+Wed Nov 29 13:35:18 1995 Per Bothner <bothner@kalessin.cygnus.com>
+
+ * expression.h (enum exp_opcode): Add BINOP_RANGE.
+ * expprint.c (dump_expression): Support BINOP_RANGE.
+ * eval.c (evaluate_subexp_standard): Handle BINOP_RANGE (as error).
+ (case MULTI_SUBSCRIPT): Fix broken f77 value->int ad hoc conversion.
+ * ch-lang.c (chill_op_print_tab): Support BINOP_RANGE.
+ (evaluate_subexp_chill): Error on BINOP_COMMA.
+
+ * Makefile.in: Clean up so doc stuff stays in doc sub-dir.
+
+Wed Nov 29 16:39:50 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * monitor.c (monitor_debug): New function to print monitor debug
+ output in printable fashion.
+ (monitor_printf{,_noecho}): Call monitor_debug instead of
+ fputs_unfiltered.
+
+ * srec.c (load_srec): When printing srec debug information, do not
+ print the carriage return directly, instead print \\r followed by
+ a newline.
+
+Tue Nov 28 15:25:28 1995 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in (target_subdir): Define.
+ (CC_FOR_TARGET, CXX_FOR_TARGET): Use it to find target libraries.
+ * configure.in (X_CFLAGS): Fix typo.
+ (target_subdir): Set to "${target_alias}/" if cross.
+ * configure: Regenerated.
+
+ * dbxread.c (dbx_symfile_read): Set block_address_function_relative
+ for `pe' format files.
+
+Tue Nov 28 11:17:47 1995 Fred Fish <fnf@cygnus.com>
+
+ * magic.h: Renamed to gmagic.h to avoid <magic.h> conflict.
+ * magic.c: Renamed to gmagic.c in sympathy.
+ * eval.c, gmagic.c, config/tm-magic.h:
+ Include "gmagic.h" rather than "magic.h".
+
+Sat Nov 25 02:56:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * mdebugread.c (handle_psymbol_enumerators, parse_symbol):
+ Recognize enums from alpha cc -migrate.
+ (upgrade_type): Pass correct fd to parse_symbol when parsing
+ the index type of an array.
+ (parse_procedure, parse_lines, psymtab_to_symtab_1): Handle
+ unsorted procedure descriptors from Irix 5.x and Alpha OSF/1-3.x
+ shared libraries. Use CORE_ADDR instead of `unsigned long' in
+ procedure descriptor address computations.
+
+ * symtab.c (decode_line_1): Prevent accidental strchr match
+ of a null character with the terminating null character of
+ gdb_completer_quote_characters.
+ (cplusplus_hint): Make sure that only a single quote is printed
+ in the hint message.
+
+Fri Nov 24 16:17:01 1995 Jeffrey A Law (law@cygnus.com)
+
+ * top.c (recurse_read_control_structure): Don't make cleanups
+ here. Callers handle that correctly.
+
+Tue Nov 21 15:16:34 1995 Fred Fish <fnf@rtl.cygnus.com>
+
+ * config/m68k/xm-hp300hpux.h: Define MMAP_BASE_ADDRESS and MMAP_INCREMENT.
+ Also force HAVE_MMAP to be defined since autoconf is currently broken
+ for detecting a working mmap under hpux.
+ * config/pa/xm-hppah.h (MMAP_BASE_ADDRESS): Tweak MMAP_BASE_ADDRESS
+ to a better value suggested by Jeffrey A Law (law@cygnus.com).
+
+Tue Nov 21 08:48:58 1995 Fred Fish <fnf@cygnus.com>
+
+ * config/pa/xm-hppah.h: Define MMAP_BASE_ADDRESS and MMAP_INCREMENT.
+ Also force HAVE_MMAP to be defined since autoconf is currently broken
+ for detecting a working mmap under hpux.
+ * objfiles.c (map_to_address): Have gdb print a warning when it
+ is compiled with HAVE_MMAP but without both MMAP_BASE_ADDRESS and
+ MMAP_INCREMENT defined (thus making it appear mmap doesn't work).
