-# Makefile for GDB
-# Copyright (C) 1986, 1988 Free Software Foundation, Inc.
+M_MAKEFILE=./tconfig/none ./xconfig/none
+srcdir=.
+# "no target".
+# This can be used to build you a Makefile that only runs administrative
+# commands like 'clean', 'gdb.tar.Z', etc.
+# Target config file for "no target". This can be used to build you
+# a Makefile that only runs administrative commands like 'clean',
+# 'gdb.tar.Z', etc.
#
-#GDB is distributed in the hope that it will be useful, but WITHOUT ANY
-#WARRANTY. No author or distributor accepts responsibility to anyone
-#for the consequences of using it or for whether it serves any
-#particular purpose or works at all, unless he says so in writing.
-#Refer to the GDB General Public License for full details.
-#
-#Everyone is granted permission to copy, modify and redistribute GDB,
-#but only under the conditions described in the GDB General Public
-#License. A copy of this license is supposed to have been given to you
-#along with GDB so you can know your rights and responsibilities. It
-#should be in a file named COPYING. Among other things, the copyright
-#notice and this notice must be preserved on all copies.
-#
-#In other words, go ahead and share GDB, but don't try to stop
-#anyone else from sharing it farther. Help stamp out software hoarding!
+# Copyright (C) 1990 Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# GDB is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 1, or (at your option)
+# any later version.
+
+# GDB is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with GDB; see the file COPYING. If not, write to
+# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ALLDEPFILES = $(ALLDEPFILES_MAINDIR) $(ALLDEPFILES_SUBDIR)
+ALLDEPFILES_MAINDIR=\
+altos-xdep.c\
+am29k-pinsn.c\
+am29k-tdep.c\
+arm-convert.s\
+arm-pinsn.c\
+arm-tdep.c\
+arm-xdep.c\
+convex-pinsn.c\
+convex-tdep.c\
+convex-xdep.c\
+coredep.c\
+exec.c\
+gould-pinsn.c\
+gould-xdep.c\
+hp300ux-xdep.c\
+i386-pinsn.c\
+i386-tdep.c\
+i386-xdep.c\
+i960-pinsn.c\
+i960-tdep.c\
+infptrace.c\
+m68k-pinsn.c\
+m68k-tdep.c\
+m88k-pinsn.c\
+m88k-tdep.c\
+m88k-xdep.c\
+mips-pinsn.c\
+mips-tdep.c\
+mips-xdep.c\
+mipsread.c\
+news-xdep.c\
+nindy-tdep.c\
+ns32k-pinsn.c\
+pyr-pinsn.c\
+pyr-tdep.c\
+pyr-xdep.c\
+remote-eb.c\
+remote-nindy.c\
+remote-vx.c\
+solib.c\
+sparc-pinsn.c\
+sparc-tdep.c\
+sparc-xdep.c\
+sun3-xdep.c\
+sun386-xdep.c\
+symm-tdep.c\
+symm-xdep.c\
+tdesc.c\
+umax-xdep.c\
+vax-pinsn.c
+
+ALLDEPFILES_SUBDIR=\
+nindy-share/Onindy.c\
+nindy-share/nindy.c\
+nindy-share/ttybreak.c\
+nindy-share/ttyflush.c\
+vx-share/xdr_ld.c\
+vx-share/xdr_ptrace.c\
+vx-share/xdr_rdb.c\
+vx-share/xdr_regs.c
+
+ALLPARAM=\
+tm-29k.h\
+tm-3b1.h\
+tm-88k.h\
+tm-altos.h\
+tm-altosgas.h\
+tm-arm.h\
+tm-bigmips.h\
+tm-convex.h\
+tm-hp300bsd.h\
+tm-hp300hpux.h\
+tm-i386v-g.h\
+tm-i386v.h\
+tm-isi.h\
+tm-merlin.h\
+tm-mips.h\
+tm-news.h\
+tm-nindy960.h\
+tm-np1.h\
+tm-pn.h\
+tm-pyr.h\
+tm-sparc.h\
+tm-sun2.h\
+tm-sun2os4.h\
+tm-sun3.h\
+tm-sun386.h\
+tm-sun3os4.h\
+tm-sun4os4.h\
+tm-symmetry.h\
+tm-umax.h\
+tm-vax.h\
+tm-vx68.h\
+tm-vx960.h\
+xm-3b1.h\
+xm-88k.h\
+xm-altos.h\
+xm-arm.h\
+xm-bigmips.h\
+xm-convex.h\
+xm-hp300bsd.h\
+xm-hp300hpux.h\
+xm-i386v.h\
+xm-i386v32.h\
+xm-isi.h\
+xm-merlin.h\
+xm-mips.h\
+xm-news.h\
+xm-news1000.h\
+xm-np1.h\
+xm-pn.h\
+xm-pyr.h\
+xm-sparc.h\
+xm-sun2.h\
+xm-sun3.h\
+xm-sun386.h\
+xm-sun3os4.h\
+xm-sun4os4.h\
+xm-symmetry.h\
+xm-umax.h\
+xm-vax.h
+
+ALLCONFIG=\
+./tconfig/3b1\
+./tconfig/CVS.adm\
+./tconfig/altos\
+./tconfig/altosgas\
+./tconfig/am29k\
+./tconfig/arm\
+./tconfig/bigmips\
+./tconfig/convex\
+./tconfig/hp300bsd\
+./tconfig/hp300hpux\
+./tconfig/i386v\
+./tconfig/i386v-g\
+./tconfig/i386v32\
+./tconfig/i386v32-g\
+./tconfig/i960\
+./tconfig/isi\
+./tconfig/littlemips\
+./tconfig/m88k\
+./tconfig/m88k.orig\
+./tconfig/merlin\
+./tconfig/news\
+./tconfig/news1000\
+./tconfig/nindy960\
+./tconfig/none\
+./tconfig/np1\
+./tconfig/pn\
+./tconfig/pyramid\
+./tconfig/sun2os3\
