/* This file is tc-sh.h
- Copyright (C) 1993, 94, 95, 96, 97, 98, 1999 Free Software Foundation, Inc.
+ Copyright (C) 1993-2015 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ the Free Software Foundation, 51 Franklin Street - Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#define TC_SH
-#define TARGET_BYTES_BIG_ENDIAN 0
-
#define TARGET_ARCH bfd_arch_sh
-#if ANSI_PROTOTYPES
+/* The type fixS is defined (to struct fix) in write.h, but write.h uses
+ definitions from this file. To avoid problems with including write.h
+ after the "right" definitions, don't; just forward-declare struct fix
+ here. */
+struct fix;
struct segment_info_struct;
struct internal_reloc;
-#endif
-
-/* Whether in little endian mode. */
-extern int shl;
/* Whether -relax was used. */
extern int sh_relax;
/* We require .long, et. al., to be aligned correctly. */
#define md_cons_align(nbytes) sh_cons_align (nbytes)
-extern void sh_cons_align PARAMS ((int));
+extern void sh_cons_align (int);
+
+/* We need to optimize expr with taking account of rs_align_test
+ frags. */
+
+#ifdef OBJ_ELF
+#define md_optimize_expr(l,o,r) sh_optimize_expr (l, o, r)
+extern int sh_optimize_expr (expressionS *, operatorT, expressionS *);
+#endif
/* When relaxing, we need to generate relocations for alignment
directives. */
#define HANDLE_ALIGN(frag) sh_handle_align (frag)
-extern void sh_handle_align PARAMS ((fragS *));
+extern void sh_handle_align (fragS *);
+
+#define MAX_MEM_FOR_RS_ALIGN_CODE (1 + 2)
/* We need to force out some relocations when relaxing. */
#define TC_FORCE_RELOCATION(fix) sh_force_relocation (fix)
-extern int sh_force_relocation ();
-
-#ifdef OBJ_ELF
-#define obj_fix_adjustable(fixP) sh_fix_adjustable(fixP)
-struct fix;
-extern boolean sh_fix_adjustable PARAMS ((struct fix *));
-#endif
+extern int sh_force_relocation (struct fix *);
+
+/* This macro decides whether a particular reloc is an entry in a
+ switch table. It is used when relaxing, because the linker needs
+ to know about all such entries so that it can adjust them if
+ necessary. */
+
+#define SWITCH_TABLE(FIX) \
+ ((FIX)->fx_addsy != NULL \
+ && (FIX)->fx_subsy != NULL \
+ && S_GET_SEGMENT ((FIX)->fx_addsy) == text_section \
+ && S_GET_SEGMENT ((FIX)->fx_subsy) == text_section \
+ && ((FIX)->fx_r_type == BFD_RELOC_32 \
+ || (FIX)->fx_r_type == BFD_RELOC_16 \
+ || (FIX)->fx_r_type == BFD_RELOC_8))
+
+#define TC_FORCE_RELOCATION_SUB_SAME(FIX, SEC) \
+ (! SEG_NORMAL (SEC) \
+ || TC_FORCE_RELOCATION (FIX) \
+ || (sh_relax && SWITCH_TABLE (FIX)))
+
+/* Don't complain when we leave fx_subsy around. */
+#define TC_VALIDATE_FIX_SUB(FIX, SEG) \
+ ((md_register_arithmetic || (SEG) != reg_section) \
+ && sh_relax && SWITCH_TABLE (FIX))
+
+#define MD_PCREL_FROM_SECTION(FIX, SEC) md_pcrel_from_section (FIX, SEC)
+extern long md_pcrel_from_section (struct fix *, segT);
+
+/* SH_COUNT relocs are allowed outside of frag.
