* win32-nat.c: Just rely on CONTEXT_EXTENDED_REGISTER being defined for SSE
[deliverable/binutils-gdb.git] / gdb / ChangeLog
index 5deee39ea18eb83df6e4ce6d0a82f1ffc30e117d..147eafb05f049bad7c12bdd80b6298e3c33d2d33 100644 (file)
@@ -1,3 +1,616 @@
+2003-09-13  Christopher Faylor  <cgf@redhat.com>
+
+       * win32-nat.c: Just rely on CONTEXT_EXTENDED_REGISTER being defined for
+       SSE registers since gdb will not operate correctly without this.
+       Restore include file ordering munged in previous change.
+       * config/i386/tm-cygwin.h: Remove HAVE_SSE_REGS define.
+
+2003-09-13  Mark Kettenis  <kettenis@gnu.org>
+
+       * gdbarch.sh (DEPRECATED_REG_STRUCT_HAS_ADDR): Renamed from
+       REG_STRUCT_HAS_ADDR.
+       * gdbarch.c, gdbarch.h: Updated.
+       * infcall.c (call_function_by_hand): Update.
+       * stabsread.c (define_symbol): Updated.
+       
+       * Makefile.in (xm-i386-sv32.h, tm-i386gas.h): Remove.
+
+2003-09-12  Christopher Faylor  <cgf@redhat.com>
+
+       * win32-nat.c: Reorganize so that defines used by target headers are
+       actually defined by the system headers.
+       * config/i386/tm-cygwin.h: Check for CONTEXT_EXTENDED_REGISTERS rather
+       than HAVE_CONTEXT_EXTENDED_REGISTERS, since the latter actually exists.
+
+2003-09-12  Jim Blandy  <jimb@redhat.com>
+
+       * dbxread.c (read_dbx_symtab): Don't report an internal error if
+       the file has no .data, .bss, or .rodata sections.  Instead wait
+       until we see a variable alleged to live in one of those sections.
+
+       * dbxread.c (read_dbx_symtab): If we have no .data section and no
+       .bss section, presume that any variables we find live in the
+       .rodata section.
+
+       * dbxread.c (read_dbx_symtab): Add FIXME about finding section
+       offsets for global and static variables.
+
+       * dbxread.c (read_dbx_symtab): The N_DATA and N_DATA | N_EXT
+       symbol types are, by definition, in the .data section, so it is
+       correct to use SECT_OFF_DATA (objfile) here, not data_sect_index.
+       If there is no .data section, there should be no N_DATA or N_DATA
+       | N_EXT symbols.
+
+2003-09-12  Mark Kettenis  <kettenis@gnu.org>
+
+       * amd64fbsd-tdep.c: Fix sigtramp recognition.
+       (amd64fbsd_sigcontext_addr): Rewrite.
+       (amd64fbsd_sigtramp_start, amd64fbsd_sigtramp_end): Initialize
+       with correct values.
+       (amd64fbsd_sc_reg_offset): Initialize with correct values.
+       (amd64fbsd_init_abi): Fix typo.
+
+2003-09-12  Andrew Cagney  <cagney@redhat.com>
+
+       * ppc-sysv-tdep.c (align_up, align_down): Replace "round2" macro.
+       (ppc_sysv_abi_push_dummy_call): Rewrite, use a two pass loop.
+
+2003-09-12  Andrew Cagney  <cagney@redhat.com>
+
+       * objfiles.h (struct entry_info): Deprecate "entry_file_lowpc" and
+       "entry_file_highpc".  Update comments.
+       * defs.h (deprecated_inside_entry_file): Rename
+       "inside_entry_file".
+       * blockframe.c (deprecated_inside_entry_file): Rename
+       "inside_entry_file".
+       * frame.c (get_prev_frame): Update.  Use if 0 instead of #if 0.
+       * vax-tdep.c (vax_frame_chain): Update.
+       * sh64-tdep.c (sh64_frame_chain): Update.
+       * sh-tdep.c (sh_frame_chain): Update.
+       * rs6000-tdep.c (rs6000_frame_chain): Update.
+       * ns32k-tdep.c (ns32k_frame_chain): Update.
+       * mips-tdep.c (mips_frame_chain): Update.
