What has changed in GDB?
(Organized release by release)
-*** Changes since GDB-4.18:
+*** Changes since GDB 5.2:
+
+
+*** Changes in GDB 5.2:
+
+* New command "set trust-readonly-sections on[off]".
+
+This command is a hint that tells gdb that read-only sections
+really are read-only (ie. that their contents will not change).
+In this mode, gdb will go to the object file rather than the
+target to read memory from read-only sections (such as ".text").
+This can be a significant performance improvement on some
+(notably embedded) targets.
+
+* New command "generate-core-file" (or "gcore").
+
+This new gdb command allows the user to drop a core file of the child
+process state at any time. So far it's been implemented only for
+GNU/Linux and Solaris, but should be relatively easily ported to other
+hosts. Argument is core file name (defaults to core.<pid>).
+
+* New command line option
+
+GDB now accepts --pid or -p followed by a process id.
+
+* Change in command line behavior -- corefiles vs. process ids.
+
+There is a subtle behavior in the way in which GDB handles
+command line arguments. The first non-flag argument is always
+a program to debug, but the second non-flag argument may either
+be a corefile or a process id. Previously, GDB would attempt to
+open the second argument as a corefile, and if that failed, would
+issue a superfluous error message and then attempt to attach it as
+a process. Now, if the second argument begins with a non-digit,
+it will be treated as a corefile. If it begins with a digit,
+GDB will attempt to attach it as a process, and if no such process
+is found, will then attempt to open it as a corefile.
+
+* Changes in ARM configurations.
+
+Multi-arch support is enabled for all ARM configurations. The ARM/NetBSD
+configuration is fully multi-arch.
+
+* New native configurations
+
+ARM NetBSD arm*-*-netbsd*
+x86 OpenBSD i[3456]86-*-openbsd*
+AMD x86-64 running GNU/Linux x86_64-*-linux-*
+Sparc64 running FreeBSD sparc64-*-freebsd*
+
+* New targets
+
+Sanyo XStormy16 xstormy16-elf
+
+* OBSOLETE configurations and files
+
+Configurations that have been declared obsolete in this release have
+been commented out. Unless there is activity to revive these
+configurations, the next release of GDB will have their sources
+permanently REMOVED.
+
+AMD 29k family via UDI a29k-amd-udi, udi29k
+A29K VxWorks a29k-*-vxworks
+AMD 29000 embedded, using EBMON a29k-none-none
+AMD 29000 embedded with COFF a29k-none-coff
+AMD 29000 embedded with a.out a29k-none-aout
+
+testsuite/gdb.hp/gdb.threads-hp/ directory
+
+* REMOVED configurations and files
+
+TI TMS320C80 tic80-*-*
+WDC 65816 w65-*-*
+PowerPC Solaris powerpcle-*-solaris*
+PowerPC Windows NT powerpcle-*-cygwin32
+PowerPC Netware powerpc-*-netware*
+Harris/CXUX m88k m88*-harris-cxux*
+Most ns32k hosts and targets ns32k-*-mach3* ns32k-umax-*
+ ns32k-utek-sysv* ns32k-utek-*
+SunOS 4.0.Xi on i386 i[3456]86-*-sunos*
+Ultracomputer (29K) running Sym1 a29k-nyu-sym1 a29k-*-kern*
+Sony NEWS (68K) running NEWSOS 3.x m68*-sony-sysv news
+ISI Optimum V (3.05) under 4.3bsd. m68*-isi-*
+Apple Macintosh (MPW) host and target N/A host, powerpc-*-macos*
+
+* Changes to command line processing
+
+The new `--args' feature can be used to specify command-line arguments
+for the inferior from gdb's command line.
+
+* Changes to key bindings
+
+There is a new `operate-and-get-next' function bound to `C-o'.
+
+*** Changes in GDB 5.1.1
+
+Fix compile problem on DJGPP.
+
+Fix a problem with floating-point registers on the i386 being
+corrupted.
+
+Fix to stop GDB crashing on .debug_str debug info.
+
+Numerous documentation fixes.
+
+Numerous testsuite fixes.
