+/* itbl-parse.y
+ Copyright 1997, 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc.
+
+ This file is part of GAS, the GNU Assembler.
+
+ GAS is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3, or (at your option)
+ any later version.
+
+ GAS is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
%{
+
/*
Yacc grammar for instruction table entries.
=======================================================================
Original Instruction table specification document:
- MIPS Coprocessor Table Specification
- ====================================
+ MIPS Coprocessor Table Specification
+ ====================================
This document describes the format of the MIPS coprocessor table. The
table specifies a list of valid functions, data registers and control
Examples:
- gas -t cop.tbl test.s -o test.o
- gas -t /usr/local/lib/cop.tbl test.s -o test.o
- gas --itbl d:\gnu\data\cop.tbl test.s -o test.o
+ gas -t cop.tbl test.s -o test.o
+ gas -t /usr/local/lib/cop.tbl test.s -o test.o
+ gas --itbl d:\gnu\data\cop.tbl test.s -o test.o
Only one table may be supplied during a single invocation of
the assembler.
any given coprocessor "z". These instructions are already recognized
by the assembler, and are listed here only for reference.
-Class format instructions
+Class format instructions
-------------------------------------------------
-Class1: op base rt offset
- LWCz rt,offset(base)
- SWCz rt,offset(base)
-Class2: COPz sub rt rd 0
- MTCz rt,rd
- MFCz rt,rd
- CTCz rt,rd
- CFCz rt,rd
-Class3: COPz CO cofun
- COPz cofun
-Class4: COPz BC br offset
- BCzT offset
- BCzF offset
-Class5: COPz sub rt rd 0
- DMFCz rt,rd
- DMTCz rt,rd
-Class6: op base rt offset
- LDCz rt,offset(base)
- SDCz rt,offset(base)
-Class7: COPz BC br offset
- BCzTL offset
- BCzFL offset
+Class1:
+ op base rt offset
+ LWCz rt,offset (base)
+ SWCz rt,offset (base)
+Class2:
+ COPz sub rt rd 0
+ MTCz rt,rd
+ MFCz rt,rd
+ CTCz rt,rd
+ CFCz rt,rd
+Class3:
+ COPz CO cofun
+ COPz cofun
+Class4:
+ COPz BC br offset
+ BCzT offset
+ BCzF offset
+Class5:
+ COPz sub rt rd 0
+ DMFCz rt,rd
+ DMTCz rt,rd
+Class6:
+ op base rt offset
+ LDCz rt,offset (base)
+ SDCz rt,offset (base)
+Class7:
+ COPz BC br offset
+ BCzTL offset
+ BCzFL offset
The coprocessor table defines coprocessor-specific registers that can
be used with all of the above classes of instructions, where
Here is the grammar for the coprocessor table:
- table -> entry*
+ table -> entry*
- entry -> [z entrydef] [comment] '\n'
+ entry -> [z entrydef] [comment] '\n'
- entrydef -> type name val
- entrydef -> 'insn' name val funcdef ; type of entry (instruction)
+ entrydef -> type name val
+ entrydef -> 'insn' name val funcdef ; type of entry (instruction)
- z -> 'p'['0'..'3'] ; processor number
- type -> ['dreg' | 'creg' | 'greg' ] ; type of entry (register)
+ z -> 'p'['0'..'3'] ; processor number
+ type -> ['dreg' | 'creg' | 'greg' ] ; type of entry (register)
; 'dreg', 'creg' or 'greg' specifies a data, control, or general
- ; register mnemonic, respectively
- name -> [ltr|dec]* ; mnemonic of register/function
