DEPDIR = @DEPDIR@
depcomp = $(SHELL) $(srcdir)/../depcomp
-PWD_COMMAND = $${PWDCMD-pwd}
-
# Note that these are overridden by GNU make-specific code below if
# GNU make is used. The overrides implement dependency tracking.
COMPILE.pre = $(CC)
LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
-LIBCOMMON_DIR = common
-LIBCOMMON = $(LIBCOMMON_DIR)/libcommon.a
-LIBCOMMON_SRC = $(srcdir)/$(LIBCOMMON_DIR)
-
# Where is the READLINE library? Typically in ../readline.
READLINE_DIR = ../readline
READLINE_SRC = $(srcdir)/$(READLINE_DIR)
cli-dump.o \
cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
cli-logging.o \
- cli-interp.o
+ cli-interp.o cli-utils.o
SUBDIR_CLI_SRCS = \
cli/cli-dump.c \
cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
cli/cli-logging.c \
- cli/cli-interp.c
+ cli/cli-interp.c cli/cli-utils.c
SUBDIR_CLI_DEPS =
SUBDIR_CLI_LDFLAGS=
SUBDIR_CLI_CFLAGS=
# it doesn't work, then refer to libiberty.
# Libraries and corresponding dependencies for compiling gdb.
-# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
+# XM_CLIBS, defined in *config files, have host-dependent libs.
# LIBIBERTY appears twice on purpose.
-# If you have the Cygnus libraries installed,
-# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
-INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
- $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
- -lintl -liberty $(LIBGNU)
CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
$(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
$(LIBEXPAT) \
- $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBCOMMON)
+ $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
- $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU) \
- $(LIBCOMMON)
+ $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
c-lang.h d-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
-cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h \
+cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h cli/cli-utils.h \
cli/cli-script.h macrotab.h symtab.h version.h gnulib/wchar.in.h \
gnulib/string.in.h gnulib/str-two-way.h \
gnulib/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver/win32-low.h \
memattr.o mem-break.o target.o parse.o language.o buildsym.o \
findcmd.o \
std-regs.o \
+ signals.o \
exec.o reverse.o \
bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
dbxread.o coffread.o coff-pe-read.o \
# This is used to force build failures in existing trees when
# a new directory is added.
# The format here is for the `case' shell command.
-REQUIRED_SUBDIRS = doc | testsuite | gnulib | data-directory | common
+REQUIRED_SUBDIRS = doc | testsuite | gnulib | data-directory
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.c \
@$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
.PHONY: all-lib
-#
-$(LIBCOMMON): $(LIBCOMMON_DIR)/Makefile
- @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=common subdir_do
-
-configure-common:
- @: $(MAKE); $(unstage)
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- test ! -f common/Makefile || exit 0; \
- $(SHELL) $(srcdir)/../mkinstalldirs common ; \
- $(HOST_EXPORTS) \
- echo Configuring in common; \
- cd "common" || exit 1; \
- commondir="$$s/common"; \
- srcdiroption="--srcdir=$${commondir}"; \
- $(SHELL) $${commondir}/configure --enable-gdbserver=no \
- $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
- --target=${target_alias} $${srcdiroption} \
- || exit 1
-
# Convenience rule to handle recursion.
.PHONY: all-data-directory
all-data-directory: data-directory/Makefile
clean mostlyclean: $(CONFIG_CLEAN)
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
- rm -f init.c version.c
+ rm -f init.c version.c observer.h observer.inc
rm -f gdb$(EXEEXT) core make.log
rm -f gdb[0-9]$(EXEEXT)
rm -f test-cp-name-parser$(EXEEXT)
CONFIG_LINKS= \
$(SHELL) config.status
-common/Makefile: configure-common common/Makefile.in config.status @frags@
- CONFIG_FILES="common/Makefile" \
- CONFIG_COMMANDS="depfiles" \
- CONFIG_HEADERS= \
- CONFIG_LINKS= \
- $(SHELL) config.status
-
config.h: stamp-h ; @true
stamp-h: $(srcdir)/config.in config.status
CONFIG_HEADERS=config.h:config.in \
gnulib/m4/include_next.m4 \
gnulib/m4/longlong.m4 \
gnulib/m4/memchr.m4 \
- gnulib/m4/memcmp.m4 \
gnulib/m4/memmem.m4 \
gnulib/m4/onceonly_2_57.m4 \
gnulib/m4/stdint.m4 \
$(COMPILE) $(srcdir)/cli/cli-setshow.c
$(POSTCOMPILE)
+cli-utils.o: $(srcdir)/cli/cli-utils.c
+ $(COMPILE) $(srcdir)/cli/cli-utils.c
+ $(POSTCOMPILE)
+
#
# GDBTK sub-directory
$(COMPILE) $(srcdir)/mi/mi-common.c
$(POSTCOMPILE)
+# gdb/common/ dependencies
+#
+# Need to explicitly specify the compile rule as make will do nothing
+# or try to compile the object file into the sub-directory.
+
+signals.o: $(srcdir)/common/signals.c
+ $(COMPILE) $(srcdir)/common/signals.c
+ $(POSTCOMPILE)
+
#
# gdb/tui/ dependencies
#
projects / deliverable / binutils-gdb.git / blobdiff