+       * m68hc11-tdep.c (m68hc11_frame_this_id): Update.
+       * m32r-tdep.c (m32r_frame_this_id): Update.
+       * i386-interix-tdep.c (i386_interix_frame_chain_valid): Update.
+       * frv-tdep.c (frv_frame_this_id): Update.
+       * d10v-tdep.c (d10v_frame_this_id): Update.
+       * cris-tdep.c (cris_frame_chain): Update.
+       * blockframe.c (legacy_frame_chain_valid): Update.
+       * avr-tdep.c (avr_frame_this_id): Update.
+       * arm-tdep.c (arm_prologue_this_id): Update.
+       * alpha-tdep.c (alpha_heuristic_frame_this_id): Update.
+       * objfiles.c (objfile_relocate): Update.
+       * mipsread.c (mipscoff_symfile_read): Update.
+       (mipscoff_symfile_read): Update.
+       * mdebugread.c (parse_partial_symbols): Update.
+       * dwarfread.c (read_file_scope): Update.
+       * dwarf2read.c (read_file_scope): Update.
+       * dbxread.c (read_dbx_symtab): Update.
+       (read_dbx_symtab): Update.
+       * coffread.c (complete_symtab): Update.
+
+2003-09-12  Jeff Johnston  <jjohnstn@redhat.com>
+
+       * top.c (quit_target): New static helper function.
+       (quit_force): Moved code to quit_target().  Call quit_target()
+       via catch_errors() to catch errors during quit.
+
+2003-09-11  David Carlton  <carlton@kealia.com>
+
+       * buildsym.c (finish_block): Use allocate_block to allocate the
+       block.
+       * mdebugread.c (new_block): Add FIXME.
+
+2003-09-11  David Carlton  <carlton@kealia.com>
+
+       * gdbtypes.h: Add TYPE_CODE_NAMESPACE.
+       * gdbtypes.c (init_type): Handle TYPE_CODE_NAMESPACE.
+       (recursive_dump_type): Ditto.
+       * printcmd.c (print_formatted): Ditto.
+       * typeprint.c (print_type_scalar): Ditto.
+       * c-typeprint.c (c_type_print_varspec_prefix): Ditto.
+       (c_type_print_varspec_suffix, c_type_print_base): Ditto.
+       * cp-support.h: Declare cp_check_possible_namespace_symbols,
+       maint_cplus_cmd_list.
+       * cp-support.c: Make maint_cplus_cmd_list extern.
+       * cp-namespace.c: Include objfiles.h, gdbtypes.h, dictionary.h,
+       command.h.
+       (lookup_symbol_file): Look in possible namespace blocks when
+       appropriate.
+       (initialize_namespace_symtab): New.
+       (get_possible_namespace_block, free_namespace_block)
+       (check_possible_namespace_symbols)
+       (check_possible_namespace_symbols_loop)
+       (check_one_possible_namespace_symbol)
+       (lookup_possible_namespace_symbol, maintenance_cplus_namespace)
+       (_initialize_cp_namespace): Ditto.
+       * block.h: Declare allocate_block.
+       * block.c (allocate_block): New.
+       * jv-lang.c (get_java_class_symtab): Allocate blocks via
+       allocate_block.
+       * symfile.h: Update declaration of add_psymbol_to_list.
+       * symfile.c (add_psymbol_to_list): Return the partial symbol in
+       question.
+       * dwarf2read.c (dwarf2_build_psymtabs_hard): Add argument to
+       scan_partial_symbols_call.
+       (scan_partial_symbols): Add NAMESPACE argument; update calls to
+       helper functions.
+       (add_partial_symbol): If necessary, scan mangled names for names
+       of namespaces.
+       (add_partial_namespace): Add NAMESPACE argument; generate partial
+       symbols associated  to namespaces.
+       (add_partial_enumeration): Add NAMESPACE argument.
+       (new_symbol): Allow namespace syms.
+       (read_namespace): Generate namespace syms.
+       * objfiles.h: Add opaque declaration of struct symtab.
+       (struct objfile): Add cp_namespace_symtab member.
+       * objfiles.c (allocate_objfile): Set
+       objfile->cp_namespace_symtab.
+       * Makefile.in (cp-namespace.o): Depend on objfiles_h, gdbtypes_h,
+       dictionary_h, command_h.
