/* write.c - emit .o file
- Copyright 1986, 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
- 2010, 2011, 2012 Free Software Foundation, Inc.
+ Copyright (C) 1986-2016 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
#include "obstack.h"
#include "output-file.h"
#include "dwarf2dbg.h"
-#include "libbfd.h"
#include "compress-debug.h"
-#ifndef TC_ADJUST_RELOC_COUNT
-#define TC_ADJUST_RELOC_COUNT(FIX, COUNT)
-#endif
-
#ifndef TC_FORCE_RELOCATION
#define TC_FORCE_RELOCATION(FIX) \
(generic_force_reloc (FIX))
/* Remember the value of dot when parsing expressions. */
addressT dot_value;
+/* The frag that dot_value is based from. */
+fragS *dot_frag;
+
/* Relocs generated by ".reloc" pseudo. */
struct reloc_list* reloc_list;
fixP->fx_subsy = sub_symbol;
fixP->fx_offset = offset;
fixP->fx_dot_value = dot_value;
+ fixP->fx_dot_frag = dot_frag;
fixP->fx_pcrel = pcrel;
fixP->fx_r_type = r_type;
fixP->fx_im_disp = 0;
TC_INIT_FIX_DATA (fixP);
#endif
- as_where (&fixP->fx_file, &fixP->fx_line);
+ fixP->fx_file = as_where (&fixP->fx_line);
{
segT seg,
/* Alignment, as a power of 2 (e.g., 1 => 2-byte
boundary, 2 => 4-byte boundary, etc.) */
- int align)
+ unsigned int align)
{
if (seg == absolute_section)
return;
- if ((unsigned int) align > bfd_get_section_alignment (stdoutput, seg))
+ if (align > bfd_get_section_alignment (stdoutput, seg))
bfd_set_section_alignment (stdoutput, seg, align);
}
prev_fix = frchp->fix_tail;
}
}
- gas_assert (prev_frag->fr_type != 0);
- gas_assert (prev_frag != &dummy);
+ gas_assert (prev_frag != &dummy
+ && prev_frag->fr_type != 0);
prev_frag->fr_next = 0;
return prev_frag;
}
x = bfd_set_section_flags (abfd, sec, flags);
gas_assert (x);
- newsize = md_section_align (sec, size);
+ /* If permitted, allow the backend to pad out the section
+ to some alignment boundary. */
+ if (do_not_pad_sections_to_alignment)
+ newsize = size;
+ else
+ newsize = md_section_align (sec, size);
x = bfd_set_section_size (abfd, sec, newsize);
gas_assert (x);
unless it has enough bits to cover the whole address
space. */
if (S_IS_LOCAL (sym) && !symbol_section_p (sym)
- && !(howto->partial_inplace
- && howto->pc_relative
- && howto->src_mask != addr_mask))
+ && (sec->use_rela_p
+ || (howto->partial_inplace
+ && (!howto->pc_relative
+ || howto->src_mask == addr_mask))))
{
asection *symsec = S_GET_SEGMENT (sym);
if (!(((symsec->flags & SEC_MERGE) != 0
if (symsec == NULL)
abort ();
- if (bfd_is_abs_section (symsec))
+ if (bfd_is_abs_section (symsec)
+ || symsec == reg_section)
{
/* The fixup_segment routine normally will not use this
symbol in a relocation. */
handled now. (These consist of fixS where we have since discovered
the value of a symbol, or the address of the frag involved.)
For each one, call md_apply_fix to put the fix into the frag data.
+ Ones that we couldn't completely handle here will be output later
+ by emit_relocations. */
- Result is a count of how many relocation structs will be needed to
- handle the remaining fixS's that we couldn't completely handle here.
