dnl And be careful when changing it! If you must add tests with square
dnl brackets, be sure changequote invocations surround it.
dnl
+dnl Copyright (C) 2012-2014 Free Software Foundation, Inc.
+dnl
+dnl This file is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; see the file COPYING3. If not see
+dnl <http://www.gnu.org/licenses/>.
dnl
dnl v2.5 needed for --bindir et al
-AC_PREREQ(2.57)
-AC_INIT(as.h)
+AC_PREREQ(2.59)
+AC_INIT
+AC_CONFIG_SRCDIR(as.h)
dnl Autoconf 2.57 will find the aux dir without this. However, unless
dnl we specify this explicitly, automake-1.7 will assume that ylwrap is in
dnl gas/ instead of gas/../.
AC_CONFIG_AUX_DIR(..)
-AC_CANONICAL_SYSTEM
+AC_CANONICAL_TARGET
AC_ISC_POSIX
changequote(,)dnl
-BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
+BFD_VERSION=`${srcdir}/../bfd/configure --version | sed -n -e '1s,.* ,,p'`
changequote([,])dnl
AM_INIT_AUTOMAKE(gas, ${BFD_VERSION})
-AM_PROG_LIBTOOL
+AC_PROG_CC
+AC_GNU_SOURCE
+AC_USE_SYSTEM_EXTENSIONS
+ACX_LARGEFILE
+
+LT_INIT
-user_bfd_gas=
-AC_ARG_ENABLE(bfd-assembler,
-[ --enable-bfd-assembler use BFD back end for writing object files],
-[case "${enableval}" in
- yes) need_bfd=yes user_bfd_gas=yes ;;
- no) user_bfd_gas=no ;;
- *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
-esac])dnl
AC_ARG_ENABLE(targets,
-[ targets alternative target configurations besides the primary],
+[ --enable-targets alternative target configurations besides the primary],
[case "${enableval}" in
- yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
+ yes | "") AC_MSG_ERROR(enable-targets option must specify target names or 'all')
;;
no) enable_targets= ;;
*) enable_targets=$enableval ;;
esac])dnl
-AC_ARG_ENABLE(commonbfdlib,
-[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library],
+
+ac_checking=yes
+if grep '^RELEASE=y' ${srcdir}/../bfd/Makefile.am >/dev/null 2>/dev/null ; then
+ ac_checking=
+fi
+AC_ARG_ENABLE(checking,
+[ --enable-checking enable run-time checks],
[case "${enableval}" in
- yes) commonbfdlib=true ;;
- no) commonbfdlib=false ;;
- *) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
+ no|none) ac_checking= ;;
+ *) ac_checking=yes ;;
esac])dnl
+if test x$ac_checking != x ; then
+ AC_DEFINE(ENABLE_CHECKING, 1, [Define if you want run-time sanity checks.])
+fi
using_cgen=no
-build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
-AC_ARG_ENABLE(build-warnings,
-[ --enable-build-warnings Enable build-time compiler warnings if gcc is used],
-[case "${enableval}" in
- yes) ;;
- no) build_warnings="-w";;
- ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${build_warnings} ${t}";;
- *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${t} ${build_warnings}";;
- *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
- echo "Setting warning flags = $build_warnings" 6>&1
-fi])dnl
-WARN_CFLAGS=""
-if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
- WARN_CFLAGS="${build_warnings}"
-fi
-AC_SUBST(WARN_CFLAGS)
+AM_BINUTILS_WARNINGS
# Generate a header file
-AM_CONFIG_HEADER(config.h:config.in)
+AC_CONFIG_HEADERS(config.h:config.in)
+
+# PR 14072
+AH_VERBATIM([00_CONFIG_H_CHECK],
+[/* Check that config.h is #included before system headers
+ (this works only for glibc, but that should be enough). */
+#if defined(__GLIBC__) && !defined(__FreeBSD_kernel__) && !defined(__CONFIG_H__)
+# error config.h must be #included before system headers
+#endif
+#define __CONFIG_H__ 1])
# If we are on a DOS filesystem, we must use gdb.ini rather than
# .gdbinit.
esac
AC_SUBST(GDBINIT)
+#We need this for the host. BOUT header is in host order.
+AC_C_BIGENDIAN
+
te_file=generic
# Makefile target for installing gas in $(tooldir)/bin.
for this_target in $target $canon_targets ; do
-changequote(,)dnl
- eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
-changequote([,])dnl
+ targ=${this_target}
+ . ${srcdir}/configure.tgt
- # Check for architecture variants.
- # Note: This table is alpha-sorted, please try to keep it that way.
