/* write.c - emit .o file
- Copyright (C) 1986-2014 Free Software Foundation, Inc.
+ Copyright (C) 1986-2017 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
02110-1301, USA. */
-/* This thing should be set up to do byteordering correctly. But... */
+/* This thing should be set up to do byte ordering correctly. But... */
#include "as.h"
#include "subsegs.h"
#include "obstack.h"
#include "output-file.h"
#include "dwarf2dbg.h"
-#include "libbfd.h"
#include "compress-debug.h"
#ifndef TC_FORCE_RELOCATION
TC_INIT_FIX_DATA (fixP);
#endif
- as_where (&fixP->fx_file, &fixP->fx_line);
+ fixP->fx_file = as_where (&fixP->fx_line);
{
segT seg,
/* Alignment, as a power of 2 (e.g., 1 => 2-byte
boundary, 2 => 4-byte boundary, etc.) */
- int align)
+ unsigned int align)
{
if (seg == absolute_section)
return;
- if ((unsigned int) align > bfd_get_section_alignment (stdoutput, seg))
+ if (align > bfd_get_section_alignment (stdoutput, seg))
bfd_set_section_alignment (stdoutput, seg, align);
}
x = bfd_set_section_flags (abfd, sec, flags);
gas_assert (x);
- newsize = md_section_align (sec, size);
+ /* If permitted, allow the backend to pad out the section
+ to some alignment boundary. */
+ if (do_not_pad_sections_to_alignment)
+ newsize = size;
+ else
+ newsize = md_section_align (sec, size);
x = bfd_set_section_size (abfd, sec, newsize);
gas_assert (x);
static void
install_reloc (asection *sec, arelent *reloc, fragS *fragp,
- char *file, unsigned int line)
+ const char *file, unsigned int line)
{
char *err;
bfd_reloc_status_type s;
&& r->u.b.r.address < f->fr_address + f->fr_fix)
return f;
+ for (f = seginfo->frchainP->frch_root; f != NULL; f = f->fr_next)
+ if (f->fr_address <= r->u.b.r.address
+ && r->u.b.r.address <= f->fr_address + f->fr_fix)
+ return f;
+
as_bad_where (r->file, r->line,
_("reloc not within (fixed part of) section"));
return NULL;
rp = &r->next;
}
- relocs = (arelent **) xcalloc (n, sizeof (arelent *));
+ relocs = XCNEWVEC (arelent *, n);
n = 0;
r = my_reloc_list;
struct z_stream_s *strm;
int x;
flagword flags = bfd_get_section_flags (abfd, sec);
+ unsigned int header_size, compression_header_size;
if (seginfo == NULL
|| sec->size < 32
if (strm == NULL)
return;
- /* Create a new frag to contain the "ZLIB" header. */
+ if (flag_compress_debug == COMPRESS_DEBUG_GABI_ZLIB)
+ {
+ compression_header_size
+ = bfd_get_compression_header_size (stdoutput, NULL);
+ header_size = compression_header_size;
+ }
+ else
+ {
+ compression_header_size = 0;
+ header_size = 12;
+ }
+
+ /* Create a new frag to contain the compression header. */
first_newf = frag_alloc (ob);
- if (obstack_room (ob) < 12)
+ if (obstack_room (ob) < header_size)
first_newf = frag_alloc (ob);
- if (obstack_room (ob) < 12)
- as_fatal (_("can't extend frag %u chars"), 12);
+ if (obstack_room (ob) < header_size)
+ as_fatal (_("can't extend frag %u chars"), header_size);
last_newf = first_newf;
- obstack_blank_fast (ob, 12);
+ obstack_blank_fast (ob, header_size);
last_newf->fr_type = rs_fill;
- last_newf->fr_fix = 12;
+ last_newf->fr_fix = header_size;
header = last_newf->fr_literal;
- memcpy (header, "ZLIB", 4);
- header[11] = uncompressed_size; uncompressed_size >>= 8;
- header[10] = uncompressed_size; uncompressed_size >>= 8;
- header[9] = uncompressed_size; uncompressed_size >>= 8;
- header[8] = uncompressed_size; uncompressed_size >>= 8;
- header[7] = uncompressed_size; uncompressed_size >>= 8;
- header[6] = uncompressed_size; uncompressed_size >>= 8;
- header[5] = uncompressed_size; uncompressed_size >>= 8;
- header[4] = uncompressed_size;
- compressed_size = 12;
+ compressed_size = header_size;
/* Stream the frags through the compression engine, adding new frags
- as necessary to accomodate the compressed output. */
+ as necessary to accommodate the compressed output. */
for (f = seginfo->frchainP->frch_root;
f;
f = f->fr_next)
break;
}
+ /* PR binutils/18087: If compression didn't make the section smaller,
+ just keep it uncompressed. */
+ if (compressed_size >= uncompressed_size)
+ return;
+
/* Replace the uncompressed frag list with the compressed frag list. */
seginfo->frchainP->frch_root = first_newf;
seginfo->frchainP->frch_last = last_newf;
/* Update the section size and its name. */
+ bfd_update_compression_header (abfd, (bfd_byte *) header, sec);
x = bfd_set_section_size (abfd, sec, compressed_size);
gas_assert (x);
- compressed_name = (char *) xmalloc (strlen (section_name) + 2);
- compressed_name[0] = '.';
- compressed_name[1] = 'z';
- strcpy (compressed_name + 2, section_name + 1);
- bfd_section_name (stdoutput, sec) = compressed_name;