+
+2003-09-11  Andrew Cagney  <cagney@redhat.com>
+
+       * rs6000-tdep.c (rs6000_push_dummy_call): Use
+       regcache_raw_write_signed to set SP_REGNUM, move the operation to
+       near the function's end.
+       (rs6000_gdbarch_init): Do not set "deprecated_dummy_write_sp".
+       * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Use
+       regcache_raw_write_signed to set SP_REGNUM.
+
+2003-09-11  Elena Zannoni  <ezannoni@redhat.com>
+
+       * symfile.c (symbol_file_add_with_addrs_or_offsets): Make sure
+       orig_addrs is set up properly.
+
+2003-09-11  Andrew Cagney  <cagney@redhat.com>
+
+       * gdbarch.sh (DEPRECATED_STACK_ALIGN): Rename STACK_ALIGN.
+       * gdbarch.h, gdbarch.c: Re-generate.
+       * infcall.c (call_function_by_hand): Update.
+       * hppa-tdep.c (hppa_push_arguments): Update.
+       * ada-lang.c (place_on_stack): Update.
+       * xstormy16-tdep.c (xstormy16_gdbarch_init): Update.
+       * sparc-tdep.c (sparc_gdbarch_init): Update.
+       * m68hc11-tdep.c (m68hc11_gdbarch_init): Update.
+       * hppa-tdep.c (hppa_gdbarch_init): Update.
+       * h8300-tdep.c (h8300_gdbarch_init): Delete comment refering to
+       stack_align.
+
+2003-09-11  Daniel Jacobowitz  <drow@mvista.com>
+
+       * dwarf2loc.c (dwarf2_loc_desc_needs_frame): Variables in a
+       register do need a frame.
+
+2003-09-11  Andrew Cagney  <cagney@redhat.com>
+
+       Since the IRIX 4 configuration was forcing K&R mode it hasn't been
+       buildable since GDB 5.0.
+       * NEWS: Mention that IRIX 3 and IRIX 4 support were removed.
+       * configure.host: Delete "mips-sgi-irix3*" and "mips-sgi-irix4*".
+       * configure.tgt: Delete "mips*-sgi-*" a.k.a. irix3.
+       * irix4-nat.c: Delete file.
+       * config/mips/irix4.mh: Delete file.
+       * config/mips/irix3.mh: Delete file.
+       * config/mips/irix3.mt: Delete file.
+       * config/mips/tm-irix3.h: Delete file.
+       * config/mips/nm-irix3.h: Delete file.
+       * config/mips/xm-irix3.h: Delete file.
+       * config/mips/nm-irix4.h: Delete file.
+       * config/mips/xm-irix4.h: Delete file.
+       * config/mips/tm-irix5.h: Inline contents of "tm-irix3.h".
+
+2003-09-10  J. Brobecker  <brobecker@gnat.com>
+
+       * hppa-tdep.c: Include "dis-asm.h". Fixes a build failure.
+       * Makefile.in (hppa-tdep.o): Update dependencies.
+
+2003-09-10  James E Wilson  <wilson@specifixinc.com>
+
+       * MAINTAINERS: Change my e-mail address.  Move to paper trail
+       section.
+
+2003-09-10  Kevin Buettner  <kevinb@redhat.com>
+
+       * MAINTAINERS (frv): New ISA entry.
+
+2003-09-10  Kevin Buettner  <kevinb@redhat.com>
+
+       * frv-tdep.c (dis-asm.h): Include.
+       * Makefile.in (frv-tdep.o): Update dependencies.
+
+2003-09-09  Jeff Johnston  <jjohnstn@redhat.com>
+
+       * ia64-tdep.c (ia64_sigtramp_frame_init_saved_regs):
+       Fix typo for high range of floating registers.
+
+2003-09-09  David Carlton  <carlton@kealia.com>
+
+       * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and
+       highpc initialization here out of scan_partial_symbols.
+       (scan_partial_symbols): Restructure into a recursive version,
+       calling add_partial_namespace and add_partial_enumeration when
+       appropriate.
+       (add_partial_namespace): New.
+       (add_partial_enumeration, locate_pdi_sibling): Ditto.