+./tconfig/sun2os4\
+./tconfig/sun3\
+./tconfig/sun386\
+./tconfig/sun3os3\
+./tconfig/sun3os4\
+./tconfig/sun4\
+./tconfig/sun4os3\
+./tconfig/sun4os4\
+./tconfig/symmetry\
+./tconfig/umax\
+./tconfig/vax\
+./tconfig/vxworks68\
+./tconfig/vxworks960\
+./xconfig/3b1\
+./xconfig/CVS.adm\
+./xconfig/altos\
+./xconfig/altosgas\
+./xconfig/arm\
+./xconfig/bigmips\
+./xconfig/convex\
+./xconfig/hp300bsd\
+./xconfig/hp300hpux\
+./xconfig/i386v\
+./xconfig/i386v-g\
+./xconfig/i386v32\
+./xconfig/i386v32-g\
+./xconfig/isi\
+./xconfig/littlemips\
+./xconfig/m88k\
+./xconfig/m88k.orig\
+./xconfig/merlin\
+./xconfig/news\
+./xconfig/news1000\
+./xconfig/none\
+./xconfig/np1\
+./xconfig/pn\
+./xconfig/pyramid\
+./xconfig/sun2os3\
+./xconfig/sun2os4\
+./xconfig/sun3\
+./xconfig/sun386\
+./xconfig/sun3os3\
+./xconfig/sun3os4\
+./xconfig/sun4\
+./xconfig/sun4os3\
+./xconfig/sun4os4\
+./xconfig/symmetry\
+./xconfig/umax\
+./xconfig/vax
+
+##Copyright (C) 1989-1991 Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# GDB is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 1, or (at your option)
+# any later version.
+
+# GDB is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with GDB; see the file COPYING. If not, write to
+# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+# Place to install binaries.
+bindir=/usr/local/bin
+
+# System V: If you compile gdb with a compiler which uses the coff
+# encapsulation feature (this is a function of the compiler used, NOT
+# of the m-?.h file selected by config.gdb), you must make sure that
+# the GNU nm is the one that is used by munch.
+
+# If you are compiling with GCC, make sure that either 1) You use the
+# -traditional flag, or 2) You have the fixed include files where GCC
+# can reach them. Otherwise the ioctl calls in inflow.c and readline.c
+# will be incorrectly compiled. The "fixincludes" script in the gcc
+# distribution will fix your include files up.
+#CC=cc
+#CC=gcc -traditional
+GCC=gcc
+
+VPATH=$(srcdir)
+
+# It is also possible that you will need to add -I/usr/include/sys to the
+# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
+# is where it should be according to Posix).
+
+YACC=bison -y
+# YACC=yacc
+SHELL=/bin/sh
+MAKE=make
+# We need either GNU m4 or SysV m4; Berkeley/Sun don't have quite enough.
+#M4=gm4
+M4=/usr/5bin/m4
+
+# Set this up with gcc if you have gnu ld and the loader will print out
+# line numbers for undefinded refs.
+#CC-LD=gcc -static
+CC-LD=${CC}
+
+# define this to be "gmalloc.o" if you want to use the gnu malloc routine
+# (useful for debugging memory allocation problems in gdb). To use your
+# system malloc, uncomment the following two lines.
+#GNU_MALLOC =
+#MALLOC_CFLAGS = -DNO_MALLOC_CHECK
+GNU_MALLOC = gmalloc.o mcheck.o mtrace.o
+MALLOC_CFLAGS =
+
+# Where is the "include" directory? Traditionally ../include or ./include
+INCLUDE_DIR = ${srcdir}/../include
+INCLUDE_DEP = $$(INCLUDE_DIR)
+# Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
+# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
+BFD_DIR = ${srcdir}/../bfd
+BFD_DEP = $$(BFD_DIR)
-# On HPUX, you need to add -Ihpux to CFLAGS.
-# The headers in the subdir hpux override system headers
-# and tell GDB to use BSD executable file format.
-# You also need to add -lGNU to CLIBS, and perhaps CC = gcc.
+# All the includes used for CFLAGS and for lint.
+# -I. for config files.
+# -I${srcdir} possibly for regex.h also.
+INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I${srcdir}/vx-share
-# -I. for "#include <obstack.h>"
-CFLAGS = -g -I.
-# NOTE!!! -O may FAIL TO WORK! See initialize.h for some weird hacks.
+# {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
+# CFLAGS for both GDB and readline.
+GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS}
+#PROFILE_CFLAGS = -pg
-# define this to be "obstack.o" if you don't have the obstack library installed
-# you must at the same time define OBSTACK1 as "obstack.o"
-# so that the dependencies work right.
