-# Copyright (C) 1993, 1996, 1997 Free Software Foundation, Inc.
+# Copyright 1993, 1996, 1997, 2002, 2004, 2005, 2007
+# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
# Please email any bugs, comments, and/or additions to this file to:
-# DejaGnu@cygnus.com
+# dejagnu@gnu.org
# Written by the Center for Software Science at the University of Utah
# and by Cygnus Support.
if [gas_test_old "blebug.s" "" "Proper relocation for BLE (part 1)"] then {
objdump_start_no_subdir "a.out" "-r"
- if ![istarget hppa*-*-*elf*] then {
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
# At one time both versions of the assembler would incorrectly use
# a PC-relative relocation for a BLE instruction.
while 1 {
expect {
- -re "^0+4\[^\n\]*ABS_CALL\[^\n\]*\n" { set x 1 }
+ -re "^0+\[^\n\]*DIR21L\[^\n\]*\n" { set x 1 }
+ -re "^0+4\[^\n\]*DIR17R\[^\n\]*\n" { set x 1 }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
eof { break }
# a PC-relative relocation for a BLE instruction.
while 1 {
expect {
- -re "^0+\[^\n\]*DIR21L\[^\n\]*\n" { set x 1 }
- -re "^0+4\[^\n\]*DIR17R\[^\n\]*\n" { set x 1 }
+ -re "^0+4\[^\n\]*ABS_CALL\[^\n\]*\n" { set x 1 }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
eof { break }
set testname "reduce.s: Test relocation reductions (part 2)"
set x 0
- if [istarget hppa*w-*-*] then {
- return;
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
}
if [gas_test_old "reduce.s" "" "Relocation reductions (part1)"] then {
set testname "selectorbug.s: Test scope of field selector"
set x 0
- if [istarget hppa*w-*-*] then {
- return;
+ if [istarget hppa*64*-*-*] then {
+ return
}
if [gas_test_old "selectorbug.s" "" "Test scope of field selector (part 1)"] {
# Check to make sure the relocation entry after the plabel is correct.
# If an old field selector was incorrectly "carried" over, then
# this test will fail.
- if [istarget hppa*-*-*elf*] then {
+ if {[istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
while 1 {
expect {
-re "^0+14\[^\n\]*DIR32\[^\n\]*\n"
if [gas_test_old "labelopbug.s" "" "Local label as operand (part 1)"] {
objdump_start_no_subdir "a.out" "-r"
- # Check to make sure we handle difference of local lables as an operand
- # to a non-branching instruction correctly.
- while 1 {
- expect {
- -re "^0+2c\[^\n\]*0x0+24\[^\n\]*\n"
- { set x [expr $x+1] }
- -re "^0+30\[^\n\]*0x0+24\[^\n\]*\n"
- { set x [expr $x+1] }
- -re "\[^\n\]*\n" { }
- timeout { perror "timeout\n"; break }
- eof { break }
- }
+ # Check to make sure we handle difference of local labels as an operand
+ # to a non-branching instruction correctly. On hppa elf targets, the
+ # R_PARISC_DIR21 and R_PARISC_DIR14R relocations are done with LR and
+ # RR selectors, respectively. As a result, we can't reduce these to
+ # section offsets without risking incorrect rounding. So, we just
+ # check to see if the label hasn't been reduced.
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ while 1 {
+ expect {
+ -re "^0+2c\[^\n\]*L.0002\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+30\[^\n\]*L.0002\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+ } else {
+ while 1 {
+ expect {
+ -re "^0+2c\[^\n\]*0x0+24\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^0+30\[^\n\]*0x0+24\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
}
# This was intended to do any cleanup necessary. It kinda looks like it
# Elf (osf) does not use ENTRY/EXIT relocations.
# I guess we could look at the unwind subspaces it builds...
# Until then, make sure it still assembles.
- if [istarget hppa*-*-*elf*] then {
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
gas_test_old "exitbug.s" "" "Test for bogus R_EXIT relocation (part 1)"
- return;
+ return
}
if [gas_test_old "exitbug.s" "" "Test for bogus R_EXIT relocation (part 1)"] {
set testname "fixupbug.s: Test cross space jump/call fixup bug (part 2)"
set x 0
- if [istarget hppa*w-*-*] then {
- return;
- }
-
- # ELF (osf) doesn't really handle extra sections too well...