+
+Mon Nov 20 14:13:53 1995 Stu Grossman (grossman@cygnus.com)
+
+ * infrun.c (wait_for_inferior): Add support for dynamic function
+ trampolines. These are pieces of code between the caller and the
+ callee that figure out the address of the callee's code at run
+ time. Upon entry, we can't figure out the callee's address, so we
+ set a breakpoint within the trampoline where the address will be
+ known, and continue the target. Once we hit the breakpoint, we
+ break at the callee's address and proceed as usual.
+start-sanitize-gm
+ * config/tm-magic.h: Define DYNAMIC_TRAMPOLINE_NEXTPC. Turn off
+ IN_SOLIB_CALL_TRAMPOLINE and IN_SOLIB_RETURN_TRAMPOLINE.
+end-sanitize-gm
+
+Mon Nov 20 11:12:34 1995 Fred Fish <fnf@cygnus.com>
+
+ * objfiles.c (allocate_objfile): Change warning message about mapped
+ symbol tables so that it is obvious that they are not supported on
+ this particular machine rather than implying they are not supported
+ at all in this version of gdb.
+
+Sun Nov 19 05:20:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * irix5-nat.c, osfsolib.c (solib_address): Return the name of the
+ containing solib.
+ * stack.c (print_frame_info): Use minimal symbol only if
+ fi->pc is in a known section.
+
+Sat Nov 18 11:19:35 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
+
+ * solib.c (solib_address): Return the name of the containing solib.
+ * solib.h (PC_SOLIB): New macro; define using solib_address.
+ * stack.c (print_frame_info) [PC_SOLIB]: If no function name, try
+ PC_SOLIB on the PC value.
+
+Sat Nov 18 04:09:31 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * annotate.c (annotate_source, annotate_frame_begin): Issue
+ `0x' prefix for the pc value, to remain consistent with previous
+ GDB versions.
+
+ * blockframe.c (find_pc_partial_function), config/pa/tm-hppa.h:
+ Remove Sun shared library transfer hack and
+ INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK, it is obsoleted by the
+ mst_solib_trampoline minimal symbols.
+
+ * blockframe.c (inside_main_func): Check main_func_*pc against
+ INVALID_ENTRY_*PC, not zero.
+ * symfile.c (init_entry_point_info): Initialize ei.*pc with
+ INVALID_ENTRY_*PC.
+ * mipsread.c (mipscoff_symfile_read): If the entry_file bounds
+ are still unknown after processing the partial symbols, then try
+ to set them from the minimal symbols.
+
+ * infcmd.c (registers_info): Error out if selected_frame is NULL.
+ * stack.c (return_command): Select new current frame silently if
+ not interactive.
+
+ * mipsread.c (read_alphacoff_dynamic_symtab): Ignore additional
+ DT_MIPS_LOCAL_GOTNO and DT_MIPS_GOTSYM entries.
+
+ * irix5-nat.c (solib_create_inferior_hook): Call solib_add only
+ if auto_solib_add_at_startup is nonzero.
+ (_initialize_solib): Add "set auto-solib-add" command.
+ * osfsolib.c (solib_create_inferior_hook): Call solib_add only
+ if auto_solib_add_at_startup is nonzero.
+ (_initialize_solib): Add "set auto-solib-add" command.
+
+Wed Nov 15 17:12:04 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ * utils.c: Don't include sys/ioctl.h etc if MPW is host.
+
+Tue Nov 14 17:16:46 1995 Doug Evans <dje@canuck.cygnus.com>
+
+ * config/arm/tm-arm.h (ADDITIONAL_REGISTER_NAMES): Fix r5.
+ (FRAME_SAVED_PC): Minor clean up.
+
+Tue Nov 14 14:51:05 1995 Stu Grossman (grossman@cygnus.com)
+
+ * monitor.c (monitor_load_srec monitor_make_srec): Move all
+ S-record download code into srec.c.
+ * srec.c srec.h: New files. Contain S-record loading routines
+ formerly in monitor.c.
+ * serial.c serial.h: New routine just like fprintf, but uses
+ serial_t instead of FILE *.
+ * sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
+ Don't add four to saved pc (makes things match manual). Also, fix
+ bug where we didn't get pc from stack frame correctly.
