+2015-08-11 Keith Seitz <keiths@redhat.com>
+
+ * ax-gdb.c: Include location.h.
+ (agent_command_1) Use linespec location instead of address
+ string.
+ * break-catch-throw.c: Include location.h.
+ (re_set_exception_catchpoint): Use linespec locations instead
+ of address strings.
+ * breakpoint.c: Include location.h.
+ (create_overlay_event_breakpoint, create_longjmp_master_breakpoint)
+ (create_std_terminate_master_breakpoint)
+ (create_exception_master_breakpoint, update_breakpoints_after_exec):
+ Use linespec location instead of address string.
+ (print_breakpoint_location): Use locations and
+ event_location_to_string.
+ Print extra_string for pending locations for non-MI streams.
+ (print_one_breakpoint_location): Use locations and
+ event_location_to_string.
+ (init_raw_breakpoint_without_location): Initialize b->location.
+ (create_thread_event_breakpoint): Use linespec location instead of
+ address string.
+ (init_breakpoint_sal): Likewise.
+ Only save extra_string if it is non-NULL and not the empty string.
+ Use event_location_to_string instead of `addr_string'.
+ Constify `p' and `endp'.
+ Use skip_spaces_const/skip_space_const instead of non-const versions.
+ Copy the location into the breakpoint.
+ If LOCATION is NULL, save the breakpoint address as a linespec location
+ instead of an address string.
+ (create_breakpoint_sal): Change `addr_string' parameter to a struct
+ event_location. All uses updated.
+ (create_breakpoints_sal): Likewise for local variable `addr_string'.
+ (parse_breakpoint_sals): Use locations instead of address strings.
+ Remove check for empty linespec with conditional.
+ Refactor.
+ (decode_static_tracepoint_spec): Make argument const and update
+ function.
+ (create_breakpoint): Change `arg' to a struct event_location and
+ rename.
+ Remove `copy_arg' and `addr_start'.
+ If EXTRA_STRING is empty, set it to NULL.
+ Don't populate `canonical' for pending breakpoints.
+ Pass `extra_string' to find_condition_and_thread.
+ Clear `extra_string' if `rest' was NULL.
+ Do not error with "garbage after location" if setting a dprintf
+ breakpoint.
+ Copy the location into the breakpoint instead of an address string.
+ (break_command_1): Use string_to_event_location and pass this to
+ create_breakpoint instead of an address string.
+ Check against `arg_cp' for a probe linespec.
+ (dprintf_command): Use string_to_event_location and pass this to
+ create_breakpoint instead of an address string.
+ Throw an exception if no format string was specified.
+ (print_recreate_ranged_breakpoint): Use event_location_to_string
+ instead of address strings.
+ (break_range_command, until_break_command)
+ (init_ada_exception_breakpoint): Use locations instead
+ of address strings.
+ (say_where): Print out extra_string for pending locations.
+ (base_breakpoint_dtor): Delete `location' and `location_range_end' of
+ the breakpoint.
+ (base_breakpoint_create_sals_from_location): Use struct event_location
+ instead of address string.
+ Remove `addr_start' and `copy_arg' parameters.
+ (base_breakpoint_decode_location): Use struct event_location instead of
+ address string.
+ (bkpt_re_set): Use locations instead of address strings.
+ Use event_location_empty_p to check for unset location.
+ (bkpt_print_recreate): Use event_location_to_string instead of
+ an address string.
+ Print out extra_string for pending locations.
+ (bkpt_create_sals_from_location, bkpt_decode_location)
+ (bkpt_probe_create_sals_from_location): Use struct event_location
+ instead of address string.
+ (bkpt_probe_decode_location): Use struct event_location instead of
+ address string.
+ (tracepoint_print_recreate): Use event_location_to_string to
+ recreate the tracepoint.
