--enable-shared[=PKGS] build shared libraries [default=yes]"
ac_help="$ac_help
--enable-static[=PKGS] build static libraries [default=yes]"
+ac_help="$ac_help
+ --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+ac_help="$ac_help
+ --disable-libtool-lock avoid locking (might break parallel builds)"
+ac_help="$ac_help
+ --with-pic try to use only PIC/non-PIC objects [default=use both]"
ac_help="$ac_help
--enable-bfd-assembler use BFD back end for writing object files"
ac_help="$ac_help
targets alternative target configurations besides the primary"
ac_help="$ac_help
--enable-commonbfdlib build shared BFD/opcodes/libiberty library"
+ac_help="$ac_help
+ --enable-build-warnings Enable build-time compiler warnings if gcc is used"
ac_help="$ac_help
--disable-nls do not use Native Language Support"
ac_help="$ac_help
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
ac_n= ac_c='\c' ac_t=
fi
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:563: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 568 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:579: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:596: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 601 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:608: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
ac_aux_dir=
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:592: checking host system type" >&5
+echo "configure:673: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:613: checking target system type" >&5
+echo "configure:694: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:631: checking build system type" >&5
+echo "configure:712: checking build system type" >&5
build_alias=$build
case "$build_alias" in
NONENONEs,x,x, &&
program_prefix=${target_alias}-
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:666: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:737: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
- ;;
- esac
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
done
- IFS="$ac_save_IFS"
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
- fi
+ IFS="$ac_save_ifs"
fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:719: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftestfile`
- fi
- if test "$*" != "X $srcdir/configure conftestfile" \
- && test "$*" != "X conftestfile $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
- fi
-
- test "$2" = conftestfile
- )
-then
- # Ok.
- :
-else
- { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
- program_transform_name=
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
else
- # Double any \ or $. echo might interpret backslashes.
- cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
- rm -f conftestsed
+ echo "$ac_t""no" 1>&6
fi
-test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:776: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:767: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftestmake <<\EOF
-all:
- @echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
else
- eval ac_cv_prog_make_${ac_make}_set=no
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
fi
-rm -f conftestmake
fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- SET_MAKE=
-else
- echo "$ac_t""no" 1>&6
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-
-PACKAGE=gas
-
-VERSION=2.9.4
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:822: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
- ACLOCAL=aclocal
- echo "$ac_t""found" 1>&6
-else
- ACLOCAL="$missing_dir/missing aclocal"
- echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:835: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
- AUTOCONF=autoconf
- echo "$ac_t""found" 1>&6
-else
- AUTOCONF="$missing_dir/missing autoconf"
- echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:848: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
- AUTOMAKE=automake
- echo "$ac_t""found" 1>&6
-else
- AUTOMAKE="$missing_dir/missing automake"
- echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:861: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
- AUTOHEADER=autoheader
- echo "$ac_t""found" 1>&6
-else
- AUTOHEADER="$missing_dir/missing autoheader"
- echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:874: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
- MAKEINFO=makeinfo
- echo "$ac_t""found" 1>&6
-else
- MAKEINFO="$missing_dir/missing makeinfo"
- echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-else
- enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
- enableval="$enable_static"
- p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-else
- enable_static=yes
-fi
-
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:937: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:967: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:997: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_prog_rejected=no
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# -gt 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- set dummy "$ac_dir/$ac_word" "$@"
- shift
- ac_cv_prog_CC="$@"
- fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1048: checking for $ac_word" >&5
+echo "configure:818: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1080: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:850: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1091 "configure"
+#line 861 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1096: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:866: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1122: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:892: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1127: checking whether we are using GNU C" >&5
+echo "configure:897: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1136: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:906: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1155: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:925: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
fi
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval="$with_gnu_ld"
- test "$withval" = no || with_gnu_ld=yes
+echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
+echo "configure:957: checking for POSIXized ISC" >&5
+if test -d /etc/conf/kconfig.d &&
+ grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
+then
+ echo "$ac_t""yes" 1>&6
+ ISC=yes # If later tests want to check for ISC.
+ cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
+
+ if test "$GCC" = yes; then
+ CC="$CC -posix"
+ else
+ CC="$CC -Xp"
+ fi
else
- with_gnu_ld=no
+ echo "$ac_t""no" 1>&6
+ ISC=
fi
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1199: checking for ld used by GCC" >&5
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
- /* | [A-Za-z]:\\*)
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
+BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:991: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:1044: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ if test "$*" != "X $srcdir/configure conftestfile" \
+ && test "$*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+ fi
+
+ test "$2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:1101: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+PACKAGE=gas
+
+VERSION=${BFD_VERSION}
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:1147: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+ ACLOCAL=aclocal
+ echo "$ac_t""found" 1>&6
+else
+ ACLOCAL="$missing_dir/missing aclocal"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:1160: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+ AUTOCONF=autoconf
+ echo "$ac_t""found" 1>&6
+else
+ AUTOCONF="$missing_dir/missing autoconf"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:1173: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+ AUTOMAKE=automake
+ echo "$ac_t""found" 1>&6
+else
+ AUTOMAKE="$missing_dir/missing automake"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:1186: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+ AUTOHEADER=autoheader
+ echo "$ac_t""found" 1>&6
+else
+ AUTOHEADER="$missing_dir/missing autoheader"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:1199: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+ MAKEINFO=makeinfo
+ echo "$ac_t""found" 1>&6
+else
+ MAKEINFO="$missing_dir/missing makeinfo"
+ echo "$ac_t""missing" 1>&6
+fi
+
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_shared=yes
+fi
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_static=yes
+fi
+
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_fast_install=yes
+fi
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+echo "configure:1294: checking for ld used by GCC" >&5
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1217: checking for GNU ld" >&5
+echo "configure:1324: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1220: checking for non-GNU ld" >&5
+echo "configure:1327: checking for non-GNU ld" >&5
+fi
+if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+echo "configure:1362: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ lt_cv_prog_gnu_ld=yes
+else
+ lt_cv_prog_gnu_ld=no
+fi
+fi
+
+echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1379: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+echo "configure:1391: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ else
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+
+NM="$lt_cv_path_NM"
+echo "$ac_t""$NM" 1>&6
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1429: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1450: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+ rhapsody* | darwin1.012)
+ lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
+ ;;
+ *) # Darwin 1.3 on
+ lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+ ;;
+ esac
+ ;;
+
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*|hpux11*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+irix5* | irix6*)
+ case $host_os in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case $host_cpu in
+ alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+ fi
+ ;;
+
+newsos6)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv5uw[78]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1614: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1620: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
+else
+ { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1640: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:1650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
fi
-if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1683: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
fi
+ break
fi
done
IFS="$ac_save_ifs"
-else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
fi
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- echo "$ac_t""$LD" 1>&6
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1256: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:1745: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1272: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$NM"; then
- # Let the user override the test.
- ac_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
- else
- ac_cv_path_NM="$ac_dir/nm"
+EOF
+ fi ;;
+ esac
fi
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
fi
-NM="$ac_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1307: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
- rm -f conftestdata
- ac_cv_prog_LN_S="ln -s"
-else
- ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
- echo "$ac_t""yes" 1>&6
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test $host != $build; then
- ac_tool_prefix=${host_alias}-
-else
- ac_tool_prefix=
+ else
+ MAGIC_CMD=:
+ fi
fi
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags=
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$host" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 1349 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1350: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- CFLAGS="$CFLAGS -belf"
;;
+esac
-*-*-cygwin*)
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1375: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+echo "configure:1816: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
+if test -z "$ac_cv_prog_RANLIB"; then
if test -n "$ac_tool_prefix"; then
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1407: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+echo "configure:1848: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="dlltool"
+ ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
- DLLTOOL="false"
+ RANLIB=":"
fi
fi
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1442: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+echo "configure:1883: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test -z "$ac_cv_prog_AS"; then
+if test -z "$ac_cv_prog_STRIP"; then
if test -n "$ac_tool_prefix"; then
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1474: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+echo "configure:1915: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="as"
+ ac_cv_prog_STRIP="strip"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
fi
fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
- AS="false"
+ STRIP=":"
+fi
+fi
+
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
fi
+
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 1982 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1983: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:2004: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ cat > conftest.$ac_ext <<EOF
+#line 2017 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2024: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
fi
+rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+fi
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
;;
+
esac
+
+# Save cache, so that ltconfig can load it
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
+
+
+
+
+
user_bfd_gas=
# Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
using_cgen=no
+build_warnings="-W -Wall"
+# Check whether --enable-build-warnings or --disable-build-warnings was given.
+if test "${enable_build_warnings+set}" = set; then
+ enableval="$enable_build_warnings"
+ case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting warning flags = $build_warnings" 6>&1
+fi
+fi
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
+ WARN_CFLAGS="${build_warnings}"
+fi
+
+
# Generate a header file
+# If we are on a DOS filesystem, we must use gdb.ini rather than
+# .gdbinit.
