-@c Copyright 1991, 1992, 1993, 1994, 1995, 1997, 1998, 1999, 2000,
-@c 2001, 2003, 2004, 2005, 2006, 2007, 2008, 2009
-@c Free Software Foundation, Inc.
+@c Copyright (C) 1991-2019 Free Software Foundation, Inc.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
+@c man end
+
@ifset GENERIC
@page
@node i386-Dependent
@menu
* i386-Options:: Options
* i386-Directives:: X86 specific directives
-* i386-Syntax:: AT&T Syntax versus Intel Syntax
+* i386-Syntax:: Syntactical considerations
* i386-Mnemonics:: Instruction Naming
* i386-Regs:: Register Naming
* i386-Prefixes:: Instruction Prefixes
* i386-Float:: Floating Point
* i386-SIMD:: Intel's MMX and AMD's 3DNow! SIMD Operations
* i386-LWP:: AMD's Lightweight Profiling Instructions
+* i386-BMI:: Bit Manipulation Instruction
+* i386-TBM:: AMD's Trailing Bit Manipulation Instructions
* i386-16bit:: Writing 16-bit Code
* i386-Arch:: Specifying an x86 CPU architecture
* i386-Bugs:: AT&T Syntax bugs
@cindex options for i386
@cindex options for x86-64
@cindex i386 options
-@cindex x86-64 options
+@cindex x86-64 options
The i386 version of @code{@value{AS}} has a few machine
dependent options:
-@table @code
+@c man begin OPTIONS
+@table @gcctabopt
@cindex @samp{--32} option, i386
@cindex @samp{--32} option, x86-64
+@cindex @samp{--x32} option, i386
+@cindex @samp{--x32} option, x86-64
@cindex @samp{--64} option, i386
@cindex @samp{--64} option, x86-64
-@item --32 | --64
-Select the word size, either 32 bits or 64 bits. Selecting 32-bit
-implies Intel i386 architecture, while 64-bit implies AMD x86-64
-architecture.
+@item --32 | --x32 | --64
+Select the word size, either 32 bits or 64 bits. @samp{--32}
+implies Intel i386 architecture, while @samp{--x32} and @samp{--64}
+imply AMD x86-64 architecture with 32-bit or 64-bit word-size
+respectively.
These options are only available with the ELF object file format, and
require that the necessary BFD support has been included (on a 32-bit
@item -n
By default, x86 GAS replaces multiple nop instructions used for
alignment within code sections with multi-byte nop instructions such
-as leal 0(%esi,1),%esi. This switch disables the optimization.
+as leal 0(%esi,1),%esi. This switch disables the optimization if a single
+byte nop (0x90) is explicitly specified as the fill byte for alignment.
@cindex @samp{--divide} option, i386
@item --divide
This option specifies the target processor. The assembler will
issue an error message if an attempt is made to assemble an instruction
which will not execute on the target processor. The following
-processor names are recognized:
+processor names are recognized:
@code{i8086},
@code{i186},
@code{i286},
@code{core2},
@code{corei7},
@code{l1om},
+@code{k1om},
+@code{iamcu},
@code{k6},
@code{k6_2},
@code{athlon},
@code{k8},
@code{amdfam10},
@code{bdver1},
+@code{bdver2},
+@code{bdver3},
+@code{bdver4},
+@code{znver1},
+@code{znver2},
+@code{btver1},
+@code{btver2},
@code{generic32} and
@code{generic64}.
