#
# Some generic MIPS tests
#
-if [istarget mips*-*-*] then {
- set no_mips16 0
- set svr4pic [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] ]
- set empic [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
- set aout [expr [istarget *-*-bsd*] || [istarget *-*-netbsd*] || [istarget *-*-openbsd*]]
- set ilocks [istarget mipstx39*-*-*]
- set gpr_ilocks [expr [istarget mipstx39*-*-*]]
- set addr32 [expr [istarget mipstx39*-*-*]]
+# When adding a new test to this file, try to do the following things:
+#
+# * If testing assembly and disassembly of code, don't forget to test
+# the actual bit encodings of the instructions (using the
+# --show-raw-insn flag to objdump).
+#
+# * Try to run the test for as many architectures as appropriate,
+# using the "run_dump_test_arches" or "run_list_test_arches" functions,
+# along with the output from a call to "mips_arch_list_matching."
+#
+# * Be sure to compare the test output before and after your testsuite
+# changes, to verify that existing and new tests were run as expected.
+# Look for expect ERROR messages in the testsuite .log file to make sure
+# the new expect code did not contain errors.
+
+# To add support for a new CPU to this file, add an appropriate entry
+# to the sequence of "mips_arch_create" function calls below, and test
+# the result. The new CPU should automatically be used when running
+# various tests. If the new CPU is the default CPU for any tool
+# targets, make sure the call to "mips_arch_create" reflects that fact.
+
+
+# "LOSE" marks information about tests which fail at a particular point
+# in time, but which are not XFAILed. Either they used to pass
+# and indicate either regressions or the need to tweak the tests to keep
+# up the with code, or they are new tests and it is unknown whether or not
+# they should pass as-is for the given object formats.
+
+
+# The functions below create and manipulate an "architecture data
+# array" which contains entries for each MIPS architecture (or CPU)
+# known to these tests. The array contains the following information
+# for each architecture, indexed by the name of the architecture
+# described by the entry:
+#
+# displayname: The name of the entry to be used for pretty-printing.
+#
+# gprsize: The size in bits of General Purpose Registers provided by
+# the architecture (must be 32 or 64).
+#
+# props: A list of text strings which are associated with the
+# architecture. These include the architecture name as well as
+# information about what instructions the CPU supports. When matching
+# based on properties, an additional property is added to the normal
+# property list, "gpr<gprsize>" so that tests can match CPUs which
+# have GPRs of a specific size. The following properties are most
+# useful when matching properties for generic (i.e., not CPU-specific)
+# tests:
+#
+# mips1, mips2, mips3, mips4, mips5, mips32, mips64
+# The architecture includes the instructions defined
+# by that MIPS ISA.
+#
+# gpr_ilocks
+# The architecture interlocks GPRs accesses. (That is,
+# there are no load delay slots.)
+#
+# mips3d The architecture includes the MIPS-3D ASE.
+#
+# ror The architecture includes hardware rotate instructions.
+#
+# gpr32, gpr64
+# The architecture provides 32- or 64-bit General Purpose
+# Registers.
+#
+# as_flags: The assembler flags used when assembling tests for this
+# architecture.
+#
+# objdump_flags: The objdump flags used when disassembling tests for
+# this architecture.
+#
+# Most entries in the architecture array will have values in all of
+# the fields above. One entry, "default" represents the default CPU
+# based on the target of the assembler being built. If always has
+# empty "as_flags" and "objdump_flags."
+
+# mips_arch_init
+#
+# This function initializes the architecture data array ("mips_arches")
+# to be empty.
+proc mips_arch_init {} {
+ global mips_arches
+
+ # Catch becuase the variable won't be set the first time through.
+ catch {unset mips_arches}
+}
+
+# mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
+# (optional:) DEFAULT_FOR_TARGETS
+#
+# This function creates a new entry in the architecture data array,
+# for the architecture or CPU named ARCH, and fills in the entry
+# according to the rest of the arguments.
+#
+# The new entry's property list is initialized to contain ARCH, any
+# properties specified by PROPS, and the properties associated with
+# the entry specified by EXTENDS. (The new architecture is considered
+# to extend the capabilities provided by that architecture.)
+#
+# If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
+# this architecture is the default architecture. If "istarget" returns
+# true for any of the targets in the list, a "default" entry will be
+# added to the architecture array which indicates that ARCH is the default
+# architecture.
+proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
+ {default_for_targets {}}} {
+ global mips_arches
+
+ if { [info exists mips_arches($arch)] } {
+ error "mips_arch_create: arch \"$arch\" already exists"
+ }
+ if { $gprsize != 32 && $gprsize != 64 } {
+ error "mips_arch_create: invalid GPR size $gprsize"
+ }
+
+ set archdata(displayname) $arch
+ set archdata(gprsize) $gprsize
+ set archdata(as_flags) $as_flags
+ set archdata(objdump_flags) $objdump_flags
+ set archdata(props) $arch
+ eval lappend archdata(props) $props
+ if { [string length $extends] != 0 } {
+ eval lappend archdata(props) [mips_arch_properties $extends 0]
+ }
+
+ set mips_arches($arch) [array get archdata]
+
+ # Set as default if appropriate.
+ foreach target $default_for_targets {
+ if { [istarget $target] } {
+ if { [info exists mips_arches(default)] } {
+ error "mips_arch_create: default arch already exists"
+ }
+
+ set archdata(displayname) "default = $arch"
+ set archdata(as_flags) ""
+ set archdata(objdump_flags) ""
+
+ set mips_arches(default) [array get archdata]
+ break
+ }
+ }
+}
+
+# mips_arch_list_all
+#
+# This function returns the list of all names of entries in the
+# architecture data array (including the default entry, if a default
+# is known).
+proc mips_arch_list_all {} {
+ global mips_arches
+ return [lsort -dictionary [array names mips_arches]]
+}
+
+# mips_arch_data ARCH
+#
+# This function returns the information associated with ARCH
+# in the architecture data array, in "array get" form.
+proc mips_arch_data {arch} {
+ global mips_arches
+
+ if { ! [info exists mips_arches($arch)] } {
+ error "mips_arch_data: unknown arch \"$arch\""
+ }
+ return $mips_arches($arch)
+}
+
+# mips_arch_displayname ARCH
+#
+# This function returns the printable name associated with ARCH in
+# the architecture data array.
+proc mips_arch_displayname {arch} {
+ array set archdata [mips_arch_data $arch]
+ return $archdata(displayname)
+}
+
+# mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
+#
+# This function returns the property list associated with ARCH in the
+# architecture data array. If INCLUDE_GPRSIZE is non-zero, an additional
+# "gpr32" or "gpr64" property will be returned as part of the list based
+# on the architecture's GPR size.
+proc mips_arch_properties {arch {include_gprsize 1}} {
+ array set archdata [mips_arch_data $arch]
+ set props $archdata(props)
+ if { $include_gprsize } {
+ lappend props gpr$archdata(gprsize)
+ }
+ return $props
+}
+
+# mips_arch_as_flags ARCH
+#
+# This function returns the assembler flags associated with ARCH in
+# the architecture data array.
+proc mips_arch_as_flags {arch} {
+ array set archdata [mips_arch_data $arch]
+ return $archdata(as_flags)
+}
+
+# mips_arch_objdump_flags ARCH
+#
+# This function returns the objdump disassembly flags associated with
+# ARCH in the architecture data array.
+proc mips_arch_objdump_flags {arch} {
+ array set archdata [mips_arch_data $arch]
+ return $archdata(objdump_flags)
+}
+
+# mips_arch_matches ARCH PROPMATCHLIST
+#
+# This function returns non-zero if ARCH matches the set of properties
+# described by PROPMATCHLIST. Each entry in PROPMATCHLIST can either
+# be the name of a property which must be matched, or "!" followed by
+# the name of a property which must not be matched. ARCH matches
+# PROPMATCHLIST if and only if all of the conditions specified by
+# PROPMATCHLIST are satisfied.
+proc mips_arch_matches {arch propmatchlist} {
+ foreach pm $propmatchlist {
+ if { [string match {!*} $pm] } {
+ # fail if present.
+ set inverted 1
+ set p [string range $pm 1 end]
+ } {
+ # fail if not present.
+ set inverted 0
+ set p $pm
+ }
+
+ set loc [lsearch -exact [mips_arch_properties $arch] $p]
+
+ # required-absent and found, or required-present and not found: fail.