+ * config/sh/tm-sh.h (SAVED_PC_AFTER_CALL): Don't add four to
+ saved pc. Real hardware does this for you.
+ * sh3-rom.c (sh3_load): New routine. Sets up for download then
+ calls generic S-record loader.
+ * config/h8300/h8300.mt, config/h8500/h8500.mt,
+ config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
+ Add srec.o to TDEPFILES.
+
+Tue Nov 14 15:57:36 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * ppcbug-rom.c: New file to support the Motorola PPCBUG monitor
+ for PowerPC's.
+
+ * config/powerpc/ppc{,le}-{eabi,sim}.mt (TDEPFILES): Include
+ ppcbug-rom.o, monitor.o, and srec.o
+
+ * config/i386/linux.mt (XDEPFILES): Include ser-tcp.o.
+
+Mon Nov 13 13:12:46 1995 Jeffrey A Law (law@cygnus.com)
+
+ * partial-stab.h: Remove GDB_TARGET_IS_HPPA kludge.
+
+Fri Nov 10 13:08:54 1995 Jeff Law (law@kahlua.cs.utah.edu)
+
+ * terminal.h (HAVE_SGTTY): Fix typo.
+
+Thu Nov 9 17:34:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in (gdb_target): Build in the simulator for all
+ PowerPC eabi targets, not just eabisim, providing
+ --enable-sim-powerpc is used, or the host compiler is GCC.
+
+Thu Nov 9 14:04:05 1995 Raymond Jou (rjou@mexican.cygnus.com)
+
+ * mpw-config.in: Add variable with names of SIOW libraries.
+ * mpw-make.sed: Add an action to build SIOWgdb.
+
+Wed Nov 8 19:25:22 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ * mpw-make.sed: Edit @ENABLE_CFLAGS@ out, mpw-configure can
+ add back in if necessary.
+
+Wed Nov 8 15:59:52 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
+
+ * config/mips/vr4300.mt: Added simulator to default VR4300 build.
+
+Tue Nov 7 16:02:25 1995 Stu Grossman (grossman@cygnus.com)
+
+ * remote-mips.c (mips_initialize): Fix brain damage found by
+ Jamie. Basically had case statement in the wrong place...
+ * (mips_load): Remove unnecessary `db tty0' command. It's all
+ handled by mips_initialize now.
+
+Tue Nov 7 12:59:14 1995 Raymond Jou <rjou@mexican.cygnus.com>
+
+ * mac-gdb.r: Added #ifdef Macgdb.
+
+Tue Nov 7 14:59:51 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
+
+ * remote-mips.c (mips_initialize): Updated to talk to VR4300 RISQ
+ monitor board.
+
+Mon Nov 6 11:44:11 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
+
+ * config/mips/{tm-vr4300.h tm-vr4300el.h} (TARGET_MONITOR_PROMPT):
+ Change into real strings.
+
+ * remote-sim.c (gdbsim_open): Moved sim_open() call to after
+ callback initialisation.
+
+Sun Nov 5 00:07:52 1995 Jason Molenda (crash@phydeaux.cygnus.com)
+
+ * configure.in (AC_CHECK_HEADERS): add stddef.h.
+
+Fri Nov 3 12:30:43 1995 Fred Fish <fnf@cygnus.com>
+
+ * Makefile.in (COMMON_OBS): Use corefile.o rather than core.o
+ * core.c: Rename to corefile.c.
+ * config/pyr/tm-pyr.h, umax-xdep.c, sun386-nat.c, pyr-xdep.c,
+ Makefile.in (SFILES), gould-xdep.c, coredep.c, armtdep.c,
+ arm-xdep.c, altos-xdep.c: Change core.c references to corefile.c.
+
+ From Graham Stoney <greyham@research.canon.oz.au>.
+ * Makefile.in (remote-array.o): Add rule to build.
+ (ALLDEPFILES): Add remote-array.c
+ * remote-array.c (baud_rate): Remove unnecessary declaration.
+ (baudrate): Remove.
+ (array_files_info): Print global baud_rate not baudrate.
