\input texinfo @c -*-Texinfo-*-
-@c Copyright (C) 1991-2015 Free Software Foundation, Inc.
+@c Copyright (C) 1991-2017 Free Software Foundation, Inc.
@c UPDATE!! On future updates--
@c (1) check for new machine-dep cmdline options in
@c md_parse_option definitions in config/tc-*.c
This file documents the GNU Assembler "@value{AS}".
@c man begin COPYRIGHT
-Copyright @copyright{} 1991-2015 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2017 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@end tex
@vskip 0pt plus 1filll
-Copyright @copyright{} 1991-2015 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2017 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
[@b{--help}] [@b{-I} @var{dir}] [@b{-J}]
[@b{-K}] [@b{-L}] [@b{--listing-lhs-width}=@var{NUM}]
[@b{--listing-lhs-width2}=@var{NUM}] [@b{--listing-rhs-width}=@var{NUM}]
- [@b{--listing-cont-lines}=@var{NUM}] [@b{--keep-locals}] [@b{-o}
- @var{objfile}] [@b{-R}] [@b{--reduce-memory-overheads}] [@b{--statistics}]
- [@b{-v}] [@b{-version}] [@b{--version}] [@b{-W}] [@b{--warn}]
- [@b{--fatal-warnings}] [@b{-w}] [@b{-x}] [@b{-Z}] [@b{@@@var{FILE}}]
- [@b{--size-check=[error|warning]}]
+ [@b{--listing-cont-lines}=@var{NUM}] [@b{--keep-locals}]
+ [@b{--no-pad-sections}]
+ [@b{-o} @var{objfile}] [@b{-R}]
+ [@b{--hash-size}=@var{NUM}] [@b{--reduce-memory-overheads}]
+ [@b{--statistics}]
+ [@b{-v}] [@b{-version}] [@b{--version}]
+ [@b{-W}] [@b{--warn}] [@b{--fatal-warnings}] [@b{-w}] [@b{-x}]
+ [@b{-Z}] [@b{@@@var{FILE}}]
+ [@b{--sectname-subst}] [@b{--size-check=[error|warning]}]
+ [@b{--elf-stt-common=[no|yes]}]
[@b{--target-help}] [@var{target-options}]
[@b{--}|@var{files} @dots{}]
@c
+@c man end
@c Target dependent options are listed below. Keep the list sorted.
@c Add an empty line for separation.
+@c man begin TARGET
@ifset AARCH64
@emph{Target AArch64 options:}
@ifset ARC
@emph{Target ARC options:}
- [@b{-marc[5|6|7|8]}]
+ [@b{-mcpu=@var{cpu}}]
+ [@b{-mA6}|@b{-mARC600}|@b{-mARC601}|@b{-mA7}|@b{-mARC700}|@b{-mEM}|@b{-mHS}]
+ [@b{-mcode-density}]
+ [@b{-mrelax}]
[@b{-EB}|@b{-EL}]
@end ifset
@ifset ARM
[@b{-mips32r3}] [@b{-mips32r5}] [@b{-mips32r6}] [@b{-mips64}] [@b{-mips64r2}]
[@b{-mips64r3}] [@b{-mips64r5}] [@b{-mips64r6}]
[@b{-construct-floats}] [@b{-no-construct-floats}]
+ [@b{-mignore-branch-isa}] [@b{-mno-ignore-branch-isa}]
[@b{-mnan=@var{encoding}}]
[@b{-trap}] [@b{-no-break}] [@b{-break}] [@b{-no-trap}]
[@b{-mips16}] [@b{-no-mips16}]
[@b{-mdmx}] [@b{-no-mdmx}]
[@b{-mdsp}] [@b{-mno-dsp}]
[@b{-mdspr2}] [@b{-mno-dspr2}]
+ [@b{-mdspr3}] [@b{-mno-dspr3}]
[@b{-mmsa}] [@b{-mno-msa}]
[@b{-mxpa}] [@b{-mno-xpa}]
[@b{-mmt}] [@b{-mno-mt}]
@b{-m440}|@b{-m464}|@b{-m476}|@b{-m7400}|@b{-m7410}|@b{-m7450}|@b{-m7455}|@b{-m750cl}|@b{-mppc64}|
@b{-m620}|@b{-me500}|@b{-e500x2}|@b{-me500mc}|@b{-me500mc64}|@b{-me5500}|@b{-me6500}|@b{-mppc64bridge}|
