-##Copyright (C) 1989-1991 Free Software Foundation, Inc.
+#Copyright (C) 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
# This file is part of GDB.
-# GDB is free software; you can redistribute it and/or modify
+# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 1, or (at your option)
-# any later version.
-
-# GDB is distributed in the hope that it will be useful,
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-
+#
# You should have received a copy of the GNU General Public License
-# along with GDB; see the file COPYING. If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+prefix = /usr/local
+
+program_prefix =
+exec_prefix = $(prefix)
+bindir = $(exec_prefix)/bin
+libdir = $(exec_prefix)/lib
+
+datadir = $(prefix)/lib
+mandir = $(prefix)/man
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = $(prefix)/info
+includedir = $(prefix)/include
+docdir = $(datadir)/doc
+
+SHELL = /bin/sh
+
+INSTALL = install -c
+INSTALL_PROGRAM = $(INSTALL)
+INSTALL_DATA = $(INSTALL)
+
+AR = ar
+AR_FLAGS = qv
+RANLIB = ranlib
-# Destination directory of the software tree build
-destdir = /usr/local
-
-# Place to install binaries in the destination tree.
-bindir=$(destdir)/bin
+# Flags that describe where you can find the termcap library.
+# This can be overridden in the host Makefile fragment file.
+TERMCAP = -ltermcap
# System V: If you compile gdb with a compiler which uses the coff
# encapsulation feature (this is a function of the compiler used, NOT
#CC=gcc -traditional
GCC=gcc
-VPATH=$(srcdir)
+# Directory containing source files. Don't clean up the spacing,
+# this exact string is matched for by the "configure" script.
+srcdir = .
# It is also possible that you will need to add -I/usr/include/sys to the
# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
# is where it should be according to Posix).
-YACC=bison -y
+BISON=bison -y
+BISONFLAGS=
+YACC=$(BISON) $(BISONFLAGS)
# YACC=yacc
-SHELL=/bin/sh
MAKE=make
-# We need either GNU m4 or SysV m4; Berkeley/Sun don't have quite enough.
-#M4=gm4
-M4=/usr/5bin/m4
+
+# Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
+# Berkeley/Sun don't have quite enough.
+#M4=/usr/5bin/m4
+M4=gm4
+
+# where to find texinfo; GDB dist should include a recent one
+TEXIDIR=${srcdir}/../texinfo/fsf
+
+# where to find makeinfo, preferably one designed for texinfo-2
+MAKEINFO=makeinfo
# Set this up with gcc if you have gnu ld and the loader will print out
# line numbers for undefinded refs.
#CC-LD=gcc -static
CC-LD=${CC}
-# define this to be "gmalloc.o" if you want to use the gnu malloc routine
-# (useful for debugging memory allocation problems in gdb). To use your
-# system malloc, uncomment the following two lines.
-#GNU_MALLOC =
-#MALLOC_CFLAGS = -DNO_MALLOC_CHECK
-GNU_MALLOC = gmalloc.o mcheck.o mtrace.o
-MALLOC_CFLAGS =
-
# Where is the "include" directory? Traditionally ../include or ./include
INCLUDE_DIR = ${srcdir}/../include
INCLUDE_DEP = $$(INCLUDE_DIR)
+# Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
+# or ./mmalloc (When we want the binary library built from it, we use
+# ${MMALLOC_DIR}${subdir}.)
+# Note that mmalloc can still be used on systems without mmap().
+# To use your system malloc, comment out the following defines.
+MMALLOC_DIR = ${srcdir}/../mmalloc
+MMALLOC_DEP = $$(MMALLOC_DIR)
+MMALLOC_LIB = ./../mmalloc${subdir}/libmmalloc.a
+# To use your system malloc, uncomment MMALLOC_DISABLE.