+ (tracepoint_create_sals_from_location, tracepoint_decode_location)
+ (tracepoint_probe_create_sals_from_location)
+ (tracepoint_probe_decode_location): Use struct event_location
+ instead of address string.
+ (dprintf_print_recreate): Use event_location_to_string to recreate
+ the dprintf.
+ (dprintf_re_set): Remove check for valid/missing format string.
+ (strace_marker_create_sals_from_location)
+ (strace_marker_create_breakpoints_sal, strace_marker_decode_location)
+ (update_static_tracepoint): Use struct event_location instead of
+ address string.
+ (location_to_sals): Likewise.
+ Pass `extra_string' to find_condition_and_thread.
+ For newly resolved pending breakpoint locations, clear the location's
+ string representation.
+ Assert that the breakpoint's condition string is NULL when
+ condition_not_parsed.
+ (breakpoint_re_set_default, create_sals_from_location_default)
+ (decode_location_default, trace_command, ftrace_command)
+ (strace_command, create_tracepoint_from_upload): Use locations
+ instead of address strings.
+ * breakpoint.h (struct breakpoint_ops) <create_sals_from_location>:
+ Use struct event_location instead of address string.
+ Update all uses.
+ <decode_location>: Likewise.
+ (struct breakpoint) <addr_string>: Change to struct event_location
+ and rename `location'.
+ <addr_string_range_end>: Change to struct event_location and rename
+ `location_range_end'.
+ (create_breakpoint): Use struct event_location instead of address
+ string.
+ * cli/cli-cmds.c: Include location.h.
+ (edit_command, list_command): Use locations instead of address strings.
+ * elfread.c: Include location.h.
+ (elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string.
+ * guile/scm-breakpoint.c: Include location.h.
+ (bpscm_print_breakpoint_smob): Use event_location_to_string.
+ (gdbscm_register_breakpoint): Use locations instead of address
+ strings.
+ * linespec.c: Include location.h.
+ (struct ls_parser) <stream>: Change to const char *.
+ (PARSER_STREAM): Update.
+ (lionespec_lexer_lex_keyword): According to find_condition_and_thread,
+ keywords must be followed by whitespace.
+ (canonicalize_linespec): Save a linespec location into `canonical'.
+ Save a canonical linespec into `canonical'.
+ (parse_linespec): Change `argptr' to const char * and rename `arg'.
+ All uses updated.
+ Update function description.
+ (linespec_parser_new): Initialize `parser'.
+ Update initialization of parsing stream.
+ (event_location_to_sals): New function.
+ (decode_line_full): Change `argptr' to a struct event_location and
+ rename it `location'.
+ Use locations instead of address strings.
+ Call event_location_to_sals instead of parse_linespec.
+ (decode_line_1): Likewise.
+ (decode_line_with_current_source, decode_line_with_last_displayed)
+ Use locations instead of address strings.
+ (decode_objc): Likewise.
+ Change `argptr' to const char * and rename `arg'.
+ (destroy_linespec_result): Delete the linespec result's location
+ instead of freeing the address string.
+ * linespec.h (struct linespec_result) <addr_string>: Change to
+ struct event_location and rename to ...
+ <location>: ... this.
+ (decode_line_1, decode_line_full): Change `argptr' to struct
+ event_location. All callers updated.
+ * mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h.
+ (mi_cmd_break_insert_1): Use locations instead of address strings.
+ Throw an error if there was "garbage" at the end of the specified
+ linespec.
+ * probe.c: Include location.h.
+ (parse_probes): Change `argptr' to struct event_location.
+ Use event locations instead of address strings.
+ * probe.h (parse_probes): Change `argptr' to struct event_location.
+ * python/py-breakpoint.c: Include location.h.
+ (bppy_get_location): Constify local variable `str'.
+ Use event_location_to_string.
+ (bppy_init): Use locations instead of address strings.
+ * python/py-finishbreakpoint.c: Include location.h.
+ (bpfinishpy_init): Remove local variable `addr_str'.