- These will be output later by emit_relocations(). */
-
-static long
+static void
fixup_segment (fixS *fixP, segT this_segment)
{
- long seg_reloc_count = 0;
valueT add_number;
fragS *fragP;
segT add_symbol_segment = absolute_section;
symbol_mark_used_in_reloc (fixP->fx_addsy);
if (fixP->fx_subsy != NULL)
symbol_mark_used_in_reloc (fixP->fx_subsy);
- seg_reloc_count++;
}
- TC_ADJUST_RELOC_COUNT (fixP, seg_reloc_count);
- return seg_reloc_count;
+ return;
}
for (; fixP; fixP = fixP->fx_next)
{
add_number -= S_GET_VALUE (fixP->fx_subsy);
fixP->fx_offset = (add_number + fixP->fx_dot_value
- + fixP->fx_frag->fr_address);
+ + fixP->fx_dot_frag->fr_address);
/* Make it pc-relative. If the back-end code has not
selected a pc-relative reloc, cancel the adjustment
S_GET_NAME (fixP->fx_subsy),
segment_name (sub_symbol_segment));
}
+ else if (sub_symbol_segment != undefined_section
+ && ! bfd_is_com_section (sub_symbol_segment)
+ && MD_APPLY_SYM_VALUE (fixP))
+ add_number -= S_GET_VALUE (fixP->fx_subsy);
}
if (fixP->fx_addsy)
if (!fixP->fx_done)
{
- ++seg_reloc_count;
if (fixP->fx_addsy == NULL)
fixP->fx_addsy = abs_section_sym;
symbol_mark_used_in_reloc (fixP->fx_addsy);
print_fixup (fixP);
#endif
} /* For each fixS in this segment. */
-
- TC_ADJUST_RELOC_COUNT (fixP, seg_reloc_count);
- return seg_reloc_count;
}
static void
static void
install_reloc (asection *sec, arelent *reloc, fragS *fragp,
- char *file, unsigned int line)
+ const char *file, unsigned int line)
{
char *err;
bfd_reloc_status_type s;
const struct reloc_list *r)
{
fragS *f;
-
+
for (f = last_frag; f != NULL; f = f->fr_next)
if (f->fr_address <= r->u.b.r.address
&& r->u.b.r.address < f->fr_address + f->fr_fix)
&& r->u.b.r.address < f->fr_address + f->fr_fix)
return f;
+ for (f = seginfo->frchainP->frch_root; f != NULL; f = f->fr_next)
+ if (f->fr_address <= r->u.b.r.address
+ && r->u.b.r.address <= f->fr_address + f->fr_fix)
+ return f;
+
as_bad_where (r->file, r->line,
_("reloc not within (fixed part of) section"));
return NULL;
rp = &r->next;
}
- relocs = (arelent **) xcalloc (n, sizeof (arelent *));
+ relocs = XCNEWVEC (arelent *, n);
n = 0;
r = my_reloc_list;
struct z_stream_s *strm;
int x;
flagword flags = bfd_get_section_flags (abfd, sec);
+ unsigned int header_size, compression_header_size;
if (seginfo == NULL
|| sec->size < 32
if (strm == NULL)
return;
- /* Create a new frag to contain the "ZLIB" header. */
+ if (flag_compress_debug == COMPRESS_DEBUG_GABI_ZLIB)
+ {
+ compression_header_size
+ = bfd_get_compression_header_size (stdoutput, NULL);
+ header_size = compression_header_size;
+ }
+ else
+ {
+ compression_header_size = 0;
+ header_size = 12;
+ }
+
+ /* Create a new frag to contain the compression header. */
first_newf = frag_alloc (ob);
- if (obstack_room (ob) < 12)
+ if (obstack_room (ob) < header_size)
first_newf = frag_alloc (ob);
- if (obstack_room (ob) < 12)
- as_fatal (_("can't extend frag %u chars"), 12);