@b{-mbooke}|@b{-mpower4}|@b{-mpwr4}|@b{-mpower5}|@b{-mpwr5}|@b{-mpwr5x}|@b{-mpower6}|@b{-mpwr6}|
- @b{-mpower7}|@b{-mpwr7}|@b{-mpower8}|@b{-mpwr8}|@b{-ma2}|@b{-mcell}|@b{-mspe}|@b{-mtitan}|@b{-me300}|@b{-mcom}]
+ @b{-mpower7}|@b{-mpwr7}|@b{-mpower8}|@b{-mpwr8}|@b{-mpower9}|@b{-mpwr9}@b{-ma2}|
+ @b{-mcell}|@b{-mspe}|@b{-mtitan}|@b{-me300}|@b{-mcom}]
[@b{-many}] [@b{-maltivec}|@b{-mvsx}|@b{-mhtm}|@b{-mvle}]
[@b{-mregnames}|@b{-mno-regnames}]
[@b{-mrelocatable}|@b{-mrelocatable-lib}|@b{-K PIC}] [@b{-memb}]
[@b{-msolaris}|@b{-mno-solaris}]
[@b{-nops=@var{count}}]
@end ifset
+@ifset PRU
+
+@emph{Target PRU options:}
+ [@b{-link-relax}]
+ [@b{-mnolink-relax}]
+ [@b{-mno-warn-regname-label}]
+@end ifset
@ifset RL78
@emph{Target RL78 options:}
[@b{-mint-register=@var{number}}]
[@b{-mgcc-abi}|@b{-mrx-abi}]
@end ifset
+@ifset RISCV
+
+@emph{Target RISC-V options:}
+ [@b{-march}=@var{ISA}]
+ [@b{-mabi}=@var{ABI}]
+@end ifset
@ifset S390
@emph{Target s390 options:}
@emph{Target SPARC options:}
@c The order here is important. See c-sparc.texi.
- [@b{-Av6}|@b{-Av7}|@b{-Av8}|@b{-Asparclet}|@b{-Asparclite}
- @b{-Av8plus}|@b{-Av8plusa}|@b{-Av9}|@b{-Av9a}]
- [@b{-xarch=v8plus}|@b{-xarch=v8plusa}] [@b{-bump}]
+ [@b{-Av6}|@b{-Av7}|@b{-Av8}|@b{-Aleon}|@b{-Asparclet}|@b{-Asparclite}
+ @b{-Av8plus}|@b{-Av8plusa}|@b{-Av8plusb}|@b{-Av8plusc}|@b{-Av8plusd}
+ @b{-Av8plusv}|@b{-Av8plusm}|@b{-Av9}|@b{-Av9a}|@b{-Av9b}|@b{-Av9c}
+ @b{-Av9d}|@b{-Av9e}|@b{-Av9v}|@b{-Av9m}|@b{-Asparc}|@b{-Asparcvis}
+ @b{-Asparcvis2}|@b{-Asparcfmaf}|@b{-Asparcima}|@b{-Asparcvis3}
+ @b{-Asparcvisr}|@b{-Asparc5}]
+ [@b{-xarch=v8plus}|@b{-xarch=v8plusa}]|@b{-xarch=v8plusb}|@b{-xarch=v8plusc}
+ @b{-xarch=v8plusd}|@b{-xarch=v8plusv}|@b{-xarch=v8plusm}|@b{-xarch=v9}
+ @b{-xarch=v9a}|@b{-xarch=v9b}|@b{-xarch=v9c}|@b{-xarch=v9d}|@b{-xarch=v9e}
+ @b{-xarch=v9v}|@b{-xarch=v9m}|@b{-xarch=sparc}|@b{-xarch=sparcvis}
+ @b{-xarch=sparcvis2}|@b{-xarch=sparcfmaf}|@b{-xarch=sparcima}
+ @b{-xarch=sparcvis3}|@b{-xarch=sparcvisr}|@b{-xarch=sparc5}
+ @b{-bump}]
[@b{-32}|@b{-64}]
+ [@b{--enforce-aligned-data}][@b{--dcti-couples-detect}]
@end ifset
@ifset TIC54X
@ifset XTENSA
@emph{Target Xtensa options:}
- [@b{--[no-]text-section-literals}] [@b{--[no-]absolute-literals}]
+ [@b{--[no-]text-section-literals}] [@b{--[no-]auto-litpools}]
+ [@b{--[no-]absolute-literals}]
[@b{--[no-]target-align}] [@b{--[no-]longcalls}]
[@b{--[no-]transform}]
[@b{--rename-section} @var{oldname}=@var{newname}]
@end ifclear
@item --compress-debug-sections
-Compress DWARF debug sections using zlib. The debug sections are renamed
-to begin with @samp{.zdebug}, and the resulting object file may not be
-compatible with older linkers and object file utilities. Note if compression
-would make a given section @emph{larger} then it is not compressed or renamed.
