You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 59 Temple Place - Suite 330, Boston,
- MA 02111-1307, USA. */
+ the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
+ MA 02110-1301, USA. */
#include <string.h>
#include <limits.h>
static enum debug_info_type xt_saved_debug_type = DEBUG_NONE;
/* Some functions are only valid in the front end. This variable
- allows us to assert that we haven't crossed over into the
+ allows us to assert that we haven't crossed over into the
back end. */
static bfd_boolean past_xtensa_end = FALSE;
int num_formats;
/* A number describing how restrictive the issue is for this
opcode. For example, an opcode that fits lots of different
- formats has a high freedom, as does an opcode that fits
+ formats has a high freedom, as does an opcode that fits
only one format but many slots in that format. The most
- restrictive is the opcode that fits only one slot in one
+ restrictive is the opcode that fits only one slot in one
format. */
int issuef;
/* The single format (i.e., if the op can live in a bundle by itself),
- narrowest format, and widest format the op can be bundled in
+ narrowest format, and widest format the op can be bundled in
and their sizes: */
xtensa_format single;
xtensa_format narrowest;
/* -Qy, -Qn: SVR4 arguments controlling whether a .comment section
should be emitted or not. FIXME: Not implemented. */
return 1;
-
+
case option_prefer_l32r:
if (prefer_const16)
as_fatal (_("prefer-l32r conflicts with prefer-const16"));
prefer_const16 = 1;
return 1;
- case option_target_hardware:
+ case option_target_hardware:
{
int earliest, latest = 0;
if (*arg == 0 || *arg == '-')
}
-/* The "loops_ok" argument is provided to allow ignoring labels that
- define loop ends. This fixes a bug where the NOPs to align a
+/* The "loops_ok" argument is provided to allow ignoring labels that
+ define loop ends. This fixes a bug where the NOPs to align a
loop opcode were included in a previous zero-cost loop:
loop a0, loopend
/* This code is a hack to make .begin [no-][generics|relax] exactly
equivalent to .begin [no-]transform. We should remove it when
we stop accepting those options. */
-
+
if (strncmp (input_line_pointer, "generics", strlen ("generics")) == 0)
{
as_warn (_("[no-]generics is deprecated; use [no-]transform instead"));
{
as_warn (_("[no-]relax is deprecated; use [no-]transform instead"));
directive_string = "transform";
- }
+ }
else
directive_string = input_line_pointer;
break;
case directive_literal_prefix:
- /* Have to flush pending output because a movi relaxed to an l32r
+ /* Have to flush pending output because a movi relaxed to an l32r
might produce a literal. */
md_flush_pending_output ();
/* Check to see if the current fragment is a literal
input_line_pointer = arg_end;
num_args += 1;
- saw_comma = FALSE;
+ saw_comma = FALSE;
saw_colon = FALSE;
- saw_arg = TRUE;
+ saw_arg = TRUE;
break;
}
}
else if (saw_colon)
as_bad (_("extra colon"));
else if (!saw_arg)
- as_bad (_("missing argument"));
+ as_bad (_("missing argument"));
else
as_bad (_("missing comma or colon"));
input_line_pointer = old_input_line_pointer;
goto err;
insn->ntok = tok - insn->tok;
- had_error = FALSE;
+ had_error = FALSE;
err:
input_line_pointer = old_input_line_pointer;
if (xtensa_operand_is_PCrelative (xtensa_default_isa, opcode, operand)
== 1)
as_bad_where ((char *) file, line,
- _("operand %u is out of range for '%s'"), value,
- xtensa_opcode_name (xtensa_default_isa, opcode));
+ _("operand %d of '%s' has out of range value '%u'"),
+ operand + 1,
+ xtensa_opcode_name (xtensa_default_isa, opcode),
+ value);
else
as_bad_where ((char *) file, line,
- _("operand %u is invalid for '%s'"), value,
- xtensa_opcode_name (xtensa_default_isa, opcode));
+ _("operand %d of '%s' has invalid value '%u'"),
+ operand + 1,
+ xtensa_opcode_name (xtensa_default_isa, opcode),
+ value);
return;
}
NARROW_ONLY is true, then only consider relaxations that widen a narrow
