\input texinfo @c -*-Texinfo-*-
@c Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-@c 2001, 2002, 2003, 2004, 2005
+@c 2001, 2002, 2003, 2004, 2005, 2006
@c Free Software Foundation, Inc.
@c UPDATE!! On future updates--
@c (1) check for new machine-dep cmdline options in
@ifset H8/300
@set H8
@end ifset
-@ifset H8/500
-@set H8
-@end ifset
@ifset SH
@set H8
@end ifset
This file documents the GNU Assembler "@value{AS}".
@c man begin COPYRIGHT
-Copyright (C) 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001, 2002 Free Software Foundation, Inc.
+Copyright (C) 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001, 2002, 2006 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1
@end tex
@vskip 0pt plus 1filll
-Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001, 2002 Free Software Foundation, Inc.
+Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001, 2002, 2006 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1
* Reporting Bugs:: Reporting Bugs
* Acknowledgements:: Who Did What
* GNU Free Documentation License:: GNU Free Documentation License
-* Index:: Index
+* AS Index:: AS Index
@end menu
@end ifnottex
[@b{--listing-cont-lines}=@var{NUM}] [@b{--keep-locals}] [@b{-o}
@var{objfile}] [@b{-R}] [@b{--reduce-memory-overheads}] [@b{--statistics}]
[@b{-v}] [@b{-version}] [@b{--version}] [@b{-W}] [@b{--warn}]
- [@b{--fatal-warnings}] [@b{-w}] [@b{-x}] [@b{-Z}] [@b{--target-help}]
- [@var{target-options}] [@b{--}|@var{files} @dots{}]
+ [@b{--fatal-warnings}] [@b{-w}] [@b{-x}] [@b{-Z}] [@b{@@@var{FILE}}]
+ [@b{--target-help}] [@var{target-options}]
+ [@b{--}|@var{files} @dots{}]
@c
@c Target dependent options are listed below. Keep the list sorted.
@c Add an empty line for separation.
-@ifset A29K
-@c am29k has no machine-dependent assembler options
-@end ifset
@ifset ALPHA
@emph{Target Alpha options:}
[@b{-trap}] [@b{-no-break}] [@b{-break}] [@b{-no-trap}]
[@b{-mfix7000}] [@b{-mno-fix7000}]
[@b{-mips16}] [@b{-no-mips16}]
+ [@b{-msmartmips}] [@b{-mno-smartmips}]
[@b{-mips3d}] [@b{-no-mips3d}]
[@b{-mdmx}] [@b{-no-mdmx}]
+ [@b{-mdsp}] [@b{-mno-dsp}]
+ [@b{-mmt}] [@b{-mno-mt}]
[@b{-mdebug}] [@b{-no-mdebug}]
[@b{-mpdr}] [@b{-mno-pdr}]
@end ifset
[@b{-mcpu=54[123589]}|@b{-mcpu=54[56]lp}] [@b{-mfar-mode}|@b{-mf}]
[@b{-merrors-to-file} @var{<filename>}|@b{-me} @var{<filename>}]
@end ifset
+
+@ifset Z80
+
+@emph{Target Z80 options:}
+ [@b{-z80}] [@b{-r800}]
+ [@b{ -ignore-undocumented-instructions}] [@b{-Wnud}]
+ [@b{ -ignore-unportable-instructions}] [@b{-Wnup}]
+ [@b{ -warn-undocumented-instructions}] [@b{-Wud}]
+ [@b{ -warn-unportable-instructions}] [@b{-Wup}]
+ [@b{ -forbid-undocumented-instructions}] [@b{-Fud}]
+ [@b{ -forbid-unportable-instructions}] [@b{-Fup}]
+@end ifset
+
@ifset Z8000
@c Z8000 has no machine-dependent assembler options
@end ifset
@c man begin OPTIONS
@table @gcctabopt
+@include at-file.texi
+
@item -a[cdhlmns]
Turn on listings, in any of a variety of ways:
@code{.set mips16} at the start of the assembly file. @samp{-no-mips16}
turns off this option.
