-@c Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+@c Copyright (C) 1997-2015 Free Software Foundation, Inc.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
the V850E processor. This allows the linker to detect attempts to link
such code with code assembled for other processors.
+@cindex @code{-mv850e1} command line option, V850
+@item -mv850e1
+Specifies that the assembled code should be marked as being targeted at
+the V850E1 processor. This allows the linker to detect attempts to link
+such code with code assembled for other processors.
+
@cindex @code{-mv850any} command line option, V850
@item -mv850any
Specifies that the assembled code should be marked as being targeted at
architecture, together with support routines only used by the V850E
architecture.
-@end table
+@cindex @code{-mv850e2} command line option, V850
+@item -mv850e2
+Specifies that the assembled code should be marked as being targeted at
+the V850E2 processor. This allows the linker to detect attempts to link
+such code with code assembled for other processors.
+@cindex @code{-mv850e2v3} command line option, V850
+@item -mv850e2v3
+Specifies that the assembled code should be marked as being targeted at
+the V850E2V3 processor. This allows the linker to detect attempts to link
+such code with code assembled for other processors.
+
+@cindex @code{-mv850e2v4} command line option, V850
+@item -mv850e2v4
+This is an alias for @option{-mv850e3v5}.
+
+@cindex @code{-mv850e3v5} command line option, V850
+@item -mv850e3v5
+Specifies that the assembled code should be marked as being targeted at
+the V850E3V5 processor. This allows the linker to detect attempts to link
+such code with code assembled for other processors.
+
+@cindex @code{-mrelax} command line option, V850
+@item -mrelax
+Enables relaxation. This allows the .longcall and .longjump pseudo
+ops to be used in the assembler source code. These ops label sections
+of code which are either a long function call or a long branch. The
+assembler will then flag these sections of code and the linker will
+attempt to relax them.
+
+@cindex @code{-mgcc-abi} command line option, V850
+@item -mgcc-abi
+Marks the generated objecy file as supporting the old GCC ABI.
+
+@cindex @code{-mrh850-abi} command line option, V850
+@item -mrh850-abi
+Marks the generated objecy file as supporting the RH850 ABI. This is
+the default.
+
+@cindex @code{-m8byte-align} command line option, V850
+@item -m8byte-align
+Marks the generated objecy file as supporting a maximum 64-bits of
+alignment for variables defined in the source code.
+
+@cindex @code{-m4byte-align} command line option, V850
+@item -m4byte-align
+Marks the generated objecy file as supporting a maximum 32-bits of
+alignment for variables defined in the source code. This is the
+default.
+
+@end table
@node V850 Syntax
@section Syntax
@cindex line comment character, V850
@cindex V850 line comment character
-@samp{#} is the line comment character.
+@samp{#} is the line comment character. If a @samp{#} appears as the
+first character of a line, the whole line is treated as a comment, but
+in this case the line can also be a logical line number directive
+(@pxref{Comments}) or a preprocessor control command
+(@pxref{Preprocessing}).
+
+Two dashes (@samp{--}) can also be used to start a line comment.
+
+@cindex line separator, V850
+@cindex statement separator, V850
+@cindex V850 line separator
+
+The @samp{;} character can be used to separate statements on the same
+line.
+
@node V850-Regs
@subsection Register Names
@table @code
@cindex @code{offset} directive, V850
@item .offset @var{<expression>}
-Moves the offset into the current section to the specified amount.
+Moves the offset into the current section to the specified amount.
@cindex @code{section} directive, V850
@item .section "name", <type>
This is an extension to the standard .section directive. It sets the
current section to be <type> and creates an alias for this section
-called "name".
+called "name".
@cindex @code{.v850} directive, V850
@item .v850
the V850E processor. This allows the linker to detect attempts to link
such code with code assembled for other processors.
+@cindex @code{.v850e1} directive, V850
+@item .v850e1
+Specifies that the assembled code should be marked as being targeted at
+the V850E1 processor. This allows the linker to detect attempts to link
+such code with code assembled for other processors.
+
+@cindex @code{.v850e2} directive, V850
+@item .v850e2
+Specifies that the assembled code should be marked as being targeted at
+the V850E2 processor. This allows the linker to detect attempts to link
+such code with code assembled for other processors.
+
+@cindex @code{.v850e2v3} directive, V850
+@item .v850e2v3
+Specifies that the assembled code should be marked as being targeted at
+the V850E2V3 processor. This allows the linker to detect attempts to link
+such code with code assembled for other processors.
+
+@cindex @code{.v850e2v4} directive, V850
+@item .v850e2v4
+Specifies that the assembled code should be marked as being targeted at
+the V850E3V5 processor. This allows the linker to detect attempts to link
+such code with code assembled for other processors.
+
+@cindex @code{.v850e3v5} directive, V850
+@item .v850e3v5
+Specifies that the assembled code should be marked as being targeted at
+the V850E3V5 processor. This allows the linker to detect attempts to link
+such code with code assembled for other processors.
+
@end table
@node V850 Opcodes
computes the difference between the address of labels 'here' and
'there', takes the upper 16 bits of this difference, shifts it down 16
-bits and then mutliplies it by the lower 16 bits in register 5, putting
-the result into register 6.
+bits and then multiplies it by the lower 16 bits in register 5, putting
+the result into register 6.
@cindex @code{lo} pseudo-op, V850
@item lo()
@samp{movea lo(here), r6, r6}
The reason for this special behaviour is that movea performs a sign
-extention on its immediate operand. So for example if the address of
+extension on its immediate operand. So for example if the address of
'here' was 0xFFFFFFFF then without the special behaviour of the hi()
pseudo-op the movhi instruction would put 0xFFFF0000 into r6, then the
movea instruction would takes its immediate operand, 0xFFFF, sign extend
@samp{mov hilo(here), r6}
computes the absolute address of label 'here' and puts the result into
-register 6.
+register 6.
@cindex @code{sdaoff} pseudo-op, V850
@item sdaoff()
Computes the offset of the named variable from the start of the Small
Data Area (whoes address is held in register 4, the GP register) and
stores the result as a 16 bit signed value in the immediate operand
-field of the given instruction. For example:
+field of the given instruction. For example:
@samp{ld.w sdaoff(_a_variable)[gp],r6}
will put the call the function whoes address is held in the call table
at the location labeled 'table_func1'.
+@cindex @code{longcall} pseudo-op, V850
+@item .longcall @code{name}
+Indicates that the following sequence of instructions is a long call
+to function @code{name}. The linker will attempt to shorten this call
+sequence if @code{name} is within a 22bit offset of the call. Only
+valid if the @code{-mrelax} command line switch has been enabled.
+
+@cindex @code{longjump} pseudo-op, V850
+@item .longjump @code{name}
+Indicates that the following sequence of instructions is a long jump
+to label @code{name}. The linker will attempt to shorten this code
+sequence if @code{name} is within a 22bit offset of the jump. Only
+valid if the @code{-mrelax} command line switch has been enabled.
+
@end table
For information on the V850 instruction set, see @cite{V850
Family 32-/16-Bit single-Chip Microcontroller Architecture Manual} from NEC.
Ltd.
-
projects / deliverable / binutils-gdb.git / blobdiff