */
case 'd': /* destination register */
case 'G': /* coprocessor destination register */
case 'x': /* ignore register name */
case 'z': /* must be zero register */
+ case 'U': /* destination register (clo/clz). */
s_reset = s;
if (s[0] == '$')
{
- if (isdigit (s[1]))
+
+ if (isdigit ((unsigned char) s[1]))
{
++s;
regno = 0;
regno += *s - '0';
++s;
}
- while (isdigit (*s));
+ while (isdigit ((unsigned char) *s));
if (regno > 31)
- as_bad ("Invalid register number (%d)", regno);
+ as_bad (_("Invalid register number (%d)"), regno);
}
else if (*args == 'E' || *args == 'G')
goto notreg;
s += 3;
regno = AT;
}
+ else if (s[1] == 'k' && s[2] == 't' && s[3] == '0')
+ {
+ s += 4;
+ regno = KT0;
+ }
+ else if (s[1] == 'k' && s[2] == 't' && s[3] == '1')
+ {
+ s += 4;
+ regno = KT1;
+ }
+ else if (itbl_have_entries)
+ {
+ char *p, *n;
+ unsigned long r;
+
+ p = s + 1; /* advance past '$' */
+ n = itbl_get_field (&p); /* n is name */
+
+ /* See if this is a register defined in an
+ itbl entry. */
+ if (itbl_get_reg_val (n, &r))
+ {
+ /* Get_field advances to the start of
+ the next field, so we need to back
+ rack to the end of the last field. */
+ if (p)
+ s = p - 1;
+ else
+ s = strchr (s, '\0');
+ regno = r;
+ }
+ else
+ goto notreg;
+ }
else
goto notreg;
}
- if (regno == AT && ! mips_noat)
- as_warn ("Used $at without \".set noat\"");
+ if (regno == AT
+ && ! mips_opts.noat
+ && *args != 'E'
+ && *args != 'G')
+ as_warn (_("Used $at without \".set noat\""));
c = *args;
if (*s == ' ')
s++;
/* 'z' only matches $0. */
if (c == 'z' && regno != 0)
break;
+
+ /* Now that we have assembled one operand, we use the args string
+ * to figure out where it goes in the instruction. */
switch (c)
{
case 'r':
case 'G':
ip->insn_opcode |= regno << 11;
break;
+ case 'U':
+ ip->insn_opcode |= regno << 11;
+ ip->insn_opcode |= regno << 16;
+ break;
case 'w':
case 't':
case 'E':
is $0. This only matches $0, and is checked
outside the switch. */
break;
+ case 'D':
+ /* Itbl operand; not yet implemented. FIXME ?? */
+ break;
+ /* What about all other operands like 'i', which
+ can be specified in the opcode table? */
}
lastregno = regno;
continue;
case 'D': /* floating point destination register */
case 'S': /* floating point source register */
case 'T': /* floating point target register */
+ case 'R': /* floating point source register */
case 'V':
case 'W':
s_reset = s;
- if (s[0] == '$' && s[1] == 'f' && isdigit (s[2]))
+ if (s[0] == '$' && s[1] == 'f' && isdigit ((unsigned char) s[2]))
{
s += 2;
regno = 0;
regno += *s - '0';
++s;
}
- while (isdigit (*s));
+ while (isdigit ((unsigned char) *s));
if (regno > 31)
- as_bad ("Invalid float register number (%d)", regno);
+ as_bad (_("Invalid float register number (%d)"), regno);
if ((regno & 1) != 0
- && mips_isa < 3
- && ! (strcmp (str, "mtc1") == 0 ||
- strcmp (str, "mfc1") == 0 ||
- strcmp (str, "lwc1") == 0 ||
- strcmp (str, "swc1") == 0))
- as_warn ("Float register should be even, was %d",
+ && ! ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && ! (strcmp (str, "mtc1") == 0
+ || strcmp (str, "mfc1") == 0
+ || strcmp (str, "lwc1") == 0
+ || strcmp (str, "swc1") == 0
+ || strcmp (str, "l.s") == 0
+ || strcmp (str, "s.s") == 0))
+ as_warn (_("Float register should be even, was %d"),
regno);
c = *args;
case 'W':
case 'T':
ip->insn_opcode |= regno << 16;
+ break;
+ case 'R':
+ ip->insn_opcode |= regno << 21;
+ break;
}
lastregno = regno;
continue;
}
+
switch (*args++)
{
case 'V':
case 'I':
my_getExpression (&imm_expr, s);
- if (imm_expr.X_op != O_big)
- check_absolute_expr (ip, &imm_expr);
+ if (imm_expr.X_op != O_big
+ && imm_expr.X_op != O_constant)
+ insn_error = _("absolute expression required");
s = expr_end;
continue;
input_line_pointer = save_in;
if (err != NULL && *err != '\0')
{
- as_bad ("Bad floating point constant: %s", err);
+ as_bad (_("Bad floating point constant: %s"), err);
memset (temp, '\0', sizeof temp);
length = f64 ? 8 : 4;
}
- assert (length == (f64 ? 8 : 4));
+ assert (length == (unsigned) (f64 ? 8 : 4));
if (*args == 'f'
|| (*args == 'l'
-#ifdef GPOPT
- && (mips_pic == EMBEDDED_PIC
- || g_switch_value < 4)
-#endif
- ))
+ && (! USE_GLOBAL_POINTER_OPT
+ || mips_pic == EMBEDDED_PIC
+ || g_switch_value < 4
+ || (temp[0] == 0 && temp[1] == 0)
+ || (temp[2] == 0 && temp[3] == 0))))
{
imm_expr.X_op = O_constant;
- if (byte_order == LITTLE_ENDIAN)
- imm_expr.X_add_number =
- (((((((int) temp[3] << 8)
- | temp[2]) << 8)
- | temp[1]) << 8)
- | temp[0]);
+ if (! target_big_endian)
+ imm_expr.X_add_number = bfd_getl32 (temp);
+ else
+ imm_expr.X_add_number = bfd_getb32 (temp);
+ }
+ else if (length > 4
+ && ! mips_disable_float_construction
+ && ((temp[0] == 0 && temp[1] == 0)
+ || (temp[2] == 0 && temp[3] == 0))
+ && ((temp[4] == 0 && temp[5] == 0)
+ || (temp[6] == 0 && temp[7] == 0)))
+ {
+ /* The value is simple enough to load with a
+ couple of instructions. In mips1 mode, set
+ imm_expr to the high order 32 bits and
+ offset_expr to the low order 32 bits.
+ Otherwise, set imm_expr to the entire 64 bit
+ constant. */
+ if (! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ {
+ imm_expr.X_op = O_constant;
+ offset_expr.X_op = O_constant;
+ if (! target_big_endian)
+ {
+ imm_expr.X_add_number = bfd_getl32 (temp + 4);
+ offset_expr.X_add_number = bfd_getl32 (temp);
+ }
+ else
+ {
+ imm_expr.X_add_number = bfd_getb32 (temp);
+ offset_expr.X_add_number = bfd_getb32 (temp + 4);
+ }
+ if (offset_expr.X_add_number == 0)
+ offset_expr.X_op = O_absent;
+ }
+ else if (sizeof (imm_expr.X_add_number) > 4)
+ {
+ imm_expr.X_op = O_constant;
+ if (! target_big_endian)
+ imm_expr.X_add_number = bfd_getl64 (temp);
+ else
+ imm_expr.X_add_number = bfd_getb64 (temp);
+ }
else
- imm_expr.X_add_number =
- (((((((int) temp[0] << 8)
- | temp[1]) << 8)
- | temp[2]) << 8)
- | temp[3]);
+ {
+ imm_expr.X_op = O_big;
+ imm_expr.X_add_number = 4;
+ if (! target_big_endian)
+ {
+ generic_bignum[0] = bfd_getl16 (temp);
+ generic_bignum[1] = bfd_getl16 (temp + 2);
+ generic_bignum[2] = bfd_getl16 (temp + 4);
+ generic_bignum[3] = bfd_getl16 (temp + 6);
+ }
+ else
+ {
+ generic_bignum[0] = bfd_getb16 (temp + 6);
+ generic_bignum[1] = bfd_getb16 (temp + 4);
+ generic_bignum[2] = bfd_getb16 (temp + 2);
+ generic_bignum[3] = bfd_getb16 (temp);
+ }
+ }
}
else
{
default: /* unused default case avoids warnings. */
case 'L':
newname = RDATA_SECTION_NAME;
-#ifdef GPOPT
- if (g_switch_value >= 8)
+ if ((USE_GLOBAL_POINTER_OPT && g_switch_value >= 8)
+ || mips_pic == EMBEDDED_PIC)
newname = ".lit8";
-#endif
break;
case 'F':
- newname = RDATA_SECTION_NAME;
+ if (mips_pic == EMBEDDED_PIC)
+ newname = ".lit8";
+ else
+ newname = RDATA_SECTION_NAME;
break;
case 'l':
-#ifdef GPOPT
- assert (g_switch_value >= 4);
-#endif
+ assert (!USE_GLOBAL_POINTER_OPT
+ || g_switch_value >= 4);
newname = ".lit4";
break;
}
new_seg = subseg_new (newname, (subsegT) 0);
- frag_align (*args == 'l' ? 2 : 3, 0);
-#ifdef OBJ_ELF
- record_alignment (new_seg, 4);
-#else
- record_alignment (new_seg, *args == 'l' ? 2 : 3);
-#endif
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ bfd_set_section_flags (stdoutput, new_seg,
+ (SEC_ALLOC
+ | SEC_LOAD
+ | SEC_READONLY
+ | SEC_DATA));
+ frag_align (*args == 'l' ? 2 : 3, 0, 0);
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour
+ && strcmp (TARGET_OS, "elf") != 0)
+ record_alignment (new_seg, 4);
+ else
+ record_alignment (new_seg, *args == 'l' ? 2 : 3);
if (seg == now_seg)
- as_bad ("Can't use floating point insn in this section");
+ as_bad (_("Can't use floating point insn in this section"));
/* Set the argument to the current address in the
section. */
case 'j': /* 16 bit signed immediate */
imm_reloc = BFD_RELOC_LO16;
c = my_getSmallExpression (&imm_expr, s);
- if (c)
+ if (c != '\0')
{
if (c != 'l')
{
imm_expr.X_add_number =
(imm_expr.X_add_number >> 16) & 0xffff;
else if (c == 'h')
- imm_reloc = BFD_RELOC_HI16_S;
+ {
+ imm_reloc = BFD_RELOC_HI16_S;
+ imm_unmatched_hi = true;
+ }
else
imm_reloc = BFD_RELOC_HI16;
}
+ else if (imm_expr.X_op == O_constant)
+ imm_expr.X_add_number &= 0xffff;
}
- else if (imm_expr.X_op != O_big)
- check_absolute_expr (ip, &imm_expr);
if (*args == 'i')
{
- if (imm_expr.X_op == O_big
- || imm_expr.X_add_number < 0
- || imm_expr.X_add_number >= 0x10000)
+ if ((c == '\0' && imm_expr.X_op != O_constant)
+ || ((imm_expr.X_add_number < 0
+ || imm_expr.X_add_number >= 0x10000)
+ && imm_expr.X_op == O_constant))
{
if (insn + 1 < &mips_opcodes[NUMOPCODES] &&
!strcmp (insn->name, insn[1].name))
break;
- as_bad ("16 bit expression not in range 0..65535");
+ if (imm_expr.X_op == O_constant
+ || imm_expr.X_op == O_big)
+ as_bad (_("16 bit expression not in range 0..65535"));
}
}
else
max = 0x8000;
else
max = 0x10000;
- if (imm_expr.X_op == O_big
- || imm_expr.X_add_number < -0x8000
- || imm_expr.X_add_number >= max)
+ if ((c == '\0' && imm_expr.X_op != O_constant)
+ || ((imm_expr.X_add_number < -0x8000
+ || imm_expr.X_add_number >= max)
+ && imm_expr.X_op == O_constant)
+ || (more
+ && imm_expr.X_add_number < 0
+ && ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && imm_expr.X_unsigned
+ && sizeof (imm_expr.X_add_number) <= 4))
{
if (more)
break;
- as_bad ("16 bit expression not in range -32768..32767");
+ if (imm_expr.X_op == O_constant
+ || imm_expr.X_op == O_big)
+ as_bad (_("16 bit expression not in range -32768..32767"));
}
}
s = expr_end;
|| offset_expr.X_add_number < -0x8000)
&& (mips_pic != EMBEDDED_PIC
|| offset_expr.X_op != O_subtract
- || now_seg != text_section
- || (S_GET_SEGMENT (offset_expr.X_op_symbol)
- != text_section)))
+ || (S_GET_SEGMENT (offset_expr.X_add_symbol)
+ != S_GET_SEGMENT (offset_expr.X_op_symbol))))
break;
- offset_reloc = BFD_RELOC_LO16;
if (c == 'h' || c == 'H')
{
- assert (offset_expr.X_op == O_constant);
+ if (offset_expr.X_op != O_constant)
+ break;
offset_expr.X_add_number =
(offset_expr.X_add_number >> 16) & 0xffff;
}
+ offset_reloc = BFD_RELOC_LO16;
s = expr_end;
continue;
case 'u': /* upper 16 bits */
c = my_getSmallExpression (&imm_expr, s);
- if (imm_expr.X_op == O_constant
- && (imm_expr.X_add_number < 0
- || imm_expr.X_add_number >= 0x10000))
- as_bad ("lui expression not in range 0..65535");
imm_reloc = BFD_RELOC_LO16;
if (c)
{
imm_expr.X_add_number =
(imm_expr.X_add_number >> 16) & 0xffff;
else if (c == 'h')
- imm_reloc = BFD_RELOC_HI16_S;
+ {
+ imm_reloc = BFD_RELOC_HI16_S;
+ imm_unmatched_hi = true;
+ }
else
imm_reloc = BFD_RELOC_HI16;
}
+ else if (imm_expr.X_op == O_constant)
+ imm_expr.X_add_number &= 0xffff;
}
+ if (imm_expr.X_op == O_constant
+ && (imm_expr.X_add_number < 0
+ || imm_expr.X_add_number >= 0x10000))
+ as_bad (_("lui expression not in range 0..65535"));
s = expr_end;
continue;
offset_reloc = BFD_RELOC_MIPS_JMP;
continue;
+ case 'N': /* 3 bit branch condition code */
+ case 'M': /* 3 bit compare condition code */
+ if (strncmp (s, "$fcc", 4) != 0)
+ break;
+ s += 4;
+ regno = 0;
+ do
+ {
+ regno *= 10;
+ regno += *s - '0';
+ ++s;
+ }
+ while (isdigit ((unsigned char) *s));
+ if (regno > 7)
+ as_bad (_("invalid condition code register $fcc%d"), regno);
+ if (*args == 'N')
+ ip->insn_opcode |= regno << OP_SH_BCC;
+ else
+ ip->insn_opcode |= regno << OP_SH_CCC;
+ continue;
+
+ case 'H':
+ if (s[0] == '0' && (s[1] == 'x' || s[1] == 'X'))
+ s += 2;
+ if (isdigit ((unsigned char) *s))
+ {
+ c = 0;
+ do
+ {
+ c *= 10;
+ c += *s - '0';
+ ++s;
+ }
+ while (isdigit ((unsigned char) *s));
+ }
+ else
+ c = 8; /* Invalid sel value. */
+
+ if (c > 7)
+ as_bad (_("invalid coprocessor sub-selection value (0-7)"));
+ ip->insn_opcode |= c;
+ continue;
+
default:
- fprintf (stderr, "bad char = '%c'\n", *args);
+ as_bad (_("bad char = '%c'\n"), *args);
internalError ();
}
break;
s = argsStart;
continue;
}
- insn_error = "ERROR: Illegal operands";
+ insn_error = _("illegal operands");
return;
}
}
-#define LP '('
-#define RP ')'
+/* This routine assembles an instruction into its binary format when
+ assembling for the mips16. As a side effect, it sets one of the
+ global variables imm_reloc or offset_reloc to the type of
+ relocation to do if one of the operands is an address expression.
+ It also sets mips16_small and mips16_ext if the user explicitly
+ requested a small or extended instruction. */
-static int
-my_getSmallExpression (ep, str)
- expressionS *ep;
+static void
+mips16_ip (str, ip)
char *str;
+ struct mips_cl_insn *ip;
{
- char *sp;
- int c = 0;
+ char *s;
+ const char *args;
+ struct mips_opcode *insn;
+ char *argsstart;
+ unsigned int regno;
+ unsigned int lastregno = 0;
+ char *s_reset;
- if (*str == ' ')
- str++;
- if (*str == LP
- || (*str == '%' &&
- ((str[1] == 'h' && str[2] == 'i')
- || (str[1] == 'H' && str[2] == 'I')
- || (str[1] == 'l' && str[2] == 'o'))
- && str[3] == LP))
+ insn_error = NULL;
+
+ mips16_small = false;
+ mips16_ext = false;
+
+ for (s = str; islower ((unsigned char) *s); ++s)
+ ;
+ switch (*s)
{
- if (*str == LP)
- c = 0;
- else
- {
- c = str[1];
- str += 3;
- }
+ case '\0':
+ break;
- /*
- * A small expression may be followed by a base register.
