-#Copyright (C) 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
+#Copyright 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
# This file is part of GDB.
# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
# is where it should be according to Posix).
+# If you use bison instead of yacc, it needs to include the "-y" argument.
+#BISON="bison -y"
BISON=yacc
YACC=$(BISON)
-# Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
-# Berkeley/Sun don't have quite enough.
-#M4=/usr/5bin/m4
-M4=gm4
-
# where to find texinfo; GDB dist should include a recent one
-TEXIDIR=${srcdir}/../texinfo/fsf
+TEXIDIR=${srcdir}/../texinfo
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
-VERSION = 4.6.8
+VERSION = 4.8.1
DIST=gdb
LINT=/usr/5bin/lint
LINTFLAGS= -I${BFD_DIR}
+DGFLAGS=
+
# Host and target-dependent makefile fragments come in here.
####
# End of host and target-dependent makefile fragments
FLAGS_TO_PASS = \
+ "prefix=$(prefix)" \
+ "exec_prefix=$(exec_prefix)" \
"against=$(against)" \
"AR=$(AR)" \
"AR_FLAGS=$(AR_FLAGS)" \
remote.c source.c stack.c symmisc.c symtab.c symfile.c \
utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
mem-break.c target.c \
- dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
+ dbxread.c coffread.c elfread.c dwarfread.c stabsread.c \
ieee-float.c language.c parse.c buildsym.c objfiles.c \
- minsyms.c mipsread.c maint.c
+ minsyms.c mipsread.c maint.c ch-exp.y c-lang.c ch-lang.c m2-lang.c \
+ complaints.c typeprint.c c-typeprint.c ch-typeprint.c m2-typeprint.c \
+ c-valprint.c cp-valprint.c ch-valprint.c m2-valprint.c
# Source files in subdirectories (which will be handled separately by
# 'make gdb.tar.Z').
SFILES_SUBDIR = \
${srcdir}/vx-share/dbgRpcLib.h \
${srcdir}/vx-share/ptrace.h \
- ${srcdir}/vx-share/reg.h \
${srcdir}/vx-share/vxTypes.h \
${srcdir}/vx-share/vxWorks.h \
${srcdir}/vx-share/wait.h \
${srcdir}/vx-share/xdr_ld.h \
${srcdir}/vx-share/xdr_ptrace.h \
${srcdir}/vx-share/xdr_rdb.h \
- ${srcdir}/vx-share/xdr_regs.h \
${srcdir}/nindy-share/b.out.h \
${srcdir}/nindy-share/block_io.h \
${srcdir}/nindy-share/coff.h \
${srcdir}/nindy-share/demux.h \
${srcdir}/nindy-share/env.h \
${srcdir}/nindy-share/stop.h \
- ${srcdir}/nindy-share/ttycntl.h
+ ${srcdir}/nindy-share/ttycntl.h \
+ ${srcdir}/29k-share/udi_soc
+
+# Source files in sub-subdirectories. We need to know this because we
+# make relative symlinks with them.
