/* write.c - emit .o file
Copyright 1986, 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 1998, 1999, 2000, 2001
+ 1998, 1999, 2000, 2001, 2002
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
#include "output-file.h"
#include "dwarf2dbg.h"
-/* This looks like a good idea. Let's try turning it on always, for now. */
-#undef BFD_FAST_SECTION_FILL
-#define BFD_FAST_SECTION_FILL
-
#ifndef TC_ADJUST_RELOC_COUNT
-#define TC_ADJUST_RELOC_COUNT(FIXP,COUNT)
+#define TC_ADJUST_RELOC_COUNT(FIX, COUNT)
#endif
#ifndef TC_FORCE_RELOCATION
-#define TC_FORCE_RELOCATION(FIXP) 0
+#define TC_FORCE_RELOCATION(FIX) \
+ (S_FORCE_RELOC ((FIX)->fx_addsy))
+#endif
+
+#ifndef TC_FORCE_RELOCATION_ABS
+#define TC_FORCE_RELOCATION_ABS(FIX) \
+ (TC_FORCE_RELOCATION (FIX))
+#endif
+
+#ifndef TC_FORCE_RELOCATION_LOCAL
+#define TC_FORCE_RELOCATION_LOCAL(FIX) \
+ (!(FIX)->fx_pcrel \
+ || (FIX)->fx_plt \
+ || TC_FORCE_RELOCATION (FIX))
+#endif
+
+#ifndef TC_FORCE_RELOCATION_SUB_SAME
+#define TC_FORCE_RELOCATION_SUB_SAME(FIX, SEG) \
+ (! SEG_NORMAL (SEG))
+#endif
+
+#ifndef TC_FORCE_RELOCATION_SUB_ABS
+#define TC_FORCE_RELOCATION_SUB_ABS(FIX) 0
+#endif
+
+#ifndef TC_FORCE_RELOCATION_SUB_LOCAL
+#ifdef DIFF_EXPR_OK
+#define TC_FORCE_RELOCATION_SUB_LOCAL(FIX) 0
+#else
+#define TC_FORCE_RELOCATION_SUB_LOCAL(FIX) 1
+#endif
#endif
-#ifndef TC_FORCE_RELOCATION_SECTION
-#define TC_FORCE_RELOCATION_SECTION(FIXP,SEG) TC_FORCE_RELOCATION(FIXP)
+#ifndef TC_VALIDATE_FIX_SUB
+#ifdef UNDEFINED_DIFFERENCE_OK
+/* The PA needs this for PIC code generation. */
+#define TC_VALIDATE_FIX_SUB(FIX) 1
+#else
+#ifdef BFD_ASSEMBLER
+#define TC_VALIDATE_FIX_SUB(FIX) \
+ ((FIX)->fx_r_type == BFD_RELOC_GPREL32 \
+ || (FIX)->fx_r_type == BFD_RELOC_GPREL16)
+#else
+#define TC_VALIDATE_FIX_SUB(FIX) 0
+#endif
+#endif
#endif
#ifndef TC_LINKRELAX_FIXUP
#define TC_LINKRELAX_FIXUP(SEG) 1
#endif
-#ifndef TC_FIX_ADJUSTABLE
-#define TC_FIX_ADJUSTABLE(fix) 1
+#ifndef MD_APPLY_SYM_VALUE
+#define MD_APPLY_SYM_VALUE(FIX) 1
#endif
#ifndef TC_FINALIZE_SYMS_BEFORE_SIZE_SEG
#endif
#ifndef MD_PCREL_FROM_SECTION
-#define MD_PCREL_FROM_SECTION(FIXP, SEC) md_pcrel_from(FIXP)
+#define MD_PCREL_FROM_SECTION(FIX, SEC) md_pcrel_from (FIX)
#endif
#ifndef WORKING_DOT_WORD
-extern CONST int md_short_jump_size;
-extern CONST int md_long_jump_size;
+extern const int md_short_jump_size;
+extern const int md_long_jump_size;
#endif
/* Used to control final evaluation of expressions. */
int finalize_syms = 0;
int symbol_table_frozen;
+
+symbolS *abs_section_sym;
+
+/* Remember the value of dot when parsing expressions. */
+addressT dot_value;
+
void print_fixup PARAMS ((fixS *));
#ifdef BFD_ASSEMBLER
static int n_fixups;
#ifdef BFD_ASSEMBLER
-static fixS *fix_new_internal PARAMS ((fragS *, int where, int size,
- symbolS *add, symbolS *sub,
- offsetT offset, int pcrel,
- bfd_reloc_code_real_type r_type));
+#define RELOC_ENUM enum bfd_reloc_code_real
#else
+#define RELOC_ENUM int
+#endif
+
static fixS *fix_new_internal PARAMS ((fragS *, int where, int size,
symbolS *add, symbolS *sub,
offsetT offset, int pcrel,
- int r_type));
-#endif
+ RELOC_ENUM r_type));
#if defined (BFD_ASSEMBLER) || (!defined (BFD) && !defined (OBJ_VMS))
-static long fixup_segment PARAMS ((fixS * fixP, segT this_segment_type));
+static long fixup_segment PARAMS ((fixS *, segT));
#endif
static relax_addressT relax_align PARAMS ((relax_addressT addr, int align));
#if defined (BFD_ASSEMBLER) || ! defined (BFD)
static void chain_frchains_together PARAMS ((bfd *, segT, PTR));
static void cvt_frag_to_fill PARAMS ((segT, fragS *));
static void adjust_reloc_syms PARAMS ((bfd *, asection *, PTR));
+static void fix_segment PARAMS ((bfd *, asection *, PTR));
static void write_relocs PARAMS ((bfd *, asection *, PTR));
static void write_contents PARAMS ((bfd *, asection *, PTR));
static void set_symtab PARAMS ((void));
static void remove_subsegs PARAMS ((frchainS *, int, fragS **, fragS **));
static void relax_and_size_all_segments PARAMS ((void));
#endif
-#if defined (BFD_ASSEMBLER) && defined (OBJ_COFF) && defined (TE_GO32)
-static void set_segment_vma PARAMS ((bfd *, asection *, PTR));