+
+*** Changes in GDB 5.1:
+
+* New native configurations
+
+Alpha FreeBSD alpha*-*-freebsd*
+x86 FreeBSD 3.x and 4.x i[3456]86*-freebsd[34]*
+MIPS GNU/Linux mips*-*-linux*
+MIPS SGI Irix 6.x mips*-sgi-irix6*
+ia64 AIX ia64-*-aix*
+s390 and s390x GNU/Linux {s390,s390x}-*-linux*
+
+* New targets
+
+Motorola 68HC11 and 68HC12 m68hc11-elf
+CRIS cris-axis
+UltraSparc running GNU/Linux sparc64-*-linux*
+
+* OBSOLETE configurations and files
+
+x86 FreeBSD before 2.2 i[3456]86*-freebsd{1,2.[01]}*,
+Harris/CXUX m88k m88*-harris-cxux*
+Most ns32k hosts and targets ns32k-*-mach3* ns32k-umax-*
+ ns32k-utek-sysv* ns32k-utek-*
+TI TMS320C80 tic80-*-*
+WDC 65816 w65-*-*
+Ultracomputer (29K) running Sym1 a29k-nyu-sym1 a29k-*-kern*
+PowerPC Solaris powerpcle-*-solaris*
+PowerPC Windows NT powerpcle-*-cygwin32
+PowerPC Netware powerpc-*-netware*
+SunOS 4.0.Xi on i386 i[3456]86-*-sunos*
+Sony NEWS (68K) running NEWSOS 3.x m68*-sony-sysv news
+ISI Optimum V (3.05) under 4.3bsd. m68*-isi-*
+Apple Macintosh (MPW) host N/A
+
+stuff.c (Program to stuff files into a specially prepared space in kdb)
+kdb-start.c (Main loop for the standalone kernel debugger)
+
+Configurations that have been declared obsolete in this release have
+been commented out. Unless there is activity to revive these
+configurations, the next release of GDB will have their sources
+permanently REMOVED.
+
+* REMOVED configurations and files
+
+Altos 3068 m68*-altos-*
+Convex c1-*-*, c2-*-*
+Pyramid pyramid-*-*
+ARM RISCix arm-*-* (as host)
+Tahoe tahoe-*-*
+ser-ocd.c *-*-*
+
+* GDB has been converted to ISO C.
+
+GDB's source code has been converted to ISO C. In particular, the
+sources are fully protoized, and rely on standard headers being
+present.
+
+* Other news:
+
+* "info symbol" works on platforms which use COFF, ECOFF, XCOFF, and NLM.
+
+* The MI enabled by default.
+
+The new machine oriented interface (MI) introduced in GDB 5.0 has been
+revised and enabled by default. Packages which use GDB as a debugging
+engine behind a UI or another front end are encouraged to switch to
+using the GDB/MI interface, instead of the old annotations interface
+which is now deprecated.
+
+* Support for debugging Pascal programs.
+
+GDB now includes support for debugging Pascal programs. The following
+main features are supported:
+
+ - Pascal-specific data types such as sets;
+
+ - automatic recognition of Pascal sources based on file-name
+ extension;
+
+ - Pascal-style display of data types, variables, and functions;
+
+ - a Pascal expression parser.
+
+However, some important features are not yet supported.
+
+ - Pascal string operations are not supported at all;
+
+ - there are some problems with boolean types;
+
+ - Pascal type hexadecimal constants are not supported
+ because they conflict with the internal variables format;
+
+ - support for Pascal objects and classes is not full yet;
+
+ - unlike Pascal, GDB is case-sensitive for symbol names.
+
+* Changes in completion.
+
+Commands such as `shell', `run' and `set args', which pass arguments
+to inferior programs, now complete on file names, similar to what
+users expect at the shell prompt.
+
+Commands which accept locations, such as `disassemble', `print',
+`breakpoint', `until', etc. now complete on filenames as well as
+program symbols. Thus, if you type "break foob TAB", and the source
+files linked into the programs include `foobar.c', that file name will
+be one of the candidates for completion. However, file names are not
+considered for completion after you typed a colon that delimits a file
+name from a name of a function in that file, as in "break foo.c:bar".
