-# Copyright (C) 1993 Free Software Foundation, Inc.
+# Copyright 1993, 1996, 1997, 2002, 2004, 2005, 2007
+# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
# Please email any bugs, comments, and/or additions to this file to:
-# DejaGnu@cygnus.com
+# dejagnu@gnu.org
# Written by the Center for Software Science at the University of Utah
# and by Cygnus Support.
if [gas_test_old "blebug.s" "" "Proper relocation for BLE (part 1)"] then {
objdump_start_no_subdir "a.out" "-r"
- # At one time both versions of the assembler would incorrectly use
- # a PC-relative relocation for a BLE instruction.
- while 1 {
- expect {
- -re "^00000004\[^\n\]*ABS_CALL_R17\[^\n\]*\n" { set x 1 }
- -re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
- eof { break }
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ # At one time both versions of the assembler would incorrectly use
+ # a PC-relative relocation for a BLE instruction.
+ while 1 {
+ expect {
+ -re "^0+\[^\n\]*DIR21L\[^\n\]*\n" { set x 1 }
+ -re "^0+4\[^\n\]*DIR17R\[^\n\]*\n" { set x 1 }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
}
+ }
+ } else {
+ # At one time both versions of the assembler would incorrectly use
+ # a PC-relative relocation for a BLE instruction.
+ while 1 {
+ expect {
+ -re "^0+4\[^\n\]*ABS_CALL\[^\n\]*\n" { set x 1 }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
}
}
}
proc do_relocation_reduction_tests {} {
- set testname "relocreduce.s: Test relocation reductions (part 2)"
+ set testname "reduce.s: Test relocation reductions (part 2)"
set x 0
- if [gas_test_old "relocreduce.s" "" "Relocation reductions (part1)"] then {
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
+ }
+
+ if [gas_test_old "reduce.s" "" "Relocation reductions (part1)"] then {
objdump_start_no_subdir "a.out" "-r"
# Check to make sure relocations involving procedure labels
# Doing so makes generating parameter relocation stubs impossible.
while 1 {
expect {
- -re "^00000000\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
+ -re "^0+4\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+14\[^\n\]*PCREL\[^\n\]*foo\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^0000001c\[^\n\]*PCREL_CALL\[^\n\]*foo\[^\n\]*\n"
- { set x [4xpr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ objdump_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==2] then { pass $testname } else { fail $testname }
+
+ set testname "reduce2.s: More relocation reduction tests (part 2)"
+ set x 0
+
+ if [gas_test_old "reduce2.s" "" "More relocation reductions (part1)"] then {
+ objdump_start_no_subdir "a.out" "-r"
+
+ # Check to make sure DLT relative relocs are not reduced to sym+addend
+ # Doing so doesn't work as one might expect
+ while 1 {
+ expect {
+ -re "^0+4\[^\n\]*DLT\[^\n\]*L.C0000\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+1c\[^\n\]*DLT\[^\n\]*L.C0000\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+30\[^\n\]*DLT\[^\n\]*L.C0001\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+48\[^\n\]*DLT\[^\n\]*L.C0001\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ objdump_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==2] then { pass $testname } else { fail $testname }
+
+ set testname "reduce3.s: Test even more relocation reductions (part 2)"
+ set x 0
+
+ if [gas_test_old "reduce3.s" "" "Even more relocation reductions (part1)"] then {
+ objdump_start_no_subdir "a.out" "-r"
+
+ # Check to make sure relocations involving procedure labels
+ # are not reduced to a relocation involving some other symbol.
+ # Doing so makes generating parameter relocation stubs impossible.