+ case ' ':
+ *s++ = '\0';
+ break;
+
+ case '.':
+ if (s[1] == 't' && s[2] == ' ')
+ {
+ *s = '\0';
+ mips16_small = true;
+ s += 3;
+ break;
+ }
+ else if (s[1] == 'e' && s[2] == ' ')
+ {
+ *s = '\0';
+ mips16_ext = true;
+ s += 3;
+ break;
+ }
+ /* Fall through. */
+ default:
+ insn_error = _("unknown opcode");
+ return;
+ }
+
+ if (mips_opts.noautoextend && ! mips16_ext)
+ mips16_small = true;
+
+ if ((insn = (struct mips_opcode *) hash_find (mips16_op_hash, str)) == NULL)
+ {
+ insn_error = _("unrecognized opcode");
+ return;
+ }
+
+ argsstart = s;
+ for (;;)
+ {
+ assert (strcmp (insn->name, str) == 0);
+
+ ip->insn_mo = insn;
+ ip->insn_opcode = insn->match;
+ ip->use_extend = false;
+ imm_expr.X_op = O_absent;
+ imm_reloc = BFD_RELOC_UNUSED;
+ offset_expr.X_op = O_absent;
+ offset_reloc = BFD_RELOC_UNUSED;
+ for (args = insn->args; 1; ++args)
+ {
+ int c;
+
+ if (*s == ' ')
+ ++s;
+
+ /* In this switch statement we call break if we did not find
+ a match, continue if we did find a match, or return if we
+ are done. */
+
+ c = *args;
+ switch (c)
+ {
+ case '\0':
+ if (*s == '\0')
+ {
+ /* Stuff the immediate value in now, if we can. */
+ if (imm_expr.X_op == O_constant
+ && imm_reloc > BFD_RELOC_UNUSED
+ && insn->pinfo != INSN_MACRO)
+ {
+ mips16_immed ((char *) NULL, 0,
+ imm_reloc - BFD_RELOC_UNUSED,
+ imm_expr.X_add_number, true, mips16_small,
+ mips16_ext, &ip->insn_opcode,
+ &ip->use_extend, &ip->extend);
+ imm_expr.X_op = O_absent;
+ imm_reloc = BFD_RELOC_UNUSED;
+ }
+
+ return;
+ }
+ break;
+
+ case ',':
+ if (*s++ == c)
+ continue;
+ s--;
+ switch (*++args)
+ {
+ case 'v':
+ ip->insn_opcode |= lastregno << MIPS16OP_SH_RX;
+ continue;
+ case 'w':
+ ip->insn_opcode |= lastregno << MIPS16OP_SH_RY;
+ continue;
+ }
+ break;
+
+ case '(':
+ case ')':
+ if (*s++ == c)
+ continue;
+ break;
+
+ case 'v':
+ case 'w':
+ if (s[0] != '$')
+ {
+ if (c == 'v')
+ ip->insn_opcode |= lastregno << MIPS16OP_SH_RX;
+ else
+ ip->insn_opcode |= lastregno << MIPS16OP_SH_RY;
+ ++args;
+ continue;
+ }
+ /* Fall through. */
+ case 'x':
+ case 'y':
+ case 'z':
+ case 'Z':
+ case '0':
+ case 'S':
+ case 'R':
+ case 'X':
+ case 'Y':
+ if (s[0] != '$')
+ break;
+ s_reset = s;
+ if (isdigit ((unsigned char) s[1]))
+ {
+ ++s;
+ regno = 0;
+ do
+ {
+ regno *= 10;
+ regno += *s - '0';
+ ++s;
+ }
+ while (isdigit ((unsigned char) *s));
+ if (regno > 31)
+ {
+ as_bad (_("invalid register number (%d)"), regno);
+ regno = 2;
+ }
+ }
+ else
+ {
+ if (s[1] == 'f' && s[2] == 'p')
+ {
+ s += 3;
+ regno = FP;
+ }
+ else if (s[1] == 's' && s[2] == 'p')
+ {
+ s += 3;
+ regno = SP;
+ }
+ else if (s[1] == 'g' && s[2] == 'p')
+ {
+ s += 3;
+ regno = GP;
+ }
+ else if (s[1] == 'a' && s[2] == 't')
+ {
+ s += 3;
+ regno = AT;
+ }
+ else if (s[1] == 'k' && s[2] == 't' && s[3] == '0')
+ {
+ s += 4;
+ regno = KT0;
+ }
+ else if (s[1] == 'k' && s[2] == 't' && s[3] == '1')
+ {
+ s += 4;
+ regno = KT1;
+ }
+ else
+ break;
+ }
+
+ if (*s == ' ')
+ ++s;
+ if (args[1] != *s)
+ {
+ if (c == 'v' || c == 'w')
+ {
+ regno = mips16_to_32_reg_map[lastregno];
+ s = s_reset;
+ args++;
+ }
+ }
+
+ switch (c)
+ {
+ case 'x':
+ case 'y':
+ case 'z':
+ case 'v':
+ case 'w':
+ case 'Z':
+ regno = mips32_to_16_reg_map[regno];
+ break;
+
+ case '0':
+ if (regno != 0)
+ regno = ILLEGAL_REG;
+ break;
+
+ case 'S':
+ if (regno != SP)
+ regno = ILLEGAL_REG;
+ break;
+
+ case 'R':
+ if (regno != RA)
+ regno = ILLEGAL_REG;
+ break;
+
+ case 'X':
+ case 'Y':
+ if (regno == AT && ! mips_opts.noat)
+ as_warn (_("used $at without \".set noat\""));
+ break;
+
+ default:
+ internalError ();
+ }
+
+ if (regno == ILLEGAL_REG)
+ break;
+
+ switch (c)
+ {
+ case 'x':
+ case 'v':
+ ip->insn_opcode |= regno << MIPS16OP_SH_RX;
+ break;
+ case 'y':
+ case 'w':
+ ip->insn_opcode |= regno << MIPS16OP_SH_RY;
+ break;
+ case 'z':
+ ip->insn_opcode |= regno << MIPS16OP_SH_RZ;
+ break;
+ case 'Z':
+ ip->insn_opcode |= regno << MIPS16OP_SH_MOVE32Z;
+ case '0':
+ case 'S':
+ case 'R':
+ break;
+ case 'X':
+ ip->insn_opcode |= regno << MIPS16OP_SH_REGR32;
+ break;
+ case 'Y':
+ regno = ((regno & 7) << 2) | ((regno & 0x18) >> 3);
+ ip->insn_opcode |= regno << MIPS16OP_SH_REG32R;
+ break;
+ default:
+ internalError ();
+ }
+
+ lastregno = regno;
+ continue;
+
+ case 'P':
+ if (strncmp (s, "$pc", 3) == 0)
+ {
+ s += 3;
+ continue;
+ }
+ break;
+
+ case '<':
+ case '>':
+ case '[':
+ case ']':
+ case '4':
+ case '5':
+ case 'H':
+ case 'W':
+ case 'D':
+ case 'j':
+ case '8':
+ case 'V':
+ case 'C':
+ case 'U':
+ case 'k':
+ case 'K':
+ if (s[0] == '%'
+ && strncmp (s + 1, "gprel(", sizeof "gprel(" - 1) == 0)
+ {
+ /* This is %gprel(SYMBOL). We need to read SYMBOL,
+ and generate the appropriate reloc. If the text
+ inside %gprel is not a symbol name with an
+ optional offset, then we generate a normal reloc
+ and will probably fail later. */
+ my_getExpression (&imm_expr, s + sizeof "%gprel" - 1);
+ if (imm_expr.X_op == O_symbol)
+ {
+ mips16_ext = true;
+ imm_reloc = BFD_RELOC_MIPS16_GPREL;
+ s = expr_end;
+ ip->use_extend = true;
+ ip->extend = 0;
+ continue;
+ }
+ }
+ else
+ {
+ /* Just pick up a normal expression. */
+ my_getExpression (&imm_expr, s);
+ }
+
+ if (imm_expr.X_op == O_register)
+ {
+ /* What we thought was an expression turned out to
+ be a register. */
+
+ if (s[0] == '(' && args[1] == '(')
+ {
+ /* It looks like the expression was omitted
+ before a register indirection, which means
+ that the expression is implicitly zero. We
+ still set up imm_expr, so that we handle
+ explicit extensions correctly. */
+ imm_expr.X_op = O_constant;
+ imm_expr.X_add_number = 0;
+ imm_reloc = (int) BFD_RELOC_UNUSED + c;
+ continue;
+ }
+
+ break;
+ }
+
+ /* We need to relax this instruction. */
+ imm_reloc = (int) BFD_RELOC_UNUSED + c;
+ s = expr_end;
+ continue;
+
+ case 'p':
+ case 'q':
+ case 'A':
+ case 'B':
+ case 'E':
+ /* We use offset_reloc rather than imm_reloc for the PC
+ relative operands. This lets macros with both
+ immediate and address operands work correctly. */
+ my_getExpression (&offset_expr, s);
+
+ if (offset_expr.X_op == O_register)
+ break;
+
+ /* We need to relax this instruction. */
+ offset_reloc = (int) BFD_RELOC_UNUSED + c;
+ s = expr_end;
+ continue;
+
+ case '6': /* break code */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > 63)
+ {
+ as_warn (_("Invalid value for `%s' (%lu)"),
+ ip->insn_mo->name,
+ (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= 0x3f;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number << MIPS16OP_SH_IMM6;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ case 'a': /* 26 bit address */
+ my_getExpression (&offset_expr, s);
+ s = expr_end;
+ offset_reloc = BFD_RELOC_MIPS16_JMP;
+ ip->insn_opcode <<= 16;
+ continue;
+
+ case 'l': /* register list for entry macro */
+ case 'L': /* register list for exit macro */
+ {
+ int mask;
+
+ if (c == 'l')
+ mask = 0;
+ else
+ mask = 7 << 3;
+ while (*s != '\0')
+ {
+ int freg, reg1, reg2;
+
+ while (*s == ' ' || *s == ',')
+ ++s;
+ if (*s != '$')
+ {
+ as_bad (_("can't parse register list"));
+ break;
+ }
+ ++s;
+ if (*s != 'f')
+ freg = 0;
+ else
+ {
+ freg = 1;
+ ++s;
+ }
+ reg1 = 0;
+ while (isdigit ((unsigned char) *s))
+ {
+ reg1 *= 10;
+ reg1 += *s - '0';
+ ++s;
+ }
+ if (*s == ' ')
+ ++s;
+ if (*s != '-')
+ reg2 = reg1;
+ else
+ {
+ ++s;
+ if (*s != '$')
+ break;
+ ++s;
+ if (freg)
+ {
+ if (*s == 'f')
+ ++s;
+ else
+ {
+ as_bad (_("invalid register list"));
+ break;
+ }
+ }
+ reg2 = 0;
+ while (isdigit ((unsigned char) *s))
+ {
+ reg2 *= 10;
+ reg2 += *s - '0';
+ ++s;
+ }
+ }
+ if (freg && reg1 == 0 && reg2 == 0 && c == 'L')
+ {
+ mask &= ~ (7 << 3);
+ mask |= 5 << 3;
+ }
+ else if (freg && reg1 == 0 && reg2 == 1 && c == 'L')
+ {
+ mask &= ~ (7 << 3);
+ mask |= 6 << 3;
+ }
+ else if (reg1 == 4 && reg2 >= 4 && reg2 <= 7 && c != 'L')
+ mask |= (reg2 - 3) << 3;
+ else if (reg1 == 16 && reg2 >= 16 && reg2 <= 17)
+ mask |= (reg2 - 15) << 1;
+ else if (reg1 == 31 && reg2 == 31)
+ mask |= 1;
+ else
+ {
+ as_bad (_("invalid register list"));
+ break;
+ }
+ }
+ /* The mask is filled in in the opcode table for the
+ benefit of the disassembler. We remove it before
+ applying the actual mask. */
+ ip->insn_opcode &= ~ ((7 << 3) << MIPS16OP_SH_IMM6);
+ ip->insn_opcode |= mask << MIPS16OP_SH_IMM6;
+ }
+ continue;
+
+ case 'e': /* extend code */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > 0x7ff)
+ {
+ as_warn (_("Invalid value for `%s' (%lu)"),
+ ip->insn_mo->name,
+ (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= 0x7ff;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
+ default:
+ internalError ();
+ }
+ break;
+ }
+
+ /* Args don't match. */
+ if (insn + 1 < &mips16_opcodes[bfd_mips16_num_opcodes] &&
+ strcmp (insn->name, insn[1].name) == 0)
+ {
+ ++insn;
+ s = argsstart;
+ continue;
+ }
+
+ insn_error = _("illegal operands");
+
+ return;
+ }
+}
+
+/* This structure holds information we know about a mips16 immediate
+ argument type. */
+
+struct mips16_immed_operand
+{
+ /* The type code used in the argument string in the opcode table. */
+ int type;
+ /* The number of bits in the short form of the opcode. */
+ int nbits;
+ /* The number of bits in the extended form of the opcode. */
+ int extbits;
+ /* The amount by which the short form is shifted when it is used;
+ for example, the sw instruction has a shift count of 2. */
+ int shift;
+ /* The amount by which the short form is shifted when it is stored
+ into the instruction code. */
+ int op_shift;
+ /* Non-zero if the short form is unsigned. */
+ int unsp;
+ /* Non-zero if the extended form is unsigned. */
+ int extu;
+ /* Non-zero if the value is PC relative. */
+ int pcrel;
+};
+
+/* The mips16 immediate operand types. */
+
+static const struct mips16_immed_operand mips16_immed_operands[] =
+{
+ { '<', 3, 5, 0, MIPS16OP_SH_RZ, 1, 1, 0 },
+ { '>', 3, 5, 0, MIPS16OP_SH_RX, 1, 1, 0 },
+ { '[', 3, 6, 0, MIPS16OP_SH_RZ, 1, 1, 0 },
+ { ']', 3, 6, 0, MIPS16OP_SH_RX, 1, 1, 0 },
+ { '4', 4, 15, 0, MIPS16OP_SH_IMM4, 0, 0, 0 },
+ { '5', 5, 16, 0, MIPS16OP_SH_IMM5, 1, 0, 0 },
+ { 'H', 5, 16, 1, MIPS16OP_SH_IMM5, 1, 0, 0 },
+ { 'W', 5, 16, 2, MIPS16OP_SH_IMM5, 1, 0, 0 },
+ { 'D', 5, 16, 3, MIPS16OP_SH_IMM5, 1, 0, 0 },
+ { 'j', 5, 16, 0, MIPS16OP_SH_IMM5, 0, 0, 0 },
+ { '8', 8, 16, 0, MIPS16OP_SH_IMM8, 1, 0, 0 },
+ { 'V', 8, 16, 2, MIPS16OP_SH_IMM8, 1, 0, 0 },
+ { 'C', 8, 16, 3, MIPS16OP_SH_IMM8, 1, 0, 0 },
+ { 'U', 8, 16, 0, MIPS16OP_SH_IMM8, 1, 1, 0 },
+ { 'k', 8, 16, 0, MIPS16OP_SH_IMM8, 0, 0, 0 },
+ { 'K', 8, 16, 3, MIPS16OP_SH_IMM8, 0, 0, 0 },
+ { 'p', 8, 16, 0, MIPS16OP_SH_IMM8, 0, 0, 1 },
+ { 'q', 11, 16, 0, MIPS16OP_SH_IMM8, 0, 0, 1 },
+ { 'A', 8, 16, 2, MIPS16OP_SH_IMM8, 1, 0, 1 },
+ { 'B', 5, 16, 3, MIPS16OP_SH_IMM5, 1, 0, 1 },
+ { 'E', 5, 16, 2, MIPS16OP_SH_IMM5, 1, 0, 1 }
+};
+
+#define MIPS16_NUM_IMMED \
+ (sizeof mips16_immed_operands / sizeof mips16_immed_operands[0])
+
+/* Handle a mips16 instruction with an immediate value. This or's the
+ small immediate value into *INSN. It sets *USE_EXTEND to indicate
+ whether an extended value is needed; if one is needed, it sets
+ *EXTEND to the value. The argument type is TYPE. The value is VAL.
+ If SMALL is true, an unextended opcode was explicitly requested.
+ If EXT is true, an extended opcode was explicitly requested. If
+ WARN is true, warn if EXT does not match reality. */
+
+static void
+mips16_immed (file, line, type, val, warn, small, ext, insn, use_extend,
+ extend)
+ char *file;
+ unsigned int line;
+ int type;
+ offsetT val;
+ boolean warn;
+ boolean small;
+ boolean ext;
+ unsigned long *insn;
+ boolean *use_extend;
+ unsigned short *extend;
+{
+ register const struct mips16_immed_operand *op;
+ int mintiny, maxtiny;
+ boolean needext;
+
+ op = mips16_immed_operands;
+ while (op->type != type)
+ {
+ ++op;
+ assert (op < mips16_immed_operands + MIPS16_NUM_IMMED);
+ }
+
+ if (op->unsp)
+ {
+ if (type == '<' || type == '>' || type == '[' || type == ']')
+ {
+ mintiny = 1;
+ maxtiny = 1 << op->nbits;
+ }
+ else
+ {
+ mintiny = 0;
+ maxtiny = (1 << op->nbits) - 1;
+ }
+ }
+ else
+ {
+ mintiny = - (1 << (op->nbits - 1));
+ maxtiny = (1 << (op->nbits - 1)) - 1;
+ }
+
+ /* Branch offsets have an implicit 0 in the lowest bit. */
+ if (type == 'p' || type == 'q')
+ val /= 2;
+
+ if ((val & ((1 << op->shift) - 1)) != 0
+ || val < (mintiny << op->shift)
+ || val > (maxtiny << op->shift))
+ needext = true;
+ else
+ needext = false;
+
+ if (warn && ext && ! needext)
+ as_warn_where (file, line,
+ _("extended operand requested but not required"));
+ if (small && needext)
+ as_bad_where (file, line, _("invalid unextended operand value"));
+
+ if (small || (! ext && ! needext))
+ {
+ int insnval;
+
+ *use_extend = false;
+ insnval = ((val >> op->shift) & ((1 << op->nbits) - 1));
+ insnval <<= op->op_shift;
+ *insn |= insnval;
+ }
+ else
+ {
+ long minext, maxext;
+ int extval;
+
+ if (op->extu)
+ {
+ minext = 0;
+ maxext = (1 << op->extbits) - 1;
+ }
+ else
+ {
+ minext = - (1 << (op->extbits - 1));
+ maxext = (1 << (op->extbits - 1)) - 1;
+ }
+ if (val < minext || val > maxext)
+ as_bad_where (file, line,
+ _("operand value out of range for instruction"));
+
+ *use_extend = true;
+ if (op->extbits == 16)
+ {
+ extval = ((val >> 11) & 0x1f) | (val & 0x7e0);
+ val &= 0x1f;
+ }
+ else if (op->extbits == 15)
+ {
+ extval = ((val >> 11) & 0xf) | (val & 0x7f0);
+ val &= 0xf;
+ }
+ else
+ {
+ extval = ((val & 0x1f) << 6) | (val & 0x20);
+ val = 0;
+ }
+
+ *extend = (unsigned short) extval;
+ *insn |= val;
+ }
+}
+\f
+#define LP '('
+#define RP ')'
+
+static int
+my_getSmallExpression (ep, str)
+ expressionS *ep;
+ char *str;
+{
+ char *sp;
+ int c = 0;
+
+ if (*str == ' ')
+ str++;
+ if (*str == LP
+ || (*str == '%' &&
+ ((str[1] == 'h' && str[2] == 'i')
+ || (str[1] == 'H' && str[2] == 'I')
+ || (str[1] == 'l' && str[2] == 'o'))
+ && str[3] == LP))
+ {
+ if (*str == LP)
+ c = 0;
+ else
+ {
+ c = str[1];
+ str += 3;
+ }
+
+ /*
+ * A small expression may be followed by a base register.
* Scan to the end of this operand, and then back over a possible
* base register. Then scan the small expression up to that
* point. (Based on code in sparc.c...)