+@item -msmartmips
+@itemx -mno-smartmips
+Enables the SmartMIPS extension to the MIPS32 instruction set. This is
+equivalent to putting @code{.set smartmips} at the start of the assembly file.
+@samp{-mno-smartmips} turns off this option.
+
@item -mips3d
@itemx -no-mips3d
Generate code for the MIPS-3D Application Specific Extension.
This tells the assembler to accept MDMX instructions.
@samp{-no-mdmx} turns off this option.
+@item -mdsp
+@itemx -mno-dsp
+Generate code for the DSP Application Specific Extension.
+This tells the assembler to accept DSP instructions.
+@samp{-mno-dsp} turns off this option.
+
+@item -mmt
+@itemx -mno-mt
+Generate code for the MT Application Specific Extension.
+This tells the assembler to accept MT instructions.
+@samp{-mno-mt} turns off this option.
+
@item --construct-floats
@itemx --no-construct-floats
The @samp{--no-construct-floats} option disables the construction of
@end table
@end ifset
+@ifset Z80
+The following options are available when @value{AS} is configured for
+a Z80 family processor.
+@table @gcctabopt
+@item -z80
+Assemble for Z80 processor.
+@item -r800
+Assemble for R800 processor.
+@item -ignore-undocumented-instructions
+@itemx -Wnud
+Assemble undocumented Z80 instructions that also work on R800 without warning.
+@item -ignore-unportable-instructions
+@itemx -Wnup
+Assemble all undocumented Z80 instructions without warning.
+@item -warn-undocumented-instructions
+@itemx -Wud
+Issue a warning for undocumented Z80 instructions that also work on R800.
+@item -warn-unportable-instructions
+@itemx -Wup
+Issue a warning for undocumented Z80 instructions that do notwork on R800.
+@item -forbid-undocumented-instructions
+@itemx -Fud
+Treat all undocumented instructions as errors.
+@item -forbid-unportable-instructions
+@itemx -Fup
+Treat undocumented Z80 intructions that do notwork on R800 as errors.
+@end table
+@end ifset
+
@c man end
@menu
Series Programming Manual}. For the H8/300H, see @cite{H8/300H Series
Programming Manual} (Renesas).
@end ifset
-@ifset H8/500
-For information on the H8/500 machine instruction set, see @cite{H8/500
-Series Programming Manual} (Renesas M21T001).
-@end ifset
@ifset SH
For information on the Renesas (formerly Hitachi) / SuperH SH machine instruction set,
see @cite{SH-Microcomputer User's Manual} (Renesas) or
@value{OBJ-NAME} format object files.
@end ifclear
@c The following should exhaust all configs that set MULTI-OBJ, ideally
-@ifset A29K
-On the @value{TARGET}, @command{@value{AS}} can be configured to produce either
-@code{a.out} or COFF format object files.
-@end ifset
@ifset I960
On the @value{TARGET}, @command{@value{AS}} can be configured to produce either
@code{b.out} or COFF format object files.
@ifset GENERIC
(@pxref{Line,,@code{.line}})
@end ifset
-@ifclear GENERIC
-@ifclear A29K
-(@pxref{Line,,@code{.line}})
-@end ifclear
-@ifset A29K
-(@pxref{Ln,,@code{.ln}})
-@end ifset
-@end ifclear
then it is used to calculate the number printed,
otherwise the actual line in the current source file is printed. The
message text is intended to be self explanatory (in the grand Unix
@cindex line comment character
Anything from the @dfn{line comment} character to the next newline
is considered a comment and is ignored. The line comment character is
-@ifset A29K
-@samp{;} for the AMD 29K family;
-@end ifset
@ifset ARC
@samp{;} on the ARC;
@end ifset
@ifset H8/300
@samp{;} for the H8/300 family;
@end ifset
-@ifset H8/500
-@samp{!} for the H8/500 family;
-@end ifset
@ifset HPPA
@samp{;} for the HPPA;
@end ifset
@ifset M68HC11
@samp{#} on the 68HC11 and 68HC12;
@end ifset
-@ifset M880X0
-@samp{;} on the M880x0;
-@end ifset
@ifset VAX
@samp{#} on the Vax;
@end ifset
+@ifset Z80
+@samp{;} for the Z80;
+@end ifset
@ifset Z8000
@samp{!} for the Z8000;
@end ifset
constants are an exception: they do not end statements.