+
+2003-09-09  Andrew Cagney  <cagney@redhat.com>
+
+       * rs6000-tdep.c (ppc_push_return_address): Delete function.
+       (rs6000_push_dummy_call): Set LR to BP_ADDR.
+       (rs6000_gdbarch_init): Do not set deprecated_push_return_address.
+       * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Ditto.
+
+       * rs6000-tdep.c (rs6000_fix_call_dummy): Delete function.
+       (rs6000_push_dummy_call): Set the "TOC" register.
+
+       * rs6000-tdep.c (rs6000_gdbarch_init): Do not set the deprecated
+       methods "max_register_raw_size", "max_register_virtual_size" or
+       "register_virtual_size".
+
+2003-09-09  Ian Lance Taylor  <ian@wasabisystems.com>
+
+       * MAINTAINERS: Update my e-mail address.
+
+2003-09-09  Andrew Cagney  <cagney@redhat.com>
+
+       * rs6000-tdep.c (rs6000_store_struct_return): Delete function.
+       (rs6000_push_dummy_call): Store the struct return address.
+       * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Ditto.
+
+2003-09-09  Andrew Cagney  <cagney@redhat.com>
+
+       * ppc-tdep.h (ppc_sysv_abi_push_dummy_call): Replace
+       "ppc_sysv_abi_push_arguments".
+       * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Replace
+       "ppc_sysv_abi_push_arguments".
+       * rs6000-tdep.c (rs6000_gdbarch_init): Set "push_dummy_call"
+       instead of "push_arguments".
+       (rs6000_push_dummy_call): Replace "rs6000_push_arguments".
+
+2003-09-09  Andrew Cagney  <cagney@redhat.com>
+
+       * sh64-tdep.c (sh64_push_return_address): Use ENTRY_POINT_ADDRESS
+       instead of CALL_DUMMY_ADDRESS.
+
+2003-09-09  Paul N. Hilfinger  <hilfingr@gnat.com>
+
+       * p-lang.c: Eliminate "register".
+       * c-lang.c: Ditto.
+       * expprint.c: Ditto.
+       * f-lang.c: Ditto.
+       * jv-lang.c: Ditto.
+       * language.c: Ditto.
+       * m2-lang.c: Ditto.
+       * parse.c: Ditto.
+       * scm-lang.c: Ditto.
+       * objc-lang.c: Ditto.
+
+2003-09-09  Nick Clifton  <nickc@redhat.com>
+
+       * v850-tdep.c (v850_processor_type_table): Add bfd_mach_v850e1.
+
+2003-09-04  Andrew Cagney  <cagney@redhat.com>
+
+       * avr-tdep.c: Include "dis-asm.h".
+       * cris-tdep.c: Include "dis-asm.h".
+       (cris_delayed_get_disassembler): Use "struct disassemble_info"
+       instead of corresponding typedef.
+       * h8300-tdep.c: Include "dis-asm.h".
+       * ia64-tdep.c: Include "dis-asm.h".
+       * i386-tdep.c: Include "dis-asm.h".
+       (i386_print_insn): Use "struct disassemble_info" instead of
+       corresponding typedef.
+       * m68k-tdep.c: Include "dis-asm.h".
+       * mcore-tdep.c: Include "dis-asm.h".
+       * mips-tdep.c: Include "dis-asm.h".
+       (gdb_print_insn_mips): Make static, use "struct disassemble_info"
+       instead of corresponding typedef.
+       * ns32k-tdep.c: Include "dis-asm.h".
+       * s390-tdep.c: Include "dis-asm.h".
+       * sparc-tdep.c: Include "dis-asm.h".
+       * vax-tdep.c: Include "dis-asm.h".
+       * v850-tdep.c: Include "dis-asm.h".
+       * mn10300-tdep.c: Include "dis-asm.h".
+       * rs6000-tdep.c: Include "dis-asm.h".
+       * xstormy16-tdep.c: Include "dis-asm.h".
+       (_initialize_xstormy16_tdep): Delete "extern" declaration of
+       print_insn_xstormy16.
+       * Makefile.in (v850-tdep.o): Update dependencies.
+       (vax-tdep.o, sparc-tdep.o, s390-tdep.o): Ditto.
+       (ns32k-tdep.o, mips-tdep.o, mcore-tdep.o): Ditto.
