bfd/

[deliverable/binutils-gdb.git] / gas / doc / Makefile.am

diff --git a/gas/doc/Makefile.am b/gas/doc/Makefile.am
index cfb8f891c5b9cf1f56b3c207dfcdbf263ef59859..bfe4196314ae9d93edd5f038f17ec05aab1f0c7e 100644 (file)
--- a/gas/doc/Makefile.am
+++ b/gas/doc/Makefile.am
@@ -1,6 +1,6 @@
 ## Process this file with automake to generate Makefile.in
 
-AUTOMAKE_OPTIONS = cygnus
+AUTOMAKE_OPTIONS = 1.8 cygnus
 
 # What version of the manual you want; "all" includes everything
 CONFIG=all
@@ -8,43 +8,46 @@ CONFIG=all
 # Options to extract the man page from as.texinfo
 MANCONF = -Dman
 
-TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl
+TEXI2POD = perl $(BASEDIR)/etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
 
 POD2MAN = pod2man --center="GNU Development Tools" \
        --release="binutils-$(VERSION)" --section=1
 
 man_MANS = as.1
 
-# The gasp.texi file is now deprecated, as GASP has been deprecated.
-# It will disappear in a future release.
 info_TEXINFOS = as.texinfo 
 
+AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty"
+TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty"
+
 asconfig.texi: $(CONFIG).texi
        rm -f asconfig.texi
-       ln -s $(srcdir)/$(CONFIG).texi ./asconfig.texi >/dev/null 2>&1 \
-         || ln $(srcdir)/$(CONFIG).texi ./asconfig.texi >/dev/null 2>&1 \
-         || cp $(srcdir)/$(CONFIG).texi ./asconfig.texi
+       cp $(srcdir)/$(CONFIG).texi ./asconfig.texi
+       chmod u+w ./asconfig.texi
 
 CPU_DOCS = \
-       c-a29k.texi \
        c-alpha.texi \
        c-arc.texi \
        c-arm.texi \
+       c-avr.texi \
+       c-bfin.texi \
        c-d10v.texi \
        c-cris.texi \
        c-h8300.texi \
-       c-h8500.texi \
        c-hppa.texi \
        c-i370.texi \
        c-i386.texi \
        c-i860.texi \
        c-i960.texi \
+       c-ip2k.texi \
+       c-m32c.texi \
        c-m32r.texi \
        c-m68hc11.texi \
        c-m68k.texi \
-       c-m88k.texi \
        c-mips.texi \
        c-mmix.texi \
+       c-mt.texi \
+       c-msp430.texi \
        c-ns32k.texi \
        c-pdp11.texi \
        c-pj.texi \
@@ -55,36 +58,62 @@ CPU_DOCS = \
         c-tic54x.texi \
        c-vax.texi \
        c-v850.texi \
+       c-xtensa.texi \
+       c-z80.texi \
        c-z8k.texi
 
-gasver.texi: Makefile
+gasver.texi: $(srcdir)/../../bfd/configure
        rm -f $@
-       echo '@set VERSION $(VERSION)' > $@
+       eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \
+         echo "@set VERSION $$VERSION" > $@
 
-as.info: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
-as.dvi: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
+as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
 
 # We want install to imply install-info as per GNU standards, despite the
 # cygnus option.
-install: install-info
+install-data-local: install-info
+
+html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+       @$(NORMAL_INSTALL)
+       test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
+       @list='$(HTMLS)'; for p in $$list; do \
+         if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
+         f=$(html__strip_dir) \
+         if test -d "$$d$$p"; then \
+           echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
+           $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+           echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+           $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
+         else \
+           echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
+           $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
+         fi; \
+       done
 
 # This one isn't ready for prime time yet.  Not even a little bit.
 
-noinst_TEXINFOS = internals.texi gasp.texi
+noinst_TEXINFOS = internals.texi
+
+MAINTAINERCLEANFILES = asconfig.texi gasver.texi
 
-DISTCLEANFILES = asconfig.texi
+BASEDIR = $(srcdir)/../..
+BFDDIR = $(BASEDIR)/bfd
 
-MAINTAINERCLEANFILES = gasver.texi
+CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
 
 # Maintenance
 
 # We need it for the taz target in ../../Makefile.in.
-info: $(MANS)
+info-local: $(MANS)
 
 # Build the man page from the texinfo file
 # The sed command removes the no-adjust Nroff command so that
 # the man output looks standard.
-as.1: $(srcdir)/as.texinfo
+as.1: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
        touch $@
        -$(TEXI2POD) $(MANCONF) < $(srcdir)/as.texinfo > as.pod
        -($(POD2MAN) as.pod | \
@@ -92,3 +121,12 @@ as.1: $(srcdir)/as.texinfo
                mv -f $@.T$$$$ $@) || \
                (rm -f $@.T$$$$ && exit 1)
        rm -f as.pod
+
+MAINTAINERCLEANFILES += as.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES = as.info
+endif