-/* tc-sh.c -- Assemble code for the Hitachi Super-H
- Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+/* tc-sh.c -- Assemble code for the Renesas / SuperH SH
+ Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
static unsigned int assemble_ppi PARAMS ((char *, sh_opcode_info *));
static void little PARAMS ((int));
static void big PARAMS ((int));
-static bfd_reloc_code_real_type sh_elf_suffix
- PARAMS ((char **str_p, expressionS *, expressionS *new_exp_p));
static int parse_reg PARAMS ((char *, int *, int *));
-static symbolS *dot PARAMS ((void));
static char *parse_exp PARAMS ((char *, sh_operand_info *));
static char *parse_at PARAMS ((char *, sh_operand_info *));
static void get_operand PARAMS ((char **, sh_operand_info *));
static char *insert_loop_bounds PARAMS ((char *, sh_operand_info *));
static unsigned int build_Mytes
PARAMS ((sh_opcode_info *, sh_operand_info *));
+static bfd_boolean sh_local_pcrel PARAMS ((fixS *fix));
#ifdef OBJ_ELF
static void sh_elf_cons PARAMS ((int));
+inline static int sh_PIC_related_p PARAMS ((symbolS *));
+static int sh_check_fixup PARAMS ((expressionS *, bfd_reloc_code_real_type *));
+inline static char *sh_end_of_match PARAMS ((char *, char *));
+
symbolS *GOT_symbol; /* Pre-defined "_GLOBAL_OFFSET_TABLE_" */
#endif
{"2byte", s_uacons, 2},
{"4byte", s_uacons, 4},
{"8byte", s_uacons, 8},
-#ifdef BFD_ASSEMBLER
- {"file", dwarf2_directive_file, 0 },
- {"loc", dwarf2_directive_loc, 0 },
-#endif
+#ifdef HAVE_SH64
+ {"mode", s_sh64_mode, 0 },
+
+ /* Have the old name too. */
+ {"isa", s_sh64_mode, 0 },
+
+ /* Assert that the right ABI is used. */
+ {"abi", s_sh64_abi, 0 },
+
+ { "vtable_inherit", sh64_vtable_inherit, 0 },
+ { "vtable_entry", sh64_vtable_entry, 0 },
+#endif /* HAVE_SH64 */
{0, 0, 0}
};
int sh_small;
-/* Whether -dsp was seen. */
+/* preset architecture set, if given; zero otherwise. */
-static int sh_dsp;
+static int preset_target_arch;
/* The bit mask of architectures that could
accomodate the insns seen so far. */
#define GET_WHAT(x) ((x>>4))
/* These are the three types of relaxable instrction. */
+/* These are the types of relaxable instructions; except for END which is
+ a marker. */
#define COND_JUMP 1
#define COND_JUMP_DELAY 2
#define UNCOND_JUMP 3
+
+#ifdef HAVE_SH64
+
+/* A 16-bit (times four) pc-relative operand, at most expanded to 32 bits. */
+#define SH64PCREL16_32 4
+/* A 16-bit (times four) pc-relative operand, at most expanded to 64 bits. */
+#define SH64PCREL16_64 5
+
+/* Variants of the above for adjusting the insn to PTA or PTB according to
+ the label. */
+#define SH64PCREL16PT_32 6
+#define SH64PCREL16PT_64 7
+
+/* A MOVI expansion, expanding to at most 32 or 64 bits. */
+#define MOVI_IMM_32 8
+#define MOVI_IMM_32_PCREL 9
+#define MOVI_IMM_64 10
+#define MOVI_IMM_64_PCREL 11
+#define END 12
+
+#else /* HAVE_SH64 */
+
#define END 4
+#endif /* HAVE_SH64 */
+
#define UNDEF_DISP 0
#define COND8 1
#define COND12 2
#define UNCOND12 1
#define UNCOND32 2
+#ifdef HAVE_SH64
+#define UNDEF_SH64PCREL 0
+#define SH64PCREL16 1
+#define SH64PCREL32 2
+#define SH64PCREL48 3
+#define SH64PCREL64 4
+#define SH64PCRELPLT 5
+
+#define UNDEF_MOVI 0
+#define MOVI_16 1
+#define MOVI_32 2
+#define MOVI_48 3
+#define MOVI_64 4
+#define MOVI_PLT 5
+#define MOVI_GOTOFF 6
+#define MOVI_GOTPC 7
+#endif /* HAVE_SH64 */
+
/* Branch displacements are from the address of the branch plus
four, thus all minimum and maximum values have 4 added to them. */
#define COND8_F 258
#define UNCOND32_M -(1<<30)
#define UNCOND32_LENGTH 14
+#ifdef HAVE_SH64
+/* The trivial expansion of a SH64PCREL16 relaxation is just a "PT label,
+ TRd" as is the current insn, so no extra length. Note that the "reach"
+ is calculated from the address *after* that insn, but the offset in the
+ insn is calculated from the beginning of the insn. We also need to
+ take into account the implicit 1 coded as the "A" in PTA when counting
+ forward. If PTB reaches an odd address, we trap that as an error
+ elsewhere, so we don't have to have different relaxation entries. We
+ don't add a one to the negative range, since PTB would then have the
+ farthest backward-reaching value skipped, not generated at relaxation. */
+#define SH64PCREL16_F (32767 * 4 - 4 + 1)
+#define SH64PCREL16_M (-32768 * 4 - 4)
+#define SH64PCREL16_LENGTH 0
+
+/* The next step is to change that PT insn into
+ MOVI ((label - datalabel Ln) >> 16) & 65535, R25
+ SHORI (label - datalabel Ln) & 65535, R25
+ Ln:
+ PTREL R25,TRd
+ which means two extra insns, 8 extra bytes. This is the limit for the
+ 32-bit ABI.
