/* tc-vax.c - vax-specific -
- Copyright (C) 1987, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1987, 1991, 1992, 1993, 1994, 1995, 1998, 2000, 2001, 2002,
+ 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-/* JF I moved almost all the vax specific stuff into this one file 'cuz RMS
- seems to think its a good idea. I hope I managed to get all the VAX-isms */
-
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
#include "as.h"
-#include "read.h"
#include "vax-inst.h"
#include "obstack.h" /* For FRAG_APPEND_1_CHAR macro in "frags.h" */
+#include "subsegs.h"
+#include "safe-ctype.h"
+
+#ifdef OBJ_ELF
+#include "elf/vax.h"
+#endif
/* These chars start a comment anywhere in a source file (except inside
another comment */
const char comment_chars[] = "#";
-/* These chars only start a comment at the beginning of a line. */
-/* Note that for the VAX the are the same as comment_chars above. */
+/* These chars only start a comment at the beginning of a line. */
+/* Note that for the VAX the are the same as comment_chars above. */
const char line_comment_chars[] = "#";
-const char line_separator_chars[] = "";
+const char line_separator_chars[] = ";";
-/* Chars that can be used to separate mant from exp in floating point nums */
+/* Chars that can be used to separate mant from exp in floating point nums. */
const char EXP_CHARS[] = "eE";
-/* Chars that mean this number is a floating point constant */
-/* as in 0f123.456 */
-/* or 0H1.234E-12 (see exp chars above) */
+/* Chars that mean this number is a floating point constant
+ as in 0f123.456
+ or 0H1.234E-12 (see exp chars above). */
const char FLT_CHARS[] = "dDfFgGhH";
/* Also be aware that MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT may have to be
changed in read.c . Ideally it shouldn't have to know about it at all,
- but nothing is ideal around here.
- */
+ but nothing is ideal around here. */
-static expressionS /* Hold details of an operand expression */
- exp_of_operand[VIT_MAX_OPERANDS];
+/* Hold details of an operand expression. */
+static expressionS exp_of_operand[VIT_MAX_OPERANDS];
+static segT seg_of_operand[VIT_MAX_OPERANDS];
-static struct vit
- v; /* A vax instruction after decoding. */
+/* A vax instruction after decoding. */
+static struct vit v;
+/* Hold details of big operands. */
LITTLENUM_TYPE big_operand_bits[VIT_MAX_OPERANDS][SIZE_OF_LARGE_NUMBER];
-/* Hold details of big operands. */
FLONUM_TYPE float_operand[VIT_MAX_OPERANDS];
-/* Above is made to point into */
-/* big_operand_bits by md_begin(). */
+/* Above is made to point into big_operand_bits by md_begin(). */
+
+#ifdef OBJ_ELF
+#define GLOBAL_OFFSET_TABLE_NAME "_GLOBAL_OFFSET_TABLE_"
+#define PROCEDURE_LINKAGE_TABLE_NAME "_PROCEDURE_LINKAGE_TABLE_"
+symbolS *GOT_symbol; /* Pre-defined "_GLOBAL_OFFSET_TABLE_". */
+symbolS *PLT_symbol; /* Pre-defined "_PROCEDURE_LINKAGE_TABLE_". */
+#endif
+
+int flag_hash_long_names; /* -+ */
+int flag_one; /* -1 */
+int flag_show_after_trunc; /* -H */
+int flag_no_hash_mixed_case; /* -h NUM */
+#ifdef OBJ_ELF
+int flag_want_pic; /* -k */
+#endif
\f
-/*
- * For VAX, relative addresses of "just the right length" are easy.
- * The branch displacement is always the last operand, even in
- * synthetic instructions.
- * For VAX, we encode the relax_substateTs (in e.g. fr_substate) as:
- *
- * 4 3 2 1 0 bit number
- * ---/ /--+-------+-------+-------+-------+-------+
- * | what state ? | how long ? |
- * ---/ /--+-------+-------+-------+-------+-------+
- *
- * The "how long" bits are 00=byte, 01=word, 10=long.
- * This is a Un*x convention.
- * Not all lengths are legit for a given value of (what state).
- * The "how long" refers merely to the displacement length.
- * The address usually has some constant bytes in it as well.
- *
+/* For VAX, relative addresses of "just the right length" are easy.
+ The branch displacement is always the last operand, even in
+ synthetic instructions.
+ For VAX, we encode the relax_substateTs (in e.g. fr_substate) as:
+
+ 4 3 2 1 0 bit number
+ ---/ /--+-------+-------+-------+-------+-------+
+ | what state ? | how long ? |
+ ---/ /--+-------+-------+-------+-------+-------+
+
+ The "how long" bits are 00=byte, 01=word, 10=long.
+ This is a Un*x convention.
+ Not all lengths are legit for a given value of (what state).
+ The "how long" refers merely to the displacement length.
+ The address usually has some constant bytes in it as well.
groups for VAX address relaxing.
bbcs e3
bbsc e4
bbcc e5
- bbssi e6
- bbcci e7
Always, you complement 0th bit to reverse condition.
Always, 1-byte opcde, longword-address, byte-address, 1-byte-displacement
We can change an opcode's lowest order bit without breaking anything else.
We sometimes store context in the operand literal. This way we can figure out
- after relax() what the original addressing mode was.
- */
+ after relax() what the original addressing mode was. */
\f
-/* These displacements are relative to */
-/* the start address of the displacement. */
-/* The first letter is Byte, Word. */
-/* 2nd letter is Forward, Backward. */
+/* These displacements are relative to the start address of the
+ displacement. The first letter is Byte, Word. 2nd letter is
+ Forward, Backward. */
#define BF (1+ 127)
#define BB (1+-128)
#define WF (2+ 32767)
#define WB (2+-32768)
-/* Dont need LF, LB because they always */
-/* reach. [They are coded as 0.] */
-
+/* Dont need LF, LB because they always reach. [They are coded as 0.] */
#define C(a,b) ENCODE_RELAX(a,b)
-/* This macro has no side-effects. */
+/* This macro has no side-effects. */
#define ENCODE_RELAX(what,length) (((what) << 2) + (length))
+#define RELAX_STATE(s) ((s) >> 2)
+#define RELAX_LENGTH(s) ((s) & 3)
-const relax_typeS
- md_relax_table[] =
+const relax_typeS md_relax_table[] =
{
{1, 1, 0, 0}, /* error sentinel 0,0 */
{1, 1, 0, 0}, /* unused 0,1 */
{1, 1, 0, 0}, /* unused 0,2 */
{1, 1, 0, 0}, /* unused 0,3 */
+
{BF + 1, BB + 1, 2, C (1, 1)},/* B^"foo" 1,0 */
{WF + 1, WB + 1, 3, C (1, 2)},/* W^"foo" 1,1 */
{0, 0, 5, 0}, /* L^"foo" 1,2 */
{1, 1, 0, 0}, /* unused 1,3 */
+
{BF, BB, 1, C (2, 1)}, /* b<cond> B^"foo" 2,0 */
{WF + 2, WB + 2, 4, C (2, 2)},/* br.+? brw X 2,1 */
{0, 0, 7, 0}, /* br.+? jmp X 2,2 */
{1, 1, 0, 0}, /* unused 2,3 */
+
{BF, BB, 1, C (3, 1)}, /* brb B^foo 3,0 */
{WF, WB, 2, C (3, 2)}, /* brw W^foo 3,1 */
{0, 0, 5, 0}, /* Jmp L^foo 3,2 */
{1, 1, 0, 0}, /* unused 3,3 */
+
{1, 1, 0, 0}, /* unused 4,0 */
{WF, WB, 2, C (4, 2)}, /* acb_ ^Wfoo 4,1 */
{0, 0, 10, 0}, /* acb_,br,jmp L^foo4,2 */
{1, 1, 0, 0}, /* unused 4,3 */
+
{BF, BB, 1, C (5, 1)}, /* Xob___,,foo 5,0 */
{WF + 4, WB + 4, 6, C (5, 2)},/* Xob.+2,brb.+3,brw5,1 */
{0, 0, 9, 0}, /* Xob.+2,brb.+6,jmp5,2 */
+ {1, 1, 0, 0}, /* unused 5,3 */
};
#undef C
#undef WF
#undef WB
-void float_cons ();
+void float_cons (int);
+int flonum_gen2vax (char, FLONUM_TYPE *, LITTLENUM_TYPE *);
const pseudo_typeS md_pseudo_table[] =
{
{"ffloat", float_cons, 'f'},
{"gfloat", float_cons, 'g'},
{"hfloat", float_cons, 'h'},
- {0},
+ {"d_floating", float_cons, 'd'},
+ {"f_floating", float_cons, 'f'},
+ {"g_floating", float_cons, 'g'},
+ {"h_floating", float_cons, 'h'},
+ {NULL, NULL, 0},
};
#define STATE_PC_RELATIVE (1)
#define STATE_CONDITIONAL_BRANCH (2)
-#define STATE_ALWAYS_BRANCH (3) /* includes BSB... */
+#define STATE_ALWAYS_BRANCH (3) /* includes BSB... */
#define STATE_COMPLEX_BRANCH (4)
#define STATE_COMPLEX_HOP (5)
#define STATE_BYTE (0)
#define STATE_WORD (1)
#define STATE_LONG (2)
-#define STATE_UNDF (3) /* Symbol undefined in pass1 */
-
+#define STATE_UNDF (3) /* Symbol undefined in pass1. */
#define min(a, b) ((a) < (b) ? (a) : (b))
-
-#if __STDC__ == 1
-
-int flonum_gen2vax (char format_letter, FLONUM_TYPE * f, LITTLENUM_TYPE * words);
-static void vip_end (void);
-static void vip_op_defaults (char *immediate, char *indirect, char *displen);
-
-#else /* not __STDC__ */
-
-int flonum_gen2vax ();
-static void vip_end ();
-static void vip_op_defaults ();
-
-#endif /* not __STDC__ */
-
-void
-md_begin ()
-{
- char *vip_begin ();
- char *errtxt;
- FLONUM_TYPE *fP;
- int i;
-
- if (*(errtxt = vip_begin (1, "$", "*", "`")))
- {
- as_fatal ("VIP_BEGIN error:%s", errtxt);
- }
-
- for (i = 0, fP = float_operand;
- fP < float_operand + VIT_MAX_OPERANDS;
- i++, fP++)
- {
- fP->low = &big_operand_bits[i][0];
- fP->high = &big_operand_bits[i][SIZE_OF_LARGE_NUMBER - 1];
- }
-}
-
-void
-md_end ()
-{
- vip_end ();
-}
\f
-void /* Knows about order of bytes in address. */
-md_number_to_chars (con, value, nbytes)
- char con[]; /* Return 'nbytes' of chars here. */
- long value; /* The value of the bits. */
- int nbytes; /* Number of bytes in the output. */
+void
+md_number_to_chars (char con[], valueT value, int nbytes)
{
- int n;
- long v;
-
- n = nbytes;
- v = value;
- while (nbytes--)
- {
- *con++ = value; /* Lint wants & MASK_CHAR. */
- value >>= BITS_PER_CHAR;
- }
- /* XXX line number probably botched for this warning message. */
- if (value != 0 && value != -1)
- as_bad ("Displacement (%ld) long for instruction field length (%d).", v, n);
+ number_to_chars_littleendian (con, value, nbytes);
}
/* Fix up some data or instructions after we find out the value of a symbol
that they reference. */
-void /* Knows about order of bytes in address. */
-md_apply_fix (fixP, value)
- fixS *fixP; /* Fixup struct pointer */
- long value; /* The value of the bits. */
+void /* Knows about order of bytes in address. */
+md_apply_fix (fixS *fixP, valueT *valueP, segT seg ATTRIBUTE_UNUSED)
{
- char *buf = fixP->fx_where + fixP->fx_frag->fr_literal;
- int nbytes; /* Number of bytes in the output. */
+ valueT value = * valueP;
- nbytes = fixP->fx_size;
- while (nbytes--)
- {
- *buf++ = value; /* Lint wants & MASK_CHAR. */
- value >>= BITS_PER_CHAR;
- }
+ if (((fixP->fx_addsy == NULL && fixP->fx_subsy == NULL)
+ && fixP->fx_r_type != BFD_RELOC_32_PLT_PCREL
+ && fixP->fx_r_type != BFD_RELOC_32_GOT_PCREL)
+ || fixP->fx_r_type == NO_RELOC)
+ number_to_chars_littleendian (fixP->fx_where + fixP->fx_frag->fr_literal,
+ value, fixP->fx_size);
+
+ if (fixP->fx_addsy == NULL && fixP->fx_pcrel == 0)
+ fixP->fx_done = 1;
}
-long /* Knows about the byte order in a word. */
-md_chars_to_number (con, nbytes)
- unsigned char con[]; /* Low order byte 1st. */
- int nbytes; /* Number of bytes in the input. */
+/* Convert a number from VAX byte order (little endian)
+ into host byte order.
+ con is the buffer to convert,
+ nbytes is the length of the given buffer. */
+static long
+md_chars_to_number (unsigned char con[], int nbytes)
{
long retval;
+
for (retval = 0, con += nbytes - 1; nbytes--; con--)
{
retval <<= BITS_PER_CHAR;
}
return retval;
}
-\f
-/* vax:md_assemble() emit frags for 1 instruction */
-void
-md_assemble (instruction_string)
- char *instruction_string; /* A string: assemble 1 instruction. */
+/* Copy a bignum from in to out.
+ If the output is shorter than the input, copy lower-order
+ littlenums. Return 0 or the number of significant littlenums
+ dropped. Assumes littlenum arrays are densely packed: no unused
+ chars between the littlenums. Uses memcpy() to move littlenums, and
+ wants to know length (in chars) of the input bignum. */
+
+static int
+bignum_copy (LITTLENUM_TYPE *in,
+ int in_length, /* in sizeof(littlenum)s */
+ LITTLENUM_TYPE *out,
+ int out_length /* in sizeof(littlenum)s */)
{
- /* We saw no errors in any operands - try to make frag(s) */
- int is_undefined; /* 1 if operand expression's */
- /* segment not known yet. */
- int length_code;
-
- char *p;
- register struct vop *operandP;/* An operand. Scans all operands. */
- char *save_input_line_pointer;
- char c_save; /* What used to live after an expression. */
- /* fixme: unused? */
- /* struct frag *fragP; *//* Fragment of code we just made. */
- register int goofed; /* 1: instruction_string bad for all passes. */
- register struct vop *end_operandP; /* -> slot just after last operand */
- /* Limit of the for (each operand). */
- register expressionS *expP; /* -> expression values for this operand */
-
- /* These refer to an instruction operand expression. */
- segT to_seg; /* Target segment of the address. */
- register valueT this_add_number;
- register struct symbol *this_add_symbol; /* +ve (minuend) symbol. */
- register struct symbol *this_subtract_symbol; /* -ve(subtrahend) symbol. */
-
- long opcode_as_number; /* As a number. */
- char *opcode_as_chars; /* Least significant byte 1st. */
- /* As an array of characters. */
- char *opcode_low_byteP; /* Least significant byte 1st */
- /* richfix: unused? */
- /* struct details *detP; *//* The details of an ADxxx frag. */
- int length; /* length (bytes) meant by vop_short. */
- int at; /* 0, or 1 if '@' is in addressing mode. */
- int nbytes; /* From vop_nbytes: vax_operand_width (in bytes) */
- FLONUM_TYPE *floatP;
- char *vip ();
- LITTLENUM_TYPE literal_float[8];
- /* Big enough for any floating point literal. */
+ int significant_littlenums_dropped;
- if (*(p = vip (&v, instruction_string)))
+ if (out_length < in_length)
{
- as_fatal ("vax_assemble\"%s\" in=\"%s\"", p, instruction_string);
+ LITTLENUM_TYPE *p; /* -> most significant (non-zero) input
+ littlenum. */
+
+ memcpy ((void *) out, (void *) in,
+ (unsigned int) out_length << LITTLENUM_SHIFT);
+ for (p = in + in_length - 1; p >= in; --p)
+ {
+ if (*p)
+ break;
+ }
+ significant_littlenums_dropped = p - in - in_length + 1;
+
+ if (significant_littlenums_dropped < 0)
+ significant_littlenums_dropped = 0;
}
- /*
- * Now we try to find as many as_warn()s as we can. If we do any as_warn()s
- * then goofed=1. Notice that we don't make any frags yet.
- * Should goofed be 1, then this instruction will wedge in any pass,
- * and we can safely flush it, without causing interpass symbol phase
- * errors. That is, without changing label values in different passes.
- */
- if (goofed = (*v.vit_error))
+ else
{
- as_warn ("Ignoring statement due to \"%s\"", v.vit_error);
- }
- /*
- * We need to use expression() and friends, which require us to diddle
- * input_line_pointer. So we save it and restore it later.
- */
- save_input_line_pointer = input_line_pointer;
- for (operandP = v.vit_operand,
- expP = exp_of_operand,
- floatP = float_operand,
- end_operandP = v.vit_operand + v.vit_operands;
+ memcpy ((char *) out, (char *) in,
+ (unsigned int) in_length << LITTLENUM_SHIFT);
- operandP < end_operandP;
+ if (out_length > in_length)
+ memset ((char *) (out + in_length), '\0',
+ (unsigned int) (out_length - in_length) << LITTLENUM_SHIFT);
+
+ significant_littlenums_dropped = 0;
+ }
- operandP++, expP++, floatP++)
- { /* for each operand */
- if (*(operandP->vop_error))
+ return significant_littlenums_dropped;
+}
+\f
+/* md_estimate_size_before_relax(), called just before relax().
+ Any symbol that is now undefined will not become defined.
+ Return the correct fr_subtype in the frag and the growth beyond
+ fr_fix. */
+int
+md_estimate_size_before_relax (fragS *fragP, segT segment)
+{
+ if (RELAX_LENGTH (fragP->fr_subtype) == STATE_UNDF)
+ {
+ if (S_GET_SEGMENT (fragP->fr_symbol) != segment
+#ifdef OBJ_ELF
+ || S_IS_WEAK (fragP->fr_symbol)
+ || S_IS_EXTERNAL (fragP->fr_symbol)
+#endif
+ )
{
- as_warn ("Ignoring statement because \"%s\"", (operandP->vop_error));
- goofed = 1;
- }
- else
- { /* statement has no syntax goofs: lets sniff the expression */
- int can_be_short = 0; /* 1 if a bignum can be reduced to a short literal. */
+ /* Non-relaxable cases. */
+ int reloc_type = NO_RELOC;
+ char *p;
+ int old_fr_fix;
- input_line_pointer = operandP->vop_expr_begin;
- c_save = operandP->vop_expr_end[1];
- operandP->vop_expr_end[1] = '\0';
- /* If to_seg == SEG_PASS1, expression() will have set need_pass_2 = 1. */
- switch (to_seg = expression (expP))
+ old_fr_fix = fragP->fr_fix;
+ p = fragP->fr_literal + old_fr_fix;
+#ifdef OBJ_ELF
+ /* If this is to an undefined symbol, then if it's an indirect
+ reference indicate that is can mutated into a GLOB_DAT or
+ JUMP_SLOT by the loader. We restrict ourselves to no offset
+ due to a limitation in the NetBSD linker. */
+
+ if (GOT_symbol == NULL)
+ GOT_symbol = symbol_find (GLOBAL_OFFSET_TABLE_NAME);
+ if (PLT_symbol == NULL)
+ PLT_symbol = symbol_find (PROCEDURE_LINKAGE_TABLE_NAME);
+ if ((GOT_symbol == NULL || fragP->fr_symbol != GOT_symbol)
+ && (PLT_symbol == NULL || fragP->fr_symbol != PLT_symbol)
+ && fragP->fr_symbol != NULL
+ && flag_want_pic
+ && (!S_IS_DEFINED (fragP->fr_symbol)
+ || S_IS_WEAK (fragP->fr_symbol)
+ || S_IS_EXTERNAL (fragP->fr_symbol)))
{
- case SEG_ABSENT:
- /* for BSD4.2 compatibility, missing expression is absolute 0 */
- to_seg = expP->X_seg = SEG_ABSOLUTE;
- expP->X_add_number = 0;
- /* for SEG_ABSOLUTE, we shouldnt need to set X_subtract_symbol, X_add_symbol to any
- particular value. But, we will program defensively. Since this situation occurs rarely
- so it costs us little to do, and stops Dean worrying about the origin of random bits in
- expressionS's. */
- expP->X_add_symbol = NULL;
- expP->X_subtract_symbol = NULL;
- case SEG_TEXT:
- case SEG_DATA:
- case SEG_BSS:
- case SEG_ABSOLUTE:
- case SEG_UNKNOWN:
- break;
-
- case SEG_DIFFERENCE:
- case SEG_PASS1:
- /*
- * Major bug. We can't handle the case of a
- * SEG_DIFFERENCE expression in a VIT_OPCODE_SYNTHETIC
- * variable-length instruction.
- * We don't have a frag type that is smart enough to
- * relax a SEG_DIFFERENCE, and so we just force all
- * SEG_DIFFERENCEs to behave like SEG_PASS1s.
- * Clearly, if there is a demand we can invent a new or
- * modified frag type and then coding up a frag for this
- * case will be easy. SEG_DIFFERENCE was invented for the
- * .words after a CASE opcode, and was never intended for
- * instruction operands.
