/* tc-mn10200.c -- Assembler code for the Matsushita 10200
-
- Copyright (C) 1996 Free Software Foundation.
+ Copyright (C) 1996-2020 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ the Free Software Foundation, 51 Franklin Street - Fifth Floor,
+ Boston, MA 02110-1301, USA. */
-#include <stdio.h>
-#include <ctype.h>
#include "as.h"
-#include "subsegs.h"
+#include "safe-ctype.h"
+#include "subsegs.h"
#include "opcode/mn10200.h"
\f
/* Structure to hold information about predefined registers. */
int value;
};
-/* Generic assembler global variables which must be defined by all targets. */
+/* Generic assembler global variables which must be defined by all
+ targets. */
-/* Characters which always start a comment. */
+/* Characters which always start a comment. */
const char comment_chars[] = "#";
/* Characters which start a comment at the beginning of a line. */
const char line_comment_chars[] = ";#";
-/* Characters which may be used to separate multiple commands on a
+/* Characters which may be used to separate multiple commands on a
single line. */
const char line_separator_chars[] = ";";
-/* Characters which are used to indicate an exponent in a floating
+/* Characters which are used to indicate an exponent in a floating
point number. */
const char EXP_CHARS[] = "eE";
-/* Characters which mean that a number is a floating point constant,
+/* Characters which mean that a number is a floating point constant,
as in 0d1.0. */
const char FLT_CHARS[] = "dD";
\f
+const relax_typeS md_relax_table[] =
+ {
+ /* bCC relaxing */
+ {0x81, -0x7e, 2, 1},
+ {0x8004, -0x7ffb, 5, 2},
+ {0x800006, -0x7ffff9, 7, 0},
+ /* bCCx relaxing */
+ {0x81, -0x7e, 3, 4},
+ {0x8004, -0x7ffb, 6, 5},
+ {0x800006, -0x7ffff9, 8, 0},
+ /* jsr relaxing */
+ {0x8004, -0x7ffb, 3, 7},
+ {0x800006, -0x7ffff9, 5, 0},
+ /* jmp relaxing */
+ {0x81, -0x7e, 2, 9},
+ {0x8004, -0x7ffb, 3, 10},
+ {0x800006, -0x7ffff9, 5, 0},
+
+};
+
+
+/* Fixups. */
+#define MAX_INSN_FIXUPS 5
-/* local functions */
-static void mn10200_insert_operand PARAMS ((unsigned long *, unsigned long *,
- const struct mn10200_operand *,
- offsetT, char *, unsigned,
- unsigned));
-static unsigned long check_operand PARAMS ((unsigned long,
- const struct mn10200_operand *,
- offsetT));
-static int reg_name_search PARAMS ((const struct reg_name *, int, const char *));
-static boolean data_register_name PARAMS ((expressionS *expressionP));
-static boolean address_register_name PARAMS ((expressionS *expressionP));
-static boolean other_register_name PARAMS ((expressionS *expressionP));
-
-
-/* fixups */
-#define MAX_INSN_FIXUPS (5)
struct mn10200_fixup
{
expressionS exp;
int opindex;
bfd_reloc_code_real_type reloc;
};
+
struct mn10200_fixup fixups[MAX_INSN_FIXUPS];
static int fc;
\f
const char *md_shortopts = "";
-struct option md_longopts[] = {
+
+struct option md_longopts[] =
+{
{NULL, no_argument, NULL, 0}
};
-size_t md_longopts_size = sizeof(md_longopts);
+
+size_t md_longopts_size = sizeof (md_longopts);
/* The target specific pseudo-ops which we support. */
const pseudo_typeS md_pseudo_table[] =
/* Opcode hash table. */
static struct hash_control *mn10200_hash;
-/* This table is sorted. Suitable for searching by a binary search. */
+/* This table is sorted. Suitable for searching by a binary search. */
static const struct reg_name data_registers[] =
{
{ "d0", 0 },
{ "d2", 2 },
{ "d3", 3 },
};
-#define DATA_REG_NAME_CNT (sizeof(data_registers) / sizeof(struct reg_name))
+#define DATA_REG_NAME_CNT \
+ (sizeof (data_registers) / sizeof (struct reg_name))
static const struct reg_name address_registers[] =
{
{ "a2", 2 },
{ "a3", 3 },
};
-#define ADDRESS_REG_NAME_CNT (sizeof(address_registers) / sizeof(struct reg_name))
+#define ADDRESS_REG_NAME_CNT \
+ (sizeof (address_registers) / sizeof (struct reg_name))
static const struct reg_name other_registers[] =
{
{ "mdr", 0 },
{ "psw", 0 },
};
-#define OTHER_REG_NAME_CNT (sizeof(other_registers) / sizeof(struct reg_name))
+#define OTHER_REG_NAME_CNT \
+ (sizeof (other_registers) / sizeof (struct reg_name))
/* reg_name_search does a binary search of the given register table
- to see if "name" is a valid regiter name. Returns the register
- number from the array on success, or -1 on failure. */
+ to see if "name" is a valid register name. Returns the register
+ number from the array on success, or -1 on failure. */
static int
-reg_name_search (regs, regcount, name)
- const struct reg_name *regs;
- int regcount;
- const char *name;
+reg_name_search (const struct reg_name *regs,
+ int regcount,
+ const char *name)
{
int middle, low, high;
int cmp;
high = middle - 1;
else if (cmp > 0)
low = middle + 1;
- else
- return regs[middle].value;
+ else
+ return regs[middle].value;
}
while (low <= high);
return -1;
}
-
/* Summary of register_name().
- *
- * in: Input_line_pointer points to 1st char of operand.
- *
- * out: A expressionS.
- * The operand may have been a register: in this case, X_op == O_register,
- * X_add_number is set to the register number, and truth is returned.
- * Input_line_pointer->(next non-blank) char after operand, or is in
- * its original state.
- */
-static boolean
-data_register_name (expressionP)
- expressionS *expressionP;
+
+ in: Input_line_pointer points to 1st char of operand.
+
+ out: An expressionS.
+ The operand may have been a register: in this case, X_op == O_register,
+ X_add_number is set to the register number, and truth is returned.
