-/* Target dependent code for ARC arhitecture, for GDB.
+/* Target dependent code for ARC architecture, for GDB.
- Copyright 2005-2016 Free Software Foundation, Inc.
+ Copyright 2005-2020 Free Software Foundation, Inc.
Contributed by Synopsys Inc.
This file is part of GDB.
/* GDB header files. */
#include "defs.h"
#include "arch-utils.h"
+#include "elf-bfd.h"
#include "disasm.h"
-#include "dwarf2-frame.h"
+#include "dwarf2/frame.h"
#include "frame-base.h"
#include "frame-unwind.h"
#include "gdbcore.h"
#include "gdbcmd.h"
#include "objfiles.h"
+#include "osabi.h"
+#include "prologue-value.h"
+#include "target-descriptions.h"
#include "trad-frame.h"
/* ARC header files. */
#include "opcode/arc.h"
+#include "opcodes/arc-dis.h"
#include "arc-tdep.h"
+#include "arch/arc.h"
/* Standard headers. */
#include <algorithm>
+#include <sstream>
-/* Default target descriptions. */
-#include "features/arc-v2.c"
-#include "features/arc-arcompact.c"
-
-/* The frame unwind cache for the ARC. Current structure is a stub, because
- it should be filled in during the prologue analysis. */
+/* The frame unwind cache for ARC. */
struct arc_frame_cache
{
frame. */
CORE_ADDR prev_sp;
- /* Store addresses for registers saved in prologue. */
+ /* Register that is a base for this frame - FP for normal frame, SP for
+ non-FP frames. */
+ int frame_base_reg;
+
+ /* Offset from the previous SP to the current frame base. If GCC uses
+ `SUB SP,SP,offset` to allocate space for local variables, then it will be
+ done after setting up a frame pointer, but it still will be considered
+ part of prologue, therefore SP will be lesser than FP at the end of the
+ prologue analysis. In this case that would be an offset from old SP to a
+ new FP. But in case of non-FP frames, frame base is an SP and thus that
+ would be an offset from old SP to new SP. What is important is that this
+ is an offset from old SP to a known register, so it can be used to find
+ old SP.
+
+ Using FP is preferable, when possible, because SP can change in function
+ body after prologue due to alloca, variadic arguments or other shenanigans.
+ If that is the case in the caller frame, then PREV_SP will point to SP at
+ the moment of function call, but it will be different from SP value at the
+ end of the caller prologue. As a result it will not be possible to
+ reconstruct caller's frame and go past it in the backtrace. Those things
+ are unlikely to happen to FP - FP value at the moment of function call (as
+ stored on stack in callee prologue) is also an FP value at the end of the
+ caller's prologue. */
+
+ LONGEST frame_base_offset;
+
+ /* Store addresses for registers saved in prologue. During prologue analysis
+ GDB stores offsets relatively to "old SP", then after old SP is evaluated,
+ offsets are replaced with absolute addresses. */
struct trad_frame_saved_reg *saved_regs;
};
int arc_debug;
-/* XML target description features. */
-
-static const char core_v2_feature_name[] = "org.gnu.gdb.arc.core.v2";
-static const char
- core_reduced_v2_feature_name[] = "org.gnu.gdb.arc.core-reduced.v2";
-static const char
- core_arcompact_feature_name[] = "org.gnu.gdb.arc.core.arcompact";
-static const char aux_minimal_feature_name[] = "org.gnu.gdb.arc.aux-minimal";
-
-/* XML target description known registers. */
-
-static const char *const core_v2_register_names[] = {
- "r0", "r1", "r2", "r3",
- "r4", "r5", "r6", "r7",
- "r8", "r9", "r10", "r11",
- "r12", "r13", "r14", "r15",
- "r16", "r17", "r18", "r19",
- "r20", "r21", "r22", "r23",
- "r24", "r25", "gp", "fp",
- "sp", "ilink", "r30", "blink",
- "r32", "r33", "r34", "r35",
- "r36", "r37", "r38", "r39",
- "r40", "r41", "r42", "r43",
- "r44", "r45", "r46", "r47",
- "r48", "r49", "r50", "r51",
- "r52", "r53", "r54", "r55",
- "r56", "r57", "accl", "acch",
- "lp_count", "pcl",
+/* List of "maintenance print arc" commands. */
+
+static struct cmd_list_element *maintenance_print_arc_list = NULL;
+
+/* A set of registers that we expect to find in a tdesc_feature. These
+ are used in ARC_TDESC_INIT when processing the target description. */
+
+struct arc_register_feature
+{
+ /* Information for a single register. */
+ struct register_info
+ {
+ /* The GDB register number for this register. */
+ int regnum;
+
+ /* List of names for this register. The first name in this list is the
+ preferred name, the name GDB will use when describing this register. */
+ std::vector<const char *> names;
+
+ /* When true, this register must be present in this feature set. */
+ bool required_p;
+ };
+
+ /* The name for this feature. This is the name used to find this feature
+ within the target description. */
+ const char *name;
+
+ /* List of all the registers that we expect to encounter in this register
+ set. */
+ std::vector<struct register_info> registers;
+};
+
+/* Obsolete feature names for backward compatibility. */
+static const char *ARC_CORE_V1_OBSOLETE_FEATURE_NAME
+ = "org.gnu.gdb.arc.core.arcompact";
+static const char *ARC_CORE_V2_OBSOLETE_FEATURE_NAME
+ = "org.gnu.gdb.arc.core.v2";
+static const char *ARC_CORE_V2_REDUCED_OBSOLETE_FEATURE_NAME
+ = "org.gnu.gdb.arc.core-reduced.v2";
+static const char *ARC_AUX_OBSOLETE_FEATURE_NAME
+ = "org.gnu.gdb.arc.aux-minimal";
+/* Modern feature names. */
+static const char *ARC_CORE_FEATURE_NAME = "org.gnu.gdb.arc.core";
+static const char *ARC_AUX_FEATURE_NAME = "org.gnu.gdb.arc.aux";
+
+/* ARCv1 (ARC600, ARC601, ARC700) general core registers feature set.
+ See also arc_update_acc_reg_names() for "accl/acch" names. */
+
+static struct arc_register_feature arc_v1_core_reg_feature =
+{
+ ARC_CORE_FEATURE_NAME,
+ {
+ { ARC_R0_REGNUM + 0, { "r0" }, true },
+ { ARC_R0_REGNUM + 1, { "r1" }, true },
+ { ARC_R0_REGNUM + 2, { "r2" }, true },
+ { ARC_R0_REGNUM + 3, { "r3" }, true },
+ { ARC_R0_REGNUM + 4, { "r4" }, false },
+ { ARC_R0_REGNUM + 5, { "r5" }, false },
+ { ARC_R0_REGNUM + 6, { "r6" }, false },
+ { ARC_R0_REGNUM + 7, { "r7" }, false },
+ { ARC_R0_REGNUM + 8, { "r8" }, false },
+ { ARC_R0_REGNUM + 9, { "r9" }, false },
+ { ARC_R0_REGNUM + 10, { "r10" }, true },
+ { ARC_R0_REGNUM + 11, { "r11" }, true },
+ { ARC_R0_REGNUM + 12, { "r12" }, true },
+ { ARC_R0_REGNUM + 13, { "r13" }, true },
+ { ARC_R0_REGNUM + 14, { "r14" }, true },
+ { ARC_R0_REGNUM + 15, { "r15" }, true },
+ { ARC_R0_REGNUM + 16, { "r16" }, false },
+ { ARC_R0_REGNUM + 17, { "r17" }, false },
+ { ARC_R0_REGNUM + 18, { "r18" }, false },
+ { ARC_R0_REGNUM + 19, { "r19" }, false },
+ { ARC_R0_REGNUM + 20, { "r20" }, false },
+ { ARC_R0_REGNUM + 21, { "r21" }, false },
+ { ARC_R0_REGNUM + 22, { "r22" }, false },
+ { ARC_R0_REGNUM + 23, { "r23" }, false },
+ { ARC_R0_REGNUM + 24, { "r24" }, false },
+ { ARC_R0_REGNUM + 25, { "r25" }, false },
+ { ARC_R0_REGNUM + 26, { "gp" }, true },
+ { ARC_R0_REGNUM + 27, { "fp" }, true },
+ { ARC_R0_REGNUM + 28, { "sp" }, true },
+ { ARC_R0_REGNUM + 29, { "ilink1" }, false },
+ { ARC_R0_REGNUM + 30, { "ilink2" }, false },
+ { ARC_R0_REGNUM + 31, { "blink" }, true },
+ { ARC_R0_REGNUM + 32, { "r32" }, false },
+ { ARC_R0_REGNUM + 33, { "r33" }, false },
+ { ARC_R0_REGNUM + 34, { "r34" }, false },
+ { ARC_R0_REGNUM + 35, { "r35" }, false },
+ { ARC_R0_REGNUM + 36, { "r36" }, false },
+ { ARC_R0_REGNUM + 37, { "r37" }, false },
+ { ARC_R0_REGNUM + 38, { "r38" }, false },
+ { ARC_R0_REGNUM + 39, { "r39" }, false },
+ { ARC_R0_REGNUM + 40, { "r40" }, false },
+ { ARC_R0_REGNUM + 41, { "r41" }, false },
+ { ARC_R0_REGNUM + 42, { "r42" }, false },
+ { ARC_R0_REGNUM + 43, { "r43" }, false },
+ { ARC_R0_REGNUM + 44, { "r44" }, false },
+ { ARC_R0_REGNUM + 45, { "r45" }, false },
+ { ARC_R0_REGNUM + 46, { "r46" }, false },
+ { ARC_R0_REGNUM + 47, { "r47" }, false },
+ { ARC_R0_REGNUM + 48, { "r48" }, false },
+ { ARC_R0_REGNUM + 49, { "r49" }, false },
+ { ARC_R0_REGNUM + 50, { "r50" }, false },
+ { ARC_R0_REGNUM + 51, { "r51" }, false },
+ { ARC_R0_REGNUM + 52, { "r52" }, false },
+ { ARC_R0_REGNUM + 53, { "r53" }, false },
+ { ARC_R0_REGNUM + 54, { "r54" }, false },
+ { ARC_R0_REGNUM + 55, { "r55" }, false },