+#MMALLOC_DISABLE = -DNO_MMALLOC
+# To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
+#MMALLOC_CHECK = -DNO_MMALLOC_CHECK
+MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
+
# Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
BFD_DIR = ${srcdir}/../bfd
BFD_DEP = $$(BFD_DIR)
-BFD_LIB = $(BFD_DIR)${subdir}/libbfd.a
+BFD_LIB = ./../bfd${subdir}/libbfd.a
# Where is the source dir for the READLINE library? Traditionally in .. or .
# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
READLINE_DIR = ${srcdir}/../readline
READLINE_DEP = $$(READLINE_DIR)
-RL_LIB = $(READLINE_DIR)${subdir}/libreadline.a
+RL_LIB = ./../readline${subdir}/libreadline.a
# All the includes used for CFLAGS and for lint.
# -I. for config files.
# {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
# CFLAGS for GDB
-GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS}
+MINUS_G=-g
+GLOBAL_CFLAGS = ${MINUS_G} ${TM_CFLAGS} ${XM_CFLAGS}
#PROFILE_CFLAGS = -pg
-CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
+# CFLAGS is the aggregate of several individual *_CFLAGS macros.
+# USER_CFLAGS is specifically reserved for setting from the command line
+# when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
+CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
# None of the things in CFLAGS will do any harm, and on some systems
# (e.g. SunOS4) it is important to use the M_CFLAGS.
LDFLAGS = $(CFLAGS)
# Where is the "-liberty" library, containing getopt and obstack?
LIBIBERTY_DIR = ${srcdir}/../libiberty
-LIBIBERTY = ${LIBIBERTY_DIR}${subdir}/libiberty.a
+LIBIBERTY = ./../libiberty${subdir}/libiberty.a
-# Flags that describe where you can find the termcap library.
-# You may need to make other arrangements for USG.
-TERMCAP = -ltermcap
-
-# The xconfig file must define REGEX and REGEX1 on USG machines.
+# The config/mh-* file must define REGEX and REGEX1 on USG machines.
# If your sysyem is missing alloca(), or, more likely, it's there but
# it doesn't work, define ALLOCA & ALLOCA1 too.
# If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
# Libraries and corresponding dependencies for compiling gdb.
# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
-# TERMCAP comes last, since readline depends on it.
-CLIBS = $(XM_CLIBS) ${TM_CLIBS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB} ${TERMCAP}
-CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
+# TERMCAP comes after readline, since readline depends on it.
+CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${MMALLOC_LIB} ${LIBIBERTY} \
+ ${XM_CLIBS} ${TM_CLIBS}
+CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${MMALLOC_LIB} ${LIBIBERTY} \
+ ${RL_LIB} ${MMALLOC_LIB}
-ADD_FILES = ${REGEX} ${ALLOCA} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
-ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
+ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
+ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES}
-VERSION = 3.95
-DIST=gdb-$(VERSION)
+VERSION = 4.4.86
+DIST=gdb
LINT=/usr/5bin/lint
-LINTFLAGS=
+LINTFLAGS= -I${BFD_DIR}
+
+# Host and target-dependent makefile fragments come in here.