+ Input_line_pointer->(next non-blank) char after operand, or is in
+ its original state. */
+
+static bfd_boolean
+data_register_name (expressionS *expressionP)
{
int reg_number;
char *name;
char *start;
char c;
- /* Find the spelling of the operand */
- start = name = input_line_pointer;
-
- c = get_symbol_end ();
+ /* Find the spelling of the operand. */
+ start = input_line_pointer;
+ c = get_symbol_name (&name);
reg_number = reg_name_search (data_registers, DATA_REG_NAME_CNT, name);
- /* look to see if it's in the register table */
- if (reg_number >= 0)
+ /* Put back the delimiting char. */
+ (void) restore_line_pointer (c);
+
+ /* Look to see if it's in the register table. */
+ if (reg_number >= 0)
{
expressionP->X_op = O_register;
expressionP->X_add_number = reg_number;
- /* make the rest nice */
+ /* Make the rest nice. */
expressionP->X_add_symbol = NULL;
expressionP->X_op_symbol = NULL;
- *input_line_pointer = c; /* put back the delimiting char */
- return true;
- }
- else
- {
- /* reset the line as if we had not done anything */
- *input_line_pointer = c; /* put back the delimiting char */
- input_line_pointer = start; /* reset input_line pointer */
- return false;
+
+ return TRUE;
}
+
+ /* Reset the line as if we had not done anything. */
+ input_line_pointer = start;
+ return FALSE;
}
/* Summary of register_name().
- *
- * in: Input_line_pointer points to 1st char of operand.
- *
- * out: A expressionS.
- * The operand may have been a register: in this case, X_op == O_register,
- * X_add_number is set to the register number, and truth is returned.
- * Input_line_pointer->(next non-blank) char after operand, or is in
- * its original state.
- */
-static boolean
-address_register_name (expressionP)
- expressionS *expressionP;
+
+ in: Input_line_pointer points to 1st char of operand.
+
+ out: An expressionS.
+ The operand may have been a register: in this case, X_op == O_register,
+ X_add_number is set to the register number, and truth is returned.
+ Input_line_pointer->(next non-blank) char after operand, or is in
+ its original state. */
+
+static bfd_boolean
+address_register_name (expressionS *expressionP)
{
int reg_number;
char *name;
char *start;
char c;
- /* Find the spelling of the operand */
- start = name = input_line_pointer;
-
- c = get_symbol_end ();
+ /* Find the spelling of the operand. */
+ start = input_line_pointer;
+ c = get_symbol_name (&name);
reg_number = reg_name_search (address_registers, ADDRESS_REG_NAME_CNT, name);
- /* look to see if it's in the register table */
- if (reg_number >= 0)
+ /* Put back the delimiting char. */
+ (void) restore_line_pointer (c);
+
+ /* Look to see if it's in the register table. */
+ if (reg_number >= 0)
{
expressionP->X_op = O_register;
expressionP->X_add_number = reg_number;
- /* make the rest nice */
+ /* Make the rest nice. */
expressionP->X_add_symbol = NULL;
expressionP->X_op_symbol = NULL;
- *input_line_pointer = c; /* put back the delimiting char */
- return true;
- }
- else
- {
- /* reset the line as if we had not done anything */
- *input_line_pointer = c; /* put back the delimiting char */
- input_line_pointer = start; /* reset input_line pointer */
- return false;
+
+ return TRUE;
}
+
+ /* Reset the line as if we had not done anything. */
+ input_line_pointer = start;
+ return FALSE;
}
/* Summary of register_name().
- *
- * in: Input_line_pointer points to 1st char of operand.
- *
- * out: A expressionS.
- * The operand may have been a register: in this case, X_op == O_register,
- * X_add_number is set to the register number, and truth is returned.
- * Input_line_pointer->(next non-blank) char after operand, or is in
- * its original state.
- */
-static boolean
-other_register_name (expressionP)
- expressionS *expressionP;
+
+ in: Input_line_pointer points to 1st char of operand.
+
+ out: An expressionS.
+ The operand may have been a register: in this case, X_op == O_register,
+ X_add_number is set to the register number, and truth is returned.
+ Input_line_pointer->(next non-blank) char after operand, or is in
+ its original state. */
+
+static bfd_boolean
+other_register_name (expressionS *expressionP)
{
int reg_number;
char *name;
char *start;
char c;
- /* Find the spelling of the operand */
- start = name = input_line_pointer;
-
- c = get_symbol_end ();
+ /* Find the spelling of the operand. */
+ start = input_line_pointer;
+ c = get_symbol_name (&name);
reg_number = reg_name_search (other_registers, OTHER_REG_NAME_CNT, name);
- /* look to see if it's in the register table */
- if (reg_number >= 0)
+ /* Put back the delimiting char. */
+ (void) restore_line_pointer (c);
+
+ /* Look to see if it's in the register table. */
+ if (reg_number >= 0)
{
expressionP->X_op = O_register;
expressionP->X_add_number = reg_number;
- /* make the rest nice */
+ /* Make the rest nice. */
expressionP->X_add_symbol = NULL;
expressionP->X_op_symbol = NULL;
- *input_line_pointer = c; /* put back the delimiting char */
- return true;
- }