+SFILES_SUBSUBDIR = \
+ ${srcdir}/29k-share/udi/udiphcfg.h \
+ ${srcdir}/29k-share/udi/udiphsun.h \
+ ${srcdir}/29k-share/udi/udiproc.h \
+ ${srcdir}/29k-share/udi/udipt29k.h \
+ ${srcdir}/29k-share/udi/udiptcfg.h \
+ ${srcdir}/29k-share/udi/udisoc.h
# Non-source files in subdirs, that should go into gdb.tar.Z.
NONSRC_SUBDIR = \
${srcdir}/vx-share/README
# All source files that go into linking GDB, except config-specified files.
-SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
+SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR) $(SFILES_SUBSUBDIR)
# All source files that lint should look at
LINTFILES = $(SFILES) $(YYFILES) init.c
gdb-stabs.h ieee-float.h inferior.h language.h \
minimon.h objfiles.h parser-defs.h partial-stab.h \
serial.h signals.h solib.h symfile.h symtab.h stabsread.h \
- target.h terminal.h xcoffsolib.h value.h \
+ target.h terminal.h typeprint.h xcoffsolib.h value.h \
tm-68k.h tm-hppa.h tm-i960.h tm-sparc.h tm-sunos.h tm-sysv4.h \
xm-m68k.h xm-sparc.h xm-sysv4.h xm-vax.h \
- nm-irix3.h nm-irix4.h nm-mips.h nm-rs6000.h nm-sun2.h nm-sun3.h \
- nm-sun4os4.h nm-trash.h nm-news.h nm-ultra3.h nm-m88k.h \
- nm-i386mach.h
+ nm-trash.h \
+ c-lang.h ch-lang.h m2-lang.h complaints.h \
+ ns32k-opcode.h \
+ valprint.h
REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
# Subdirectories of gdb, which should be included in their entirety in
# gdb-xxx.tar.Z:
-TARDIRS = doc # tests
+TARDIRS = doc sparclite # tests
# GDB "info" files, which should be included in their entirety
INFOFILES = gdb.info*
copying.o $(DEPFILES) mem-break.o target.o \
ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
buildsym.o objfiles.o minsyms.o maint.o demangle.o \
- dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
- stabsread.o core.o
+ dbxread.o coffread.o elfread.o dwarfread.o mipsread.o \
+ stabsread.o core.o c-lang.o ch-lang.o m2-lang.o complaints.o \
+ typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
+ c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o
RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
SUBDIRS = doc
# For now, shortcut the "configure GDB for fewer languages" stuff.
-YYFILES = c-exp.tab.c m2-exp.tab.c
-YYOBJ = c-exp.tab.o m2-exp.tab.o
+YYFILES = c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
+YYOBJ = c-exp.tab.o m2-exp.tab.o ch-exp.tab.o
# Prevent Sun make from putting in the machine type. Setting
# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
${CC} -c ${INTERNAL_CFLAGS} $<
all: gdb
- $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
+ $(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=$(SUBDIRS)" subdir_do
check:
+ ../dejagnu/runtest -to gdb $(DGFLAGS)
+
info: force
- $(MAKE) subdir_do DO=info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
+ $(MAKE) $(FLAGS_TO_PASS) DO=info "DODIRS=$(SUBDIRS)" subdir_do
install-info: force
- $(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
+ $(MAKE) $(FLAGS_TO_PASS) DO=install-info "DODIRS=$(SUBDIRS)" subdir_do
clean-info: force
- $(MAKE) subdir_do DO=clean-info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
+ $(MAKE) $(FLAGS_TO_PASS) DO=clean-info "DODIRS=$(SUBDIRS)" subdir_do
gdb.z:gdb.1
nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
$(INSTALL_PROGRAM) gdb $(bindir)/$$n; \
$(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$n.1
$(M_INSTALL)
- $(MAKE) subdir_do DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
+ $(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
init.c: $(srcdir)/munch $(OBS) $(TSOBS)
$(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
#setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
#load ./init.c $(SFILES)
- #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
+ #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/ch-exp.y
+ #unload ${srcdir}/vx-share/*.h
#unload ${srcdir}/nindy-share/[A-Z]*
- #load c-exp.tab.c m2-exp.tab.c
+ #load c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
#load copying.c version.c
#load ../opcodes/libopcodes.a
#load ../libiberty/libiberty.a
# Support for building Makefile out of configured pieces, automatically
# generated dependencies, etc. alldeps.mak is a file that contains
# "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
-# ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
-# contents of the config subdirectory.
+# ALLDEPFILES_SUBDIR, ALLDEPFILES_SUBSUBDIR, ALLPARAM, and ALLCONFIG,
+# all cadged from the current contents of the config subdirectory.
alldeps.mak: ${srcdir}/config
rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
for (i = 2; i <= NF; i++) \
print $$i >> "alldeps.tmp" ; \
} \
- $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE" { \
+ $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE=" { \
print $$2 >> "allparam.tmp" }' ; \
done
sort <alldeps.tmp | uniq | \
-e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
-e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
-e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
- -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
+ -e 's!udr.o!29k-share/udi/udr.c!' \
+ -e 's!udip2soc.o!29k-share/udi/udip2soc.c!' \
-e 's/\.o/.c/' \
>alldeps2.tmp
echo '# Start of "alldeps.mak" definitions' \
>>alldeps.mak;
- echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
+ echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR) $$(ALLDEP_FILES_SUBSUBDIR)' \
>>alldeps.mak;
grep -v / alldeps2.tmp | \
awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
- grep / alldeps2.tmp | \
+ grep / alldeps2.tmp | grep -v '/.*/' | \
awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
+ grep '/.*/' alldeps2.tmp | \
+ awk 'BEGIN {printf "ALLDEPFILES_SUBSUBDIR="} \
+ NR == 0 {printf $$0;} \
+ NR != 0 {printf "\\\n" $$0} \
+ END {printf "\n\n"}' >>alldeps.mak;
sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
@echo for systems other than the one you are using.