-#endif
/* Create a fixS in obstack 'notes'. */
symbolS *sub_symbol; /* X_op_symbol. */
offsetT offset; /* X_add_number. */
int pcrel; /* TRUE if PC-relative relocation. */
-#ifdef BFD_ASSEMBLER
- bfd_reloc_code_real_type r_type; /* Relocation type. */
-#else
- int r_type; /* Relocation type. */
-#endif
+ RELOC_ENUM r_type ATTRIBUTE_UNUSED; /* Relocation type. */
{
fixS *fixP;
fixP->fx_addsy = add_symbol;
fixP->fx_subsy = sub_symbol;
fixP->fx_offset = offset;
+ fixP->fx_dot_value = dot_value;
fixP->fx_pcrel = pcrel;
fixP->fx_plt = 0;
#if defined(NEED_FX_R_TYPE) || defined (BFD_ASSEMBLER)
symbolS *add_symbol; /* X_add_symbol. */
offsetT offset; /* X_add_number. */
int pcrel; /* TRUE if PC-relative relocation. */
-#ifdef BFD_ASSEMBLER
- bfd_reloc_code_real_type r_type; /* Relocation type. */
-#else
- int r_type; /* Relocation type. */
-#endif
+ RELOC_ENUM r_type; /* Relocation type. */
{
return fix_new_internal (frag, where, size, add_symbol,
(symbolS *) NULL, offset, pcrel, r_type);
int size; /* 1, 2, or 4 usually. */
expressionS *exp; /* Expression. */
int pcrel; /* TRUE if PC-relative relocation. */
-#ifdef BFD_ASSEMBLER
- bfd_reloc_code_real_type r_type; /* Relocation type. */
-#else
- int r_type; /* Relocation type. */
-#endif
+ RELOC_ENUM r_type; /* Relocation type. */
{
symbolS *add = NULL;
symbolS *sub = NULL;
else
flags &= ~SEC_RELOC;
x = bfd_set_section_flags (abfd, sec, flags);
- assert (x == true);
+ assert (x);
newsize = md_section_align (sec, size);
x = bfd_set_section_size (abfd, sec, newsize);
- assert (x == true);
+ assert (x);
/* If the size had to be rounded up, add some padding in the last
non-empty frag. */
while (fragp->fr_next != last)
fragp = fragp->fr_next;
last->fr_address = size;
- fragp->fr_offset += newsize - size;
+ if ((newsize - size) % fragp->fr_var == 0)
+ fragp->fr_offset += (newsize - size) / fragp->fr_var;
+ else
+ /* If we hit this abort, it's likely due to subsegs_finish not
+ providing sufficient alignment on the last frag, and the
+ machine dependent code using alignment frags with fr_var
+ greater than 1. */
+ abort ();
}
#ifdef tc_frob_section
#define EMIT_SECTION_SYMBOLS 1
#endif
+/* This pass over fixups decides whether symbols can be replaced with
+ section symbols. */
+
static void
adjust_reloc_syms (abfd, sec, xxx)
bfd *abfd ATTRIBUTE_UNUSED;
point. It is possible to see unresolved expression
symbols, though, since they are not in the regular symbol
table. */
- if (sym != NULL)
- resolve_symbol_value (sym);
+ resolve_symbol_value (sym);
if (fixp->fx_subsy != NULL)
resolve_symbol_value (fixp->fx_subsy);
/* If this symbol is equated to an undefined symbol, convert
the fixup to being against that symbol. */
- if (sym != NULL && symbol_equated_reloc_p (sym))
+ if (symbol_equated_reloc_p (sym))
{
fixp->fx_offset += symbol_get_value_expression (sym)->X_add_number;
sym = symbol_get_value_expression (sym)->X_add_symbol;
fixp->fx_addsy = sym;
}
- if (sym != NULL && symbol_mri_common_p (sym))
+ if (symbol_mri_common_p (sym))
{
/* These symbols are handled specially in fixup_segment. */
- goto done;
+ continue;
}
- symsec = S_GET_SEGMENT (sym);
+ /* If the symbol is undefined, common, weak, or global (ELF
+ shared libs), we can't replace it with the section symbol. */
+ if (S_FORCE_RELOC (fixp->fx_addsy))
+ continue;
+ /* Is there some other (target cpu dependent) reason we can't adjust
+ this one? (E.g. relocations involving function addresses on
+ the PA. */
+#ifdef tc_fix_adjustable
+ if (! tc_fix_adjustable (fixp))
+ continue;
+#endif
+
+ /* Since we're reducing to section symbols, don't attempt to reduce
+ anything that's already using one. */
+ if (symbol_section_p (sym))
+ continue;
+
+ symsec = S_GET_SEGMENT (sym);
if (symsec == NULL)
abort ();
if (bfd_is_abs_section (symsec))
{
- /* The fixup_segment routine will not use this symbol in a
- relocation unless TC_FORCE_RELOCATION returns 1. */
- if (TC_FORCE_RELOCATION (fixp))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
-#ifdef UNDEFINED_DIFFERENCE_OK
- if (fixp->fx_subsy != NULL)
- symbol_mark_used_in_reloc (fixp->fx_subsy);
