dnl And be careful when changing it! If you must add tests with square
dnl brackets, be sure changequote invocations surround it.
dnl
-dnl Remember to use "dnl" in each line before the AC_INIT call...
dnl
+AC_PREREQ(2.3)dnl We only need 2.0, but pre-2.3 loses on some AIX version.
+AC_INIT(as.h)dnl
dnl
-AC_INIT(as.h)
-dnl
-bfd_gas=no
user_bfd_gas=
AC_ARG_ENABLE(bfd-assembler,
[ bfd-assembler use BFD back end for writing object files],
no) user_bfd_gas=no ;;
*) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
esac])dnl
+AC_ARG_ENABLE(targets,
+[ targets alternative target configurations besides the primary],
+[case "${enableval}" in
+ yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac])dnl
# Generate a header file -- gets more post-processing by Makefile later.
AC_CONFIG_HEADER(conf)
dnl For recursion to work right, this must be an absolute pathname.
AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
AC_CANONICAL_SYSTEM
-AC_PROGRAM_TRANSFORM_NAME
+AC_ARG_PROGRAM
-emulation=generic
+te_file=generic
# assign cpu type
# check for architecture variants
case ${target_cpu} in
+ armeb) cpu_type=arm endian=big ;;
+ arm*) cpu_tpye=arm endian=little ;;
hppa*) cpu_type=hppa ;;
changequote(,)dnl
i[45]86) cpu_type=i386 ;;
m8*) cpu_type=m88k ;;
mips*el) cpu_type=mips endian=little;;
mips*) cpu_type=mips endian=big ;;
- powerpc*) cpu_type=ppc ;;
+ powerpcle*) cpu_type=ppc endian=little ;;
+ powerpc*) cpu_type=ppc endian=big ;;
rs6000*) cpu_type=ppc ;;
- sparc64) cpu_type=sparc obj_format=elf AC_DEFINE(sparcv9) ;;
+ sparc64) cpu_type=sparc obj_format=elf
+ AC_DEFINE(sparcv9) ;;
sparclite*) cpu_type=sparc ;;
*) cpu_type=${target_cpu} ;;
esac
AC_SUBST(OPCODES_LIB)
gas_target=${cpu_type}
-generic_target=${cpu_type}-${target_vendor}-${target_os}
-dev=no
-
-# assign object format
-case ${generic_target} in
- a29k-amd-udi) obj_format=coff gas_target=ebmon29k ;;
- a29k-amd-ebmon) obj_format=coff gas_target=ebmon29k ;;
-
- alpha-*-netware*) obj_format=ecoff ;;
- alpha-*-osf*) obj_format=ecoff ;;
-
- arm-*-riscix*) obj_format=aout bfd_gas=yes ;;
-
- hppa-*-*elf*) obj_format=elf emulation=hppa ;;
- hppa-*-osf*) obj_format=som emulation=hppa ;;
- hppa-*-hpux*) obj_format=som emulation=hppa ;;
- hppa-*-bsd*) obj_format=som emulation=hppa ;;
- hppa-*-hiux*) obj_format=som emulation=hppa ;;
-
- h8300-*-coff) obj_format=coff ;;
-
- i386-ibm-aix*) obj_format=coff gas_target=i386coff
- emulation=i386aix ;;
- i386-*-bsd*) obj_format=aout emulation=386bsd ;;
- i386-*-netbsd0.8) obj_format=aout emulation=386bsd ;;
- i386-*-netbsd*) obj_format=aout emulation=netbsd ;;
- i386-*-linux*elf*) obj_format=elf emulation=linux ;;
- i386-*-linux*coff*) obj_format=coff emulation=linux
- gas_target=i386coff ;;
- i386-*-linux*) obj_format=aout emulation=linux bfd_gas=preferred ;;
- i386-*-lynxos*) obj_format=coff gas_target=i386coff
- emulation=lynx ;;
- i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
- obj_format=elf ;;
- i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
- obj_format=coff gas_target=i386coff ;;
- i386-*-vsta) obj_format=aout ;;
- i386-*-go32) obj_format=coff gas_target=i386coff ;;
- i386-*-mach* | i386-*-gnu*)
- obj_format=aout emulation=mach bfd_gas=yes ;;
-