instruction, i.e., ignore relaxations that convert to an instruction of
equal size. In some contexts where this function is used, only
- a single widening is allowed and the NARROW_ONLY argument is used to
+ a single widening is allowed and the NARROW_ONLY argument is used to
exclude cases like ADDI being "widened" to an ADDMI, which may
later be relaxed to an ADDMI/ADDI pair. */
{
target += stretch;
}
-
+
new_offset = target;
xtensa_operand_do_reloc (isa, insn->opcode, i, &new_offset, pc);
if (xg_check_operand (new_offset, insn->opcode, i))
if (target_frag == NULL)
return FALSE;
- if (is_next_frag_target (fragP->fr_next, target_frag)
+ if (is_next_frag_target (fragP->fr_next, target_frag)
&& S_GET_VALUE (sym) == target_frag->fr_address)
return TRUE;
if (size > litsize)
{
/* This happens when someone writes a "movi a2, big_number". */
- as_bad_where (frag_now->fr_file, frag_now->fr_line,
+ as_bad_where (frag_now->fr_file, frag_now->fr_line,
_("invalid immediate"));
xtensa_restore_emit_state (&state);
return NULL;
the_fix->tc_fix_data.X_add_symbol = expr->X_add_symbol;
the_fix->tc_fix_data.X_add_number = expr->X_add_number;
the_fix->tc_fix_data.slot = slot;
-
+
return TRUE;
}
|| opcode == xtensa_waiti_opcode
|| opcode == xtensa_rsr_lcount_opcode)
return TRUE;
-
+
return FALSE;
}
{
fragS *next_fragP = fragP->fr_next;
- /* Sometimes an empty will end up here due storage allocation issues.
+ /* Sometimes an empty will end up here due storage allocation issues.
So we have to skip until we find something legit. */
while (next_fragP && next_fragP->fr_fix == 0)
next_fragP = next_fragP->fr_next;
static xtensa_insnbuf insnbuf = NULL;
xtensa_isa isa = xtensa_default_isa;
xtensa_format fmt;
- int fmt_size;
+ int fmt_size;
if (!insnbuf)
insnbuf = xtensa_insnbuf_alloc (isa);
if (fragP->fr_opcode != fragP->fr_literal)
return fmt_size;
- /* If during relaxation we have to pull an instruction out of a
+ /* If during relaxation we have to pull an instruction out of a
multi-slot instruction, we will return the more conservative
number. This works because alignment on bigger instructions
is more restrictive than alignment on smaller instructions.
if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP1
|| fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP2)
return 3;
-
+
if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
return 2 + fragP->tc_frag_data.text_expansion[0];
static bfd_boolean
next_frag_is_loop_target (const fragS *fragP)
{
- /* Sometimes an empty will end up here due storage allocation issues.
+ /* Sometimes an empty will end up here due storage allocation issues.
So we have to skip until we find something legit. */
for (fragP = fragP->fr_next; fragP; fragP = fragP->fr_next)
{
fragP->tc_frag_data.is_no_density = TRUE;
/* This function is called from subsegs_finish, which is called
- after xtensa_end, so we can't use "use_transform" or
+ after xtensa_end, so we can't use "use_transform" or
"use_schedule" here. */
if (!directive_state[directive_transform])
fragP->tc_frag_data.is_no_transform = TRUE;
flagword flags = bfd_get_section_flags (abfd, sec);
segment_info_type *seginfo = seg_info (sec);
fragS *frag = seginfo->frchainP->frch_root;
-
+
if (flags & SEC_CODE)
- {
+ {
xtensa_isa isa = xtensa_default_isa;
xtensa_insnbuf insnbuf = xtensa_insnbuf_alloc (isa);
while (frag != NULL)
segment_info_type *seginfo = seg_info (sec);
fragS *frag = seginfo->frchainP->frch_root;
xtensa_isa isa = xtensa_default_isa;
-
+
if (flags & SEC_CODE)
- {
+ {
xtensa_insnbuf insnbuf = xtensa_insnbuf_alloc (isa);
while (frag != NULL)
{
}
dwarf2_where (&orig_insn.loc);
-
+
xg_add_branch_and_loop_targets (&orig_insn);
/* Special-case for "entry" instruction. */
int count;
count = fragP->fr_next->fr_address - fragP->fr_address - fragP->fr_fix;
if (count != 0)
- as_bad_where (fragP->fr_file, fragP->fr_line,
+ as_bad_where (fragP->fr_file, fragP->fr_line,
_("unaligned entry instruction"));
}
}
\f
/* Checks for resource conflicts between instructions. */