+
+`set demangle-style' completes on available demangling styles.
+
+* New platform-independent commands:
+
+It is now possible to define a post-hook for a command as well as a
+hook that runs before the command. For more details, see the
+documentation of `hookpost' in the GDB manual.
+
+* Changes in GNU/Linux native debugging.
+
+Support for debugging multi-threaded programs has been completely
+revised for all platforms except m68k and sparc. You can now debug as
+many threads as your system allows you to have.
+
+Attach/detach is supported for multi-threaded programs.
+
+Support for SSE registers was added for x86. This doesn't work for
+multi-threaded programs though.
+
+* Changes in MIPS configurations.
+
+Multi-arch support is enabled for all MIPS configurations.
+
+GDB can now be built as native debugger on SGI Irix 6.x systems for
+debugging n32 executables. (Debugging 64-bit executables is not yet
+supported.)
+
+* Unified support for hardware watchpoints in all x86 configurations.
+
+Most (if not all) native x86 configurations support hardware-assisted
+breakpoints and watchpoints in a unified manner. This support
+implements debug register sharing between watchpoints, which allows to
+put a virtually infinite number of watchpoints on the same address,
+and also supports watching regions up to 16 bytes with several debug
+registers.
+
+The new maintenance command `maintenance show-debug-regs' toggles
+debugging print-outs in functions that insert, remove, and test
+watchpoints and hardware breakpoints.
+
+* Changes in the DJGPP native configuration.
+
+New command ``info dos sysinfo'' displays assorted information about
+the CPU, OS, memory, and DPMI server.
+
+New commands ``info dos gdt'', ``info dos ldt'', and ``info dos idt''
+display information about segment descriptors stored in GDT, LDT, and
+IDT.
+
+New commands ``info dos pde'' and ``info dos pte'' display entries
+from Page Directory and Page Tables (for now works with CWSDPMI only).
+New command ``info dos address-pte'' displays the Page Table entry for
+a given linear address.
+
+GDB can now pass command lines longer than 126 characters to the
+program being debugged (requires an update to the libdbg.a library
+which is part of the DJGPP development kit).
+
+DWARF2 debug info is now supported.
+
+It is now possible to `step' and `next' through calls to `longjmp'.
+
+* Changes in documentation.
+
+All GDB documentation was converted to GFDL, the GNU Free
+Documentation License.
+
+Tracepoints-related commands are now fully documented in the GDB
+manual.
+
+TUI, the Text-mode User Interface, is now documented in the manual.
+
+Tracepoints-related commands are now fully documented in the GDB
+manual.
+
+The "GDB Internals" manual now has an index. It also includes
+documentation of `ui_out' functions, GDB coding standards, x86
+hardware watchpoints, and memory region attributes.
+
+* GDB's version number moved to ``version.in''
+
+The Makefile variable VERSION has been replaced by the file
+``version.in''. People creating GDB distributions should update the
+contents of this file.
+
+* gdba.el deleted
+
+GUD support is now a standard part of the EMACS distribution.
+
+*** Changes in GDB 5.0:
+
+* Improved support for debugging FP programs on x86 targets
+
+Unified and much-improved support for debugging floating-point
+programs on all x86 targets. In particular, ``info float'' now
+displays the FP registers in the same format on all x86 targets, with
+greater level of detail.
+
+* Improvements and bugfixes in hardware-assisted watchpoints
+
+It is now possible to watch array elements, struct members, and
+bitfields with hardware-assisted watchpoints. Data-read watchpoints
+on x86 targets no longer erroneously trigger when the address is
+written.
+
+* Improvements in the native DJGPP version of GDB
+
+The distribution now includes all the scripts and auxiliary files
+necessary to build the native DJGPP version on MS-DOS/MS-Windows
+machines ``out of the box''.
+
+The DJGPP version can now debug programs that use signals. It is
+possible to catch signals that happened in the debuggee, deliver
+signals to it, interrupt it with Ctrl-C, etc. (Previously, a signal
+would kill the program being debugged.) Programs that hook hardware
+interrupts (keyboard, timer, etc.) can also be debugged.