- */
- need_pass_2 = 1;
- as_warn ("Can't relocate expression");
- break;
-
- case SEG_BIG:
- /* Preserve the bits. */
- if (expP->X_add_number > 0)
+ if (p[0] & 0x10)
{
- bignum_copy (generic_bignum, expP->X_add_number,
- floatP->low, SIZE_OF_LARGE_NUMBER);
+ if (flag_want_pic)
+ as_fatal ("PIC reference to %s is indirect.\n",
+ S_GET_NAME (fragP->fr_symbol));
}
else
{
- know (expP->X_add_number < 0);
- flonum_copy (&generic_floating_point_number,
- floatP);
- if (strchr ("s i", operandP->vop_short))
- { /* Could possibly become S^# */
- flonum_gen2vax (-expP->X_add_number, floatP, literal_float);
- switch (-expP->X_add_number)
- {
- case 'f':
- can_be_short =
- (literal_float[0] & 0xFC0F) == 0x4000
- && literal_float[1] == 0;
- break;
-
- case 'd':
- can_be_short =
- (literal_float[0] & 0xFC0F) == 0x4000
- && literal_float[1] == 0
- && literal_float[2] == 0
- && literal_float[3] == 0;
- break;
-
- case 'g':
- can_be_short =
- (literal_float[0] & 0xFF81) == 0x4000
- && literal_float[1] == 0
- && literal_float[2] == 0
- && literal_float[3] == 0;
- break;
-
- case 'h':
- can_be_short = ((literal_float[0] & 0xFFF8) == 0x4000
- && (literal_float[1] & 0xE000) == 0
- && literal_float[2] == 0
- && literal_float[3] == 0
- && literal_float[4] == 0
- && literal_float[5] == 0
- && literal_float[6] == 0
- && literal_float[7] == 0);
- break;
-
- default:
- BAD_CASE (-expP->X_add_number);
- break;
- } /* switch (float type) */
- } /* if (could want to become S^#...) */
- } /* bignum or flonum ? */
-
- if (operandP->vop_short == 's'
- || operandP->vop_short == 'i'
- || (operandP->vop_short == ' '
- && operandP->vop_reg == 0xF
- && (operandP->vop_mode & 0xE) == 0x8))
- {
- /* Saw a '#'. */
- if (operandP->vop_short == ' ')
- { /* We must chose S^ or I^. */
- if (expP->X_add_number > 0)
- { /* Bignum: Short literal impossible. */
- operandP->vop_short = 'i';
- operandP->vop_mode = 8;
- operandP->vop_reg = 0xF; /* VAX PC. */
- }
- else
- { /* Flonum: Try to do it. */
- if (can_be_short)
- {
- operandP->vop_short = 's';
- operandP->vop_mode = 0;
- operandP->vop_ndx = -1;
- operandP->vop_reg = -1;
- /* JF hope this is the right thing */
- expP->X_seg = SEG_ABSOLUTE;
- }
- else
- {
- operandP->vop_short = 'i';
- operandP->vop_mode = 8;
- operandP->vop_reg = 0xF; /* VAX PC */
- }
- } /* bignum or flonum ? */
- } /* if #, but no S^ or I^ seen. */
- /* No more ' ' case: either 's' or 'i'. */
- if (operandP->vop_short == 's')
- {
- /* Wants to be a short literal. */
- if (expP->X_add_number > 0)
- {
- as_warn ("Bignum not permitted in short literal. Immediate mode assumed.");
- operandP->vop_short = 'i';
- operandP->vop_mode = 8;
- operandP->vop_reg = 0xF; /* VAX PC. */
- }
- else
- {
- if (!can_be_short)
- {
- as_warn ("Can't do flonum short literal: immediate mode used.");
- operandP->vop_short = 'i';
- operandP->vop_mode = 8;
- operandP->vop_reg = 0xF; /* VAX PC. */
- }
- else
- { /* Encode short literal now. */
- int temp = 0;
-
- switch (-expP->X_add_number)
- {
- case 'f':
- case 'd':
- temp = literal_float[0] >> 4;
- break;
+ if (((unsigned char *) fragP->fr_opcode)[0] == VAX_CALLS
+ || ((unsigned char *) fragP->fr_opcode)[0] == VAX_CALLG
+ || ((unsigned char *) fragP->fr_opcode)[0] == VAX_JSB
+ || ((unsigned char *) fragP->fr_opcode)[0] == VAX_JMP
+ || S_IS_FUNCTION (fragP->fr_symbol))
+ reloc_type = BFD_RELOC_32_PLT_PCREL;
+ else
+ reloc_type = BFD_RELOC_32_GOT_PCREL;
+ }
+ }
+#endif
+ switch (RELAX_STATE (fragP->fr_subtype))
+ {
+ case STATE_PC_RELATIVE:
+ p[0] |= VAX_PC_RELATIVE_MODE; /* Preserve @ bit. */
+ fragP->fr_fix += 1 + 4;
+ fix_new (fragP, old_fr_fix + 1, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, reloc_type);
+ break;
- case 'g':
- temp = literal_float[0] >> 1;
- break;
+ case STATE_CONDITIONAL_BRANCH:
+ *fragP->fr_opcode ^= 1; /* Reverse sense of branch. */
+ p[0] = 6;
+ p[1] = VAX_JMP;
+ p[2] = VAX_PC_RELATIVE_MODE; /* ...(PC) */
+ fragP->fr_fix += 1 + 1 + 1 + 4;
+ fix_new (fragP, old_fr_fix + 3, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
+ break;
- case 'h':
- temp = ((literal_float[0] << 3) & 070)
- | ((literal_float[1] >> 13) & 07);
- break;
+ case STATE_COMPLEX_BRANCH:
+ p[0] = 2;
+ p[1] = 0;
+ p[2] = VAX_BRB;
+ p[3] = 6;
+ p[4] = VAX_JMP;
+ p[5] = VAX_PC_RELATIVE_MODE; /* ...(pc) */
+ fragP->fr_fix += 2 + 2 + 1 + 1 + 4;
+ fix_new (fragP, old_fr_fix + 6, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
+ break;
- default:
- BAD_CASE (-expP->X_add_number);
- break;
- }
+ case STATE_COMPLEX_HOP:
+ p[0] = 2;
+ p[1] = VAX_BRB;
+ p[2] = 6;
+ p[3] = VAX_JMP;
+ p[4] = VAX_PC_RELATIVE_MODE; /* ...(pc) */
+ fragP->fr_fix += 1 + 2 + 1 + 1 + 4;
+ fix_new (fragP, old_fr_fix + 5, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
+ break;
- floatP->low[0] = temp & 077;
- floatP->low[1] = 0;
- } /* if can be short literal float */
- } /* flonum or bignum ? */
- }
- else
- { /* I^# seen: set it up if float. */
- if (expP->X_add_number < 0)
- {
- memcpy (floatP->low, literal_float, sizeof (literal_float));
- }
- } /* if S^# seen. */
- }
- else
- {
- as_warn ("A bignum/flonum may not be a displacement: 0x%x used",
- expP->X_add_number = 0x80000000);
- /* Chosen so luser gets the most offset bits to patch later. */
- }
- expP->X_add_number = floatP->low[0]
- | ((LITTLENUM_MASK & (floatP->low[1])) << LITTLENUM_NUMBER_OF_BITS);
- /*
- * For the SEG_BIG case we have:
- * If vop_short == 's' then a short floating literal is in the
- * lowest 6 bits of floatP -> low [0], which is
- * big_operand_bits [---] [0].
- * If vop_short == 'i' then the appropriate number of elements
- * of big_operand_bits [---] [...] are set up with the correct
- * bits.
- * Also, just in case width is byte word or long, we copy the lowest
- * 32 bits of the number to X_add_number.
- */
+ case STATE_ALWAYS_BRANCH:
+ *fragP->fr_opcode += VAX_WIDEN_LONG;
+ p[0] = VAX_PC_RELATIVE_MODE; /* ...(PC) */
+ fragP->fr_fix += 1 + 4;
+ fix_new (fragP, old_fr_fix + 1, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
break;
default:
- BAD_CASE (to_seg);
- break;
+ abort ();
}
- if (input_line_pointer != operandP->vop_expr_end + 1)
- {
- as_warn ("Junk at end of expression \"%s\"", input_line_pointer);
- goofed = 1;
- }
- operandP->vop_expr_end[1] = c_save;
- }
- } /* for(each operand) */
+ frag_wane (fragP);
- input_line_pointer = save_input_line_pointer;
+ /* Return the growth in the fixed part of the frag. */
+ return fragP->fr_fix - old_fr_fix;
+ }
- if (need_pass_2 || goofed)
- {
- return;
+ /* Relaxable cases. Set up the initial guess for the variable
+ part of the frag. */
+ switch (RELAX_STATE (fragP->fr_subtype))
+ {
+ case STATE_PC_RELATIVE:
+ fragP->fr_subtype = ENCODE_RELAX (STATE_PC_RELATIVE, STATE_BYTE);
+ break;
+ case STATE_CONDITIONAL_BRANCH:
+ fragP->fr_subtype = ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_BYTE);
+ break;
+ case STATE_COMPLEX_BRANCH:
+ fragP->fr_subtype = ENCODE_RELAX (STATE_COMPLEX_BRANCH, STATE_WORD);
+ break;
+ case STATE_COMPLEX_HOP:
+ fragP->fr_subtype = ENCODE_RELAX (STATE_COMPLEX_HOP, STATE_BYTE);
+ break;
+ case STATE_ALWAYS_BRANCH:
+ fragP->fr_subtype = ENCODE_RELAX (STATE_ALWAYS_BRANCH, STATE_BYTE);
+ break;
+ }
}
+ if (fragP->fr_subtype >= sizeof (md_relax_table) / sizeof (md_relax_table[0]))
+ abort ();
- /* Emit op-code. */
- /* Remember where it is, in case we want to modify the op-code later. */
- opcode_low_byteP = frag_more (v.vit_opcode_nbytes);
- memcpy (opcode_low_byteP, v.vit_opcode, v.vit_opcode_nbytes);
- opcode_as_number = md_chars_to_number (opcode_as_chars = v.vit_opcode, 4);
- for (operandP = v.vit_operand,
- expP = exp_of_operand,
- floatP = float_operand,
- end_operandP = v.vit_operand + v.vit_operands;
+ /* Return the size of the variable part of the frag. */
+ return md_relax_table[fragP->fr_subtype].rlx_length;
+}
+\f
+/* Called after relax() is finished.
+ In: Address of frag.
+ fr_type == rs_machine_dependent.
+ fr_subtype is what the address relaxed to.
- operandP < end_operandP;
-
- operandP++,
- floatP++,
- expP++)
- { /* for each operand */
- if (operandP->vop_ndx >= 0)
- {
- /* indexed addressing byte */
- /* Legality of indexed mode already checked: it is OK */
- FRAG_APPEND_1_CHAR (0x40 + operandP->vop_ndx);
- } /* if(vop_ndx>=0) */
-
- /* Here to make main operand frag(s). */
- this_add_number = expP->X_add_number;
- this_add_symbol = expP->X_add_symbol;
- this_subtract_symbol = expP->X_subtract_symbol;
- to_seg = expP->X_seg;
- is_undefined = (to_seg == SEG_UNKNOWN);
- know (to_seg == SEG_UNKNOWN
- || to_seg == SEG_ABSOLUTE
- || to_seg == SEG_DATA
- || to_seg == SEG_TEXT
- || to_seg == SEG_BSS
- || to_seg == SEG_BIG);
- at = operandP->vop_mode & 1;
- length = (operandP->vop_short == 'b'
- ? 1 : (operandP->vop_short == 'w'
- ? 2 : (operandP->vop_short == 'l'
- ? 4 : 0)));
- nbytes = operandP->vop_nbytes;
- if (operandP->vop_access == 'b')
- {
- if (to_seg == now_seg || is_undefined)
- {
- /* If is_undefined, then it might BECOME now_seg. */
- if (nbytes)
- {
- p = frag_more (nbytes);
- fix_new (frag_now, p - frag_now->fr_literal, nbytes,
- this_add_symbol, 0, this_add_number, 1, NO_RELOC);
- }
- else
- { /* to_seg==now_seg || to_seg == SEG_UNKNOWN */
- /* nbytes==0 */
- length_code = is_undefined ? STATE_UNDF : STATE_BYTE;
- if (opcode_as_number & VIT_OPCODE_SPECIAL)
- {
- if (operandP->vop_width == VAX_WIDTH_UNCONDITIONAL_JUMP)
- {
- /* br or jsb */
- frag_var (rs_machine_dependent, 5, 1,
- ENCODE_RELAX (STATE_ALWAYS_BRANCH, length_code),
- this_add_symbol, this_add_number,
- opcode_low_byteP);
- }
- else
- {
- if (operandP->vop_width == VAX_WIDTH_WORD_JUMP)
- {
- length_code = STATE_WORD;
- /* JF: There is no state_byte for this one! */
- frag_var (rs_machine_dependent, 10, 2,
- ENCODE_RELAX (STATE_COMPLEX_BRANCH, length_code),
- this_add_symbol, this_add_number,
- opcode_low_byteP);
- }
- else
- {
- know (operandP->vop_width == VAX_WIDTH_BYTE_JUMP);
- frag_var (rs_machine_dependent, 9, 1,
- ENCODE_RELAX (STATE_COMPLEX_HOP, length_code),
- this_add_symbol, this_add_number,
- opcode_low_byteP);
- }
- }
- }
- else
- {
- know (operandP->vop_width == VAX_WIDTH_CONDITIONAL_JUMP);
- frag_var (rs_machine_dependent, 7, 1,
- ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, length_code),
- this_add_symbol, this_add_number,
- opcode_low_byteP);
- }
- }
- }
- else
- { /* to_seg != now_seg && to_seg != SEG_UNKNOWN */
- /*
- * --- SEG FLOAT MAY APPEAR HERE ----
- */
- if (to_seg == SEG_ABSOLUTE)
- {
- if (nbytes)
- {
- know (!(opcode_as_number & VIT_OPCODE_SYNTHETIC));
- p = frag_more (nbytes);
- /* Conventional relocation. */
- fix_new (frag_now, p - frag_now->fr_literal,
- nbytes, &abs_symbol, 0, this_add_number, 1, NO_RELOC);
- }
- else
- {
- know (opcode_as_number & VIT_OPCODE_SYNTHETIC);
- if (opcode_as_number & VIT_OPCODE_SPECIAL)
- {
- if (operandP->vop_width == VAX_WIDTH_UNCONDITIONAL_JUMP)
- {
- /* br or jsb */
- *opcode_low_byteP = opcode_as_chars[0] + VAX_WIDEN_LONG;
- know (opcode_as_chars[1] == 0);
- p = frag_more (5);
- p[0] = VAX_ABSOLUTE_MODE; /* @#... */
- md_number_to_chars (p + 1, this_add_number, 4);
- /* Now (eg) JMP @#foo or JSB @#foo. */
- }
- else
- {
- if (operandP->vop_width == VAX_WIDTH_WORD_JUMP)
- {
- p = frag_more (10);
- p[0] = 2;
- p[1] = 0;
- p[2] = VAX_BRB;
- p[3] = 6;
- p[4] = VAX_JMP;
- p[5] = VAX_ABSOLUTE_MODE; /* @#... */
- md_number_to_chars (p + 6, this_add_number, 4);
- /*
- * Now (eg) ACBx 1f
- * BRB 2f
- * 1: JMP @#foo
- * 2:
- */
- }
- else
- {
- know (operandP->vop_width == VAX_WIDTH_BYTE_JUMP);
- p = frag_more (9);
- p[0] = 2;
- p[1] = VAX_BRB;
- p[2] = 6;
- p[3] = VAX_JMP;
- p[4] = VAX_PC_RELATIVE_MODE + 1; /* @#... */
- md_number_to_chars (p + 5, this_add_number, 4);
- /*
- * Now (eg) xOBxxx 1f
- * BRB 2f
- * 1: JMP @#foo
- * 2:
- */
- }
- }
- }
- else
- {
- /* b<cond> */
- *opcode_low_byteP ^= 1;
- /* To reverse the condition in a VAX branch, complement the lowest order
- bit. */
- p = frag_more (7);
- p[0] = 6;
- p[1] = VAX_JMP;
- p[2] = VAX_ABSOLUTE_MODE; /* @#... */
- md_number_to_chars (p + 3, this_add_number, 4);
- /*
- * Now (eg) BLEQ 1f
- * JMP @#foo
- * 1:
- */
- }
- }
- }
- else
- { /* to_seg != now_seg && to_seg != SEG_UNKNOWN && to_Seg != SEG_ABSOLUTE */
- if (nbytes > 0)
- {
- /* Pc-relative. Conventional relocation. */
- know (!(opcode_as_number & VIT_OPCODE_SYNTHETIC));
- p = frag_more (nbytes);
- fix_new (frag_now, p - frag_now->fr_literal,
- nbytes, &abs_symbol, 0, this_add_number, 1, NO_RELOC);
- }
- else
- {
- know (opcode_as_number & VIT_OPCODE_SYNTHETIC);
- if (opcode_as_number & VIT_OPCODE_SPECIAL)
- {
- if (operandP->vop_width == VAX_WIDTH_UNCONDITIONAL_JUMP)
- {
- /* br or jsb */
- know (opcode_as_chars[1] == 0);
- *opcode_low_byteP = opcode_as_chars[0] + VAX_WIDEN_LONG;
- p = frag_more (5);
- p[0] = VAX_PC_RELATIVE_MODE;
- fix_new (frag_now,
- p + 1 - frag_now->fr_literal, 4,
- this_add_symbol, 0,
- this_add_number, 1, NO_RELOC);
- /* Now eg JMP foo or JSB foo. */
- }
- else
- {
- if (operandP->vop_width == VAX_WIDTH_WORD_JUMP)
- {
- p = frag_more (10);
- p[0] = 0;
- p[1] = 2;
- p[2] = VAX_BRB;
- p[3] = 6;
- p[4] = VAX_JMP;
- p[5] = VAX_PC_RELATIVE_MODE;
- fix_new (frag_now,
- p + 6 - frag_now->fr_literal, 4,
- this_add_symbol, 0,
- this_add_number, 1, NO_RELOC);
- /*
- * Now (eg) ACBx 1f
- * BRB 2f
- * 1: JMP foo
- * 2:
- */
- }
- else
- {
- know (operandP->vop_width == VAX_WIDTH_BYTE_JUMP);
- p = frag_more (10);
- p[0] = 2;
- p[1] = VAX_BRB;
- p[2] = 6;
- p[3] = VAX_JMP;
- p[4] = VAX_PC_RELATIVE_MODE;
- fix_new (frag_now,
- p + 5 - frag_now->fr_literal,
- 4, this_add_symbol, 0,
- this_add_number, 1, NO_RELOC);
- /*
- * Now (eg) xOBxxx 1f
- * BRB 2f
- * 1: JMP foo
- * 2:
- */
- }
- }
- }
- else
- {
- know (operandP->vop_width == VAX_WIDTH_CONDITIONAL_JUMP);
- *opcode_low_byteP ^= 1; /* Reverse branch condition. */
- p = frag_more (7);
- p[0] = 6;
- p[1] = VAX_JMP;
- p[2] = VAX_PC_RELATIVE_MODE;
- fix_new (frag_now, p + 3 - frag_now->fr_literal,
- 4, this_add_symbol, 0,
- this_add_number, 1, NO_RELOC);
- }
- }
- }
- }
- }
- else
- {
- know (operandP->vop_access != 'b'); /* So it is ordinary operand. */
- know (operandP->vop_access != ' '); /* ' ' target-independent: elsewhere. */
- know (operandP->vop_access == 'a'
- || operandP->vop_access == 'm'
- || operandP->vop_access == 'r'
- || operandP->vop_access == 'v'
- || operandP->vop_access == 'w');
- if (operandP->vop_short == 's')
- {
- if (to_seg == SEG_ABSOLUTE)
- {
- if (this_add_number < 0 || this_add_number >= 64)
- {
- as_warn ("Short literal overflow(%d.), immediate mode assumed.", this_add_number);
- operandP->vop_short = 'i';
- operandP->vop_mode = 8;
- operandP->vop_reg = 0xF;
- }
- }
- else
- {
- as_warn ("Forced short literal to immediate mode. now_seg=%s to_seg=%s",
- segment_name (now_seg), segment_name (to_seg));
- operandP->vop_short = 'i';
- operandP->vop_mode = 8;
- operandP->vop_reg = 0xF;
- }
- }
- if (operandP->vop_reg >= 0 && (operandP->vop_mode < 8
- || (operandP->vop_reg != 0xF && operandP->vop_mode < 10)))
- {
- /* One byte operand. */
- know (operandP->vop_mode > 3);
- FRAG_APPEND_1_CHAR (operandP->vop_mode << 4 | operandP->vop_reg);
- /* All 1-bytes except S^# happen here. */
- }
- else
- { /* {@}{q^}foo{(Rn)} or S^#foo */
- if (operandP->vop_reg == -1 && operandP->vop_short != 's')
- {
- /* "{@}{q^}foo" */
- if (to_seg == now_seg)
- {
- if (length == 0)
- {
- know (operandP->vop_short == ' ');
- p = frag_var (rs_machine_dependent, 10, 2,
- ENCODE_RELAX (STATE_PC_RELATIVE, STATE_BYTE),
- this_add_symbol, this_add_number,
- opcode_low_byteP);
- know (operandP->vop_mode == 10 + at);
- *p = at << 4;
- /* At is the only context we need to carry to */
- /* other side of relax() process. */
- /* Must be in the correct bit position of VAX */
- /* operand spec. byte. */
- }
- else
- {
- know (length);
- know (operandP->vop_short != ' ');
- p = frag_more (length + 1);
- /* JF is this array stuff really going to work? */
- p[0] = 0xF | ((at + "?\12\14?\16"[length]) << 4);
- fix_new (frag_now, p + 1 - frag_now->fr_literal,
- length, this_add_symbol, 0,
- this_add_number, 1, NO_RELOC);
- }
- }
- else
- { /* to_seg != now_seg */
- if (this_add_symbol == NULL)
- {
- know (to_seg == SEG_ABSOLUTE);
- /* Do @#foo: simpler relocation than foo-.(pc) anyway. */
- p = frag_more (5);
- p[0] = VAX_ABSOLUTE_MODE; /* @#... */
- md_number_to_chars (p + 1, this_add_number, 4);
- if (length && length != 4)
- {
- as_warn ("Length specification ignored. Address mode 9F used");
- }
- }
- else
- {
- /* {@}{q^}other_seg */
- know ((length == 0 && operandP->vop_short == ' ')
- || (length > 0 && operandP->vop_short != ' '));
- if (is_undefined)
- {
- /*
- * We have a SEG_UNKNOWN symbol. It might
- * turn out to be in the same segment as
- * the instruction, permitting relaxation.
- */
- p = frag_var (rs_machine_dependent, 5, 2,
- ENCODE_RELAX (STATE_PC_RELATIVE, STATE_UNDF),
- this_add_symbol, this_add_number,
- 0);
- p[0] = at << 4;
- }
- else
- {
- if (length == 0)
- {
- know (operandP->vop_short == ' ');
- length = 4; /* Longest possible. */
- }
- p = frag_more (length + 1);
- p[0] = 0xF | ((at + "?\12\14?\16"[length]) << 4);
- md_number_to_chars (p + 1, this_add_number, length);
- fix_new (frag_now,
- p + 1 - frag_now->fr_literal,
- length, this_add_symbol, 0,
- this_add_number, 1, NO_RELOC);
- }
- }
- }
- }
- else
- { /* {@}{q^}foo(Rn) or S^# or I^# or # */
- if (operandP->vop_mode < 0xA)
- { /* # or S^# or I^# */
- /* know( (length == 0 && operandP->vop_short == ' ')
- || (length > 0 && operandP->vop_short != ' ')); */
- if (length == 0
- && to_seg == SEG_ABSOLUTE
- && operandP->vop_mode == 8 /* No '@'. */
- && this_add_number < 64
- && this_add_number >= 0)
- {
- operandP->vop_short = 's';
- }
- if (operandP->vop_short == 's')
- {
- FRAG_APPEND_1_CHAR (this_add_number);
- }
- else
- { /* I^#... */
- know (nbytes);
- p = frag_more (nbytes + 1);
- know (operandP->vop_reg == 0xF);
- p[0] = (operandP->vop_mode << 4) | 0xF;
- if (to_seg == SEG_ABSOLUTE)
- {
- /*
- * If nbytes > 4, then we are scrod. We don't know if the
- * high order bytes are to be 0xFF or 0x00.
- * BSD4.2 & RMS say use 0x00. OK --- but this
- * assembler needs ANOTHER rewrite to
- * cope properly with this bug.
- */
- md_number_to_chars (p + 1, this_add_number, min (4, nbytes));
- if (nbytes > 4)
- {
- memset (p + 5, '\0', nbytes - 4);
- }
- }
- else
- {
- if (to_seg == SEG_BIG)
- {
- /*
- * Problem here is to get the bytes in the right order.
- * We stored our constant as LITTLENUMs, not bytes.