- i960-*-bout) obj_format=bout ;;
- i960-*-coff) obj_format=coff emulation=ic960 gas_target=ic960coff ;;
- i960-*-nindy*) obj_format=bout ;;
- i960-*-vxworks4*) obj_format=bout ;;
- i960-*-vxworks5.0) obj_format=bout ;;
- i960-*-vxworks5.*) obj_format=coff emulation=ic960 gas_target=ic960coff ;;
- i960-*-vxworks*) obj_format=bout ;;
-
- m68k-wrs-vxworks | m68k-ericsson-ose | m68k-*-sunos*)
- obj_format=aout emulation=sun3 ;;
- m68k-motorola-sysv) obj_format=coff gas_target=m68kcoff emulation=delta ;;
- m68k-bull-sysv3*) obj_format=coff gas_target=m68kcoff emulation=dpx2 ;;
- m68k-apollo-*) obj_format=coff gas_target=apollo emulation=apollo ;;
- m68k-*-coff | m68k-*-sysv*)
- obj_format=coff gas_target=m68kcoff ;;
- m68k-*-hpux) obj_format=hp300 emulation=hp300 ;;
- m68k-*-lynxos*) obj_format=coff gas_target=m68kcoff
- emulation=lynx ;;
-
- m88k-*-coff*) obj_format=coff gas_target=m88kcoff ;;
-
- # don't change emulation like *-*-bsd does
- mips-*-bsd*) bfd_gas=yes obj_format=aout gas_target=mips-lit ;;
- mips-*-ultrix*) obj_format=ecoff gas_target=mips-lit ;;
- mips-*-ecoff*) obj_format=ecoff
- case "$endian" in
- big) gas_target=mips-big ;;
- *) gas_target=mips-lit ;;
- esac
- ;;
- mips-*-ecoff*) obj_format=ecoff gas_target=mips-big ;;
- mips-*-irix5*) obj_format=elf gas_target=mips-big ;;
- mips-*-irix*) obj_format=ecoff gas_target=mips-big ;;
- mips-*-riscos*) obj_format=ecoff gas_target=mips-big ;;
- mips-*-sysv*) obj_format=ecoff gas_target=mips-big ;;
- mips-*-elf*) obj_format=elf
- case "$endian" in
- big) gas_target=mips-big ;;
- *) gas_target=mips-lit ;;
- esac
- ;;
- ppc-*-aix*) obj_format=coff bfd_gas=yes ;;
- ppc-*-elf*) obj_format=elf bfd_gas=yes ;;
- ppc-*-netware*) obj_format=elf emulation=ppcnw ;;
- ppc-*-sysv4*) obj_format=elf bfd_gas=yes ;;
-
- sh-*-coff) obj_format=coff ;;
-
- ns32k-pc532-mach*) obj_format=aout emulation=pc532 bfd_gas=yes ;;
- ns32k-pc532-netbsd*) obj_format=aout emulation=netbsd532 bfd_gas=yes ;;
-
- sparc*-*-sunos4*) obj_format=aout emulation=sun3 bfd_gas=yes ;;
- sparc*-*-aout | sparc*-*-vxworks)
- obj_format=aout bfd_gas=yes ;;
- sparc*-*-coff) obj_format=coff bfd_gas=yes ;;
- sparc*-*-lynxos*) obj_format=coff bfd_gas=yes emulation=lynx ;;
- sparc*-fujitsu-none) obj_format=aout bfd_gas=yes ;;
- sparc*-*-elf | sparc*-*-solaris*)
- obj_format=elf ;;
-
- vax-*-bsd* | vax-*-ultrix*)
- obj_format=aout ;;
- vax-*-vms) obj_format=vms ;;
-
- z8k-*-coff | z8k-*-sim)
- obj_format=coff ;;
-
- *-*-aout | *-*-scout)
- obj_format=aout ;;
- *-*-nindy*)
- obj_format=bout ;;
- *-*-bsd*)
- obj_format=aout emulation=sun3 ;;
- *-*-generic) obj_format=generic ;;
- *-*-xray | *-*-hms) obj_format=coff ;;
- *-*-sim) obj_format=coff ;;
- *-*-elf | *-*-sysv4* | *-*-solaris*)
- AC_MSG_WARN(GAS support for ELF format is incomplete)
- obj_format=elf dev=yes ;;
- *-*-vxworks) obj_format=aout ;;
- *-*-netware) obj_format=elf ;;
-esac
+this_target=${generic_target}
+
+canon_targets=""
+if test -n "$enable_targets" ; then
+ for t in `echo $enable_targets | sed 's/,/ /g'`; do
+ result=`$ac_config_sub $t 2>/dev/null`
+ if test -n "$result" ; then
+ canon_targets="$canon_targets $result"
+# else
+# # Permit "all", etc. We don't support it yet though.