@end ifclear
@ifset abnormal-separator
-@ifset A29K
-A @dfn{statement} ends at a newline character (@samp{\n}) or an ``at''
-sign (@samp{@@}). The newline or at sign is considered part of the
-preceding statement. Newlines and at signs within character constants
-are an exception: they do not end statements.
-@end ifset
@ifset HPPA
A @dfn{statement} ends at a newline character (@samp{\n}) or an exclamation
point (@samp{!}). The newline or exclamation point is considered part of the
@end ifset
@ifset H8
A @dfn{statement} ends at a newline character (@samp{\n}); or (for the
-H8/300) a dollar sign (@samp{$}); or (for the
-Renesas-SH or the
-H8/500) a semicolon
+H8/300) a dollar sign (@samp{$}); or (for the Renesas-SH) a semicolon
(@samp{;}). The newline or separator character is considered part of
the preceding statement. Newlines and separators within character
constants are an exception: they do not end statements.
(or semicolon @samp{;})
@end ifclear
@ifset abnormal-separator
-@ifset A29K
-(or at sign @samp{@@})
-@end ifset
@ifset H8
(or dollar sign @samp{$}, for the H8/300; or semicolon @samp{;} for the
-Renesas SH or H8/500)
+Renesas SH)
@end ifset
@end ifset
@end ifclear
4.2 assembler seems to allow any of @samp{defghDEFGH}.)
@end ignore
-On the H8/300, H8/500,
-Renesas / SuperH SH,
+On the H8/300, Renesas / SuperH SH,
and AMD 29K architectures, the letter must be
one of the letters @samp{DFPRSX} (in upper or lower case).
On the HPPA architecture, the letter must be @samp{E} (upper case only).
@end ifset
@ifclear GENERIC
-@ifset A29K
-One of the letters @samp{DFPRSX} (in upper or lower case).
-@end ifset
@ifset ARC
One of the letters @samp{DFRS} (in upper or lower case).
@end ifset
the task of adjusting mentions of object-file addresses so they refer to
the proper run-time addresses.
@ifset H8
-For the H8/300 and H8/500,
-and for the Renesas / SuperH SH,
+For the H8/300, and for the Renesas / SuperH SH,
@command{@value{AS}} pads sections if needed to
ensure they end on a word (sixteen bit) boundary.
@end ifset
@end ifset
@ifclear GENERIC
@ifset H8
-On the H8/300 and H8/500 platforms, each subsection is zero-padded to a word
+On the H8/300 platform, each subsection is zero-padded to a word
boundary (two bytes).
The same is true on the Renesas SH.
@end ifset
@c these paragraphs might need to vanish from this manual, and be
@c discussed in BFD chapter of binutils (or some such).
@end ifset
-@ifset A29K
-On the AMD 29K family, no particular padding is added to section or
-subsection sizes; @value{AS} forces no alignment on this platform.
-@end ifset
@end ifclear
Subsections appear in your object file in numeric order, lowest numbered
A symbol can be given an arbitrary value by writing a symbol, followed
by an equals sign @samp{=}, followed by an expression
(@pxref{Expressions}). This is equivalent to using the @code{.set}
-directive. @xref{Set,,@code{.set}}.
+directive. @xref{Set,,@code{.set}}. In the same way, using a double
+equals sign @samp{=}@samp{=} here represents an equivalent of the
+@code{.eqv} directive. @xref{Eqv,,@code{.eqv}}.
@node Symbol Names
@section Symbol Names
string of digits, letters, dollar signs (unless otherwise noted in
@ref{Machine Dependencies}), and underscores.
