\input texinfo @c -*-Texinfo-*-
-@c Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-@c 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
-@c Free Software Foundation, Inc.
+@c Copyright (C) 1991-2015 Free Software Foundation, Inc.
@c UPDATE!! On future updates--
@c (1) check for new machine-dep cmdline options in
@c md_parse_option definitions in config/tc-*.c
This file documents the GNU Assembler "@value{AS}".
@c man begin COPYRIGHT
-Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2015 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@end tex
@vskip 0pt plus 1filll
-Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2015 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
[@b{--compress-debug-sections}] [@b{--nocompress-debug-sections}]
[@b{--debug-prefix-map} @var{old}=@var{new}]
[@b{--defsym} @var{sym}=@var{val}] [@b{-f}] [@b{-g}] [@b{--gstabs}]
- [@b{--gstabs+}] [@b{--gdwarf-2}] [@b{--help}] [@b{-I} @var{dir}] [@b{-J}]
+ [@b{--gstabs+}] [@b{--gdwarf-2}] [@b{--gdwarf-sections}]
+ [@b{--help}] [@b{-I} @var{dir}] [@b{-J}]
[@b{-K}] [@b{-L}] [@b{--listing-lhs-width}=@var{NUM}]
[@b{--listing-lhs-width2}=@var{NUM}] [@b{--listing-rhs-width}=@var{NUM}]
[@b{--listing-cont-lines}=@var{NUM}] [@b{--keep-locals}] [@b{-o}
@var{objfile}] [@b{-R}] [@b{--reduce-memory-overheads}] [@b{--statistics}]
[@b{-v}] [@b{-version}] [@b{--version}] [@b{-W}] [@b{--warn}]
[@b{--fatal-warnings}] [@b{-w}] [@b{-x}] [@b{-Z}] [@b{@@@var{FILE}}]
+ [@b{--size-check=[error|warning]}]
[@b{--target-help}] [@var{target-options}]
[@b{--}|@var{files} @dots{}]
@c
@c Target dependent options are listed below. Keep the list sorted.
@c Add an empty line for separation.
+@ifset AARCH64
+
+@emph{Target AArch64 options:}
+ [@b{-EB}|@b{-EL}]
+ [@b{-mabi}=@var{ABI}]
+@end ifset
@ifset ALPHA
@emph{Target Alpha options:}
@emph{Target D30V options:}
[@b{-O}|@b{-n}|@b{-N}]
@end ifset
+@ifset EPIPHANY
+
+@emph{Target EPIPHANY options:}
+ [@b{-mepiphany}|@b{-mepiphany16}]
+@end ifset
@ifset H8
@emph{Target H8/300 options:}
@ifset I80386
@emph{Target i386 options:}
- [@b{--32}|@b{--64}] [@b{-n}]
+ [@b{--32}|@b{--x32}|@b{--64}] [@b{-n}]
[@b{-march}=@var{CPU}[+@var{EXTENSION}@dots{}]] [@b{-mtune}=@var{CPU}]
@end ifset
@ifset I960
@ifset M68HC11
@emph{Target M68HC11 options:}
- [@b{-m68hc11}|@b{-m68hc12}|@b{-m68hcs12}]
+ [@b{-m68hc11}|@b{-m68hc12}|@b{-m68hcs12}|@b{-mm9s12x}|@b{-mm9s12xg}]
[@b{-mshort}|@b{-mlong}]
[@b{-mshort-double}|@b{-mlong-double}]
[@b{--force-long-branches}] [@b{--short-branches}]
[@b{-jsri2bsr}] [@b{-sifilter}] [@b{-relax}]
[@b{-mcpu=[210|340]}]
@end ifset
+@ifset METAG
+
+@emph{Target Meta options:}
+ [@b{-mcpu=@var{cpu}}] [@b{-mfpu=@var{cpu}}] [@b{-mdsp=@var{cpu}}]
+@end ifset
@ifset MICROBLAZE
@emph{Target MICROBLAZE options:}
@c MicroBlaze has no machine-dependent assembler options.
[@b{-g}[@var{debug level}]] [@b{-G} @var{num}] [@b{-KPIC}] [@b{-call_shared}]
[@b{-non_shared}] [@b{-xgot} [@b{-mvxworks-pic}]
[@b{-mabi}=@var{ABI}] [@b{-32}] [@b{-n32}] [@b{-64}] [@b{-mfp32}] [@b{-mgp32}]
+ [@b{-mfp64}] [@b{-mgp64}] [@b{-mfpxx}]
+ [@b{-modd-spreg}] [@b{-mno-odd-spreg}]
[@b{-march}=@var{CPU}] [@b{-mtune}=@var{CPU}] [@b{-mips1}] [@b{-mips2}]
[@b{-mips3}] [@b{-mips4}] [@b{-mips5}] [@b{-mips32}] [@b{-mips32r2}]
- [@b{-mips64}] [@b{-mips64r2}]
+ [@b{-mips32r3}] [@b{-mips32r5}] [@b{-mips32r6}] [@b{-mips64}] [@b{-mips64r2}]
+ [@b{-mips64r3}] [@b{-mips64r5}] [@b{-mips64r6}]
[@b{-construct-floats}] [@b{-no-construct-floats}]
+ [@b{-mnan=@var{encoding}}]
[@b{-trap}] [@b{-no-break}] [@b{-break}] [@b{-no-trap}]
[@b{-mips16}] [@b{-no-mips16}]
+ [@b{-mmicromips}] [@b{-mno-micromips}]
[@b{-msmartmips}] [@b{-mno-smartmips}]
[@b{-mips3d}] [@b{-no-mips3d}]
[@b{-mdmx}] [@b{-no-mdmx}]
[@b{-mdsp}] [@b{-mno-dsp}]
[@b{-mdspr2}] [@b{-mno-dspr2}]
+ [@b{-mmsa}] [@b{-mno-msa}]
+ [@b{-mxpa}] [@b{-mno-xpa}]
[@b{-mmt}] [@b{-mno-mt}]
+ [@b{-mmcu}] [@b{-mno-mcu}]
+ [@b{-minsn32}] [@b{-mno-insn32}]
[@b{-mfix7000}] [@b{-mno-fix7000}]
+ [@b{-mfix-rm7000}] [@b{-mno-fix-rm7000}]
[@b{-mfix-vr4120}] [@b{-mno-fix-vr4120}]
[@b{-mfix-vr4130}] [@b{-mno-fix-vr4130}]
[@b{-mdebug}] [@b{-no-mdebug}]
[@b{--no-expand}] [@b{--no-merge-gregs}] [@b{-x}]
[@b{--linker-allocated-gregs}]
@end ifset