+# canon_targets="$canon_targets $t"
+ fi
+ done
+ GAS_UNIQ(canon_targets)
+fi
+
+emulations=""
+
+for this_target in $target $canon_targets ; do
+
+ eval `echo $this_target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
+
+ # check for architecture variants
+ case ${cpu} in
+ hppa*) cpu_type=hppa ;;
+changequote(,)dnl
+ i[45]86) cpu_type=i386 ;;
+ m680[012346]0) cpu_type=m68k ;;
+ m68008) cpu_type=m68k ;;
+ m683??) cpu_type=m68k ;;
+changequote([,])dnl
+ m8*) cpu_type=m88k ;;
+ mips*el) cpu_type=mips endian=little;;
+ mips*) cpu_type=mips endian=big ;;
+ powerpcle*) cpu_type=ppc endian=little ;;
+ powerpc*) cpu_type=ppc endian=big ;;
+ rs6000*) cpu_type=ppc ;;
+ sparc64) cpu_type=sparc obj_format=elf want_sparcv9=true ;;
+ sparclite*) cpu_type=sparc ;;
+ *) cpu_type=${target_cpu} ;;
+ esac
+
+ if test ${this_target} = $target ; then
+ target_cpu_type=${cpu_type}
+ elif test ${target_cpu_type} != ${cpu_type} ; then
+ continue
+ fi
+
+ targ=${cpu_type}
+ generic_target=${cpu_type}-$vendor-$os
+ dev=no
+ bfd_gas=no
+ em=generic
+
+ # assign object format
+ case ${generic_target} in
+ a29k-amd-udi) fmt=coff targ=ebmon29k ;;
+ a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
+ a29k-*-vxworks*) fmt=coff ;;
+
+ alpha-*-netware*) fmt=ecoff ;;
+ alpha-*-osf*) fmt=ecoff ;;
+
+# start-sanitize-arc
+ arc-*-elf*) fmt=elf bfd_gas=yes ;;
+# end-sanitize-arc
+
+ arm-*-riscix*) fmt=aout targ=arm-lit
+ emulation=riscix ;;
+ arm-*-aout) fmt=aout
+ case "$endian" in
+ big) targ=arm-big ;;
+ *) targ=arm-lit ;;
+ esac
+ ;;
+ arm-*-riscix*) fmt=aout ;;
+ arm-*-pe) fmt=coff targ=armcoff em=pe ;;
+
+ hppa-*-*elf*) fmt=elf em=hppa ;;
+ hppa-*-lites*) fmt=elf em=hppa ;;
+ hppa-*-osf*) fmt=som em=hppa ;;
+ hppa-*-hpux*) fmt=som em=hppa ;;
+ hppa-*-bsd*) fmt=som em=hppa ;;
+ hppa-*-hiux*) fmt=som em=hppa ;;
+
+ h8300-*-coff) fmt=coff ;;
+
+ i386-ibm-aix*) fmt=coff targ=i386coff
+ em=i386aix ;;
+ i386-*-bsd*) fmt=aout em=386bsd ;;
+ i386-*-netbsd0.8) fmt=aout em=386bsd ;;
+ i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
+ i386-*-linux*aout*) fmt=aout em=linux ;;
+ i386-*-linux*coff*) fmt=coff em=linux
+ targ=i386coff ;;
+ i386-*-linux*) fmt=elf em=linux ;;
+ i386-*-lynxos*) fmt=coff targ=i386coff
+ em=lynx ;;
+ i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
+ fmt=elf ;;
+ i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
+ fmt=coff targ=i386coff ;;
+ i386-*-vsta) fmt=aout ;;
+ i386-*-go32) fmt=coff targ=i386coff ;;
+ i386-*-gnu*elf*) fmt=elf ;;
+ i386-*-mach* | i386-*-gnu*)
+ fmt=aout em=mach bfd_gas=yes ;;
+ i386-*-msdos*) fmt=aout ;;
+ i386-*-pe) fmt=coff targ=i386coff em=pe ;;
+ i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
