-@c Copyright (C) 1991, 92, 93, 94, 95, 1997 Free Software Foundation, Inc.
+@c Copyright 1991, 1992, 1993, 1994, 1995, 1997, 1999, 2000, 2001,
+@c 2002, 2003, 2004
+@c Free Software Foundation, Inc.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
@ifset GENERIC
@cindex MIPS processor
@sc{gnu} @code{@value{AS}} for @sc{mips} architectures supports several
-different @sc{mips} processors, and MIPS ISA levels I through IV. For
-information about the @sc{mips} instruction set, see @cite{MIPS RISC
-Architecture}, by Kane and Heindrich (Prentice-Hall). For an overview
-of @sc{mips} assembly conventions, see ``Appendix D: Assembly Language
-Programming'' in the same work.
+different @sc{mips} processors, and MIPS ISA levels I through V, MIPS32,
+and MIPS64. For information about the @sc{mips} instruction set, see
+@cite{MIPS RISC Architecture}, by Kane and Heindrich (Prentice-Hall).
+For an overview of @sc{mips} assembly conventions, see ``Appendix D:
+Assembly Language Programming'' in the same work.
@menu
* MIPS Opts:: Assembler options
* MIPS Object:: ECOFF object code
* MIPS Stabs:: Directives for debugging information
* MIPS ISA:: Directives to override the ISA level
+* MIPS symbol sizes:: Directives to override the size of symbols
* MIPS autoextend:: Directives for extending MIPS 16 bit instructions
* MIPS insn:: Directive to mark data as an instruction
* MIPS option stack:: Directives to save and restore options
+* MIPS ASE instruction generation overrides:: Directives to control
+ generation of MIPS ASE instructions
@end menu
@node MIPS Opts
@itemx -mips2
@itemx -mips3
@itemx -mips4
+@itemx -mips5
+@itemx -mips32
+@itemx -mips32r2
+@itemx -mips64
+@itemx -mips64r2
Generate code for a particular MIPS Instruction Set Architecture level.
@samp{-mips1} corresponds to the @sc{r2000} and @sc{r3000} processors,
@samp{-mips2} to the @sc{r6000} processor, @samp{-mips3} to the
@sc{r4000} processor, and @samp{-mips4} to the @sc{r8000} and
-@sc{r10000} processors. You can also switch instruction sets during the
-assembly; see @ref{MIPS ISA,, Directives to override the ISA level}.
+@sc{r10000} processors. @samp{-mips5}, @samp{-mips32}, @samp{-mips32r2},
+@samp{-mips64}, and @samp{-mips64r2}
+correspond to generic
+@sc{MIPS V}, @sc{MIPS32}, @sc{MIPS32 Release 2}, @sc{MIPS64},
+and @sc{MIPS64 Release 2}
+ISA processors, respectively. You can also switch
+instruction sets during the assembly; see @ref{MIPS ISA, Directives to
+override the ISA level}.
+
+@item -mgp32
+@itemx -mfp32
+Some macros have different expansions for 32-bit and 64-bit registers.
+The register sizes are normally inferred from the ISA and ABI, but these
+flags force a certain group of registers to be treated as 32 bits wide at
+all times. @samp{-mgp32} controls the size of general-purpose registers
+and @samp{-mfp32} controls the size of floating-point registers.
+
+On some MIPS variants there is a 32-bit mode flag; when this flag is
+set, 64-bit instructions generate a trap. Also, some 32-bit OSes only
+save the 32-bit registers on a context switch, so it is essential never
+to use the 64-bit registers.
+
+@item -mgp64
+Assume that 64-bit general purpose registers are available. This is
+provided in the interests of symmetry with -gp32.
@item -mips16
@itemx -no-mips16
@samp{.set mips16} at the start of the assembly file. @samp{-no-mips16}
turns off this option.
+@item -mips3d
+@itemx -no-mips3d
+Generate code for the MIPS-3D Application Specific Extension.