+####
+# End of host and target-dependent makefile fragments
# Source files in the main directory.
-# Files which are included via a tconfig/* or xconfig/* file
+# Files which are included via a config/* Makefile fragment
# should *not* be specified here; they're in "ALLDEPFILES".
SFILES_MAINDIR = \
blockframe.c breakpoint.c command.c core.c \
environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
- main.c printcmd.c \
+ main.c printcmd.c gdbtypes.c \
remote.c source.c stack.c symmisc.c symtab.c symfile.c \
- utils.c valarith.c valops.c valprint.c values.c expread.y \
+ utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
signame.c cplus-dem.c mem-break.c target.c inftarg.c \
- dbxread.c coffread.c \
- ieee-float.c
+ dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
+ ieee-float.c language.c parse.c buildsym.c objfiles.c \
+ minsyms.c mipsread.c
# Source files in subdirectories (which will be handled separately by
# 'make gdb.tar.Z').
-# Files which are included via a tconfig/* or xconfig/* file
+# Files which are included via a config/* Makefile fragment
# should *not* be specified here; they're in "ALLDEPFILES".
SFILES_SUBDIR = \
${srcdir}/vx-share/dbgRpcLib.h \
${srcdir}/vx-share/xdr_ptrace.h \
${srcdir}/vx-share/xdr_rdb.h \
${srcdir}/vx-share/xdr_regs.h \
- ${srcdir}/nindy-share/Makefile \
- ${srcdir}/nindy-share/VERSION \
${srcdir}/nindy-share/b.out.h \
${srcdir}/nindy-share/block_io.h \
${srcdir}/nindy-share/coff.h \
${srcdir}/nindy-share/stop.h \
${srcdir}/nindy-share/ttycntl.h
+# Non-source files in subdirs, that should go into gdb.tar.Z.
+NONSRC_SUBDIR = \
+ ${srcdir}/nindy-share/Makefile \
+ ${srcdir}/nindy-share/VERSION
+
# All source files that go into linking GDB, except config-specified files.
SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
# All source files that lint should look at
-LINTFILES = $(SFILES) expread.tab.c init.c
+LINTFILES = $(SFILES) $(YYFILES) init.c
# Any additional files specified on these lines should also be added to
# the OTHERS = definition below, so they go in the tar files.
SFILES_STAND = $(SFILES) standalone.c
SFILES_KGDB = $(SFILES) stuff.c kdb-start.c
-# Header files that are not named in tconfig/* or xconfig/* go here.
-HFILES= breakpoint.h command.h defs.h environ.h \
- expression.h frame.h gdbcmd.h gdbcore.h \
- getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
- signals.h signame.h symfile.h symtab.h \
- target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
- value.h
-
-# Header files for machine opcode tables.
-# when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
-# business, since they will be included in the separate includes tar file
-# rather than in the gdb tar file.
-OPCODE_DIR =
-OPCODES = $(OPCODE_DIR)pn-opcode.h $(OPCODE_DIR)np1-opcode.h \
- $(OPCODE_DIR)sparc-opcode.h $(OPCODE_DIR)vax-opcode.h \
- $(OPCODE_DIR)m68k-opcode.h $(OPCODE_DIR)ns32k-opcode.h \
- $(OPCODE_DIR)convx-opcode.h $(OPCODE_DIR)pyr-opcode.h \
- $(OPCODE_DIR)mips-opcode.h $(OPCODE_DIR)am29k-opcode.h \
- $(OPCODE_DIR)arm-opcode.h $(OPCODE_DIR)m88k-opcode.h \
- $(OPCODE_DIR)tahoe-opcode.h
+# Header files that are not named in config/* Makefile fragments go here.
+HFILES= breakpoint.h buildsym.h call-cmds.h command.h defs.h environ.h \
+ expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \
+ ieee-float.h inferior.h minimon.h objfiles.h partial-stab.h \
+ signals.h signame.h symfile.h symtab.h solib.h \
+ target.h terminal.h tm-68k.h tm-i960.h tm-sunos.h tm-sysv4.h \
+ xm-m68k.h xm-sysv4.h language.h parser-defs.h value.h
REMOTE_EXAMPLES = m68k-stub.c i386-stub.c rem-multi.shar
-MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \
- ansidecl.h stdlib.h gmalloc.h stddef.h
-
-POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC)
+POSSLIBS_MAINDIR = regex.c regex.h alloca.c
POSSLIBS = $(POSSLIBS_MAINDIR)
TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
-# tdesc-lib cannot be named simply tdesc, because if if it were GNU make
-# would try to make it from tdesc.c.
-# tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
-OTHERS = Makefile.dist depend alldeps.mak Makefile.sdir \
- createtags munch config.gdb config.status \
- ChangeLog ChangeLog-3.x \
- README TODO TAGS WHATS.NEW \
- .gdbinit COPYING expread.tab.c \
- copying.c Projects Convex.notes copying.awk \
+OTHERS = Makefile.in depend alldeps.mak createtags munch configure.in \
+ ChangeLog ChangeLog-9091 ChangeLog-3.x gdb.1 refcard.ps \
+ README TODO TAGS WHATS.NEW Projects \
+ .gdbinit COPYING $(YYFILES) \
+ copying.c Convex.notes copying.awk \
saber.suppress standalone.c stuff.c kdb-start.c \
- putenv.c \
- hp-include # tests
+ putenv.c
+
+# Subdirectories of gdb, which should be included in their entirety in
+# gdb-xxx.tar.Z:
+TARDIRS = doc # tests
+
+# GDB "info" files, which should be included in their entirety
+INFOFILES = gdb.info*
DEPFILES= ${TDEPFILES} ${XDEPFILES}
-SOURCES=$(SFILES) $(ALLDEPFILES)
-TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
+SOURCES=$(SFILES) $(ALLDEPFILES) $(YYFILES)
+TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS}
TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
- ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
+ ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
values.o eval.o valops.o valarith.o valprint.o printcmd.o \
symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
- command.o utils.o expread.o expprint.o environ.o version.o \
+ command.o utils.o expprint.o environ.o version.o gdbtypes.o \
copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
- inftarg.o ieee-float.o putenv.o \
- dbxread.o coffread.o # mipsread.o
+ inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
+ buildsym.o objfiles.o minsyms.o \
+ dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o
RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
NTSSTART = kdb-start.o
+SUBDIRS = doc
+
+# For now, shortcut the "configure GDB for fewer languages" stuff.
+YYFILES = c-exp.tab.c m2-exp.tab.c
+YYOBJ = c-exp.tab.o m2-exp.tab.o
+
# Prevent Sun make from putting in the machine type. Setting
# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
.c.o:
${CC} -c ${CFLAGS} $<
all: gdb
-
-install: gdb
- cp gdb $(bindir)/gdb.new
- mv $(bindir)/gdb.new $(bindir)/gdb
+ $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)"
+check:
+info: force
+ $(MAKE) subdir_do DO=info "DODIRS=$(SUBDIRS)" "MAKEINFO=$(MAKEINFO)"
+install-info: force
+ $(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)"
+clean-info: force
+ $(MAKE) subdir_do DO=clean-info "DODIRS=$(SUBDIRS)"
+
+gdb.z:gdb.1
+ nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
+ pack gdb.t ; rm -f gdb.t
+ mv gdb.t.z gdb.z
+
+install: gdb
+ $(INSTALL_PROGRAM) gdb $(bindir)/$(program_prefix)gdb
+ $(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$(program_prefix)gdb.1
$(M_INSTALL)
+ $(MAKE) subdir_do DO=install "DODIRS=$(SUBDIRS)"
-init.c: $(srcdir)/munch $(MUNCH_DEFINE) $(OBS) $(TSOBS)
+init.c: $(srcdir)/munch $(OBS) $(TSOBS)
$(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
- $(CLIBS)
+ $(CLIBS) $(LOADLIBES)
saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
#setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
#load ./init.c $(SFILES)
- #unload ${srcdir}/expread.y ${srcdir}/vx-share/*.h
+ #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
#unload ${srcdir}/nindy-share/[A-Z]*
- #load ${srcdir}/expread.tab.c
+ #load c-exp.tab.c m2-exp.tab.c
#load copying.c version.c
- #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
- #load ${LIBIBERTY_DIR}/*.c
- #load ${BFD_DIR}/*.c
- #load ${READLINE_DIR}/*.c
+ #load ../libiberty/libiberty.a
+ #load ../bfd/libbfd.a
+ #load ../readline/libreadline.a
+ #load ../mmalloc/libmmalloc.a
#load -ltermcap
- ##void mcheck(a) void (*a)(); { }
- ##void mtrace() { }
-
+ #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
+ echo "Load .c corresponding to:" $(DEPFILES)
# This is useful when debugging GDB, because some Unix's don't let you run GDB
# remote support.
rapp: $(RAPP_OBS)
rm -f rapp_init.c
- ${srcdir}/munch ${RAPP_OBS} > rapp_init.c
+ ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
# Support for building Makefile out of configured pieces, automatically
-# generated dependencies, etc.
