+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-value.c (valpy_dereference, valpy_referenced_value)
+ (valpy_reference_value, valpy_const_value, valpy_get_address)
+ (valpy_get_dynamic_type, valpy_lazy_string, valpy_do_cast)
+ (valpy_getitem, valpy_call, valpy_binop_throw, valpy_negative)
+ (valpy_absolute, valpy_richcompare_throw): Use scoped_value_mark.
+ * dwarf2loc.c (dwarf2_loc_desc_get_symbol_read_needs): Use
+ scoped_value_mark.
+ * dwarf2-frame.c (execute_stack_op): Use scoped_value_mark.
+ * value.h (scoped_value_mark): New class.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * dwarf2read.c (dwarf2_build_psymtabs): Use psymtab_discarder.
+ * psympriv.h (make_cleanup_discard_psymtabs): Don't declare.
+ * psymtab.c (discard_psymtabs_upto): Remove.
+ (make_cleanup_discard_psymtabs): Remove.
+ (struct psymtab_state): Remove.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * record-full.c (record_full_save_cleanups): Remove.
+ (record_full_save): Use gdb::unlinker.
+ * gcore.c (do_bfd_delete_cleanup): Remove.
+ (gcore_command): Use gdb::unlinker, unique_xmalloc_ptr. Remove
+ cleanups.
+ * dwarf2read.c (unlink_if_set): Remove.
+ (write_psymtabs_to_index): Use gdb::unlinker.
+ * common/gdb_unlinker.h: New file.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * windows-tdep.c (windows_xfer_shared_library): Update.
+ * windows-nat.c (windows_make_so): Update.
+ * utils.h (make_cleanup_bfd_unref): Remove.
+ * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
+ * symfile.h (symfile_bfd_open)
+ (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
+ * symfile.c (read_symbols, symbol_file_add)
+ (separate_debug_file_exists): Update.
+ (symfile_bfd_open): Return gdb_bfd_ref_ptr.
+ (generic_load, reread_symbols): Update.
+ * symfile-mem.c (symbol_file_add_from_memory): Update.
+ * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
+ (spu_symbol_file_add_from_memory): Update.
+ * solist.h (struct target_so_ops) <bfd_open>: Return
+ gdb_bfd_ref_ptr.
+ (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
+ * solib.c (solib_bfd_fopen, solib_bfd_open): Return
+ gdb_bfd_ref_ptr.
+ (solib_map_sections, reload_shared_libraries_1): Update.
+ * solib-svr4.c (enable_break): Update.
+ * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
+ * solib-frv.c (enable_break2): Update.
+ * solib-dsbt.c (enable_break): Update.
+ * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
+ gdb_bfd_ref_ptr.
+ (darwin_solib_get_all_image_info_addr_at_init): Update.
+ (darwin_bfd_open): Return gdb_bfd_ref_ptr.
+ * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
+ * record-full.c (record_full_save): Update.
+ * python/py-objfile.c (objfpy_add_separate_debug_file): Update.
+ * procfs.c (insert_dbx_link_bpt_in_file): Update.
+ * minidebug.c (find_separate_debug_file_in_section): Return
+ gdb_bfd_ref_ptr.
+ * machoread.c (macho_add_oso_symfile): Change abfd to
+ gdb_bfd_ref_ptr.
+ (macho_symfile_read_all_oso): Update.
+ (macho_check_dsym): Return gdb_bfd_ref_ptr.
+ (macho_symfile_read): Update.
+ * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
+ (jit_bfd_try_read_symtab): Update.
+ * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
+ (gdb_bfd_openw, gdb_bfd_openr_iovec)
+ (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
+ gdb_bfd_ref_ptr.
+ (gdb_bfd_ref_policy): New struct.
+ (gdb_bfd_ref_ptr): New typedef.
+ * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
+ (gdb_bfd_openw, gdb_bfd_openr_iovec)
+ (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
+ gdb_bfd_ref_ptr.
+ * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
+ * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
+ (gcore_command): Update.
+ * exec.c (exec_file_attach): Update.
+ * elfread.c (elf_symfile_read): Update.
+ * dwarf2read.c (dwarf2_get_dwz_file): Update.
+ (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
+ (open_and_init_dwo_file): Update.
+ (open_dwp_file): Return gdb_bfd_ref_ptr.