-#endif
- }
- goto done;
- }
-
- /* If it's one of these sections, assume the symbol is
- definitely going to be output. The code in
- md_estimate_size_before_relax in tc-mips.c uses this test
- as well, so if you change this code you should look at that
- code. */
- if (bfd_is_und_section (symsec)
- || bfd_is_com_section (symsec))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
-#ifdef UNDEFINED_DIFFERENCE_OK
- /* We have the difference of an undefined symbol and some
- other symbol. Make sure to mark the other symbol as used
- in a relocation so that it will always be output. */
- if (fixp->fx_subsy)
- symbol_mark_used_in_reloc (fixp->fx_subsy);
-#endif
- goto done;
+ /* The fixup_segment routine normally will not use this
+ symbol in a relocation. */
+ continue;
}
/* Don't try to reduce relocs which refer to non-local symbols
this will always be correct. */
if (symsec != sec && ! S_IS_LOCAL (sym))
{
- boolean linkonce;
-
- linkonce = false;
-#ifdef BFD_ASSEMBLER
- if ((bfd_get_section_flags (stdoutput, symsec) & SEC_LINK_ONCE)
- != 0)
- linkonce = true;
-#endif
-#ifdef OBJ_ELF
- /* The GNU toolchain uses an extension for ELF: a section
- beginning with the magic string .gnu.linkonce is a
- linkonce section. */
- if (strncmp (segment_name (symsec), ".gnu.linkonce",
- sizeof ".gnu.linkonce" - 1) == 0)
- linkonce = true;
-#endif
-
- if (linkonce)
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
-#ifdef UNDEFINED_DIFFERENCE_OK
- if (fixp->fx_subsy != NULL)
- symbol_mark_used_in_reloc (fixp->fx_subsy);
-#endif
- goto done;
- }
- }
-
- /* Since we're reducing to section symbols, don't attempt to reduce
- anything that's already using one. */
- if (symbol_section_p (sym))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-
-#ifdef BFD_ASSEMBLER
- /* We can never adjust a reloc against a weak symbol. If we
- did, and the weak symbol was overridden by a real symbol
- somewhere else, then our relocation would be pointing at
- the wrong area of memory. */
- if (S_IS_WEAK (sym))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
+ if ((symsec->flags & SEC_LINK_ONCE) != 0
+ || (IS_ELF
+ /* The GNU toolchain uses an extension for ELF: a
+ section beginning with the magic string
+ .gnu.linkonce is a linkonce section. */
+ && strncmp (segment_name (symsec), ".gnu.linkonce",
+ sizeof ".gnu.linkonce" - 1) == 0))
+ continue;
}
/* Never adjust a reloc against local symbol in a merge section
with non-zero addend. */
- if ((symsec->flags & SEC_MERGE) && fixp->fx_offset)
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-#endif
-
- /* Is there some other reason we can't adjust this one? (E.g.,
- call/bal links in i960-bout symbols.) */
-#ifdef obj_fix_adjustable
- if (! obj_fix_adjustable (fixp))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-#endif
-
- /* Is there some other (target cpu dependent) reason we can't adjust
- this one? (E.g. relocations involving function addresses on
- the PA. */
-#ifdef tc_fix_adjustable
- if (! tc_fix_adjustable (fixp))
- {
- symbol_mark_used_in_reloc (fixp->fx_addsy);
- goto done;
- }
-#endif
+ if ((symsec->flags & SEC_MERGE) != 0
+ && (fixp->fx_offset != 0 || fixp->fx_subsy != NULL))
+ continue;
- /* If the section symbol isn't going to be output, the relocs
- at least should still work. If not, figure out what to do
- when we run into that case.
+ /* Never adjust a reloc against TLS local symbol. */
+ if ((symsec->flags & SEC_THREAD_LOCAL) != 0)
+ continue;
- We refetch the segment when calling section_symbol, rather
+ /* We refetch the segment when calling section_symbol, rather
than using symsec, because S_GET_VALUE may wind up changing
the section when it calls resolve_symbol_value. */
fixp->fx_offset += S_GET_VALUE (sym);
fixp->fx_addsy = section_symbol (S_GET_SEGMENT (sym));
- symbol_mark_used_in_reloc (fixp->fx_addsy);
#ifdef DEBUG5
fprintf (stderr, "\nadjusted fixup:\n");
print_fixup (fixp);
#endif
-
- done:
- ;
}
-#if 1 /* def RELOC_REQUIRES_SYMBOL */
- else
- {
- /* There was no symbol required by this relocation. However,
- BFD doesn't really handle relocations without symbols well.