+GDBINIT=".gdbinit"
+case "${host}" in
+ *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-cygwin* | *-*-windows*)
+ GDBINIT="gdb.ini"
+ ;;
+esac
+
+
te_file=generic
# Makefile target for installing gas in $(tooldir)/bin.
install_tooldir=install-exec-tooldir
canon_targets=""
+all_targets=no
if test -n "$enable_targets" ; then
for t in `echo $enable_targets | sed 's/,/ /g'`; do
- result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $t 2>/dev/null`
+ if test $t = "all"; then
+ all_targets=yes
+ continue
+ fi
+ result=`$ac_config_sub $t 2>/dev/null`
if test -n "$result" ; then
canon_targets="$canon_targets $result"
# else
armb*) cpu_type=arm endian=little ;;
armv*l) cpu_type=arm endian=little ;;
armv*b) cpu_type=arm endian=big ;;
+ xscale*) cpu_type=arm endian=little ;;
strongarm*) cpu_type=arm endian=little ;;
thumb*) cpu_type=arm endian=little ;;
hppa*) cpu_type=hppa ;;
- i[456]86) cpu_type=i386 ;;
+ i[3456]86) cpu_type=i386 arch=i386;;
+ x86_64) cpu_type=i386 arch=x86_64;;
+ ia64) cpu_type=ia64 ;;
+ m6811|m6812|m68hc12) cpu_type=m68hc11 ;;
m680[012346]0) cpu_type=m68k ;;
m68008) cpu_type=m68k ;;
m683??) cpu_type=m68k ;;
m8*) cpu_type=m88k ;;
mips*el) cpu_type=mips endian=little ;;
mips*) cpu_type=mips endian=big ;;
+ pjl*) cpu_type=pj endian=little ;;
+ pj*) cpu_type=pj endian=big ;;
powerpcle*) cpu_type=ppc endian=little ;;
powerpc*) cpu_type=ppc endian=big ;;
rs6000*) cpu_type=ppc ;;
+ s390x*) cpu_type=s390 arch=s390x ;;
+ s390*) cpu_type=s390 arch=s390 ;;
sparclite*) cpu_type=sparc arch=sparclite ;;
sparclet*) cpu_type=sparc arch=sparclet ;;
sparc64*) cpu_type=sparc arch=v9-64 ;;
a29k-amd-udi) fmt=coff ;;
a29k-amd-ebmon) fmt=coff ;;
a29k-nyu-sym1) fmt=coff ;;
+ a29k-*-rtems*) fmt=coff ;;
a29k-*-vxworks*) fmt=coff ;;
alpha*-*-*vms*) fmt=evax ;;
arm-*-aout) fmt=aout ;;
arm-*-coff | thumb-*-coff) fmt=coff ;;
+ arm-*-rtems | thumb-*-rtems) fmt=elf ;;
arm-*-elf | thumb-*-elf) fmt=elf ;;
+ arm*-*-conix*) fmt=elf ;;
arm-*-linux*aout*) fmt=aout em=linux ;;
- arm-*-linux* | armv*-*-linux-gnu) fmt=elf em=linux ;;
- arm-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+ arm*-*-linux-gnu* | arm*-*-uclinux*)
+ fmt=elf em=linux ;;
+ arm-*-netbsd*) fmt=aout em=nbsd ;;
arm-*-oabi | thumb-*-oabi) fmt=elf ;;
arm-epoc-pe | thumb-epoc-pe) fmt=coff em=epoc-pe ;;
+ arm-*-wince) fmt=coff em=wince-pe ;;
arm-*-pe | thumb-*-pe) fmt=coff em=pe ;;
arm-*-riscix*) fmt=aout em=riscix ;;
+ arm-*-vxworks) fmt=coff ;;
+
+ avr-*-*) fmt=elf bfd_gas=yes ;;
+
+ cris-*-*) fmt=multi bfd_gas=yes ;;
d10v-*-*) fmt=elf bfd_gas=yes ;;
d30v-*-*) fmt=elf bfd_gas=yes ;;
fr30-*-*) fmt=elf bfd_gas=yes ;;
+ hppa-*-linux-gnu*) case ${cpu} in
+ hppa*64*)
+ fmt=elf em=hppalinux64;;
+ hppa*)
+ fmt=elf em=linux;;
+ esac ;;
hppa-*-*elf*) fmt=elf em=hppa ;;
hppa-*-lites*) fmt=elf em=hppa ;;
hppa-*-osf*) fmt=som em=hppa ;;
hppa-*-rtems*) fmt=elf em=hppa ;;
+ hppa-*-hpux11*) case ${cpu} in
+ hppa*64*)
+ fmt=elf em=hppa64 ;;
+ hppa*)
+ fmt=som em=hppa ;;
+ esac ;;
hppa-*-hpux*) fmt=som em=hppa ;;
hppa-*-mpeix*) fmt=som em=hppa ;;
hppa-*-bsd*) fmt=som em=hppa ;;
hppa-*-hiux*) fmt=som em=hppa ;;
+ h8300-*-rtems*) fmt=coff ;;