+ The target is also buggy and sets fix size too large for other relocs. */
+#define TC_FX_SIZE_SLACK(FIX) \
+ ((FIX)->fx_r_type == BFD_RELOC_SH_COUNT ? -1 : 2)
#define IGNORE_NONSTANDARD_ESCAPES
-#define LISTING_HEADER (shl ? "Hitachi Super-H GAS Little Endian" : "Hitachi Super-H GAS Big Endian")
+#define LISTING_HEADER \
+ (!target_big_endian \
+ ? "Renesas / SuperH SH GAS Little Endian" \
+ : "Renesas / SuperH SH GAS Big Endian")
#define md_operand(x)
extern const struct relax_type md_relax_table[];
#define TC_GENERIC_RELAX_TABLE md_relax_table
-/* We use a special alignment function to insert the correct nop
- pattern. */
-extern int sh_do_align PARAMS ((int, const char *, int, int));
-#define md_do_align(n,fill,len,max,l) if (sh_do_align (n,fill,len,max)) goto l
-
/* We record, for each section, whether we have most recently output a
CODE reloc or a DATA reloc. */
struct sh_segment_info_type
/* We call a routine to emit a reloc for a label, so that the linker
can align loads and stores without crossing a label. */
-extern void sh_frob_label PARAMS ((void));
-#define tc_frob_label(sym) sh_frob_label ()
+extern void sh_frob_label (symbolS *);
+#define tc_frob_label(sym) sh_frob_label (sym)
/* We call a routine to flush pending output in order to output a DATA
reloc when required. */
-extern void sh_flush_pending_output PARAMS ((void));
+extern void sh_flush_pending_output (void);
#define md_flush_pending_output() sh_flush_pending_output ()
-#ifdef BFD_ASSEMBLER
#define tc_frob_file_before_adjust sh_frob_file
-#else
-#define tc_frob_file sh_frob_file
-#endif
-extern void sh_frob_file PARAMS ((void));
+extern void sh_frob_file (void);
+
#ifdef OBJ_COFF
/* COFF specific definitions. */
-#define DO_NOT_STRIP 0
-
-/* This macro translates between an internal fix and an coff reloc type */
-#define TC_COFF_FIX2RTYPE(fix) ((fix)->fx_r_type)
-
-#define BFD_ARCH TARGET_ARCH
+#define COFF_MAGIC (!target_big_endian ? SH_ARCH_MAGIC_LITTLE : SH_ARCH_MAGIC_BIG)
-#define COFF_MAGIC (shl ? SH_ARCH_MAGIC_LITTLE : SH_ARCH_MAGIC_BIG)
-
-/* We need to write out relocs which have not been completed. */
-#define TC_COUNT_RELOC(fix) ((fix)->fx_addsy != NULL)
-
-#define TC_RELOC_MANGLE(seg, fix, int, paddr) \
- sh_coff_reloc_mangle ((seg), (fix), (int), (paddr))
-extern void sh_coff_reloc_mangle
- PARAMS ((struct segment_info_struct *, struct fix *,
- struct internal_reloc *, unsigned int));
-
-#define tc_coff_symbol_emit_hook(a) ; /* not used */
-
-#define NEED_FX_R_TYPE 1
+#define tc_coff_symbol_emit_hook(a) ; /* Not used. */
#define TC_KEEP_FX_OFFSET 1
-#define TC_COFF_SIZEMACHDEP(frag) tc_coff_sizemachdep(frag)
-extern int tc_coff_sizemachdep PARAMS ((fragS *));
+#define SEG_NAME(SEG) segment_name (SEG)
/* We align most sections to a 16 byte boundary. */
-#define SUB_SEGMENT_ALIGN(SEG) \
- (strncmp (obj_segment_name (SEG), ".stabstr", 8) == 0 \
- ? 0 \
- : ((strncmp (obj_segment_name (SEG), ".stab", 5) == 0 \
- || strcmp (obj_segment_name (SEG), ".ctors") == 0 \
- || strcmp (obj_segment_name (SEG), ".dtors") == 0) \
- ? 2 \
+#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) \
+ (strncmp (SEG_NAME (SEG), ".stabstr", 8) == 0 \
+ ? 0 \
+ : ((strncmp (SEG_NAME (SEG), ".stab", 5) == 0 \
+ || strcmp (SEG_NAME (SEG), ".ctors") == 0 \
+ || strcmp (SEG_NAME (SEG), ".dtors") == 0) \
+ ? 2 \
: (sh_small ? 2 : 4)))
#endif /* OBJ_COFF */
#ifdef OBJ_ELF
/* ELF specific definitions. */
-/* Whether or not the target is big endian */
+/* Whether or not the target is big endian. */
extern int target_big_endian;
+#ifdef TE_LINUX
+#define TARGET_FORMAT (!target_big_endian ? "elf32-sh-linux" : "elf32-shbig-linux")
+#elif defined(TE_NetBSD)
+#define TARGET_FORMAT (!target_big_endian ? "elf32-shl-nbsd" : "elf32-sh-nbsd")
+#elif defined TARGET_SYMBIAN
+#define TARGET_FORMAT (!target_big_endian ? "elf32-shl-symbian" : "elf32-sh-symbian")