+ Use locations instead of address strings.
+ * python/python.c: Include location.h.
+ (gdbpy_decode_line): Use locations instead of address strings.
+ * remote.c: Include location.h.
+ (remote_download_tracepoint): Use locations instead of address
+ strings.
+ * spu-tdep.c: Include location.h.
+ (spu_catch_start): Remove local variable `buf'.
+ Use locations instead of address strings.
+ * tracepoint.c: Include location.h.
+ (scope_info): Use locations instead of address strings.
+ (encode_source_string): Constify parameter `src'.
+ * tracepoint.h (encode_source_string): Likewise.
+
+2015-08-11 Keith Seitz <keiths@redhat.com>
+
+ * Makefile.in (SFILES): Add location.c.
+ (HFILES_NO_SRCDIR): Add location.h.
+ (COMMON_OBS): Add location.o.
+ * linespec.c (linespec_lex_to_end): New function.
+ * linespec.h (linespec_lex_to_end): Declare.
+ * location.c: New file.
+ * location.h: New file.
+
+2015-08-11 Keith Seitz <keiths@redhat.com>
+
+ * breakpoint.h (struct breakpoint_ops) <create_sals_from_address>:
+ Renamed to create_sals_from_location.
+ <decode_linespec>: Renamed to decode_location.
+ Update all callers.
+ * breakpoint.c (create_sals_from_address_default): Renamed to ...
+ (create_sals_from_location_default): ... this.
+ (addr_string_to_sals): Renamed to ...
+ (location_to_sals): ... this.
+ (decode_linespec_default): Renamed to ...
+ (decode_location_default): ... this.
+ (base_breakpoint_create_sals_from_address): Renamed to ...
+ (base_breakpoint_create_sals_from_location): ... this.
+ (bkpt_create_sals_from_address): Renamed to ...
+ (bkpt_create_sals_from_location): ... this.
+ (bkpt_decode_linespec): Renamed to ...
+ (bkpt_decode_location): ... this.
+ (bkpt_probe_create_sals_from_address): Renamed to ...
+ (bkpt_probe_create_sals_from_location): ... this.
+ (tracepoint_create_sals_from_address): Renamed to ...
+ (tracepoint_create_sals_from_location): ... this.
+ (tracepoint_decode_linespec): Renamed to ...
+ (tracepoint_decode_location): ... this.
+ (tracepoint_probe_create_sals_from_address): Renamed to ...
+ (tracepoint_probe_create_sals_from_location): ... this.
+ (tracepoint_probe_decode_linespec): Renamed to ...
+ (tracepoint_probe_decode_location): ... this.
+ (strace_marker_create_sals_from_address): Renamed to ...
+ (strace_marker_create_sals_from_location): ... this.
+ (decode_linespec_default): Renamed to ...
+ (decode_location_default): ... this.
+
+2015-08-10 Doug Evans <dje@google.com>
+ Keith Seitz <keiths@redhat.com>
+
+ PR gdb/17960
+ * symtab.c (make_file_symbol_completion_list_1): Renamed from
+ make_file_symbol_completion_list and made static.
+ (make_file_symbol_completion_list): New function.
+
+2015-08-10 Joel Brobecker <brobecker@adacore.com>
+
+ * infrun.c (follow_fork, displaced_step_prepare, resume): Remove
+ trailing new-line at end of warning message.
+ (proceed): Add i18n marker to error messages.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * linux-nat.c (linux_nat_always_non_stop_p): Return 1.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * s390-linux-tdep.c (is_non_branch_ril)
+ (s390_displaced_step_copy_insn): New functions.
+ (s390_displaced_step_fixup): Update comment.
+ (s390_gdbarch_init): Install s390_displaced_step_copy_insn as
+ gdbarch_displaced_step_copy_insn hook.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * infrun.c (displaced_step_prepare_throw): Return -1 if
+ gdbarch_displaced_step_copy_insn returns NULL. Update intro
+ comment.