+ if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
+ return 0
+ }
+ }
+ return 1
+}
+
+# mips_arch_list_matching ARGS
+#
+# This function returns a list of all architectures which match
+# the conditions described by its arguments. Its arguments are
+# taken as a list and used as the PROPMATCHLIST in a call to
+# "mips_arch_matches" for each known architecture.
+proc mips_arch_list_matching {args} {
+ set l ""
+ foreach arch [mips_arch_list_all] {
+ # For now, don't match default arch until we know what its
+ # properties actually are.
+ if { [string compare $arch default] == 0
+ && [string length [mips_arch_properties default]] == 0} {
+ continue;
+ }
+ if { [mips_arch_matches $arch $args] } {
+ lappend l $arch
+ }
+ }
+ return $l
+}
+
+
+# The functions below facilitate running various types of tests.
+
+# run_dump_test_arch NAME ARCH
+#
+# Invoke "run_dump_test" for test NAME, with extra assembler and
+# disassembler flags to test architecture ARCH.
+proc run_dump_test_arch { name arch } {
+ global subdir
+
+ if [catch {run_dump_test $name \
+ "{name {([mips_arch_displayname $arch])}}
+ {objdump {[mips_arch_objdump_flags $arch]}}
+ {as {[mips_arch_as_flags $arch]}}"} rv] {
+ perror "$rv"
+ untested "$subdir/$name ($arch)"
+ }
+}
+
+# run_dump_test_arches NAME ARCH_LIST
+#
+# Invoke "run_dump_test_arch" for test NAME, for each architecture
+# listed in ARCH_LIST.
+proc run_dump_test_arches { name arch_list } {
+ foreach arch $arch_list {
+ run_dump_test_arch "$name" "$arch"
+ }
+}
+
+# run_list_test NAME OPTS (optional): TESTNAME
+#
+# Assemble the file "NAME.d" and compare the assembler standard error
+# output against the regular expressions given in the file "NAME.l".
+# The assembler is passed the flags given in OPTS. If TESTNAME is
+# provided, it will be used as the name of the test.
+proc run_list_test { name opts {testname {}} } {
+ global srcdir subdir
+ if { [string length $testname] == 0 } then {
+ set testname "MIPS $name"
+ }
+ set file $srcdir/$subdir/$name
+ gas_run ${name}.s $opts ">&dump.out"
+ if { [regexp_diff "dump.out" "${file}.l"] } then {
+ fail $testname
+ verbose "output is [file_contents "dump.out"]" 2
+ return
+ }
+ pass $testname
+}
+
+# run_list_test_arch NAME OPTS ARCH
+#
+# Invoke "run_list_test" for test NAME with options OPTS, with extra
+# assembler flags to test architecture ARCH.
+proc run_list_test_arch { name opts arch } {
+ global subdir
+
+ set testname "MIPS $name ([mips_arch_displayname $arch])"
+ if [catch {run_list_test "$name" "$opts [mips_arch_as_flags $arch]" \
+ "$testname"} rv] {
+ perror "$rv"
+ untested "$testname"
+ }
+}
+
+# run_list_test_arches NAME OPTS ARCH_LIST
+#
+# Invoke "run_list_test_arch" for test NAME with options OPTS, for each
+# architecture listed in ARCH_LIST.
+proc run_list_test_arches { name opts arch_list } {
+ foreach arch $arch_list {
+ run_list_test_arch "$name" "$opts" "$arch"
+ }
+}
+
+
+# Create the architecture data array by providing data for all
+# known architectures.
+#
+# Note that several targets pick default CPU based on ABI. We
+# can't easily handle that; do NOT list those targets as defaulting
+# to any architecture.