@echo Also ignore parse errors in valops.c, and any errors in
@echo arm-convert.s.
- touch xm.h tm.h
+ touch xm.h tm.h nm.h
-$(GCC) -MM -nostdinc -I/usr/include $(CFLAGS) -I$(BFD_DIR) \
-I${READLINE_DIR} $(INCLUDE_CFLAGS) \
`ls $(SOURCES) | grep -v '\.[hy]$$' | \
sort -u` >depend.tmp
# If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
-# for xm.h and tm.h. This allows the same "depend" file to be used
+# for xm.h, tm.h and nm.h. This allows the same "depend" file to be used
# by the various subdirectories.
if [ "${srcdir}" = "." ] ; then \
<depend.tmp sed \
-e 's; ./xm.h; xm.h;g' \
-e 's; ./tm.h; tm.h;g' \
+ -e 's; ./nm.h; nm.h;g' \
-e 's; \./; $${srcdir}/;g' \
-e 's; vx-share/; $${srcdir}/vx-share/;g' \
-e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
+ -e 's; 29k-share/; $${srcdir}/29k-share/;g' \
>depend.tm2; \
rm depend.tmp; \
mv depend.tm2 depend.tmp; \
-e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
-e 's; ./xm.h; xm.h config.status;g' \
-e 's; ./tm.h; tm.h config.status;g' \
+ -e 's; ./nm.h; nm.h config.status;g' \
>depend
rm depend.tmp
# are products of other files.
setup-to-dist: update-depend force_update
../configure none
- (cd doc; $(MAKE) $(MFLAGS) gdbVN.m4)
+ (cd doc; $(MAKE) $(MFLAGS) GDBvn.texi)
$(MAKE) $(MFLAGS) gdb.info
$(MAKE) $(MFLAGS) refcard.ps
cd proto-gdb.dir ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
cd proto-gdb.dir ; ln -s ../${INFOFILES} .
cd proto-gdb.dir ; for i in ${TARDIRS}; do \
- mkdir $$i; cd $$i; \
+ (mkdir $$i; cd $$i; \
ln -s ../../$$i/* .; \
rm -rf SCCS CVS.adm RCS config.status; \
- if test -f Makefile.in; then rm Makefile; else true; fi; done
+ if test -f Makefile.in; then rm Makefile; else true; fi;); done
mkdir proto-gdb.dir/config
cd proto-gdb.dir/config ; \
for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
mkdir proto-gdb.dir/vx-share proto-gdb.dir/nindy-share
+ mkdir proto-gdb.dir/29k-share proto-gdb.dir/29k-share/udi
cd proto-gdb.dir/config ; \
for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \
do ln -s ../../$$i ../$$i ; done
+ cd proto-gdb.dir/config ; \
+ for i in $(SFILES_SUBSUBDIR) $(ALLDEPFILES_SUBSUBDIR); \
+ do ln -s ../../../$$i ../$$i ; done
chmod og=u `find . -print`
clean:
rm -f init.c version.c
rm -f gdb core gdb.tar gdb.tar.Z make.log
rm -f gdb[0-9]
- @$(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
+ @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do
-distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
+distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
rm -f tm.h xm.h config.status
rm -f y.output yacc.acts yacc.tmp
rm -f ${TESTS} Makefile depend
- @$(MAKE) subdir_do DO=distclean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
+ @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do
realclean: clean
- rm -f c-exp.tab.c m2-exp.tab.c TAGS
+ rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
rm -f tm.h xm.h config.status
rm -f Makefile depend
- @$(MAKE) subdir_do DO=realclean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
+ @$(MAKE) $(FLAGS_TO_PASS) DO=realclean "DODIRS=$(SUBDIRS)" subdir_do
STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
# Documentation!
# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
-refcard.dvi: $(srcdir)/doc/refcard.tex
+refcard.dvi:
( cd ./doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS) )
mv ./doc/refcard.dvi .
# GDB QUICK REFERENCE (PostScript output, common PS fonts)
-refcard.ps: $(srcdir)/doc/refcard.tex
+refcard.ps:
( cd ./doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS) )
mv ./doc/refcard.ps .