- arch=
- endian=
- case ${cpu} in
- am33_2.0) cpu_type=mn10300 endian=little ;;
- alpha*) cpu_type=alpha ;;
- arm*be|xscale*be|strongarm*be | \
- arm*b|xscale*b|strongarm*b) cpu_type=arm endian=big ;;
- arm*|xscale*|strongarm*) cpu_type=arm endian=little ;;
- c4x*) cpu_type=tic4x ;;
- crx*) cpu_type=crx endian=little ;;
- hppa*) cpu_type=hppa ;;
-changequote(,)dnl
- i[3-7]86) cpu_type=i386 arch=i386;;
- ia64) cpu_type=ia64 ;;
- ip2k) cpu_type=ip2k endian=big ;;
- iq2000) cpu_type=iq2000 endian=big ;;
- m32r) cpu_type=m32r target_cpu=m32r endian=big ;;
- m32rle) cpu_type=m32r target_cpu=m32r endian=little ;;
- m6811|m6812|m68hc12) cpu_type=m68hc11 ;;
- m680[012346]0) cpu_type=m68k ;;
-changequote([,])dnl
- m68008) cpu_type=m68k ;;
- m683??) cpu_type=m68k ;;
- m5200) cpu_type=m68k ;;
- m8*) cpu_type=m88k ;;
- mips*el) cpu_type=mips endian=little ;;
- mips*) cpu_type=mips endian=big ;;
- or32*) cpu_type=or32 endian=big ;;
- pjl*) cpu_type=pj endian=little ;;
- pj*) cpu_type=pj endian=big ;;
- powerpc*le*) cpu_type=ppc endian=little ;;
- powerpc*) cpu_type=ppc endian=big ;;
- rs6000*) cpu_type=ppc ;;
- s390x*) cpu_type=s390 arch=s390x ;;
- s390*) cpu_type=s390 arch=s390 ;;
- sh5*) cpu_type=sh64 endian=big ;;
- sh5le*) cpu_type=sh64 endian=little ;;
- sh64*) cpu_type=sh64 endian=big ;;
- sh64le*) cpu_type=sh64 endian=little ;;
- sh*le) cpu_type=sh endian=little ;;
- sh*) cpu_type=sh endian=big ;;
- sparclite*) cpu_type=sparc arch=sparclite ;;
- sparclet*) cpu_type=sparc arch=sparclet ;;
- sparc64*) cpu_type=sparc arch=v9-64 ;;
- sparc86x*) cpu_type=sparc arch=sparc86x ;;
- sparc*) cpu_type=sparc arch=sparclite ;; # ??? See tc-sparc.c.
- v850*) cpu_type=v850 ;;
- x86_64) cpu_type=i386 arch=x86_64;;
- xtensa*) cpu_type=xtensa arch=xtensa ;;
- *) cpu_type=${cpu} ;;
+ case ${target_cpu} in
+ crisv32)
+ AC_DEFINE_UNQUOTED(DEFAULT_CRIS_ARCH, $arch,
+ [Default CRIS architecture.])
+ ;;
esac
if test ${this_target} = $target ; then
continue
fi
- generic_target=${cpu_type}-$vendor-$os
- dev=no
- bfd_gas=no
- em=generic
-
- # Assign object format.
- # Note: This table is alpha-sorted, please try to keep it that way.
+ generic_target=${cpu_type}-${target_vendor}-${target_os}
case ${generic_target} in
- a29k-*-coff) fmt=coff ;;
- a29k-amd-udi) fmt=coff ;;
- a29k-amd-ebmon) fmt=coff ;;
- a29k-nyu-sym1) fmt=coff ;;
- a29k-*-rtems*) fmt=coff ;;
- a29k-*-vxworks*) fmt=coff ;;
-
- alpha*-*-*vms*) fmt=evax ;;
- alpha*-*-osf*) fmt=ecoff ;;
- alpha*-*-linuxecoff*) fmt=ecoff ;;
- alpha*-*-linux-gnu*) fmt=elf em=linux ;;
- alpha*-*-netbsd*) fmt=elf em=nbsd ;;
- alpha*-*-openbsd*) fmt=elf em=obsd ;;
-
- arc-*-elf*) fmt=elf ;;
-
- arm-*-aout) fmt=aout ;;
- arm-*-coff | thumb-*-coff) fmt=coff ;;
- arm-*-rtems* | thumb-*-rtems*) fmt=elf ;;
- arm-*-elf | thumb-*-elf) fmt=elf ;;
- arm*-*-eabi*) fmt=elf ;;
- arm*-*-symbianelf*) fmt=elf em=symbian ;;
- arm-*-kaos*) fmt=elf ;;
- arm*-*-conix*) fmt=elf ;;
- arm-*-linux*aout*) fmt=aout em=linux ;;
- arm*-*-linux-gnu*) fmt=elf em=linux ;;
- arm*-*-uclinux*) fmt=elf em=linux ;;
- arm-*-netbsdelf*) fmt=elf em=nbsd ;;
- arm-*-*n*bsd*) fmt=aout em=nbsd ;;
- arm-**-nto*) fmt=elf ;;
- arm-*-oabi | thumb-*-oabi) fmt=elf ;;
- arm-epoc-pe | thumb-epoc-pe) fmt=coff em=epoc-pe ;;
- arm-wince-pe | arm-*-wince) fmt=coff em=wince-pe ;;
- arm-*-pe | thumb-*-pe) fmt=coff em=pe ;;
- arm-*-riscix*) fmt=aout em=riscix ;;
-
- avr-*-*) fmt=elf ;;
-
- cris-*-linux-gnu*) fmt=multi bfd_gas=yes em=linux ;;
- cris-*-*) fmt=multi bfd_gas=yes ;;
-
- crx-*-elf*) fmt=elf ;;