+Compress DWARF debug sections using zlib with SHF_COMPRESSED from the
+ELF ABI. The resulting object file may not be compatible with older
+linkers and object file utilities. Note if compression would make a
+given section @emph{larger} then it is not compressed.
@ifset ELF
@cindex @samp{--compress-debug-sections=} option
@option{--compress-debug-sections=none} is equivalent to
@option{--nocompress-debug-sections}.
@option{--compress-debug-sections=zlib} and
-@option{--compress-debug-sections=zlib-gnu} are equivalent to
+@option{--compress-debug-sections=zlib-gabi} are equivalent to
@option{--compress-debug-sections}.
-@option{--compress-debug-sections=zlib-gabi} compresses
-DWARF debug sections with SHF_COMPRESSED from the ELF ABI.
+@option{--compress-debug-sections=zlib-gnu} compresses DWARF debug
+sections using zlib. The debug sections are renamed to begin with
+@samp{.zdebug}. Note if compression would make a given section
+@emph{larger} then it is not compressed nor renamed.
+
@end ifset
@item --nocompress-debug-sections
-Do not compress DWARF debug sections. This is the default.
+Do not compress DWARF debug sections. This is usually the default for all
+targets except the x86/x86_64, but a configure time option can be used to
+override this.
@item -D
Ignored. This option is accepted for script compatibility with calls to
then debug line section will still be called just @var{.debug_line} without any
suffix.
+@ifset ELF
@item --size-check=error
@itemx --size-check=warning
Issue an error or warning for invalid ELF .size directive.
+@item --elf-stt-common=no
+@itemx --elf-stt-common=yes
+These options control whether the ELF assembler should generate common
+symbols with the @code{STT_COMMON} type. The default can be controlled
+by a configure option @option{--enable-elf-stt-common}.
+@end ifset
+
@item --help
Print a summary of the command line options and exit.
Set the maximum number of lines printed in a listing for a single line of input
to @var{number} + 1.
+@item --no-pad-sections
+Stop the assembler for padding the ends of output sections to the alignment
+of that section. The default is to pad the sections, but this can waste space
+which might be needed on targets which have tight memory constraints.
+
@item -o @var{objfile}
Name the object-file output from @command{@value{AS}} @var{objfile}.
@item -R
Fold the data section into the text section.
-@kindex --hash-size=@var{number}
+@item --hash-size=@var{number}
Set the default size of GAS's hash tables to a prime number close to
@var{number}. Increasing this value can reduce the length of time it takes the
assembler to perform its tasks, at the expense of increasing the assembler's
assembly processes slower. Currently this switch is a synonym for
@samp{--hash-size=4051}, but in the future it may have other effects as well.
+@ifset ELF
+@item --sectname-subst
+Honor substitution sequences in section names.
+@ifclear man
+@xref{Section Name Substitutions,,@code{.section @var{name}}}.
+@end ifclear
+@end ifset
+
@item --statistics
Print the maximum space (in bytes) and total time (in seconds) used by
assembly.
@c man begin OPTIONS
@ifset ARC
-The following options are available when @value{AS} is configured for
-an ARC processor.
+The following options are available when @value{AS} is configured for an ARC
+processor.
@table @gcctabopt
-@item -marc[5|6|7|8]
+@item -mcpu=@var{cpu}
This option selects the core processor variant.
@item -EB | -EL
Select either big-endian (-EB) or little-endian (-EL) output.
+@item -mcode-density
+Enable Code Density extenssion instructions.
@end table
@end ifset
@end table
@end ifset
+@ifset PRU
+
+@ifclear man
+@xref{PRU Options}, for the options available when @value{AS} is configured
+for a PRU processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for a
+PRU processor.
+@c man end
+@c man begin INCLUDE
+@include c-pru.texi
+@c ended inside the included file
+@end ifset
+@end ifset
+
@ifset M68HC11
The following options are available when @value{AS} is configured for the
Motorola 68HC11 or 68HC12 series.
@end ifset
@ifset MIPS
+@c man begin OPTIONS
The following options are available when @value{AS} is configured for
a MIPS processor.
@item -mdspr2
@itemx -mno-dspr2
Generate code for the DSP Release 2 Application Specific Extension.
-This option implies -mdsp.
+This option implies @samp{-mdsp}.
This tells the assembler to accept DSP Release 2 instructions.
@samp{-mno-dspr2} turns off this option.
+@item -mdspr3
+@itemx -mno-dspr3
+Generate code for the DSP Release 3 Application Specific Extension.