+ if (obstack_room (ob) < header_size)
+ as_fatal (_("can't extend frag %u chars"), header_size);
last_newf = first_newf;
- obstack_blank_fast (ob, 12);
+ obstack_blank_fast (ob, header_size);
last_newf->fr_type = rs_fill;
- last_newf->fr_fix = 12;
+ last_newf->fr_fix = header_size;
header = last_newf->fr_literal;
- memcpy (header, "ZLIB", 4);
- header[11] = uncompressed_size; uncompressed_size >>= 8;
- header[10] = uncompressed_size; uncompressed_size >>= 8;
- header[9] = uncompressed_size; uncompressed_size >>= 8;
- header[8] = uncompressed_size; uncompressed_size >>= 8;
- header[7] = uncompressed_size; uncompressed_size >>= 8;
- header[6] = uncompressed_size; uncompressed_size >>= 8;
- header[5] = uncompressed_size; uncompressed_size >>= 8;
- header[4] = uncompressed_size;
- compressed_size = 12;
+ compressed_size = header_size;
/* Stream the frags through the compression engine, adding new frags
as necessary to accomodate the compressed output. */
break;
}
+ /* PR binutils/18087: If compression didn't make the section smaller,
+ just keep it uncompressed. */
+ if (compressed_size >= uncompressed_size)
+ return;
+
/* Replace the uncompressed frag list with the compressed frag list. */
seginfo->frchainP->frch_root = first_newf;
seginfo->frchainP->frch_last = last_newf;
/* Update the section size and its name. */
+ bfd_update_compression_header (abfd, (bfd_byte *) header, sec);
x = bfd_set_section_size (abfd, sec, compressed_size);
gas_assert (x);
- compressed_name = (char *) xmalloc (strlen (section_name) + 2);
- compressed_name[0] = '.';
- compressed_name[1] = 'z';
- strcpy (compressed_name + 2, section_name + 1);
- bfd_section_name (stdoutput, sec) = compressed_name;
+ if (!compression_header_size)
+ {
+ compressed_name = concat (".z", section_name + 1, (char *) NULL);
+ bfd_section_name (stdoutput, sec) = compressed_name;
+ }
}
static void
f->fr_literal, (file_ptr) offset,
(bfd_size_type) f->fr_fix);
if (!x)
- as_fatal (_("can't write %s: %s"), stdoutput->filename,
+ as_fatal (_("can't write %ld bytes to section %s of %s because: '%s'"),
+ (long) f->fr_fix, sec->name,
+ stdoutput->filename,
bfd_errmsg (bfd_get_error ()));
offset += f->fr_fix;
}
(file_ptr) offset,
(bfd_size_type) fill_size);
if (!x)
- as_fatal (_("can't write %s: %s"), stdoutput->filename,
+ as_fatal (_("can't fill %ld bytes in section %s of %s because '%s'"),
+ (long) fill_size, sec->name,
+ stdoutput->filename,
bfd_errmsg (bfd_get_error ()));
offset += fill_size;
}
(stdoutput, sec, buf, (file_ptr) offset,
(bfd_size_type) n_per_buf * fill_size);
if (!x)
- as_fatal (_("cannot write to output file '%s': %s"),
+ as_fatal (_("cannot fill %ld bytes in section %s of %s because: '%s'"),
+ (long)(n_per_buf * fill_size), sec->name,
stdoutput->filename,
bfd_errmsg (bfd_get_error ()));
offset += n_per_buf * fill_size;
}
/* Finish the subsegments. After every sub-segment, we fake an
- ".align ...". This conforms to BSD4.2 brane-damage. We then fake