;
if (sp - 4 >= str && sp[-1] == RP)
{
- if (isdigit (sp[-2]))
+ if (isdigit ((unsigned char) sp[-2]))
{
- for (sp -= 3; sp >= str && isdigit (*sp); sp--)
+ for (sp -= 3; sp >= str && isdigit ((unsigned char) *sp); sp--)
;
if (*sp == '$' && sp > str && sp[-1] == LP)
{
expression (ep);
expr_end = input_line_pointer;
input_line_pointer = save_in;
+
+ /* If we are in mips16 mode, and this is an expression based on `.',
+ then we bump the value of the symbol by 1 since that is how other
+ text symbols are handled. We don't bother to handle complex
+ expressions, just `.' plus or minus a constant. */
+ if (mips_opts.mips16
+ && ep->X_op == O_symbol
+ && strcmp (S_GET_NAME (ep->X_add_symbol), FAKE_LABEL_NAME) == 0
+ && S_GET_SEGMENT (ep->X_add_symbol) == now_seg
+ && symbol_get_frag (ep->X_add_symbol) == frag_now
+ && symbol_constant_p (ep->X_add_symbol)
+ && S_GET_VALUE (ep->X_add_symbol) == frag_now_fix ())
+ S_SET_VALUE (ep->X_add_symbol, S_GET_VALUE (ep->X_add_symbol) + 1);
}
/* Turn a string in input_line_pointer into a floating point constant
- of type type, and store the appropriate bytes in *litP. The number
- of LITTLENUMS emitted is stored in *sizeP . An error message is
+ of type TYPE, and store the appropriate bytes in *LITP. The number
+ of LITTLENUMS emitted is stored in *SIZEP. An error message is
returned, or NULL on OK. */
char *
default:
*sizeP = 0;
- return "bad call to md_atof";
+ return _("bad call to md_atof");
}
t = atof_ieee (input_line_pointer, type, words);
*sizeP = prec * 2;
- if (byte_order == LITTLE_ENDIAN)
+ if (! target_big_endian)
{
for (i = prec - 1; i >= 0; i--)
{
litP += 2;
}
}
-
+
return NULL;
}
valueT val;
int n;
{
- switch (byte_order)
- {
- case LITTLE_ENDIAN:
- number_to_chars_littleendian (buf, val, n);
- break;
-
- case BIG_ENDIAN:
- number_to_chars_bigendian (buf, val, n);
- break;
-
- default:
- internalError ();
- }
+ if (target_big_endian)
+ number_to_chars_bigendian (buf, val, n);
+ else
+ number_to_chars_littleendian (buf, val, n);
}
\f
-#ifdef GPOPT
CONST char *md_shortopts = "O::g::G:";
-#else
-CONST char *md_shortopts = "O::g::";
-#endif
-struct option md_longopts[] = {
+
+struct option md_longopts[] =
+{
#define OPTION_MIPS1 (OPTION_MD_BASE + 1)
{"mips0", no_argument, NULL, OPTION_MIPS1},
{"mips1", no_argument, NULL, OPTION_MIPS1},
{"mips2", no_argument, NULL, OPTION_MIPS2},
#define OPTION_MIPS3 (OPTION_MD_BASE + 3)
{"mips3", no_argument, NULL, OPTION_MIPS3},
-#define OPTION_MCPU (OPTION_MD_BASE + 4)
+#define OPTION_MIPS4 (OPTION_MD_BASE + 4)
+ {"mips4", no_argument, NULL, OPTION_MIPS4},
+#define OPTION_MCPU (OPTION_MD_BASE + 5)
{"mcpu", required_argument, NULL, OPTION_MCPU},
-#define OPTION_MEMBEDDED_PIC (OPTION_MD_BASE + 5)
+#define OPTION_MEMBEDDED_PIC (OPTION_MD_BASE + 6)
{"membedded-pic", no_argument, NULL, OPTION_MEMBEDDED_PIC},
-#define OPTION_TRAP (OPTION_MD_BASE + 8)
+#define OPTION_TRAP (OPTION_MD_BASE + 7)
{"trap", no_argument, NULL, OPTION_TRAP},
{"no-break", no_argument, NULL, OPTION_TRAP},
-#define OPTION_BREAK (OPTION_MD_BASE + 9)
+#define OPTION_BREAK (OPTION_MD_BASE + 8)
{"break", no_argument, NULL, OPTION_BREAK},
{"no-trap", no_argument, NULL, OPTION_BREAK},
-#define OPTION_EB (OPTION_MD_BASE + 10)
+#define OPTION_EB (OPTION_MD_BASE + 9)
{"EB", no_argument, NULL, OPTION_EB},
-#define OPTION_EL (OPTION_MD_BASE + 11)
+#define OPTION_EL (OPTION_MD_BASE + 10)
{"EL", no_argument, NULL, OPTION_EL},
-
+#define OPTION_M4650 (OPTION_MD_BASE + 11)
+ {"m4650", no_argument, NULL, OPTION_M4650},
+#define OPTION_NO_M4650 (OPTION_MD_BASE + 12)
+ {"no-m4650", no_argument, NULL, OPTION_NO_M4650},
+#define OPTION_M4010 (OPTION_MD_BASE + 13)
+ {"m4010", no_argument, NULL, OPTION_M4010},
+#define OPTION_NO_M4010 (OPTION_MD_BASE + 14)
+ {"no-m4010", no_argument, NULL, OPTION_NO_M4010},
+#define OPTION_M4100 (OPTION_MD_BASE + 15)
+ {"m4100", no_argument, NULL, OPTION_M4100},
+#define OPTION_NO_M4100 (OPTION_MD_BASE + 16)
+ {"no-m4100", no_argument, NULL, OPTION_NO_M4100},
+#define OPTION_MIPS16 (OPTION_MD_BASE + 17)
+ {"mips16", no_argument, NULL, OPTION_MIPS16},
+#define OPTION_NO_MIPS16 (OPTION_MD_BASE + 18)
+ {"no-mips16", no_argument, NULL, OPTION_NO_MIPS16},
+#define OPTION_M3900 (OPTION_MD_BASE + 19)
+ {"m3900", no_argument, NULL, OPTION_M3900},
+#define OPTION_NO_M3900 (OPTION_MD_BASE + 20)
+ {"no-m3900", no_argument, NULL, OPTION_NO_M3900},
+#define OPTION_MABI (OPTION_MD_BASE + 21)
+ {"mabi", required_argument, NULL, OPTION_MABI},
+#define OPTION_M7000_HILO_FIX (OPTION_MD_BASE + 22)
+ {"mfix7000", no_argument, NULL, OPTION_M7000_HILO_FIX},
+#define OPTION_NO_M7000_HILO_FIX (OPTION_MD_BASE + 23)
+ {"no-fix-7000", no_argument, NULL, OPTION_NO_M7000_HILO_FIX},
+#define OPTION_GP32 (OPTION_MD_BASE + 24)
+ {"mgp32", no_argument, NULL, OPTION_GP32},
+#define OPTION_GP64 (OPTION_MD_BASE + 25)
+ {"mgp64", no_argument, NULL, OPTION_GP64},
+#define OPTION_CONSTRUCT_FLOATS (OPTION_MD_BASE + 26)
+ {"construct-floats", no_argument, NULL, OPTION_CONSTRUCT_FLOATS},
+#define OPTION_NO_CONSTRUCT_FLOATS (OPTION_MD_BASE + 27)
+ {"no-construct-floats", no_argument, NULL, OPTION_NO_CONSTRUCT_FLOATS},
+#define OPTION_MIPS32 (OPTION_MD_BASE + 28)
+ {"mips32", no_argument, NULL, OPTION_MIPS32},
+#define OPTION_MIPS5 (OPTION_MD_BASE + 29)
+ {"mips5", no_argument, NULL, OPTION_MIPS5},
+#define OPTION_MIPS64 (OPTION_MD_BASE + 30)
+ {"mips64", no_argument, NULL, OPTION_MIPS64},
#ifdef OBJ_ELF
-#define OPTION_CALL_SHARED (OPTION_MD_BASE + 6)
- {"KPIC", no_argument, NULL, OPTION_CALL_SHARED},
+#define OPTION_ELF_BASE (OPTION_MD_BASE + 35)
+#define OPTION_CALL_SHARED (OPTION_ELF_BASE + 0)
+#define OPTION_NON_SHARED (OPTION_ELF_BASE + 1)
+#define OPTION_XGOT (OPTION_ELF_BASE + 2)
+#define OPTION_32 (OPTION_ELF_BASE + 3)
+#define OPTION_64 (OPTION_ELF_BASE + 4)
+ {"KPIC", no_argument, NULL, OPTION_CALL_SHARED},
{"call_shared", no_argument, NULL, OPTION_CALL_SHARED},
-#define OPTION_NON_SHARED (OPTION_MD_BASE + 7)
- {"non_shared", no_argument, NULL, OPTION_NON_SHARED},
+ {"non_shared", no_argument, NULL, OPTION_NON_SHARED},
+ {"xgot", no_argument, NULL, OPTION_XGOT},
+ {"32", no_argument, NULL, OPTION_32},
+ {"64", no_argument, NULL, OPTION_64},
#endif
{NULL, no_argument, NULL, 0}
};
-size_t md_longopts_size = sizeof(md_longopts);
+size_t md_longopts_size = sizeof (md_longopts);
int
md_parse_option (c, arg)
{
switch (c)
{
+ case OPTION_CONSTRUCT_FLOATS:
+ mips_disable_float_construction = 0;
+ break;
+
+ case OPTION_NO_CONSTRUCT_FLOATS:
+ mips_disable_float_construction = 1;
+ break;
+
case OPTION_TRAP:
mips_trap = 1;
break;
break;
case OPTION_EB:
- byte_order = BIG_ENDIAN;
-#ifdef OBJ_AOUT
- mips_target_format = "a.out-mips-big";
-#endif
-#ifdef OBJ_ECOFF
- mips_target_format = "ecoff-bigmips";
-#endif
-#ifdef OBJ_ELF
- mips_target_format = "elf32-bigmips";
-#endif
+ target_big_endian = 1;
break;
case OPTION_EL:
- byte_order = LITTLE_ENDIAN;
-#ifdef OBJ_AOUT
- mips_target_format = "a.out-mips-little";
-#endif
-#ifdef OBJ_ECOFF
- mips_target_format = "ecoff-littlemips";
-#endif
-#ifdef OBJ_ELF
- mips_target_format = "elf32-littlemips";
-#endif
+ target_big_endian = 0;
break;
case 'O':
break;
case 'g':
- if (arg == NULL || arg[1] == '2')
- mips_optimize = 0;
+ if (arg == NULL)
+ mips_debug = 2;
+ else
+ mips_debug = atoi (arg);
+ /* When the MIPS assembler sees -g or -g2, it does not do
+ optimizations which limit full symbolic debugging. We take
+ that to be equivalent to -O0. */
+ if (mips_debug == 2)
+ mips_optimize = 1;
break;
case OPTION_MIPS1:
- mips_isa = 1;
- if (mips_cpu == -1)
- mips_cpu = 3000;
+ mips_opts.isa = ISA_MIPS1;
break;
case OPTION_MIPS2:
- mips_isa = 2;
- if (mips_cpu == -1)
- mips_cpu = 6000;
+ mips_opts.isa = ISA_MIPS2;
break;
case OPTION_MIPS3:
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 4000;
+ mips_opts.isa = ISA_MIPS3;
+ break;
+
+ case OPTION_MIPS4:
+ mips_opts.isa = ISA_MIPS4;
+ break;
+
+ case OPTION_MIPS5:
+ mips_opts.isa = ISA_MIPS5;
+ break;
+
+ case OPTION_MIPS32:
+ mips_opts.isa = ISA_MIPS32;
+ break;
+
+ case OPTION_MIPS64:
+ mips_opts.isa = ISA_MIPS64;
break;
case OPTION_MCPU:
{
- char *p;
-
- /* Identify the processor type */
- p = arg;
- if (strcmp (p, "default") == 0
- || strcmp (p, "DEFAULT") == 0)
- mips_cpu = -1;
+ /* Identify the processor type. */
+ if (strcasecmp (arg, "default") == 0)
+ mips_cpu = CPU_UNKNOWN;
else
{
- if (*p == 'r' || *p == 'R')
- p++;
+ const struct mips_cpu_info *ci;
- mips_cpu = -1;
- switch (*p)
- {
- case '2':
- if (strcmp (p, "2000") == 0
- || strcmp (p, "2k") == 0
- || strcmp (p, "2K") == 0)
- mips_cpu = 2000;
- break;
+ ci = mips_cpu_info_from_name (arg);
+ if (ci == NULL || ci->is_isa)
+ as_bad (_("invalid architecture -mcpu=%s"), arg);
+ else
+ mips_cpu = ci->cpu;
+ }
+ }
+ break;
- case '3':
- if (strcmp (p, "3000") == 0
- || strcmp (p, "3k") == 0
- || strcmp (p, "3K") == 0)
- mips_cpu = 3000;
- break;
+ case OPTION_M4650:
+ mips_cpu = CPU_R4650;
+ break;
- case '4':
- if (strcmp (p, "4000") == 0
- || strcmp (p, "4k") == 0
- || strcmp (p, "4K") == 0)
- mips_cpu = 4000;
- else if (strcmp (p, "4400") == 0)
- mips_cpu = 4400;
- else if (strcmp (p, "4600") == 0)
- mips_cpu = 4600;
- break;
+ case OPTION_NO_M4650:
+ break;
- case '6':
- if (strcmp (p, "6000") == 0
- || strcmp (p, "6k") == 0
- || strcmp (p, "6K") == 0)
- mips_cpu = 6000;
- break;
+ case OPTION_M4010:
+ mips_cpu = CPU_R4010;
+ break;
- case 'o':
- if (strcmp (p, "orion") == 0)
- mips_cpu = 4600;
- break;
- }
+ case OPTION_NO_M4010:
+ break;
- if (mips_cpu == -1)
- {
- as_bad ("invalid architecture -mcpu=%s", arg);
- return 0;
- }
- }
- }
+ case OPTION_M4100:
+ mips_cpu = CPU_VR4100;
+ break;
+
+ case OPTION_NO_M4100:
+ break;
+
+ case OPTION_M3900:
+ mips_cpu = CPU_R3900;
+ break;
+
+ case OPTION_NO_M3900:
+ break;
+
+ case OPTION_MIPS16:
+ mips_opts.mips16 = 1;
+ mips_no_prev_insn (false);
+ break;
+
+ case OPTION_NO_MIPS16:
+ mips_opts.mips16 = 0;
+ mips_no_prev_insn (false);
break;
case OPTION_MEMBEDDED_PIC:
mips_pic = EMBEDDED_PIC;
-#ifdef GPOPT
- if (g_switch_seen)
+ if (USE_GLOBAL_POINTER_OPT && g_switch_seen)
{
- as_bad ("-G may not be used with embedded PIC code");
+ as_bad (_("-G may not be used with embedded PIC code"));
return 0;
}
g_switch_value = 0x7fffffff;
-#endif
break;
#ifdef OBJ_ELF
- /* When generating ELF code, we permit -KPIC and -call_shared to
- select SVR4_PIC, and -non_shared to select no PIC. This is
- intended to be compatible with Irix 5. */
+ /* When generating ELF code, we permit -KPIC and -call_shared to
+ select SVR4_PIC, and -non_shared to select no PIC. This is
+ intended to be compatible with Irix 5. */
case OPTION_CALL_SHARED:
+ if (OUTPUT_FLAVOR != bfd_target_elf_flavour)
+ {
+ as_bad (_("-call_shared is supported only for ELF format"));
+ return 0;
+ }
mips_pic = SVR4_PIC;
if (g_switch_seen && g_switch_value != 0)
{
- as_bad ("-G may not be used with SVR4 PIC code");
+ as_bad (_("-G may not be used with SVR4 PIC code"));
return 0;
}
g_switch_value = 0;
break;
case OPTION_NON_SHARED:
+ if (OUTPUT_FLAVOR != bfd_target_elf_flavour)
+ {
+ as_bad (_("-non_shared is supported only for ELF format"));
+ return 0;
+ }
mips_pic = NO_PIC;
break;
+
+ /* The -xgot option tells the assembler to use 32 offsets when
+ accessing the got in SVR4_PIC mode. It is for Irix
+ compatibility. */
+ case OPTION_XGOT:
+ mips_big_got = 1;
+ break;
#endif /* OBJ_ELF */
-#ifdef GPOPT
case 'G':
- if (mips_pic == SVR4_PIC || mips_pic == EMBEDDED_PIC)
+ if (! USE_GLOBAL_POINTER_OPT)
{
- as_bad ("-G may not be used with SVR4 or embedded PIC code");
+ as_bad (_("-G is not supported for this configuration"));
+ return 0;
+ }
+ else if (mips_pic == SVR4_PIC || mips_pic == EMBEDDED_PIC)
+ {
+ as_bad (_("-G may not be used with SVR4 or embedded PIC code"));
return 0;
}
else
g_switch_value = atoi (arg);
g_switch_seen = 1;
break;
+
+#ifdef OBJ_ELF
+ /* The -32 and -64 options tell the assembler to output the 32
+ bit or the 64 bit MIPS ELF format. */
+ case OPTION_32:
+ mips_64 = 0;
+ break;
+
+ case OPTION_64:
+ {
+ const char **list, **l;
+
+ list = bfd_target_list ();
+ for (l = list; *l != NULL; l++)
+ if (strcmp (*l, "elf64-bigmips") == 0
+ || strcmp (*l, "elf64-littlemips") == 0)
+ break;
+ if (*l == NULL)
+ as_fatal (_("No compiled in support for 64 bit object file format"));
+ free (list);
+ mips_64 = 1;
+ }
+ break;
+#endif /* OBJ_ELF */
+
+ case OPTION_GP32:
+ mips_gp32 = 1;
+ mips_64 = 0;
+
+ /* We deliberately don't allow "-gp32" to set the MIPS_32BITMODE
+ flag in object files because to do so would make it
+ impossible to link with libraries compiled without "-gp32".
+ This is unnecessarily restrictive.