- */
- LITTLENUM_TYPE *lP;
-
- lP = floatP->low;
- if (nbytes & 1)
- {
- know (nbytes == 1);
- p[1] = *lP;
- }
- else
- {
- for (p++; nbytes; nbytes -= 2, p += 2, lP++)
- {
- md_number_to_chars (p, *lP, 2);
- }
- }
- }
- else
- {
- fix_new (frag_now, p + 1 - frag_now->fr_literal,
- nbytes, this_add_symbol, 0,
- this_add_number, 0, NO_RELOC);
- }
- }
- }
- }
- else
- { /* {@}{q^}foo(Rn) */
- know ((length == 0 && operandP->vop_short == ' ')
- || (length > 0 && operandP->vop_short != ' '));
- if (length == 0)
- {
- if (to_seg == SEG_ABSOLUTE)
- {
- register long test;
-
- test = this_add_number;
-
- if (test < 0)
- test = ~test;
-
- length = test & 0xffff8000 ? 4
- : test & 0xffffff80 ? 2
- : 1;
- }
- else
- {
- length = 4;
- }
- }
- p = frag_more (1 + length);
- know (operandP->vop_reg >= 0);
- p[0] = operandP->vop_reg
- | ((at | "?\12\14?\16"[length]) << 4);
- if (to_seg == SEG_ABSOLUTE)
- {
- md_number_to_chars (p + 1, this_add_number, length);
- }
- else
- {
- fix_new (frag_now, p + 1 - frag_now->fr_literal,
- length, this_add_symbol, 0,
- this_add_number, 0, NO_RELOC);
- }
- }
- }
- } /* if(single-byte-operand) */
- }
- } /* for(operandP) */
-} /* vax_assemble() */
-\f
-/*
- * md_estimate_size_before_relax()
- *
- * Called just before relax().
- * Any symbol that is now undefined will not become defined.
- * Return the correct fr_subtype in the frag.
- * Return the initial "guess for fr_var" to caller.
- * The guess for fr_var is ACTUALLY the growth beyond fr_fix.
- * Whatever we do to grow fr_fix or fr_var contributes to our returned value.
- * Although it may not be explicit in the frag, pretend fr_var starts with a
- * 0 value.
- */
-int
-md_estimate_size_before_relax (fragP, segment)
- register fragS *fragP;
- register segT segment;
-{
- register char *p;
- register int old_fr_fix;
-
- old_fr_fix = fragP->fr_fix;
- switch (fragP->fr_subtype)
- {
- case ENCODE_RELAX (STATE_PC_RELATIVE, STATE_UNDF):
- if (S_GET_SEGMENT (fragP->fr_symbol) == segment)
- { /* A relaxable case. */
- fragP->fr_subtype = ENCODE_RELAX (STATE_PC_RELATIVE, STATE_BYTE);
- }
- else
- {
- p = fragP->fr_literal + old_fr_fix;
- p[0] |= VAX_PC_RELATIVE_MODE; /* Preserve @ bit. */
- fragP->fr_fix += 1 + 4;
- fix_new (fragP, old_fr_fix + 1, 4, fragP->fr_symbol, 0,
- fragP->fr_offset, 1, NO_RELOC);
- frag_wane (fragP);
- }
- break;
-
- case ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_UNDF):
- if (S_GET_SEGMENT (fragP->fr_symbol) == segment)
- {
- fragP->fr_subtype = ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_BYTE);
- }
- else
- {
- p = fragP->fr_literal + old_fr_fix;
- *fragP->fr_opcode ^= 1; /* Reverse sense of branch. */
- p[0] = 6;
- p[1] = VAX_JMP;
- p[2] = VAX_PC_RELATIVE_MODE; /* ...(PC) */
- fragP->fr_fix += 1 + 1 + 1 + 4;
- fix_new (fragP, old_fr_fix + 3, 4, fragP->fr_symbol, 0,
- fragP->fr_offset, 1, NO_RELOC);
- frag_wane (fragP);
- }
- break;
-
- case ENCODE_RELAX (STATE_COMPLEX_BRANCH, STATE_UNDF):
- if (S_GET_SEGMENT (fragP->fr_symbol) == segment)
- {
- fragP->fr_subtype = ENCODE_RELAX (STATE_COMPLEX_BRANCH, STATE_WORD);
- }
- else
- {
- p = fragP->fr_literal + old_fr_fix;
- p[0] = 2;
- p[1] = 0;
- p[2] = VAX_BRB;
- p[3] = 6;
- p[4] = VAX_JMP;
- p[5] = VAX_PC_RELATIVE_MODE; /* ...(pc) */
- fragP->fr_fix += 2 + 2 + 1 + 1 + 4;
- fix_new (fragP, old_fr_fix + 6, 4, fragP->fr_symbol, 0,
- fragP->fr_offset, 1, NO_RELOC);
- frag_wane (fragP);
- }
- break;
-
- case ENCODE_RELAX (STATE_COMPLEX_HOP, STATE_UNDF):
- if (S_GET_SEGMENT (fragP->fr_symbol) == segment)
- {
- fragP->fr_subtype = ENCODE_RELAX (STATE_COMPLEX_HOP, STATE_BYTE);
- }
- else
- {
- p = fragP->fr_literal + old_fr_fix;
- p[0] = 2;
- p[1] = VAX_BRB;
- p[2] = 6;
- p[3] = VAX_JMP;
- p[4] = VAX_PC_RELATIVE_MODE; /* ...(pc) */
- fragP->fr_fix += 1 + 2 + 1 + 1 + 4;
- fix_new (fragP, old_fr_fix + 5, 4, fragP->fr_symbol, 0,
- fragP->fr_offset, 1, NO_RELOC);
- frag_wane (fragP);
- }
- break;
-
- case ENCODE_RELAX (STATE_ALWAYS_BRANCH, STATE_UNDF):
- if (S_GET_SEGMENT (fragP->fr_symbol) == segment)
- {
- fragP->fr_subtype = ENCODE_RELAX (STATE_ALWAYS_BRANCH, STATE_BYTE);
- }
- else
- {
- p = fragP->fr_literal + old_fr_fix;
- *fragP->fr_opcode += VAX_WIDEN_LONG;
- p[0] = VAX_PC_RELATIVE_MODE; /* ...(PC) */
- fragP->fr_fix += 1 + 4;
- fix_new (fragP, old_fr_fix + 1, 4, fragP->fr_symbol, 0,
- fragP->fr_offset, 1, NO_RELOC);
- frag_wane (fragP);
- }
- break;
-
- default:
- break;
- }
- return (fragP->fr_var + fragP->fr_fix - old_fr_fix);
-} /* md_estimate_size_before_relax() */
-\f
-/*
- * md_convert_frag();
- *
- * Called after relax() is finished.
- * In: Address of frag.
- * fr_type == rs_machine_dependent.
- * fr_subtype is what the address relaxed to.
- *
- * Out: Any fixSs and constants are set up.
- * Caller will turn frag into a ".space 0".
- */
+ Out: Any fixSs and constants are set up.
+ Caller will turn frag into a ".space 0". */
void
-md_convert_frag (headers, fragP)
- object_headers *headers;
- register fragS *fragP;
+md_convert_frag (bfd *headers ATTRIBUTE_UNUSED,
+ segT seg ATTRIBUTE_UNUSED,
+ fragS *fragP)
{
- char *addressP; /* -> _var to change. */
- char *opcodeP; /* -> opcode char(s) to change. */
- short int length_code; /* 2=long 1=word 0=byte */
- short int extension = 0; /* Size of relaxed address. */
- /* Added to fr_fix: incl. ALL var chars. */
+ char *addressP; /* -> _var to change. */
+ char *opcodeP; /* -> opcode char(s) to change. */
+ short int extension = 0; /* Size of relaxed address. */
+ /* Added to fr_fix: incl. ALL var chars. */
symbolS *symbolP;
long where;
- long address_of_var;
- /* Where, in file space, is _var of *fragP? */
- long target_address = 0;
- /* Where, in file space, does addr point? */
know (fragP->fr_type == rs_machine_dependent);
- length_code = fragP->fr_subtype & 3; /* depends on ENCODE_RELAX() */
- know (length_code >= 0 && length_code < 3);
where = fragP->fr_fix;
addressP = fragP->fr_literal + where;
opcodeP = fragP->fr_opcode;
symbolP = fragP->fr_symbol;
know (symbolP);
- target_address = S_GET_VALUE (symbolP) + fragP->fr_offset;
- address_of_var = fragP->fr_address + where;
switch (fragP->fr_subtype)
{
-
case ENCODE_RELAX (STATE_PC_RELATIVE, STATE_BYTE):
- know (*addressP == 0 || *addressP == 0x10); /* '@' bit. */
+ know (*addressP == 0 || *addressP == 0x10); /* '@' bit. */
addressP[0] |= 0xAF; /* Byte displacement. */
- addressP[1] = target_address - (address_of_var + 2);
+ fix_new (fragP, fragP->fr_fix + 1, 1, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 2;
break;
case ENCODE_RELAX (STATE_PC_RELATIVE, STATE_WORD):
- know (*addressP == 0 || *addressP == 0x10); /* '@' bit. */
+ know (*addressP == 0 || *addressP == 0x10); /* '@' bit. */
addressP[0] |= 0xCF; /* Word displacement. */
- md_number_to_chars (addressP + 1, target_address - (address_of_var + 3), 2);
+ fix_new (fragP, fragP->fr_fix + 1, 2, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 3;
break;
case ENCODE_RELAX (STATE_PC_RELATIVE, STATE_LONG):
- know (*addressP == 0 || *addressP == 0x10); /* '@' bit. */
+ know (*addressP == 0 || *addressP == 0x10); /* '@' bit. */
addressP[0] |= 0xEF; /* Long word displacement. */
- md_number_to_chars (addressP + 1, target_address - (address_of_var + 5), 4);
+ fix_new (fragP, fragP->fr_fix + 1, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 5;
break;
case ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_BYTE):
- addressP[0] = target_address - (address_of_var + 1);
+ fix_new (fragP, fragP->fr_fix, 1, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 1;
break;
case ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_WORD):
- opcodeP[0] ^= 1; /* Reverse sense of test. */
+ opcodeP[0] ^= 1; /* Reverse sense of test. */
addressP[0] = 3;
- addressP[1] = VAX_BRB + VAX_WIDEN_WORD;
- md_number_to_chars (addressP + 2, target_address - (address_of_var + 4), 2);
+ addressP[1] = VAX_BRW;
+ fix_new (fragP, fragP->fr_fix + 2, 2, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 4;
break;
case ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_LONG):
- opcodeP[0] ^= 1; /* Reverse sense of test. */
+ opcodeP[0] ^= 1; /* Reverse sense of test. */
addressP[0] = 6;
addressP[1] = VAX_JMP;
addressP[2] = VAX_PC_RELATIVE_MODE;
- md_number_to_chars (addressP + 3, target_address, 4);
+ fix_new (fragP, fragP->fr_fix + 3, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 7;
break;
case ENCODE_RELAX (STATE_ALWAYS_BRANCH, STATE_BYTE):
- addressP[0] = target_address - (address_of_var + 1);
+ fix_new (fragP, fragP->fr_fix, 1, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 1;
break;
case ENCODE_RELAX (STATE_ALWAYS_BRANCH, STATE_WORD):
opcodeP[0] += VAX_WIDEN_WORD; /* brb -> brw, bsbb -> bsbw */
- md_number_to_chars (addressP, target_address - (address_of_var + 2), 2);
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset,
+ 1, NO_RELOC);
extension = 2;
break;
case ENCODE_RELAX (STATE_ALWAYS_BRANCH, STATE_LONG):
opcodeP[0] += VAX_WIDEN_LONG; /* brb -> jmp, bsbb -> jsb */
addressP[0] = VAX_PC_RELATIVE_MODE;
- md_number_to_chars (addressP + 1, target_address - (address_of_var + 5), 4);
+ fix_new (fragP, fragP->fr_fix + 1, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 5;
break;
case ENCODE_RELAX (STATE_COMPLEX_BRANCH, STATE_WORD):
- md_number_to_chars (addressP, target_address - (address_of_var + 2), 2);
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 2;
break;
addressP[3] = 6;
addressP[4] = VAX_JMP;
addressP[5] = VAX_PC_RELATIVE_MODE;
- md_number_to_chars (addressP + 6, target_address, 4);
+ fix_new (fragP, fragP->fr_fix + 6, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 10;
break;
case ENCODE_RELAX (STATE_COMPLEX_HOP, STATE_BYTE):
- addressP[0] = target_address - (address_of_var + 1);
+ fix_new (fragP, fragP->fr_fix, 1, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 1;
break;
addressP[1] = VAX_BRB;
addressP[2] = 3;
addressP[3] = VAX_BRW;
- md_number_to_chars (addressP + 4, target_address - (address_of_var + 6), 2);
+ fix_new (fragP, fragP->fr_fix + 4, 2, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 6;
break;
addressP[2] = 6;
addressP[3] = VAX_JMP;
addressP[4] = VAX_PC_RELATIVE_MODE;
- md_number_to_chars (addressP + 5, target_address, 4);
+ fix_new (fragP, fragP->fr_fix + 5, 4, fragP->fr_symbol,
+ fragP->fr_offset, 1, NO_RELOC);
extension = 9;
break;
break;
}
fragP->fr_fix += extension;
-} /* md_convert_frag() */
+}
/* Translate internal format of relocation info into target format.
On vax: first 4 bytes are normal unsigned long, next three bytes
are symbolnum, least sig. byte first. Last byte is broken up with
the upper nibble as nuthin, bit 3 as extern, bits 2 & 1 as length, and
- bit 0 as pcrel. */
+ bit 0 as pcrel. */
#ifdef comment
void
-md_ri_to_chars (the_bytes, ri)
- char *the_bytes;
- struct reloc_info_generic ri;
+md_ri_to_chars (char *the_bytes, struct reloc_info_generic ri)
{
- /* this is easy */
+ /* This is easy. */
md_number_to_chars (the_bytes, ri.r_address, sizeof (ri.r_address));
- /* now the fun stuff */
+ /* Now the fun stuff. */
the_bytes[6] = (ri.r_symbolnum >> 16) & 0x0ff;
the_bytes[5] = (ri.r_symbolnum >> 8) & 0x0ff;
the_bytes[4] = ri.r_symbolnum & 0x0ff;
- the_bytes[7] = (((ri.r_extern << 3) & 0x08) | ((ri.r_length << 1) & 0x06) |
- ((ri.r_pcrel << 0) & 0x01)) & 0x0F;
+ the_bytes[7] = (((ri.r_extern << 3) & 0x08) | ((ri.r_length << 1) & 0x06)
+ | ((ri.r_pcrel << 0) & 0x01)) & 0x0F;
}
#endif /* comment */
-void
-tc_aout_fix_to_chars (where, fixP, segment_address_in_file)
- char *where;
- fixS *fixP;
- relax_addressT segment_address_in_file;
-{
- /*
- * In: length of relocation (or of address) in chars: 1, 2 or 4.
- * Out: GNU LD relocation length code: 0, 1, or 2.
- */
-
- static unsigned char nbytes_r_length[] =
- {42, 0, 1, 42, 2};
- long r_symbolnum;
-
- know (fixP->fx_addsy != NULL);
-
- md_number_to_chars (where,
- fixP->fx_frag->fr_address + fixP->fx_where - segment_address_in_file,
- 4);
-
- r_symbolnum = (S_IS_DEFINED (fixP->fx_addsy)
- ? S_GET_TYPE (fixP->fx_addsy)
- : fixP->fx_addsy->sy_number);
-
- where[6] = (r_symbolnum >> 16) & 0x0ff;
- where[5] = (r_symbolnum >> 8) & 0x0ff;
- where[4] = r_symbolnum & 0x0ff;
- where[7] = ((((!S_IS_DEFINED (fixP->fx_addsy)) << 3) & 0x08)
- | ((nbytes_r_length[fixP->fx_size] << 1) & 0x06)
- | (((fixP->fx_pcrel << 0) & 0x01) & 0x0f));
-
- return;
-} /* tc_aout_fix_to_chars() */
-
-/*
- * BUGS, GRIPES, APOLOGIA, etc.
- *
- * The opcode table 'votstrs' needs to be sorted on opcode frequency.
- * That is, AFTER we hash it with hash_...(), we want most-used opcodes
- * to come out of the hash table faster.
- *
- * I am sorry to inflict
- * yet another VAX assembler on the world, but RMS says we must
- * do everything from scratch, to prevent pin-heads restricting
- * this software.
- */
-
-/*
- * This is a vaguely modular set of routines in C to parse VAX
- * assembly code using DEC mnemonics. It is NOT un*x specific.
- *
- * The idea here is that the assembler has taken care of all:
- * labels
- * macros
- * listing
- * pseudo-ops
- * line continuation
- * comments
- * condensing any whitespace down to exactly one space
- * and all we have to do is parse 1 line into a vax instruction
- * partially formed. We will accept a line, and deliver:
- * an error message (hopefully empty)
- * a skeleton VAX instruction (tree structure)
- * textual pointers to all the operand expressions
- * a warning message that notes a silly operand (hopefully empty)
- */
-\f
-/*
- * E D I T H I S T O R Y
- *
- * 17may86 Dean Elsner. Bug if line ends immediately after opcode.
- * 30apr86 Dean Elsner. New vip_op() uses arg block so change call.
- * 6jan86 Dean Elsner. Crock vip_begin() to call vip_op_defaults().
- * 2jan86 Dean Elsner. Invent synthetic opcodes.
- * Widen vax_opcodeT to 32 bits. Use a bit for VIT_OPCODE_SYNTHETIC,
- * which means this is not a real opcode, it is like a macro; it will
- * be relax()ed into 1 or more instructions.
- * Use another bit for VIT_OPCODE_SPECIAL if the op-code is not optimised
- * like a regular branch instruction. Option added to vip_begin():
- * exclude synthetic opcodes. Invent synthetic_votstrs[].
- * 31dec85 Dean Elsner. Invent vit_opcode_nbytes.
- * Also make vit_opcode into a char[]. We now have n-byte vax opcodes,
- * so caller's don't have to know the difference between a 1-byte & a
- * 2-byte op-code. Still need vax_opcodeT concept, so we know how
- * big an object must be to hold an op.code.
- * 30dec85 Dean Elsner. Widen typedef vax_opcodeT in "vax-inst.h"
- * because vax opcodes may be 16 bits. Our crufty C compiler was
- * happily initialising 8-bit vot_codes with 16-bit numbers!
- * (Wouldn't the 'phone company like to compress data so easily!)
- * 29dec85 Dean Elsner. New static table vax_operand_width_size[].
- * Invented so we know hw many bytes a "I^#42" needs in its immediate
- * operand. Revised struct vop in "vax-inst.h": explicitly include
- * byte length of each operand, and it's letter-code datum type.
- * 17nov85 Dean Elsner. Name Change.
- * Due to ar(1) truncating names, we learned the hard way that
- * "vax-inst-parse.c" -> "vax-inst-parse." dropping the "o" off
- * the archived object name. SO... we shortened the name of this
- * source file, and changed the makefile.
- */
-
-static struct hash_control *op_hash = NULL; /* handle of the OPCODE hash table */
-/* NULL means any use before vip_begin() */
-/* will crash */
-
-/*
- * In: 1 character, from "bdfghloqpw" being the data-type of an operand
- * of a vax instruction.
- *
- * Out: the length of an operand of that type, in bytes.
- * Special branch operands types "-?!" have length 0.
- */
+/* BUGS, GRIPES, APOLOGIA, etc.
+
+ The opcode table 'votstrs' needs to be sorted on opcode frequency.
+ That is, AFTER we hash it with hash_...(), we want most-used opcodes
+ to come out of the hash table faster.
+
+ I am sorry to inflict yet another VAX assembler on the world, but
+ RMS says we must do everything from scratch, to prevent pin-heads
+ restricting this software.
+
+ This is a vaguely modular set of routines in C to parse VAX
+ assembly code using DEC mnemonics. It is NOT un*x specific.
+
+ The idea here is that the assembler has taken care of all:
+ labels
+ macros
+ listing
+ pseudo-ops
+ line continuation
+ comments
+ condensing any whitespace down to exactly one space
+ and all we have to do is parse 1 line into a vax instruction
+ partially formed. We will accept a line, and deliver:
+ an error message (hopefully empty)
+ a skeleton VAX instruction (tree structure)
+ textual pointers to all the operand expressions
+ a warning message that notes a silly operand (hopefully empty)
+
+ E D I T H I S T O R Y
+
+ 17may86 Dean Elsner. Bug if line ends immediately after opcode.
+ 30apr86 Dean Elsner. New vip_op() uses arg block so change call.
+ 6jan86 Dean Elsner. Crock vip_begin() to call vip_op_defaults().
+ 2jan86 Dean Elsner. Invent synthetic opcodes.
+ Widen vax_opcodeT to 32 bits. Use a bit for VIT_OPCODE_SYNTHETIC,
+ which means this is not a real opcode, it is like a macro; it will
+ be relax()ed into 1 or more instructions.
+ Use another bit for VIT_OPCODE_SPECIAL if the op-code is not optimised
+ like a regular branch instruction. Option added to vip_begin():
+ exclude synthetic opcodes. Invent synthetic_votstrs[].
+ 31dec85 Dean Elsner. Invent vit_opcode_nbytes.
+ Also make vit_opcode into a char[]. We now have n-byte vax opcodes,
+ so caller's don't have to know the difference between a 1-byte & a
+ 2-byte op-code. Still need vax_opcodeT concept, so we know how
+ big an object must be to hold an op.code.
+ 30dec85 Dean Elsner. Widen typedef vax_opcodeT in "vax-inst.h"
+ because vax opcodes may be 16 bits. Our crufty C compiler was
+ happily initialising 8-bit vot_codes with 16-bit numbers!
+ (Wouldn't the 'phone company like to compress data so easily!)
+ 29dec85 Dean Elsner. New static table vax_operand_width_size[].
+ Invented so we know hw many bytes a "I^#42" needs in its immediate
+ operand. Revised struct vop in "vax-inst.h": explicitly include
+ byte length of each operand, and it's letter-code datum type.
+ 17nov85 Dean Elsner. Name Change.
+ Due to ar(1) truncating names, we learned the hard way that
+ "vax-inst-parse.c" -> "vax-inst-parse." dropping the "o" off
+ the archived object name. SO... we shortened the name of this
+ source file, and changed the makefile. */
+
+/* Handle of the OPCODE hash table. */
+static struct hash_control *op_hash;
+
+/* In: 1 character, from "bdfghloqpw" being the data-type of an operand
+ of a vax instruction.
+
+ Out: the length of an operand of that type, in bytes.
+ Special branch operands types "-?!" have length 0. */
static const short int vax_operand_width_size[256] =
{
-
-#define _ 0
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _,
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _,
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _,
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _,
- _, _, 1, _, 8, _, 4, 8, 16, _, _, _, 4, _, _, 16, /* ..b.d.fgh...l..o */
- _, 8, _, _, _, _, _, 2, _, _, _, _, _, _, _, _, /* .q.....w........ */
- _, _, 1, _, 8, _, 4, 8, 16, _, _, _, 4, _, _, 16, /* ..b.d.fgh...l..o */
- _, 8, _, _, _, _, _, 2, _, _, _, _, _, _, _, _, /* .q.....w........ */
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _,
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _,
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _,
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _,
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _,
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _,
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _,
- _, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _};
-#undef _
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 1, 0, 8, 0, 4, 8, 16, 0, 0, 0, 4, 0, 0,16, /* ..b.d.fgh...l..o */
+ 0, 8, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, /* .q.....w........ */
+ 0, 0, 1, 0, 8, 0, 4, 8, 16, 0, 0, 0, 4, 0, 0,16, /* ..b.d.fgh...l..o */
+ 0, 8, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, /* .q.....w........ */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+};
\f
-/*
- * This perversion encodes all the vax opcodes as a bunch of strings.
- * RMS says we should build our hash-table at run-time. Hmm.
- * Please would someone arrange these in decreasing frequency of opcode?
- * Because of the way hash_...() works, the most frequently used opcode
- * should be textually first and so on.