+
+ The expressions look a bit bad since we have to adjust this to avoid overflow on a
+ 32-bit host. */
+#define SH64PCREL32_F ((((long) 1 << 30) - 1) * 2 + 1 - 4)
+#define SH64PCREL32_LENGTH (2 * 4)
+
+/* Similarly, we just change the MOVI and add a SHORI for the 48-bit
+ expansion. */
+#if BFD_HOST_64BIT_LONG
+/* The "reach" type is long, so we can only do this for a 64-bit-long
+ host. */
+#define SH64PCREL32_M (((long) -1 << 30) * 2 - 4)
+#define SH64PCREL48_F ((((long) 1 << 47) - 1) - 4)
+#define SH64PCREL48_M (((long) -1 << 47) - 4)
+#define SH64PCREL48_LENGTH (3 * 4)
+#else
+/* If the host does not have 64-bit longs, just make this state identical
+ in reach to the 32-bit state. Note that we have a slightly incorrect
+ reach, but the correct one above will overflow a 32-bit number. */
+#define SH64PCREL32_M (((long) -1 << 30) * 2)
+#define SH64PCREL48_F SH64PCREL32_F
+#define SH64PCREL48_M SH64PCREL32_M
+#define SH64PCREL48_LENGTH (3 * 4)
+#endif /* BFD_HOST_64BIT_LONG */
+
+/* And similarly for the 64-bit expansion; a MOVI + SHORI + SHORI + SHORI
+ + PTREL sequence. */
+#define SH64PCREL64_LENGTH (4 * 4)
+
+/* For MOVI, we make the MOVI + SHORI... expansion you can see in the
+ SH64PCREL expansions. The PCREL one is similar, but the other has no
+ pc-relative reach; it must be fully expanded in
+ shmedia_md_estimate_size_before_relax. */
+#define MOVI_16_LENGTH 0
+#define MOVI_16_F (32767 - 4)
+#define MOVI_16_M (-32768 - 4)
+#define MOVI_32_LENGTH 4
+#define MOVI_32_F ((((long) 1 << 30) - 1) * 2 + 1 - 4)
+#define MOVI_48_LENGTH 8
+
+#if BFD_HOST_64BIT_LONG
+/* The "reach" type is long, so we can only do this for a 64-bit-long
+ host. */
+#define MOVI_32_M (((long) -1 << 30) * 2 - 4)
+#define MOVI_48_F ((((long) 1 << 47) - 1) - 4)
+#define MOVI_48_M (((long) -1 << 47) - 4)
+#else
+/* If the host does not have 64-bit longs, just make this state identical
+ in reach to the 32-bit state. Note that we have a slightly incorrect
+ reach, but the correct one above will overflow a 32-bit number. */
+#define MOVI_32_M (((long) -1 << 30) * 2)
+#define MOVI_48_F MOVI_32_F
+#define MOVI_48_M MOVI_32_M
+#endif /* BFD_HOST_64BIT_LONG */
+
+#define MOVI_64_LENGTH 12
+#endif /* HAVE_SH64 */
+
#define EMPTY { 0, 0, 0, 0 }
const relax_typeS md_relax_table[C (END, 0)] = {
{ 0, 0, UNCOND32_LENGTH, 0, },
EMPTY, EMPTY, EMPTY,
EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
+
+#ifdef HAVE_SH64
+ /* C (SH64PCREL16_32, SH64PCREL16) */
+ EMPTY,
+ { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16_32, SH64PCREL32) },
+ /* C (SH64PCREL16_32, SH64PCREL32) */
+ { 0, 0, SH64PCREL32_LENGTH, 0 },
+ EMPTY, EMPTY,
+ /* C (SH64PCREL16_32, SH64PCRELPLT) */
+ { 0, 0, SH64PCREL32_LENGTH, 0 },
+ EMPTY, EMPTY,
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
+
+ /* C (SH64PCREL16_64, SH64PCREL16) */
+ EMPTY,
+ { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16_64, SH64PCREL32) },
+ /* C (SH64PCREL16_64, SH64PCREL32) */
+ { SH64PCREL32_F, SH64PCREL32_M, SH64PCREL32_LENGTH, C (SH64PCREL16_64, SH64PCREL48) },
+ /* C (SH64PCREL16_64, SH64PCREL48) */
+ { SH64PCREL48_F, SH64PCREL48_M, SH64PCREL48_LENGTH, C (SH64PCREL16_64, SH64PCREL64) },
+ /* C (SH64PCREL16_64, SH64PCREL64) */
+ { 0, 0, SH64PCREL64_LENGTH, 0 },
+ /* C (SH64PCREL16_64, SH64PCRELPLT) */
+ { 0, 0, SH64PCREL64_LENGTH, 0 },
+ EMPTY, EMPTY,
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
+
+ /* C (SH64PCREL16PT_32, SH64PCREL16) */
+ EMPTY,
+ { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16PT_32, SH64PCREL32) },
+ /* C (SH64PCREL16PT_32, SH64PCREL32) */
+ { 0, 0, SH64PCREL32_LENGTH, 0 },
+ EMPTY, EMPTY,
+ /* C (SH64PCREL16PT_32, SH64PCRELPLT) */
+ { 0, 0, SH64PCREL32_LENGTH, 0 },
+ EMPTY, EMPTY,
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
+
+ /* C (SH64PCREL16PT_64, SH64PCREL16) */
+ EMPTY,
+ { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16PT_64, SH64PCREL32) },
+ /* C (SH64PCREL16PT_64, SH64PCREL32) */
+ { SH64PCREL32_F,
+ SH64PCREL32_M,
+ SH64PCREL32_LENGTH,
+ C (SH64PCREL16PT_64, SH64PCREL48) },
+ /* C (SH64PCREL16PT_64, SH64PCREL48) */
+ { SH64PCREL48_F, SH64PCREL48_M, SH64PCREL48_LENGTH, C (SH64PCREL16PT_64, SH64PCREL64) },
+ /* C (SH64PCREL16PT_64, SH64PCREL64) */
+ { 0, 0, SH64PCREL64_LENGTH, 0 },
+ /* C (SH64PCREL16PT_64, SH64PCRELPLT) */
+ { 0, 0, SH64PCREL64_LENGTH, 0},
+ EMPTY, EMPTY,
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
+
+ /* C (MOVI_IMM_32, UNDEF_MOVI) */
+ { 0, 0, MOVI_32_LENGTH, 0 },
+ /* C (MOVI_IMM_32, MOVI_16) */
+ { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_32, MOVI_32) },
+ /* C (MOVI_IMM_32, MOVI_32) */
+ { MOVI_32_F, MOVI_32_M, MOVI_32_LENGTH, 0 },
+ EMPTY, EMPTY, EMPTY,
+ /* C (MOVI_IMM_32, MOVI_GOTOFF) */
+ { 0, 0, MOVI_32_LENGTH, 0 },
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
+
+ /* C (MOVI_IMM_32_PCREL, MOVI_16) */
+ EMPTY,
+ { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_32_PCREL, MOVI_32) },
+ /* C (MOVI_IMM_32_PCREL, MOVI_32) */
+ { 0, 0, MOVI_32_LENGTH, 0 },
+ EMPTY, EMPTY,
+ /* C (MOVI_IMM_32_PCREL, MOVI_PLT) */
+ { 0, 0, MOVI_32_LENGTH, 0 },
+ EMPTY,
+ /* C (MOVI_IMM_32_PCREL, MOVI_GOTPC) */
+ { 0, 0, MOVI_32_LENGTH, 0 },
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
+
+ /* C (MOVI_IMM_64, UNDEF_MOVI) */
+ { 0, 0, MOVI_64_LENGTH, 0 },
+ /* C (MOVI_IMM_64, MOVI_16) */
+ { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_64, MOVI_32) },
+ /* C (MOVI_IMM_64, MOVI_32) */
+ { MOVI_32_F, MOVI_32_M, MOVI_32_LENGTH, C (MOVI_IMM_64, MOVI_48) },
+ /* C (MOVI_IMM_64, MOVI_48) */
+ { MOVI_48_F, MOVI_48_M, MOVI_48_LENGTH, C (MOVI_IMM_64, MOVI_64) },
+ /* C (MOVI_IMM_64, MOVI_64) */
+ { 0, 0, MOVI_64_LENGTH, 0 },
+ EMPTY,
+ /* C (MOVI_IMM_64, MOVI_GOTOFF) */
+ { 0, 0, MOVI_64_LENGTH, 0 },
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
+
+ /* C (MOVI_IMM_64_PCREL, MOVI_16) */
+ EMPTY,
+ { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_64_PCREL, MOVI_32) },
+ /* C (MOVI_IMM_64_PCREL, MOVI_32) */
+ { MOVI_32_F, MOVI_32_M, MOVI_32_LENGTH, C (MOVI_IMM_64_PCREL, MOVI_48) },
+ /* C (MOVI_IMM_64_PCREL, MOVI_48) */
+ { MOVI_48_F, MOVI_48_M, MOVI_48_LENGTH, C (MOVI_IMM_64_PCREL, MOVI_64) },
+ /* C (MOVI_IMM_64_PCREL, MOVI_64) */
+ { 0, 0, MOVI_64_LENGTH, 0 },
+ /* C (MOVI_IMM_64_PCREL, MOVI_PLT) */
+ { 0, 0, MOVI_64_LENGTH, 0 },
+ EMPTY,
+ /* C (MOVI_IMM_64_PCREL, MOVI_GOTPC) */
+ { 0, 0, MOVI_64_LENGTH, 0 },
+ EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY,
+
+#endif /* HAVE_SH64 */
+
};
#undef EMPTY
\f
#ifdef OBJ_ELF
-/* Parse @got, etc. and return the desired relocation.
