#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.8
-# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
+# Generated automatically using autoconf version 2.12.1
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
+ac_help="$ac_help
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+ac_help="$ac_help
+ --enable-shared build shared libraries [default=yes]"
+ac_help="$ac_help
+ --enable-static build static libraries [default=yes]"
ac_help="$ac_help
--enable-bfd-assembler use BFD back end for writing object files"
ac_help="$ac_help
targets alternative target configurations besides the primary"
ac_help="$ac_help
- --enable-shared build shared BFD library"
+ --enable-commonbfdlib build shared BFD/opcodes/libiberty library"
+ac_help="$ac_help
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.8"
+ echo "configure generated by autoconf version 2.12.1"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+# Only set these to C if already set. These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
ac_n= ac_c='\c' ac_t=
fi
-user_bfd_gas=
-# Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
-if test "${enable_bfd_assembler+set}" = set; then
- enableval="$enable_bfd_assembler"
- case "${enableval}" in
- yes) need_bfd=yes user_bfd_gas=yes ;;
- no) user_bfd_gas=no ;;
- *) { echo "configure: error: bad value ${enableval} given for bfd-assembler option" 1>&2; exit 1; } ;;
-esac
-fi
-# Check whether --enable-targets or --disable-targets was given.
-if test "${enable_targets+set}" = set; then
- enableval="$enable_targets"
- case "${enableval}" in
- yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; }
- ;;
- no) enable_targets= ;;
- *) enable_targets=$enableval ;;
-esac
-fi
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- case "${enableval}" in
- yes) shared=true ;;
- no) shared=false ;;
- *) { echo "configure: error: bad value ${enableval} for BFD shared option" 1>&2; exit 1; } ;;
-esac
-fi
-
-# Generate a header file -- gets more post-processing by Makefile later.
ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/..; do
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/.." 1>&2; exit 1; }
+ { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
# Make sure we can run config.sub.
-if $ac_config_sub sun4 >/dev/null 2>&1; then :
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:586: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
- if host_alias=`$ac_config_guess`; then :
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
-host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:607: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac ;;
esac
-target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:625: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac ;;
esac
-build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
NONENONEs,x,x, &&
program_prefix=${target_alias}-
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:660: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+
+PACKAGE=gas
+
+VERSION=2.8.2
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:730: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ test "$2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
else
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:777: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+ ACLOCAL=aclocal
+ echo "$ac_t""found" 1>&6
+else
+ ACLOCAL="$missing_dir/missing aclocal"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:790: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+ AUTOCONF=autoconf
+ echo "$ac_t""found" 1>&6
+else
+ AUTOCONF="$missing_dir/missing autoconf"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:803: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+ AUTOMAKE=automake
+ echo "$ac_t""found" 1>&6
+else
+ AUTOMAKE="$missing_dir/missing automake"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:816: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+ AUTOHEADER=autoheader
+ echo "$ac_t""found" 1>&6
+else
+ AUTOHEADER="$missing_dir/missing autoheader"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:829: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+ MAKEINFO=makeinfo
+ echo "$ac_t""found" 1>&6
+else
+ MAKEINFO="$missing_dir/missing makeinfo"
+ echo "$ac_t""missing" 1>&6
+fi
-te_file=generic
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:842: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
-canon_targets=""
-if test -n "$enable_targets" ; then
- for t in `echo $enable_targets | sed 's/,/ /g'`; do
- result=`$ac_config_sub $t 2>/dev/null`
- if test -n "$result" ; then
- canon_targets="$canon_targets $result"
-# else
-# # Permit "all", etc. We don't support it yet though.
-# canon_targets="$canon_targets $t"
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:872: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
fi
done
- _gas_uniq_list="$canon_targets"
-_gas_uniq_newlist=""
-for _gas_uniq_i in _gas_uniq_dummy $_gas_uniq_list ; do
- case $_gas_uniq_i in
- _gas_uniq_dummy) ;;
- *) case " $_gas_uniq_newlist " in
- *" $_gas_uniq_i "*) ;;
- *) _gas_uniq_newlist="$_gas_uniq_newlist $_gas_uniq_i" ;;
- esac ;;
- esac
-done
-canon_targets=$_gas_uniq_newlist
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:901: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
-emulations=""
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:930: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ ac_prog_rejected=no
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
-for this_target in $target $canon_targets ; do
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
- eval `echo $this_target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:978: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
- # check for architecture variants
- case ${cpu} in
- armeb) cpu_type=arm endian=big ;;
- arm*) cpu_type=arm endian=little ;;
- hppa*) cpu_type=hppa ;;
- i[456]86) cpu_type=i386 ;;
- m680[012346]0) cpu_type=m68k ;;
- m68008) cpu_type=m68k ;;
- m683??) cpu_type=m68k ;;
- m8*) cpu_type=m88k ;;
- mips*el) cpu_type=mips endian=little;;
- mips*) cpu_type=mips endian=big ;;
- powerpcle*) cpu_type=ppc endian=little ;;
- powerpc*) cpu_type=ppc endian=big ;;
- rs6000*) cpu_type=ppc ;;
- sparc64) cpu_type=sparc want_sparc_v9=true ;;
- sparc*) cpu_type=sparc ;;
- *) cpu_type=${cpu} ;;
- esac
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
- if test ${this_target} = $target ; then
- target_cpu_type=${cpu_type}
- elif test ${target_cpu_type} != ${cpu_type} ; then
- continue
- fi
+cat > conftest.$ac_ext <<EOF
+#line 988 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+if { (eval echo configure:992: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1012: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1017: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1026: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+ ac_test_CFLAGS="${CFLAGS+set}"
+ ac_save_CFLAGS="$CFLAGS"
+ CFLAGS=
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1041: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-O2"
+ fi
+else
+ GCC=
+ test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+echo "configure:1081: checking for ld used by GCC" >&5
+ ac_prog=`($CC -print-prog-name=ld) 2>&5`
+ case "$ac_prog" in
+ # Accept absolute paths.
+ /*)
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+echo "configure:1099: checking for GNU ld" >&5
+else
+ echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+echo "configure:1102: checking for non-GNU ld" >&5
+fi
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog"; then
+ ac_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+
+echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+echo "configure:1138: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ ac_cv_prog_gnu_ld=yes
+else
+ ac_cv_prog_gnu_ld=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+
+
+echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+echo "configure:1154: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$NM" in
+/*)
+ ac_cv_path_NM="$NM" # Let the user override the test with a path.