+@ifset NIOSII
+
+@emph{Target Nios II options:}
+ [@b{-relax-all}] [@b{-relax-section}] [@b{-no-relax}]
+ [@b{-EB}] [@b{-EL}]
+@end ifset
+@ifset NDS32
+
+@emph{Target NDS32 options:}
+ [@b{-EL}] [@b{-EB}] [@b{-O}] [@b{-Os}] [@b{-mcpu=@var{cpu}}]
+ [@b{-misa=@var{isa}}] [@b{-mabi=@var{abi}}] [@b{-mall-ext}]
+ [@b{-m[no-]16-bit}] [@b{-m[no-]perf-ext}] [@b{-m[no-]perf2-ext}]
+ [@b{-m[no-]string-ext}] [@b{-m[no-]dsp-ext}] [@b{-m[no-]mac}] [@b{-m[no-]div}]
+ [@b{-m[no-]audio-isa-ext}] [@b{-m[no-]fpu-sp-ext}] [@b{-m[no-]fpu-dp-ext}]
+ [@b{-m[no-]fpu-fma}] [@b{-mfpu-freg=@var{FREG}}] [@b{-mreduced-regs}]
+ [@b{-mfull-regs}] [@b{-m[no-]dx-regs}] [@b{-mpic}] [@b{-mno-relax}]
+ [@b{-mb2bb}]
+@end ifset
@ifset PDP11
@emph{Target PDP11 options:}
@ifset PPC
@emph{Target PowerPC options:}
- [@b{-mpwrx}|@b{-mpwr2}|@b{-mpwr}|@b{-m601}|@b{-mppc}|@b{-mppc32}|@b{-m603}|@b{-m604}|
- @b{-m403}|@b{-m405}|@b{-mppc64}|@b{-m620}|@b{-mppc64bridge}|@b{-mbooke}]
- [@b{-mcom}|@b{-many}|@b{-maltivec}|@b{-mvsx}] [@b{-memb}]
+ [@b{-a32}|@b{-a64}]
+ [@b{-mpwrx}|@b{-mpwr2}|@b{-mpwr}|@b{-m601}|@b{-mppc}|@b{-mppc32}|@b{-m603}|@b{-m604}|@b{-m403}|@b{-m405}|
+ @b{-m440}|@b{-m464}|@b{-m476}|@b{-m7400}|@b{-m7410}|@b{-m7450}|@b{-m7455}|@b{-m750cl}|@b{-mppc64}|
+ @b{-m620}|@b{-me500}|@b{-e500x2}|@b{-me500mc}|@b{-me500mc64}|@b{-me5500}|@b{-me6500}|@b{-mppc64bridge}|
+ @b{-mbooke}|@b{-mpower4}|@b{-mpwr4}|@b{-mpower5}|@b{-mpwr5}|@b{-mpwr5x}|@b{-mpower6}|@b{-mpwr6}|
+ @b{-mpower7}|@b{-mpwr7}|@b{-mpower8}|@b{-mpwr8}|@b{-ma2}|@b{-mcell}|@b{-mspe}|@b{-mtitan}|@b{-me300}|@b{-mcom}]
+ [@b{-many}] [@b{-maltivec}|@b{-mvsx}|@b{-mhtm}|@b{-mvle}]
[@b{-mregnames}|@b{-mno-regnames}]
- [@b{-mrelocatable}|@b{-mrelocatable-lib}]
- [@b{-mlittle}|@b{-mlittle-endian}|@b{-mbig}|@b{-mbig-endian}]
+ [@b{-mrelocatable}|@b{-mrelocatable-lib}|@b{-K PIC}] [@b{-memb}]
+ [@b{-mlittle}|@b{-mlittle-endian}|@b{-le}|@b{-mbig}|@b{-mbig-endian}|@b{-be}]
[@b{-msolaris}|@b{-mno-solaris}]
+ [@b{-nops=@var{count}}]
+@end ifset
+@ifset RL78
+
+@emph{Target RL78 options:}
+ [@b{-mg10}]
+ [@b{-m32bit-doubles}|@b{-m64bit-doubles}]
@end ifset
@ifset RX
@emph{Target RX options:}
[@b{-mlittle-endian}|@b{-mbig-endian}]
- [@b{-m32bit-ints}|@b{-m16bit-ints}]
[@b{-m32bit-doubles}|@b{-m64bit-doubles}]
+ [@b{-muse-conventional-section-names}]
+ [@b{-msmall-data-limit}]
+ [@b{-mpid}]
+ [@b{-mrelax}]
+ [@b{-mint-register=@var{number}}]
+ [@b{-mgcc-abi}|@b{-mrx-abi}]
@end ifset
@ifset S390
[@b{-mcpu=54[123589]}|@b{-mcpu=54[56]lp}] [@b{-mfar-mode}|@b{-mf}]
[@b{-merrors-to-file} @var{<filename>}|@b{-me} @var{<filename>}]
@end ifset
-
@ifset TIC6X
@emph{Target TIC6X options:}
- [@b{-march=@var{arch}}] [@b{-matomic}|@b{-mno-atomic}]
- [@b{-mbig-endian}|@b{-mlittle-endian}]
+ [@b{-march=@var{arch}}] [@b{-mbig-endian}|@b{-mlittle-endian}]
+ [@b{-mdsbt}|@b{-mno-dsbt}] [@b{-mpid=no}|@b{-mpid=near}|@b{-mpid=far}]
+ [@b{-mpic}|@b{-mno-pic}]
+@end ifset
+@ifset TILEGX
+
+@emph{Target TILE-Gx options:}
+ [@b{-m32}|@b{-m64}][@b{-EB}][@b{-EL}]
+@end ifset
+@ifset TILEPRO
+@c TILEPro has no machine-dependent assembler options
@end ifset
+@ifset VISIUM
+@emph{Target Visium options:}
+ [@b{-mtune=@var{arch}}]
+@end ifset
+@ifset XTENSA
+
+@emph{Target Xtensa options:}
+ [@b{--[no-]text-section-literals}] [@b{--[no-]absolute-literals}]
+ [@b{--[no-]target-align}] [@b{--[no-]longcalls}]
+ [@b{--[no-]transform}]
+ [@b{--rename-section} @var{oldname}=@var{newname}]
+ [@b{--[no-]trampolines}]
+@end ifset
@ifset Z80
@emph{Target Z80 options:}
[@b{ -forbid-undocumented-instructions}] [@b{-Fud}]
[@b{ -forbid-unportable-instructions}] [@b{-Fup}]
@end ifset
-
@ifset Z8000
+
@c Z8000 has no machine-dependent assembler options
@end ifset
-@ifset XTENSA
-@emph{Target Xtensa options:}
- [@b{--[no-]text-section-literals}] [@b{--[no-]absolute-literals}]
- [@b{--[no-]target-align}] [@b{--[no-]longcalls}]
- [@b{--[no-]transform}]
- [@b{--rename-section} @var{oldname}=@var{newname}]
-@end ifset
@c man end
@end smallexample
@item --compress-debug-sections
Compress DWARF debug sections using zlib. The debug sections are renamed
to begin with @samp{.zdebug}, and the resulting object file may not be
-compatible with older linkers and object file utilities.