-
- d10v-*-*) fmt=elf ;;
- d30v-*-*) fmt=elf ;;
- dlx-*-*) fmt=elf ;;
-
- fr30-*-*) fmt=elf ;;
- frv-*-*linux*) fmt=elf em=linux;;
- frv-*-*) fmt=elf ;;
-
- hppa-*-linux*) case ${cpu} in
- hppa*64*) fmt=elf em=hppalinux64;;
- hppa*) fmt=elf em=linux;;
- esac ;;
- hppa-*-*elf*) fmt=elf em=hppa ;;
- hppa-*-lites*) fmt=elf em=hppa ;;
- hppa-*-netbsd*) fmt=elf em=nbsd ;;
- hppa-*-openbsd*) fmt=elf em=hppa ;;
- hppa-*-osf*) fmt=som em=hppa ;;
- hppa-*-rtems*) fmt=elf em=hppa ;;
- hppa-*-hpux11*) case ${cpu} in
- hppa*64*) fmt=elf em=hppa64 ;;
- hppa*) fmt=som em=hppa ;;
- esac ;;
- hppa-*-hpux*) fmt=som em=hppa ;;
- hppa-*-mpeix*) fmt=som em=hppa ;;
- hppa-*-bsd*) fmt=som em=hppa ;;
- hppa-*-hiux*) fmt=som em=hppa ;;
-
- h8300-*-rtems*) fmt=coff ;;
- h8300-*-coff) fmt=coff ;;
- h8300-*-elf) fmt=elf ;;
- h8500-*-rtems*) fmt=coff ;;
- h8500-*-coff) fmt=coff ;;
-
- i370-*-elf* | i370-*-linux*) fmt=elf ;;
- i386-ibm-aix*) fmt=coff em=i386aix ;;
- i386-sequent-bsd*) fmt=aout em=dynix ;;
- i386-*-beospe*) fmt=coff em=pe ;;
- i386-*-beos*) fmt=elf ;;
- i386-*-coff) fmt=coff ;;
- i386-*-elf) fmt=elf ;;
- i386-*-kaos*) fmt=elf ;;
- i386-*-bsd*) fmt=aout em=386bsd ;;
- i386-*-netbsd0.8) fmt=aout em=386bsd ;;
- i386-*-netbsdpe*) fmt=coff em=pe ;;
- i386-*-netbsd*-gnu* | \
- i386-*-knetbsd*-gnu | \
- i386-*-netbsdelf*) fmt=elf em=nbsd ;;
- i386-*-*n*bsd*) case ${cpu} in
- x86_64) fmt=elf em=nbsd ;;
- *) fmt=aout em=nbsd ;;
- esac ;;
- i386-*-linux*aout*) fmt=aout em=linux ;;
- i386-*-linux*oldld) fmt=aout em=linux ;;
- i386-*-linux*coff*) fmt=coff em=linux ;;
- i386-*-linux-gnu*) fmt=elf em=linux ;;
- x86_64-*-linux-gnu*) fmt=elf em=linux ;;
- i386-*-lynxos*) fmt=elf em=lynx bfd_gas=yes ;;
-changequote(,)dnl
- i386-*-sysv[45]*) fmt=elf ;;
- i386-*-solaris*) fmt=elf ;;
- i386-*-freebsdaout*) fmt=aout em=386bsd ;;
- i386-*-freebsd[12].*) fmt=aout em=386bsd ;;
- i386-*-freebsd[12]) fmt=aout em=386bsd ;;
-changequote([,])dnl
- i386-*-freebsd* | i386-*-kfreebsd*-gnu)
- fmt=elf em=freebsd ;;
- i386-*-sysv*) fmt=coff ;;
- i386-*-sco3.2v5*coff) fmt=coff ;;
- i386-*-isc*) fmt=coff ;;
- i386-*-sco3.2v5*) fmt=elf
- if test ${this_target} = $target; then
- AC_DEFINE(SCO_ELF, 1, [Define if defaulting to ELF on SCO 5.])
- fi ;;
- i386-*-sco3.2*) fmt=coff ;;
- i386-*-vsta) fmt=aout ;;
+ i386-*-sco3.2v5*)
+ if test ${this_target} = $target; then
+ AC_DEFINE(SCO_ELF, 1, [Define if defaulting to ELF on SCO 5.])
+ fi
+ ;;
+
i386-*-msdosdjgpp* \
| i386-*-go32* \
- | i386-go32-rtems*) fmt=coff em=go32
- AC_DEFINE(STRICTCOFF, 1, [Using strict COFF?]) ;;
- i386-*-rtemself*) fmt=elf ;;
- i386-*-rtemscoff*) fmt=coff ;;
- i386-*-rtems*) fmt=elf ;;
- i386-*-gnu*) fmt=elf ;;
- i386-*-mach*) fmt=aout em=mach ;;
- i386-*-msdos*) fmt=aout ;;
- i386-*-moss*) fmt=elf ;;
- i386-*-pe) fmt=coff em=pe ;;
- i386-*-cygwin*) fmt=coff em=pe ;;
- i386-*-interix*) fmt=coff em=interix ;;
- i386-*-mingw32*) fmt=coff em=pe ;;
- i386-*-nto-qnx*) fmt=elf ;;
- i386-*-*nt*) fmt=coff em=pe ;;
- i386-*-chaos) fmt=elf ;;
-
- i860-*-*) fmt=elf endian=little
- AC_MSG_WARN(GAS support for ${generic_target} is preliminary and a work in progress) ;;
- i960-*-bout) fmt=bout ;;
- i960-*-coff) fmt=coff em=ic960 ;;
- i960-*-rtems*) fmt=coff em=ic960 ;;
- i960-*-nindy*) fmt=bout ;;
- i960-*-vxworks5.0) fmt=bout ;;
- i960-*-vxworks5.*) fmt=coff em=ic960 ;;
- i960-*-vxworks*) fmt=bout ;;
- i960-*-elf*) fmt=elf ;;
-
- ia64-*-elf*) fmt=elf ;;
- ia64-*-aix*) fmt=elf em=ia64aix ;;
- ia64-*-linux-gnu*) fmt=elf em=linux ;;