-/* The func unit stuff could be implemented as bit-vectors rather
- than the iterative approach here. If it ends up being too
+/* The func unit stuff could be implemented as bit-vectors rather
+ than the iterative approach here. If it ends up being too
slow, we will switch it. */
-resource_table *
+resource_table *
new_resource_table (void *data,
int cycles,
int nu,
}
-void
+void
clear_resource_table (resource_table *rt)
{
int i, j;
/* We never shrink it, just fake it into thinking so. */
-void
+void
resize_resource_table (resource_table *rt, int cycles)
{
int i, old_cycles;
}
-bfd_boolean
+bfd_boolean
resources_available (resource_table *rt, xtensa_opcode opcode, int cycle)
{
int i;
int uses = (rt->opcode_num_units) (rt->data, opcode);
- for (i = 0; i < uses; i++)
+ for (i = 0; i < uses; i++)
{
xtensa_funcUnit unit = (rt->opcode_unit_use) (rt->data, opcode, i);
int stage = (rt->opcode_unit_stage) (rt->data, opcode, i);
}
return TRUE;
}
-
-void
+
+void
reserve_resources (resource_table *rt, xtensa_opcode opcode, int cycle)
{
int i;
int uses = (rt->opcode_num_units) (rt->data, opcode);
- for (i = 0; i < uses; i++)
+ for (i = 0; i < uses; i++)
{
xtensa_funcUnit unit = (rt->opcode_unit_use) (rt->data, opcode, i);
int stage = (rt->opcode_unit_stage) (rt->data, opcode, i);
- /* Note that this allows resources to be oversubscribed. That's
- essential to the way the optional scheduler works.
+ /* Note that this allows resources to be oversubscribed. That's
+ essential to the way the optional scheduler works.
resources_available reports when a resource is over-subscribed,
so it's easy to tell. */
rt->units[stage + cycle][unit]++;
}
-void
+void
release_resources (resource_table *rt, xtensa_opcode opcode, int cycle)
{
int i;
int uses = (rt->opcode_num_units) (rt->data, opcode);
- for (i = 0; i < uses; i++)
+ for (i = 0; i < uses; i++)
{
xtensa_funcUnit unit = (rt->opcode_unit_use) (rt->data, opcode, i);
int stage = (rt->opcode_unit_stage) (rt->data, opcode, i);
assert (rt->units[stage + cycle][unit] >= 0);
}
}
-
+
/* Wrapper functions make parameterized resource reservation
more convenient. */
-int
+int
opcode_funcUnit_use_unit (void *data, xtensa_opcode opcode, int idx)
{
xtensa_funcUnit_use *use = xtensa_opcode_funcUnit_use (data, opcode, idx);
- return use->unit;
+ return use->unit;
}
-int
+int
opcode_funcUnit_use_stage (void *data, xtensa_opcode opcode, int idx)
{
xtensa_funcUnit_use *use = xtensa_opcode_funcUnit_use (data, opcode, idx);
/* Note that this function does not check issue constraints, but
solely whether the hardware is available to execute the given
- instructions together. It also doesn't check if the tinsns
+ instructions together. It also doesn't check if the tinsns
write the same state, or access the same tieports. That is
checked by check_t1_t2_reads_and_writes. */
if (vinsn->num_slots == 1)
return FALSE;
- if (rt == NULL)
+ if (rt == NULL)
{
xtensa_isa isa = xtensa_default_isa;
rt = new_resource_table
return;
}
- if (resources_conflict (vinsn))
+ if (resources_conflict (vinsn))
{
as_where (&file_name, &line);
as_bad_where (file_name, line, _("illegal resource usage in bundle"));
if (vinsn->format == XTENSA_UNDEFINED)
vinsn->slots[i].opcode = xtensa_nop_opcode;
else
- vinsn->slots[i].opcode
+ vinsn->slots[i].opcode
= xtensa_format_slot_nop_opcode (xtensa_default_isa,
vinsn->format, i);
}
/* Now check resource conflicts on the modified bundle. */
- if (resources_conflict (vinsn))
+ if (resources_conflict (vinsn))
{
as_where (&file_name, &line);
as_bad_where (file_name, line, _("illegal resource usage in bundle"));
case A: t1 reads a register t2 writes (an antidependency within a bundle)
case B: no relationship between what is read and written (both could
read the same reg though)
- case C: t1 writes a register t2 writes (a register conflict within a
+ case C: t1 writes a register t2 writes (a register conflict within a
bundle)
case D: t1 writes a state that t2 also writes