+ ;;
+*)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+ test -z "$ac_dir" && dir=.
+ if test -f $ac_dir/nm; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1!d' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1!d'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -B"
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1!d'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -p"
+ else
+ ac_cv_path_NM="$ac_dir/nm"
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+ ;;
+esac
+fi
+
+NM="$ac_cv_path_NM"
+echo "$ac_t""$NM" 1>&6
+
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1191: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+
+
+
+
+
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-bogus-package-name}
+ case "$enableval" in
+ yes) libtool_enable_shared=yes ;;
+ no) libtool_enable_shared=no ;;
+ # The value of $p (aka $PACKAGE) is assumed to come from AM_INIT_AUTOMAKE.
+ # If it didn't, it'll be `bogus-package-name', thus making this condition
+ # not be used.
+ *$p*) libtool_enable_shared=yes ;;
+ *) libtool_enable_shared=no ;;
+esac
+fi
+
+test -n "$libtool_enable_shared" && enable_shared="$libtool_enable_shared"
+libtool_shared=
+test "$enable_shared" = no && libtool_shared=" --disable-shared"
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ if test "$enableval" = no; then
+ libtool_enable_static=no
+else
+ libtool_enable_static=yes
+fi
+fi
+
+test -n "$libtool_enable_static" && enable_static="$libtool_enable_static"
+libtool_static=
+test "$enable_static" = no && libtool_static=" --disable-static"
+
+libtool_flags="$libtool_shared$libtool_static"
+test "$silent" = yes && libtool_flags="$libtool_flags --silent"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$host" in
+*-*-irix*)
+ # Find out which ABI we are using.
+ echo '#line 1265 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1266: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ CFLAGS="$CFLAGS -belf"
+ ;;
+esac
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+
+
+user_bfd_gas=
+# Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
+if test "${enable_bfd_assembler+set}" = set; then
+ enableval="$enable_bfd_assembler"
+ case "${enableval}" in
+ yes) need_bfd=yes user_bfd_gas=yes ;;
+ no) user_bfd_gas=no ;;
+ *) { echo "configure: error: bad value ${enableval} given for bfd-assembler option" 1>&2; exit 1; } ;;
+esac
+fi
+# Check whether --enable-targets or --disable-targets was given.
+if test "${enable_targets+set}" = set; then
+ enableval="$enable_targets"
+ case "${enableval}" in
+ yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; }
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac
+fi
+# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given.
+if test "${enable_commonbfdlib+set}" = set; then
+ enableval="$enable_commonbfdlib"
+ case "${enableval}" in
+ yes) commonbfdlib=true ;;
+ no) commonbfdlib=false ;;
+ *) { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;;
+esac
+fi
+
+# Generate a header file
+
+
+
+
+te_file=generic
+
+canon_targets=""
+if test -n "$enable_targets" ; then
+ for t in `echo $enable_targets | sed 's/,/ /g'`; do
+ result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $t 2>/dev/null`
+ if test -n "$result" ; then
+ canon_targets="$canon_targets $result"
+# else
+# # Permit "all", etc. We don't support it yet though.
+# canon_targets="$canon_targets $t"
+ fi
+ done
+ _gas_uniq_list="$canon_targets"
+_gas_uniq_newlist=""
+for _gas_uniq_i in _gas_uniq_dummy $_gas_uniq_list ; do
+ case $_gas_uniq_i in
+ _gas_uniq_dummy) ;;
+ *) case " $_gas_uniq_newlist " in
+ *" $_gas_uniq_i "*) ;;
+ *) _gas_uniq_newlist="$_gas_uniq_newlist $_gas_uniq_i" ;;
+ esac ;;
+ esac
+done
+canon_targets=$_gas_uniq_newlist
+
+fi
+
+emulations=""
+
+for this_target in $target $canon_targets ; do
+
+ eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
+
+ # check for architecture variants
+ arch=
+ endian=
+ case ${cpu} in
+ alpha*) cpu_type=alpha ;;
+ armeb) cpu_type=arm endian=big ;;
+ arm*) cpu_type=arm endian=little ;;
+ thumb*) cpu_type=arm endian=little ;;
+ hppa*) cpu_type=hppa ;;
+ i[456]86) cpu_type=i386 ;;
+ m680[012346]0) cpu_type=m68k ;;
+ m68008) cpu_type=m68k ;;
+ m683??) cpu_type=m68k ;;
+ m8*) cpu_type=m88k ;;
+ mips*el) cpu_type=mips endian=little ;;
+# start-sanitize-r5900
+ mips*5900*) cpu_type=mips endian=little ;;
+# end-sanitize-r5900
+ mips*) cpu_type=mips endian=big ;;
+ powerpcle*) cpu_type=ppc endian=little ;;
+ powerpc*) cpu_type=ppc endian=big ;;
+ rs6000*) cpu_type=ppc ;;
+ sparclite*) cpu_type=sparc arch=sparclite ;;
+ sparclet*) cpu_type=sparc arch=sparclet ;;
+ sparc64*) cpu_type=sparc arch=v9-64 ;;
+ sparc*) cpu_type=sparc arch=sparclite ;; # ??? See tc-sparc.c.