+
+ We could solve this problem by adding "-gp32" multilibs to
+ gcc, but to set this flag before gcc is built with such
+ multilibs will break too many systems. */
+
+#if 0
+ mips_32bitmode = 1;
+#endif
+ break;
+
+ case OPTION_GP64:
+ mips_gp32 = 0;
+ mips_64 = 1;
+#if 0
+ mips_32bitmode = 0;
#endif
+ break;
+
+ case OPTION_MABI:
+ if (strcmp (arg, "32") == 0
+ || strcmp (arg, "n32") == 0
+ || strcmp (arg, "64") == 0
+ || strcmp (arg, "o64") == 0
+ || strcmp (arg, "eabi") == 0)
+ mips_abi_string = arg;
+ break;
+
+ case OPTION_M7000_HILO_FIX:
+ mips_7000_hilo_fix = true;
+ break;
+
+ case OPTION_NO_M7000_HILO_FIX:
+ mips_7000_hilo_fix = false;
+ break;
default:
return 0;
return 1;
}
+static void
+show (stream, string, col_p, first_p)
+ FILE *stream;
+ char *string;
+ int *col_p;
+ int *first_p;
+{
+ if (*first_p)
+ {
+ fprintf (stream, "%24s", "");
+ *col_p = 24;
+ }
+ else
+ {
+ fprintf (stream, ", ");
+ *col_p += 2;
+ }
+
+ if (*col_p + strlen (string) > 72)
+ {
+ fprintf (stream, "\n%24s", "");
+ *col_p = 24;
+ }
+
+ fprintf (stream, "%s", string);
+ *col_p += strlen (string);
+
+ *first_p = 0;
+}
+
void
md_show_usage (stream)
FILE *stream;
{
- fprintf(stream, "\
+ int column, first;
+
+ fprintf (stream, _("\
MIPS options:\n\
-membedded-pic generate embedded position independent code\n\
-EB generate big endian output\n\
-EL generate little endian output\n\
-g, -g2 do not remove uneeded NOPs or swap branches\n\
-G NUM allow referencing objects up to NUM bytes\n\
- implicitly with the gp register [default 8]\n");
- fprintf(stream, "\
--mips1, -mcpu=r{2,3}000 generate code for r2000 and r3000\n\
--mips2, -mcpu=r6000 generate code for r6000\n\
--mips3, -mcpu=r4000 generate code for r4000\n\
+ implicitly with the gp register [default 8]\n"));
+ fprintf (stream, _("\
+-mips1 generate MIPS ISA I instructions\n\
+-mips2 generate MIPS ISA II instructions\n\
+-mips3 generate MIPS ISA III instructions\n\
+-mips4 generate MIPS ISA IV instructions\n\
+-mips5 generate MIPS ISA V instructions\n\
+-mips32 generate MIPS32 ISA instructions\n\
+-mips64 generate MIPS64 ISA instructions\n\
+-mcpu=CPU generate code for CPU, where CPU is one of:\n"));
+
+ first = 1;
+
+ show (stream, "2000", &column, &first);
+ show (stream, "3000", &column, &first);
+ show (stream, "3900", &column, &first);
+ show (stream, "4000", &column, &first);
+ show (stream, "4010", &column, &first);
+ show (stream, "4100", &column, &first);
+ show (stream, "4111", &column, &first);
+ show (stream, "4300", &column, &first);
+ show (stream, "4400", &column, &first);
+ show (stream, "4600", &column, &first);
+ show (stream, "4650", &column, &first);
+ show (stream, "5000", &column, &first);
+ show (stream, "6000", &column, &first);
+ show (stream, "8000", &column, &first);
+ show (stream, "10000", &column, &first);
+ show (stream, "mips32-4k", &column, &first);
+ show (stream, "sb-1", &column, &first);
+ fputc ('\n', stream);
+
+ fprintf (stream, _("\
+-mCPU equivalent to -mcpu=CPU.\n\
+-no-mCPU don't generate code specific to CPU.\n\
+ For -mCPU and -no-mCPU, CPU must be one of:\n"));
+
+ first = 1;
+
+ show (stream, "3900", &column, &first);
+ show (stream, "4010", &column, &first);
+ show (stream, "4100", &column, &first);
+ show (stream, "4650", &column, &first);
+ fputc ('\n', stream);
+
+ fprintf (stream, _("\
+-mips16 generate mips16 instructions\n\
+-no-mips16 do not generate mips16 instructions\n"));
+ fprintf (stream, _("\
-O0 remove unneeded NOPs, do not swap branches\n\
-O remove unneeded NOPs and swap branches\n\
+--[no-]construct-floats [dis]allow floating point values to be constructed\n\
--trap, --no-break trap exception on div by 0 and mult overflow\n\
---break, --no-trap break exception on div by 0 and mult overflow\n");
+--break, --no-trap break exception on div by 0 and mult overflow\n"));
#ifdef OBJ_ELF
- fprintf(stream, "\
+ fprintf (stream, _("\
-KPIC, -call_shared generate SVR4 position independent code\n\
--non_shared do not generate position independent code\n");
+-non_shared do not generate position independent code\n\
+-xgot assume a 32 bit GOT\n\
+-32 create 32 bit object file (default)\n\
+-64 create 64 bit object file\n"));
#endif
}
\f
+void
+mips_init_after_args ()
+{
+ /* initialize opcodes */
+ bfd_mips_num_opcodes = bfd_mips_num_builtin_opcodes;
+ mips_opcodes = (struct mips_opcode *) mips_builtin_opcodes;
+}
+
long
md_pcrel_from (fixP)
fixS *fixP;
{
-#ifndef OBJ_AOUT
- if (fixP->fx_addsy != (symbolS *) NULL
+ if (OUTPUT_FLAVOR != bfd_target_aout_flavour
+ && fixP->fx_addsy != (symbolS *) NULL
&& ! S_IS_DEFINED (fixP->fx_addsy))
{
/* This makes a branch to an undefined symbol be a branch to the
current location. */
return 4;
}
-#endif
/* return the address of the delay slot */
return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
void
cons_fix_new_mips (frag, where, nbytes, exp)
- fragS *frag;
+ fragS *frag ATTRIBUTE_UNUSED;
int where;
unsigned int nbytes;
expressionS *exp;
{
+#ifndef OBJ_ELF
/* If we are assembling in 32 bit mode, turn an 8 byte reloc into a
- 4 byte reloc.
- FIXME: There is no way to select anything but 32 bit mode right
- now. */
- if (nbytes == 8)
+ 4 byte reloc. */
+ if (nbytes == 8 && ! mips_64)
{
- if (byte_order == BIG_ENDIAN)
+ if (target_big_endian)
where += 4;
nbytes = 4;
}
+#endif
- if (nbytes != 2 && nbytes != 4)
- as_bad ("Unsupported reloc size %d", nbytes);
+ if (nbytes != 2 && nbytes != 4 && nbytes != 8)
+ as_bad (_("Unsupported reloc size %d"), nbytes);
fix_new_exp (frag_now, where, (int) nbytes, exp, 0,
- nbytes == 2 ? BFD_RELOC_16 : BFD_RELOC_32);
+ (nbytes == 2
+ ? BFD_RELOC_16
+ : (nbytes == 4 ? BFD_RELOC_32 : BFD_RELOC_64)));
+}
+
+/* This is called before the symbol table is processed. In order to
+ work with gcc when using mips-tfile, we must keep all local labels.
+ However, in other cases, we want to discard them. If we were
+ called with -g, but we didn't see any debugging information, it may
+ mean that gcc is smuggling debugging information through to
+ mips-tfile, in which case we must generate all local labels. */
+
+void
+mips_frob_file_before_adjust ()
+{
+#ifndef NO_ECOFF_DEBUGGING
+ if (ECOFF_DEBUGGING
+ && mips_debug != 0
+ && ! ecoff_debugging_seen)
+ flag_keep_locals = 1;
+#endif
+}
+
+/* Sort any unmatched HI16_S relocs so that they immediately precede
+ the corresponding LO reloc. This is called before md_apply_fix and
+ tc_gen_reloc. Unmatched HI16_S relocs can only be generated by
+ explicit use of the %hi modifier. */
+
+void
+mips_frob_file ()
+{
+ struct mips_hi_fixup *l;
+
+ for (l = mips_hi_fixup_list; l != NULL; l = l->next)
+ {
+ segment_info_type *seginfo;
+ int pass;
+
+ assert (l->fixp->fx_r_type == BFD_RELOC_HI16_S);
+
+ /* Check quickly whether the next fixup happens to be a matching
+ %lo. */
+ if (l->fixp->fx_next != NULL
+ && l->fixp->fx_next->fx_r_type == BFD_RELOC_LO16
+ && l->fixp->fx_addsy == l->fixp->fx_next->fx_addsy
+ && l->fixp->fx_offset == l->fixp->fx_next->fx_offset)
+ continue;
+
+ /* Look through the fixups for this segment for a matching %lo.
+ When we find one, move the %hi just in front of it. We do
+ this in two passes. In the first pass, we try to find a
+ unique %lo. In the second pass, we permit multiple %hi
+ relocs for a single %lo (this is a GNU extension). */
+ seginfo = seg_info (l->seg);
+ for (pass = 0; pass < 2; pass++)
+ {
+ fixS *f, *prev;
+
+ prev = NULL;
+ for (f = seginfo->fix_root; f != NULL; f = f->fx_next)
+ {
+ /* Check whether this is a %lo fixup which matches l->fixp. */
+ if (f->fx_r_type == BFD_RELOC_LO16
+ && f->fx_addsy == l->fixp->fx_addsy
+ && f->fx_offset == l->fixp->fx_offset
+ && (pass == 1
+ || prev == NULL
+ || prev->fx_r_type != BFD_RELOC_HI16_S
+ || prev->fx_addsy != f->fx_addsy
+ || prev->fx_offset != f->fx_offset))
+ {
+ fixS **pf;
+
+ /* Move l->fixp before f. */
+ for (pf = &seginfo->fix_root;
+ *pf != l->fixp;
+ pf = &(*pf)->fx_next)
+ assert (*pf != NULL);
+
+ *pf = l->fixp->fx_next;
+
+ l->fixp->fx_next = f;
+ if (prev == NULL)
+ seginfo->fix_root = l->fixp;
+ else
+ prev->fx_next = l->fixp;
+
+ break;
+ }
+
+ prev = f;
+ }
+
+ if (f != NULL)
+ break;
+
+#if 0 /* GCC code motion plus incomplete dead code elimination
+ can leave a %hi without a %lo. */
+ if (pass == 1)
+ as_warn_where (l->fixp->fx_file, l->fixp->fx_line,
+ _("Unmatched %%hi reloc"));
+#endif
+ }
+ }
}
/* When generating embedded PIC code we need to use a special
fixup requires the special reloc. */
#define SWITCH_TABLE(fixp) \
((fixp)->fx_r_type == BFD_RELOC_32 \
+ && OUTPUT_FLAVOR != bfd_target_elf_flavour \
&& (fixp)->fx_addsy != NULL \
&& (fixp)->fx_subsy != NULL \
&& S_GET_SEGMENT ((fixp)->fx_addsy) == text_section \
relocations, in case the linker has to relax a call. We also need
to keep relocations for switch table entries. */
-/*ARGSUSED*/
int
mips_force_relocation (fixp)
fixS *fixp;
{
+ if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ return 1;
+
return (mips_pic == EMBEDDED_PIC
&& (fixp->fx_pcrel
|| SWITCH_TABLE (fixp)
unsigned char *buf;
long insn, value;
- assert (fixP->fx_size == 4);
+ assert (fixP->fx_size == 4
+ || fixP->fx_r_type == BFD_RELOC_16
+ || fixP->fx_r_type == BFD_RELOC_64
+ || fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY);
value = *valueP;
+
+ /* If we aren't adjusting this fixup to be against the section
+ symbol, we need to adjust the value. */
+#ifdef OBJ_ELF
+ if (fixP->fx_addsy != NULL && OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ {
+ if (S_GET_OTHER (fixP->fx_addsy) == STO_MIPS16
+ || S_IS_WEAK (fixP->fx_addsy)
+ || (symbol_used_in_reloc_p (fixP->fx_addsy)
+ && (((bfd_get_section_flags (stdoutput,
+ S_GET_SEGMENT (fixP->fx_addsy))
+ & SEC_LINK_ONCE) != 0)
+ || !strncmp (segment_name (S_GET_SEGMENT (fixP->fx_addsy)),
+ ".gnu.linkonce",
+ sizeof (".gnu.linkonce") - 1))))
+
+ {
+ value -= S_GET_VALUE (fixP->fx_addsy);
+ if (value != 0 && ! fixP->fx_pcrel)
+ {
+ /* In this case, the bfd_install_relocation routine will
+ incorrectly add the symbol value back in. We just want
+ the addend to appear in the object file.
+ FIXME: If this makes VALUE zero, we're toast. */
+ value -= S_GET_VALUE (fixP->fx_addsy);
+ }
+ }
+
+ /* This code was generated using trial and error and so is
+ fragile and not trustworthy. If you change it, you should
+ rerun the elf-rel, elf-rel2, and empic testcases and ensure
+ they still pass. */
+ if (fixP->fx_pcrel || fixP->fx_subsy != NULL)
+ {
+ value += fixP->fx_frag->fr_address + fixP->fx_where;
+
+ /* BFD's REL handling, for MIPS, is _very_ weird.
+ This gives the right results, but it can't possibly
+ be the way things are supposed to work. */
+ if (fixP->fx_r_type != BFD_RELOC_16_PCREL_S2
+ || S_GET_SEGMENT (fixP->fx_addsy) != undefined_section)
+ value += fixP->fx_frag->fr_address + fixP->fx_where;
+ }
+ }
+#endif
+
fixP->fx_addnumber = value; /* Remember value for tc_gen_reloc */
if (fixP->fx_addsy == NULL && ! fixP->fx_pcrel)
case BFD_RELOC_MIPS_CALL16:
case BFD_RELOC_MIPS_GOT16:
case BFD_RELOC_MIPS_GPREL32:
+ case BFD_RELOC_MIPS_GOT_HI16:
+ case BFD_RELOC_MIPS_GOT_LO16:
+ case BFD_RELOC_MIPS_CALL_HI16:
+ case BFD_RELOC_MIPS_CALL_LO16:
+ case BFD_RELOC_MIPS16_GPREL:
if (fixP->fx_pcrel)
as_bad_where (fixP->fx_file, fixP->fx_line,
- "Invalid PC relative reloc");
+ _("Invalid PC relative reloc"));
/* Nothing needed to do. The value comes from the reloc entry */
break;
+ case BFD_RELOC_MIPS16_JMP:
+ /* We currently always generate a reloc against a symbol, which
+ means that we don't want an addend even if the symbol is
+ defined. */
+ fixP->fx_addnumber = 0;
+ break;
+
case BFD_RELOC_PCREL_HI16_S:
/* The addend for this is tricky if it is internal, so we just
- do everything here rather than in bfd_perform_relocation. */
- if ((fixP->fx_addsy->bsym->flags & BSF_SECTION_SYM) == 0)
+ do everything here rather than in bfd_install_relocation. */
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour
+ && !fixP->fx_done
+ && value != 0)
+ break;
+ if (fixP->fx_addsy
+ && (symbol_get_bfdsym (fixP->fx_addsy)->flags & BSF_SECTION_SYM) == 0)
{
/* For an external symbol adjust by the address to make it
pcrel_offset. We use the address of the RELLO reloc
value += 0x10000;
value >>= 16;
buf = (unsigned char *) fixP->fx_frag->fr_literal + fixP->fx_where;
- if (byte_order == BIG_ENDIAN)
+ if (target_big_endian)
buf += 2;
md_number_to_chars (buf, value, 2);
break;
case BFD_RELOC_PCREL_LO16:
/* The addend for this is tricky if it is internal, so we just
- do everything here rather than in bfd_perform_relocation. */
- if ((fixP->fx_addsy->bsym->flags & BSF_SECTION_SYM) == 0)
+ do everything here rather than in bfd_install_relocation. */
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour
+ && !fixP->fx_done
+ && value != 0)
+ break;
+ if (fixP->fx_addsy
+ && (symbol_get_bfdsym (fixP->fx_addsy)->flags & BSF_SECTION_SYM) == 0)
value += fixP->fx_frag->fr_address + fixP->fx_where;
buf = (unsigned char *) fixP->fx_frag->fr_literal + fixP->fx_where;
- if (byte_order == BIG_ENDIAN)
+ if (target_big_endian)
buf += 2;
md_number_to_chars (buf, value, 2);
break;
+ case BFD_RELOC_64:
+ /* This is handled like BFD_RELOC_32, but we output a sign
+ extended value if we are only 32 bits. */
+ if (fixP->fx_done
+ || (mips_pic == EMBEDDED_PIC && SWITCH_TABLE (fixP)))
+ {
+ if (8 <= sizeof (valueT))
+ md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where,
+ value, 8);
+ else
+ {
+ long w1, w2;
+ long hiv;
+
+ w1 = w2 = fixP->fx_where;
+ if (target_big_endian)
+ w1 += 4;
+ else
+ w2 += 4;
+ md_number_to_chars (fixP->fx_frag->fr_literal + w1, value, 4);
+ if ((value & 0x80000000) != 0)
+ hiv = 0xffffffff;
+ else
+ hiv = 0;
+ md_number_to_chars (fixP->fx_frag->fr_literal + w2, hiv, 4);
+ }
+ }
+ break;
+
+ case BFD_RELOC_RVA:
case BFD_RELOC_32:
/* If we are deleting this reloc entry, we must fill in the
value now. This can happen if we have a .word which is not
value, 4);
break;
+ case BFD_RELOC_16:
+ /* If we are deleting this reloc entry, we must fill in the
+ value now. */
+ assert (fixP->fx_size == 2);
+ if (fixP->fx_done)
+ md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where,
+ value, 2);
+ break;
+
case BFD_RELOC_LO16:
/* When handling an embedded PIC switch statement, we can wind
up deleting a LO16 reloc. See the 'o' case in mips_ip. */
{
if (value < -0x8000 || value > 0x7fff)
as_bad_where (fixP->fx_file, fixP->fx_line,
- "relocation overflow");
+ _("relocation overflow"));
buf = (unsigned char *) fixP->fx_frag->fr_literal + fixP->fx_where;
- if (byte_order == BIG_ENDIAN)
+ if (target_big_endian)
buf += 2;
md_number_to_chars (buf, value, 2);
}
* might be deleting the relocation entry (i.e., a branch within
* the current segment).