- (At least, the COFF support doesn't.) So for now we fake up
- a local symbol in the absolute section. */
-
- fixp->fx_addsy = section_symbol (absolute_section);
-#if 0
- fixp->fx_addsy->sy_used_in_reloc = 1;
-#endif
- }
-#endif
dump_section_relocs (abfd, sec, stderr);
}
+static void
+fix_segment (abfd, sec, xxx)
+ bfd *abfd ATTRIBUTE_UNUSED;
+ asection *sec;
+ PTR xxx ATTRIBUTE_UNUSED;
+{
+ segment_info_type *seginfo = seg_info (sec);
+
+ fixup_segment (seginfo->fix_root, sec);
+}
+
static void
write_relocs (abfd, sec, xxx)
bfd *abfd;
if (seginfo == NULL)
return;
- fixup_segment (seginfo->fix_root, sec);
-
n = 0;
for (fixp = seginfo->fix_root; fixp; fixp = fixp->fx_next)
n++;
case bfd_reloc_ok:
break;
case bfd_reloc_overflow:
- as_bad_where (fixp->fx_file, fixp->fx_line, _("relocation overflow"));
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("relocation overflow"));
break;
case bfd_reloc_outofrange:
- as_bad_where (fixp->fx_file, fixp->fx_line, _("relocation out of range"));
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("relocation out of range"));
break;
default:
as_fatal (_("%s:%u: bad return from bfd_install_relocation: %x"),
rather than the former. */
sym = fixp->fx_addsy;
while (symbol_equated_reloc_p (sym))
- sym = symbol_get_value_expression (sym)->X_add_symbol;
+ {
+ symbolS *n;
+
+ /* We must avoid looping, as that can occur with a badly
+ written program. */
+ n = symbol_get_value_expression (sym)->X_add_symbol;
+ if (n == sym)
+ break;
+ fixp->fx_offset += symbol_get_value_expression (sym)->X_add_number;
+ sym = n;
+ }
fixp->fx_addsy = sym;
reloc = tc_gen_reloc (sec, fixp);
as_bad_where (fixp->fx_file, fixp->fx_line,
_("relocation overflow"));
break;
+ case bfd_reloc_outofrange:
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("relocation out of range"));
+ break;
default:
- as_fatal (_("%s:%u: bad return from bfd_install_relocation"),
- fixp->fx_file, fixp->fx_line);
+ as_fatal (_("%s:%u: bad return from bfd_install_relocation: %x"),
+ fixp->fx_file, fixp->fx_line, s);
}
}
}
x = bfd_set_section_contents (stdoutput, sec,
f->fr_literal, (file_ptr) offset,
(bfd_size_type) f->fr_fix);
- if (x == false)
+ if (!x)
{
bfd_perror (stdoutput->filename);
as_perror (_("FATAL: Can't write %s"), stdoutput->filename);
fill_literal,
(file_ptr) offset,
(bfd_size_type) fill_size);
- if (x == false)
+ if (!x)
{
bfd_perror (stdoutput->filename);
as_perror (_("FATAL: Can't write %s"),
x = bfd_set_section_contents
(stdoutput, sec, buf, (file_ptr) offset,
(bfd_size_type) n_per_buf * fill_size);
- if (x != true)
+ if (!x)
as_fatal (_("cannot write to output file"));
offset += n_per_buf * fill_size;
}
int nsyms;
asymbol **asympp;
symbolS *symp;
- boolean result;
+ bfd_boolean result;
extern PTR bfd_alloc PARAMS ((bfd *, bfd_size_type));
/* Count symbols. We can't rely on a count made by the loop in
else
asympp = 0;
result = bfd_set_symtab (stdoutput, asympp, nsyms);
- assert (result == true);
+ assert (result);
symbol_table_frozen = 1;
}
#endif
-#if defined (BFD_ASSEMBLER) && defined (OBJ_COFF) && defined (TE_GO32)
-static void
-set_segment_vma (abfd, sec, xxx)
- bfd *abfd;
- asection *sec;
- PTR xxx ATTRIBUTE_UNUSED;
-{
- static bfd_vma addr = 0;
-
- bfd_set_section_vma (abfd, sec, addr);
- addr += bfd_section_size (abfd, sec);
-}
-#endif /* BFD_ASSEMBLER && OBJ_COFF && !TE_PE */
-
/* Finish the subsegments. After every sub-segment, we fake an
".align ...". This conforms to BSD4.2 brane-damage. We then fake
".fill 0" because that is the kind of frag that requires least
makes calculating their intended length trivial. */
#ifndef SUB_SEGMENT_ALIGN
+#ifdef HANDLE_ALIGN
+/* The last subsegment gets an aligment corresponding to the alignment
+ of the section. This allows proper nop-filling at the end of
+ code-bearing sections. */
+#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) \
+ (!(FRCHAIN)->frch_next || (FRCHAIN)->frch_next->frch_seg != (SEG) \
+ ? get_recorded_alignment (SEG) : 0)
+#else
#ifdef BFD_ASSEMBLER
-#define SUB_SEGMENT_ALIGN(SEG) (0)
+#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) 0
#else
-#define SUB_SEGMENT_ALIGN(SEG) (2)
+#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) 2
+#endif
#endif
#endif
for (frchainP = frchain_root; frchainP; frchainP = frchainP->frch_next)