@end ifclear
-@ifset A29K
-For the AMD 29K family, @samp{?} is also allowed in the
-body of a symbol name, though not at its beginning.
-@end ifset
-
@ifset SPECIAL-SYMS
@ifset H8
Symbol names begin with a letter or with one of @samp{._}. On the
-Renesas SH or the H8/500, you can also use @code{$} in symbol names. That
+Renesas SH you can also use @code{$} in symbol names. That
character may be followed by any string of digits, letters, dollar signs (save
on the H8/300), and underscores.
@end ifset
@ifclear no-space-dir
@samp{.space 4}.
@end ifclear
-@ifset no-space-dir
-@ifset A29K
-@samp{.block 4}.
-@end ifset
-@end ifset
@node Symbol Attributes
@section Symbol Attributes
@item %
@dfn{Remainder}.
-@item <
-@itemx <<
+@item <<
@dfn{Shift Left}. Same as the C operator @samp{<<}.
-@item >
-@itemx >>
+@item >>
@dfn{Shift Right}. Same as the C operator @samp{>>}.
@end table
@item ==
@dfn{Is Equal To}
@item <>
+@itemx !=
@dfn{Is Not Equal To}
@item <
@dfn{Is Less Than}
-@itemx >
+@item >
@dfn{Is Greater Than}
-@itemx >=
+@item >=
@dfn{Is Greater Than Or Equal To}
-@itemx <=
+@item <=
@dfn{Is Less Than Or Equal To}
The comparison operators can be used as infix operators. A true results has a
@menu
* Abort:: @code{.abort}
@ifset COFF
-* ABORT:: @code{.ABORT}
+* ABORT (COFF):: @code{.ABORT}
@end ifset
* Align:: @code{.align @var{abs-expr} , @var{abs-expr}}
* Endif:: @code{.endif}
* Equ:: @code{.equ @var{symbol}, @var{expression}}
* Equiv:: @code{.equiv @var{symbol}, @var{expression}}
+* Eqv:: @code{.eqv @var{symbol}, @var{expression}}
* Err:: @code{.err}
* Error:: @code{.error @var{string}}
* Exitm:: @code{.exitm}
* Line:: @code{.line @var{line-number}}
@end ifclear
-* Ln:: @code{.ln @var{line-number}}
* Linkonce:: @code{.linkonce [@var{type}]}
* List:: @code{.list}
+* Ln:: @code{.ln @var{line-number}}
+
+* LNS directives:: @code{.file}, @code{.loc}, etc.
+
* Long:: @code{.long @var{expressions}}
@ignore
* Lsym:: @code{.lsym @var{symbol}, @var{expression}}
* Warning:: @code{.warning @var{string}}
* Weak:: @code{.weak @var{names}}
+* Weakref:: @code{.weakref @var{alias}, @var{symbol}}
* Word:: @code{.word @var{expressions}}
* Deprecated:: Deprecated Directives
@end menu
quit also. One day @code{.abort} will not be supported.
@ifset COFF
-@node ABORT
-@section @code{.ABORT}
+@node ABORT (COFF)
+@section @code{.ABORT} (COFF)
@cindex @code{ABORT} directive
When producing COFF output, @command{@value{AS}} accepts this directive as a
with no-op instructions when appropriate.
The way the required alignment is specified varies from system to system.
-For the a29k, arc, hppa, i386 using ELF, i860, iq2000, m68k, m88k, or32,
+For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or32,
s390, sparc, tic4x, tic80 and xtensa, the first expression is the
alignment request in bytes. For example @samp{.align 8} advances
the location counter until it is a multiple of 8. If the location counter
This is often easier to use, because the number will match the
code it's annotating.
+@section @code{.cfi_signal_frame}
+Mark current function as signal trampoline.
+
@section @code{.cfi_window_save}
SPARC register window has been saved.
might use this to add OS-specific CFI opcodes, or generic CFI
opcodes that GAS does not yet support.