-Makefiles= Makefile.sdir $(M_MAKEFILE) \
- ${srcdir}/alldeps.mak ${srcdir}/Makefile.dist
-
-MAKE_MAKEFILE= echo "M_MAKEFILE=$(M_MAKEFILE)" | \
- cat - ${Makefiles} ${srcdir}/depend > Makefile
+# generated dependencies, etc. alldeps.mak is a file that contains
+# "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
+# ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
+# contents of the config subdirectory.
-Makefile: $(Makefiles)
- $(MAKE_MAKEFILE)
-
-alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig
+alldeps.mak: ${srcdir}/config
rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
- for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
- ${srcdir}/xconfig/*[0-9A-Za-z] | grep -v RCS` ; do \
+ for i in `ls -d ${srcdir}/config/*.m[ht]` ; do \
echo $$i >>allconfig.tmp; \
awk <$$i ' \
$$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
-e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
-e 's/\.o/.c/' \
>alldeps2.tmp
+ echo '# Start of "alldeps.mak" definitions' \
+ >>alldeps.mak;
echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
>>alldeps.mak;
grep -v / alldeps2.tmp | \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
+ echo '# End of "alldeps.mak" definitions' \
+ >>alldeps.mak;
rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
# The sed script makes everything which depends on {x,t}m.h depend on
# config.status as well, in case someone reconfigures gdb out from
# under an already compiled gdb.
-depend: $(SOURCES) Makefile.dist
+depend: $(SOURCES) Makefile.in
@echo Ignore errors about non-existent system-supplied include files
@echo for systems other than the one you are using.
@echo "If xm.h and tm.h don't exist, the error messages saying so"
@echo Also ignore parse errors in valops.c, and any errors in
@echo arm-convert.s.
-$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
- `ls $(SOURCES) | grep -v \.h$$ |sort -u` >depend.tmp
- <depend.tmp sed -e 's/ [xt]m.h/& config.status/g' \
- -e 's; vx-share/; $${srcdir}/vx-share/;g' \
- -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
+ `ls $(SOURCES) | grep -v '\.[hy]$$' |sort -u` >depend.tmp
+# If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
+# for xm.h and tm.h. This allows the same "depend" file to be used
+# by the various subdirectories.
+ if [ "${srcdir}" = "." ] ; then \
+ <depend.tmp sed \
+ -e 's; ./xm.h; xm.h;g' \
+ -e 's; ./tm.h; tm.h;g' \
+ -e 's; \./; $${srcdir}/;g' \
+ -e 's; vx-share/; $${srcdir}/vx-share/;g' \
+ -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
+ >depend.tm2; \
+ rm depend.tmp; \
+ mv depend.tm2 depend.tmp; \
+ fi
+ <depend.tmp sed \
+ -e 's; [xt]m.h;& config.status;g' \
-e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
-e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
-e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
- -e 's; \./; $${srcdir}/;g' \
+ -e 's; ./xm.h; xm.h config.status;g' \
+ -e 's; ./tm.h; tm.h config.status;g' \
>depend
- $(MAKE_MAKEFILE)
rm depend.tmp
config.status:
# for some machines.
# But these rules don't do what we want; we want to hack the foo.o: tm.h
# dependency to do the right thing.
-tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h
-tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h
-xm-news1000.h : xm-news.h
-xm-i386-sv32.h : xm-i386.h
+tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-68k.h
+tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-68k.h
+xm-news1000.h: xm-news.h
+xm-i386-sv32.h: xm-i386.h
tm-i386gas.h: tm-i386.h
-xm-sun4os4.h : xm-sparc.h
-tm-sun4os4.h : tm-sparc.h
+xm-sun4os4.h: xm-sparc.h
+tm-sun4os4.h: tm-sparc.h
-kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
+kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
rm -f init.c
$(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
$(CC) $(LDFLAGS) -c init.c $(CLIBS)
$(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
tags: TAGS
-# FIXME: Get alldeps.mak up to date, config.gdb none, THEN make gdb.tar.Z!