- If we have additional arithmetic expression, then we fill in new_exp_p. */
-static bfd_reloc_code_real_type
-sh_elf_suffix (str_p, exp_p, new_exp_p)
- char **str_p;
- expressionS *exp_p, *new_exp_p;
+/* Determinet whether the symbol needs any kind of PIC relocation. */
+
+inline static int
+sh_PIC_related_p (sym)
+ symbolS *sym;
{
- struct map_bfd {
- char *string;
- int length;
- bfd_reloc_code_real_type reloc;
- };
+ expressionS *exp;
- char ident[20];
- char *str = *str_p;
- char *str2;
- int ch;
- int len;
- struct map_bfd *ptr;
-
-#define MAP(str,reloc) { str, sizeof (str)-1, reloc }
-
- static struct map_bfd mapping[] = {
- MAP ("got", BFD_RELOC_32_GOT_PCREL),
- MAP ("plt", BFD_RELOC_32_PLT_PCREL),
- MAP ("gotoff", BFD_RELOC_32_GOTOFF),
- { (char *)0, 0, BFD_RELOC_UNUSED }
- };
-
- if (*str++ != '@')
- return BFD_RELOC_UNUSED;
-
- for (ch = *str, str2 = ident;
- (str2 < ident + sizeof (ident) - 1
- && (ISALNUM (ch) || ch == '@'));
- ch = *++str)
- *str2++ = TOLOWER (ch);
-
- *str2 = '\0';
- len = str2 - ident;
-
- ch = ident[0];
- for (ptr = &mapping[0]; ptr->length > 0; ptr++)
- if (ch == ptr->string[0]
- && len == ptr->length
- && memcmp (ident, ptr->string, ptr->length) == 0)
+ if (! sym)
+ return 0;
+
+ if (sym == GOT_symbol)
+ return 1;
+
+#ifdef HAVE_SH64
+ if (sh_PIC_related_p (*symbol_get_tc (sym)))
+ return 1;
+#endif
+
+ exp = symbol_get_value_expression (sym);
+
+ return (exp->X_op == O_PIC_reloc
+ || sh_PIC_related_p (exp->X_add_symbol)
+ || sh_PIC_related_p (exp->X_op_symbol));
+}
+
+/* Determine the relocation type to be used to represent the
+ expression, that may be rearranged. */
+
+static int
+sh_check_fixup (main_exp, r_type_p)
+ expressionS *main_exp;
+ bfd_reloc_code_real_type *r_type_p;
+{
+ expressionS *exp = main_exp;
+
+ /* This is here for backward-compatibility only. GCC used to generated:
+
+ f@PLT + . - (.LPCS# + 2)
+
+ but we'd rather be able to handle this as a PIC-related reference
+ plus/minus a symbol. However, gas' parser gives us:
+
+ O_subtract (O_add (f@PLT, .), .LPCS#+2)
+
+ so we attempt to transform this into:
+
+ O_subtract (f@PLT, O_subtract (.LPCS#+2, .))
+
+ which we can handle simply below. */
+ if (exp->X_op == O_subtract)
+ {
+ if (sh_PIC_related_p (exp->X_op_symbol))
+ return 1;
+
+ exp = symbol_get_value_expression (exp->X_add_symbol);
+
+ if (exp && sh_PIC_related_p (exp->X_op_symbol))
+ return 1;
+
+ if (exp && exp->X_op == O_add
+ && sh_PIC_related_p (exp->X_add_symbol))
+ {
+ symbolS *sym = exp->X_add_symbol;
+
+ exp->X_op = O_subtract;
+ exp->X_add_symbol = main_exp->X_op_symbol;
+
+ main_exp->X_op_symbol = main_exp->X_add_symbol;
+ main_exp->X_add_symbol = sym;
+
+ main_exp->X_add_number += exp->X_add_number;
+ exp->X_add_number = 0;
+ }
+
+ exp = main_exp;
+ }
+ else if (exp->X_op == O_add && sh_PIC_related_p (exp->X_op_symbol))
+ return 1;
+
+ if (exp->X_op == O_symbol || exp->X_op == O_add || exp->X_op == O_subtract)
+ {
+#ifdef HAVE_SH64
+ if (exp->X_add_symbol
+ && (exp->X_add_symbol == GOT_symbol
+ || (GOT_symbol
+ && *symbol_get_tc (exp->X_add_symbol) == GOT_symbol)))
+ {
+ switch (*r_type_p)
+ {
+ case BFD_RELOC_SH_IMM_LOW16:
+ *r_type_p = BFD_RELOC_SH_GOTPC_LOW16;
+ break;
+
+ case BFD_RELOC_SH_IMM_MEDLOW16:
+ *r_type_p = BFD_RELOC_SH_GOTPC_MEDLOW16;
+ break;
+
+ case BFD_RELOC_SH_IMM_MEDHI16:
+ *r_type_p = BFD_RELOC_SH_GOTPC_MEDHI16;
+ break;
+
+ case BFD_RELOC_SH_IMM_HI16:
+ *r_type_p = BFD_RELOC_SH_GOTPC_HI16;
+ break;
+
+ case BFD_RELOC_NONE:
+ case BFD_RELOC_UNUSED:
+ *r_type_p = BFD_RELOC_SH_GOTPC;
+ break;
+
+ default:
+ abort ();
+ }
+ return 0;
+ }
+#else
+ if (exp->X_add_symbol && exp->X_add_symbol == GOT_symbol)
+ {
+ *r_type_p = BFD_RELOC_SH_GOTPC;
+ return 0;
+ }
+#endif
+ exp = symbol_get_value_expression (exp->X_add_symbol);
+ if (! exp)
+ return 0;
+ }
+
+ if (exp->X_op == O_PIC_reloc)
+ {
+#ifdef HAVE_SH64
+ switch (*r_type_p)
+ {
+ case BFD_RELOC_NONE:
+ case BFD_RELOC_UNUSED:
+ *r_type_p = exp->X_md;
+ break;
+
+ case BFD_RELOC_SH_IMM_LOW16:
+ switch (exp->X_md)
+ {
+ case BFD_RELOC_32_GOTOFF:
+ *r_type_p = BFD_RELOC_SH_GOTOFF_LOW16;
+ break;
+
+ case BFD_RELOC_SH_GOTPLT32:
+ *r_type_p = BFD_RELOC_SH_GOTPLT_LOW16;
+ break;
+
+ case BFD_RELOC_32_GOT_PCREL:
+ *r_type_p = BFD_RELOC_SH_GOT_LOW16;
+ break;
+
+ case BFD_RELOC_32_PLT_PCREL:
+ *r_type_p = BFD_RELOC_SH_PLT_LOW16;
+ break;
+
+ default:
+ abort ();
+ }
+ break;
+
+ case BFD_RELOC_SH_IMM_MEDLOW16:
+ switch (exp->X_md)
+ {
+ case BFD_RELOC_32_GOTOFF:
+ *r_type_p = BFD_RELOC_SH_GOTOFF_MEDLOW16;
+ break;
+
+ case BFD_RELOC_SH_GOTPLT32:
+ *r_type_p = BFD_RELOC_SH_GOTPLT_MEDLOW16;
+ break;
+
+ case BFD_RELOC_32_GOT_PCREL:
+ *r_type_p = BFD_RELOC_SH_GOT_MEDLOW16;
+ break;
+
+ case BFD_RELOC_32_PLT_PCREL:
+ *r_type_p = BFD_RELOC_SH_PLT_MEDLOW16;
+ break;
+
+ default:
+ abort ();
+ }
+ break;
+
+ case BFD_RELOC_SH_IMM_MEDHI16:
+ switch (exp->X_md)
+ {
+ case BFD_RELOC_32_GOTOFF:
+ *r_type_p = BFD_RELOC_SH_GOTOFF_MEDHI16;
+ break;
+
+ case BFD_RELOC_SH_GOTPLT32:
+ *r_type_p = BFD_RELOC_SH_GOTPLT_MEDHI16;
+ break;
+
+ case BFD_RELOC_32_GOT_PCREL:
+ *r_type_p = BFD_RELOC_SH_GOT_MEDHI16;
+ break;
+
+ case BFD_RELOC_32_PLT_PCREL:
+ *r_type_p = BFD_RELOC_SH_PLT_MEDHI16;
+ break;
+
+ default:
+ abort ();
+ }
+ break;
+
+ case BFD_RELOC_SH_IMM_HI16:
+ switch (exp->X_md)
+ {
+ case BFD_RELOC_32_GOTOFF:
+ *r_type_p = BFD_RELOC_SH_GOTOFF_HI16;
+ break;
+
+ case BFD_RELOC_SH_GOTPLT32:
+ *r_type_p = BFD_RELOC_SH_GOTPLT_HI16;
+ break;
+
+ case BFD_RELOC_32_GOT_PCREL:
+ *r_type_p = BFD_RELOC_SH_GOT_HI16;
+ break;
+
+ case BFD_RELOC_32_PLT_PCREL:
+ *r_type_p = BFD_RELOC_SH_PLT_HI16;
+ break;
+
+ default:
+ abort ();
+ }
+ break;
+
+ default:
+ abort ();
+ }
+#else
+ *r_type_p = exp->X_md;
+#endif
+ if (exp == main_exp)
+ exp->X_op = O_symbol;
+ else
+ {
+ main_exp->X_add_symbol = exp->X_add_symbol;
+ main_exp->X_add_number += exp->X_add_number;
+ }
+ }
+ else
+ return (sh_PIC_related_p (exp->X_add_symbol)
+ || sh_PIC_related_p (exp->X_op_symbol));
+
+ return 0;
+}
+
+/* Add expression EXP of SIZE bytes to offset OFF of fragment FRAG. */
+
+void
+sh_cons_fix_new (frag, off, size, exp)
+ fragS *frag;
+ int off, size;
+ expressionS *exp;
+{
+ bfd_reloc_code_real_type r_type = BFD_RELOC_UNUSED;
+
+ if (sh_check_fixup (exp, &r_type))
+ as_bad (_("Invalid PIC expression."));
+
+ if (r_type == BFD_RELOC_UNUSED)
+ switch (size)
{
- /* Now check for identifier@suffix+constant */
- if (*str == '-' || *str == '+')
- {
- char *orig_line = input_line_pointer;
-
- input_line_pointer = str;
- expression (new_exp_p);
- if (new_exp_p->X_op == O_constant)
- {
- exp_p->X_add_number += new_exp_p->X_add_number;
- str = input_line_pointer;
- }
- if (new_exp_p->X_op == O_subtract)
- str = input_line_pointer;
-
- if (&input_line_pointer != str_p)
- input_line_pointer = orig_line;
- }
+ case 1:
+ r_type = BFD_RELOC_8;
+ break;
+
+ case 2:
+ r_type = BFD_RELOC_16;
+ break;
+
+ case 4:
+ r_type = BFD_RELOC_32;
+ break;
+
+#ifdef HAVE_SH64
+ case 8:
+ r_type = BFD_RELOC_64;
+ break;
+#endif
- *str_p = str;
- return ptr->reloc;
+ default:
+ goto error;
}
+ else if (size != 4)
+ {
+ error:
+ as_bad (_("unsupported BFD relocation size %u"), size);
+ r_type = BFD_RELOC_UNUSED;
+ }
- return BFD_RELOC_UNUSED;
+ fix_new_exp (frag, off, size, exp, 0, r_type);
}
/* The regular cons() function, that reads constants, doesn't support
sh_elf_cons (nbytes)
register int nbytes; /* 1=.byte, 2=.word, 4=.long */
{
- expressionS exp, new_exp;
- bfd_reloc_code_real_type reloc;
- const char *name;
+ expressionS exp;
+
+#ifdef HAVE_SH64
+
+ /* Update existing range to include a previous insn, if there was one. */
+ sh64_update_contents_mark (TRUE);
+
+ /* We need to make sure the contents type is set to data. */
+ sh64_flag_output ();
+
+#endif /* HAVE_SH64 */
if (is_it_end_of_statement ())
{
do
{
expression (&exp);
- new_exp.X_op = O_absent;
- new_exp.X_add_symbol = new_exp.X_op_symbol = NULL;
- /* If the _GLOBAL_OFFSET_TABLE_ symbol hasn't been found yet,
- use the name of the symbol to tell whether it's the
- _GLOBAL_OFFSET_TABLE_. If it has, comparing the symbols is
- sufficient. */
- if (! GOT_symbol && exp.X_add_symbol)
- name = S_GET_NAME (exp.X_add_symbol);
- else
- name = NULL;
- /* Check whether this expression involves the
- _GLOBAL_OFFSET_TABLE_ symbol, by itself or added to a
- difference of two other symbols. */
- if (((GOT_symbol && GOT_symbol == exp.X_add_symbol)
- || (! GOT_symbol && name
- && strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0))
- && (exp.X_op == O_symbol
- || (exp.X_op == O_add
- && ((symbol_get_value_expression (exp.X_op_symbol)->X_op)
- == O_subtract))))
- {
- reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput,
- BFD_RELOC_32);
- int size = bfd_get_reloc_size (reloc_howto);
-
- if (GOT_symbol == NULL)
- GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
-
- if (size > nbytes)
- as_bad (_("%s relocations do not fit in %d bytes\n"),
- reloc_howto->name, nbytes);
- else
- {
- register char *p = frag_more ((int) nbytes);
- int offset = nbytes - size;
-
- fix_new_exp (frag_now, p - frag_now->fr_literal + offset,
- size, &exp, 0, TC_RELOC_GLOBAL_OFFSET_TABLE);
- }
- }
- /* Check if this symbol involves one of the magic suffixes, such
- as @GOT, @GOTOFF or @PLT, and determine which relocation type
- to use. */
- else if ((exp.X_op == O_symbol || (exp.X_op == O_add && exp.X_op_symbol))
- && *input_line_pointer == '@'
- && ((reloc = sh_elf_suffix (&input_line_pointer, &exp, &new_exp))
- != BFD_RELOC_UNUSED))
- {
- reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput,
- reloc);
- int size = bfd_get_reloc_size (reloc_howto);
-
- /* Force a GOT to be generated. */
- if (GOT_symbol == NULL)
- GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
-
- if (size > nbytes)
- as_bad (_("%s relocations do not fit in %d bytes\n"),
- reloc_howto->name, nbytes);
- else
- {
- register char *p = frag_more ((int) nbytes);
- int offset = nbytes - size;
-
- fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size,
- &exp, 0, reloc);
- if (new_exp.X_op != O_absent)
- fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size,
- &new_exp, 0, BFD_RELOC_32);
- }
- }
- else
- emit_expr (&exp, (unsigned int) nbytes);
+ emit_expr (&exp, (unsigned int) nbytes);
}
while (*input_line_pointer++ == ',');
void
md_begin ()
{
- sh_opcode_info *opcode;
+ const sh_opcode_info *opcode;
char *prev_name = "";
int target_arch;
- target_arch = arch_sh1_up & ~(sh_dsp ? arch_sh3e_up : arch_sh_dsp_up);
+ target_arch
+ = preset_target_arch ? preset_target_arch : arch_sh1_up & ~arch_sh_dsp_up;
valid_arch = target_arch;
+#ifdef HAVE_SH64
+ shmedia_md_begin ();
+#endif
+
opcode_hash_control = hash_new ();
/* Insert unique names into hash table. */
for (opcode = sh_table; opcode->name; opcode++)
{
- if (strcmp (prev_name, opcode->name))
+ if (strcmp (prev_name, opcode->name) != 0)
{
if (! (opcode->arch & target_arch))
continue;
prev_name = opcode->name;
hash_insert (opcode_hash_control, opcode->name, (char *) opcode);
}
- else
