-# Copyright (C) 1993 Free Software Foundation, Inc.
+# Copyright (C) 1993-2015 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
# Please email any bugs, comments, and/or additions to this file to:
-# DejaGnu@cygnus.com
+# dejagnu@gnu.org
# Written by the Center for Software Science at the University of Utah
# and by Cygnus Support.
if [gas_test_old "blebug.s" "" "Proper relocation for BLE (part 1)"] then {
objdump_start_no_subdir "a.out" "-r"
- if ![istarget hppa*-*-*elf*] then {
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
# At one time both versions of the assembler would incorrectly use
# a PC-relative relocation for a BLE instruction.
while 1 {
expect {
- -re "^00000004\[^\n\]*ABS_CALL\[^\n\]*\n" { set x 1 }
+ -re "^0+\[^\n\]*DIR21L\[^\n\]*\n" { set x 1 }
+ -re "^0+4\[^\n\]*DIR17R\[^\n\]*\n" { set x 1 }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
eof { break }
# a PC-relative relocation for a BLE instruction.
while 1 {
expect {
- -re "^00000000\[^\n\]*DIR21L\[^\n\]*\n" { set x 1 }
- -re "^00000004\[^\n\]*DIR17R\[^\n\]*\n" { set x 1 }
+ -re "^0+4\[^\n\]*ABS_CALL\[^\n\]*\n" { set x 1 }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
eof { break }
set testname "reduce.s: Test relocation reductions (part 2)"
set x 0
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
+ }
+
if [gas_test_old "reduce.s" "" "Relocation reductions (part1)"] then {
objdump_start_no_subdir "a.out" "-r"
# Doing so makes generating parameter relocation stubs impossible.
while 1 {
expect {
- -re "^00000004\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
+ -re "^0+4\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000014\[^\n\]*PCREL\[^\n\]*foo\[^\n\]*\n"
+ -re "^0+14\[^\n\]*PCREL\[^\n\]*foo\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
set testname "reduce2.s: More relocation reduction tests (part 2)"
set x 0
- if [gas_test_old "reduce2.s" "" "More relocatoin reductions (part1)"] then {
+ if [gas_test_old "reduce2.s" "" "More relocation reductions (part1)"] then {
objdump_start_no_subdir "a.out" "-r"
# Check to make sure DLT relative relocs are not reduced to sym+addend
# Doing so doesn't work as one might expect
while 1 {
expect {
- -re "^00000004\[^\n\]*DLT\[^\n\]*L.C0000\[^\n\]*\n"
+ -re "^0+4\[^\n\]*DLT\[^\n\]*L.C0000\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^0000001c\[^\n\]*DLT\[^\n\]*L.C0000\[^\n\]*\n"
+ -re "^0+1c\[^\n\]*DLT\[^\n\]*L.C0000\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000030\[^\n\]*DLT\[^\n\]*L.C0001\[^\n\]*\n"
+ -re "^0+30\[^\n\]*DLT\[^\n\]*L.C0001\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000048\[^\n\]*DLT\[^\n\]*L.C0001\[^\n\]*\n"
+ -re "^0+48\[^\n\]*DLT\[^\n\]*L.C0001\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
# Doing so makes generating parameter relocation stubs impossible.
while 1 {
expect {
- -re "^0000000c\[^\n\]*yabba\[^\n\+\]*\n"
+ -re "^0+c\[^\n\]*yabba\[^\n\+\]*\n"
{ set x [expr $x+1] }
- -re "^0000000c\[^\n\]*yabba\+\[^\n\]*\n"
+ -re "^0+c\[^\n\]*yabba\+\[^\n\]*\n"
{ set x 0; break }
- -re "^00000010\[^\n\]*yabba\[^\n\+\]*\n"
+ -re "^0+10\[^\n\]*yabba\[^\n\+\]*\n"
{ set x [expr $x+1] }
- -re "^00000010\[^\n\]*yabba\+\[^\n\]*\n"
+ -re "^0+10\[^\n\]*yabba\+\[^\n\]*\n"
{ set x 0; break }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
# Check that we make PLABEL relocation entries when they're needed.
while 1 {
expect {
- -re "^00000000\[^\n\]*PLABEL\[^\n\]*\n"
+ -re "^0+\[^\n\]*PLABEL\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000004\[^\n\]*PLABEL\[^\n\]*\n"
+ -re "^0+4\[^\n\]*PLABEL\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
set testname "selectorbug.s: Test scope of field selector"
set x 0
+ if [istarget hppa*64*-*-*] then {
+ return
+ }
+
if [gas_test_old "selectorbug.s" "" "Test scope of field selector (part 1)"] {
objdump_start_no_subdir "a.out" "-r"