*/
- if (value & 0x3)
- as_warn_where (fixP->fx_file, fixP->fx_line,
- "Branch to odd address (%lx)", value);
+ if ((value & 0x3) != 0)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("Branch to odd address (%lx)"), value);
+
+ if (!fixP->fx_done && value != 0)
+ break;
+ /* If 'value' is zero, the remaining reloc code won't actually
+ do the store, so it must be done here. This is probably
+ a bug somewhere. */
+ if (!fixP->fx_done)
+ value -= fixP->fx_frag->fr_address + fixP->fx_where;
+
value >>= 2;
/* update old instruction data */
buf = (unsigned char *) (fixP->fx_where + fixP->fx_frag->fr_literal);
- switch (byte_order)
- {
- case LITTLE_ENDIAN:
- insn = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
- break;
-
- case BIG_ENDIAN:
- insn = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
- break;
-
- default:
- internalError ();
- return 0;
- }
+ if (target_big_endian)
+ insn = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
+ else
+ insn = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
if (value >= -0x8000 && value < 0x8000)
insn |= value & 0xffff;
handle these cases, but it appears to do it
incorrectly. */
as_bad_where (fixP->fx_file, fixP->fx_line,
- "Relocation overflow");
+ _("Branch out of range"));
}
}
md_number_to_chars ((char *) buf, (valueT) insn, 4);
break;
+ case BFD_RELOC_VTABLE_INHERIT:
+ fixP->fx_done = 0;
+ if (fixP->fx_addsy
+ && !S_IS_DEFINED (fixP->fx_addsy)
+ && !S_IS_WEAK (fixP->fx_addsy))
+ S_SET_WEAK (fixP->fx_addsy);
+ break;
+
+ case BFD_RELOC_VTABLE_ENTRY:
+ fixP->fx_done = 0;
+ break;
+
default:
internalError ();
}
return;
}
}
- printf ("%08lx UNDEFINED\n", oc);
+ printf (_("%08lx UNDEFINED\n"), oc);
}
#endif
int fill;
symbolS *label;
{
- mips_emit_delays ();
- frag_align (to, fill);
+ mips_emit_delays (false);
+ frag_align (to, fill, 0);
record_alignment (now_seg, to);
if (label != NULL)
{
assert (S_GET_SEGMENT (label) == now_seg);
- label->sy_frag = frag_now;
+ symbol_set_frag (label, frag_now);
S_SET_VALUE (label, (valueT) frag_now_fix ());
}
}
static void
s_align (x)
- int x;
+ int x ATTRIBUTE_UNUSED;
{
register int temp;
register long temp_fill;
temp = get_absolute_expression ();
if (temp > max_alignment)
- as_bad ("Alignment too large: %d. assumed.", temp = max_alignment);
+ as_bad (_("Alignment too large: %d. assumed."), temp = max_alignment);
else if (temp < 0)
{
- as_warn ("Alignment negative: 0 assumed.");
+ as_warn (_("Alignment negative: 0 assumed."));
temp = 0;
}
if (*input_line_pointer == ',')
if (temp)
{
auto_align = 1;
- mips_align (temp, (int) temp_fill, insn_label);
+ mips_align (temp, (int) temp_fill,
+ insn_labels != NULL ? insn_labels->label : NULL);
}
else
{
demand_empty_rest_of_line ();
}
-/* Handle .ascii and .asciiz. This just calls stringer and forgets
- that there was a previous instruction. */
-
-static void
-s_stringer (append_zero)
- int append_zero;
+void
+mips_flush_pending_output ()
{
- mips_emit_delays ();
- insn_label = NULL;
- stringer (append_zero);
+ mips_emit_delays (false);
+ mips_clear_insn_labels ();
}
static void
s_change_sec (sec)
int sec;
{
-#ifdef GPOPT
segT seg;
-#endif
/* When generating embedded PIC code, we only use the .text, .lit8,
.sdata and .sbss sections. We change the .data and .rdata
&& (sec == 'd' || sec == 'r'))
sec = 's';
- mips_emit_delays ();
+#ifdef OBJ_ELF
+ /* The ELF backend needs to know that we are changing sections, so
+ that .previous works correctly. We could do something like check
+ for a obj_section_change_hook macro, but that might be confusing
+ as it would not be appropriate to use it in the section changing
+ functions in read.c, since obj-elf.c intercepts those. FIXME:
+ This should be cleaner, somehow. */
+ obj_elf_section_change_hook ();
+#endif
+
+ mips_emit_delays (false);
switch (sec)
{
case 't':
break;
case 'r':
-#ifdef GPOPT
- seg = subseg_new (RDATA_SECTION_NAME,
- (subsegT) get_absolute_expression ());
-#ifdef OBJ_ELF
- bfd_set_section_flags (stdoutput, seg,
- (SEC_ALLOC
- | SEC_LOAD
- | SEC_READONLY
- | SEC_RELOC
- | SEC_DATA));
- bfd_set_section_alignment (stdoutput, seg, 4);
-#endif
- demand_empty_rest_of_line ();
-#else /* ! defined (GPOPT) */
- as_bad ("No read only data section in this object file format");
- demand_empty_rest_of_line ();
- return;
-#endif /* ! defined (GPOPT) */
+ if (USE_GLOBAL_POINTER_OPT)
+ {
+ seg = subseg_new (RDATA_SECTION_NAME,
+ (subsegT) get_absolute_expression ());
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ {
+ bfd_set_section_flags (stdoutput, seg,
+ (SEC_ALLOC
+ | SEC_LOAD
+ | SEC_READONLY
+ | SEC_RELOC
+ | SEC_DATA));
+ if (strcmp (TARGET_OS, "elf") != 0)
+ record_alignment (seg, 4);
+ }
+ demand_empty_rest_of_line ();
+ }
+ else
+ {
+ as_bad (_("No read only data section in this object file format"));
+ demand_empty_rest_of_line ();
+ return;
+ }
break;
case 's':
-#ifdef GPOPT
- seg = subseg_new (".sdata", (subsegT) get_absolute_expression ());
-#ifdef OBJ_ELF
- bfd_set_section_flags (stdoutput, seg,
- SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_DATA);
- bfd_set_section_alignment (stdoutput, seg, 4);
-#endif
- demand_empty_rest_of_line ();
- break;
-#else /* ! defined (GPOPT) */
- as_bad ("Global pointers not supported; recompile -G 0");
- demand_empty_rest_of_line ();
- return;
-#endif /* ! defined (GPOPT) */
+ if (USE_GLOBAL_POINTER_OPT)
+ {
+ seg = subseg_new (".sdata", (subsegT) get_absolute_expression ());
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ {
+ bfd_set_section_flags (stdoutput, seg,
+ SEC_ALLOC | SEC_LOAD | SEC_RELOC
+ | SEC_DATA);
+ if (strcmp (TARGET_OS, "elf") != 0)
+ record_alignment (seg, 4);
+ }
+ demand_empty_rest_of_line ();
+ break;
+ }
+ else
+ {
+ as_bad (_("Global pointers not supported; recompile -G 0"));
+ demand_empty_rest_of_line ();
+ return;
+ }
}
auto_align = 1;
}
-#ifdef OBJ_ELF
-
-/* Handle the ELF .section pseudo-op. This is a wrapper around
- obj_elf_section. */
-
-static void
-s_elf_section (x)
- int x;
+void
+mips_enable_auto_align ()
{
- mips_emit_delays ();
- obj_elf_section (x);
auto_align = 1;
}
-#endif /* OBJ_ELF */
-
static void
s_cons (log_size)
int log_size;
{
symbolS *label;
- label = insn_label;
- mips_emit_delays ();
+ label = insn_labels != NULL ? insn_labels->label : NULL;
+ mips_emit_delays (false);
if (log_size > 0 && auto_align)
mips_align (log_size, 0, label);
- insn_label = NULL;
+ mips_clear_insn_labels ();
cons (1 << log_size);
}
-static void
-s_err (x)
- int x;
-{
- as_fatal ("Encountered `.err', aborting assembly");
-}
-
-static void
-s_extern (x)
- int x;
-{
- valueT size;
- symbolS *symbolP;
-
- symbolP = get_symbol ();
- if (*input_line_pointer == ',')
- input_line_pointer++;
- size = get_absolute_expression ();
- S_SET_EXTERNAL (symbolP);
-
-#ifdef ECOFF_DEBUGGING
- symbolP->ecoff_extern_size = size;
-#endif
-}
-
static void
s_float_cons (type)
int type;
{
symbolS *label;
- label = insn_label;
+ label = insn_labels != NULL ? insn_labels->label : NULL;
- mips_emit_delays ();
+ mips_emit_delays (false);
if (auto_align)
- if (type == 'd')
- mips_align (3, 0, label);
- else
- mips_align (2, 0, label);
+ {
+ if (type == 'd')
+ mips_align (3, 0, label);
+ else
+ mips_align (2, 0, label);
+ }
- insn_label = NULL;
+ mips_clear_insn_labels ();
float_cons (type);
}
static void
s_mips_globl (x)
- int x;
+ int x ATTRIBUTE_UNUSED;
{
char *name;
int c;
symbolS *symbolP;
+ flagword flag;
name = input_line_pointer;
c = get_symbol_end ();
symbolP = symbol_find_or_make (name);
*input_line_pointer = c;
SKIP_WHITESPACE ();
+
+ /* On Irix 5, every global symbol that is not explicitly labelled as
+ being a function is apparently labelled as being an object. */
+ flag = BSF_OBJECT;
+
if (! is_end_of_line[(unsigned char) *input_line_pointer])
{
char *secname;
c = get_symbol_end ();
sec = bfd_get_section_by_name (stdoutput, secname);
if (sec == NULL)
- as_bad ("%s: no such section", secname);
+ as_bad (_("%s: no such section"), secname);
*input_line_pointer = c;
if (sec != NULL && (sec->flags & SEC_CODE) != 0)
- symbolP->bsym->flags |= BSF_FUNCTION;
+ flag = BSF_FUNCTION;
}
+ symbol_get_bfdsym (symbolP)->flags |= flag;
+
S_SET_EXTERNAL (symbolP);
demand_empty_rest_of_line ();
}
static void
s_option (x)
- int x;
+ int x ATTRIBUTE_UNUSED;
{
char *opt;
char c;
else if (i == 2)
mips_pic = SVR4_PIC;
else
- as_bad (".option pic%d not supported", i);
+ as_bad (_(".option pic%d not supported"), i);
-#ifdef GPOPT
- if (mips_pic == SVR4_PIC)
+ if (USE_GLOBAL_POINTER_OPT && mips_pic == SVR4_PIC)
{
if (g_switch_seen && g_switch_value != 0)
- as_warn ("-G may not be used with SVR4 PIC code");
+ as_warn (_("-G may not be used with SVR4 PIC code"));
g_switch_value = 0;
bfd_set_gp_size (stdoutput, 0);
}
-#endif
}
else
- as_warn ("Unrecognized option \"%s\"", opt);
+ as_warn (_("Unrecognized option \"%s\""), opt);
*input_line_pointer = c;
demand_empty_rest_of_line ();
}
+/* This structure is used to hold a stack of .set values. */
+
+struct mips_option_stack
+{
+ struct mips_option_stack *next;
+ struct mips_set_options options;
+};
+
+static struct mips_option_stack *mips_opts_stack;
+
+/* Handle the .set pseudo-op. */
+
static void
s_mipsset (x)
- int x;
+ int x ATTRIBUTE_UNUSED;
{
char *name = input_line_pointer, ch;
if (strcmp (name, "reorder") == 0)
{
- if (mips_noreorder)
+ if (mips_opts.noreorder && prev_nop_frag != NULL)
{
- prev_insn_unreordered = 1;
- prev_prev_insn_unreordered = 1;
+ /* If we still have pending nops, we can discard them. The
+ usual nop handling will insert any that are still
+ needed. */
+ prev_nop_frag->fr_fix -= (prev_nop_frag_holds
+ * (mips_opts.mips16 ? 2 : 4));
+ prev_nop_frag = NULL;
}
- mips_noreorder = 0;
+ mips_opts.noreorder = 0;
}
else if (strcmp (name, "noreorder") == 0)
{
- mips_emit_delays ();
- mips_noreorder = 1;
+ mips_emit_delays (true);
+ mips_opts.noreorder = 1;
mips_any_noreorder = 1;
}
else if (strcmp (name, "at") == 0)
{
- mips_noat = 0;
+ mips_opts.noat = 0;
}
else if (strcmp (name, "noat") == 0)
{
- mips_noat = 1;
+ mips_opts.noat = 1;
}
else if (strcmp (name, "macro") == 0)
{
- mips_warn_about_macros = 0;
+ mips_opts.warn_about_macros = 0;
}
else if (strcmp (name, "nomacro") == 0)
{
- if (mips_noreorder == 0)
- as_bad ("`noreorder' must be set before `nomacro'");
- mips_warn_about_macros = 1;
+ if (mips_opts.noreorder == 0)
+ as_bad (_("`noreorder' must be set before `nomacro'"));
+ mips_opts.warn_about_macros = 1;
}
else if (strcmp (name, "move") == 0 || strcmp (name, "novolatile") == 0)
{
- mips_nomove = 0;
+ mips_opts.nomove = 0;
}
else if (strcmp (name, "nomove") == 0 || strcmp (name, "volatile") == 0)
{
- mips_nomove = 1;
+ mips_opts.nomove = 1;
}
else if (strcmp (name, "bopt") == 0)
{
- mips_nobopt = 0;
+ mips_opts.nobopt = 0;
}
else if (strcmp (name, "nobopt") == 0)
{
- mips_nobopt = 1;
+ mips_opts.nobopt = 1;
}
+ else if (strcmp (name, "mips16") == 0
+ || strcmp (name, "MIPS-16") == 0)
+ mips_opts.mips16 = 1;
+ else if (strcmp (name, "nomips16") == 0
+ || strcmp (name, "noMIPS-16") == 0)
+ mips_opts.mips16 = 0;
else if (strncmp (name, "mips", 4) == 0)
{
int isa;
/* Permit the user to change the ISA on the fly. Needless to
say, misuse can cause serious problems. */
isa = atoi (name + 4);
- if (isa == 0)
- mips_isa = file_mips_isa;
- else if (isa < 1 || isa > 3)
- as_bad ("unknown ISA level");
+ switch (isa)
+ {
+ case 0: mips_opts.isa = file_mips_isa; break;
+ case 1: mips_opts.isa = ISA_MIPS1; break;
+ case 2: mips_opts.isa = ISA_MIPS2; break;
+ case 3: mips_opts.isa = ISA_MIPS3; break;
+ case 5: mips_opts.isa = ISA_MIPS5; break;
+ case 4: mips_opts.isa = ISA_MIPS4; break;
+ case 32: mips_opts.isa = ISA_MIPS32; break;
+ case 64: mips_opts.isa = ISA_MIPS64; break;
+ default: as_bad (_("unknown ISA level")); break;
+ }
+ }
+ else if (strcmp (name, "autoextend") == 0)
+ mips_opts.noautoextend = 0;
+ else if (strcmp (name, "noautoextend") == 0)
+ mips_opts.noautoextend = 1;
+ else if (strcmp (name, "push") == 0)
+ {
+ struct mips_option_stack *s;
+
+ s = (struct mips_option_stack *) xmalloc (sizeof *s);
+ s->next = mips_opts_stack;
+ s->options = mips_opts;
+ mips_opts_stack = s;
+ }
+ else if (strcmp (name, "pop") == 0)
+ {
+ struct mips_option_stack *s;
+
+ s = mips_opts_stack;
+ if (s == NULL)
+ as_bad (_(".set pop with no .set push"));
else
- mips_isa = isa;
+ {
+ /* If we're changing the reorder mode we need to handle
+ delay slots correctly. */
+ if (s->options.noreorder && ! mips_opts.noreorder)
+ mips_emit_delays (true);
+ else if (! s->options.noreorder && mips_opts.noreorder)
+ {
+ if (prev_nop_frag != NULL)
+ {
+ prev_nop_frag->fr_fix -= (prev_nop_frag_holds
+ * (mips_opts.mips16 ? 2 : 4));
+ prev_nop_frag = NULL;
+ }
+ }
+
+ mips_opts = s->options;
+ mips_opts_stack = s->next;
+ free (s);
+ }
}
else
{
- as_warn ("Tried to set unrecognized symbol: %s\n", name);
+ as_warn (_("Tried to set unrecognized symbol: %s\n"), name);
}
*input_line_pointer = ch;
demand_empty_rest_of_line ();
}
-/* The same as the usual .space directive, except that we have to
- forget about any previous instruction. */
-
-static void
-s_mips_space (param)
- int param;
-{
- mips_emit_delays ();
- insn_label = NULL;
- s_space (param);
-}
-
/* Handle the .abicalls pseudo-op. I believe this is equivalent to
.option pic2. It means to generate SVR4 PIC calls. */
static void
s_abicalls (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
mips_pic = SVR4_PIC;
-#ifdef GPOPT
- if (g_switch_seen && g_switch_value != 0)
- as_warn ("-G may not be used with SVR4 PIC code");
- g_switch_value = 0;
-#endif
+ if (USE_GLOBAL_POINTER_OPT)
+ {
+ if (g_switch_seen && g_switch_value != 0)
+ as_warn (_("-G may not be used with SVR4 PIC code"));
+ g_switch_value = 0;
+ }
bfd_set_gp_size (stdoutput, 0);
demand_empty_rest_of_line ();
}
static void
s_cpload (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
expressionS ex;
int icnt = 0;
}
/* .cpload should be a in .set noreorder section. */
- if (mips_noreorder == 0)
- as_warn (".cpload not in noreorder section");
+ if (mips_opts.noreorder == 0)
+ as_warn (_(".cpload not in noreorder section"));
ex.X_op = O_symbol;
ex.X_add_symbol = symbol_find_or_make ("_gp_disp");
ex.X_op_symbol = NULL;
ex.X_add_number = 0;
+ /* In ELF, this symbol is implicitly an STT_OBJECT symbol. */
+ symbol_get_bfdsym (ex.X_add_symbol)->flags |= BSF_OBJECT;
+
macro_build_lui ((char *) NULL, &icnt, &ex, GP);
macro_build ((char *) NULL, &icnt, &ex, "addiu", "t,r,j", GP, GP,
(int) BFD_RELOC_LO16);
static void
s_cprestore (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
expressionS ex;
int icnt = 0;
ex.X_add_number = mips_cprestore_offset;
macro_build ((char *) NULL, &icnt, &ex,
- mips_isa < 3 ? "sw" : "sd",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "sw" : "sd"),
"t,o(b)", GP, (int) BFD_RELOC_LO16, SP);
demand_empty_rest_of_line ();
static void
s_gpword (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
symbolS *label;
expressionS ex;
return;
}
- label = insn_label;
- mips_emit_delays ();
+ label = insn_labels != NULL ? insn_labels->label : NULL;
+ mips_emit_delays (true);
if (auto_align)
mips_align (2, 0, label);
- insn_label = NULL;
+ mips_clear_insn_labels ();
expression (&ex);
if (ex.X_op != O_symbol || ex.X_add_number != 0)
{
- as_bad ("Unsupported use of .gpword");
+ as_bad (_("Unsupported use of .gpword"));
ignore_rest_of_line ();
}
static void
s_cpadd (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
int icnt = 0;
int reg;
/* Add $gp to the register named as an argument. */
reg = tc_get_register (0);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", reg, reg, GP);
- demand_empty_rest_of_line ();
+ demand_empty_rest_of_line ();
+}
+
+/* Handle the .insn pseudo-op. This marks instruction labels in
+ mips16 mode. This permits the linker to handle them specially,
+ such as generating jalx instructions when needed. We also make
+ them odd for the duration of the assembly, in order to generate the
+ right sort of code. We will make them even in the adjust_symtab
+ routine, while leaving them marked. This is convenient for the
+ debugger and the disassembler. The linker knows to make them odd
+ again. */
+
+static void
+s_insn (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ if (mips_opts.mips16)
+ mips16_mark_labels ();
+
+ demand_empty_rest_of_line ();
+}
+
+/* Handle a .stabn directive. We need these in order to mark a label
+ as being a mips16 text label correctly. Sometimes the compiler
+ will emit a label, followed by a .stabn, and then switch sections.
+ If the label and .stabn are in mips16 mode, then the label is
+ really a mips16 text label. */
+
+static void
+s_mips_stab (type)
+ int type;
+{
+ if (type == 'n' && mips_opts.mips16)
+ mips16_mark_labels ();
+
+ s_stab (type);
+}
+
+/* Handle the .weakext pseudo-op as defined in Kane and Heinrich.
+ */
+
+static void
+s_mips_weakext (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ char *name;
+ int c;
+ symbolS *symbolP;
+ expressionS exp;
+
+ name = input_line_pointer;
+ c = get_symbol_end ();
+ symbolP = symbol_find_or_make (name);
+ S_SET_WEAK (symbolP);
+ *input_line_pointer = c;
+
+ SKIP_WHITESPACE ();
+
+ if (! is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ if (S_IS_DEFINED (symbolP))
+ {
+ as_bad ("Ignoring attempt to redefine symbol `%s'.",
+ S_GET_NAME (symbolP));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ if (*input_line_pointer == ',')
+ {
+ ++input_line_pointer;
+ SKIP_WHITESPACE ();
+ }
+
+ expression (&exp);
+ if (exp.X_op != O_symbol)
+ {
+ as_bad ("bad .weakext directive");
+ ignore_rest_of_line();
+ return;
+ }
+ symbol_set_value_expression (symbolP, &exp);
+ }
+
+ demand_empty_rest_of_line ();
}
/* Parse a register string into a number. Called from the ECOFF code
SKIP_WHITESPACE ();
if (*input_line_pointer++ != '$')
{
- as_warn ("expected `$'");
+ as_warn (_("expected `$'"));
reg = 0;
}
else if (isdigit ((unsigned char) *input_line_pointer))
reg = get_absolute_expression ();
if (reg < 0 || reg >= 32)
{
- as_warn ("Bad register number");
+ as_warn (_("Bad register number"));
reg = 0;
}
}
reg = AT;
else
{
- as_warn ("Unrecognized register name");
+ as_warn (_("Unrecognized register name"));
reg = 0;
}
input_line_pointer += 2;
{
int align = bfd_get_section_alignment (stdoutput, seg);
+#ifdef OBJ_ELF
+ /* We don't need to align ELF sections to the full alignment.