+@node LNS directives
+@section @code{.file @var{fileno} @var{filename}}
+@cindex @code{file} directive
+When emitting dwarf2 line number information @code{.file} assigns filenames
+to the @code{.debug_line} file name table. The @var{fileno} operand should
+be a unique positive integer to use as the index of the entry in the table.
+The @var{filename} operand is a C string literal.
+
+The detail of filename indicies is exposed to the user because the filename
+table is shared with the @code{.debug_info} section of the dwarf2 debugging
+information, and thus the user must know the exact indicies that table
+entries will have.
+
+@section @code{.loc @var{fileno} @var{lineno} [@var{column}] [@var{options}]}
+@cindex @code{loc} directive
+The @code{.loc} directive will add row to the @code{.debug_line} line
+number matrix corresponding to the immediately following assembly
+instruction. The @var{fileno}, @var{lineno}, and optional @var{column}
+arguments will be applied to the @code{.debug_line} state machine before
+the row is added.
+
+The @var{options} are a sequence of the following tokens in any order:
+
+@table @code
+@item basic_block
+This option will set the @code{basic_block} register in the
+@code{.debug_line} state machine to @code{true}.
+
+@item prologue_end
+This option will set the @code{prologue_end} register in the
+@code{.debug_line} state machine to @code{true}.
+
+@item epilogue_begin
+This option will set the @code{epilogue_begin} register in the
+@code{.debug_line} state machine to @code{true}.
+
+@item is_stmt @var{value}
+This option will set the @code{is_stmt} register in the
+@code{.debug_line} state machine to @code{value}, which must be
+either 0 or 1.
+
+@item isa @var{value}
+This directive will set the @code{isa} register in the @code{.debug_line}
+state machine to @var{value}, which must be an unsigned integer.
+
+@end table
+
+@section @code{.loc_mark_blocks @var{enable}}
+@cindex @code{loc_mark_blocks} directive
+The @code{.loc_mark_blocks} directive makes the assembler emit an entry
+to the @code{.debug_line} line number matrix with the @code{basic_block}
+register in the state machine set whenever a code label is seen.
+The @var{enable} argument should be either 1 or 0, to enable or disable
+this function respectively.
+
@node Data
@section @code{.data @var{subsection}}
@samp{@var{symbol} .equ @var{expression}}.
@end ifset
+@ifset Z80
+The syntax for @code{equ} on the Z80 is
+@samp{@var{symbol} equ @var{expression}}.
+On the Z80 it is an eror if @var{symbol} is already defined,
+but the symbol is not protected from later redefinition,
+compare @xref{Equiv}.
+@end ifset
+
@node Equiv
@section @code{.equiv @var{symbol}, @var{expression}}
@cindex @code{equiv} directive
.endif
.equ SYM,VAL
@end smallexample
+plus it protects the symbol from later redefinition.
+
+@node Eqv
+@section @code{.eqv @var{symbol}, @var{expression}}
+@cindex @code{eqv} directive
+The @code{.eqv} directive is like @code{.equiv}, but no attempt is made to
+evaluate the expression or any part of it immediately. Instead each time
+the resulting symbol is used in an expression, a snapshot of its current
+value is taken.
@node Err
@section @code{.err}
@cindex @code{err} directive
If @command{@value{AS}} assembles a @code{.err} directive, it will print an error
message and, unless the @option{-Z} option was used, it will not generate an
-object file. This can be used to signal error an conditionally compiled code.
+object file. This can be used to signal an error in conditionally compiled code.
@node Error
@section @code{.error "@var{string}"}
to specify an empty file name, you must give the quotes--@code{""}. This
statement may go away in future: it is only recognized to be compatible with
old @command{@value{AS}} programs.
-@ifset A29K
-In some configurations of @command{@value{AS}}, @code{.file} has already been
-removed to avoid conflicts with other assemblers. @xref{Machine Dependencies}.