-In addition to the basic instruction set, the assembler can be told to
+In addition to the basic instruction set, the assembler can be told to
accept various extension mnemonics. For example,
@code{-march=i686+sse4+vmx} extends @var{i686} with @var{sse4} and
@var{vmx}. The following extensions are currently supported:
@code{8087},
@code{287},
@code{387},
+@code{687},
@code{no87},
+@code{no287},
+@code{no387},
+@code{no687},
+@code{cmov},
+@code{nocmov},
+@code{fxsr},
+@code{nofxsr},
@code{mmx},
@code{nommx},
@code{sse},
@code{sse4.2},
@code{sse4},
@code{nosse},
+@code{nosse2},
+@code{nosse3},
+@code{nossse3},
+@code{nosse4.1},
+@code{nosse4.2},
+@code{nosse4},
@code{avx},
+@code{avx2},
@code{noavx},
+@code{noavx2},
+@code{adx},
+@code{rdseed},
+@code{prfchw},
+@code{smap},
+@code{mpx},
+@code{sha},
+@code{rdpid},
+@code{ptwrite},
+@code{cet},
+@code{gfni},
+@code{vaes},
+@code{vpclmulqdq},
+@code{prefetchwt1},
+@code{clflushopt},
+@code{se1},
+@code{clwb},
+@code{movdiri},
+@code{movdir64b},
+@code{avx512f},
+@code{avx512cd},
+@code{avx512er},
+@code{avx512pf},
+@code{avx512vl},
+@code{avx512bw},
+@code{avx512dq},
+@code{avx512ifma},
+@code{avx512vbmi},
+@code{avx512_4fmaps},
+@code{avx512_4vnniw},
+@code{avx512_vpopcntdq},
+@code{avx512_vbmi2},
+@code{avx512_vnni},
+@code{avx512_bitalg},
+@code{noavx512f},
+@code{noavx512cd},
+@code{noavx512er},
+@code{noavx512pf},
+@code{noavx512vl},
+@code{noavx512bw},
+@code{noavx512dq},
+@code{noavx512ifma},
+@code{noavx512vbmi},
+@code{noavx512_4fmaps},
+@code{noavx512_4vnniw},
+@code{noavx512_vpopcntdq},
+@code{noavx512_vbmi2},
+@code{noavx512_vnni},
+@code{noavx512_bitalg},
@code{vmx},
+@code{vmfunc},
@code{smx},
@code{xsave},
+@code{xsaveopt},
+@code{xsavec},
+@code{xsaves},
@code{aes},
@code{pclmul},
+@code{fsgsbase},
+@code{rdrnd},
+@code{f16c},
+@code{bmi2},
@code{fma},
@code{movbe},
@code{ept},
+@code{lzcnt},
+@code{hle},
+@code{rtm},
+@code{invpcid},
@code{clflush},
+@code{mwaitx},
+@code{clzero},
+@code{wbnoinvd},
+@code{pconfig},
+@code{waitpkg},
+@code{cldemote},
@code{lwp},
@code{fma4},
@code{xop},
+@code{cx16},
@code{syscall},
@code{rdtscp},
@code{3dnow},
@item -msse-check=@var{none}
@itemx -msse-check=@var{warning}
@itemx -msse-check=@var{error}
-These options control if the assembler should check SSE intructions.
+These options control if the assembler should check SSE instructions.
@option{-msse-check=@var{none}} will make the assembler not to check SSE
instructions, which is the default. @option{-msse-check=@var{warning}}
-will make the assembler issue a warning for any SSE intruction.
+will make the assembler issue a warning for any SSE instruction.
@option{-msse-check=@var{error}} will make the assembler issue an error
-for any SSE intruction.
+for any SSE instruction.
@cindex @samp{-mavxscalar=} option, i386
@cindex @samp{-mavxscalar=} option, x86-64
@item -mavxscalar=@var{128}
@itemx -mavxscalar=@var{256}
-This options control how the assembler should encode scalar AVX
+These options control how the assembler should encode scalar AVX
instructions. @option{-mavxscalar=@var{128}} will encode scalar
AVX instructions with 128bit vector length, which is the default.
@option{-mavxscalar=@var{256}} will encode scalar AVX instructions
with 256bit vector length.
+@cindex @samp{-mvexwig=} option, i386
+@cindex @samp{-mvexwig=} option, x86-64
+@item -mvexwig=@var{0}
+@itemx -mvexwig=@var{1}
+These options control how the assembler should encode VEX.W-ignored (WIG)
+VEX instructions. @option{-mvexwig=@var{0}} will encode WIG VEX
+instructions with vex.w = 0, which is the default.
+@option{-mvexwig=@var{1}} will encode WIG EVEX instructions with
+vex.w = 1.
+
+@cindex @samp{-mevexlig=} option, i386
+@cindex @samp{-mevexlig=} option, x86-64
+@item -mevexlig=@var{128}
+@itemx -mevexlig=@var{256}
+@itemx -mevexlig=@var{512}
+These options control how the assembler should encode length-ignored
+(LIG) EVEX instructions. @option{-mevexlig=@var{128}} will encode LIG
+EVEX instructions with 128bit vector length, which is the default.