-gdb.tar.Z: ${TARFILES}
- rm -f gdb.tar; rm -rf $(DIST)
- mkdir $(DIST)
- cd $(DIST) ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
- mkdir doc
- cd doc; for i in ../doc/*.tex* ../doc/*.m4; \
- do ln -s $$i . ; done
- mkdir $(DIST)/xconfig ${DIST}/tconfig
- cd $(DIST)/tconfig ; \
+# Making distributions of GDB and friends.
+
+# Make a directory `proto-gdb.dir' that contains an image of the GDB
+# directory of the distribution, built up with symlinks.
+make-proto-gdb.dir: force_update
+ $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
+ $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
+
+# Make a tar file containing the GDB directory of the distribution.
+gdb.tar.Z: force_update
+ $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
+ $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z
+
+# Set up the GDB directory for distribution, by building all files that
+# are products of other files.
+setup-to-dist: force_update
+ ../configure none
+ rm -f alldeps.mak
+ $(MAKE) $(MFLAGS) alldeps.mak
+ ../configure none
+ rm -f depend
+ $(MAKE) $(MFLAGS) depend
+ ../configure none
+ (cd doc; $(MAKE) $(MFLAGS) gdbVN.m4)
+ $(MAKE) $(MFLAGS) gdb.info
+ $(MAKE) $(MFLAGS) refcard.ps
+
+# Build a tar file from a proto-gdb.dir.
+gdb-$(VERSION).tar.Z: force_update
+ rm -f gdb.tar gdb-$(VERSION).tar.Z
+ $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
+ ln -s proto-gdb.dir $(DIST)
+ tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z
+ rm -rf $(DIST) proto-gdb.dir
+
+# Build a proto-gdb.dir after GDB has been set up for distribution.
+# This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
+# built in the setup-to-dist process, since it defines things like ALLCONFIG
+# and ALLDEPFILES, that we need.
+make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info
+ rm -rf proto-gdb.dir
+ mkdir proto-gdb.dir
+ cd proto-gdb.dir ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
+ cd proto-gdb.dir ; ln -s ../${INFOFILES} .
+ cd proto-gdb.dir ; for i in ${TARDIRS}; do \
+ (mkdir $$i; cd $$i; \
+ ln -s ../../$$i/* .; \
+ rm -rf SCCS CVS.adm RCS config.status); done
+ mkdir proto-gdb.dir/config
+ cd proto-gdb.dir/config ; \
for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
- mkdir $(DIST)/vx-share $(DIST)/nindy-share
- cd $(DIST)/tconfig ; \
- for i in $(SFILES_SUBDIR) $(ALLDEPFILES_SUBDIR); \
+ mkdir proto-gdb.dir/vx-share proto-gdb.dir/nindy-share
+ cd proto-gdb.dir/config ; \
+ for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \
do ln -s ../../$$i ../$$i ; done
- tar chf - $(DIST) | compress >gdb.tar.Z
- rm -rf $(DIST)
+ chmod og=u `find . -print`
clean:
- rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
- rm -f init.c init.o version.c
+ rm -f *.o ${ADD_FILES}
+ rm -f init.c version.c
rm -f gdb core gdb.tar gdb.tar.Z make.log
rm -f gdb[0-9]
- rm -f gdb.dvi gdb-all*
+ $(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS)"
