/* tc-mn10300.c -- Assembler code for the Matsushita 10300
- Copyright 1996, 1997, 1998, 1999, 2000, 2001
+ Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
Boston, MA 02111-1307, USA. */
#include <stdio.h>
-#include <ctype.h>
#include "as.h"
+#include "safe-ctype.h"
#include "subsegs.h"
#include "opcode/mn10300.h"
#include "dwarf2dbg.h"
const struct mn10300_operand *,
offsetT));
static int reg_name_search PARAMS ((const struct reg_name *, int, const char *));
-static boolean data_register_name PARAMS ((expressionS *expressionP));
-static boolean address_register_name PARAMS ((expressionS *expressionP));
-static boolean other_register_name PARAMS ((expressionS *expressionP));
-static void set_arch_mach PARAMS ((int));
+static bfd_boolean data_register_name PARAMS ((expressionS *expressionP));
+static bfd_boolean address_register_name PARAMS ((expressionS *expressionP));
+static bfd_boolean other_register_name PARAMS ((expressionS *expressionP));
+static void set_arch_mach PARAMS ((unsigned int));
/* Set linkrelax here to avoid fixups in most sections. */
int linkrelax = 1;
/* The target specific pseudo-ops which we support. */
const pseudo_typeS md_pseudo_table[] =
{
- { "file", dwarf2_directive_file, 0 },
+ { "file", (void (*) PARAMS ((int))) dwarf2_directive_file, 0 },
{ "loc", dwarf2_directive_loc, 0 },
{ "am30", set_arch_mach, AM30 },
{ "am33", set_arch_mach, AM33 },
{ "mcrl", 3 },
{ "mcvf", 4 },
{ "mdrq", 1 },
- { "pc", 0 },
{ "sp", 0 },
{ "xr0", 0 },
{ "xr1", 1 },
#define XR_REG_NAME_CNT \
(sizeof (xr_registers) / sizeof (struct reg_name))
+/* We abuse the `value' field, that would be otherwise unused, to
+ encode the architecture on which (access to) the register was
+ introduced. FIXME: we should probably warn when we encounter a
+ register name when assembling for an architecture that doesn't
+ support it, before parsing it as a symbol name. */
static const struct reg_name other_registers[] =
{
+ { "epsw", AM33 },
{ "mdr", 0 },
+ { "pc", AM33 },
{ "psw", 0 },
{ "sp", 0 },
};
*
* in: Input_line_pointer points to 1st char of operand.
*
- * out: A expressionS.
+ * out: An expressionS.
* The operand may have been a register: in this case, X_op == O_register,
* X_add_number is set to the register number, and truth is returned.
* Input_line_pointer->(next non-blank) char after operand, or is in
* its original state.
*/
-static boolean
+static bfd_boolean
r_register_name (expressionP)
expressionS *expressionP;
{
expressionP->X_add_symbol = NULL;
expressionP->X_op_symbol = NULL;
- return true;
+ return TRUE;
}
/* Reset the line as if we had not done anything. */
input_line_pointer = start;
- return false;
+ return FALSE;
}
/* Summary of register_name().
*
* in: Input_line_pointer points to 1st char of operand.
*
- * out: A expressionS.
+ * out: An expressionS.
* The operand may have been a register: in this case, X_op == O_register,
* X_add_number is set to the register number, and truth is returned.
* Input_line_pointer->(next non-blank) char after operand, or is in
* its original state.
*/
-static boolean
+static bfd_boolean
xr_register_name (expressionP)
expressionS *expressionP;
{
expressionP->X_add_symbol = NULL;
expressionP->X_op_symbol = NULL;
- return true;
+ return TRUE;
}
/* Reset the line as if we had not done anything. */
input_line_pointer = start;
- return false;
+ return FALSE;
}
/* Summary of register_name().
*
* in: Input_line_pointer points to 1st char of operand.
*
- * out: A expressionS.
+ * out: An expressionS.
* The operand may have been a register: in this case, X_op == O_register,
* X_add_number is set to the register number, and truth is returned.
* Input_line_pointer->(next non-blank) char after operand, or is in
* its original state.
*/
-static boolean
+static bfd_boolean
data_register_name (expressionP)
expressionS *expressionP;
{
expressionP->X_add_symbol = NULL;
expressionP->X_op_symbol = NULL;
- return true;
+ return TRUE;
}
/* Reset the line as if we had not done anything. */
input_line_pointer = start;
- return false;
+ return FALSE;
}
/* Summary of register_name().
