* win32-nat.c: Just rely on CONTEXT_EXTENDED_REGISTER being defined for SSE
[deliverable/binutils-gdb.git] / gdb / ChangeLog
index 4e38baf386effb685cad88d1401d133f1d2e2cb6..147eafb05f049bad7c12bdd80b6298e3c33d2d33 100644 (file)
@@ -1,3 +1,206 @@
+2003-09-13  Christopher Faylor  <cgf@redhat.com>
+
+       * win32-nat.c: Just rely on CONTEXT_EXTENDED_REGISTER being defined for
+       SSE registers since gdb will not operate correctly without this.
+       Restore include file ordering munged in previous change.
+       * config/i386/tm-cygwin.h: Remove HAVE_SSE_REGS define.
+
+2003-09-13  Mark Kettenis  <kettenis@gnu.org>
+
+       * gdbarch.sh (DEPRECATED_REG_STRUCT_HAS_ADDR): Renamed from
+       REG_STRUCT_HAS_ADDR.
+       * gdbarch.c, gdbarch.h: Updated.
+       * infcall.c (call_function_by_hand): Update.
+       * stabsread.c (define_symbol): Updated.
+       
+       * Makefile.in (xm-i386-sv32.h, tm-i386gas.h): Remove.
+
+2003-09-12  Christopher Faylor  <cgf@redhat.com>
+
+       * win32-nat.c: Reorganize so that defines used by target headers are
+       actually defined by the system headers.
+       * config/i386/tm-cygwin.h: Check for CONTEXT_EXTENDED_REGISTERS rather
+       than HAVE_CONTEXT_EXTENDED_REGISTERS, since the latter actually exists.
+
+2003-09-12  Jim Blandy  <jimb@redhat.com>
+
+       * dbxread.c (read_dbx_symtab): Don't report an internal error if
+       the file has no .data, .bss, or .rodata sections.  Instead wait
+       until we see a variable alleged to live in one of those sections.
+
+       * dbxread.c (read_dbx_symtab): If we have no .data section and no
+       .bss section, presume that any variables we find live in the
+       .rodata section.
+
+       * dbxread.c (read_dbx_symtab): Add FIXME about finding section
+       offsets for global and static variables.
+
+       * dbxread.c (read_dbx_symtab): The N_DATA and N_DATA | N_EXT
+       symbol types are, by definition, in the .data section, so it is
+       correct to use SECT_OFF_DATA (objfile) here, not data_sect_index.
+       If there is no .data section, there should be no N_DATA or N_DATA
+       | N_EXT symbols.
+
+2003-09-12  Mark Kettenis  <kettenis@gnu.org>
+
+       * amd64fbsd-tdep.c: Fix sigtramp recognition.
+       (amd64fbsd_sigcontext_addr): Rewrite.
+       (amd64fbsd_sigtramp_start, amd64fbsd_sigtramp_end): Initialize
+       with correct values.
+       (amd64fbsd_sc_reg_offset): Initialize with correct values.
+       (amd64fbsd_init_abi): Fix typo.
+
+2003-09-12  Andrew Cagney  <cagney@redhat.com>
+
+       * ppc-sysv-tdep.c (align_up, align_down): Replace "round2" macro.
+       (ppc_sysv_abi_push_dummy_call): Rewrite, use a two pass loop.
+
+2003-09-12  Andrew Cagney  <cagney@redhat.com>
+
+       * objfiles.h (struct entry_info): Deprecate "entry_file_lowpc" and
+       "entry_file_highpc".  Update comments.
+       * defs.h (deprecated_inside_entry_file): Rename
+       "inside_entry_file".
+       * blockframe.c (deprecated_inside_entry_file): Rename
+       "inside_entry_file".
+       * frame.c (get_prev_frame): Update.  Use if 0 instead of #if 0.
+       * vax-tdep.c (vax_frame_chain): Update.
+       * sh64-tdep.c (sh64_frame_chain): Update.
+       * sh-tdep.c (sh_frame_chain): Update.