+ i960-*-bout) fmt=bout ;;
+ i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
+ i960-*-nindy*) fmt=bout ;;
+ i960-*-vxworks4*) fmt=bout ;;
+ i960-*-vxworks5.0) fmt=bout ;;
+ i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
+ i960-*-vxworks*) fmt=bout ;;
+
+ m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
+ fmt=aout em=sun3 ;;
+ m68k-motorola-sysv) fmt=coff targ=m68kcoff em=delta ;;
+ m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
+ m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
+ m68k-*-coff | m68k-*-sysv*)
+ fmt=coff targ=m68kcoff ;;
+ m68k-*-elf) fmt=elf ;;
+ m68k-*-hpux*) fmt=hp300 em=hp300 ;;
+ m68k-*-lynxos*) fmt=coff targ=m68kcoff
+ em=lynx ;;
+ m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+
+ m88k-*-coff*) fmt=coff targ=m88kcoff ;;
+
+ # don't change em like *-*-bsd does
+ mips-dec-bsd*) fmt=aout targ=mips-lit ;;
+ mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
+ mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
+ mips-*-ultrix*) fmt=ecoff targ=mips-lit ;;
+ mips-*-ecoff*) fmt=ecoff
+ case "$endian" in
+ big) targ=mips-big ;;
+ *) targ=mips-lit ;;
+ esac
+ ;;
+ mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
+ mips-*-gnu*) fmt=aout
+ case "$endian" in
+ big) targ=mips-big ;;
+ *) targ=mips-lit ;;
+ esac
+ ;;
+ mips-*-irix5*) fmt=elf targ=mips-big ;;
+ mips-*-irix*) fmt=ecoff targ=mips-big ;;
+ mips-*-riscos*) fmt=ecoff targ=mips-big ;;
+ mips-*-sysv*) fmt=ecoff targ=mips-big ;;
+ mips-*-elf*) fmt=elf
+ case "$endian" in
+ big) targ=mips-big ;;
+ *) targ=mips-lit ;;
+ esac
+ ;;
+ ppc-*-aix*) fmt=coff ;;
+ ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
+ fmt=elf
+ case "$endian" in
+ big) targ=ppc-big ;;
+ *) targ=ppc-lit ;;
+ esac
+ ;;
+ ppc-*-netware*) fmt=elf em=ppcnw ;;
+
+ sh-*-coff) fmt=coff ;;
+
+# start-sanitize-rce
+ rce-*-aout) fmt=aout ;;
+# end-sanitize-rce
+
+ ns32k-pc532-mach*) fmt=aout em=pc532mach ;;
+ ns32k-pc532-netbsd*) fmt=aout em=nbsd532 ;;
+
+ sparc-*-sunos4*) fmt=aout em=sun3 ;;
+ sparc-*-aout | sparc*-*-vxworks)
+ fmt=aout ;;
+ sparc-*-coff) fmt=coff ;;
+ sparc-*-lynxos*) fmt=coff em=lynx ;;
+ sparc-fujitsu-none) fmt=aout ;;
+ sparc-*-elf | sparc*-*-solaris*)
+ fmt=elf ;;
+ sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
+
+ vax-*-bsd* | vax-*-ultrix*)
+ fmt=aout ;;
+ vax-*-vms) fmt=vms ;;
+
+ z8k-*-coff | z8k-*-sim)
+ fmt=coff ;;
+
+ w65-*-*) fmt=coff ;;
+
+ *-*-aout | *-*-scout)
+ fmt=aout ;;
+ *-*-nindy*)
+ fmt=bout ;;
+ *-*-bsd*)
+ fmt=aout em=sun3 ;;
+ *-*-generic) fmt=generic ;;
+ *-*-xray | *-*-hms) fmt=coff ;;
+ *-*-sim) fmt=coff ;;
+ *-*-elf | *-*-sysv4* | *-*-solaris*)
+ AC_MSG_WARN(GAS support for ELF format is incomplete.)
