* remote-mips.c (_initialize_remote_mips): Fix DDB doc string.
-start-sanitize-d30v
Sun Dec 21 17:00:06 1997 David Taylor <taylor@texas.cygnus.com>
* d30v-tdep.c (d30v_frame_find_saved_regs): split most of
(d30v_frame_find_saved_regs): set it.
* config/d30v/tm-d30v.h: improved FRAME_CHAIN_VALID
-end-sanitize-d30v
Thu Dec 18 12:34:28 1997 Andrew Cagney <cagney@b1.cygnus.com>
From Gavin Koch <gavin@cygnus.com>: mips-tdep.c
Tue Dec 16 20:05:48 1997 Mark Alexander <marka@cygnus.com>
* configure.tgt: Change little-endian tx39 target name to tx39l.
-start-sanitize-tx19
- * configure.tgt: Change little-endian tx19 target name to tx19l.
-end-sanitize-tx19
Tue Dec 16 11:24:30 1997 Jeffrey A Law (law@cygnus.com)
* remote-sim.c (gdbsim_open): Use "--architecture" instead of
ambigious short form.
-start-sanitize-d30v
Tue Dec 16 10:29:16 1997 David Taylor <taylor@texas.cygnus.com>
* d30v-tdep.c (d30v_frame_chain): don't or in DMEM_START to
* config/tm-d30v.h (EXTRACT_STRUCT_VALUE_ADDRESS): fix, it's r2,
not r0; (FRAME_CHAIN_VALID): handle use of external memory;
(STACK_ALIGN): define.
-end-sanitize-d30v
Mon Dec 15 15:13:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (configdirs): Check for sigaction.
* configure: Re-generate.
-start-sanitize-tx49
- From Gavin Koch <gavin@cygnus.com>:
- * config/mips/tx49el.mt : New file.
- * config/mips/tm-tx49.h : New file.
- * config/mips/tm-tx49el.h : New file.
- * configure.tgt: Changed to use the new files for
- mips64*tx49*-*-elf* and mips64*tx49*el-*-elf*
-
-end-sanitize-tx49
Mon Dec 15 11:38:52 1997 Andrew Cagney <cagney@b1.cygnus.com>
* dwarf2read.c: From change proposed by Gavin Koch.
* dwarf2read.c (dwarf_decode_lines): Change type of address to
CORE_ADDR.
-start-sanitize-tic80
Thu Dec 11 22:39:02 1997 Mark Alexander <marka@cygnus.com>
From change made to branch by Bob Manson <manson@cygnus.com>:
* tic80-tdep.c (tic80_push_arguments): The compiler always
passes structs by reference.
-end-sanitize-tic80
Thu Dec 11 14:28:01 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
* tracepoint.c (trace_find_command): don't error if going
backwards thru the trace buffer in a loop.
* (struct tracepoint): delete unused field.
-start-sanitize-d30v
Wed Dec 10 17:57:00 1997 David Taylor <taylor@texas.cygnus.com>
* d30v-tdep.c : don't bury lots of magic numbers in the code
STACK_START; change FR_REGNUM to 61 (was 11). Reformat comment
about DUMMY FRAMES so that it is readable. Fix SAVED_PC_AFTER_FRAME
macro.
-start-sanitize-d30v
Wed Dec 10 17:41:07 1997 Jim Blandy <jimb@zwingli.cygnus.com>
assembly-language" command. Replaced by generic "set
architecture". Set initial machine using bfd_lookup_arch.
-start-sanitize-vr5400
-Sun Nov 23 16:23:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
-
- * configure.tgt (gdb_target): Treat vr5400 as a vr5000.
-
-end-sanitize-vr5400
Fri Nov 21 19:43:23 1997 Jim Blandy <jimb@zwingli.cygnus.com>
* valops.c (call_function_by_hand): If the function has a
* jv-exp.y (copy_exp, insert_exp): Avoid ANSI prototypes.
-start-sanitize-d30v
Thu Nov 13 09:47:35 1997 Michael Meissner <meissner@cygnus.com>
* d30v-tdep.c (d30v_print_flags): Function to print the d30v flags
* config/d30v/tm-d30v.h (PSW_*): Add macros for each of the PSW
bits that are defined.
-end-sanitize-d30v
Wed Nov 12 14:58:39 1997 Jeff Holcomb <jeffh@cygnus.com>
* jv-exp.y (ArrayAccess): Implement Name [ Expression ]; check the
code to see why this is not trivial.
(copy_exp, insert_exp): New functions.
-
+
Fri Oct 24 17:24:00 1997 Dawn Perchik <dawn@cygnus.com>
* dwarf2read.c (dwarf2_build_psymtabs_hard): Handle the case
has DW_children_no).
(scan_partial_symbols): Add comment for nesting_level.
-start-sanitize-tx49
-Wed Oct 29 17:45:43 1997 Gavin Koch <gavin@cygnus.com>
-
- * configure.tgt: Add tx49 configury based on 4300.