+ v850*) cpu_type=v850 ;;
+ *) cpu_type=${cpu} ;;
+ esac
+
+ if test ${this_target} = $target ; then
+ target_cpu_type=${cpu_type}
+ if test x${endian} = xbig; then
+ cat >> confdefs.h <<\EOF
+#define TARGET_BYTES_BIG_ENDIAN 1
+EOF
+
+ elif test x${endian} = xlittle; then
+ cat >> confdefs.h <<\EOF
+#define TARGET_BYTES_BIG_ENDIAN 0
+EOF
+
+ fi
+ elif test ${target_cpu_type} != ${cpu_type} ; then
+ continue
+ fi
- targ=${cpu_type}
generic_target=${cpu_type}-$vendor-$os
dev=no
bfd_gas=no
# assign object format
case ${generic_target} in
- a29k-*-coff) fmt=coff targ=ebmon29k ;;
- a29k-amd-udi) fmt=coff targ=ebmon29k ;;
- a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
- a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
+ a29k-*-coff) fmt=coff ;;
+ a29k-amd-udi) fmt=coff ;;
+ a29k-amd-ebmon) fmt=coff ;;
+ a29k-nyu-sym1) fmt=coff ;;
a29k-*-vxworks*) fmt=coff ;;
- alpha-*-netware*) fmt=ecoff ;;
- alpha-*-osf*) fmt=ecoff ;;
- alpha-*-linux*) fmt=ecoff ;;
+ alpha*-*-*vms*) fmt=evax ;;
+ alpha*-*-netware*) fmt=ecoff ;;
+ alpha*-*-openbsd*) fmt=ecoff ;;
+ alpha*-*-osf*) fmt=ecoff ;;
+ alpha*-*-linuxecoff*) fmt=ecoff ;;
+ alpha*-*-linux-gnu*) fmt=elf em=linux ;;
+ alpha*-*-netbsd*) fmt=elf em=nbsd ;;
-# start-sanitize-arc
arc-*-elf*) fmt=elf bfd_gas=yes ;;
-# end-sanitize-arc
- arm-*-riscix*) fmt=aout targ=arm-lit ;;
- arm-*-aout) fmt=aout
- case "$endian" in
- big) targ=arm-big ;;
- *) targ=arm-lit ;;
- esac
- ;;
- arm-*-coff) fmt=coff ;;
+ arm-*-riscix*) fmt=aout em=riscix ;;
+ arm-*-aout) fmt=aout ;;
+ arm-*-coff | thumb-*-coff) fmt=coff ;;
arm-*-riscix*) fmt=aout ;;
- arm-*-pe) fmt=coff targ=armcoff em=pe ;;
+ arm-*-pe) fmt=coff em=pe ;;
+
+ d10v-*-*) fmt=elf bfd_gas=yes ;;
+# start-sanitize-d30v
+ d30v-*-*) fmt=elf bfd_gas=yes ;;
+# end-sanitize-d30v
hppa-*-*elf*) fmt=elf em=hppa ;;
hppa-*-lites*) fmt=elf em=hppa ;;
hppa-*-osf*) fmt=som em=hppa ;;
+ hppa-*-rtems*) fmt=elf em=hppa ;;
hppa-*-hpux*) fmt=som em=hppa ;;
hppa-*-bsd*) fmt=som em=hppa ;;
hppa-*-hiux*) fmt=som em=hppa ;;
h8300-*-coff) fmt=coff ;;
- i386-ibm-aix*) fmt=coff targ=i386coff
- em=i386aix ;;
+ i386-ibm-aix*) fmt=coff em=i386aix ;;
+ i386-sequent-bsd*) fmt=aout em=dynix bfd_gas=yes ;;
i386-*-bsd*) fmt=aout em=386bsd ;;
i386-*-netbsd0.8) fmt=aout em=386bsd ;;
i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
+ i386-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes;;
i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
- i386-*-linux*coff*) fmt=coff em=linux
- targ=i386coff ;;
- i386-*-linux*) fmt=elf em=linux ;;
- i386-*-lynxos*) fmt=coff targ=i386coff
- em=lynx ;;
- i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
+ i386-*-linux*coff*) fmt=coff em=linux ;;
+ i386-*-linux-gnu*) fmt=elf em=linux ;;
+ i386-*-lynxos*) fmt=coff em=lynx ;;
+ i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
fmt=elf ;;
- i386-*-sco*elf*) fmt=elf targ=sco5 ;;
- i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
- fmt=coff targ=i386coff ;;
+ i386-*-freebsdelf*) fmt=elf ;;
+ i386-*-freebsd*) fmt=aout em=386bsd ;;
+ i386-*-coff | i386-*-sysv* | i386-*-sco3.2v5*coff | i386-*-isc*)
+ fmt=coff ;;
+ i386-*-sco3.2v5*) fmt=elf
+ if test ${this_target} = $target; then
+ cat >> confdefs.h <<\EOF
+#define SCO_ELF 1
+EOF
+
+ fi
+ ;;
+ i386-*-sco3.2*) fmt=coff ;;
i386-*-vsta) fmt=aout ;;
- i386-*-go32) fmt=coff targ=i386coff ;;
+ i386-*-msdosdjgpp* | i386-*-go32* | i386-go32-rtems*)
+ fmt=coff em=go32;;
+ i386-*-rtems*) fmt=coff ;;
i386-*-gnu*) fmt=elf ;;
i386-*-mach*)
fmt=aout em=mach bfd_gas=yes ;;
i386-*-msdos*) fmt=aout ;;
i386-*-moss*) fmt=elf ;;
- i386-*-pe) fmt=coff targ=i386coff em=pe ;;
- i386-*-cygwin32) fmt=coff targ=i386coff em=pe ;;
- i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
+ i386-*-pe) fmt=coff em=pe ;;
+ i386-*-cygwin32*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-mingw32*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-*nt*) fmt=coff em=pe ;;
i960-*-bout) fmt=bout ;;
- i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
+ i960-*-coff) fmt=coff em=ic960 ;;
+ i960-*-rtems*) fmt=coff em=ic960 ;;
i960-*-nindy*) fmt=bout ;;
i960-*-vxworks4*) fmt=bout ;;
i960-*-vxworks5.0) fmt=bout ;;
- i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
+ i960-*-vxworks5.*) fmt=coff em=ic960 ;;
i960-*-vxworks*) fmt=bout ;;
+ m32r-*-*) fmt=elf bfd_gas=yes ;;
+
m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
fmt=aout em=sun3 ;;
- m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
- m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
- m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
- m68k-*-sysv4 | m68k-*-elf) # must be before -sysv*
- fmt=elf ;;
- m68k-*-coff | m68k-*-sysv*)
- fmt=coff targ=m68kcoff ;;
+ m68k-motorola-sysv*) fmt=coff em=delta ;;