+This option implies @samp{-mdsp} and @samp{-mdspr2}.
+This tells the assembler to accept DSP Release 3 instructions.
+@samp{-mno-dspr3} turns off this option.
+
@item -mmsa
@itemx -mno-msa
Generate code for the MIPS SIMD Architecture Extension.
branches. By default @samp{--no-relax-branch} is selected, causing any
out-of-range branches to produce an error.
+@item -mignore-branch-isa
+@itemx -mno-ignore-branch-isa
+Ignore branch checks for invalid transitions between ISA modes. The
+semantics of branches does not provide for an ISA mode switch, so in
+most cases the ISA mode a branch has been encoded for has to be the
+same as the ISA mode of the branch's target label. Therefore GAS has
+checks implemented that verify in branch assembly that the two ISA
+modes match. @samp{-mignore-branch-isa} disables these checks. By
+default @samp{-mno-ignore-branch-isa} is selected, causing any invalid
+branch requiring a transition between ISA modes to produce an error.
+
@item -mnan=@var{encoding}
Select between the IEEE 754-2008 (@option{-mnan=2008}) or the legacy
(@option{-mnan=legacy}) NaN encoding format. The latter is the default.
When this option is used, @command{@value{AS}} will issue a warning every
time it generates a nop instruction from a macro.
@end table
+@c man end
@end ifset
@ifset MCORE
@end ifset
+@ifset RISCV
+
+@ifclear man
+@xref{RISC-V-Opts}, for the options available when @value{AS} is configured
+for a RISC-V processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for a
+RISC-V processor.
+@c man end
+@c man begin INCLUDE
+@include c-riscv.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
@c man begin OPTIONS
@ifset RX
See the info pages for documentation of the RX-specific options.
Select the architecture mode, either the Enterprise System
Architecture (esa) or the z/Architecture mode (zarch).
@item -march=@var{processor}
-Specify which s390 processor variant is the target, @samp{g6}, @samp{g6},
-@samp{z900}, @samp{z990}, @samp{z9-109}, @samp{z9-ec}, @samp{z10},
-@samp{z196}, @samp{zEC12}, or @samp{z13}.
+Specify which s390 processor variant is the target, @samp{g5} (or
+@samp{arch3}), @samp{g6}, @samp{z900} (or @samp{arch5}), @samp{z990} (or
+@samp{arch6}), @samp{z9-109}, @samp{z9-ec} (or @samp{arch7}), @samp{z10} (or
+@samp{arch8}), @samp{z196} (or @samp{arch9}), @samp{zEC12} (or @samp{arch10}),
+@samp{z13} (or @samp{arch11}), or @samp{arch12}.
@item -mregnames
@itemx -mno-regnames
Allow or disallow symbolic names for registers.
@end smallexample
@noindent
-@cindex line numbers, in warnings/errors
-(where @b{NNN} is a line number). If a logical file name has been given
-(@pxref{File,,@code{.file}}) it is used for the filename, otherwise the name of
-the current input file is used. If a logical line number was given
+@cindex file names and line numbers, in warnings/errors
+(where @b{NNN} is a line number). If both a logical file name
+(@pxref{File,,@code{.file}}) and a logical line number
@ifset GENERIC
(@pxref{Line,,@code{.line}})
@end ifset
-then it is used to calculate the number printed,
-otherwise the actual line in the current source file is printed. The
-message text is intended to be self explanatory (in the grand Unix
-tradition).
+have been given then they will be used, otherwise the file name and line number
+in the current assembler source file will be used. The message text is
+intended to be self explanatory (in the grand Unix tradition).
+
+Note the file name must be set via the logical version of the @code{.file}
+directive, not the DWARF2 version of the @code{.file} directive. For example:
+
+@smallexample
+ .file 2 "bar.c"
+ error_assembler_source
+ .file "foo.c"
+ .line 30
+ error_c_source
+@end smallexample
+
+produces this output:
+
+@smallexample
+ Assembler messages:
+ asm.s:2: Error: no such instruction: `error_assembler_source'
+ foo.c:31: Error: no such instruction: `error_c_source'
+@end smallexample
@cindex format of error messages
Error messages have the format
+
@smallexample
file_name:@b{NNN}:FATAL:Error Message Text
@end smallexample
+
The file name and line number are derived as for warning
messages. The actual message text may be rather less explanatory
because many of them aren't supposed to happen.
* listing:: --listing-XXX to configure listing output
* M:: -M or --mri to assemble in MRI compatibility mode
* MD:: --MD for dependency tracking
+* no-pad-sections:: --no-pad-sections to stop section padding
* o:: -o to name the object file
* R:: -R to join data and text sections
* statistics:: --statistics to see statistics about assembly
This feature is used in the automatic updating of makefiles.