+@option{-mevexlig=@var{256}} and @option{-mevexlig=@var{512}} will
+encode LIG EVEX instructions with 256bit and 512bit vector length,
+respectively.
+
+@cindex @samp{-mevexwig=} option, i386
+@cindex @samp{-mevexwig=} option, x86-64
+@item -mevexwig=@var{0}
+@itemx -mevexwig=@var{1}
+These options control how the assembler should encode w-ignored (WIG)
+EVEX instructions. @option{-mevexwig=@var{0}} will encode WIG
+EVEX instructions with evex.w = 0, which is the default.
+@option{-mevexwig=@var{1}} will encode WIG EVEX instructions with
+evex.w = 1.
+
@cindex @samp{-mmnemonic=} option, i386
@cindex @samp{-mmnemonic=} option, x86-64
@item -mmnemonic=@var{att}
@itemx -mmnemonic=@var{intel}
-This option specifies instruction mnemonic for matching instructions.
+This option specifies instruction mnemonic for matching instructions.
The @code{.att_mnemonic} and @code{.intel_mnemonic} directives will
take precedent.
@cindex @samp{-msyntax=} option, x86-64
@item -msyntax=@var{att}
@itemx -msyntax=@var{intel}
-This option specifies instruction syntax when processing instructions.
+This option specifies instruction syntax when processing instructions.
The @code{.att_syntax} and @code{.intel_syntax} directives will
take precedent.
@cindex @samp{-mnaked-reg} option, i386
@cindex @samp{-mnaked-reg} option, x86-64
@item -mnaked-reg
-This opetion specifies that registers don't require a @samp{%} prefix.
+This option specifies that registers don't require a @samp{%} prefix.
The @code{.att_syntax} and @code{.intel_syntax} directives will take precedent.
+@cindex @samp{-madd-bnd-prefix} option, i386
+@cindex @samp{-madd-bnd-prefix} option, x86-64
+@item -madd-bnd-prefix
+This option forces the assembler to add BND prefix to all branches, even
+if such prefix was not explicitly specified in the source code.
+
+@cindex @samp{-mshared} option, i386
+@cindex @samp{-mshared} option, x86-64
+@item -mno-shared
+On ELF target, the assembler normally optimizes out non-PLT relocations
+against defined non-weak global branch targets with default visibility.
+The @samp{-mshared} option tells the assembler to generate code which
+may go into a shared library where all non-weak global branch targets
+with default visibility can be preempted. The resulting code is
+slightly bigger. This option only affects the handling of branch
+instructions.
+
+@cindex @samp{-mbig-obj} option, x86-64
+@item -mbig-obj
+On x86-64 PE/COFF target this option forces the use of big object file
+format, which allows more than 32768 sections.
+
+@cindex @samp{-momit-lock-prefix=} option, i386
+@cindex @samp{-momit-lock-prefix=} option, x86-64
+@item -momit-lock-prefix=@var{no}
+@itemx -momit-lock-prefix=@var{yes}
+These options control how the assembler should encode lock prefix.
+This option is intended as a workaround for processors, that fail on
+lock prefix. This option can only be safely used with single-core,
+single-thread computers
+@option{-momit-lock-prefix=@var{yes}} will omit all lock prefixes.
+@option{-momit-lock-prefix=@var{no}} will encode lock prefix as usual,
+which is the default.
+
+@cindex @samp{-mfence-as-lock-add=} option, i386
+@cindex @samp{-mfence-as-lock-add=} option, x86-64
+@item -mfence-as-lock-add=@var{no}
+@itemx -mfence-as-lock-add=@var{yes}
+These options control how the assembler should encode lfence, mfence and
+sfence.
+@option{-mfence-as-lock-add=@var{yes}} will encode lfence, mfence and
+sfence as @samp{lock addl $0x0, (%rsp)} in 64-bit mode and
+@samp{lock addl $0x0, (%esp)} in 32-bit mode.
+@option{-mfence-as-lock-add=@var{no}} will encode lfence, mfence and
+sfence as usual, which is the default.
+
+@cindex @samp{-mrelax-relocations=} option, i386
+@cindex @samp{-mrelax-relocations=} option, x86-64
+@item -mrelax-relocations=@var{no}
+@itemx -mrelax-relocations=@var{yes}
+These options control whether the assembler should generate relax
+relocations, R_386_GOT32X, in 32-bit mode, or R_X86_64_GOTPCRELX and
+R_X86_64_REX_GOTPCRELX, in 64-bit mode.