+ fmt=elf dev=yes ;;
+ *-*-vxworks) fmt=aout ;;
+ *-*-netware) fmt=elf ;;
+ esac
+
+ case ${cpu_type}-${fmt} in
+ arm-*) bfd_gas=yes ;;
+ # not yet
+ # i386-aout) bfd_gas=preferred ;;
+ mips-*) bfd_gas=yes ;;
+ ns32k-*) bfd_gas=yes ;;
+ ppc-*) bfd_gas=yes ;;
+ sparc-*) bfd_gas=yes ;;
+ *-elf) bfd_gas=yes ;;
+ *-ecoff) bfd_gas=yes ;;
+ *-som) bfd_gas=yes ;;
+ *) ;;
+ esac
+
+# See if we really can support this configuration with the emulation code.
+
+ if test $this_target = $target ; then
+ primary_bfd_gas=$bfd_gas
+ obj_format=$fmt
+ gas_target=$targ
+ te_file=$em
+
+ if test $bfd_gas = no ; then
+ # Can't support other configurations this way.
+ break
+ fi
+ elif test $bfd_gas = no ; then
+ # Can't support this configuration.
+ break
+ fi
+
+# From target name and format, produce a list of supported emulations.
+
+ case ${generic_target}-${fmt} in
+ mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
+ mips-*-*-ecoff) case "$endian" in
+ big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
+ *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
+ esac ;;
+ mips-*-*-elf) case "$endian" in
+ big) emulation="mipsbelf mipslelf mipself" ;;
+ *) emulation="mipslelf mipsbelf mipself" ;;
+ esac ;;
+ esac
+
+ emulations="$emulations $emulation"
+
+# Other random stuff.
+
+ test -n "$want_sparcv9" && AC_DEFINE(sparcv9)
+
+done
# Assign floating point type. Most processors with FP support
# IEEE FP. On those that don't support FP at all, usually IEEE
# is emulated.
case ${target_cpu} in
vax | tahoe ) atof=${target_cpu} ;;
- *) atof=ieee ;;
+ *) atof=ieee ;;
esac
case "${obj_format}" in
# and target makefile frag
target_frag=${srcdir}/config/${gas_target}.mt
+if test ! -r ${target_frag}; then
+ target_frag=/dev/null # ick! but subst_file can't be conditionalized
+fi
AC_SUBST_FILE(target_frag)
-case ${cpu_type}-${obj_format} in
-# not yet
-# i386-aout) bfd_gas=preferred ;;
- *-elf) bfd_gas=yes ;;
- *-ecoff) bfd_gas=yes ;;
- *-som) bfd_gas=yes ;;
- *) ;;
-esac
-
-case ${user_bfd_gas}-${bfd_gas} in
+case ${user_bfd_gas}-${primary_bfd_gas} in
yes-yes | no-no)
# We didn't override user's choice.
;;
AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
;;
no-preferred)
- bfd_gas=no
+ primary_bfd_gas=no
;;
*-preferred)
- bfd_gas=yes
+ primary_bfd_gas=yes
+ ;;
+ yes-*)
+ primary_bfd_gas=yes
;;
-*)
# User specified nothing.
;;
esac
-case ${bfd_gas}-${cpu_type}-${obj_format} in
+# Some COFF configurations want these random other flags set.