-
-end-sanitize-tx49
Wed Oct 29 15:53:24 1997 David Taylor <taylor@texas.cygnus.com>
* solib.c (solib_break_names): add entry for Solaris 2.6 run
(MIPS_FPU_SINGLE_REGSIZE, MIPS_FPU_DOUBLE_REGSIZE): Define.
* mips-tdep.c (mips_extract_return_value): Doubles aren't
returned in FP0 if FP registers are single-precision only.
-start-sanitize-r5900
- * config/mips/tm-r5900.h (MIPS_LAST_FP_ARG_REGNUM): Redefine
- to disable use of FP registers for function arguments.
-end-sanitize-r5900
Mon Sep 29 23:03:03 1997 Mark Alexander <marka@cygnus.com>
Tue Sep 30 13:35:54 1997 Andrew Cagney <cagney@b1.cygnus.com>
-start-sanitize-r5900
- * config/mips/tm-r5900.h (REGISTER_NAMES, NUM_REGS): Overridei
- instead of define.
-
- * config/mips/tm-r5900.h (REGISTER_NAMES): Define.
- (NUM_REGS): Ditto.
-
-end-sanitize-r5900
* config/mips/tm-mips.h (NUM_REGS): Define conditionally.
(REGISTER_NAMES): Ditto.
calculating frame address.
* remote-sim.c (gdbsim_fetch_register): Don't fetch registers
that have a null or empty name.
-start-sanitize-tx19
- * config/mips/tm-tx19.h (MIPS_DEFAULT_FPU_TYPE): Define.
- (REGISTER_NAMES): Redefine to eliminate FP registers.
- * config/mips/tm-tx19l.h: Ditto.
-end-sanitize-tx19
Fri Sep 26 12:40:51 1997 Jeffrey A Law (law@cygnus.com)
- Michael Snyder (msnyder@cleaver.cygnus.com)
-start-sanitize-r5900
- * configure.tgt: Set gdb_target to r5900.
- * config/mips/tm-r5900.h, config/mips/r5900.mt: New files
-end-sanitize-r5900
* mips-tdep.c (_initialize_mips_tdep): Allow target files to
override default FPU type.
* remote-sim.c: New functions gdbsim_insert/remove_breakpoint. Use
intrinsic simulator breakpoints if available, otherwise do it the
hard way.
-start-sanitize-d30v
+
* configure.tgt: Add d30v.
* d30v-tdep.c: New file.
* config/d30v/d30v.mt, config/d30v/tm-d30v.h: New files.
-end-sanitize-d30v
Tue Sep 23 11:24:13 1997 Stan Shebs <shebs@andros.cygnus.com>
"special" MIPS16 bit in ELF and minimal symbols.
* mdebugread.c (parse_partial_symbols): Don't construct a partial
symbol table for a file that already has one.
-start-sanitize-tx19
- * configure.tgt: Support TX19.
- * config/mips/tm-tx19.h, config/mips/tm-tx19l.h, config/mips/tx19.mt,
- config/mips/tx19l.mt: New files for TX19.
-end-sanitize-tx19
Sat Sep 13 08:32:13 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
(child_wait): Check the return value of handle_exception. Set the
continue_status argument to ContinueDebugEvent accordingly.
-Mon Aug 18 11:14:15 1997 Nick Clifton <nickc@cygnus.com>
-
- * configure.tgt: Add support for v850e target.
-
-start-sanitize-v850e
Mon Aug 18 11:14:15 1997 Nick Clifton <nickc@cygnus.com>
* configure.tgt: Add support for v850ea target.
-end-sanitize-v850e
Sun Aug 17 20:31:57 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
Fri Aug 8 21:35:44 1997 Mark Alexander <marka@cygnus.com>
-start-sanitize-tic80
* config/tic80/tic80.mt:
(GDBSERVER-DEPFILES, GDBSERVER_LIBS): Define for gdbserver.
(SIM): Remove -lm to prevent make errors.
* configure.tgt: add gdbserver to configdirs for tic80.
-end-sanitize-tic80
* gdbserver/utils.c (error): Change prototype to match defs.h.
* gdbserver/low-sim.c: Change simulator calls to use new interface.
* remote.c (remote_write_bytes): Include '$' at start of packet
(_initialize_bdm_ppc): new
* config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines
-start-sanitize-tic80
Tue Aug 5 23:56:14 1997 Mark Alexander <marka@cygnus.com>
* tic80-tdep.c (tic80_init_extra_frame_info): Allow zero
as a valid SP-relative offset of a saved register.
-end-sanitize-tic80
Wed Aug 6 00:24:08 1997 Jeffrey A Law (law@cygnus.com)
* hpread.c (hpread_read_struct_type): Use accessor macros rather
* v850ice.c: Include <windows.h>. Support new v850 DLL interface.
* Add defs for target status.
-
Tue Jul 22 12:11:48 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
* config/mips/tm-mips64.h: longs, long longs, and pointers
(mips_store_return_value): handle values smaller than MIPS_REGSIZE
(including structs, if gdb ever allows it).
-start-sanitize-sh4
Fri Jun 20 17:58:34 1997 Fred Fish <fnf@cygnus.com>
* sh-tdep.c (sh_skip_prologue): Also recognize fmov insns.
stack push count accordingly.