+ (open_and_init_dwp_file): Update.
+ * corelow.c (core_open): Update.
+ * compile/compile-object-load.c (compile_object_load): Update.
+ * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
+ * coffread.c (coff_symfile_read): Update.
+ * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
+ gdb_bfd_ref_ptr. Rename.
+ (dump_bfd_file, restore_command): Update.
+ * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
+ * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
+ (find_separate_debug_file_by_buildid): Update.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * common/gdb_ref_ptr.h: New file.
+ * python/py-ref.h (struct gdbpy_ref_policy): New.
+ (gdbpy_ref): Now a typedef.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * utils.h (make_cleanup_htab_delete): Don't declare.
+ * utils.c (do_htab_delete_cleanup, make_cleanup_htab_delete):
+ Remove.
+ * linespec.c (decode_compound_collector): Add constructor,
+ destructor.
+ (lookup_prefix_sym): Remove cleanup.
+ (symtab_collector): Add constructor, destructor.
+ (collect_symtabs_from_filename): Remove cleanup.
+ * disasm.c (do_mixed_source_and_assembly): Use htab_up.
+ * compile/compile-c-symbols.c (generate_c_for_variable_locations):
+ Use htab_up.
+ * gnu-v3-abi.c (gnuv3_print_vtable): Use htab_up.
+ * dwarf2read.c (dw2_expand_symtabs_matching)
+ (dw2_map_symbol_filenames, dwarf_decode_macros)
+ (write_psymtabs_to_index): Use htab_up.
+ * dwarf2loc.c (func_verify_no_selftailcall)
+ (call_site_find_chain_1, func_verify_no_selftailcall)
+ (chain_candidate, call_site_find_chain_1): Use std::unordered_set,
+ std::vector, gdb::unique_xmalloc_ptr.
+ (call_sitep): Remove typedef.
+ (dwarf2_locexpr_baton_eval): Remove unused variable.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/python-internal.h (make_cleanup_py_decref)
+ (make_cleanup_py_xdecref): Don't declare.
+ * python/py-utils.c (py_decref, make_cleanup_py_decref)
+ (py_xdecref, make_cleanup_py_xdecref): Remove.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-framefilter.c (py_mi_print_variables): Use gdbpy_ref.
+ (py_print_locals, enumerate_locals, py_print_args): Use gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-framefilter.c (enumerate_args): Use gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-utils.c (unicode_to_encoded_string)
+ (python_string_to_target_string)
+ (python_string_to_target_python_string)
+ (python_string_to_host_string, gdbpy_obj_to_string)
+ (get_addr_from_python): Use gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-unwind.c (pyuw_object_attribute_to_pointer): Use
+ gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/python.c (eval_python_command, gdbpy_decode_line)
+ (gdbpy_run_events, gdbpy_start_type_printers)
+ (gdbpy_apply_type_printers): Use gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-param.c (get_doc_string, compute_enum_values): Use
+ gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-inferior.c (find_thread_object, build_inferior_list):
+ Use gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-framefilter.c (py_print_frame): Use gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-finishbreakpoint.c (bpfinishpy_out_of_scope): Use
+ gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-cmd.c (cmdpy_completer_helper): Use gdbpy_ref. Remove
+ extra incref.
+ (cmdpy_completer_handle_brkchars, cmdpy_completer, cmdpy_init):
+ Use gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Use
+ gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-arch.c (archpy_disassemble): Use gdbpy_ref. Don't
+ decref results of PyArg_ParseTupleAndKeywords.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/python.c (python_run_simple_file): Use
+ unique_xmalloc_ptr, gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-prettyprint.c (print_stack_unless_memory_error)
+ (print_string_repr, print_children): Use gdbpy_ref.
+ (dummy_python_frame): New class.
+ (dummy_python_frame::dummy_python_frame): Rename from
+ push_dummy_python_frame.
+ (py_restore_tstate): Remove.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-framefilter.c (py_print_frame): Use gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/python.c (ensure_python_env, restore_python_env):
+ Remove.
+ * python/python-internal.h (ensure_python_env): Don't declare.
+ * varobj.h (varobj_ensure_python_env): Don't declare.