+compatible with older linkers and object file utilities. Note if compression
+would make a given section @emph{larger} then it is not compressed or renamed.
+
+@ifset ELF
+@cindex @samp{--compress-debug-sections=} option
+@item --compress-debug-sections=none
+@itemx --compress-debug-sections=zlib
+@itemx --compress-debug-sections=zlib-gnu
+@itemx --compress-debug-sections=zlib-gabi
+These options control how DWARF debug sections are compressed.
+@option{--compress-debug-sections=none} is equivalent to
+@option{--nocompress-debug-sections}.
+@option{--compress-debug-sections=zlib} and
+@option{--compress-debug-sections=zlib-gnu} are equivalent to
+@option{--compress-debug-sections}.
+@option{--compress-debug-sections=zlib-gabi} compresses
+DWARF debug sections with SHF_COMPRESSED from the ELF ABI.
+@end ifset
@item --nocompress-debug-sections
Do not compress DWARF debug sections. This is the default.
may help debugging assembler code, if the debugger can handle it. Note---this
option is only supported by some targets, not all of them.
+@item --gdwarf-sections
+Instead of creating a .debug_line section, create a series of
+.debug_line.@var{foo} sections where @var{foo} is the name of the
+corresponding code section. For example a code section called @var{.text.func}
+will have its dwarf line number information placed into a section called
+@var{.debug_line.text.func}. If the code section is just called @var{.text}
+then debug line section will still be called just @var{.debug_line} without any
+suffix.
+
+@item --size-check=error
+@itemx --size-check=warning
+Issue an error or warning for invalid ELF .size directive.
+
@item --help
Print a summary of the command line options and exit.
Standard input, or source files to assemble.
@end table
+@c man end
+
+@ifset AARCH64
+@ifclear man
+@xref{AArch64 Options}, for the options available when @value{AS} is configured
+for the 64-bit mode of the ARM Architecture (AArch64).
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for the
+64-bit mode of the ARM Architecture (AArch64).
+@c man end
+@c man begin INCLUDE
+@include c-aarch64.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
+@ifset ALPHA
+
+@ifclear man
+@xref{Alpha Options}, for the options available when @value{AS} is configured
+for an Alpha processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for an Alpha
+processor.
+@c man end
+@c man begin INCLUDE
+@include c-alpha.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
+@c man begin OPTIONS
@ifset ARC
The following options are available when @value{AS} is configured for
an ARC processor.
@item -mthumb-interwork
Specify that the code has been generated with interworking between Thumb and
ARM code in mind.
+@item -mccs
+Turns on CodeComposer Studio assembly syntax compatibility mode.
@item -k
Specify that PIC code has been generated.
@end table
@end ifset
+@c man end
@ifset Blackfin
+
+@ifclear man
+@xref{Blackfin Options}, for the options available when @value{AS} is
+configured for the Blackfin processor family.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
The following options are available when @value{AS} is configured for
the Blackfin processor family.
+@c man end
+@c man begin INCLUDE
+@include c-bfin.texi
+@c ended inside the included file
+@end ifset
-@table @gcctabopt
-@item -mcpu=@var{processor}@r{[}-@var{sirevision}@r{]}
-This option specifies the target processor. The optional @var{sirevision}
-is not used in assembler.
-@item -mfdpic
-Assemble for the FDPIC ABI.
-@item -mno-fdpic
-@itemx -mnopic
-Disable -mfdpic.
-@end table
@end ifset
+@c man begin OPTIONS
@ifset CRIS
See the info pages for documentation of the CRIS-specific options.
@end ifset
Warn when a nop after a 32-bit multiply instruction is generated.
@end table
@end ifset
+@c man end
+
+@ifset EPIPHANY
+The following options are available when @value{AS} is configured for the
+Adapteva EPIPHANY series.
+@ifclear man
+@xref{Epiphany Options}, for the options available when @value{AS} is
+configured for an Epiphany processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for
+an Epiphany processor.
+@c man end
+@c man begin INCLUDE
+@include c-epiphany.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
+@ifset H8300
+
+@ifclear man
+@xref{H8/300 Options}, for the options available when @value{AS} is configured
+for an H8/300 processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for an H8/300
+processor.
+@c man end
+@c man begin INCLUDE
+@include c-h8300.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
+@ifset I80386
+
+@ifclear man
+@xref{i386-Options}, for the options available when @value{AS} is
+configured for an i386 processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for
+an i386 processor.
+@c man end
+@c man begin INCLUDE
+@include c-i386.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
+@c man begin OPTIONS
@ifset I960
The following options are available when @value{AS} is configured for the
Intel 80960 processor.
@end table
@end ifset
+@ifset NIOSII
+
+@ifclear man
+@xref{Nios II Options}, for the options available when @value{AS} is configured
+for an Altera Nios II processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for an
+Altera Nios II processor.
+@c man end
+@c man begin INCLUDE
+@include c-nios2.texi
+@c ended inside the included file
+@end ifset
+@end ifset
+
@ifset PDP11
For details about the PDP-11 machine dependent features options,
@table @gcctabopt
-@item -m68hc11 | -m68hc12 | -m68hcs12
+@item -m68hc11 | -m68hc12 | -m68hcs12 | -mm9s12x | -mm9s12xg
Specify what processor is the target. The default is
defined by the configuration option when building the assembler.
+@item --xgate-ramoffset
+Instruct the linker to offset RAM addresses from S12X address space into
+XGATE address space.
+
@item -mshort
Specify to use the 16-bit integer ABI.
Print the syntax of instruction in case of error.
@item --print-opcodes
-print the list of instructions with syntax and then exit.
+Print the list of instructions with syntax and then exit.
@item --generate-example
-print an example of instruction for each possible instruction and then exit.
+Print an example of instruction for each possible instruction and then exit.
This option is only useful for testing @command{@value{AS}}.
@end table
@ifset MIPS
The following options are available when @value{AS} is configured for
-a @sc{mips} processor.
+a MIPS processor.