+       (m68k-tdep.o, ia64-tdep.o, i386-tdep.o): Ditto.
+       (h8300-tdep.o, cris-tdep.o, avr-tdep.o): Ditto.
+       (mn10300-tdep.o, xstormy16-tdep.o, disasm.o): Ditto.
+       (gdbarch_h): Remove $(dis_asm_h).
+       * disasm.c: Include "dis-asm.h".
+       (dis_asm_read_memory): Use "struct disassemble_info" instead of
+       corresponding typedef.
+       (dis_asm_memory_error, dump_insns, do_assembly_only): Ditto.
+       (gdb_disassemble_info, gdb_disassembly, gdb_print_insn): Ditto.
+       * gdbarch.sh: Do not include "dis-asm.h".
+       (struct disassemble_info): Declare opaque.
+       (TARGET_PRINT_INSN): Update declaration.
+       * gdbarch.h, gdbarch.c: Re-generate.
+
+2003-09-08  Andrew Cagney  <cagney@redhat.com>
+
+       * gdbarch.sh (DEPRECATED_CALL_DUMMY_ADDRESS): Rename
+       CALL_DUMMY_ADDRESS, change to a predicate.
+       * gdbarch.h, gdbarch.c: Re-generate.
+       * blockframe.c (deprecated_pc_in_call_dummy_at_entry_point):
+       Use either DEPRECATED_CALL_DUMMY_ADDRESS or entry_point_address.
+       * infcall.c (call_function_by_hand): Ditto.
+       * sparc-tdep.c (sparc_push_return_address): Ditto.
+       (sparc_gdbarch_init): Set deprecated_call_dummy_address.
+       * xstormy16-tdep.c (xstormy16_push_return_address): Replace
+       CALL_DUMMY_ADDRESS with entry_point_address.
+       * v850-tdep.c (v850_push_return_address): Ditto.
+       * s390-tdep.c (s390_push_return_address): Ditto.
+       * rs6000-tdep.c (ppc_push_return_address): Ditto.
+       * mn10300-tdep.c (mn10300_push_return_address): Ditto.
+       * mcore-tdep.c (mcore_push_return_address): Ditto.
+       * cris-tdep.c (cris_push_return_address): Ditto.
+       * arm-tdep.c (arm_push_return_address): Ditto.
+
+2003-09-08  Andrew Cagney  <cagney@redhat.com>
+
+       * dwarf2-frame.c (enum dwarf2_reg_rule): New, replace anonymous
+       enum.  Add REG_UNSPECIFIED, rename REG_UNSAVED to REG_UNDEFINED
+       and REG_UNMODIFIED to REG_SAME_VALUE.
+       (execute_cfa_program): Update.
+       (dwarf2_frame_cache): Update.  Initialize table to
+       REG_UNSPECIFIED, complain if CFI fails to specify a register's
+       location.
+       (dwarf2_frame_prev_register): Update.  Handle REG_UNSPECIFIED.
+
+2003-09-08  Andrew Cagney  <cagney@redhat.com>
+
+       * gnu-nat.c: Remove "inline" function attribute.
+       * alpha-tdep.c, ppc-linux-tdep.c, macroexp.c: Ditto.
+
+2003-09-08  Kevin Buettner  <kevinb@redhat.com>
+
+       * config/frv/frv.mt (SIM_OBS, SIM): Enable simulator for FR-V
+       target.
+
+2003-09-08  Kevin Buettner  <kevinb@redhat.com>
+
+       * frv-tdep.c (frame-unwind.h, frame-base.h): Include.
+       (frame_extra_info): Rename this struct to frv_unwind_cache.
+       Delete fields ``fp_to_callers_sp_offset'' and ``lr_saved_on_stack''.
+       Add fields ``prev_sp'' and ``base''.
+       (frv_frame_chain, frv_frame_saved_pc, frv_frame_init_saved_regs)
+       (frv_saved_pc_after_call, frv_init_extra_frame_info)
+       (frv_push_return_address, frv_pop_frame, frv_pop_frame_regular):
+       Delete.
+       (frv_analyze_prologue): Add ``struct frv_unwind_cache *'' argument.
+       Revise all callers.  Fill in the unwind cache argument and make
+       other adjustments to account for new frame mechanisms.