- ia64-*-hpux*) fmt=elf em=hpux ;;
- ia64-*-netbsd*) fmt=elf em=nbsd ;;
-
- ip2k-*-*) fmt=elf ;;
-
- iq2000-*-elf) fmt=elf bfd_gas=yes ;;
-
- m32r-*-elf*) fmt=elf ;;
- m32r-*-linux*) fmt=elf em=linux;;
-
- m68hc11-*-* | m6811-*-*) fmt=elf ;;
- m68hc12-*-* | m6812-*-*) fmt=elf ;;
-
- m68k-*-vxworks*) fmt=aout em=sun3 ;;
- m68k-ericsson-ose) fmt=aout em=sun3 ;;
- m68k-*-sunos*) fmt=aout em=sun3 ;;
- m68k-motorola-sysv*) fmt=coff em=delta ;;
- m68k-bull-sysv3*) fmt=coff em=dpx2 ;;
- m68k-apollo-*) fmt=coff em=apollo ;;
- m68k-*-elf*) fmt=elf ;;
- m68k-*-sysv4*) fmt=elf em=svr4 ;;
- m68k-*-sysv*) fmt=coff ;;
- m68k-*-coff | m68k-*-rtemscoff*) fmt=coff ;;
- m68k-*-rtems*) fmt=elf ;;
- m68k-*-hpux*) fmt=hp300 em=hp300 ;;
- m68k-*-linux*aout*) fmt=aout em=linux ;;
- m68k-*-linux-gnu*) fmt=elf em=linux ;;
- m68k-*-uclinux*) fmt=elf ;;
- m68k-*-gnu*) fmt=elf ;;
- m68k-*-lynxos*) fmt=coff em=lynx ;;
- m68k-*-netbsdelf*) fmt=elf em=nbsd ;;
- m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
- m68k-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
- m68k-apple-aux*) fmt=coff em=aux ;;
- m68k-*-psos*) fmt=elf em=psos;;
-
- m88k-motorola-sysv3*) fmt=coff em=delt88 ;;
- m88k-*-coff*) fmt=coff ;;
-
- mcore-*-elf) fmt=elf ;;
- mcore-*-pe) fmt=coff em=pe bfd_gas=yes ;;
-
- # don't change em like *-*-bsd does
- mips-dec-openbsd*) fmt=elf endian=little ;;
- mips-sony-bsd*) fmt=ecoff ;;
- mips-*-bsd*)
- AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
- mips-*-ultrix*) fmt=ecoff endian=little ;;
- mips-*-osf*) fmt=ecoff endian=little ;;
- mips-*-ecoff*) fmt=ecoff ;;
- mips-*-pe*) fmt=coff endian=little em=pe ;;
- mips-*-irix6*) fmt=elf em=irix ;;
- mips-*-irix5*) fmt=elf em=irix ;;
- mips-*-irix*) fmt=ecoff em=irix ;;
- mips-*-lnews*) fmt=ecoff em=lnews ;;
- mips-*-riscos*) fmt=ecoff ;;
- mips*-*-linux*) fmt=elf em=tmips ;;
- mips-*-sysv4*MP* | mips-*-gnu*) fmt=elf em=tmips ;;
- mips-*-sysv*) fmt=ecoff ;;
- mips-*-elf* | mips-*-rtems*) fmt=elf ;;
- mips-*-netbsd*) fmt=elf ;;
- mips-*-openbsd*) fmt=elf ;;
-
- mmix-*-*) fmt=elf ;;
- mn10200-*-*) fmt=elf ;;
- # cpu_type for am33_2.0 is set to mn10300
- mn10300-*-linux*) fmt=elf bfd_gas=yes em=linux ;;
- mn10300-*-*) fmt=elf ;;
-
- msp430-*-*) fmt=elf ;;
-
- ns32k-pc532-mach*) fmt=aout em=pc532mach ;;
- ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
- ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
- ns32k-*-*n*bsd*) fmt=aout em=nbsd532 ;;
-
- openrisc-*-*) fmt=elf ;;
- or32-*-rtems*) fmt=elf ;;
- or32-*-coff) fmt=coff ;;
- or32-*-elf) fmt=elf ;;
-
- pj*) fmt=elf ;;
-
- ppc-*-pe | ppc-*-cygwin*) fmt=coff em=pe ;;
- ppc-*-winnt*) fmt=coff em=pe ;;
+ | i386-go32-rtems*)
+ AC_DEFINE(STRICTCOFF, 1, [Using strict COFF?])
+ ;;
+
+ i860-*-*)
+ AC_MSG_WARN(GAS support for ${generic_target} is preliminary and a work in progress)
+ ;;
+
+ microblaze*)
+ ;;
+
changequote(,)dnl
- ppc-*-aix5.[01]) fmt=coff em=aix5 ;;
+ ppc-*-aix[5-9].*)
changequote([,])dnl
- ppc-*-aix5.*) fmt=coff em=aix5
- AC_DEFINE(AIX_WEAK_SUPPORT, 1,
+ AC_DEFINE(AIX_WEAK_SUPPORT, 1,
[Define if using AIX 5.2 value for C_WEAKEXT.])
- ;;
- ppc-*-aix*) fmt=coff ;;
- ppc-*-beos*) fmt=coff ;;
- ppc-*-*n*bsd* | ppc-*-elf*) fmt=elf ;;
- ppc-*-eabi* | ppc-*-sysv4*) fmt=elf ;;
- ppc-*-linux-gnu*) fmt=elf em=linux
- case "$endian" in
- big) ;;
- *) AC_MSG_ERROR(GNU/Linux must be configured big endian) ;;
- esac ;;
- ppc-*-solaris*) fmt=elf
- if test ${this_target} = $target; then
- AC_DEFINE(TARGET_SOLARIS_COMMENT, 1,
- [Define if default target is PowerPC Solaris.])