+ ".align ...". This conforms to BSD4.2 brain-damage. We then fake
".fill 0" because that is the kind of frag that requires least
thought. ".align" frags like to have a following frag since that
makes calculating their intended length trivial. */
of the section. This allows proper nop-filling at the end of
code-bearing sections. */
#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) \
- (!(FRCHAIN)->frch_next ? get_recorded_alignment (SEG) : 0)
+ (!(FRCHAIN)->frch_next && subseg_text_p (SEG) \
+ && !do_not_pad_sections_to_alignment \
+ ? get_recorded_alignment (SEG) \
+ : 0)
#else
#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) 0
#endif
#endif
-void
-subsegs_finish (void)
+static void
+subsegs_finish_section (asection *s)
{
struct frchain *frchainP;
- asection *s;
+ segment_info_type *seginfo = seg_info (s);
+ if (!seginfo)
+ return;
- for (s = stdoutput->sections; s; s = s->next)
+ for (frchainP = seginfo->frchainP;
+ frchainP != NULL;
+ frchainP = frchainP->frch_next)
{
- segment_info_type *seginfo = seg_info (s);
- if (!seginfo)
- continue;
+ int alignment;
- for (frchainP = seginfo->frchainP;
- frchainP != NULL;
- frchainP = frchainP->frch_next)
- {
- int alignment = 0;
+ subseg_set (s, frchainP->frch_subseg);
- subseg_set (s, frchainP->frch_subseg);
+ /* This now gets called even if we had errors. In that case,
+ any alignment is meaningless, and, moreover, will look weird
+ if we are generating a listing. */
+ if (had_errors ())
+ do_not_pad_sections_to_alignment = 1;
- /* This now gets called even if we had errors. In that case,
- any alignment is meaningless, and, moreover, will look weird
- if we are generating a listing. */
- if (!had_errors ())
- {
- alignment = SUB_SEGMENT_ALIGN (now_seg, frchainP);
- if ((bfd_get_section_flags (now_seg->owner, now_seg) & SEC_MERGE)
- && now_seg->entsize)
- {
- unsigned int entsize = now_seg->entsize;
- int entalign = 0;
+ alignment = SUB_SEGMENT_ALIGN (now_seg, frchainP);
+ if ((bfd_get_section_flags (now_seg->owner, now_seg) & SEC_MERGE)
+ && now_seg->entsize)
+ {
+ unsigned int entsize = now_seg->entsize;
+ int entalign = 0;
- while ((entsize & 1) == 0)
- {
- ++entalign;
- entsize >>= 1;
- }
- if (entalign > alignment)
- alignment = entalign;
- }
+ while ((entsize & 1) == 0)
+ {
+ ++entalign;
+ entsize >>= 1;
}
- if (subseg_text_p (now_seg))
- frag_align_code (alignment, 0);
- else
- frag_align (alignment, 0, 0);
+ if (entalign > alignment)
+ alignment = entalign;
+ }
- /* frag_align will have left a new frag.
- Use this last frag for an empty ".fill".
+ if (subseg_text_p (now_seg))
+ frag_align_code (alignment, 0);
+ else
+ frag_align (alignment, 0, 0);
- For this segment ...
- Create a last frag. Do not leave a "being filled in frag". */
- frag_wane (frag_now);
- frag_now->fr_fix = 0;
- know (frag_now->fr_next == NULL);
- }
+ /* frag_align will have left a new frag.
+ Use this last frag for an empty ".fill".
+
+ For this segment ...
