set file $srcdir/$subdir/$name
gas_run ${name}.s "$opts -o dump.o" ">&dump.out"
if { ![string match "" $opts]
- && [regexp_diff "dump.out" "${file}.l"] } then {
+ && [regexp_diff "dump.out" "${file}.l" ""] } then {
fail $testname
verbose "output is [file_contents "dump.out"]" 2
return
return
}
verbose_eval {[file_contents "dump.out"]} 3
- if { [regexp_diff "dump.out" "${file}.e${suffix}"] } then {
+ if { [regexp_diff "dump.out" "${file}.e${suffix}" ""] } then {
fail $testname
verbose "output is [file_contents "dump.out"]" 2
return
}
# We're testing bits in obj-elf -- don't run on anything else.
-if { ([istarget "*-*-*elf*"]
+if { ([istarget "*-*-*elf*"]
|| [istarget "*-*-linux*"]
|| [istarget "m6811-*"]
|| [istarget "m6812-*"]
if {[istarget "score-*-*"]} then {
set target_machine -score
}
- if {[istarget "xtensa-*-*"]} then {
+ if {[istarget "tic6x-*-*"]} then {
+ set target_machine -tic6x
+ }
+ if {[istarget "xtensa*-*-*"]} then {
set target_machine -xtensa
}
+ if {[istarget "rx-*-*"]} then {
+ set target_machine -rx
+ }
if { ([istarget "*arm*-*-*"]
|| [istarget "xscale*-*-*"]) } {
-
+
if { ([istarget "*-*-*eabi"]
|| [istarget "*-*-linux-*"]
|| [istarget "*-*-symbianelf"])} then {
# function prologues.
if {![istarget "mn10300-*-*"]
&& ![istarget "xtensa*-*-*"]
- && ![istarget "am3*-*-*"]} then {
+ && ![istarget "am3*-*-*"]} then {
run_dump_test "ehopt0"
}
- run_dump_test "group0a"
- run_dump_test "group0b"
- run_dump_test "group1a"
- run_dump_test "group1b"
+ case $target_triplet in {
+ { m68k-*-* m68[03]??-*-* } {
+ run_dump_test "file" { { as "--defsym m68k=1" } }
+ }
+ { mmix-*-* } {
+ run_dump_test "file" { { as "--defsym mmix=1" } }
+ }
+ { xtensa*-*-* } {
+ run_dump_test "file" { { as "--rename-section file.s=file.c" } }
+ }
+ default {
+ run_dump_test "file"
+ }
+ }
+ run_dump_test "group0a"
+ run_dump_test "group0b"
+ run_dump_test "group1a"
+ run_dump_test "group1b"
+ run_dump_test "groupautoa"
+ run_dump_test "groupautob"
case $target_triplet in {
{ alpha*-*-* } { }
+ { cr16*-*-* } { }
+ { crx*-*-* } { }
+ { h8300-*-* } { }
{ hppa*-*-* } { }
{ iq2000*-*-* } { }
{ mips*-*-* } { }
+ { mn10200-*-* } { }
+ { mn10300-*-* } { }
{ *c54x*-*-* } { }
+ { rx-*-* } { }
default {
# The next test can fail if the target does not convert fixups
# against ordinary symbols into relocations against section symbols.
# This is usually revealed by the error message:
# symbol `sym' required but not present
- setup_xfail "cr16-*-*" "h8300-*-*" "mn10300-*-*"
run_dump_test redef
run_dump_test equ-reloc
}
}
- run_dump_test "section0"
- run_dump_test "section1"
- run_elf_list_test "section2" "$target_machine" "-al" "-s" ""
- run_dump_test "section3"
+ run_dump_test "pseudo"
+ run_dump_test "section0"
+ run_dump_test "section1"
+ if {! [istarget "h8300-*-*"]} then {
+ # The h8300 port issues a warning message for
+ # new sections created without atrributes.
+ run_elf_list_test "section2" "$target_machine" "-al" "-s" ""
+ }
+ run_dump_test "section3"
run_dump_test "section4"
- run_elf_list_test "section5" "" "-al" "-SW" "| grep \" \\\\.test\\\[0-9\\\]\""
- run_dump_test "struct"
- run_dump_test "symver"
- run_elf_list_test "type" "" "" "-s" "| grep \"1 \\\[FONTC\\\]\""
- run_dump_test "section6"
- run_dump_test "section7"
+ if {! [istarget "h8300-*-*"]} then {
+ # The h8300 port issues a warning message for
+ # new sections created without atrributes.
+ run_elf_list_test "section5" "" "-al" "-SW" "| grep \" \\\\.test\\\[0-9\\\]\""
+ }
+ run_dump_test "struct"
+ if { ![istarget "alpha*-*-*"] } then {
+ # The alpha port uses .set for state, e.g. nomacro.
+ run_dump_test "symtab"
+ }
+ run_dump_test "symver"
+
+ # The MSP port sets the ELF header's OSABI field to ELFOSABI_STANDALONE.
+ # The non-eabi ARM ports sets it to ELFOSABI_ARM.
+ # So for these targets we cannot include an IFUNC symbol type
+ # in the symbol type test.
+ if { [istarget "msp*-*-*"]
+ || [istarget "arm*-*-*"]
+ || [istarget "xscale*-*-*"]} then {
+ run_elf_list_test "type-noifunc" "" "" "-s" "| grep \"1 *\\\[FONTC\\\]\""
+ } else {
+ run_dump_test ifunc-1
+ run_elf_list_test "type" "" "" "-s" "| grep \"1 *\\\[FIONTCU\\\]\""
+ }
+
+ run_dump_test "section6"
+ run_dump_test "section7"
+ run_dump_test "section8"
+ run_dump_test "dwarf2-1"
+ run_dump_test "dwarf2-2"
+ run_dump_test "dwarf2-3"
+ run_dump_test "bad-section-flag"
}