- fi
- if test x${endian} = xbig; then
- AC_MSG_ERROR(Solaris must be configured little endian)
- fi ;;
- ppc-*-rtems*) fmt=elf ;;
- ppc-*-macos*) fmt=coff em=macos ;;
- ppc-*-nto*) fmt=elf ;;
- ppc-*-kaos*) fmt=elf ;;
- ppc-*-lynxos*) fmt=elf em=lynx bfd_gas=yes ;;
-
- s390x-*-linux-gnu*) fmt=elf em=linux ;;
- s390-*-linux-gnu*) fmt=elf em=linux ;;
-
- sh*-*-linux*) fmt=elf em=linux
- case ${cpu} in
- sh*eb) endian=big ;;
- *) endian=little ;;
- esac ;;
- sh5*-*-netbsd*) fmt=elf em=nbsd ;;
- sh64*-*-netbsd*) fmt=elf em=nbsd ;;
- sh*-*-netbsdelf*) fmt=elf em=nbsd ;;
- sh*-*-symbianelf*) fmt=elf endian=little
- AC_DEFINE(TARGET_SYMBIAN, 1, [Define if target is Symbian OS.])
- ;;
- sh-*-elf*) fmt=elf ;;
- sh-*-coff*) fmt=coff ;;
- sh-*-nto*) fmt=elf ;;
- sh-*-pe*) fmt=coff em=pe bfd_gas=yes endian=little ;;
- sh-*-rtemscoff*) fmt=coff ;;
- sh-*-rtems*) fmt=elf ;;
- sh-*-kaos*) fmt=elf ;;
- shle*-*-kaos*) fmt=elf ;;
- sh64-*-elf*) fmt=elf ;;
-
- sparc-*-rtemsaout*) fmt=aout ;;
- sparc-*-rtemself*) fmt=elf ;;
- sparc-*-rtems*) fmt=elf ;;
- sparc-*-sunos4*) fmt=aout em=sun3 ;;
- sparc-*-aout | sparc*-*-vxworks*) fmt=aout em=sparcaout ;;
- sparc-*-coff) fmt=coff ;;
- sparc-*-linux*aout*) fmt=aout em=linux ;;
- sparc-*-linux-gnu*) fmt=elf em=linux ;;
- sparc-*-lynxos*) fmt=coff em=lynx ;;
- sparc-fujitsu-none) fmt=aout ;;
- sparc-*-elf) fmt=elf ;;
- sparc-*-sysv4*) fmt=elf ;;
- sparc-*-solaris*) fmt=elf ;;
- sparc-*-netbsdelf*) fmt=elf em=nbsd ;;
- sparc-*-*n*bsd*) case ${cpu} in
- sparc64) fmt=elf em=nbsd ;;
- *) fmt=aout em=nbsd ;;
- esac ;;
- strongarm-*-coff) fmt=coff ;;
- strongarm-*-elf) fmt=elf ;;
- strongarm-*-kaos*) fmt=elf ;;
-
- tic30-*-*aout*) fmt=aout bfd_gas=yes ;;
- tic30-*-*coff*) fmt=coff bfd_gas=yes ;;
- tic4x-*-* | c4x-*-*) fmt=coff bfd_gas=yes ;;
- tic54x-*-* | c54x*-*-*) fmt=coff bfd_gas=yes need_libm=yes;;
- tic80-*-*) fmt=coff ;;
-
- v850-*-*) fmt=elf ;;
- v850e-*-*) fmt=elf ;;
- v850ea-*-*) fmt=elf ;;
-
- vax-*-netbsdelf*) fmt=elf em=nbsd ;;
- vax-*-netbsd*) fmt=aout em=nbsd ;;
- vax-*-bsd* | vax-*-ultrix*) fmt=aout ;;
- vax-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;;
- vax-*-vms) fmt=vms ;;
-
- w65-*-*) fmt=coff ;;
-
- xscale-*-coff) fmt=coff ;;
- xscale-*-elf) fmt=elf ;;
-
- xstormy16-*-*) fmt=elf ;;
-
- xtensa-*-*) fmt=elf ;;
-
- z8k-*-coff | z8k-*-sim) fmt=coff ;;
-
- *-*-aout | *-*-scout) fmt=aout ;;
- *-*-freebsd* | *-*-kfreebsd*-gnu) fmt=elf em=freebsd ;;
- *-*-nindy*) fmt=bout ;;
- *-*-bsd*) fmt=aout em=sun3 ;;
- *-*-generic) fmt=generic ;;
- *-*-xray | *-*-hms) fmt=coff ;;
- *-*-sim) fmt=coff ;;
- *-*-elf | *-*-sysv4* | *-*-solaris*) fmt=elf dev=yes ;;
- *-*-aros*) fmt=elf em=linux bfd_gas=yes ;;
- *-*-vxworks | *-*-windiss) fmt=elf ;;
- *-*-netware) fmt=elf em=netware ;;
+ ;;
+ ppc-*-solaris*)
+ if test ${this_target} = $target; then
+ AC_DEFINE(TARGET_SOLARIS_COMMENT, 1,
+ [Define if default target is PowerPC Solaris.])
+ fi
+ if test x${endian} = xbig; then
+ AC_MSG_ERROR(Solaris must be configured little endian)
+ fi
+ ;;
+
+ sh*-*-symbianelf*)
+ AC_DEFINE(TARGET_SYMBIAN, 1, [Define if target is Symbian OS.])