# GDB MANUAL: TeX dvi file
-gdb.dvi: ./doc/gdb-all.texi
- ( cd ./doc; $(MAKE) M4=$(M4) gdb.dvi $(FLAGS_TO_PASS) )
+gdb.dvi:
+ ( cd ./doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS) )
mv ./doc/gdb.dvi .
# GDB MANUAL: info file
-gdb.info: ./doc/gdb-all.texi
- ( cd ./doc; $(MAKE) M4=$(M4) gdb.info $(FLAGS_TO_PASS) )
+gdb.info:
+ ( cd ./doc; $(MAKE) gdb.info $(FLAGS_TO_PASS) )
mv ./doc/gdb.info* .
-./doc/gdb-all.texi:
- (cd ./doc; $(MAKE) M4=$(M4) gdb-all.texi $(FLAGS_TO_PASS) )
-
# Make copying.c from COPYING
copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk
awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c
# c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
# in srcdir, then compiled in target dir to c-exp.tab.o.
+# ././c-exp.tab.c is so the command argument will never match $(srcdir)/c-exp.y
+# (some "makes" rewrite the VPATH into command arguments if they match deps).
# Remove bogus decls for malloc/realloc/free which conflict with everything
# else.
c-exp.tab.o: c-exp.tab.c
-c-exp.tab.c: $(srcdir)/c-exp.y
+c-exp.tab.c: $(srcdir)/c-exp.y $(srcdir)/Makefile.in
@echo 'Expect 4 shift/reduce conflicts.'
${YACC} $(srcdir)/c-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
- < y.tab.c > c-exp.tab.c
+ -e '/include.*malloc.h/d' \
+ -e 's/malloc/xmalloc/g' \
+ -e 's/realloc/xrealloc/g' \
+ < y.tab.c > ././c-exp.tab.c
-rm y.tab.c
+# start-sanitize-chill
+# ch-exp.tab.c is generated in target dir from ch-exp.y if it doesn't exist
+# in srcdir, then compiled in target dir to ch-exp.tab.o.
+# Remove bogus decls for malloc/realloc/free which conflict with everything
+# else.
+ch-exp.tab.o: ch-exp.tab.c
+ch-exp.tab.c: $(srcdir)/ch-exp.y $(srcdir)/Makefile.in
+ @echo 'Expect rules never reduced and {shift,reduce}/reduce conflicts.'
+ ${YACC} $(srcdir)/ch-exp.y
+ -sed -e '/extern.*malloc/d' \
+ -e '/extern.*realloc/d' \
+ -e '/extern.*free/d' \
+ -e '/include.*malloc.h/d' \
+ -e 's/malloc/xmalloc/g' \
+ -e 's/realloc/xrealloc/g' \
+ < y.tab.c > ././ch-exp.tab.c
+ -rm y.tab.c
+# end-sanitize-chill
+
# m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
# in srcdir, then compiled in target dir to m2-exp.tab.o.
+# Remove bogus decls for malloc/realloc/free which conflict with everything
+# else.
m2-exp.tab.o: m2-exp.tab.c
-m2-exp.tab.c: $(srcdir)/m2-exp.y
+m2-exp.tab.c: $(srcdir)/m2-exp.y $(srcdir)/Makefile.in
${YACC} $(srcdir)/m2-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
- < y.tab.c > m2-exp.tab.c
+ -e '/include.*malloc.h/d' \
+ -e 's/malloc/xmalloc/g' \
+ -e 's/realloc/xrealloc/g' \
+ < y.tab.c > ././m2-exp.tab.c
-rm y.tab.c
stabsread.o: ${srcdir}/stabsread.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/stabsread.c
+# Used on RS/6000 native
xcoffread.o: ${srcdir}/xcoffread.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c
xcoffexec.o: ${srcdir}/xcoffexec.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c
+# Used on HP-PA native
+paread.o: ${srcdir}/paread.c
+ ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/paread.c
+
# Drag in the files that are in another directory.
xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
-xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_regs.c
-
nindy.o: ${srcdir}/nindy-share/nindy.c
${CC} -c ${INTERNAL_CFLAGS} -DSTRIP='"$(tooldir)/bin/strip"' \
${srcdir}/nindy-share/nindy.c
ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c
+udr.o: ${srcdir}/29k-share/udi/udr.c
+ ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udr.c
+
+udip2soc.o: ${srcdir}/29k-share/udi/udip2soc.c
+ ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udip2soc.c
+
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
`echo ${DEPFILES} | sed 's/\.o /\.c /g'