/* Target-dependent code for the ALPHA architecture, for GDB, the GNU Debugger.
- Copyright 1993, 1994 Free Software Foundation, Inc.
+ Copyright 1993, 1994, 1995 Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "frame.h"
#include "dis-asm.h"
#include "symfile.h"
#include "objfiles.h"
+#include "gdb_string.h"
/* FIXME: Some of this code should perhaps be merged with mips-tdep.c. */
static CORE_ADDR after_prologue PARAMS ((CORE_ADDR pc,
alpha_extra_func_info_t proc_desc));
-static int in_prologue PARAMS ((CORE_ADDR pc,
+static int alpha_in_prologue PARAMS ((CORE_ADDR pc,
alpha_extra_func_info_t proc_desc));
/* Heuristic_proc_start may hunt through the text section for a long
} *linked_proc_desc_table = NULL;
\f
-/* Guaranteed to set fci->saved_regs to some values (it never leaves it
+/* Under Linux, signal handler invocations can be identified by the
+ designated code sequence that is used to return from a signal
+ handler. In particular, the return address of a signal handler
+ points to the following sequence (the first instruction is quadword
+ aligned):
+
+ bis $30,$30,$16
+ addq $31,0x67,$0
+ call_pal callsys
+
+ Each instruction has a unique encoding, so we simply attempt to
+ match the instruction the pc is pointing to with any of the above
+ instructions. If there is a hit, we know the offset to the start
+ of the designated sequence and can then check whether we really are
+ executing in a designated sequence. If not, -1 is returned,
+ otherwise the offset from the start of the desingated sequence is
+ returned.
+
+ There is a slight chance of false hits: code could jump into the
+ middle of the designated sequence, in which case there is no
+ guarantee that we are in the middle of a sigreturn syscall. Don't
+ think this will be a problem in praxis, though.
+*/
+long
+alpha_linux_sigtramp_offset (CORE_ADDR pc)
+{
+ unsigned int i[3], w;
+ long off, res;
+
+ if (read_memory_nobpt(pc, (char *) &w, 4) != 0)
+ return -1;
+
+ off = -1;
+ switch (w)
+ {
+ case 0x47de0410: off = 0; break; /* bis $30,$30,$16 */
+ case 0x43ecf400: off = 4; break; /* addq $31,0x67,$0 */
+ case 0x00000083: off = 8; break; /* call_pal callsys */
+ default: return -1;
+ }
+ pc -= off;
+ if (pc & 0x7)
+ {
+ /* designated sequence is not quadword aligned */
+ return -1;
+ }
+
+ if (read_memory_nobpt(pc, (char *) i, sizeof(i)) != 0)
+ return -1;
+
+ if (i[0] == 0x47de0410 && i[1] == 0x43ecf400 && i[2] == 0x00000083)
+ return off;
+
+ return -1;
+}
+
+\f
+/* Under OSF/1, the __sigtramp routine is frameless and has a frame
+ size of zero, but we are able to backtrace through it. */
+CORE_ADDR
+alpha_osf_skip_sigtramp_frame (frame, pc)
+ struct frame_info *frame;
+ CORE_ADDR pc;
+{
+ char *name;
+ find_pc_partial_function (pc, &name, (CORE_ADDR *)NULL, (CORE_ADDR *)NULL);
+ if (IN_SIGTRAMP (pc, name))
+ return frame->frame;
+ else
+ return 0;
+}
+
+\f
+/* Dynamically create a signal-handler caller procedure descriptor for
+ the signal-handler return code starting at address LOW_ADDR. The
+ descriptor is added to the linked_proc_desc_table. */
+
+alpha_extra_func_info_t
+push_sigtramp_desc (CORE_ADDR low_addr)
+{
+ struct linked_proc_info *link;
+ alpha_extra_func_info_t proc_desc;
+
+ link = (struct linked_proc_info *)
+ xmalloc (sizeof (struct linked_proc_info));
+ link->next = linked_proc_desc_table;
+ linked_proc_desc_table = link;
+
+ proc_desc = &link->info;
+
+ proc_desc->numargs = 0;
+ PROC_LOW_ADDR (proc_desc) = low_addr;
+ PROC_HIGH_ADDR (proc_desc) = low_addr + 3 * 4;
+ PROC_DUMMY_FRAME (proc_desc) = 0;
+ PROC_FRAME_OFFSET (proc_desc) = 0x298; /* sizeof(struct sigcontext_struct) */
+ PROC_FRAME_REG (proc_desc) = SP_REGNUM;
+ PROC_REG_MASK (proc_desc) = 0xffff;
+ PROC_FREG_MASK (proc_desc) = 0xffff;
+ PROC_PC_REG (proc_desc) = 26;
+ PROC_LOCALOFF (proc_desc) = 0;
+ SET_PROC_DESC_IS_DYN_SIGTRAMP (proc_desc);
+}
+
+\f
+/* Guaranteed to set frame->saved_regs to some values (it never leaves it
NULL). */
void
obstack_alloc (&frame_cache_obstack, sizeof(struct frame_saved_regs));
memset (frame->saved_regs, 0, sizeof (struct frame_saved_regs));
+ /* If it is the frame for __sigtramp, the saved registers are located
+ in a sigcontext structure somewhere on the stack. __sigtramp
+ passes a pointer to the sigcontext structure on the stack.