+case ${obj_format} in
+ coff)
+ case ${target_cpu_type} in
+ i386) AC_DEFINE(I386COFF) ;;
+ m68k) AC_DEFINE(M68KCOFF) ;;
+ m88k) AC_DEFINE(M88KCOFF) ;;
+ esac
+ ;;
+esac
+
+# Getting this done right is going to be a bitch. Each configuration specified
+# with --enable-targets=... should be checked for environment, format, cpu, and
+# bfd_gas setting.
+#
+# For each configuration, the necessary object file support code must be linked
+# in. This might be only one, it might be up to four. The necessary emulation
+# code needs to be provided, too.
+#
+# And then there's "--enable-targets=all"....
+#
+# For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
+
+formats="${obj_format}"
+emfiles=""
+EMULATIONS=""
+GAS_UNIQ(emulations)
+for em in . $emulations ; do
+ case $em in
+ .) continue ;;
+ mipsbelf | mipslelf)
+ fmt=elf file=mipself ;;
+ mipsbecoff | mipslecoff)
+ fmt=ecoff file=mipsecoff ;;
+ esac
+ formats="$formats $fmt"
+ emfiles="$emfiles e-$file.o"
+ EMULATIONS="$EMULATIONS &$em,"
+done
+GAS_UNIQ(formats)
+GAS_UNIQ(emfiles)
+if test `set . $formats ; shift ; echo $#` -gt 1 ; then
+ for fmt in $formats ; do
+ case $fmt in
+ aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
+ bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
+ coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
+ ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
+ elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
+ generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
+ hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
+ ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
+ som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
+ vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
+ esac
+ extra_objects="$extra_objects obj-$fmt.o"
+ done
+ obj_format=multi
+fi
+if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
+ te_file=multi
+ extra_objects="$extra_objects $emfiles"
+ DEFAULT_EMULATION=`set . $emulations ; echo $2`
+ AC_DEFINE(USE_EMULATIONS)
+fi
+AC_SUBST(extra_objects)
+AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
+AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
+
+files="config/tc-${cpu_type}.c config/tc-${cpu_type}.h \
+ config/obj-${obj_format}.h config/obj-${obj_format}.c \
+ config/te-${te_file}.h config/atof-${atof}.c \
+ $extra_files"
+links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
+ $extra_links"
+
+case ${primary_bfd_gas}-${cpu_type}-${obj_format} in
yes-*-coff) need_bfd=yes ;;
no-*-coff) need_bfd=yes
AC_DEFINE(MANY_SEGMENTS) ;;
;;
esac
-dnl Looks like the AC_MAKE_LINKS string is taken literally and put into the
-dnl config.status file. So the necessary variables also have to be
-dnl exported.
-AC_SUBST(cpu_type) AC_SUBST(obj_format) AC_SUBST(emulation) AC_SUBST(atof)
-AC_LINK_FILES(targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c,
- config/tc-${cpu_type}.c config/tc-${cpu_type}.h \
- config/obj-${obj_format}.h config/obj-${obj_format}.c \
- config/te-${emulation}.h config/atof-${atof}.c)
+AC_SUBST(cpu_type)
+AC_SUBST(obj_format)
+AC_SUBST(atof)
+dnl AC_SUBST(emulation)
-case "${bfd_gas}" in
+AC_LINK_FILES($files, $links)
+
+case "${primary_bfd_gas}" in
yes) AC_DEFINE(BFD_ASSEMBLER)
need_bfd=yes ;;
esac
AC_SUBST(BFDLIB)
AC_SUBST(ALL_OBJ_DEPS)
-case "x${host}" in
- x${target}) ;;
- *) AC_DEFINE(CROSS_COMPILE);;
-esac
-
AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
-case ${host} in
- rs6000-*-*)
- # The IBM compiler mis-compiles some expressions used in gas.
- # This will tell gas to work around this lossage.
- AC_DEFINE(IBM_COMPILER_SUX) ;;
- i386-*-go32)
- # Using fopen(..., "w") for a binary file breaks under DOS.