+@option{-mrelax-relocations=@var{yes}} will generate relax relocations.
+@option{-mrelax-relocations=@var{no}} will not generate relax
+relocations. The default can be controlled by a configure option
+@option{--enable-x86-relax-relocations}.
+
+@cindex @samp{-mx86-used-note=} option, i386
+@cindex @samp{-mx86-used-note=} option, x86-64
+@item -mx86-used-note=@var{no}
+@itemx -mx86-used-note=@var{yes}
+These options control whether the assembler should generate
+GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_FEATURE_2_USED
+GNU property notes. The default can be controlled by the
+@option{--enable-x86-used-note} configure option.
+
+@cindex @samp{-mevexrcig=} option, i386
+@cindex @samp{-mevexrcig=} option, x86-64
+@item -mevexrcig=@var{rne}
+@itemx -mevexrcig=@var{rd}
+@itemx -mevexrcig=@var{ru}
+@itemx -mevexrcig=@var{rz}
+These options control how the assembler should encode SAE-only
+EVEX instructions. @option{-mevexrcig=@var{rne}} will encode RC bits
+of EVEX instruction with 00, which is the default.
+@option{-mevexrcig=@var{rd}}, @option{-mevexrcig=@var{ru}}
+and @option{-mevexrcig=@var{rz}} will encode SAE-only EVEX instructions
+with 01, 10 and 11 RC bits, respectively.
+
+@cindex @samp{-mamd64} option, x86-64
+@cindex @samp{-mintel64} option, x86-64
+@item -mamd64
+@itemx -mintel64
+This option specifies that the assembler should accept only AMD64 or
+Intel64 ISA in 64-bit mode. The default is to accept both.
+
+@cindex @samp{-O0} option, i386
+@cindex @samp{-O0} option, x86-64
+@cindex @samp{-O} option, i386
+@cindex @samp{-O} option, x86-64
+@cindex @samp{-O1} option, i386
+@cindex @samp{-O1} option, x86-64
+@cindex @samp{-O2} option, i386
+@cindex @samp{-O2} option, x86-64
+@cindex @samp{-Os} option, i386
+@cindex @samp{-Os} option, x86-64
+@item -O0 | -O | -O1 | -O2 | -Os
+Optimize instruction encoding with smaller instruction size. @samp{-O}
+and @samp{-O1} encode 64-bit register load instructions with 64-bit
+immediate as 32-bit register load instructions with 31-bit or 32-bits
+immediates and encode 64-bit register clearing instructions with 32-bit
+register clearing instructions. @samp{-O2} includes @samp{-O1}
+optimization plus encodes 256-bit and 512-bit vector register clearing
+instructions with 128-bit vector register clearing instructions.
+@samp{-Os} includes @samp{-O2} optimization plus encodes 16-bit, 32-bit
+and 64-bit register tests with immediate as 8-bit register test with
+immediate. @samp{-O0} turns off this optimization.
+
@end table
+@c man end
@node i386-Directives
@section x86 specific Directives
This directive is only available for COFF based x86 targets.
+@cindex @code{largecomm} directive, ELF
+@item .largecomm @var{symbol} , @var{length}[, @var{alignment}]
+This directive behaves in the same way as the @code{comm} directive
+except that the data is placed into the @var{.lbss} section instead of
+the @var{.bss} section @ref{Comm}.
+
+The directive is intended to be used for data which requires a large
+amount of space, and it is only available for ELF based x86_64
+targets.
+
@c FIXME: Document other x86 specific directives ? Eg: .code16gcc,
-@c .largecomm
@end table
@node i386-Syntax
-@section AT&T Syntax versus Intel Syntax
+@section i386 Syntactical Considerations
+@menu
+* i386-Variations:: AT&T Syntax versus Intel Syntax
+* i386-Chars:: Special Characters
+@end menu
+
+@node i386-Variations
+@subsection AT&T Syntax versus Intel Syntax
@cindex i386 intel_syntax pseudo op
@cindex intel_syntax pseudo op, i386
programs. Unix style systems expect all programs to be single sections.
@end itemize
+@node i386-Chars
+@subsection Special Characters
+
+@cindex line comment character, i386
+@cindex i386 line comment character
+The presence of a @samp{#} appearing anywhere on a line indicates the
+start of a comment that extends to the end of that line.
