+Mon May 22 15:38:25 1995 Stu Grossman (grossman@cygnus.com)
+
+ * remote-nindy.c: Install Kung patch for PR 6820. I have no idea
+ what this does...
+
+ * breakpoint.c: Move defaults of watchpoint related macros into
+ target.h.
+ * target.h: Macros from breakpoint.c. Conditionalize based on
+ TARGET_HAS_HARDWARE_WATCHPOINTS.
+ * i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS
+ instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
+ code.
+ * config/i386/nm-linux.h, config/mips/nm-irix4.h,
+ config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define
+ TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
+
+Mon May 22 06:47:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * breakpoint.c, target.h: Move defaults of watchpoint related
+ macros back to breakpoint.c. Required to get GDB compiling
+ on Solaris again.
+
+Fri May 19 14:49:37 1995 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * defs.h (ATTR_FORMAT): New macro, expands to gcc's format
+ attribute when compiled by gcc.
+ * defs.h, language.h, monitor.h: Changed many function
+ declarations to use ATTR_FORMAT.
+
+ * breakpoint.c (delete_command); source.c (directory_command);
+ top.c (define_command): Changed call to query() that had too
+ many arguments.
+ * printcmd.c (address_info): Changed call to printf_filtered()
+ that had too many arguments.
+
+Fri May 19 09:52:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * infrun.c (wait_for_inferior): Move assignments to stop_signal
+ and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they
+ were--after the switch statement on w.kind. You can't read the
+ registers of an inferior which has exited. Use a goto in the
+ STOPPED_BY_WATCHPOINT code.
+ * infrun.c (wait_for_inferior): Reinstate
+ HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code.
+
+Fri May 19 06:15:40 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
+
+ * utils.c, complaints.c, language.c, monitor.c, remote-array.c,
+ remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of
+ stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it
+ must match the definition of PARAMS.
+start-sanitize-gdbtk
+ * gdbtk.c: Likewise.
+end-sanitize-gdbtk
+
+Thu May 18 15:58:46 1995 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered,
+ printf_filtered, printf_unfiltered, printfi_filtered, query, warning,
+ error, fatal, fatal_dump_core): Use stdarg.h macros when compiling
+ with an ANSI compiler.
+ * complaints.c (complain): Likewise.
+ * language.c (type_error, range_error): Likewise.
+ * monitor.c (monitor_printf, monitor_printf_noecho): Likewise.
+ * remote-array.c (printf_monitor, debuglogs): Likewise.
+ * remote-mips.c (mips_error): Likewise.
+ * remote-os9k.c (printf_monitor): Likewise.
+ * remote-st.c (printf_stdebug): Likewise.
+start-sanitize-gdbtk
+ * gdbtk.c (gdbtk_query): Likewise.
+end-sanitize-gdbtk
+
+ * defs.h, complaints.h, language.h, monitor.h: Add prototypes to
+ match above changes.
+
+ * printcmd.c: Remove uneeded #include <varargs.h>.
+ * remote-e7000.c: Likewise.
+
+ * f-typeprint.c (f_type_print_base): Fix typo found by above
+ changes.
+
+Wed May 17 11:21:32 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
+
+ * Makefile.in (xcoffread.o): Depend on partial-stab.h.
+
+ * xcoffsolib.c (sharedlibrary_command): New command.
+ * xcoffsolib.c (solib_info): Call xcoff_relocate_symtab.
+ * xcoffsolib.c: Miscellaneous cleanups.
+
+ * partial-stab.h: Ignore symbol descriptor '-' (for local
+ variables with negative type numbers) without complaint.
+
+ * rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own
+ local emulation thereof. Remove unused variable ostart.
+
+Wed May 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * Makefile.in (config.status): changed target so that
+ config.status --recheck is executed if configure script changes.
+
+ * monitor.c (monitor_printf): Changed format specification in
+ error message to work with pre-ansi compilers.
+ (monitor_load_srec): reduced length of s-records from 128 to 32
+ bytes so download is more reliable with the rom68k monitor.
+
+ * rom68k-rom.c: Added trailing space to prompt string.
+
+ * config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
+ * config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
+ Removed.
+ * defs.h, config/{xm-lynx.h, xm-nbsd.h},
+ config/i386/{xm-i386bsd.h, xm-linux.h},
+ config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
+ config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
+ (PSIGNAL_IN_SIGNAL_H): Removed.
+
+Tue May 16 13:16:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * Makefile.in (Makefile): Added config.status to dependency list.
+
+ * configure.in: Added INIT-CMDS argument to AC_OUTPUT which sets
+ gdb_host_cpu, gdb_target_cpu and nativefile.
+ * configure: regenerated.
+
+Mon May 15 23:50:51 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * mdebugread.c (parse_symbol): Do not relocate stBlock/scText
+ symbols, their value is the displacement from the procedure address.
+ * top.c (init_main): Add missing newlines to help strings for
+ `if' and `while' commands, fix help string for `show commands'.
+
+Mon May 15 18:37:56 1995 Stu Grossman (grossman@cygnus.com)
+
+ * breakpoint.c: Move defaults of watchpoint related macros into
+ target.h. Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of
+ constants.