+ while 1 {
+ expect {
+ -re "^0+c\[^\n\]*yabba\[^\n\+\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+c\[^\n\]*yabba\+\[^\n\]*\n"
+ { set x 0; break }
+ -re "^0+10\[^\n\]*yabba\[^\n\+\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+10\[^\n\]*yabba\+\[^\n\]*\n"
+ { set x 0; break }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
-re "^ +\[0-9\]+ 0000 20202801\[^\n\]*\n" { set x [expr $x+1] }
-re "^ +\[0-9\]+ 0004 E420E008\[^\n\]*\n" { set x [expr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
if [expr $x==2] then { pass $testname } else { fail $testname }
}
+proc do_ble_relocation_test {} {
+ set testname "blebug3.s: blebug3"
+ set x 0
+
+ gas_start "blebug3.s" "-al"
+
+ while 1 {
+ expect {
+ -re "^ +\[0-9\]+ 0000 E4002000\[^\n\]*\n" { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ gas_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==1] then { pass $testname } else { fail $testname }
+}
+
proc do_plabel_relocation_test {} {
set testname "plabelbug.s: Old gas-1.36 plabel bug (part 2)"
set x 0
# Check that we make PLABEL relocation entries when they're needed.
while 1 {
expect {
- -re "^00000000\[^\n\]*PLABEL\[^\n\]*\n" { set x [expr $x+1] }
- -re "^00000004\[^\n\]*PLABEL\[^\n\]*\n" { set x [expr $x+1] }
+ -re "^0+\[^\n\]*PLABEL\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+4\[^\n\]*PLABEL\[^\n\]*\n"
+ { set x [expr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
set testname "selectorbug.s: Test scope of field selector"
set x 0
+ if [istarget hppa*64*-*-*] then {
+ return
+ }
+
if [gas_test_old "selectorbug.s" "" "Test scope of field selector (part 1)"] {
objdump_start_no_subdir "a.out" "-r"
# Check to make sure the relocation entry after the plabel is correct.
# If an old field selector was incorrectly "carried" over, then
# this test will fail.
- if [istarget hppa*-*-osf] then {
+ if {[istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
while 1 {
expect {
- -re "^00000014\[^\n\]*HPPA_32\[^\n\]*\n"
+ -re "^0+14\[^\n\]*DIR32\[^\n\]*\n"
{ set x 1 }
- -re "^00000014\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
+ -re "^0+14\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
{ set x 0 }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
} else {
while 1 {
expect {
- -re "^00000014\[^\n\]*DATA_ONE\[^\n\]*\n"
+ -re "^0+14\[^\n\]*DATA_ONE\[^\n\]*\n"
{ set x 1 }
- -re "^00000014\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
+ -re "^0+14\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
{ set x 0 }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
if [gas_test_old "labelopbug.s" "" "Local label as operand (part 1)"] {
objdump_start_no_subdir "a.out" "-r"
- # Check to make sure we handle difference of local lables as an operand
- # to a non-branching instruction correctly.
+ # Check to make sure we handle difference of local labels as an operand
+ # to a non-branching instruction correctly. On hppa elf targets, the
+ # R_PARISC_DIR21 and R_PARISC_DIR14R relocations are done with LR and
+ # RR selectors, respectively. As a result, we can't reduce these to
+ # section offsets without risking incorrect rounding. So, we just
+ # check to see if the label hasn't been reduced.
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ while 1 {
+ expect {
+ -re "^0+2c\[^\n\]*L.0002\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+30\[^\n\]*L.0002\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+ } else {
+ while 1 {
+ expect {
+ -re "^0+2c\[^\n\]*0x0+24\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+30\[^\n\]*0x0+24\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ objdump_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==2] then { pass $testname } else { fail $testname }
+ }
+}
+
+proc do_exit_relocation_test {} {
+ set testname "exitbug.s: Test for bogus R_EXIT relocation (part 2)"
+ set x 0
+
+ # Elf (osf) does not use ENTRY/EXIT relocations.
+ # I guess we could look at the unwind subspaces it builds...
+ # Until then, make sure it still assembles.