- *
- * Input for this table was 'vax.opcodes', awk(1)ed by 'vax.opcodes.c.awk' .
- * So change 'vax.opcodes', then re-generate this table.
- */
+/* This perversion encodes all the vax opcodes as a bunch of strings.
+ RMS says we should build our hash-table at run-time. Hmm.
+ Please would someone arrange these in decreasing frequency of opcode?
+ Because of the way hash_...() works, the most frequently used opcode
+ should be textually first and so on.
+
+ Input for this table was 'vax.opcodes', awk(1)ed by 'vax.opcodes.c.awk' .
+ So change 'vax.opcodes', then re-generate this table. */
#include "opcode/vax.h"
\f
-/*
- * This is a table of optional op-codes. All of them represent
- * 'synthetic' instructions that seem popular.
- *
- * Here we make some pseudo op-codes. Every code has a bit set to say
- * it is synthetic. This lets you catch them if you want to
- * ban these opcodes. They are mnemonics for "elastic" instructions
- * that are supposed to assemble into the fewest bytes needed to do a
- * branch, or to do a conditional branch, or whatever.
- *
- * The opcode is in the usual place [low-order n*8 bits]. This means
- * that if you mask off the bucky bits, the usual rules apply about
- * how long the opcode is.
- *
- * All VAX branch displacements come at the end of the instruction.
- * For simple branches (1-byte opcode + 1-byte displacement) the last
- * operand is coded 'b?' where the "data type" '?' is a clue that we
- * may reverse the sense of the branch (complement lowest order bit)
- * and branch around a jump. This is by far the most common case.
- * That is why the VIT_OPCODE_SYNTHETIC bit is set: it says this is
- * a 0-byte op-code followed by 2 or more bytes of operand address.
- *
- * If the op-code has VIT_OPCODE_SPECIAL set, then we have a more unusual
- * case.
- *
- * For JBSB & JBR the treatment is the similar, except (1) we have a 'bw'
- * option before (2) we can directly JSB/JMP because there is no condition.
- * These operands have 'b-' as their access/data type.
- *
- * That leaves a bunch of random opcodes: JACBx, JxOBxxx. In these
- * cases, we do the same idea. JACBxxx are all marked with a 'b!'
- * JAOBxxx & JSOBxxx are marked with a 'b:'.
- *
- */
+/* This is a table of optional op-codes. All of them represent
+ 'synthetic' instructions that seem popular.
+
+ Here we make some pseudo op-codes. Every code has a bit set to say
+ it is synthetic. This lets you catch them if you want to
+ ban these opcodes. They are mnemonics for "elastic" instructions
+ that are supposed to assemble into the fewest bytes needed to do a
+ branch, or to do a conditional branch, or whatever.
+
+ The opcode is in the usual place [low-order n*8 bits]. This means
+ that if you mask off the bucky bits, the usual rules apply about
+ how long the opcode is.
+
+ All VAX branch displacements come at the end of the instruction.
+ For simple branches (1-byte opcode + 1-byte displacement) the last
+ operand is coded 'b?' where the "data type" '?' is a clue that we
+ may reverse the sense of the branch (complement lowest order bit)
+ and branch around a jump. This is by far the most common case.
+ That is why the VIT_OPCODE_SYNTHETIC bit is set: it says this is
+ a 0-byte op-code followed by 2 or more bytes of operand address.
+
+ If the op-code has VIT_OPCODE_SPECIAL set, then we have a more unusual
+ case.
+
+ For JBSB & JBR the treatment is the similar, except (1) we have a 'bw'
+ option before (2) we can directly JSB/JMP because there is no condition.
+ These operands have 'b-' as their access/data type.
+
+ That leaves a bunch of random opcodes: JACBx, JxOBxxx. In these
+ cases, we do the same idea. JACBxxx are all marked with a 'b!'
+ JAOBxxx & JSOBxxx are marked with a 'b:'. */
#if (VIT_OPCODE_SYNTHETIC != 0x80000000)
-You have just broken the encoding below, which assumes the sign bit
- means 'I am an imaginary instruction'.
+#error "You have just broken the encoding below, which assumes the sign bit means 'I am an imaginary instruction'."
#endif
#if (VIT_OPCODE_SPECIAL != 0x40000000)
- You have just broken the encoding below, which assumes the 0x40 M bit means
- 'I am not to be "optimised" the way normal branches are'.
+#error "You have just broken the encoding below, which assumes the 0x40 M bit means 'I am not to be "optimised" the way normal branches are'."
#endif
static const struct vot
{"jlssu", {"b?", 0x8000001f}},
{"jcs", {"b?", 0x8000001f}},
- {"jacbw", {"rwrwmwb!", 0xC000003d}},
- {"jacbf", {"rfrfmfb!", 0xC000004f}},
- {"jacbd", {"rdrdmdb!", 0xC000006f}},
- {"jacbb", {"rbrbmbb!", 0xC000009d}},
- {"jacbl", {"rlrlmlb!", 0xC00000f1}},
- {"jacbg", {"rgrgmgb!", 0xC0004ffd}},
- {"jacbh", {"rhrhmhb!", 0xC0006ffd}},
-
- {"jbs", {"rlvbb?", 0x800000e0}},
- {"jbc", {"rlvbb?", 0x800000e1}},
- {"jbss", {"rlvbb?", 0x800000e2}},
- {"jbcs", {"rlvbb?", 0x800000e3}},
- {"jbsc", {"rlvbb?", 0x800000e4}},
- {"jbcc", {"rlvbb?", 0x800000e5}},
- {"jbssi", {"rlvbb?", 0x800000e6}},
- {"jbcci", {"rlvbb?", 0x800000e7}},
- {"jlbs", {"rlb?", 0x800000e8}}, /* JF changed from rlvbb? */
- {"jlbc", {"rlb?", 0x800000e9}}, /* JF changed from rlvbb? */
-
- {"jaoblss", {"rlmlb:", 0xC00000f2}},
- {"jaobleq", {"rlmlb:", 0xC00000f3}},
- {"jsobgeq", {"mlb:", 0xC00000f4}}, /* JF was rlmlb: */
- {"jsobgtr", {"mlb:", 0xC00000f5}}, /* JF was rlmlb: */
-
-/* CASEx has no branch addresses in our conception of it. */
-/* You should use ".word ..." statements after the "case ...". */
-
- {"", ""} /* empty is end sentinel */
-
-}; /* synthetic_votstrs */
-\f
-/*
- * v i p _ b e g i n ( )
- *
- * Call me once before you decode any lines.
- * I decode votstrs into a hash table at op_hash (which I create).
- * I return an error text: hopefully "".
- * If you want, I will include the 'synthetic' jXXX instructions in the
- * instruction table.
- * You must nominate metacharacters for eg DEC's "#", "@", "^".
- */
-
-char *
-vip_begin (synthetic_too, immediate, indirect, displen)
- int synthetic_too; /* 1 means include jXXX op-codes. */
- char *immediate, *indirect, *displen;
-{
- const struct vot *vP; /* scan votstrs */
- char *retval; /* error text */
-
- if ((op_hash = hash_new ()))
- {
- retval = ""; /* OK so far */
- for (vP = votstrs; *vP->vot_name && !*retval; vP++)
- {
- retval = hash_insert (op_hash, vP->vot_name, &vP->vot_detail);
- }
- if (synthetic_too)
- {
- for (vP = synthetic_votstrs; *vP->vot_name && !*retval; vP++)
- {
- retval = hash_insert (op_hash, vP->vot_name, &vP->vot_detail);
- }
- }
- }
- else
- {
- retval = "virtual memory exceeded";
- }
-#ifndef CONST_TABLE
- vip_op_defaults (immediate, indirect, displen);
-#endif
-
- return (retval);
-}
-
-
-/*
- * v i p _ e n d ( )
- *
- * Call me once after you have decoded all lines.
- * I do any cleaning-up needed.
- *
- * We don't have to do any cleanup ourselves: all of our operand
- * symbol table is static, and free()ing it is naughty.
- */
-static void
-vip_end ()
-{
-}
-
-/*
- * v i p ( )
- *
- * This converts a string into a vax instruction.
- * The string must be a bare single instruction in dec-vax (with BSD4 frobs)
- * format.
- * It provides some error messages: at most one fatal error message (which
- * stops the scan) and at most one warning message for each operand.
- * The vax instruction is returned in exploded form, since we have no
- * knowledge of how you parse (or evaluate) your expressions.
- * We do however strip off and decode addressing modes and operation
- * mnemonic.
- *
- * The exploded instruction is returned to a struct vit of your choice.
- * #include "vax-inst.h" to know what a struct vit is.
- *
- * This function's value is a string. If it is not "" then an internal
- * logic error was found: read this code to assign meaning to the string.
- * No argument string should generate such an error string:
- * it means a bug in our code, not in the user's text.
- *
- * You MUST have called vip_begin() once and vip_end() never before using
- * this function.
- */
-
-char * /* "" or bug string */
-vip (vitP, instring)
- struct vit *vitP; /* We build an exploded instruction here. */
- char *instring; /* Text of a vax instruction: we modify. */
-{
- register struct vot_wot *vwP; /* How to bit-encode this opcode. */
- register char *p; /* 1/skip whitespace.2/scan vot_how */
- register char *q; /* */
- register char *bug; /* "" or program logic error */
- register unsigned char count; /* counts number of operands seen */
- register struct vop *operandp;/* scan operands in struct vit */
- register char *alloperr; /* error over all operands */
- register char c; /* Remember char, (we clobber it */
- /* with '\0' temporarily). */
- register vax_opcodeT oc; /* Op-code of this instruction. */
-
- char *vip_op ();
-
- bug = "";
- if (*instring == ' ')
- ++instring; /* Skip leading whitespace. */
- for (p = instring; *p && *p != ' '; p++);; /* MUST end in end-of-string or exactly 1 space. */
- /* Scanned up to end of operation-code. */
- /* Operation-code is ended with whitespace. */
- if (p - instring == 0)
- {
- vitP->vit_error = "No operator";
- count = 0;
- memset (vitP->vit_opcode, '\0', sizeof (vitP->vit_opcode));
- }
- else
- {
- c = *p;
- *p = '\0';
- /*
- * Here with instring pointing to what better be an op-name, and p
- * pointing to character just past that.
- * We trust instring points to an op-name, with no whitespace.
- */
- vwP = (struct vot_wot *) hash_find (op_hash, instring);
- *p = c; /* Restore char after op-code. */
- if (vwP == 0)
- {
- vitP->vit_error = "Unknown operator";
- count = 0;
- memset (vitP->vit_opcode, '\0', sizeof (vitP->vit_opcode));
- }
- else
- {
- /*
- * We found a match! So lets pick up as many operands as the
- * instruction wants, and even gripe if there are too many.
- * We expect comma to seperate each operand.
- * We let instring track the text, while p tracks a part of the
- * struct vot.
- */
- /*
- * The lines below know about 2-byte opcodes starting FD,FE or FF.
- * They also understand synthetic opcodes. Note:
- * we return 32 bits of opcode, including bucky bits, BUT
- * an opcode length is either 8 or 16 bits for vit_opcode_nbytes.
- */
- oc = vwP->vot_code; /* The op-code. */
- vitP->vit_opcode_nbytes = (oc & 0xFF) >= 0xFD ? 2 : 1;
- md_number_to_chars (vitP->vit_opcode, oc, 4);
- count = 0; /* no operands seen yet */
- instring = p; /* point just past operation code */
- alloperr = "";
- for (p = vwP->vot_how, operandp = vitP->vit_operand;
- !*alloperr && !*bug && *p;
- operandp++, p += 2
- )
- {
- /*
- * Here to parse one operand. Leave instring pointing just
- * past any one ',' that marks the end of this operand.
- */
- if (!p[1])
- bug = "p"; /* ODD(!!) number of bytes in vot_how?? */
- else if (*instring)
- {
- for (q = instring; (c = *q) && c != ','; q++)
- ;
- /*
- * Q points to ',' or '\0' that ends argument. C is that
- * character.
- */
- *q = 0;
- operandp->vop_width = p[1];
- operandp->vop_nbytes = vax_operand_width_size[p[1]];
- operandp->vop_access = p[0];
- bug = vip_op (instring, operandp);
- *q = c; /* Restore input text. */
- if (*(operandp->vop_error))
- alloperr = "Bad operand";
- instring = q + (c ? 1 : 0); /* next operand (if any) */
- count++; /* won another argument, may have an operr */
- }
- else
- alloperr = "Not enough operands";
- }
- if (!*alloperr)
- {
- if (*instring == ' ')
- instring++; /* Skip whitespace. */
- if (*instring)
- alloperr = "Too many operands";
- }
- vitP->vit_error = alloperr;
- }
- }
- vitP->vit_operands = count;
- return (bug);
-}
-\f
-#ifdef test
-
-/*
- * Test program for above.
- */
-
-struct vit myvit; /* build an exploded vax instruction here */
-char answer[100]; /* human types a line of vax assembler here */
-char *mybug; /* "" or an internal logic diagnostic */
-int mycount; /* number of operands */
-struct vop *myvop; /* scan operands from myvit */
-int mysynth; /* 1 means want synthetic opcodes. */
-char my_immediate[200];
-char my_indirect[200];
-char my_displen[200];
-
-char *vip ();
-
-main ()
-{
- char *p;
- char *vip_begin ();
-
- printf ("0 means no synthetic instructions. ");
- printf ("Value for vip_begin? ");
- gets (answer);
- sscanf (answer, "%d", &mysynth);
- printf ("Synthetic opcodes %s be included.\n", mysynth ? "will" : "will not");
- printf ("enter immediate symbols eg enter # ");
- gets (my_immediate);
- printf ("enter indirect symbols eg enter @ ");
- gets (my_indirect);
- printf ("enter displen symbols eg enter ^ ");
- gets (my_displen);
- if (*(p = vip_begin (mysynth, my_immediate, my_indirect, my_displen)))
- {
- error ("vip_begin=%s", p);
- }
- printf ("An empty input line will quit you from the vax instruction parser\n");
- for (;;)
- {
- printf ("vax instruction: ");
- fflush (stdout);
- gets (answer);
- if (!*answer)
- {
- break; /* out of for each input text loop */
- }
- mybug = vip (&myvit, answer);
- if (*mybug)
- {
- printf ("BUG:\"%s\"\n", mybug);
- }
- if (*myvit.vit_error)
- {
- printf ("ERR:\"%s\"\n", myvit.vit_error);
- }
- printf ("opcode=");
- for (mycount = myvit.vit_opcode_nbytes, p = myvit.vit_opcode;
- mycount;
- mycount--, p++
- )
- {
- printf ("%02x ", *p & 0xFF);
- }
- printf (" operand count=%d.\n", mycount = myvit.vit_operands);
- for (myvop = myvit.vit_operand; mycount; mycount--, myvop++)
- {
- printf ("mode=%xx reg=%xx ndx=%xx len='%c'=%c%c%d. expr=\"",
- myvop->vop_mode, myvop->vop_reg, myvop->vop_ndx,
- myvop->vop_short, myvop->vop_access, myvop->vop_width,
- myvop->vop_nbytes);
- for (p = myvop->vop_expr_begin; p <= myvop->vop_expr_end; p++)
- {
- putchar (*p);
- }
- printf ("\"\n");
- if (*myvop->vop_error)
- {
- printf (" err:\"%s\"\n", myvop->vop_error);
- }
- if (*myvop->vop_warn)
- {
- printf (" wrn:\"%s\"\n", myvop->vop_warn);
- }
- }
- }
- vip_end ();
- exit ();
-}
-
-#endif /* #ifdef test */
-
-/* end of vax_ins_parse.c */
-
-/* JF this used to be a separate file also */
-/* vax_reg_parse.c - convert a VAX register name to a number */
-
-/* Copyright (C) 1987 Free Software Foundation, Inc. A part of GNU. */
-
-/*
- * v a x _ r e g _ p a r s e ( )
- *
- * Take 3 char.s, the last of which may be `\0` (non-existent)
- * and return the VAX register number that they represent.
- *
- * Return -1 if they don't form a register name. Good names return
- * a number from 0:15 inclusive.
- *
- * Case is not important in a name.
- *
- * Register names understood are:
- *
- * R0
- * R1
- * R2
- * R3
- * R4
- * R5
- * R6
- * R7
- * R8
- * R9
- * R10
- * R11
- * R12 AP
- * R13 FP
- * R14 SP
- * R15 PC
- *
- */
-
-#include <ctype.h>
-#define AP (12)
-#define FP (13)
-#define SP (14)
-#define PC (15)
-\f
-int /* return -1 or 0:15 */
-vax_reg_parse (c1, c2, c3) /* 3 chars of register name */
- char c1, c2, c3; /* c3 == 0 if 2-character reg name */
-{
- register int retval; /* return -1:15 */
+ {"jacbw", {"rwrwmwb!", 0xC000003d}},
+ {"jacbf", {"rfrfmfb!", 0xC000004f}},
+ {"jacbd", {"rdrdmdb!", 0xC000006f}},
+ {"jacbb", {"rbrbmbb!", 0xC000009d}},
+ {"jacbl", {"rlrlmlb!", 0xC00000f1}},
+ {"jacbg", {"rgrgmgb!", 0xC0004ffd}},
+ {"jacbh", {"rhrhmhb!", 0xC0006ffd}},
- retval = -1;
+ {"jbs", {"rlvbb?", 0x800000e0}},
+ {"jbc", {"rlvbb?", 0x800000e1}},
+ {"jbss", {"rlvbb?", 0x800000e2}},
+ {"jbcs", {"rlvbb?", 0x800000e3}},
+ {"jbsc", {"rlvbb?", 0x800000e4}},
+ {"jbcc", {"rlvbb?", 0x800000e5}},
+ {"jlbs", {"rlb?", 0x800000e8}},
+ {"jlbc", {"rlb?", 0x800000e9}},
- if (isupper (c1))
- c1 = tolower (c1);
- if (isupper (c2))
- c2 = tolower (c2);
- if (isdigit (c2) && c1 == 'r')
- {
- retval = c2 - '0';
- if (isdigit (c3))
- {
- retval = retval * 10 + c3 - '0';
- retval = (retval > 15) ? -1 : retval;
- /* clamp the register value to 1 hex digit */
- }
- else if (c3)
- retval = -1; /* c3 must be '\0' or a digit */
- }
- else if (c3) /* There are no three letter regs */
- retval = -1;
- else if (c2 == 'p')
- {
- switch (c1)
- {
- case 's':
- retval = SP;
- break;
- case 'f':
- retval = FP;
- break;
- case 'a':
- retval = AP;
- break;
- default:
- retval = -1;
- }
- }
- else if (c1 == 'p' && c2 == 'c')
- retval = PC;
- else
- retval = -1;
- return (retval);
-}
+ {"jaoblss", {"rlmlb:", 0xC00000f2}},
+ {"jaobleq", {"rlmlb:", 0xC00000f3}},
+ {"jsobgeq", {"mlb:", 0xC00000f4}},
+ {"jsobgtr", {"mlb:", 0xC00000f5}},
+
+/* CASEx has no branch addresses in our conception of it. */
+/* You should use ".word ..." statements after the "case ...". */
-/*
- * v i p _ o p ( )
- *
- * Parse a vax operand in DEC assembler notation.
- * For speed, expect a string of whitespace to be reduced to a single ' '.
- * This is the case for GNU AS, and is easy for other DEC-compatible
- * assemblers.
- *
- * Knowledge about DEC VAX assembler operand notation lives here.
- * This doesn't even know what a register name is, except it believes
- * all register names are 2 or 3 characters, and lets vax_reg_parse() say
- * what number each name represents.
- * It does, however, know that PC, SP etc are special registers so it can
- * detect addressing modes that are silly for those registers.
- *
- * Where possible, it delivers 1 fatal or 1 warning message if the operand
- * is suspect. Exactly what we test for is still evolving.
- */
-
-/*
- * B u g s
- *
- * Arg block.
- *
- * There were a number of 'mismatched argument type' bugs to vip_op.
- * The most general solution is to typedef each (of many) arguments.
- * We used instead a typedef'd argument block. This is less modular
- * than using seperate return pointers for each result, but runs faster
- * on most engines, and seems to keep programmers happy. It will have
- * to be done properly if we ever want to use vip_op as a general-purpose
- * module (it was designed to be).
- *
- * G^
- *
- * Doesn't support DEC "G^" format operands. These always take 5 bytes
- * to express, and code as modes 8F or 9F. Reason: "G^" deprives you of
- * optimising to (say) a "B^" if you are lucky in the way you link.
- * When someone builds a linker smart enough to convert "G^" to "B^", "W^"
- * whenever possible, then we should implement it.
- * If there is some other use for "G^", feel free to code it in!
- *
- *
- * speed
- *
- * If I nested if()s more, I could avoid testing (*err) which would save
- * time, space and page faults. I didn't nest all those if()s for clarity
- * and because I think the mode testing can be re-arranged 1st to test the
- * commoner constructs 1st. Does anybody have statistics on this?
- *
- *
- *
- * error messages
- *
- * In future, we should be able to 'compose' error messages in a scratch area
- * and give the user MUCH more informative error messages. Although this takes
- * a little more code at run-time, it will make this module much more self-
- * documenting. As an example of what sucks now: most error messages have
- * hardwired into them the DEC VAX metacharacters "#^@" which are nothing like
- * the Un*x characters "$`*", that most users will expect from this AS.
- */
+ {"", {"", 0}} /* Empty is end sentinel. */
+};
\f
-/*
- * The input is a string, ending with '\0'.
- *
- * We also require a 'hint' of what kind of operand is expected: so
- * we can remind caller not to write into literals for instance.
- *
- * The output is a skeletal instruction.
- *
- * The algorithm has two parts.
- * 1. extract the syntactic features (parse off all the @^#-()+[] mode crud);
- * 2. express the @^#-()+[] as some parameters suited to further analysis.
- *
- * 2nd step is where we detect the googles of possible invalid combinations
- * a human (or compiler) might write. Note that if we do a half-way
- * decent assembler, we don't know how long to make (eg) displacement
- * fields when we first meet them (because they may not have defined values).
- * So we must wait until we know how many bits are needed for each address,
- * then we can know both length and opcodes of instructions.
- * For reason(s) above, we will pass to our caller a 'broken' instruction
- * of these major components, from which our caller can generate instructions:
- * - displacement length I^ S^ L^ B^ W^ unspecified
- * - mode (many)
- * - register R0-R15 or absent
- * - index register R0-R15 or absent
- * - expression text what we don't parse
- * - error text(s) why we couldn't understand the operand
- */
-
-/*
- * To decode output of this, test errtxt. If errtxt[0] == '\0', then
- * we had no errors that prevented parsing. Also, if we ever report
- * an internal bug, errtxt[0] is set non-zero. So one test tells you
- * if the other outputs are to be taken seriously.
- */
-
-
-/* vax registers we need to know */
-/* JF #define SP (14) */
-/* JF for one big happy file #define PC (15) */
-
-/*
- * Because this module is useful for both VMS and UN*X style assemblers
- * and because of the variety of UN*X assemblers we must recognise
- * the different conventions for assembler operand notation. For example
- * VMS says "#42" for immediate mode, while most UN*X say "$42".
- * We permit arbitrary sets of (single) characters to represent the
- * 3 concepts that DEC writes '#', '@', '^'.
- */
-
-/* character tests */
+/* Because this module is useful for both VMS and UN*X style assemblers
+ and because of the variety of UN*X assemblers we must recognise
+ the different conventions for assembler operand notation. For example
+ VMS says "#42" for immediate mode, while most UN*X say "$42".