+ * varobj.c (varobj_ensure_python_env): Remove.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * varobj.c (varobj_value_get_print_value): Use
+ gdbpy_enter_varobj.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-prettyprint.c (print_string_repr, print_children):
+ Update.
+ * python/py-lazy-string.c (gdbpy_extract_lazy_string): Change type
+ of "encoding".
+ * varobj.c (varobj_value_get_print_value): Update.
+ * python/python-internal.h (gdbpy_extract_lazy_string): Update.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * varobj.c (varobj_get_display_hint)
+ (dynamic_varobj_has_child_method, install_new_value_visualizer)
+ (varobj_set_visualizer, free_variable): Use
+ gdbpy_enter_varobj.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/python.c (python_command): Use gdbpy_enter, gdbpy_ref.
+ (do_finish_initialization): New function. Use gdbpy_ref.
+ (gdbpy_finish_initialization): Use gdbpy_enter. Call
+ do_finish_initialization.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-param.c (get_set_value, get_show_value): Use
+ gdbpy_enter, gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-function.c (fnpy_call): Use gdbpy_enter, gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-cmd.c (cmdpy_function): Use gdbpy_enter, gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-varobj.c (py_varobj_iter_dtor, py_varobj_iter_next):
+ Use gdbpy_enter_varobj.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * varobj.c (gdbpy_enter_varobj): New constructor.
+ * python/python-internal.h (gdbpy_enter_varobj): New class.
+ * python/py-varobj.c (py_varobj_get_iterator): Use
+ gdbpy_enter_varobj.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-xmethods.c (gdbpy_get_xmethod_result_type): Use
+ gdbpy_enter, gdbpy_ref, unique_xmalloc_ptr.
+ (gdbpy_invoke_xmethod): Use gdbpy_ref, gdbpy_enter.
+ (gdbpy_get_xmethod_arg_types): Use gdbpy_ref,
+ unique_xmalloc_ptr.
+ (gdbpy_get_xmethod_arg_types): Use gdbpy_ref, gdbpy_enter.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-xmethods.c (invoke_match_method): Use
+ gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): use
+ gdbpy_enter, gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/python.c (python_interactive_command): Use gdbpy_enter.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/python.c (gdbpy_before_prompt_hook): Use gdbpy_enter,
+ gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-prettyprint.c (gdbpy_apply_val_pretty_printer): Use
+ gdbpy_enter, gdbpy_ref, unique_xmalloc_ptr.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * utils.h (htab_deleter): New struct.
+ (htab_up): New typedef.
+ * python/py-framefilter.c (gdbpy_apply_frame_filter): Use
+ gdbpy_enter, gdbpy_ref, htab_up.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-unwind.c (pending_frame_invalidate): Remove.
+ (pyuw_sniffer): Use gdbpy_enter and gdbpy_ref.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-xmethods.c (gdbpy_free_xmethod_worker_data)
+ (gdbpy_clone_xmethod_worker_data): Use gdbpy_enter.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-type.c (save_objfile_types): Use gdbpy_enter.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/python.c (gdbpy_eval_from_control_command)
+ (gdbpy_source_script, gdbpy_run_events)
+ (gdbpy_source_objfile_script, gdbpy_execute_objfile_script)
+ (gdbpy_free_type_printers, gdbpy_finish_initialization): Use
+ gdbpy_enter.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-progspace.c (py_free_pspace): Use gdbpy_enter.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-objfile.c (py_free_objfile): Use gdbpy_enter.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-inferior.c (python_on_normal_stop, python_on_resume)
+ (python_on_inferior_call_pre, python_on_inferior_call_post)
+ (python_on_memory_change, python_on_register_change)
+ (python_inferior_exit, python_new_objfile, add_thread_object)
+ (delete_thread_object, py_free_inferior): Use gdbpy_enter.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-finishbreakpoint.c (bpfinishpy_handle_stop)
+ (bpfinishpy_handle_exit): Use gdbpy_enter.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-cmd.c (cmdpy_destroyer)
+ (cmdpy_completer_handle_brkchars, cmdpy_completer): Use
+ gdbpy_enter.
+
+2017-01-10 Tom Tromey <tom@tromey.com>
+
+ * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Use
+ gdbpy_enter.
+ (gdbpy_breakpoint_has_cond): Likewise.
+
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_enter): New constructor.
projects / deliverable / binutils-gdb.git / blobdiff