+ m68k-bull-sysv3*) fmt=coff em=dpx2 ;;
+ m68k-apollo-*) fmt=coff em=apollo ;;
+ m68k-*-sysv4*) # must be before -sysv*
+ fmt=elf em=svr4 ;;
+ m68k-*-elf*) fmt=elf ;;
+ m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
+ fmt=coff ;;
m68k-*-hpux*) fmt=hp300 em=hp300 ;;
m68k-*-linux*aout*) fmt=aout em=linux ;;
- m68k-*-linux*) fmt=elf em=linux ;;
- m68k-*-lynxos*) fmt=coff targ=m68kcoff
- em=lynx ;;
+ m68k-*-linux-gnu*) fmt=elf em=linux ;;
+ m68k-*-lynxos*) fmt=coff em=lynx ;;
m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
- m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
+ m68k-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+ m68k-apple-aux*) fmt=coff em=aux ;;
m68k-*-psos*) fmt=elf em=psos;;
- m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
- m88k-*-coff*) fmt=coff targ=m88kcoff ;;
+ m88k-motorola-sysv3*) fmt=coff em=delt88 ;;
+ m88k-*-coff*) fmt=coff ;;
# don't change em like *-*-bsd does
- mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
- mips-dec-bsd*) fmt=aout targ=mips-lit ;;
- mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
+ mips-dec-netbsd*) fmt=elf endian=little ;;
+ mips-dec-openbsd*) fmt=elf endian=little ;;
+ mips-dec-bsd*) fmt=aout ;;
+ mips-sony-bsd*) fmt=ecoff ;;
mips-*-bsd*) { echo "configure: error: Unknown vendor for mips-bsd configuration." 1>&2; exit 1; } ;;
- mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
- mips-*-ecoff*) fmt=ecoff
- case "$endian" in
- big) targ=mips-big ;;
- *) targ=mips-lit ;;
- esac
- ;;
- mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
- mips-*-gnu*) fmt=aout
- case "$endian" in
- big) targ=mips-big ;;
- *) targ=mips-lit ;;
- esac
- ;;
- mips-*-irix5*) fmt=elf targ=mips-big ;;
- mips-*-irix*) fmt=ecoff targ=mips-big ;;
- mips-*-riscos*) fmt=ecoff targ=mips-big ;;
- mips-*-sysv*) fmt=ecoff targ=mips-big ;;
- mips-*-elf*) fmt=elf
- case "$endian" in
- big) targ=mips-big ;;
- *) targ=mips-lit ;;
- esac
- ;;
+ mips-*-ultrix*) fmt=ecoff endian=little ;;
+ mips-*-osf*) fmt=ecoff endian=little ;;
+ mips-*-ecoff*) fmt=ecoff ;;
+ mips-*-ecoff*) fmt=ecoff ;;
+ mips-*-irix6*) fmt=elf ;;
+ mips-*-irix5*) fmt=elf ;;
+ mips-*-irix*) fmt=ecoff ;;
+ mips-*-lnews*) fmt=ecoff em=lnews ;;
+ mips-*-riscos*) fmt=ecoff ;;
+ mips-*-sysv*) fmt=ecoff ;;
+ mips-*-elf* | mips-*-rtems* | mips-*-linux-gnu* | mips-*-gnu* | mips-*-openbsd*)
+ fmt=elf ;;
+ mn10200-*-*) fmt=elf bfd_gas=yes ;;
+ mn10300-*-*) fmt=elf bfd_gas=yes ;;
ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
- fmt=coff em=pe
- case "$endian" in
- big) targ=ppc-big ;;
- *) targ=ppc-lit ;;
- esac
- ;;
+ fmt=coff em=pe ;;
ppc-*-aix*) fmt=coff ;;
- ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
- fmt=elf
+ ppc-*-beos*) fmt=coff ;;
+ ppc-*-*bsd* | ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
+ fmt=elf ;;
+ ppc-*-linux-gnu*) fmt=elf
case "$endian" in
- big) targ=ppc-big ;;
- *) targ=ppc-lit ;;
+ big) ;;
+ *) { echo "configure: error: GNU/Linux must be configured big endian" 1>&2; exit 1; } ;;
esac
;;
+ ppc-*-solaris*) fmt=elf
+ if test ${this_target} = $target; then
+ cat >> confdefs.h <<\EOF
+#define TARGET_SOLARIS_COMMENT 1
+EOF
+
+ fi
+ if test x${endian} = xbig; then
+ { echo "configure: error: Solaris must be configured little endian" 1>&2; exit 1; }
+ fi
+ ;;
+ ppc-*-rtems*) fmt=elf ;;
ppc-*-macos* | ppc-*-mpw*)
fmt=coff em=macos ;;
ppc-*-netware*) fmt=elf em=ppcnw ;;
- sh-*-coff) fmt=coff ;;
-
-# start-sanitize-rce
- rce-*-aout) fmt=aout ;;
-# end-sanitize-rce
+ sh-*-elf*) fmt=elf ;;
+ sh-*-coff*) fmt=coff ;;
+ sh-*-rtems*) fmt=elf ;;
ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
+ ns32k-pc532-openbsd*) fmt=aout em=nbsd532 ;;
+ sparc-*-rtems*) fmt=aout ;;
sparc-*-sunos4*) fmt=aout em=sun3 ;;
- sparc-*-aout | sparc*-*-vxworks)
- fmt=aout ;;
+ sparc-*-aout | sparc*-*-vxworks*)
+ fmt=aout em=sparcaout ;;
sparc-*-coff) fmt=coff ;;
+ sparc-*-linux*aout*) fmt=aout em=linux ;;
+ sparc-*-linux-gnu*) fmt=elf em=linux ;;
sparc-*-lynxos*) fmt=coff em=lynx ;;
sparc-fujitsu-none) fmt=aout ;;
- sparc-*-elf | sparc-*-solaris*)
+ sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
fmt=elf ;;
sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+ sparc-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+ tic30-*-*aout*) fmt=aout bfd_gas=yes ;;
+ tic30-*-*coff*) fmt=coff bfd_gas=yes ;;
+# start-sanitize-tic80
+ tic80-*-*) fmt=coff ;;
+# end-sanitize-tic80
+
+# start-sanitize-sky
+ dvp-*-*) fmt=elf bfd_gas=yes ;;
+# end-sanitize-sky
+
+ v850-*-*) fmt=elf bfd_gas=yes ;;
+
+# start-sanitize-v850e
+ v850e-*-*) fmt=elf bfd_gas=yes ;;
+ v850ea-*-*) fmt=elf bfd_gas=yes ;;
+# end-sanitize-v850e
vax-*-bsd* | vax-*-ultrix*)
fmt=aout ;;
vax-*-vms) fmt=vms ;;
esac
case ${cpu_type}-${fmt} in
+ alpha*-*) bfd_gas=yes ;;
arm-*) bfd_gas=yes ;;