h8300-*-coff) fmt=coff ;;
+ h8500-*-rtems*) fmt=coff ;;
+ h8500-*-coff) fmt=coff ;;
+ i370-*-elf* | i370-*-linux*) fmt=elf ;;
i386-ibm-aix*) fmt=coff em=i386aix ;;
i386-sequent-bsd*) fmt=aout em=dynix bfd_gas=yes ;;
i386-*-beospe*) fmt=coff em=pe bfd_gas=yes ;;
i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
i386-*-linux*coff*) fmt=coff em=linux ;;
i386-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;;
+ x86_64-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;;
i386-*-lynxos*) fmt=coff em=lynx ;;
- i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
+ i386-*-sysv[45]* | i386-*-solaris* | i386-*-elf)
fmt=elf bfd_gas=yes ;;
- i386-*-freebsdelf*) fmt=elf bfd_gas=yes ;;
- i386-*-freebsd*) fmt=aout em=386bsd ;;
+ i386-*-freebsdaout* | i386-*-freebsd[12].* | i386-*-freebsd[12])
+ fmt=aout em=386bsd ;;
i386-*-coff | i386-*-sysv* | i386-*-sco3.2v5*coff | i386-*-isc*)
fmt=coff ;;
i386-*-sco3.2v5*) fmt=elf
i386-*-sco3.2*) fmt=coff ;;
i386-*-vsta) fmt=aout ;;
i386-*-msdosdjgpp* | i386-*-go32* | i386-go32-rtems*)
- fmt=coff em=go32;;
+ fmt=coff em=go32 bfd_gas=yes
+ cat >> confdefs.h <<\EOF
+#define STRICTCOFF 1
+EOF
+
+ ;;
+ i386-*-rtemself*) fmt=elf ;;
i386-*-rtems*) fmt=coff ;;
i386-*-gnu*) fmt=elf ;;
i386-*-mach*)
fmt=aout em=mach bfd_gas=yes ;;
i386-*-msdos*) fmt=aout ;;
i386-*-moss*) fmt=elf ;;
- i386-*-pe) fmt=coff em=pe ;;
+ i386-*-pe) fmt=coff em=pe bfd_gas=yes ;;
i386-*-cygwin*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-interix*) fmt=coff em=interix bfd_gas=yes ;;
i386-*-mingw32*) fmt=coff em=pe bfd_gas=yes ;;
- i386-*-*nt*) fmt=coff em=pe ;;
+ i386-*-*nt*) fmt=coff em=pe bfd_gas=yes ;;
+ i386-*-vxworks*) fmt=aout ;;
+ i386-*-chaos) fmt=elf ;;
+ i860-stardent-sysv4* | i860-stardent-elf*)
+ fmt=elf bfd_gas=yes endian=little
+ echo "configure: warning: GAS support for ${generic_target} is preliminary and a work in progress" 1>&2 ;;
i960-*-bout) fmt=bout ;;
i960-*-coff) fmt=coff em=ic960 ;;
i960-*-rtems*) fmt=coff em=ic960 ;;
i960-*-vxworks5.0) fmt=bout ;;
i960-*-vxworks5.*) fmt=coff em=ic960 ;;
i960-*-vxworks*) fmt=bout ;;
+ i960-*-elf*) fmt=elf ;;
+
+ ia64-*-elf*) fmt=elf ;;
+ ia64-*-aix*) fmt=elf em=ia64aix ;;
+ ia64-*-linux-gnu*) fmt=elf em=linux ;;
+ ia64-*-hpux*) fmt=elf em=hpux ;;
m32r-*-*) fmt=elf bfd_gas=yes ;;
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)fmt=elf bfd_gas=yes ;;
+
m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
fmt=aout em=sun3 ;;
m68k-motorola-sysv*) fmt=coff em=delta ;;
mips-*-ultrix*) fmt=ecoff endian=little ;;
mips-*-osf*) fmt=ecoff endian=little ;;
mips-*-ecoff*) fmt=ecoff ;;
- mips-*-ecoff*) fmt=ecoff ;;
+ mips-*-pe*) fmt=coff endian=little em=pe ;;
mips-*-irix6*) fmt=elf ;;
mips-*-irix5*) fmt=elf ;;
mips-*-irix*) fmt=ecoff ;;
mips-*-lnews*) fmt=ecoff em=lnews ;;
mips-*-riscos*) fmt=ecoff ;;
+ mips-*-sysv4*MP* | mips-*-linux-gnu* | mips-*-gnu*)
+ fmt=elf em=tmips ;;
mips-*-sysv*) fmt=ecoff ;;
- mips-*-elf* | mips-*-rtems* | mips-*-linux-gnu* | mips-*-gnu* | mips-*-openbsd*)
+ mips-*-elf* | mips-*-rtems* | mips-*-openbsd*)
fmt=elf ;;
mips-*-vxworks*) fmt=elf
cat >> confdefs.h <<\EOF
;;
mn10200-*-*) fmt=elf bfd_gas=yes ;;