+ However, Irix 5 may prefer that we align them at least to a 16
+ byte boundary. We don't bother to align the sections if we are
+ targeted for an embedded system. */
+ if (strcmp (TARGET_OS, "elf") == 0)
+ return addr;
+ if (align > 4)
+ align = 4;
+#endif
+
return ((addr + (1 << align) - 1) & (-1 << align));
}
-/* Estimate the size of a frag before relaxing. We are not really
- relaxing here, and the final size is encoded in the subtype
- information. */
+/* Utility routine, called from above as well. If called while the
+ input file is still being read, it's only an approximation. (For
+ example, a symbol may later become defined which appeared to be
+ undefined earlier.) */
-/*ARGSUSED*/
-int
-md_estimate_size_before_relax (fragp, segtype)
- fragS *fragp;
- asection *segtype;
+static int
+nopic_need_relax (sym, before_relaxing)
+ symbolS *sym;
+ int before_relaxing;
{
- int change;
+ if (sym == 0)
+ return 0;
- if (mips_pic == NO_PIC)
+ if (USE_GLOBAL_POINTER_OPT)
{
-#ifdef GPOPT
const char *symname;
+ int change;
/* Find out whether this symbol can be referenced off the GP
register. It can be if it is smaller than the -G size or if
it is in the .sdata or .sbss section. Certain symbols can
not be referenced off the GP, although it appears as though
they can. */
- symname = S_GET_NAME (fragp->fr_symbol);
+ symname = S_GET_NAME (sym);
if (symname != (const char *) NULL
&& (strcmp (symname, "eprol") == 0
|| strcmp (symname, "etext") == 0
|| strcmp (symname, "end") == 0
|| strcmp (symname, "_gp_disp") == 0))
change = 1;
- else if (! S_IS_DEFINED (fragp->fr_symbol)
- && ((fragp->fr_symbol->ecoff_extern_size != 0
- && fragp->fr_symbol->ecoff_extern_size <= g_switch_value)
- || (S_GET_VALUE (fragp->fr_symbol) != 0
- && S_GET_VALUE (fragp->fr_symbol) <= g_switch_value)))
+ else if ((! S_IS_DEFINED (sym) || S_IS_COMMON (sym))
+ && (0
+#ifndef NO_ECOFF_DEBUGGING
+ || (symbol_get_obj (sym)->ecoff_extern_size != 0
+ && (symbol_get_obj (sym)->ecoff_extern_size
+ <= g_switch_value))
+#endif
+ /* We must defer this decision until after the whole
+ file has been read, since there might be a .extern
+ after the first use of this symbol. */
+ || (before_relaxing
+#ifndef NO_ECOFF_DEBUGGING
+ && symbol_get_obj (sym)->ecoff_extern_size == 0
+#endif
+ && S_GET_VALUE (sym) == 0)
+ || (S_GET_VALUE (sym) != 0
+ && S_GET_VALUE (sym) <= g_switch_value)))
change = 0;
else
{
const char *segname;
- segname = segment_name (S_GET_SEGMENT (fragp->fr_symbol));
+ segname = segment_name (S_GET_SEGMENT (sym));
assert (strcmp (segname, ".lit8") != 0
&& strcmp (segname, ".lit4") != 0);
change = (strcmp (segname, ".sdata") != 0
- && strcmp (segname, ".sbss") != 0);
+ && strcmp (segname, ".sbss") != 0
+ && strncmp (segname, ".sdata.", 7) != 0
+ && strncmp (segname, ".gnu.linkonce.s.", 16) != 0);
+ }
+ return change;
+ }
+ else
+ /* We are not optimizing for the GP register. */
+ return 1;
+}
+
+/* Given a mips16 variant frag FRAGP, return non-zero if it needs an
+ extended opcode. SEC is the section the frag is in. */
+
+static int
+mips16_extended_frag (fragp, sec, stretch)
+ fragS *fragp;
+ asection *sec;
+ long stretch;
+{
+ int type;
+ register const struct mips16_immed_operand *op;
+ offsetT val;
+ int mintiny, maxtiny;
+ segT symsec;
+
+ if (RELAX_MIPS16_USER_SMALL (fragp->fr_subtype))
+ return 0;
+ if (RELAX_MIPS16_USER_EXT (fragp->fr_subtype))
+ return 1;
+
+ type = RELAX_MIPS16_TYPE (fragp->fr_subtype);
+ op = mips16_immed_operands;
+ while (op->type != type)
+ {
+ ++op;
+ assert (op < mips16_immed_operands + MIPS16_NUM_IMMED);
+ }
+
+ if (op->unsp)
+ {
+ if (type == '<' || type == '>' || type == '[' || type == ']')
+ {
+ mintiny = 1;
+ maxtiny = 1 << op->nbits;
+ }
+ else
+ {
+ mintiny = 0;
+ maxtiny = (1 << op->nbits) - 1;
+ }
+ }
+ else
+ {
+ mintiny = - (1 << (op->nbits - 1));
+ maxtiny = (1 << (op->nbits - 1)) - 1;
+ }
+
+ /* We can't always call S_GET_VALUE here, because we don't want to
+ lock in a particular frag address. */
+ if (symbol_constant_p (fragp->fr_symbol))
+ {
+ val = (S_GET_VALUE (fragp->fr_symbol)
+ + symbol_get_frag (fragp->fr_symbol)->fr_address);
+ symsec = S_GET_SEGMENT (fragp->fr_symbol);
+ }
+ else if (symbol_equated_p (fragp->fr_symbol)
+ && (symbol_constant_p
+ (symbol_get_value_expression (fragp->fr_symbol)->X_add_symbol)))
+ {
+ symbolS *eqsym;
+
+ eqsym = symbol_get_value_expression (fragp->fr_symbol)->X_add_symbol;
+ val = (S_GET_VALUE (eqsym)
+ + symbol_get_frag (eqsym)->fr_address
+ + symbol_get_value_expression (fragp->fr_symbol)->X_add_number
+ + symbol_get_frag (fragp->fr_symbol)->fr_address);
+ symsec = S_GET_SEGMENT (eqsym);
+ }
+ else
+ return 1;
+
+ if (op->pcrel)
+ {
+ addressT addr;
+
+ /* We won't have the section when we are called from
+ mips_relax_frag. However, we will always have been called
+ from md_estimate_size_before_relax first. If this is a
+ branch to a different section, we mark it as such. If SEC is
+ NULL, and the frag is not marked, then it must be a branch to
+ the same section. */
+ if (sec == NULL)
+ {
+ if (RELAX_MIPS16_LONG_BRANCH (fragp->fr_subtype))
+ return 1;
+ }
+ else
+ {
+ if (symsec != sec)
+ {
+ fragp->fr_subtype =
+ RELAX_MIPS16_MARK_LONG_BRANCH (fragp->fr_subtype);
+
+ /* FIXME: We should support this, and let the linker
+ catch branches and loads that are out of range. */
+ as_bad_where (fragp->fr_file, fragp->fr_line,
+ _("unsupported PC relative reference to different section"));
+
+ return 1;
+ }
+ }
+
+ /* In this case, we know for sure that the symbol fragment is in
+ the same section. If the fr_address of the symbol fragment
+ is greater then the address of this fragment we want to add
+ in STRETCH in order to get a better estimate of the address.
+ This particularly matters because of the shift bits. */
+ if (stretch != 0
+ && (symbol_get_frag (fragp->fr_symbol)->fr_address
+ >= fragp->fr_address))
+ {
+ fragS *f;
+
+ /* Adjust stretch for any alignment frag. Note that if have
+ been expanding the earlier code, the symbol may be
+ defined in what appears to be an earlier frag. FIXME:
+ This doesn't handle the fr_subtype field, which specifies
+ a maximum number of bytes to skip when doing an
+ alignment. */
+ for (f = fragp;
+ f != NULL && f != symbol_get_frag (fragp->fr_symbol);
+ f = f->fr_next)
+ {
+ if (f->fr_type == rs_align || f->fr_type == rs_align_code)
+ {
+ if (stretch < 0)
+ stretch = - ((- stretch)
+ & ~ ((1 << (int) f->fr_offset) - 1));
+ else
+ stretch &= ~ ((1 << (int) f->fr_offset) - 1);
+ if (stretch == 0)
+ break;
+ }
+ }
+ if (f != NULL)
+ val += stretch;
+ }
+
+ addr = fragp->fr_address + fragp->fr_fix;
+
+ /* The base address rules are complicated. The base address of
+ a branch is the following instruction. The base address of a
+ PC relative load or add is the instruction itself, but if it
+ is in a delay slot (in which case it can not be extended) use
+ the address of the instruction whose delay slot it is in. */
+ if (type == 'p' || type == 'q')
+ {
+ addr += 2;
+
+ /* If we are currently assuming that this frag should be
+ extended, then, the current address is two bytes
+ higher. */
+ if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ addr += 2;
+
+ /* Ignore the low bit in the target, since it will be set
+ for a text label. */
+ if ((val & 1) != 0)
+ --val;
+ }
+ else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
+ addr -= 4;
+ else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
+ addr -= 2;
+
+ val -= addr & ~ ((1 << op->shift) - 1);
+
+ /* Branch offsets have an implicit 0 in the lowest bit. */
+ if (type == 'p' || type == 'q')
+ val /= 2;
+
+ /* If any of the shifted bits are set, we must use an extended
+ opcode. If the address depends on the size of this
+ instruction, this can lead to a loop, so we arrange to always
+ use an extended opcode. We only check this when we are in
+ the main relaxation loop, when SEC is NULL. */
+ if ((val & ((1 << op->shift) - 1)) != 0 && sec == NULL)
+ {
+ fragp->fr_subtype =
+ RELAX_MIPS16_MARK_LONG_BRANCH (fragp->fr_subtype);
+ return 1;
+ }
+
+ /* If we are about to mark a frag as extended because the value
+ is precisely maxtiny + 1, then there is a chance of an
+ infinite loop as in the following code:
+ la $4,foo
+ .skip 1020
+ .align 2
+ foo:
+ In this case when the la is extended, foo is 0x3fc bytes
+ away, so the la can be shrunk, but then foo is 0x400 away, so
+ the la must be extended. To avoid this loop, we mark the
+ frag as extended if it was small, and is about to become
+ extended with a value of maxtiny + 1. */
+ if (val == ((maxtiny + 1) << op->shift)
+ && ! RELAX_MIPS16_EXTENDED (fragp->fr_subtype)
+ && sec == NULL)
+ {
+ fragp->fr_subtype =
+ RELAX_MIPS16_MARK_LONG_BRANCH (fragp->fr_subtype);
+ return 1;
+ }
+ }
+ else if (symsec != absolute_section && sec != NULL)
+ as_bad_where (fragp->fr_file, fragp->fr_line, _("unsupported relocation"));
+
+ if ((val & ((1 << op->shift) - 1)) != 0
+ || val < (mintiny << op->shift)
+ || val > (maxtiny << op->shift))
+ return 1;
+ else
+ return 0;
+}
+
+/* Estimate the size of a frag before relaxing. Unless this is the
+ mips16, we are not really relaxing here, and the final size is
+ encoded in the subtype information. For the mips16, we have to
+ decide whether we are using an extended opcode or not. */
+
+int
+md_estimate_size_before_relax (fragp, segtype)
+ fragS *fragp;
+ asection *segtype;
+{
+ int change = 0;
+ boolean linkonce = false;
+
+ if (RELAX_MIPS16_P (fragp->fr_subtype))
+ {
+ if (mips16_extended_frag (fragp, segtype, 0))
+ {
+ fragp->fr_subtype = RELAX_MIPS16_MARK_EXTENDED (fragp->fr_subtype);
+ return 4;
+ }
+ else
+ {
+ fragp->fr_subtype = RELAX_MIPS16_CLEAR_EXTENDED (fragp->fr_subtype);
+ return 2;
}
-#else /* ! defined (GPOPT) */
- /* We are not optimizing for the GP register. */
- change = 1;
-#endif /* ! defined (GPOPT) */
+ }
+
+ if (mips_pic == NO_PIC)
+ {
+ change = nopic_need_relax (fragp->fr_symbol, 0);
}
else if (mips_pic == SVR4_PIC)
{
- asection *symsec = fragp->fr_symbol->bsym->section;
+ symbolS *sym;
+ asection *symsec;
+
+ sym = fragp->fr_symbol;
+
+ /* Handle the case of a symbol equated to another symbol. */
+ while (symbol_equated_p (sym)
+ && (! S_IS_DEFINED (sym) || S_IS_COMMON (sym)))
+ {
+ symbolS *n;
+
+ /* It's possible to get a loop here in a badly written
+ program. */
+ n = symbol_get_value_expression (sym)->X_add_symbol;
+ if (n == sym)
+ break;
+ sym = n;
+ }
+
+ symsec = S_GET_SEGMENT (sym);
+
+ /* duplicate the test for LINK_ONCE sections as in adjust_reloc_syms */
+ if (symsec != segtype && ! S_IS_LOCAL (sym))
+ {
+ if ((bfd_get_section_flags (stdoutput, symsec) & SEC_LINK_ONCE)
+ != 0)
+ linkonce = true;
+
+ /* The GNU toolchain uses an extension for ELF: a section
+ beginning with the magic string .gnu.linkonce is a linkonce
+ section. */
+ if (strncmp (segment_name (symsec), ".gnu.linkonce",
+ sizeof ".gnu.linkonce" - 1) == 0)
+ linkonce = true;
+ }
/* This must duplicate the test in adjust_reloc_syms. */
change = (symsec != &bfd_und_section
&& symsec != &bfd_abs_section
- && ! bfd_is_com_section (symsec));
+ && ! bfd_is_com_section (symsec)
+ && !linkonce
+#ifdef OBJ_ELF
+ /* A weak symbol is treated as external. */
+ && ! S_IS_WEAK (sym)
+#endif
+ );
}
else
abort ();
+ RELAX_RELOC1 (fragp->fr_subtype));
/* FIXME: This really needs as_warn_where. */
if (RELAX_WARN (fragp->fr_subtype))
- as_warn ("AT used after \".set noat\" or macro used after \".set nomacro\"");
+ as_warn (_("AT used after \".set noat\" or macro used after \".set nomacro\""));
}
if (! change)
return 0;
- else
- return RELAX_NEW (fragp->fr_subtype) - RELAX_OLD (fragp->fr_subtype);
+ else
+ return RELAX_NEW (fragp->fr_subtype) - RELAX_OLD (fragp->fr_subtype);
+}
+
+/* This is called to see whether a reloc against a defined symbol
+ should be converted into a reloc against a section. Don't adjust
+ MIPS16 jump relocations, so we don't have to worry about the format
+ of the offset in the .o file. Don't adjust relocations against
+ mips16 symbols, so that the linker can find them if it needs to set
+ up a stub. */
+
+int
+mips_fix_adjustable (fixp)
+ fixS *fixp;
+{
+ if (fixp->fx_r_type == BFD_RELOC_MIPS16_JMP)
+ return 0;
+ if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ return 0;
+ if (fixp->fx_addsy == NULL)
+ return 1;
+#ifdef OBJ_ELF
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour
+ && S_GET_OTHER (fixp->fx_addsy) == STO_MIPS16
+ && fixp->fx_subsy == NULL)
+ return 0;
+#endif
+ return 1;
}
/* Translate internal representation of relocation info to BFD target
arelent **
tc_gen_reloc (section, fixp)
- asection *section;
+ asection *section ATTRIBUTE_UNUSED;
fixS *fixp;
{
static arelent *retval[4];
arelent *reloc;
+ bfd_reloc_code_real_type code;
reloc = retval[0] = (arelent *) xmalloc (sizeof (arelent));
retval[1] = NULL;
- reloc->sym_ptr_ptr = &fixp->fx_addsy->bsym;
+ reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
if (mips_pic == EMBEDDED_PIC
is actually the difference between the reloc address and the
subtrahend. */
reloc->addend = reloc->address - S_GET_VALUE (fixp->fx_subsy);
-#ifndef OBJ_ECOFF
- as_fatal ("Double check fx_r_type in tc-mips.c:tc_gen_reloc");
-#endif
+ if (OUTPUT_FLAVOR != bfd_target_ecoff_flavour)
+ as_fatal (_("Double check fx_r_type in tc-mips.c:tc_gen_reloc"));
fixp->fx_r_type = BFD_RELOC_GPREL32;
}
+ else if (fixp->fx_pcrel == 0 || OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ reloc->addend = fixp->fx_addnumber;
else if (fixp->fx_r_type == BFD_RELOC_PCREL_LO16)
{
/* We use a special addend for an internal RELLO reloc. */
- if (fixp->fx_addsy->bsym->flags & BSF_SECTION_SYM)
+ if (symbol_section_p (fixp->fx_addsy))
reloc->addend = reloc->address - S_GET_VALUE (fixp->fx_subsy);
else
reloc->addend = fixp->fx_addnumber + reloc->address;
/* We use a special addend for an internal RELHI reloc. The
reloc is relative to the RELLO; adjust the addend
accordingly. */
- if (fixp->fx_addsy->bsym->flags & BSF_SECTION_SYM)
+ if (symbol_section_p (fixp->fx_addsy))
reloc->addend = (fixp->fx_next->fx_frag->fr_address
+ fixp->fx_next->fx_where
- S_GET_VALUE (fixp->fx_subsy));
+ fixp->fx_next->fx_frag->fr_address
+ fixp->fx_next->fx_where);
}
- else if (fixp->fx_pcrel == 0)
- reloc->addend = fixp->fx_addnumber;
else
{
-#ifndef OBJ_AOUT
- /* A gruesome hack which is a result of the gruesome gas reloc
- handling. */
- reloc->addend = reloc->address;
-#else
- reloc->addend = -reloc->address;
-#endif
+ if (OUTPUT_FLAVOR != bfd_target_aout_flavour)
+ /* A gruesome hack which is a result of the gruesome gas reloc
+ handling. */
+ reloc->addend = reloc->address;
+ else
+ reloc->addend = -reloc->address;
}
/* If this is a variant frag, we may need to adjust the existing
if (fixp->fx_frag->fr_opcode != NULL
&& (fixp->fx_r_type == BFD_RELOC_MIPS_GPREL
|| fixp->fx_r_type == BFD_RELOC_MIPS_GOT16
- || fixp->fx_r_type == BFD_RELOC_MIPS_CALL16))
+ || fixp->fx_r_type == BFD_RELOC_MIPS_CALL16
+ || fixp->fx_r_type == BFD_RELOC_MIPS_GOT_HI16
+ || fixp->fx_r_type == BFD_RELOC_MIPS_GOT_LO16
+ || fixp->fx_r_type == BFD_RELOC_MIPS_CALL_HI16
+ || fixp->fx_r_type == BFD_RELOC_MIPS_CALL_LO16))
{
arelent *reloc2;
+ assert (! RELAX_MIPS16_P (fixp->fx_frag->fr_subtype));
+
/* If this is not the last reloc in this frag, then we have two
- GPREL relocs, both of which are being replaced. Let the
- second one handle all of them. */
+ GPREL relocs, or a GOT_HI16/GOT_LO16 pair, or a
+ CALL_HI16/CALL_LO16, both of which are being replaced. Let
+ the second one handle all of them. */
if (fixp->fx_next != NULL
&& fixp->fx_frag == fixp->fx_next->fx_frag)
{
- assert (fixp->fx_r_type == BFD_RELOC_MIPS_GPREL
- && fixp->fx_next->fx_r_type == BFD_RELOC_MIPS_GPREL);
+ assert ((fixp->fx_r_type == BFD_RELOC_MIPS_GPREL
+ && fixp->fx_next->fx_r_type == BFD_RELOC_MIPS_GPREL)
+ || (fixp->fx_r_type == BFD_RELOC_MIPS_GOT_HI16
+ && (fixp->fx_next->fx_r_type
+ == BFD_RELOC_MIPS_GOT_LO16))
+ || (fixp->fx_r_type == BFD_RELOC_MIPS_CALL_HI16
+ && (fixp->fx_next->fx_r_type
+ == BFD_RELOC_MIPS_CALL_LO16)));
retval[0] = NULL;
return retval;
}
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
reloc2 = retval[1] = (arelent *) xmalloc (sizeof (arelent));
retval[2] = NULL;
- reloc2->sym_ptr_ptr = &fixp->fx_addsy->bsym;
+ reloc2->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *reloc2->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc2->address = (reloc->address
+ (RELAX_RELOC2 (fixp->fx_frag->fr_subtype)
- RELAX_RELOC1 (fixp->fx_frag->fr_subtype)));
}
else if (mips_pic == SVR4_PIC)
{
- if (fixp->fx_r_type != BFD_RELOC_MIPS_GOT16)
+ switch (fixp->fx_r_type)
{
- assert (fixp->fx_r_type == BFD_RELOC_MIPS_CALL16);
+ default:
+ abort ();
+ case BFD_RELOC_MIPS_GOT16:
+ break;
+ case BFD_RELOC_MIPS_CALL16:
+ case BFD_RELOC_MIPS_GOT_LO16:
+ case BFD_RELOC_MIPS_CALL_LO16:
fixp->fx_r_type = BFD_RELOC_MIPS_GOT16;
+ break;
}
}
else
abort ();
}
+ /* Since MIPS ELF uses Rel instead of Rela, encode the vtable entry
+ to be used in the relocation's section offset. */