-distclean: clean expread.tab.c TAGS
+distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
rm -f tm.h xm.h config.status
rm -f y.output yacc.acts yacc.tmp
- rm -f ${TESTS} Makefile
+ rm -f ${TESTS} Makefile depend
+ $(MAKE) subdir_do DO=distclean "DODIRS=$(SUBDIRS)"
realclean: clean
- rm -f expread.tab.c TAGS
+ rm -f c-exp.tab.c m2-exp.tab.c TAGS
rm -f tm.h xm.h config.status
- rm -f Makefile
+ rm -f Makefile depend
+ $(MAKE) subdir_do DO=realclean "DODIRS=$(SUBDIRS)"
+
+STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
+
+subdir_do: force
+ for i in $(DODIRS); do \
+ if [ -d ./$$i ] ; then \
+ if (cd ./$$i; \
+ $(MAKE) \
+ "against=$(against)" \
+ "AR=$(AR)" \
+ "AR_FLAGS=$(AR_FLAGS)" \
+ "CC=$(CC)" \
+ "RANLIB=$(RANLIB)" \
+ "MAKEINFO=$(MAKEINFO)" \
+ "BISON=$(BISON)" $(DO)) ; then true ; \
+ else exit 1 ; fi ; \
+ else true ; fi ; \
+ done
-gdb-all.texinfo: ${srcdir}/doc/gdb.texinfo
- ${M4} $(srcdir)/doc/pretex.m4 $(srcdir)/doc/none.m4 $(srcdir)/doc/all.m4 $(srcdir)/doc/gdb.texinfo >gdb-all.texinfo
+# Copy the object files from a particular stage into a subdirectory.
+stage1: force
+ -mkdir stage1
+ -mv -f $(STAGESTUFF) stage1
+ $(MAKE) subdir_do DO=stage1 "DODIRS=$(SUBDIRS)"
-gdb.dvi : gdb-all.texinfo ${READLINE_DIR}/inc-readline.texinfo \
- ${READLINE_DIR}/inc-history.texinfo
- tex gdb-all.texinfo
- texindex gdb-all.??
- tex gdb-all.texinfo
- mv gdb-all.dvi gdb.dvi
- rm -f gdb-all.?? gdb-all.???
+stage2: force
+ -mkdir stage2
+ -mv -f $(STAGESTUFF) stage2
+ $(MAKE) subdir_do DO=stage2 "DODIRS=$(SUBDIRS)"
-# This should work eventually, but we're using texinfo2, and many makeinfo's
-# can't cope with all the markup. In the meantime, we distribute the info
-# files as formatted by the elisp texinfo2 code.
-#gdb.info: gdb-all.texinfo
-# makeinfo gdb-all.texinfo
+stage3: force
+ -mkdir stage3
+ -mv -f $(STAGESTUFF) stage3
+ $(MAKE) subdir_do DO=stage3 "DODIRS=$(SUBDIRS)"
-# Make copying.c from COPYING
-copying.c : COPYING copying.awk
- awk -f copying.awk < COPYING > copying.c
+against=stage2
-version.c : Makefile.dist
- echo 'char *version = "$(VERSION)";' >version.c
+comparison: force
+ for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
+ $(MAKE) subdir_do DO=comparison "DODIRS=$(SUBDIRS)"
+
+de-stage1: force
+ -(cd stage1 ; mv -f * ..)
+ -rmdir stage1
+ $(MAKE) subdir_do DO=de-stage1 "DODIRS=$(SUBDIRS)"
+
+de-stage2: force
+ -(cd stage2 ; mv -f * ..)
+ -rmdir stage2
+ $(MAKE) subdir_do DO=de-stage2 "DODIRS=$(SUBDIRS)"
+
+de-stage3: force
+ -(cd stage3 ; mv -f * ..)
+ -rmdir stage3
+ $(MAKE) subdir_do DO=de-stage3 "DODIRS=$(SUBDIRS)"
+
+Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
+ $(SHELL) ./config.status
+
+force:
+
+# Documentation!
+# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
+refcard.dvi: $(srcdir)/doc/refcard.tex
+ ( cd ./doc; $(MAKE) refcard.dvi )
+ mv ./doc/refcard.dvi .