+mips_arch_init
+mips_arch_create mips1 32 {} {} \
+ { -march=mips1 -mtune=mips1 } { -mmips:3000 }
+mips_arch_create mips2 32 mips1 { gpr_ilocks } \
+ { -march=mips2 -mtune=mips2 } { -mmips:6000 }
+mips_arch_create mips3 64 mips2 {} \
+ { -march=mips3 -mtune=mips3 } { -mmips:4000 }
+mips_arch_create mips4 64 mips3 {} \
+ { -march=mips4 -mtune=mips4 } { -mmips:8000 }
+mips_arch_create mips5 64 mips4 {} \
+ { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
+mips_arch_create mips32 32 mips2 {} \
+ { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
+ { mipsisa32-*-* mipsisa32el-*-* }
+mips_arch_create mips32r2 32 mips32 { ror } \
+ { -march=mips32r2 -mtune=mips32r2 } \
+ { -mmips:isa32r2 } \
+ { mipsisa32r2-*-* mipsisa32r2el-*-* }
+mips_arch_create mips64 64 mips5 { mips32 } \
+ { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
+ { mipsisa64-*-* mipsisa64el-*-* }
+mips_arch_create mips64r2 64 mips64 { mips32r2 ror } \
+ { -march=mips64r2 -mtune=mips64r2 } \
+ { -mmips:isa64r2 } \
+ { mipsisa64r2-*-* mipsisa64r2el-*-* }
+mips_arch_create r3000 32 mips1 {} \
+ { -march=r3000 -mtune=r3000 } { -mmips:3000 }
+mips_arch_create r3900 32 mips1 { gpr_ilocks } \
+ { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
+ { mipstx39-*-* mipstx39el-*-* }
+mips_arch_create r4000 64 mips3 {} \
+ { -march=r4000 -mtune=r4000 } { -mmips:4000 }
+mips_arch_create vr5400 64 mips4 { ror } \
+ { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
+mips_arch_create sb1 64 mips64 { mips3d } \
+ { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
+ { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
+#
+# And now begin the actual tests!
+#
+if { [istarget mips*-*-*] } then {
+ set no_mips16 0
+ set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
+ set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
+ set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
+ set ilocks [istarget mipstx39*-*-*]
+ set gpr_ilocks [expr [istarget mipstx39*-*-*]]
+ set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*]]
+ set has_newabi [expr [istarget *-*-irix6*] || [istarget mips64*-*-linux*]]
- run_dump_test "abs"
- run_dump_test "add"
- run_dump_test "and"
+ if { [istarget "mips*-*-*linux*"] } then {
+ set tmips "t"
+ } else {
+ set tmips ""
+ }
+ if [istarget mips*el-*-*] {
+ set el "el"
+ } {
+ set el ""
+ }
+
+ run_dump_test_arches "abs" [mips_arch_list_matching mips1]
+ run_dump_test_arches "add" [mips_arch_list_matching mips1]
+ run_dump_test_arches "and" [mips_arch_list_matching mips1]
run_dump_test "break20"
run_dump_test "trap20"
- run_dump_test "beq"
- run_dump_test "bge"
- run_dump_test "bgeu"
- run_dump_test "blt"
- run_dump_test "bltu"
- if !$ilocks { run_dump_test "div" } else { run_dump_test "div-ilocks" }
- run_dump_test "dli"
- run_dump_test "jal"
- if $svr4pic { run_dump_test "jal-svr4pic" }
- if $svr4pic { run_dump_test "jal-xgot" }
- if $empic { run_dump_test "jal-empic" }
+
+ # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
+ # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
+ # more information. Not sure if the fixes there are correct; should
+ # branches to external labels be allowed for ECOFF?
+ # XXX FIXME: the following tests require -mips2 disasm for
+ # branch-likely instructions. They should be split.
+ run_dump_test_arches "beq" [mips_arch_list_matching mips2]
+ run_dump_test_arches "bge" [mips_arch_list_matching mips2]
+ run_dump_test_arches "bgeu" [mips_arch_list_matching mips2]
+ run_dump_test_arches "blt" [mips_arch_list_matching mips2]
+ run_dump_test_arches "bltu" [mips_arch_list_matching mips2]
+ run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
+ run_list_test_arches "branch-misc-2" "-32 -non_shared" [mips_arch_list_matching mips1]
+ run_list_test_arches "branch-misc-2pic" "-32 -call_shared" [mips_arch_list_matching mips1]
+
+ if $ilocks {
+ run_dump_test "div-ilocks"
+ } else {
+ run_dump_test "div"
+ }
+ if { !$addr32 } {
+ run_dump_test_arches "dli" [mips_arch_list_matching mips3]
+ }
+ if $elf {
+ run_dump_test_arches "elf-jal" [mips_arch_list_matching mips1]
+ } else {
+ run_dump_test "jal"
+ }
+ if $elf { run_dump_test "jal-svr4pic" }
+ if $elf { run_dump_test "jal-xgot" }
+ # LOSE: As of 2002-02-08, the jal-empic test fails for target mips-ecoff.