-OBSTACK = obstack.o
-OBSTACK1 = obstack.o
+CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
+# None of the things in CFLAGS will do any harm, and on some systems
+# (e.g. SunOS4) it is important to use the M_CFLAGS.
+LDFLAGS = $(CFLAGS)
-CLIBS = $(OBSTACK)
+# Where is the "-liberty" library, containing getopt and obstack?
+LIBIBERTY_DIR = ${srcdir}/../libiberty
+LIBIBERTY = ${LIBIBERTY_DIR}${subdir}/libiberty.a
-STARTOBS = main.o firstfile.o
+# Flags that describe where you can find the termcap library.
+# You may need to make other arrangements for USG.
+TERMCAP = -ltermcap
-OBS = blockframe.o breakpoint.o findvar.o stack.o source.o \
+# You must define REGEX and REGEX1 on USG machines.
+# If your sysyem is missing alloca(), or, more likely, it's there but
+# it doesn't work, define ALLOCA & ALLOCA1
+
+# {X,T}M_CLIBS, if defined, has system-dependent libs
+# For example, -lPW for System V to get alloca().
+# FIXME STOPGAP FOR BFD LIBRARY: BFD stuff
+CLIBS = ${TERMCAP} $(XM_CLIBS) ${TM_CLIBS} ${BFD_DIR}${subdir}/libbfd.a \
+ ${LIBIBERTY}
+CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_DIR}/libbfd.a \
+ ${LIBIBERTY}
+
+ADD_FILES = ${REGEX} ${ALLOCA} ${GNU_MALLOC}
+ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC}
+
+VERSION = 3.95
+DIST=gdb-$(VERSION)
+
+LINT=/usr/5bin/lint
+LINTFLAGS=
+
+# Source files in the main directory.
+# Files which are included via a tconfig/* or xconfig/* file
+# should *not* be specified here; they're in "ALLDEPFILES".
+SFILES_MAINDIR = \
+ blockframe.c breakpoint.c command.c core.c \
+ environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
+ main.c printcmd.c \
+ remote.c source.c stack.c symmisc.c symtab.c symfile.c \
+ utils.c valarith.c valops.c valprint.c values.c expread.y \
+ signame.c cplus-dem.c mem-break.c target.c inftarg.c \
+ dbxread.c coffread.c \
+ ieee-float.c
+
+# Source files in subdirectories (which will be handled separately by
+# 'make gdb.tar.Z').
+# Files which are included via a tconfig/* or xconfig/* file
+# should *not* be specified here; they're in "ALLDEPFILES".
+SFILES_SUBDIR = \
+ ${srcdir}/vx-share/dbgRpcLib.h \
+ ${srcdir}/vx-share/ptrace.h \
+ ${srcdir}/vx-share/reg.h \
+ ${srcdir}/vx-share/vxTypes.h \
+ ${srcdir}/vx-share/vxWorks.h \
+ ${srcdir}/vx-share/wait.h \
+ ${srcdir}/vx-share/xdr_ld.h \
+ ${srcdir}/vx-share/xdr_ptrace.h \
+ ${srcdir}/vx-share/xdr_rdb.h \
+ ${srcdir}/vx-share/xdr_regs.h \
+ ${srcdir}/nindy-share/Makefile \
+ ${srcdir}/nindy-share/VERSION \
+ ${srcdir}/nindy-share/b.out.h \
+ ${srcdir}/nindy-share/block_io.h \
+ ${srcdir}/nindy-share/coff.h \
+ ${srcdir}/nindy-share/demux.h \
+ ${srcdir}/nindy-share/env.h \
+ ${srcdir}/nindy-share/stop.h \
+ ${srcdir}/nindy-share/ttycntl.h
+
+# All source files that go into linking GDB, except config-specified files.
+SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
+
+# All source files that lint should look at
+LINTFILES = $(SFILES) expread.tab.c init.c
+
+# Any additional files specified on these lines should also be added to
+# the OTHERS = definition below, so they go in the tar files.
+SFILES_STAND = $(SFILES) standalone.c
+SFILES_KGDB = $(SFILES) stuff.c kdb-start.c
+
+# Header files that are not named in tconfig/* or xconfig/* go here.
+HFILES= breakpoint.h command.h defs.h environ.h \
+ expression.h frame.h gdbcmd.h gdbcore.h \
+ getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
+ signals.h signame.h symfile.h symtab.h \
+ target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
+ value.h
+
+OPCODES = pn-opcode.h np1-opcode.h sparc-opcode.h vax-opcode.h m68k-opcode.h \
+ ns32k-opcode.h convx-opcode.h pyr-opcode.h mips-opcode.h \
+ am29k-opcode.h
+
+REMOTE_EXAMPLES = rem-m68k.shar rem-multi.shar
+
+MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \
+ ansidecl.h stdlib.h gmalloc.h stddef.h
+
+POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC)
+POSSLIBS = $(POSSLIBS_MAINDIR)
+
+TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
+
+# tdesc-lib cannot be named simply tdesc, because if if it were GNU make
+# would try to make it from tdesc.c.
+# tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
+OTHERS = Makefile.dist depend alldeps.mak Makefile.sdir \
+ createtags munch config.gdb config.status \
+ ChangeLog ChangeLog-3.x \
+ README TODO TAGS WHATS.NEW \
+ doc \
+ .gdbinit COPYING expread.tab.c stab.def \
+ copying.c Projects Convex.notes copying.awk \
+ saber.suppress standalone.c stuff.c kdb-start.c \
+ hp-include # tests
+
+DEPFILES= ${TDEPFILES} ${XDEPFILES}
+
+SOURCES=$(SFILES) $(ALLDEPFILES)
+TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
+TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
+ ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
+TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
+
+OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
values.o eval.o valops.o valarith.o valprint.o printcmd.o \
- symtab.o symmisc.o coffread.o dbxread.o infcmd.o infrun.o remote.o
+ symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
+ command.o utils.o expread.o expprint.o environ.o version.o \
+ copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
+ inftarg.o ieee-float.o putenv.o \
+ dbxread.o coffread.o # mipsread.o
+
+RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
TSOBS = core.o inflow.o
NTSOBS = standalone.o
-ENDOBS = lastfile.o command.o utils.o expread.o expprint.o pinsn.o \
- environ.o version.o
-
TSSTART = /lib/crt0.o
NTSSTART = kdb-start.o
-gdb : $(STARTOBS) $(OBS) $(TSOBS) $(ENDOBS) $(OBSTACK1)
- $(CC) $(LDFLAGS) -o gdb $(STARTOBS) $(OBS) $(TSOBS) $(ENDOBS) $(CLIBS)
-
-xgdb : $(STARTOBS) $(OBS) $(TSOBS) xgdb.o $(ENDOBS) $(OBSTACK1)
- $(CC) $(LDFLAGS) -o xgdb $(STARTOBS) $(OBS) $(TSOBS) xgdb.o $(ENDOBS) \
- -lXaw -lXt -lX11 $(CLIBS)
-
-kdb : $(NTSSTART) $(STARTOBS) $(OBS) $(NTSOBS) $(ENDOBS) $(OBSTACK1)
- ld -o kdb $(NTSSTART) $(STARTOBS) $(OBS) $(NTSOBS) $(ENDOBS) -lc $(CLIBS)
-
-blockframe.o : blockframe.c defs.h initialize.h param.h symtab.h frame.h
-breakpoint.o : breakpoint.c defs.h initialize.h param.h symtab.h frame.h
-command.o : command.c command.h
-coffread.o : coffread.c defs.h initialize.h param.h symtab.h
-core.o : core.c defs.h initialize.h param.h
-dbxread.o : dbxread.c defs.h initialize.h param.h symtab.h
-environ.o : environ.c environ.h
-expprint.o : expprint.c defs.h symtab.h expression.h
-expread.tab.c : expread.y
- @echo 'Expect 96 shift/reduce conflicts.'
- yacc expread.y
- mv y.tab.c expread.tab.c
-expread.o : expread.tab.c defs.h param.h symtab.h frame.h expression.h
- $(CC) -c ${CFLAGS} expread.tab.c
+RL_LIB = readline/libreadline.a
+RL_LIB_DEP = $(RL_LIB)
+
+# Prevent Sun make from putting in the machine type. Setting
+# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
+.c.o:
+ ${CC} -c ${CFLAGS} $<
+
+all: gdb
+
+install: gdb
+ cp gdb $(bindir)/gdb.new
+ mv $(bindir)/gdb.new $(bindir)/gdb
+ $(M_INSTALL)
+
+init.c: $(srcdir)/munch $(MUNCH_DEFINE) $(OBS) $(TSOBS)
+ $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
+
+gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${RL_LIB_DEP} ${CDEPS} init.o
+ ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
+ ${RL_LIB} $(CLIBS)
+
+saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
+ #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
+ #load ./init.c $(SFILES)
+ #unload ${srcdir}/expread.y ${srcdir}/vx-share/*.h
+ #unload ${srcdir}/nindy-share/[A-Z]*
+ #load ${srcdir}/expread.tab.c readline/libreadline.a
+ #load copying.c version.c
+ #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
+ #load ${LIBIBERTY_DIR}/*.c
+ #load ${BFD_DIR}/*.c
+ #load -ltermcap
+ ##void mcheck(a) void (*a)(); { }
+ ##void mtrace() { }
+
+
+
+# This is useful when debugging GDB, because some Unix's don't let you run GDB
+# on itself without copying the executable. So "make gdb1" will make
+# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
+# Removing gdb1 before the copy is the right thing if gdb1 is open
+# in another process.
+gdb1: gdb
+ rm -f gdb1
+ cp gdb gdb1
+
+# This is a remote stub which runs under unix and starts up an
+# inferior process. This is at least useful for debugging GDB's
+# remote support.
