-#Copyright (C) 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
-
-# This file is part of GDB.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-prefix = /usr/local
-
-program_prefix =
-exec_prefix = $(prefix)
-bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
-
-datadir = $(prefix)/lib
-mandir = $(prefix)/man
-man1dir = $(mandir)/man1
-man2dir = $(mandir)/man2
-man3dir = $(mandir)/man3
-man4dir = $(mandir)/man4
-man5dir = $(mandir)/man5
-man6dir = $(mandir)/man6
-man7dir = $(mandir)/man7
-man8dir = $(mandir)/man8
-man9dir = $(mandir)/man9
-infodir = $(prefix)/info
-includedir = $(prefix)/include
-docdir = $(datadir)/doc
-
-SHELL = /bin/sh
-
-INSTALL = install -c
-INSTALL_PROGRAM = $(INSTALL)
-INSTALL_DATA = $(INSTALL)
-
-AR = ar
-AR_FLAGS = qv
-RANLIB = ranlib
-
-# Flags that describe where you can find the termcap library.
-# This can be overridden in the host Makefile fragment file.
-TERMCAP = -ltermcap
-
-# System V: If you compile gdb with a compiler which uses the coff
-# encapsulation feature (this is a function of the compiler used, NOT
-# of the m-?.h file selected by config.gdb), you must make sure that
-# the GNU nm is the one that is used by munch.
-
-# If you are compiling with GCC, make sure that either 1) You use the
-# -traditional flag, or 2) You have the fixed include files where GCC
-# can reach them. Otherwise the ioctl calls in inflow.c
-# will be incorrectly compiled. The "fixincludes" script in the gcc
-# distribution will fix your include files up.
-#CC=cc
-#CC=gcc -traditional
-GCC=gcc
-
-# Directory containing source files. Don't clean up the spacing,
-# this exact string is matched for by the "configure" script.
-srcdir = .
-
-# It is also possible that you will need to add -I/usr/include/sys to the
-# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
-# is where it should be according to Posix).
-
-BISON=yacc
-YACC=$(BISON)
-MAKE=make
-
-# Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
-# Berkeley/Sun don't have quite enough.
-#M4=/usr/5bin/m4
-M4=gm4
-
-# where to find texinfo; GDB dist should include a recent one
-TEXIDIR=${srcdir}/../texinfo/fsf
-
-# where to find makeinfo, preferably one designed for texinfo-2
-MAKEINFO=makeinfo
-
-# Set this up with gcc if you have gnu ld and the loader will print out
-# line numbers for undefinded refs.
-#CC-LD=gcc -static
-CC-LD=${CC}
-
-# Where is the "include" directory? Traditionally ../include or ./include
-INCLUDE_DIR = ${srcdir}/../include
-INCLUDE_DEP = $$(INCLUDE_DIR)
-
-# Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
-# or ./mmalloc (When we want the binary library built from it, we use
-# ${MMALLOC_DIR}${subdir}.)
-# Note that mmalloc can still be used on systems without mmap().
-# To use your system malloc, comment out the following defines.
-MMALLOC_DIR = ${srcdir}/../mmalloc
-MMALLOC_DEP = $$(MMALLOC_DIR)
-MMALLOC_LIB = ./../mmalloc${subdir}/libmmalloc.a
-# To use your system malloc, uncomment MMALLOC_DISABLE.
-#MMALLOC_DISABLE = -DNO_MMALLOC
-# To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
-#MMALLOC_CHECK = -DNO_MMALLOC_CHECK
-MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
-
-# Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
-# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
-BFD_DIR = ${srcdir}/../bfd
-BFD_DEP = $$(BFD_DIR)
-BFD_LIB = ./../bfd${subdir}/libbfd.a
-
-# Where is the source dir for the READLINE library? Traditionally in .. or .
-# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
-READLINE_DIR = ${srcdir}/../readline
-READLINE_DEP = $$(READLINE_DIR)
-RL_LIB = ./../readline${subdir}/libreadline.a
-
-# All the includes used for CFLAGS and for lint.