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ gas_test_old "exitbug.s" "" "Test for bogus R_EXIT relocation (part 1)"
+ return
+ }
+
+ if [gas_test_old "exitbug.s" "" "Test for bogus R_EXIT relocation (part 1)"] {
+ objdump_start_no_subdir "a.out" "-r"
+
+ # Note that a match here is really a FAILURE!
while 1 {
expect {
- -re "^0000002c\[^\n\]*0x00000024\[^\n\]*\n"
+ -re "^0+\[^\n\]*R_EXIT\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000030\[^\n\]*0x00000024\[^\n\]*\n"
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ objdump_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==0] then { pass $testname } else { fail $testname }
+ }
+}
+
+proc do_cross_space_fixup_test_1 {} {
+ set testname "fixupbug.s: Test cross space jump/call fixup bug (part 2)"
+ set x 0
+
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
+ }
+
+ if [gas_test_old "fixupbug.s" "" "Test cross space jump/call fixup bug (part 1)"] {
+ objdump_start_no_subdir "a.out" "-r"
+
+ # Make sure GAS generated a fixup/relocation for the cross-space
+ # branch/call
+ while 1 {
+ expect {
+ -re "^0+\[^\n\]*PCREL_CALL\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
# isn't needed, but just in case, please keep it in for now.
objdump_finish
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==1] then { pass $testname } else { fail $testname }
+ }
+}
+
+proc do_cross_space_fixup_test_2 {} {
+ set testname "fixupbug.s: Test cross space jump/call fixup bug (part 3)"
+ set x 0
+
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
+ }
+
+ gas_start "fixupbug.s" "-al"
+
+ while 1 {
+ expect {
+ -re "^ +\[0-9\]+ 0000 E8000002\[^\n\]*\n" { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ gas_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==1] then { pass $testname } else { fail $testname }
+}
+
+proc do_round_mode_test {} {
+ set testname "roundmode.s: Test switching of rounding modes (part 2)"
+ set x 0
+
+ if [gas_test_old "roundmode.s" "" "Test switch of rounding modes(part 1)"] {
+ objdump_start_no_subdir "a.out" "-r"
+
+ # Make sure GAS generated correct relocations to switch rounding modes.
+ # Also make sure (for SOM) that redundant rounding mode relocations
+ # were eliminated.
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ while 1 {
+ expect {
+ -re "^0+\[^\n\]*DIR21L\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+4\[^\n\]*DIR14R\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+8\[^\n\]*DIR21L\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+c\[^\n\]*DIR14R\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+10\[^\n\]*DIR21L\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+14\[^\n\]*DIR14R\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+18\[^\n\]*DIR21L\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+1c\[^\n\]*DIR14R\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+ } else {
+ while 1 {
+ expect {
+ -re "^0+\[^\n\]*R_R_MODE\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+4\[^\n\]*R_R_MODE\[^\n\]*\n"
+ { fail $testname }
+ -re "^0+8\[^\n\]*R_N_MODE\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+c\[^\n\]*R_N_MODE\[^\n\]*\n"
+ { fail $testname }
+ -re "^0+10\[^\n\]*R_R_MODE\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+14\[^\n\]*R_R_MODE\[^\n\]*\n"
+ { fail $testname }
+ -re "^0+1c\[^\n\]*R_R_MODE\[^\n\]*\n"
+ { fail $testname }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ objdump_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ if [expr $x==8] then { pass $testname } else { fail $testname }
+ } else {
+ if [expr $x==3] then { pass $testname } else { fail $testname }
+ }
+ }
+}
+
+proc do_function_reloc_bug {} {
+ set testname "funcrelocbug.s: Test for reloc bug in non-plabel function reference (part 2)"
+ set x 0
+
+ if [gas_test_old "funcrelocbug.s" "" "Test for reloc bug in non-plabel function reference (part 1)"] {
+ objdump_start_no_subdir "a.out" "-r"
+
+ # Make sure GAS generated a correct relocation for the reference.
+ # branch/call
+ while 1 {
+ expect {
+ -re "^0+cc\[^\n\]*f2___4\[^\n+\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+d0\[^\n\]*f2___4\[^\n+\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ objdump_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==2] then { pass $testname } else { fail $testname }
+
+ set testname "funcrelocbug.s: Test for reloc bug in non-plabel function reference (part3)"
+ set x 0
+
+ objdump_start_no_subdir "a.out" "--prefix-addresses -d"
+ # Make sure we didn't put anything in the instruction itself!