- else
- {
- /* reset the line as if we had not done anything */
- *input_line_pointer = c; /* put back the delimiting char */
- input_line_pointer = start; /* reset input_line pointer */
- return false;
+
+ return TRUE;
}
+
+ /* Reset the line as if we had not done anything. */
+ input_line_pointer = start;
+ return FALSE;
}
void
-md_show_usage (stream)
- FILE *stream;
+md_show_usage (FILE *stream)
{
- fprintf(stream, "MN10200 options:\n\
-none yet\n");
-}
+ fprintf (stream, _("MN10200 options:\n\
+none yet\n"));
+}
int
-md_parse_option (c, arg)
- int c;
- char *arg;
+md_parse_option (int c ATTRIBUTE_UNUSED,
+ const char *arg ATTRIBUTE_UNUSED)
{
return 0;
}
symbolS *
-md_undefined_symbol (name)
- char *name;
+md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
return 0;
}
-char *
-md_atof (type, litp, sizep)
- int type;
- char *litp;
- int *sizep;
+const char *
+md_atof (int type, char *litp, int *sizep)
{
- int prec;
- LITTLENUM_TYPE words[4];
- char *t;
- int i;
-
- switch (type)
- {
- case 'f':
- prec = 2;
- break;
+ return ieee_md_atof (type, litp, sizep, FALSE);
+}
- case 'd':
- prec = 4;
- break;
+void
+md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED,
+ asection *sec,
+ fragS *fragP)
+{
+ static unsigned long label_count = 0;
+ char buf[40];
- default:
- *sizep = 0;
- return "bad call to md_atof";
+ subseg_change (sec, 0);
+ if (fragP->fr_subtype == 0)
+ {
+ fix_new (fragP, fragP->fr_fix + 1, 1, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_8_PCREL);
+ fragP->fr_var = 0;
+ fragP->fr_fix += 2;
}
-
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- input_line_pointer = t;
+ else if (fragP->fr_subtype == 1)
+ {
+ /* Reverse the condition of the first branch. */
+ int offset = fragP->fr_fix;
+ int opcode = fragP->fr_literal[offset] & 0xff;
- *sizep = prec * 2;
+ switch (opcode)
+ {
+ case 0xe8:
+ opcode = 0xe9;
+ break;
+ case 0xe9:
+ opcode = 0xe8;
+ break;
+ case 0xe0:
+ opcode = 0xe2;
+ break;
+ case 0xe2:
+ opcode = 0xe0;
+ break;
+ case 0xe3:
+ opcode = 0xe1;
+ break;
+ case 0xe1:
+ opcode = 0xe3;
+ break;
+ case 0xe4:
+ opcode = 0xe6;
+ break;
+ case 0xe6:
+ opcode = 0xe4;
+ break;
+ case 0xe7:
+ opcode = 0xe5;
+ break;
+ case 0xe5:
+ opcode = 0xe7;
+ break;
+ default:
+ abort ();
+ }
+ fragP->fr_literal[offset] = opcode;
+
+ /* Create a fixup for the reversed conditional branch. */
+ sprintf (buf, ".%s_%ld", FAKE_LABEL_NAME, label_count++);
+ fix_new (fragP, fragP->fr_fix + 1, 1,
+ symbol_new (buf, sec, 0, fragP->fr_next),
+ fragP->fr_offset, 1, BFD_RELOC_8_PCREL);
+
+ /* Now create the unconditional branch + fixup to the
+ final target. */
+ fragP->fr_literal[offset + 2] = 0xfc;
+ fix_new (fragP, fragP->fr_fix + 3, 2, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_16_PCREL);
+ fragP->fr_var = 0;
+ fragP->fr_fix += 5;
+ }
+ else if (fragP->fr_subtype == 2)
+ {
+ /* Reverse the condition of the first branch. */
+ int offset = fragP->fr_fix;
+ int opcode = fragP->fr_literal[offset] & 0xff;
- for (i = prec - 1; i >= 0; i--)
+ switch (opcode)
+ {
+ case 0xe8:
+ opcode = 0xe9;
+ break;
+ case 0xe9:
+ opcode = 0xe8;
+ break;
+ case 0xe0:
+ opcode = 0xe2;
+ break;
+ case 0xe2:
+ opcode = 0xe0;
+ break;
+ case 0xe3:
+ opcode = 0xe1;
+ break;
+ case 0xe1:
+ opcode = 0xe3;
+ break;
+ case 0xe4:
+ opcode = 0xe6;
+ break;
+ case 0xe6:
+ opcode = 0xe4;
+ break;
+ case 0xe7:
+ opcode = 0xe5;
+ break;
+ case 0xe5:
+ opcode = 0xe7;
+ break;
+ default:
+ abort ();
+ }
+ fragP->fr_literal[offset] = opcode;
+
+ /* Create a fixup for the reversed conditional branch. */
+ sprintf (buf, ".%s_%ld", FAKE_LABEL_NAME, label_count++);
+ fix_new (fragP, fragP->fr_fix + 1, 1,
+ symbol_new (buf, sec, 0, fragP->fr_next),
+ fragP->fr_offset, 1, BFD_RELOC_8_PCREL);
+
+ /* Now create the unconditional branch + fixup to the
+ final target. */
+ fragP->fr_literal[offset + 2] = 0xf4;
+ fragP->fr_literal[offset + 3] = 0xe0;
+ fix_new (fragP, fragP->fr_fix + 4, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_24_PCREL);
+ fragP->fr_var = 0;
+ fragP->fr_fix += 7;
+ }
+ else if (fragP->fr_subtype == 3)
{
- md_number_to_chars (litp, (valueT) words[i], 2);
- litp += 2;
+ fix_new (fragP, fragP->fr_fix + 2, 1, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_8_PCREL);
+ fragP->fr_var = 0;
+ fragP->fr_fix += 3;
}
+ else if (fragP->fr_subtype == 4)
+ {
+ /* Reverse the condition of the first branch. */
+ int offset = fragP->fr_fix;
+ int opcode = fragP->fr_literal[offset + 1] & 0xff;
- return NULL;
-}
+ switch (opcode)
+ {
+ case 0xfc:
+ opcode = 0xfd;
+ break;
+ case 0xfd:
+ opcode = 0xfc;
+ break;
+ case 0xfe:
+ opcode = 0xff;
+ break;
+ case 0xff:
+ opcode = 0xfe;
+ break;
+ case 0xe8:
+ opcode = 0xe9;
+ break;
+ case 0xe9:
+ opcode = 0xe8;
+ break;
+ case 0xe0:
+ opcode = 0xe2;
+ break;
+ case 0xe2:
+ opcode = 0xe0;
+ break;
+ case 0xe3:
+ opcode = 0xe1;
+ break;
+ case 0xe1:
+ opcode = 0xe3;
+ break;
+ case 0xe4:
+ opcode = 0xe6;
+ break;
+ case 0xe6:
+ opcode = 0xe4;
+ break;
+ case 0xe7:
+ opcode = 0xe5;
+ break;
+ case 0xe5:
+ opcode = 0xe7;
+ break;
+ case 0xec:
+ opcode = 0xed;
+ break;
+ case 0xed:
+ opcode = 0xec;
+ break;
+ case 0xee:
+ opcode = 0xef;
+ break;
+ case 0xef:
+ opcode = 0xee;
+ break;
+ default:
+ abort ();
+ }
+ fragP->fr_literal[offset + 1] = opcode;
+
+ /* Create a fixup for the reversed conditional branch. */
+ sprintf (buf, ".%s_%ld", FAKE_LABEL_NAME, label_count++);
+ fix_new (fragP, fragP->fr_fix + 2, 1,
+ symbol_new (buf, sec, 0, fragP->fr_next),
+ fragP->fr_offset, 1, BFD_RELOC_8_PCREL);
+
+ /* Now create the unconditional branch + fixup to the
+ final target. */
+ fragP->fr_literal[offset + 3] = 0xfc;
+ fix_new (fragP, fragP->fr_fix + 4, 2, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_16_PCREL);
+ fragP->fr_var = 0;
+ fragP->fr_fix += 6;
+ }
+ else if (fragP->fr_subtype == 5)
+ {
+ /* Reverse the condition of the first branch. */
+ int offset = fragP->fr_fix;
+ int opcode = fragP->fr_literal[offset + 1] & 0xff;
+ switch (opcode)
+ {
+ case 0xfc:
+ opcode = 0xfd;
+ break;
+ case 0xfd:
+ opcode = 0xfc;
+ break;
+ case 0xfe:
+ opcode = 0xff;
+ break;
+ case 0xff:
+ opcode = 0xfe;
+ break;
+ case 0xe8:
+ opcode = 0xe9;
+ break;
+ case 0xe9:
+ opcode = 0xe8;
+ break;
+ case 0xe0:
+ opcode = 0xe2;
+ break;
+ case 0xe2:
+ opcode = 0xe0;
+ break;
+ case 0xe3:
+ opcode = 0xe1;
+ break;
+ case 0xe1:
+ opcode = 0xe3;
+ break;
+ case 0xe4:
+ opcode = 0xe6;
+ break;
+ case 0xe6:
+ opcode = 0xe4;
+ break;
+ case 0xe7:
+ opcode = 0xe5;
+ break;
+ case 0xe5:
+ opcode = 0xe7;
+ break;
+ case 0xec:
+ opcode = 0xed;
+ break;
+ case 0xed:
+ opcode = 0xec;
+ break;
+ case 0xee:
+ opcode = 0xef;
+ break;
+ case 0xef:
+ opcode = 0xee;
+ break;
+ default:
+ abort ();
+ }
+ fragP->fr_literal[offset + 1] = opcode;
+
+ /* Create a fixup for the reversed conditional branch. */
+ sprintf (buf, ".%s_%ld", FAKE_LABEL_NAME, label_count++);
+ fix_new (fragP, fragP->fr_fix + 2, 1,
+ symbol_new (buf, sec, 0, fragP->fr_next),
+ fragP->fr_offset, 1, BFD_RELOC_8_PCREL);
+
+ /* Now create the unconditional branch + fixup to the
+ final target. */
+ fragP->fr_literal[offset + 3] = 0xf4;
+ fragP->fr_literal[offset + 4] = 0xe0;
+ fix_new (fragP, fragP->fr_fix + 5, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_24_PCREL);
+ fragP->fr_var = 0;
+ fragP->fr_fix += 8;
+ }
+ else if (fragP->fr_subtype == 6)
+ {
+ fix_new (fragP, fragP->fr_fix + 1, 2, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_16_PCREL);
+ fragP->fr_var = 0;
+ fragP->fr_fix += 3;
+ }
+ else if (fragP->fr_subtype == 7)
+ {
+ int offset = fragP->fr_fix;
+ fragP->fr_literal[offset] = 0xf4;
+ fragP->fr_literal[offset + 1] = 0xe1;
+
+ fix_new (fragP, fragP->fr_fix + 2, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_24_PCREL);
+ fragP->fr_var = 0;
+ fragP->fr_fix += 5;
+ }
+ else if (fragP->fr_subtype == 8)
+ {
+ fragP->fr_literal[fragP->fr_fix] = 0xea;
+ fix_new (fragP, fragP->fr_fix + 1, 1, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_8_PCREL);
+ fragP->fr_var = 0;
+ fragP->fr_fix += 2;
+ }
+ else if (fragP->fr_subtype == 9)
+ {
+ int offset = fragP->fr_fix;
+ fragP->fr_literal[offset] = 0xfc;
-void
-md_convert_frag (abfd, sec, fragP)
- bfd *abfd;
- asection *sec;
- fragS *fragP;
-{
- /* printf ("call to md_convert_frag \n"); */
- abort ();
+ fix_new (fragP, fragP->fr_fix + 1, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_16_PCREL);
+ fragP->fr_var = 0;
+ fragP->fr_fix += 3;
+ }
+ else if (fragP->fr_subtype == 10)
+ {
+ int offset = fragP->fr_fix;
+ fragP->fr_literal[offset] = 0xf4;
+ fragP->fr_literal[offset + 1] = 0xe0;
+
+ fix_new (fragP, fragP->fr_fix + 2, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_24_PCREL);
+ fragP->fr_var = 0;
+ fragP->fr_fix += 5;
+ }
+ else
+ abort ();
}
valueT
-md_section_align (seg, addr)
- asection *seg;
- valueT addr;
+md_section_align (asection *seg, valueT addr)
{
- int align = bfd_get_section_alignment (stdoutput, seg);
- return ((addr + (1 << align) - 1) & (-1 << align));
+ int align = bfd_section_alignment (seg);
+ return ((addr + (1 << align) - 1) & -(1 << align));
}
void
-md_begin ()
+md_begin (void)
{
- char *prev_name = "";
- register const struct mn10200_opcode *op;
+ const char *prev_name = "";
+ const struct mn10200_opcode *op;
- mn10200_hash = hash_new();
+ mn10200_hash = hash_new ();
/* Insert unique names into hash table. The MN10200 instruction set
has many identical opcode names that have different opcodes based
op = mn10200_opcodes;
while (op->name)
{
- if (strcmp (prev_name, op->name))
+ if (strcmp (prev_name, op->name))
{
prev_name = (char *) op->name;
hash_insert (mn10200_hash, op->name, (char *) op);
linkrelax = 1;
}
+static unsigned long
+check_operand (unsigned long insn ATTRIBUTE_UNUSED,
+ const struct mn10200_operand *operand,
+ offsetT val)
+{
+ /* No need to check 24bit or 32bit operands for a bit. */
+ if (operand->bits < 24
+ && (operand->flags & MN10200_OPERAND_NOCHECK) == 0)
+ {
+ long min, max;
+ offsetT test;
+
