DEPDIR = @DEPDIR@
depcomp = $(SHELL) $(srcdir)/../depcomp
-PWD_COMMAND = $${PWDCMD-pwd}
-
# Note that these are overridden by GNU make-specific code below if
# GNU make is used. The overrides implement dependency tracking.
COMPILE.pre = $(CC)
LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
-LIBCOMMON_DIR = common
-LIBCOMMON = $(LIBCOMMON_DIR)/libcommon.a
-LIBCOMMON_SRC = $(srcdir)/$(LIBCOMMON_DIR)
-
# Where is the READLINE library? Typically in ../readline.
READLINE_DIR = ../readline
READLINE_SRC = $(srcdir)/$(READLINE_DIR)
cli-dump.o \
cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
cli-logging.o \
- cli-interp.o
+ cli-interp.o cli-utils.o
SUBDIR_CLI_SRCS = \
cli/cli-dump.c \
cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
cli/cli-logging.c \
- cli/cli-interp.c
+ cli/cli-interp.c cli/cli-utils.c
SUBDIR_CLI_DEPS =
SUBDIR_CLI_LDFLAGS=
SUBDIR_CLI_CFLAGS=
tui-io.o \
tui-layout.o \
tui-out.o \
+ tui-main.o \
tui-regs.o \
tui-source.o \
tui-stack.o \
tui-win.o \
tui-windata.o \
tui-wingeneral.o \
- tui-winsource.o
+ tui-winsource.o \
+ tui.o
+
SUBDIR_TUI_SRCS = \
tui/tui-command.c \
tui/tui-data.c \
tui/tui-interp.c \
tui/tui-io.c \
tui/tui-layout.c \
+ tui/tui-main.c \
tui/tui-out.c \
tui/tui-regs.c \
tui/tui-source.c \
tui/tui-wingeneral.c \
tui/tui-winsource.c \
tui/tui.c
+
SUBDIR_TUI_DEPS =
SUBDIR_TUI_LDFLAGS=
SUBDIR_TUI_CFLAGS= \
# it doesn't work, then refer to libiberty.
# Libraries and corresponding dependencies for compiling gdb.
-# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
+# XM_CLIBS, defined in *config files, have host-dependent libs.
# LIBIBERTY appears twice on purpose.
-# If you have the Cygnus libraries installed,
-# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
-INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
- $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
- -lintl -liberty $(LIBGNU)
CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
$(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
$(LIBEXPAT) \
- $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBCOMMON)
+ $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
- $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU) \
- $(LIBCOMMON)