+       (frv_frame_unwind_cache, frv_frame_align, frv_unwind_pc)
+       (frv_frame_this_id, frv_frame_prev_register, frv_frame_sniffer)
+       (frv_frame_base_address, frv_unwind_dummy_id): New functions.
+       (frv_frame_unwind, frv_frame_base): New structs.
+       (frv_push_arguments): Change name to frv_push_dummy_call().  Add
+       additional arguments expected by this method and adjust function
+       body accordingly.
+       (frv_gdbarch_init): Remove calls to the following functions:
+       set_gdbarch_deprecated_init_frame_pc(),
+       set_gdbarch_deprecated_saved_pc_after_call(),
+       set_gdbarch_deprecated_frame_chain(),
+       set_gdbarch_deprecated_frame_saved_pc(),
+       set_gdbarch_deprecated_frame_init_saved_regs(),
+       set_gdbarch_deprecated_push_arguments(),
+       set_gdbarch_deprecated_push_return_address(),
+       set_gdbarch_deprecated_pop_frame(),
+       set_gdbarch_deprecated_call_dummy_words(),
+       set_gdbarch_deprecated_sizeof_call_dummy_words(),
+       set_gdbarch_deprecated_init_extra_frame_info(),
+       set_gdbarch_deprecated_dummy_write_sp(), and
+       set_gdbarch_deprecated_pc_in_call_dummy().
+       Add calls to the following functions:
+       set_gdbarch_unwind_pc(), set_gdbarch_unwind_sp(),
+       set_gdbarch_frame_align(), frame_unwind_append_sniffer(), and
+       frame_base_set_default().
+       * Makefile.in (frv-tdep.o): Update dependencies.
+       
+2003-09-09  Mark Kettenis  <kettenis@gnu.org>
+
+       * dwarf2-frame.c (read_encoded_value): Add support for
+       DW_EH_PE_aligned encoding.
+
+2003-09-08  Daniel Jacobowitz  <drow@mvista.com>
+
+       * infrun.c (normal_stop): Don't print a message if the inferior
+       has exited.
+
+2003-09-08  Jim Blandy  <jimb@redhat.com>
+
+       * Makefile.in (dbxread.o): Note new dependency on $(gdb_assert_h).
+       * dbxread.c: #include "gdb_assert.h".
+       (read_dbx_symtab): If the objfile has no .data section, use the
+       section index for the .bss section instead.
+
+2003-09-08  Daniel Jacobowitz  <drow@mvista.com>
+
+       * frame.c (deprecated_safe_get_selected_frame): New function.
+       * frame.h (deprecated_safe_get_selected_frame): Add prototype.
+       * findvar.c (read_var_value): Call it.
+
+2003-09-08  Corinna Vinschen  <vinschen@redhat.com>
+
+       * Makefile.in (ALLDEPFILES): Add sh64-tdep.c.
+       (sh64-tdep.o): Add dependencies.
+       * configure.tgt: Add FIXME to sh-*-linux*.
+       * sh-tdep.c: Move sh64 support to sh64-tdep.c.
+       (sh_gdbarch_init): Always set correct sh_show_regs function
+       pointer.  Call sh64_gdbarch_init() if machine type is sh5. 
+       * sh-tdep.h: Move sh64 support to sh64-tdep.c.
+       * sh64-tdep.c: New file, containing all sh64 related code from
+       sh-tdep.c.
+       * config/sh/embed.mt (TDEPFILES): Add sh64-tdep.o.
+       * config/sh/linux.mt (TDEPFILES): Ditto.
+       * config/sh/nbsd.mt (TDEPFILES): Ditto. 
+       * config/sh/tm-sh.h: Drop REGISTER_TYPE definition.
+       * config/sh/wince.mt (TDEPFILES): Ditto.
+
+2003-09-07  Daniel Jacobowitz  <drow@mvista.com>
+
+       * lin-lwp.c (detach_callback): Don't call stop_wait_callback.
+       (stop_wait_callback): Handle !lp->signalled also.
+       (lin_lwp_has_pending, flush_callback): New functions.
+       (lin_lwp_wait): Call flush_callback.
+       * linux-proc.c (linux_proc_add_line_to_sigset): New function.