+
+Sat Nov 4 10:21:58 1995 Stu Grossman (grossman@cygnus.com)
+
+ * Makefile.in (INTERNAL_CFLAGS): Add ENABLE_CFLAGS.
+ * fork-child.c (fork_inferior): Add call to
+ TARGET_CREATE_INFERIOR_HOOK to allow target specific code to get
+ control just before the new process executes it's first instruction.
+ * remote-mips.c (mips_initialize): Cleanup a bit. Don't try to
+ receive a packet at first. This speeds up initialization a lot.
+ Use TARGET_MONITOR_PROMPT instead of "<IDT>".
+ (common_breakpoint): Use rresponse instead of rerrflg to inspect
+ error code.
+ * symfile.c (syms_from_objfile reread_symbols): Call
+ TARGET_SYMFILE_POSTREAD to allow target specific code to get
+ control after reading new symbols.
+ * target.h: New macros TARGET_SYMFILE_POSTREAD, and
+ TARGET_CREATE_INFERIOR_HOOK. See above for descriptions.
+ * config/mips/{irix5.mh nm-irix5.h}: Delete nm-irix5.h. Make
+ NAT_FILE point directly at ../nm-sysv4.h.
+ * config/mips/{mipsm3.mh nm-m3.h}: Delete nm-m3.h. Make
+ NAT_FILE point directly at ../nm-m3.h.
+ * config/mips/{mipsv4.mh nm-sysv4.h}: Delete nm-sysv4.h. Make
+ NAT_FILE point directly at ../nm-sysv4.h.
+ * config/mips/nm-mips.h: Improve comment at top of file.
+ * config/mips/tm-mips.h (TARGET_MONITOR_PROMPT): Change
+ definition into a proper string.
+start-sanitize-gm
+ * configure configure.in: Add support for --enable-gm.
+ (mips*-*-magic*): Change target from magic to idt.
+ * eval.c expprint.c expression.h parse.c remote-mips.c utils.c:
+ Change GENERAL_MAGIC_HACKS to GENERAL_MAGIC.
+ * magic.c magic.h: Update files from GM.
+ * config/mips/magic.mt: Delete. No longer necessary now that we
+ use --enable mechanism.
+ * config/mips/tm-idt.h: Add GM stuff needed for remote GM box.
+ * config/mips/tm-irix5.h: Add GM stuff needed for native Irix box.
+ * config/mips/tm-magic.h: Move up to config/tm-magic.h. Move all
+ platform specific stuff into tm-irix.h and tm-idt.h. Add defs for
+ TARGET_SYMFILE_POSTREAD and TARGET_CREATE_INFERIOR_HOOK.
+end-sanitize-gm
+
+Wed Nov 1 20:18:08 1995 Fred Fish <fnf@cygnus.com>
+
+ * config/i386/tm-i386.h: New file containing generic i*86 target
+ definitions.
+ (TARGET_BYTE_ORDER): Moved here from tm-i386v.h.
+ (IEEE_FLOAT): Moved here from tm-i386v.h.
+ (START_INFERIOR_TRAPS_EXPECTED): Define default as 2.
+ (FUNCTION_START_OFFSET): Moved here from tm-i386v.h.
+ (SKIP_PROLOGUE): Moved here from tm-i386v.h.
+ (SAVED_PC_AFTER_CALL): Moved here from tm-i386v.h.
+ (INNER_THAN): Moved here from tm-i386v.h.
+ (BREAKPOINT): Moved here from tm-i386v.h.
+ (DECR_PC_AFTER_BREAK): Moved here from tm-i386v.h.
+ (ABOUT_TO_RETURN): Moved here from tm-i386v.h.
+ (REGISTER_SIZE): Moved here from tm-i386v.h.
+ (NUM_REGS): Moved here from tm-i386v.h.
+ (REGISTER_NAMES): Moved here from tm-i386v.h.
+ (EXTRACT_STRUCT_VALUE_ADDRESS): Moved here from tm-i386v.h.
+ (FP_REGNUM): Moved here from tm-i386v.h.
+ (SP_REGNUM): Moved here from tm-i386v.h.
+ (PC_REGNUM): Moved here from tm-i386v.h.
+ (PS_REGNUM): Moved here from tm-i386v.h.