+ * rs6000-tdep.c (LWARX_MASK, LWARX_INSTRUCTION, LDARX_INSTRUCTION)
+ (STWCX_MASK, STWCX_INSTRUCTION, STDCX_INSTRUCTION): Move higher up
+ in file.
+ (ppc_displaced_step_copy_insn): New function.
+ (ppc_displaced_step_fixup): Update comment.
+ (rs6000_gdbarch_init): Install ppc_displaced_step_copy_insn as
+ gdbarch_displaced_step_copy_insn hook.
+ * gdbarch.sh (displaced_step_copy_insn): Document what happens on
+ NULL return.
+ * gdbarch.h: Regenerate.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * inferior.h (struct inferior) <displaced_stepping_failed>: New
+ field.
+ * infrun.c (use_displaced_stepping_now_p): New parameter 'inf'.
+ Return false if dispaced stepping failed before.
+ (resume): Pass the current inferior to
+ use_displaced_stepping_now_p. Wrap displaced_step_prepare in
+ TRY/CATCH. If we get a MEMORY_ERROR, set the inferior's
+ displaced_stepping_failed flag, and fall back to an in-line
+ step-over.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * darwin-nat.c (darwin_stop): Rename to ...
+ (darwin_interrupt): ... this.
+ (_initialize_darwin_inferior): Adjust.
+ * gnu-nat.c (gnu_stop): Delete.
+ (gnu_target): Don't install gnu_stop.
+ * inf-ptrace.c (inf_ptrace_stop): Rename to ...
+ (inf_ptrace_interrupt): ... this.
+ (inf_ptrace_target): Adjust.
+ * infcmd.c (interrupt_target_1): Use target_interrupt instead of
+ target_stop.
+ * linux-nat (linux_nat_stop): Rename to ...
+ (linux_nat_interrupt): ... this.
+ (linux_nat_stop): Reimplement.
+ (linux_nat_add_target): Install linux_nat_interrupt.
+ * nto-procfs.c (nto_interrupt_twice): Rename to ...
+ (nto_handle_sigint_twice): ... this.
+ (nto_interrupt): Rename to ...
+ (nto_handle_sigint): ... this. Call target_interrupt instead of
+ target_stop.
+ (procfs_wait): Adjust.
+ (procfs_stop): Rename to ...
+ (procfs_interrupt): ... this.
+ (init_procfs_targets): Adjust.
+ * procfs.c (procfs_stop): Rename to ...
+ (procfs_interrupt): ... this.
+ (procfs_target): Adjust.
+ * remote-m32r-sdi.c (m32r_stop): Rename to ...
+ (m32r_interrupt): ... this.
+ (init_m32r_ops): Adjust.
+ * remote-sim.c (gdbsim_stop_inferior): Rename to ...
+ (gdbsim_interrupt_inferior): ... this.
+ (gdbsim_stop): Rename to ...
+ (gdbsim_interrupt): ... this.
+ (gdbsim_cntrl_c): Adjust.
+ (init_gdbsim_ops): Adjust.
+ * remote.c (sync_remote_interrupt): Adjust comments.
+ (remote_stop_as): Rename to ...
+ (remote_interrupt_as): ... this.
+ (remote_stop): Adjust comment.
+ (remote_interrupt): New function.
+ (init_remote_ops): Install remote_interrupt.
+ * target.c (target_interrupt): New function.
+ * target.h (struct target_ops) <to_interrupt>: New field.
+ (target_interrupt): New declaration.
+ * windows-nat.c (windows_stop): Rename to ...
+ (windows_interrupt): ... this.
+ * target-delegates.c: Regenerate.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * signal-while-stepping-over-bp-other-thread.exp: Expect "restart
+ threads" as alternative to "switching back to stepped thread".
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * NEWS: Mention "maint set/show target-non-stop".