+
+If a @samp{#} appears as the first character of a line then the whole
+line is treated as a comment, but in this case the line can also be a
+logical line number directive (@pxref{Comments}) or a preprocessor
+control command (@pxref{Preprocessing}).
+
+If the @option{--divide} command-line option has not been specified
+then the @samp{/} character appearing anywhere on a line also
+introduces a line comment.
+
+@cindex line separator, i386
+@cindex statement separator, i386
+@cindex i386 line separator
+The @samp{;} character can be used to separate statements on the same
+line.
+
@node i386-Mnemonics
-@section Instruction Naming
+@section i386-Mnemonics
+@subsection Instruction Naming
@cindex i386 instruction naming
@cindex instruction naming, i386
@cindex encoding options, i386
@cindex encoding options, x86-64
-Different encoding options can be specified via optional mnemonic
-suffix. @samp{.s} suffix swaps 2 register operands in encoding when
-moving from one register to another.
+Different encoding options can be specified via pseudo prefixes:
+
+@itemize @bullet
+@item
+@samp{@{disp8@}} -- prefer 8-bit displacement.
+
+@item
+@samp{@{disp32@}} -- prefer 32-bit displacement.
+
+@item
+@samp{@{load@}} -- prefer load-form instruction.
+
+@item
+@samp{@{store@}} -- prefer store-form instruction.
+
+@item
+@samp{@{vex2@}} -- prefer 2-byte VEX prefix for VEX instruction.
+
+@item
+@samp{@{vex3@}} -- prefer 3-byte VEX prefix for VEX instruction.
+
+@item
+@samp{@{evex@}} -- encode with EVEX prefix.
+
+@item
+@samp{@{rex@}} -- prefer REX prefix for integer and legacy vector
+instructions (x86-64 only). Note that this differs from the @samp{rex}
+prefix which generates REX prefix unconditionally.
+
+@item
+@samp{@{nooptimize@}} -- disable instruction size optimization.
+@end itemize
@cindex conversion instructions, i386
@cindex i386 conversion instructions
AT&T syntax, but are @samp{call far} and @samp{jump far} in Intel
convention.
-@section AT&T Mnemonic versus Intel Mnemonic
+@subsection AT&T Mnemonic versus Intel Mnemonic
@cindex i386 mnemonic compatibility
@cindex mnemonic compatibility, i386
and @samp{%gs}.
@item
-the 3 processor control registers @samp{%cr0}, @samp{%cr2}, and
-@samp{%cr3}.
+the 5 processor control registers @samp{%cr0}, @samp{%cr2},
+@samp{%cr3}, @samp{%cr4}, and @samp{%cr8}.
@item
the 6 debug registers @samp{%db0}, @samp{%db1}, @samp{%db2},
@samp{%mm6} and @samp{%mm7}.
@item
-the 8 SSE registers registers @samp{%xmm0}, @samp{%xmm1}, @samp{%xmm2},
+the 8 128-bit SSE registers registers @samp{%xmm0}, @samp{%xmm1}, @samp{%xmm2},
@samp{%xmm3}, @samp{%xmm4}, @samp{%xmm5}, @samp{%xmm6} and @samp{%xmm7}.
@end itemize
the 8 extended registers @samp{%r8}--@samp{%r15}.
@item
-the 8 32-bit low ends of the extended registers: @samp{%r8d}--@samp{%r15d}
+the 8 32-bit low ends of the extended registers: @samp{%r8d}--@samp{%r15d}.
@item
-the 8 16-bit low ends of the extended registers: @samp{%r8w}--@samp{%r15w}
+the 8 16-bit low ends of the extended registers: @samp{%r8w}--@samp{%r15w}.
@item
-the 8 8-bit low ends of the extended registers: @samp{%r8b}--@samp{%r15b}
+the 8 8-bit low ends of the extended registers: @samp{%r8b}--@samp{%r15b}.
@item
the 4 8-bit registers: @samp{%sil}, @samp{%dil}, @samp{%bpl}, @samp{%spl}.
the 8 debug registers: @samp{%db8}--@samp{%db15}.
@item
-the 8 SSE registers: @samp{%xmm8}--@samp{%xmm15}.
+the 8 128-bit SSE registers: @samp{%xmm8}--@samp{%xmm15}.