+ ;;
esac
if test ${this_target} = $target ; then
fi
fi
- case ${cpu_type}-${fmt} in
- alpha*-* | arm-* | i386-* | ia64*-* | mips-* | ns32k-* \
- | pdp11-* | ppc-* | sparc-* | strongarm-* | xscale-* \
- | *-elf | *-ecoff | *-som)
- bfd_gas=yes ;;
- esac
-
# Other random stuff.
case ${cpu_type} in
mips64* | mipsisa64* | mipsisa32*)
changequote(,)dnl
mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..//' -e 's/el$//'`
+changequote([,])dnl
+ ;;
+ mips*)
+changequote(,)dnl
+ mips_cpu=`echo $target_cpu | sed -e 's/^mips//' -e 's/el$//'`
changequote([,])dnl
;;
*)
- AC_ERROR($target_cpu isn't a supported MIPS CPU name)
+ AC_MSG_ERROR($target_cpu isn't a supported MIPS CPU name)
;;
esac
# See whether it's appropriate to set E_MIPS_ABI_O32 for o32
# binaries. It's a GNU extension that some OSes don't understand.
- # The value only matters on ELF targets.
case ${target} in
*-*-irix*)
use_e_mips_abi_o32=0
esac
# Decide which ABI to target by default.
case ${target} in
- mips64*-linux* | mips-sgi-irix6*)
+ mips64*-linux* | mips-sgi-irix6* | mips64*-freebsd* | mips64*-kfreebsd*-gnu)
mips_default_abi=N32_ABI
;;
- mips*-linux*)
+ mips*-linux* | mips*-freebsd* | mips*-kfreebsd*-gnu)
mips_default_abi=O32_ABI
;;
+ mips64*-openbsd*)
+ mips_default_abi=N64_ABI
+ ;;
*)
mips_default_abi=NO_ABI
;;
# Do we need the opcodes library?
case ${cpu_type} in
- vax | i386 | tic30)
+ vax | tic30)
;;
*)
*opcodes*) shared_opcodes=true ;;
*) shared_opcodes=false ;;
esac
- if test "${shared_opcodes}" = "true"; then
- # A shared libopcodes must be linked against libbfd.
- need_bfd=yes
- fi
;;
esac
# Any other special object files needed ?
case ${cpu_type} in
- fr30 | ip2k | iq2000 | m32r | openrisc)
+
+ bfin)
+ echo ${extra_objects} | grep -s "bfin-parse.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects bfin-parse.o"
+ fi
+
+ echo ${extra_objects} | grep -s "bfin-lex-wrapper.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects bfin-lex-wrapper.o"
+ fi
+ ;;
+
+ epiphany | fr30 | ip2k | iq2000 | lm32 | m32r | openrisc)
using_cgen=yes
;;
+ m32c)
+ using_cgen=yes
+ ;;
frv)
using_cgen=yes
;;
esac
;;
+ mep)
+ using_cgen=yes
+ ;;
+
mips)
- echo ${extra_objects} | grep -s "itbl-parse.o"
+ echo ${extra_objects} | grep -s "itbl-parse.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects itbl-parse.o"
fi
- echo ${extra_objects} | grep -s "itbl-lex.o"
+ echo ${extra_objects} | grep -s "itbl-lex-wrapper.o"
if test $? -ne 0 ; then
- extra_objects="$extra_objects itbl-lex.o"
+ extra_objects="$extra_objects itbl-lex-wrapper.o"
fi
- echo ${extra_objects} | grep -s "itbl-ops.o"
+ echo ${extra_objects} | grep -s "itbl-ops.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects itbl-ops.o"
fi
;;
+ mt)
+ using_cgen=yes
+ ;;
+
+ nds32)
+ # Decide BASELINE, REDUCED_REGS, FPU_DP_EXT, FPU_SP_EXT features
+ # based on arch_name.
+ AC_MSG_CHECKING(for default configuration of --with-arch)
+ if test "x${with_arch}" != x; then
+ case ${with_arch} in
+ v2j | v2s | v2f | v2 | v3m | v3j | v3s | v3f | v3 )
+ AC_DEFINE_UNQUOTED(NDS32_DEFAULT_ARCH_NAME, "$with_arch",
+ [Define value for nds32_arch_name])
+ ;;
+ *)
+ AC_MSG_ERROR(This kind of arch name does *NOT* exist!)
+ ;;
+ esac
+ fi
+ AC_MSG_RESULT($with_arch)
+
+ # Decide features one by one.
+ AC_MSG_CHECKING(for default configuration of --enable-dx-regs)
+ if test "x${enable_dx_regs}" == xyes; then
+ AC_DEFINE(NDS32_DEFAULT_DX_REGS, 1,
+ [Define value for nds32_dx_regs])
+ else
+ AC_DEFINE(NDS32_DEFAULT_DX_REGS, 0,
+ [Define default value for nds32_dx_regs])
+ fi
+ AC_MSG_RESULT($enable_dx_regs)
+
+ AC_MSG_CHECKING(for default configuration of --enable-perf-ext)
+ if test "x${enable_perf_ext}" == xno; then
+ AC_DEFINE(NDS32_DEFAULT_PERF_EXT, 0,
+ [Define value for nds32_perf_ext])
+ else
+ AC_DEFINE(NDS32_DEFAULT_PERF_EXT, 1,
+ [Define default value for nds32_perf_ext])
+ fi
+ AC_MSG_RESULT($enable_perf_ext)
+
+ AC_MSG_CHECKING(for default configuration of --enable-perf-ext2)
+ if test "x${enable_perf_ext2}" == xno; then
+ AC_DEFINE(NDS32_DEFAULT_PERF_EXT2, 0,
+ [Define value for nds32_perf_ext2])
+ else
+ AC_DEFINE(NDS32_DEFAULT_PERF_EXT2, 1,
+ [Define default value for nds32_perf_ext2])
+ fi
+ AC_MSG_RESULT($enable_perf_ext2)
+
+ AC_MSG_CHECKING(for default configuration of --enable-string-ext)
+ if test "x${enable_string_ext}" == xno; then
+ AC_DEFINE(NDS32_DEFAULT_STRING_EXT, 0,
+ [Define value for nds32_string_ext])
+ else
+ AC_DEFINE(NDS32_DEFAULT_STRING_EXT, 1,
+ [Define default value for nds32_string_ext])
+ fi
+ AC_MSG_RESULT($enable_string_ext)
+
+ AC_MSG_CHECKING(for default configuration of --enable-audio-ext)
+ if test "x${enable_audio_ext}" == xno; then
+ AC_DEFINE(NDS32_DEFAULT_AUDIO_EXT, 0,
+ [Define value for nds32_audio_ext])
+ else
+ AC_DEFINE(NDS32_DEFAULT_AUDIO_EXT, 1,
+ [Define default value for nds32_audio_ext])
+ fi
+ AC_MSG_RESULT($enable_audio_ext)
+ ;;
+
i386 | s390 | sparc)
if test $this_target = $target ; then
AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.])