- if [istarget hppa*-*-*elf*] then {
- return;
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
}
if [gas_test_old "fixupbug.s" "" "Test cross space jump/call fixup bug (part 1)"] {
set testname "fixupbug.s: Test cross space jump/call fixup bug (part 3)"
set x 0
- if [istarget hppa*w-*-*] then {
- return;
- }
-
- # ELF (osf) doesn't really handle extra sections too well...
- if [istarget hppa*-*-*elf*] then {
- return;
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
}
gas_start "fixupbug.s" "-al"
# Make sure GAS generated correct relocations to switch rounding modes.
# Also make sure (for SOM) that redundant rounding mode relocations
# were eliminated.
- if { [istarget hppa*-*-*elf*] || [istarget hppa*w-*-*] } then {
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
while 1 {
expect {
-re "^0+\[^\n\]*DIR21L\[^\n\]*\n"
objdump_finish
# Did we find what we were looking for? If not, flunk it.
- if {[istarget hppa*-*-*elf*] || [istarget hppa*w-*-*] } then {
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
if [expr $x==8] then { pass $testname } else { fail $testname }
} else {
if [expr $x==3] then { pass $testname } else { fail $testname }
# Make sure we didn't put anything in the instruction itself!
while 1 {
expect {
- -re "^0+cc\[^\n\]*ldil 0,r20\[^\n\]*\n"
+ -re "^0+cc\[^\n\]*ldil L%0,r20\[^\n\]*\n"
{ set x [expr $x+1] }
-re "^0+d0\[^\n\]*ldo 0\[\(\]+r20\[\)\]+,r19\[^\n\]*\n"
{ set x [expr $x+1] }
set testname "picreloc.s: Test for proper PIC relocation (part 2)"
set x 0
- if [istarget hppa*w-*-*] then {
- return;
- }
-
- # ELF (osf) doesn't really handle extra sections too well...
- if [istarget hppa*-*-*elf*] then {
- return;
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
}
gas_start "picreloc.s" "-al"
}
proc do_apply_test {} {
- set testname "applybug.s: Test for proper fixup appliation (part 2)"
+ set testname "applybug.s: Test for proper fixup application (part 2)"
set x 0
- # ELF (osf) doesn't really handle extra sections too well...
- if [istarget hppa*-*-*elf*] then {
- return;
+ # ELF doesn't really handle extra sections too well...
+ if {[istarget hppa*64*-*-*]
+ || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then {
+ return
}
gas_start "applybug.s" "-al"
while 1 {
expect {
- -re "^ +\[0-9\]+ 0000 00000000\[^\n\]*\n" { set x [expr $x+1] }
- -re "^ +\[0-9\]+ 0004 00000000\[^\n\]*\n" { set x [expr $x+1] }
- -re "^ +\[0-9\]+ 0008 00000000\[^\n\]*\n" { set x [expr $x+1] }
+ -re "^ +\[0-9\]+ 0000 00000044\[^\n\]*\n" { set x [expr $x+1] }
+ -re "^ +\[0-9\]+ 0004 00000058\[^\n\]*\n" { set x [expr $x+1] }
+ -re "^ +\[0-9\]+ 0008 0000006C\[^\n\]*\n" { set x [expr $x+1] }
-re "\[^\n\]*\n" { }
timeout { perror "timeout\n"; break }
eof { break }
# Did we find what we were looking for? If not, flunk it.
if [expr $x==3] then { pass $testname } else { fail $testname }
}
+
if [istarget hppa*-*-*] then {
# Make sure we put the right relocation entry on a BLE instruction.
do_ble_relocation_test