+ if (!compression_header_size)
+ {
+ compressed_name = concat (".z", section_name + 1, (char *) NULL);
+ bfd_section_name (stdoutput, sec) = compressed_name;
+ }
}
static void
f->fr_literal, (file_ptr) offset,
(bfd_size_type) f->fr_fix);
if (!x)
- as_fatal (_("can't write %s: %s"), stdoutput->filename,
+ as_fatal (_("can't write %ld bytes to section %s of %s because: '%s'"),
+ (long) f->fr_fix, sec->name,
+ stdoutput->filename,
bfd_errmsg (bfd_get_error ()));
offset += f->fr_fix;
}
(file_ptr) offset,
(bfd_size_type) fill_size);
if (!x)
- as_fatal (_("can't write %s: %s"), stdoutput->filename,
+ as_fatal (_("can't fill %ld bytes in section %s of %s because '%s'"),
+ (long) fill_size, sec->name,
+ stdoutput->filename,
bfd_errmsg (bfd_get_error ()));
offset += fill_size;
}
(stdoutput, sec, buf, (file_ptr) offset,
(bfd_size_type) n_per_buf * fill_size);
if (!x)
- as_fatal (_("cannot write to output file '%s': %s"),
+ as_fatal (_("cannot fill %ld bytes in section %s of %s because: '%s'"),
+ (long)(n_per_buf * fill_size), sec->name,
stdoutput->filename,
bfd_errmsg (bfd_get_error ()));
offset += n_per_buf * fill_size;
}
/* Finish the subsegments. After every sub-segment, we fake an
- ".align ...". This conforms to BSD4.2 brane-damage. We then fake
+ ".align ...". This conforms to BSD4.2 brain-damage. We then fake
".fill 0" because that is the kind of frag that requires least
thought. ".align" frags like to have a following frag since that
makes calculating their intended length trivial. */
of the section. This allows proper nop-filling at the end of
code-bearing sections. */
#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) \
- (!(FRCHAIN)->frch_next ? get_recorded_alignment (SEG) : 0)
+ (!(FRCHAIN)->frch_next && subseg_text_p (SEG) \
+ && !do_not_pad_sections_to_alignment \
+ ? get_recorded_alignment (SEG) \
+ : 0)
#else
#define SUB_SEGMENT_ALIGN(SEG, FRCHAIN) 0
#endif
frchainP != NULL;
frchainP = frchainP->frch_next)
{
- int alignment = 0;
+ int alignment;
subseg_set (s, frchainP->frch_subseg);
/* This now gets called even if we had errors. In that case,
any alignment is meaningless, and, moreover, will look weird
if we are generating a listing. */
- if (!had_errors ())
- {
- alignment = SUB_SEGMENT_ALIGN (now_seg, frchainP);
- if ((bfd_get_section_flags (now_seg->owner, now_seg) & SEC_MERGE)
- && now_seg->entsize)
- {
- unsigned int entsize = now_seg->entsize;
- int entalign = 0;
+ if (had_errors ())
+ do_not_pad_sections_to_alignment = 1;
- while ((entsize & 1) == 0)
- {
- ++entalign;
- entsize >>= 1;
- }
+ alignment = SUB_SEGMENT_ALIGN (now_seg, frchainP);
+ if ((bfd_get_section_flags (now_seg->owner, now_seg) & SEC_MERGE)
+ && now_seg->entsize)
+ {
+ unsigned int entsize = now_seg->entsize;
+ int entalign = 0;
- if (entalign > alignment)
- alignment = entalign;
+ while ((entsize & 1) == 0)
+ {
+ ++entalign;
+ entsize >>= 1;
}
+
+ if (entalign > alignment)
+ alignment = entalign;
}
if (subseg_text_p (now_seg))
#endif
/* From now on, we don't care about sub-segments. Build one frag chain
- for each segment. Linked thru fr_next. */
+ for each segment. Linked through fr_next. */
/* Remove the sections created by gas for its own purposes. */
{
obj_frob_file_after_relocs ();
#endif
+#if defined OBJ_ELF || defined OBJ_MAYBE_ELF
+ if (IS_ELF && flag_use_elf_stt_common)
+ stdoutput->flags |= BFD_CONVERT_ELF_COMMON | BFD_USE_ELF_STT_COMMON;
+#endif
+
/* Once all relocations have been written, we can compress the
contents of the debug sections. This needs to be done before
we start writing any sections, because it will affect the file
layout, which is fixed once we start writing contents. */
if (flag_compress_debug)
- bfd_map_over_sections (stdoutput, compress_debug, (char *) 0);
+ {
+ if (flag_compress_debug == COMPRESS_DEBUG_GABI_ZLIB)
+ stdoutput->flags |= BFD_COMPRESS | BFD_COMPRESS_GABI;
+ else
+ stdoutput->flags |= BFD_COMPRESS;
+ bfd_map_over_sections (stdoutput, compress_debug, (char *) 0);
+ }
bfd_map_over_sections (stdoutput, write_contents, (char *) 0);
}
know (fragP->fr_next);
after = fragP->fr_next->fr_address + stretch;
growth = target - after;
- if (growth < 0)
+
+ /* Growth may be negative, but variable part of frag
+ cannot have fewer than 0 chars. That is, we can't
+ .org backwards. */
+ if (address + fragP->fr_fix > target)
{
growth = 0;
break;
}
- /* Growth may be negative, but variable part of frag
- cannot have fewer than 0 chars. That is, we can't
- .org backwards. */
as_bad_where (fragP->fr_file, fragP->fr_line,
_("attempt to move .org backwards"));
projects / deliverable / binutils-gdb.git / blobdiff