- {
- /* Make all the opcodes with the same name point to the same
- string. */
- opcode->name = prev_name;
- }
}
}
}
}
- if (l0 == 'i' && l1 && ! IDENT_CHAR ((unsigned char) src[3]))
+ if (l0 == 'i' && l1 && ! IDENT_CHAR ((unsigned char) src[2]))
{
if (l1 == 's')
{
}
}
if (l0 == 'm' && l1 == 'o' && TOLOWER (src[2]) == 'd'
- && ! IDENT_CHAR ((unsigned char) src[4]))
+ && ! IDENT_CHAR ((unsigned char) src[3]))
{
*mode = A_MOD;
return 3;
return 0;
}
-static symbolS *
-dot ()
-{
- const char *fake;
-
- /* JF: '.' is pseudo symbol with value of current location
- in current segment. */
- fake = FAKE_LABEL_NAME;
- return symbol_new (fake,
- now_seg,
- (valueT) frag_now_fix (),
- frag_now);
-}
-
static char *
parse_exp (s, op)
char *s;
expression (&op->immediate);
if (op->immediate.X_op == O_absent)
as_bad (_("missing operand"));
+#ifdef OBJ_ELF
+ else if (op->immediate.X_op == O_PIC_reloc
+ || sh_PIC_related_p (op->immediate.X_add_symbol)
+ || sh_PIC_related_p (op->immediate.X_op_symbol))
+ as_bad (_("misplaced PIC operand"));
+#endif
new = input_line_pointer;
input_line_pointer = save;
return new;
else if (src[0] == '(')
{
/* Could be @(disp, rn), @(disp, gbr), @(disp, pc), @(r0, gbr) or
- @(r0, rn) */
+ @(r0, rn). */
src++;
len = parse_reg (src, &mode, &(op->reg));
if (len && mode == A_REG_N)
as_bad (_("must be @(r0,...)"));
}
if (src[0] == ',')
- src++;
- /* Now can be rn or gbr */
- len = parse_reg (src, &mode, &(op->reg));
- if (mode == A_GBR)
{
- op->type = A_R0_GBR;
+ src++;
+ /* Now can be rn or gbr. */
+ len = parse_reg (src, &mode, &(op->reg));
}
- else if (mode == A_REG_N)
+ else
+ {
+ len = 0;
+ }
+ if (len)
{
- op->type = A_IND_R0_REG_N;
+ if (mode == A_GBR)
+ {
+ op->type = A_R0_GBR;
+ }
+ else if (mode == A_REG_N)
+ {
+ op->type = A_IND_R0_REG_N;
+ }
+ else
+ {
+ as_bad (_("syntax error in @(r0,...)"));
+ }
}
else
{
- as_bad (_("syntax error in @(r0,...)"));
+ as_bad (_("syntax error in @(r0...)"));
}
}
else
{
- /* Must be an @(disp,.. thing) */
+ /* Must be an @(disp,.. thing). */
src = parse_exp (src, op);
if (src[0] == ',')
src++;
- /* Now can be rn, gbr or pc */
+ /* Now can be rn, gbr or pc. */
len = parse_reg (src, &mode, &op->reg);
if (len)
{
}
else if (mode == A_PC)
{
- /* Turn a plain @(4,pc) into @(.+4,pc). */
- if (op->immediate.X_op == O_constant)
+ /* We want @(expr, pc) to uniformly address . + expr,
+ no matter if expr is a constant, or a more complex
+ expression, e.g. sym-. or sym1-sym2.
+ However, we also used to accept @(sym,pc)
+ as adressing sym, i.e. meaning the same as plain sym.
+ Some existing code does use the @(sym,pc) syntax, so
+ we give it the old semantics for now, but warn about
+ its use, so that users have some time to fix their code.
+
+ Note that due to this backward compatibility hack,
+ we'll get unexpected results when @(offset, pc) is used,
+ and offset is a symbol that is set later to an an address
+ difference, or an external symbol that is set to an
+ address difference in another source file, so we want to
+ eventually remove it. */
+ if (op->immediate.X_op == O_symbol)
+ {
+ op->type = A_DISP_PC;
+ as_warn (_("Deprecated syntax."));
+ }
+ else
{
- op->immediate.X_add_symbol = dot();
- op->immediate.X_op = O_symbol;
+ op->type = A_DISP_PC_ABS;
+ /* Such operands don't get corrected for PC==.+4, so
+ make the correction here. */
+ op->immediate.X_add_number -= 4;
}
- op->type = A_DISP_PC;
}
else
{
{
src += parse_reg (src, &mode, &(op->reg));
if (mode != A_REG_N)
- {
- as_bad (_("illegal register after @"));
- }
+ as_bad (_("illegal register after @"));
+
if (src[0] == '+')
{
char l0, l1;
src += 2;
op->type = A_PMOD_N;
}
- if ((l0 == 'r' && l1 == '9')
- || (l0 == 'i' && l1 == 'y'))
+ else if ( (l0 == 'r' && l1 == '9')
+ || (l0 == 'i' && l1 == 'y'))
{
src += 2;
op->type = A_PMODY_N;
op->type = A_INC_N;
}
else
- {
- op->type = A_IND_N;
- }
+ op->type = A_IND_N;
}
return src;
}
while (opcode->name)
{
this_try = opcode++;
- if (this_try->name != name)
+ if ((this_try->name != name) && (strcmp (this_try->name, name) != 0))
{
/* We've looked so far down the table that we've run out of
opcodes with the same name. */
switch (arg)
{
+ case A_DISP_PC:
+ if (user->type == A_DISP_PC_ABS)
+ break;
+ /* Fall through. */
case A_IMM:
case A_BDISP12:
case A_BDISP8:
case A_DISP_GBR:
- case A_DISP_PC:
case A_MACH:
case A_PR:
case A_MACL:
insert (output + low_byte, BFD_RELOC_SH_IMM8, 0, operand + 1);
break;
case PCRELIMM_8BY4:
- insert (output, BFD_RELOC_SH_PCRELIMM8BY4, 1, operand);
+ insert (output, BFD_RELOC_SH_PCRELIMM8BY4,
+ operand->type != A_DISP_PC_ABS, operand);
break;
case PCRELIMM_8BY2:
- insert (output, BFD_RELOC_SH_PCRELIMM8BY2, 1, operand);
+ insert (output, BFD_RELOC_SH_PCRELIMM8BY2,
+ operand->type != A_DISP_PC_ABS, operand);
break;
case REPEAT:
output = insert_loop_bounds (output, operand);
int move_code;
unsigned int size;
- /* Some insn ignore one or more register fields, e.g. psts machl,a0.
- Make sure we encode a defined insn pattern. */
- reg_x = 0;
- reg_y = 0;
-
for (;;)
{
sh_operand_info operand[3];
+ /* Some insn ignore one or more register fields, e.g. psts machl,a0.
+ Make sure we encode a defined insn pattern. */
+ reg_x = 0;
+ reg_y = 0;
+ reg_n = 0;
+
if (opcode->arg[0] != A_END)
op_end = get_operands (opcode, op_end, operand);
opcode = get_specific (opcode, operand);
default:
as_bad (_("bad padd / psub pmuls output operand"));
}
+ /* Generate warning if the destination register for padd / psub
+ and pmuls is the same ( only for A0 or A1 ).