+ * breakpoint.c (update_global_location_list): Check
+ target_is_non_stop_p instead of non_stop.
+ * infcmd.c (attach_command_post_wait, attach_command): Likewise.
+ * infrun.c (show_can_use_displaced_stepping)
+ (can_use_displaced_stepping_p, start_step_over_inferior):
+ Likewise.
+ (internal_resume_ptid): New function.
+ (resume): Use it.
+ (proceed): Check target_is_non_stop_p instead of non_stop. If in
+ all-stop mode but the target is always in non-stop mode, start all
+ the other threads that are implicitly resumed too.
+ (for_each_just_stopped_thread, fetch_inferior_event)
+ (adjust_pc_after_break, stop_all_threads): Check
+ target_is_non_stop_p instead of non_stop.
+ (handle_inferior_event): Likewise. Handle detach-fork in all-stop
+ with the target always in non-stop mode.
+ (handle_signal_stop) <random signal>: Check target_is_non_stop_p
+ instead of non_stop.
+ (switch_back_to_stepped_thread): Check target_is_non_stop_p
+ instead of non_stop.
+ (keep_going_stepped_thread): Use internal_resume_ptid.
+ (stop_waiting): If in all-stop mode, and the target is in non-stop
+ mode, stop all threads.
+ (keep_going_pass): Likewise, when starting a new in-line step-over
+ sequence.
+ * linux-nat.c (get_pending_status, select_event_lwp)
+ (linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check
+ target_is_non_stop_p instead of non_stop.
+ (linux_nat_always_non_stop_p): New function.
+ (linux_nat_stop): Check target_is_non_stop_p instead of non_stop.
+ (linux_nat_add_target): Install linux_nat_always_non_stop_p.
+ * target-delegates.c: Regenerate.
+ * target.c (target_is_non_stop_p): New function.
+ (target_non_stop_enabled, target_non_stop_enabled_1): New globals.
+ (maint_set_target_non_stop_command)
+ (maint_show_target_non_stop_command): New functions.
+ (_initilize_target): Install "maint set/show target-non-stop"
+ commands.
+ * target.h (struct target_ops) <to_always_non_stop_p>: New field.
+ (target_non_stop_enabled): New declaration.
+ (target_is_non_stop_p): New declaration.
+
+2015-08-07 Pedro Alves <pedro@codesourcery.com>
+
+ * breakpoint.c (breakpoints_should_be_inserted_now): If any thread
+ has a pending status, return true.
+ * gdbthread.h: Include target/waitstatus.h.
+ (struct thread_suspend_state) <stop_reason, waitstatus_pending_p,
+ stop_pc>: New fields.
+ (struct thread_info) <resumed>: New field.
+ (set_resumed): Declare.
+ * infrun.c: Include "event-loop.h".
+ (infrun_async_inferior_event_token, infrun_is_async): New globals.
+ (infrun_async): New function.
+ (clear_step_over_info): Add debug output.
+ (displaced_step_in_progress_any_inferior): New function.
+ (displaced_step_fixup): New returns int.
+ (start_step_over): Handle in-line step-overs too. Assert the
+ thread is marked resumed.
+ (resume_cleanups): Clear the thread's resumed flag.
+ (resume): Set the thread's resumed flag. Return early if the
+ thread has a pending status. Allow stepping a breakpoint with no
+ signal.
+ (proceed): Adjust to check 'resumed' instead of 'executing'.
+ (clear_proceed_status_thread): If the thread has a pending status,
+ and that status is a finished step, discard the pending status.
+ (clear_proceed_status): Don't clear step_over_info here.
+ (random_pending_event_thread, do_target_wait): New functions.
+ (prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use
+ do_target_wait.
+ (wait_one): New function.
+ (THREAD_STOPPED_BY): New macro.
+ (thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
+ (thread_stopped_by_hw_breakpoint): New functions.
+ (switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New
+ functions.