+rapp: $(RAPP_OBS)
+ rm -f rapp_init.c
+ ${srcdir}/munch ${RAPP_OBS} > rapp_init.c
+ ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
+
+Makefiles= Makefile.sdir $(M_MAKEFILE) \
+ ${srcdir}/alldeps.mak ${srcdir}/Makefile.dist
+
+MAKE_MAKEFILE= echo "M_MAKEFILE=$(M_MAKEFILE)" | \
+ cat - ${Makefiles} ${srcdir}/depend >Makefile
+
+Makefile: $(Makefiles)
+ $(MAKE_MAKEFILE)
+
+alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig
+ rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
+ for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
+ ${srcdir}/xconfig/*[0-9A-Za-z] | grep -v RCS` ; do \
+ echo $$i >>allconfig.tmp; \
+ awk <$$i ' \
+ $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
+ for (i = 2; i <= NF; i++) \
+ print $$i >> "alldeps.tmp" ; \
+ } \
+ $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
+ print $$2 >> "allparam.tmp" }' ; \
+ done
+ sort <alldeps.tmp | uniq | \
+ sed -e 's/arm-convert.o/arm-convert.s/' \
+ -e 's!^Onindy.o!nindy-share/Onindy.c!' \
+ -e 's!^nindy.o!nindy-share/nindy.c!' \
+ -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
+ -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
+ -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
+ -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
+ -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
+ -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
+ -e 's/\.o/.c/' \
+ >alldeps2.tmp
+ echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
+ >>alldeps.mak;
+ grep -v / alldeps2.tmp | \
+ awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
+ NR == 0 {printf $$0;} \
+ NR != 0 {printf "\\\n" $$0} \
+ END {printf "\n\n"}' >>alldeps.mak;
+ grep / alldeps2.tmp | \
+ awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
+ NR == 0 {printf $$0;} \
+ NR != 0 {printf "\\\n" $$0} \
+ END {printf "\n\n"}' >>alldeps.mak;
+ sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
+ NR == 0 {printf $$0;} \
+ NR != 0 {printf "\\\n" $$0} \
+ END {printf "\n\n"}' >>alldeps.mak;
+ sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
+ NR == 0 {printf $$0;} \
+ NR != 0 {printf "\\\n" $$0} \
+ END {printf "\n\n"}' >>alldeps.mak;
+ rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
+
+# The sed script makes everything which depends on {x,t}m.h depend on
+# config.status as well, in case someone reconfigures gdb out from
+# under an already compiled gdb.
+depend: $(SOURCES) Makefile.dist
+ @echo Ignore errors about non-existent system-supplied include files
+ @echo for systems other than the one you are using.
+ @echo "If xm.h and tm.h don't exist, the error messages saying so"
+ @echo can safely be ignored.
+ @echo Also ignore parse errors in valops.c, and any errors in
+ @echo arm-convert.s.
+ -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
+ `ls $(SOURCES) | sort -u` >depend.tmp
+ <depend.tmp sed -e 's/ [xt]m.h/& config.status/g' \
+ -e 's; vx-share/; $${srcdir}/vx-share/;g' \
+ -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
+ -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
+ -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
+ -e 's; \./; $${srcdir}/;g' \
+ >depend
+ $(MAKE_MAKEFILE)
+ rm depend.tmp
+
+config.status:
+ @echo "You must configure gdb. Look at the README file for details."
+ @false
+
+# These are not generated by "make depend" because they only are there
+# for some machines.
+# But these rules don't do what we want; we want to hack the foo.o: tm.h
+# dependency to do the right thing.
+tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h
+tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h
+xm-news1000.h : xm-news.h
+xm-i386-sv32.h : xm-i386.h
+tm-i386gas.h: tm-i386.h
+xm-sun4os4.h : xm-sparc.h
+tm-sun4os4.h : tm-sparc.h
+
+kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${RL_LIB_DEP}
+ rm -f init.c
+ $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
+ $(CC) $(LDFLAGS) -c init.c $(CLIBS)
+ ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
+ ${RL_LIB} -lc $(CLIBS)
+
+# Put the proper machine-specific files first.
+# createtags will edit the .o in DEPFILES into .c
+TAGS: ${TAGFILES}
+ $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
+tags: TAGS
+
+# FIXME: Get alldeps.mak up to date, config.gdb none, THEN make gdb.tar.Z!
+gdb.tar.Z: ${TARFILES}
+ rm -f gdb.tar; rm -rf $(DIST)
+ cd readline ; make readline.tar
+ mkdir $(DIST)
+ cd $(DIST) ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
+ mkdir $(DIST)/readline
+ cd $(DIST)/readline ; tar xf ../../readline/readline.tar
+ mkdir $(DIST)/xconfig ${DIST}/tconfig
+ cd $(DIST)/tconfig ; \
+ for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
+ mkdir $(DIST)/vx-share $(DIST)/nindy-share
+ cd $(DIST)/tconfig ; \
+ for i in $(SFILES_SUBDIR) $(ALLDEPFILES_SUBDIR); \
+ do ln -s ../../$$i ../$$i ; done
+ tar chf - $(DIST) | compress >gdb.tar.Z
+ rm -rf $(DIST)
+
+clean:
+ rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
+ rm -f init.c init.o version.c
+ rm -f gdb core gdb.tar gdb.tar.Z make.log
+ rm -f gdb[0-9]
+ rm -f gdb.dvi gdb-all*
+ cd readline ; make clean
+
+distclean: clean expread.tab.c TAGS
+ rm -f tm.h xm.h config.status
+ rm -f y.output yacc.acts yacc.tmp
+ rm -f ${TESTS} Makefile
+
+realclean: clean
+ rm -f expread.tab.c TAGS
+ rm -f tm.h xm.h config.status
+ rm -f Makefile
+
+gdb-all.texinfo: ${srcdir}/doc/gdb.texinfo
+ ${M4} $(srcdir)/doc/pretex.m4 $(srcdir)/doc/none.m4 $(srcdir)/doc/all.m4 $(srcdir)/doc/gdb.texinfo >gdb-all.texinfo
+
+gdb.dvi : gdb-all.texinfo
+ tex gdb-all.texinfo
+ texindex gdb-all.??