- AC_DEFINE(WANT_FOPEN_BIN) ;;
-esac
-
AC_PROG_CC
AC_PROG_INSTALL
AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
+# Put this here so that autoconf's "cross-compiling" message doesn't confuse
+# people who are not cross-compiling but are compiling cross-assemblers.
+AC_MSG_CHECKING(whether compiling a cross-assembler)
+if test "${host}" = "${target}"; then
+ cross_gas=no
+else
+ cross_gas=yes
+ AC_DEFINE(CROSS_COMPILE)
+fi
+AC_MSG_RESULT($cross_gas)
+
dnl ansidecl.h will deal with const
dnl AC_CONST
AC_FUNC_ALLOCA
AC_C_INLINE
+# VMS doesn't have unlink.
+AC_CHECK_FUNCS(unlink remove, break)
+
# Some non-ANSI preprocessors botch requoting inside strings. That's bad
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
-AC_MSG_CHECKING([for working assert macro])
-AC_CACHE_VAL(gas_cv_assert_ok,
-AC_TRY_LINK([#include <assert.h>
-#include <stdio.h>], [
-/* check for requoting problems */
-static int a, b, c, d;
-static char *s;
-assert (!strcmp(s, "foo bar baz quux"));
-/* check for newline handling */
-assert (a == b
- || c == d);
-], gas_cv_assert_ok=yes, gas_cv_assert_ok=no))dnl
-AC_MSG_RESULT($gas_cv_assert_ok)
-test $gas_cv_assert_ok = yes || AC_DEFINE(BROKEN_ASSERT)
+GAS_WORKING_ASSERT
# On some systems, the system header files may not declare malloc, realloc,
# and free. There are places where gas needs these functions to have been
# declared -- such as when taking their addresses.
-AC_MSG_CHECKING([whether a malloc declaration is required])
-AC_CACHE_VAL(gas_cv_malloc_decl_needed,
-AC_TRY_LINK([
-#ifdef HAVE_MEMORY_H
-#include <memory.h>
-#endif
-#ifdef HAVE_STRING_H
-#include <string.h>
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-], [
-char *(*f) ();
-f = (char *(*)()) malloc;
-], gas_cv_malloc_decl_needed=no, gas_cv_malloc_decl_needed=yes))dnl
-AC_MSG_RESULT($gas_cv_malloc_decl_needed)
-test $gas_cv_malloc_decl_needed = no || AC_DEFINE(NEED_MALLOC_DECLARATION)
-
-AC_MSG_CHECKING([whether a free declaration is required])
-AC_CACHE_VAL(gas_cv_free_decl_needed,
-AC_TRY_LINK([
+gas_test_headers="
#ifdef HAVE_MEMORY_H
#include <memory.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
-], [
-int (*f) ();
-f = (int (*)()) free;
-], gas_cv_free_decl_needed=no, gas_cv_free_decl_needed=yes))
-AC_MSG_RESULT($gas_cv_free_decl_needed)
-test $gas_cv_free_decl_needed = no || AC_DEFINE(NEED_FREE_DECLARATION)
+"
+GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(free, f, int f, $gas_test_headers)
# Does errno.h declare errno, or do we have to add a separate declaration
# for it?
-AC_MSG_CHECKING([whether an errno declaration is required])
-AC_CACHE_VAL(gas_cv_errno_decl_needed,
-AC_TRY_LINK([
+GAS_CHECK_DECL_NEEDED(errno, f, int f, [
#ifdef HAVE_ERRNO_H
#include <errno.h>
#endif
-], [
-int x;
-x = errno;
-], gas_cv_errno_decl_needed=no, gas_cv_errno_decl_needed=yes))
-AC_MSG_RESULT($gas_cv_errno_decl_needed)
-test $gas_cv_errno_decl_needed = no || AC_DEFINE(NEED_ERRNO_DECLARATION)
+])
AC_CONFIG_SUBDIRS(testsuite)
dnl This must come last.
-dnl Apparently symlinks are checked for in the directory containing
-dnl the last Makefile. Thus the order used here...
-AC_OUTPUT(doc/Makefile Makefile)
+AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)
projects / deliverable / binutils-gdb.git / blobdiff