+ If the stack layout for __sigtramp changes, or if sigcontext offsets
+ change, we might have to update this code. */
+#ifndef SIGFRAME_PC_OFF
+#define SIGFRAME_PC_OFF (2 * 8)
+#define SIGFRAME_REGSAVE_OFF (4 * 8)
+#define SIGFRAME_FPREGSAVE_OFF (SIGFRAME_REGSAVE_OFF + 32 * 8 + 8)
+#endif
+ if (frame->signal_handler_caller)
+ {
+ CORE_ADDR sigcontext_addr;
+
+ sigcontext_addr = SIGCONTEXT_ADDR (frame);
+ for (ireg = 0; ireg < 32; ireg++)
+ {
+ reg_position = sigcontext_addr + SIGFRAME_REGSAVE_OFF + ireg * 8;
+ frame->saved_regs->regs[ireg] = reg_position;
+ }
+ for (ireg = 0; ireg < 32; ireg++)
+ {
+ reg_position = sigcontext_addr + SIGFRAME_FPREGSAVE_OFF + ireg * 8;
+ frame->saved_regs->regs[FP0_REGNUM + ireg] = reg_position;
+ }
+ frame->saved_regs->regs[PC_REGNUM] = sigcontext_addr + SIGFRAME_PC_OFF;
+ return;
+ }
+
proc_desc = frame->proc_desc;
if (proc_desc == NULL)
/* I'm not sure how/whether this can happen. Normally when we can't
returnreg = PROC_PC_REG (proc_desc);
- /* Note that RA is always saved first, regardless of it's actual
+ /* Note that RA is always saved first, regardless of its actual
register number. */
if (mask & (1 << returnreg))
{
struct frame_info *fi;
int regno;
{
- /* If it is the frame for sigtramp we have a pointer to the sigcontext
- on the stack.
- If the stack layout for __sigtramp changes or if sigcontext offsets
- change we might have to update this code. */
-#ifndef SIGFRAME_PC_OFF
-#define SIGFRAME_PC_OFF (2 * 8)
-#define SIGFRAME_REGSAVE_OFF (4 * 8)
-#endif
for (; fi; fi = fi->next)
{
- if (fi->signal_handler_caller)
- {
- int offset;
- CORE_ADDR sigcontext_addr = read_memory_integer(fi->frame, 8);
-
- if (regno == PC_REGNUM)
- offset = SIGFRAME_PC_OFF;
- else if (regno < 32)
- offset = SIGFRAME_REGSAVE_OFF + regno * 8;
- else
- return 0;
- return read_memory_integer(sigcontext_addr + offset, 8);
- }
- else if (regno == SP_REGNUM)
+ /* We have to get the saved sp from the sigcontext
+ if it is a signal handler frame. */
+ if (regno == SP_REGNUM && !fi->signal_handler_caller)
return fi->frame;
else
{
alpha_extra_func_info_t proc_desc = frame->proc_desc;
/* We have to get the saved pc from the sigcontext
if it is a signal handler frame. */
- int pcreg = frame->signal_handler_caller ? PC_REGNUM
- : (proc_desc ? PROC_PC_REG(proc_desc) : RA_REGNUM);
+ int pcreg = frame->signal_handler_caller ? PC_REGNUM : frame->pc_reg;
if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
return read_memory_integer(frame->frame - 8, 8);
alpha_saved_pc_after_call (frame)
struct frame_info *frame;
{
- alpha_extra_func_info_t proc_desc = find_proc_desc (frame->pc, frame->next);
- int pcreg = proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM;
+ CORE_ADDR pc = frame->pc;
+ CORE_ADDR tmp;
+ alpha_extra_func_info_t proc_desc;
+ int pcreg;
+
+ /* Skip over shared library trampoline if necessary. */
+ tmp = SKIP_TRAMPOLINE_CODE (pc);
+ if (tmp != 0)
+ pc = tmp;
- return read_register (pcreg);
+ proc_desc = find_proc_desc (pc, frame->next);
+ pcreg = proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM;
+
+ if (frame->signal_handler_caller)
+ return alpha_frame_saved_pc (frame);
+ else
+ return read_register (pcreg);
}
int frame_size;
int has_frame_reg = 0;
unsigned long reg_mask = 0;
+ int pcreg = -1;
if (start_pc == 0)
return NULL;
int reg = (word & 0x03e00000) >> 21;
reg_mask |= 1 << reg;
temp_saved_regs.regs[reg] = sp + (short)word;
+
+ /* Starting with OSF/1-3.2C, the system libraries are shipped
+ without local symbols, but they still contain procedure
+ descriptors without a symbol reference. GDB is currently
+ unable to find these procedure descriptors and uses
+ heuristic_proc_desc instead.