+@node no-pad-sections
+@section Output Section Padding
+@kindex --no-pad-sections
+@cindex output section padding
+Normally the assembler will pad the end of each output section up to its
+alignment boundary. But this can waste space, which can be significant on
+memory constrained targets. So the @option{--no-pad-sections} option will
+disable this behaviour.
+
@node o
@section Name the Object File: @option{-o}
(@pxref{Include,,@code{.include}}). You can use the @sc{gnu} C compiler driver
to get other ``CPP'' style preprocessing by giving the input file a
@samp{.S} suffix. @xref{Overall Options, ,Options Controlling the Kind of
-Output, gcc.info, Using GNU CC}.
+Output, gcc info, Using GNU CC}.
Excess whitespace, comments, and character constants
cannot be used in the portions of the input text that are not
are noted in @ref{Machine Dependencies}.
@end ifset
No symbol may begin with a digit. Case is significant.
-There is no length limit: all characters are significant. Multibyte characters
+There is no length limit; all characters are significant. Multibyte characters
are supported. Symbols are delimited by characters not in that set, or by the
beginning of a file (since the source program must end with a newline, the end
of a file is not a possible symbol delimiter). @xref{Symbols}.
+
+Symbol names may also be enclosed in double quote @code{"} characters. In such
+cases any characters are allowed, except for the NUL character. If a double
+quote character is to be included in the symbol name it must be preceeded by a
+backslash @code{\} character.
@cindex length of symbols
@node Statements
@cindex escape codes, character
@cindex character escape codes
+@c NOTE: Cindex entries must not start with a backlash character.
+@c NOTE: This confuses the pdf2texi script when it is creating the
+@c NOTE: index based upon the first character and so it generates:
+@c NOTE: \initial {\\}
+@c NOTE: which then results in the error message:
+@c NOTE: Argument of \\ has an extra }.
+@c NOTE: So in the index entries below a space character has been
+@c NOTE: prepended to avoid this problem.
@table @kbd
@c @item \a
@c Mnemonic for ACKnowledge; for ASCII this is octal code 007.
@c
-@cindex @code{\b} (backspace character)
+@cindex @code{ \b} (backspace character)
@cindex backspace (@code{\b})
@item \b
Mnemonic for backspace; for ASCII this is octal code 010.
@c @item \e
@c Mnemonic for EOText; for ASCII this is octal code 004.
@c
-@cindex @code{\f} (formfeed character)
+@cindex @code{ \f} (formfeed character)
@cindex formfeed (@code{\f})
-@item \f
+@item backslash-f
Mnemonic for FormFeed; for ASCII this is octal code 014.
-@cindex @code{\n} (newline character)
+@cindex @code{ \n} (newline character)
@cindex newline (@code{\n})
@item \n
Mnemonic for newline; for ASCII this is octal code 012.
@c @item \p
@c Mnemonic for prefix; for ASCII this is octal code 033, usually known as @code{escape}.
@c
-@cindex @code{\r} (carriage return character)
-@cindex carriage return (@code{\r})
+@cindex @code{ \r} (carriage return character)
+@cindex carriage return (@code{backslash-r})
@item \r
Mnemonic for carriage-Return; for ASCII this is octal code 015.
@c Mnemonic for space; for ASCII this is octal code 040. Included for compliance with
@c other assemblers.
@c
-@cindex @code{\t} (tab)
+@cindex @code{ \t} (tab)
@cindex tab (@code{\t})
@item \t
Mnemonic for horizontal Tab; for ASCII this is octal code 011.
@c @item \x @var{digit} @var{digit} @var{digit}
@c A hexadecimal character code. The numeric code is 3 hexadecimal digits.
@c
-@cindex @code{\@var{ddd}} (octal character code)
+@cindex @code{ \@var{ddd}} (octal character code)
@cindex octal character code (@code{\@var{ddd}})
@item \ @var{digit} @var{digit} @var{digit}
An octal character code. The numeric code is 3 octal digits.
For compatibility with other Unix systems, 8 and 9 are accepted as digits:
for example, @code{\008} has the value 010, and @code{\009} the value 011.
-@cindex @code{\@var{xd...}} (hex character code)
+@cindex @code{ \@var{xd...}} (hex character code)
@cindex hex character code (@code{\@var{xd...}})
@item \@code{x} @var{hex-digits...}
A hex character code. All trailing hex digits are combined. Either upper or
lower case @code{x} works.