{
- int alignment;
+ int alignment = 0;
subseg_set (frchainP->frch_seg, frchainP->frch_subseg);
/* This now gets called even if we had errors. In that case,
any alignment is meaningless, and, moreover, will look weird
if we are generating a listing. */
- alignment = had_errors () ? 0 : SUB_SEGMENT_ALIGN (now_seg);
+ if (!had_errors ())
+ {
+ alignment = SUB_SEGMENT_ALIGN (now_seg, frchainP);
+#ifdef BFD_ASSEMBLER
+ if ((bfd_get_section_flags (now_seg->owner, now_seg) & SEC_MERGE)
+ && now_seg->entsize)
+ {
+ unsigned int entsize = now_seg->entsize;
+ int entalign = 0;
- /* The last subsegment gets an aligment corresponding to the
- alignment of the section. This allows proper nop-filling
- at the end of code-bearing sections. */
- if (!frchainP->frch_next || frchainP->frch_next->frch_seg != now_seg)
- alignment = get_recorded_alignment (now_seg);
+ while ((entsize & 1) == 0)
+ {
+ ++entalign;
+ entsize >>= 1;
+ }
+ if (entalign > alignment)
+ alignment = entalign;
+ }
+#endif
+ }
if (subseg_text_p (now_seg))
frag_align_code (alignment, 0);
/* Relaxation has completed. Freeze all syms. */
finalize_syms = 1;
-#if defined (BFD_ASSEMBLER) && defined (OBJ_COFF) && defined (TE_GO32)
- /* Now that the segments have their final sizes, run through the
- sections and set their vma and lma. !BFD gas sets them, and BFD gas
- should too. Currently, only DJGPP uses this code, but other
- COFF targets may need to execute this too. */
- bfd_map_over_sections (stdoutput, set_segment_vma, (char *) 0);
-#endif
-
#ifndef BFD_ASSEMBLER
/* Crawl the symbol chain.
bfd_map_over_sections (stdoutput, adjust_reloc_syms, (char *) 0);
+#ifdef tc_frob_file_before_fix
+ tc_frob_file_before_fix ();
+#endif
+#ifdef obj_frob_file_before_fix
+ obj_frob_file_before_fix ();
+#endif
+
+ bfd_map_over_sections (stdoutput, fix_segment, (char *) 0);
+
/* Set up symbol table, and write it out. */
if (symbol_rootP)
{
want section symbols. Otherwise, we skip local symbols
and symbols that the frob_symbol macros told us to punt,
but we keep such symbols if they are used in relocs. */
- if ((! EMIT_SECTION_SYMBOLS
- && symbol_section_p (symp))
+ if (symp == abs_section_sym
+ || (! EMIT_SECTION_SYMBOLS
+ && symbol_section_p (symp))
/* Note that S_IS_EXTERN and S_IS_LOCAL are not always
opposites. Sometimes the former checks flags and the
latter examines the name... */
|| (!S_IS_EXTERN (symp)
- && (S_IS_LOCAL (symp) || punt)
+ && (punt || S_IS_LOCAL (symp))
&& ! symbol_used_in_reloc_p (symp)))
{
symbol_remove (symp, &symbol_rootP, &symbol_lastP);
#endif
know (sym_frag != NULL);
#endif
- know (!(S_GET_SEGMENT (symbolP) == absolute_section)
+ know (S_GET_SEGMENT (symbolP) != absolute_section
|| sym_frag == &zero_address_frag);
target += S_GET_VALUE (symbolP);
#if defined (BFD_ASSEMBLER) || (!defined (BFD) && !defined (OBJ_VMS))
-#ifndef TC_RELOC_RTSYM_LOC_FIXUP
-#define TC_RELOC_RTSYM_LOC_FIXUP(X) (1)
-#endif
-
/* fixup_segment()
Go through all the fixS's in a segment and see which ones can be
These will be output later by emit_relocations(). */
static long
-fixup_segment (fixP, this_segment_type)
- register fixS *fixP;
- segT this_segment_type; /* N_TYPE bits for segment. */
+fixup_segment (fixP, this_segment)
+ fixS *fixP;
+ segT this_segment;
{
long seg_reloc_count = 0;
- symbolS *add_symbolP;
- symbolS *sub_symbolP;
valueT add_number;
- int size;
- char *place;
- long where;
- int pcrel, plt;
fragS *fragP;
segT add_symbol_segment = absolute_section;
+ if (fixP != NULL && abs_section_sym == NULL)
+ {
+#ifndef BFD_ASSEMBLER
+ abs_section_sym = &abs_symbol;
+#else
+ abs_section_sym = section_symbol (absolute_section);
+#endif
+ }
+
/* If the linker is doing the relaxing, we must not do any fixups.
- Well, strictly speaking that's not true -- we could do any that are
- PC-relative and don't cross regions that could change size. And for the
- i960 (the only machine for which we've got a relaxing linker right now),
- we might be able to turn callx/callj into bal anyways in cases where we
- know the maximum displacement. */
- if (linkrelax && TC_LINKRELAX_FIXUP (this_segment_type))
+ Well, strictly speaking that's not true -- we could do any that
+ are PC-relative and don't cross regions that could change size.