+ As some low level compiler support routines (__div*, __add*)
+ use a non-standard return address register, we have to
+ add some heuristics to determine the return address register,
+ or stepping over these routines will fail.
+ Usually the return address register is the first register
+ saved on the stack, but assembler optimization might
+ rearrange the register saves.
+ So we recognize only a few registers (t7, t9, ra) within
+ the procedure prologue as valid return address registers.
+
+ FIXME: Rewriting GDB to access the procedure descriptors,
+ e.g. via the minimal symbol table, might obviate this hack. */
+ if (pcreg == -1
+ && cur_pc < (start_pc + 20)
+ && (reg == T7_REGNUM || reg == T9_REGNUM || reg == RA_REGNUM))
+ pcreg = reg;
}
else if (word == 0x47de040f) /* bis sp,sp fp */
has_frame_reg = 1;
}
+ if (pcreg == -1)
+ {
+ /* If we haven't found a valid return address register yet,
+ keep searching in the procedure prologue. */
+ while (cur_pc < (limit_pc + 20) && cur_pc < (start_pc + 20))
+ {
+ char buf[4];
+ unsigned long word;
+ int status;
+
+ status = read_memory_nobpt (cur_pc, buf, 4);
+ if (status)
+ memory_error (status, cur_pc);
+ cur_pc += 4;
+ word = extract_unsigned_integer (buf, 4);
+
+ if ((word & 0xfc1f0000) == 0xb41e0000 /* stq reg,n($sp) */
+ && (word & 0xffff0000) != 0xb7fe0000) /* reg != $zero */
+ {
+ int reg = (word & 0x03e00000) >> 21;
+ if (reg == T7_REGNUM || reg == T9_REGNUM || reg == RA_REGNUM)
+ {
+ pcreg = reg;
+ break;
+ }
+ }
+ }
+ }
+
if (has_frame_reg)
PROC_FRAME_REG(&temp_proc_desc) = GCC_FP_REGNUM;
else
PROC_FRAME_REG(&temp_proc_desc) = SP_REGNUM;
PROC_FRAME_OFFSET(&temp_proc_desc) = frame_size;
PROC_REG_MASK(&temp_proc_desc) = reg_mask;
- PROC_PC_REG(&temp_proc_desc) = RA_REGNUM;
+ PROC_PC_REG(&temp_proc_desc) = (pcreg == -1) ? RA_REGNUM : pcreg;
PROC_LOCALOFF(&temp_proc_desc) = 0; /* XXX - bogus */
return &temp_proc_desc;
}
if (proc_desc)
{
+ if (PROC_DESC_IS_DYN_SIGTRAMP (proc_desc))
+ return PROC_LOW_ADDR (proc_desc); /* "prologue" is in kernel */
+
/* If function is frameless, then we need to do it the hard way. I
strongly suspect that frameless always means prologueless... */
if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
}
/* Return non-zero if we *might* be in a function prologue. Return zero if we
- are definatly *not* in a function prologue. */
+ are definitively *not* in a function prologue. */
static int
-in_prologue (pc, proc_desc)
+alpha_in_prologue (pc, proc_desc)
CORE_ADDR pc;
alpha_extra_func_info_t proc_desc;
{
0, NULL);
}
+ /* If we never found a PDR for this function in symbol reading, then
+ examine prologues to find the information. */
+ if (sym && ((mips_extra_func_info_t) SYMBOL_VALUE (sym))->pdr.framereg == -1)
+ sym = NULL;
+
if (sym)
{
/* IF this is the topmost frame AND
proc_desc = (alpha_extra_func_info_t)SYMBOL_VALUE(sym);
if (next_frame == NULL)
{
- if (PROC_DESC_IS_DUMMY (proc_desc) || in_prologue (pc, proc_desc))
+ if (PROC_DESC_IS_DUMMY (proc_desc) || alpha_in_prologue (pc, proc_desc))
{
alpha_extra_func_info_t found_heuristic =
heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
pc, next_frame);
- PROC_LOCALOFF (found_heuristic) = PROC_LOCALOFF (proc_desc);
if (found_heuristic)
- proc_desc = found_heuristic;
+ {
+ PROC_LOCALOFF (found_heuristic) =
+ PROC_LOCALOFF (proc_desc);
+ PROC_PC_REG (found_heuristic) = PROC_PC_REG (proc_desc);
+ proc_desc = found_heuristic;
+ }
}
}
}
else
{
+ long offset;
+
/* Is linked_proc_desc_table really necessary? It only seems to be used
by procedure call dummys. However, the procedures being called ought
to have their own proc_descs, and even if they don't,
&& PROC_HIGH_ADDR(&link->info) > pc)
return &link->info;
+ /* If PC is inside a dynamically generated sigtramp handler,
+ create and push a procedure descriptor for that code: */
+ offset = DYNAMIC_SIGTRAMP_OFFSET (pc);
+ if (offset >= 0)
+ return push_sigtramp_desc (pc - offset);
+
if (startaddr == 0)
startaddr = heuristic_proc_start (pc);
/* The previous frame from a sigtramp frame might be frameless
and have frame size zero. */
&& !frame->signal_handler_caller)
- {
- /* The alpha __sigtramp routine is frameless and has a frame size
- of zero, but we are able to backtrace through it. */
- char *name;
- find_pc_partial_function (saved_pc, &name,
- (CORE_ADDR *)NULL, (CORE_ADDR *)NULL);
- if (IN_SIGTRAMP (saved_pc, name))
- return frame->frame;
- else
- return 0;
- }
+ return FRAME_PAST_SIGTRAMP_FRAME (frame, saved_pc);
else
return read_next_frame_reg(frame, PROC_FRAME_REG(proc_desc))
+ PROC_FRAME_OFFSET(proc_desc);
frame->next ? cached_proc_desc : find_proc_desc(frame->pc, frame->next);
frame->saved_regs = NULL;
- frame->proc_desc =
- proc_desc == &temp_proc_desc ? 0 : proc_desc;
+ frame->localoff = 0;
+ frame->pc_reg = RA_REGNUM;
+ frame->proc_desc = proc_desc == &temp_proc_desc ? 0 : proc_desc;
if (proc_desc)
{
- /* Get the locals offset from the procedure descriptor, it is valid
- even if we are in the middle of the prologue. */
+ /* Get the locals offset and the saved pc register from the
+ procedure descriptor, they are valid even if we are in the
+ middle of the prologue. */
frame->localoff = PROC_LOCALOFF(proc_desc);
+ frame->pc_reg = PROC_PC_REG(proc_desc);
/* Fixup frame-pointer - only needed for top frame */
/* This may not be quite right, if proc has a real frame register.
Get the value of the frame relative sp, procedure might have been
interrupted by a signal at it's very start. */
- else if (frame->pc == PROC_LOW_ADDR (proc_desc) && !PROC_DESC_IS_DUMMY (proc_desc))
+ else if (frame->pc == PROC_LOW_ADDR (proc_desc)
+ && !PROC_DESC_IS_DYN_SIGTRAMP (proc_desc))
frame->frame = read_next_frame_reg (frame->next, SP_REGNUM);
else
frame->frame = read_next_frame_reg (frame->next, PROC_FRAME_REG (proc_desc))
if (proc_desc == &temp_proc_desc)
{
- frame->saved_regs = (struct frame_saved_regs*)
- obstack_alloc (&frame_cache_obstack,
- sizeof (struct frame_saved_regs));
- *frame->saved_regs = temp_saved_regs;
- frame->saved_regs->regs[PC_REGNUM] = frame->saved_regs->regs[RA_REGNUM];
+ char *name;
+
+ /* Do not set the saved registers for a sigtramp frame,
+ alpha_find_saved_registers will do that for us.