+ if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ {
+ reloc->address = reloc->addend;
+ reloc->addend = 0;
+ }
+
+ /* Since DIFF_EXPR_OK is defined in tc-mips.h, it is possible that
+ fixup_segment converted a non-PC relative reloc into a PC
+ relative reloc. In such a case, we need to convert the reloc
+ code. */
+ code = fixp->fx_r_type;
+ if (fixp->fx_pcrel)
+ {
+ switch (code)
+ {
+ case BFD_RELOC_8:
+ code = BFD_RELOC_8_PCREL;
+ break;
+ case BFD_RELOC_16:
+ code = BFD_RELOC_16_PCREL;
+ break;
+ case BFD_RELOC_32:
+ code = BFD_RELOC_32_PCREL;
+ break;
+ case BFD_RELOC_64:
+ code = BFD_RELOC_64_PCREL;
+ break;
+ case BFD_RELOC_8_PCREL:
+ case BFD_RELOC_16_PCREL:
+ case BFD_RELOC_32_PCREL:
+ case BFD_RELOC_64_PCREL:
+ case BFD_RELOC_16_PCREL_S2:
+ case BFD_RELOC_PCREL_HI16_S:
+ case BFD_RELOC_PCREL_LO16:
+ break;
+ default:
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("Cannot make %s relocation PC relative"),
+ bfd_get_reloc_code_name (code));
+ }
+ }
+
/* To support a PC relative reloc when generating embedded PIC code
for ECOFF, we use a Cygnus extension. We check for that here to
make sure that we don't let such a reloc escape normally. */
-#ifdef OBJ_ECOFF
- if (fixp->fx_r_type == BFD_RELOC_16_PCREL_S2
+ if ((OUTPUT_FLAVOR == bfd_target_ecoff_flavour
+ || OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ && code == BFD_RELOC_16_PCREL_S2
&& mips_pic != EMBEDDED_PIC)
reloc->howto = NULL;
else
-#endif
- reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
+ reloc->howto = bfd_reloc_type_lookup (stdoutput, code);
if (reloc->howto == NULL)
{
as_bad_where (fixp->fx_file, fixp->fx_line,
- "Can not represent relocation in this object file format");
+ _("Can not represent %s relocation in this object file format"),
+ bfd_get_reloc_code_name (code));
retval[0] = NULL;
}
return retval;
}
+/* Relax a machine dependent frag. This returns the amount by which
+ the current size of the frag should change. */
+
+int
+mips_relax_frag (fragp, stretch)
+ fragS *fragp;
+ long stretch;
+{
+ if (! RELAX_MIPS16_P (fragp->fr_subtype))
+ return 0;
+
+ if (mips16_extended_frag (fragp, (asection *) NULL, stretch))
+ {
+ if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ return 0;
+ fragp->fr_subtype = RELAX_MIPS16_MARK_EXTENDED (fragp->fr_subtype);
+ return 2;
+ }
+ else
+ {
+ if (! RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ return 0;
+ fragp->fr_subtype = RELAX_MIPS16_CLEAR_EXTENDED (fragp->fr_subtype);
+ return -2;
+ }
+
+ return 0;
+}
+
/* Convert a machine dependent frag. */
void
md_convert_frag (abfd, asec, fragp)
- bfd *abfd;
+ bfd *abfd ATTRIBUTE_UNUSED;
segT asec;
fragS *fragp;
{
int old, new;
char *fixptr;
- if (fragp->fr_opcode == NULL)
- return;
+ if (RELAX_MIPS16_P (fragp->fr_subtype))
+ {
+ int type;
+ register const struct mips16_immed_operand *op;
+ boolean small, ext;
+ offsetT val;
+ bfd_byte *buf;
+ unsigned long insn;
+ boolean use_extend;
+ unsigned short extend;
+
+ type = RELAX_MIPS16_TYPE (fragp->fr_subtype);
+ op = mips16_immed_operands;
+ while (op->type != type)
+ ++op;
+
+ if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ {
+ small = false;
+ ext = true;
+ }
+ else
+ {
+ small = true;
+ ext = false;
+ }
+
+ resolve_symbol_value (fragp->fr_symbol, finalize_syms);
+ val = S_GET_VALUE (fragp->fr_symbol);
+ if (op->pcrel)
+ {
+ addressT addr;
+
+ addr = fragp->fr_address + fragp->fr_fix;
+
+ /* The rules for the base address of a PC relative reloc are
+ complicated; see mips16_extended_frag. */
+ if (type == 'p' || type == 'q')
+ {
+ addr += 2;
+ if (ext)
+ addr += 2;
+ /* Ignore the low bit in the target, since it will be
+ set for a text label. */
+ if ((val & 1) != 0)
+ --val;
+ }
+ else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype))
+ addr -= 4;
+ else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
+ addr -= 2;
+
+ addr &= ~ (addressT) ((1 << op->shift) - 1);
+ val -= addr;
+
+ /* Make sure the section winds up with the alignment we have
+ assumed. */
+ if (op->shift > 0)
+ record_alignment (asec, op->shift);
+ }
+
+ if (ext
+ && (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype)
+ || RELAX_MIPS16_DSLOT (fragp->fr_subtype)))
+ as_warn_where (fragp->fr_file, fragp->fr_line,
+ _("extended instruction in delay slot"));
+
+ buf = (bfd_byte *) (fragp->fr_literal + fragp->fr_fix);
+
+ if (target_big_endian)
+ insn = bfd_getb16 (buf);
+ else
+ insn = bfd_getl16 (buf);
+
+ mips16_immed (fragp->fr_file, fragp->fr_line, type, val,
+ RELAX_MIPS16_USER_EXT (fragp->fr_subtype),
+ small, ext, &insn, &use_extend, &extend);
+
+ if (use_extend)
+ {
+ md_number_to_chars (buf, 0xf000 | extend, 2);
+ fragp->fr_fix += 2;
+ buf += 2;
+ }
+
+ md_number_to_chars (buf, insn, 2);
+ fragp->fr_fix += 2;
+ buf += 2;
+ }
+ else
+ {
+ if (fragp->fr_opcode == NULL)
+ return;
+
+ old = RELAX_OLD (fragp->fr_subtype);
+ new = RELAX_NEW (fragp->fr_subtype);
+ fixptr = fragp->fr_literal + fragp->fr_fix;
+
+ if (new > 0)
+ memcpy (fixptr - old, fixptr, new);
+
+ fragp->fr_fix += new - old;
+ }
+}
+
+#ifdef OBJ_ELF
- old = RELAX_OLD (fragp->fr_subtype);
- new = RELAX_NEW (fragp->fr_subtype);
- fixptr = fragp->fr_literal + fragp->fr_fix;
+/* This function is called after the relocs have been generated.
+ We've been storing mips16 text labels as odd. Here we convert them
+ back to even for the convenience of the debugger. */
- if (new > 0)
- memcpy (fixptr - old, fixptr, new);
+void
+mips_frob_file_after_relocs ()
+{
+ asymbol **syms;
+ unsigned int count, i;
+
+ if (OUTPUT_FLAVOR != bfd_target_elf_flavour)
+ return;
- fragp->fr_fix += new - old;
+ syms = bfd_get_outsymbols (stdoutput);
+ count = bfd_get_symcount (stdoutput);
+ for (i = 0; i < count; i++, syms++)
+ {
+ if (elf_symbol (*syms)->internal_elf_sym.st_other == STO_MIPS16
+ && ((*syms)->value & 1) != 0)
+ {
+ (*syms)->value &= ~1;
+ /* If the symbol has an odd size, it was probably computed
+ incorrectly, so adjust that as well. */
+ if ((elf_symbol (*syms)->internal_elf_sym.st_size & 1) != 0)
+ ++elf_symbol (*syms)->internal_elf_sym.st_size;
+ }
+ }
}
+#endif
+
/* This function is called whenever a label is defined. It is used
when handling branch delays; if a branch has a label, we assume we
can not move it. */
mips_define_label (sym)
symbolS *sym;
{
- insn_label = sym;
+ struct insn_label_list *l;
+
+ if (free_insn_labels == NULL)
+ l = (struct insn_label_list *) xmalloc (sizeof *l);
+ else
+ {
+ l = free_insn_labels;
+ free_insn_labels = l->next;
+ }
+
+ l->label = sym;
+ l->next = insn_labels;
+ insn_labels = l;
}
\f
-#ifdef OBJ_ELF
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
/* Some special processing for a MIPS ELF file. */
void
mips_elf_final_processing ()
{
- Elf32_RegInfo s;
-
- /* Write out the .reginfo section. */
- s.ri_gprmask = mips_gprmask;
- s.ri_cprmask[0] = mips_cprmask[0];
- s.ri_cprmask[1] = mips_cprmask[1];
- s.ri_cprmask[2] = mips_cprmask[2];
- s.ri_cprmask[3] = mips_cprmask[3];
- /* The gp_value field is set by the MIPS ELF backend. */
-
- bfd_mips_elf32_swap_reginfo_out (stdoutput, &s,
- ((Elf32_External_RegInfo *)
- mips_regmask_frag));
+ /* Write out the register information. */
+ if (! mips_64)
+ {
+ Elf32_RegInfo s;
+
+ s.ri_gprmask = mips_gprmask;
+ s.ri_cprmask[0] = mips_cprmask[0];
+ s.ri_cprmask[1] = mips_cprmask[1];
+ s.ri_cprmask[2] = mips_cprmask[2];
+ s.ri_cprmask[3] = mips_cprmask[3];
+ /* The gp_value field is set by the MIPS ELF backend. */
+
+ bfd_mips_elf32_swap_reginfo_out (stdoutput, &s,
+ ((Elf32_External_RegInfo *)
+ mips_regmask_frag));
+ }
+ else
+ {
+ Elf64_Internal_RegInfo s;
+
+ s.ri_gprmask = mips_gprmask;
+ s.ri_pad = 0;
+ s.ri_cprmask[0] = mips_cprmask[0];
+ s.ri_cprmask[1] = mips_cprmask[1];
+ s.ri_cprmask[2] = mips_cprmask[2];
+ s.ri_cprmask[3] = mips_cprmask[3];
+ /* The gp_value field is set by the MIPS ELF backend. */
+
+ bfd_mips_elf64_swap_reginfo_out (stdoutput, &s,
+ ((Elf64_External_RegInfo *)
+ mips_regmask_frag));
+ }
/* Set the MIPS ELF flag bits. FIXME: There should probably be some
sort of BFD interface for this. */
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_NOREORDER;
if (mips_pic != NO_PIC)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_PIC;
+
+ /* Set the MIPS ELF ABI flags. */
+ if (mips_abi_string == 0)
+ ;
+ else if (strcmp (mips_abi_string, "32") == 0)
+ elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_O32;
+ else if (strcmp (mips_abi_string, "o64") == 0)
+ elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_O64;
+ else if (strcmp (mips_abi_string, "eabi") == 0)
+ {
+ if (mips_eabi64)
+ elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_EABI64;
+ else
+ elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_EABI32;
+ }
+
+ if (mips_32bitmode)
+ elf_elfheader (stdoutput)->e_flags |= EF_MIPS_32BITMODE;
}
-#endif /* OBJ_ELF */
+#endif /* OBJ_ELF || OBJ_MAYBE_ELF */
\f
-#ifndef ECOFF_DEBUGGING
+typedef struct proc {
+ symbolS *isym;
+ unsigned long reg_mask;
+ unsigned long reg_offset;
+ unsigned long fpreg_mask;
+ unsigned long fpreg_offset;
+ unsigned long frame_offset;
+ unsigned long frame_reg;
+ unsigned long pc_reg;
+} procS;
+
+static procS cur_proc;
+static procS *cur_proc_ptr;
+static int numprocs;
-/* These functions should really be defined by the object file format,
- since they are related to debugging information. However, this
- code has to work for the a.out format, which does not define them,
- so we provide simple versions here. These don't actually generate
- any debugging information, but they do simple checking and someday
- somebody may make them useful. */
+/* Fill in an rs_align_code fragment. */
-typedef struct loc
+void
+mips_handle_align (fragp)
+ fragS *fragp;
{
- struct loc *loc_next;
- unsigned long loc_fileno;
- unsigned long loc_lineno;
- unsigned long loc_offset;
- unsigned short loc_delta;
- unsigned short loc_count;
-#if 0
- fragS *loc_frag;
-#endif
-}
-locS;
+ if (fragp->fr_type != rs_align_code)
+ return;
-typedef struct proc
- {
- struct proc *proc_next;
- struct symbol *proc_isym;
- struct symbol *proc_end;
- unsigned long proc_reg_mask;
- unsigned long proc_reg_offset;
- unsigned long proc_fpreg_mask;
- unsigned long proc_fpreg_offset;
- unsigned long proc_frameoffset;
- unsigned long proc_framereg;
- unsigned long proc_pcreg;
- locS *proc_iline;
- struct file *proc_file;
- int proc_index;
- }
-procS;
+ if (mips_opts.mips16)
+ {
+ static const unsigned char be_nop[] = { 0x65, 0x00 };
+ static const unsigned char le_nop[] = { 0x00, 0x65 };
-typedef struct file
- {
- struct file *file_next;
- unsigned long file_fileno;
- struct symbol *file_symbol;
- struct symbol *file_end;
- struct proc *file_proc;
- int file_numprocs;
- }
-fileS;
+ int bytes;
+ char *p;
-static struct obstack proc_frags;
-static procS *proc_lastP;
-static procS *proc_rootP;
-static int numprocs;
+ bytes = fragp->fr_next->fr_address - fragp->fr_address - fragp->fr_fix;
+ p = fragp->fr_literal + fragp->fr_fix;
+
+ if (bytes & 1)
+ {
+ *p++ = 0;
+ fragp->fr_fix += 1;
+ }
+
+ memcpy (p, (target_big_endian ? be_nop : le_nop), 2);
+ fragp->fr_var = 2;
+ }
+
+ /* For mips32, a nop is a zero, which we trivially get by doing nothing. */
+}
static void
md_obj_begin ()
{
- obstack_begin (&proc_frags, 0x2000);
}
static void
md_obj_end ()
{
/* check for premature end, nesting errors, etc */
- if (proc_lastP && proc_lastP->proc_end == NULL)
- as_warn ("missing `.end' at end of assembly");
+ if (cur_proc_ptr)
+ as_warn (_("missing `.end' at end of assembly"));
}
-extern char hex_value[];
-
static long
get_number ()
{
++input_line_pointer;
negative = 1;
}
- if (!isdigit (*input_line_pointer))
- as_bad ("Expected simple number.");
+ if (!isdigit ((unsigned char) *input_line_pointer))
+ as_bad (_("Expected simple number."));
if (input_line_pointer[0] == '0')
{
if (input_line_pointer[1] == 'x')
{
input_line_pointer += 2;
- while (isxdigit (*input_line_pointer))
+ while (isxdigit ((unsigned char) *input_line_pointer))
{
val <<= 4;
- val |= hex_value[(int) *input_line_pointer++];
+ val |= hex_value (*input_line_pointer++);
}
return negative ? -val : val;
}
else
{
++input_line_pointer;
- while (isdigit (*input_line_pointer))
+ while (isdigit ((unsigned char) *input_line_pointer))
{
val <<= 3;
val |= *input_line_pointer++ - '0';
return negative ? -val : val;
}
}
- if (!isdigit (*input_line_pointer))
+ if (!isdigit ((unsigned char) *input_line_pointer))
{
- printf (" *input_line_pointer == '%c' 0x%02x\n",
+ printf (_(" *input_line_pointer == '%c' 0x%02x\n"),
*input_line_pointer, *input_line_pointer);
- as_warn ("Invalid number");
+ as_warn (_("Invalid number"));
return -1;
}
- while (isdigit (*input_line_pointer))
+ while (isdigit ((unsigned char) *input_line_pointer))
{
val *= 10;
val += *input_line_pointer++ - '0';
static void
s_file (x)
- int x;
+ int x ATTRIBUTE_UNUSED;
{
int line;
s_app_file (0);
}
-
/* The .end directive. */
static void
-s_mipsend (x)
- int x;
+s_mips_end (x)
+ int x ATTRIBUTE_UNUSED;
{
symbolS *p;
+ int maybe_text;
if (!is_end_of_line[(unsigned char) *input_line_pointer])
{
}
else
p = NULL;
- if (now_seg != text_section)
- as_warn (".end not in text section");
- if (!proc_lastP)
+
+#ifdef BFD_ASSEMBLER
+ if ((bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) != 0)
+ maybe_text = 1;
+ else
+ maybe_text = 0;
+#else
+ if (now_seg != data_section && now_seg != bss_section)
+ maybe_text = 1;
+ else
+ maybe_text = 0;
+#endif
+
+ if (!maybe_text)
+ as_warn (_(".end not in text section"));
+
+ if (!cur_proc_ptr)
{
- as_warn (".end and no .ent seen yet.");
+ as_warn (_(".end directive without a preceding .ent directive."));
+ demand_empty_rest_of_line ();
return;
}
if (p != NULL)
{
assert (S_GET_NAME (p));
- if (strcmp (S_GET_NAME (p), S_GET_NAME (proc_lastP->proc_isym)))
- as_warn (".end symbol does not match .ent symbol.");
+ if (strcmp (S_GET_NAME (p), S_GET_NAME (cur_proc_ptr->isym)))
+ as_warn (_(".end symbol does not match .ent symbol."));
}
+ else
+ as_warn (_(".end directive missing or unknown symbol"));
+
+#ifdef MIPS_STABS_ELF
+ {
+ segT saved_seg = now_seg;
+ subsegT saved_subseg = now_subseg;
+ fragS *saved_frag = frag_now;
+ valueT dot;
+ segT seg;
+ expressionS exp;
+ char *fragp;
+
+ dot = frag_now_fix ();
+
+#ifdef md_flush_pending_output
+ md_flush_pending_output ();
+#endif
+
+ assert (pdr_seg);
+ subseg_set (pdr_seg, 0);
+
+ /* Write the symbol. */
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = p;
+ exp.X_add_number = 0;
+ emit_expr (&exp, 4);
+
+ fragp = frag_more (7 * 4);
- proc_lastP->proc_end = (symbolS *) 1;
+ md_number_to_chars (fragp, (valueT) cur_proc_ptr->reg_mask, 4);
+ md_number_to_chars (fragp + 4, (valueT) cur_proc_ptr->reg_offset, 4);
+ md_number_to_chars (fragp + 8, (valueT) cur_proc_ptr->fpreg_mask, 4);
+ md_number_to_chars (fragp + 12, (valueT) cur_proc_ptr->fpreg_offset, 4);
+ md_number_to_chars (fragp + 16, (valueT) cur_proc_ptr->frame_offset, 4);
+ md_number_to_chars (fragp + 20, (valueT) cur_proc_ptr->frame_reg, 4);
+ md_number_to_chars (fragp + 24, (valueT) cur_proc_ptr->pc_reg, 4);
+
+ subseg_set (saved_seg, saved_subseg);
+ }
+#endif
+
+ cur_proc_ptr = NULL;
}
/* The .aent and .ent directives. */
static void
-s_ent (aent)
+s_mips_ent (aent)
int aent;
{
int number = 0;
- procS *procP;
symbolS *symbolP;
+ int maybe_text;
symbolP = get_symbol ();
if (*input_line_pointer == ',')
input_line_pointer++;
SKIP_WHITESPACE ();
- if (isdigit (*input_line_pointer) || *input_line_pointer == '-')
+ if (isdigit ((unsigned char) *input_line_pointer)
+ || *input_line_pointer == '-')
number = get_number ();
- if (now_seg != text_section)
- as_warn (".ent or .aent not in text section.");
- if (!aent && proc_lastP && proc_lastP->proc_end == NULL)
- as_warn ("missing `.end'");
+#ifdef BFD_ASSEMBLER
+ if ((bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) != 0)
+ maybe_text = 1;
+ else
+ maybe_text = 0;
+#else
+ if (now_seg != data_section && now_seg != bss_section)
+ maybe_text = 1;
+ else
+ maybe_text = 0;
+#endif
+
+ if (!maybe_text)
+ as_warn (_(".ent or .aent not in text section."));
+
+ if (!aent && cur_proc_ptr)
+ as_warn (_("missing `.end'"));
if (!aent)
{
- procP = (procS *) obstack_alloc (&proc_frags, sizeof (*procP));
- procP->proc_isym = symbolP;
- procP->proc_reg_mask = 0;
- procP->proc_reg_offset = 0;
- procP->proc_fpreg_mask = 0;
- procP->proc_fpreg_offset = 0;
- procP->proc_frameoffset = 0;
- procP->proc_framereg = 0;
- procP->proc_pcreg = 0;
- procP->proc_end = NULL;
- procP->proc_next = NULL;
- if (proc_lastP)
- proc_lastP->proc_next = procP;
- else
- proc_rootP = procP;
- proc_lastP = procP;
+ cur_proc_ptr = &cur_proc;
+ memset (cur_proc_ptr, '\0', sizeof (procS));
+
+ cur_proc_ptr->isym = symbolP;
+
+ symbol_get_bfdsym (symbolP)->flags |= BSF_FUNCTION;
+
numprocs++;
}
+
demand_empty_rest_of_line ();
}
-/* The .frame directive. */
+/* The .frame directive. If the mdebug section is present (IRIX 5 native)
+ then ecoff.c (ecoff_directive_frame) is used. For embedded targets,
+ s_mips_frame is used so that we can set the PDR information correctly.