-@cindex @code{\\} (@samp{\} character)
+@cindex @code{ \\} (@samp{\} character)
@cindex backslash (@code{\\})
@item \\
Represents one @samp{\} character.
@c (@xref{Characters,,Character Constants}.) to represent
@c a @samp{'}.
@c
-@cindex @code{\"} (doublequote character)
+@cindex @code{ \"} (doublequote character)
@cindex doublequote (@code{\"})
@item \"
Represents one @samp{"} character. Needed in strings to represent
@cindex single character constant
@cindex character, single
@cindex constant, single character
-A single character may be written as a single quote immediately
-followed by that character. The same escapes apply to characters as
-to strings. So if you want to write the character backslash, you
-must write @kbd{'\\} where the first @code{\} escapes the second
-@code{\}. As you can see, the quote is an acute accent, not a
-grave accent. A newline
+A single character may be written as a single quote immediately followed by
+that character. Some backslash escapes apply to characters, @code{\b},
+@code{\f}, @code{\n}, @code{\r}, @code{\t}, and @code{\"} with the same meaning
+as for strings, plus @code{\'} for a single quote. So if you want to write the
+character backslash, you must write @kbd{'\\} where the first @code{\} escapes
+the second @code{\}. As you can see, the quote is an acute accent, not a grave
+accent. A newline
@ifclear GENERIC
@ifclear abnormal-separator
(or semicolon @samp{;})
programmers use names temporarily. They create symbols which are guaranteed to
be unique over the entire scope of the input source code and which can be
referred to by a simple notation. To define a local label, write a label of
-the form @samp{@b{N}:} (where @b{N} represents any positive integer). To refer
-to the most recent previous definition of that label write @samp{@b{N}b}, using
-the same number as when you defined the label. To refer to the next definition
-of a local label, write @samp{@b{N}f}---the @samp{b} stands for ``backwards''
-and the @samp{f} stands for ``forwards''.
+the form @samp{@b{N}:} (where @b{N} represents any non-negative integer).
+To refer to the most recent previous definition of that label write
+@samp{@b{N}b}, using the same number as when you defined the label. To refer
+to the next definition of a local label, write @samp{@b{N}f}. The @samp{b}
+stands for ``backwards'' and the @samp{f} stands for ``forwards''.
There is no restriction on how you can use these labels, and you can reuse them
too. So that it is possible to repeatedly define the same local label (using
@cindex pseudo-ops, machine independent
@cindex machine independent directives
All assembler directives have names that begin with a period (@samp{.}).
-The rest of the name is letters, usually in lower case.
+The names are case insensitive for most targets, and usually written
+in lower case.
This chapter discusses directives that are available regardless of the
target machine configuration for the @sc{gnu} assembler.
@ifclear no-space-dir
* Zero:: @code{.zero @var{size}}
@end ifclear
+@ifset ELF
+* 2byte:: @code{.2byte @var{expressions}}
+* 4byte:: @code{.4byte @var{expressions}}
+* 8byte:: @code{.8byte @var{bignums}}
+@end ifset
* Deprecated:: Deprecated Directives
@end menu
On targets that support compact unwinding tables these can be generated
by specifying @code{.eh_frame_entry} instead of @code{.eh_frame}.
+Some targets may support an additional name, such as @code{.c6xabi.exidx}
+which is used by the @value{TIC6X} target.
+
+The @code{.cfi_sections} directive can be repeated, with the same or different
+arguments, provided that CFI generation has not yet started. Once CFI
+generation has started however the section list is fixed and any attempts to
+redefine it will result in an error.
+
@subsection @code{.cfi_startproc [simple]}
@cindex @code{cfi_startproc} directive
@code{.cfi_startproc} is used at the beginning of each function that
with @code{.cfi_sections eh_frame_entry}.
@subsection @code{.cfi_lsda @var{encoding} [, @var{exp}]}
-@section @code{.cfi_lsda @var{encoding} [, @var{exp}]}
@code{.cfi_lsda} defines LSDA and its encoding.
@var{encoding} must be a constant determining how the LSDA
should be encoded. If it is 255 (@code{DW_EH_PE_omit}), the second
@subsection @code{.cfi_adjust_cfa_offset @var{offset}}
Same as @code{.cfi_def_cfa_offset} but @var{offset} is a relative
-value that is added/substracted from the previous offset.
+value that is added/subtracted from the previous offset.
@subsection @code{.cfi_offset @var{register}, @var{offset}}
Previous value of @var{register} is saved at offset @var{offset} from
CFA.
+@subsection @code{.cfi_val_offset @var{register}, @var{offset}}
+Previous value of @var{register} is CFA + @var{offset}.