+       (linux_proc_pending_signals): New function.
+       * linux-nat.h (linux_proc_pending_signals): Add prototype.
+
+2003-09-07  Daniel Jacobowitz  <drow@mvista.com>
+
+       From Nick Kelsey <nickk@ubicom.com>:
+       * infrun.c (handle_inferior_event): Check IN_SOLIB_RETURN_TRAMPOLINE
+       when the stop PC is at the beginning of a function also.
+
+2003-09-06  Daniel Jacobowitz  <drow@mvista.com>
+
+       * arm-linux-tdep.c (arm_linux_arm_be_breakpoint): New.
+       (arm_linux_init_abi): Use arm_linux_arm_be_breakpoint.
+
+2003-09-06  Mark Kettenis  <kettenis@gnu.org>
+
+       * sol-thread.c: Include "gdb_string.h".
+
+2003-09-03  Mark Kettenis  <m.kettenis@osp.nl>
+
+       * gcore.c: Reorder include files in alphabetical order.  Include
+       "gdb_assert.h".  Various coding style fixes.
+       (derive_stack_segment, derive_heap_segment): Replace check for
+       non-null BOTTOM and TOP with gdb_assert.
+       (derive_heap_segment): Replace check for successful creation of
+       ZERO with gdb_assert.
+       (make_mem_sec): Use bfd_section_lma to set OSEC->lma.
+
+2003-09-04  Andrew Cagney  <cagney@redhat.com>
+
+       * thread-db.c (verbose_dlsym): New function.
+       (thread_db_load): Use verbose_dlsym
+       (thread_db_new_objfile): Print that libthread_db was loaded, and
+       that thread debugging was enabled.
+
+2003-09-04  Andrew Cagney  <cagney@redhat.com>
+
+       * configure.tgt: Add "mips64*-*-*" target.  Delete
+       mips64*el-*-ecoff*, mips64*el-*-elf*, mips*el-*-ecoff*,
+       mips*el-*-elf*, mips*-*-lnews*, mips*-*-sysv*, mips*-*-riscos*,
+       mips*-*-ecoff*, mips*-*-elf*, mips*-little-*, mips*-big-*,
+       mips*-dec-*, mips64*-big-*, mips64*vr*-*-elf*, mips64*-*-ecoff*,
+       mips*-sony-*, and mips64*-*-elf* targets.
+       * config/mips/embedl.mt: Delete file.
+       * config/mips/embedl64.mt: Delete file.
+       * config/mips/mips.mt: Delete file.
+       * config/mips/mips64.mt: Delete file.
+       * config/mips/tm-embed.h: Delete file.
+       * config/mips/embed.mt (TM_FILE): Set to "tm-mips.h".
+       * config/mips/embed64.mt: Delete out-of-date comment.
+
+2003-09-04  Andrew Cagney  <cagney@redhat.com>
+
+       * hppa-tdep.c (hppa_gdbarch_init): Set
+       "have_nonsteppable_watchpoint".
+       * config/pa/nm-hppah.h (HAVE_NONSTEPPABLE_WATCHPOINT): Delete.
+       * mips-tdep.c (mips_dump_tdep): Do not print
+       HAVE_NONSTEPPABLE_WATCHPOINT.
+       (mips_gdbarch_init): Set "have_nonsteppable_watchpoint".
+       * config/mips/tm-embed.h (HAVE_NONSTEPPABLE_WATCHPOINT): Delete.
+       * config/mips/nm-irix5.h (HAVE_NONSTEPPABLE_WATCHPOINT): Delete.
+       * config/mips/nm-irix4.h (HAVE_NONSTEPPABLE_WATCHPOINT): Delete.
+
+2003-09-04  Corinna Vinschen  <vinschen@redhat.com>
+
+       * breakpoint.c (watchpoint_check): Remove accidentally checked in
+       unused code.  Add comment.
+
+2003-09-04  Corinna Vinschen  <vinschen@redhat.com>
+
+       * breakpoint.c (watchpoint_check): Check for pc being in an
+       epilogue if watchpoint frame couldn't be found.
+
+2003-09-04  Andrew Cagney  <cagney@redhat.com>
+
+       * Makefile.in: Re-generate all dependencies.