-# -I. for config files.
-# -I${srcdir} possibly for regex.h also.
-INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I$(READLINE_DIR)
-
-# M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
-# from the config/ directory.
-GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS}
-#PROFILE_CFLAGS = -pg
-
-# CFLAGS is specifically reserved for setting from the command line
-# when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
-CFLAGS = -g
-# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
-INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
-# None of the things in CFLAGS will do any harm, and on some systems
-# (e.g. SunOS4) it is important to use the M_CFLAGS.
-LDFLAGS = $(CFLAGS)
-
-# Where is the "-liberty" library, containing getopt and obstack?
-LIBIBERTY_DIR = ${srcdir}/../libiberty
-LIBIBERTY = ./../libiberty${subdir}/libiberty.a
-
-# The config/mh-* file must define REGEX and REGEX1 on USG machines.
-# If your sysyem is missing alloca(), or, more likely, it's there but
-# it doesn't work, define ALLOCA & ALLOCA1 too.
-# If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
-
-# Libraries and corresponding dependencies for compiling gdb.
-# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
-# TERMCAP comes after readline, since readline depends on it.
-CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${MMALLOC_LIB} ${LIBIBERTY} \
- ${XM_CLIBS} ${TM_CLIBS}
-CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${MMALLOC_LIB} ${LIBIBERTY} \
- ${RL_LIB} ${MMALLOC_LIB}
-
-ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
-ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES}
-
-VERSION = 4.5.5
-DIST=gdb
-
-LINT=/usr/5bin/lint
-LINTFLAGS= -I${BFD_DIR}
-
-# Select demangler to use.
-DEMANGLER=cplus-dem
-
-# Select options to use when compiling ${DEMANGLER}.c. The default is no
-# options, which is correct for most targets, and also defaults to g++ style
-# demangling. For other demangling styles, such as the Annotated C++
-# Reference Manual (section 7.2.1c) style, set this define in the target-
-# dependent makefile fragment.
-DEMANGLE_OPTS=
-
-# Host and target-dependent makefile fragments come in here.
-####
-# End of host and target-dependent makefile fragments
-
-# Source files in the main directory.
-# Files which are included via a config/* Makefile fragment
-# should *not* be specified here; they're in "ALLDEPFILES".
-SFILES_MAINDIR = \
- blockframe.c breakpoint.c command.c core.c \
- environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
- main.c printcmd.c gdbtypes.c \
- remote.c source.c stack.c symmisc.c symtab.c symfile.c \
- utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
- ${DEMANGLER}.c mem-break.c target.c inftarg.c \
- dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
- ieee-float.c language.c parse.c buildsym.c objfiles.c \
- minsyms.c mipsread.c
-
-# Source files in subdirectories (which will be handled separately by
-# 'make gdb.tar.Z').
-# Files which are included via a config/* Makefile fragment
-# should *not* be specified here; they're in "ALLDEPFILES".