+@end itemize
+
+With the AVX extensions more registers were made available:
+
+@itemize @bullet
+
+@item
+the 16 256-bit SSE @samp{%ymm0}--@samp{%ymm15} (only the first 8
+available in 32-bit mode). The bottom 128 bits are overlaid with the
+@samp{xmm0}--@samp{xmm15} registers.
+
+@end itemize
+
+The AVX2 extensions made in 64-bit mode more registers available:
+
+@itemize @bullet
+
+@item
+the 16 128-bit registers @samp{%xmm16}--@samp{%xmm31} and the 16 256-bit
+registers @samp{%ymm16}--@samp{%ymm31}.
+
+@end itemize
+
+The AVX512 extensions added the following registers:
+
+@itemize @bullet
+
+@item
+the 32 512-bit registers @samp{%zmm0}--@samp{%zmm31} (only the first 8
+available in 32-bit mode). The bottom 128 bits are overlaid with the
+@samp{%xmm0}--@samp{%xmm31} registers and the first 256 bits are
+overlaid with the @samp{%ymm0}--@samp{%ymm31} registers.
+
+@item
+the 8 mask registers @samp{%k0}--@samp{%k7}.
+
@end itemize
@node i386-Prefixes
@cite{AMD Lightweight Profiling Specification} available at
@uref{http://developer.amd.com/cpu/LWP,Lightweight Profiling Specification}.
+@node i386-BMI
+@section Bit Manipulation Instructions
+
+@cindex BMI, i386
+@cindex BMI, x86-64
+
+@code{@value{AS}} supports the Bit Manipulation (BMI) instruction set.
+
+BMI instructions provide several instructions implementing individual
+bit manipulation operations such as isolation, masking, setting, or
+resetting.
+
+@c Need to add a specification citation here when available.
+
+@node i386-TBM
+@section AMD's Trailing Bit Manipulation Instructions
+
+@cindex TBM, i386
+@cindex TBM, x86-64
+
+@code{@value{AS}} supports AMD's Trailing Bit Manipulation (TBM)
+instruction set, available on AMD's BDVER2 processors (Trinity and
+Viperfish).
+
+TBM instructions provide instructions implementing individual bit
+manipulation operations such as isolating, masking, setting, resetting,
+complementing, and operations on trailing zeros and ones.
+
+@c Need to add a specification citation here when available.
+
@node i386-16bit
@section Writing 16-bit Code
is correct since the processor default operand size is assumed to be 16
bits in a 16-bit code section.
-@node i386-Bugs
-@section AT&T Syntax bugs
-
-The UnixWare assembler, and probably other AT&T derived ix86 Unix
-assemblers, generate floating point instructions with reversed source
-and destination registers in certain cases. Unfortunately, gcc and
-possibly many other programs use this reversed syntax, so we're stuck
-with it.
-
-For example
-
-@smallexample
- fsub %st,%st(3)
-@end smallexample
-@noindent
-results in @samp{%st(3)} being updated to @samp{%st - %st(3)} rather
-than the expected @samp{%st(3) - %st}. This happens with all the
-non-commutative arithmetic floating point operations with two register
-operands where the source register is @samp{%st} and the destination
-register is @samp{%st(i)}.