+ (handle_inferior_event): Also call set_resumed(false) on all
+ threads implicitly stopped by the event.
+ (restart_threads, resumed_thread_with_pending_status): New
+ functions.
+ (finish_step_over): If we were doing an in-line step-over before,
+ and no longer are after trying to start a new step-over, restart
+ all threads. If we have multiple threads with pending events,
+ save the current event and go through the event loop again.
+ (handle_signal_stop): Return early if finish_step_over returns
+ false.
+ <random signal>: If we get a signal while stepping over a
+ breakpoint in-line in non-stop mode, restart all threads. Clear
+ step_over_info before delivering the signal.
+ (keep_going_stepped_thread): Use internal_error instead of
+ gdb_assert. Mark the thread as resumed.
+ (keep_going_pass_signal): Assert the thread isn't already resumed.
+ If some other thread is doing an in-line step-over, defer the
+ resume. If we just started a new in-line step-over, stop all
+ threads. Don't clear step_over_info.
+ (infrun_async_inferior_event_handler): New function.
+ (_initialize_infrun): Create async event handler with
+ infrun_async_inferior_event_handler as callback.
+ (infrun_async): New declaration.
+ * target.c (target_async): New function.
+ * target.h (target_async): Declare macro and readd as function
+ declaration.
+ * target/waitstatus.h (enum target_stop_reason)
+ <TARGET_STOPPED_BY_SINGLE_STEP>: New value.
+ * thread.c (new_thread): Clear the new waitstatus field.
+ (set_resumed): New function.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * infrun.c (keep_going_stepped_thread): New function, factored out
+ from ...
+ (switch_back_to_stepped_thread): ... here.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * infrun.c (currently_stepping): Extend intro comment.
+ * target.h (target_resume): Extend intro comment.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * infrun.c (switch_back_to_stepped_thread): Use ecs->ptid instead
+ of inferior_ptid. If the stepped thread vanished, return 0
+ instead of resuming here. Use reset_ecs. Print the prev_pc and
+ the current stop_pc in log message. Clear trap_expected if the
+ thread advanced. Don't pass currently_stepping to
+ do_target_resume.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * gdbthread.h (struct thread_info) <prev_pc>: Extend comment.
+ * infrun.c (struct execution_control_state): Move higher up in the
+ file.
+ (reset_ecs): New function.
+ (start_step_over): Now returns int. Rewrite to use
+ keep_going_pass_signal instead of manually starting a displaced step.
+ (resume): Don't call set_running here. If displaced stepping
+ can't start now, clear trap_expected.
+ (find_thread_needs_step_over): Delete function.
+ (proceed): Set up finish_thread_state_cleanup. Call set_running.
+ If the current thread needs a step over, push it in the step-over
+ chain. Don't set insert breakpoints nor call resume directly
+ here. Instead rewrite to use start_step_over and
+ keep_going_pass_signal.
+ (finish_step_over): New function.
+ (handle_signal_stop): Call finish_step_over instead of
+ start_step_over.
+ (switch_back_to_stepped_thread): If the event thread needs another
+ step-over do that first. Use start_step_over.
+ (keep_going_pass_signal): New function, factored out from ...
+ (keep_going): ... here.
+ (_initialize_infrun): Comment moved here.
+ * thread.c (set_running_thread): New function.
+ (set_running, finish_thread_state): Use set_running_thread.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * gdbthread.h (struct thread_info) <step_over_prev,
+ step_over_next>: New fields.
+ (thread_step_over_chain_enqueue, thread_step_over_chain_remove)
+ (thread_step_over_chain_next, thread_is_in_step_over_chain): New
+ declarations.
+ * infrun.c (struct displaced_step_request): Delete.
+ (struct displaced_step_inferior_state) <step_request_queue>:
+ Delete field.
+ (displaced_step_prepare): Assert that trap_expected is set. Use
+ thread_step_over_chain_enqueue. Split starting a new displaced
+ step to ...