-SFILES_SUBDIR = \
- ${srcdir}/vx-share/dbgRpcLib.h \
- ${srcdir}/vx-share/ptrace.h \
- ${srcdir}/vx-share/reg.h \
- ${srcdir}/vx-share/vxTypes.h \
- ${srcdir}/vx-share/vxWorks.h \
- ${srcdir}/vx-share/wait.h \
- ${srcdir}/vx-share/xdr_ld.h \
- ${srcdir}/vx-share/xdr_ptrace.h \
- ${srcdir}/vx-share/xdr_rdb.h \
- ${srcdir}/vx-share/xdr_regs.h \
- ${srcdir}/nindy-share/b.out.h \
- ${srcdir}/nindy-share/block_io.h \
- ${srcdir}/nindy-share/coff.h \
- ${srcdir}/nindy-share/demux.h \
- ${srcdir}/nindy-share/env.h \
- ${srcdir}/nindy-share/stop.h \
- ${srcdir}/nindy-share/ttycntl.h \
- ${srcdir}/29k-share/include/coff.h \
- ${srcdir}/29k-share/include/error.h \
- ${srcdir}/29k-share/include/macros.h \
- ${srcdir}/29k-share/include/main.h \
- ${srcdir}/29k-share/include/memspcs.h \
- ${srcdir}/29k-share/include/miniint.h \
- ${srcdir}/29k-share/udi/udiphcfg.h \
- ${srcdir}/29k-share/udi/udiphsun.h \
- ${srcdir}/29k-share/udi/udiproc.h \
- ${srcdir}/29k-share/udi/udipt29k.h \
- ${srcdir}/29k-share/udi/udiptcfg.h \
- ${srcdir}/29k-share/udi/udisoc.h
-
-# Non-source files in subdirs, that should go into gdb.tar.Z.
-NONSRC_SUBDIR = \
- ${srcdir}/nindy-share/Makefile \
- ${srcdir}/nindy-share/VERSION
-
-# All source files that go into linking GDB, except config-specified files.
-SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
-
-# All source files that lint should look at
-LINTFILES = $(SFILES) $(YYFILES) init.c
-
-# Any additional files specified on these lines should also be added to
-# the OTHERS = definition below, so they go in the tar files.
-SFILES_STAND = $(SFILES) standalone.c
-SFILES_KGDB = $(SFILES) stuff.c kdb-start.c
-
-# Header files that are not named in config/* Makefile fragments go here.
-HFILES= breakpoint.h buildsym.h call-cmds.h command.h defs.h environ.h \
- expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \
- ieee-float.h inferior.h minimon.h objfiles.h partial-stab.h \
- signals.h symfile.h symtab.h solib.h xcoffsolib.h \
- target.h terminal.h tm-68k.h tm-i960.h tm-sunos.h tm-sysv4.h \
- xm-m68k.h xm-sysv4.h language.h parser-defs.h value.h xm-vax.h
-
-REMOTE_EXAMPLES = m68k-stub.c i386-stub.c rem-multi.shar
-
-POSSLIBS_MAINDIR = regex.c regex.h alloca.c
-POSSLIBS = $(POSSLIBS_MAINDIR)
-
-TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
-
-OTHERS = Makefile.in depend alldeps.mak createtags munch configure.in \
- ChangeLog ChangeLog-9091 ChangeLog-3.x gdb.1 refcard.ps \
- README TODO TAGS WHATS.NEW Projects \
- .gdbinit COPYING $(YYFILES) \
- copying.c Convex.notes copying.awk \
- saber.suppress standalone.c stuff.c kdb-start.c \
- putenv.c
-
-# Subdirectories of gdb, which should be included in their entirety in
-# gdb-xxx.tar.Z:
-TARDIRS = doc # tests
-
-# GDB "info" files, which should be included in their entirety
-INFOFILES = gdb.info*
-
-DEPFILES= ${TDEPFILES} ${XDEPFILES}
-
-SOURCES=$(SFILES) $(ALLDEPFILES) $(YYFILES)
-TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS}
-TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
- ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
-TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
-
-OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
- values.o eval.o valops.o valarith.o valprint.o printcmd.o \
- symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
- command.o utils.o expprint.o environ.o version.o gdbtypes.o \
- copying.o $(DEPFILES) ${DEMANGLER}.o mem-break.o target.o \
- inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
- buildsym.o objfiles.o minsyms.o \
- dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o
-
-RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
-
-TSOBS = core.o inflow.o
-
-NTSOBS = standalone.o
-
-TSSTART = /lib/crt0.o
-
-NTSSTART = kdb-start.o
-
-SUBDIRS = doc
-
-# For now, shortcut the "configure GDB for fewer languages" stuff.