+ $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
record.c gcore.c \
jit.c \
xml-syscall.c \
+ annotate.c common/signals.c copying.c dfp.c gdb.c inf-child.c \
+ regset.c sol-thread.c windows-termcap.c
LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
c-lang.h d-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
-cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h \
+cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h cli/cli-utils.h \
cli/cli-script.h macrotab.h symtab.h version.h gnulib/wchar.in.h \
gnulib/string.in.h gnulib/str-two-way.h \
-gnulib/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver/win32-low.h \
-gdbserver/i387-fp.h gdbserver/server.h gdbserver/terminal.h \
-gdbserver/mem-break.h gdbserver/wincecompat.h gdbserver/target.h \
-gdbserver/linux-low.h gdbserver/gdb_proc_service.h \
-gdbserver/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
+gnulib/stdint.in.h remote.h gdb.h sparc-nat.h \
+gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h memrange.h \
mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
-gdb_usleep.h jit.h xml-syscall.h ada-operator.inc microblaze-tdep.h \
-psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h
+gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
+psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \
+amd64-darwin-tdep.h charset-list.h common/gdb_signals.h common/i386-xstate.h \
+config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \
+dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
+i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h \
+osdata.h procfs.h python/py-event.h python/py-events.h python/py-stopevent.h \
+python/python-internal.h python/python.h ravenscar-thread.h record.h \
+solib-darwin.h solib-ia64-hpux.h solib-spu.h windows-nat.h xcoffread.h \
+gnulib/extra/arg-nonnull.h gnulib/extra/c++defs.h gnulib/extra/warn-on-use.h \
+gnulib/stddef.in.h inline-frame.h
# Header files that already have srcdir in them, or which are in objdir.
memattr.o mem-break.o target.o parse.o language.o buildsym.o \
findcmd.o \
std-regs.o \
+ signals.o \
exec.o reverse.o \
bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
dbxread.o coffread.o coff-pe-read.o \
# This is used to force build failures in existing trees when
# a new directory is added.
# The format here is for the `case' shell command.
-REQUIRED_SUBDIRS = doc | testsuite | gnulib | data-directory | common
+REQUIRED_SUBDIRS = doc | testsuite | gnulib | data-directory
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.c \
@$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
.PHONY: all-lib
-#
-$(LIBCOMMON): $(LIBCOMMON_DIR)/Makefile
- @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=common subdir_do
-
-configure-common:
- @: $(MAKE); $(unstage)
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- test ! -f common/Makefile || exit 0; \
- $(SHELL) $(srcdir)/../mkinstalldirs common ; \
- $(HOST_EXPORTS) \
- echo Configuring in common; \
- cd "common" || exit 1; \
- commondir="$$s/common"; \
- srcdiroption="--srcdir=$${commondir}"; \
- $(SHELL) $${commondir}/configure --enable-gdbserver=no \
- $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
- --target=${target_alias} $${srcdiroption} \
- || exit 1
-
# Convenience rule to handle recursion.
.PHONY: all-data-directory
all-data-directory: data-directory/Makefile
clean mostlyclean: $(CONFIG_CLEAN)
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
- rm -f init.c version.c
+ rm -f init.c version.c observer.h observer.inc
rm -f gdb$(EXEEXT) core make.log
rm -f gdb[0-9]$(EXEEXT)
rm -f test-cp-name-parser$(EXEEXT)
CONFIG_LINKS= \
$(SHELL) config.status
-common/Makefile: configure-common common/Makefile.in config.status @frags@
- CONFIG_FILES="common/Makefile" \
- CONFIG_COMMANDS="depfiles" \
- CONFIG_HEADERS= \
- CONFIG_LINKS= \
- $(SHELL) config.status
-
config.h: stamp-h ; @true
stamp-h: $(srcdir)/config.in config.status
CONFIG_HEADERS=config.h:config.in \
ACLOCAL_AMFLAGS = -I gnulib/m4 -I ../config
aclocal_m4_deps = \
configure.ac \
+ gnulib/m4/00gnulib.m4 \
gnulib/m4/extensions.m4 \
gnulib/m4/gnulib-common.m4 \
gnulib/m4/gnulib-comp.m4 \
gnulib/m4/include_next.m4 \
gnulib/m4/longlong.m4 \
gnulib/m4/memchr.m4 \
- gnulib/m4/memcmp.m4 \
gnulib/m4/memmem.m4 \
- gnulib/m4/onceonly_2_57.m4 \
+ gnulib/m4/mmap-anon.m4 \
+ gnulib/m4/multiarch.m4 \
+ gnulib/m4/onceonly.m4 \
+ gnulib/m4/stddef_h.m4 \
gnulib/m4/stdint.m4 \
gnulib/m4/string_h.m4 \
- gnulib/m4/wchar.m4 \
+ gnulib/m4/warn-on-use.m4 \
+ gnulib/m4/wchar_h.m4 \
+ gnulib/m4/wchar_t.m4 \
+ gnulib/m4/wint_t.m4 \
../config/extensions.m4 \
../config/lead-dot.m4 \
../config/proginstall.m4 \
$(COMPILE) $(srcdir)/cli/cli-setshow.c
$(POSTCOMPILE)
+cli-utils.o: $(srcdir)/cli/cli-utils.c
+ $(COMPILE) $(srcdir)/cli/cli-utils.c
+ $(POSTCOMPILE)
+
#
# GDBTK sub-directory
$(COMPILE) $(srcdir)/mi/mi-common.c
$(POSTCOMPILE)
+# gdb/common/ dependencies
+#
+# Need to explicitly specify the compile rule as make will do nothing
+# or try to compile the object file into the sub-directory.
+
+signals.o: $(srcdir)/common/signals.c
+ $(COMPILE) $(srcdir)/common/signals.c
+ $(POSTCOMPILE)
+
#
# gdb/tui/ dependencies
#
projects / deliverable / binutils-gdb.git / blobdiff