- val -> [dec|hex] ; register/function number (integer constant)
-
- funcdef -> frange flags fields
- ; bitfield range for opcode
- ; list of fields' formats
- fields -> field*
- field -> [','] ftype frange flags
- flags -> ['*' flagexpr]
- flagexpr -> '[' flagexpr ']'
- flagexpr -> val '|' flagexpr
- ftype -> [ type | 'immed' | 'addr' ]
+ ; register mnemonic, respectively
+ name -> [ltr|dec]* ; mnemonic of register/function
+ val -> [dec|hex] ; register/function number (integer constant)
+
+ funcdef -> frange flags fields
+ ; bitfield range for opcode
+ ; list of fields' formats
+ fields -> field*
+ field -> [','] ftype frange flags
+ flags -> ['*' flagexpr]
+ flagexpr -> '[' flagexpr ']'
+ flagexpr -> val '|' flagexpr
+ ftype -> [ type | 'immed' | 'addr' ]
; 'immed' specifies an immediate value; see grammar for "val" above
- ; 'addr' specifies a C identifier; name of symbol to be resolved at
- ; link time
- frange -> ':' val '-' val ; starting to ending bit positions, where
- ; where 0 is least significant bit
- frange -> (null) ; default range of 31-0 will be assumed
+ ; 'addr' specifies a C identifier; name of symbol to be resolved at
+ ; link time
+ frange -> ':' val '-' val ; starting to ending bit positions, where
+ ; where 0 is least significant bit
+ frange -> (null) ; default range of 31-0 will be assumed
- comment -> [';'|'#'] [char]*
- char -> any printable character
- ltr -> ['a'..'z'|'A'..'Z']
- dec -> ['0'..'9']* ; value in decimal
- hex -> '0x'['0'..'9' | 'a'..'f' | 'A'..'F']* ; value in hexidecimal
+ comment -> [';'|'#'] [char]*
+ char -> any printable character
+ ltr -> ['a'..'z'|'A'..'Z']
+ dec -> ['0'..'9']* ; value in decimal
+ hex -> '0x'['0'..'9' | 'a'..'f' | 'A'..'F']* ; value in hexadecimal
Examples
The table:
- p1 dreg d1 1 ; data register "d1" for COP1 has value 1
- p1 creg c3 3 ; ctrl register "c3" for COP1 has value 3
- p3 func fill 0x1f:24-20 ; function "fill" for COP3 has value 31 and
- ; no fields
+ p1 dreg d1 1 ; data register "d1" for COP1 has value 1
+ p1 creg c3 3 ; ctrl register "c3" for COP1 has value 3
+ p3 func fill 0x1f:24-20 ; function "fill" for COP3 has value 31 and
+ ; no fields
will allow the assembler to accept the following coprocessor instructions:
- LWC1 d1,0x100($2)
- fill
+ LWC1 d1,0x100 ($2)
+ fill
Here, the general purpose register "$2", and instruction "LWC1", are standard
mnemonics built-in to the MIPS assembler.
The table:
- p3 dreg d3 3 ; data register "d3" for COP3 has value 3
- p3 creg c2 22 ; control register "c2" for COP3 has value 22
- p3 func fee 0x1f:24-20 dreg:17-13 creg:12-8 immed:7-0
- ; function "fee" for COP3 has value 31, and 3 fields
- ; consisting of a data register, a control register,
- ; and an immediate value.
+ p3 dreg d3 3 ; data register "d3" for COP3 has value 3
+ p3 creg c2 22 ; control register "c2" for COP3 has value 22
+ p3 func fee 0x1f:24-20 dreg:17-13 creg:12-8 immed:7-0
+ ; function "fee" for COP3 has value 31, and 3 fields
+ ; consisting of a data register, a control register,
+ ; and an immediate value.