-YYFILES = c-exp.tab.c m2-exp.tab.c
-YYOBJ = c-exp.tab.o m2-exp.tab.o
-
-# Prevent Sun make from putting in the machine type. Setting
-# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
-.c.o:
- ${CC} -c ${INTERNAL_CFLAGS} $<
-
-all: gdb
- $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)"
-check:
-info: force
- $(MAKE) subdir_do DO=info "DODIRS=$(SUBDIRS)" "MAKEINFO=$(MAKEINFO)"
-install-info: force
- $(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)"
-clean-info: force
- $(MAKE) subdir_do DO=clean-info "DODIRS=$(SUBDIRS)"
-
-gdb.z:gdb.1
- nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
- pack gdb.t ; rm -f gdb.t
- mv gdb.t.z gdb.z
-
-install: gdb
- $(INSTALL_PROGRAM) gdb $(bindir)/$(program_prefix)gdb
- $(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$(program_prefix)gdb.1
- $(M_INSTALL)
- $(MAKE) subdir_do DO=install "DODIRS=$(SUBDIRS)"
-
-init.c: $(srcdir)/munch $(OBS) $(TSOBS)
- $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
-
-gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
- ${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdb \
- init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
-
-saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
- #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
- #load ./init.c $(SFILES)
- #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
- #unload ${srcdir}/nindy-share/[A-Z]*
- #load c-exp.tab.c m2-exp.tab.c
- #load copying.c version.c
- #load ../libiberty/libiberty.a
- #load ../bfd/libbfd.a
- #load ../readline/libreadline.a
- #load ../mmalloc/libmmalloc.a
- #load -ltermcap
- #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
- echo "Load .c corresponding to:" $(DEPFILES)
-
-
-# This is useful when debugging GDB, because some Unix's don't let you run GDB
-# on itself without copying the executable. So "make gdb1" will make
-# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
-# Removing gdb1 before the copy is the right thing if gdb1 is open
-# in another process.
-gdb1: gdb
- rm -f gdb1
- cp gdb gdb1
-
-# This is a remote stub which runs under unix and starts up an
-# inferior process. This is at least useful for debugging GDB's
-# remote support.
-rapp: $(RAPP_OBS)
- rm -f rapp_init.c
- ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
- ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
-
-# Support for building Makefile out of configured pieces, automatically
-# generated dependencies, etc. alldeps.mak is a file that contains
-# "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
-# ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
-# contents of the config subdirectory.
-
-alldeps.mak: ${srcdir}/config
- rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
- for i in `ls -d ${srcdir}/config/*.m[ht]` ; do \
- echo $$i >>allconfig.tmp; \
- awk <$$i ' \
- $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
- for (i = 2; i <= NF; i++) \
- print $$i >> "alldeps.tmp" ; \
- } \
- $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
- print $$2 >> "allparam.tmp" }' ; \
- done
- sort <alldeps.tmp | uniq | \
- sed -e 's/arm-convert.o/arm-convert.s/' \
- -e 's!^Onindy.o!nindy-share/Onindy.c!' \
- -e 's!^nindy.o!nindy-share/nindy.c!' \
- -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
- -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
- -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
- -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
- -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
- -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
- -e 's!udr.o!29k-share/udi/udr.c!' \
- -e 's!yank.o!29k-share/dfe/yank.c!' \
- -e 's!udip2soc.o!29k-share/udi/udip2soc.c!' \
- -e 's!mini2udi.o!29k-share/dfe/mini2udi.c!' \
- -e 's/\.o/.c/' \
- >alldeps2.tmp
- echo '# Start of "alldeps.mak" definitions' \
- >>alldeps.mak;
- echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
- >>alldeps.mak;
- grep -v / alldeps2.tmp | \
- awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
- NR == 0 {printf $$0;} \
- NR != 0 {printf "\\\n" $$0} \
- END {printf "\n\n"}' >>alldeps.mak;
- grep / alldeps2.tmp | \
- awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
- NR == 0 {printf $$0;} \
- NR != 0 {printf "\\\n" $$0} \
- END {printf "\n\n"}' >>alldeps.mak;
- sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
- NR == 0 {printf $$0;} \
- NR != 0 {printf "\\\n" $$0} \
- END {printf "\n\n"}' >>alldeps.mak;
- sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
- NR == 0 {printf $$0;} \
- NR != 0 {printf "\\\n" $$0} \
- END {printf "\n\n"}' >>alldeps.mak;
- echo '# End of "alldeps.mak" definitions' \
- >>alldeps.mak;
- rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
-
-# The sed script makes everything which depends on {x,t}m.h depend on
-# config.status as well, in case someone reconfigures gdb out from
-# under an already compiled gdb.