mn10300-*-*) fmt=elf bfd_gas=yes ;;
+ openrisc-*-*) fmt=elf bfd_gas=yes ;;
+ pj*) fmt=elf ;;
ppc-*-pe | ppc-*-cygwin* | ppc-*-winnt*)
fmt=coff em=pe ;;
ppc-*-aix*) fmt=coff ;;
ppc-*-macos* | ppc-*-mpw*)
fmt=coff em=macos ;;
ppc-*-netware*) fmt=elf em=ppcnw ;;
+ ppc-*-vxworks*) fmt=elf ;;
+ s390x-*-linux-gnu*) fmt=elf em=linux ;;
+ s390-*-linux-gnu*) fmt=elf em=linux ;;
+
+ sh-*-linux*) fmt=elf em=linux ;;
sh-*-elf*) fmt=elf ;;
- sh-*-coff*) fmt=coff ;;
- sh-*-rtems*) fmt=coff ;;
+ sh-*-coff*) fmt=coff bfd_gas=yes;;
+ sh-*-pe*) fmt=coff em=pe bfd_gas=yes;;
+ sh-*-rtemself*) fmt=elf ;;
+ sh-*-rtems*) fmt=coff bfd_gas=yes;;
ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
ns32k-pc532-openbsd*) fmt=aout em=nbsd532 ;;
- sparc-*-rtems*) fmt=aout ;;
+ sparc-*-rtemsaout*) fmt=aout ;;
+ sparc-*-rtemself*) fmt=elf ;;
+ sparc-*-rtems*) fmt=elf ;;
sparc-*-sunos4*) fmt=aout em=sun3 ;;
sparc-*-aout | sparc*-*-vxworks*)
fmt=aout em=sparcaout ;;
sparc-fujitsu-none) fmt=aout ;;
sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
fmt=elf ;;
- sparc-*-netbsd*) fmt=aout em=nbsd ;;
+ sparc-*-netbsd*) em=nbsd bfd_gas=yes
+ case ${cpu} in
+ sparc) case ${os} in
+ *elf*) fmt=elf ;;
+ *) fmt=aout ;;
+ esac ;;
+ sparc64) fmt=elf ;;
+ esac
+ ;;
sparc-*-openbsd*) fmt=aout em=nbsd ;;
strongarm-*-coff) fmt=coff ;;
strongarm-*-elf) fmt=elf ;;
+ xscale-*-coff) fmt=coff ;;
+ xscale-*-elf) fmt=elf ;;
tic30-*-*aout*) fmt=aout bfd_gas=yes ;;
tic30-*-*coff*) fmt=coff bfd_gas=yes ;;
+ tic54x-*-* | c54x*-*-*)
+ fmt=coff bfd_gas=yes need_libm=yes;;
tic80-*-*) fmt=coff ;;
v850-*-*) fmt=elf bfd_gas=yes ;;
*-*-aout | *-*-scout)
fmt=aout ;;
+ *-*-freebsd*) fmt=elf em=freebsd bfd_gas=yes ;;
*-*-nindy*)
fmt=bout ;;
*-*-bsd*)
arm-*) bfd_gas=yes ;;
# not yet
# i386-aout) bfd_gas=preferred ;;
+ ia64*-*) bfd_gas=yes ;;
mips-*) bfd_gas=yes ;;
ns32k-*) bfd_gas=yes ;;
+ pdp11-*) bfd_gas=yes ;;
ppc-*) bfd_gas=yes ;;
sparc-*) bfd_gas=yes ;;
strongarm-*) bfd_gas=yes ;;
+ xscale-*) bfd_gas=yes ;;
*-elf) bfd_gas=yes ;;
*-ecoff) bfd_gas=yes ;;
*-som) bfd_gas=yes ;;
+ #enable bfd for coff and aout to allow testing if a bfd target is
+ #the primary target, but not for coff or aout as the primary target
+ i386-coff) if test x${primary_bfd_gas} = xyes; then bfd_gas=yes; fi ;;
+ i386-aout) if test x${primary_bfd_gas} = xyes; then bfd_gas=yes; fi ;;
*) ;;
esac
# Any other special object files needed ?
case ${cpu_type} in
- fr30 | m32r)
+ fr30 | m32r | openrisc)
using_cgen=yes
;;
esac
;;
+ s390)
+ if test $this_target = $target ; then
+ cat >> confdefs.h <<EOF
+#define DEFAULT_ARCH "${arch}"
+EOF
+
+ fi
+ ;;
+
mips)
echo ${extra_objects} | grep -s "itbl-parse.o"
if test $? -ne 0 ; then
fi
;;
+ i386)
+ if test $this_target = $target ; then
+ cat >> confdefs.h <<EOF
+#define DEFAULT_ARCH "${arch}"
+EOF
+
+ fi
+ ;;
sparc)
if test $this_target = $target ; then
cat >> confdefs.h <<EOF
mips-*-*-elf) case "$endian" in
big) emulation="mipsbelf mipslelf mipself" ;;
*) emulation="mipslelf mipsbelf mipself" ;;
- # Uncommenting the next line will turn on support for i386 COFF
- # in any i386 ELF configuration. This probably doesn't work
- # correctly.