+ tex gdb-all.texinfo
+ mv gdb-all.dvi gdb.dvi
+ rm -f gdb-all.?? gdb-all.???
+
+# This should work eventually, but we're using texinfo2, and many makeinfo's
+# can't cope with all the markup. In the meantime, we distribute the info
+# files as formatted by the elisp texinfo2 code.
+#gdb.info: gdb-all.texinfo
+# makeinfo gdb-all.texinfo
+
+# Make copying.c from COPYING
+copying.c : COPYING copying.awk
+ awk -f copying.awk < COPYING > copying.c
+
+version.c : Makefile.dist
+ echo 'char *version = "$(VERSION)";' >version.c
+
+${srcdir}/expread.tab.c : $(srcdir)/expread.y
+ @echo 'Expect 4 shift/reduce conflict.'
+ ${YACC} $(srcdir)/expread.y
+ mv y.tab.c ${srcdir}/expread.tab.c
+
+expread.o : ${srcdir}/expread.tab.c defs.h param.h symtab.h \
+ frame.h expression.h
+ $(CC) -c ${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
mv expread.tab.o expread.o
-eval.o : eval.c defs.h initialize.h symtab.h value.h expression.h
-findvar.o : findvar.c defs.h initialize.h param.h symtab.h frame.h value.h
-firstfile.o : firstfile.c initialize.h
-infcmd.o : infcmd.c defs.h initialize.h param.h symtab.h frame.h inferior.h environ.h value.h
-inflow.o : inflow.c defs.h initialize.h param.h frame.h inferior.h
-infrun.o : infrun.c defs.h initialize.h param.h symtab.h frame.h inferior.h wait.h
-kdb-start.o : kdb-start.c defs.h param.h
-lastfile.o : lastfile.c
-main.o : main.c defs.h command.h
-# pinsn.o depends on ALL the opcode printers
-# since we don't know which one is really being used.
-pinsn.o : pinsn.c defs.h param.h symtab.h \
- vax-opcode.h vax-pinsn.c m68k-opcode.h m68k-pinsn.c
-printcmd.o : printcmd.c defs.h initialize.h param.h symtab.h value.h expression.h
-remote.o : remote.c defs.h initialize.h param.h frame.h inferior.h
-source.o : source.c defs.h initialize.h symtab.h
-stack.o : stack.c defs.h initialize.h param.h symtab.h frame.h
-standalone.o : standalone.c defs.h initialize.h param.h symtab.h frame.h inferior.h wait.h
-symmisc.o : symmisc.c defs.h initialize.h symtab.h
-symtab.o : symtab.c defs.h initialize.h param.h symtab.h
-utils.o : utils.c defs.h
-valarith.o : valarith.c defs.h initialize.h param.h symtab.h value.h expression.h
-valops.o : valops.c defs.h initialize.h param.h symtab.h value.h
-valprint.o : valprint.c defs.h initialize.h param.h symtab.h value.h
-values.o : values.c defs.h initialize.h param.h symtab.h value.h
-version.o : version.c
-xgdb.o : xgdb.c defs.h initialize.h param.h symtab.h frame.h
- $(CC) -c $(CFLAGS) xgdb.c -o $@
-
-obstack.o : obstack.c
+
+# dbxread, coffread, mipsread have dependencies on BFD header files.
+dbxread.o: ${srcdir}/dbxread.c
+ ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
+
+coffread.o: ${srcdir}/coffread.c
+ ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
+
+mipsread.o: ${srcdir}/mipsread.c
+ ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
+
+# Drag in the files that are in another directory.
+
+xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
+ ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c
+
+xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
+ ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
+
+xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
+ ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
+
+xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
+ ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c
+
+nindy.o: ${srcdir}/nindy-share/nindy.c
+ ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c
+
+Onindy.o: ${srcdir}/nindy-share/Onindy.c
+ ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c
+
+ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
+ ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c
+
+ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
+ ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
+
+tdesc-lib/libdc.o : force_update
+ cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
+
+# In LOCAL_INCLUDES, -I${srcdir} is right if srcdir is an absolute path,
+# and -I../${srcdir} is right if it is relative (e.g. ".."), so search both.
+readline/libreadline.a : force_update
+ cd readline ; ${MAKE} "SYSV=${SYSV_DEFINE}"\
+ "VPATH=${srcdir}/readline:../${srcdir}/readline"\
+ "LOCAL_INCLUDES=-I../ -I${srcdir}/ -I../${srcdir}/"\
+ "DEBUG_FLAGS=${GLOBAL_CFLAGS}" "CC=${CC}" libreadline.a
+
+lint: $(LINTFILES)
+ $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES)
+
+gdb.cxref: $(SFILES)
+ cxref -I. $(SFILES) >gdb.cxref
+
+force_update :
+
+# When used with GDB, the demangler should never look for leading
+# underscores because GDB strips them off during symbol read-in. Thus
+# -Dnounderscore.