+ while 1 {
+ expect {
+ -re "^0+cc\[^\n\]*ldil L%0,r20\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+d0\[^\n\]*ldo 0\[\(\]+r20\[\)\]+,r19\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ objdump_finish
+
# Did we find what we were looking for? If not, flunk it.
if [expr $x==2] then { pass $testname } else { fail $testname }
}
+
+}
+
+proc do_r_no_reloc {} {
+ set testname "r_no_reloc.s: Test for reloc bug in 4-byte R_NO_RELCOATION fixups (part 2)"
+ set x 0
+
+ if [gas_test_old "r_no_reloc.s" "" "Test for reloc bug in 4-byte R_NO_RELOCATION fixups (part 1)"] {
+ objdump_start_no_subdir "a.out" "-r"
+
+ # Make sure GAS generated a correct relocation for the reference.
+ while 1 {
+ expect {
+ -re "^0+c0004\[^\n\]*PLABEL\[^\n]*g\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ objdump_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==1] then { pass $testname } else { fail $testname }
+
+ }
+}
+
+proc do_pic_relocation_test {} {
+ set testname "picreloc.s: Test for proper PIC relocation (part 2)"
+ set x 0
+
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
+ }
+
+ gas_start "picreloc.s" "-al"
+
+ while 1 {
+ expect {
+ -re "^ +\[0-9\]+ 0000 00000004\[^\n\]*\n" { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ gas_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==1] then { pass $testname } else { fail $testname }
+}
+
+proc do_apply_test {} {
+ set testname "applybug.s: Test for proper fixup application (part 2)"
+ set x 0
+
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
+ }
+
+ gas_start "applybug.s" "-al"
+
+ while 1 {
+ expect {
+ -re "^ +\[0-9\]+ 0000 00000044\[^\n\]*\n" { set x [expr $x+1] }
+ -re "^ +\[0-9\]+ 0004 00000058\[^\n\]*\n" { set x [expr $x+1] }
+ -re "^ +\[0-9\]+ 0008 0000006C\[^\n\]*\n" { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ gas_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==3] then { pass $testname } else { fail $testname }
}
if [istarget hppa*-*-*] then {
do_relocation_reduction_tests
# Check that mode selectors on a ble instruction actually work.
- setup_xfail hppa*-*-*
do_ble_mode_selector_test
+ # Check that we take the -8 adjustment into account when zeroing
+ # out the displacement field in a ble instruction with a reloc
+ do_ble_relocation_test
+
# 1.36 simply didn't generate all the plabels it should have. Make
# sure gas-2 does.
do_plabel_relocation_test
# easier on the optimizing linker. Until then just make sure the
# difference is computed correctly.
do_local_label_as_operand_test
+
+ # GAS2 incorrectly generated R_EXIT relocations when .exit directives
+ # were not in the source code.
+ do_exit_relocation_test
+
+ # GAS2 incorrectly thought it could apply a fixup for a pc-relative
+ # branch/call which crossed different subspaces.
+ # Also check that the assembled instruction is correct
+ do_cross_space_fixup_test_1
+ do_cross_space_fixup_test_2
+
+ # Make sure we switch rounding modes correctly
+ do_round_mode_test
+
+ # Test for a bug found when a function was used in a non-branching
+ # instruction *without* a plabel (for portable runtime model)
+ do_function_reloc_bug
+
+ # Test for an off-by-one bug in the handling of 4-byte R_NO_RELOCATION
+ # fixups.
+ do_r_no_reloc
+
+ # Test a relocation problem which shows up when building shared
+ # libraries in SOM
+ do_pic_relocation_test
+
+ # Test a problem with md_apply_fix that was introduced when fixing
+ # the pic relocation test.
+ do_apply_test
+
+ # Make sure gas doesn't resolve long-calls which are to be fixed
+ # by the linker
+ gas_test "longcall.s" "" "" "Avoid resolving long-calls"
}
projects / deliverable / binutils-gdb.git / blobdiff