+       * rs6000-tdep.c (rs6000_frame_chain): Update.
+       * ns32k-tdep.c (ns32k_frame_chain): Update.
+       * mips-tdep.c (mips_frame_chain): Update.
+       * m68hc11-tdep.c (m68hc11_frame_this_id): Update.
+       * m32r-tdep.c (m32r_frame_this_id): Update.
+       * i386-interix-tdep.c (i386_interix_frame_chain_valid): Update.
+       * frv-tdep.c (frv_frame_this_id): Update.
+       * d10v-tdep.c (d10v_frame_this_id): Update.
+       * cris-tdep.c (cris_frame_chain): Update.
+       * blockframe.c (legacy_frame_chain_valid): Update.
+       * avr-tdep.c (avr_frame_this_id): Update.
+       * arm-tdep.c (arm_prologue_this_id): Update.
+       * alpha-tdep.c (alpha_heuristic_frame_this_id): Update.
+       * objfiles.c (objfile_relocate): Update.
+       * mipsread.c (mipscoff_symfile_read): Update.
+       (mipscoff_symfile_read): Update.
+       * mdebugread.c (parse_partial_symbols): Update.
+       * dwarfread.c (read_file_scope): Update.
+       * dwarf2read.c (read_file_scope): Update.
+       * dbxread.c (read_dbx_symtab): Update.
+       (read_dbx_symtab): Update.
+       * coffread.c (complete_symtab): Update.
+
+2003-09-12  Jeff Johnston  <jjohnstn@redhat.com>
+
+       * top.c (quit_target): New static helper function.
+       (quit_force): Moved code to quit_target().  Call quit_target()
+       via catch_errors() to catch errors during quit.
+
+2003-09-11  David Carlton  <carlton@kealia.com>
+
+       * buildsym.c (finish_block): Use allocate_block to allocate the
+       block.
+       * mdebugread.c (new_block): Add FIXME.
+
+2003-09-11  David Carlton  <carlton@kealia.com>
+
+       * gdbtypes.h: Add TYPE_CODE_NAMESPACE.
+       * gdbtypes.c (init_type): Handle TYPE_CODE_NAMESPACE.
+       (recursive_dump_type): Ditto.
+       * printcmd.c (print_formatted): Ditto.
+       * typeprint.c (print_type_scalar): Ditto.
+       * c-typeprint.c (c_type_print_varspec_prefix): Ditto.
+       (c_type_print_varspec_suffix, c_type_print_base): Ditto.
+       * cp-support.h: Declare cp_check_possible_namespace_symbols,
+       maint_cplus_cmd_list.
+       * cp-support.c: Make maint_cplus_cmd_list extern.
+       * cp-namespace.c: Include objfiles.h, gdbtypes.h, dictionary.h,
+       command.h.
+       (lookup_symbol_file): Look in possible namespace blocks when
+       appropriate.
+       (initialize_namespace_symtab): New.
+       (get_possible_namespace_block, free_namespace_block)
+       (check_possible_namespace_symbols)
+       (check_possible_namespace_symbols_loop)
+       (check_one_possible_namespace_symbol)
+       (lookup_possible_namespace_symbol, maintenance_cplus_namespace)
+       (_initialize_cp_namespace): Ditto.
+       * block.h: Declare allocate_block.
+       * block.c (allocate_block): New.
+       * jv-lang.c (get_java_class_symtab): Allocate blocks via
+       allocate_block.
+       * symfile.h: Update declaration of add_psymbol_to_list.
+       * symfile.c (add_psymbol_to_list): Return the partial symbol in
+       question.
+       * dwarf2read.c (dwarf2_build_psymtabs_hard): Add argument to
+       scan_partial_symbols_call.
+       (scan_partial_symbols): Add NAMESPACE argument; update calls to
+       helper functions.
+       (add_partial_symbol): If necessary, scan mangled names for names