+ Create a last frag. Do not leave a "being filled in frag". */
+ frag_wane (frag_now);
+ frag_now->fr_fix = 0;
+ know (frag_now->fr_next == NULL);
}
}
+static void
+subsegs_finish (void)
+{
+ asection *s;
+
+ for (s = stdoutput->sections; s; s = s->next)
+ subsegs_finish_section (s);
+}
+
+#ifdef OBJ_ELF
+static void
+create_obj_attrs_section (void)
+{
+ segT s;
+ char *p;
+ offsetT size;
+ const char *name;
+
+ size = bfd_elf_obj_attr_size (stdoutput);
+ if (size)
+ {
+ name = get_elf_backend_data (stdoutput)->obj_attrs_section;
+ if (!name)
+ name = ".gnu.attributes";
+ s = subseg_new (name, 0);
+ elf_section_type (s)
+ = get_elf_backend_data (stdoutput)->obj_attrs_section_type;
+ bfd_set_section_flags (stdoutput, s, SEC_READONLY | SEC_DATA);
+ frag_now_fix ();
+ p = frag_more (size);
+ bfd_elf_set_obj_attr_contents (stdoutput, (bfd_byte *)p, size);
+
+ subsegs_finish_section (s);
+ relax_segment (seg_info (s)->frchainP->frch_root, s, 0);
+ size_seg (stdoutput, s, NULL);
+ }
+}
+#endif
+
/* Write the object file. */
void
fragS *fragP; /* Track along all frags. */
#endif
- /* Do we really want to write it? */
- {
- int n_warns, n_errs;
- n_warns = had_warnings ();
- n_errs = had_errors ();
- /* The -Z flag indicates that an object file should be generated,
- regardless of warnings and errors. */
- if (flag_always_generate_output)
- {
- if (n_warns || n_errs)
- as_warn (_("%d error%s, %d warning%s, generating bad object file"),
- n_errs, n_errs == 1 ? "" : "s",
- n_warns, n_warns == 1 ? "" : "s");
- }
- else
- {
- if (n_errs)
- as_fatal (_("%d error%s, %d warning%s, no object file generated"),
- n_errs, n_errs == 1 ? "" : "s",
- n_warns, n_warns == 1 ? "" : "s");
- }
- }
+ subsegs_finish ();
+
+#ifdef md_pre_output_hook
+ md_pre_output_hook;
+#endif
+
+#ifdef md_pre_relax_hook
+ md_pre_relax_hook;
+#endif
/* From now on, we don't care about sub-segments. Build one frag chain
for each segment. Linked thru fr_next. */
md_post_relax_hook;
#endif
+#ifdef OBJ_ELF
+ if (IS_ELF)
+ create_obj_attrs_section ();
+#endif
+
#ifndef WORKING_DOT_WORD
{
struct broken_word *lie;
#ifdef TC_CONS_FIX_NEW
TC_CONS_FIX_NEW (lie->frag,
lie->word_goes_here - lie->frag->fr_literal,
- 2, &exp);
+ 2, &exp, TC_PARSE_CONS_RETURN_NONE);
#else
fix_new_exp (lie->frag,
lie->word_goes_here - lie->frag->fr_literal,
obj_frob_file_after_relocs ();
#endif
+#if defined OBJ_ELF || defined OBJ_MAYBE_ELF
+ if (IS_ELF && flag_use_elf_stt_common)
+ stdoutput->flags |= BFD_CONVERT_ELF_COMMON | BFD_USE_ELF_STT_COMMON;
+#endif
+
/* Once all relocations have been written, we can compress the
contents of the debug sections. This needs to be done before
we start writing any sections, because it will affect the file
layout, which is fixed once we start writing contents. */
if (flag_compress_debug)
- bfd_map_over_sections (stdoutput, compress_debug, (char *) 0);
+ {
+ if (flag_compress_debug == COMPRESS_DEBUG_GABI_ZLIB)
+ stdoutput->flags |= BFD_COMPRESS | BFD_COMPRESS_GABI;
+ else
+ stdoutput->flags |= BFD_COMPRESS;
+ bfd_map_over_sections (stdoutput, compress_debug, (char *) 0);
+ }
bfd_map_over_sections (stdoutput, write_contents, (char *) 0);
}
/* Relax_align. Advance location counter to next address that has 'alignment'
lowest order bits all 0s, return size of adjustment made. */
static relax_addressT
-relax_align (register relax_addressT address, /* Address now. */
- register int alignment /* Alignment (binary). */)
+relax_align (relax_addressT address, /* Address now. */
+ int alignment /* Alignment (binary). */)
{
relax_addressT mask;
relax_addressT new_address;
- mask = ~((~0) << alignment);
+ mask = ~((relax_addressT) ~0 << alignment);
new_address = (address + mask) & (~mask);
#ifdef LINKER_RELAXING_SHRINKS_ONLY
if (linkrelax)
projects / deliverable / binutils-gdb.git / blobdiff