+ if ((operand->flags & MN10200_OPERAND_SIGNED) != 0)
+ {
+ max = (1 << (operand->bits - 1)) - 1;
+ min = - (1 << (operand->bits - 1));
+ }
+ else
+ {
+ max = (1 << operand->bits) - 1;
+ min = 0;
+ }
+
+ test = val;
+
+ if (test < (offsetT) min || test > (offsetT) max)
+ return 0;
+ else
+ return 1;
+ }
+ return 1;
+}
+/* If while processing a fixup, a reloc really needs to be created
+ Then it is done here. */
+
+arelent *
+tc_gen_reloc (asection *seg ATTRIBUTE_UNUSED, fixS *fixp)
+{
+ arelent *reloc;
+ reloc = XNEW (arelent);
+
+ if (fixp->fx_subsy != NULL)
+ {
+ if (S_GET_SEGMENT (fixp->fx_addsy) == S_GET_SEGMENT (fixp->fx_subsy)
+ && S_IS_DEFINED (fixp->fx_subsy))
+ {
+ fixp->fx_offset -= S_GET_VALUE (fixp->fx_subsy);
+ fixp->fx_subsy = NULL;
+ }
+ else
+ /* FIXME: We should try more ways to resolve difference expressions
+ here. At least this is better than silently ignoring the
+ subtrahend. */
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("can't resolve `%s' {%s section} - `%s' {%s section}"),
+ fixp->fx_addsy ? S_GET_NAME (fixp->fx_addsy) : "0",
+ segment_name (fixp->fx_addsy
+ ? S_GET_SEGMENT (fixp->fx_addsy)
+ : absolute_section),
+ S_GET_NAME (fixp->fx_subsy),
+ segment_name (S_GET_SEGMENT (fixp->fx_addsy)));
+ }
+
+ reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
+ if (reloc->howto == NULL)
+ {
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("reloc %d not supported by object file format"),
+ (int) fixp->fx_r_type);
+ return NULL;
+ }
+ reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
+ reloc->sym_ptr_ptr = XNEW (asymbol *);
+ *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
+ reloc->addend = fixp->fx_offset;
+ return reloc;
+}
+
+int
+md_estimate_size_before_relax (fragS *fragp, asection *seg)
+{
+ if (fragp->fr_subtype == 6
+ && (!S_IS_DEFINED (fragp->fr_symbol)
+ || seg != S_GET_SEGMENT (fragp->fr_symbol)))
+ fragp->fr_subtype = 7;
+ else if (fragp->fr_subtype == 8
+ && (!S_IS_DEFINED (fragp->fr_symbol)
+ || seg != S_GET_SEGMENT (fragp->fr_symbol)))
+ fragp->fr_subtype = 10;
+
+ if (fragp->fr_subtype >= sizeof (md_relax_table) / sizeof (md_relax_table[0]))
+ abort ();
+
+ return md_relax_table[fragp->fr_subtype].rlx_length;
+}
+
+long
+md_pcrel_from (fixS *fixp)
+{
+ return fixp->fx_frag->fr_address;
+}
+
void
-md_assemble (str)
- char *str;
+md_apply_fix (fixS * fixP, valueT * valP ATTRIBUTE_UNUSED, segT seg ATTRIBUTE_UNUSED)
+{
+ /* We shouldn't ever get here because linkrelax is nonzero. */
+ abort ();
+ fixP->fx_done = 1;
+}
+
+/* Insert an operand value into an instruction. */
+
+static void
+mn10200_insert_operand (unsigned long *insnp,
+ unsigned long *extensionp,
+ const struct mn10200_operand *operand,
+ offsetT val,
+ char *file,
+ unsigned int line,
+ unsigned int shift)
+{
+ /* No need to check 24 or 32bit operands for a bit. */
+ if (operand->bits < 24
+ && (operand->flags & MN10200_OPERAND_NOCHECK) == 0)
+ {
+ long min, max;
+ offsetT test;
+
+ if ((operand->flags & MN10200_OPERAND_SIGNED) != 0)
+ {
+ max = (1 << (operand->bits - 1)) - 1;
+ min = - (1 << (operand->bits - 1));
+ }
+ else
+ {
+ max = (1 << operand->bits) - 1;
+ min = 0;
+ }
+
+ test = val;
+
+ if (test < (offsetT) min || test > (offsetT) max)
+ as_warn_value_out_of_range (_("operand"), test, (offsetT) min, (offsetT) max, file, line);
+ }
+
+ if ((operand->flags & MN10200_OPERAND_EXTENDED) == 0)
+ {
+ *insnp |= (((long) val & ((1 << operand->bits) - 1))
+ << (operand->shift + shift));
+
+ if ((operand->flags & MN10200_OPERAND_REPEATED) != 0)
+ *insnp |= (((long) val & ((1 << operand->bits) - 1))
+ << (operand->shift + shift + 2));
+ }
+ else
+ {
+ *extensionp |= (val >> 16) & 0xff;
+ *insnp |= val & 0xffff;
+ }
+}
+
+void
+md_assemble (char *str)
{
char *s;
struct mn10200_opcode *opcode;
struct mn10200_opcode *next_opcode;
const unsigned char *opindex_ptr;
- int next_opindex;
+ int next_opindex, relaxable;
unsigned long insn, extension, size = 0;
char *f;
int i;
int match;
/* Get the opcode. */
- for (s = str; *s != '\0' && ! isspace (*s); s++)
+ for (s = str; *s != '\0' && !ISSPACE (*s); s++)
;
if (*s != '\0')
*s++ = '\0';
- /* find the first opcode with the proper name */
- opcode = (struct mn10200_opcode *)hash_find (mn10200_hash, str);
+ /* Find the first opcode with the proper name. */
+ opcode = (struct mn10200_opcode *) hash_find (mn10200_hash, str);
if (opcode == NULL)
{
- as_bad ("Unrecognized opcode: `%s'", str);
+ as_bad (_("Unrecognized opcode: `%s'"), str);
return;
}
str = s;
- while (isspace (*str))
+ while (ISSPACE (*str))
++str;
input_line_pointer = str;
- for(;;)
+ for (;;)
{
const char *errmsg = NULL;
int op_idx;
char *hold;
int extra_shift = 0;
+ relaxable = 0;
fc = 0;
match = 0;
next_opindex = 0;
while (*str == ' ' || *str == ',')
++str;
- /* Gather the operand. */
+ if (operand->flags & MN10200_OPERAND_RELAX)
+ relaxable = 1;
+
+ /* Gather the operand. */
hold = input_line_pointer;
input_line_pointer = str;
}
else if (operand->flags & MN10200_OPERAND_PSW)
{