fi
;;
+ rl78)
+ echo ${extra_objects} | grep -s "rl78-parse.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects rl78-parse.o"
+ fi
+ ;;
+
+ rx)
+ echo ${extra_objects} | grep -s "rx-parse.o"
+ if test $? -ne 0 ; then
+ extra_objects="$extra_objects rx-parse.o"
+ fi
+ ;;
+
xstormy16)
using_cgen=yes
;;
+ xc16x)
+ using_cgen=yes
+ ;;
+
xtensa)
echo ${extra_objects} | grep -s "xtensa-relax.o"
if test $? -ne 0 ; then
# See if we really can support this configuration with the emulation code.
if test $this_target = $target ; then
- primary_bfd_gas=$bfd_gas
obj_format=$fmt
te_file=$em
-
- if test $bfd_gas = no ; then
- # Can't support other configurations this way.
- break
- fi
- elif test $bfd_gas = no ; then
- # Can't support this configuration.
- break
fi
+ case ${te_file} in
+ vms) extra_objects="$extra_objects te-vms.o" ;;
+ esac
+
# From target name and format, produce a list of supported emulations.
case ${generic_target}-${fmt} in
- mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
- mips*-*-linux*-*) case "$endian" in
+ mips-*-*-*) case "$endian" in
big) emulation="mipsbelf mipslelf mipself" ;;
*) emulation="mipslelf mipsbelf mipself" ;;
esac ;;
- mips-*-lnews*-ecoff) ;;
- mips-*-*-ecoff) case "$endian" in
- big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
- *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
- esac ;;
- mips-*-*-elf) case "$endian" in
- big) emulation="mipsbelf mipslelf mipself" ;;
- *) emulation="mipslelf mipsbelf mipself" ;;
- esac ;;
- mips-*-sysv4*MP*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
# i386-pc-pe-coff != i386-pc-coff.
i386-*-pe-coff) ;;
# Uncommenting the next line will turn on support for i386 AOUT
;;
esac
;;
+ x86_64)
+ case ${obj_format} in
+ aout)
+ emulations="$emulations i386coff i386elf"
+ ;;
+ coff)
+ emulations="$emulations i386aout i386elf"
+ ;;
+ elf)
+ emulations="$emulations i386aout i386coff"
+ ;;
+ esac
+ ;;
esac
fi
+# PE code has way too many macros tweaking behaviour
+case ${te_file} in
+ pe*) emulations="" ;;
+esac
+
# Assign floating point type. Most processors with FP support
# IEEE FP. On those that don't support FP at all, usually IEEE
# is emulated.
case ${target_cpu} in
- vax | tahoe ) atof=${target_cpu} ;;
- pdp11) atof=vax ;;
+ vax | pdp11 ) atof=vax ;;
*) atof=ieee ;;
esac
AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
fi
-case ${user_bfd_gas}-${primary_bfd_gas} in
- yes-yes | no-no)
- # We didn't override user's choice.
- ;;
- no-yes)
- AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
- ;;
- no-preferred)
- primary_bfd_gas=no
- ;;
- *-preferred)
- primary_bfd_gas=yes
- ;;
- yes-*)
- primary_bfd_gas=yes
- ;;
- -*)
- # User specified nothing.
- ;;
-esac
-
# Some COFF configurations want these random other flags set.
case ${obj_format} in
coff)
i386) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;;
m68k) AC_DEFINE(M68KCOFF, 1, [Using m68k COFF?]) ;;
m88k) AC_DEFINE(M88KCOFF, 1, [Using m88k COFF?]) ;;
+ x86_64) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;;
esac
;;
esac
# Getting this done right is going to be a bitch. Each configuration specified
-# with --enable-targets=... should be checked for environment, format, cpu, and
-# bfd_gas setting.
+# with --enable-targets=... should be checked for environment, format, cpu
+# setting.
#
# For each configuration, the necessary object file support code must be linked
# in. This might be only one, it might be up to four. The necessary emulation
#
# And then there's "--enable-targets=all"....
#
-# For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
+# For now, just always do it for MIPS ELF configurations. Sigh.