case E: t1 writes a tie queue that t2 also writes
{
xtensa_state t1_so = xtensa_stateOperand_state (isa, t1->opcode, i);
t1_inout = xtensa_stateOperand_inout (isa, t1->opcode, i);
- if (t1_so != t2_so)
+ if (t1_so != t2_so)
continue;
if (t2_inout == 'i' && (t1_inout == 'm' || t1_inout == 'o'))
conflict = 'a';
continue;
}
-
+
if (t1_inout == 'i' && (t2_inout == 'm' || t2_inout == 'o'))
{
conflict = 'a';
continue;
}
-
+
if (t1_inout != 'i' && t2_inout != 'i')
return 'd';
- }
+ }
}
/* Check tieports. */
t1_interfaces = xtensa_opcode_num_interfaceOperands (isa, t1->opcode);
t2_interfaces = xtensa_opcode_num_interfaceOperands (isa, t2->opcode);
- for (j = 0; j < t2_interfaces; j++)
+ for (j = 0; j < t2_interfaces; j++)
{
xtensa_interface t2_int
= xtensa_interfaceOperand_interface (isa, t2->opcode, j);
if (t1_volatile && t2_volatile && (t1_class == t2_class))
return 'f';
-
+
if (t1_int != t2_int)
continue;
-
+
if (t2_inout == 'i' && t1_inout == 'o')
{
conflict = 'a';
continue;
}
-
+
if (t1_inout == 'i' && t2_inout == 'o')
{
conflict = 'a';
continue;
}
-
+
if (t1_inout != 'i' && t2_inout != 'i')
return 'e';
}
}
-
+
return conflict;
}
extra_space += 3; /* for the nop size */
tinsn->subtype = RELAX_ADD_NOP_IF_PRE_LOOP_END;
}
-
+
/* Need to assemble it with space for the relocation. */
if (xg_is_relaxable_insn (tinsn, 0)
&& !tinsn->is_specific_opcode)
int max_size = xg_get_max_insn_widen_size (tinsn->opcode);
int max_literal_size =
xg_get_max_insn_widen_literal_size (tinsn->opcode);
-
+
tinsn->literal_space = max_literal_size;
-
+
tinsn->subtype = RELAX_IMMED;
tinsn->record_fix = FALSE;
extra_space += max_size;
istack_init (&istack);
/* Special-case for "movi aX, foo" which is guaranteed to need relaxing.
- Because the scheduling and bundling characteristics of movi and
- l32r or const16 are so different, we can do much better if we relax
+ Because the scheduling and bundling characteristics of movi and
+ l32r or const16 are so different, we can do much better if we relax
it prior to scheduling and bundling, rather than after. */
- if ((orig_insn->opcode == xtensa_movi_opcode
+ if ((orig_insn->opcode == xtensa_movi_opcode
|| orig_insn->opcode == xtensa_movi_n_opcode)
&& !cur_vinsn.inside_bundle
&& (orig_insn->tok[1].X_op == O_symbol
for (i = 0; i < istack.ninsn; i++)
{
TInsn *insn = &istack.insn[i];
- switch (insn->insn_type)
+ switch (insn->insn_type)
{
case ITYPE_LITERAL:
assert (lit_sym == NULL);
/* See if the instruction implies an aligned section. */
if (xtensa_opcode_is_loop (isa, vinsn->slots[i].opcode) == 1)
record_alignment (now_seg, 2);
-
+
/* Also determine the best line number for debug info. */
- best_loc = vinsn->slots[i].loc.line < best_loc.line
+ best_loc = vinsn->slots[i].loc.line < best_loc.line
? vinsn->slots[i].loc : best_loc;
}
if (xtensa_opcode_is_loop (isa, vinsn->slots[0].opcode) == 1)
{
int max_fill;
-
+
xtensa_set_frag_assembly_state (frag_now);
frag_now->tc_frag_data.is_insn = TRUE;
-
+
max_fill = get_text_align_max_fill_size
(get_text_align_power (xtensa_fetch_width),
TRUE, frag_now->tc_frag_data.is_no_density);
frag_now->fr_offset,
NULL);
else
- frag_var (rs_machine_dependent, 0, 0,
+ frag_var (rs_machine_dependent, 0, 0,
RELAX_CHECK_ALIGN_NEXT_OPCODE, 0, 0, NULL);
xtensa_set_frag_assembly_state (frag_now);
-
+
xtensa_move_labels (frag_now, 0, FALSE);
}
return;
xtensa_insnbuf_to_chars (isa, vinsn->insnbuf, (unsigned char *) f, 0);
-
- xtensa_dwarf2_emit_insn (insn_size - extra_space, &best_loc);
+
+ xtensa_dwarf2_emit_insn (insn_size + extra_space, &best_loc);
for (slot = 0; slot < vinsn->num_slots; slot++)
{
if (xtensa_opcode_is_branch (isa, tinsn->opcode) == 1)
is_branch = TRUE;
- if (tinsn->subtype || tinsn->symbol || tinsn->record_fix
+ if (tinsn->subtype || tinsn->symbol || tinsn->record_fix
|| tinsn->offset || tinsn->literal_frag || is_jump || is_branch)
finish_frag = TRUE;
}
&& fragP->fr_subtype == RELAX_SLOTS
&& fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)