+ We permit arbitrary sets of (single) characters to represent the
+ 3 concepts that DEC writes '#', '@', '^'. */
+
+/* Character tests. */
#define VIP_IMMEDIATE 01 /* Character is like DEC # */
#define VIP_INDIRECT 02 /* Char is like DEC @ */
#define VIP_DISPLEN 04 /* Char is like DEC ^ */
-#define IMMEDIATEP(c) (vip_metacharacters [(c)&0xff]&VIP_IMMEDIATE)
-#define INDIRECTP(c) (vip_metacharacters [(c)&0xff]&VIP_INDIRECT)
-#define DISPLENP(c) (vip_metacharacters [(c)&0xff]&VIP_DISPLEN)
+#define IMMEDIATEP(c) (vip_metacharacters [(c) & 0xff] & VIP_IMMEDIATE)
+#define INDIRECTP(c) (vip_metacharacters [(c) & 0xff] & VIP_INDIRECT)
+#define DISPLENP(c) (vip_metacharacters [(c) & 0xff] & VIP_DISPLEN)
/* We assume 8 bits per byte. Use vip_op_defaults() to set these up BEFORE we
- * are ever called.
- */
+ are ever called. */
#if defined(CONST_TABLE)
#define _ 0,
#define S VIP_INDIRECT,
#define D VIP_DISPLEN,
static const char
- vip_metacharacters[256] =
+vip_metacharacters[256] =
{
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ /* ^@ ^A ^B ^C ^D ^E ^F ^G ^H ^I ^J ^K ^L ^M ^N ^O*/
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ /* ^P ^Q ^R ^S ^T ^U ^V ^W ^X ^Y ^Z ^[ ^\ ^] ^^ ^_ */
#undef I
#undef S
#undef D
+
#else
+
static char vip_metacharacters[256];
-/* Macro is faster under GCC; The constant table is faster yet, but only works with ASCII */
-#if 0
-static
-#ifdef __GNUC__
- inline
-#endif
static void
-vip_op_1 (bit, syms)
- int bit;
- char *syms;
+vip_op_1 (int bit, const char *syms)
{
unsigned char t;
- while (t = *syms++)
+ while ((t = *syms++) != 0)
vip_metacharacters[t] |= bit;
}
-#else
-#define vip_op_1(bit,syms) { \
- unsigned char t; \
- char *table=vip_metacharacters; \
- while(t= *syms++) \
- table[t]|=bit; \
- }
-#endif
-
-static void
-vip_op_defaults (immediate, indirect, displen) /* can be called any time */
- char *immediate; /* Strings of characters for each job. */
- char *indirect;
- char *displen; /* more arguments may appear in future! */
+/* Can be called any time. More arguments may appear in future. */
+static void
+vip_op_defaults (const char *immediate, const char *indirect, const char *displen)
{
vip_op_1 (VIP_IMMEDIATE, immediate);
vip_op_1 (VIP_INDIRECT, indirect);
vip_op_1 (VIP_DISPLEN, displen);
+}
+
+#endif
+
+/* Call me once before you decode any lines.
+ I decode votstrs into a hash table at op_hash (which I create).
+ I return an error text or null.
+ If you want, I will include the 'synthetic' jXXX instructions in the
+ instruction table.
+ You must nominate metacharacters for eg DEC's "#", "@", "^". */
+
+static const char *
+vip_begin (int synthetic_too, /* 1 means include jXXX op-codes. */
+ const char *immediate,
+ const char *indirect,
+ const char *displen)
+{
+ const struct vot *vP; /* scan votstrs */
+ const char *retval = 0; /* error text */
- return;
+ op_hash = hash_new ();
+
+ for (vP = votstrs; *vP->vot_name && !retval; vP++)
+ retval = hash_insert (op_hash, vP->vot_name, (PTR) &vP->vot_detail);
+
+ if (synthetic_too)
+ for (vP = synthetic_votstrs; *vP->vot_name && !retval; vP++)
+ retval = hash_insert (op_hash, vP->vot_name, (PTR) &vP->vot_detail);
+
+#ifndef CONST_TABLE
+ vip_op_defaults (immediate, indirect, displen);
+#endif
+
+ return retval;
}
+/* Take 3 char.s, the last of which may be `\0` (non-existent)
+ and return the VAX register number that they represent.
+
+ Return -1 if they don't form a register name. Good names return
+ a number from 0:15 inclusive.
+
+ Case is not important in a name.
+
+ Register names understood are:
+
+ R0
+ R1
+ R2
+ R3
+ R4
+ R5
+ R6
+ R7
+ R8
+ R9
+ R10
+ R11
+ R12 AP
+ R13 FP
+ R14 SP
+ R15 PC */
+
+#define AP 12
+#define FP 13
+#define SP 14
+#define PC 15
+
+/* Returns the register number of something like '%r15' or 'ap', supplied
+ in four single chars. Returns -1 if the register isn't recognized,
+ 0..15 otherwise. */
+static int
+vax_reg_parse (char c1, char c2, char c3, char c4)
+{
+ int retval = -1;
+
+#ifdef OBJ_ELF
+ if (c1 != '%') /* Register prefixes are mandatory for ELF. */
+ return retval;
+ c1 = c2;
+ c2 = c3;
+ c3 = c4;
+#endif
+#ifdef OBJ_VMS
+ if (c4 != 0) /* Register prefixes are not allowed under VMS. */
+ return retval;
+#endif
+#ifdef OBJ_AOUT
+ if (c1 == '%') /* Register prefixes are optional under a.out. */
+ {
+ c1 = c2;
+ c2 = c3;
+ c3 = c4;
+ }
+ else if (c3 && c4) /* Can't be 4 characters long. */
+ return retval;
#endif
-\f
-/*
- * Dec defines the semantics of address modes (and values)
- * by a two-letter code, explained here.
- *
- * letter 1: access type
- *
- * a address calculation - no data access, registers forbidden
- * b branch displacement
- * m read - let go of bus - write back "modify"
- * r read
- * v bit field address: like 'a' but registers are OK
- * w write
- * space no operator (eg ".long foo") [our convention]
- *
- * letter 2: data type (i.e. width, alignment)
- *
- * b byte
- * d double precision floating point (D format)
- * f single precision floating point (F format)
- * g G format floating
- * h H format floating
- * l longword
- * o octaword
- * q quadword
- * w word
- * ? simple synthetic branch operand
- * - unconditional synthetic JSB/JSR operand
- * ! complex synthetic branch operand
- *
- * The '-?!' letter 2's are not for external consumption. They are used
- * for various assemblers. Generally, all unknown widths are assumed 0.
- * We don't limit your choice of width character.
- *
- * DEC operands are hard work to parse. For example, '@' as the first
- * character means indirect (deferred) mode but elswhere it is a shift
- * operator.
- * The long-winded explanation of how this is supposed to work is
- * cancelled. Read a DEC vax manual.
- * We try hard not to parse anything that MIGHT be part of the expression
- * buried in that syntax. For example if we see @...(Rn) we don't check
- * for '-' before the '(' because mode @-(Rn) does not exist.
- *
- * After parsing we have:
- *
- * at 1 if leading '@' (or Un*x '*')
- * len takes one value from " bilsw". eg B^ -> 'b'.
- * hash 1 if leading '#' (or Un*x '$')
- * expr_begin, expr_end the expression we did not parse
- * even though we don't interpret it, we make use
- * of its presence or absence.
- * sign -1: -(Rn) 0: absent +1: (Rn)+
- * paren 1 if () are around register
- * reg major register number 0:15 -1 means absent
- * ndx index register number 0:15 -1 means absent
- *
- * Again, I dare not explain it: just trace ALL the code!
- */
-\f
-char * /* (code here) bug message, "" = OK */
-/* our code bug, NOT bad assembly language */
-vip_op (optext, vopP)
- char *optext; /* user's input string e.g.: */
- /* "@B^foo@bar(AP)[FP]:" */
- struct vop *vopP; /* In: vop_access, vop_width. */
- /* Out: _ndx, _reg, _mode, _short, _warn, */
- /* _error _expr_begin, _expr_end, _nbytes. */
- /* vop_nbytes : number of bytes in a datum. */
+ c1 = TOLOWER (c1);
+ c2 = TOLOWER (c2);
+ if (ISDIGIT (c2) && c1 == 'r')
+ {
+ retval = c2 - '0';
+ if (ISDIGIT (c3))
+ {
+ retval = retval * 10 + c3 - '0';
+ retval = (retval > 15) ? -1 : retval;
+ /* clamp the register value to 1 hex digit */
+ }
+ else if (c3)
+ retval = -1; /* c3 must be '\0' or a digit. */
+ }
+ else if (c3) /* There are no three letter regs. */
+ retval = -1;
+ else if (c2 == 'p')
+ {
+ switch (c1)
+ {
+ case 's':
+ retval = SP;
+ break;
+ case 'f':
+ retval = FP;
+ break;
+ case 'a':
+ retval = AP;
+ break;
+ default:
+ retval = -1;
+ }
+ }
+ else if (c1 == 'p' && c2 == 'c')
+ retval = PC;
+ else
+ retval = -1;
+ return retval;
+}
+
+/* Parse a vax operand in DEC assembler notation.
+ For speed, expect a string of whitespace to be reduced to a single ' '.
+ This is the case for GNU AS, and is easy for other DEC-compatible
+ assemblers.
+
+ Knowledge about DEC VAX assembler operand notation lives here.
+ This doesn't even know what a register name is, except it believes
+ all register names are 2 or 3 characters, and lets vax_reg_parse() say
+ what number each name represents.
+ It does, however, know that PC, SP etc are special registers so it can
+ detect addressing modes that are silly for those registers.
+
+ Where possible, it delivers 1 fatal or 1 warning message if the operand
+ is suspect. Exactly what we test for is still evolving.
+
+ ---
+ Arg block.
+
+ There were a number of 'mismatched argument type' bugs to vip_op.
+ The most general solution is to typedef each (of many) arguments.
+ We used instead a typedef'd argument block. This is less modular
+ than using separate return pointers for each result, but runs faster
+ on most engines, and seems to keep programmers happy. It will have
+ to be done properly if we ever want to use vip_op as a general-purpose
+ module (it was designed to be).
+
+ G^
+
+ Doesn't support DEC "G^" format operands. These always take 5 bytes
+ to express, and code as modes 8F or 9F. Reason: "G^" deprives you of
+ optimising to (say) a "B^" if you are lucky in the way you link.
+ When someone builds a linker smart enough to convert "G^" to "B^", "W^"
+ whenever possible, then we should implement it.
+ If there is some other use for "G^", feel free to code it in!
+
+ speed
+
+ If I nested if()s more, I could avoid testing (*err) which would save
+ time, space and page faults. I didn't nest all those if()s for clarity
+ and because I think the mode testing can be re-arranged 1st to test the
+ commoner constructs 1st. Does anybody have statistics on this?
+
+ error messages
+
+ In future, we should be able to 'compose' error messages in a scratch area
+ and give the user MUCH more informative error messages. Although this takes
+ a little more code at run-time, it will make this module much more self-
+ documenting. As an example of what sucks now: most error messages have
+ hardwired into them the DEC VAX metacharacters "#^@" which are nothing like
+ the Un*x characters "$`*", that most users will expect from this AS.
+
+ ----
+
+ The input is a string, ending with '\0'.
+
+ We also require a 'hint' of what kind of operand is expected: so
+ we can remind caller not to write into literals for instance.
+
+ The output is a skeletal instruction.
+
+ The algorithm has two parts.
+ 1. extract the syntactic features (parse off all the @^#-()+[] mode crud);
+ 2. express the @^#-()+[] as some parameters suited to further analysis.
+
+ 2nd step is where we detect the googles of possible invalid combinations
+ a human (or compiler) might write. Note that if we do a half-way
+ decent assembler, we don't know how long to make (eg) displacement
+ fields when we first meet them (because they may not have defined values).
+ So we must wait until we know how many bits are needed for each address,
+ then we can know both length and opcodes of instructions.
+ For reason(s) above, we will pass to our caller a 'broken' instruction
+ of these major components, from which our caller can generate instructions:
+ - displacement length I^ S^ L^ B^ W^ unspecified
+ - mode (many)
+ - register R0-R15 or absent
+ - index register R0-R15 or absent
+ - expression text what we don't parse
+ - error text(s) why we couldn't understand the operand
+
+ ----
+
+ To decode output of this, test errtxt. If errtxt[0] == '\0', then
+ we had no errors that prevented parsing. Also, if we ever report
+ an internal bug, errtxt[0] is set non-zero. So one test tells you
+ if the other outputs are to be taken seriously.
+
+ ----
+
+ Dec defines the semantics of address modes (and values)
+ by a two-letter code, explained here.
+
+ letter 1: access type
+
+ a address calculation - no data access, registers forbidden
+ b branch displacement
+ m read - let go of bus - write back "modify"
+ r read
+ v bit field address: like 'a' but registers are OK
+ w write
+ space no operator (eg ".long foo") [our convention]
+
+ letter 2: data type (i.e. width, alignment)
+
+ b byte
+ d double precision floating point (D format)
+ f single precision floating point (F format)
+ g G format floating
+ h H format floating
+ l longword
+ o octaword
+ q quadword
+ w word
+ ? simple synthetic branch operand
+ - unconditional synthetic JSB/JSR operand
+ ! complex synthetic branch operand
+
+ The '-?!' letter 2's are not for external consumption. They are used
+ for various assemblers. Generally, all unknown widths are assumed 0.
+ We don't limit your choice of width character.
+
+ DEC operands are hard work to parse. For example, '@' as the first
+ character means indirect (deferred) mode but elsewhere it is a shift
+ operator.
+ The long-winded explanation of how this is supposed to work is
+ cancelled. Read a DEC vax manual.
+ We try hard not to parse anything that MIGHT be part of the expression
+ buried in that syntax. For example if we see @...(Rn) we don't check
+ for '-' before the '(' because mode @-(Rn) does not exist.
+
+ After parsing we have:
+
+ at 1 if leading '@' (or Un*x '*')
+ len takes one value from " bilsw". eg B^ -> 'b'.
+ hash 1 if leading '#' (or Un*x '$')
+ expr_begin, expr_end the expression we did not parse
+ even though we don't interpret it, we make use
+ of its presence or absence.
+ sign -1: -(Rn) 0: absent +1: (Rn)+
+ paren 1 if () are around register
+ reg major register number 0:15 -1 means absent
+ ndx index register number 0:15 -1 means absent
+
+ Again, I dare not explain it: just trace ALL the code!
+
+ Summary of vip_op outputs.
+
+ mode reg len ndx
+ (Rn) => @Rn
+ {@}Rn 5+@ n ' ' optional
+ branch operand 0 -1 ' ' -1
+ S^#foo 0 -1 's' -1
+ -(Rn) 7 n ' ' optional
+ {@}(Rn)+ 8+@ n ' ' optional
+ {@}#foo, no S^ 8+@ PC " i" optional
+ {@}{q^}{(Rn)} 10+@+q option " bwl" optional */
+
+/* Dissect user-input 'optext' (which is something like "@B^foo@bar(AP)[FP]:")
+ using the vop in vopP. vopP's vop_access and vop_width. We fill _ndx, _reg,
+ _mode, _short, _warn, _error, _expr_begin, _expr_end and _nbytes. */
+
+static void
+vip_op (char *optext, struct vop *vopP)
{
- char *p; /* track operand text forward */
- char *q; /* track operand text backward */
- int at; /* 1 if leading '@' ('*') seen */
- char len; /* one of " bilsw" */
- int hash; /* 1 if leading '#' ('$') seen */
- int sign = 0; /* -1, 0 or +1 */
- int paren = 0; /* 1 if () surround register */
- int reg = 0; /* register number, -1:absent */
- int ndx = 0; /* index register number -1:absent */
- char *bug; /* report any logic error in here, ""==OK */
- char *err; /* report illegal operand, ""==OK */
- /* " " is a FAKE error: means we won */
- /* ANY err that begins with ' ' is a fake. */
- /* " " is converted to "" before return */
- char *wrn; /* warn about weird modes pf address */
- char *oldq = NULL; /* preserve q in case we backup */
- int mode = 0; /* build up 4-bit operand mode here */
- /* note: index mode is in ndx, this is */
- /* the major mode of operand address */
- /*
- * Notice how we move wrong-arg-type bugs INSIDE this module: if we
- * get the types wrong below, we lose at compile time rather than at
- * lint or run time.
- */
- char access; /* vop_access. */
- char width; /* vop_width. */
-
- int vax_reg_parse (); /* returns 0:15 or -1 if not a register */
-
- access = vopP->vop_access;
+ /* Track operand text forward. */
+ char *p;
+ /* Track operand text backward. */
+ char *q;
+ /* 1 if leading '@' ('*') seen. */
+ int at;
+ /* one of " bilsw" */
+ char len;
+ /* 1 if leading '#' ('$') seen. */
+ int hash;
+ /* -1, 0 or +1. */
+ int sign = 0;
+ /* 1 if () surround register. */
+ int paren = 0;
+ /* Register number, -1:absent. */
+ int reg = 0;
+ /* Index register number -1:absent. */
+ int ndx = 0;
+ /* Report illegal operand, ""==OK. */
+ /* " " is a FAKE error: means we won. */
+ /* ANY err that begins with ' ' is a fake. */
+ /* " " is converted to "" before return. */
+ const char *err;
+ /* Warn about weird modes pf address. */
+ const char *wrn;
+ /* Preserve q in case we backup. */
+ char *oldq = NULL;
+ /* Build up 4-bit operand mode here. */
+ /* Note: index mode is in ndx, this is. */
+ /* The major mode of operand address. */
+ int mode = 0;
+ /* Notice how we move wrong-arg-type bugs INSIDE this module: if we
+ get the types wrong below, we lose at compile time rather than at
+ lint or run time. */
+ char access_mode; /* vop_access. */
+ char width; /* vop_width. */
+
+ access_mode = vopP->vop_access;
width = vopP->vop_width;
- bug = /* none of our code bugs (yet) */
- err = /* no user text errors */
- wrn = ""; /* no warnings even */
+ /* None of our code bugs (yet), no user text errors, no warnings
+ even. */
+ err = wrn = 0;
p = optext;
- if (*p == ' ') /* Expect all whitespace reduced to ' '. */
+ if (*p == ' ') /* Expect all whitespace reduced to ' '. */
p++; /* skip over whitespace */
- if (at = INDIRECTP (*p))
+ if ((at = INDIRECTP (*p)) != 0)
{ /* 1 if *p=='@'(or '*' for Un*x) */
p++; /* at is determined */
- if (*p == ' ') /* Expect all whitespace reduced to ' '. */
+ if (*p == ' ') /* Expect all whitespace reduced to ' '. */
p++; /* skip over whitespace */
}
- /*
- * This code is subtle. It tries to detect all legal (letter)'^'
- * but it doesn't waste time explicitly testing for premature '\0' because
- * this case is rejected as a mismatch against either (letter) or '^'.
- */
+ /* This code is subtle. It tries to detect all legal (letter)'^'
+ but it doesn't waste time explicitly testing for premature '\0' because
+ this case is rejected as a mismatch against either (letter) or '^'. */
{
- register char c;
+ char c;
c = *p;
- if (isupper (c))
- c = tolower (c);
+ c = TOLOWER (c);
if (DISPLENP (p[1]) && strchr ("bilws", len = c))
- p += 2; /* skip (letter) '^' */
- else /* no (letter) '^' seen */
- len = ' '; /* len is determined */
+ p += 2; /* Skip (letter) '^'. */
+ else /* No (letter) '^' seen. */
+ len = ' '; /* Len is determined. */
}
- if (*p == ' ') /* Expect all whitespace reduced to ' '. */
- p++; /* skip over whitespace */
+ if (*p == ' ') /* Expect all whitespace reduced to ' '. */
+ p++;
- if (hash = IMMEDIATEP (*p)) /* 1 if *p=='#' ('$' for Un*x) */
- p++; /* hash is determined */
+ if ((hash = IMMEDIATEP (*p)) != 0) /* 1 if *p=='#' ('$' for Un*x) */
+ p++; /* Hash is determined. */
- /*
- * p points to what may be the beginning of an expression.
- * We have peeled off the front all that is peelable.
- * We know at, len, hash.
- *
- * Lets point q at the end of the text and parse that (backwards).
- */
+ /* p points to what may be the beginning of an expression.
+ We have peeled off the front all that is peelable.
+ We know at, len, hash.
+
+ Lets point q at the end of the text and parse that (backwards). */
for (q = p; *q; q++)
;
- q--; /* now q points at last char of text */
-\f
- if (*q == ' ' && q >= p) /* Expect all whitespace reduced to ' '. */
+ q--; /* Now q points at last char of text. */
+
+ if (*q == ' ' && q >= p) /* Expect all whitespace reduced to ' '. */
q--;
- /* reverse over whitespace, but don't */
- /* run back over *p */
-
- /*
- * As a matter of policy here, we look for [Rn], although both Rn and S^#
- * forbid [Rn]. This is because it is easy, and because only a sick
- * cyborg would have [...] trailing an expression in a VAX-like assembler.
- * A meticulous parser would first check for Rn followed by '(' or '['
- * and not parse a trailing ']' if it found another. We just ban expressions
- * ending in ']'.
- */
+
+ /* Reverse over whitespace, but don't. */
+ /* Run back over *p. */
+
+ /* As a matter of policy here, we look for [Rn], although both Rn and S^#
+ forbid [Rn]. This is because it is easy, and because only a sick
+ cyborg would have [...] trailing an expression in a VAX-like assembler.
+ A meticulous parser would first check for Rn followed by '(' or '['
+ and not parse a trailing ']' if it found another. We just ban expressions
+ ending in ']'. */
if (*q == ']')
{
while (q >= p && *q != '[')
q--;
- /* either q<p or we got matching '[' */
+ /* Either q<p or we got matching '['. */
if (q < p)
- err = "no '[' to match ']'";
+ err = _("no '[' to match ']'");
else
{
- /*
- * Confusers like "[]" will eventually lose with a bad register
- * name error. So again we don't need to check for early '\0'.
- */
+ /* Confusers like "[]" will eventually lose with a bad register
+ * name error. So again we don't need to check for early '\0'. */
if (q[3] == ']')
- ndx = vax_reg_parse (q[1], q[2], 0);
+ ndx = vax_reg_parse (q[1], q[2], 0, 0);
else if (q[4] == ']')
- ndx = vax_reg_parse (q[1], q[2], q[3]);
+ ndx = vax_reg_parse (q[1], q[2], q[3], 0);
+ else if (q[5] == ']')
+ ndx = vax_reg_parse (q[1], q[2], q[3], q[4]);
else
ndx = -1;
- /*
- * Since we saw a ']' we will demand a register name in the [].
- * If luser hasn't given us one: be rude.
- */
+ /* Since we saw a ']' we will demand a register name in the [].
+ * If luser hasn't given us one: be rude. */
if (ndx < 0)
- err = "bad register in []";
+ err = _("bad register in []");
else if (ndx == PC)
- err = "[PC] index banned";
+ err = _("[PC] index banned");
else
- q--; /* point q just before "[...]" */
+ /* Point q just before "[...]". */
+ q--;
}
}
else
- ndx = -1; /* no ']', so no iNDeX register */
+ /* No ']', so no iNDeX register. */
+ ndx = -1;
- /*
- * If err = "..." then we lost: run away.
- * Otherwise ndx == -1 if there was no "[...]".
- * Otherwise, ndx is index register number, and q points before "[...]".