*
* in: Input_line_pointer points to 1st char of operand.
*
- * out: A expressionS.
+ * out: An expressionS.
* The operand may have been a register: in this case, X_op == O_register,
* X_add_number is set to the register number, and truth is returned.
* Input_line_pointer->(next non-blank) char after operand, or is in
* its original state.
*/
-static boolean
+static bfd_boolean
address_register_name (expressionP)
expressionS *expressionP;
{
expressionP->X_add_symbol = NULL;
expressionP->X_op_symbol = NULL;
- return true;
+ return TRUE;
}
/* Reset the line as if we had not done anything. */
input_line_pointer = start;
- return false;
+ return FALSE;
}
/* Summary of register_name().
*
* in: Input_line_pointer points to 1st char of operand.
*
- * out: A expressionS.
+ * out: An expressionS.
* The operand may have been a register: in this case, X_op == O_register,
* X_add_number is set to the register number, and truth is returned.
* Input_line_pointer->(next non-blank) char after operand, or is in
* its original state.
*/
-static boolean
+static bfd_boolean
other_register_name (expressionP)
expressionS *expressionP;
{
*input_line_pointer = c;
/* Look to see if it's in the register table. */
- if (reg_number >= 0)
+ if (reg_number == 0
+ || (reg_number == AM33 && HAVE_AM33))
{
expressionP->X_op = O_register;
- expressionP->X_add_number = reg_number;
+ expressionP->X_add_number = 0;
/* Make the rest nice. */
expressionP->X_add_symbol = NULL;
expressionP->X_op_symbol = NULL;
- return true;
+ return TRUE;
}
/* Reset the line as if we had not done anything. */
input_line_pointer = start;
- return false;
+ return FALSE;
}
void
int match;
/* Get the opcode. */
- for (s = str; *s != '\0' && !isspace (*s); s++)
+ for (s = str; *s != '\0' && !ISSPACE (*s); s++)
;
if (*s != '\0')
*s++ = '\0';
}
str = s;
- while (isspace (*str))
+ while (ISSPACE (*str))
++str;
input_line_pointer = str;
break;
}
- while (isspace (*str))
+ while (ISSPACE (*str))
++str;
if (*str != '\0')
if (fixp->fx_addsy && fixp->fx_subsy)
{
+ reloc->sym_ptr_ptr = NULL;
+
/* If we got a difference between two symbols, and the
subtracted symbol is in the current section, use a
PC-relative relocation. If both symbols are in the same
reloc->howto = bfd_reloc_type_lookup (stdoutput,
BFD_RELOC_8_PCREL);
return reloc;
-
+
case BFD_RELOC_16:
reloc->howto = bfd_reloc_type_lookup (stdoutput,
BFD_RELOC_16_PCREL);
{
as_bad_where (fixp->fx_file, fixp->fx_line,
"Difference of symbols in different sections is not supported");
- return NULL;
+ }
+ else
+ {
+ char *fixpos = fixp->fx_where + fixp->fx_frag->fr_literal;
+
+ reloc->addend = (S_GET_VALUE (fixp->fx_addsy)
+ - S_GET_VALUE (fixp->fx_subsy) + fixp->fx_offset);
+
+ switch (fixp->fx_r_type)
+ {
+ case BFD_RELOC_8:
+ md_number_to_chars (fixpos, reloc->addend, 1);
+ break;
+
+ case BFD_RELOC_16:
+ md_number_to_chars (fixpos, reloc->addend, 2);
+ break;
+
+ case BFD_RELOC_24:
+ md_number_to_chars (fixpos, reloc->addend, 3);
+ break;
+
+ case BFD_RELOC_32:
+ md_number_to_chars (fixpos, reloc->addend, 4);
+ break;
+
+ default:
+ reloc->sym_ptr_ptr = (asymbol **) &bfd_abs_symbol;
+ return reloc;
+ }
}
- reloc->sym_ptr_ptr = (asymbol **) &bfd_abs_symbol;
- reloc->addend = (S_GET_VALUE (fixp->fx_addsy)
- - S_GET_VALUE (fixp->fx_subsy) + fixp->fx_offset);
+ if (reloc->sym_ptr_ptr)
+ free (reloc->sym_ptr_ptr);
+ free (reloc);
+ return NULL;
}
else
{
return fixp->fx_frag->fr_address + fixp->fx_where;
}
-int
-md_apply_fix3 (fixp, valuep, seg)
- fixS *fixp;
- valueT *valuep;
+void
+md_apply_fix3 (fixP, valP, seg)
+ fixS * fixP;
+ valueT * valP;
segT seg;
{
- char *fixpos = fixp->fx_where + fixp->fx_frag->fr_literal;
+ char * fixpos = fixP->fx_where + fixP->fx_frag->fr_literal;
int size = 0;
- int value;
+ int value = (int) * valP;
- assert (fixp->fx_r_type < BFD_RELOC_UNUSED);
+ assert (fixP->fx_r_type < BFD_RELOC_UNUSED);
/* This should never happen. */
if (seg->flags & SEC_ALLOC)
- abort ();
+ abort ();
/* The value we are passed in *valuep includes the symbol values.