-@end ifset
@end ifclear
@node Fill
@section @code{.ident}
@cindex @code{ident} directive
-This directive is used by some assemblers to place tags in object files.
-@command{@value{AS}} simply accepts the directive for source-file
-compatibility with such assemblers, but does not actually emit anything
-for it.
+
+This directive is used by some assemblers to place tags in object files. The
+behavior of this directive varies depending on the target. When using the
+a.out object file format, @command{@value{AS}} simply accepts the directive for
+source-file compatibility with existing assemblers, but does not emit anything
+for it. When using COFF, comments are emitted to the @code{.comment} or
+@code{.rdata} section, depending on the target. When using ELF, comments are
+emitted to the @code{.comment} section.
@node If
@section @code{.if @var{absolute expression}}
@ifclear GENERIC
@ifset H8
-On the H8/500 and most forms of the H8/300, @code{.int} emits 16-bit
+On most forms of the H8/300, @code{.int} emits 16-bit
integers. On the H8/300H and the Renesas SH, however, @code{.int} emits
32-bit integers.
@end ifset
@command{@value{AS}} will no longer support this directive: it is recognized only
for compatibility with existing assembler programs.
-@ifset GENERIC
-@ifset A29K
-@emph{Warning:} In the AMD29K configuration of @value{AS}, this command is
-not available; use the synonym @code{.ln} in that context.
-@end ifset
-@end ifset
@end ifset
@ifclear no-line-dir
For ELF targets, the @code{.section} directive is used like this:
@smallexample
-.section @var{name} [, "@var{flags}"[, @@@var{type}[,@var{flag_specific_arguments}]]
+.section @var{name} [, "@var{flags}"[, @@@var{type}[,@var{flag_specific_arguments}]]]
@end smallexample
The optional @var{flags} argument is a quoted string which may contain any
@samp{@var{symbol} .set @var{expression}}.
@end ifset
+@ifset Z80
+On Z80 @code{set} is a real instruction, use
+@samp{@var{symbol} defl @var{expression}} instead.
+@end ifset
+
@node Short
@section @code{.short @var{expressions}}
@end ifset
@end ifclear
-@ifset A29K
-@ifclear GENERIC
-@node Space
-@section @code{.space}
-@cindex @code{space} directive
-@end ifclear
-On the AMD 29K, this directive is ignored; it is accepted for
-compatibility with other AMD 29K assemblers.
-
-@quotation
-@emph{Warning:} In most versions of the @sc{gnu} assembler, the directive
-@code{.space} has the effect of @code{.block} @xref{Machine Dependencies}.
-@end quotation
-@end ifset
-
@ifset have-stabs
@node Stab
@section @code{.stabd, .stabn, .stabs}
This sets the type of symbol @var{name} to be either a
function symbol or an object symbol. There are five different syntaxes
supported for the @var{type description} field, in order to provide
-compatibility with various other assemblers. The syntaxes supported are:
+compatibility with various other assemblers.
+
+Because some of the characters used in these syntaxes (such as @samp{@@} and
+@samp{#}) are comment characters for some architectures, some of the syntaxes
+below do not work on all architectures. The first variant will be accepted by
+the GNU assembler on all architectures so that variant should be used for
+maximum portability, if you do not need to assemble your code with other
+assemblers.
+
+The syntaxes supported are:
@smallexample
+ .type <name> STT_FUNCTION
+ .type <name> STT_OBJECT
+
.type <name>,#function
.type <name>,#object
.type <name>,"function"
.type <name>,"object"
-
- .type <name> STT_FUNCTION
- .type <name> STT_OBJECT
@end smallexample
@end ifset
@end ifset
When a weak symbol is created that is not an alias, GAS creates an
alternate symbol to hold the default value.
+@node Weakref
+@section @code{.weakref @var{alias}, @var{target}}
+
+@cindex @code{weakref} directive
+This directive creates an alias to the target symbol that enables the symbol to
+be referenced with weak-symbol semantics, but without actually making it weak.