# Check to make sure the relocation entry after the plabel is correct.
# If an old field selector was incorrectly "carried" over, then
# this test will fail.
- if [istarget hppa*-*-*elf*] then {
+ if {[istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
while 1 {
expect {
- -re "^00000014\[^\n\]*DIR32\[^\n\]*\n"
+ -re "^0+14\[^\n\]*DIR32\[^\n\]*\n"
{ set x 1 }
- -re "^00000014\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
+ -re "^0+14\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
{ set x 0 }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
} else {
while 1 {
expect {
- -re "^00000014\[^\n\]*DATA_ONE\[^\n\]*\n"
+ -re "^0+14\[^\n\]*DATA_ONE\[^\n\]*\n"
{ set x 1 }
- -re "^00000014\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
+ -re "^0+14\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
{ set x 0 }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
if [gas_test_old "labelopbug.s" "" "Local label as operand (part 1)"] {
objdump_start_no_subdir "a.out" "-r"
- # Check to make sure we handle difference of local lables as an operand
- # to a non-branching instruction correctly.
- while 1 {
- expect {
- -re "^0000002c\[^\n\]*0x00000024\[^\n\]*\n"
- { set x [expr $x+1] }
- -re "^00000030\[^\n\]*0x00000024\[^\n\]*\n"
- { set x [expr $x+1] }
- -re "\[^\n\]*\n" { }
- timeout { perror "timeout\n"; break }
- eof { break }
- }
+ # Check to make sure we handle difference of local labels as an operand
+ # to a non-branching instruction correctly. On hppa elf targets, the
+ # R_PARISC_DIR21 and R_PARISC_DIR14R relocations are done with LR and
+ # RR selectors, respectively. As a result, we can't reduce these to
+ # section offsets without risking incorrect rounding. So, we just
+ # check to see if the label hasn't been reduced.
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ while 1 {
+ expect {
+ -re "^0+2c\[^\n\]*L.0002\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+30\[^\n\]*L.0002\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+ } else {
+ while 1 {
+ expect {
+ -re "^0+2c\[^\n\]*0x0+24\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+30\[^\n\]*0x0+24\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
}
# This was intended to do any cleanup necessary. It kinda looks like it
# Elf (osf) does not use ENTRY/EXIT relocations.
# I guess we could look at the unwind subspaces it builds...
# Until then, make sure it still assembles.
- if [istarget hppa*-*-*elf*] then {
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
gas_test_old "exitbug.s" "" "Test for bogus R_EXIT relocation (part 1)"
- return;
+ return
}
if [gas_test_old "exitbug.s" "" "Test for bogus R_EXIT relocation (part 1)"] {
# Note that a match here is really a FAILURE!
while 1 {
expect {
- -re "^00000000\[^\n\]*R_EXIT\[^\n\]*\n"
+ -re "^0+\[^\n\]*R_EXIT\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
set testname "fixupbug.s: Test cross space jump/call fixup bug (part 2)"
set x 0
- # ELF (osf) doesn't really handle extra sections too well...
- if [istarget hppa*-*-*elf*] then {
- return;
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
}
if [gas_test_old "fixupbug.s" "" "Test cross space jump/call fixup bug (part 1)"] {
# branch/call
while 1 {
expect {
- -re "^00000000\[^\n\]*PCREL_CALL\[^\n\]*\n"
+ -re "^0+\[^\n\]*PCREL_CALL\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
set testname "fixupbug.s: Test cross space jump/call fixup bug (part 3)"
set x 0
- # ELF (osf) doesn't really handle extra sections too well...
- if [istarget hppa*-*-*elf*] then {
- return;
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
}
gas_start "fixupbug.s" "-al"