+ * infrun.c (wait_for_inferior): Enhance comment near
+ STOPPED_BY_WATCHPOINT.
+ * target.h: Macros from breakpoint.c.
+
+Mon May 15 17:11:38 1995 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * config/i386/{i386sol2.mh, i386v4.mh, ncr3000.mh},
+ config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
+ mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
+ out by autoconf.
+ * config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
+
+ * Makefile.in, configure.in: Converted to use autoconf
+ * aclocal.m4: New file, local autoconf macro definitions.
+ * configure: New file, generated with autoconf 2.3.
+
+Mon May 15 14:46:41 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ * remote.c (remote_kill): Add prototype.
+ * cpu32bug-rom.c (cpu32bug_open): Properly define as static.
+ * config/h8300/h8300hms.mt (TDEPFILES): Add monitor.o.
+
+Mon May 15 12:12:34 1995 Stu Grossman (grossman@cygnus.com)
+
+ * sparclite/salib.c (win_ovf win_unf): Make window size constant
+ into a variable (__WINSIZE) so that it can be controlled via the
+ .h file.
+ * sparclite/sparclite.h: Add SL933 #ifdef to set __WINSIZE to 6
+ for the 933 board.
+
+ * infrun.c: Add #ifdef HP_OS_BUG to all references to
+ trap_expected_after_continue.
+ * (wait_for_inferior): Fix for remote watchpoints. Don't try to
+ insert breakpoints while target is running (this only works on
+ *some* native targets). This may also speed up native watchpoints
+ considerably.
+
+Sat May 13 13:55:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
+ mdebugread.c (struct symloc), hpread.c (struct symloc),
+ xcoffread.c (struct symloc): Fix inaccurate comment introduced
+ 20 Apr 1995.
+
+Sat May 13 13:34:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
+
+ * rs6000-tdep.c (find_toc_address): Revise comment.
+ * symfile.c, symfile.h (init_psymbol_list): New function;
+ consolidate duplicated copies from os9kread.c, dbxread.c
+ and dwarfread.c.
+ * defs.h: Declare info_verbose.
+ * xcoffread.c: Extensive changes to support psymtabs.
+
+Fri May 12 13:48:41 1995 Stu Grossman (grossman@andros.cygnus.com)
+
+ * cpu32bug-rom.c remote-est.c rom68k-rom.c: Update line_term element.
+
+Fri May 12 06:39:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * partial-stab.h: Expand comments.
+
+Thu May 11 19:01:37 1995 Jeff Law (law@snake.cs.utah.edu)
+
+ * Support debugging using native MACH primitives on hppa*-*-osf*.
+ * configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore.
+ * config/pa/hppaosf.mh: New file.
+ * config/pa/nm-hppao.h: Likewise.
+ * hppam3-nat.c: Likewise.
+ * config/pa/tm-hppao.h (PSW_SS): Define for single-stepping.
+ (MACHINE_CPROC_*_OFFSET): Define.
+ (TRACE_*): Define.
+ (START_INFERIOR_TRAPS_EXPECTED): Delete definition.
+
+Wed May 10 18:59:26 1995 Stu Grossman (grossman@andros.cygnus.com)
+
+ * hppa-tdep.c (read_unwind_info): Cosmetic cleanup.
+ * (unwind_command): Clean it up and make it print things out
+ nicer.
+ * monitor.c: Add ^C handling capability (mostly ripped off from
+ remote.c).
+ * (monitor_printf): Make it check the command echo.
+ * (monitor_printf_noecho): Similar to above, but doesn't check
+ for echo.
+ * (monitor_stop): No longer waits for prompt. That is the job of
+ the caller. This makes things work much better for monitor_wait,
+ which waits for the prompt itself.
+ * (monitor_open): Deal with new monitor_stop semantics. Also,
+ flush input after sending init strings to get rid of junk that may
+ be output. Also, don't always send \r to remote. Use
+ monitor_ops->line_term cuz proper character isn't always \r.
+ * (monitor_fetch_register): Switch to completely different
+ algorithm to deal with lame-ass monitors which put spaces in the
+ middle of numbers, and prompt with a space!!!!!
+ * (monitor_read_memory_single): New routine to be used with
+ monitors that can only return one byte/short/long at a time. This
+ is selected via MO_GETMEM_READ_SINGLE.
+ * (monitor_load_srec): Use monitor_printf_noecho for sending S
+ records. Most targets don't echo them.
+ * (monitor.h): Get rid of cmd_delim. Add line_delim.
+ * op50n-rom.c (op50n_cmds): Fill it up. Make it work.
+ * w89k-rom.c: Change all eols from \r to \n. Change load_resp to
+ ^Q to prevent error message.
+ * config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special
+ instruction sequence at end to make restore_pc_queue happy.
+
+Wed May 10 15:59:00 1995 Torbjorn Granlund <tege@adder.cygnus.com>
+
+ * remote-est.c (est_open): Make static to match prototype.
+
Tue May 9 16:58:50 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* configure.in: Add little endian PowerPC support.
projects / deliverable / binutils-gdb.git / blobdiff