+ { ARC_R0_REGNUM + 56, { "r56" }, false },
+ { ARC_R0_REGNUM + 57, { "r57" }, false },
+ { ARC_R0_REGNUM + 58, { "r58", "accl" }, false },
+ { ARC_R0_REGNUM + 59, { "r59", "acch" }, false },
+ { ARC_R0_REGNUM + 60, { "lp_count" }, false },
+ { ARC_R0_REGNUM + 61, { "reserved" }, false },
+ { ARC_R0_REGNUM + 62, { "limm" }, false },
+ { ARC_R0_REGNUM + 63, { "pcl" }, true }
+ }
};
-static const char *const aux_minimal_register_names[] = {
- "pc", "status32",
+/* ARCv2 (ARCHS) general core registers feature set. See also
+ arc_update_acc_reg_names() for "accl/acch" names. */
+
+static struct arc_register_feature arc_v2_core_reg_feature =
+{
+ ARC_CORE_FEATURE_NAME,
+ {
+ { ARC_R0_REGNUM + 0, { "r0" }, true },
+ { ARC_R0_REGNUM + 1, { "r1" }, true },
+ { ARC_R0_REGNUM + 2, { "r2" }, true },
+ { ARC_R0_REGNUM + 3, { "r3" }, true },
+ { ARC_R0_REGNUM + 4, { "r4" }, false },
+ { ARC_R0_REGNUM + 5, { "r5" }, false },
+ { ARC_R0_REGNUM + 6, { "r6" }, false },
+ { ARC_R0_REGNUM + 7, { "r7" }, false },
+ { ARC_R0_REGNUM + 8, { "r8" }, false },
+ { ARC_R0_REGNUM + 9, { "r9" }, false },
+ { ARC_R0_REGNUM + 10, { "r10" }, true },
+ { ARC_R0_REGNUM + 11, { "r11" }, true },
+ { ARC_R0_REGNUM + 12, { "r12" }, true },
+ { ARC_R0_REGNUM + 13, { "r13" }, true },
+ { ARC_R0_REGNUM + 14, { "r14" }, true },
+ { ARC_R0_REGNUM + 15, { "r15" }, true },
+ { ARC_R0_REGNUM + 16, { "r16" }, false },
+ { ARC_R0_REGNUM + 17, { "r17" }, false },
+ { ARC_R0_REGNUM + 18, { "r18" }, false },
+ { ARC_R0_REGNUM + 19, { "r19" }, false },
+ { ARC_R0_REGNUM + 20, { "r20" }, false },
+ { ARC_R0_REGNUM + 21, { "r21" }, false },
+ { ARC_R0_REGNUM + 22, { "r22" }, false },
+ { ARC_R0_REGNUM + 23, { "r23" }, false },
+ { ARC_R0_REGNUM + 24, { "r24" }, false },
+ { ARC_R0_REGNUM + 25, { "r25" }, false },
+ { ARC_R0_REGNUM + 26, { "gp" }, true },
+ { ARC_R0_REGNUM + 27, { "fp" }, true },
+ { ARC_R0_REGNUM + 28, { "sp" }, true },
+ { ARC_R0_REGNUM + 29, { "ilink" }, false },
+ { ARC_R0_REGNUM + 30, { "r30" }, true },
+ { ARC_R0_REGNUM + 31, { "blink" }, true },
+ { ARC_R0_REGNUM + 32, { "r32" }, false },
+ { ARC_R0_REGNUM + 33, { "r33" }, false },
+ { ARC_R0_REGNUM + 34, { "r34" }, false },
+ { ARC_R0_REGNUM + 35, { "r35" }, false },
+ { ARC_R0_REGNUM + 36, { "r36" }, false },
+ { ARC_R0_REGNUM + 37, { "r37" }, false },
+ { ARC_R0_REGNUM + 38, { "r38" }, false },
+ { ARC_R0_REGNUM + 39, { "r39" }, false },
+ { ARC_R0_REGNUM + 40, { "r40" }, false },
+ { ARC_R0_REGNUM + 41, { "r41" }, false },
+ { ARC_R0_REGNUM + 42, { "r42" }, false },
+ { ARC_R0_REGNUM + 43, { "r43" }, false },
+ { ARC_R0_REGNUM + 44, { "r44" }, false },
+ { ARC_R0_REGNUM + 45, { "r45" }, false },
+ { ARC_R0_REGNUM + 46, { "r46" }, false },
+ { ARC_R0_REGNUM + 47, { "r47" }, false },
+ { ARC_R0_REGNUM + 48, { "r48" }, false },
+ { ARC_R0_REGNUM + 49, { "r49" }, false },
+ { ARC_R0_REGNUM + 50, { "r50" }, false },
+ { ARC_R0_REGNUM + 51, { "r51" }, false },
+ { ARC_R0_REGNUM + 52, { "r52" }, false },
+ { ARC_R0_REGNUM + 53, { "r53" }, false },
+ { ARC_R0_REGNUM + 54, { "r54" }, false },
+ { ARC_R0_REGNUM + 55, { "r55" }, false },
+ { ARC_R0_REGNUM + 56, { "r56" }, false },
+ { ARC_R0_REGNUM + 57, { "r57" }, false },
+ { ARC_R0_REGNUM + 58, { "r58", "accl" }, false },
+ { ARC_R0_REGNUM + 59, { "r59", "acch" }, false },
+ { ARC_R0_REGNUM + 60, { "lp_count" }, false },
+ { ARC_R0_REGNUM + 61, { "reserved" }, false },
+ { ARC_R0_REGNUM + 62, { "limm" }, false },
+ { ARC_R0_REGNUM + 63, { "pcl" }, true }
+ }
};
-static const char *const core_arcompact_register_names[] = {
- "r0", "r1", "r2", "r3",
- "r4", "r5", "r6", "r7",
- "r8", "r9", "r10", "r11",
- "r12", "r13", "r14", "r15",
- "r16", "r17", "r18", "r19",
- "r20", "r21", "r22", "r23",
- "r24", "r25", "gp", "fp",
- "sp", "ilink1", "ilink2", "blink",
- "r32", "r33", "r34", "r35",
- "r36", "r37", "r38", "r39",
- "r40", "r41", "r42", "r43",
- "r44", "r45", "r46", "r47",
- "r48", "r49", "r50", "r51",
- "r52", "r53", "r54", "r55",
- "r56", "r57", "r58", "r59",
- "lp_count", "pcl",
+/* The common auxiliary registers feature set. The REGNUM field
+ must match the ARC_REGNUM enum in arc-tdep.h. */
+
+static const struct arc_register_feature arc_common_aux_reg_feature =
+{
+ ARC_AUX_FEATURE_NAME,
+ {
+ { ARC_FIRST_AUX_REGNUM + 0, { "pc" }, true },
+ { ARC_FIRST_AUX_REGNUM + 1, { "status32" }, true },
+ { ARC_FIRST_AUX_REGNUM + 2, { "lp_start" }, false },
+ { ARC_FIRST_AUX_REGNUM + 3, { "lp_end" }, false },
+ { ARC_FIRST_AUX_REGNUM + 4, { "bta" }, false }
+ }
};
+static char *arc_disassembler_options = NULL;
+
+/* Functions are sorted in the order as they are used in the
+ _initialize_arc_tdep (), which uses the same order as gdbarch.h. Static
+ functions are defined before the first invocation. */
+
+/* Returns an unsigned value of OPERAND_NUM in instruction INSN.
+ For relative branch instructions returned value is an offset, not an actual
+ branch target. */
+
+static ULONGEST
+arc_insn_get_operand_value (const struct arc_instruction &insn,
+ unsigned int operand_num)
+{
+ switch (insn.operands[operand_num].kind)
+ {
+ case ARC_OPERAND_KIND_LIMM:
+ gdb_assert (insn.limm_p);
+ return insn.limm_value;
+ case ARC_OPERAND_KIND_SHIMM:
+ return insn.operands[operand_num].value;
+ default:
+ /* Value in instruction is a register number. */
+ struct regcache *regcache = get_current_regcache ();
+ ULONGEST value;
+ regcache_cooked_read_unsigned (regcache,
+ insn.operands[operand_num].value,
+ &value);
+ return value;
+ }
+}
+
+/* Like arc_insn_get_operand_value, but returns a signed value. */
+
+static LONGEST
+arc_insn_get_operand_value_signed (const struct arc_instruction &insn,
+ unsigned int operand_num)
+{
+ switch (insn.operands[operand_num].kind)
+ {
+ case ARC_OPERAND_KIND_LIMM:
+ gdb_assert (insn.limm_p);
+ /* Convert unsigned raw value to signed one. This assumes 2's
+ complement arithmetic, but so is the LONG_MIN value from generic
+ defs.h and that assumption is true for ARC. */
+ gdb_static_assert (sizeof (insn.limm_value) == sizeof (int));
+ return (((LONGEST) insn.limm_value) ^ INT_MIN) - INT_MIN;
+ case ARC_OPERAND_KIND_SHIMM:
+ /* Sign conversion has been done by binutils. */
+ return insn.operands[operand_num].value;
+ default:
+ /* Value in instruction is a register number. */
+ struct regcache *regcache = get_current_regcache ();
+ LONGEST value;
+ regcache_cooked_read_signed (regcache,
+ insn.operands[operand_num].value,
+ &value);
+ return value;
+ }
+}
+
+/* Get register with base address of memory operation. */
+
+static int
+arc_insn_get_memory_base_reg (const struct arc_instruction &insn)
+{
+ /* POP_S and PUSH_S have SP as an implicit argument in a disassembler. */
+ if (insn.insn_class == PUSH || insn.insn_class == POP)
+ return ARC_SP_REGNUM;
+
+ gdb_assert (insn.insn_class == LOAD || insn.insn_class == STORE);
+
+ /* Other instructions all have at least two operands: operand 0 is data,
+ operand 1 is address. Operand 2 is offset from address. However, see
+ comment to arc_instruction.operands - in some cases, third operand may be
+ missing, namely if it is 0. */
+ gdb_assert (insn.operands_count >= 2);
+ return insn.operands[1].value;
+}
+
+/* Get offset of a memory operation INSN. */
+
+static CORE_ADDR
+arc_insn_get_memory_offset (const struct arc_instruction &insn)
+{
+ /* POP_S and PUSH_S have offset as an implicit argument in a
+ disassembler. */
+ if (insn.insn_class == POP)
+ return 4;
+ else if (insn.insn_class == PUSH)
+ return -4;
+
+ gdb_assert (insn.insn_class == LOAD || insn.insn_class == STORE);
+
+ /* Other instructions all have at least two operands: operand 0 is data,
+ operand 1 is address. Operand 2 is offset from address. However, see
+ comment to arc_instruction.operands - in some cases, third operand may be
+ missing, namely if it is 0. */
+ if (insn.operands_count < 3)
+ return 0;
+
+ CORE_ADDR value = arc_insn_get_operand_value (insn, 2);
+ /* Handle scaling. */
+ if (insn.writeback_mode == ARC_WRITEBACK_AS)
+ {
+ /* Byte data size is not valid for AS. Halfword means shift by 1 bit.