@table @gcctabopt
@item -G @var{num}
@itemx -mips5
@itemx -mips32
@itemx -mips32r2
+@itemx -mips32r3
+@itemx -mips32r5
+@itemx -mips32r6
@itemx -mips64
@itemx -mips64r2
-Generate code for a particular @sc{mips} Instruction Set Architecture level.
+@itemx -mips64r3
+@itemx -mips64r5
+@itemx -mips64r6
+Generate code for a particular MIPS Instruction Set Architecture level.
@samp{-mips1} is an alias for @samp{-march=r3000}, @samp{-mips2} is an
alias for @samp{-march=r6000}, @samp{-mips3} is an alias for
@samp{-march=r4000} and @samp{-mips4} is an alias for @samp{-march=r8000}.
-@samp{-mips5}, @samp{-mips32}, @samp{-mips32r2}, @samp{-mips64}, and
-@samp{-mips64r2}
-correspond to generic
-@samp{MIPS V}, @samp{MIPS32}, @samp{MIPS32 Release 2}, @samp{MIPS64},
-and @samp{MIPS64 Release 2}
-ISA processors, respectively.
+@samp{-mips5}, @samp{-mips32}, @samp{-mips32r2}, @samp{-mips32r3},
+@samp{-mips32r5}, @samp{-mips32r6}, @samp{-mips64}, @samp{-mips64r2},
+@samp{-mips64r3}, @samp{-mips64r5}, and @samp{-mips64r6} correspond to generic
+MIPS V, MIPS32, MIPS32 Release 2, MIPS32 Release 3, MIPS32 Release 5, MIPS32
+Release 6, MIPS64, MIPS64 Release 2, MIPS64 Release 3, MIPS64 Release 5, and
+MIPS64 Release 6 ISA processors, respectively.
-@item -march=@var{CPU}
-Generate code for a particular @sc{mips} cpu.
+@item -march=@var{cpu}
+Generate code for a particular MIPS CPU.
@item -mtune=@var{cpu}
-Schedule and tune for a particular @sc{mips} cpu.
+Schedule and tune for a particular MIPS CPU.
@item -mfix7000
@itemx -mno-fix7000
Cause nops to be inserted if the read of the destination register
of an mfhi or mflo instruction occurs in the following two instructions.
+@item -mfix-rm7000
+@itemx -mno-fix-rm7000
+Cause nops to be inserted if a dmult or dmultu instruction is
+followed by a load instruction.
+
@item -mdebug
@itemx -no-mdebug
Cause stabs-style debugging output to go into an ECOFF-style .mdebug
all times. @samp{-mgp32} controls the size of general-purpose registers
and @samp{-mfp32} controls the size of floating-point registers.
+@item -mgp64
+@itemx -mfp64
+The register sizes are normally inferred from the ISA and ABI, but these
+flags force a certain group of registers to be treated as 64 bits wide at
+all times. @samp{-mgp64} controls the size of general-purpose registers
+and @samp{-mfp64} controls the size of floating-point registers.
+
+@item -mfpxx
+The register sizes are normally inferred from the ISA and ABI, but using
+this flag in combination with @samp{-mabi=32} enables an ABI variant
+which will operate correctly with floating-point registers which are
+32 or 64 bits wide.
+
+@item -modd-spreg
+@itemx -mno-odd-spreg
+Enable use of floating-point operations on odd-numbered single-precision
+registers when supported by the ISA. @samp{-mfpxx} implies
+@samp{-mno-odd-spreg}, otherwise the default is @samp{-modd-spreg}.
+
@item -mips16
@itemx -no-mips16
Generate code for the MIPS 16 processor. This is equivalent to putting
@code{.set mips16} at the start of the assembly file. @samp{-no-mips16}
turns off this option.
+@item -mmicromips
+@itemx -mno-micromips
+Generate code for the microMIPS processor. This is equivalent to putting
+@code{.set micromips} at the start of the assembly file. @samp{-mno-micromips}
+turns off this option. This is equivalent to putting @code{.set nomicromips}
+at the start of the assembly file.
+
@item -msmartmips
@itemx -mno-smartmips
Enables the SmartMIPS extension to the MIPS32 instruction set. This is
This tells the assembler to accept DSP Release 2 instructions.
@samp{-mno-dspr2} turns off this option.
+@item -mmsa
+@itemx -mno-msa
+Generate code for the MIPS SIMD Architecture Extension.
+This tells the assembler to accept MSA instructions.
+@samp{-mno-msa} turns off this option.
+
+@item -mxpa
+@itemx -mno-xpa
+Generate code for the MIPS eXtended Physical Address (XPA) Extension.
+This tells the assembler to accept XPA instructions.
+@samp{-mno-xpa} turns off this option.
+
@item -mmt
@itemx -mno-mt
Generate code for the MT Application Specific Extension.
This tells the assembler to accept MT instructions.
@samp{-mno-mt} turns off this option.
+@item -mmcu
+@itemx -mno-mcu
+Generate code for the MCU Application Specific Extension.
+This tells the assembler to accept MCU instructions.
+@samp{-mno-mcu} turns off this option.
+
+@item -minsn32
+@itemx -mno-insn32
+Only use 32-bit instruction encodings when generating code for the
+microMIPS processor. This option inhibits the use of any 16-bit
+instructions. This is equivalent to putting @code{.set insn32} at
+the start of the assembly file. @samp{-mno-insn32} turns off this
+option. This is equivalent to putting @code{.set noinsn32} at the
+start of the assembly file. By default @samp{-mno-insn32} is
+selected, allowing all instructions to be used.
+
@item --construct-floats
@itemx --no-construct-floats
The @samp{--no-construct-floats} option disables the construction of
the double width register. By default @samp{--construct-floats} is
selected, allowing construction of these floating point constants.
+@item --relax-branch
+@itemx --no-relax-branch
+The @samp{--relax-branch} option enables the relaxation of out-of-range
+branches. By default @samp{--no-relax-branch} is selected, causing any
+out-of-range branches to produce an error.
+
+@item -mnan=@var{encoding}
+Select between the IEEE 754-2008 (@option{-mnan=2008}) or the legacy
+(@option{-mnan=legacy}) NaN encoding format. The latter is the default.
+
@cindex emulation
@item --emulation=@var{name}
-This option causes @command{@value{AS}} to emulate @command{@value{AS}} configured
-for some other target, in all respects, including output format (choosing
-between ELF and ECOFF only), handling of pseudo-opcodes which may generate
-debugging information or store symbol table information, and default
-endianness. The available configuration names are: @samp{mipsecoff},
-@samp{mipself}, @samp{mipslecoff}, @samp{mipsbecoff}, @samp{mipslelf},
-@samp{mipsbelf}. The first two do not alter the default endianness from that
-of the primary target for which the assembler was configured; the others change
-the default to little- or big-endian as indicated by the @samp{b} or @samp{l}
-in the name. Using @samp{-EB} or @samp{-EL} will override the endianness
-selection in any case.