+ (start_step_over): ... this new function.
+ (resume): Assert the thread isn't waiting for a step over already.
+ (proceed): Assert the thread isn't waiting for a step over
+ already.
+ (infrun_thread_stop_requested): Adjust to remove threads from the
+ embedded step-over chain.
+ (handle_inferior_event) <fork/vfork>: Call start_step_over after
+ displaced_step_fixup.
+ (handle_signal_stop): Call start_step_over after
+ displaced_step_fixup.
+ * infrun.h (step_over_queue_head): New declaration.
+ * thread.c (step_over_chain_enqueue, step_over_chain_remove)
+ (thread_step_over_chain_next, thread_is_in_step_over_chain)
+ (thread_step_over_chain_enqueue)
+ (thread_step_over_chain_remove): New functions.
+ (delete_thread_1): Remove thread from the step-over chain.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * infrun.c (thread_still_needs_step_over): Rename to ...
+ (thread_still_needs_step_over_bp): ... this.
+ (enum step_over_what): New.
+ (thread_still_needs_step_over): Reimplement.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * remote.c (remote_wait_as): If not waiting for a stop reply,
+ return TARGET_WAITKIND_NO_RESUMED. If TARGET_WNOHANG is
+ requested, don't block waiting forever.
+
+2015-08-07 Pedro Alves <pedro@codesourcery.com>
+
+ * infrun.c (adjust_pc_after_break): Now takes thread_info and
+ waitstatus pointers instead of an ecs. Adjust.
+ (handle_inferior_event): Adjust caller.
+
+2015-08-07 Pedro Alves <palves@redhat.com>
+
+ * infrun.c (handle_inferior_event): If we get
+ TARGET_WAITKIND_SIGNALLED or TARGET_WAITKIND_EXITED in non-stop
+ mode, mark all threads of the exiting process as not-executing.
+ (normal_stop): If we get TARGET_WAITKIND_SIGNALLED or
+ TARGET_WAITKIND_EXITED in non-stop mode, finish all threads of the
+ exiting process, if inferior_ptid still points at a process.
+ * thread.c (struct current_thread_cleanup) <next>: New field.
+ (current_thread_cleanup_chain): New global.
+ (restore_current_thread_ptid_changed): New function.
+ (restore_current_thread_cleanup_dtor): Remove the cleanup from the
+ current_thread_cleanup_chain list.
+ (make_cleanup_restore_current_thread): Add the cleanup data to the
+ current_thread_cleanup_chain list.
+ (_initialize_thread): Install restore_current_thread_ptid_changed
+ as thread_ptid_changed observer.
+
+2015-08-07 Joel Brobecker <brobecker@adacore.com>
+
+ * dtrace-probe.c (dtrace_process_dof): Ignore the objfile's DOF
+ data if a DTRACE_DOF_SECT_TYPE_PROVIDER section is found to be
+ smaller than expected.
+
+2015-08-07 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * stack.c (get_frame_language): Moved ...
+ * frame.c (get_frame_language): ... to here.
+ * language.h (get_frame_language): Declaration moved to frame.h.
+ * frame.h: Add language.h include, for language enum.
+ (get_frame_language): Declaration moved from language.h.
+ * language.c: Add frame.h include.
+ * top.c: Add frame.h include.
+ * symtab.h (struct obj_section): Declare.
+ (struct cmd_list_element): Declare.
+
+2015-08-07 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * language.c (show_language_command): Find selected frame before
+ asking for the language of that frame.
+ (set_language_command): Likewise.
+ * language.h (get_frame_language): Add frame parameter.
+ * stack.c (get_frame_language): Add frame parameter, assert
+ parameter is not NULL, update comment and reindent.
+ * top.c (check_frame_language_change): Pass the selected frame
+ into get_frame_language.
+
+2015-08-07 Markus Metzger <markus.t.metzger@intel.com>
+
+ * btrace.c (btrace_compute_ftrace_bts): Clear insn flags.