+ Word and double word means shift by 2 bits. */
+ gdb_assert (insn.data_size_mode != ARC_SCALING_B);
+ if (insn.data_size_mode == ARC_SCALING_H)
+ value <<= 1;
+ else
+ value <<= 2;
+ }
+ return value;
+}
+
+CORE_ADDR
+arc_insn_get_branch_target (const struct arc_instruction &insn)
+{
+ gdb_assert (insn.is_control_flow);
+
+ /* BI [c]: PC = nextPC + (c << 2). */
+ if (insn.insn_class == BI)
+ {
+ ULONGEST reg_value = arc_insn_get_operand_value (insn, 0);
+ return arc_insn_get_linear_next_pc (insn) + (reg_value << 2);
+ }
+ /* BIH [c]: PC = nextPC + (c << 1). */
+ else if (insn.insn_class == BIH)
+ {
+ ULONGEST reg_value = arc_insn_get_operand_value (insn, 0);
+ return arc_insn_get_linear_next_pc (insn) + (reg_value << 1);
+ }
+ /* JLI and EI. */
+ /* JLI and EI depend on optional AUX registers. Not supported right now. */
+ else if (insn.insn_class == JLI)
+ {
+ fprintf_unfiltered (gdb_stderr,
+ "JLI_S instruction is not supported by the GDB.");
+ return 0;
+ }
+ else if (insn.insn_class == EI)
+ {
+ fprintf_unfiltered (gdb_stderr,
+ "EI_S instruction is not supported by the GDB.");
+ return 0;
+ }
+ /* LEAVE_S: PC = BLINK. */
+ else if (insn.insn_class == LEAVE)
+ {
+ struct regcache *regcache = get_current_regcache ();
+ ULONGEST value;
+ regcache_cooked_read_unsigned (regcache, ARC_BLINK_REGNUM, &value);
+ return value;
+ }
+ /* BBIT0/1, BRcc: PC = currentPC + operand. */
+ else if (insn.insn_class == BBIT0 || insn.insn_class == BBIT1
+ || insn.insn_class == BRCC)
+ {
+ /* Most instructions has branch target as their sole argument. However
+ conditional brcc/bbit has it as a third operand. */
+ CORE_ADDR pcrel_addr = arc_insn_get_operand_value (insn, 2);
+
+ /* Offset is relative to the 4-byte aligned address of the current
+ instruction, hence last two bits should be truncated. */
+ return pcrel_addr + align_down (insn.address, 4);
+ }
+ /* B, Bcc, BL, BLcc, LP, LPcc: PC = currentPC + operand. */
+ else if (insn.insn_class == BRANCH || insn.insn_class == LOOP)
+ {
+ CORE_ADDR pcrel_addr = arc_insn_get_operand_value (insn, 0);
+
+ /* Offset is relative to the 4-byte aligned address of the current
+ instruction, hence last two bits should be truncated. */
+ return pcrel_addr + align_down (insn.address, 4);
+ }
+ /* J, Jcc, JL, JLcc: PC = operand. */
+ else if (insn.insn_class == JUMP)
+ {
+ /* All jumps are single-operand. */
+ return arc_insn_get_operand_value (insn, 0);
+ }
+
+ /* This is some new and unknown instruction. */
+ gdb_assert_not_reached ("Unknown branch instruction.");
+}
+
+/* Dump INSN into gdb_stdlog. */
+
+static void
+arc_insn_dump (const struct arc_instruction &insn)
+{
+ struct gdbarch *gdbarch = target_gdbarch ();
+
+ arc_print ("Dumping arc_instruction at %s\n",
+ paddress (gdbarch, insn.address));
+ arc_print ("\tlength = %u\n", insn.length);
+
+ if (!insn.valid)
+ {
+ arc_print ("\tThis is not a valid ARC instruction.\n");
+ return;
+ }
+
+ arc_print ("\tlength_with_limm = %u\n", insn.length + (insn.limm_p ? 4 : 0));
+ arc_print ("\tcc = 0x%x\n", insn.condition_code);
+ arc_print ("\tinsn_class = %u\n", insn.insn_class);
+ arc_print ("\tis_control_flow = %i\n", insn.is_control_flow);
+ arc_print ("\thas_delay_slot = %i\n", insn.has_delay_slot);
+
+ CORE_ADDR next_pc = arc_insn_get_linear_next_pc (insn);
+ arc_print ("\tlinear_next_pc = %s\n", paddress (gdbarch, next_pc));
+
+ if (insn.is_control_flow)
+ {
+ CORE_ADDR t = arc_insn_get_branch_target (insn);
+ arc_print ("\tbranch_target = %s\n", paddress (gdbarch, t));
+ }
+
+ arc_print ("\tlimm_p = %i\n", insn.limm_p);
+ if (insn.limm_p)
+ arc_print ("\tlimm_value = 0x%08x\n", insn.limm_value);
+
+ if (insn.insn_class == STORE || insn.insn_class == LOAD
+ || insn.insn_class == PUSH || insn.insn_class == POP)
+ {
+ arc_print ("\twriteback_mode = %u\n", insn.writeback_mode);
+ arc_print ("\tdata_size_mode = %u\n", insn.data_size_mode);
+ arc_print ("\tmemory_base_register = %s\n",
+ gdbarch_register_name (gdbarch,
+ arc_insn_get_memory_base_reg (insn)));
+ /* get_memory_offset returns an unsigned CORE_ADDR, but treat it as a
+ LONGEST for a nicer representation. */
+ arc_print ("\taddr_offset = %s\n",
+ plongest (arc_insn_get_memory_offset (insn)));
+ }
+
+ arc_print ("\toperands_count = %u\n", insn.operands_count);
+ for (unsigned int i = 0; i < insn.operands_count; ++i)
+ {
+ int is_reg = (insn.operands[i].kind == ARC_OPERAND_KIND_REG);
+
+ arc_print ("\toperand[%u] = {\n", i);
+ arc_print ("\t\tis_reg = %i\n", is_reg);
+ if (is_reg)
+ arc_print ("\t\tregister = %s\n",
+ gdbarch_register_name (gdbarch, insn.operands[i].value));
+ /* Don't know if this value is signed or not, so print both
+ representations. This tends to look quite ugly, especially for big
+ numbers. */
+ arc_print ("\t\tunsigned value = %s\n",
+ pulongest (arc_insn_get_operand_value (insn, i)));
+ arc_print ("\t\tsigned value = %s\n",
+ plongest (arc_insn_get_operand_value_signed (insn, i)));
+ arc_print ("\t}\n");
+ }
+}
+
+CORE_ADDR
+arc_insn_get_linear_next_pc (const struct arc_instruction &insn)
+{
+ /* In ARC long immediate is always 4 bytes. */
+ return (insn.address + insn.length + (insn.limm_p ? 4 : 0));
+}
+
/* Implement the "write_pc" gdbarch method.
In ARC PC register is a normal register so in most cases setting PC value
static void
arc_write_pc (struct regcache *regcache, CORE_ADDR new_pc)
{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct gdbarch *gdbarch = regcache->arch ();
if (arc_debug)
debug_printf ("arc: Writing PC, new value=%s\n",
regcache_cooked_read_unsigned (regcache, gdbarch_ps_regnum (gdbarch),
&status32);
- /* Mask for DE bit is 0x40. */
- if (status32 & 0x40)
+ if ((status32 & ARC_STATUS32_DE_MASK) != 0)
{
if (arc_debug)
{
*offset_ptr = 0;
}
-/* Implement the "dummy_id" gdbarch method.
-
- Tear down a dummy frame created by arc_push_dummy_call (). This data has
- to be constructed manually from the data in our hand. The stack pointer
- and program counter can be obtained from the frame info. */
-
-static struct frame_id
-arc_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
-{
- return frame_id_build (get_frame_sp (this_frame),
- get_frame_pc (this_frame));
-}
-
/* Implement the "push_dummy_call" gdbarch method.
Stack Frame Layout
The stack grows downward, so SP points below FP in memory; SP always
points to the last used word on the stack, not the first one.