+
@subsection @code{.cfi_rel_offset @var{register}, @var{offset}}
Previous value of @var{register} is saved at offset @var{offset} from
the current CFA register. This is transformed to @code{.cfi_offset}
Current value of @var{register} is the same like in the previous frame,
i.e. no restoration needed.
-@subsection @code{.cfi_remember_state},
-First save all current rules for all registers by @code{.cfi_remember_state},
-then totally screw them up by subsequent @code{.cfi_*} directives and when
-everything is hopelessly bad, use @code{.cfi_restore_state} to restore
-the previous saved state.
+@subsection @code{.cfi_remember_state} and @code{.cfi_restore_state}
+@code{.cfi_remember_state} pushes the set of rules for every register onto an
+implicit stack, while @code{.cfi_restore_state} pops them off the stack and
+places them in the current row. This is useful for situations where you have
+multiple @code{.cfi_*} directives that need to be undone due to the control
+flow of the program. For example, we could have something like this (assuming
+the CFA is the value of @code{rbp}):
+
+@smallexample
+ je label
+ popq %rbx
+ .cfi_restore %rbx
+ popq %r12
+ .cfi_restore %r12
+ popq %rbp
+ .cfi_restore %rbp
+ .cfi_def_cfa %rsp, 8
+ ret
+label:
+ /* Do something else */
+@end smallexample
+
+Here, we want the @code{.cfi} directives to affect only the rows corresponding
+to the instructions before @code{label}. This means we'd have to add multiple
+@code{.cfi} directives after @code{label} to recreate the original save
+locations of the registers, as well as setting the CFA back to the value of
+@code{rbp}. This would be clumsy, and result in a larger binary size. Instead,
+we can write:
+
+@smallexample
+ je label
+ popq %rbx
+ .cfi_remember_state
+ .cfi_restore %rbx
+ popq %r12
+ .cfi_restore %r12
+ popq %rbp
+ .cfi_restore %rbp
+ .cfi_def_cfa %rsp, 8
+ ret
+label:
+ .cfi_restore_state
+ /* Do something else */
+@end smallexample
+
+That way, the rules for the instructions after @code{label} will be the same
+as before the first @code{.cfi_restore} without having to use multiple
+@code{.cfi} directives.
@subsection @code{.cfi_return_column @var{register}}
Change return column @var{register}, i.e. the return address is either
@ifset Z80
The syntax for @code{equ} on the Z80 is
@samp{@var{symbol} equ @var{expression}}.
-On the Z80 it is an eror if @var{symbol} is already defined,
+On the Z80 it is an error if @var{symbol} is already defined,
but the symbol is not protected from later redefinition.
Compare @ref{Equiv}.
@end ifset
If the optional argument is quoted, it is taken as flags to use for the
section. Each flag is a single character. The following flags are recognized:
+
@table @code
@item b
bss section (uninitialized data)
.section @var{name} [, "@var{flags}"[, @@@var{type}[,@var{flag_specific_arguments}]]]
@end smallexample
+@anchor{Section Name Substitutions}
+@kindex --sectname-subst
+@cindex section name substitution
+If the @samp{--sectname-subst} command-line option is provided, the @var{name}
+argument may contain a substitution sequence. Only @code{%S} is supported
+at the moment, and substitutes the current section name. For example:
+
+@smallexample
+.macro exception_code
+.section %S.exception
+[exception code here]
+.previous
+.endm
+
+.text
+[code]
+exception_code
+[...]
+
+.section .init
+[init code]
+exception_code
+[...]
+@end smallexample
+
+The two @code{exception_code} invocations above would create the
+@code{.text.exception} and @code{.init.exception} sections respectively.
+This is useful e.g. to discriminate between ancillary sections that are
+tied to setup code to be discarded after use from ancillary sections that
+need to stay resident without having to define multiple @code{exception_code}
+macros just for that purpose.
+
The optional @var{flags} argument is a quoted string which may contain any
combination of the following characters:
+
@table @code
@item a
section is allocatable
section is used for thread-local-storage
@item ?
section is a member of the previously-current section's group, if any
+@item @code{<number>}
+a numeric value indicating the bits to be set in the ELF section header's flags
+field. Note - if one or more of the alphabetic characters described above is
+also included in the flags field, their bit values will be ORed into the
+resulting value.
+@item @code{<target specific>}
+some targets extend this list with their own flag characters
@end table
+Note - once a section's flags have been set they cannot be changed. There are
+a few exceptions to this rule however. Processor and application specific
+flags can be added to an already defined section. The @code{.interp},
+@code{.strtab} and @code{.symtab} sections can have the allocate flag
+(@code{a}) set after they are initially defined, and the @code{.note-GNU-stack}
+section may have the executable (@code{x}) flag added.