- */
-\f
- if (*q == ' ' && q >= p) /* Expect all whitespace reduced to ' '. */
+ /* If err = "..." then we lost: run away.
+ Otherwise ndx == -1 if there was no "[...]".
+ Otherwise, ndx is index register number, and q points before "[...]". */
+
+ if (*q == ' ' && q >= p) /* Expect all whitespace reduced to ' '. */
q--;
- /* reverse over whitespace, but don't */
- /* run back over *p */
- if (!*err)
+ /* Reverse over whitespace, but don't. */
+ /* Run back over *p. */
+ if (!err || !*err)
{
- sign = 0; /* no ()+ or -() seen yet */
+ /* no ()+ or -() seen yet */
+ sign = 0;
if (q > p + 3 && *q == '+' && q[-1] == ')')
{
q--;
/* either q<p or we got matching '(' */
if (q < p)
- err = "no '(' to match ')'";
+ err = _("no '(' to match ')'");
else
{
- /*
- * Confusers like "()" will eventually lose with a bad register
- * name error. So again we don't need to check for early '\0'.
- */
+ /* Confusers like "()" will eventually lose with a bad register
+ name error. So again we don't need to check for early '\0'. */
if (q[3] == ')')
- reg = vax_reg_parse (q[1], q[2], 0);
+ reg = vax_reg_parse (q[1], q[2], 0, 0);
else if (q[4] == ')')
- reg = vax_reg_parse (q[1], q[2], q[3]);
+ reg = vax_reg_parse (q[1], q[2], q[3], 0);
+ else if (q[5] == ')')
+ reg = vax_reg_parse (q[1], q[2], q[3], q[4]);
else
reg = -1;
- /*
- * Since we saw a ')' we will demand a register name in the ')'.
- * This is nasty: why can't our hypothetical assembler permit
- * parenthesised expressions? BECAUSE I AM LAZY! That is why.
- * Abuse luser if we didn't spy a register name.
- */
+ /* Since we saw a ')' we will demand a register name in the ')'.
+ This is nasty: why can't our hypothetical assembler permit
+ parenthesised expressions? BECAUSE I AM LAZY! That is why.
+ Abuse luser if we didn't spy a register name. */
if (reg < 0)
{
- /* JF allow parenthasized expressions. I hope this works */
+ /* JF allow parenthesized expressions. I hope this works. */
paren = 0;
while (*q != ')')
q++;
}
else
q--; /* point just before '(' of "(...)" */
- /*
- * If err == "..." then we lost. Run away.
- * Otherwise if reg >= 0 then we saw (Rn).
- */
+ /* If err == "..." then we lost. Run away.
+ Otherwise if reg >= 0 then we saw (Rn). */
}
- /*
- * If err == "..." then we lost.
- * Otherwise paren==1 and reg = register in "()".
- */
+ /* If err == "..." then we lost.
+ Otherwise paren==1 and reg = register in "()". */
}
else
paren = 0;
- /*
- * If err == "..." then we lost.
- * Otherwise, q points just before "(Rn)", if any.
- * If there was a "(...)" then paren==1, and reg is the register.
- */
-\f
- /*
- * We should only seek '-' of "-(...)" if:
- * we saw "(...)" paren == 1
- * we have no errors so far ! *err
- * we did not see '+' of "(...)+" sign < 1
- * We don't check len. We want a specific error message later if
- * user tries "x^...-(Rn)". This is a feature not a bug.
- */
- if (!*err)
+ /* If err == "..." then we lost.
+ Otherwise, q points just before "(Rn)", if any.
+ If there was a "(...)" then paren==1, and reg is the register. */
+
+ /* We should only seek '-' of "-(...)" if:
+ we saw "(...)" paren == 1
+ we have no errors so far ! *err
+ we did not see '+' of "(...)+" sign < 1
+ We don't check len. We want a specific error message later if
+ user tries "x^...-(Rn)". This is a feature not a bug. */
+ if (!err || !*err)
{
if (paren && sign < 1)/* !sign is adequate test */
{
q--;
}
}
- /*
- * We have back-tracked over most
- * of the crud at the end of an operand.
- * Unless err, we know: sign, paren. If paren, we know reg.
- * The last case is of an expression "Rn".
- * This is worth hunting for if !err, !paren.
- * We wouldn't be here if err.
- * We remember to save q, in case we didn't want "Rn" anyway.
- */
+ /* We have back-tracked over most
+ of the crud at the end of an operand.
+ Unless err, we know: sign, paren. If paren, we know reg.
+ The last case is of an expression "Rn".
+ This is worth hunting for if !err, !paren.
+ We wouldn't be here if err.
+ We remember to save q, in case we didn't want "Rn" anyway. */
if (!paren)
{
- if (*q == ' ' && q >= p) /* Expect all whitespace reduced to ' '. */
+ if (*q == ' ' && q >= p) /* Expect all whitespace reduced to ' '. */
q--;
- /* reverse over whitespace, but don't */
- /* run back over *p */
- if (q > p && q < p + 3) /* room for Rn or Rnn exactly? */
- reg = vax_reg_parse (p[0], p[1], q < p + 2 ? 0 : p[2]);
+ /* Reverse over whitespace, but don't. */
+ /* Run back over *p. */
+ /* Room for Rn or Rnn (include prefix) exactly? */
+ if (q > p && q < p + 4)
+ reg = vax_reg_parse (p[0], p[1],
+ q < p + 2 ? 0 : p[2],
+ q < p + 3 ? 0 : p[3]);
else
- reg = -1; /* always comes here if no register at all */
- /*
- * Here with a definitive reg value.
- */
+ reg = -1; /* Always comes here if no register at all. */
+ /* Here with a definitive reg value. */
if (reg >= 0)
{
oldq = q;
}
}
}
- /*
- * have reg. -1:absent; else 0:15
- */
-
- /*
- * We have: err, at, len, hash, ndx, sign, paren, reg.
- * Also, any remaining expression is from *p through *q inclusive.
- * Should there be no expression, q==p-1. So expression length = q-p+1.
- * This completes the first part: parsing the operand text.
- */
+ /* have reg. -1:absent; else 0:15. */
+
+ /* We have: err, at, len, hash, ndx, sign, paren, reg.
+ Also, any remaining expression is from *p through *q inclusive.
+ Should there be no expression, q==p-1. So expression length = q-p+1.
+ This completes the first part: parsing the operand text. */
\f
- /*
- * We now want to boil the data down, checking consistency on the way.
- * We want: len, mode, reg, ndx, err, p, q, wrn, bug.
- * We will deliver a 4-bit reg, and a 4-bit mode.
- */
-
- /*
- * Case of branch operand. Different. No L^B^W^I^S^ allowed for instance.
- *
- * in: at ?
- * len ?
- * hash ?
- * p:q ?
- * sign ?
- * paren ?
- * reg ?
- * ndx ?
- *
- * out: mode 0
- * reg -1
- * len ' '
- * p:q whatever was input
- * ndx -1
- * err " " or error message, and other outputs trashed
- */
- /* branch operands have restricted forms */
- if (!*err && access == 'b')
+ /* We now want to boil the data down, checking consistency on the way.
+ We want: len, mode, reg, ndx, err, p, q, wrn, bug.
+ We will deliver a 4-bit reg, and a 4-bit mode. */
+
+ /* Case of branch operand. Different. No L^B^W^I^S^ allowed for instance.
+
+ in: at ?
+ len ?
+ hash ?
+ p:q ?
+ sign ?
+ paren ?
+ reg ?
+ ndx ?
+
+ out: mode 0
+ reg -1
+ len ' '
+ p:q whatever was input
+ ndx -1
+ err " " or error message, and other outputs trashed. */
+ /* Branch operands have restricted forms. */
+ if ((!err || !*err) && access_mode == 'b')
{
if (at || hash || sign || paren || ndx >= 0 || reg >= 0 || len != ' ')
- err = "invalid branch operand";
+ err = _("invalid branch operand");
else
err = " ";
}
-\f
- /* Since nobody seems to use it: comment this 'feature'(?) out for now. */
+
+ /* Since nobody seems to use it: comment this 'feature'(?) out for now. */
#ifdef NEVER
- /*
- * Case of stand-alone operand. e.g. ".long foo"
- *
- * in: at ?
- * len ?
- * hash ?
- * p:q ?
- * sign ?
- * paren ?
- * reg ?
- * ndx ?
- *
- * out: mode 0
- * reg -1
- * len ' '
- * p:q whatever was input
- * ndx -1
- * err " " or error message, and other outputs trashed
- */
- if (!*err)
+ /* Case of stand-alone operand. e.g. ".long foo"
+
+ in: at ?
+ len ?
+ hash ?
+ p:q ?
+ sign ?
+ paren ?
+ reg ?
+ ndx ?
+
+ out: mode 0
+ reg -1
+ len ' '
+ p:q whatever was input
+ ndx -1
+ err " " or error message, and other outputs trashed. */
+ if ((!err || !*err) && access_mode == ' ')
{
- if (access == ' ')
- { /* addresses have restricted forms */
- if (at)
- err = "address prohibits @";
+ if (at)
+ err = _("address prohibits @");
+ else if (hash)
+ err = _("address prohibits #");
+ else if (sign)
+ {
+ if (sign < 0)
+ err = _("address prohibits -()");
else
- {
- if (hash)
- err = "address prohibits #";
- else
- {
- if (sign)
- {
- if (sign < 0)
- err = "address prohibits -()";
- else
- err = "address prohibits ()+";
- }
- else
- {
- if (paren)
- err = "address prohibits ()";
- else
- {
- if (ndx >= 0)
- err = "address prohibits []";
- else
- {
- if (reg >= 0)
- err = "address prohibits register";
- else
- {
- if (len != ' ')
- err = "address prohibits displacement length specifier";
- else
- {
- err = " "; /* succeed */
- mode = 0;
- }
- }
- }
- }
- }
- }
- }
+ err = _("address prohibits ()+");
+ }
+ else if (paren)
+ err = _("address prohibits ()");
+ else if (ndx >= 0)
+ err = _("address prohibits []");
+ else if (reg >= 0)
+ err = _("address prohibits register");
+ else if (len != ' ')
+ err = _("address prohibits displacement length specifier");
+ else
+ {
+ err = " "; /* succeed */
+ mode = 0;
}
}
-#endif /*#Ifdef NEVER*/
-\f
- /*
- * Case of S^#.
- *
- * in: at 0
- * len 's' definition
- * hash 1 demand
- * p:q demand not empty
- * sign 0 by paren==0
- * paren 0 by "()" scan logic because "S^" seen
- * reg -1 or nn by mistake
- * ndx -1
- *
- * out: mode 0
- * reg -1
- * len 's'
- * exp
- * ndx -1
- */
- if (!*err && len == 's')
+#endif
+
+ /* Case of S^#.
+
+ in: at 0
+ len 's' definition
+ hash 1 demand
+ p:q demand not empty
+ sign 0 by paren==0
+ paren 0 by "()" scan logic because "S^" seen
+ reg -1 or nn by mistake
+ ndx -1
+
+ out: mode 0
+ reg -1
+ len 's'
+ exp
+ ndx -1 */
+ if ((!err || !*err) && len == 's')
{
if (!hash || paren || at || ndx >= 0)
- err = "invalid operand of S^#";
+ err = _("invalid operand of S^#");
else
{
if (reg >= 0)
{
- /*
- * SHIT! we saw S^#Rnn ! put the Rnn back in
- * expression. KLUDGE! Use oldq so we don't
- * need to know exact length of reg name.
- */
+ /* Darn! we saw S^#Rnn ! put the Rnn back in
+ expression. KLUDGE! Use oldq so we don't
+ need to know exact length of reg name. */
q = oldq;
reg = 0;
}
- /*
- * We have all the expression we will ever get.
- */
+ /* We have all the expression we will ever get. */
if (p > q)
- err = "S^# needs expression";
- else if (access == 'r')
+ err = _("S^# needs expression");
+ else if (access_mode == 'r')
{
err = " "; /* WIN! */
mode = 0;
}
else
- err = "S^# may only read-access";
+ err = _("S^# may only read-access");
}
}
-\f
- /*
- * Case of -(Rn), which is weird case.
- *
- * in: at 0
- * len '
- * hash 0
- * p:q q<p
- * sign -1 by definition
- * paren 1 by definition
- * reg present by definition
- * ndx optional
- *
- * out: mode 7
- * reg present
- * len ' '
- * exp "" enforce empty expression
- * ndx optional warn if same as reg
- */
- if (!*err && sign < 0)
+
+ /* Case of -(Rn), which is weird case.
+
+ in: at 0
+ len '
+ hash 0
+ p:q q<p
+ sign -1 by definition
+ paren 1 by definition
+ reg present by definition
+ ndx optional
+
+ out: mode 7
+ reg present
+ len ' '
+ exp "" enforce empty expression
+ ndx optional warn if same as reg. */
+ if ((!err || !*err) && sign < 0)
{
if (len != ' ' || hash || at || p <= q)
- err = "invalid operand of -()";
+ err = _("invalid operand of -()");
else
{
err = " "; /* win */
mode = 7;
if (reg == PC)
- wrn = "-(PC) unpredictable";
+ wrn = _("-(PC) unpredictable");
else if (reg == ndx)
- wrn = "[]index same as -()register: unpredictable";
+ wrn = _("[]index same as -()register: unpredictable");
}
}
-\f
- /*
- * We convert "(Rn)" to "@Rn" for our convenience.
- * (I hope this is convenient: has someone got a better way to parse this?)
- * A side-effect of this is that "@Rn" is a valid operand.
- */
+
+ /* We convert "(Rn)" to "@Rn" for our convenience.
+ (I hope this is convenient: has someone got a better way to parse this?)
+ A side-effect of this is that "@Rn" is a valid operand. */
if (paren && !sign && !hash && !at && len == ' ' && p > q)
{
at = 1;
paren = 0;
}
- /*
- * Case of (Rn)+, which is slightly different.
- *
- * in: at
- * len ' '
- * hash 0
- * p:q q<p
- * sign +1 by definition
- * paren 1 by definition
- * reg present by definition
- * ndx optional
- *
- * out: mode 8+@
- * reg present
- * len ' '
- * exp "" enforce empty expression
- * ndx optional warn if same as reg
- */
- if (!*err && sign > 0)
+ /* Case of (Rn)+, which is slightly different.
+
+ in: at
+ len ' '
+ hash 0
+ p:q q<p
+ sign +1 by definition
+ paren 1 by definition
+ reg present by definition
+ ndx optional
+
+ out: mode 8+@
+ reg present
+ len ' '
+ exp "" enforce empty expression
+ ndx optional warn if same as reg. */
+ if ((!err || !*err) && sign > 0)
{
if (len != ' ' || hash || p <= q)
- err = "invalid operand of ()+";
+ err = _("invalid operand of ()+");
else
{
err = " "; /* win */
mode = 8 + (at ? 1 : 0);
if (reg == PC)
- wrn = "(PC)+ unpredictable";
+ wrn = _("(PC)+ unpredictable");
else if (reg == ndx)
- wrn = "[]index same as ()+register: unpredictable";
+ wrn = _("[]index same as ()+register: unpredictable");
}
}
-\f
- /*
- * Case of #, without S^.
- *
- * in: at
- * len ' ' or 'i'
- * hash 1 by definition
- * p:q
- * sign 0
- * paren 0
- * reg absent
- * ndx optional
- *
- * out: mode 8+@
- * reg PC
- * len ' ' or 'i'
- * exp
- * ndx optional
- */
- if (!*err && hash)
+
+ /* Case of #, without S^.
+
+ in: at
+ len ' ' or 'i'
+ hash 1 by definition
+ p:q
+ sign 0
+ paren 0
+ reg absent
+ ndx optional
+
+ out: mode 8+@
+ reg PC
+ len ' ' or 'i'
+ exp
+ ndx optional. */
+ if ((!err || !*err) && hash)
{
if (len != 'i' && len != ' ')
- err = "# conflicts length";
+ err = _("# conflicts length");
else if (paren)
- err = "# bars register";
+ err = _("# bars register");
else
{
if (reg >= 0)
{
- /*
- * SHIT! we saw #Rnn! Put the Rnn back into the expression.
- * By using oldq, we don't need to know how long Rnn was.
- * KLUDGE!
- */
+ /* Darn! we saw #Rnn! Put the Rnn back into the expression.
+ By using oldq, we don't need to know how long Rnn was.
+ KLUDGE! */
q = oldq;
- reg = -1; /* no register any more */
+ reg = -1; /* No register any more. */
}
- err = " "; /* win */
+ err = " "; /* Win. */
- /* JF a bugfix, I think! */
- if (at && access == 'a')
+ /* JF a bugfix, I think! */
+ if (at && access_mode == 'a')
vopP->vop_nbytes = 4;
mode = (at ? 9 : 8);
reg = PC;
- if ((access == 'm' || access == 'w') && !at)
- wrn = "writing or modifying # is unpredictable";
+ if ((access_mode == 'm' || access_mode == 'w') && !at)
+ wrn = _("writing or modifying # is unpredictable");
}
}
- /*
- * If !*err, then sign == 0
- * hash == 0
- */
-\f
- /*
- * Case of Rn. We seperate this one because it has a few special
- * errors the remaining modes lack.
- *
- * in: at optional
- * len ' '
- * hash 0 by program logic
- * p:q empty
- * sign 0 by program logic
- * paren 0 by definition
- * reg present by definition
- * ndx optional
- *
- * out: mode 5+@
- * reg present
- * len ' ' enforce no length
- * exp "" enforce empty expression
- * ndx optional warn if same as reg
- */
- if (!*err && !paren && reg >= 0)
+ /* If !*err, then sign == 0
+ hash == 0 */
+
+ /* Case of Rn. We separate this one because it has a few special
+ errors the remaining modes lack.
+
+ in: at optional
+ len ' '
+ hash 0 by program logic
+ p:q empty
+ sign 0 by program logic
+ paren 0 by definition
+ reg present by definition
+ ndx optional
+
+ out: mode 5+@
+ reg present
+ len ' ' enforce no length
+ exp "" enforce empty expression
+ ndx optional warn if same as reg. */
+ if ((!err || !*err) && !paren && reg >= 0)
{
if (len != ' ')
- err = "length not needed";
+ err = _("length not needed");
else if (at)
{
err = " "; /* win */
mode = 6; /* @Rn */
}
else if (ndx >= 0)
- err = "can't []index a register, because it has no address";
- else if (access == 'a')
- err = "a register has no address";
+ err = _("can't []index a register, because it has no address");
+ else if (access_mode == 'a')
+ err = _("a register has no address");
else
{
- /*
- * Idea here is to detect from length of datum
- * and from register number if we will touch PC.
- * Warn if we do.
- * vop_nbytes is number of bytes in operand.
- * Compute highest byte affected, compare to PC0.
- */
+ /* Idea here is to detect from length of datum
+ and from register number if we will touch PC.
+ Warn if we do.
+ vop_nbytes is number of bytes in operand.
+ Compute highest byte affected, compare to PC0. */
if ((vopP->vop_nbytes + reg * 4) > 60)
- wrn = "PC part of operand unpredictable";
+ wrn = _("PC part of operand unpredictable");
err = " "; /* win */
mode = 5; /* Rn */
}
}
- /*
- * If !*err, sign == 0
- * hash == 0
- * paren == 1 OR reg==-1
- */
-\f
- /*
- * Rest of cases fit into one bunch.
- *
- * in: at optional
- * len ' ' or 'b' or 'w' or 'l'
- * hash 0 by program logic
- * p:q expected (empty is not an error)
- * sign 0 by program logic
- * paren optional
- * reg optional
- * ndx optional
- *
- * out: mode 10 + @ + len
- * reg optional
- * len ' ' or 'b' or 'w' or 'l'
- * exp maybe empty
- * ndx optional warn if same as reg
- */
- if (!*err)
+ /* If !*err, sign == 0
+ hash == 0
+ paren == 1 OR reg==-1 */
+
+ /* Rest of cases fit into one bunch.
+
+ in: at optional
+ len ' ' or 'b' or 'w' or 'l'
+ hash 0 by program logic
+ p:q expected (empty is not an error)
+ sign 0 by program logic
+ paren optional
+ reg optional
+ ndx optional
+
+ out: mode 10 + @ + len
+ reg optional
+ len ' ' or 'b' or 'w' or 'l'
+ exp maybe empty
+ ndx optional warn if same as reg. */
+ if (!err || !*err)
{
err = " "; /* win (always) */
mode = 10 + (at ? 1 : 0);
mode += 2;
case 'w':
mode += 2;
- case ' ': /* assumed B^ until our caller changes it */
+ case ' ': /* Assumed B^ until our caller changes it. */
case 'b':
break;
}
}
- /*
- * here with completely specified mode
- * len
- * reg
- * expression p,q
- * ndx
- */
+ /* here with completely specified mode
+ len
+ reg
+ expression p,q
+ ndx. */
if (*err == ' ')
- err = ""; /* " " is no longer an error */
+ err = 0; /* " " is no longer an error. */
vopP->vop_mode = mode;
vopP->vop_reg = reg;
vopP->vop_ndx = ndx;
vopP->vop_error = err;
vopP->vop_warn = wrn;
- return (bug);
+}
+
+/* This converts a string into a vax instruction.
+ The string must be a bare single instruction in dec-vax (with BSD4 frobs)
+ format.
+ It provides some error messages: at most one fatal error message (which
+ stops the scan) and at most one warning message for each operand.
+ The vax instruction is returned in exploded form, since we have no
+ knowledge of how you parse (or evaluate) your expressions.
+ We do however strip off and decode addressing modes and operation
+ mnemonic.
+
+ The exploded instruction is returned to a struct vit of your choice.
+ #include "vax-inst.h" to know what a struct vit is.
+
+ This function's value is a string. If it is not "" then an internal
+ logic error was found: read this code to assign meaning to the string.
+ No argument string should generate such an error string:
+ it means a bug in our code, not in the user's text.
+
+ You MUST have called vip_begin() once before using this function. */
+
+static void
+vip (struct vit *vitP, /* We build an exploded instruction here. */
+ char *instring) /* Text of a vax instruction: we modify. */
+{
+ /* How to bit-encode this opcode. */
+ struct vot_wot *vwP;
+ /* 1/skip whitespace.2/scan vot_how */
+ char *p;
+ char *q;
+ /* counts number of operands seen */
+ unsigned char count;
+ /* scan operands in struct vit */
+ struct vop *operandp;
+ /* error over all operands */
+ const char *alloperr;
+ /* Remember char, (we clobber it with '\0' temporarily). */
+ char c;
+ /* Op-code of this instruction. */
+ vax_opcodeT oc;
+
+ if (*instring == ' ')
+ ++instring;
+
+ /* MUST end in end-of-string or exactly 1 space. */
+ for (p = instring; *p && *p != ' '; p++)
+ ;
+
+ /* Scanned up to end of operation-code. */
+ /* Operation-code is ended with whitespace. */
+ if (p - instring == 0)
+ {
+ vitP->vit_error = _("No operator");
+ count = 0;
+ memset (vitP->vit_opcode, '\0', sizeof (vitP->vit_opcode));
+ }
+ else
+ {
+ c = *p;
+ *p = '\0';
+ /* Here with instring pointing to what better be an op-name, and p
+ pointing to character just past that.
+ We trust instring points to an op-name, with no whitespace. */
+ vwP = (struct vot_wot *) hash_find (op_hash, instring);
+ /* Restore char after op-code. */
+ *p = c;
+ if (vwP == 0)
+ {
+ vitP->vit_error = _("Unknown operator");
+ count = 0;
+ memset (vitP->vit_opcode, '\0', sizeof (vitP->vit_opcode));
+ }
+ else
+ {
+ /* We found a match! So let's pick up as many operands as the
+ instruction wants, and even gripe if there are too many.