+ We can't use frame->signal_handler_caller, it is not yet set. */
+ find_pc_partial_function (frame->pc, &name,
+ (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+ if (!IN_SIGTRAMP (frame->pc, name))
+ {
+ frame->saved_regs = (struct frame_saved_regs*)
+ obstack_alloc (&frame_cache_obstack,
+ sizeof (struct frame_saved_regs));
+ *frame->saved_regs = temp_saved_regs;
+ frame->saved_regs->regs[PC_REGNUM]
+ = frame->saved_regs->regs[RA_REGNUM];
+ }
}
}
}
for (i = 0, m_arg = alpha_args; i < nargs; i++, m_arg++)
{
value_ptr arg = args[i];
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
/* Cast argument to long if necessary as the compiler does it too. */
- if (TYPE_LENGTH (VALUE_TYPE (arg)) < TYPE_LENGTH (builtin_type_long))
- arg = value_cast (builtin_type_long, arg);
- m_arg->len = TYPE_LENGTH (VALUE_TYPE (arg));
+ switch (TYPE_CODE (arg_type))
+ {
+ case TYPE_CODE_INT:
+ case TYPE_CODE_BOOL:
+ case TYPE_CODE_CHAR:
+ case TYPE_CODE_RANGE:
+ case TYPE_CODE_ENUM:
+ if (TYPE_LENGTH (arg_type) < TYPE_LENGTH (builtin_type_long))
+ {
+ arg_type = builtin_type_long;
+ arg = value_cast (arg_type, arg);
+ }
+ break;
+ default:
+ break;
+ }
+ m_arg->len = TYPE_LENGTH (arg_type);
m_arg->offset = accumulate_size;
accumulate_size = (accumulate_size + m_arg->len + 7) & ~7;
m_arg->contents = VALUE_CONTENTS(arg);
write_register (SP_REGNUM, new_sp);
flush_cached_frames ();
- if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
+ if (proc_desc && (PROC_DESC_IS_DUMMY(proc_desc)
+ || PROC_DESC_IS_DYN_SIGTRAMP (proc_desc)))
{
struct linked_proc_info *pi_ptr, *prev_ptr;
char regbuf[REGISTER_BYTES];
char *valbuf;
{
- int regnum;
-
- regnum = TYPE_CODE (valtype) == TYPE_CODE_FLT ? FP0_REGNUM : V0_REGNUM;
-
- memcpy (valbuf, regbuf + REGISTER_BYTE (regnum), TYPE_LENGTH (valtype));
+ if (TYPE_CODE (valtype) == TYPE_CODE_FLT)
+ alpha_register_convert_to_virtual (FP0_REGNUM, valtype,
+ regbuf + REGISTER_BYTE (FP0_REGNUM),
+ valbuf);
+ else
+ memcpy (valbuf, regbuf + REGISTER_BYTE (V0_REGNUM), TYPE_LENGTH (valtype));
}
/* Given a return value in `regbuf' with a type `valtype',
struct type *valtype;
char *valbuf;
{
- int regnum;
char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ int regnum = V0_REGNUM;
+ int length = TYPE_LENGTH (valtype);
- regnum = TYPE_CODE (valtype) == TYPE_CODE_FLT ? FP0_REGNUM : V0_REGNUM;
- memcpy(raw_buffer, valbuf, TYPE_LENGTH (valtype));
+ if (TYPE_CODE (valtype) == TYPE_CODE_FLT)
+ {
+ regnum = FP0_REGNUM;
+ length = REGISTER_RAW_SIZE (regnum);
+ alpha_register_convert_to_raw (valtype, regnum, valbuf, raw_buffer);
+ }
+ else
+ memcpy (raw_buffer, valbuf, length);
- write_register_bytes(REGISTER_BYTE (regnum), raw_buffer, TYPE_LENGTH (valtype));
+ write_register_bytes (REGISTER_BYTE (regnum), raw_buffer, length);
}
/* Just like reinit_frame_cache, but with the right arguments to be
projects / deliverable / binutils-gdb.git / blobdiff