- # i386-*-*-elf) emulation="i386coff i386elf" ;;
esac ;;
+ mips-*-sysv4*MP*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
+ # i386-pc-pe-coff != i386-pc-coff.
+ i386-*-pe-coff) ;;
+ # Uncommenting the next line will turn on support for i386 AOUT
+ # for the default linux configuration
+ # i386-*-linux*-elf) emulation="i386elf i386aout" ;;
+ #
+ i386-*-aout) emulation="i386aout" ;;
+ i386-*-coff) emulation="i386coff" ;;
+ i386-*-elf) emulation="i386elf" ;;
+
+ # Always all formats. The first stated emulation becomes the default.
+ cris-*-*aout*) emulation="crisaout criself" ;;
+ cris-*-*) emulation="criself crisaout" ;;
esac
emulations="$emulations $emulation"
done
+# Turn on all targets if possible
+if test ${all_targets} = "yes"; then
+ case ${target_cpu_type} in
+ i386)
+ case ${obj_format} in
+ aout)
+ emulations="$emulations i386coff i386elf"
+ ;;
+ coff)
+ emulations="$emulations i386aout i386elf"
+ ;;
+ elf)
+ emulations="$emulations i386aout i386coff"
+ ;;
+ esac
+ ;;
+ esac
+fi
+
# Assign floating point type. Most processors with FP support
# IEEE FP. On those that don't support FP at all, usually IEEE
# is emulated.
case ${target_cpu} in
vax | tahoe ) atof=${target_cpu} ;;
+ pdp11) atof=vax ;;
*) atof=ieee ;;
esac
for em in . $emulations ; do
case $em in
.) continue ;;
- mipsbelf | mipslelf)
+ mipsbelf | mipslelf | mipself)
fmt=elf file=mipself ;;
- mipsbecoff | mipslecoff)
+ mipsbecoff | mipslecoff | mipsecoff)
fmt=ecoff file=mipsecoff ;;
- i386coff)
- fmt=coff file=i386coff ;;
- i386elf)
- fmt=elf file=i386elf ;;
+ *coff)
+ fmt=coff file=$em ;;
+ *aout)
+ fmt=aout file=$em ;;
+ *elf)
+ fmt=elf file=$em ;;
esac
formats="$formats $fmt"
emfiles="$emfiles e-$file.o"
obj_format=multi
fi
if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
- te_file=multi
- extra_objects="$extra_objects $emfiles"
DEFAULT_EMULATION=`set . $emulations ; echo $2`
- cat >> confdefs.h <<\EOF
+ # e-mips* has more than one emulation per file, e-i386* has just one at the
+ # moment. If only one emulation is specified, then don't define
+ # USE_EMULATIONS or include any of the e-files as they will only be bloat.
+ case "${obj_format}${emfiles}" in
+ multi* | *mips*)
+ extra_objects="$extra_objects $emfiles"
+ cat >> confdefs.h <<\EOF
#define USE_EMULATIONS 1
EOF
-
+ ;;
+ esac
fi
cat >> confdefs.h <<EOF
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2323: checking for $ac_word" >&5
+echo "configure:3105: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2353: checking for $ac_word" >&5
+echo "configure:3135: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2404: checking for $ac_word" >&5
+echo "configure:3186: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2436: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:3218: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2447 "configure"
+#line 3229 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2452: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2478: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:3260: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2483: checking whether we are using GNU C" >&5
+echo "configure:3265: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2492: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:3274: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2511: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:3293: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2548: checking for $ac_word" >&5
+echo "configure:3330: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$YACC" || YACC="yacc"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2579: checking how to run the C preprocessor" >&5
+echo "configure:3361: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2594 "configure"
+#line 3376 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2600: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3382: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2611 "configure"
+#line 3393 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2617: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3399: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2628 "configure"
+#line 3410 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2634: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3416: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2664: checking for $ac_word" >&5
+echo "configure:3446: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2697: checking for $ac_word" >&5
+echo "configure:3479: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:2731: checking for yywrap in -l$ac_lib" >&5
+echo "configure:3513: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2739 "configure"
+#line 3521 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:2750: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:2773: checking lex output file root" >&5
+echo "configure:3555: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2794: checking whether yytext is a pointer" >&5
+echo "configure:3576: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 2806 "configure"
+#line 3588 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:2813: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3595: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
ALL_LINGUAS=
-echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:2837: checking for POSIXized ISC" >&5
-if test -d /etc/conf/kconfig.d &&
- grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
-then
- echo "$ac_t""yes" 1>&6
- ISC=yes # If later tests want to check for ISC.