+ We expect comma to separate each operand.
+ We let instring track the text, while p tracks a part of the
+ struct vot. */
+ const char *howp;
+ /* The lines below know about 2-byte opcodes starting FD,FE or FF.
+ They also understand synthetic opcodes. Note:
+ we return 32 bits of opcode, including bucky bits, BUT
+ an opcode length is either 8 or 16 bits for vit_opcode_nbytes. */
+ oc = vwP->vot_code; /* The op-code. */
+ vitP->vit_opcode_nbytes = (oc & 0xFF) >= 0xFD ? 2 : 1;
+ md_number_to_chars (vitP->vit_opcode, oc, 4);
+ count = 0; /* No operands seen yet. */
+ instring = p; /* Point just past operation code. */
+ alloperr = "";
+ for (howp = vwP->vot_how, operandp = vitP->vit_operand;
+ !(alloperr && *alloperr) && *howp;
+ operandp++, howp += 2)
+ {
+ /* Here to parse one operand. Leave instring pointing just
+ past any one ',' that marks the end of this operand. */
+ if (!howp[1])
+ as_fatal (_("odd number of bytes in operand description"));
+ else if (*instring)
+ {
+ for (q = instring; (c = *q) && c != ','; q++)
+ ;
+ /* Q points to ',' or '\0' that ends argument. C is that
+ character. */
+ *q = 0;
+ operandp->vop_width = howp[1];
+ operandp->vop_nbytes = vax_operand_width_size[(unsigned) howp[1]];
+ operandp->vop_access = howp[0];
+ vip_op (instring, operandp);
+ *q = c; /* Restore input text. */
+ if (operandp->vop_error)
+ alloperr = _("Bad operand");
+ instring = q + (c ? 1 : 0); /* Next operand (if any). */
+ count++; /* Won another argument, may have an operr. */
+ }
+ else
+ alloperr = _("Not enough operands");
+ }
+ if (!*alloperr)
+ {
+ if (*instring == ' ')
+ instring++;
+ if (*instring)
+ alloperr = _("Too many operands");
+ }
+ vitP->vit_error = alloperr;
+ }
+ }
+ vitP->vit_operands = count;
+}
+\f
+#ifdef test
+
+/* Test program for above. */
+
+struct vit myvit; /* Build an exploded vax instruction here. */
+char answer[100]; /* Human types a line of vax assembler here. */
+char *mybug; /* "" or an internal logic diagnostic. */
+int mycount; /* Number of operands. */
+struct vop *myvop; /* Scan operands from myvit. */
+int mysynth; /* 1 means want synthetic opcodes. */
+char my_immediate[200];
+char my_indirect[200];
+char my_displen[200];
+
+int
+main (void)
+{
+ char *p;
+
+ printf ("0 means no synthetic instructions. ");
+ printf ("Value for vip_begin? ");
+ gets (answer);
+ sscanf (answer, "%d", &mysynth);
+ printf ("Synthetic opcodes %s be included.\n", mysynth ? "will" : "will not");
+ printf ("enter immediate symbols eg enter # ");
+ gets (my_immediate);
+ printf ("enter indirect symbols eg enter @ ");
+ gets (my_indirect);
+ printf ("enter displen symbols eg enter ^ ");
+ gets (my_displen);
+
+ if (p = vip_begin (mysynth, my_immediate, my_indirect, my_displen))
+ error ("vip_begin=%s", p);
+
+ printf ("An empty input line will quit you from the vax instruction parser\n");
+ for (;;)
+ {
+ printf ("vax instruction: ");
+ fflush (stdout);
+ gets (answer);
+ if (!*answer)
+ break; /* Out of for each input text loop. */
-} /* vip_op() */
-\f
-/*
+ vip (& myvit, answer);
+ if (*myvit.vit_error)
+ printf ("ERR:\"%s\"\n", myvit.vit_error);
- Summary of vip_op outputs.
+ printf ("opcode=");
+ for (mycount = myvit.vit_opcode_nbytes, p = myvit.vit_opcode;
+ mycount;
+ mycount--, p++)
+ printf ("%02x ", *p & 0xFF);
- mode reg len ndx
- (Rn) => @Rn
- {@}Rn 5+@ n ' ' optional
- branch operand 0 -1 ' ' -1
- S^#foo 0 -1 's' -1
- -(Rn) 7 n ' ' optional
- {@}(Rn)+ 8+@ n ' ' optional
- {@}#foo, no S^ 8+@ PC " i" optional
- {@}{q^}{(Rn)} 10+@+q option " bwl" optional
+ printf (" operand count=%d.\n", mycount = myvit.vit_operands);
+ for (myvop = myvit.vit_operand; mycount; mycount--, myvop++)
+ {
+ printf ("mode=%xx reg=%xx ndx=%xx len='%c'=%c%c%d. expr=\"",
+ myvop->vop_mode, myvop->vop_reg, myvop->vop_ndx,
+ myvop->vop_short, myvop->vop_access, myvop->vop_width,
+ myvop->vop_nbytes);
+ for (p = myvop->vop_expr_begin; p <= myvop->vop_expr_end; p++)
+ putchar (*p);
- */
+ printf ("\"\n");
+ if (myvop->vop_error)
+ printf (" err:\"%s\"\n", myvop->vop_error);
+
+ if (myvop->vop_warn)
+ printf (" wrn:\"%s\"\n", myvop->vop_warn);
+ }
+ }
+ vip_end ();
+ exit (EXIT_SUCCESS);
+}
+
+#endif
\f
-#ifdef TEST /* #Define to use this testbed. */
+#ifdef TEST /* #Define to use this testbed. */
-/*
- * Follows a test program for this function.
- * We declare arrays non-local in case some of our tiny-minded machines
- * default to small stacks. Also, helps with some debuggers.
- */
+/* Follows a test program for this function.
+ We declare arrays non-local in case some of our tiny-minded machines
+ default to small stacks. Also, helps with some debuggers. */
#include <stdio.h>
-char answer[100]; /* human types into here */
+char answer[100]; /* Human types into here. */
char *p; /* */
char *myerr;
char *mywrn;
char my_indirect[200];
char my_displen[200];
-main ()
+int
+main (void)
{
- char *vip_op (); /* make cc happy */
-
printf ("enter immediate symbols eg enter # ");
gets (my_immediate);
printf ("enter indirect symbols eg enter @ ");
printf ("enter displen symbols eg enter ^ ");
gets (my_displen);
vip_op_defaults (my_immediate, my_indirect, my_displen);
+
for (;;)
{
printf ("access,width (eg 'ab' or 'wh') [empty line to quit] : ");
fflush (stdout);
gets (answer);
if (!answer[0])
- exit (0);
+ exit (EXIT_SUCCESS);
myaccess = answer[0];
mywidth = answer[1];
switch (mywidth)
}
}
-mumble (text, value)
- char *text;
- int value;
+void
+mumble (char *text, int value)
{
printf ("%s:", text);
if (value >= 0)
printf (" ");
}
-#endif /* ifdef TEST */
+#endif
+
+int md_short_jump_size = 3;
+int md_long_jump_size = 6;
+
+void
+md_create_short_jump (char *ptr,
+ addressT from_addr,
+ addressT to_addr ATTRIBUTE_UNUSED,
+ fragS *frag ATTRIBUTE_UNUSED,
+ symbolS *to_symbol ATTRIBUTE_UNUSED)
+{
+ valueT offset;
+
+ /* This former calculation was off by two:
+ offset = to_addr - (from_addr + 1);
+ We need to account for the one byte instruction and also its
+ two byte operand. */
+ offset = to_addr - (from_addr + 1 + 2);
+ *ptr++ = VAX_BRW; /* Branch with word (16 bit) offset. */
+ md_number_to_chars (ptr, offset, 2);
+}
+
+void
+md_create_long_jump (char *ptr,
+ addressT from_addr ATTRIBUTE_UNUSED,
+ addressT to_addr,
+ fragS *frag,
+ symbolS *to_symbol)
+{
+ valueT offset;
+
+ offset = to_addr - S_GET_VALUE (to_symbol);
+ *ptr++ = VAX_JMP; /* Arbitrary jump. */
+ *ptr++ = VAX_ABSOLUTE_MODE;
+ md_number_to_chars (ptr, offset, 4);
+ fix_new (frag, ptr - frag->fr_literal, 4, to_symbol, (long) 0, 0, NO_RELOC);
+}
+\f
+#ifdef OBJ_VMS
+const char *md_shortopts = "d:STt:V+1h:Hv::";
+#elif defined(OBJ_ELF)
+const char *md_shortopts = "d:STt:VkKQ:";
+#else
+const char *md_shortopts = "d:STt:V";
+#endif
+struct option md_longopts[] =
+{
+#ifdef OBJ_ELF
+#define OPTION_PIC (OPTION_MD_BASE)
+ { "pic", no_argument, NULL, OPTION_PIC },
+#endif
+ { NULL, no_argument, NULL, 0 }
+};
+size_t md_longopts_size = sizeof (md_longopts);
+
+int
+md_parse_option (int c, char *arg)
+{
+ switch (c)
+ {
+ case 'S':
+ as_warn (_("SYMBOL TABLE not implemented"));
+ break;
+
+ case 'T':
+ as_warn (_("TOKEN TRACE not implemented"));
+ break;
+
+ case 'd':
+ as_warn (_("Displacement length %s ignored!"), arg);
+ break;
+
+ case 't':
+ as_warn (_("I don't need or use temp. file \"%s\"."), arg);
+ break;
+
+ case 'V':
+ as_warn (_("I don't use an interpass file! -V ignored"));
+ break;
+
+#ifdef OBJ_VMS
+ case '+': /* For g++. Hash any name > 31 chars long. */
+ flag_hash_long_names = 1;
+ break;
+
+ case '1': /* For backward compatibility. */
+ flag_one = 1;
+ break;
+
+ case 'H': /* Show new symbol after hash truncation. */
+ flag_show_after_trunc = 1;
+ break;
+
+ case 'h': /* No hashing of mixed-case names. */
+ {
+ extern char vms_name_mapping;
+ vms_name_mapping = atoi (arg);
+ flag_no_hash_mixed_case = 1;
+ }
+ break;
+
+ case 'v':
+ {
+ extern char *compiler_version_string;
+
+ if (!arg || !*arg || access (arg, 0) == 0)
+ return 0; /* Have caller show the assembler version. */
+ compiler_version_string = arg;
+ }
+ break;
+#endif
+
+#ifdef OBJ_ELF
+ case OPTION_PIC:
+ case 'k':
+ flag_want_pic = 1;
+ break; /* -pic, Position Independent Code. */
+
+ /* -Qy, -Qn: SVR4 arguments controlling whether a .comment
+ section should be emitted or not. FIXME: Not implemented. */
+ case 'Q':
+ break;
+#endif
+
+ default:
+ return 0;
+ }
+
+ return 1;
+}
+
+void
+md_show_usage (FILE *stream)
+{
+ fprintf (stream, _("\
+VAX options:\n\
+-d LENGTH ignored\n\
+-J ignored\n\
+-S ignored\n\
+-t FILE ignored\n\
+-T ignored\n\
+-V ignored\n"));
+#ifdef OBJ_VMS
+ fprintf (stream, _("\
+VMS options:\n\
+-+ hash encode names longer than 31 characters\n\
+-1 `const' handling compatible with gcc 1.x\n\
+-H show new symbol after hash truncation\n\
+-h NUM don't hash mixed-case names, and adjust case:\n\
+ 0 = upper, 2 = lower, 3 = preserve case\n\
+-v\"VERSION\" code being assembled was produced by compiler \"VERSION\"\n"));
+#endif
+}
+\f
+/* We have no need to default values of symbols. */
+
+symbolS *
+md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
+{
+ return NULL;
+}
+
+/* Round up a section size to the appropriate boundary. */
+valueT
+md_section_align (segT segment ATTRIBUTE_UNUSED, valueT size)
+{
+ /* Byte alignment is fine */
+ return size;
+}
+
+/* Exactly what point is a PC-relative offset relative TO?
+ On the vax, they're relative to the address of the offset, plus
+ its size. */
+long
+md_pcrel_from (fixS *fixP)
+{
+ return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
+}
+
+arelent *
+tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp)
+{
+ arelent *reloc;
+ bfd_reloc_code_real_type code;
+
+ if (fixp->fx_tcbit)
+ abort ();
+
+ if (fixp->fx_r_type != BFD_RELOC_NONE)
+ {
+ code = fixp->fx_r_type;
+
+ if (fixp->fx_pcrel)
+ {
+ switch (code)
+ {
+ case BFD_RELOC_8_PCREL:
+ case BFD_RELOC_16_PCREL:
+ case BFD_RELOC_32_PCREL:
+#ifdef OBJ_ELF
+ case BFD_RELOC_8_GOT_PCREL:
+ case BFD_RELOC_16_GOT_PCREL:
+ case BFD_RELOC_32_GOT_PCREL:
+ case BFD_RELOC_8_PLT_PCREL:
+ case BFD_RELOC_16_PLT_PCREL:
+ case BFD_RELOC_32_PLT_PCREL:
+#endif
+ break;
+ default:
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("Cannot make %s relocation PC relative"),
+ bfd_get_reloc_code_name (code));
+ }
+ }
+ }
+ else
+ {
+#define F(SZ,PCREL) (((SZ) << 1) + (PCREL))
+ switch (F (fixp->fx_size, fixp->fx_pcrel))
+ {
+#define MAP(SZ,PCREL,TYPE) case F(SZ,PCREL): code = (TYPE); break
+ MAP (1, 0, BFD_RELOC_8);
+ MAP (2, 0, BFD_RELOC_16);
+ MAP (4, 0, BFD_RELOC_32);
+ MAP (1, 1, BFD_RELOC_8_PCREL);
+ MAP (2, 1, BFD_RELOC_16_PCREL);
+ MAP (4, 1, BFD_RELOC_32_PCREL);
+ default:
+ abort ();
+ }
+ }
+#undef F
+#undef MAP
+
+ reloc = xmalloc (sizeof (arelent));
+ reloc->sym_ptr_ptr = xmalloc (sizeof (asymbol *));
+ *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
+ reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
+#ifndef OBJ_ELF
+ if (fixp->fx_pcrel)
+ reloc->addend = fixp->fx_addnumber;
+ else
+ reloc->addend = 0;
+#else
+ reloc->addend = fixp->fx_offset;
+#endif
+
+ reloc->howto = bfd_reloc_type_lookup (stdoutput, code);
+ assert (reloc->howto != 0);
+
+ return reloc;
+}
+
+/* vax:md_assemble() emit frags for 1 instruction given in textual form. */
+void
+md_assemble (char *instruction_string)
+{
+ /* Non-zero if operand expression's segment is not known yet. */
+ int is_undefined;
+ /* Non-zero if operand expression's segment is absolute. */
+ int is_absolute;
+ int length_code;
+ char *p;
+ /* An operand. Scans all operands. */
+ struct vop *operandP;
+ char *save_input_line_pointer;
+ /* What used to live after an expression. */
+ char c_save;
+ /* 1: instruction_string bad for all passes. */
+ int goofed;
+ /* Points to slot just after last operand. */
+ struct vop *end_operandP;
+ /* Points to expression values for this operand. */
+ expressionS *expP;
+ segT *segP;
+
+ /* These refer to an instruction operand expression. */
+ /* Target segment of the address. */
+ segT to_seg;
+ valueT this_add_number;
+ /* Positive (minuend) symbol. */
+ symbolS *this_add_symbol;
+ /* As a number. */
+ long opcode_as_number;
+ /* Least significant byte 1st. */
+ char *opcode_as_chars;
+ /* As an array of characters. */
+ /* Least significant byte 1st */
+ char *opcode_low_byteP;
+ /* length (bytes) meant by vop_short. */
+ int length;
+ /* 0, or 1 if '@' is in addressing mode. */
+ int at;
+ /* From vop_nbytes: vax_operand_width (in bytes) */
+ int nbytes;
+ FLONUM_TYPE *floatP;
+ LITTLENUM_TYPE literal_float[8];
+ /* Big enough for any floating point literal. */
+
+ vip (&v, instruction_string);
+
+ /* Now we try to find as many as_warn()s as we can. If we do any as_warn()s
+ then goofed=1. Notice that we don't make any frags yet.
+ Should goofed be 1, then this instruction will wedge in any pass,
+ and we can safely flush it, without causing interpass symbol phase
+ errors. That is, without changing label values in different passes. */
+ if ((goofed = (*v.vit_error)) != 0)
+ {
+ as_fatal (_("Ignoring statement due to \"%s\""), v.vit_error);
+ }
+ /* We need to use expression() and friends, which require us to diddle
+ input_line_pointer. So we save it and restore it later. */
+ save_input_line_pointer = input_line_pointer;
+ for (operandP = v.vit_operand,
+ expP = exp_of_operand,
+ segP = seg_of_operand,
+ floatP = float_operand,
+ end_operandP = v.vit_operand + v.vit_operands;
+
+ operandP < end_operandP;
+
+ operandP++, expP++, segP++, floatP++)
+ {
+ if (operandP->vop_error)
+ {
+ as_fatal (_("Aborting because statement has \"%s\""), operandP->vop_error);
+ goofed = 1;
+ }
+ else
+ {
+ /* Statement has no syntax goofs: let's sniff the expression. */
+ int can_be_short = 0; /* 1 if a bignum can be reduced to a short literal. */
+
+ input_line_pointer = operandP->vop_expr_begin;
+ c_save = operandP->vop_expr_end[1];
+ operandP->vop_expr_end[1] = '\0';
+ /* If to_seg == SEG_PASS1, expression() will have set need_pass_2 = 1. */
+ *segP = expression (expP);
+ switch (expP->X_op)
+ {
+ case O_absent:
+ /* for BSD4.2 compatibility, missing expression is absolute 0 */
+ expP->X_op = O_constant;
+ expP->X_add_number = 0;
+ /* For SEG_ABSOLUTE, we shouldn't need to set X_op_symbol,
+ X_add_symbol to any particular value. But, we will program
+ defensively. Since this situation occurs rarely so it costs
+ us little to do, and stops Dean worrying about the origin of
+ random bits in expressionS's. */
+ expP->X_add_symbol = NULL;
+ expP->X_op_symbol = NULL;
+ break;
+
+ case O_symbol:
+ case O_constant:
+ break;
+
+ default:
+ /* Major bug. We can't handle the case of a
+ SEG_OP expression in a VIT_OPCODE_SYNTHETIC
+ variable-length instruction.
+ We don't have a frag type that is smart enough to
+ relax a SEG_OP, and so we just force all
+ SEG_OPs to behave like SEG_PASS1s.
+ Clearly, if there is a demand we can invent a new or
+ modified frag type and then coding up a frag for this
+ case will be easy. SEG_OP was invented for the
+ .words after a CASE opcode, and was never intended for
+ instruction operands. */
+ need_pass_2 = 1;
+ as_fatal (_("Can't relocate expression"));
+ break;
+
+ case O_big:
+ /* Preserve the bits. */
+ if (expP->X_add_number > 0)
+ {
+ bignum_copy (generic_bignum, expP->X_add_number,
+ floatP->low, SIZE_OF_LARGE_NUMBER);
+ }
+ else
+ {
+ know (expP->X_add_number < 0);
+ flonum_copy (&generic_floating_point_number,
+ floatP);
+ if (strchr ("s i", operandP->vop_short))
+ {
+ /* Could possibly become S^# */
+ flonum_gen2vax (-expP->X_add_number, floatP, literal_float);
+ switch (-expP->X_add_number)
+ {
+ case 'f':
+ can_be_short =
+ (literal_float[0] & 0xFC0F) == 0x4000
+ && literal_float[1] == 0;
+ break;
+
+ case 'd':
+ can_be_short =
+ (literal_float[0] & 0xFC0F) == 0x4000
+ && literal_float[1] == 0
+ && literal_float[2] == 0
+ && literal_float[3] == 0;
+ break;
+
+ case 'g':
+ can_be_short =
+ (literal_float[0] & 0xFF81) == 0x4000
+ && literal_float[1] == 0
+ && literal_float[2] == 0
+ && literal_float[3] == 0;
+ break;
+
+ case 'h':
+ can_be_short = ((literal_float[0] & 0xFFF8) == 0x4000
+ && (literal_float[1] & 0xE000) == 0
+ && literal_float[2] == 0
+ && literal_float[3] == 0
+ && literal_float[4] == 0
+ && literal_float[5] == 0
+ && literal_float[6] == 0
+ && literal_float[7] == 0);
+ break;
+
+ default:
+ BAD_CASE (-expP->X_add_number);
+ break;
+ }
+ }
+ }
+
+ if (operandP->vop_short == 's'
+ || operandP->vop_short == 'i'
+ || (operandP->vop_short == ' '
+ && operandP->vop_reg == 0xF
+ && (operandP->vop_mode & 0xE) == 0x8))
+ {
+ /* Saw a '#'. */
+ if (operandP->vop_short == ' ')
+ {
+ /* We must chose S^ or I^. */
+ if (expP->X_add_number > 0)
+ {
+ /* Bignum: Short literal impossible. */
+ operandP->vop_short = 'i';
+ operandP->vop_mode = 8;
+ operandP->vop_reg = 0xF; /* VAX PC. */
+ }
+ else
+ {
+ /* Flonum: Try to do it. */
+ if (can_be_short)
+ {
+ operandP->vop_short = 's';
+ operandP->vop_mode = 0;
+ operandP->vop_ndx = -1;
+ operandP->vop_reg = -1;
+ expP->X_op = O_constant;
+ }
+ else
+ {
+ operandP->vop_short = 'i';
+ operandP->vop_mode = 8;
+ operandP->vop_reg = 0xF; /* VAX PC */
+ }
+ } /* bignum or flonum ? */
+ } /* if #, but no S^ or I^ seen. */
+ /* No more ' ' case: either 's' or 'i'. */
+ if (operandP->vop_short == 's')
+ {
+ /* Wants to be a short literal. */
+ if (expP->X_add_number > 0)
+ {
+ as_warn (_("Bignum not permitted in short literal. Immediate mode assumed."));
+ operandP->vop_short = 'i';
+ operandP->vop_mode = 8;
+ operandP->vop_reg = 0xF; /* VAX PC. */
+ }
+ else
+ {
+ if (!can_be_short)
+ {
+ as_warn (_("Can't do flonum short literal: immediate mode used."));
+ operandP->vop_short = 'i';
+ operandP->vop_mode = 8;
+ operandP->vop_reg = 0xF; /* VAX PC. */
+ }
+ else
+ {
+ /* Encode short literal now. */
+ int temp = 0;
+
+ switch (-expP->X_add_number)
+ {
+ case 'f':
+ case 'd':
+ temp = literal_float[0] >> 4;
+ break;
-/* end: vip_op.c */
+ case 'g':
+ temp = literal_float[0] >> 1;
+ break;
-const int md_short_jump_size = 3;
-const int md_long_jump_size = 6;
-const int md_reloc_size = 8; /* Size of relocation record */
+ case 'h':
+ temp = ((literal_float[0] << 3) & 070)
+ | ((literal_float[1] >> 13) & 07);
+ break;
-void
-md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- long from_addr, to_addr;
- fragS *frag;
- symbolS *to_symbol;
-{
- long offset;
+ default:
+ BAD_CASE (-expP->X_add_number);
+ break;
+ }
- offset = to_addr - (from_addr + 1);
- *ptr++ = 0x31;
- md_number_to_chars (ptr, offset, 2);
-}
+ floatP->low[0] = temp & 077;
+ floatP->low[1] = 0;
+ }
+ }
+ }
+ else
+ {
+ /* I^# seen: set it up if float. */
+ if (expP->X_add_number < 0)
+ {
+ memcpy (floatP->low, literal_float, sizeof (literal_float));
+ }
+ } /* if S^# seen. */
+ }
+ else
+ {
+ as_warn (_("A bignum/flonum may not be a displacement: 0x%lx used"),
+ (expP->X_add_number = 0x80000000L));
+ /* Chosen so luser gets the most offset bits to patch later. */
+ }
+ expP->X_add_number = floatP->low[0]
+ | ((LITTLENUM_MASK & (floatP->low[1])) << LITTLENUM_NUMBER_OF_BITS);
-void
-md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- long from_addr, to_addr;
- fragS *frag;
- symbolS *to_symbol;
-{
- long offset;
+ /* For the O_big case we have:
+ If vop_short == 's' then a short floating literal is in the
+ lowest 6 bits of floatP -> low [0], which is
+ big_operand_bits [---] [0].