+This tells the assembler to accept MIPS-3D instructions.
+@samp{-no-mips3d} turns off this option.
+
+@item -mdmx
+@itemx -no-mdmx
+Generate code for the MDMX Application Specific Extension.
+This tells the assembler to accept MDMX instructions.
+@samp{-no-mdmx} turns off this option.
+
+@item -mdsp
+@itemx -mno-dsp
+Generate code for the DSP Application Specific Extension.
+This tells the assembler to accept DSP instructions.
+@samp{-mno-dsp} turns off this option.
+
+@item -mmt
+@itemx -mno-mt
+Generate code for the MT Application Specific Extension.
+This tells the assembler to accept MT instructions.
+@samp{-mno-mt} turns off this option.
+
+@item -mfix7000
+@itemx -mno-fix7000
+Cause nops to be inserted if the read of the destination register
+of an mfhi or mflo instruction occurs in the following two instructions.
+
+@item -mfix-vr4120
+@itemx -no-mfix-vr4120
+Insert nops to work around certain VR4120 errata. This option is
+intended to be used on GCC-generated code: it is not designed to catch
+all problems in hand-written assembler code.
+
+@item -mfix-vr4130
+@itemx -no-mfix-vr4130
+Insert nops to work around the VR4130 @samp{mflo}/@samp{mfhi} errata.
+
@item -m4010
@itemx -no-m4010
Generate code for the LSI @sc{r4010} chip. This tells the assembler to
instructions around accesses to the @samp{HI} and @samp{LO} registers.
@samp{-no-m4650} turns off this option.
-@c start-sanitize-tx19
-@item -m1900
-@itemx -no-m1900
-@c end-sanitize-tx19
@itemx -m3900
@itemx -no-m3900
@itemx -m4100
@itemx -no-m4100
-@c start-sanitize-vr4xxx
-@itemx -m4121
-@itemx -no-m4121
-@c end-sanitize-vr4xxx
-@c start-sanitize-4320
-@itemx -m4320
-@itemx -no-m4320
-@c end-sanitize-4320
-@c start-sanitize-tx49
-@itemx -m4900
-@itemx -no-m4900
-@c end-sanitize-tx49
-@c start-sanitize-cygnus
-@itemx -m5400
-@itemx -no-m5400
-@c end-sanitize-cygnus
-@c start-sanitize-r5900
-@itemx -m5900
-@itemx -no-m5900
-@c end-sanitize-r5900
For each option @samp{-m@var{nnnn}}, generate code for the MIPS
@sc{r@var{nnnn}} chip. This tells the assembler to accept instructions
specific to that chip, and to schedule for that chip's hazards.
-@item -mcpu=@var{cpu}
+@item -march=@var{cpu}
Generate code for a particular MIPS cpu. It is exactly equivalent to
@samp{-m@var{cpu}}, except that there are more value of @var{cpu}
understood. Valid @var{cpu} value are:
@quotation
-@c start-sanitize-tx19
-1900,
-@c end-sanitize-tx19
2000,
3000,
3900,
4000,
4010,
4100,
-@c start-sanitize-vr4xxx
4111,
-4121,
-@c end-sanitize-vr4xxx
+vr4120,
+vr4130,
+vr4181,
4300,
-@c start-sanitize-vr4320
-4320,
-@c end-sanitize-vr4320
4400,
4600,
4650,
-@c start-sanitize-tx49
-4900,
-@c end-sanitize-tx49
5000,
-@c start-sanitize-cygnus
-5400,
-@c end-sanitize-cygnus
-@c start-sanitize-r5900
-5900,
-@c end-sanitize-r5900
+rm5200,
+rm5230,
+rm5231,
+rm5261,
+rm5721,
+vr5400,
+vr5500,
6000,
+rm7000,
8000,
-10000
+rm9000,
+10000,
+12000,
+mips32-4k,
+sb1
@end quotation
+@item -mtune=@var{cpu}
+Schedule and tune for a particular MIPS cpu. Valid @var{cpu} values are
+identical to @samp{-march=@var{cpu}}.