+ If the last nibble is 1010 then A0 is used in both
+ padd / psub and pmuls. If it is 1111 then A1 is used
+ as destination register in both padd / psub and pmuls. */
+
+ if ((((field_b | reg_efg) & 0x000F) == 0x000A)
+ || (((field_b | reg_efg) & 0x000F) == 0x000F))
+ as_warn (_("destination register is same for parallel insns"));
}
field_b += 0x4000 + reg_efg;
break;
sh_opcode_info *opcode;
unsigned int size = 0;
+#ifdef HAVE_SH64
+ if (sh64_isa_mode == sh64_isa_shmedia)
+ {
+ shmedia_md_assemble (str);
+ return;
+ }
+ else
+ {
+ /* If we've seen pseudo-directives, make sure any emitted data or
+ frags are marked as data. */
+ if (!seen_insn)
+ {
+ sh64_update_contents_mark (TRUE);
+ sh64_set_contents_type (CRT_SH5_ISA16);
+ }
+
+ seen_insn = TRUE;
+ }
+#endif /* HAVE_SH64 */
+
opcode = find_cooked_opcode (&str);
op_end = str;
if (opcode->arg[0] == A_BDISP12
|| opcode->arg[0] == A_BDISP8)
{
+ /* Since we skip get_specific here, we have to check & update
+ valid_arch now. */
+ if (valid_arch & opcode->arch)
+ valid_arch &= opcode->arch;
+ else
+ as_bad (_("Delayed branches not available on SH1"));
parse_exp (op_end + 1, &operand[0]);
build_relax (opcode, &operand[0]);
}
symbolS *
md_undefined_symbol (name)
- char *name;
+ char *name ATTRIBUTE_UNUSED;
{
-#ifdef OBJ_ELF
- /* Under ELF we need to default _GLOBAL_OFFSET_TABLE. Otherwise we
- have no need to default values of symbols. */
- if (strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0)
- {
- if (!GOT_symbol)
- {
- if (symbol_find (name))
- as_bad ("GOT already in the symbol table");
-
- GOT_symbol = symbol_new (name, undefined_section,
- (valueT)0, & zero_address_frag);
- }
-
- return GOT_symbol;
- }
-#endif /* OBJ_ELF */
-
return 0;
}
void
tc_crawl_symbol_chain (headers)
- object_headers *headers;
+ object_headers *headers ATTRIBUTE_UNUSED;
{
printf (_("call to tc_crawl_symbol_chain \n"));
}
void
tc_headers_hook (headers)
- object_headers *headers;
+ object_headers *headers ATTRIBUTE_UNUSED;
{
printf (_("call to tc_headers_hook \n"));
}
demand_empty_rest_of_line ();
}
\f
-CONST char *md_shortopts = "";
+const char *md_shortopts = "";
struct option md_longopts[] =
{
#define OPTION_RELAX (OPTION_MD_BASE)
#define OPTION_LITTLE (OPTION_BIG + 1)
#define OPTION_SMALL (OPTION_LITTLE + 1)
#define OPTION_DSP (OPTION_SMALL + 1)
+#define OPTION_ISA (OPTION_DSP + 1)
{"relax", no_argument, NULL, OPTION_RELAX},
{"big", no_argument, NULL, OPTION_BIG},
{"little", no_argument, NULL, OPTION_LITTLE},
{"small", no_argument, NULL, OPTION_SMALL},
{"dsp", no_argument, NULL, OPTION_DSP},
+ {"isa", required_argument, NULL, OPTION_ISA},
+#ifdef HAVE_SH64
+#define OPTION_ABI (OPTION_ISA + 1)
+#define OPTION_NO_MIX (OPTION_ABI + 1)
+#define OPTION_SHCOMPACT_CONST_CRANGE (OPTION_NO_MIX + 1)
+#define OPTION_NO_EXPAND (OPTION_SHCOMPACT_CONST_CRANGE + 1)
+#define OPTION_PT32 (OPTION_NO_EXPAND + 1)
+ {"abi", required_argument, NULL, OPTION_ABI},
+ {"no-mix", no_argument, NULL, OPTION_NO_MIX},
+ {"shcompact-const-crange", no_argument, NULL, OPTION_SHCOMPACT_CONST_CRANGE},
+ {"no-expand", no_argument, NULL, OPTION_NO_EXPAND},
+ {"expand-pt32", no_argument, NULL, OPTION_PT32},
+#endif /* HAVE_SH64 */
+
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof (md_longopts);
break;
case OPTION_DSP:
- sh_dsp = 1;
+ preset_target_arch = arch_sh1_up & ~arch_sh3e_up;
+ break;
+
+ case OPTION_ISA:
+ if (strcasecmp (arg, "sh4") == 0)
+ preset_target_arch = arch_sh4;
+ else if (strcasecmp (arg, "any") == 0)
+ preset_target_arch = arch_sh1_up;
+#ifdef HAVE_SH64
+ else if (strcasecmp (arg, "shmedia") == 0)
+ {
+ if (sh64_isa_mode == sh64_isa_shcompact)
+ as_bad (_("Invalid combination: --isa=SHcompact with --isa=SHmedia"));
+ sh64_isa_mode = sh64_isa_shmedia;
+ }
+ else if (strcasecmp (arg, "shcompact") == 0)
+ {
+ if (sh64_isa_mode == sh64_isa_shmedia)
+ as_bad (_("Invalid combination: --isa=SHmedia with --isa=SHcompact"));
+ if (sh64_abi == sh64_abi_64)
+ as_bad (_("Invalid combination: --abi=64 with --isa=SHcompact"));
+ sh64_isa_mode = sh64_isa_shcompact;
+ }
+#endif /* HAVE_SH64 */
+ else
+ as_bad ("Invalid argument to --isa option: %s", arg);
+ break;
+
+#ifdef HAVE_SH64
+ case OPTION_ABI:
+ if (strcmp (arg, "32") == 0)
+ {
+ if (sh64_abi == sh64_abi_64)
+ as_bad (_("Invalid combination: --abi=32 with --abi=64"));
+ sh64_abi = sh64_abi_32;
+ }
+ else if (strcmp (arg, "64") == 0)
+ {
+ if (sh64_abi == sh64_abi_32)
+ as_bad (_("Invalid combination: --abi=64 with --abi=32"));
+ if (sh64_isa_mode == sh64_isa_shcompact)
+ as_bad (_("Invalid combination: --isa=SHcompact with --abi=64"));
+ sh64_abi = sh64_abi_64;
+ }
+ else
+ as_bad ("Invalid argument to --abi option: %s", arg);
break;
+ case OPTION_NO_MIX:
+ sh64_mix = FALSE;
+ break;
+
+ case OPTION_SHCOMPACT_CONST_CRANGE:
+ sh64_shcompact_const_crange = TRUE;
+ break;
+
+ case OPTION_NO_EXPAND:
+ sh64_expand = FALSE;
+ break;
+
+ case OPTION_PT32:
+ sh64_pt32 = TRUE;
+ break;
+#endif /* HAVE_SH64 */
+
default:
return 0;
}
-big generate big endian code\n\
-relax alter jump instructions for long displacements\n\
-small align sections to 4 byte boundaries, not 16\n\
--dsp enable sh-dsp insns, and disable sh3e / sh4 insns.\n"));
+-dsp enable sh-dsp insns, and disable sh2e/sh3e/sh4 insns.\n"));
+#ifdef HAVE_SH64
+ fprintf (stream, _("\
+-isa=[shmedia set default instruction set for SH64\n\
+ | SHmedia\n\
+ | shcompact\n\
+ | SHcompact]\n\
+-abi=[32|64] set size of expanded SHmedia operands and object\n\
+ file type\n\
+-shcompact-const-crange emit code-range descriptors for constants in\n\
+ SHcompact code sections\n\
+-no-mix disallow SHmedia code in the same section as\n\
+ constants and SHcompact code\n\
+-no-expand do not expand MOVI, PT, PTA or PTB instructions\n\
+-expand-pt32 with -abi=64, expand PT, PTA and PTB instructions\n\
+ to 32 bits only"));
+#endif /* HAVE_SH64 */
}
\f
/* This struct is used to pass arguments to sh_count_relocs through
void
sh_frob_file ()
{
+#ifdef HAVE_SH64
+ shmedia_frob_file_before_adjust ();
+#endif
+
if (! sh_relax)
return;
#ifdef BFD_ASSEMBLER
bfd *headers ATTRIBUTE_UNUSED;