+ # It appears that it broke between 2000-03-11 00:00UTC and
+ # 2000-03-12 00:00 UTC.
+ if $ecoff { run_dump_test "jal-empic" }
+ if $elf {
+ run_dump_test_arches "jal-empic-elf" [mips_arch_list_matching mips1]
+ run_dump_test_arches "jal-empic-elf-2" [mips_arch_list_matching mips1]
+ run_dump_test_arches "jal-empic-elf-3" [mips_arch_list_matching mips1]
+ }
+ run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
+ if $has_newabi { run_dump_test "jal-newabi" }
if !$aout { run_dump_test "la" }
- if $svr4pic { run_dump_test "la-svr4pic" }
- if $svr4pic { run_dump_test "la-xgot" }
- if $empic { run_dump_test "la-empic" }
- if !$aout { run_dump_test "lb" }
- if $svr4pic { run_dump_test "lb-svr4pic" }
- if $svr4pic {
+ if $elf { run_dump_test "la-svr4pic" }
+ if $elf { run_dump_test "la-xgot" }
+ # LOSE: As of 2002-02-08, the la-empic test fails for target mips-ecoff.
+ # Not sure when it first cropped up, but may be related to addition of
+ # "la" -> "addiu" pattern in MIPS opcode table long ago.
+ if $ecoff { run_dump_test "la-empic" }
+ if !$aout {
+ # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
+ # (Should split and then use appropriate arch lists.)
+ run_dump_test_arches "lb" [mips_arch_list_matching !mips2]
+ }
+ if $elf {
+ run_dump_test_arches "lb-svr4pic" [mips_arch_list_matching mips1]
+ }
+ if $elf {
# Both versions specify the cpu, so we can run both regardless of
# the interlocking in the configured default cpu.
run_dump_test "lb-xgot"
run_dump_test "lb-xgot-ilocks"
}
- if $empic { run_dump_test "lb-empic" }
- if !$aout {
- if !$gpr_ilocks {
- run_dump_test "ld"
+ if $ecoff { run_dump_test "lb-empic" }
+ if !$aout {
+ if !$gpr_ilocks {
+ run_dump_test "ld"
} else {
if !$addr32 {
run_dump_test "ld-ilocks"
}
}
}
- if $svr4pic { run_dump_test "ld-svr4pic" }
- if $svr4pic { run_dump_test "ld-xgot" }
- if $empic { run_dump_test "ld-empic" }
- run_dump_test "li"
+ if $elf { run_dump_test "ld-svr4pic" }
+ if $elf { run_dump_test "ld-xgot" }
+ if $ecoff { run_dump_test "ld-empic" }
+ run_dump_test_arches "li" [mips_arch_list_matching mips1]
if !$aout { run_dump_test "lifloat" }
- if $svr4pic { run_dump_test "lif-svr4pic" }
- if $svr4pic { run_dump_test "lif-xgot" }
- if $empic { run_dump_test "lif-empic" }
- run_dump_test "mips4"
- if !$ilocks { run_dump_test "mul" } else { run_dump_test "mul-ilocks" }
- run_dump_test "rol"
+ if $elf { run_dump_test "lif-svr4pic" }
+ if $elf { run_dump_test "lif-xgot" }
+ # LOSE: As of 2002-02-08, the lif-empic test fails for target mips-ecoff.
+ # It appears that it broke between 2000-03-11 00:00UTC and
+ # 2000-03-12 00:00 UTC.