will allow the assembler to accept the following coprocessor instruction:
- fee d3,c2,0x1
+ fee d3,c2,0x1
and will emit the object code:
- 31-26 25 24-20 19-18 17-13 12-8 7-0
- COPz CO fun dreg creg immed
- 010011 1 11111 00 00011 10110 00000001
+ 31-26 25 24-20 19-18 17-13 12-8 7-0
+ COPz CO fun dreg creg immed
+ 010011 1 11111 00 00011 10110 00000001
- 0x4ff07601
+ 0x4ff07601
Example 3:
The table:
- p3 dreg d3 3 ; data register "d3" for COP3 has value 3
- p3 creg c2 22 ; control register "c2" for COP3 has value 22
- p3 func fuu 0x01f00001 dreg:17-13 creg:12-8
+ p3 dreg d3 3 ; data register "d3" for COP3 has value 3
+ p3 creg c2 22 ; control register "c2" for COP3 has value 22
+ p3 func fuu 0x01f00001 dreg:17-13 creg:12-8
will allow the assembler to accept the following coprocessor
instruction:
- fuu d3,c2
+ fuu d3,c2
and will emit the object code:
- 31-26 25 24-20 19-18 17-13 12-8 7-0
- COPz CO fun dreg creg
- 010011 1 11111 00 00011 10110 00000001
+ 31-26 25 24-20 19-18 17-13 12-8 7-0
+ COPz CO fun dreg creg
+ 010011 1 11111 00 00011 10110 00000001
- 0x4ff07601
+ 0x4ff07601
In this way, the programmer can force arbitrary bits of an instruction
to have predefined values.
May decide to modify the syntax to allow commas separate multiple
ranges within an instruction (range','range).
-Changes in grammar: The number of parms argument to the function entry
+Changes in grammar:
+ The number of parms argument to the function entry
was deleted from the original format such that we now count the fields.
----
FIXME! should really change lexical analyzer
-to recognize 'dreg' etc. in context sensative way.
+to recognize 'dreg' etc. in context sensitive way.
Currently function names or mnemonics may be incorrectly parsed as keywords
FIXME! hex is ambiguous with any digit
*/
-#include <stdio.h>
+#include "as.h"
+#include "itbl-lex.h"
#include "itbl-ops.h"
/* #define DEBUG */
static int sbit, ebit;
static struct itbl_entry *insn=0;
-extern int insntbl_line;
-int yyparse(void);
-int yylex(void);
+static int yyerror (const char *);
%}
-%union {
+%union
+ {
char *str;
int num;
int processor;
unsigned long val;
- }
+ }
-%token DREG CREG GREG IMMED ADDR INSN NUM ID NL PNUM
-%type <val> value flags flagexpr
-%type <num> number NUM ftype regtype pnum PNUM
-%type <str> ID name
+%token DREG CREG GREG IMMED ADDR INSN NUM ID NL PNUM
+%type <val> value flags flagexpr
+%type <num> number NUM ftype regtype pnum PNUM
+%type <str> ID name
%start insntbl
%%
-insntbl: entrys
+insntbl:
+ entrys
;
-entrys: entry entrys
+entrys:
+ entry entrys
|
;
-entry: pnum regtype name value NL
- {
- DBG(("line %d: entry pnum=%d type=%d name=%s value=x%x\n",
- insntbl_line, $1, $2, $3, $4));
- itbl_add_reg($1, $2, $3, $4);
- }
+entry:
+ pnum regtype name value NL
+ {
+ DBG (("line %d: entry pnum=%d type=%d name=%s value=x%x\n",
+ insntbl_line, $1, $2, $3, $4));
+ itbl_add_reg ($1, $2, $3, $4);
+ }
| pnum INSN name value range flags