+
+2003-09-03  Andrew Cagney  <cagney@redhat.com>
+
+       * arch-utils.h (legacy_print_insn): Delete declaration.
+       * arch-utils.c (legacy_print_insn): Delete function.
+       * disasm.c (deprecated_tm_print_insn_info): Delete.
+       (_initialize_disasm): Delete function, contained code initializing
+       deprecated_tm_print_insn_info.
+       * gdbarch.sh (deprecated_tm_print_insn): Delete.
+       (deprecated_tm_print_insn_info): Delete.
+       (TARGET_PRINT_INSN): Do not provide a default.
+       * gdbarch.h, gdbarch.c: Re-generate.
+
+2003-09-03  Andrew Cagney  <cagney@redhat.com>
+
+       * disasm.c (fprintf_disasm): New function.
+       (gdb_disassemble_info): Call "init_disassemble_info", instead of
+       INIT_DISASSEMBLE_INFO_NO_ARCH.  Do not initialize "insn_sets",
+       reverts 2003-08-14 change.
+       (_initialize_disasm): Call "init_disassemble_info", instead of
+       INIT_DISASSEMBLE_INFO_NO_ARCH.
+
+2003-09-03  Michael Snyder  <msnyder@redhat.com>
+
+       * config/djgpp/fnchange.lst: Fix up sim/frv/profile-fr*.[ch].
+
+2003-09-03  Andrew Cagney  <cagney@redhat.com>
+
+       * config/rs6000/tm-rs6000.h (IBM6000_TARGET): Delete definition.
+       * config/rs6000/nm-rs6000.h (DEPRECATED_IBM6000_TARGET): Define.
+       * symfile.c (syms_from_objfile): Update.
+       (reread_symbols): `Update
+       * exec.c (exec_file_attach): Update.
+       (exec_file_attach): Update.
+       * config/powerpc/tm-nbsd.h: Delete #undef IBM6000_TARGET, revert
+       2003-08-29 change.
+       * config/powerpc/tm-linux.h: Delete #undef IBM6000_TARGET.
+
+2003-09-03  Daniel Jacobowitz  <drow@mvista.com>
+
+       * arm-tdep.c: Include frame-unwind.h, frame-base.h, and
+       trad-frame.h.
+       (arm_get_cache): Delete macro.
+       (struct arm_prologue_cache): Update comments.  Make saved_regs into
+       a trad_frame_saved_reg pointer.  Remove unwound_pc; rename unwound_sp
+       to prev_sp.
+       (thumb_scan_prologue): Update for cache changes.  Don't call
+       DEPRECATED_PC_IN_CALL_DUMMY.
+       (arm_scan_prologue): Update for cache changes.  Take NEXT_FRAME
+       argument and use it in desperation search for our prologue.  Do not
+       search past the specified PC.
+       (arm_make_prologue_cache): Simplify.
+
+       (arm_prologue_this_id, arm_prologue_prev_register)
+       (arm_prologue_unwind, arm_prologue_unwind_sniffer)
+       (arm_normal_frame_base, arm_normal_base, arm_make_sigtramp_cache)
+       (arm_sigtramp_this_id, arm_sigtramp_prev_register)
+       (arm_sigtramp_unwind, arm_sigtramp_unwind_sniffer)
+       (arm_unwind_dummy_id, arm_unwind_pc, arm_unwind_sp): New.
+
+       (arm_frame_chain_valid, arm_find_callers_reg)
+       (arm_frame_saved_pc, arm_read_fp, arm_frame_init_saved_regs)
+       (arm_pop_frame): Delete obsolete methods.
+       (arm_minimal_frame_chain, arm_minimal_frame_info): Delete.
+
+       (arm_gdbarch_init): Update for new frame methods.  Register prologue
+       and sigtramp unwinders.  Set the default frame base method.
+
+       * Makefile.in (arm-tdep.o): Update dependencies.
+       * varobj.c (find_frame_addr_in_frame_chain): Call
+       get_frame_base_address.
+       * std-regs.c (value_of_builtin_frame_fp_reg): Likewise.
+
 2003-09-03  Daniel Jacobowitz  <drow@mvista.com>
 
        * arm-tdep.c (arm_minimal_frame_chain): Renamed from
This page took 0.030058 seconds and 4 git commands to generate.