+
The optional @var{type} argument may contain one of the following constants:
+
@table @code
@item @@progbits
section contains data
section contains an array of pointers to finish functions
@item @@preinit_array
section contains an array of pointers to pre-init functions
+@item @@@code{<number>}
+a numeric value to be set as the ELF section header's type field.
+@item @@@code{<target specific>}
+some targets extend this list with their own types
@end table
-Many targets only support the first three section types.
+Many targets only support the first three section types. The type may be
+enclosed in double quotes if necessary.
Note on targets where the @code{@@} character is the start of a comment (eg
ARM) then another character is used instead. For example the ARM port uses the
@code{%} character.
+Note - some sections, eg @code{.text} and @code{.data} are considered to be
+special and have fixed types. Any attempt to declare them with a different
+type will generate an error from the assembler.
+
If @var{flags} contains the @code{M} symbol then the @var{type} argument must
be specified as well as an extra argument---@var{entsize}---like this:
The @var{GroupName} field specifies the name of the section group to which this
particular section belongs. The optional linkage field can contain:
+
@table @code
@item comdat
indicates that only one copy of this section should be retained
Note that the section name is quoted. There may be a sequence of comma
separated flags:
+
@table @code
@item #alloc
section is allocatable
@item STT_TLS
@itemx tls_object
-Mark the symbol as being a thead-local data object.
+Mark the symbol as being a thread-local data object.
@item STT_COMMON
@itemx common
instead of zero. Using @samp{.zero} in this way would be confusing however.
@end ifclear
+@ifset ELF
+@node 2byte
+@section @code{.2byte @var{expression} [, @var{expression}]*}
+@cindex @code{2byte} directive
+@cindex two-byte integer
+@cindex integer, 2-byte
+
+This directive expects zero or more expressions, separated by commas. If there
+are no expressions then the directive does nothing. Otherwise each expression
+is evaluated in turn and placed in the next two bytes of the current output
+section, using the endian model of the target. If an expression will not fit
+in two bytes, a warning message is displayed and the least significant two
+bytes of the expression's value are used. If an expression cannot be evaluated
+at assembly time then relocations will be generated in order to compute the
+value at link time.
+
+This directive does not apply any alignment before or after inserting the
+values. As a result of this, if relocations are generated, they may be
+different from those used for inserting values with a guaranteed alignment.
+
+This directive is only available for ELF targets,
+
+@node 4byte
+@section @code{.4byte @var{expression} [, @var{expression}]*}
+@cindex @code{4byte} directive
+@cindex four-byte integer
+@cindex integer, 4-byte
+
+Like the @option{.2byte} directive, except that it inserts unaligned, four byte
+long values into the output.
+
+@node 8byte
+@section @code{.8byte @var{expression} [, @var{expression}]*}
+@cindex @code{8byte} directive
+@cindex eight-byte integer
+@cindex integer, 8-byte
+
+Like the @option{.8byte} directive, except that it inserts unaligned, eight
+byte long bignum values into the output.
+
+@end ifset
+
@node Deprecated
@section Deprecated Directives
@ifset PPC
* PPC-Dependent:: PowerPC Dependent Features
@end ifset
+@ifset PRU
+* PRU-Dependent:: PRU Dependent Features
+@end ifset
@ifset RL78
* RL78-Dependent:: RL78 Dependent Features
@end ifset
+@ifset RISCV
+* RISC-V-Dependent:: RISC-V Dependent Features
+@end ifset
@ifset RX
* RX-Dependent:: RX Dependent Features
@end ifset
@ifset VISIUM
* Visium-Dependent:: Visium Dependent Features
@end ifset
+@ifset WASM32
+* WebAssembly-Dependent:: WebAssembly Dependent Features
+@end ifset
@ifset XGATE
-* XGATE-Dependent:: XGATE Features
+* XGATE-Dependent:: XGATE Dependent Features
@end ifset
@ifset XSTORMY16
* XSTORMY16-Dependent:: XStormy16 Dependent Features
@include c-ppc.texi
@end ifset
+@ifset PRU
+@include c-pru.texi
+@end ifset
+
@ifset RL78
@include c-rl78.texi
@end ifset
+@ifset RISCV
+@include c-riscv.texi
+@end ifset
+
@ifset RX
@include c-rx.texi
@end ifset
@include c-visium.texi
@end ifset
+@ifset WASM32
+@include c-wasm32.texi
+@end ifset
+
@ifset XGATE
@include c-xgate.texi
@end ifset
projects / deliverable / binutils-gdb.git / blobdiff