- cat >> confdefs.h <<\EOF
-#define _POSIX_SOURCE 1
-EOF
-
- if test "$GCC" = yes; then
- CC="$CC -posix"
- else
- CC="$CC -Xp"
- fi
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3621: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
- ISC=
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2858: checking for ANSI C header files" >&5
+echo "configure:3649: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2863 "configure"
+#line 3654 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2871: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3662: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2888 "configure"
+#line 3679 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2906 "configure"
+#line 3697 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2927 "configure"
+#line 3718 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2938: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3729: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2962: checking for working const" >&5
+echo "configure:3753: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2967 "configure"
+#line 3758 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:3016: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3807: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:3037: checking for inline" >&5
+echo "configure:3828: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 3044 "configure"
+#line 3835 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:3051: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3842: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:3077: checking for off_t" >&5
+echo "configure:3868: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3082 "configure"
+#line 3873 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:3110: checking for size_t" >&5
+echo "configure:3901: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3115 "configure"
+#line 3906 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:3145: checking for working alloca.h" >&5
+echo "configure:3936: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3150 "configure"
+#line 3941 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:3157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:3178: checking for alloca" >&5
+echo "configure:3969: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3183 "configure"
+#line 3974 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:3211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4002: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:3243: checking whether alloca needs Cray hooks" >&5
+echo "configure:4034: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3248 "configure"
+#line 4039 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3273: checking for $ac_func" >&5
+echo "configure:4064: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3278 "configure"
+#line 4069 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3301: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3328: checking stack direction for C alloca" >&5
+echo "configure:4119: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 3336 "configure"
+#line 4127 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:3355: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3380: checking for $ac_hdr" >&5
+echo "configure:4171: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3385 "configure"
+#line 4176 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3390: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4181: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3419: checking for $ac_func" >&5
+echo "configure:4210: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3424 "configure"
+#line 4215 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3447: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4238: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3472: checking for working mmap" >&5
+echo "configure:4263: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 3480 "configure"
+#line 4271 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3648: checking for $ac_hdr" >&5
+echo "configure:4439: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3653 "configure"
+#line 4444 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3658: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4449: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3688: checking for $ac_func" >&5
+echo "configure:4479: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3693 "configure"
+#line 4484 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3716: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4507: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3745: checking for $ac_func" >&5
+echo "configure:4536: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3750 "configure"
+#line 4541 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3807: checking for LC_MESSAGES" >&5
+echo "configure:4598: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3812 "configure"
+#line 4603 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3840: checking whether NLS is requested" >&5
+echo "configure:4631: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3860: checking whether included gettext is requested" >&5
+echo "configure:4651: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3879: checking for libintl.h" >&5
+echo "configure:4670: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3884 "configure"
+#line 4675 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3889: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4680: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3906: checking for gettext in libc" >&5
+echo "configure:4697: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3911 "configure"
+#line 4702 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3934: checking for bindtextdomain in -lintl" >&5
+echo "configure:4725: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3942 "configure"
+#line 4733 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:3953: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3969: checking for gettext in libintl" >&5
+echo "configure:4760: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3974 "configure"
+#line 4765 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4772: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4009: checking for $ac_word" >&5
+echo "configure:4800: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4043: checking for $ac_func" >&5
+echo "configure:4834: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4048 "configure"
+#line 4839 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4862: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4098: checking for $ac_word" >&5
+echo "configure:4889: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4134: checking for $ac_word" >&5
+echo "configure:4925: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 4166 "configure"
+#line 4957 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:4174: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4206: checking for $ac_word" >&5
+echo "configure:4997: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4240: checking for $ac_word" >&5
+echo "configure:5031: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4276: checking for $ac_word" >&5
+echo "configure:5067: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4366: checking for catalogs to be installed" >&5
+echo "configure:5157: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4394: checking for linux/version.h" >&5
+echo "configure:5185: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4399 "configure"
+#line 5190 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4404: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5195: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4467: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:5258: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
MAINT=$MAINTAINER_MODE_TRUE
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:4490: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4495 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:4506: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_cygwin=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:4523: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4528 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:4535: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_mingw32=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:4554: checking for executable suffix" >&5
+echo "configure:5283: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:4564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:5293: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj | *.ilk | *.pdb) ;;
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4589: checking for $ac_hdr" >&5
+echo "configure:5318: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4594 "configure"
+#line 5323 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4599: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5328: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
-echo "configure:4629: checking whether compiling a cross-assembler" >&5
+echo "configure:5358: checking whether compiling a cross-assembler" >&5
if test "${host}" = "${target}"; then
cross_gas=no
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:4644: checking for working alloca.h" >&5
+echo "configure:5373: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4649 "configure"
+#line 5378 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:4656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5385: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:4677: checking for alloca" >&5
+echo "configure:5406: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4682 "configure"
+#line 5411 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:4710: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:4742: checking whether alloca needs Cray hooks" >&5
+echo "configure:5471: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4747 "configure"
+#line 5476 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4772: checking for $ac_func" >&5
+echo "configure:5501: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4777 "configure"
+#line 5506 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4800: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5529: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:4827: checking stack direction for C alloca" >&5
+echo "configure:5556: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 4835 "configure"
+#line 5564 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:4854: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5583: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:4876: checking for inline" >&5
+echo "configure:5605: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 4883 "configure"
+#line 5612 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:4890: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5619: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
for ac_func in unlink remove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4920: checking for $ac_func" >&5
+echo "configure:5649: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4925 "configure"
+#line 5654 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5677: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4977: checking for $ac_func" >&5
+echo "configure:5706: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4982 "configure"
+#line 5711 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5005: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5734: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
+# do we need the math library?