-depend: $(SOURCES) Makefile.in
- @echo Ignore errors about non-existent system-supplied include files
- @echo for systems other than the one you are using.
- @echo Also ignore parse errors in valops.c, and any errors in
- @echo arm-convert.s.
- touch xm.h tm.h
- -$(GCC) -MM -nostdinc -I/usr/include $(CFLAGS) -I$(BFD_DIR) \
- $(INCLUDE_CFLAGS) `ls $(SOURCES) | grep -v '\.[hy]$$' | \
- sort -u` >depend.tmp
-# If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
-# for xm.h and tm.h. This allows the same "depend" file to be used
-# by the various subdirectories.
- if [ "${srcdir}" = "." ] ; then \
- <depend.tmp sed \
- -e 's; ./xm.h; xm.h;g' \
- -e 's; ./tm.h; tm.h;g' \
- -e 's; \./; $${srcdir}/;g' \
- -e 's; vx-share/; $${srcdir}/vx-share/;g' \
- -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
- -e 's; 29k-share/; $${srcdir}/29k-share/;g' \
- >depend.tm2; \
- rm depend.tmp; \
- mv depend.tm2 depend.tmp; \
- fi
- <depend.tmp sed \
- -e 's; [xt]m.h;& config.status;g' \
- -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
- -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
- -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
- -e 's; ./xm.h; xm.h config.status;g' \
- -e 's; ./tm.h; tm.h config.status;g' \
- >depend
- rm depend.tmp
-
-config.status:
- @echo "You must configure gdb. Look at the README file for details."
- @false
-
-# These are not generated by "make depend" because they only are there
-# for some machines.
-# But these rules don't do what we want; we want to hack the foo.o: tm.h
-# dependency to do the right thing.
-tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-68k.h
-tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-68k.h
-xm-news1000.h: xm-news.h
-xm-i386-sv32.h: xm-i386.h
-tm-i386gas.h: tm-i386.h
-xm-sun4os4.h: xm-sparc.h
-tm-sun4os4.h: tm-sparc.h
-xm-vaxult.h: xm-vax.h
-xm-vaxbsd.h: xm-vax.h
-
-kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
- rm -f init.c
- $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
- $(CC) $(LDFLAGS) -c init.c $(CLIBS)
- ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
- -lc $(CLIBS)
-
-# Put the proper machine-specific files first.
-# createtags will edit the .o in DEPFILES into .c
-TAGS: ${TAGFILES}
- $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
-tags: TAGS
-
-# Making distributions of GDB and friends.
-
-# Make a directory `proto-gdb.dir' that contains an image of the GDB
-# directory of the distribution, built up with symlinks.
-make-proto-gdb.dir: force_update
- $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
- $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
-
-# Make a tar file containing the GDB directory of the distribution.
-gdb.tar.Z: force_update
- $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
- $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z
-
-# Set up the GDB directory for distribution, by building all files that
-# are products of other files.
-setup-to-dist: force_update
- ../configure none
- rm -f alldeps.mak
- $(MAKE) $(MFLAGS) alldeps.mak
- ../configure none
- rm -f depend
- $(MAKE) $(MFLAGS) depend
- ../configure none
- (cd doc; $(MAKE) $(MFLAGS) gdbVN.m4)
- $(MAKE) $(MFLAGS) gdb.info
- $(MAKE) $(MFLAGS) refcard.ps
-
-# Build a tar file from a proto-gdb.dir.