-
-This option is currently supported only when the primary target
-@command{@value{AS}} is configured for is a @sc{mips} ELF or ECOFF target.
-Furthermore, the primary target or others specified with
-@samp{--enable-targets=@dots{}} at configuration time must include support for
-the other format, if both are to be available. For example, the Irix 5
-configuration includes support for both.
-
-Eventually, this option will support more configurations, with more
-fine-grained control over the assembler's behavior, and will be supported for
-more processors.
+This option was formerly used to switch between ELF and ECOFF output
+on targets like IRIX 5 that supported both. MIPS ECOFF support was
+removed in GAS 2.24, so the option now serves little purpose.
+It is retained for backwards compatibility.
+
+The available configuration names are: @samp{mipself}, @samp{mipslelf} and
+@samp{mipsbelf}. Choosing @samp{mipself} now has no effect, since the output
+is always ELF. @samp{mipslelf} and @samp{mipsbelf} select little- and
+big-endian output respectively, but @samp{-EL} and @samp{-EB} are now the
+preferred options instead.
@item -nocpp
@command{@value{AS}} ignores this option. It is accepted for compatibility with
Assemble for a little endian target.
@end table
+@end ifset
+@c man end
+
+@ifset METAG
+
+@ifclear man
+@xref{Meta Options}, for the options available when @value{AS} is configured
+for a Meta processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for a
+Meta processor.
+@c man end
+@c man begin INCLUDE
+@include c-metag.texi
+@c ended inside the included file
+@end ifset
+
@end ifset
+@c man begin OPTIONS
@ifset MMIX
See the info pages for documentation of the MMIX-specific options.
@end ifset
+@ifset NDS32
+
+@ifclear man
+@xref{NDS32 Options}, for the options available when @value{AS} is configured
+for a NDS32 processor.
+@end ifclear
+@c ended inside the included file
+@end ifset
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for a
+NDS32 processor.
+@c man end
+@c man begin INCLUDE
+@include c-nds32.texi
+@c ended inside the included file
+@end ifset
+
+@c man end
+@ifset PPC
+
+@ifclear man
+@xref{PowerPC-Opts}, for the options available when @value{AS} is configured
+for a PowerPC processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for a
+PowerPC processor.
+@c man end
+@c man begin INCLUDE
+@include c-ppc.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
+@c man begin OPTIONS
@ifset RX
See the info pages for documentation of the RX-specific options.
@end ifset
Architecture (esa) or the z/Architecture mode (zarch).
@item -march=@var{processor}
Specify which s390 processor variant is the target, @samp{g6}, @samp{g6},
-@samp{z900}, @samp{z990}, @samp{z9-109}, @samp{z9-ec}, or @samp{z10}.
+@samp{z900}, @samp{z990}, @samp{z9-109}, @samp{z9-ec}, @samp{z10},
+@samp{z196}, @samp{zEC12}, or @samp{z13}.
@item -mregnames
@itemx -mno-regnames
Allow or disallow symbolic names for registers.
but evaluates to zero.
@end table
@end ifset
+@c man end
@ifset TIC6X
+
+@ifclear man
+@xref{TIC6X Options}, for the options available when @value{AS} is configured
+for a TMS320C6000 processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
The following options are available when @value{AS} is configured for a
TMS320C6000 processor.
+@c man end
+@c man begin INCLUDE
+@include c-tic6x.texi
+@c ended inside the included file
+@end ifset
-@table @gcctabopt
-@item -march=@var{arch}
-Enable (only) instructions from architecture @var{arch}. By default,
-all instructions are permitted.
-
-The following values of @var{arch} are accepted: @code{c62x},
-@code{c64x}, @code{c64x+}, @code{c67x}, @code{c67x+}, @code{c674x}.
-
-@item -matomic
-@itemx -mno-atomic
-Enable or disable the optional C64x+ atomic operation instructions.
-By default, they are enabled if no @option{-march} option is given, or
-if an architecture is specified with @option{-march} that implies
-these instructions are present (currently, there are no such
-architectures); they are disabled if an architecture is specified with
-@option{-march} on which the instructions are optional or not
-present. This option overrides such a default from the architecture,
-independent of the order in which the @option{-march} or
-@option{-matomic} or @option{-mno-atomic} options are passed.
-
-@item -mbig-endian
-@itemx -mlittle-endian
-Generate code for the specified endianness. The default is
-little-endian.
-@end table
+@end ifset
+
+@ifset TILEGX
+
+@ifclear man
+@xref{TILE-Gx Options}, for the options available when @value{AS} is configured
+for a TILE-Gx processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for a TILE-Gx
+processor.
+@c man end
+@c man begin INCLUDE
+@include c-tilegx.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
+@ifset VISIUM
+
+@ifclear man
+@xref{Visium Options}, for the options available when @value{AS} is configured
+for a Visium processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following option is available when @value{AS} is configured for a Visium
+processor.
+@c man end
+@c man begin INCLUDE
+@include c-visium.texi
+@c ended inside the included file
+@end ifset
@end ifset
@ifset XTENSA
-The following options are available when @value{AS} is configured for
-an Xtensa processor.
-@table @gcctabopt
-@item --text-section-literals | --no-text-section-literals
-With @option{--text-@-section-@-literals}, literal pools are interspersed
-in the text section. The default is
-@option{--no-@-text-@-section-@-literals}, which places literals in a
-separate section in the output file. These options only affect literals
-referenced via PC-relative @code{L32R} instructions; literals for
-absolute mode @code{L32R} instructions are handled separately.
-
-@item --absolute-literals | --no-absolute-literals
-Indicate to the assembler whether @code{L32R} instructions use absolute
-or PC-relative addressing. The default is to assume absolute addressing
-if the Xtensa processor includes the absolute @code{L32R} addressing
-option. Otherwise, only the PC-relative @code{L32R} mode can be used.
-
-@item --target-align | --no-target-align
-Enable or disable automatic alignment to reduce branch penalties at the
-expense of some code density. The default is @option{--target-@-align}.
-
-@item --longcalls | --no-longcalls
-Enable or disable transformation of call instructions to allow calls
-across a greater range of addresses. The default is
-@option{--no-@-longcalls}.
-
-@item --transform | --no-transform
-Enable or disable all assembler transformations of Xtensa instructions.