# not yet
# i386-aout) bfd_gas=preferred ;;
# do we need the opcodes library?
case ${cpu_type} in
- alpha | vax | i386)
+ vax | i386 | tic30)
;;
*)
need_opcodes=yes
- if test "${shared}" = "true"; then
+
+ case "${enable_shared}" in
+ yes) shared_opcodes=true ;;
+ *opcodes*) shared_opcodes=true ;;
+ *) shared_opcodes=false ;;
+ esac
+ if test "${shared_opcodes}" = "true"; then
# A shared libopcodes must be linked against libbfd.
need_bfd=yes
fi
;;
esac
- test -n "$want_sparc_v9" && cat >> confdefs.h <<\EOF
-#define SPARC_V9 1
+ case ${cpu_type} in
+ m32r)
+ case ${extra_objects} in
+ *cgen.o*) ;;
+ *) extra_objects="$extra_objects cgen.o"
+ cat >> confdefs.h <<\EOF
+#define USING_CGEN 1
EOF
+ ;;
+ esac
+ ;;
- case ${cpu}-${vendor}-${os} in
- sparc64-*-elf*) cat >> confdefs.h <<\EOF
-#define SPARC_ARCH64 1
-EOF
- ;;
- esac
-
- case ${cpu_type} in
m68k)
case ${extra_objects} in
*m68k-parse.o*) ;;
*) extra_objects="$extra_objects m68k-parse.o" ;;
esac
;;
+
+ mips)
+ echo ${extra_objects} | grep -s "itbl-parse.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects itbl-parse.o"
+ fi
+
+ echo ${extra_objects} | grep -s "itbl-lex.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects itbl-lex.o"
+ fi
+
+ echo ${extra_objects} | grep -s "itbl-ops.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects itbl-ops.o"
+ fi
+ ;;
+
+ sparc)
+ if test $this_target = $target ; then
+ cat >> confdefs.h <<EOF
+#define DEFAULT_ARCH "${arch}"
+EOF
+
+ fi
+ ;;
+
+ *)
+ ;;
esac
# See if we really can support this configuration with the emulation code.
if test $this_target = $target ; then
primary_bfd_gas=$bfd_gas
obj_format=$fmt
- gas_target=$targ
te_file=$em
if test $bfd_gas = no ; then
case ${generic_target}-${fmt} in
mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
+ mips-*-linux-gnu*-*) case "$endian" in
+ big) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
+ *) emulation="mipslelf mipsbelf mipself mipslecoff mipsbecoff mipsecoff" ;;
+ esac ;;
+ mips-*-lnews*-ecoff) ;;
mips-*-*-ecoff) case "$endian" in
big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
*) emulation="mipslecoff mipsbecoff mipsecoff" ;;
mips-*-*-elf) case "$endian" in
big) emulation="mipsbelf mipslelf mipself" ;;
*) emulation="mipslelf mipsbelf mipself" ;;
+ # Uncommenting the next line will turn on support for i386 COFF
+ # in any i386 ELF configuration. This probably doesn't work
+ # correctly.
+ # i386-*-*-elf) emulation="i386coff i386elf" ;;
esac ;;
esac
{ echo "configure: error: GAS does not have support for object file format ${obj_format}" 1>&2; exit 1; }
fi
-# and target makefile frag
-
-target_frag=${srcdir}/config/${gas_target}.mt
-if test ! -r ${target_frag}; then
- target_frag=/dev/null # ick! but subst_file can't be conditionalized
-fi
-
-
case ${user_bfd_gas}-${primary_bfd_gas} in
yes-yes | no-no)
# We didn't override user's choice.
fmt=elf file=mipself ;;
mipsbecoff | mipslecoff)
fmt=ecoff file=mipsecoff ;;
+ i386coff)
+ fmt=coff file=i386coff ;;
+ i386elf)
+ fmt=elf file=i386elf ;;
esac
formats="$formats $fmt"
emfiles="$emfiles e-$file.o"
EOF
-files="config/tc-${target_cpu_type}.c config/tc-${target_cpu_type}.h \
- config/obj-${obj_format}.h config/obj-${obj_format}.c \
- config/te-${te_file}.h config/atof-${atof}.c \
- $extra_files"
-links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
- $extra_links"
-
case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
yes-*-coff) need_bfd=yes ;;
no-*-coff) need_bfd=yes
-
case "${primary_bfd_gas}" in
yes) cat >> confdefs.h <<\EOF
#define BFD_ASSEMBLER 1
# do we need the opcodes library?
case "${need_opcodes}" in
- yes)
- OPCODES_DEP=../opcodes/libopcodes.a
- OPCODES_LIB='-L../opcodes -lopcodes'
-
- # We need to handle some special cases if opcodes was built shared.
- if test "${shared}" = "true"; then
- case "${host}" in
- *-*-sunos*)
- # On SunOS, we must link against the name we are going to install,
- # not -lbfd, since SunOS does not support SONAME.
- OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
- ;;
- esac
- fi
- ;;
+yes)
+ OPCODES_LIB=../opcodes/libopcodes.la
+ ;;
esac
-
-
case "${need_bfd}" in
- yes)
- BFDDEP=../bfd/libbfd.a
- BFDLIB='-L../bfd -lbfd'
- ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
-
- # We need to handle some special cases if BFD was built shared.
- if test "${shared}" = "true"; then
- case "${host}" in
- *-*-sunos*)
- # On SunOS, we must link against the name we are going to install,
- # not -lbfd, since SunOS does not support SONAME.
- BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
- ;;
- esac
- fi
- ;;
+yes)
+ BFDLIB=../bfd/libbfd.la
+ ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
+ ;;
esac
+
+
cat >> confdefs.h <<EOF
#define TARGET_ALIAS "${target_alias}"
EOF
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2039: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2068: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:2116: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext <<EOF
+#line 2126 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+if { (eval echo configure:2130: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:2150: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:2155: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1404: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2164: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- if test "${CFLAGS+set}" != set; then
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
+ ac_test_CFLAGS="${CFLAGS+set}"
+ ac_save_CFLAGS="$CFLAGS"
+ CFLAGS=
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:2179: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_gcc_g=yes
+ ac_cv_prog_cc_g=yes
else
- ac_cv_prog_gcc_g=no
+ ac_cv_prog_cc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
- if test $ac_cv_prog_gcc_g = yes; then
- CFLAGS="-g -O"
- else
- CFLAGS="-O"
- fi
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-O2"
fi
else
GCC=
test "${CFLAGS+set}" = set || CFLAGS="-g"
fi
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+
+for ac_prog in 'bison -y' byacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2212: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- for ac_prog in ginstall installbsd scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- # OSF/1 installbsd also uses dspmsg, but is usable.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
- ;;
- esac
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_YACC="$ac_prog"
+ break
+ fi
done
IFS="$ac_save_ifs"
-
fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
- fi
fi
-echo "$ac_t""$INSTALL" 1>&6
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+ echo "$ac_t""$YACC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+# Extract the first word of "flex", so it can be a program name with args.
+set dummy flex; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2244: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="flex"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+if test -z "$LEXLIB"
+then
+ case "$LEX" in
+ flex*) ac_lib=fl ;;
+ *) ac_lib=l ;;
+ esac
+ echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
+echo "configure:2277: checking for yywrap in -l$ac_lib" >&5
+ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$ac_lib $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2285 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char yywrap();
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+int main() {
+yywrap()
+; return 0; }
+EOF
+if { (eval echo configure:2296: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LEXLIB="-l$ac_lib"
+else
+ echo "$ac_t""no" 1>&6
+fi
+fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:2319: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1516 "configure"
+#line 2334 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1522: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2340: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1531 "configure"
+#line 2351 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1537: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2357: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
fi
echo "$ac_t""$CPP" 1>&6
+echo $ac_n "checking lex output file root""... $ac_c" 1>&6
+echo "configure:2380: checking lex output file root" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # The minimal lex program is just a single line: %%. But some broken lexes
+# (Solaris, I think it was) want two %% lines, so accommodate them.
+echo '%%
+%%' | $LEX
+if test -f lex.yy.c; then
+ ac_cv_prog_lex_root=lex.yy
+elif test -f lexyy.c; then
+ ac_cv_prog_lex_root=lexyy
+else
+ { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; }
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
+LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
+
+echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
+echo "configure:2401: checking whether yytext is a pointer" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # POSIX says lex can declare yytext either as a pointer or an array; the
+# default is implementation-dependent. Figure out which it is, since
+# not all implementations provide the %pointer and %array declarations.
+ac_cv_prog_lex_yytext_pointer=no
+echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
+ac_save_LIBS="$LIBS"
+LIBS="$LIBS $LEXLIB"
+cat > conftest.$ac_ext <<EOF
+#line 2413 "configure"
+#include "confdefs.h"
+`cat $LEX_OUTPUT_ROOT.c`
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ ac_cv_prog_lex_yytext_pointer=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+rm -f "${LEX_OUTPUT_ROOT}.c"
+
+fi
+
+echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6
+if test $ac_cv_prog_lex_yytext_pointer = yes; then
+ cat >> confdefs.h <<\EOF
+#define YYTEXT_POINTER 1
+EOF
+
+fi
+
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:2443: checking whether to enable maintainer-specific portions of Makefiles" >&5
+ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINT=
+ else
+ MAINT='#M#'
+ fi
+
+
+echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
+echo "configure:2461: checking for Cygwin32 environment" >&5
+if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2466 "configure"
+#include "confdefs.h"
+
+int main() {
+return __CYGWIN32__;
+; return 0; }
+EOF
+if { (eval echo configure:2473: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ am_cv_cygwin32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ am_cv_cygwin32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_cygwin32" 1>&6
+CYGWIN32=
+test "$am_cv_cygwin32" = yes && CYGWIN32=yes
+echo $ac_n "checking for Mingw32 environment""... $ac_c" 1>&6
+echo "configure:2490: checking for Mingw32 environment" >&5
+if eval "test \"`echo '$''{'am_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2495 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:2502: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ am_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ am_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_mingw32" 1>&6
+MINGW32=
+test "$am_cv_mingw32" = yes && MINGW32=yes
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:2521: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+if test "$CYGWIN32" = yes -o "$MINGW32" = yes; then
+am_cv_exeext=.exe
+else
+cat > am_c_test.c << 'EOF'
+int main() {
+/* Nothing needed here */
+}
+EOF
+${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
+am_cv_exeext=`echo am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
+rm -f am_c_test*
+fi
+
+test x"${am_cv_exeext}" = x && am_cv_exeext=no
+fi
+EXEEXT=""
+test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
+echo "$ac_t""${am_cv_exeext}" 1>&6
+
+
for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h
do
-ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2550: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1565 "configure"
+#line 2555 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1570: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2560: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
+echo "configure:2590: checking whether compiling a cross-assembler" >&5
if test "${host}" = "${target}"; then
cross_gas=no
else
fi
echo "$ac_t""$cross_gas" 1>&6
-# If we cannot run a trivial program, we must be cross compiling.
-echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
-if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_c_cross=yes
-else
-cat > conftest.$ac_ext <<EOF
-#line 1618 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-{ (eval echo configure:1622: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
-if test -s conftest && (./conftest; exit) 2>/dev/null; then
- ac_cv_c_cross=no
-else
- ac_cv_c_cross=yes
-fi
-fi
-rm -fr conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_cross" 1>&6
-cross_compiling=$ac_cv_c_cross
-
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
+echo "configure:2605: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1642 "configure"
+#line 2610 "configure"
#include "confdefs.h"
#include <alloca.h>
-int main() { return 0; }
-int t() {
+int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:1650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2617: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_header_alloca_h=no
fi
rm -f conftest*
-
fi
echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-if eval "test \"`echo '$''{'ac_cv_func_alloca'+set}'`\" = set"; then
+echo "configure:2638: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1674 "configure"
+#line 2643 "configure"
#include "confdefs.h"
#ifdef __GNUC__
# endif
#endif
-int main() { return 0; }
-int t() {
+int main() {
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:1698: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2666: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
- ac_cv_func_alloca=yes
+ ac_cv_func_alloca_works=yes
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
- ac_cv_func_alloca=no
+ ac_cv_func_alloca_works=no
fi
rm -f conftest*
-
fi
-echo "$ac_t""$ac_cv_func_alloca" 1>&6
-if test $ac_cv_func_alloca = yes; then
+echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
+if test $ac_cv_func_alloca_works = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_ALLOCA 1
EOF
fi
-if test $ac_cv_func_alloca = no; then
+if test $ac_cv_func_alloca_works = no; then
# The SVR3 libPW and SVR4 libucb both contain incompatible functions
# that cause trouble. Some versions do not even contain alloca or
# contain a buggy version. If you still want to use their alloca,
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:2698: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1733 "configure"
+#line 2703 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2728: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1762 "configure"
+#line 2733 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char $ac_func();
-int main() { return 0; }
-int t() {
+int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
; return 0; }
EOF
-if { (eval echo configure:1784: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
-
fi
+
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<EOF
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:2783: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_c_stack_direction=0
else
-cat > conftest.$ac_ext <<EOF
-#line 1816 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 2791 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-{ (eval echo configure:1835: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
-if test -s conftest && (./conftest; exit) 2>/dev/null; then
+if { (eval echo configure:2810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
ac_cv_c_stack_direction=1
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
ac_cv_c_stack_direction=-1
fi
-fi
rm -fr conftest*
fi
+fi
+
echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
cat >> confdefs.h <<EOF
#define STACK_DIRECTION $ac_cv_c_stack_direction
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:2832: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 1859 "configure"
+#line 2839 "configure"
#include "confdefs.h"
-int main() { return 0; }
-int t() {
+int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:1867: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2846: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
rm -f conftest*
-
done
fi
for ac_func in unlink remove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2876: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1899 "configure"
+#line 2881 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char $ac_func();
-int main() { return 0; }
-int t() {
+int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
; return 0; }
EOF
-if { (eval echo configure:1921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
-
fi
+
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2933: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1952 "configure"
+#line 2938 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char $ac_func();
-int main() { return 0; }
-int t() {
+int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
; return 0; }
EOF
-if { (eval echo configure:1974: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
-
fi
+
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
+echo "configure:2990: checking for working assert macro" >&5
if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2005 "configure"
+#line 2995 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
-int main() { return 0; }
-int t() {
+int main() {
/* check for requoting problems */
static int a, b, c, d;
; return 0; }
EOF
-if { (eval echo configure:2022: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:3011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_assert_ok=yes
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
gas_cv_assert_ok=no
fi
rm -f conftest*
-
fi
echo "$ac_t""$gas_cv_assert_ok" 1>&6
test $gas_cv_assert_ok = yes || cat >> confdefs.h <<\EOF
#endif
#ifdef HAVE_STRING_H
#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
#endif
#ifdef HAVE_STDLIB_H
#include <stdlib.h>
#endif
"
+echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
+echo "configure:3052: checking whether declaration is required for strstr" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3057 "configure"
+#include "confdefs.h"
+$gas_test_headers
+int main() {
+
+typedef char *(*f)();
+f x;
+x = (f) strstr;
+
+; return 0; }
+EOF
+if { (eval echo configure:3068: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ gas_cv_decl_needed_strstr=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gas_cv_decl_needed_strstr=yes
+fi
+rm -f conftest*
+fi
+echo "$ac_t""$gas_cv_decl_needed_strstr" 1>&6
+test $gas_cv_decl_needed_strstr = no || {
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_STRSTR 1
+EOF
+
+}
+
+
echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
+echo "configure:3089: checking whether declaration is required for malloc" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2062 "configure"
+#line 3094 "configure"
#include "confdefs.h"
$gas_test_headers
-int main() { return 0; }
-int t() {
+int main() {
typedef char *(*f)();
f x;
; return 0; }
EOF
-if { (eval echo configure:2074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:3105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_malloc=no
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
gas_cv_decl_needed_malloc=yes
fi
rm -f conftest*
-
fi
echo "$ac_t""$gas_cv_decl_needed_malloc" 1>&6
test $gas_cv_decl_needed_malloc = no || {
echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
+echo "configure:3126: checking whether declaration is required for free" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2098 "configure"
+#line 3131 "configure"
#include "confdefs.h"
$gas_test_headers
-int main() { return 0; }
-int t() {
+int main() {
typedef void (*f)();
f x;
; return 0; }
EOF
-if { (eval echo configure:2110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:3142: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_free=no
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
gas_cv_decl_needed_free=yes
fi
rm -f conftest*
-
fi
echo "$ac_t""$gas_cv_decl_needed_free" 1>&6
test $gas_cv_decl_needed_free = no || {
}
+echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
+echo "configure:3163: checking whether declaration is required for sbrk" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3168 "configure"
+#include "confdefs.h"
+$gas_test_headers
+int main() {
+
+typedef char *(*f)();
+f x;
+x = (f) sbrk;
+
+; return 0; }
+EOF
+if { (eval echo configure:3179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ gas_cv_decl_needed_sbrk=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gas_cv_decl_needed_sbrk=yes
+fi
+rm -f conftest*
+fi
+echo "$ac_t""$gas_cv_decl_needed_sbrk" 1>&6
+test $gas_cv_decl_needed_sbrk = no || {
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_SBRK 1
+EOF
+
+}
+
+
# Does errno.h declare errno, or do we have to add a separate declaration
# for it?
echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
+echo "configure:3203: checking whether declaration is required for errno" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2137 "configure"
+#line 3208 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
#include <errno.h>
#endif
-int main() { return 0; }
-int t() {
+int main() {
typedef int f;
f x;
; return 0; }
EOF
-if { (eval echo configure:2153: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:3223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_errno=no
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
gas_cv_decl_needed_errno=yes
fi
rm -f conftest*
-
fi
echo "$ac_t""$gas_cv_decl_needed_errno" 1>&6
test $gas_cv_decl_needed_errno = no || {
}
-HLDFLAGS=
-RPATH_ENVVAR=LD_LIBRARY_PATH
-# If we have shared libraries, try to set rpath reasonably.