- char *start = input_line_pointer;
- char c = get_symbol_end ();
+ char *start;
+ char c = get_symbol_name (&start);
if (strcmp (start, "psw") != 0)
{
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
input_line_pointer = hold;
str = hold;
goto error;
}
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
goto keep_going;
}
else if (operand->flags & MN10200_OPERAND_MDR)
{
- char *start = input_line_pointer;
- char c = get_symbol_end ();
+ char *start;
+ char c = get_symbol_name (&start);
if (strcmp (start, "mdr") != 0)
{
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
input_line_pointer = hold;
str = hold;
goto error;
}
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
goto keep_going;
}
else if (data_register_name (&ex))
expression (&ex);
}
- switch (ex.X_op)
+ switch (ex.X_op)
{
case O_illegal:
- errmsg = "illegal operand";
+ errmsg = _("illegal operand");
goto error;
case O_absent:
- errmsg = "missing operand";
+ errmsg = _("missing operand");
goto error;
case O_register:
if ((operand->flags
- & (MN10200_OPERAND_DREG | MN10200_OPERAND_AREG)) == 0)
+ & (MN10200_OPERAND_DREG | MN10200_OPERAND_AREG)) == 0)
{
input_line_pointer = hold;
str = hold;
goto error;
}
-
+
if (opcode->format == FMT_2 || opcode->format == FMT_5)
extra_shift = 8;
else if (opcode->format == FMT_3 || opcode->format == FMT_6
extra_shift = 16;
else
extra_shift = 0;
-
+
mn10200_insert_operand (&insn, &extension, operand,
- ex.X_add_number, (char *) NULL,
+ ex.X_add_number, NULL,
0, extra_shift);
break;
/* If this operand can be promoted, and it doesn't
fit into the allocated bitfield for this insn,
then promote it (ie this opcode does not match). */
- if (operand->flags & MN10200_OPERAND_PROMOTE
- && ! check_operand (insn, operand, ex.X_add_number))
+ if (operand->flags
+ & (MN10200_OPERAND_PROMOTE | MN10200_OPERAND_RELAX)
+ && !check_operand (insn, operand, ex.X_add_number))
{
input_line_pointer = hold;
str = hold;
}
mn10200_insert_operand (&insn, &extension, operand,
- ex.X_add_number, (char *) NULL,
+ ex.X_add_number, NULL,
0, 0);
break;
/* We need to generate a fixup for this expression. */
if (fc >= MAX_INSN_FIXUPS)
- as_fatal ("too many fixups");
+ as_fatal (_("too many fixups"));
fixups[fc].exp = ex;
fixups[fc].opindex = *opindex_ptr;
fixups[fc].reloc = BFD_RELOC_UNUSED;
break;
}
-keep_going:
+ keep_going:
str = input_line_pointer;
input_line_pointer = hold;
error:
if (match == 0)
- {
+ {
next_opcode = opcode + 1;
- if (!strcmp(next_opcode->name, opcode->name))
+ if (!strcmp (next_opcode->name, opcode->name))
{
opcode = next_opcode;
continue;
}
-
+
as_bad ("%s", errmsg);
return;
- }
+ }
break;
}
-
- while (isspace (*str))
+
+ while (ISSPACE (*str))
++str;
if (*str != '\0')
- as_bad ("junk at end of line: `%s'", str);
+ as_bad (_("junk at end of line: `%s'"), str);
input_line_pointer = str;
size = 5;
else
abort ();
-
- /* Write out the instruction. */
- f = frag_more (size);
-
- /* Oh, what a mess. The instruction is in big endian format, but
- 16 and 24bit immediates are little endian! */
- if (opcode->format == FMT_3)
- {
- number_to_chars_bigendian (f, (insn >> 16) & 0xff, 1);
- number_to_chars_littleendian (f + 1, insn & 0xffff, 2);
- }
- else if (opcode->format == FMT_6)
- {
- number_to_chars_bigendian (f, (insn >> 16) & 0xffff, 2);
- number_to_chars_littleendian (f + 2, insn & 0xffff, 2);
- }
- else if (opcode->format == FMT_7)
- {
- number_to_chars_bigendian (f, (insn >> 16) & 0xffff, 2);
- number_to_chars_littleendian (f + 2, insn & 0xffff, 2);
- number_to_chars_littleendian (f + 4, extension & 0xff, 1);
- }
- else
- {
- number_to_chars_bigendian (f, insn, size > 4 ? 4 : size);
- }
-
-#if 0
- /* Create any fixups. */
- for (i = 0; i < fc; i++)
+ /* Write out the instruction. */
+ dwarf2_emit_insn (size);
+ if (relaxable && fc > 0)
{
- const struct mn10200_operand *operand;
-
- operand = &mn10200_operands[fixups[i].opindex];
- if (fixups[i].reloc != BFD_RELOC_UNUSED)
+ /* On a 64-bit host the size of an 'int' is not the same
+ as the size of a pointer, so we need a union to convert
+ the opindex field of the fr_cgen structure into a char *
+ so that it can be stored in the frag. We do not have
+ to worry about losing accuracy as we are not going to
+ be even close to the 32bit limit of the int. */
+ union
+ {
+ int opindex;
+ char * ptr;
+ }
+ opindex_converter;
+ int type;
+
+ /* bCC */
+ if (size == 2 && opcode->opcode != 0xfc0000)
{
- reloc_howto_type *reloc_howto;
- int size;
- int offset;
- fixS *fixP;
-
- reloc_howto = bfd_reloc_type_lookup (stdoutput, fixups[i].reloc);
-
- if (!reloc_howto)
- abort();
-
- size = bfd_get_reloc_size (reloc_howto);
-
- if (size < 1 || size > 4)
- abort();
-
- offset = 4 - size;
- fixP = fix_new_exp (frag_now, f - frag_now->fr_literal + offset, size,
- &fixups[i].exp,
- reloc_howto->pc_relative,
- fixups[i].reloc);
+ /* Handle bra specially. Basically treat it like jmp so
+ that we automatically handle 8, 16 and 32 bit offsets
+ correctly as well as jumps to an undefined address.