+       of namespaces.
+       (add_partial_namespace): Add NAMESPACE argument; generate partial
+       symbols associated  to namespaces.
+       (add_partial_enumeration): Add NAMESPACE argument.
+       (new_symbol): Allow namespace syms.
+       (read_namespace): Generate namespace syms.
+       * objfiles.h: Add opaque declaration of struct symtab.
+       (struct objfile): Add cp_namespace_symtab member.
+       * objfiles.c (allocate_objfile): Set
+       objfile->cp_namespace_symtab.
+       * Makefile.in (cp-namespace.o): Depend on objfiles_h, gdbtypes_h,
+       dictionary_h, command_h.
+
+2003-09-11  Andrew Cagney  <cagney@redhat.com>
+
+       * rs6000-tdep.c (rs6000_push_dummy_call): Use
+       regcache_raw_write_signed to set SP_REGNUM, move the operation to
+       near the function's end.
+       (rs6000_gdbarch_init): Do not set "deprecated_dummy_write_sp".
+       * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Use
+       regcache_raw_write_signed to set SP_REGNUM.
+
+2003-09-11  Elena Zannoni  <ezannoni@redhat.com>
+
+       * symfile.c (symbol_file_add_with_addrs_or_offsets): Make sure
+       orig_addrs is set up properly.
+
+2003-09-11  Andrew Cagney  <cagney@redhat.com>
+
+       * gdbarch.sh (DEPRECATED_STACK_ALIGN): Rename STACK_ALIGN.
+       * gdbarch.h, gdbarch.c: Re-generate.
+       * infcall.c (call_function_by_hand): Update.
+       * hppa-tdep.c (hppa_push_arguments): Update.
+       * ada-lang.c (place_on_stack): Update.
+       * xstormy16-tdep.c (xstormy16_gdbarch_init): Update.
+       * sparc-tdep.c (sparc_gdbarch_init): Update.
+       * m68hc11-tdep.c (m68hc11_gdbarch_init): Update.
+       * hppa-tdep.c (hppa_gdbarch_init): Update.
+       * h8300-tdep.c (h8300_gdbarch_init): Delete comment refering to
+       stack_align.
+
+2003-09-11  Daniel Jacobowitz  <drow@mvista.com>
+
+       * dwarf2loc.c (dwarf2_loc_desc_needs_frame): Variables in a
+       register do need a frame.
+
+2003-09-11  Andrew Cagney  <cagney@redhat.com>
+
+       Since the IRIX 4 configuration was forcing K&R mode it hasn't been
+       buildable since GDB 5.0.
+       * NEWS: Mention that IRIX 3 and IRIX 4 support were removed.
+       * configure.host: Delete "mips-sgi-irix3*" and "mips-sgi-irix4*".
+       * configure.tgt: Delete "mips*-sgi-*" a.k.a. irix3.
+       * irix4-nat.c: Delete file.
+       * config/mips/irix4.mh: Delete file.
+       * config/mips/irix3.mh: Delete file.
+       * config/mips/irix3.mt: Delete file.
+       * config/mips/tm-irix3.h: Delete file.
+       * config/mips/nm-irix3.h: Delete file.
+       * config/mips/xm-irix3.h: Delete file.
+       * config/mips/nm-irix4.h: Delete file.
+       * config/mips/xm-irix4.h: Delete file.
+       * config/mips/tm-irix5.h: Inline contents of "tm-irix3.h".
+
 2003-09-10  J. Brobecker  <brobecker@gnat.com>
 
        * hppa-tdep.c: Include "dis-asm.h". Fixes a build failure.
@@ -5,7 +208,8 @@
 
 2003-09-10  James E Wilson  <wilson@specifixinc.com>
 
-       * MAINTAINERS: Change my e-mail address.
+       * MAINTAINERS: Change my e-mail address.  Move to paper trail
+       section.
 
 2003-09-10  Kevin Buettner  <kevinb@redhat.com>
 
This page took 0.026465 seconds and 4 git commands to generate.