+
+@item -mabi=@var{abi}
+Record which ABI the source code uses. The recognized arguments
+are: @samp{32}, @samp{n32}, @samp{o64}, @samp{64} and @samp{eabi}.
+
+@item -msym32
+@itemx -mno-sym32
+@cindex -msym32
+@cindex -mno-sym32
+Equivalent to adding @code{.set sym32} or @code{.set nosym32} to
+the beginning of the assembler input. @xref{MIPS symbol sizes}.
@cindex @code{-nocpp} ignored (MIPS)
@item -nocpp
@sc{gnu} @code{@value{AS}}, there is no need for @samp{-nocpp}, because the
@sc{gnu} assembler itself never runs the C preprocessor.
+@item --construct-floats
+@itemx --no-construct-floats
+@cindex --construct-floats
+@cindex --no-construct-floats
+The @code{--no-construct-floats} option disables the construction of
+double width floating point constants by loading the two halves of the
+value into the two single width floating point registers that make up
+the double width register. This feature is useful if the processor
+support the FR bit in its status register, and this bit is known (by
+the programmer) to be set. This bit prevents the aliasing of the double
+width register by the single width registers.
+
+By default @code{--construct-floats} is selected, allowing construction
+of these floating point constants.
+
@item --trap
@itemx --no-break
@c FIXME! (1) reflect these options (next item too) in option summaries;
@itemx --no-trap
Generate code to take a break exception rather than a trap exception when an
error is detected. This is the default.
+
+@item -mpdr
+@itemx -mno-pdr
+Control generation of @code{.pdr} sections. Off by default on IRIX, on
+elsewhere.
+
+@item -mshared
+@itemx -mno-shared
+When generating code using the Unix calling conventions (selected by
+@samp{-KPIC} or @samp{-mcall_shared}), gas will normally generate code
+which can go into a shared library. The @samp{-mno-shared} option
+tells gas to generate code which uses the calling convention, but can
+not go into a shared library. The resulting code is slightly more
+efficient. This option only affects the handling of the
+@samp{.cpload} and @samp{.cpsetup} pseudo-ops.
@end table
@node MIPS Object
support C++ debugging). These directives are primarily used by compilers, not
assembly language programmers!
+@node MIPS symbol sizes
+@section Directives to override the size of symbols
+
+@cindex @code{.set sym32}
+@cindex @code{.set nosym32}
+The n64 ABI allows symbols to have any 64-bit value. Although this
+provides a great deal of flexibility, it means that some macros have
+much longer expansions than their 32-bit counterparts. For example,
+the non-PIC expansion of @samp{dla $4,sym} is usually:
+
+@smallexample
+lui $4,%highest(sym)
+lui $1,%hi(sym)
+daddiu $4,$4,%higher(sym)
+daddiu $1,$1,%lo(sym)
+dsll32 $4,$4,0
+daddu $4,$4,$1
+@end smallexample
+
+whereas the 32-bit expansion is simply:
+
+@smallexample
+lui $4,%hi(sym)
+daddiu $4,$4,%lo(sym)
+@end smallexample
+
+n64 code is sometimes constructed in such a way that all symbolic
+constants are known to have 32-bit values, and in such cases, it's
+preferable to use the 32-bit expansion instead of the 64-bit
+expansion.
+
+You can use the @code{.set sym32} directive to tell the assembler
+that, from this point on, all expressions of the form
+@samp{@var{symbol}} or @samp{@var{symbol} + @var{offset}}
+have 32-bit values. For example:
+
+@smallexample
+.set sym32
+dla $4,sym
+lw $4,sym+16
+sw $4,sym+0x8000($4)
+@end smallexample
+
+will cause the assembler to treat @samp{sym}, @code{sym+16} and
+@code{sym+0x8000} as 32-bit values. The handling of non-symbolic
+addresses is not affected.