frag_wane (fragP);
- if (fragP->fr_type == rs_machine_dependent
+ if (fragP->fr_type == rs_machine_dependent
&& fragP->fr_subtype == RELAX_UNREACHABLE)
fragP->tc_frag_data.is_unreachable = TRUE;
}
/* Of course, sometimes (mostly for toy test cases) a
zero-cost loop instruction is the last in a section. */
- if (targ_frag)
- {
- targ_frag->tc_frag_data.is_first_loop_insn = TRUE;
- if (fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE)
- frag_wane (fragP);
- }
+ if (targ_frag)
+ targ_frag->tc_frag_data.is_first_loop_insn = TRUE;
+ if (fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE)
+ frag_wane (fragP);
}
}
}
< REQUIRED_LOOP_DIVIDING_BYTES)
{
int length = 3;
-
+
if (fragP->fr_var < length)
as_fatal (_("fr_var %lu < length %d"),
(long) fragP->fr_var, length);
switch (fragP->fr_type)
{
case 0:
- /* Empty frags created by the obstack allocation scheme
+ /* Empty frags created by the obstack allocation scheme
end up with type 0. */
break;
case rs_fill:
alignment = (1 << align_pow);
assert (target_size > 0 && alignment >= (addressT) target_size);
-
+
if (!use_nops)
{
fill_limit = alignment;
the smallest number of bytes that need to be added to
ensure that the next fragment's FIRST instruction will fit
in a single word.
-
+
E.G., 2 bytes : 0, 1, 2 mod 4
3 bytes: 0, 1 mod 4
-
+
If the FIRST instruction MIGHT be relaxed,
assume that it will become a 3-byte instruction.
-
+
Note again here that LOOP instructions are not bundleable,
and this relaxation only applies to LOOP opcodes. */
-
+
int fill_size = 0;
int first_insn_size;
int loop_insn_size;
/* If it was 8, then we'll need a larger alignment for the section. */
align_power = get_text_align_power (first_insn_size);
record_alignment (now_seg, align_power);
-
+
fill_size = get_text_align_fill_size
(address + pre_opcode_bytes, align_power, first_insn_size, TRUE,
fragP->tc_frag_data.is_no_density);
}
/* Tell gas we need another relaxation pass. */
- if (! fragP->tc_frag_data.relax_seen)
+ if (! fragP->tc_frag_data.relax_seen)
{
fragP->tc_frag_data.relax_seen = TRUE;
*stretched_p = 1;
return 0;
}
}
- else
+ else
{
/* Just punt if we don't know the type. */
*fragPP = fragP;
opt_diff = local_opt_diff;
assert (opt_diff >= 0);
assert (max_diff >= opt_diff);
- if (max_diff == 0)
+ if (max_diff == 0)
return 0;
if (fragP)
while (fragP && opt_diff < max_diff && address)
{
/* We only use these to determine if we can exit early
- because there will be plenty of ways to align future
+ because there will be plenty of ways to align future
align frags. */
int glob_widens = 0;
int dnn = 0;
if (glob_pad || glob_widens >= (1 << branch_align_power (now_seg)))
break;
- if (address)
+ if (address)
{
offsetT next_m_diff;
offsetT next_o_diff;
}
return 0;
}
- local_stretch_amount
+ local_stretch_amount
= bytes_to_stretch (this_frag, wide_nops, narrow_nops,
num_widens, local_opt_diff);
- global_stretch_amount
- = bytes_to_stretch (this_frag, wide_nops, narrow_nops,
+ global_stretch_amount
+ = bytes_to_stretch (this_frag, wide_nops, narrow_nops,
num_widens, opt_diff);
- /* If the condition below is true, then the frag couldn't
- stretch the correct amount for the global case, so we just
- optimize locally. We'll rely on the subsequent frags to get
+ /* If the condition below is true, then the frag couldn't
+ stretch the correct amount for the global case, so we just
+ optimize locally. We'll rely on the subsequent frags to get
the correct alignment in the global case. */
if (global_stretch_amount < local_stretch_amount)
stretch_amount = local_stretch_amount;
assert (desired_diff >= 0 && desired_diff < 8);
if (desired_diff == 0)
return 0;
-
+
assert (wide_nops > 0 || num_widens > 0);
/* Always prefer widening to NOP-filling. */
to align the target without widening this frag in any way. */
return 0;
}
-
+
if (bytes_short == 0)
{
/* Widen every narrow between here and the align target
else
return 1;
}
-
+
/* From here we will need at least one NOP to get an alignment.