Since we are using BFD_ASSEMBLER, if we are doing this relocation
*valuep, and must use fx_offset instead. However, if the reloc
is PC relative, we do want to use *valuep since it includes the
result of md_pcrel_from. */
- if (fixp->fx_addsy == (symbolS *) NULL || fixp->fx_pcrel)
- value = *valuep;
- else
- value = fixp->fx_offset;
+ if (fixP->fx_addsy != (symbolS *) NULL && ! fixP->fx_pcrel)
+ value = fixP->fx_offset;
/* If the fix is relative to a symbol which is not defined, or not
in the same segment as the fix, we cannot resolve it here. */
- if (fixp->fx_addsy != NULL
- && (! S_IS_DEFINED (fixp->fx_addsy)
- || (S_GET_SEGMENT (fixp->fx_addsy) != seg)))
+ if (fixP->fx_addsy != NULL
+ && (! S_IS_DEFINED (fixP->fx_addsy)
+ || (S_GET_SEGMENT (fixP->fx_addsy) != seg)))
{
- fixp->fx_done = 0;
- return 0;
+ fixP->fx_done = 0;
+ return;
}
- switch (fixp->fx_r_type)
+ switch (fixP->fx_r_type)
{
case BFD_RELOC_8:
case BFD_RELOC_8_PCREL:
case BFD_RELOC_VTABLE_INHERIT:
case BFD_RELOC_VTABLE_ENTRY:
- fixp->fx_done = 0;
- return 1;
+ fixP->fx_done = 0;
+ return;
case BFD_RELOC_NONE:
default:
- as_bad_where (fixp->fx_file, fixp->fx_line,
- _("Bad relocation fixup type (%d)"), fixp->fx_r_type);
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("Bad relocation fixup type (%d)"), fixP->fx_r_type);
}
md_number_to_chars (fixpos, value, size);
/* If a symbol remains, pass the fixup, as a reloc, onto the linker. */
- if (fixp->fx_addsy == NULL)
- fixp->fx_done = 1;
-
- return 0;
+ if (fixP->fx_addsy == NULL)
+ fixP->fx_done = 1;
}
/* Return nonzero if the fixup in FIXP will require a relocation,
|| fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
return 1;
- /* Do not adjust relocations involving symbols in code sections,
- because it breaks linker relaxations. This could be fixed in the
- linker, but this fix is simpler, and it pretty much only affects
- object size a little bit. */
- if ((S_GET_SEGMENT (fixp->fx_addsy)->flags & SEC_CODE)
- && fixp->fx_subsy
- && S_GET_SEGMENT (fixp->fx_addsy) == S_GET_SEGMENT (fixp->fx_subsy))
- return 1;
-
- return 0;
+ return S_FORCE_RELOC (fixp->fx_addsy);
}
/* Return zero if the fixup in fixp should be left alone and not
adjusted. */
-boolean
+bfd_boolean
mn10300_fix_adjustable (fixp)
struct fix *fixp;
{
- /* Prevent all adjustments to global symbols. */
- if (S_IS_EXTERN (fixp->fx_addsy) || S_IS_WEAK (fixp->fx_addsy))
- return 0;
-
if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
return 0;
static void
set_arch_mach (mach)
- int mach;
+ unsigned int mach;
{
if (!bfd_set_arch_mach (stdoutput, bfd_arch_mn10300, mach))
as_warn (_("could not set architecture and machine"));
projects / deliverable / binutils-gdb.git / blobdiff