+ And for the i960 we might be able to turn callx/callj into bal
+ anyways in cases where we know the maximum displacement. */
+ if (linkrelax && TC_LINKRELAX_FIXUP (this_segment))
{
for (; fixP; fixP = fixP->fx_next)
- seg_reloc_count++;
+ if (!fixP->fx_done)
+ {
+ if (fixP->fx_addsy == NULL)
+ {
+ /* There was no symbol required by this relocation.
+ However, BFD doesn't really handle relocations
+ without symbols well. So fake up a local symbol in
+ the absolute section. */
+ fixP->fx_addsy = abs_section_sym;
+ }
+ symbol_mark_used_in_reloc (fixP->fx_addsy);
+ if (fixP->fx_subsy != NULL)
+ symbol_mark_used_in_reloc (fixP->fx_subsy);
+ seg_reloc_count++;
+ }
TC_ADJUST_RELOC_COUNT (fixP, seg_reloc_count);
return seg_reloc_count;
}
fragP = fixP->fx_frag;
know (fragP);
- where = fixP->fx_where;
- place = fragP->fr_literal + where;
- size = fixP->fx_size;
- add_symbolP = fixP->fx_addsy;
#ifdef TC_VALIDATE_FIX
- TC_VALIDATE_FIX (fixP, this_segment_type, skip);
+ TC_VALIDATE_FIX (fixP, this_segment, skip);
#endif
- sub_symbolP = fixP->fx_subsy;
add_number = fixP->fx_offset;
- pcrel = fixP->fx_pcrel;
- plt = fixP->fx_plt;
- if (add_symbolP != NULL
- && symbol_mri_common_p (add_symbolP))
+ if (fixP->fx_addsy != NULL
+ && symbol_mri_common_p (fixP->fx_addsy))
{
- know (add_symbolP->sy_value.X_op == O_symbol);
- add_number += S_GET_VALUE (add_symbolP);
+ know (fixP->fx_addsy->sy_value.X_op == O_symbol);
+ add_number += S_GET_VALUE (fixP->fx_addsy);
fixP->fx_offset = add_number;
- add_symbolP = fixP->fx_addsy =
- symbol_get_value_expression (add_symbolP)->X_add_symbol;
+ fixP->fx_addsy
+ = symbol_get_value_expression (fixP->fx_addsy)->X_add_symbol;
}
- if (add_symbolP)
- add_symbol_segment = S_GET_SEGMENT (add_symbolP);
+ if (fixP->fx_addsy != NULL)
+ add_symbol_segment = S_GET_SEGMENT (fixP->fx_addsy);
- if (sub_symbolP)
+ if (fixP->fx_subsy != NULL)
{
- resolve_symbol_value (sub_symbolP);
- if (add_symbolP == NULL || add_symbol_segment == absolute_section)
+ segT sub_symbol_segment;
+ resolve_symbol_value (fixP->fx_subsy);
+ sub_symbol_segment = S_GET_SEGMENT (fixP->fx_subsy);
+ if (fixP->fx_addsy != NULL
+ && sub_symbol_segment == add_symbol_segment
+ && !TC_FORCE_RELOCATION_SUB_SAME (fixP, add_symbol_segment))
{
- if (add_symbolP != NULL)
- {
- add_number += S_GET_VALUE (add_symbolP);
- add_symbolP = NULL;
- fixP->fx_addsy = NULL;
- }
-
- /* It's just -sym. */
- if (S_GET_SEGMENT (sub_symbolP) == absolute_section)
- {
- add_number -= S_GET_VALUE (sub_symbolP);
- fixP->fx_subsy = NULL;
- }
- else if (pcrel
- && S_GET_SEGMENT (sub_symbolP) == this_segment_type)
- {
- /* Should try converting to a constant. */
- goto bad_sub_reloc;
- }
- else
- bad_sub_reloc:
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("negative of non-absolute symbol `%s'"),
- S_GET_NAME (sub_symbolP));
- }
- else if (S_GET_SEGMENT (sub_symbolP) == add_symbol_segment
- && SEG_NORMAL (add_symbol_segment))
- {
- /* Difference of 2 symbols from same segment.