- | | |
- | arg word N | | caller's
- | : | | frame
- | arg word 10 | |
- | arg word 9 | |
- old SP ---> +-----------------------+ --+
- | | |
- | callee-saved | |
- | registers | |
- | including fp, blink | |
- | | | callee's
- new FP ---> +-----------------------+ | frame
- | | |
- | local | |
- | variables | |
- | | |
- | register | |
- | spill area | |
- | | |
- | outgoing args | |
- | | |
- new SP ---> +-----------------------+ --+
- | |
- | unused |
- | |
- |
- |
- V
- downwards
+ | | |
+ | arg word N | | caller's
+ | : | | frame
+ | arg word 10 | |
+ | arg word 9 | |
+ old SP ---> +-----------------------+ --+
+ | | |
+ | callee-saved | |
+ | registers | |
+ | including fp, blink | |
+ | | | callee's
+ new FP ---> +-----------------------+ | frame
+ | | |
+ | local | |
+ | variables | |
+ | | |
+ | register | |
+ | spill area | |
+ | | |
+ | outgoing args | |
+ | | |
+ new SP ---> +-----------------------+ --+
+ | |
+ | unused |
+ | |
+ |
+ |
+ V
+ downwards
The list of arguments to be passed to a function is considered to be a
sequence of _N_ words (as though all the parameters were stored in order in
static CORE_ADDR
arc_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
- struct value **args, CORE_ADDR sp, int struct_return,
+ struct value **args, CORE_ADDR sp,
+ function_call_return_method return_method,
CORE_ADDR struct_addr)
{
if (arc_debug)
value return? If so, struct_addr is the address of the reserved space for
the return structure to be written on the stack, and that address is
passed to that function as a hidden first argument. */
- if (struct_return)
+ if (return_method == return_method_struct)
{
/* Pass the return address in the first argument register. */
regcache_cooked_write_unsigned (regcache, arg_reg, struct_addr);
/* Note we don't use write_unsigned here, since that would convert
the byte order, but we are already in the correct byte order. */
- regcache_cooked_write (regcache, arg_reg, data);
+ regcache->cooked_write (arg_reg, data);
data += ARC_REGISTER_SIZE;
total_space -= ARC_REGISTER_SIZE;
static int
arc_cannot_fetch_register (struct gdbarch *gdbarch, int regnum)
{
- /* Assume that register is readable if it is unknown. */
- return FALSE;
+ /* Assume that register is readable if it is unknown. LIMM and RESERVED are
+ not real registers, but specific register numbers. They are available as
+ regnums to align architectural register numbers with GDB internal regnums,
+ but they shouldn't appear in target descriptions generated by
+ GDB-servers. */
+ switch (regnum)
+ {
+ case ARC_RESERVED_REGNUM:
+ case ARC_LIMM_REGNUM:
+ return true;
+ default:
+ return false;
+ }
}
/* Implement the "cannot_store_register" gdbarch method. */
static int
arc_cannot_store_register (struct gdbarch *gdbarch, int regnum)
{
- /* Assume that register is writable if it is unknown. */
+ /* Assume that register is writable if it is unknown. See comment in
+ arc_cannot_fetch_register about LIMM and RESERVED. */
switch (regnum)
{
+ case ARC_RESERVED_REGNUM:
+ case ARC_LIMM_REGNUM:
case ARC_PCL_REGNUM:
- return TRUE;
+ return true;
default:
- return FALSE;
+ return false;
}
}
function passes a hidden first parameter to the callee (in R0). That
parameter is the address at which the value being returned should be
stored. Otherwise, the result is returned in registers. */
- int is_struct_return = (TYPE_CODE (valtype) == TYPE_CODE_STRUCT
- || TYPE_CODE (valtype) == TYPE_CODE_UNION
+ int is_struct_return = (valtype->code () == TYPE_CODE_STRUCT
+ || valtype->code () == TYPE_CODE_UNION
|| TYPE_LENGTH (valtype) > 2 * ARC_REGISTER_SIZE);
if (arc_debug)
return (CORE_ADDR) get_frame_register_unsigned (this_frame, ARC_FP_REGNUM);
}
+/* Helper function that returns valid pv_t for an instruction operand:
+ either a register or a constant. */
+
+static pv_t
+arc_pv_get_operand (pv_t *regs, const struct arc_instruction &insn, int operand)
+{
+ if (insn.operands[operand].kind == ARC_OPERAND_KIND_REG)
+ return regs[insn.operands[operand].value];
+ else
+ return pv_constant (arc_insn_get_operand_value (insn, operand));
+}
+
+/* Determine whether the given disassembled instruction may be part of a
+ function prologue. If it is, the information in the frame unwind cache will
+ be updated. */
+
+static bool
+arc_is_in_prologue (struct gdbarch *gdbarch, const struct arc_instruction &insn,
+ pv_t *regs, struct pv_area *stack)
+{
+ /* It might be that currently analyzed address doesn't contain an
+ instruction, hence INSN is not valid. It likely means that address points
+ to a data, non-initialized memory, or middle of a 32-bit instruction. In
+ practice this may happen if GDB connects to a remote target that has
+ non-zeroed memory. GDB would read PC value and would try to analyze
+ prologue, but there is no guarantee that memory contents at the address
+ specified in PC is address is a valid instruction. There is not much that
+ that can be done about that. */
+ if (!insn.valid)
+ return false;
+
+ /* Branch/jump or a predicated instruction. */
+ if (insn.is_control_flow || insn.condition_code != ARC_CC_AL)
+ return false;
+
+ /* Store of some register. May or may not update base address register. */
+ if (insn.insn_class == STORE || insn.insn_class == PUSH)
+ {
+ /* There is definitely at least one operand - register/value being
+ stored. */
+ gdb_assert (insn.operands_count > 0);
+
+ /* Store at some constant address. */
+ if (insn.operands_count > 1
+ && insn.operands[1].kind != ARC_OPERAND_KIND_REG)
+ return false;
+
+ /* Writeback modes:
+ Mode Address used Writeback value
+ --------------------------------------------------
+ No reg + offset no
+ A/AW reg + offset reg + offset
+ AB reg reg + offset
+ AS reg + (offset << scaling) no
+
+ "PUSH reg" is an alias to "ST.AW reg, [SP, -4]" encoding. However
+ 16-bit PUSH_S is a distinct instruction encoding, where offset and
+ base register are implied through opcode. */
+
+ /* Register with base memory address. */
+ int base_reg = arc_insn_get_memory_base_reg (insn);
+
+ /* Address where to write. arc_insn_get_memory_offset returns scaled
+ value for ARC_WRITEBACK_AS. */
+ pv_t addr;
+ if (insn.writeback_mode == ARC_WRITEBACK_AB)
+ addr = regs[base_reg];
+ else
+ addr = pv_add_constant (regs[base_reg],
+ arc_insn_get_memory_offset (insn));
+
+ if (stack->store_would_trash (addr))
+ return false;
+
+ if (insn.data_size_mode != ARC_SCALING_D)
+ {
+ /* Find the value being stored. */
+ pv_t store_value = arc_pv_get_operand (regs, insn, 0);
+
+ /* What is the size of a the stored value? */
+ CORE_ADDR size;
+ if (insn.data_size_mode == ARC_SCALING_B)
+ size = 1;
+ else if (insn.data_size_mode == ARC_SCALING_H)
+ size = 2;
+ else
+ size = ARC_REGISTER_SIZE;
+
+ stack->store (addr, size, store_value);
+ }
+ else
+ {
+ if (insn.operands[0].kind == ARC_OPERAND_KIND_REG)
+ {
+ /* If this is a double store, than write N+1 register as well. */
+ pv_t store_value1 = regs[insn.operands[0].value];
+ pv_t store_value2 = regs[insn.operands[0].value + 1];
+ stack->store (addr, ARC_REGISTER_SIZE, store_value1);
+ stack->store (pv_add_constant (addr, ARC_REGISTER_SIZE),
+ ARC_REGISTER_SIZE, store_value2);
+ }
+ else
+ {
+ pv_t store_value
+ = pv_constant (arc_insn_get_operand_value (insn, 0));
+ stack->store (addr, ARC_REGISTER_SIZE * 2, store_value);
+ }
+ }
+
+ /* Is base register updated? */
+ if (insn.writeback_mode == ARC_WRITEBACK_A
+ || insn.writeback_mode == ARC_WRITEBACK_AB)
+ regs[base_reg] = pv_add_constant (regs[base_reg],
+ arc_insn_get_memory_offset (insn));
+
+ return true;
+ }
+ else if (insn.insn_class == MOVE)
+ {
+ gdb_assert (insn.operands_count == 2);
+
+ /* Destination argument can be "0", so nothing will happen. */
+ if (insn.operands[0].kind == ARC_OPERAND_KIND_REG)
+ {
+ int dst_regnum = insn.operands[0].value;
+ regs[dst_regnum] = arc_pv_get_operand (regs, insn, 1);
+ }
+ return true;
+ }
+ else if (insn.insn_class == SUB)
+ {
+ gdb_assert (insn.operands_count == 3);
+
+ /* SUB 0,b,c. */
+ if (insn.operands[0].kind != ARC_OPERAND_KIND_REG)
+ return true;
+
+ int dst_regnum = insn.operands[0].value;
+ regs[dst_regnum] = pv_subtract (arc_pv_get_operand (regs, insn, 1),
+ arc_pv_get_operand (regs, insn, 2));
+ return true;
+ }
+ else if (insn.insn_class == ENTER)
+ {
+ /* ENTER_S is a prologue-in-instruction - it saves all callee-saved
+ registers according to given arguments thus greatly reducing code
+ size. Which registers will be actually saved depends on arguments.
+
+ ENTER_S {R13-...,FP,BLINK} stores registers in following order:
+
+ new SP ->
+ BLINK
+ R13
+ R14
+ R15
+ ...
+ FP
+ old SP ->
+
+ There are up to three arguments for this opcode, as presented by ARC
+ disassembler:
+ 1) amount of general-purpose registers to be saved - this argument is
+ always present even when it is 0;
+ 2) FP register number (27) if FP has to be stored, otherwise argument
+ is not present;
+ 3) BLINK register number (31) if BLINK has to be stored, otherwise
+ argument is not present. If both FP and BLINK are stored, then FP
+ is present before BLINK in argument list. */
+ gdb_assert (insn.operands_count > 0);
+
+ int regs_saved = arc_insn_get_operand_value (insn, 0);
+
+ bool is_fp_saved;
+ if (insn.operands_count > 1)
+ is_fp_saved = (insn.operands[1].value == ARC_FP_REGNUM);
+ else
+ is_fp_saved = false;
+
+ bool is_blink_saved;
+ if (insn.operands_count > 1)
+ is_blink_saved = (insn.operands[insn.operands_count - 1].value
+ == ARC_BLINK_REGNUM);
+ else
+ is_blink_saved = false;
+
+ /* Amount of bytes to be allocated to store specified registers. */
+ CORE_ADDR st_size = ((regs_saved + is_fp_saved + is_blink_saved)
+ * ARC_REGISTER_SIZE);
+ pv_t new_sp = pv_add_constant (regs[ARC_SP_REGNUM], -st_size);
+
+ /* Assume that if the last register (closest to new SP) can be written,
+ then it is possible to write all of them. */
+ if (stack->store_would_trash (new_sp))
+ return false;
+
+ /* Current store address. */
+ pv_t addr = regs[ARC_SP_REGNUM];
+
+ if (is_fp_saved)
+ {
+ addr = pv_add_constant (addr, -ARC_REGISTER_SIZE);
+ stack->store (addr, ARC_REGISTER_SIZE, regs[ARC_FP_REGNUM]);
+ }
+
+ /* Registers are stored in backward order: from GP (R26) to R13. */
+ for (int i = ARC_R13_REGNUM + regs_saved - 1; i >= ARC_R13_REGNUM; i--)
+ {
+ addr = pv_add_constant (addr, -ARC_REGISTER_SIZE);
+ stack->store (addr, ARC_REGISTER_SIZE, regs[i]);
+ }
+
+ if (is_blink_saved)
+ {
+ addr = pv_add_constant (addr, -ARC_REGISTER_SIZE);
+ stack->store (addr, ARC_REGISTER_SIZE,
+ regs[ARC_BLINK_REGNUM]);
+ }
+
+ gdb_assert (pv_is_identical (addr, new_sp));
+
+ regs[ARC_SP_REGNUM] = new_sp;
+
+ if (is_fp_saved)
+ regs[ARC_FP_REGNUM] = regs[ARC_SP_REGNUM];
+
+ return true;
+ }
+
+ /* Some other architectures, like nds32 or arm, try to continue as far as
+ possible when building a prologue cache (as opposed to when skipping
+ prologue), so that cache will be as full as possible. However current
+ code for ARC doesn't recognize some instructions that may modify SP, like
+ ADD, AND, OR, etc, hence there is no way to guarantee that SP wasn't
+ clobbered by the skipped instruction. Potential existence of extension
+ instruction, which may do anything they want makes this even more complex,
+ so it is just better to halt on a first unrecognized instruction. */
+
+ return false;
+}
+
+/* Copy of gdb_buffered_insn_length_fprintf from disasm.c. */
+
+static int ATTRIBUTE_PRINTF (2, 3)
+arc_fprintf_disasm (void *stream, const char *format, ...)