-The default is @option{--transform};
-@option{--no-transform} should be used only in the rare cases when the
-instructions must be exactly as specified in the assembly source.
-
-@item --rename-section @var{oldname}=@var{newname}
-When generating output sections, rename the @var{oldname} section to
-@var{newname}.
-@end table
+@ifclear man
+@xref{Xtensa Options}, for the options available when @value{AS} is configured
+for an Xtensa processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for an
+Xtensa processor.
+@c man end
+@c man begin INCLUDE
+@include c-xtensa.texi
+@c ended inside the included file
+@end ifset
+
@end ifset
+@c man begin OPTIONS
+
@ifset Z80
The following options are available when @value{AS} is configured for
a Z80 family processor.
@end ifset
@menu
-* Preprocessing:: Preprocessing
+* Preprocessing:: Preprocessing
* Whitespace:: Whitespace
* Comments:: Comments
* Symbol Intro:: Symbols
@end smallexample
@cindex line comment character
-Anything from the @dfn{line comment} character to the next newline
-is considered a comment and is ignored. The line comment character is
-@ifset ARC
-@samp{;} on the ARC;
-@end ifset
-@ifset ARM
-@samp{@@} on the ARM;
-@end ifset
-@ifset H8/300
-@samp{;} for the H8/300 family;
-@end ifset
-@ifset HPPA
-@samp{;} for the HPPA;
-@end ifset
-@ifset I80386
-@samp{#} on the i386 and x86-64;
-@end ifset
-@ifset I960
-@samp{#} on the i960;
-@end ifset
-@ifset PDP11
-@samp{;} for the PDP-11;
-@end ifset
-@ifset PJ
-@samp{;} for picoJava;
-@end ifset
-@ifset PPC
-@samp{#} for Motorola PowerPC;
-@end ifset
-@ifset S390
-@samp{#} for IBM S/390;
-@end ifset
-@ifset SCORE
-@samp{#} for the Sunplus SCORE;
-@end ifset
-@ifset SH
-@samp{!} for the Renesas / SuperH SH;
-@end ifset
-@ifset SPARC
-@samp{!} on the SPARC;
-@end ifset
-@ifset IP2K
-@samp{#} on the ip2k;
-@end ifset
-@ifset M32C
-@samp{#} on the m32c;
-@end ifset
-@ifset M32R
-@samp{#} on the m32r;
-@end ifset
-@ifset M680X0
-@samp{|} on the 680x0;
-@end ifset
-@ifset M68HC11
-@samp{#} on the 68HC11 and 68HC12;
-@end ifset
-@ifset RX
-@samp{#} on the RX;
-@end ifset
-@ifset TIC6X
-@samp{;} on the TMS320C6X;
-@end ifset
-@ifset VAX
-@samp{#} on the Vax;
-@end ifset
-@ifset Z80
-@samp{;} for the Z80;
-@end ifset
-@ifset Z8000
-@samp{!} for the Z8000;
-@end ifset
-@ifset V850
-@samp{#} on the V850;
-@end ifset
-@ifset XTENSA
-@samp{#} for Xtensa systems;
-@end ifset
-see @ref{Machine Dependencies}. @refill
-@c FIXME What about i860?
-
-@ifset GENERIC
-On some machines there are two different line comment characters. One
-character only begins a comment if it is the first non-whitespace character on
-a line, while the other always begins a comment.
-@end ifset
-
-@ifset V850
-The V850 assembler also supports a double dash as starting a comment that
-extends to the end of the line.
-
-@samp{--};
-@end ifset
+Anything from a @dfn{line comment} character up to the next newline is
+considered a comment and is ignored. The line comment character is target
+specific, and some targets multiple comment characters. Some targets also have
+line comment characters that only work if they are the first character on a
+line. Some targets use a sequence of two characters to introduce a line
+comment. Some targets can also change their line comment characters depending
+upon command line options that have been used. For more details see the
+@emph{Syntax} section in the documentation for individual targets.
+
+If the line comment character is the hash sign (@samp{#}) then it still has the
+special ability to enable and disable preprocessing (@pxref{Preprocessing}) and
+to specify logical line numbers:
@kindex #
@cindex lines starting with @code{#}
are noted in @ref{Machine Dependencies}.
@end ifset
No symbol may begin with a digit. Case is significant.
-There is no length limit: all characters are significant. Symbols are
-delimited by characters not in that set, or by the beginning of a file
-(since the source program must end with a newline, the end of a file is
-not a possible symbol delimiter). @xref{Symbols}.
+There is no length limit: all characters are significant. Multibyte characters
+are supported. Symbols are delimited by characters not in that set, or by the
+beginning of a file (since the source program must end with a newline, the end
+of a file is not a possible symbol delimiter). @xref{Symbols}.
@cindex length of symbols
@node Statements
@cindex statements, structure of
@cindex line separator character
@cindex statement separator character
-@ifclear GENERIC
-@ifclear abnormal-separator
-A @dfn{statement} ends at a newline character (@samp{\n}) or at a
-semicolon (@samp{;}). The newline or semicolon is considered part of
-the preceding statement. Newlines and semicolons within character
-constants are an exception: they do not end statements.
-@end ifclear
-@ifset abnormal-separator
-@ifset HPPA
-A @dfn{statement} ends at a newline character (@samp{\n}) or an exclamation
-point (@samp{!}). The newline or exclamation point is considered part of the
-preceding statement. Newlines and exclamation points within character
-constants are an exception: they do not end statements.
-@end ifset
-@ifset H8
-A @dfn{statement} ends at a newline character (@samp{\n}); or (for the
-H8/300) a dollar sign (@samp{$}); or (for the Renesas-SH) a semicolon
-(@samp{;}). The newline or separator character is considered part of
-the preceding statement. Newlines and separators within character
-constants are an exception: they do not end statements.
-@end ifset
-@end ifset
-@end ifclear
-@ifset GENERIC
-A @dfn{statement} ends at a newline character (@samp{\n}) or line
-separator character. (The line separator is usually @samp{;}, unless this
-conflicts with the comment character; see @ref{Machine Dependencies}.) The
-newline or separator character is considered part of the preceding
-statement. Newlines and separators within character constants are an
+
+A @dfn{statement} ends at a newline character (@samp{\n}) or a
+@dfn{line separator character}. The line separator character is target
+specific and described in the @emph{Syntax} section of each
+target's documentation. Not all targets support a line separator character.
+The newline or line separator character is considered to be part of the
+preceding statement. Newlines and separators within character constants are an
exception: they do not end statements.
-@end ifset
@cindex newline, required at file end
@cindex EOF, newline must precede
Case of letters is significant: @code{foo} is a different symbol name
than @code{Foo}.