+
+The directive @code{.set nosym32} ends a @code{.set sym32} block and
+reverts to the normal behavior. It is also possible to change the
+symbol size using the command-line options @option{-msym32} and
+@option{-mno-sym32}.
+
+These options and directives are always accepted, but at present,
+they have no effect for anything other than n64.
+
@node MIPS ISA
@section Directives to override the ISA level
@kindex @code{.set mips@var{n}}
@sc{gnu} @code{@value{AS}} supports an additional directive to change
the @sc{mips} Instruction Set Architecture level on the fly: @code{.set
-mips@var{n}}. @var{n} should be a number from 0 to 4. A value from 1
-to 4 makes the assembler accept instructions for the corresponding
-@sc{isa} level, from that point on in the assembly. @code{.set
-mips@var{n}} affects not only which instructions are permitted, but also
-how certain macros are expanded. @code{.set mips0} restores the
-@sc{isa} level to its original level: either the level you selected with
-command line options, or the default for your configuration. You can
-use this feature to permit specific @sc{r4000} instructions while
-assembling in 32 bit mode. Use this directive with care!
+mips@var{n}}. @var{n} should be a number from 0 to 5, or 32, 32r2, 64
+or 64r2.
+The values other than 0 make the assembler accept instructions
+for the corresponding @sc{isa} level, from that point on in the
+assembly. @code{.set mips@var{n}} affects not only which instructions
+are permitted, but also how certain macros are expanded. @code{.set
+mips0} restores the @sc{isa} level to its original level: either the
+level you selected with command line options, or the default for your
+configuration. You can use this feature to permit specific @sc{r4000}
+instructions while assembling in 32 bit mode. Use this directive with
+care!
The directive @samp{.set mips16} puts the assembler into MIPS 16 mode,
in which it will assemble instructions for the MIPS 16 processor. Use
@samp{.set nomips16} to return to normal 32 bit mode.
-Traditional @sc{mips} assemblers do not support this directive.
+Traditional @sc{mips} assemblers do not support this directive.
@node MIPS autoextend
@section Directives for extending MIPS 16 bit instructions
to change the state of the code which invoked the macro.
Traditional @sc{mips} assemblers do not support these directives.
+
+@node MIPS ASE instruction generation overrides
+@section Directives to control generation of MIPS ASE instructions
+
+@cindex MIPS MIPS-3D instruction generation override
+@kindex @code{.set mips3d}
+@kindex @code{.set nomips3d}
+The directive @code{.set mips3d} makes the assembler accept instructions
+from the MIPS-3D Application Specific Extension from that point on
+in the assembly. The @code{.set nomips3d} directive prevents MIPS-3D
+instructions from being accepted.
+
+@cindex MIPS MDMX instruction generation override
+@kindex @code{.set mdmx}
+@kindex @code{.set nomdmx}
+The directive @code{.set mdmx} makes the assembler accept instructions
+from the MDMX Application Specific Extension from that point on
+in the assembly. The @code{.set nomdmx} directive prevents MDMX
+instructions from being accepted.
+
+@cindex MIPS DSP instruction generation override
+@kindex @code{.set dsp}
+@kindex @code{.set nodsp}
+The directive @code{.set dsp} makes the assembler accept instructions
+from the DSP Application Specific Extension from that point on
+in the assembly. The @code{.set nodsp} directive prevents DSP
+instructions from being accepted.
+
+@cindex MIPS MT instruction generation override
+@kindex @code{.set mt}
+@kindex @code{.set nomt}
+The directive @code{.set mt} makes the assembler accept instructions
+from the MT Application Specific Extension from that point on
+in the assembly. The @code{.set nomt} directive prevents MT
+instructions from being accepted.
+
+Traditional @sc{mips} assemblers do not support these directives.
projects / deliverable / binutils-gdb.git / blobdiff