+{
+ return 0;
+}
+
+struct disassemble_info
+arc_disassemble_info (struct gdbarch *gdbarch)
+{
+ struct disassemble_info di;
+ init_disassemble_info (&di, &null_stream, arc_fprintf_disasm);
+ di.arch = gdbarch_bfd_arch_info (gdbarch)->arch;
+ di.mach = gdbarch_bfd_arch_info (gdbarch)->mach;
+ di.endian = gdbarch_byte_order (gdbarch);
+ di.read_memory_func = [](bfd_vma memaddr, gdb_byte *myaddr,
+ unsigned int len, struct disassemble_info *info)
+ {
+ return target_read_code (memaddr, myaddr, len);
+ };
+ return di;
+}
+
+/* Analyze the prologue and update the corresponding frame cache for the frame
+ unwinder for unwinding frames that doesn't have debug info. In such
+ situation GDB attempts to parse instructions in the prologue to understand
+ where each register is saved.
+
+ If CACHE is not NULL, then it will be filled with information about saved
+ registers.
+
+ There are several variations of prologue which GDB may encounter. "Full"
+ prologue looks like this:
+
+ sub sp,sp,<imm> ; Space for variadic arguments.
+ push blink ; Store return address.
+ push r13 ; Store callee saved registers (up to R26/GP).
+ push r14
+ push fp ; Store frame pointer.
+ mov fp,sp ; Update frame pointer.
+ sub sp,sp,<imm> ; Create space for local vars on the stack.
+
+ Depending on compiler options lots of things may change:
+
+ 1) BLINK is not saved in leaf functions.
+ 2) Frame pointer is not saved and updated if -fomit-frame-pointer is used.
+ 3) 16-bit versions of those instructions may be used.
+ 4) Instead of a sequence of several push'es, compiler may instead prefer to
+ do one subtract on stack pointer and then store registers using normal
+ store, that doesn't update SP. Like this:
+
+
+ sub sp,sp,8 ; Create space for callee-saved registers.
+ st r13,[sp,4] ; Store callee saved registers (up to R26/GP).
+ st r14,[sp,0]
+
+ 5) ENTER_S instruction can encode most of prologue sequence in one
+ instruction (except for those subtracts for variadic arguments and local
+ variables).
+ 6) GCC may use "millicode" functions from libgcc to store callee-saved
+ registers with minimal code-size requirements. This function currently
+ doesn't support this.
+
+ ENTRYPOINT is a function entry point where prologue starts.
+
+ LIMIT_PC is a maximum possible end address of prologue (meaning address
+ of first instruction after the prologue). It might also point to the middle
+ of prologue if execution has been stopped by the breakpoint at this address
+ - in this case debugger should analyze prologue only up to this address,
+ because further instructions haven't been executed yet.
+
+ Returns address of the first instruction after the prologue. */
+
+static CORE_ADDR
+arc_analyze_prologue (struct gdbarch *gdbarch, const CORE_ADDR entrypoint,
+ const CORE_ADDR limit_pc, struct arc_frame_cache *cache)
+{
+ if (arc_debug)
+ debug_printf ("arc: analyze_prologue (entrypoint=%s, limit_pc=%s)\n",
+ paddress (gdbarch, entrypoint),
+ paddress (gdbarch, limit_pc));
+
+ /* Prologue values. Only core registers can be stored. */
+ pv_t regs[ARC_LAST_CORE_REGNUM + 1];
+ for (int i = 0; i <= ARC_LAST_CORE_REGNUM; i++)
+ regs[i] = pv_register (i, 0);
+ pv_area stack (ARC_SP_REGNUM, gdbarch_addr_bit (gdbarch));
+
+ CORE_ADDR current_prologue_end = entrypoint;
+
+ /* Look at each instruction in the prologue. */
+ while (current_prologue_end < limit_pc)
+ {
+ struct arc_instruction insn;
+ struct disassemble_info di = arc_disassemble_info (gdbarch);
+ arc_insn_decode (current_prologue_end, &di, arc_delayed_print_insn,
+ &insn);
+
+ if (arc_debug >= 2)
+ arc_insn_dump (insn);
+
+ /* If this instruction is in the prologue, fields in the cache will be
+ updated, and the saved registers mask may be updated. */
+ if (!arc_is_in_prologue (gdbarch, insn, regs, &stack))
+ {
+ /* Found an instruction that is not in the prologue. */
+ if (arc_debug)
+ debug_printf ("arc: End of prologue reached at address %s\n",
+ paddress (gdbarch, insn.address));
+ break;
+ }
+
+ current_prologue_end = arc_insn_get_linear_next_pc (insn);
+ }
+
+ if (cache != NULL)
+ {
+ /* Figure out if it is a frame pointer or just a stack pointer. */
+ if (pv_is_register (regs[ARC_FP_REGNUM], ARC_SP_REGNUM))
+ {
+ cache->frame_base_reg = ARC_FP_REGNUM;
+ cache->frame_base_offset = -regs[ARC_FP_REGNUM].k;
+ }
+ else
+ {
+ cache->frame_base_reg = ARC_SP_REGNUM;
+ cache->frame_base_offset = -regs[ARC_SP_REGNUM].k;
+ }
+
+ /* Assign offset from old SP to all saved registers. */
+ for (int i = 0; i <= ARC_LAST_CORE_REGNUM; i++)
+ {
+ CORE_ADDR offset;
+ if (stack.find_reg (gdbarch, i, &offset))
+ cache->saved_regs[i].addr = offset;
+ }
+ }
+
+ return current_prologue_end;
+}
+
+/* Estimated maximum prologue length in bytes. This should include:
+ 1) Store instruction for each callee-saved register (R25 - R13 + 1)
+ 2) Two instructions for FP
+ 3) One for BLINK
+ 4) Three substract instructions for SP (for variadic args, for
+ callee saved regs and for local vars) and assuming that those SUB use
+ long-immediate (hence double length).
+ 5) Stores of arguments registers are considered part of prologue too
+ (R7 - R1 + 1).
+ This is quite an extreme case, because even with -O0 GCC will collapse first
+ two SUBs into one and long immediate values are quite unlikely to appear in
+ this case, but still better to overshoot a bit - prologue analysis will
+ anyway stop at the first instruction that doesn't fit prologue, so this
+ limit will be rarely reached. */
+
+const static int MAX_PROLOGUE_LENGTH
+ = 4 * (ARC_R25_REGNUM - ARC_R13_REGNUM + 1 + 2 + 1 + 6
+ + ARC_LAST_ARG_REGNUM - ARC_FIRST_ARG_REGNUM + 1);
+
/* Implement the "skip_prologue" gdbarch method.
Skip the prologue for the function at PC. This is done by checking from
/* No prologue info in symbol table, have to analyze prologue. */
/* Find an upper limit on the function prologue using the debug
- information. If the debug information could not be used to provide that
- bound, then pass 0 and arc_scan_prologue will estimate value itself. */
+ information. If there is no debug information about prologue end, then
+ skip_prologue_using_sal will return 0. */
CORE_ADDR limit_pc = skip_prologue_using_sal (gdbarch, pc);
- /* We don't have a proper analyze_prologue function yet, but its result
- should be returned here. Currently GDB will just stop at the first
- instruction of function if debug information doesn't have prologue info;
- and if there is a debug info about prologue - this code path will not be
- taken at all. */
- return (limit_pc == 0 ? pc : limit_pc);
+
+ /* If there is no debug information at all, it is required to give some
+ semi-arbitrary hard limit on amount of bytes to scan during prologue
+ analysis. */
+ if (limit_pc == 0)
+ limit_pc = pc + MAX_PROLOGUE_LENGTH;
+
+ /* Find the address of the first instruction after the prologue by scanning
+ through it - no other information is needed, so pass NULL as a cache. */
+ return arc_analyze_prologue (gdbarch, pc, limit_pc, NULL);
}
/* Implement the "print_insn" gdbarch method.
that will not print, or `stream` should be different from standard
gdb_stdlog. */
-static int
+int
arc_delayed_print_insn (bfd_vma addr, struct disassemble_info *info)
{
- int (*print_insn) (bfd_vma, struct disassemble_info *);
- /* exec_bfd may be null, if GDB is run without a target BFD file. Opcodes
- will handle NULL value gracefully. */
- print_insn = arc_get_disassembler (exec_bfd);
- gdb_assert (print_insn != NULL);
- return print_insn (addr, info);
+ /* Standard BFD "machine number" field allows libopcodes disassembler to
+ distinguish ARC 600, 700 and v2 cores, however v2 encompasses both ARC EM
+ and HS, which have some difference between. There are two ways to specify
+ what is the target core:
+ 1) via the disassemble_info->disassembler_options;
+ 2) otherwise libopcodes will use private (architecture-specific) ELF
+ header.