+case "${need_libm}" in
+yes)
+ LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ echo $ac_n "checking for _mwvalidcheckl in -lmw""... $ac_c" 1>&6
+echo "configure:5769: checking for _mwvalidcheckl in -lmw" >&5
+ac_lib_var=`echo mw'_'_mwvalidcheckl | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lmw $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5777 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char _mwvalidcheckl();
+
+int main() {
+_mwvalidcheckl()
+; return 0; }
+EOF
+if { (eval echo configure:5788: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBM="-lmw"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
+echo "configure:5809: checking for main in -lm" >&5
+ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lm $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5817 "configure"
+#include "confdefs.h"
+
+int main() {
+main()
+; return 0; }
+EOF
+if { (eval echo configure:5824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBM="$LIBM -lm"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ ;;
+*)
+ echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
+echo "configure:5847: checking for main in -lm" >&5
+ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lm $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5855 "configure"
+#include "confdefs.h"
+
+int main() {
+main()
+; return 0; }
+EOF
+if { (eval echo configure:5862: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBM="-lm"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ ;;
+esac
+
+
+ ;;
+esac
+
# Some non-ANSI preprocessors botch requoting inside strings. That's bad
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
-echo "configure:5034: checking for working assert macro" >&5
+echo "configure:5893: checking for working assert macro" >&5
if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5039 "configure"
+#line 5898 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
; return 0; }
EOF
-if { (eval echo configure:5055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5914: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_assert_ok=yes
else
"
echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
-echo "configure:5096: checking whether declaration is required for strstr" >&5
+echo "configure:5955: checking whether declaration is required for strstr" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5101 "configure"
+#line 5960 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5971: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_strstr=no
else
echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
-echo "configure:5133: checking whether declaration is required for malloc" >&5
+echo "configure:5992: checking whether declaration is required for malloc" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5138 "configure"
+#line 5997 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6008: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_malloc=no
else
echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
-echo "configure:5170: checking whether declaration is required for free" >&5
+echo "configure:6029: checking whether declaration is required for free" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5175 "configure"
+#line 6034 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6045: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_free=no
else
echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
-echo "configure:5207: checking whether declaration is required for sbrk" >&5
+echo "configure:6066: checking whether declaration is required for sbrk" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5212 "configure"
+#line 6071 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6082: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_sbrk=no
else
echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6
-echo "configure:5244: checking whether declaration is required for environ" >&5
+echo "configure:6103: checking whether declaration is required for environ" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5249 "configure"
+#line 6108 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_environ=no
else
# for it?
echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
-echo "configure:5284: checking whether declaration is required for errno" >&5
+echo "configure:6143: checking whether declaration is required for errno" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5289 "configure"
+#line 6148 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
; return 0; }
EOF
-if { (eval echo configure:5304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_errno=no
else
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile doc/Makefile .gdbinit:gdbinit.in po/Makefile.in:po/Make-in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile doc/Makefile ${GDBINIT}:gdbinit.in po/Makefile.in:po/Make-in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
+s%@CC@%$CC%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
-s%@RANLIB@%$RANLIB%g
-s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
s%@LN_S@%$LN_S%g
+s%@OBJEXT@%$OBJEXT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
+s%@WARN_CFLAGS@%$WARN_CFLAGS%g
+s%@GDBINIT@%$GDBINIT%g
s%@cgen_cpu_prefix@%$cgen_cpu_prefix%g
s%@extra_objects@%$extra_objects%g
s%@target_cpu_type@%$target_cpu_type%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
+s%@LIBM@%$LIBM%g
CEOF
EOF
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile .gdbinit:gdbinit.in po/Makefile.in:po/Make-in"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile ${GDBINIT}:gdbinit.in po/Makefile.in:po/Make-in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then