+
+It is now possible to debug DJGPP programs that redirect their
+standard handles or switch them to raw (as opposed to cooked) mode, or
+even close them. The command ``run < foo > bar'' works as expected,
+and ``info terminal'' reports useful information about the debuggee's
+terminal, including raw/cooked mode, redirection, etc.
+
+The DJGPP version now uses termios functions for console I/O, which
+enables debugging graphics programs. Interrupting GDB with Ctrl-C
+also works.
+
+DOS-style file names with drive letters are now fully supported by
+GDB.
+
+It is now possible to debug DJGPP programs that switch their working
+directory. It is also possible to rerun the debuggee any number of
+times without restarting GDB; thus, you can use the same setup,
+breakpoints, etc. for many debugging sessions.
+
+* New native configurations
+
+ARM GNU/Linux arm*-*-linux*
+PowerPC GNU/Linux powerpc-*-linux*
* New targets
+Motorola MCore mcore-*-*
x86 VxWorks i[3456]86-*-vxworks*
PowerPC VxWorks powerpc-*-vxworks*
TI TMS320C80 tic80-*-*
Altos 3068 m68*-altos-*
Convex c1-*-*, c2-*-*
Pyramid pyramid-*-*
+ARM RISCix arm-*-* (as host)
+Tahoe tahoe-*-*
+
+Configurations that have been declared obsolete will be commented out,
+but the code will be left in place. If there is no activity to revive
+these configurations before the next release of GDB, the sources will
+be permanently REMOVED.
+
+* Gould support removed
+
+Support for the Gould PowerNode and NP1 has been removed.
+
+* New features for SVR4
+
+On SVR4 native platforms (such as Solaris), if you attach to a process
+without first loading a symbol file, GDB will now attempt to locate and
+load symbols from the running process's executable file.
+
+* Many C++ enhancements
+
+C++ support has been greatly improved. Overload resolution now works properly
+in almost all cases. RTTI support is on the way.
* Remote targets can connect to a sub-program
The command ``set remote-mips64-transfers-32bit-regs on'' has been
added to provide backward compatibility with older versions of GDB.
+* ``set remotebinarydownload'' replaced by ``set remote X-packet''
+
+The command ``set remotebinarydownload'' command has been replaced by
+``set remote X-packet''. Other commands in ``set remote'' family
+include ``set remote P-packet''.
+
+* Breakpoint commands accept ranges.
+
+The breakpoint commands ``enable'', ``disable'', and ``delete'' now
+accept a range of breakpoints, e.g. ``5-7''. The tracepoint command
+``tracepoint passcount'' also accepts a range of tracepoints.
+
+* ``apropos'' command added.
+
+The ``apropos'' command searches through command names and
+documentation strings, printing out matches, making it much easier to
+try to find a command that does what you are looking for.
+
+* New MI interface
+
+A new machine oriented interface (MI) has been added to GDB. This
+interface is designed for debug environments running GDB as a separate
+process. This is part of the long term libGDB project. See the
+"GDB/MI" chapter of the GDB manual for further information. It can be
+enabled by configuring with:
+
+ .../configure --enable-gdbmi
+
*** Changes in GDB-4.18:
* New native configurations
HP-UX 10.20 hppa*-*-hpux10.20
HP-UX 11.x hppa*-*-hpux11.0*
-M68K Linux m68*-*-linux*
+M68K GNU/Linux m68*-*-linux*
* New targets
There is a new hardware breakpoint for the watch command for sparclite
targets. See gdb/sparclite/hw_breakpoint.note.
-Hardware watchpoints are also now supported under Linux.
+Hardware watchpoints are also now supported under GNU/Linux.
* Annotations
Solaris-2.0 !!! sparc-sun-solaris2 or sun4sol2
-Linux support i386-unknown-linux or linux
+GNU/Linux support i386-unknown-linux or linux
We are also including code to support the HP/PA running BSD and HPUX. This
is almost guaranteed not to work, as we didn't have time to test or build it
projects / deliverable / binutils-gdb.git / blobdiff