+ (FP0_REGNUM): Moved here from tm-i386aix.h.
+ (FPC_REGNUM): Moved here from tm-sun386.h.
+ (REGISTER_BYTES): Moved here from tm-i386aix.h.
+ (REGISTER_BYTE): Moved here from tm-i386aix.h.
+ (REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
+ (MAX_REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
+ (REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
+ (MAX_REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
+ (EXTRACT_RETURN_VALUE): Moved here from tm-i386aix.h.
+ (STORE_RETURN_VALUE): Moved here from tm-i386aix.h.
+ (REGISTER_VIRTUAL_TYPE): Moved here from tm-i386v.h.
+ (STORE_STRUCT_RETURN): Moved here from tm-i386v.h.
+ (FRAME_CHAIN): Moved here from tm-i386v4.h.
+ (FRAMELESS_FUNCTION_INVOCATION): Moved here from tm-i386v4.h.
+ (FRAME_SAVED_PC): Moved here from tm-i386os9k.h
+ (FRAME_ARGS_ADDRESS): Moved here from tm-i386v.h.
+ (FRAME_LOCALS_ADDRESS): Moved here from tm-i386v.h.
+ (FRAME_NUM_ARGS): Moved here from tm-i386sun.h.
+ (FRAME_ARGS_SKIP): Moved here from tm-i386v.h.
+ (FRAME_FIND_SAVED_REGS): Moved here from tm-i386v.h.
+ (PUSH_DUMMY_FRAME): Moved here from tm-i386v.h.
+ (POP_FRAME): Moved here from tm-i386v.h.
+ (CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET,
+ CALL_DUMMY_BREAKPOINT_OFFSET, FIX_CALL_DUMMY): Moved here from
+ tm-i386v.h
+ (print_387_control_word, print_387_status_word): Declare prototypes.
+ (struct frame_info, struct frame_saved_regs): Forward decls for
+ prototypes.
+ (SP_ARG0): Moved here from tm-i386v.h.
+
+ * config/i386/tm-i386v.h:
+ (i386/tm-i386.h): Include.
+ (TARGET_BYTE_ORDER): Remove.
+ (IEEE_FLOAT): Remove.
+ (START_INFERIOR_TRAPS_EXPECTED): Undef before redefine to 4.
+ (FUNCTION_START_OFFSET): Remove.
+ (SKIP_PROLOGUE): Remove.
+ (i386_skip_prologue): Remove prototype.
+ (SAVED_PC_AFTER_CALL): Remove.
+ (INNER_THAN): Remove.
+ (BREAKPOINT): Remove.
+ (DECR_PC_AFTER_BREAK): Remove.
+ (ABOUT_TO_RETURN): Remove.
+ (REGISTER_SIZE): Remove.
+ (NUM_REGS): Undef before redefine to 16 (no FP support).
+ (REGISTER_NAMES): Undef before redefine.
+ (FP_REGNUM, SP_REGNUM, PC_REGNUM, PS_REGNUM): Remove.
+ (REGISTER_BYTES): Undef before redefine.
+ (REGISTER_BYTE): Undef before redefine.
+ (REGISTER_RAW_SIZE): Undef before redefine.
+ (REGISTER_VIRTUAL_SIZE): Undef before redefine.
+ (MAX_REGISTER_RAW_SIZE): Undef before redefine.
+ (MAX_REGISTER_VIRTUAL_SIZE): Undef before redefine.
+ (REGISTER_VIRTUAL_TYPE): Undef before redefine.
+ (STORE_STRUCT_RETURN): Undef before redefine.
+ (EXTRACT_RETURN_VALUE): Undef before redefine.
+ (STORE_RETURN_VALUE): Undef before redefine.
+ (EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
+ (FRAME_CHAIN): Undef before redefine.
+ (FRAMELESS_FUNCTION_INVOCATION): Undef before redefine.
+ (FRAME_SAVED_PC): Undef before redefine.
+ (FRAME_ARGS_ADDRESS): Remove.
+ (FRAME_LOCALS_ADDRESS): Remove.
+ (FRAME_NUM_ARGS): Undef before redefine.
+ (FRAME_ARGS_SKIP): Remove.