+ We can't use the ecoff routines because they make reference to the ecoff
+ symbol table (in the mdebug section). */
-#if 0
static void
-s_frame (x)
- int x;
+s_mips_frame (ignore)
+ int ignore;
{
- char str[100];
- symbolS *symP;
- int frame_reg;
- int frame_off;
- int pcreg;
+#ifdef MIPS_STABS_ELF
- frame_reg = tc_get_register (1);
- if (*input_line_pointer == ',')
- input_line_pointer++;
- frame_off = get_absolute_expression ();
- if (*input_line_pointer == ',')
- input_line_pointer++;
- pcreg = tc_get_register (0);
-
- /* bob third eye */
- assert (proc_rootP);
- proc_rootP->proc_framereg = frame_reg;
- proc_rootP->proc_frameoffset = frame_off;
- proc_rootP->proc_pcreg = pcreg;
- /* bob macho .frame */
-
- /* We don't have to write out a frame stab for unoptimized code. */
- if (!(frame_reg == FP && frame_off == 0))
- {
- if (!proc_lastP)
- as_warn ("No .ent for .frame to use.");
- (void) sprintf (str, "R%d;%d", frame_reg, frame_off);
- symP = symbol_new (str, N_VFP, 0, frag_now);
- S_SET_TYPE (symP, N_RMASK);
- S_SET_OTHER (symP, 0);
- S_SET_DESC (symP, 0);
- symP->sy_forward = proc_lastP->proc_isym;
- /* bob perhaps I should have used pseudo set */
+ long val;
+
+ if (cur_proc_ptr == (procS *) NULL)
+ {
+ as_warn (_(".frame outside of .ent"));
+ demand_empty_rest_of_line ();
+ return;
+ }
+
+ cur_proc_ptr->frame_reg = tc_get_register (1);
+
+ SKIP_WHITESPACE ();
+ if (*input_line_pointer++ != ','
+ || get_absolute_expression_and_terminator (&val) != ',')
+ {
+ as_warn (_("Bad .frame directive"));
+ --input_line_pointer;
+ demand_empty_rest_of_line ();
+ return;
}
+
+ cur_proc_ptr->frame_offset = val;
+ cur_proc_ptr->pc_reg = tc_get_register (0);
+
demand_empty_rest_of_line ();
+#else
+ s_ignore (ignore);
+#endif /* MIPS_STABS_ELF */
}
-#endif
-/* The .fmask and .mask directives. */
+/* The .fmask and .mask directives. If the mdebug section is present
+ (IRIX 5 native) then ecoff.c (ecoff_directive_mask) is used. For
+ embedded targets, s_mips_mask is used so that we can set the PDR
+ information correctly. We can't use the ecoff routines because they
+ make reference to the ecoff symbol table (in the mdebug section). */
-#if 0
static void
-s_mask (reg_type)
+s_mips_mask (reg_type)
char reg_type;
{
- char str[100], *strP;
- symbolS *symP;
- int i;
- unsigned int mask;
- int off;
+#ifdef MIPS_STABS_ELF
+ long mask, off;
+
+ if (cur_proc_ptr == (procS *) NULL)
+ {
+ as_warn (_(".mask/.fmask outside of .ent"));
+ demand_empty_rest_of_line ();
+ return;
+ }
+
+ if (get_absolute_expression_and_terminator (&mask) != ',')
+ {
+ as_warn (_("Bad .mask/.fmask directive"));
+ --input_line_pointer;
+ demand_empty_rest_of_line ();
+ return;
+ }
- mask = get_number ();
- if (*input_line_pointer == ',')
- input_line_pointer++;
off = get_absolute_expression ();
- /* bob only for coff */
- assert (proc_rootP);
if (reg_type == 'F')
{
- proc_rootP->proc_fpreg_mask = mask;
- proc_rootP->proc_fpreg_offset = off;
+ cur_proc_ptr->fpreg_mask = mask;
+ cur_proc_ptr->fpreg_offset = off;
}
else
{
- proc_rootP->proc_reg_mask = mask;
- proc_rootP->proc_reg_offset = off;
+ cur_proc_ptr->reg_mask = mask;
+ cur_proc_ptr->reg_offset = off;
}
- /* bob macho .mask + .fmask */
-
- /* We don't have to write out a mask stab if no saved regs. */
- if (!(mask == 0))
- {
- if (!proc_lastP)
- as_warn ("No .ent for .mask to use.");
- strP = str;
- for (i = 0; i < 32; i++)
- {
- if (mask % 2)
- {
- sprintf (strP, "%c%d,", reg_type, i);
- strP += strlen (strP);
- }
- mask /= 2;
- }
- sprintf (strP, ";%d,", off);
- symP = symbol_new (str, N_RMASK, 0, frag_now);
- S_SET_TYPE (symP, N_RMASK);
- S_SET_OTHER (symP, 0);
- S_SET_DESC (symP, 0);
- symP->sy_forward = proc_lastP->proc_isym;
- /* bob perhaps I should have used pseudo set */
- }
+ demand_empty_rest_of_line ();
+#else
+ s_ignore (reg_type);
+#endif /* MIPS_STABS_ELF */
}
-#endif
/* The .loc directive. */
}
#endif
-#endif /* ! defined (ECOFF_DEBUGGING) */
+/* CPU name/ISA/number mapping table.
+
+ Entries are grouped by type. The first matching CPU or ISA entry
+ gets chosen by CPU or ISA, so it should be the 'canonical' name
+ for that type. Entries after that within the type are sorted
+ alphabetically.
+
+ Case is ignored in comparison, so put the canonical entry in the
+ appropriate case but everything else in lower case to ease eye pain. */
+static const struct mips_cpu_info mips_cpu_info_table[] =
+{
+ /* MIPS1 ISA */
+ { "MIPS1", 1, ISA_MIPS1, CPU_R3000, },
+ { "mips", 1, ISA_MIPS1, CPU_R3000, },
+
+ /* MIPS2 ISA */
+ { "MIPS2", 1, ISA_MIPS2, CPU_R6000, },
+
+ /* MIPS3 ISA */
+ { "MIPS3", 1, ISA_MIPS3, CPU_R4000, },
+
+ /* MIPS4 ISA */
+ { "MIPS4", 1, ISA_MIPS4, CPU_R8000, },
+
+ /* MIPS5 ISA */
+ { "MIPS5", 1, ISA_MIPS5, CPU_MIPS5, },
+ { "Generic-MIPS5", 0, ISA_MIPS5, CPU_MIPS5, },
+
+ /* MIPS32 ISA */
+ { "MIPS32", 1, ISA_MIPS32, CPU_MIPS32, },
+ { "Generic-MIPS32", 0, ISA_MIPS32, CPU_MIPS32, },
+
+#if 1
+ /* XXX for now, MIPS64 -> MIPS3 because of history */
+ { "MIPS64", 1, ISA_MIPS3, CPU_R4000 }, /* XXX! */
+#else
+ /* MIPS64 ISA */
+ { "MIPS64", 1, ISA_MIPS64, CPU_MIPS64 },
+#endif
+ { "mips64isa", 1, ISA_MIPS64, CPU_MIPS64 },
+ { "Generic-MIPS64", 0, ISA_MIPS64, CPU_MIPS64, },
+
+ /* R2000 CPU */
+ { "R2000", 0, ISA_MIPS1, CPU_R2000, },
+ { "2000", 0, ISA_MIPS1, CPU_R2000, },
+ { "2k", 0, ISA_MIPS1, CPU_R2000, },
+ { "r2k", 0, ISA_MIPS1, CPU_R2000, },
+
+ /* R3000 CPU */
+ { "R3000", 0, ISA_MIPS1, CPU_R3000, },
+ { "3000", 0, ISA_MIPS1, CPU_R3000, },
+ { "3k", 0, ISA_MIPS1, CPU_R3000, },
+ { "r3k", 0, ISA_MIPS1, CPU_R3000, },
+
+ /* TX3900 CPU */
+ { "R3900", 0, ISA_MIPS1, CPU_R3900, },
+ { "3900", 0, ISA_MIPS1, CPU_R3900, },
+ { "mipstx39", 0, ISA_MIPS1, CPU_R3900, },
+
+ /* R4000 CPU */
+ { "R4000", 0, ISA_MIPS3, CPU_R4000, },
+ { "4000", 0, ISA_MIPS3, CPU_R4000, },
+ { "4k", 0, ISA_MIPS3, CPU_R4000, }, /* beware */
+ { "r4k", 0, ISA_MIPS3, CPU_R4000, },
+
+ /* R4010 CPU */
+ { "R4010", 0, ISA_MIPS2, CPU_R4010, },
+ { "4010", 0, ISA_MIPS2, CPU_R4010, },
+
+ /* R4400 CPU */
+ { "R4400", 0, ISA_MIPS3, CPU_R4400, },
+ { "4400", 0, ISA_MIPS3, CPU_R4400, },
+
+ /* R4600 CPU */
+ { "R4600", 0, ISA_MIPS3, CPU_R4600, },
+ { "4600", 0, ISA_MIPS3, CPU_R4600, },
+ { "mips64orion", 0, ISA_MIPS3, CPU_R4600, },
+ { "orion", 0, ISA_MIPS3, CPU_R4600, },
+
+ /* R4650 CPU */
+ { "R4650", 0, ISA_MIPS3, CPU_R4650, },
+ { "4650", 0, ISA_MIPS3, CPU_R4650, },
+
+ /* R6000 CPU */
+ { "R6000", 0, ISA_MIPS2, CPU_R6000, },
+ { "6000", 0, ISA_MIPS2, CPU_R6000, },
+ { "6k", 0, ISA_MIPS2, CPU_R6000, },
+ { "r6k", 0, ISA_MIPS2, CPU_R6000, },
+
+ /* R8000 CPU */
+ { "R8000", 0, ISA_MIPS4, CPU_R8000, },
+ { "8000", 0, ISA_MIPS4, CPU_R8000, },
+ { "8k", 0, ISA_MIPS4, CPU_R8000, },
+ { "r8k", 0, ISA_MIPS4, CPU_R8000, },
+
+ /* R10000 CPU */
+ { "R10000", 0, ISA_MIPS4, CPU_R10000, },
+ { "10000", 0, ISA_MIPS4, CPU_R10000, },
+ { "10k", 0, ISA_MIPS4, CPU_R10000, },
+ { "r10k", 0, ISA_MIPS4, CPU_R10000, },
+
+ /* VR4100 CPU */
+ { "VR4100", 0, ISA_MIPS3, CPU_VR4100, },
+ { "4100", 0, ISA_MIPS3, CPU_VR4100, },
+ { "mips64vr4100", 0, ISA_MIPS3, CPU_VR4100, },
+ { "r4100", 0, ISA_MIPS3, CPU_VR4100, },
+
+ /* VR4111 CPU */
+ { "VR4111", 0, ISA_MIPS3, CPU_R4111, },
+ { "4111", 0, ISA_MIPS3, CPU_R4111, },
+ { "mips64vr4111", 0, ISA_MIPS3, CPU_R4111, },
+ { "r4111", 0, ISA_MIPS3, CPU_R4111, },
+
+ /* VR4300 CPU */
+ { "VR4300", 0, ISA_MIPS3, CPU_R4300, },
+ { "4300", 0, ISA_MIPS3, CPU_R4300, },
+ { "mips64vr4300", 0, ISA_MIPS3, CPU_R4300, },
+ { "r4300", 0, ISA_MIPS3, CPU_R4300, },
+
+ /* VR5000 CPU */
+ { "VR5000", 0, ISA_MIPS4, CPU_R5000, },
+ { "5000", 0, ISA_MIPS4, CPU_R5000, },
+ { "5k", 0, ISA_MIPS4, CPU_R5000, },
+ { "mips64vr5000", 0, ISA_MIPS4, CPU_R5000, },
+ { "r5000", 0, ISA_MIPS4, CPU_R5000, },
+ { "r5200", 0, ISA_MIPS4, CPU_R5000, },
+ { "r5230", 0, ISA_MIPS4, CPU_R5000, },
+ { "r5231", 0, ISA_MIPS4, CPU_R5000, },
+ { "r5261", 0, ISA_MIPS4, CPU_R5000, },
+ { "r5721", 0, ISA_MIPS4, CPU_R5000, },
+ { "r5k", 0, ISA_MIPS4, CPU_R5000, },
+ { "r7000", 0, ISA_MIPS4, CPU_R5000, },
+
+ /* MIPS32 4K CPU */
+ { "MIPS32-4K", 0, ISA_MIPS32, CPU_MIPS32_4K, },
+ { "4kc", 0, ISA_MIPS32, CPU_MIPS32_4K, },
+ { "4km", 0, ISA_MIPS32, CPU_MIPS32_4K, },
+ { "4kp", 0, ISA_MIPS32, CPU_MIPS32_4K, },
+ { "mips32-4kc", 0, ISA_MIPS32, CPU_MIPS32_4K, },
+ { "mips32-4km", 0, ISA_MIPS32, CPU_MIPS32_4K, },
+ { "mips32-4kp", 0, ISA_MIPS32, CPU_MIPS32_4K, },
+
+ /* SiByte SB-1 CPU */
+ { "SB-1", 0, ISA_MIPS64, CPU_SB1, },
+ { "sb-1250", 0, ISA_MIPS64, CPU_SB1, },
+ { "sb1", 0, ISA_MIPS64, CPU_SB1, },
+ { "sb1250", 0, ISA_MIPS64, CPU_SB1, },
+
+ /* End marker. */
+ { NULL, 0, 0, 0, },
+};
+
+static const struct mips_cpu_info *
+mips_cpu_info_from_name (name)
+ const char *name;
+{
+ int i;
+
+ for (i = 0; mips_cpu_info_table[i].name != NULL; i++)
+ if (strcasecmp (name, mips_cpu_info_table[i].name) == 0)
+ return (&mips_cpu_info_table[i]);
+
+ return NULL;
+}
+
+static const struct mips_cpu_info *
+mips_cpu_info_from_isa (isa)
+ int isa;
+{
+ int i;
+
+ for (i = 0; mips_cpu_info_table[i].name != NULL; i++)
+ if (mips_cpu_info_table[i].is_isa
+ && isa == mips_cpu_info_table[i].isa)
+ return (&mips_cpu_info_table[i]);
+
+ return NULL;
+}
+
+static const struct mips_cpu_info *
+mips_cpu_info_from_cpu (cpu)
+ int cpu;
+{
+ int i;
+
+ for (i = 0; mips_cpu_info_table[i].name != NULL; i++)
+ if (!mips_cpu_info_table[i].is_isa
+ && cpu == mips_cpu_info_table[i].cpu)
+ return (&mips_cpu_info_table[i]);
+
+ return NULL;
+}
projects / deliverable / binutils-gdb.git / blobdiff