-
@node i386-Arch
@section Specifying CPU Architecture
@item @samp{i486} @tab @samp{i586} @tab @samp{i686} @tab @samp{pentium}
@item @samp{pentiumpro} @tab @samp{pentiumii} @tab @samp{pentiumiii} @tab @samp{pentium4}
@item @samp{prescott} @tab @samp{nocona} @tab @samp{core} @tab @samp{core2}
-@item @samp{corei7} @tab @samp{l1om}
+@item @samp{corei7} @tab @samp{l1om} @tab @samp{k1om} @tab @samp{iamcu}
@item @samp{k6} @tab @samp{k6_2} @tab @samp{athlon} @tab @samp{k8}
-@item @samp{amdfam10} @tab @samp{bdver1}
-@item @samp{generic32} @tab @samp{generic64}
-@item @samp{.mmx} @tab @samp{.sse} @tab @samp{.sse2} @tab @samp{.sse3}
+@item @samp{amdfam10} @tab @samp{bdver1} @tab @samp{bdver2} @tab @samp{bdver3}
+@item @samp{bdver4} @tab @samp{znver1} @tab @samp{znver2} @tab @samp{btver1}
+@item @samp{btver2} @tab @samp{generic32} @tab @samp{generic64}
+@item @samp{.cmov} @tab @samp{.fxsr} @tab @samp{.mmx}
+@item @samp{.sse} @tab @samp{.sse2} @tab @samp{.sse3}
@item @samp{.ssse3} @tab @samp{.sse4.1} @tab @samp{.sse4.2} @tab @samp{.sse4}
-@item @samp{.avx} @tab @samp{.vmx} @tab @samp{.smx} @tab @samp{.xsave}
-@item @samp{.aes} @tab @samp{.pclmul} @tab @samp{.fma} @tab @samp{.movbe}
-@item @samp{.ept} @tab @samp{.clflush}
+@item @samp{.avx} @tab @samp{.vmx} @tab @samp{.smx} @tab @samp{.ept}
+@item @samp{.clflush} @tab @samp{.movbe} @tab @samp{.xsave} @tab @samp{.xsaveopt}
+@item @samp{.aes} @tab @samp{.pclmul} @tab @samp{.fma} @tab @samp{.fsgsbase}
+@item @samp{.rdrnd} @tab @samp{.f16c} @tab @samp{.avx2} @tab @samp{.bmi2}
+@item @samp{.lzcnt} @tab @samp{.invpcid} @tab @samp{.vmfunc} @tab @samp{.hle}
+@item @samp{.rtm} @tab @samp{.adx} @tab @samp{.rdseed} @tab @samp{.prfchw}
+@item @samp{.smap} @tab @samp{.mpx} @tab @samp{.sha} @tab @samp{.prefetchwt1}
+@item @samp{.clflushopt} @tab @samp{.xsavec} @tab @samp{.xsaves} @tab @samp{.se1}
+@item @samp{.avx512f} @tab @samp{.avx512cd} @tab @samp{.avx512er} @tab @samp{.avx512pf}
+@item @samp{.avx512vl} @tab @samp{.avx512bw} @tab @samp{.avx512dq} @tab @samp{.avx512ifma}
+@item @samp{.avx512vbmi} @tab @samp{.avx512_4fmaps} @tab @samp{.avx512_4vnniw}
+@item @samp{.avx512_vpopcntdq} @tab @samp{.avx512_vbmi2} @tab @samp{.avx512_vnni}
+@item @samp{.avx512_bitalg}
+@item @samp{.clwb} @tab @samp{.rdpid} @tab @samp{.ptwrite} @tab @item @samp{.ibt}
+@item @samp{.wbnoinvd} @tab @samp{.pconfig} @tab @samp{.waitpkg} @tab @samp{.cldemote}
+@item @samp{.shstk} @tab @samp{.gfni} @tab @samp{.vaes} @tab @samp{.vpclmulqdq}
+@item @samp{.movdiri} @tab @samp{.movdir64b}
@item @samp{.3dnow} @tab @samp{.3dnowa} @tab @samp{.sse4a} @tab @samp{.sse5}
@item @samp{.syscall} @tab @samp{.rdtscp} @tab @samp{.svme} @tab @samp{.abm}
-@item @samp{.lwp} @tab @samp{.fma4} @tab @samp{.xop}
-@item @samp{.padlock}
+@item @samp{.lwp} @tab @samp{.fma4} @tab @samp{.xop} @tab @samp{.cx16}
+@item @samp{.padlock} @tab @samp{.clzero} @tab @samp{.mwaitx}
@end multitable
Apart from the warning, there are only two other effects on
.arch i8086,nojumps
@end smallexample
+@node i386-Bugs
+@section AT&T Syntax bugs
+
+The UnixWare assembler, and probably other AT&T derived ix86 Unix
+assemblers, generate floating point instructions with reversed source
+and destination registers in certain cases. Unfortunately, gcc and
+possibly many other programs use this reversed syntax, so we're stuck
+with it.
+
+For example
+
+@smallexample
+ fsub %st,%st(3)
+@end smallexample
+@noindent
+results in @samp{%st(3)} being updated to @samp{%st - %st(3)} rather
+than the expected @samp{%st(3) - %st}. This happens with all the
+non-commutative arithmetic floating point operations with two register
+operands where the source register is @samp{%st} and the destination
+register is @samp{%st(i)}.
+
@node i386-Notes
@section Notes
projects / deliverable / binutils-gdb.git / blobdiff