However, we may not be able to align at all, in which case,
don't widen. */
if (!this_frag->tc_frag_data.is_no_density && narrow_nops == 1)
return 2; /* case 2 */
return 0;
- case 3:
+ case 3:
if (wide_nops > 1)
return 0;
else
case 5:
if (num_widens >= 2 && wide_nops == 1)
return 3; /* case 5a */
- /* We will need two nops. Are there enough nops
+ /* We will need two nops. Are there enough nops
between here and the align target? */
if (wide_nops < 2 || narrow_nops == 0)
return 0;
}
else
{
- /* We will need a NOP no matter what, but should we widen
+ /* We will need a NOP no matter what, but should we widen
this instruction to help?
This is a RELAX_FRAG_NARROW frag. */
\f
/* Segment Lists and emit_state Stuff. */
-/* Remove the segment from the global sections list. */
-
-static void
-xtensa_remove_section (segT sec)
-{
- /* Handle brain-dead bfd_section_list_remove macro, which
- expect the address of the prior section's "next" field, not
- just the address of the section to remove. */
-
- segT *ps_next_ptr = &stdoutput->sections;
- while (*ps_next_ptr != sec && *ps_next_ptr != NULL)
- ps_next_ptr = &(*ps_next_ptr)->next;
-
- assert (*ps_next_ptr != NULL);
-
- bfd_section_list_remove (stdoutput, ps_next_ptr);
-}
-
-
-static void
-xtensa_insert_section (segT after_sec, segT sec)
-{
- segT *after_sec_next;
- if (after_sec == NULL)
- after_sec_next = &stdoutput->sections;
- else
- after_sec_next = &after_sec->next;
-
- bfd_section_list_insert (stdoutput, after_sec_next, sec);
-}
-
-
static void
xtensa_move_seg_list_to_beginning (seg_list *head)
{
/* Move the literal section to the front of the section list. */
assert (literal_section);
- xtensa_remove_section (literal_section);
- xtensa_insert_section (NULL, literal_section);
-
+ if (literal_section != stdoutput->sections)
+ {
+ bfd_section_list_remove (stdoutput, literal_section);
+ bfd_section_list_prepend (stdoutput, literal_section);
+ }
head = head->next;
}
}
{
frchain_from = seg_info (segment->seg)->frchainP;
search_frag = frchain_from->frch_root;
- while (search_frag)
+ while (search_frag)
{
search_frag->tc_frag_data.is_literal = TRUE;
search_frag = search_frag->fr_next;
assert (literal_section);
if (literal_section != after)
{
- xtensa_remove_section (literal_section);
- xtensa_insert_section (after, literal_section);
+ bfd_section_list_remove (stdoutput, literal_section);
+ bfd_section_list_insert_after (stdoutput, after, literal_section);
}
head = head->next;
static bfd_boolean recursive = FALSE;
fragS *pool_location = get_literal_pool_location (now_seg);
- bfd_boolean is_init =
+ bfd_boolean is_init =
(now_seg && !strcmp (segment_name (now_seg), INIT_SECTION_NAME));
- bfd_boolean is_fini =
+ bfd_boolean is_fini =
(now_seg && !strcmp (segment_name (now_seg), FINI_SECTION_NAME));
if (pool_location == NULL
vinsn_has_specific_opcodes (vliw_insn *v)
{
int i;
-
+
for (i = 0; i < v->num_slots; i++)
{
if (v->slots[i].is_specific_opcode)
projects / deliverable / binutils-gdb.git / blobdiff