- Can't make difference of 2 undefineds: 'value' means
- something different for N_UNDF. */
-#ifdef TC_I960
- /* Makes no sense to use the difference of 2 arbitrary symbols
- as the target of a call instruction. */
- if (fixP->fx_tcbit)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("callj to difference of two symbols"));
-#endif /* TC_I960 */
- add_number += (S_GET_VALUE (add_symbolP)
- - S_GET_VALUE (sub_symbolP));
+ add_number += S_GET_VALUE (fixP->fx_addsy);
+ add_number -= S_GET_VALUE (fixP->fx_subsy);
+ fixP->fx_offset = add_number;
+ /* If the back-end code has selected a pc-relative
+ reloc, adjust the value to be pc-relative. */
if (1
#ifdef TC_M68K
/* See the comment below about 68k weirdness. */
&& 0
#endif
- && pcrel)
- add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment_type);
-
- add_symbolP = NULL;
- pcrel = 0; /* No further pcrel processing. */
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
- if (!TC_FORCE_RELOCATION_SECTION (fixP, this_segment_type))
- {
- fixP->fx_pcrel = 0;
- fixP->fx_addsy = NULL;
- fixP->fx_subsy = NULL;
- }
+ && fixP->fx_pcrel)
+ add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment);
+ fixP->fx_addsy = NULL;
+ fixP->fx_subsy = NULL;
+ fixP->fx_pcrel = 0;
}
- else
+ else if (sub_symbol_segment == absolute_section
+ && !TC_FORCE_RELOCATION_SUB_ABS (fixP))
{
- /* Different segments in subtraction. */
- know (!(S_IS_EXTERNAL (sub_symbolP)
- && (S_GET_SEGMENT (sub_symbolP) == absolute_section)));
-
- if ((S_GET_SEGMENT (sub_symbolP) == absolute_section))
- add_number -= S_GET_VALUE (sub_symbolP);
-
-#ifdef DIFF_EXPR_OK
- else if (S_GET_SEGMENT (sub_symbolP) == this_segment_type)
- {
- /* Make it pc-relative. */
- if (0
+ add_number -= S_GET_VALUE (fixP->fx_subsy);
+ fixP->fx_offset = add_number;
+ fixP->fx_subsy = NULL;
+ }
+ else if (sub_symbol_segment == this_segment
+ && !TC_FORCE_RELOCATION_SUB_LOCAL (fixP))
+ {
+ add_number -= S_GET_VALUE (fixP->fx_subsy);
+ fixP->fx_offset = (add_number + fixP->fx_dot_value
+ + fixP->fx_frag->fr_address);
+
+ /* Make it pc-relative. If the back-end code has not
+ selected a pc-relative reloc, cancel the adjustment
+ we do later on all pc-relative relocs. */
+ if (0
#ifdef TC_M68K
- /* Do this for m68k even if it's already described
- as pc-relative. On the m68k, an operand of
- "pc@(foo-.-2)" should address "foo" in a
- pc-relative mode. */
- || 1
-#endif
- || !pcrel)
- {
- add_number += MD_PCREL_FROM_SECTION (fixP,
- this_segment_type);
- pcrel = 1;
- fixP->fx_pcrel = 1;
- }
-
- add_number -= S_GET_VALUE (sub_symbolP);
- sub_symbolP = 0;
- fixP->fx_subsy = 0;
- }
-#endif
-#ifdef UNDEFINED_DIFFERENCE_OK
- /* The PA needs this for PIC code generation. We basically
- don't want to do anything if we have the difference of two
- symbols at this point. */
- else if (1)
- {
- /* Leave it alone. */
- }
-#endif
-#ifdef BFD_ASSEMBLER
- else if (fixP->fx_r_type == BFD_RELOC_GPREL32
- || fixP->fx_r_type == BFD_RELOC_GPREL16)
- {
- /* Leave it alone. */
- }
-#endif
- else
- {
- char buf[50];
- sprint_value (buf, fragP->fr_address + where);
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("subtraction of two symbols in different sections `%s' {%s section} - `%s' {%s section} at file address %s"),
- S_GET_NAME (add_symbolP),
- segment_name (S_GET_SEGMENT (add_symbolP)),
- S_GET_NAME (sub_symbolP),
- segment_name (S_GET_SEGMENT (sub_symbolP)),
- buf);
- }
+ /* Do this for m68k even if it's already described
+ as pc-relative. On the m68k, an operand of
+ "pc@(foo-.-2)" should address "foo" in a
+ pc-relative mode. */
+ || 1
+#endif
+ || !fixP->fx_pcrel)
+ add_number += MD_PCREL_FROM_SECTION (fixP, this_segment);
+ fixP->fx_subsy = NULL;
+ fixP->fx_pcrel = 1;
+ }
+ else if (!TC_VALIDATE_FIX_SUB (fixP))
+ {
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("can't resolve `%s' {%s section} - `%s' {%s section}"),
+ fixP->fx_addsy ? S_GET_NAME (fixP->fx_addsy) : "0",
+ segment_name (add_symbol_segment),
+ S_GET_NAME (fixP->fx_subsy),
+ segment_name (sub_symbol_segment));
}
}
- if (add_symbolP)
+ if (fixP->fx_addsy)
{
- if (add_symbol_segment == this_segment_type && pcrel && !plt
- && TC_RELOC_RTSYM_LOC_FIXUP (fixP))
+ if (add_symbol_segment == this_segment
+ && !TC_FORCE_RELOCATION_LOCAL (fixP))
{
/* This fixup was made when the symbol's segment was
SEG_UNKNOWN, but it is now in the local segment.
So we know how to do the address without relocation. */
-#ifdef TC_I960
- /* reloc_callj() may replace a 'call' with a 'calls' or a
- 'bal', in which cases it modifies *fixP as appropriate.