+
+ It is also important to not treat it like other bCC
+ instructions since the long forms of bra is different
+ from other bCC instructions. */
+ if (opcode->opcode == 0xea00)
+ type = 8;
+ else
+ type = 0;
}
+ /* jsr */
+ else if (size == 3 && opcode->opcode == 0xfd0000)
+ type = 6;
+ /* jmp */
+ else if (size == 3 && opcode->opcode == 0xfc0000)
+ type = 8;
+ /* bCCx */
else
+ type = 3;
+
+ opindex_converter.opindex = fixups[0].opindex;
+ f = frag_var (rs_machine_dependent, 8, 8 - size, type,
+ fixups[0].exp.X_add_symbol,
+ fixups[0].exp.X_add_number,
+ opindex_converter.ptr);
+ number_to_chars_bigendian (f, insn, size);
+ if (8 - size > 4)
{
- int reloc, pcrel, reloc_size, offset;
-
- reloc = BFD_RELOC_NONE;
- /* How big is the reloc? Remember SPLIT relocs are
- implicitly 32bits. */
- reloc_size = operand->bits;
-
- /* Is the reloc pc-relative? */
- pcrel = (operand->flags & MN10200_OPERAND_PCREL) != 0;
-
- /* Gross. This disgusting hack is to make sure we
- get the right offset for the 16/32 bit reloc in
- "call" instructions. Basically they're a pain
- because the reloc isn't at the end of the instruction. */
- if ((size == 5 || size == 7)
- && (((insn >> 24) & 0xff) == 0xcd
- || ((insn >> 24) & 0xff) == 0xdd))
- size -= 2;
-
- /* Similarly for certain bit instructions which don't
- hav their 32bit reloc at the tail of the instruction. */
- if (size == 7
- && (((insn >> 16) & 0xffff) == 0xfe00
- || ((insn >> 16) & 0xffff) == 0xfe01
- || ((insn >> 16) & 0xffff) == 0xfe02))
- size -= 1;
-
- offset = size - reloc_size / 8;
-
- /* Choose a proper BFD relocation type. */
- if (pcrel)
- {
- if (size == 6)
- reloc = BFD_RELOC_MN10200_32_PCREL;
- else if (size == 4)
- reloc = BFD_RELOC_MN10200_16_PCREL;
- else if (reloc_size == 32)
- reloc = BFD_RELOC_32_PCREL;
- else if (reloc_size == 16)
- reloc = BFD_RELOC_16_PCREL;
- else if (reloc_size == 8)
- reloc = BFD_RELOC_8_PCREL;
- else
- abort ();
- }
- else
- {
- if (reloc_size == 32)
- reloc = BFD_RELOC_MN10200_32B;
- else if (reloc_size == 16)
- reloc = BFD_RELOC_MN10200_16B;
- else if (reloc_size == 8)
- reloc = BFD_RELOC_8;
- else
- abort ();
- }
-
- /* Convert the size of the reloc into what fix_new_exp wants. */
- reloc_size = reloc_size / 8;
- if (reloc_size == 8)
- reloc_size = 0;
- else if (reloc_size == 16)
- reloc_size = 1;
- else if (reloc_size == 32)
- reloc_size = 2;
-
- fix_new_exp (frag_now, f - frag_now->fr_literal + offset, reloc_size,
- &fixups[i].exp, pcrel,
- ((bfd_reloc_code_real_type) reloc));
+ number_to_chars_bigendian (f + size, 0, 4);
+ number_to_chars_bigendian (f + size + 4, 0, 8 - size - 4);
}
+ else
+ number_to_chars_bigendian (f + size, 0, 8 - size);
}
-#endif
-}
-
-
-/* if while processing a fixup, a reloc really needs to be created */
-/* then it is done here */
-
-arelent *
-tc_gen_reloc (seg, fixp)
- asection *seg;
- fixS *fixp;
-{
- arelent *reloc;
- reloc = (arelent *) bfd_alloc_by_size_t (stdoutput, sizeof (arelent));
- reloc->sym_ptr_ptr = &fixp->fx_addsy->bsym;
- reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
- reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
- if (reloc->howto == (reloc_howto_type *) NULL)
- {
- as_bad_where (fixp->fx_file, fixp->fx_line,
- "reloc %d not supported by object file format", (int)fixp->fx_r_type);
- return NULL;
- }
- reloc->addend = fixp->fx_offset;
- /* printf("tc_gen_reloc: addr=%x addend=%x\n", reloc->address, reloc->addend); */
- return reloc;
-}
-
-int
-md_estimate_size_before_relax (fragp, seg)
- fragS *fragp;
- asection *seg;
-{
- return 0;
-}
-
-long
-md_pcrel_from (fixp)
- fixS *fixp;
-{
- return fixp->fx_frag->fr_address;
-#if 0
- if (fixp->fx_addsy != (symbolS *) NULL && ! S_IS_DEFINED (fixp->fx_addsy))
- {
- /* The symbol is undefined. Let the linker figure it out. */
- return 0;
- }
- return fixp->fx_frag->fr_address + fixp->fx_where;
-#endif
-}
-
-int
-md_apply_fix3 (fixp, valuep, seg)
- fixS *fixp;
- valueT *valuep;
- segT seg;
-{
- /* We shouldn't ever get here because linkrelax is nonzero. */
- abort ();
- fixp->fx_done = 1;
- return 0;
-}
-
-/* Insert an operand value into an instruction. */
-
-static void
-mn10200_insert_operand (insnp, extensionp, operand, val, file, line, shift)
- unsigned long *insnp;
- unsigned long *extensionp;
- const struct mn10200_operand *operand;
- offsetT val;
- char *file;
- unsigned int line;
- unsigned int shift;
-{
- /* No need to check 24 or 32bit operands for a bit. */
- if (operand->bits < 24)