+If direct references or definitions of the symbol are present, then the symbol
+will not be weak, but if all references to it are through weak references, the
+symbol will be marked as weak in the symbol table.
+
+The effect is equivalent to moving all references to the alias to a separate
+assembly source file, renaming the alias to the symbol in it, declaring the
+symbol as weak there, and running a reloadable link to merge the object files
+resulting from the assembly of the new source file and the old source file that
+had the references to the alias removed.
+
+The alias itself never makes to the symbol table, and is entirely handled
+within the assembler.
+
@node Word
@section @code{.word @var{expressions}}
subject, see the hardware manufacturer's manual.
@menu
-@ifset A29K
-* AMD29K-Dependent:: AMD 29K Dependent Features
-@end ifset
@ifset ALPHA
* Alpha-Dependent:: Alpha Dependent Features
@end ifset
@ifset ARM
* ARM-Dependent:: ARM Dependent Features
@end ifset
+@ifset BFIN
+* BFIN-Dependent:: BFIN Dependent Features
+@end ifset
@ifset CRIS
* CRIS-Dependent:: CRIS Dependent Features
@end ifset
@ifset H8/300
* H8/300-Dependent:: Renesas H8/300 Dependent Features
@end ifset
-@ifset H8/500
-* H8/500-Dependent:: Renesas H8/500 Dependent Features
-@end ifset
@ifset HPPA
* HPPA-Dependent:: HPPA Dependent Features
@end ifset
@ifset M68HC11
* M68HC11-Dependent:: M68HC11 and 68HC12 Dependent Features
@end ifset
-@ifset M880X0
-* M88K-Dependent:: M880x0 Dependent Features
-@end ifset
@ifset MIPS
* MIPS-Dependent:: MIPS Dependent Features
@end ifset
@ifset XTENSA
* Xtensa-Dependent:: Xtensa Dependent Features
@end ifset
+@ifset Z80
+* Z80-Dependent:: Z80 Dependent Features
+@end ifset
@ifset Z8000
* Z8000-Dependent:: Z8000 Dependent Features
@end ifset
@c node and sectioning commands; hence the repetition of @chapter BLAH
@c in both conditional blocks.
-@ifset A29K
-@include c-a29k.texi
-@end ifset
-
@ifset ALPHA
@include c-alpha.texi
@end ifset
@include c-arm.texi
@end ifset
+@ifset BFIN
+@include c-bfin.texi
+@end ifset
+
@ifset CRIS
@include c-cris.texi
@end ifset
@menu
* H8/300-Dependent:: Renesas H8/300 Dependent Features
-* H8/500-Dependent:: Renesas H8/500 Dependent Features
* SH-Dependent:: Renesas SH Dependent Features
@end menu
@lowersections
@include c-h8300.texi
@end ifset
-@ifset H8/500
-@include c-h8500.texi
-@end ifset
-
@ifset HPPA
@include c-hppa.texi
@end ifset
@include c-m68hc11.texi
@end ifset
-@ifset M880X0
-@include c-m88k.texi
-@end ifset
-
@ifset MIPS
@include c-mips.texi
@end ifset
@include c-tic54x.texi
@end ifset
+@ifset Z80
+@include c-z80.texi
+@end ifset
+
@ifset Z8000
@include c-z8k.texi
@end ifset
(which hasn't been merged in yet). Ralph Campbell worked with the MIPS code to
support a.out format.
-Support for the Zilog Z8k and Renesas H8/300 and H8/500 processors (tc-z8k,
-tc-h8300, tc-h8500), and IEEE 695 object file format (obj-ieee), was written by
+Support for the Zilog Z8k and Renesas H8/300 processors (tc-z8k,
+tc-h8300), and IEEE 695 object file format (obj-ieee), was written by
Steve Chamberlain of Cygnus Support. Steve also modified the COFF back end to
use BFD for some low-level operations, for use with the H8/300 and AMD 29k
targets.
@include fdl.texi
-@node Index
-@unnumbered Index
+@node AS Index
+@unnumbered AS Index
@printindex cp