+Multibyte characters are supported. To generate a symbol name containing
+multibyte characters enclose it within double quotes and use escape codes. cf
+@xref{Strings}. Generating a multibyte symbol name from a label is not
+currently supported.
+
Each symbol has exactly one name. Each name in an assembly language program
refers to exactly one symbol. You may use that symbol name any number of times
in a program.
Local symbols are defined and used within the assembler, but they are
normally not saved in object files. Thus, they are not visible when debugging.
-You may use the @samp{-L} option (@pxref{L, ,Include Local Symbols:
-@option{-L}}) to retain the local symbols in the object files.
+You may use the @samp{-L} option (@pxref{L, ,Include Local Symbols})
+to retain the local symbols in the object files.
@subheading Local Labels
* Ascii:: @code{.ascii "@var{string}"}@dots{}
* Asciz:: @code{.asciz "@var{string}"}@dots{}
* Balign:: @code{.balign @var{abs-expr} , @var{abs-expr}}
+* Bundle directives:: @code{.bundle_align_mode @var{abs-expr}}, @code{.bundle_lock}, @code{.bundle_unlock}
* Byte:: @code{.byte @var{expressions}}
* CFI directives:: @code{.cfi_startproc [simple]}, @code{.cfi_endproc}, etc.
* Comm:: @code{.comm @var{symbol} , @var{length} }
* Noaltmacro:: @code{.noaltmacro}
* Nolist:: @code{.nolist}
* Octa:: @code{.octa @var{bignums}}
+* Offset:: @code{.offset @var{loc}}
* Org:: @code{.org @var{new-lc}, @var{fill}}
* P2align:: @code{.p2align @var{abs-expr}, @var{abs-expr}, @var{abs-expr}}
@ifset ELF
with no-op instructions when appropriate.
The way the required alignment is specified varies from system to system.
-For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or32,
+For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or1k,
s390, sparc, tic4x, tic80 and xtensa, the first expression is the
alignment request in bytes. For example @samp{.align 8} advances
the location counter until it is a multiple of 8. If the location counter
the endianness of the processor). If it skips 1 or 3 bytes, the fill value is
undefined.
+@node Bundle directives
+@section @code{.bundle_align_mode @var{abs-expr}}
+@cindex @code{bundle_align_mode} directive
+@cindex bundle
+@cindex instruction bundle
+@cindex aligned instruction bundle
+@code{.bundle_align_mode} enables or disables @dfn{aligned instruction
+bundle} mode. In this mode, sequences of adjacent instructions are grouped
+into fixed-sized @dfn{bundles}. If the argument is zero, this mode is
+disabled (which is the default state). If the argument it not zero, it
+gives the size of an instruction bundle as a power of two (as for the
+@code{.p2align} directive, @pxref{P2align}).
+
+For some targets, it's an ABI requirement that no instruction may span a
+certain aligned boundary. A @dfn{bundle} is simply a sequence of
+instructions that starts on an aligned boundary. For example, if
+@var{abs-expr} is @code{5} then the bundle size is 32, so each aligned
+chunk of 32 bytes is a bundle. When aligned instruction bundle mode is in
+effect, no single instruction may span a boundary between bundles. If an
+instruction would start too close to the end of a bundle for the length of
+that particular instruction to fit within the bundle, then the space at the
+end of that bundle is filled with no-op instructions so the instruction
+starts in the next bundle. As a corollary, it's an error if any single
+instruction's encoding is longer than the bundle size.
+
+@section @code{.bundle_lock} and @code{.bundle_unlock}
+@cindex @code{bundle_lock} directive
+@cindex @code{bundle_unlock} directive
+The @code{.bundle_lock} and directive @code{.bundle_unlock} directives
+allow explicit control over instruction bundle padding. These directives
+are only valid when @code{.bundle_align_mode} has been used to enable
+aligned instruction bundle mode. It's an error if they appear when
+@code{.bundle_align_mode} has not been used at all, or when the last
+directive was @w{@code{.bundle_align_mode 0}}.
+
+@cindex bundle-locked
+For some targets, it's an ABI requirement that certain instructions may
+appear only as part of specified permissible sequences of multiple
+instructions, all within the same bundle. A pair of @code{.bundle_lock}
+and @code{.bundle_unlock} directives define a @dfn{bundle-locked}
+instruction sequence. For purposes of aligned instruction bundle mode, a
+sequence starting with @code{.bundle_lock} and ending with
+@code{.bundle_unlock} is treated as a single instruction. That is, the
+entire sequence must fit into a single bundle and may not span a bundle
+boundary. If necessary, no-op instructions will be inserted before the
+first instruction of the sequence so that the whole sequence starts on an
+aligned bundle boundary. It's an error if the sequence is longer than the
+bundle size.
+
+For convenience when using @code{.bundle_lock} and @code{.bundle_unlock}
+inside assembler macros (@pxref{Macro}), bundle-locked sequences may be
+nested. That is, a second @code{.bundle_lock} directive before the next
+@code{.bundle_unlock} directive has no effect except that it must be
+matched by another closing @code{.bundle_unlock} so that there is the
+same number of @code{.bundle_lock} and @code{.bundle_unlock} directives.
+
@node Byte
@section @code{.byte @var{expressions}}
The term ``octa'' comes from contexts in which a ``word'' is two bytes;
hence @emph{octa}-word for 16 bytes.
+@node Offset
+@section @code{.offset @var{loc}}
+
+@cindex @code{offset} directive
+Set the location counter to @var{loc} in the absolute section. @var{loc} must
+be an absolute expression. This directive may be useful for defining
+symbols with absolute values. Do not confuse it with the @code{.org}
+directive.
+
@node Org
@section @code{.org @var{new-lc} , @var{fill}}
writable section
@item d
data section
+@item e
+exclude section from linking
@item r
read-only section
@item x
@item STT_GNU_IFUNC
@itemx gnu_indirect_function
Mark the symbol as an indirect function when evaluated during reloc
-processing. (This is only supported on Linux targeted assemblers).
+processing. (This is only supported on assemblers targeting GNU systems).
@item STT_OBJECT
@itemx object
@item gnu_unique_object
Marks the symbol as being a globally unique data object. The dynamic linker
will make sure that in the entire process there is just one symbol with this
-name and type in use. (This is only supported on Linux targeted assemblers).
+name and type in use. (This is only supported on assemblers targeting GNU
+systems).
@end table
@item
0 for files not affected by the floating-point ABI.
@item
-1 for files using the hardware floating-point with a standard double-precision
-FPU.
