+# Copyright 2012
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
+
#
# These tests should be valid on all targets.
#
# This test is meaningless for the PA; the difference of two undefined
# symbols is something that is (and must be) supported on the PA.
+# The same is true for alpha-vms
#
# The MN10300 port supports link time relaxation which in turn allows
# for link time resolution of the differneces of two symbols which are
# undefined at assembly time. Hence this test will not pass for the
# MN10300. The same thing is true for the RX port as well.
if { ![istarget hppa*-*-*]
+ && ![istarget alpha*-*-*vms*]
&& ![istarget rx-*-*]
&& ![istarget mn10300-*-*]
+ && ![istarget msp430*-*-*]
&& ![istarget am3*-*-*] } then {
gas_test_error "diff1.s" "" "difference of two undefined symbols"
}
default {
# Some targets don't manage to resolve BFD_RELOC_8 for constants.
setup_xfail "alpha*-*-*" "*c30*-*-*" "*c4x*-*-*" \
- "d\[13\]0v*-*-*" "i860-*-*" "mips*-*-*" "msp430-*-*" \
- "pdp11-*-*" "sparc*-*-*" "xtensa*-*-*"
+ "d\[13\]0v*-*-*" "i860-*-*" "mips*-*-*" \
+ "pdp11-*-*" "xtensa*-*-*"
run_dump_test forward
}
}
-# aout relocs are often weird, so is mep and mips-ecoff. don't bother testing
+# aout relocs are often weird, so is mep. don't bother testing
# som doesn't use a .text section
# mmix doesn't like .L1:
# ti addresses aren't octets.
}
{ hppa*-*-hpux* } { }
{ mep-*-* } { }
- { mips*-*-ecoff* } { }
{ mmix-*-* } { }
{ tic30*-*-* } { }
{ tic4x*-*-* } { }
{ mips*-*-* } { }
{ mn10200-*-* } { }
{ mn10300-*-* } { }
+ { msp430*-*-* } { }
{ pdp11-*-* } { }
{ tic30*-*-* } { }
{ tic4x*-*-* } { }
{ z80-*-* } { }
default {
run_dump_test redef
- # The next two tests can fail if the target does not convert fixups
- # against ordinary symbols into relocations against section symbols.
- # This is usually revealed by the error message:
- # symbol `sym' required but not present
- setup_xfail "*arm*-*-*aout*" "*arm*-*-*coff" \
- "*arm*-*-pe" "m68hc*-*-*" \
- "rx-*-*" "vax*-*-*" "z8k-*-*"
+ # These targets fail redef2 because they disallow redefined
+ # symbols on relocs.
+ setup_xfail "m68hc1*-*-*" "m6811-*-*" "m6812-*-*"
+ setup_xfail "rx-*-*" "vax*-*-*" "xgate*-*-*" "z8k-*-*"
run_dump_test redef2
- setup_xfail "*-*-aix*" "bfin-*-*" "hppa*-*-hpux*" \
- "i\[3-7\]86-*-*coff" "i\[3-7\]86-*-*pe" "i\[3-7\]86-*-go32*" \
- "i\[3-7\]86-*-cygwin*" "i\[3-7\]86-*-mingw*" \
- "x86_64-*-*coff" "x86_64-*-*pe" \
- "x86_64-*-cygwin*" "x86_64-*-mingw*" \
- "m68hc*-*-*" "or32-*-*" "rx-*-*" "vax*-*-*" "z8k-*-*"
+ setup_xfail "m68hc1*-*-*" "m6811-*-*" "m6812-*-*"
+ setup_xfail "rx-*-*" "vax*-*-*" "xgate*-*-*" "z8k-*-*"
+ # rs6000-aix disallows redefinition via .comm.
+ setup_xfail "*-*-aix*"
+ # SOM uses a different syntax for .comm
+ setup_xfail "hppa*-*-hpux*"
+ # These targets fail redef3 because section contents for the
+ # word referencing the .comm sym is not zero and/or its reloc
+ # has a non-zero addend. Relaxing the test would hide real
+ # failures such as or32-elf.
+ setup_xfail "bfin-*-*" "i\[3-7\]86-*-*coff" \
+ "i\[3-7\]86-*-*pe" "i\[3-7\]86-*-go32*" \
+ "i\[3-7\]86-*-cygwin*" "i\[3-7\]86-*-mingw*" "x86_64-*-mingw*"
run_dump_test redef3
gas_test_error "redef4.s" "" ".set for symbol already used as label"
gas_test_error "redef5.s" "" ".set for symbol already defined through .comm"
![istarget *c54x*-*-*] } then {
# the vax fails because VMS can apparently actually handle this
# case in relocs, so gas doesn't handle it itself.
- # mn10300 emits two relocs to handle the difference of two symbols.
- setup_xfail "mn10300*-*-*" "vax*-*-vms*"
+ # msp430 and mn10300 emit two relocs to handle the difference of two symbols.
+ setup_xfail "mn10300*-*-*" "msp430*-*-*" "vax*-*-vms*"
do_930509a
}
run_dump_test assign
}
run_dump_test sleb128
+run_dump_test sleb128-2
+run_dump_test sleb128-3
+run_dump_test sleb128-4
+run_dump_test sleb128-5
+# .byte is not 8 bits on either tic4x or tic54x
+if { ![istarget "tic4x*-*-*"] && ![istarget "tic54x*-*-*"] } {
+ run_dump_test sleb128-7
+}
# .byte is 32 bits on tic4x, and .p2align isn't supported on tic54x
# .space is different on hppa*-hpux.