+ (pt_btrace_insn_flags): New.
+ (ftrace_add_pt): Call pt_btrace_insn_flags.
+ * btrace.h (btrace_insn_flag): New.
+ (btrace_insn) <flags>: New.
+ * record-btrace.c (btrace_insn_history): Print insn prefix.
+ * NEWS: Announce it.
+
+2015-08-07 Markus Metzger <markus.t.metzger@intel.com>
+
+ * configure.ac: Check for PERF_ATTR_SIZE_VER5 in linux/perf_event.h
+ * configure: Regenerate.
+
+2015-08-06 Yaakov Selkowitz <yselkowi@redhat.com>
+
+ * Makefile.in (LIBICONV): Define.
+ (CLIBS): Add LIBICONV.
+ * acinclude.m4: Use config/iconv.m4 instead of custom AM_ICONV.
+ * configure: Regenerate.
+
+2015-08-06 Simon Marchi <simon.marchi@ericsson.com>
+ Pedro Alves <palves@redhat.com>
+
+ * arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum.
+ (arm_set_abi): Likewise.
+ * ax-general.c (ax_print): Likewise.
+ * c-exp.y (exp : string_exp): Likewise.
+ * compile/compile-loc2c.c (compute_stack_depth_worker): Likewise.
+ (do_compile_dwarf_expr_to_c): Likewise.
+ * cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start):
+ Likewise.
+ * dwarf2expr.c (execute_stack_op): Likewise.
+ * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
+ (disassemble_dwarf_expression): Likewise.
+ * dwarf2read.c (dwarf2_add_member_fn): Likewise.
+ (read_array_order): Likewise.
+ (abbrev_table_read_table): Likewise.
+ (read_attribute_value): Likewise.
+ (skip_unknown_opcode): Likewise.
+ (dwarf_decode_macro_bytes): Likewise.
+ (dwarf_decode_macros): Likewise.
+ * eval.c (value_f90_subarray): Likewise.
+ * guile/scm-param.c (gdbscm_make_parameter): Likewise.
+ * i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
+ * infrun.c (handle_command): Likewise.
+ * memory-map.c (memory_map_start_memory): Likewise.
+ * osabi.c (set_osabi): Likewise.
+ * parse.c (operator_length_standard): Likewise.
+ * ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use
+ single return point.
+ * python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
+ * python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
+ (gdbpy_lookup_global_symbol): Likewise.
+ * record-full.c (record_full_restore): Likewise.
+ * regcache.c (regcache_register_status): Likewise.
+ (regcache_raw_read): Likewise.
+ (regcache_cooked_read): Likewise.
+ * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
+ * symtab.c (initialize_ordinary_address_classes): Likewise.
+ * target-debug.h (target_debug_print_signals): Likewise.
+ * utils.c (do_restore_current_language): Likewise.
+
+2015-08-06 Clem Dickey <clemd@acm.org>
+
+ PR python/17136
+ * python/lib/gdb/command/type_printers.py (InfoTypePrinter): Fix typo.
+
2015-08-06 Simon Marchi <simon.marchi@ericsson.com>
* complaints.c (enum complaint_series): Add newlines and remove
2015-08-05 Pedro Alves <palves@redhat.com>
Joel Brobecker <brobecker@adacore.com>
- * breakpoint.c (bpstat_what) <bp_longjmp, bp_longjmp_call_dummy>
+ * breakpoint.c (bpstat_what) <bp_longjmp, bp_longjmp_call_dummy>
<bp_exception, bp_longjmp_resume, bp_exception_resume>: Handle the
case where BS->STOP is not set.
instead of integer.
2015-07-31 Simon Marchi <simon.marchi@ericsson.com>
+ Pedro Alves <palves@redhat.com>
* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
type or value instead of integer.
projects / deliverable / binutils-gdb.git / blobdiff