+ (FRAME_FIND_SAVED_REGS): Remove.
+ (PUSH_DUMMY_FRAME): Remove.
+ (POP_FRAME): Remove.
+ (CALL_DUMMY): Remove.
+ (CALL_DUMMY_LENGTH): Remove.
+ (CALL_DUMMY_START_OFFSET): Remove.
+ (CALL_DUMMY_BREAKPOINT_OFFSET): Remove
+ (FIX_CALL_DUMMY): Remove.
+ (print_387_control_word): Remove.
+ (print_387_status_word): Remove.
+ (SP_ARG0): Remove.
+
+ * config/i386/tm-symmetry.h:
+ (TM_SYMMETRY_H): Enclose file in test for define & define if needed.
+ (START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
+ tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
+ (DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
+ or tm-i386v.h, #undef, and #define to 0.
+ (MAX_REGISTER_RAW_SIZE): Remove.
+ (FRAME_CHAIN): Remove.
+ (FRAMELESS_FUNCTION_INVOCATION): Remove.
+ (FRAME_SAVED_PC): Remove.
+ (print_387_control_word, print_387_status_word): Remove prototypes.
+
+ * config/i386/tm-ptx.h:
+ (TM_PTX_H): Enclose file in test for define & define if needed.
+ (START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
+ tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
+ (DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
+ or tm-i386v.h, #undef, and #define to 0.
+ (SDB_REG_TO_REGNUM): Remove obsolete commented out define.
+ (print_387_control_word, print_387_status_word): Remove prototypes.
+
+ * config/i386/tm-linux.h:
+ (TM_LINUX_H): Enclose file in test for define & define if needed.
+ (i386/tm-i386.h): Include instead of tm-i386v.h.
+ (START_INFERIOR_TRAPS_EXPECTED): Remove.
+
+ * config/i386/tm-i386v4.h:
+ (TM_I386V4_H): Enclose file in test for define & define if needed.
+ (i386/tm-i386.h): Include instead of tm-i386v.h.
+ (START_INFERIOR_TRAPS_EXPECTED): Remove.
+ (FRAME_CHAIN): Moved to tm-i386.h.
+ (FRAMELESS_FUNCTION_INVOCATION): Moved to tm-i386.h.
+ (FRAME_SAVED_PC): Remove.
+ (sigtramp_saved_pc): Define as i386v4_sigtramp_saved_pc.
+ (FRAME_NUM_ARGS): Remove.
+
+ * config/i386/tm-i386os9k.h:
+ (TM_I386OS9K_H): Enclose file in test for define & define if needed.
+ (i386/tm-i386.h): Include instead of tm-i386v.h.
+ (START_INFERIOR_TRAPS_EXPECTED): Remove.
+ (NUM_REGS): Undefine before redefining.
+ (FRAME_CHAIN): Remove.
+ (FRAMELESS_FUNCTION_INVOCATION): Remove.
+ (FRAME_SAVED_PC): Move to tm-i386.h.
+
+ * config/i386/tm-i386nw.h:
+ (TM_I386NW_H): Enclose file in test for define & define if needed.
+ (i386/tm-i386.h): Include instead of tm-i386v.h.
+ (START_INFERIOR_TRAPS_EXPECTED): Remove.
+
+ * config/i386/tm-i386bsd.h:
+ (TM_I386BSD_H): Enclose file in test for define & define if needed.
+ (i386/tm-i386.h): Include instead of tm-i386v.h.
+ (START_INFERIOR_TRAPS_EXPECTED): Remove.
+ (FRAMELESS_FUNCTION_INVOCATION): Remove.
+ (FRAME_SAVED_PC): Remove.
+
+ * config/i386/tm-i386aix.h:
+ (i386/tm-i386.h): Include instead of tm-i386v.h.
+ (START_INFERIOR_TRAPS_EXPECTED): Remove.
+ (FP_REGNUM): Remove.
+ (SP_REGNUM): Remove.
+ (PC_REGNUM): Remove.
+ (PS_REGNUM): Remove.
+ (FP0_REGNUM): Moved to tm-i386.h.
+ (NUM_REGS): Remove.