-gdb-$(VERSION).tar.Z: force_update
- rm -f gdb.tar gdb-$(VERSION).tar.Z
- $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
- ln -s proto-gdb.dir $(DIST)
- tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z
- rm -rf $(DIST) proto-gdb.dir
-
-# Build a proto-gdb.dir after GDB has been set up for distribution.
-# This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
-# built in the setup-to-dist process, since it defines things like ALLCONFIG
-# and ALLDEPFILES, that we need.
-make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info
- rm -rf proto-gdb.dir
- mkdir proto-gdb.dir
- cd proto-gdb.dir ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
- cd proto-gdb.dir ; ln -s ../${INFOFILES} .
- cd proto-gdb.dir ; for i in ${TARDIRS}; do \
- mkdir $$i; cd $$i; \
- ln -s ../../$$i/* .; \
- rm -rf SCCS CVS.adm RCS config.status; \
- if test -f Makefile.in; then rm Makefile; else true; fi; done
- mkdir proto-gdb.dir/config
- cd proto-gdb.dir/config ; \
- for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
- mkdir proto-gdb.dir/vx-share proto-gdb.dir/nindy-share \
- proto-gdb.dir/29k-share
- mkdir proto-gdb.dir/29k-share/include proto-gdb.dir/29k-share/udi
- mkdir proto-gdb.dir/29k-share/dfe
- cd proto-gdb.dir/config ; \
- for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \
- do ln -s ../../$$i ../$$i ; done
- chmod og=u `find . -print`
-
-clean:
- rm -f *.o ${ADD_FILES} *~
- rm -f init.c version.c
- rm -f gdb core gdb.tar gdb.tar.Z make.log
- rm -f gdb[0-9]
- @$(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS)"
-
-distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
- rm -f tm.h xm.h config.status
- rm -f y.output yacc.acts yacc.tmp
- rm -f ${TESTS} Makefile depend
- @$(MAKE) subdir_do DO=distclean "DODIRS=$(SUBDIRS)"
-
-realclean: clean
- rm -f c-exp.tab.c m2-exp.tab.c TAGS
- rm -f tm.h xm.h config.status
- rm -f Makefile depend
- @$(MAKE) subdir_do DO=realclean "DODIRS=$(SUBDIRS)"
-
-STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
-
-subdir_do: force
- @for i in $(DODIRS); do \
- if [ -d ./$$i ] ; then \
- if (cd ./$$i; \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "CFLAGS=$(CFLAGS)" \
- "RANLIB=$(RANLIB)" \
- "MAKEINFO=$(MAKEINFO)" \
- "INSTALL=$(INSTALL)" \
- "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
- "INSTALL_DATA=$(INSTALL_DATA)" \
- "BISON=$(BISON)" $(DO)) ; then true ; \
- else exit 1 ; fi ; \
- else true ; fi ; \
- done
-
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
- $(SHELL) ./config.status
-
-force:
-
-# Documentation!
-# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
-refcard.dvi: $(srcdir)/doc/refcard.tex
- ( cd ./doc; $(MAKE) refcard.dvi )
- mv ./doc/refcard.dvi .
-
-# GDB QUICK REFERENCE (PostScript output, common PS fonts)
-refcard.ps: $(srcdir)/doc/refcard.tex
- ( cd ./doc; $(MAKE) refcard.ps )
- mv ./doc/refcard.ps .
-
-# GDB MANUAL: TeX dvi file
-gdb.dvi: ./doc/gdb-all.texi
- ( cd ./doc; $(MAKE) M4=$(M4) gdb.dvi )
- mv ./doc/gdb.dvi .