#else
- object_headers *headers;
+ object_headers *headers ATTRIBUTE_UNUSED;
#endif
segT seg;
fragS *fragP;
break;
default:
+#ifdef HAVE_SH64
+ shmedia_md_convert_frag (headers, seg, fragP, TRUE);
+#else
abort ();
+#endif
}
if (donerelax && !sh_relax)
BFD_RELOC_SH_ALIGN);
}
-/* This macro decides whether a particular reloc is an entry in a
- switch table. It is used when relaxing, because the linker needs
- to know about all such entries so that it can adjust them if
- necessary. */
+/* See whether the relocation should be resolved locally. */
-#ifdef BFD_ASSEMBLER
-#define SWITCH_TABLE_CONS(fix) (0)
-#else
-#define SWITCH_TABLE_CONS(fix) \
- ((fix)->fx_r_type == 0 \
- && ((fix)->fx_size == 2 \
- || (fix)->fx_size == 1 \
- || (fix)->fx_size == 4))
-#endif
-
-#define SWITCH_TABLE(fix) \
- ((fix)->fx_addsy != NULL \
- && (fix)->fx_subsy != NULL \
- && S_GET_SEGMENT ((fix)->fx_addsy) == text_section \
- && S_GET_SEGMENT ((fix)->fx_subsy) == text_section \
- && ((fix)->fx_r_type == BFD_RELOC_32 \
- || (fix)->fx_r_type == BFD_RELOC_16 \
- || (fix)->fx_r_type == BFD_RELOC_8 \
- || SWITCH_TABLE_CONS (fix)))
+static bfd_boolean
+sh_local_pcrel (fix)
+ fixS *fix;
+{
+ return (! sh_relax
+ && (fix->fx_r_type == BFD_RELOC_SH_PCDISP8BY2
+ || fix->fx_r_type == BFD_RELOC_SH_PCDISP12BY2
+ || fix->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY2
+ || fix->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY4
+ || fix->fx_r_type == BFD_RELOC_8_PCREL
+ || fix->fx_r_type == BFD_RELOC_SH_SWITCH16
+ || fix->fx_r_type == BFD_RELOC_SH_SWITCH32));
+}
/* See whether we need to force a relocation into the output file.
This is used to force out switch and PC relative relocations when
sh_force_relocation (fix)
fixS *fix;
{
+ /* These relocations can't make it into a DSO, so no use forcing
+ them for global symbols. */
+ if (sh_local_pcrel (fix))
+ return 0;
- if (fix->fx_r_type == BFD_RELOC_VTABLE_INHERIT
- || fix->fx_r_type == BFD_RELOC_VTABLE_ENTRY
- || fix->fx_r_type == BFD_RELOC_SH_LOOP_START
- || fix->fx_r_type == BFD_RELOC_SH_LOOP_END)
+ /* Make sure some relocations get emitted. */
+ if (fix->fx_r_type == BFD_RELOC_SH_LOOP_START
+ || fix->fx_r_type == BFD_RELOC_SH_LOOP_END
+ || fix->fx_r_type == BFD_RELOC_SH_TLS_GD_32
+ || fix->fx_r_type == BFD_RELOC_SH_TLS_LD_32
+ || fix->fx_r_type == BFD_RELOC_SH_TLS_IE_32
+ || fix->fx_r_type == BFD_RELOC_SH_TLS_LDO_32
+ || fix->fx_r_type == BFD_RELOC_SH_TLS_LE_32
+ || generic_force_reloc (fix))
return 1;
if (! sh_relax)
|| fix->fx_r_type == BFD_RELOC_SH_ALIGN
|| fix->fx_r_type == BFD_RELOC_SH_CODE
|| fix->fx_r_type == BFD_RELOC_SH_DATA
+#ifdef HAVE_SH64
+ || fix->fx_r_type == BFD_RELOC_SH_SHMEDIA_CODE
+#endif
|| fix->fx_r_type == BFD_RELOC_SH_LABEL);
}
#ifdef OBJ_ELF
-boolean
+bfd_boolean
sh_fix_adjustable (fixP)
fixS *fixP;
{
-
- if (fixP->fx_addsy == NULL)
- return 1;
-
- if (fixP->fx_r_type == BFD_RELOC_SH_PCDISP8BY2
- || fixP->fx_r_type == BFD_RELOC_SH_PCDISP12BY2
- || fixP->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY2
- || fixP->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY4
- || fixP->fx_r_type == BFD_RELOC_8_PCREL
- || fixP->fx_r_type == BFD_RELOC_SH_SWITCH16
- || fixP->fx_r_type == BFD_RELOC_SH_SWITCH32)
- return 1;
-
- if (! TC_RELOC_RTSYM_LOC_FIXUP (fixP)
- || fixP->fx_r_type == BFD_RELOC_32_GOTOFF
+ if (fixP->fx_r_type == BFD_RELOC_32_PLT_PCREL
+ || fixP->fx_r_type == BFD_RELOC_32_GOT_PCREL
+ || fixP->fx_r_type == BFD_RELOC_SH_GOTPC
|| fixP->fx_r_type == BFD_RELOC_RVA)
return 0;
/* Set file-specific flags to indicate if this code needs
a processor with the sh-dsp / sh3e ISA to execute. */
+#ifdef HAVE_SH64
+ /* SH5 and above don't know about the valid_arch arch_sh* bits defined
+ in sh-opc.h, so check SH64 mode before checking valid_arch. */
+ if (sh64_isa_mode != sh64_isa_unspecified)
+ val = EF_SH5;
+ else
+#endif /* HAVE_SH64 */
if (valid_arch & arch_sh1)
val = EF_SH1;
else if (valid_arch & arch_sh2)
val = EF_SH2;
+ else if (valid_arch & arch_sh2e)
+ val = EF_SH2E;
else if (valid_arch & arch_sh_dsp)
val = EF_SH_DSP;
else if (valid_arch & arch_sh3)
char *buf = fixP->fx_where + fixP->fx_frag->fr_literal;
int lowbyte = target_big_endian ? 1 : 0;
int highbyte = target_big_endian ? 0 : 1;
- long val = * (long *) valP;
+ long val = (long) *valP;
long max, min;
int shift;
val -= S_GET_VALUE (fixP->fx_addsy);
#endif
-#ifndef BFD_ASSEMBLER
+#ifdef BFD_ASSEMBLER
+ if (SWITCH_TABLE (fixP))
+ val -= S_GET_VALUE (fixP->fx_subsy);
+#else
if (fixP->fx_r_type == 0)
{
if (fixP->fx_size == 2)
/* Make the jump instruction point to the address of the operand. At
runtime we merely add the offset to the actual PLT entry. */
* valP = 0xfffffffc;
+ val = fixP->fx_offset;
+ if (fixP->fx_subsy)
+ val -= S_GET_VALUE (fixP->fx_subsy);
+ fixP->fx_addnumber = val;
+ md_number_to_chars (buf, val, 4);
break;
case BFD_RELOC_SH_GOTPC:
md_number_to_chars (buf, val, 4);
break;
+ case BFD_RELOC_SH_TLS_GD_32:
+ case BFD_RELOC_SH_TLS_LD_32:
+ case BFD_RELOC_SH_TLS_IE_32:
+ S_SET_THREAD_LOCAL (fixP->fx_addsy);
+ /* Fallthrough */
case BFD_RELOC_32_GOT_PCREL:
+ case BFD_RELOC_SH_GOTPLT32:
* valP = 0; /* Fully resolved at runtime. No addend. */
md_number_to_chars (buf, 0, 4);
break;
+ case BFD_RELOC_SH_TLS_LDO_32:
+ case BFD_RELOC_SH_TLS_LE_32:
+ S_SET_THREAD_LOCAL (fixP->fx_addsy);
+ /* Fallthrough */
case BFD_RELOC_32_GOTOFF:
+ md_number_to_chars (buf, val, 4);
break;
#endif
default:
+#ifdef HAVE_SH64
+ shmedia_md_apply_fix3 (fixP, valP);
+ return;
+#else
abort ();
+#endif
}
if (shift != 0)
switch (fragP->fr_subtype)
{
default:
+#ifdef HAVE_SH64
+ return shmedia_md_estimate_size_before_relax (fragP, segment_type);
+#else
abort ();
+#endif
+
case C (UNCOND_JUMP, UNDEF_DISP):
/* Used to be a branch to somewhere which was unknown. */
valueT use;
int nbytes;
{
+#ifdef HAVE_SH64
+ /* We might need to set the contents type to data. */
+ sh64_flag_output ();
+#endif
+
if (! target_big_endian)
number_to_chars_littleendian (ptr, use, nbytes);
else
number_to_chars_bigendian (ptr, use, nbytes);
}
+/* This version is used in obj-coff.c when not using BFD_ASSEMBLER.