+ else
{
- long min, max;
- offsetT test;
+ f = frag_more (size);
- if ((operand->flags & MN10200_OPERAND_SIGNED) != 0)
+ /* Oh, what a mess. The instruction is in big endian format, but
+ 16 and 24bit immediates are little endian! */
+ if (opcode->format == FMT_3)
{
- max = (1 << (operand->bits - 1)) - 1;
- min = - (1 << (operand->bits - 1));
+ number_to_chars_bigendian (f, (insn >> 16) & 0xff, 1);
+ number_to_chars_littleendian (f + 1, insn & 0xffff, 2);
+ }
+ else if (opcode->format == FMT_6)
+ {
+ number_to_chars_bigendian (f, (insn >> 16) & 0xffff, 2);
+ number_to_chars_littleendian (f + 2, insn & 0xffff, 2);
+ }
+ else if (opcode->format == FMT_7)
+ {
+ number_to_chars_bigendian (f, (insn >> 16) & 0xffff, 2);
+ number_to_chars_littleendian (f + 2, insn & 0xffff, 2);
+ number_to_chars_littleendian (f + 4, extension & 0xff, 1);
}
else
- {
- max = (1 << operand->bits) - 1;
- min = 0;
- }
+ number_to_chars_bigendian (f, insn, size > 4 ? 4 : size);
- test = val;
+ /* Create any fixups. */
+ for (i = 0; i < fc; i++)
+ {
+ const struct mn10200_operand *operand;
+ int reloc_size;
+ operand = &mn10200_operands[fixups[i].opindex];
+ if (fixups[i].reloc != BFD_RELOC_UNUSED)
+ {
+ reloc_howto_type *reloc_howto;
+ int offset;
+ fixS *fixP;
- if (test < (offsetT) min || test > (offsetT) max)
- {
- const char *err =
- "operand out of range (%s not between %ld and %ld)";
- char buf[100];
-
- sprint_value (buf, test);
- if (file == (char *) NULL)
- as_warn (err, buf, min, max);
- else
- as_warn_where (file, line, err, buf, min, max);
- }
- }
+ reloc_howto = bfd_reloc_type_lookup (stdoutput,
+ fixups[i].reloc);
- if ((operand->flags & MN10200_OPERAND_EXTENDED) == 0)
- {
- *insnp |= (((long) val & ((1 << operand->bits) - 1))
- << (operand->shift + shift));
+ if (!reloc_howto)
+ abort ();
- if ((operand->flags & MN10200_OPERAND_REPEATED) != 0)
- *insnp |= (((long) val & ((1 << operand->bits) - 1))
- << (operand->shift + shift + 2));
- }
- else
- {
- *extensionp |= (val >> 16) & 0xff;
- *insnp |= val & 0xffff;
- }
-}
+ reloc_size = bfd_get_reloc_size (reloc_howto);
-static unsigned long
-check_operand (insn, operand, val)
- unsigned long insn;
- const struct mn10200_operand *operand;
- offsetT val;
-{
- /* No need to check 24bit or 32bit operands for a bit. */
- if (operand->bits < 24)
- {
- long min, max;
- offsetT test;
+ if (reloc_size < 1 || reloc_size > 4)
+ abort ();
- if ((operand->flags & MN10200_OPERAND_SIGNED) != 0)
- {
- max = (1 << (operand->bits - 1)) - 1;
- min = - (1 << (operand->bits - 1));
- }
- else
- {
- max = (1 << operand->bits) - 1;
- min = 0;
- }
+ offset = 4 - reloc_size;
+ fixP = fix_new_exp (frag_now, f - frag_now->fr_literal + offset,
+ reloc_size,
+ &fixups[i].exp,
+ reloc_howto->pc_relative,
+ fixups[i].reloc);
+
+ /* PC-relative offsets are from the first byte of the
+ next instruction, not from the start of the current
+ instruction. */
+ if (reloc_howto->pc_relative)
+ fixP->fx_offset += reloc_size;
+ }
+ else
+ {
+ int reloc, pcrel, offset;
+ fixS *fixP;
- test = val;
+ reloc = BFD_RELOC_NONE;
+ /* How big is the reloc? Remember SPLIT relocs are
+ implicitly 32bits. */
+ reloc_size = operand->bits;
+ offset = size - reloc_size / 8;
- if (test < (offsetT) min || test > (offsetT) max)
- return 0;
- else
- return 1;
+ /* Is the reloc pc-relative? */
+ pcrel = (operand->flags & MN10200_OPERAND_PCREL) != 0;
+
+ /* Choose a proper BFD relocation type. */
+ if (pcrel)
+ {
+ if (reloc_size == 8)
+ reloc = BFD_RELOC_8_PCREL;
+ else if (reloc_size == 24)
+ reloc = BFD_RELOC_24_PCREL;
+ else
+ abort ();
+ }
+ else
+ {
+ if (reloc_size == 32)
+ reloc = BFD_RELOC_32;
+ else if (reloc_size == 16)
+ reloc = BFD_RELOC_16;
+ else if (reloc_size == 8)
+ reloc = BFD_RELOC_8;
+ else if (reloc_size == 24)
+ reloc = BFD_RELOC_24;
+ else
+ abort ();
+ }
+
+ /* Convert the size of the reloc into what fix_new_exp
+ wants. */
+ reloc_size = reloc_size / 8;
+ if (reloc_size == 8)
+ reloc_size = 0;
+ else if (reloc_size == 16)
+ reloc_size = 1;
+ else if (reloc_size == 32 || reloc_size == 24)
+ reloc_size = 2;
+
+ fixP = fix_new_exp (frag_now, f - frag_now->fr_literal + offset,
+ reloc_size, &fixups[i].exp, pcrel,
+ ((bfd_reloc_code_real_type) reloc));
+
+ /* PC-relative offsets are from the first byte of the
+ next instruction, not from the start of the current
+ instruction. */
+ if (pcrel)
+ fixP->fx_offset += size;
+ }
+ }
}
- return 1;
}
projects / deliverable / binutils-gdb.git / blobdiff