+
+# GDB QUICK REFERENCE (PostScript output, common PS fonts)
+refcard.ps: $(srcdir)/doc/refcard.tex
+ ( cd ./doc; $(MAKE) refcard.ps )
+ mv ./doc/refcard.ps .
+
+# GDB MANUAL: TeX dvi file
+gdb.dvi: ./doc/gdb-all.texi
+ ( cd ./doc; $(MAKE) M4=$(M4) gdb.dvi )
+ mv ./doc/gdb.dvi .
-${srcdir}/expread.tab.c : $(srcdir)/expread.y
- @echo 'Expect 4 shift/reduce conflict.'
- ${YACC} $(srcdir)/expread.y
- mv y.tab.c ${srcdir}/expread.tab.c
+# GDB MANUAL: info file
+gdb.info: ./doc/gdb-all.texi
+ ( cd ./doc; $(MAKE) M4=$(M4) gdb.info )
+ mv ./doc/gdb.info* .
-expread.o : ${srcdir}/expread.tab.c defs.h param.h symtab.h \
- frame.h expression.h
- $(CC) -c ${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
- mv expread.tab.o expread.o
+./doc/gdb-all.texi:
+ (cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb-all.texi)
-# dbxread, coffread, mipsread have dependencies on BFD header files.
+# Make copying.c from COPYING
+copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk
+ awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c
+
+version.c: Makefile.in
+ echo 'char *version = "$(VERSION)";' >version.c
+
+# c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
+# in srcdir, then compiled in target dir to c-exp.tab.o.
+c-exp.tab.o: c-exp.tab.c
+c-exp.tab.c: $(srcdir)/c-exp.y
+ @echo 'Expect 4 shift/reduce conflicts.'
+ ${YACC} $(srcdir)/c-exp.y
+ -mv y.tab.c c-exp.tab.c
+
+# m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
+# in srcdir, then compiled in target dir to m2-exp.tab.o.
+m2-exp.tab.o: m2-exp.tab.c
+m2-exp.tab.c: $(srcdir)/m2-exp.y
+ ${YACC} $(srcdir)/m2-exp.y
+ -mv y.tab.c m2-exp.tab.c
+
+# The symbol-file readers have dependencies on BFD header files.
dbxread.o: ${srcdir}/dbxread.c
${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
mipsread.o: ${srcdir}/mipsread.c
${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
+elfread.o: ${srcdir}/elfread.c
+ ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c
+
+dwarfread.o: ${srcdir}/dwarfread.c
+ ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dwarfread.c
+
+xcoffread.o: ${srcdir}/xcoffread.c
+ ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c
+
+xcoffexec.o: ${srcdir}/xcoffexec.c
+ ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c
+
# Drag in the files that are in another directory.
xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
-tdesc-lib/libdc.o : force_update
- cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
-
lint: $(LINTFILES)
- $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES)
+ $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
+ `echo ${DEPFILES} | sed 's/\.o /\.c /g'
gdb.cxref: $(SFILES)
cxref -I. $(SFILES) >gdb.cxref
-force_update :
+force_update:
# When used with GDB, the demangler should never look for leading
# underscores because GDB strips them off during symbol read-in. Thus
# -Dnounderscore.
-cplus-dem.o : cplus-dem.c
+cplus-dem.o: cplus-dem.c
${CC} -c ${CFLAGS} -Dnounderscore \
`echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`
+
+# GNU Make has an annoying habit of putting *all* the Makefile variables
+# into the environment, unless you include this target as a circumvention.
+# Rumor is that this will be fixed (and this target can be removed)
+# in GNU Make 4.0.
+.NOEXPORT:
+
+# This is the end of "Makefile.in". When built into "Makefile"
+# by the configure script, two things are added below this point:
+# alldeps.mak -- defintions of all files that are used in
+# host- or target-dependent configurations
+# depend -- what .o files depend on what .c and .h files,
+# for all configurations.
+
+
projects / deliverable / binutils-gdb.git / blobdiff