* sh-tdep.c (IS_FMOV, FPSCR_SZ): New defines
-end-sanitize-sh4
Thu Jun 19 08:18:48 1997 Mark Alexander <marka@cygnus.com>
* utils.c (floatformat_from_doublest): Improve test for infinity.
symbols to find the end of the prologue.
* mn10300-tdep.c (mn10300_skip_prologue): Likewise.
-start-sanitize-tic80
Wed May 14 12:04:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
* config/tic80/tm-tic80.h (NUM_REGS): 38 not 37.
-end-sanitize-tic80
-start-sanitize-tic80
Mon May 12 11:35:04 1997 Mark Alexander <marka@cygnus.com>
* tic80-tdep.c, config/tic80/tm-tic80.h: First cut at getting
basic C80 features working.
-end-sanitize-tic80
Thu May 8 08:42:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (AC_TYPE_SIGNAL): Add
* printcmd.c (disassemble_command): Adjust low function bound
by FUNCTION_START_OFFSET.
-start-sanitize-tic80
Wed Apr 30 15:23:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
* config/tic80/tm-tic80.h (BREAKPOINT): Set it to trap 73.
-end-sanitize-tic80
Mon Apr 28 21:25:32 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
* Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd)
Mon Apr 28 17:27:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
- * c-exp.y, java-exp.y: make parse_number reject "123DEADBEEF".
+ * c-exp.y: make parse_number reject "123DEADBEEF".
(fix by Bob Manson).
+ * java-exp.y: Ditto.
* top.c: change "to enable to enable" to "to enable" in a couple
of help strings.
* mn10300-tdep.c (mn10300_analyze_prologue): Check for a return
insn at "pc", not "fi->pc".
-start-sanitize-tic80
Thu Apr 24 16:11:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
* config/tic80/tm-tic80.h (NUM_REGS): Four 64bit accumulators.
(R0_REGNUM, Rn_REGNUM, An_REGNUM): For sim, provide base/bound for
register blocks.
-end-sanitize-tic80
Wed Apr 23 11:18:45 1997 Jeffrey A Law (law@cygnus.com)
* config/mn10200/tm-mn10200.h (STORE_RETURN_VALUE): Pointers are
(floatformat_from_doublest): Postswap output words for
the floatformat_littlebyte_bigwords format.
-start-sanitize-tic80
Mon Apr 21 22:44:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
* config/tic80/tic80.mt (SIM): Link in simulator.
-end-sanitize-tic80
Tue Apr 22 09:02:10 1997 Stu Grossman (grossman@critters.cygnus.com)
* config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh
* remote-pa.c: Remove. It's broken and no longer necessary.
-Sat Apr 19 11:56:10 1997 Per Bothner <bothner@deneb.cygnus.com>
+ Sat Apr 19 11:56:10 1997 Per Bothner <bothner@deneb.cygnus.com>
* java-exp.y: Combine TRUE and FALSE into BOOLEAN_LITERAL.
(Avoids name clash with broken AIX header files.)
Thu Apr 17 14:30:04 1997 Per Bothner <bothner@deneb.cygnus.com>
+ * objfiles.c (allocate_objfile): Allow NULL bfd argument.
* defs.h (enum language): Add language_java.
* java-exp.y, java-lang.c, java-lang.h, java-valprint.c: New files.
* Makefile.in: Update for new files.
- * objfiles.c (allocate_objfile): Allow NULL bfd argument.
* symfile.c (deduce_language_from_filename): Recognize .java.
Thu Apr 17 02:20:23 1997 Doug Evans <dje@canuck.cygnus.com>
* configure.in: Generate .gdbinit from gdbinit.in.
* configure: Rebuild.
-start-sanitize-tic80
Sun Mar 30 12:28:24 1997 Fred Fish <fnf@cygnus.com>
* config/tic80/tic80.mt: Disable using the simulator
until it is ready.
-end-sanitize-tic80
Sat Mar 29 13:57:20 1997 Fred Fish <fnf@cygnus.com>
* COPYING: Install new version of file from FSF.
* Makefile.in (distclean): Remove .gdbinit.
-start-sanitize-tic80
Fri Mar 28 15:37:30 1997 Fred Fish <fnf@cygnus.com>
* config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.
-end-sanitize-tic80
Fri Mar 28 15:38:04 1997 Mike Meissner <meissner@cygnus.com>
* remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
* remote-sim.c (simulator_command): Add comment about dealing with
NULL or empty args.
-start-sanitize-tic80
* Makefile.in (tic80-tdep.o): Add target.
* configure.tgt: Add tic80 case.
* tic80-tdep.c: New file.
* config/tic80/{tic80.mt, tm-tic80.h}: New files.
-end-sanitize-tic80
Sat Mar 22 02:48:11 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
(USE_STRUCT_CONVENTION): Use for args > 8 bytes.
(REG_STRUCT_HAS_ADDR): Define.
-start-sanitize-r5900
-Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
-
- * configure.tgt: added r5900.
-
-end-sanitize-r5900
Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
* mips-tdep.c (non_heuristic_proc_desc): New function.