-if test "${shared}" = "true"; then
- case "${host}" in
- *-*-hpux*)
- HLDFLAGS='-Wl,+s,+b,$(libdir)'
- RPATH_ENVVAR=SHLIB_PATH
- ;;
- *-*-irix5*)
- HLDFLAGS='-Wl,-rpath,$(libdir)'
- ;;
- *-*-linux*aout*)
- ;;
- *-*-linux*)
- HLDFLAGS='-Wl,-rpath,$(libdir)'
- ;;
- *-*-sysv4* | *-*-solaris*)
- HLDFLAGS='-R $(libdir)'
- ;;
- esac
-fi
-
-# On SunOS, if the linker supports the -rpath option, use it to
-# prevent ../bfd and ../opcodes from being included in the run time
-# search path.
-case "${host}" in
- *-*-sunos*)
- echo 'main () { }' > conftest.c
- ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
- if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
- :
- elif grep 'No such file' conftest.t >/dev/null 2>&1; then
- :
- elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
- :
- elif test "${shared}" = "true"; then
- HLDFLAGS='-Wl,-rpath=$(libdir)'
- else
- HLDFLAGS='-Wl,-rpath='
- fi
- rm -f conftest.t conftest.c conftest
- ;;
-esac
-
trap '' 1 2 15
# --recheck option to rerun configure.
#
EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
- >> confcache
+ case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.8"
+ echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile doc/Makefile .gdbinit:gdbinit.in conf" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile doc/Makefile .gdbinit:gdbinit.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
+s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
-/@target_frag@/r $target_frag
-s%@target_frag@%%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@PACKAGE@%$PACKAGE%g
+s%@VERSION@%$VERSION%g
+s%@ACLOCAL@%$ACLOCAL%g
+s%@AUTOCONF@%$AUTOCONF%g
+s%@AUTOMAKE@%$AUTOMAKE%g
+s%@AUTOHEADER@%$AUTOHEADER%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@RANLIB@%$RANLIB%g
+s%@CC@%$CC%g
+s%@LD@%$LD%g
+s%@NM@%$NM%g
+s%@LN_S@%$LN_S%g
+s%@LIBTOOL@%$LIBTOOL%g
s%@extra_objects@%$extra_objects%g
s%@target_cpu_type@%$target_cpu_type%g
s%@obj_format@%$obj_format%g
+s%@te_file@%$te_file%g
s%@atof@%$atof%g
-s%@OPCODES_DEP@%$OPCODES_DEP%g
-s%@OPCODES_LIB@%$OPCODES_LIB%g
-s%@BFDDEP@%$BFDDEP%g
s%@BFDLIB@%$BFDLIB%g
+s%@OPCODES_LIB@%$OPCODES_LIB%g
s%@ALL_OBJ_DEPS@%$ALL_OBJ_DEPS%g
-s%@CC@%$CC%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@YACC@%$YACC%g
+s%@LEX@%$LEX%g
+s%@LEXLIB@%$LEXLIB%g
s%@CPP@%$CPP%g
+s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
+s%@MAINT@%$MAINT%g
+s%@EXEEXT@%$EXEEXT%g
s%@ALLOCA@%$ALLOCA%g
-s%@HLDFLAGS@%$HLDFLAGS%g
-s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
CEOF
EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+ else
+ sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+ fi
+ if test ! -s conftest.s$ac_file; then
+ ac_more_lines=false
+ rm -f conftest.s$ac_file
+ else
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f conftest.s$ac_file"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+ fi
+ ac_file=`expr $ac_file + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ fi
+done
+if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+fi
+EOF
+
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile .gdbinit:gdbinit.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile]", defaulting infile="outfile.in".
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust relative srcdir, etc. for subdirectories.
+ # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
+
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
+
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
-" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
-rm -f conftest.subs
+rm -f conftest.s*
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-CONFIG_HEADERS=${CONFIG_HEADERS-"conf"}
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+ CONFIG_HEADERS="config.h:config.in"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile]", defaulting infile="outfile.in".
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- cp $ac_given_srcdir/$ac_file_in conftest.in
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ cat $ac_file_inputs > conftest.in
EOF
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) \(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
-# Maximum number of lines to put in a single here document.
-ac_max_here_lines=12
rm -f conftest.tail
while :
echo "$ac_file is unchanged"
rm -f conftest.h
else
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ fi
rm -f $ac_file
mv conftest.h $ac_file
fi
fi; done
EOF
-
cat >> $CONFIG_STATUS <<EOF
-ac_sources="$files"
-ac_dests="$links"
-EOF
+target_cpu_type=${target_cpu_type}
+ obj_format=${obj_format}
+ te_file=${te_file}
+EOF
cat >> $CONFIG_STATUS <<\EOF
-srcdir=$ac_given_srcdir
-while test -n "$ac_sources"; do
- set $ac_dests; ac_dest=$1; shift; ac_dests=$*
- set $ac_sources; ac_source=$1; shift; ac_sources=$*
-
- echo "linking $srcdir/$ac_source to $ac_dest"
-
- if test ! -r $srcdir/$ac_source; then
- { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
- fi
- rm -f $ac_dest
-
- # Make relative symlinks.
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
- # The dest file is in a subdirectory.
- test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
- ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
- # A "../" for each directory in $ac_dest_dir_suffix.
- ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
- else
- ac_dest_dir_suffix= ac_dots=
- fi
-
- case "$srcdir" in
- [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
- *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
- esac
-
- # Make a symlink if possible; otherwise try a hard link.
- if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
- ln $srcdir/$ac_source $ac_dest; then :
- else
- { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
- fi
-done
-
-
+test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
+rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h
+ echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h
+ echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h
+ echo '#include "te-'"${te_file}"'.h"' > targ-env.h
+ echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h
+ case ${target_cpu_type} in
+ m32r) echo '#include "opcodes/'"${target_cpu_type}"'-opc.h"' > cgen-opc.h ;;
+ esac
exit 0
EOF
chmod +x $CONFIG_STATUS
projects / deliverable / binutils-gdb.git / blobdiff