#
# i386 tests
#
-proc run_list_test { name opts } {
- global srcdir subdir
- set testname "i386 $name"
- set file $srcdir/$subdir/$name
- gas_run ${name}.s $opts ">&dump.out"
- if { [regexp_diff "dump.out" "${file}.l"] } then {
- fail $testname
- verbose "output is [file_contents "dump.out"]" 2
- return
- }
- pass $testname
-}
-
proc gas_64_check { } {
global NM
global NMFLAGS
return [regexp "targets:.*i386" $nm_help]
}
-
if [expr ([istarget "i*86-*-*"] || [istarget "x86_64-*-*"]) && [gas_32_check]] then {
global ASFLAGS
run_list_test "float" "-al"
run_list_test "general" "-al --listing-lhs-width=2"
run_list_test "inval" "-al"
+ run_list_test "segment" "-al"
+ run_list_test "inval-seg" "-al"
run_list_test "modrm" "-al --listing-lhs-width=2"
run_dump_test "naked"
run_dump_test "opcode"
+ run_dump_test "opcode-intel"
+ run_dump_test "opcode-suffix"
run_dump_test "intel"
run_dump_test "intel16"
+ run_list_test "intelbad" ""
+ run_dump_test "intelok"
run_dump_test "prefix"
run_dump_test "amd"
run_dump_test "katmai"
run_dump_test "jump"
run_dump_test "ssemmx2"
run_dump_test "sse2"
- run_dump_test "absrel"
run_dump_test "sub"
run_dump_test "prescott"
+ run_dump_test "sib"
+ run_dump_test "vmx"
+ run_dump_test "suffix"
+ run_dump_test "immed32"
+ run_dump_test "equ"
run_dump_test "divide"
run_dump_test "padlock"
+ run_dump_test "crx"
+ run_list_test "cr-err" ""
+ run_dump_test "svme"
+ run_dump_test "amdfam10"
+ run_dump_test "merom"
+ run_dump_test "rep"
+ run_dump_test "rep-suffix"
+ run_dump_test "fp"
+ run_dump_test "nops"
+ run_dump_test "nops-1"
+ run_dump_test "nops-1-i386"
+ run_dump_test "nops-1-i686"
+ run_dump_test "nops-1-merom"
+ run_dump_test "nops-2"
+ run_dump_test "nops-2-i386"
+ run_dump_test "nops-2-merom"
+ run_dump_test "nops-3"
+ run_dump_test "addr16"
+ run_dump_test "addr32"
+ run_dump_test "sse4_1"
+ run_dump_test "sse4_2"
+ run_dump_test "crc32"
+ run_dump_test "crc32-intel"
+ run_list_test "inval-crc32" "-al"
+ run_dump_test "simd"
+ run_dump_test "simd-intel"
# These tests require support for 8 and 16 bit relocs,
# so we only run them for ELF and COFF targets.
run_dump_test "reloc"
run_dump_test "jump16"
run_list_test "white" "-al --listing-lhs-width=3"
+
+ # These tests should in theory work for PE targets as well,
+ # but the relocs we currently produce are slightly different
+ # from those produced for ELF/COFF based toolchains.
+ # So for now we ignore PE targets.
+ run_dump_test "pcrel"
+ run_dump_test "absrel"
}
# ELF specific tests
run_dump_test "tlsd"
run_dump_test "tlspic"
run_dump_test "tlsnopic"
- run_dump_test "pcrel"
+ run_dump_test "bss"
+ run_dump_test "reloc32"
+ run_list_test "reloc32" "--defsym _bad_=1"
+ run_dump_test "mixed-mode-reloc32"
}
# This is a PE specific test.
run_dump_test "x86_64"
run_dump_test "x86-64-addr32"
+ run_dump_test "x86-64-addr32-intel"
run_dump_test "x86-64-opcode"
+ run_dump_test "x86-64-pcrel"
run_dump_test "x86-64-rip"
+ run_dump_test "x86-64-rip-intel"
+ run_dump_test "x86-64-stack"
+ run_dump_test "x86-64-stack-intel"
+ run_dump_test "x86-64-stack-suffix"
run_list_test "x86-64-inval" "-al"
+ run_list_test "x86-64-segment" "-al"
+ run_list_test "x86-64-inval-seg" "-al"
+ run_dump_test "x86-64-branch"
+ run_dump_test "svme64"
+ run_dump_test "x86-64-amdfam10"
+ run_dump_test "x86-64-vmx"
+ run_dump_test "immed64"
+ run_dump_test "x86-64-prescott"
+ run_dump_test "x86-64-crx"
+ run_dump_test "x86-64-crx-suffix"
+ run_dump_test "x86-64-drx"
+ run_dump_test "x86-64-drx-suffix"
+ run_dump_test "x86-64-merom"
+ run_dump_test "x86-64-rep"
+ run_dump_test "x86-64-rep-suffix"
+ run_dump_test "x86-64-cbw"
+ run_dump_test "x86-64-cbw-intel"
+ run_dump_test "x86-64-io"
+ run_dump_test "x86-64-io-intel"
+ run_dump_test "x86-64-io-suffix"
+ run_dump_test "x86-64-gidt"
+ run_dump_test "x86-64-nops"
+ if ![istarget "x86_64-*-mingw*"] then {
+ run_dump_test "x86-64-nops-1"
+ }
+ run_dump_test "x86-64-nops-1-k8"
+ run_dump_test "x86-64-nops-1-nocona"
+ run_dump_test "x86-64-nops-1-merom"
+ run_dump_test "x86-64-sse4_1"
+ run_dump_test "x86-64-sse4_2"
+ run_dump_test "x86-64-crc32"
+ run_dump_test "x86-64-crc32-intel"
+ run_list_test "x86-64-inval-crc32" "-al"
+ run_dump_test "x86-64-simd"
+ run_dump_test "x86-64-simd-intel"
+
+ if { ![istarget "*-*-aix*"]
+ && ![istarget "*-*-beos*"]
+ && ![istarget "*-*-*bsd*"]
+ && ![istarget "*-*-chaos*"]
+ && ![istarget "*-*-kaos*"]
+ && ![istarget "*-*-lynx*"]
+ && ![istarget "*-*-moss*"]
+ && ![istarget "*-*-nto-qnx*"]
+ && ![istarget "*-*-rtems*"]
+ && ![istarget "*-*-sco*"]
+ && ![istarget "*-*-solaris*"]
+ && ![istarget "*-*-sysv*"] } then {
+ run_dump_test "rex"
+ }
+
+ # For ELF targets verify that @unwind works.
+ if { ([istarget "*-*-elf*"] || [istarget "*-*-linux*"]
+ || [istarget "*-*-solaris2.*"])
+ && ![istarget *-*-linux*aout*]
+ && ![istarget *-*-linux*oldld*] } then {
+ run_dump_test "x86-64-unwind"
+ }
+
+ # ELF specific tests
+ if [is_elf_format] then {
+ run_dump_test "reloc64"
+ run_list_test "reloc64" "--defsym _bad_=1"
+ run_dump_test "mixed-mode-reloc64"
+ }
set ASFLAGS "$old_ASFLAGS"
}
projects / deliverable / binutils-gdb.git / blobdiff