+ (REGISTER_NAMES): Remove.
+ (REGISTER_BYTES): Moved to tm-i386.h.
+ (REGISTER_BYTE): Moved to tm-i386.h.
+ (REGISTER_RAW_SIZE): Moved to tm-i386.h.
+ (MAX_REGISTER_RAW_SIZE): Moved to tm-i386.h.
+ (REGISTER_VIRTUAL_SIZE): Moved to tm-i386.h.
+ (REGISTER_VIRTUAL_TYPE): Removed.
+ (EXTRACT_RETURN_VALUE): Moved to tm-i386.h.
+ (STORE_RETURN_VALUE): Moved to tm-i386.h.
+
+ * config/i386/tm-sun386.h:
+ (TM_SUN386_H): Enclose file in test for define & define if needed.
+ (i386/tm-i386.h): Include.
+ (TARGET_BYTE_ORDER): Remove.
+ (FUNCTION_START_OFFSET): Remove.
+ (SKIP_PROLOGUE): Remove.
+ (SAVED_PC_AFTER_CALL): Remove.
+ (INNER_THAN): Remove.
+ (BREAKPOINT): Remove.
+ (DECR_PC_AFTER_BREAK): Remove.
+ (ABOUT_TO_RETURN): Remove.
+ (REGISTER_SIZE): Remove.
+ (NUM_REGS): Undefine before defining.
+ (REGISTER_NAMES): Undefine before redefining.
+ (REGISTER_BYTES): Undefine before redefining.
+ (REGISTER_BYTE): Undefine before defining.
+ (FP_REGNUM): Undefine before defining.
+ (PC_REGNUM): Undefine before defining.
+ (FPC_REGNUM): Undefine before defining.
+ (REGISTER_RAW_SIZE): Undefine before defining.
+ (FRAME_CHAIN): Undefine before defining.
+ (FRAMELESS_FUNCTION_INVOCATION): Undefine before defining.
+ (FRAME_SAVED_PC): Undefine before defining.
+ (FRAME_NUM_ARGS): Moved to tm-i386.h.
+ (MAX_REGISTER_RAW_SIZE): Remove.
+ (MAX_REGISTER_VIRTUAL_SIZE): Remove.
+ (STORE_STRUCT_RETURN): Remove.
+ (EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
+ (FRAME_ARGS_ADDRESS): Remove.
+ (FRAME_LOCALS_ADDRESS): Remove.
+ (FRAME_NUM_ARGS): Undefine before defining.
+ (FRAME_ARGS_SKIP): Remove.
+ (FRAME_FIND_SAVED_REGS): Remove.
+ (PUSH_DUMMY_FRAME): Remove.
+ (POP_FRAME): Remove.
+ (CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET): Remove.
+ (struct frame_info, struct frame_saved_regs): Remove forward decls
+ for prototypes.
+
+ * config/i386/tm-i386lynx.h (i386/tm-i386.h): Include instead of
+ tm-i386v.h.
+ * config/i386/tm-i386m3.h (i386/tm-i386.h): Include instead of
+ tm-i386v.h.
+
+ * i386-tdep.c (i386_extract_return_value): Make function visible
+ for all i386 targets, but only assume floating point values returned
+ in floating point registers for I386_AIX_TARGET.
+
+ * i386v-nat.c (i386_register_u_addr): Enable code to locate
+ floating point regs in user struct.
+
+Wed Nov 1 15:32:57 1995 Fred Fish <fnf@cygnus.com>
+
+ * breakpoint.c (breakpoint_re_set): Fix typo in comment.
+ * symtab.c (in_prologue): Document func_start and when it is zero
+ don't call SKIP_PROLOGUE (which typically leads unconditionally to
+ an error when we try to access a prologue at address 0).
+
+Tue Oct 31 13:01:15 1995 Fred Fish <fnf@cygnus.com>
+
+ * elfread.c: Include elf-bfd.h rather than libelf.h.
+
Tue Oct 31 10:42:42 1995 steve chamberlain <sac@slash.cygnus.com>
* win32-nat.c (xlate_exception): Treat a stack overflow like a SEGV.
projects / deliverable / binutils-gdb.git / blobdiff