- In the case of a 'calls', no further work is required,
- and *fixP has been set up to make the rest of the code
- below a no-op. */
- reloc_callj (fixP);
-#endif /* TC_I960 */
-
- add_number += S_GET_VALUE (add_symbolP);
- add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment_type);
- /* Lie. Don't want further pcrel processing. */
- pcrel = 0;
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
- if (!TC_FORCE_RELOCATION (fixP))
- {
- fixP->fx_pcrel = 0;
- fixP->fx_addsy = NULL;
- }
+ add_number += S_GET_VALUE (fixP->fx_addsy);
+ fixP->fx_offset = add_number;
+ if (fixP->fx_pcrel)
+ add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment);
+ fixP->fx_addsy = NULL;
+ fixP->fx_pcrel = 0;
}
- else
+ else if (add_symbol_segment == absolute_section
+ && !TC_FORCE_RELOCATION_ABS (fixP))
{
- if (add_symbol_segment == absolute_section
- && ! pcrel)
- {
-#ifdef TC_I960
- /* See comment about reloc_callj() above. */
- reloc_callj (fixP);
-#endif /* TC_I960 */
- add_number += S_GET_VALUE (add_symbolP);
-
- /* Let the target machine make the final determination
- as to whether or not a relocation will be needed to
- handle this fixup. */
-
- if (!TC_FORCE_RELOCATION (fixP))
- {
- fixP->fx_addsy = NULL;
- add_symbolP = NULL;
- }
- }
- else if (add_symbol_segment == undefined_section
+ add_number += S_GET_VALUE (fixP->fx_addsy);
+ fixP->fx_offset = add_number;
+ fixP->fx_addsy = NULL;
+ }
+ else if (add_symbol_segment != undefined_section
#ifdef BFD_ASSEMBLER
- || bfd_is_com_section (add_symbol_segment)
+ && ! bfd_is_com_section (add_symbol_segment)
#endif
- )
- {
-#ifdef TC_I960
- if ((int) fixP->fx_bit_fixP == 13)
- {
- /* This is a COBR instruction. They have only a
- 13-bit displacement and are only to be used
- for local branches: flag as error, don't generate
- relocation. */
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("can't use COBR format with external label"));
- fixP->fx_addsy = NULL;
- fixP->fx_done = 1;
- continue;
- } /* COBR. */
-#endif /* TC_I960 */
-
-#ifdef OBJ_COFF
-#ifdef TE_I386AIX
- if (S_IS_COMMON (add_symbolP))
- add_number += S_GET_VALUE (add_symbolP);
-#endif /* TE_I386AIX */
-#endif /* OBJ_COFF */
- ++seg_reloc_count;
- }
- else
- {
- seg_reloc_count++;
- if (TC_FIX_ADJUSTABLE (fixP))
- add_number += S_GET_VALUE (add_symbolP);
- }
- }
+ && MD_APPLY_SYM_VALUE (fixP))
+ add_number += S_GET_VALUE (fixP->fx_addsy);
}
- if (pcrel)
+ if (fixP->fx_pcrel)
{
- add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment_type);
- if (add_symbolP == 0)
+ add_number -= MD_PCREL_FROM_SECTION (fixP, this_segment);
+ if (!fixP->fx_done && fixP->fx_addsy == NULL)
{
-#ifndef BFD_ASSEMBLER
- fixP->fx_addsy = &abs_symbol;
-#else
- fixP->fx_addsy = section_symbol (absolute_section);
-#endif
- symbol_mark_used_in_reloc (fixP->fx_addsy);
- ++seg_reloc_count;
+ /* There was no symbol required by this relocation.
+ However, BFD doesn't really handle relocations
+ without symbols well. So fake up a local symbol in
+ the absolute section. */
+ fixP->fx_addsy = abs_section_sym;
}
}
if (!fixP->fx_done)
- md_apply_fix3 (fixP, & add_number, this_segment_type);
+ md_apply_fix3 (fixP, &add_number, this_segment);
+
+ if (!fixP->fx_done)
+ {
+ ++seg_reloc_count;
+ if (fixP->fx_addsy == NULL)
+ fixP->fx_addsy = abs_section_sym;
+ symbol_mark_used_in_reloc (fixP->fx_addsy);
+ if (fixP->fx_subsy != NULL)
+ symbol_mark_used_in_reloc (fixP->fx_subsy);
+ }
- if (!fixP->fx_bit_fixP && !fixP->fx_no_overflow && size > 0)
+ if (!fixP->fx_bit_fixP && !fixP->fx_no_overflow && fixP->fx_size != 0)
{
- if ((size_t) size < sizeof (valueT))
+ if (fixP->fx_size < sizeof (valueT))
{
valueT mask;
mask = 0;
mask--; /* Set all bits to one. */
- mask <<= size * 8 - (fixP->fx_signed ? 1 : 0);
+ mask <<= fixP->fx_size * 8 - (fixP->fx_signed ? 1 : 0);
if ((add_number & mask) != 0 && (add_number & mask) != mask)
{
char buf[50], buf2[50];
- sprint_value (buf, fragP->fr_address + where);
+ sprint_value (buf, fragP->fr_address + fixP->fx_where);
if (add_number > 1000)
sprint_value (buf2, add_number);
else
sprintf (buf2, "%ld", (long) add_number);
as_bad_where (fixP->fx_file, fixP->fx_line,
_("value of %s too large for field of %d bytes at %s"),
- buf2, size, buf);
+ buf2, fixP->fx_size, buf);
} /* Generic error checking. */
}
#ifdef WARN_SIGNED_OVERFLOW_WORD
number. We already know it is not too negative. This is to
catch over-large switches generated by gcc on the 68k. */
if (!flag_signed_overflow_ok
- && size == 2
+ && fixP->fx_size == 2
&& add_number > 0x7fff)
as_bad_where (fixP->fx_file, fixP->fx_line,
_("signed .word overflow; switch may be too large; %ld at 0x%lx"),
(long) add_number,
- (unsigned long) (fragP->fr_address + where));
+ (long) (fragP->fr_address + fixP->fx_where));
#endif
} /* Not a bit fix. */
projects / deliverable / binutils-gdb.git / blobdiff