+1 for files using the hardware floating-point ABI with a standard
+double-precision FPU.
@item
2 for files using the hardware floating-point ABI with a single-precision FPU.
@item
3 for files using the software floating-point ABI.
@item
-4 for files using the hardware floating-point ABI with 64-bit wide
-double-precision floating-point registers and 32-bit wide general
-purpose registers.
+4 for files using the deprecated hardware floating-point ABI which used 64-bit
+floating-point registers, 32-bit general-purpose registers and increased the
+number of callee-saved floating-point registers.
+@item
+5 for files using the hardware floating-point ABI with a double-precision FPU
+with either 32-bit or 64-bit floating-point registers and 32-bit
+general-purpose registers.
+@item
+6 for files using the hardware floating-point ABI with 64-bit floating-point
+registers and 32-bit general-purpose registers.
+@item
+7 for files using the hardware floating-point ABI with 64-bit floating-point
+registers, 32-bit general-purpose registers and a rule that forbids the
+direct use of odd-numbered single-precision floating-point registers.
@end itemize
@end table
subject, see the hardware manufacturer's manual.
@menu
+@ifset AARCH64
+* AArch64-Dependent:: AArch64 Dependent Features
+@end ifset
@ifset ALPHA
* Alpha-Dependent:: Alpha Dependent Features
@end ifset
@ifset D30V
* D30V-Dependent:: D30V Dependent Features
@end ifset
+@ifset EPIPHANY
+* Epiphany-Dependent:: EPIPHANY Dependent Features
+@end ifset
@ifset H8/300
* H8/300-Dependent:: Renesas H8/300 Dependent Features
@end ifset
@ifset M68HC11
* M68HC11-Dependent:: M68HC11 and 68HC12 Dependent Features
@end ifset
+@ifset METAG
+* Meta-Dependent :: Meta Dependent Features
+@end ifset
@ifset MICROBLAZE
* MicroBlaze-Dependent:: MICROBLAZE Dependent Features
@end ifset
@ifset MSP430
* MSP430-Dependent:: MSP430 Dependent Features
@end ifset
+@ifset NDS32
+* NDS32-Dependent:: Andes NDS32 Dependent Features
+@end ifset
+@ifset NIOSII
+* NiosII-Dependent:: Altera Nios II Dependent Features
+@end ifset
+@ifset NS32K
+* NS32K-Dependent:: NS32K Dependent Features
+@end ifset
@ifset SH
* SH-Dependent:: Renesas / SuperH SH Dependent Features
* SH64-Dependent:: SuperH SH64 Dependent Features
@ifset PPC
* PPC-Dependent:: PowerPC Dependent Features
@end ifset
+@ifset RL78
+* RL78-Dependent:: RL78 Dependent Features
+@end ifset
@ifset RX
* RX-Dependent:: RX Dependent Features
@end ifset
@ifset TIC6X
* TIC6X-Dependent :: TI TMS320C6x Dependent Features
@end ifset
+@ifset TILEGX
+* TILE-Gx-Dependent :: Tilera TILE-Gx Dependent Features
+@end ifset
+@ifset TILEPRO
+* TILEPro-Dependent :: Tilera TILEPro Dependent Features
+@end ifset
@ifset V850
* V850-Dependent:: V850 Dependent Features
@end ifset
+@ifset VAX
+* Vax-Dependent:: VAX Dependent Features
+@end ifset
+@ifset VISIUM
+* Visium-Dependent:: Visium Dependent Features
+@end ifset
+@ifset XGATE
+* XGATE-Dependent:: XGATE Features
+@end ifset
+@ifset XSTORMY16
+* XSTORMY16-Dependent:: XStormy16 Dependent Features
+@end ifset
@ifset XTENSA
* Xtensa-Dependent:: Xtensa Dependent Features
@end ifset
@ifset Z8000
* Z8000-Dependent:: Z8000 Dependent Features
@end ifset
-@ifset VAX
-* Vax-Dependent:: VAX Dependent Features
-@end ifset
@end menu
@lowersections
@c node and sectioning commands; hence the repetition of @chapter BLAH
@c in both conditional blocks.
+@ifset AARCH64
+@include c-aarch64.texi
+@end ifset
+
@ifset ALPHA
@include c-alpha.texi
@end ifset
@include c-d30v.texi
@end ifset
+@ifset EPIPHANY
+@include c-epiphany.texi
+@end ifset
+
@ifset H8/300
@include c-h8300.texi
@end ifset
@include c-m68hc11.texi
@end ifset
+@ifset METAG
+@include c-metag.texi
+@end ifset
+
@ifset MICROBLAZE
@include c-microblaze.texi
@end ifset
@include c-msp430.texi
@end ifset
+@ifset NDS32
+@include c-nds32.texi
+@end ifset
+
+@ifset NIOSII
+@include c-nios2.texi
+@end ifset
+
@ifset NS32K
@include c-ns32k.texi
@end ifset
@include c-ppc.texi
@end ifset
+@ifset RL78
+@include c-rl78.texi
+@end ifset
+
@ifset RX
@include c-rx.texi
@end ifset
@include c-tic6x.texi
@end ifset
-@ifset Z80
-@include c-z80.texi
+@ifset TILEGX
+@include c-tilegx.texi
@end ifset
-@ifset Z8000
-@include c-z8k.texi
+@ifset TILEPRO
+@include c-tilepro.texi
+@end ifset
+
+@ifset V850
+@include c-v850.texi
@end ifset
@ifset VAX
@include c-vax.texi
@end ifset
-@ifset V850
-@include c-v850.texi
+@ifset VISIUM
+@include c-visium.texi
+@end ifset
+
+@ifset XGATE
+@include c-xgate.texi
+@end ifset
+
+@ifset XSTORMY16
+@include c-xstormy16.texi
@end ifset
@ifset XTENSA
@include c-xtensa.texi
@end ifset
+@ifset Z80
+@include c-z80.texi
+@end ifset
+
+@ifset Z8000
+@include c-z8k.texi
+@end ifset
+
@ifset GENERIC
@c reverse effect of @down at top of generic Machine-Dep chapter
@raisesections
If you have contributed to GAS and your name isn't listed here,
it is not meant as a slight. We just don't know about it. Send mail to the
maintainer, and we'll correct the situation. Currently
-@c (January 1994),
-the maintainer is Ken Raeburn (email address @code{raeburn@@cygnus.com}).
+@c (October 2012),
+the maintainer is Nick Clifton (email address @code{nickc@@redhat.com}).
Dean Elsner wrote the original @sc{gnu} assembler for the VAX.@footnote{Any
more details?}
projects / deliverable / binutils-gdb.git / blobdiff