formats="${obj_format}"
emfiles=""
.) continue ;;
mipsbelf | mipslelf | mipself)
fmt=elf file=mipself ;;
- mipsbecoff | mipslecoff | mipsecoff)
- fmt=ecoff file=mipsecoff ;;
*coff)
fmt=coff file=$em ;;
*aout)
ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF, 1, [ECOFF support?]) ;;
elf) AC_DEFINE(OBJ_MAYBE_ELF, 1, [ELF support?]) ;;
generic) AC_DEFINE(OBJ_MAYBE_GENERIC, 1, [generic support?]) ;;
- hp300) AC_DEFINE(OBJ_MAYBE_HP300, 1, [HP300 support?]) ;;
- ieee) AC_DEFINE(OBJ_MAYBE_IEEE, 1, [IEEE support?]) ;;
som) AC_DEFINE(OBJ_MAYBE_SOM, 1, [SOM support?]) ;;
- vms) AC_DEFINE(OBJ_MAYBE_VMS, 1, [VMS support?]) ;;
esac
extra_objects="$extra_objects obj-$fmt.o"
done
fi
if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
DEFAULT_EMULATION=`set . $emulations ; echo $2`
- # e-mips* has more than one emulation per file, e-i386* has just one at the
+ # e-mipself has more than one emulation per file, e-i386* has just one at the
# moment. If only one emulation is specified, then don't define
# USE_EMULATIONS or include any of the e-files as they will only be bloat.
case "${obj_format}${emfiles}" in
- multi* | *mips*)
+ multi* | *mipself*)
extra_objects="$extra_objects $emfiles"
AC_DEFINE(USE_EMULATIONS, 1, [Use emulation support?]) ;;
esac
AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION",
[Default emulation.])
-case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
- yes-*-coff) need_bfd=yes ;;
- no-*-coff) need_bfd=yes
- AC_DEFINE(MANY_SEGMENTS, 1, [old COFF support?]) ;;
-esac
-
reject_dev_configs=yes
case ${reject_dev_configs}-${dev} in
AC_SUBST(atof)
dnl AC_SUBST(emulation)
-case "${primary_bfd_gas}" in
- yes) AC_DEFINE(BFD_ASSEMBLER, 1, [Use BFD interface?])
- need_bfd=yes ;;
-esac
-
# do we need the opcodes library?
case "${need_opcodes}" in
yes)
;;
esac
-case "${need_bfd}" in
-yes)
- BFDLIB=../bfd/libbfd.la
- BFDVER_H=../bfd/bfdver.h
- ALL_OBJ_DEPS="$ALL_OBJ_DEPS"' ../bfd/bfd.h $(INCDIR)/symcat.h'
- ;;
-esac
-
-AC_SUBST(BFDLIB)
AC_SUBST(OPCODES_LIB)
-AC_SUBST(BFDVER_H)
-AC_SUBST(ALL_OBJ_DEPS)
-
AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}", [Target alias.])
AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}", [Canonical target.])
AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}", [Target CPU.])
AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}", [Target vendor.])
AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}", [Target OS.])
-AC_PROG_CC
-
AC_PROG_YACC
AM_PROG_LEX
-ALL_LINGUAS="fr tr es"
-CY_GNU_GETTEXT
+ALL_LINGUAS="fr tr es rw id ru fi ja"
+ZW_GNU_GETTEXT_SISTER_DIR
+AM_PO_SUBDIRS
AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
AC_EXEEXT
-AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
+AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h errno.h sys/types.h limits.h locale.h time.h sys/stat.h)
+ACX_HEADER_STRING
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
AC_MSG_RESULT($cross_gas)
dnl ansidecl.h will deal with const
-dnl AC_CONST
+dnl AC_C_CONST
AC_FUNC_ALLOCA
AC_C_INLINE
# VMS doesn't have unlink.
AC_CHECK_FUNCS(unlink remove, break)
+AC_CHECK_FUNCS(sbrk setlocale)
-# Some systems don't have sbrk().
-AC_CHECK_FUNCS(sbrk)
+AM_LC_MESSAGES
# do we need the math library?
case "${need_libm}" in
-yes)
- AC_CHECK_LIBM
+yes)
+ LT_LIB_M
AC_SUBST(LIBM)
;;
esac
#include <unistd.h>
#endif
"
-GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers)
# Does errno.h declare errno, or do we have to add a separate declaration
# for it?
#endif
])
+AC_MSG_CHECKING(for a known getopt prototype in unistd.h)
+AC_CACHE_VAL(gas_cv_decl_getopt_unistd_h,
+[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <unistd.h>], [extern int getopt (int, char *const*, const char *);])],
+gas_cv_decl_getopt_unistd_h=yes, gas_cv_decl_getopt_unistd_h=no)])
+AC_MSG_RESULT($gas_cv_decl_getopt_unistd_h)
+if test $gas_cv_decl_getopt_unistd_h = yes; then
+ AC_DEFINE([HAVE_DECL_GETOPT], 1,
+ [Is the prototype for getopt in <unistd.h> in the expected format?])
+fi
+
+GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(ffs, f, int (*f)(int), $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
+
+AC_CHECK_DECLS([free, getenv, malloc, mempcpy, realloc, stpcpy, strstr, vsnprintf])
+
+BFD_BINARY_FOPEN
+
+# Link in zlib if we can. This allows us to write compressed debug sections.
+AM_ZLIB
+
+# Support for VMS timestamps via cross compile
+
+if test "$ac_cv_header_time_h" = yes; then
+ GAS_HAVE_TIME_TYPE_MEMBER(struct tm, tm_gmtoff)
+fi
+
+if test "$ac_cv_header_sys_stat_h" = yes; then
+ GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_sec)
+ GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_nsec)
+fi
+
+
+dnl Required for html, pdf, install-pdf and install-html targets.
+AC_SUBST(datarootdir)
+AC_SUBST(docdir)
+AC_SUBST(htmldir)
+AC_SUBST(pdfdir)
+
dnl This must come last.
dnl We used to make symlinks to files in the source directory, but now
echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h
if test "x$cgen_cpu_prefix" != x ; then
echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h
- fi
-
- sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile],
+ fi],
[target_cpu_type=${target_cpu_type}
cgen_cpu_prefix=${cgen_cpu_prefix}
obj_format=${obj_format}