+
+cplus-dem.o : cplus-dem.c
+ ${CC} -c ${CFLAGS} -Dnounderscore \
+ `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`
+altos-xdep.o : altos-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+am29k-pinsn.o : am29k-pinsn.c defs.h target.h am29k-opcode.h
+am29k-tdep.o : am29k-tdep.c defs.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h $(INCLUDE_DIR)/obstack.h frame.h param.h tm.h config.status \
+ param-no-tm.h xm.h config.status value.h symtab.h inferior.h breakpoint.h
+arm-pinsn.o : arm-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ arm-opcode.h
+arm-tdep.o : arm-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h arm-opcode.h gdbcore.h \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h
+arm-xdep.o : arm-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h arm-opcode.h gdbcore.h \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h
+blockframe.o : blockframe.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ frame.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h value.h \
+ target.h
+breakpoint.o : breakpoint.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ frame.h breakpoint.h value.h expression.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h gdbcmd.h command.h inferior.h target.h
+coffread.o : coffread.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ breakpoint.h value.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h symfile.h \
+ $(BFD_DIR)/libcoff.h
+command.o : command.c defs.h command.h symtab.h value.h
+convex-pinsn.o : convex-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ symtab.h convx-opcode.h
+convex-tdep.o : convex-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ command.h symtab.h value.h frame.h inferior.h breakpoint.h \
+ $(INCLUDE_DIR)/wait.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h \
+ gdbcmd.h
+convex-xdep.o : convex-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ command.h symtab.h value.h frame.h inferior.h breakpoint.h \
+ $(INCLUDE_DIR)/wait.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h \
+ gdbcmd.h
+core.o : core.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h inferior.h \
+ breakpoint.h value.h symtab.h command.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h target.h gdbcore.h
+coredep.o : coredep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status gdbcore.h \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h $(INCLUDE_DIR)/obstack.h
+cplus-dem.o : cplus-dem.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status
+dbxread.o : dbxread.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ $(INCLUDE_DIR)/a.out.gnu.h $(INCLUDE_DIR)/reloc.h $(INCLUDE_DIR)/stab.gnu.h \
+ $(INCLUDE_DIR)/stab.def symtab.h breakpoint.h value.h command.h target.h \
+ gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h $(BFD_DIR)/liba.out.h \
+ symfile.h
+environ.o : environ.c environ.h defs.h
+eval.o : eval.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h value.h \
+ expression.h target.h frame.h
+exec.o : exec.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h inferior.h \
+ breakpoint.h value.h symtab.h target.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+expprint.o : expprint.c defs.h symtab.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ expression.h value.h
+findvar.o : findvar.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ frame.h value.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h \
+ inferior.h breakpoint.h target.h
+gould-pinsn.o : gould-pinsn.c gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h $(INCLUDE_DIR)/obstack.h defs.h param.h tm.h config.status \
+ param-no-tm.h xm.h config.status symtab.h frame.h np1-opcode.h
+gould-xdep.o : gould-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+hp300ux-xdep.o : hp300ux-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ frame.h inferior.h breakpoint.h value.h symtab.h gdbcore.h \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h
+i386-pinsn.o : i386-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h $(INCLUDE_DIR)/obstack.h
+i386-tdep.o : i386-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+i386-xdep.o : i386-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+i960-pinsn.o : i960-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h
+i960-tdep.o : i960-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ value.h frame.h signame.h ieee-float.h
+ieee-float.o : ieee-float.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ ieee-float.h
+infcmd.o : infcmd.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h frame.h \
+ inferior.h breakpoint.h value.h environ.h gdbcmd.h command.h gdbcore.h \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h target.h
+inflow.o : inflow.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h command.h signals.h terminal.h \
+ target.h
+infptrace.o : infptrace.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h target.h gdbcore.h \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h
+infrun.o : infrun.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h frame.h \
+ inferior.h breakpoint.h value.h $(INCLUDE_DIR)/wait.h gdbcore.h \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h signame.h command.h terminal.h \
+ target.h
+inftarg.o : inftarg.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h target.h $(INCLUDE_DIR)/wait.h \
+ gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h ieee-float.h
+m68k-pinsn.o : m68k-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ m68k-opcode.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h
+m68k-tdep.o : m68k-tdep.c defs.h ieee-float.h
+main.o : main.c defs.h gdbcmd.h command.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ symtab.h inferior.h breakpoint.h value.h frame.h signals.h target.h
+mem-break.o : mem-break.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status
+mips-pinsn.o : mips-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ mips-opcode.h
+mips-tdep.o : mips-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h gdbcmd.h command.h gdbcore.h \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h
+mips-xdep.o : mips-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+mipsread.o : mipsread.c param.h tm.h config.status param-no-tm.h xm.h config.status \