+ If vop_short == 'i' then the appropriate number of elements
+ of big_operand_bits [---] [...] are set up with the correct
+ bits.
+ Also, just in case width is byte word or long, we copy the lowest
+ 32 bits of the number to X_add_number. */
+ break;
+ }
+ if (input_line_pointer != operandP->vop_expr_end + 1)
+ {
+ as_fatal ("Junk at end of expression \"%s\"", input_line_pointer);
+ goofed = 1;
+ }
+ operandP->vop_expr_end[1] = c_save;
+ }
+ }
- offset = to_addr - S_GET_VALUE (to_symbol);
- *ptr++ = 0x17;
- *ptr++ = 0x9F;
- md_number_to_chars (ptr, offset, 4);
- fix_new (frag, ptr - frag->fr_literal, 4, to_symbol, (symbolS *) 0, (long) 0, 0, NO_RELOC);
-}
+ input_line_pointer = save_input_line_pointer;
-int
-md_parse_option (argP, cntP, vecP)
- char **argP;
- int *cntP;
- char ***vecP;
-{
- char *temp_name; /* name for -t or -d options */
- char opt;
+ if (need_pass_2 || goofed)
+ return;
- switch (**argP)
- {
- case 'J':
- /* as_warn ("I can do better than -J!"); */
- break;
+ /* Emit op-code. */
+ /* Remember where it is, in case we want to modify the op-code later. */
+ opcode_low_byteP = frag_more (v.vit_opcode_nbytes);
+ memcpy (opcode_low_byteP, v.vit_opcode, v.vit_opcode_nbytes);
+ opcode_as_chars = v.vit_opcode;
+ opcode_as_number = md_chars_to_number ((unsigned char *) opcode_as_chars, 4);
+ for (operandP = v.vit_operand,
+ expP = exp_of_operand,
+ segP = seg_of_operand,
+ floatP = float_operand,
+ end_operandP = v.vit_operand + v.vit_operands;
- case 'S':
- as_warn ("SYMBOL TABLE not implemented");
- break; /* SYMBOL TABLE not implemented */
+ operandP < end_operandP;
- case 'T':
- as_warn ("TOKEN TRACE not implemented");
- break; /* TOKEN TRACE not implemented */
+ operandP++,
+ floatP++,
+ segP++,
+ expP++)
+ {
+ if (operandP->vop_ndx >= 0)
+ {
+ /* Indexed addressing byte. */
+ /* Legality of indexed mode already checked: it is OK. */
+ FRAG_APPEND_1_CHAR (0x40 + operandP->vop_ndx);
+ } /* if(vop_ndx>=0) */
- case 'd':
- case 't':
- opt = **argP;
- if (**argP)
- { /* Rest of argument is filename. */
- temp_name = *argP;
- while (**argP)
- (*argP)++;
- }
- else if (*cntP)
+ /* Here to make main operand frag(s). */
+ this_add_number = expP->X_add_number;
+ this_add_symbol = expP->X_add_symbol;
+ to_seg = *segP;
+ is_undefined = (to_seg == undefined_section);
+ is_absolute = (to_seg == absolute_section);
+ at = operandP->vop_mode & 1;
+ length = (operandP->vop_short == 'b'
+ ? 1 : (operandP->vop_short == 'w'
+ ? 2 : (operandP->vop_short == 'l'
+ ? 4 : 0)));
+ nbytes = operandP->vop_nbytes;
+ if (operandP->vop_access == 'b')
{
- while (**argP)
- (*argP)++;
- --(*cntP);
- temp_name = *++(*vecP);
- **vecP = NULL; /* Remember this is not a file-name. */
+ if (to_seg == now_seg || is_undefined)
+ {
+ /* If is_undefined, then it might BECOME now_seg. */
+ if (nbytes)
+ {
+ p = frag_more (nbytes);
+ fix_new (frag_now, p - frag_now->fr_literal, nbytes,
+ this_add_symbol, this_add_number, 1, NO_RELOC);
+ }
+ else
+ {
+ /* to_seg==now_seg || to_seg == SEG_UNKNOWN */
+ /* nbytes==0 */
+ length_code = is_undefined ? STATE_UNDF : STATE_BYTE;
+ if (opcode_as_number & VIT_OPCODE_SPECIAL)
+ {
+ if (operandP->vop_width == VAX_WIDTH_UNCONDITIONAL_JUMP)
+ {
+ /* br or jsb */
+ frag_var (rs_machine_dependent, 5, 1,
+ ENCODE_RELAX (STATE_ALWAYS_BRANCH, length_code),
+ this_add_symbol, this_add_number,
+ opcode_low_byteP);
+ }
+ else
+ {
+ if (operandP->vop_width == VAX_WIDTH_WORD_JUMP)
+ {
+ length_code = STATE_WORD;
+ /* JF: There is no state_byte for this one! */
+ frag_var (rs_machine_dependent, 10, 2,
+ ENCODE_RELAX (STATE_COMPLEX_BRANCH, length_code),
+ this_add_symbol, this_add_number,
+ opcode_low_byteP);
+ }
+ else
+ {
+ know (operandP->vop_width == VAX_WIDTH_BYTE_JUMP);
+ frag_var (rs_machine_dependent, 9, 1,
+ ENCODE_RELAX (STATE_COMPLEX_HOP, length_code),
+ this_add_symbol, this_add_number,
+ opcode_low_byteP);
+ }
+ }
+ }
+ else
+ {
+ know (operandP->vop_width == VAX_WIDTH_CONDITIONAL_JUMP);
+ frag_var (rs_machine_dependent, 7, 1,
+ ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, length_code),
+ this_add_symbol, this_add_number,
+ opcode_low_byteP);
+ }
+ }
+ }
+ else
+ {
+ /* to_seg != now_seg && to_seg != SEG_UNKNOWN */
+ /* --- SEG FLOAT MAY APPEAR HERE --- */
+ if (is_absolute)
+ {
+ if (nbytes)
+ {
+ know (!(opcode_as_number & VIT_OPCODE_SYNTHETIC));
+ p = frag_more (nbytes);
+ /* Conventional relocation. */
+ fix_new (frag_now, p - frag_now->fr_literal, nbytes,
+ section_symbol (absolute_section),
+ this_add_number, 1, NO_RELOC);
+ }
+ else
+ {
+ know (opcode_as_number & VIT_OPCODE_SYNTHETIC);
+ if (opcode_as_number & VIT_OPCODE_SPECIAL)
+ {
+ if (operandP->vop_width == VAX_WIDTH_UNCONDITIONAL_JUMP)
+ {
+ /* br or jsb */
+ *opcode_low_byteP = opcode_as_chars[0] + VAX_WIDEN_LONG;
+ know (opcode_as_chars[1] == 0);
+ p = frag_more (5);
+ p[0] = VAX_ABSOLUTE_MODE; /* @#... */
+ md_number_to_chars (p + 1, this_add_number, 4);
+ /* Now (eg) JMP @#foo or JSB @#foo. */
+ }
+ else
+ {
+ if (operandP->vop_width == VAX_WIDTH_WORD_JUMP)
+ {
+ p = frag_more (10);
+ p[0] = 2;
+ p[1] = 0;
+ p[2] = VAX_BRB;
+ p[3] = 6;
+ p[4] = VAX_JMP;
+ p[5] = VAX_ABSOLUTE_MODE; /* @#... */
+ md_number_to_chars (p + 6, this_add_number, 4);
+ /* Now (eg) ACBx 1f
+ BRB 2f
+ 1: JMP @#foo
+ 2: */
+ }
+ else
+ {
+ know (operandP->vop_width == VAX_WIDTH_BYTE_JUMP);
+ p = frag_more (9);
+ p[0] = 2;
+ p[1] = VAX_BRB;
+ p[2] = 6;
+ p[3] = VAX_JMP;
+ p[4] = VAX_ABSOLUTE_MODE; /* @#... */
+ md_number_to_chars (p + 5, this_add_number, 4);
+ /* Now (eg) xOBxxx 1f
+ BRB 2f
+ 1: JMP @#foo
+ 2: */
+ }
+ }
+ }
+ else
+ {
+ /* b<cond> */
+ *opcode_low_byteP ^= 1;
+ /* To reverse the condition in a VAX branch,
+ complement the lowest order bit. */
+ p = frag_more (7);
+ p[0] = 6;
+ p[1] = VAX_JMP;
+ p[2] = VAX_ABSOLUTE_MODE; /* @#... */
+ md_number_to_chars (p + 3, this_add_number, 4);
+ /* Now (eg) BLEQ 1f
+ JMP @#foo
+ 1: */
+ }
+ }
+ }
+ else
+ {
+ /* to_seg != now_seg && !is_undefinfed && !is_absolute */
+ if (nbytes > 0)
+ {
+ /* Pc-relative. Conventional relocation. */
+ know (!(opcode_as_number & VIT_OPCODE_SYNTHETIC));
+ p = frag_more (nbytes);
+ fix_new (frag_now, p - frag_now->fr_literal, nbytes,
+ section_symbol (absolute_section),
+ this_add_number, 1, NO_RELOC);
+ }
+ else
+ {
+ know (opcode_as_number & VIT_OPCODE_SYNTHETIC);
+ if (opcode_as_number & VIT_OPCODE_SPECIAL)
+ {
+ if (operandP->vop_width == VAX_WIDTH_UNCONDITIONAL_JUMP)
+ {
+ /* br or jsb */
+ know (opcode_as_chars[1] == 0);
+ *opcode_low_byteP = opcode_as_chars[0] + VAX_WIDEN_LONG;
+ p = frag_more (5);
+ p[0] = VAX_PC_RELATIVE_MODE;
+ fix_new (frag_now,
+ p + 1 - frag_now->fr_literal, 4,
+ this_add_symbol,
+ this_add_number, 1, NO_RELOC);
+ /* Now eg JMP foo or JSB foo. */
+ }
+ else
+ {
+ if (operandP->vop_width == VAX_WIDTH_WORD_JUMP)
+ {
+ p = frag_more (10);
+ p[0] = 0;
+ p[1] = 2;
+ p[2] = VAX_BRB;
+ p[3] = 6;
+ p[4] = VAX_JMP;
+ p[5] = VAX_PC_RELATIVE_MODE;
+ fix_new (frag_now,
+ p + 6 - frag_now->fr_literal, 4,
+ this_add_symbol,
+ this_add_number, 1, NO_RELOC);
+ /* Now (eg) ACBx 1f
+ BRB 2f
+ 1: JMP foo
+ 2: */
+ }
+ else
+ {
+ know (operandP->vop_width == VAX_WIDTH_BYTE_JUMP);
+ p = frag_more (10);
+ p[0] = 2;
+ p[1] = VAX_BRB;
+ p[2] = 6;
+ p[3] = VAX_JMP;
+ p[4] = VAX_PC_RELATIVE_MODE;
+ fix_new (frag_now,
+ p + 5 - frag_now->fr_literal,
+ 4, this_add_symbol,
+ this_add_number, 1, NO_RELOC);
+ /* Now (eg) xOBxxx 1f
+ BRB 2f
+ 1: JMP foo
+ 2: */
+ }
+ }
+ }
+ else
+ {
+ know (operandP->vop_width == VAX_WIDTH_CONDITIONAL_JUMP);
+ *opcode_low_byteP ^= 1; /* Reverse branch condition. */
+ p = frag_more (7);
+ p[0] = 6;
+ p[1] = VAX_JMP;
+ p[2] = VAX_PC_RELATIVE_MODE;
+ fix_new (frag_now, p + 3 - frag_now->fr_literal,
+ 4, this_add_symbol,
+ this_add_number, 1, NO_RELOC);
+ }
+ }
+ }
+ }
}
else
{
- as_warn ("I expected a filename after -%c.", opt);
- temp_name = "{absent}";
- }
-
- if (opt == 'd')
- as_warn ("Displacement length %s ignored!", temp_name);
- else
- as_warn ("I don't need or use temp. file \"%s\".", temp_name);
- break;
-
- case 'V':
- as_warn ("I don't use an interpass file! -V ignored");
- break;
-
-#ifdef VMS
- case '+': /* For g++ */
- break;
-
- case 'h': /* No hashing of mixed-case names */
- break;
-
- case 'H': /* Show new symbol after hash truncation */
- break;
+ /* So it is ordinary operand. */
+ know (operandP->vop_access != 'b');
+ /* ' ' target-independent: elsewhere. */
+ know (operandP->vop_access != ' ');
+ know (operandP->vop_access == 'a'
+ || operandP->vop_access == 'm'
+ || operandP->vop_access == 'r'
+ || operandP->vop_access == 'v'
+ || operandP->vop_access == 'w');
+ if (operandP->vop_short == 's')
+ {
+ if (is_absolute)
+ {
+ if (this_add_number >= 64)
+ {
+ as_warn (_("Short literal overflow(%ld.), immediate mode assumed."),
+ (long) this_add_number);
+ operandP->vop_short = 'i';
+ operandP->vop_mode = 8;
+ operandP->vop_reg = 0xF;
+ }
+ }
+ else
+ {
+ as_warn (_("Forced short literal to immediate mode. now_seg=%s to_seg=%s"),
+ segment_name (now_seg), segment_name (to_seg));
+ operandP->vop_short = 'i';
+ operandP->vop_mode = 8;
+ operandP->vop_reg = 0xF;
+ }
+ }
+ if (operandP->vop_reg >= 0 && (operandP->vop_mode < 8
+ || (operandP->vop_reg != 0xF && operandP->vop_mode < 10)))
+ {
+ /* One byte operand. */
+ know (operandP->vop_mode > 3);
+ FRAG_APPEND_1_CHAR (operandP->vop_mode << 4 | operandP->vop_reg);
+ /* All 1-bytes except S^# happen here. */
+ }
+ else
+ {
+ /* {@}{q^}foo{(Rn)} or S^#foo */
+ if (operandP->vop_reg == -1 && operandP->vop_short != 's')
+ {
+ /* "{@}{q^}foo" */
+ if (to_seg == now_seg)
+ {
+ if (length == 0)
+ {
+ know (operandP->vop_short == ' ');
+ length_code = STATE_BYTE;
+#ifdef OBJ_ELF
+ if (S_IS_EXTERNAL (this_add_symbol)
+ || S_IS_WEAK (this_add_symbol))
+ length_code = STATE_UNDF;
+#endif
+ p = frag_var (rs_machine_dependent, 10, 2,
+ ENCODE_RELAX (STATE_PC_RELATIVE, length_code),
+ this_add_symbol, this_add_number,
+ opcode_low_byteP);
+ know (operandP->vop_mode == 10 + at);
+ *p = at << 4;
+ /* At is the only context we need to carry
+ to other side of relax() process. Must
+ be in the correct bit position of VAX
+ operand spec. byte. */
+ }
+ else
+ {
+ know (length);
+ know (operandP->vop_short != ' ');
+ p = frag_more (length + 1);
+ p[0] = 0xF | ((at + "?\12\14?\16"[length]) << 4);
+ fix_new (frag_now, p + 1 - frag_now->fr_literal,
+ length, this_add_symbol,
+ this_add_number, 1, NO_RELOC);
+ }
+ }
+ else
+ {
+ /* to_seg != now_seg */
+ if (this_add_symbol == NULL)
+ {
+ know (is_absolute);
+ /* Do @#foo: simpler relocation than foo-.(pc) anyway. */
+ p = frag_more (5);
+ p[0] = VAX_ABSOLUTE_MODE; /* @#... */
+ md_number_to_chars (p + 1, this_add_number, 4);
+ if (length && length != 4)
+ as_warn (_("Length specification ignored. Address mode 9F used"));
+ }
+ else
+ {
+ /* {@}{q^}other_seg */
+ know ((length == 0 && operandP->vop_short == ' ')
+ || (length > 0 && operandP->vop_short != ' '));
+ if (is_undefined
+#ifdef OBJ_ELF
+ || S_IS_WEAK(this_add_symbol)
+ || S_IS_EXTERNAL(this_add_symbol)
+#endif
+ )
+ {
+ switch (length)
+ {
+ default: length_code = STATE_UNDF; break;
+ case 1: length_code = STATE_BYTE; break;
+ case 2: length_code = STATE_WORD; break;
+ case 4: length_code = STATE_LONG; break;
+ }
+ /* We have a SEG_UNKNOWN symbol. It might
+ turn out to be in the same segment as
+ the instruction, permitting relaxation. */
+ p = frag_var (rs_machine_dependent, 5, 2,
+ ENCODE_RELAX (STATE_PC_RELATIVE, length_code),
+ this_add_symbol, this_add_number,
+ opcode_low_byteP);
+ p[0] = at << 4;
+ }
+ else
+ {
+ if (length == 0)
+ {
+ know (operandP->vop_short == ' ');
+ length = 4; /* Longest possible. */
+ }
+ p = frag_more (length + 1);
+ p[0] = 0xF | ((at + "?\12\14?\16"[length]) << 4);
+ md_number_to_chars (p + 1, this_add_number, length);
+ fix_new (frag_now,
+ p + 1 - frag_now->fr_literal,
+ length, this_add_symbol,
+ this_add_number, 1, NO_RELOC);
+ }
+ }
+ }
+ }
+ else
+ {
+ /* {@}{q^}foo(Rn) or S^# or I^# or # */
+ if (operandP->vop_mode < 0xA)
+ {
+ /* # or S^# or I^# */
+ if (operandP->vop_access == 'v'
+ || operandP->vop_access == 'a')
+ {
+ if (operandP->vop_access == 'v')
+ as_warn (_("Invalid operand: immediate value used as base address."));
+ else
+ as_warn (_("Invalid operand: immediate value used as address."));
+ /* gcc 2.6.3 is known to generate these in at least
+ one case. */
+ }
+ if (length == 0
+ && is_absolute && (expP->X_op != O_big)
+ && operandP->vop_mode == 8 /* No '@'. */
+ && this_add_number < 64)
+ {
+ operandP->vop_short = 's';
+ }
+ if (operandP->vop_short == 's')
+ {
+ FRAG_APPEND_1_CHAR (this_add_number);
+ }
+ else
+ {
+ /* I^#... */
+ know (nbytes);
+ p = frag_more (nbytes + 1);
+ know (operandP->vop_reg == 0xF);
+#ifdef OBJ_ELF
+ if (flag_want_pic && operandP->vop_mode == 8
+ && this_add_symbol != NULL)
+ {
+ as_warn (_("Symbol used as immediate operand in PIC mode."));
+ }
#endif
+ p[0] = (operandP->vop_mode << 4) | 0xF;
+ if ((is_absolute) && (expP->X_op != O_big))
+ {
+ /* If nbytes > 4, then we are scrod. We
+ don't know if the high order bytes
+ are to be 0xFF or 0x00. BSD4.2 & RMS
+ say use 0x00. OK --- but this
+ assembler needs ANOTHER rewrite to
+ cope properly with this bug. */
+ md_number_to_chars (p + 1, this_add_number,
+ min (sizeof (valueT),
+ (size_t) nbytes));
+ if ((size_t) nbytes > sizeof (valueT))
+ memset (p + 5, '\0', nbytes - sizeof (valueT));
+ }
+ else
+ {
+ if (expP->X_op == O_big)
+ {
+ /* Problem here is to get the bytes
+ in the right order. We stored
+ our constant as LITTLENUMs, not
+ bytes. */
+ LITTLENUM_TYPE *lP;
- default:
- return 0;
+ lP = floatP->low;
+ if (nbytes & 1)
+ {
+ know (nbytes == 1);
+ p[1] = *lP;
+ }
+ else
+ {
+ for (p++; nbytes; nbytes -= 2, p += 2, lP++)
+ md_number_to_chars (p, *lP, 2);
+ }
+ }
+ else
+ {
+ fix_new (frag_now, p + 1 - frag_now->fr_literal,
+ nbytes, this_add_symbol,
+ this_add_number, 0, NO_RELOC);
+ }
+ }
+ }
+ }
+ else
+ {
+ /* {@}{q^}foo(Rn) */
+ know ((length == 0 && operandP->vop_short == ' ')
+ || (length > 0 && operandP->vop_short != ' '));
+ if (length == 0)
+ {
+ if (is_absolute)
+ {
+ long test;
- }
- return 1;
-}
+ test = this_add_number;
-/* We have no need to default values of symbols. */
+ if (test < 0)
+ test = ~test;
-/* ARGSUSED */
-symbolS *
-md_undefined_symbol (name)
- char *name;
-{
- return 0;
+ length = test & 0xffff8000 ? 4
+ : test & 0xffffff80 ? 2
+ : 1;
+ }
+ else
+ {
+ length = 4;
+ }
+ }
+ p = frag_more (1 + length);
+ know (operandP->vop_reg >= 0);
+ p[0] = operandP->vop_reg
+ | ((at | "?\12\14?\16"[length]) << 4);
+ if (is_absolute)
+ {
+ md_number_to_chars (p + 1, this_add_number, length);
+ }
+ else
+ {
+ fix_new (frag_now, p + 1 - frag_now->fr_literal,
+ length, this_add_symbol,
+ this_add_number, 0, NO_RELOC);
+ }
+ }
+ }
+ }
+ }
+ }
}
-/* Parse an operand that is machine-specific.
- We just return without modifying the expression if we have nothing
- to do. */
-
-/* ARGSUSED */
void
-md_operand (expressionP)
- expressionS *expressionP;
+md_begin (void)
{
-}
+ const char *errtxt;
+ FLONUM_TYPE *fP;
+ int i;
-/* Round up a section size to the appropriate boundary. */
-long
-md_section_align (segment, size)
- segT segment;
- long size;
-{
- return size; /* Byte alignment is fine */
-}
+ if ((errtxt = vip_begin (1, "$", "*", "`")) != 0)
+ as_fatal (_("VIP_BEGIN error:%s"), errtxt);
-/* Exactly what point is a PC-relative offset relative TO?
- On the vax, they're relative to the address of the offset, plus
- its size. (??? Is this right? FIXME-SOON) */
-long
-md_pcrel_from (fixP)
- fixS *fixP;
-{
- return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
+ for (i = 0, fP = float_operand;
+ fP < float_operand + VIT_MAX_OPERANDS;
+ i++, fP++)
+ {
+ fP->low = &big_operand_bits[i][0];
+ fP->high = &big_operand_bits[i][SIZE_OF_LARGE_NUMBER - 1];
+ }
}
-
-/* end of tc-vax.c */
projects / deliverable / binutils-gdb.git / blobdiff