+ if $ecoff { run_dump_test "lif-empic" }
+ run_dump_test_arches "mips4" [mips_arch_list_matching mips4]
+ run_dump_test_arches "mips5" [mips_arch_list_matching mips5]
+ if $ilocks {
+ run_dump_test "mul-ilocks"
+ } else {
+ run_dump_test "mul"
+ }
+
+ run_dump_test_arches "rol" [mips_arch_list_matching !ror]
+ run_dump_test_arches "rol-hw" [mips_arch_list_matching ror]
+
+ run_dump_test_arches "rol64" [mips_arch_list_matching gpr64 !ror]
+ run_dump_test_arches "rol64-hw" [mips_arch_list_matching gpr64 ror]
+
if !$aout { run_dump_test "sb" }
run_dump_test "trunc"
if !$aout { run_dump_test "ulh" }
- if $svr4pic { run_dump_test "ulh-svr4pic" }
- if $svr4pic { run_dump_test "ulh-xgot" }
- if $empic { run_dump_test "ulh-empic" }
+ run_dump_test_arches "ulh2-eb" [mips_arch_list_matching mips1]
+ run_dump_test_arches "ulh2-el" [mips_arch_list_matching mips1]
+ if $elf { run_dump_test "ulh-svr4pic" }
+ if $elf { run_dump_test "ulh-xgot" }
+ if $ecoff { run_dump_test "ulh-empic" }
if !$aout {
run_dump_test "ulw"
run_dump_test "uld"
run_dump_test "usw"
run_dump_test "usd"
}
+ run_dump_test_arches "ulw2-eb" [mips_arch_list_matching !gpr_ilocks]
+ run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
+ run_dump_test_arches "ulw2-el" [mips_arch_list_matching !gpr_ilocks]
+ run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
+
+ run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
+ run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
+
# The mips16 test can only be run on ELF, because only ELF
# supports the necessary mips16 reloc.
- if { $svr4pic && !$no_mips16 } { run_dump_test "mips16" }
+ if { $elf && !$no_mips16 } {
+ run_dump_test "mips16"
+ # Check jalx handling
+ run_dump_test "mips16-jalx"
+ run_dump_test "mips-jalx"
+ }
+ run_list_test "mips-no-jalx" "-32"
run_dump_test "delay"
run_dump_test "nodelay"
run_dump_test "mips4010"
run_dump_test "mips4650"
run_dump_test "mips4100"
+ run_dump_test "vr4111"
+ run_dump_test "vr4120"
+ run_dump_test "vr4122"
+ run_dump_test "vr5400"
+ run_dump_test "vr5500"
+ run_dump_test "rm7000"
+ run_dump_test "perfcount"
run_dump_test "lineno"
run_dump_test "sync"
- # Make sure that -mcpu=FOO and -mFOO are equivalent. Assemble a file
- # containing 4650-specific instructions with -m4650 and -mcpu=4650,
- # and verify that they're the same. Specifically, we're checking
- # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
- # instruction does get used. In previous versions of GAS,
- # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
- run_dump_test "elf_e_flags1"
- run_dump_test "elf_e_flags2"
- run_dump_test "elf_e_flags3"
- run_dump_test "elf_e_flags4"
+ run_dump_test_arches "mips32" [mips_arch_list_matching mips32]
+
+ run_dump_test_arches "mips32r2" [mips_arch_list_matching mips32r2]
+ run_list_test_arches "mips32r2-ill" "-32" \
+ [mips_arch_list_matching mips32r2 gpr32]
+ run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
+ [mips_arch_list_matching mips32r2 gpr64]
+
+ run_dump_test_arches "mips64" [mips_arch_list_matching mips64]
+
+ run_dump_test_arches "mips64r2" [mips_arch_list_matching mips64r2]
+ run_list_test_arches "mips64r2-ill" "" [mips_arch_list_matching mips64r2]
+
+ run_dump_test "set-arch"
+
+ if { !$addr32 } {
+ run_dump_test "mips64-mips3d"
+ run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
+
+ run_dump_test "mips64-mdmx"
+ run_dump_test "sb1-ext-mdmx"
+ run_dump_test "sb1-ext-ps"
+ }
+
+ run_dump_test "relax"
+
+ run_list_test "illegal" "-32"
+ run_list_test "baddata1" "-32"
+
+ # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
+ # It's unknown whether they _should_ pass as-is, or whether different
+ # variants are needed for ELF and ECOFF.
+ run_dump_test "mips-gp32-fp32"
+ run_dump_test "mips-gp32-fp64"
+ run_dump_test "mips-gp64-fp32"
+ run_dump_test "mips-gp64-fp64"
+
+ if $elf {
+ # Make sure that -mcpu=FOO and -mFOO are equivalent. Assemble a file
+ # containing 4650-specific instructions with -m4650 and -mcpu=4650,
+ # and verify that they're the same. Specifically, we're checking
+ # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
+ # instruction does get used. In previous versions of GAS,
+ # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
+ run_dump_test "elf_e_flags1"
+ run_dump_test "elf_e_flags2"
+ run_dump_test "elf_e_flags3"
+ run_dump_test "elf_e_flags4"
+
+ # Check EF_MIPS_ARCH markings for each supported architecture.