- {
- DBG(("line %d: entry pnum=%d type=INSN name=%s value=x%x",
- insntbl_line, $1, $3, $4));
- DBG((" sbit=%d ebit=%d flags=0x%x\n", sbit, ebit, $6));
- insn=itbl_add_insn($1, $3, $4, sbit, ebit, $6);
- }
+ {
+ DBG (("line %d: entry pnum=%d type=INSN name=%s value=x%x",
+ insntbl_line, $1, $3, $4));
+ DBG ((" sbit=%d ebit=%d flags=0x%x\n", sbit, ebit, $6));
+ insn=itbl_add_insn ($1, $3, $4, sbit, ebit, $6);
+ }
fieldspecs NL
+ {}
| NL
| error NL
;
-fieldspecs: ',' fieldspec fieldspecs
+fieldspecs:
+ ',' fieldspec fieldspecs
| fieldspec fieldspecs
|
;
-ftype: regtype
- {
- DBGL2(("ftype\n"));
- $$ = $1;
- }
+ftype:
+ regtype
+ {
+ DBGL2 (("ftype\n"));
+ $$ = $1;
+ }
| ADDR
- {
- DBGL2(("addr\n"));
- $$ = ADDR;
- }
+ {
+ DBGL2 (("addr\n"));
+ $$ = ADDR;
+ }
| IMMED
- {
- DBGL2(("immed\n"));
- $$ = IMMED;
- }
+ {
+ DBGL2 (("immed\n"));
+ $$ = IMMED;
+ }
;
-fieldspec: ftype range flags
- {
- DBG(("line %d: field type=%d sbit=%d ebit=%d, flags=0x%x\n",
- insntbl_line, $1, sbit, ebit, $3));
- itbl_add_operand(insn, $1, sbit, ebit, $3);
- }
+fieldspec:
+ ftype range flags
+ {
+ DBG (("line %d: field type=%d sbit=%d ebit=%d, flags=0x%x\n",
+ insntbl_line, $1, sbit, ebit, $3));
+ itbl_add_operand (insn, $1, sbit, ebit, $3);
+ }
;
-flagexpr: NUM '|' flagexpr
- {
- $$ = $1 | $3;
- }
+flagexpr:
+ NUM '|' flagexpr
+ {
+ $$ = $1 | $3;
+ }
| '[' flagexpr ']'
- {
- $$ = $2;
- }
+ {
+ $$ = $2;
+ }
| NUM
- {
- $$ = $1;
- }
+ {
+ $$ = $1;
+ }
;
-flags: '*' flagexpr
- {
- DBGL2(("flags=%d\n", $2));
- $$ = $2;
- }
+flags:
+ '*' flagexpr
+ {
+ DBGL2 (("flags=%d\n", $2));
+ $$ = $2;
+ }
|
- {
- $$ = 0;
- }
+ {
+ $$ = 0;
+ }
;
-range: ':' NUM '-' NUM
- {
- DBGL2(("range %d %d\n", $2, $4));
- sbit = $2;
- ebit = $4;
- }
+range:
+ ':' NUM '-' NUM
+ {
+ DBGL2 (("range %d %d\n", $2, $4));
+ sbit = $2;
+ ebit = $4;
+ }
|
- {
- sbit = 31;
- ebit = 0;
- }
+ {
+ sbit = 31;
+ ebit = 0;
+ }
;
-
-pnum: PNUM
- {
- DBGL2(("pnum=%d\n",$1));
- $$ = $1;
- }
+
+pnum:
+ PNUM
+ {
+ DBGL2 (("pnum=%d\n",$1));
+ $$ = $1;
+ }
;
-regtype: DREG
- {
- DBGL2(("dreg\n"));
- $$ = DREG;
- }
+regtype:
+ DREG
+ {
+ DBGL2 (("dreg\n"));
+ $$ = DREG;
+ }
| CREG
- {
- DBGL2(("creg\n"));
- $$ = CREG;
- }
+ {
+ DBGL2 (("creg\n"));
+ $$ = CREG;
+ }
| GREG
- {
- DBGL2(("greg\n"));
- $$ = GREG;
- }
+ {
+ DBGL2 (("greg\n"));
+ $$ = GREG;
+ }
;
-name: ID
- {
- DBGL2(("name=%s\n",$1));
- $$ = $1;
- }
+name:
+ ID
+ {
+ DBGL2 (("name=%s\n",$1));
+ $$ = $1;
+ }
;
-number: NUM
- {
- DBGL2(("num=%d\n",$1));
- $$ = $1;
- }
+number:
+ NUM
+ {
+ DBGL2 (("num=%d\n",$1));
+ $$ = $1;
+ }
;
-value: NUM
- {
- DBGL2(("val=x%x\n",$1));
- $$ = $1;
- }
+value:
+ NUM
+ {
+ DBGL2 (("val=x%x\n",$1));
+ $$ = $1;
+ }
;
%%
-void yyerror(char *msg)
+static int
+yyerror (msg)
+ const char *msg;
{
- printf("line %d: %s\n", insntbl_line, msg);
+ printf ("line %d: %s\n", insntbl_line, msg);
+ return 0;
}
-
-
projects / deliverable / binutils-gdb.git / blobdiff