+
+ Using disassembler_options is preferable, because it comes directly from
+ GDBserver which scanned an actual ARC core identification info. However,
+ not all GDBservers report core architecture, so as a fallback GDB still
+ should support analysis of ELF header. The libopcodes disassembly code
+ uses the section to find the BFD and the BFD to find the ELF header,
+ therefore this function should set disassemble_info->section properly.
+
+ disassembler_options was already set by non-target specific code with
+ proper options obtained via gdbarch_disassembler_options ().
+
+ This function might be called multiple times in a sequence, reusing same
+ disassemble_info. */
+ if ((info->disassembler_options == NULL) && (info->section == NULL))
+ {
+ struct obj_section *s = find_pc_section (addr);
+ if (s != NULL)
+ info->section = s->the_bfd_section;
+ }
+
+ return default_print_insn (addr, info);
}
/* Baremetal breakpoint instructions.
static const gdb_byte *
arc_sw_breakpoint_from_kind (struct gdbarch *gdbarch, int kind, int *size)
{
+ gdb_assert (kind == 2 || kind == 4);
*size = kind;
if (kind == sizeof (arc_brk_le))
}
}
-/* Implement the "unwind_pc" gdbarch method. */
+/* Implement the "frame_align" gdbarch method. */
static CORE_ADDR
-arc_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
+arc_frame_align (struct gdbarch *gdbarch, CORE_ADDR sp)
{
- int pc_regnum = gdbarch_pc_regnum (gdbarch);
- CORE_ADDR pc = frame_unwind_register_unsigned (next_frame, pc_regnum);
-
- if (arc_debug)
- debug_printf ("arc: unwind PC: %s\n", paddress (gdbarch, pc));
-
- return pc;
+ return align_down (sp, 4);
}
-/* Implement the "unwind_sp" gdbarch method. */
+/* Dump the frame info. Used for internal debugging only. */
-static CORE_ADDR
-arc_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
+static void
+arc_print_frame_cache (struct gdbarch *gdbarch, const char *message,
+ struct arc_frame_cache *cache, int addresses_known)
{
- int sp_regnum = gdbarch_sp_regnum (gdbarch);
- CORE_ADDR sp = frame_unwind_register_unsigned (next_frame, sp_regnum);
+ debug_printf ("arc: frame_info %s\n", message);
+ debug_printf ("arc: prev_sp = %s\n", paddress (gdbarch, cache->prev_sp));
+ debug_printf ("arc: frame_base_reg = %i\n", cache->frame_base_reg);
+ debug_printf ("arc: frame_base_offset = %s\n",
+ plongest (cache->frame_base_offset));
- if (arc_debug)
- debug_printf ("arc: unwind SP: %s\n", paddress (gdbarch, sp));
-
- return sp;
-}
-
-/* Implement the "frame_align" gdbarch method. */
-
-static CORE_ADDR
-arc_frame_align (struct gdbarch *gdbarch, CORE_ADDR sp)
-{
- return align_down (sp, 4);
+ for (int i = 0; i <= ARC_BLINK_REGNUM; i++)
+ {
+ if (trad_frame_addr_p (cache->saved_regs, i))
+ debug_printf ("arc: saved register %s at %s %s\n",
+ gdbarch_register_name (gdbarch, i),
+ (addresses_known) ? "address" : "offset",
+ paddress (gdbarch, cache->saved_regs[i].addr));
+ }
}
/* Frame unwinder for normal frames. */
struct gdbarch *gdbarch = get_frame_arch (this_frame);
CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
- CORE_ADDR prev_pc = get_frame_pc (this_frame);
-
CORE_ADDR entrypoint, prologue_end;
if (find_pc_partial_function (block_addr, NULL, &entrypoint, &prologue_end))
{
struct symtab_and_line sal = find_pc_line (entrypoint, 0);
+ CORE_ADDR prev_pc = get_frame_pc (this_frame);
if (sal.line == 0)
/* No line info so use current PC. */
prologue_end = prev_pc;
}
else
{
+ /* If find_pc_partial_function returned nothing then there is no symbol
+ information at all for this PC. Currently it is assumed in this case
+ that current PC is entrypoint to function and try to construct the
+ frame from that. This is, probably, suboptimal, for example ARM
+ assumes in this case that program is inside the normal frame (with
+ frame pointer). ARC, perhaps, should try to do the same. */
entrypoint = get_frame_register_unsigned (this_frame,
gdbarch_pc_regnum (gdbarch));
- prologue_end = 0;
+ prologue_end = entrypoint + MAX_PROLOGUE_LENGTH;
}
/* Allocate new frame cache instance and space for saved register info.
- * FRAME_OBSTACK_ZALLOC will initialize fields to zeroes. */
+ FRAME_OBSTACK_ZALLOC will initialize fields to zeroes. */
struct arc_frame_cache *cache
= FRAME_OBSTACK_ZALLOC (struct arc_frame_cache);
cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
- /* Should call analyze_prologue here, when it will be implemented. */
+ arc_analyze_prologue (gdbarch, entrypoint, prologue_end, cache);
+
+ if (arc_debug)
+ arc_print_frame_cache (gdbarch, "after prologue", cache, false);
+
+ CORE_ADDR unwound_fb = get_frame_register_unsigned (this_frame,
+ cache->frame_base_reg);
+ if (unwound_fb == 0)
+ return cache;
+ cache->prev_sp = unwound_fb + cache->frame_base_offset;
+
+ for (int i = 0; i <= ARC_LAST_CORE_REGNUM; i++)
+ {
+ if (trad_frame_addr_p (cache->saved_regs, i))
+ cache->saved_regs[i].addr += cache->prev_sp;
+ }
+
+ if (arc_debug)
+ arc_print_frame_cache (gdbarch, "after previous SP found", cache, true);
return cache;
}
arc_frame_base_address
};
-/* Initialize target description for the ARC.
-
- Returns TRUE if input tdesc was valid and in this case it will assign TDESC
- and TDESC_DATA output parameters. */
-
-static int
-arc_tdesc_init (struct gdbarch_info info, const struct target_desc **tdesc,
- struct tdesc_arch_data **tdesc_data)
+static enum arc_isa
+mach_type_to_arc_isa (const unsigned long mach)
{
- if (arc_debug)
- debug_printf ("arc: Target description initialization.\n");
+ switch (mach)
+ {
+ case bfd_mach_arc_arc600:
+ case bfd_mach_arc_arc601:
+ case bfd_mach_arc_arc700:
+ return ARC_ISA_ARCV1;
+ case bfd_mach_arc_arcv2:
+ return ARC_ISA_ARCV2;
+ default:
+ internal_error (__FILE__, __LINE__,
+ _("unknown machine id %lu"), mach);
+ }
+}
- const struct target_desc *tdesc_loc = info.target_desc;
+/* See arc-tdep.h. */
- /* Depending on whether this is ARCompact or ARCv2 we will assign
- different default registers sets (which will differ in exactly two core
- registers). GDB will also refuse to accept register feature from invalid
- ISA - v2 features can be used only with v2 ARChitecture. We read
- bfd_arch_info, which looks like to be a safe bet here, as it looks like it
- is always initialized even when we don't pass any elf file to GDB at all
- (it uses default arch in this case). Also GDB will call this function
- multiple times, and if XML target description file contains architecture
- specifications, then GDB will set this architecture to info.bfd_arch_info,
- overriding value from ELF file if they are different. That means that,
- where matters, this value is always our best guess on what CPU we are
- debugging. It has been noted that architecture specified in tdesc file
- has higher precedence over ELF and even "set architecture" - that is,
- using "set architecture" command will have no effect when tdesc has "arch"
- tag. */
- /* Cannot use arc_mach_is_arcv2 (), because gdbarch is not created yet. */
- const int is_arcv2 = (info.bfd_arch_info->mach == bfd_mach_arc_arcv2);
- int is_reduced_rf;
- const char *const *core_regs;
- const char *core_feature_name;
-
- /* If target doesn't provide a description - use default one. */
- if (!tdesc_has_registers (tdesc_loc))
+arc_arch_features
+arc_arch_features_create (const bfd *abfd, const unsigned long mach)
+{
+ /* Use 4 as a fallback value. */
+ int reg_size = 4;
+
+ /* Try to guess the features parameters by looking at the binary to be
+ executed. If the user is providing a binary that does not match the
+ target, then tough luck. This is the last effort to makes sense of
+ what's going on. */
+ if (abfd != nullptr && bfd_get_flavour (abfd) == bfd_target_elf_flavour)
{
- if (is_arcv2)
- {
- tdesc_loc = tdesc_arc_v2;
- if (arc_debug)
- debug_printf ("arc: Using default register set for ARC v2.\n");
- }
+ unsigned char eclass = elf_elfheader (abfd)->e_ident[EI_CLASS];
+
+ if (eclass == ELFCLASS32)
+ reg_size = 4;
+ else if (eclass == ELFCLASS64)
+ reg_size = 8;
else
- {
- tdesc_loc = tdesc_arc_arcompact;
- if (arc_debug)
- debug_printf ("arc: Using default register set for ARCompact.\n");
- }
+ internal_error (__FILE__, __LINE__,
+ _("unknown ELF header class %d"), eclass);
}
- else
+
+ /* MACH from a bfd_arch_info struct is used here. It should be a safe
+ bet, as it looks like the struct is always initialized even when we
+ don't pass any elf file to GDB at all (it uses default arch in that
+ case). */
+ arc_isa isa = mach_type_to_arc_isa (mach);
+
+ return arc_arch_features (reg_size, isa);
+}
+
+/* Look for obsolete core feature names in TDESC. */
+
+static const struct tdesc_feature *
+find_obsolete_core_names (const struct target_desc *tdesc)
+{
+ const struct tdesc_feature *feat = nullptr;
+
+ feat = tdesc_find_feature (tdesc, ARC_CORE_V1_OBSOLETE_FEATURE_NAME);
+
+ if (feat == nullptr)
+ feat = tdesc_find_feature (tdesc, ARC_CORE_V2_OBSOLETE_FEATURE_NAME);
+
+ if (feat == nullptr)
+ feat = tdesc_find_feature
+ (tdesc, ARC_CORE_V2_REDUCED_OBSOLETE_FEATURE_NAME);
+
+ return feat;
+}
+
+/* Look for obsolete aux feature names in TDESC. */
+
+static const struct tdesc_feature *
+find_obsolete_aux_names (const struct target_desc *tdesc)
+{
+ return tdesc_find_feature (tdesc, ARC_AUX_OBSOLETE_FEATURE_NAME);
+}
+
+/* Based on the MACH value, determines which core register features set
+ must be used. */
+
+static arc_register_feature *
+determine_core_reg_feature_set (const unsigned long mach)
+{
+ switch (mach_type_to_arc_isa (mach))
{
- if (arc_debug)
- debug_printf ("arc: Using provided register set.\n");
+ case ARC_ISA_ARCV1:
+ return &arc_v1_core_reg_feature;
+ case ARC_ISA_ARCV2:
+ return &arc_v2_core_reg_feature;
+ default:
+ gdb_assert_not_reached
+ ("Unknown machine type to determine the core feature set.");
}
- gdb_assert (tdesc_loc != NULL);
-
- /* Now we can search for base registers. Core registers can be either full
- or reduced. Summary:
-
- - core.v2 + aux-minimal
- - core-reduced.v2 + aux-minimal
- - core.arcompact + aux-minimal
-
- NB: It is entirely feasible to have ARCompact with reduced core regs, but
- we ignore that because GCC doesn't support that and at the same time
- ARCompact is considered obsolete, so there is not much reason to support
- that. */
- const struct tdesc_feature *feature
- = tdesc_find_feature (tdesc_loc, core_v2_feature_name);
- if (feature != NULL)
- {
- /* Confirm that register and architecture match, to prevent accidents in
- some situations. This code will trigger an error if:
+}
- 1. XML tdesc doesn't specify arch explicitly, registers are for arch
- X, but ELF specifies arch Y.