+ run_dump_test "elf_arch_mips1"
+ run_dump_test "elf_arch_mips2"
+ run_dump_test "elf_arch_mips3"
+ run_dump_test "elf_arch_mips4"
+ run_dump_test "elf_arch_mips5"
+ run_dump_test "elf_arch_mips32"
+ run_dump_test "elf_arch_mips32r2"
+ run_dump_test "elf_arch_mips64"
+ run_dump_test "elf_arch_mips64r2"
+
+ # Verify that ASE markings are handled properly.
+ if { !$no_mips16 } { run_dump_test "elf_ase_mips16" }
+
+ run_dump_test "mips-gp32-fp32-pic"
+ run_dump_test "mips-gp32-fp64-pic"
+ run_dump_test "mips-gp64-fp32-pic"
+ run_dump_test "mips-gp64-fp64-pic"
+
+ run_dump_test "mips-abi32"
+ run_dump_test "mips-abi32-pic"
+ run_dump_test "mips-abi32-pic2"
+
+ run_dump_test "elf${el}-rel"
+ if {[istarget mips64*-*-*] || [istarget mipsisa32*-*-*]
+ || [istarget mipsisa64*-*-*]} {
+ run_dump_test "elf${el}-rel2"
+ } else {
+ run_dump_test "e32${el}-rel2"
+ }
+ run_dump_test "elf${el}-rel3"
+ if {[istarget mips64*-*-*]} {
+ run_dump_test "elf-rel4"
+ } else {
+ run_dump_test "e32-rel4"
+ }
+ run_dump_test "elf-rel5"
+ run_dump_test "elf-rel6"
+ run_dump_test "elf-rel7"
+ run_dump_test "elf-rel8"
+ run_dump_test "elf-rel9"
+ if $has_newabi {
+ run_dump_test "elf-rel10"
+ run_dump_test "elf-rel11"
+ }
+ run_dump_test "elf-rel12"
+ run_dump_test "elf-rel13"
+ run_dump_test "elf-rel14"
+
+ if $has_newabi {
+ run_dump_test "elf-rel15"
+
+ run_dump_test "elf-rel-got-n32"
+ run_dump_test "elf-rel-xgot-n32"
+ run_dump_test "elf-rel-got-n64"
+ run_dump_test "elf-rel-xgot-n64"
+ }
+
+ run_dump_test "${tmips}${el}empic"
+ run_dump_test "empic2"
+ run_dump_test "empic3_e"
+ run_dump_test "empic3_g1"
+ run_dump_test "empic3_g2"
+ if { !$no_mips16 } {
+ run_dump_test "${tmips}mips${el}16-e"
+ run_dump_test "${tmips}mips${el}16-f"
+ }
+ run_dump_test "elf-consthilo"
+ run_dump_test "expr1"
+ }
+
+ if $has_newabi {
+ run_dump_test "n32-consec"
+ }
+
+ # tests of objdump's ability to disassemble using different
+ # register names.
+ run_dump_test "gpr-names-numeric"
+ run_dump_test "gpr-names-32"
+ run_dump_test "gpr-names-n32"
+ run_dump_test "gpr-names-64"
+
+ run_dump_test "fpr-names-numeric"
+ run_dump_test "fpr-names-32"
+ run_dump_test "fpr-names-n32"
+ run_dump_test "fpr-names-64"
+
+ run_dump_test "cp0-names-numeric"
+ run_dump_test "cp0-names-mips32"
+ run_dump_test "cp0-names-mips32r2"
+ run_dump_test "cp0-names-mips64"
+ run_dump_test "cp0-names-mips64r2"
+ run_dump_test "cp0-names-sb1"
+
+ run_dump_test "cp0sel-names-numeric"
+ run_dump_test "cp0sel-names-mips32"
+ run_dump_test "cp0sel-names-mips32r2"
+ run_dump_test "cp0sel-names-mips64"
+ run_dump_test "cp0sel-names-mips64r2"
+ run_dump_test "cp0sel-names-sb1"
+
+ run_dump_test "hwr-names-numeric"
+ run_dump_test "hwr-names-mips32r2"
+ run_dump_test "hwr-names-mips64r2"
}
projects / deliverable / binutils-gdb.git / blobdiff