+#elif defined (TE_VXWORKS)
+#define TARGET_FORMAT (!target_big_endian ? "elf32-shl-vxworks" : "elf32-sh-vxworks")
+#elif defined (TE_UCLINUX)
+#define TARGET_FORMAT sh_uclinux_target_format ()
+extern const char * sh_uclinux_target_format (void);
+#else
+#define TARGET_FORMAT (!target_big_endian ? "elf32-shl" : "elf32-sh")
+#endif
-#define TARGET_FORMAT (shl ? "elf32-shl" : "elf32-sh")
+#define elf_tc_final_processing sh_elf_final_processing
+extern void sh_elf_final_processing (void);
+
+#define DIFF_EXPR_OK /* foo-. gets turned into PC relative relocs. */
+
+#define GLOBAL_OFFSET_TABLE_NAME "_GLOBAL_OFFSET_TABLE_"
+
+/* This is the relocation type for direct references to
+ GLOBAL_OFFSET_TABLE. It comes up in complicated expressions such
+ as _GLOBAL_OFFSET_TABLE_+[.-.L284], which cannot be expressed
+ normally with the regular expressions. The fixup specified here
+ when used at runtime implies that we should add the address of the
+ GOT to the specified location, and as a result we have simplified
+ the expression into something we can use. */
+#define TC_RELOC_GLOBAL_OFFSET_TABLE BFD_RELOC_SH_GOTPC
+
+#define tc_fix_adjustable(FIX) sh_fix_adjustable(FIX)
+extern bfd_boolean sh_fix_adjustable (struct fix *);
+
+/* Values passed to md_apply_fix don't include symbol values. */
+#define MD_APPLY_SYM_VALUE(FIX) 0
+
+/* This expression evaluates to true if the relocation is for a local object
+ for which we still want to do the relocation at runtime. False if we
+ are willing to perform this relocation while building the .o file.
+
+ We can't resolve references to the GOT or the PLT when creating the
+ object file, since these tables are only created by the linker.
+ Also, if the symbol is global, weak, common or not defined, the
+ assembler can't compute the appropriate reloc, since its location
+ can only be determined at link time. */
+
+#define TC_FORCE_RELOCATION_LOCAL(FIX) \
+ (!(FIX)->fx_pcrel \
+ || (FIX)->fx_r_type == BFD_RELOC_32_PLT_PCREL \
+ || (FIX)->fx_r_type == BFD_RELOC_32_GOT_PCREL \
+ || (FIX)->fx_r_type == BFD_RELOC_SH_GOTPC \
+ || TC_FORCE_RELOCATION (FIX))
+
+#define TC_FORCE_RELOCATION_SUB_LOCAL(FIX, SEG) \
+ ((!md_register_arithmetic && (SEG) == reg_section) \
+ || (sh_relax && SWITCH_TABLE (FIX)))
+
+/* This keeps the subtracted symbol around, for use by PLT_PCREL
+ relocs. */
+#define TC_FORCE_RELOCATION_SUB_ABS(FIX, SEG) \
+ ((FIX)->fx_r_type == BFD_RELOC_32_PLT_PCREL \
+ || (!md_register_arithmetic && (SEG) == reg_section))
+
+/* Don't complain when we leave fx_subsy around. */
+#undef TC_VALIDATE_FIX_SUB
+#define TC_VALIDATE_FIX_SUB(FIX, SEG) \
+ ((md_register_arithmetic || (SEG) != reg_section) \
+ && ((FIX)->fx_r_type == BFD_RELOC_32_PLT_PCREL \
+ || (sh_relax && SWITCH_TABLE (FIX))))
+
+#define md_parse_name(name, exprP, mode, nextcharP) \
+ sh_parse_name ((name), (exprP), (mode), (nextcharP))
+int sh_parse_name (char const *, expressionS *,
+ enum expr_mode, char *);
+
+#define TC_CONS_FIX_NEW(FRAG, OFF, LEN, EXP, RELOC) \
+ sh_cons_fix_new ((FRAG), (OFF), (LEN), (EXP), (RELOC))
+void sh_cons_fix_new (fragS *, int, int, expressionS *,
+ bfd_reloc_code_real_type);
+
+/* This is used to construct expressions out of @GOTOFF, @PLT and @GOT
+ symbols. The relocation type is stored in X_md. */
+#define O_PIC_reloc O_md1
+
+#define TARGET_USE_CFIPOP 1
+
+#define tc_cfi_frame_initial_instructions sh_cfi_frame_initial_instructions
+extern void sh_cfi_frame_initial_instructions (void);
+
+#define tc_regname_to_dw2regnum sh_regname_to_dw2regnum
+extern int sh_regname_to_dw2regnum (char *);
+
+/* All SH instructions are multiples of 16 bits. */
+#define DWARF2_LINE_MIN_INSN_LENGTH 2
+#define DWARF2_DEFAULT_RETURN_COLUMN 17
+#define DWARF2_CIE_DATA_ALIGNMENT (-4)
#endif /* OBJ_ELF */
-/* end of tc-sh.h */
+#define H_TICK_HEX 1