# Make sure GAS generated correct relocations to switch rounding modes.
# Also make sure (for SOM) that redundant rounding mode relocations
# were eliminated.
- if [istarget hppa*-*-*elf*] then {
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
while 1 {
expect {
- -re "^00000000\[^\n\]*DIR21L\[^\n\]*\n"
+ -re "^0+\[^\n\]*DIR21L\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000004\[^\n\]*DIR14R\[^\n\]*\n"
+ -re "^0+4\[^\n\]*DIR14R\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000008\[^\n\]*DIR21L\[^\n\]*\n"
+ -re "^0+8\[^\n\]*DIR21L\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^0000000c\[^\n\]*DIR14R\[^\n\]*\n"
+ -re "^0+c\[^\n\]*DIR14R\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000010\[^\n\]*DIR21L\[^\n\]*\n"
+ -re "^0+10\[^\n\]*DIR21L\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000014\[^\n\]*DIR14R\[^\n\]*\n"
+ -re "^0+14\[^\n\]*DIR14R\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000018\[^\n\]*DIR21L\[^\n\]*\n"
+ -re "^0+18\[^\n\]*DIR21L\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^0000001c\[^\n\]*DIR14R\[^\n\]*\n"
+ -re "^0+1c\[^\n\]*DIR14R\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
} else {
while 1 {
expect {
- -re "^00000000\[^\n\]*R_R_MODE\[^\n\]*\n"
+ -re "^0+\[^\n\]*R_R_MODE\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000004\[^\n\]*R_R_MODE\[^\n\]*\n"
+ -re "^0+4\[^\n\]*R_R_MODE\[^\n\]*\n"
{ fail $testname }
- -re "^00000008\[^\n\]*R_N_MODE\[^\n\]*\n"
+ -re "^0+8\[^\n\]*R_N_MODE\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^0000000c\[^\n\]*R_N_MODE\[^\n\]*\n"
+ -re "^0+c\[^\n\]*R_N_MODE\[^\n\]*\n"
{ fail $testname }
- -re "^00000010\[^\n\]*R_R_MODE\[^\n\]*\n"
+ -re "^0+10\[^\n\]*R_R_MODE\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000014\[^\n\]*R_R_MODE\[^\n\]*\n"
+ -re "^0+14\[^\n\]*R_R_MODE\[^\n\]*\n"
{ fail $testname }
- -re "^0000001c\[^\n\]*R_R_MODE\[^\n\]*\n"
+ -re "^0+1c\[^\n\]*R_R_MODE\[^\n\]*\n"
{ fail $testname }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
objdump_finish
# Did we find what we were looking for? If not, flunk it.
- if [istarget hppa*-*-*elf*] then {
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
if [expr $x==8] then { pass $testname } else { fail $testname }
} else {
if [expr $x==3] then { pass $testname } else { fail $testname }
# branch/call
while 1 {
expect {
- -re "^000000cc\[^\n\]*f2___4\[^\n+\]*\n"
+ -re "^0+cc\[^\n\]*f2___4\[^\n+\]*\n"
{ set x [expr $x+1] }
- -re "^000000d0\[^\n\]*f2___4\[^\n+\]*\n"
+ -re "^0+d0\[^\n\]*f2___4\[^\n+\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
set testname "funcrelocbug.s: Test for reloc bug in non-plabel function reference (part3)"
set x 0
- objdump_start_no_subdir "a.out" "-d"
+ objdump_start_no_subdir "a.out" "--prefix-addresses -d"
# Make sure we didn't put anything in the instruction itself!
while 1 {
expect {
- -re "^000000cc\[^\n\]*ldil 0,r20\[^\n\]*\n"
+ -re "^0+cc\[^\n\]*ldil L%0,r20\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^000000d0\[^\n\]*ldo 0\[\(\]+r20\[\)\]+,r19\[^\n\]*\n"
+ -re "^0+d0\[^\n\]*ldo 0\[\(\]+r20\[\)\]+,r19\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
# Make sure GAS generated a correct relocation for the reference.
while 1 {
expect {
- -re "^000c0004\[^\n\]*PLABEL\[^\n]*g\[^\n\]*\n"
+ -re "^0+c0004\[^\n\]*PLABEL\[^\n]*g\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
set testname "picreloc.s: Test for proper PIC relocation (part 2)"
set x 0
- # ELF (osf) doesn't really handle extra sections too well...
- if [istarget hppa*-*-*elf*] then {
- return;
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
}
gas_start "picreloc.s" "-al"
# Did we find what we were looking for? If not, flunk it.
if [expr $x==1] then { pass $testname } else { fail $testname }
}
+
+proc do_apply_test {} {
+ set testname "applybug.s: Test for proper fixup application (part 2)"
+ set x 0
+
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
+ }
+
+ gas_start "applybug.s" "-al"
+
+ while 1 {
+ expect {
+ -re "^ +\[0-9\]+ 0000 00000044\[^\n\]*\n" { set x [expr $x+1] }
+ -re "^ +\[0-9\]+ 0004 00000058\[^\n\]*\n" { set x [expr $x+1] }
+ -re "^ +\[0-9\]+ 0008 0000006C\[^\n\]*\n" { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ gas_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==3] then { pass $testname } else { fail $testname }
+}
+
if [istarget hppa*-*-*] then {
# Make sure we put the right relocation entry on a BLE instruction.
do_ble_relocation_test
# Test a relocation problem which shows up when building shared
# libraries in SOM
do_pic_relocation_test
+
+ # Test a problem with md_apply_fix that was introduced when fixing
+ # the pic relocation test.
+ do_apply_test
+
+ # Make sure gas doesn't resolve long-calls which are to be fixed
+ # by the linker
+ gas_test "longcall.s" "" "" "Avoid resolving long-calls"
}
projects / deliverable / binutils-gdb.git / blobdiff