+ $(INCLUDE_DIR)/obstack.h defs.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h symfile.h $(INCLUDE_DIR)/intel-coff.h
+news-xdep.o : news-xdep.c
+Onindy.o : ${srcdir}/nindy-share/Onindy.c ${srcdir}/nindy-share/ttycntl.h \
+ ${srcdir}/nindy-share/block_io.h $(INCLUDE_DIR)/wait.h ${srcdir}/nindy-share/env.h \
+ /usr/include/string.h
+nindy.o : ${srcdir}/nindy-share/nindy.c ${srcdir}/nindy-share/ttycntl.h ${srcdir}/nindy-share/block_io.h \
+ $(INCLUDE_DIR)/wait.h ${srcdir}/nindy-share/env.h /usr/include/string.h
+ttybreak.o : ${srcdir}/nindy-share/ttybreak.c ${srcdir}/nindy-share/ttycntl.h
+ttyflush.o : ${srcdir}/nindy-share/ttyflush.c ${srcdir}/nindy-share/ttycntl.h
+nindy-tdep.o : nindy-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ frame.h
+ns32k-pinsn.o : ns32k-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ symtab.h ns32k-opcode.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+printcmd.o : printcmd.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ symtab.h value.h expression.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h gdbcmd.h command.h target.h
+pyr-pinsn.o : pyr-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ pyr-opcode.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h
+pyr-tdep.o : pyr-tdep.c
+pyr-xdep.o : pyr-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+remote-eb.o : remote-eb.c defs.h tm-29k.h param-no-tm.h xm.h config.status inferior.h \
+ breakpoint.h value.h symtab.h frame.h param.h $(INCLUDE_DIR)/wait.h \
+ terminal.h target.h
+remote-nindy.o : remote-nindy.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ frame.h inferior.h breakpoint.h value.h symtab.h target.h gdbcore.h \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h command.h ieee-float.h \
+ $(INCLUDE_DIR)/wait.h ${srcdir}/nindy-share/ttycntl.h ${srcdir}/nindy-share/demux.h \
+ ${srcdir}/nindy-share/env.h ${srcdir}/nindy-share/stop.h
+remote-vx.o : remote-vx.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h $(INCLUDE_DIR)/wait.h target.h \
+ gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h command.h symfile.h \
+ ${srcdir}/vx-share/xdr_ptrace.h ${srcdir}/vx-share/xdr_regs.h ${srcdir}/vx-share/reg.h \
+ ${srcdir}/vx-share/xdr_ld.h ${srcdir}/vx-share/xdr_rdb.h ${srcdir}/vx-share/dbgRpcLib.h
+remote.o : remote.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h target.h $(INCLUDE_DIR)/wait.h \
+ terminal.h
+signame.o : signame.c signame.h defs.h param.h tm.h config.status param-no-tm.h xm.h config.status
+solib.o : solib.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h gdbcore.h \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h command.h target.h frame.h
+source.o : source.c defs.h symtab.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ command.h gdbcmd.h frame.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h regex.h
+sparc-pinsn.o : sparc-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ symtab.h sparc-opcode.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h /usr/include/string.h target.h
+sparc-tdep.o : sparc-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h signame.h target.h ieee-float.h \
+ gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h
+sparc-xdep.o : sparc-xdep.c defs.h tm-sparc.h param-no-tm.h xm.h config.status inferior.h \
+ breakpoint.h value.h symtab.h frame.h param.h target.h gdbcore.h \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h
+stack.o : stack.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h frame.h \
+ gdbcmd.h command.h value.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h target.h breakpoint.h
+sun3-xdep.o : sun3-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status inferior.h \
+ breakpoint.h value.h symtab.h frame.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+sun386-xdep.o : sun386-xdep.c
+symfile.o : symfile.c defs.h symtab.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h frame.h target.h \
+ value.h symfile.h gdbcmd.h command.h breakpoint.h
+symm-tdep.o : symm-tdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+symm-xdep.o : symm-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+symmisc.o : symmisc.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ breakpoint.h value.h command.h
+symtab.o : symtab.c defs.h symtab.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h frame.h target.h \
+ value.h symfile.h gdbcmd.h command.h
+target.o : target.c defs.h target.h gdbcmd.h command.h symtab.h inferior.h \
+ breakpoint.h value.h frame.h param.h tm.h config.status param-no-tm.h xm.h config.status \
+ $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h symfile.h
+tdesc.o : tdesc.c
+umax-xdep.o : umax-xdep.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status frame.h \
+ inferior.h breakpoint.h value.h symtab.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h
+utils.o : utils.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status signals.h gdbcmd.h \
+ command.h terminal.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h \
+ $(INCLUDE_DIR)/obstack.h target.h
+valarith.o : valarith.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status value.h \
+ symtab.h expression.h target.h
+valops.o : valops.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h value.h \
+ frame.h inferior.h breakpoint.h gdbcore.h $(INCLUDE_DIR)/bfd.h \
+ $(INCLUDE_DIR)/ansidecl.h target.h
+valprint.o : valprint.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ value.h gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h gdbcmd.h \
+ command.h target.h
+values.o : values.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h value.h \
+ gdbcore.h $(INCLUDE_DIR)/bfd.h $(INCLUDE_DIR)/ansidecl.h frame.h command.h \
+ gdbcmd.h
+vax-pinsn.o : vax-pinsn.c defs.h param.h tm.h config.status param-no-tm.h xm.h config.status symtab.h \
+ vax-opcode.h
+xdr_ld.o : ${srcdir}/vx-share/xdr_ld.c ${srcdir}/vx-share/vxWorks.h ${srcdir}/vx-share/vxTypes.h \
+ /usr/include/rpc/rpc.h ${srcdir}/vx-share/xdr_ld.h
+xdr_ptrace.o : ${srcdir}/vx-share/xdr_ptrace.c
+xdr_rdb.o : ${srcdir}/vx-share/xdr_rdb.c ${srcdir}/vx-share/vxWorks.h ${srcdir}/vx-share/vxTypes.h \
+ ${srcdir}/vx-share/xdr_rdb.h
+xdr_regs.o : ${srcdir}/vx-share/xdr_regs.c
projects / deliverable / binutils-gdb.git / blobdiff