+ eg for the sh-hms target. */
+
+long
+md_pcrel_from (fixP)
+ fixS *fixP;
+{
+ return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address + 2;
+}
+
long
md_pcrel_from_section (fixP, sec)
fixS *fixP;
segT sec;
{
- if (fixP->fx_addsy != (symbolS *) NULL
- && (! S_IS_DEFINED (fixP->fx_addsy)
- || S_IS_EXTERN (fixP->fx_addsy)
- || S_IS_WEAK (fixP->fx_addsy)
+ if (! sh_local_pcrel (fixP)
+ && fixP->fx_addsy != (symbolS *) NULL
+ && (generic_force_reloc (fixP)
|| S_GET_SEGMENT (fixP->fx_addsy) != sec))
{
/* The symbol is undefined (or is defined but not in this section,
return fixP->fx_subsy ? fixP->fx_where + fixP->fx_frag->fr_address : 0;
}
- return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address + 2;
+ return md_pcrel_from (fixP);
}
#ifdef OBJ_COFF
if (SWITCH_TABLE (fixp))
{
- rel->addend = rel->address - S_GET_VALUE (fixp->fx_subsy);
+ *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_subsy);
+ rel->addend = 0;
if (r_type == BFD_RELOC_16)
r_type = BFD_RELOC_SH_SWITCH16;
else if (r_type == BFD_RELOC_8)
rel->addend = 0;
rel->address = rel->addend = fixp->fx_offset;
}
+#ifdef HAVE_SH64
+ else if (shmedia_init_reloc (rel, fixp))
+ ;
+#endif
else if (fixp->fx_pcrel)
rel->addend = fixp->fx_addnumber;
else if (r_type == BFD_RELOC_32 || r_type == BFD_RELOC_32_GOTOFF)
rel->addend = 0;
rel->howto = bfd_reloc_type_lookup (stdoutput, r_type);
+#ifdef OBJ_ELF
+ if (rel->howto->type == R_SH_IND12W)
+ rel->addend += fixp->fx_offset - 4;
+#endif
if (rel->howto == NULL)
{
as_bad_where (fixp->fx_file, fixp->fx_line,
return rel;
}
+#ifdef OBJ_ELF
+inline static char *
+sh_end_of_match (cont, what)
+ char *cont, *what;
+{
+ int len = strlen (what);
+
+ if (strncasecmp (cont, what, strlen (what)) == 0
+ && ! is_part_of_name (cont[len]))
+ return cont + len;
+
+ return NULL;
+}
+
+int
+sh_parse_name (name, exprP, nextcharP)
+ char const *name;
+ expressionS *exprP;
+ char *nextcharP;
+{
+ char *next = input_line_pointer;
+ char *next_end;
+ int reloc_type;
+ segT segment;
+
+ exprP->X_op_symbol = NULL;
+
+ if (strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0)
+ {
+ if (! GOT_symbol)
+ GOT_symbol = symbol_find_or_make (name);
+
+ exprP->X_add_symbol = GOT_symbol;
+ no_suffix:
+ /* If we have an absolute symbol or a reg, then we know its
+ value now. */
+ segment = S_GET_SEGMENT (exprP->X_add_symbol);
+ if (segment == absolute_section)
+ {
+ exprP->X_op = O_constant;
+ exprP->X_add_number = S_GET_VALUE (exprP->X_add_symbol);
+ exprP->X_add_symbol = NULL;
+ }
+ else if (segment == reg_section)
+ {
+ exprP->X_op = O_register;
+ exprP->X_add_number = S_GET_VALUE (exprP->X_add_symbol);
+ exprP->X_add_symbol = NULL;
+ }
+ else
+ {
+ exprP->X_op = O_symbol;
+ exprP->X_add_number = 0;
+ }
+
+ return 1;
+ }
+
+ exprP->X_add_symbol = symbol_find_or_make (name);
+
+ if (*nextcharP != '@')
+ goto no_suffix;
+ else if ((next_end = sh_end_of_match (next + 1, "GOTOFF")))
+ reloc_type = BFD_RELOC_32_GOTOFF;
+ else if ((next_end = sh_end_of_match (next + 1, "GOTPLT")))
+ reloc_type = BFD_RELOC_SH_GOTPLT32;
+ else if ((next_end = sh_end_of_match (next + 1, "GOT")))
+ reloc_type = BFD_RELOC_32_GOT_PCREL;
+ else if ((next_end = sh_end_of_match (next + 1, "PLT")))
+ reloc_type = BFD_RELOC_32_PLT_PCREL;
+ else if ((next_end = sh_end_of_match (next + 1, "TLSGD")))
+ reloc_type = BFD_RELOC_SH_TLS_GD_32;
+ else if ((next_end = sh_end_of_match (next + 1, "TLSLDM")))
+ reloc_type = BFD_RELOC_SH_TLS_LD_32;
+ else if ((next_end = sh_end_of_match (next + 1, "GOTTPOFF")))
+ reloc_type = BFD_RELOC_SH_TLS_IE_32;
+ else if ((next_end = sh_end_of_match (next + 1, "TPOFF")))
+ reloc_type = BFD_RELOC_SH_TLS_LE_32;
+ else if ((next_end = sh_end_of_match (next + 1, "DTPOFF")))
+ reloc_type = BFD_RELOC_SH_TLS_LDO_32;
+ else
+ goto no_suffix;
+
+ *input_line_pointer = *nextcharP;
+ input_line_pointer = next_end;
+ *nextcharP = *input_line_pointer;
+ *input_line_pointer = '\0';
+
+ exprP->X_op = O_PIC_reloc;
+ exprP->X_add_number = 0;
+ exprP->X_md = reloc_type;
+
+ return 1;
+}
+#endif
#endif /* BFD_ASSEMBLER */
projects / deliverable / binutils-gdb.git / blobdiff