+/* At the moment, there is only 1 auxiliary register features set.
+ This is a place holder for future extendability. */
- 2. XML tdesc specifies arch X, but contains registers for arch Y.
+static const arc_register_feature *
+determine_aux_reg_feature_set ()
+{
+ return &arc_common_aux_reg_feature;
+}
- It will not protect from case where XML or ELF specify arch X,
- registers are for the same arch X, but the real target is arch Y. To
- detect this case we need to check IDENTITY register. */
- if (!is_arcv2)
- {
- arc_print (_("Error: ARC v2 target description supplied for "
- "non-ARCv2 target.\n"));
- return FALSE;
- }
+/* Update accumulator register names (ACCH/ACCL) for r58 and r59 in the
+ register sets. The endianness determines the assignment:
- is_reduced_rf = FALSE;
- core_feature_name = core_v2_feature_name;
- core_regs = core_v2_register_names;
- }
- else
+ ,------.------.
+ | acch | accl |
+ ,----|------+------|
+ | LE | r59 | r58 |
+ | BE | r58 | r59 |
+ `----^------^------' */
+
+static void
+arc_update_acc_reg_names (const int byte_order)
+{
+ const char *r58_alias
+ = byte_order == BFD_ENDIAN_LITTLE ? "accl" : "acch";
+ const char *r59_alias
+ = byte_order == BFD_ENDIAN_LITTLE ? "acch" : "accl";
+
+ /* Subscript 1 must be OK because those registers have 2 names. */
+ arc_v1_core_reg_feature.registers[ARC_R58_REGNUM].names[1] = r58_alias;
+ arc_v1_core_reg_feature.registers[ARC_R59_REGNUM].names[1] = r59_alias;
+ arc_v2_core_reg_feature.registers[ARC_R58_REGNUM].names[1] = r58_alias;
+ arc_v2_core_reg_feature.registers[ARC_R59_REGNUM].names[1] = r59_alias;
+}
+
+/* Go through all the registers in REG_SET and check if they exist
+ in FEATURE. The TDESC_DATA is updated with the register number
+ in REG_SET if it is found in the feature. If a required register
+ is not found, this function returns false. */
+
+static bool
+arc_check_tdesc_feature (struct tdesc_arch_data *tdesc_data,
+ const struct tdesc_feature *feature,
+ const struct arc_register_feature *reg_set)
+{
+ for (const auto ® : reg_set->registers)
{
- feature = tdesc_find_feature (tdesc_loc, core_reduced_v2_feature_name);
- if (feature != NULL)
+ bool found = false;
+
+ for (const char *name : reg.names)
{
- if (!is_arcv2)
- {
- arc_print (_("Error: ARC v2 target description supplied for "
- "non-ARCv2 target.\n"));
- return FALSE;
- }
+ found
+ = tdesc_numbered_register (feature, tdesc_data, reg.regnum, name);
- is_reduced_rf = TRUE;
- core_feature_name = core_reduced_v2_feature_name;
- core_regs = core_v2_register_names;
+ if (found)
+ break;
}
- else
+
+ if (!found && reg.required_p)
{
- feature = tdesc_find_feature (tdesc_loc,
- core_arcompact_feature_name);
- if (feature != NULL)
- {
- if (is_arcv2)
- {
- arc_print (_("Error: ARCompact target description supplied "
- "for non-ARCompact target.\n"));
- return FALSE;
- }
-
- is_reduced_rf = FALSE;
- core_feature_name = core_arcompact_feature_name;
- core_regs = core_arcompact_register_names;
- }
- else
+ std::ostringstream reg_names;
+ for (std::size_t i = 0; i < reg.names.size(); ++i)
{
- arc_print (_("Error: Couldn't find core register feature in "
- "supplied target description."));
- return FALSE;
+ if (i == 0)
+ reg_names << "'" << reg.names[0] << "'";
+ else
+ reg_names << " or '" << reg.names[0] << "'";
}
+ arc_print (_("Error: Cannot find required register(s) %s "
+ "in feature '%s'.\n"), reg_names.str ().c_str (),
+ feature->name.c_str ());
+ return false;
}
}
- struct tdesc_arch_data *tdesc_data_loc = tdesc_data_alloc ();
+ return true;
+}
- gdb_assert (feature != NULL);
- int valid_p = 1;
+/* Check for the existance of "lp_start" and "lp_end" in target description.
+ If both are present, assume there is hardware loop support in the target.
+ This can be improved by looking into "lpc_size" field of "isa_config"
+ auxiliary register. */
- for (int i = 0; i <= ARC_LAST_CORE_REGNUM; i++)
+static bool
+arc_check_for_hw_loops (const struct target_desc *tdesc,
+ struct tdesc_arch_data *data)
+{
+ const auto feature_aux = tdesc_find_feature (tdesc, ARC_AUX_FEATURE_NAME);
+ const auto aux_regset = determine_aux_reg_feature_set ();
+
+ if (feature_aux == nullptr)
+ return false;
+
+ bool hw_loop_p = false;
+ const auto lp_start_name =
+ aux_regset->registers[ARC_LP_START_REGNUM - ARC_FIRST_AUX_REGNUM].names[0];
+ const auto lp_end_name =
+ aux_regset->registers[ARC_LP_END_REGNUM - ARC_FIRST_AUX_REGNUM].names[0];
+
+ hw_loop_p = tdesc_numbered_register (feature_aux, data,
+ ARC_LP_START_REGNUM, lp_start_name);
+ hw_loop_p &= tdesc_numbered_register (feature_aux, data,
+ ARC_LP_END_REGNUM, lp_end_name);
+
+ return hw_loop_p;
+}
+
+/* Initialize target description for the ARC.
+
+ Returns true if input TDESC was valid and in this case it will assign TDESC
+ and TDESC_DATA output parameters. */
+
+static bool
+arc_tdesc_init (struct gdbarch_info info, const struct target_desc **tdesc,
+ tdesc_arch_data_up *tdesc_data)
+{
+ const struct target_desc *tdesc_loc = info.target_desc;
+ if (arc_debug)
+ debug_printf ("arc: Target description initialization.\n");
+
+ /* If target doesn't provide a description, use the default ones. */
+ if (!tdesc_has_registers (tdesc_loc))
{
- /* If rf16, then skip extra registers. */
- if (is_reduced_rf && ((i >= ARC_R4_REGNUM && i <= ARC_R9_REGNUM)
- || (i >= ARC_R16_REGNUM && i <= ARC_R25_REGNUM)))
- continue;
-
- valid_p = tdesc_numbered_register (feature, tdesc_data_loc, i,
- core_regs[i]);
-
- /* - Ignore errors in extension registers - they are optional.
- - Ignore missing ILINK because it doesn't make sense for Linux.
- - Ignore missing ILINK2 when architecture is ARCompact, because it
- doesn't make sense for Linux targets.