-
-# GDB MANUAL: info file
-gdb.info: ./doc/gdb-all.texi
- ( cd ./doc; $(MAKE) M4=$(M4) gdb.info )
- mv ./doc/gdb.info* .
-
-./doc/gdb-all.texi:
- (cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb-all.texi)
-
-# Make copying.c from COPYING
-copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk
- awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c
-
-version.c: Makefile
- echo 'char *version = "$(VERSION)";' >version.c
-
-# c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
-# in srcdir, then compiled in target dir to c-exp.tab.o.
-c-exp.tab.o: c-exp.tab.c
-c-exp.tab.c: $(srcdir)/c-exp.y
- @echo 'Expect 4 shift/reduce conflicts.'
- ${YACC} $(srcdir)/c-exp.y
- -mv y.tab.c c-exp.tab.c
-
-# m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
-# in srcdir, then compiled in target dir to m2-exp.tab.o.
-m2-exp.tab.o: m2-exp.tab.c
-m2-exp.tab.c: $(srcdir)/m2-exp.y
- ${YACC} $(srcdir)/m2-exp.y
- -mv y.tab.c m2-exp.tab.c
-
-# The symbol-file readers have dependencies on BFD header files.
-dbxread.o: ${srcdir}/dbxread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
-
-coffread.o: ${srcdir}/coffread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
-
-mipsread.o: ${srcdir}/mipsread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
-
-elfread.o: ${srcdir}/elfread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c
-
-dwarfread.o: ${srcdir}/dwarfread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dwarfread.c
-
-xcoffread.o: ${srcdir}/xcoffread.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c
-
-xcoffexec.o: ${srcdir}/xcoffexec.c
- ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c
-
-# Drag in the files that are in another directory.
-
-xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ld.c
-
-xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
-
-xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
-
-xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_regs.c
-
-nindy.o: ${srcdir}/nindy-share/nindy.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/nindy.c
-
-Onindy.o: ${srcdir}/nindy-share/Onindy.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/Onindy.c
-
-ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttybreak.c
-
-ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c
-
-udr.o: ${srcdir}/29k-share/udi/udr.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udr.c
-
-udip2soc.o: ${srcdir}/29k-share/udi/udip2soc.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udip2soc.c
-
-mini2udi.o: ${srcdir}/29k-share/dfe/mini2udi.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/dfe/mini2udi.c
-
-yank.o: ${srcdir}/29k-share/dfe/yank.c
- ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/dfe/yank.c
-
-lint: $(LINTFILES)
- $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
- `echo ${DEPFILES} | sed 's/\.o /\.c /g'
-
-gdb.cxref: $(SFILES)
- cxref -I. $(SFILES) >gdb.cxref
-
-force_update:
-
-# Generate the demangler linked in with gdb. Also create a standalone
-# demangler if so desired ("make demangle").
-
-${DEMANGLER}.o: ${DEMANGLER}.c
- ${CC} -c ${INTERNAL_CFLAGS} ${DEMANGLE_OPTS} \
- `echo ${srcdir}/${DEMANGLER}.c | sed 's,^\./,,'`
-
-demangle: ${DEMANGLER}.c
- ${CC} -o $@ -DMAIN ${INTERNAL_CFLAGS} ${DEMANGLE_OPTS} \
- `echo ${srcdir}/${DEMANGLER}.c | sed 's,^\./,,'`
-
-# GNU Make has an annoying habit of putting *all* the Makefile variables
-# into the environment, unless you include this target as a circumvention.
-# Rumor is that this will be fixed (and this target can be removed)
-# in GNU Make 4.0.
-.NOEXPORT:
-
-# This is the end of "Makefile.in". When built into "Makefile"
-# by the configure script, two things are added below this point:
-# alldeps.mak -- defintions of all files that are used in
-# host- or target-dependent configurations
-# depend -- what .o files depend on what .c and .h files,
-# for all configurations.
-
-
projects / deliverable / binutils-gdb.git / blobdiff