-
- In theory those optional registers should be in separate features, but
- that would create numerous but tiny features, which looks like an
- overengineering of a rather simple task. */
- if (!valid_p && (i <= ARC_SP_REGNUM || i == ARC_BLINK_REGNUM
- || i == ARC_LP_COUNT_REGNUM || i == ARC_PCL_REGNUM
- || (i == ARC_R30_REGNUM && is_arcv2)))
- {
- arc_print (_("Error: Cannot find required register `%s' in "
- "feature `%s'.\n"), core_regs[i], core_feature_name);
- tdesc_data_cleanup (tdesc_data_loc);
- return FALSE;
- }
+ arc_arch_features features
+ = arc_arch_features_create (info.abfd,
+ info.bfd_arch_info->mach);
+ tdesc_loc = arc_lookup_target_description (features);
}
+ gdb_assert (tdesc_loc != nullptr);
+
+ if (arc_debug)
+ debug_printf ("arc: Have got a target description\n");
+
+ const struct tdesc_feature *feature_core
+ = tdesc_find_feature (tdesc_loc, ARC_CORE_FEATURE_NAME);
+ const struct tdesc_feature *feature_aux
+ = tdesc_find_feature (tdesc_loc, ARC_AUX_FEATURE_NAME);
- /* Mandatory AUX registeres are intentionally few and are common between
- ARCompact and ARC v2, so same code can be used for both. */
- feature = tdesc_find_feature (tdesc_loc, aux_minimal_feature_name);
- if (feature == NULL)
+ /* Maybe there still is a chance to salvage the input. */
+ if (feature_core == nullptr)
+ feature_core = find_obsolete_core_names (tdesc_loc);
+ if (feature_aux == nullptr)
+ feature_aux = find_obsolete_aux_names (tdesc_loc);
+
+ if (feature_core == nullptr)
{
- arc_print (_("Error: Cannot find required feature `%s' in supplied "
- "target description.\n"), aux_minimal_feature_name);
- tdesc_data_cleanup (tdesc_data_loc);
- return FALSE;
+ arc_print (_("Error: Cannot find required feature '%s' in supplied "
+ "target description.\n"), ARC_CORE_FEATURE_NAME);
+ return false;
}
- for (int i = ARC_FIRST_AUX_REGNUM; i <= ARC_LAST_AUX_REGNUM; i++)
+ if (feature_aux == nullptr)
{
- const char *name = aux_minimal_register_names[i - ARC_FIRST_AUX_REGNUM];
- valid_p = tdesc_numbered_register (feature, tdesc_data_loc, i, name);
- if (!valid_p)
- {
- arc_print (_("Error: Cannot find required register `%s' "
- "in feature `%s'.\n"),
- name, tdesc_feature_name (feature));
- tdesc_data_cleanup (tdesc_data_loc);
- return FALSE;
- }
+ arc_print (_("Error: Cannot find required feature '%s' in supplied "
+ "target description.\n"), ARC_AUX_FEATURE_NAME);
+ return false;
+ }
+
+ const arc_register_feature *arc_core_reg_feature
+ = determine_core_reg_feature_set (info.bfd_arch_info->mach);
+ const arc_register_feature *arc_aux_reg_feature
+ = determine_aux_reg_feature_set ();
+
+ tdesc_arch_data_up tdesc_data_loc = tdesc_data_alloc ();
+
+ arc_update_acc_reg_names (info.byte_order);
+
+ bool valid_p = arc_check_tdesc_feature (tdesc_data_loc.get (),
+ feature_core,
+ arc_core_reg_feature);
+
+ valid_p &= arc_check_tdesc_feature (tdesc_data_loc.get (),
+ feature_aux,
+ arc_aux_reg_feature);
+
+ if (!valid_p)
+ {
+ if (arc_debug)
+ debug_printf ("arc: Target description is not valid\n");
+ return false;
}
*tdesc = tdesc_loc;
- *tdesc_data = tdesc_data_loc;
+ *tdesc_data = std::move (tdesc_data_loc);
+
+ return true;
+}
- return TRUE;
+/* Implement the type_align gdbarch function. */
+
+static ULONGEST
+arc_type_align (struct gdbarch *gdbarch, struct type *type)
+{
+ switch (type->code ())
+ {
+ case TYPE_CODE_PTR:
+ case TYPE_CODE_FUNC:
+ case TYPE_CODE_FLAGS:
+ case TYPE_CODE_INT:
+ case TYPE_CODE_RANGE:
+ case TYPE_CODE_FLT:
+ case TYPE_CODE_ENUM:
+ case TYPE_CODE_REF:
+ case TYPE_CODE_RVALUE_REF:
+ case TYPE_CODE_CHAR:
+ case TYPE_CODE_BOOL:
+ case TYPE_CODE_DECFLOAT:
+ case TYPE_CODE_METHODPTR:
+ case TYPE_CODE_MEMBERPTR:
+ type = check_typedef (type);
+ return std::min<ULONGEST> (4, TYPE_LENGTH (type));
+ default:
+ return 0;
+ }
}
/* Implement the "init" gdbarch method. */
arc_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
{
const struct target_desc *tdesc;
- struct tdesc_arch_data *tdesc_data;
+ tdesc_arch_data_up tdesc_data;
if (arc_debug)
debug_printf ("arc: Architecture initialization.\n");
if (!arc_tdesc_init (info, &tdesc, &tdesc_data))
- return NULL;
+ return nullptr;
/* Allocate the ARC-private target-dependent information structure, and the
GDB target-independent information structure. */
- struct gdbarch_tdep *tdep = XCNEW (struct gdbarch_tdep);
+ gdb::unique_xmalloc_ptr<struct gdbarch_tdep> tdep
+ (XCNEW (struct gdbarch_tdep));
tdep->jb_pc = -1; /* No longjmp support by default. */
- struct gdbarch *gdbarch = gdbarch_alloc (&info, tdep);
+ tdep->has_hw_loops = arc_check_for_hw_loops (tdesc, tdesc_data.get ());
+ struct gdbarch *gdbarch = gdbarch_alloc (&info, tdep.release ());
/* Data types. */
set_gdbarch_short_bit (gdbarch, 16);
set_gdbarch_int_bit (gdbarch, 32);
set_gdbarch_long_bit (gdbarch, 32);
set_gdbarch_long_long_bit (gdbarch, 64);
- set_gdbarch_long_long_align_bit (gdbarch, 32);
+ set_gdbarch_type_align (gdbarch, arc_type_align);
set_gdbarch_float_bit (gdbarch, 32);
set_gdbarch_float_format (gdbarch, floatformats_ieee_single);
set_gdbarch_double_bit (gdbarch, 64);
set_gdbarch_ps_regnum (gdbarch, ARC_STATUS32_REGNUM);
set_gdbarch_fp0_regnum (gdbarch, -1); /* No FPU registers. */
- set_gdbarch_dummy_id (gdbarch, arc_dummy_id);
set_gdbarch_push_dummy_call (gdbarch, arc_push_dummy_call);
set_gdbarch_push_dummy_code (gdbarch, arc_push_dummy_code);
else
set_gdbarch_decr_pc_after_break (gdbarch, 2);
- set_gdbarch_unwind_pc (gdbarch, arc_unwind_pc);
- set_gdbarch_unwind_sp (gdbarch, arc_unwind_sp);
-
set_gdbarch_frame_align (gdbarch, arc_frame_align);
set_gdbarch_print_insn (gdbarch, arc_delayed_print_insn);
It can override functions set earlier. */
gdbarch_init_osabi (info, gdbarch);
- if (tdep->jb_pc >= 0)
+ if (gdbarch_tdep (gdbarch)->jb_pc >= 0)
set_gdbarch_get_longjmp_target (gdbarch, arc_get_longjmp_target);
- tdesc_use_registers (gdbarch, tdesc, tdesc_data);
+ /* Disassembler options. Enforce CPU if it was specified in XML target
+ description, otherwise use default method of determining CPU (ELF private
+ header). */
+ if (info.target_desc != NULL)
+ {
+ const struct bfd_arch_info *tdesc_arch
+ = tdesc_architecture (info.target_desc);
+ if (tdesc_arch != NULL)
+ {
+ xfree (arc_disassembler_options);
+ /* FIXME: It is not really good to change disassembler options
+ behind the scene, because that might override options
+ specified by the user. However as of now ARC doesn't support
+ `set disassembler-options' hence this code is the only place
+ where options are changed. It also changes options for all
+ existing gdbarches, which also can be problematic, if
+ arc_gdbarch_init will start reusing existing gdbarch
+ instances. */
+ /* Target description specifies a BFD architecture, which is
+ different from ARC cpu, as accepted by disassembler (and most
+ other ARC tools), because cpu values are much more fine grained -
+ there can be multiple cpu values per single BFD architecture. As
+ a result this code should translate architecture to some cpu
+ value. Since there is no info on exact cpu configuration, it is
+ best to use the most feature-rich CPU, so that disassembler will
+ recognize all instructions available to the specified
+ architecture. */
+ switch (tdesc_arch->mach)
+ {
+ case bfd_mach_arc_arc601:
+ arc_disassembler_options = xstrdup ("cpu=arc601");
+ break;
+ case bfd_mach_arc_arc600:
+ arc_disassembler_options = xstrdup ("cpu=arc600");
+ break;
+ case bfd_mach_arc_arc700:
+ arc_disassembler_options = xstrdup ("cpu=arc700");
+ break;
+ case bfd_mach_arc_arcv2:
+ /* Machine arcv2 has three arches: ARCv2, EM and HS; where ARCv2
+ is treated as EM. */
+ if (arc_arch_is_hs (tdesc_arch))
+ arc_disassembler_options = xstrdup ("cpu=hs38_linux");
+ else
+ arc_disassembler_options = xstrdup ("cpu=em4_fpuda");
+ break;
+ default:
+ arc_disassembler_options = NULL;
+ break;
+ }
+ set_gdbarch_disassembler_options (gdbarch,
+ &arc_disassembler_options);
+ }
+ }
+
+ tdesc_use_registers (gdbarch, tdesc, std::move (tdesc_data));
return gdbarch;
}
fprintf_unfiltered (file, "arc_dump_tdep: jb_pc = %i\n", tdep->jb_pc);
}
-/* Suppress warning from -Wmissing-prototypes. */
-extern initialize_file_ftype _initialize_arc_tdep;
+/* This command accepts single argument - address of instruction to
+ disassemble. */
+static void
+dump_arc_instruction_command (const char *args, int from_tty)
+{
+ struct value *val;
+ if (args != NULL && strlen (args) > 0)
+ val = evaluate_expression (parse_expression (args).get ());
+ else
+ val = access_value_history (0);
+ record_latest_value (val);
+
+ CORE_ADDR address = value_as_address (val);
+ struct arc_instruction insn;
+ struct disassemble_info di = arc_disassemble_info (target_gdbarch ());
+ arc_insn_decode (address, &di, arc_delayed_print_insn, &insn);
+ arc_insn_dump (insn);
+}
+
+void _initialize_arc_tdep ();
void
-_initialize_arc_tdep (void)
+_initialize_arc_tdep ()
{
gdbarch_register (bfd_arch_arc, arc_gdbarch_init, arc_dump_tdep);
- initialize_tdesc_arc_v2 ();
- initialize_tdesc_arc_arcompact ();
-
/* Register ARC-specific commands with gdb. */
+ /* Add root prefix command for "maintenance print arc" commands. */
+ add_show_prefix_cmd ("arc", class_maintenance,
+ _("ARC-specific maintenance commands for printing GDB "
+ "internal state."),
+ &maintenance_print_arc_list, "maintenance print arc ",
+ 0, &maintenanceprintlist);
+
+ add_cmd ("arc-instruction", class_maintenance,
+ dump_arc_instruction_command,
+ _("Dump arc_instruction structure for specified address."),
+ &maintenance_print_arc_list);
+
/* Debug internals for ARC GDB. */
add_setshow_zinteger_cmd ("arc", class_maintenance,
&arc_debug,